advertisement
Please read and understand this manual before attempting installation of the product.
Us nua
X Series
User Guide
August, 2015
V1.4
1 / 28
Us nua
Statement
If the user manual doesn’t help you to solve the problem, please call our technology center for technical support.
Notice
1. Installation Environment
Keep away from the places for high-temperature, heat source and direct sunlight;
Keep away from water and if wet, power off immediately.
Avoid using in the damp environment; the reference range for operation humidity is below
85%RH.
Avoid using in too hot or too cold environment, the reference range for operation temperature is -10℃~ +40℃
Please install it horizontally or wall mount, avoid strenuous vibration and do not place other items on top of the unit.
2. Transport and Handling
Please handle the item carefully.
Do not move the item between too hot and too cold areas.
Please disconnect the item from the mains before moving.
Notice:
1.
Do not fall down the camera or beat it strongly.
2.
Do not touch the optical components for the image sensor, such as the lens, if necessary, please place a clean and moistened cloth with alcohol and wipe the dirt gently; When not in use, please place the dust cover onto the item to protect the image sensor.
3.
Do not aim the camera directly into the sun or at other intense light sources that could affect the image quality, this will also shorten the service life for the image sensor.
4.
Keep away from laser when it is working, otherwise the image sensor can be damaged.
5.
If the equipment is not working properly, please contact the store or the service center, do
2 / 28
Us nua not disassemble or modify the equipment in any way.
Index
3 / 28
Us nua
1 Product Introduction
1.1.Product Overview
Thank you for choosing X series high definition SmartP2P IP Camera, the IP Camera combines a high definition digital video camera with network connectivity and a powerful web server to bring high definition video to your desktop from anywhere on your local network or over the Internet. It includes indoor HD PTZ camera, indoor HD cube camera, outdoor HD waterproof camera etc. It is very suitable for home, shops, offices and so on.
Product features：
Support High profile H.264 encoding, 3 kinds of resolution video stream simultaneously, suitable for
Local, Internet and Cross-platform view;
Support Wi-Fi protocol 802.11b/g/n；
Support WPS/QSS one key Wi-Fi configuration;
Support one touch Wi-Fi configuration on mobile phone before connect to the network;
Support max. 64G SD/TF card storage for the alarm video and pictures, timing snapshot and recording, support MP4 format；
Built-in web server, use one port to send all the data, users can facilitates network setting；
Support IE/Firefox/Chrome/Safari browser to view video and configure deice;
Support P2P private network through transmission via manufacturer cloud platform;
Provide IOS/Android mobile phone Apps;
Provide Windows/Mac OS PC client software.
1.2.Product Exposition
Please check carefully if all listed items are included in the package, it includes camera, power adapter, network cable, installation bracket. If anything missing, please contact vendor in time.
The camera functions maybe different due to different product model, the main functions as below:
Main chip and sensor: Due to main control chip and sensor is different, so the camera support different resolution:720P, 1080P and above;
Power input port： Check power supply if 5V or 12V. Plug right power supply, or it will damage the camera or cannot run. We suggest to use the default power adapter.
RJ45 Port：Network port；
Wi-Fi function: The device features Wi-Fi function, built-in Wi-Fi module and antenna. The Wi-Fi antenna includes built-in Wi-Fi antenna, integration antenna, separated antenna and so on. The
4 / 28
Us nua separated antenna would be packed with the camera in the gift box, users should install it to camera before it works.
IR-CUT： the infrared light in, which make the picture more true;
Lens: Due to focus length of lens is different, so vision angle of lens is different. Please twist the lens for best effect if the video is fuzzy;
PTZ: Control PTZ remotely, view video from several vision angle. Some device have PTZ function and some device have not PTZ due to the product cover is different, and PTZ moving angle maybe different;
SD socket：Some product use SD socket and some use MicroSD socket due to the products cover are different, Max support 64GB memory card;
MIC inside：Can collect the sound from camera workplace;
Speaker inside：can play sound from device start, talking and alarm;
Audio in port：If the camera without MIC in it, you can connect extra MIC to collect sound;
Audio out port：If the camera without speaker in it, you can connect extra sound systems;
Alarm in port：Connect with switchable sensor, check sensor signal if high or low to judge if detect any event;
Alarm out Port: Connect with external alarm device, control device alarm action when detect any event;
Reset button: After the camera started, press and hold the reset button for at least 10 seconds, it restores default settings and reboot; press and hold the reset button for 3 seconds to set up the
Wi-Fi by using WPS/QSS; press the reset button briefly, the Wi-Fi indicator will flashes for a few seconds while the camera was connecting with Wi-Fi connection, you can assess Wi-Fi signal intensity by the flash frequency, the faster flash, the stronger signal;
Wi-Fi indicator：Blue LED for Wi-Fi indicator that be used to display Wi-Fi work state, such as off, slow flash, fast flash, steady work etc;
Work status
indicator:Red LED is operation indicator that displays the state of equipment,there are off, slow flash and flashlights flash, when someone access video,otherwise slow flash;
POE function：The function that supply power to camera through network cable. But you need the camera with POE module. the device connect to POE switcher by a network cable and POE switcher supply power for device through the network cable;
PIR function：The device with PIR sensor, used for detect the human movement, it trigger alarm if detect any abnormal.
5 / 28
Us nua
2 Device Connection
2.1.Connection Diagram
IP Camera
IP Camera
Router
Internet
Computer
Smartphone
Local Network
Figure1
Power on the camera by attaching the power adapter, and then connect the camera and router by network cable, so you can visit the camera via computer in LAN and view camera video as <<3. View video by browser>>
You can also connect camera and router by Wi-Fi, you need to configure Wi-Fi of the camera
2.2.Wi-Fi Setting
You can setting up the Wi-Fi as the following three way.
2.2.1. Configuration via network cable connection
Connect the camera and router by network cable as Figure1, please login the camera as <<3.View
video by browser>>, access to system configuration interface to finish the setting as<<
setting>> .Pull up the network cable, then you can connect the router by Wi-Fi.
2.2.2. WPS/QSS One key configure Wi-Fi
Power on the camera and wait for 1 minute, the camera started, hold on reset button 3 seconds, and then click “WPS/QSS” button of the router ， the camera and router will be configured Wi-Fi as
WPS/QSS protocol, after configuration successfully, the blue Wi-Fi indicator of the camera will quickly flash several times, and then it will be connected to router automatically and the blue indicator will be always on.
Notice: Due to some router do not support WPS/QSS function, so you can not use the configuration way.
6 / 28
Us nua
Figure2
2.2.3. Mobile Phone Setting please make sure the smartphone is connected WiFi ,Install the iSmartViewPro App in android phone or iPhone at first, open the App, access to More interface, select “One key configure Wi-Fi” and fill in Wi-Fi password, and then click configure to finish the setting as Figure3.
Figure3
Tips:
Before configuration, please power on the camera, after 5 minutes, you can configure the camera
(blue Wi-Fi indicator flash slowly),otherwise you can’t configure, and must power on the camera again;
Move mobile phone speaker to camera MIC, click Configure;（please confirm if the camera have
MIC, otherwise the configuration will be unsuccessfully)
After configuring successfully, the blue Wi-Fi indicator will flash several times quickly, and then connect to router automatically and the blue indicator is always on. You can click Configure several times when the configuration is unsuccessfully.
7 / 28
3 View Video by Browser
3.1.Access to camera webpage and install Plug-in
Double click to Open the “SearchPro” in the attached CD and click Search as Figure 4.
Us nua
Figure4
Select the founded device and double click it to open browser automatically, enter user name and password at popup dialog to login camera webpage as Figure5.
Tips: default username/password:admin/123456, please modify the password for safety.
Figure5
Need to download plug-in when first use, click “download plug-in” as figure 6, click Run to install it.
8 / 28
Figure6
3.2.View Live Video
Access to Live Video interface, it plays video automatically as Figure7.
Us nua
Figure7
Stop video Play video Listen Talk Snapshot Record Zoom in/out
Multiview Show/Hide control panel 1920x1080/1280x720 640x360 320x180
Cruise Horizontally Cruise Vertically Stop Cruise Centre Return to Homepage
Note:
1. You can view one or four video in a screen, need to set up the cameras in 5.1.1.5 multiple setting.
2. You can click to zoom in and out the video, 1x, 2x, 3x, 4x optional.
3. The first stream will change to 1920x1080 or 1280x720 automatically according to different camera.
9 / 28
Us nua
4 Query and Playback SD Record by Browser
4.1.Playback Video
Click Playback Video to access to SD record playback interface, click record date which you want to query ,click Search to list recording file, select one to playback it, also can click download button to download the file as Figure8.
Figure8
5 D
evice Configuration and Local Setting
5.1.Device Configuration
5.1.1. System
5.1.1.1. Device Status
You can view current user, network connection way, Mac address, SD status and internet IP address of the camera as Figure9.
10 / 28
Us nua
5.1.1.2. Time Setting
Figure9
Figure10
11 / 28
Us nua
5.1.1.3. Pan&Tilt Setting
In Pan/Tilt setting, you can set Pan/Tilt speed, cruise laps(1~10 laps) and whether enable or disabl e motion detection alarm function when Pan/Tilt works.
Call preset: 1. preset 1-8 is the setting place after the camera restart.
2. Back to the place which is setted before camera restart: when you call preset NO.9, the camera will be back to the place where power off or restart after finishing self-checking.
Figure11
5.1.1.4. Others Setting
You can turn off Status LED and Wi-Fi LED of the camera in others setting as Figure12.
Figure12
12 / 28
5.1.1.5. Multiple Settings
Us nua
Figure13
Please set up multiple devices at first, then you can view 1 or 4 split screen at chapter 3.2 browse interface.As Figure13
5.1.1.6. System Maintenance
The system maintenance includes System setting and Restart timing setting. You can set up reboot, backup setting, restore backup setting, upgrade camera and timing reboot etc as Figure14.
Figure14
13 / 28
Us nua
5.1.1.7. Device information
You can modify device name and check system firmware version, system firmware time and Web UI firmware here as Figure15.
Figure15
5.1.2. Network
5.1.2.1. IP Address Setting
You can modify IP address of the camera here, there is no default IP address, it is DHCP.as Figure16
Figure16
14 / 28
5.1.2.2. Port Setting
You can change webpage HTTP port here as Figure17.
Us nua
Figure17
5.1.2.3. Wi-Fi Setting
Click Search and enable Wi-Fi, then select the wireless router you want to connect, enter password of the router, click Save to finish the Wi-Fi configuration. Click Test to check if your settings are successful or not as Figure18.
Figure18
15 / 28
Us nua
5.1.2.4. Port Forwarding
Access to port forwarding, you can enable UPNP port forwarding and check the status of it as
Figure19.
Figure19
5.1.2.5. DDNS Setting
You can enable manufacturer’s DDNS and set up third party DDNS (the third party DDNS support
3322.org/Dyndns.org/No-ip.com now, the manufacturer provide a free DDNS for every camera.as
Figure20
16 / 28
Us nua
Figure20
5.1.2.6. RTSP Setting
You can set up RTSP port, also can off RTSP authentication as Figure21.
Figure21
You can view video by some general RTSP stream media software, for example, VLC. The visit link as below：
First stream：rtsp://user:password@IP:rtsp port/live/ch0
Second stream：rtsp://User:password@IP:rtsp port/live/ch1
Third stream：rtsp://user:password@IP:rtsp port/live/ch2
17 / 28
Us nua
5.1.2.7. Onvif Setting
Enter into Onvif setting interface, you can enable or disable Onvif authentification.As
Figure 22.
Figure 22
5.1.2.8. FTP Setting
Access to FTP setting, please fill in relative FTP parameters as the following case to achieve the
FTP transfer as Figure23.
Figure23
5.1.2.9. SMTP（E-mail）Setting
Please fill in relative parameters as the following case to achieve the E-mail transfer, as Figure24.
18 / 28
Us nua
Figure24
5.1.3. Audio and Video
5.1.3.1. Video Encoding Setting
Access to Video Encoding setting, you can set up AC frequency and video stream as Figure25.
AC frequency: 50HZ and 60HZ optional;
Video stream: Bit rate (256~4096kbps), frame rate (1~30fps), video encoding control etc;
Tips: you can set up the video with audio or not.
19 / 28
Us nua
Figure25
5.1.3.2. Volume Setting
Access to Volume setting, you can adjust the volume of MIC and speaker as Figure26.
Figure26
5.1.3.3. Image Setting
Access to Image Setting, you can flip and mirror the image, also can adjust the brightness, contrast, saturation and hue of image for getting best color effect as Figure27.
20 / 28
Us nua
Figure27
5.1.3.4. OSD Setting
Access to OSD setting, you can overlay the time and name in Live video as Figure28.
Figure28
5.1.3.5. Night vision Settings
Access to Night vision Settings, you can set up IR LED and IRCUT as Figure29.
21 / 28
Us nua
Figure29
5.1.4. Safety
5.1.4.1
User Setting
Access to User management, you can add or edit the user as Figure30.
Figure30
Tips: After setting up, click save and refresh button, the entering info will display in the webpage.
22 / 28
Us nua
5.1.4.2
IP Flitering
You can set up the IP filtering to allow or deny some IP address to visit the device as below. As
Figure31
Figure31
5.1.4.3 Private Area
Also you can set up some mask area you don’t want to be monitored, please click “Start setting” to enable the function, and then ticked a window, it will show a red frame in video, click the frame, it will become green, click and slide it you can move or resize it, and then click “Save” to finish the setting as below. As Figure32
Figure32
23 / 28
Us nua
5.1.5. Alarm
5.1.5.1. IO Detect
Access to IO detector, can enable detect function and set up input signal type as Figure33.
Figure33
5.1.5.2. Motion Detection
Access to motion detection, you can set up Max 4 detection area, also can set up the sensitivity for every area as Figure34.
Figure34
24 / 28
Us nua
5.1.5.3. Audio Detection
Access to audio detection, you can enable audio detection and set up sensitivity of it as Figure35.
Figure35
5.1.5.4. Linkage alarm setting
You can set up IO detect, motion detection and audio detect, it can linkage to trigger the action: snapshot to Email or FTP server or SD card, recording to FTP server or SD card, and trigger IO output as
Figure36
Tips: The usage for combination of alarm trigger in alarm trigger type:
For example, you enable the audio detection and motion detection, so the camera is enabled combination of alarm trigger, it will perform the action in alarm action setting when the audio detect and motion detection detect any change.
Figure36
25 / 28
Us nua
5.1.5.5. Protected duration setting
After setting up alarm detect type and alarm trigger linkage, you need to set up protected duration.
You must set up it, then the camera perform trigger linkage; the time format is 7 days, 24 hours per day,
15 minutes per a block as Figure37.
Figure37
5.1.6. Storage
5.1.6.1. SD/TF Management
Access to SD management, you can check and download recording and snapshot file in SD card, and check SD card remaining capacity, format SD as Figure38.
Figure38
26 / 28
Us nua
5.1.6.2. SD Capture setting（Timing Snapshot）
Access to SD capture, you can enable timing snapshot and set up snapshot time interval and snapshot duration; time format is 7 days, 24 hours per day, 15 minutes per a block as Figure39.
Figure39
5.1.6.3. SD Card Recording Setting
Access to SD Card Recording Setting, you can enable SD recording and set up recording duration for every file; time format is as 7 days, 24 hours a day, 15 minutes per a block as Figure 40.
Tips: it will overwrite SD recording file automatically by default, also overwrite previous recording file when the SD space is full.
Figure40
27 / 28
5.1.7. Log
Access to Log menu, you can check the user operation log as Figure41.
Us nua
Figure41
5.2.Local Setting
Access to local configuration, you can set up recording path, snapshot path and recording duration as Figure42.
Tips:
You must use administrator to run the browse, then recording path and snapshot path can be save successfully at above IE9; the default recording path is D:\HYRec.
You can enable to show motion detection frame when viewing video.
Figure42
28 / 28
advertisement
Related manuals
advertisement