HP LASERJET M1120 User's Manual

HP LaserJet M1120 MFP Series – Scan
Use scan
How do I?
Steps to perform
1 Lift the flatbed scanner cover.
Scan by using HP LaserJet Scan
2 Place the original document face-down on the flatbed
scanner with the upper-left corner of the document at
the corner indicated by the icon on the scanner.
3 Gently close the lid.
4 In the HP program group, select Scan to to start HP
LaserJet Scan.
5 Select a scanning destination.
6 Click Scan.
NOTE: OK should indicate the action that you want to
accomplish.
1
© 2007 Copyright Hewlett-Packard
Development Company, L.P.
www.hp.com
HP LaserJet M1120 MFP Series – Scan
E-mail my scan
How do I?
Steps to perform
Scan to a file, e-mail, or software program
1 Lift the flatbed scanner cover.
2 Place the original document face-down on the flatbed
scanner with the upper-left corner of the document at
the corner indicated by the icon on the scanner.
3 Gently close the lid.
Scan by using HP LaserJet Scan (Windows)
4 In the HP program group, select Scan to to start HP
LaserJet Scan.
5 Select a scanning destination.
6 Click Scan.
1
© 2007 Copyright Hewlett-Packard
Development Company, L.P.
www.hp.com
HP LaserJet M1120 MFP Series – Scan
Send my scan to a folder
How do I?
Steps to perform
1 Lift the flatbed scanner cover.
Scan to a folder
2 Place the original document face-down on the flatbed
scanner with the upper-left corner of the document at
the corner indicated by the icon on the scanner.
3 Gently close the lid.
Scan by using HP LaserJet Scan (Windows)
4 In the HP program group, select Scan to to start HP
LaserJet Scan.
5 Select a scanning destination.
NOTE: Destination must be set up.
6 Click Scan.
1
© 2007 Copyright Hewlett-Packard
Development Company, L.P.
www.hp.com
HP LaserJet M1120 MFP Series – Scan
Make my scan look better
How do I?
Steps to perform
Clean the scanner glass
1 Turn off the product, unplug the power cord from the
electrical socket, and raise the lid.
NOTE: Dirty glass, from fingerprints, smudges, hair, and
so on, slows down performance and affects the accuracy
of special features such as fit-to-page and copy.
2 Clean the glass by using a soft cloth or sponge that
has been moistened with nonabrasive glass cleaner.
CAUTION: Do not use abrasives, acetone, benzene,
ammonia, ethyl alcohol, or carbon tetrachloride on any
part of the product; these can damage the product. Do
not place liquids directly on the glass. They might
seep under it and damage the product.
3 To prevent spotting, dry the glass by using a chamois
or cellulose sponge.
1
© 2007 Copyright Hewlett-Packard
Development Company, L.P.
www.hp.com