HP LaserJet 1320N User's Manual

HP LaserJet
1160, 1320, 1320n,
1320tn, 1320nw
Use
Printer configurations
Below are the standard configurations for the HP LaserJet 1160 and HP LaserJet 1320
series printers.
hp LaserJet 1160 printer
●
20 ppm (Letter), 19 ppm (A4)
●
First page out as low as 8.5 seconds
●
1200 dpi effective output quality (600 x 600 dpi with Resolution Enhancement
technology (REt) with FastRes 1200)
●
250-sheet enclosed input tray (Tray 2)
●
Single-sheet priority input slot (Tray 1)
●
EconoMode (saves toner)
●
Print watermarks, booklets, multiple pages per sheet (N-up), and first page on different
media than rest of the document
●
16 MB RAM
●
2,500-page print cartridge
●
Host-based and PCL 5e (printer automatically determines and switches to the
appropriate language)
●
Compatible with USB 2.0 specifications
●
IEEE-1284B parallel port
●
Windows® 98, Me, NT® (print driver only), 2000, Server 2003 (printer driver only), XP 32bit, XP 64-bit (printer driver only)
●
Mac OS 9.1 and later (printer driver only)
●
Power switch
●
HP toolbox (provides printer status information, troubleshooting information, and printer
configuration information)
●
26 PCL fonts
hp LaserJet 1320 printer
ENWW
●
22 ppm (Letter), 21 ppm (A4)
●
First page out as low as 8.5 seconds
●
ProRes 1200 (provides fine-line detail at 1200 x 1200 dpi)
●
600 dpi (provides 600 x 600 dpi output with Resolution Enhancement Technology (REt)
for improved text)
●
250-sheet enclosed input tray (Tray 2)
●
Single-sheet priority input slot (Tray 1)
●
Optional additional 250-sheet input tray (Tray 3)
●
Automatic two-sided (duplex) printing
Printer configurations
3
●
EconoMode (saves toner)
●
Print watermarks, booklets, multiple pages per sheet (N-up), and first page on different
media than rest of the document
●
16 MB RAM
●
Memory is upgradeable to 144 MB
●
2,500- or 6,000-page print cartridge
●
PCL 6, PCL 5e, and PostScript® Level 2 emulation (printer automatically determines and
switches to the appropriate language)
●
Compatible with USB 2.0 specifications
●
IEEE-1284B parallel port
●
Windows 98, Me, NT (printer driver only), 2000, Server 2003 (printer driver only), XP 32bit, XP 64-bit (printer driver only)
●
Mac OS 9.1 and later (printer driver only)
●
Mac OS X v10.1 (printer driver only), v10.2 and later
●
Power switch
●
HP toolbox (provides printer status information, troubleshooting information, and printer
configuration information)
●
46 HP fonts
●
35 PS fonts
hp LaserJet 1320n printer
The HP LaserJet 1320n printer includes an Internal HP Jetdirect network port instead of the
IEEE-1284B parallel port.
hp LaserJet 1320tn printer
The HP LaserJet 1320tn printer includes all of the features of the HP LaserJet 1320n printer
with the addition of a second 250-sheet input tray (Tray 3).
hp LaserJet 1320nw printer
The HP LaserJet 1320nw printer includes all of the features of the HP LaserJet 1320n
printer with the addition of integrated 802.11b/g wireless connectivity.
Note
4
For more information about this product, see the HP LaserJet 1320nw wireless user guide.
Chapter 1 Printer basics
ENWW
Understanding print quality settings
Print quality settings affect how light or dark the print is on the page and the style that the
graphics are printed. You can also use the print quality settings to optimize the print quality
for a specific media type. See Optimizing print quality for media types for more information.
You can change the settings in the printer Properties to accommodate the types of jobs you
are printing. The following are the settings:
●
1200 dpi: (HP LaserJet 1320 series printer only) This setting uses ProRes 1200 to
provide fine-line detail at 1200 x 1200 dpi.
●
1200 dpi effective output quality: This setting provides 1200 dpi effective output
quality using FastRes 1200.
●
600 dpi: This setting provides 600 x 600 dpi output with Resolution Enhancement
technology (REt) for improved text.
●
EconoMode (Saves Toner): Text is printed using less toner. This setting is useful when
you are printing drafts. You can turn on this option independently of other print quality
settings. See Using EconoMode (saves toner) for more information.
1. Access the printer Properties (or Printing Preferences in Windows 2000 and XP). See
Printer Properties (driver) for instructions.
2. On the Paper/Quality tab or the Finishing tab (the Paper Type/Quality tab for some
Mac drivers), select the print quality setting you want to use.
Note
Not all printer features are available in all drivers or operating systems. See the printer
Properties (driver) online Help for information about availability of features for that driver.
Note
To change the print quality settings for all future print jobs, access the Properties through the
Start menu in the Windows task bar. To change the print quality settings only for the current
software application's use, access the Properties through the Print Setup menu in the
application you are using to print. See Printer Properties (driver) for more information.
40
Chapter 4 Printing tasks
ENWW
Electrical specifications
WARNING!
Power requirements are based on the country/region where the printer is sold. Do not
convert operating voltages. Doing so might damage the printer and void the product warranty.
HP LaserJet 1160 printer
Power requirements (110)
110-127v (+/-10%), 50/60 Hz (+/-2)
Power requirements (220)
220v-240v (+/-10%), 50/60 Hz (+/-2 Hz)
Power consumption
●
During printing (20 ppm): 340 watts (average)
●
During Ready (Standby) and PowerSave*:
4 Watts
* Instant on fuser technology
Minimum recommended circuit capacity for
typical product
●
Off: <1 watts
●
4.5 amps at 115 volts
●
2.6 amps at 230 volts
HP LaserJet 1320 printer
Power requirements (110)
110-127v (+/-10%), 50/60 Hz (+/-2)
Power requirements (220)
220v-240v (+/-10%), 50/60 Hz (+/-2 Hz)
Power consumption
●
During printing (22 ppm): 340 watts (average)
●
During Ready (Standby) and PowerSave*:
6 Watts
* Instant on fuser technology
Minimum recommended circuit capacity for
typical product
●
Off: <1 watts
●
4.5 amps at 115 volts
●
2.6 amps at 230 volts
HP LaserJet 1320n printer
Power requirements (110)
110-127v (+/-10%), 50/60 Hz (+/-2)
Power requirements (220)
220v-240v (+/-10%), 50/60 Hz (+/-2 Hz)
Power consumption
●
During printing (22 ppm): 345 watts (average)
●
During Ready (Standby) and PowerSave*:
6 Watts
* Instant on fuser technology
Minimum recommended circuit capacity for
typical product
126
Appendix A Printer specifications
●
Off: <1 watts
●
4.5 amps at 115 volts
●
2.6 amps at 230 volts
ENWW
HP LaserJet 1320nw printer
Power requirements (110)
110-127v (+/-10%), 50/60 Hz (+/-2)
Power requirements (220)
220v-240v (+/-10%), 50/60 Hz (+/-2 Hz)
Power consumption
●
During printing (22 ppm): 345 watts (average)
●
During Ready (Standby) and PowerSave*:
6 Watts
* Instant on fuser technology
Minimum recommended circuit capacity for
typical product
●
Off: <1 watts
●
4.5 amps at 115 volts
●
2.6 amps at 230 volts
Note
Values are current as of April 1, 2004. Values are subject to change without notice. See
http://www.hp.com/support/lj1160/ or http://www.hp.com/support/lj1320/ for current
information.
Note
The power reported is the highest value measured for monochrome printing using all
standard voltages.
Note
The default time from Ready mode to PowerSave mode and the recovery time from
PowerSave mode to the start of printing is negligible (less than 10 seconds) because of the
instant on fusing.
Note
The heat dissipation in Ready mode is 20 BTU/hour.
ENWW
Electrical specifications
127
Physical specifications
Dimensions
Weight (2,500-page cartridge installed)
●
Width: 350 mm (16.8 inches)
●
Depth: 352 mm (13.9 inches)
●
Height: 256 mm (10.0 inches)
HP LaserJet 1160 printer: 10.7 kg (23.6 lb)
HP LaserJet 1320 series printer: 11.3 kg (24.9 lb)
Note
128
Values are current as of April 1, 2004. Values are subject to change without notice. See
http://www.hp.com/support/lj1160/ or http://www.hp.com/support/lj1320/ for current
information.
Appendix A Printer specifications
ENWW
Printer capacities and ratings
Print speed
HP LaserJet 1160 printer:
●
20 ppm (Letter), 19 ppm (A4)
●
First page out in as low as 8.5 seconds
HP LaserJet 1320 series printer:
●
22 ppm (Letter), 21 ppm (A4)
●
First page out in as low as 8.5 seconds
Main input tray (Tray 2) capacity
250 sheets of regular weight 75 g/m2 (20 lb) paper
Single-sheet priority input slot (Tray 1) capacity
1 sheet of paper up to 163 g/m2 (43 lb) paper or
1 envelope
Optional input tray (Tray 3) capacity
250 sheets of regular weight 75 g/m2 (20 lb) paper
(HP LaserJet 1320 series printer or Q2485A)
Top (face down) output bin capacity
125 sheets of regular weight 75 g/m2 (20 lb) paper
Minimum paper size
76 by 127 mm (3 by 5 inches)
Maximum paper size
216 by 356 mm (8.5 by 14 inches)
Media weight
Output bin: 60 to 105 g/m2 (16 to 28 lbs)
Straight through media path: 60 to 163 g/m2
(16 to 43 lbs)
Base memory
16 MB of RAM
Upgrade memory expansion
One DIMM slot available for a 16, 32, 64, or
128 MB RAM DIMM
HP LaserJet 1320 series printer only
Print resolution
Duty cycle
ENWW
●
1200 dpi: (HP LaserJet 1320 series printer
only) This setting uses ProRes 1200 to
provide fine-line detail at 1200 x 1200 dpi.
●
1200 effective dpi: This setting provides
1200 dpi effective output quality using
FastRes 1200.
●
600 dpi: This setting provides 600 x 600 dpi
output with Resolution Enhancement
technology (REt) for improved text.
●
10,000 single-sided pages per month
(maximum)
●
1,000 single-sided pages per month
(average)
PCL
PCL 5e, PCL 6
PS
PostScript Level 2 emulation
Printer capacities and ratings
129
Memory specifications
130
Base memory
16 MB RAM
Upgrade memory expansion
100-pin, 66 MHz minimum speed
Appendix A Printer specifications
ENWW