TM QUICK START GUIDE Horizontal Shaft Gas Engine Item: 60363 Engine Components A. B. C. D. Fuel Cap Muffler Air Filter Oil Drain Plug E. F. G. H. I. Throttle Engine Switch Starter Handle Choke Fuel Valve For technical questions, please call 1-800-520-0882. Visit our website at: http://www.harborfreight.com Email our technical support at: firstname.lastname@example.org READ AND UNDERSTAND USER MANUAL BEFORE USE. 14d 10i READ AND UNDERSTAND USER MANUAL BEFORE USE. TM STOP Add Fluids Starting Procedure Check oil and fuel levels If needed, fill as shown below Move 1/3 toward fast Add fuel to within 1" of the rim of the tank Add oil to engine crankcase Note: Use regular Unleaded 87 Octane. Engine not designed for E85 Ethanol blend. Assembly O 4. SWITCH ON Mount the engine securely in place 2. OPEN FUEL VALVE 1. CLOSE CHOKE 3. ADJUST THROTTLE ON I 5. PULL START 6. CHOKE TO RUN IMPORTANT: Breaking-in the engine will help to ensure proper equipment and engine performance. The operational break-in period will last about 3 hours of use. During this period: • Do not apply a heavy load. • Do not operate the engine at its maximum speed.