Jet Tools JBTS-10BT-3 Sell Sheet
Add to my manuals
2 Pages
The Jet Tools JBTS-10BT-3 is a 10-inch benchtop tablesaw designed for fast setup and quick cuts. Its exclusive Smooth Speed™ Belt Drive Transmission with Poly-V Belt eliminates vibration and extends motor life, while the Precision-Rule™ Measurement System provides quick identification of cutting capacity up to 24-1/2 inches. The rapid wing extension expands the work surface up to 41 inches for additional support, and the rear outfeed support provides outfeed support and converts to a left side extension.
advertisement
BUILT BETTER TO BUILD BETTER
™
10" Bench Top Tablesaw
708315LSB
Bench Top Tablesaw Sell Sheet.indd 1
708315BTC
For a fast set-up and a quick cut, choose the new
JET 10" Bench Top Tablesaw. Exclusive features include the
Smooth Speed™ Belt Drive Transmission with Poly-V Belt, which eliminates vibration to the blade, and the
Precision-Rule™ Measurement System for quick identification of cutting capacity. Keep wood supported through the cut by use of rapid extension wings and a rear outfeed support, standard on both models.
jettools.com
8/17/05 3:30:21 PM
10" BENCH TOP TABLESAW
See-through blade guard with splitter and anti-kickback fingers
Table insert for easy blade and dado changes
Rear outfeed support
Rapid wing extension
On-board storage for power cord, rip fence, miter gauge, saw blade and wrenches
Smooth Speed™
Belt Drive Transmission with Poly-V Belt
708315BTC
Precision-Rule™
Measurement
System
5
YEAR
10" BENCH TOP TABLESAW
■ Exclusive Design
Constructed with steel corner posts for the toughest applications
■ Smooth Speed™ Belt Drive
Transmission with Poly-V belt
Eliminates vibrations to the blade and extends life of motor, provides quieter operation and better transfer of power
■ Precision-Rule™ Measurement System
Provides quick identification of cutting capacity up to 24-1/2" (when wing is fully extended)
■ Rapid Wing Extension
Expands work surface up to 41" (with single extension) or 55" (with two extensions) for additional support
■ Leg Stand with Steel Storage Shelf
Converts tablesaw from benchtop to stationary
(standard with 708315LSB)
■ Precision Machined Miter Slots
Provides direct control of miter gauge resulting in better cuts
■ Dust Collection Adaptor Port
Connects either 2-1/2" shop vacuum or 4" dust collection system (standard with 708315LSB)
■ Dual Function Hand Wheel
Raises and bevels blade for quick and accurate setup
■ Rear Outfeed Support
Provides outfeed support and also converts to a left side extension
■ Contoured Side Handles
Allows easy lifting and mobility of saw
■ On-Board Storage
Convenient storage for power cord, rip fence, miter gauge, saw blade and wrenches
STOCK NUMBER 708315BTC 708315LSB
Model
Rapid Wing Extensions
Leg Stand with Steel Storage Shelf
Dust Collection Adaptor Port
Motor
Blade Diameter (in.)
Arbor Diameter (in.)
Maximum Rip Cut Capacity (in.)
Maximum Cut Depth at 45º (in.)
Maximum Cut Depth at 90º (in.)
Maximum Width of Dado (in.)
Table Height from Surface/Ground (in.)
JBTS-10BT-3
1
No
No
15 Amp, 120V
10
5/8
24-1/2
2-1/2
3
1/2
12
JBTS-10LS-2
2
Yes
Yes
15 Amp, 120V
10
5/8
24-1/2
2-1/2
3
1/2
35
Table Size without Extension Wing(s) (L x W/in.) 18 x 33
Table Size with Extension Wing(s) (L x W/in.) 18 x 41
Overall Dimensions (W x D x H/in.)
Arbor Speed (RPM, no load)
Net Weight (lbs.)
18 x 33
18 x 55
33-1/2 x 18 x 14 39 x 18 x 35
5,000
52
5,000
79
708315LSB
Stock No. 900792
10M 08/05
©2005 WMH TOOL GROUP, Inc. All Rights Reserved.
jettools.com
Bench Top Tablesaw Sell Sheet.indd 2 8/17/05 3:30:28 PM
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement