Hunter Engineering 4042-T Brochure
Add to my manuals20 Pages
Hunter Engineering 4042-T is an upgraded version of the 4042 wheel balancer with additional capabilities for handling larger wheels and tires. The 4042-T is perfect for use in high-volume tire shops, dealerships and automotive repair centers.
The 4042-T features a heavy-duty frame and spindle that can support wheels up to 30" in diameter and 12" wide. Automatic inflation of the tire with a built-in air compressor makes it easier to achieve accurate balance measurements. The digital readout display shows imbalance measurements in both static and dynamic modes, making it easy to identify and correct any imbalance issues.
advertisement
2
TCR1 accessories
TCR1 tire changer
The standard Revolution tire changer comes equipped to handle most tire and wheel combinations.
NEW!
Part Number
A RP6-3784
B RP6-1506
C 69-1394-2
Description
Paste
Paste brush
Pin protector (2)
D RP11-2020689 Valve installer
E 221-659-2 Bead starting tool
F RP11-2020688 Valve puller
G 192-233-1 In-between cone (2)
H 192-225-1
I 192-226-1
J 111-154-1
Small polymer cone (2)
Double-sided polymer cone (2)
Spare roller
Glasses K 179-15-2
L 221-713-2
M 69-1392-2
Polymer mount head (2)
Rubber platten cover (2)
F
E
D
A
B
C
G
H
I
J
M
K
L
The following options can be used to enhance serviceability of specialized applications.
Flange plate kit
20-2830-3
Optional kit is ideal for plastic clad wheels or reverse wheels where maximum protection is needed.
Dual wheel adaptor
20-2964-1
Optional adaptor adds clamping capability for dual wheels, 19.5 in. wheels and other wheels with large center holes.
Camera kit
20-2945-1
Camera kit records tire changing. Can be used to verify correct usage and training.
TCA-series accessories
TCA34 and TCA28
The standard Auto34 tire changer comes equipped to handle virtually all common tire and wheel combinations.
Part Number Description
A RP6-G1000A80 Quick clamp
B RP6-710090480 Pin protector (2)
C RP6-710012940 Pin extension
D 145-341-2 Air chuck
E RP6-710090730 Traction bar
F 148-133-2
G 179-15-2
Lubrication oil
Glasses
H 221-659-2 Bead starting tool
I RP6-3784
J RP6-1506
Paste
Paste brush
K RP6-710013421 Support plate cover (2)
L RP6-710014120 Toolhead (2)
M RP6-1157 Two-sided cone
N RP6-G1000A86 Mirror
A
K
B
C
D
E
H
The following options can be used to enhance serviceability of specialized applications.
L
G
M
F
N
I
J
Contoured press head
RP6-G1000A94
Optional bead press head for special applications.
Required by BMW.
(TCA34 only)
Flange plate kit – RP6-G1000A87
Optional kit is ideal for plastic-clad wheels or reverse wheels where maximum protection is needed.
Basic flange plate
RP6-G1000A123
Optional kit handles plastic-clad wheels without the need of reverse applications.
PAX ® tire system kit
RP6-G1000A73
Optional kit for servicing Michelin ®
PAX ® systems. (TCA34 only)
19.5 inch adaptor – 20-2341-1
Adds clamping capability for 19.5 in. wheels with large center holes.
3
4
TC-series standard accessories
TC3900,TC3700 and
TC3300 series models
Each Hunter TC-series tire changer includes a variety of accessories to help service a wide range of tire and wheel combinations.
A
Bead press arm
(20-2502-1)
Suitable for TC3700,
TC3510, TC3500 and
TC3300 series tire changers. Standard on
TC3900 and TC3715.
Part Number Description
A 20-2502-1 Bead press arm
B 20-2565-1 Plus arm device
C RP6-G1000A80 Quick clamp
D 179-15-2
E 148-133-2
F RP6-3784
G RP6-1506
Safety glasses
Lubrication oil
Mounting paste
Paste brush
H RP6-710090730 Traction bar
I RP6-G1000A67 28" bead depressor tail w/ traction bar
J RP6-1157 Two-sided cone
K RP6-G1000A7 Mechanical bead roller
L RP6-710013421 Support plate cover (2)
M RP6-G800A11 Shovel protector (2)
N 221-675-2 Extra mount head
O RP6-710090480 Pin protector (2)
P RP6-710012940 Drive pin extension
Q RP6-0326
R 145-341-2
Bead protector sleeve
Air chuck
S RP6-G1000A11 “HM” bead lever
T 221-659-2 Bead starting tool
TC3900 TC3715 TC3700 TC3315 TC3305 TC3300
✔ ✔ ✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
B
Plus arm device
(20-2565-1)
Suitable for TC3300 model tire changers.
(Not compatible with
TC3250.)
NEW!
NEW!
TC3900SS TC3715SS
C
D
J
K
E
L
M
N
S
O
P
Q R
F
G
H
T
I
NEW!
TC3700SS TC3305 TC3300
5
TC-series accessories
TC3900, TC3700, TC3510,
TC3300 & TC3250
19.5-inch truck center cone adaptor kit 20-2341-1
Adapts large center-bore wheels to center-clamp tire changers
(TC3700, TC3300, TCA34, TCA28).
Rubber protection plate for center-clamp tire changers – RP6-710013421
Soft, rubber plate protects rim when servicing reverse wheels.
Intended to be removed when not servicing reverse wheels.
Flange plate for center-clamp tire changers
RP6-G1000A87
Flange plates for clad wheels
RP6-G1000A123
6
Long flange plate pins
RP6-G1000A102
Optional pins are longer, allowing servicing of reverse wheels with extra deep spokes. For use with
Hunter center-clamp fl ange plate
(RP6-G1000A87).
Short drive pin – 135-486-2
Useful when servicing some reverse wheels. Also useful in combination with older 20-2341-1 19.5 kits and
GM 16 in. dually wheel service. Now included as standard with 19.5 in. kit.
Drive pin protectors for center-clamp tire changers
RP6-710090480
Plastic cap protects lug holes of reverse wheels when clamped face down.
Polymer mount/demount head (1 ea.) – 221-675-2
Rides closer than steel designs, reducing stress to beads when demounting and mounting low-profi le tires. Wear component designed to protect the tire and rim.
Polymer mount/demount heads (6 ea.) – 221-675-2-B
Receive the benefi ts of quantity discount pricing.
Mount/demount head, motorcycle & extra small wheel – RP6-G1000A15
Replacement polymer mount/demount head.
A.
Mount head (4)
A
B
B.
Rimsled (50)
C
Polymer head tire changer maintenance kit – 20-1506-1
Provides convenient way to store maintenance items at the tire changer. Kit includes:
A. Nylon mesh storage bag- - - - - - - - - - - - - - 166-51-2
B. Polymer mount/demount heads (6 ea.) - - - - 221-675-2
C. Bead lever protector sleeves (6 ea.) - - - - - RP6-0326
Provides additional protection for painted or plastic-clad rims.
Rimsled only fi ts “black” mount heads supplied in kit.
A. Individual demount head - - - -RP6-G1000A14
B. Rim protector (box of 50) - - - -RP6-12916
Force multiplier
RP6-G1000A23
Adds leverage when seating the mount/demount head and holding it down against the wheel.
Plastic shovel protectors (1 ea.) – RP6-G800A11
Clip-on side shovel protectors prevent damaging metal-to-metal contact when bead loosening.
7
TC-series accessories
continued...
TC3900, TC3700, TC3510,
TC3300 & TC3250
For storage of the center-shaft or center support when not in use. Attaches to the storage tray by drilling two small holes.
External rubber clamping jaw for
TC35XX /TC3250 (1 ea.) – RP6-8659
For external clamping of reverse rims. Not compatible with fi rst generation RP6-4177.
Extension arm kit for
TC35XX /TC3250 (4 ea.) – RP6-G1000A17
Extension arms available without column extension plate.
Rim securing device for
TC35XX / TC3250 – RP6-1485
For internal clamping of conical or greasy wheels.
Prevents damage to rim surface coating.
8
Steel clamping jaw (1 ea.)
RP6-2252
Replacement steel jaw for clamping arm.
For securing wheels when marring inside of rim is of no concern.
Two-sided cone for LT wheels
RP6-1157
For use with the regular-sized clamping cone when the wheel hub bore is larger than the standard cone.
A
C
B
TC3300 performance kit – 20-2707-1
Includes all items shown above. May also be ordered individually as needed.
A. Mechanical bead roller - - - - - - - - - RP6-G1000A7
B. Force multiplier - - - - - - - - - - - - - - RP6-G1000A23
C. “HM” bead lever - - - - - - - - - - - - - RP6-G1000A11
Shown (below) with optional 28" bead depressor tail with traction beam.
Mounting belt kit
RP6-G1000A8
For mounting and matching diffi cult ultra-low-profi le and runfl at tires.
Mechanical bead roller – RP6-G1000A7
Pushes the upper bead of the tire below the right hand area of the mount head keeping the tire in the proper location during mounting. Eliminates extra work to mount stiff tires.
Suitable for TCA34 tire changers with serial numbers 664 and above.
Useful to extend the clamping shaft when used with older RP6-G1000A87 fl ange plates. Standard with all new fl ange plates.
Cone cover, wheel hub protector – RP6-1156
Protects the wheel hub bore from contact when center-clamping.
9
TCX-series standard accessories
Hunter TCX-series tire changers include a variety of accessories to help service a wide range of tire and wheel combinations.
TCX-series tire changers
Part Number
A Leverless
B BPS
Description
Leverless mount head
C BP
D RP11-4-403749
E RP11-2121350
Bead press system w/ two roller arms & lift/disk
Single bead press arm
BP press cone
F RP11-2413305
G RP11-2202239
H RP6-3784
I RP6-1506
Large pressing cone
Small pressing cone
Pressing cone extension
Mounting paste 3.5 kg
Applicator brush
J RP11-5-401110 6" jaw extenders
K RP11-8-11100358 Hi-grip jaw protector
L 145-341-2 Tire infl ator/air chuck
M RP11-8-11400087 Bolt-on plastic head
N RP11-5-104797
O 179-15-2
P RP11-5-490223
Q 148-133-2
Bolt-on steel head
Safety goggles
Plastic shovel protector
Lubrication oil
R RP11-8-11400098 Bead lever protector sleeve
S 221-659-2 Bead starting tool
T RP11-8-11400293 Leverless mount head inserts
U RP11-2202106
V RP11-2020688
W RP11-2020689
X RP11-3009516
Rim edge protector
Valve stem puller
Valve core remover
Bead lever (standard)
Y RP11-8-11100369 Mount head inserts (traditional)
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
TCX575 TCX565 TCX53L TCX53 TCX51L TCX51 TCX50
✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔
✔ ✔
✔ ✔ ✔ ✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔
✔
✔
✔ ✔
✔
✔
✔
10
TCX575 TCX565
A B C
D
K
P
V
H
E F G
W
Q
L
I
M
X
R
N
J
S
T
Y
O
U
TCX53 TCX51 TCX50
11
12
Optional bead lifting/pressing tools
TCX-series tire changers
Bead press arm for TCX50 series – 20-2833-1
✔ The pressing head pushes the tire into the drop-center when demounting stiff sidewall tires, greatly reducing lever effort and risk of bead damage.
✔ The standard press cone used with the bead press arm will press the rim onto the jaws for easier clamping of stiff tires.
✔ The standard bead press roller keeps stiff tires under the mount head and guides the bead.
✔ Lifting hook.
✔ Not suitable for older TCX5X5 variations.
Standard with TCX51
✔ Uniquely centers the pressing capabilities over the center of the wheel and tire to ensure maximum service strength and rigidity.
✔ Provides effortless assistance with most diffi cult tires and custom wheels up to 26" diameter.
✔ Not suitable for older TCX5X5 variations.
Kit includes:
Bead press system with stationary arm, rotating arm & bead lifting arm
Small pressing cone - - - - - - - - - - - - - - - - RP11-2413305
Large pressing cone - - - - - - - - - - - - - - - - RP11-2121350
Pressing cone extension - - - - - - - - - - - - - RP11-2202239
Standard with TCX53
TCX-series accessories
TCX-series tire changers
Jaw extender & reducer (4 ea.) – RP11-8-11400276
Extends range by 4 inches. Reduces range by 5 inches.
High grip jaw protectors (8 ea.) – RP11-8-11100358
Polymer jaw covers prevent metal-to-metal contact when performing external clamping.
Mechanical bead roller for TCX505-550
RP11-5-400900
Optional feature used to mount stiff low-profi le tires.
Eliminates extra work to mount stiff tires.
Not compatible with leverless heads.
30 inch kit for TCX550 – RP11-8-11400162
✔ 6 inch jaw extensions with removable lands, prevent the bottom bead of the tire from pushing below the rim when the top bead is being mounted.
✔ Includes mechanical bead roller for additional press point.
✔ Shorter rollers give 2 inch greater BPS diameter capacity.
Storage shelf
Large steel shelf system expands storage capacity.
For TCX 50-53 - - - 20-2885-1
One tray standard on all TCX500s. Second standard on TCX515.
Each TCX500 can use up to 2 trays (two shown). Accessories available separately.
Not suitable for TCX50 series
13
TCX-series accessories
continued...
TCX-series tire changers
14
Polymer mount/demount head with metal bracket (1 ea.)
RP11-8-11400087
Replacement polymer mount/demount head with adapter. Wearing mount/demount head protects tire and rim from metal-to-metal contact damage.
Polymer mount/demount head
(1 ea.) – RP11-8314813
Replacement polymer mount/demount for TCX-series tire changers. Wearing component designed to protect tire and rim.
Motorcycle adaptor
RP11-2200277
NEW!
Steel mount/demount head
(1 ea.) – RP11-5-104797
Replacement steel mount/demount head.
Harley Davidson
Wheel Adaptor
RP11-2201113
Rear plastic protectors
(10 ea.) – 20-2685-3
Plastic protectors for leverless mounting heads
(10 ea.) – 20-2684-3
Front plastic protectors for leverless heads.
Replacement screw for protector
(3 required) – RP11-2-03438
Plastic shovel protectors
(4 ea.) – RP11-5-490223
Clip-on side shovel protectors prevent damage when bead loosening low-profi le tires on expensive alloy wheels.
Plastic protectors for new steel mounting heads
(10 ea.) – RP11-8-11100369
Polymer inserts for new
TCX-series steel mounting head.
Single front plastic protector for old steel mounting heads (1 ea.)
RP11-811100303S
Polymer insert for old TCX-series steel mounting head.
Plastic protector kit for old steel mount heads (10 ea.) – RP11-8-11400096
Polymer inserts for old TCX-series steel mounting head.
PAX
®
tire system tools & kits
Part Number Description
A RP6-14783 PAX arm with large roller
B RP6-41942
C 221-684-2
D RP6-8703
E RP6-11522
PAX arm with small roller (2)
Ratchet strap
Brass shaft protector
Quick-disconnect shaft
F RP6-1156
G RP6-1460
H RP6-4153
Short cone rim protector
Short cone (2)
Stroke limiters
I RP6-4100001 PAX bead levers (2)
J RP6-7042 Plastic rim protectors (4)
TC3900 / TC3700
All generations
20-2268-1
✔
✔
✔
✔
✔
✔
TC3500
20-1795-1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
TC3900, TC3700 and
TC3500 series models
E F
A
C
D
B
Hunter tire changing equipment is approved for servicing Michelin ®
PAX ® Systems.
H
I
J
PAX upgrade kits used to upgrade early TC3500’s may also require the quick-disconnect coupling bolt and center support kit (RP6-10822) to utilize the newly upgraded quick-disconnect threaded center shaft (RP6-11522) supplied in the newer PAX upgrade kits.
G
Also available...
PAX Orbiter workstation – 20-1793-1
The patented Orbiter workstation simplifi es the insertion and extraction of the PAX support ring. Operates with one foot pedal.
15
Optional wheel lift system
All models
Servicing large, heavy SUV, light-truck and custom wheels requires extra effort.
The optional pneumatic wheel lift helps prevent potential injuries and fatigue from lifting heavy wheels into place.
The pedal-controlled wheel lift quickly raises the wheel, leaving the technician’s hands free to control and position it on the tire changer clamping system.
A wheel lift can be ordered with newly purchased tire changer or separately as a retrofi t kit. See the chart below for part numbers.
Base tire changer
TCA34
TCA28
Model number with wheel lift included
Wheel lift part number if ordered separately
TCA34W
TCA28W
20-2236-1
20-2517-1
TC3900
TC3700
TC3715
TCX575
TCX565
TCX550EBPS
TCX535A
TCX535E
TCX53E
Other TCX500
TC3900W
TC3700W
TC3715W
TCX575W
TCX565W
TCX550EWBPS
TCX535AW
TCX535EW
TCX53EW
------
20-2944-1
20-2944-1
20-2944-1
20-2044-1
20-2044-1
20-2044-1
20-2045-1
20-2045-1
20-2045-1
20-2045-1
NEW!
TC3900W shown with optional
20-2944-1 wheel lift system
16
TCX575 shown with optional
20-2044-1 wheel lift system
TCA34 shown with optional
20-2236-1 wheel lift system
Integrated wheel lifts boost productivity and help prevent injury and fatigue
The Hunter wheel lift system makes servicing large wheels easy! Roll the wheel on the lift...
... activate the automated lifting device by pressing the lift foot pedal.
The lift automatically raises the wheel to an ergonomic height.
Simply position wheel as needed.
It’s that easy!
17
18
Heavy-duty tire changer accessories
Standard accessories
Part Number Description
A RP11-2105943 Tube tire bead guide
B RP11-2200041 Alloy wheel clamp jaws (4)
C RP11-2005957 Steel wheel clamp
D RP6-3784 Mounting paste
E RP11-3006365 Standard lever
F RP11-2306808 Alloy wheel clamp
G RP6-1506 Brush
H RP11-2105954 Bead lever
TCX625 TCX640
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
A
TCX625HD & TCX640HD
B
C
E F
D
G
H
TCX640HD
A. Tubeless roller – RP11-2306040
Eases bead loosening, mounting and demounting of tubeless truck and bus tires.
B. Self-centering tulip chuck extensions (4 ea.)
RP11-8-12100155
Expands clamping size capacity to 56 inches.
C. Alloy jaws insert RP11-8-12100172
For use on units with serial number iic735988 or greater.
TCX640HD
A B C
Universal series accessories
All models
B
B
A
A
Patented, high-performance bead lever dramatically reduces servicing effort. A must for servicing low-profi le tires.
B. Bead lever protector sleeve – RP6-0326
Sleeve protects wheel fl ange by allowing the bead lever to slip out of the tire instead of being dragged against the rim during demounting.
Box of 10 (RP6-0326-B).
A. Traditional flat design bead lever –
RP11-3009516
For demounting tires on conventional tire changers.
B. Bead lever sleeve protectors (4 ea.)
RP11-8-11400098
Sleeve protects wheel fl ange by allowing the bead lever to slip out of the tire instead of being dragged against the rim during demounting. For use with RP11-3009516 Bead Lever Tool.
A
A
B
C
D
B
Eases mounting of stiff low-profi le tires. Aids in faster bead sealing during infl ation. High-performance mounting paste is premixed to prevent incorrect mixing of water to liquid concentrates.
(RP6-3784-B = 8 Buckets, RP6-3784-BP = 64 Buckets [1 pallet].)
B. Brush, angled applicator – RP6-1506
Allows for proper application of mounting paste. Angled to allow easy access to the “toe area” of the bead most commonly damaged during mounting.
A. Valve core remover - - - - - - - - - - - - - - - RP11-2020689
B. Rim edge protector - - - - - - - - - - - - - - - RP11-2202106
C. Valve stem puller- - - - - - - - - - - - - - - - - RP11-2020688
D. Bead starting tool - - - - - - - - - - - - - - - - - - - 221-659-2
Lubri-Oil air equipment lubrication
148-133-2
Drop-center mounting clamp – RP6-70210E
Use mounting clamp to help position the bead into the drop-center. Not for extreme positive offset, fl at-faced rims or soft-line fl anges. (Alternative tools:
RP6-1572, RP6-7290.)
19
Universal series accessories
continued...
All models
Optional bead depressor tail helps position low-profi le tires into drop-center for mounting and demounting
Keeping the upper bead of the tire lubricated and pushed to the edge of the rim’s drop-center is crucial. This tool should be an
28-inch bead depressor tail w/ traction Bar
RP6-G1000A67
Bead depressor tail with traction bar aids in locking tire to rim & pushing low-profi le tires down into drop center for mounting.
Services up to 28 inch diameter rim.
EH2 bead depressor block RP6-12749
Traction bar
RP6-710090730
Traction bar only.
Used to lock tire to rim.
Be sure to check out other Hunter literature for more quality products from Hunter Engineering.
1114WAP4M.1.30
Copyright © 2014, Hunter Engineering Company w w w.h u n t e r.c o m
Form 4042-T, 11/14
Supersedes 4042-T, 01/14
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project