Specifications

Component

Top Compartment

Top Drawer (x2)

Middle Drawer

Bottom Drawer

Bottom Shelf

Size

27″ W x 15-1/2″ L x 2″ H

12-1/4″ W x 14-1/2″ L x 2″ H

26-3/4″ W x 14-1/2″ L x 2-3/4″ H

26″ W x 14-1/2″ L x 4″ H

30-1/4″ W x 16″ L x 3″ H total Combined Weight Capacity

(Evenly distributed from bottom up.)

Weight Capacity

200 lb

30 lb each

50 lb

70 lb

200 lb

580 lb

Page 2 For technical questions, please call 1-800-444-3353.

Item 61634

impoRtant SaFEty inFoRmation

assembly precautions

1. Assemble only according to these instructions.

Improper assembly can create hazards.

2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.

3. Keep assembly area clean and well lit.

4. Keep bystanders out of the area during assembly.

use precautions

5. Do not assemble when tired or when under the influence of alcohol, drugs or medication.

6. Weight capacity and other product capabilities apply to properly and completely assembled product only.

7. Assemble on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Cart.

to pREVEnt SERiouS injuRy and dEath FRom tipping:

1. do not Sit, Stand oR Climb on thiS itEm. 7. Do not lift using handle(s).

Do not lift while loaded.

2. This product is not a toy nor a toy chest.

Do not allow children to play with or near this item.

8. Lock Swivel Casters after moving.

3. Do not exceed weight capacities, evenly distributed from bottom up.

be aware of dynamic loading!

Sudden load movement may briefly create excess load causing product failure.

9. Do not mount on truck bed or any other moving object.

10. Use as intended only.

11. Inspect before every use; do not use if parts are loose or damaged.

4. Do not open more than one Drawer at once. Lid must be open for Drawers to be unlocked.

5. Close Lid to lock all Drawers, then lock

Lid with Key before moving.

12. Maintain product labels and nameplates.

These carry important safety information.

If unreadable or missing, contact

Harbor Freight Tools for a replacement.

6. Use only on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Cart.

Do not roll Cart over concrete seams or other rough/uneven surfaces.

Item 61634 For technical questions, please call 1-800-444-3353.

Page 3

assembly instructions

Read the EntiRE impoRtant SaFEty inFoRmation section at the beginning of this document including all text under subheadings therein before set up or use of this product.

note: Finger tighten hardware until assembly is complete.

6. Attach Posts with Cross Supports to the outside corners of the Bottom Shelf, using sixteen Frame Bolt Sets.

1. Assemble on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Cart.

2. Attach two Swivel Casters (15) to one side of the

Bottom Shelf (12), using eight Caster Bolt Sets (18).

3. Attach two Locking Swivel Casters (16) to the other side, using eight Caster Bolt Sets.

locking

Swivel Caster bottom

Shelf bolt nut

Swivel

Caster nut

Washer bolt

Figure a

4. Attach a Cross Support (11) between two

Posts (13), using four Frame Bolt Sets (17).

5. Repeat with remaining Cross Support and Posts. post

Cross

Support bolt nut

Figure C

WaRning! The chest is heavy; do not attempt to lift and lower onto Cross Supports without assistance.

7. With assistance, lift up the chest, then lower it carefully between the Posts until its bottom edges rest on the Cross Supports.

8. Attach the Handle to lower holes on same side as Locking Swivel Casters, using two Handle Bolt Sets (24).

9. Secure Posts to chest using fourteen Frame Bolt Sets.

Chest nut

(not visible) handle bolt

Page 4

Figure b

Figure d

10. Tighten all hardware.

For technical questions, please call 1-800-444-3353.

Item 61634

operating instructions

Read the EntiRE impoRtant SaFEty inFoRmation section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

1. Open Lid to unlock Drawers, then fill Cart evenly, from bottom to top. Do not exceed weight capacities.

2. Close Lid to lock all Drawers, then lock Lid with Key.

4. Roll Cart to a flat, level, hard and smooth surface capable of safely supporting a fully loaded Cart. Do not roll Cart over concrete seams or other rough/uneven surfaces.

3. Unlock Swivel Casters. 5. Lock Swivel Casters.

maintenance and Servicing

procedures not specifically explained in this manual must be performed only by a qualified technician.

to pREVEnt SERiouS injuRy FRom tool FailuRE: do not use damaged equipment. if any part becomes damaged, have the problem corrected before further use.

1. pERiodiCally, inspect the general condition of the Cart. Check for:

• loose hardware,

• misalignment or binding of moving parts,

• brake operation,

• caster swivel function and movement,

• cracked or broken parts,

• any other condition that may affect its safe operation.

2. Wipe external surfaces of the Cart with clean cloth.

3. Lubricate Drawer Slides as needed.

Item 61634 For technical questions, please call 1-800-444-3353.

Page 5

plEaSE REad thE FolloWing CaREFully

THe mAnufACTurer AnD/Or DiSTribuTOr HAS prOviDeD THe pArTS LiST AnD ASSembLy DiAgrAm in THiS DOCumenT AS A referenCe TOOL OnLy. neiTHer THe mAnufACTurer Or DiSTribuTOr mAKeS Any repreSenTATiOn Or WArrAnTy Of Any KinD TO THe buyer THAT He Or SHe iS quALifieD TO mAKe Any repAirS TO THe prODuCT, Or THAT He Or SHe iS quALifieD TO repLACe

Any pArTS Of THe prODuCT. in fACT, THe mAnufACTurer AnD/Or DiSTribuTOr expreSSLy

STATeS THAT ALL repAirS AnD pArTS repLACemenTS SHOuLD be unDerTAKen by CerTifieD AnD

LiCenSeD TeCHniCiAnS, AnD nOT by THe buyer. THe buyer ASSumeS ALL riSK AnD LiAbiLiTy

AriSing OuT Of HiS Or Her repAirS TO THe OriginAL prODuCT Or repLACemenT pArTS

THereTO, Or AriSing OuT Of HiS Or Her inSTALLATiOn Of repLACemenT pArTS THereTO.

parts list and diagram

parts list

part

1 Lid

description

2 Lock bar

3 Lock

4 Drawer Handle - Short

5 Drawer Handle - Long

6 Drawer Slides (not shown)

7 Top Drawer

8 Middle Drawer

9 Bottom Drawer

10 Rivet

11 Cross Support

12 Bottom Shelf

13 Posts

Qty

1

1

4

2

1

2

1

4

2

2

8

2

1

part

14 Handle

description Qty

1

15 Swivel Caster

16 Locking Swivel Caster

17 Frame Bolt Set:

Bolt (M8x14), Nut (M8)

18 Caster Bolt Set:

Bolt (M6x12), Washer (Ø6), Nut (M6)

16

19 Top Compartment Liner (not shown)

20 Top Drawer Liner (not shown)

21 middle/bottom Drawer Liner (not shown) 2

22 Lid Hinge 2

23 bottom Shelf Liner (not shown) 1

24 Handle Bolt Set: Bolt (M8x16), Nut (M8) 2

25 Key 2

1

1

2

2

38

Page 6 For technical questions, please call 1-800-444-3353.

Item 61634

assembly diagram

13

17

7

8

9

10

13

22

2

4

25

3

4

5

18

11

15

15

1

13

11

12

24

14

24

13

16

16

Record Serial number here:

note: If product has no serial number, record month and year of purchase instead.

Item 61634

note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts.

For technical questions, please call 1-800-444-3353.

Page 7

limited 90 day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THiS WArrAnTy iS expreSSLy in Lieu Of ALL OTHer

WArrAnTieS, expreSS Or impLieD, inCLuDing THe WArrAnTieS Of merCHAnTAbiLiTy AnD fiTneSS.

To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.

If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353