John Deere 1050C User's Manual

Purpose built.
When Deere engineers set out to design the
beginning of the 1050C Waste Handler’s story.
ultimate waste handler, they couldn’t have
To make it the best possible landfill dozer,
picked a better platform. With its full-featured
Deere engineers went right to the
hydrostatic drivetrain, John Deere’s 44-ton,
source — solid waste managers —
324-horsepower 1050C Dozer delivers auto-
to think through the solutions a
matic power management, infinite ground
purpose-built waste handler
speeds, power turns, and all kinds of hydrostat-
can provide. To learn
ically driven productivity advantages. But
what we learned,
power and nimble performance are just the
turn the page.
The rugged and reliable 1050C is one powerful performer.
Designed and built with extensive input from solid-waste
professionals like you.
With its full-featured hydrostatic drivetrain, this agile
44-ton waste handler delivers production-boosting
advantages you don’t get with other crawlers in its class.
Numerous cooling system enhancements help beat the
heat, for maximum uptime and productivity.
PAGES
2–3
1050C
324 SAE net hp
27.7- or 32-cu.-yd. blade
80,295-lb. operating weight
Three-millimeter perforations in the hood and side shields act as a “first
filter,” preventing entry of most airborne debris.
Variable-speed fans run at speeds appropriate for operating conditions to
preserve power and precious fuel.
1. Five-fin-per-inch radiator core resists plugging. Inline core tubes
make clean-out easier.
2. Hinged front grille allows easy access for maintenance and cleaning.
3. Corrugated screens and hydraulically driven fans take the heat away
from the transmission oil and engine coolant. Reversing fans engage
automatically every 30 minutes to blow away refuse and help prevent
plugging. Fans can also be operated manually from the seat as needed.
1
2
3
Increases your uptime
while keeping its cool.
“If you can’t take the heat, stay out of
its paces — this is one waste handler
the landfill.” We heard that loud and
that’s got what it takes to keep its
clear. So go ahead and put it through
cool in a hostile world.
PAGES
4–5
Relentless.
You won’t have operators standing by with the
If something’s susceptible to damage, we’ve
1050C. We sweat the details to make this
sealed, moved, re-routed, or re-engineered it —
crawler’s bulletproof design waste proof as well.
all in the name of uptime.
PAGES
6–7
Heavy-duty light package helps illuminate the way. Lights are guarded to
minimize damage.
Cab waste barrier prevents refuse from accumulating in the powertrain.
Air-conditioner condenser is mounted behind the cab for extra
protection at no extra cost.
Comprehensive hose guard system and internal routing keep hydraulic
hoses out of danger.
Tightly sealed engine compartment reduces air velocity and prevents
vacuuming of debris.
Turbocharger heat shield reduces fire risk.
1. Available front and/or rear striker bars shed material from the tracks.
2. Fuel tank guard and heavy-duty hinged bottom guards minimize
damage, especially from C&D materials. Heavy-duty reinforcement
bars protect the engine side shields and radiator.
1
2
Exclusive Final Drive Protection
You know how expensive final drive repairs can be. Only the 1050C Waste Handler
provides this level of final drive protection to keep you up and running.
Three-step protection forms a stepped
labyrinth to protect the final drives. Bolton seal guards provide the first layer of
protection. If debris gets past this point,
it encounters an oil-filled double seal
that stands guard outside the final drive.
Should debris penetrate the first oil-filled
inner seal, the oil escapes, setting off a
visual warning in the cab, alerting the
operator to shut down the machine.
The second seal maintains oil in the final
drives. It’s an early warning system that
can help avoid unscheduled downtime
and expense.
A
C
B
C
B
A
A. Final drive seal guard B. Outer seal C. Inner seal
1
All daily engine service checks are accomplished on the right side.
A conveniently located periodic maintenance chart helps ensure that
nothing is overlooked.
Deere Customer Personal Service (CPS) brings you access to online
parts orders and a wealth of technical information. It’s just another
way your John Deere dealer can help keep your operating costs low.
2
1. Replaceable half-shell bearings within the dozer push beams
provide longer component life.
2. Convenient test ports allow quick hydrostatic-drive diagnostics.
3. No need to disconnect cooling system or hydraulic hoses when
you want to tilt the cab. A built-in jack provides quick and easy
access to drivetrain components.
3
4. Turbocharged V-6 diesel delivers 324 hp at a slow 1,800 rpm
for enhanced longevity and optimum fuel economy. Wet-type
cylinder liners dissipate heat for reduced ring wear and oil
breakdown.
5. Sight gauges provide quick daily checks of hydraulic/transmission and final-drive fluids. Monitor signals an alert should
these levels drop.
6. The 1050C’s DuraTraxTM traditional oval undercarriage has only
one wear-causing forward-travel flex point. Compared to the three
flex points found on elevated sprocket undercarriages, which do
you think will last longer?
7. Bolt-on rod guides are easy to remove should cylinder repair
ever become necessary.
4
5
6
7
Big dozer,
minimal maintenance.
Your maintenance crew won’t have to crawl all
are conveniently grouped, with many behind
over this crawler to maintain it. Like all Deere
hinged side shields that open wide, simplifying
equipment, daily and periodic service points
fluid and filter checks for increased uptime.
PAGES
8–9
Major production.
This purpose-built waste handler has everything
converter transmission and clutch/brake or
it needs for maximum uptime and minimum
differential steering system, other dozers just
maintenance, plus numerous production-boost-
can’t match the 1050C’s operating ease.
Hydrostatic drive isn’t the only thing that
ing advantages.
The 1050C’s hydrostatic-drive system goes
enables the 1050C to exceed the others. Its
beyond the limits of other dozers, delivering
traditional oval undercarriage design also incor-
infinite speed control, power management, and
porates several features that help it deliver long
full power turns. With their conventional torque
life and a smooth, productive ride.
PAGES
10–11
Power management system takes the guess and work out of efficient
operation. Just set the maximum desired ground speed and the crawler
does the rest. As loads change, the drivetrain responds, automatically
powering up or down to maintain peak engine rpm and efficiency.
Infinitely variable track control lets you speed up or slow power to each
track — for smooth, full power turns of any radius. Unlike dozers with
differential steering, tight turns are possible at any travel speed.
Maintenance-free oscillating track frames utilize a unique cushioned
pivot shaft that absorbs shock loads for enhanced comfort.
1
1. Electronic monitor keeps a vigilant watch on vital machine functions.
2. Spacious and quiet walk-through air-conditioned cab is a standard
feature that provides virtually unobstructed all-around visibility and
all-day comfort.
3. Pilot-operated single lever gives intuitive, low-effort control of steering,
forward/reverse travel, and ground speed. A handle-mounted switch
selects the speed range. One-hundred percent of available power is
always applied, regardless of the selected range, for top productivity
all the time.
4. Load-sensing hydraulic system delivers low-effort metering to the
pilot-operated blade control.
2
3
4
Specifications
Engine
1050C Waste Handler
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Liebherr D 9406 TI-E A3 intercooled and turbocharged diesel; meets EPA and CARB emission non-road regulations
Engine power per ISO 9249 . . . . . . . . . . . . . 324 SAE net hp (242 kW) @ 1,800 rpm
Cylinders (wet sleeve). . . . . . . . . . . . . . . . . . V6
Displacement . . . . . . . . . . . . . . . . . . . . . . . . 793 cu. in. (13 L)
Fuel consumption, typical . . . . . . . . . . . . . . . 7.7 to 13.2 gal./hr. (29 to 50 L/h)
Maximum net torque . . . . . . . . . . . . . . . . . . 1,129 lb.-ft. (1530 Nm) @ 1,200 rpm
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . pressure system with full-flow spin-on filter and integrated oil-to-water cooler
Air cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . dual stage dry type with safety element, aspirated precleaner, and restriction indicator light
Electrical system. . . . . . . . . . . . . . . . . . . . . . 24 volt with 80-amp alternator
Cooling system . . . . . . . . . . . . . . . . . . . . . . . 5-fin-per-in. radiator with auto-reversing thermostatically controlled hydrostatic blower fan
Cold-starting aid . . . . . . . . . . . . . . . . . . . . . . flame-glow intake air heater
Transmission
Dual-path, electronic-controlled, closed-loop hydrostatic drive; load-sensing feature automatically adjusts speed and power to match changing load conditions; each
individual track is powered by a variable displacement pump and motor combination; single lever controls speed and direction; ground speed (forward and reverse)
infinite to 6.8 mph (11 km/h); decelerator pedal permits speed reduction from 6.8 mph (11 km/h) to holding; three working ranges; maximum speed-range control
switch located in single-lever handle; maximum speed in range is selected by F-N-R lever position
Forward
Reverse
Travel speeds (infinitely variable)
1st speed range . . . . . . . . . . . . . . . . 0 to 2.5 mph (0 to 4.0 km/h)
0 to 3.0 mph (0 to 4.8 km/h)
2nd speed range. . . . . . . . . . . . . . . . 0 to 4.0 mph (0 to 6.5 km/h)
0 to 4.8 mph (0 to 7.7 km/h)
3rd speed range . . . . . . . . . . . . . . . . 0 to 6.8 mph (0 to 11.0 km/h)
0 to 6.8 mph (0 to 11.0 km/h)
Final Drives
Heavy-duty, combination spur gear with double-reduction planetary final drives mounted independent of track frame and dozer push frame for isolation from shock
loads; the hydraulic drive motors are mounted to the mainframe; final drives are double sealed with electronic seal-integrity indicator and final drive seal guards
Steering
Fully modulated, infinitely variable, single-lever steering allows for full power turns and counterrotation; infinitely variable track speeds provide unlimited maneuverability and optimum control; hydrostatic steering eliminates steering clutches and brakes
Brakes
Hydrostatic (dynamic) braking stops the machine whenever the direction-control lever is moved to neutral or whenever the combined decelerator/brake pedal is fully
depressed
Automatic Park Brake
Exclusive park brake feature engages wet, multiple-disc brakes whenever the engine stops, whenever the combined decelerator/brake pedal is fully depressed, whenever the park lock lever is placed in the start position, whenever the park brake button is pushed on the dash, whenever the F-N-R control is in the neutral position
for more than seven seconds, or whenever machine motion is sensed with F-N-R in neutral position; machine cannot be driven with brake applied, reducing wear
out or need for adjustment
PAGES
12–13
Hydraulic System
1050C Waste Handler
System type . . . . . . . . . . . . . . . . . . . . . . . . . load sensing
Pressure, system relief . . . . . . . . . . . . . . . . . 2,900 psi (20 000 kPa)
Pump type . . . . . . . . . . . . . . . . . . . . . . . . . . variable-displacement piston pump with load-sensing proportional pump flow control
Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 gpm (336 L/min.) @ 1,900 rpm
Filter, return oil . . . . . . . . . . . . . . . . . . . . . . . 20 micron and 5 micron with magnetic particle attractors
Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . single joystick lever
Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . heat-treated, chrome-plated, polished cylinder rods with hardened steel pivot pins, replaceable bushings, and bolted
rod guides
Hydraulic/transmission cooling fan . . . . . . . . remote oil-to-air heat exchanger with auto-reversing thermostatically controlled hydrostatic fan
Capacities (U.S.)
Fuel tank with lockable cap (12-hr. typical
usage). . . . . . . . . . . . . . . . . . . . . . . . . . . 161 gal. (610 L)
Cooling system with recovery tank . . . . . . . . 18 gal. (68 L)
Engine oil with spin-on filter . . . . . . . . . . . . . 6.3 gal. (24 L)
Final drive (each) . . . . . . . . . . . . . . . . . . . . . 5.5 gal. (21 L)
Hydraulic/hydrostatic reservoir with filter . . . 55 gal. (210 L)
Splitter drive . . . . . . . . . . . . . . . . . . . . . . . . . 6.3 qt. (6 L)
All power train and hydraulic systems allow for up to 45-degree maximum operation.
Undercarriage
John Deere Dura-Trax™ deep heat-treated track links and through-hardened rollers for maximum wear resistance; front and rear track guides and sprocket guards;
extreme-service single-bar grouser shoes with trapezoidal holes
Sprocket . . . . . . . . . . . . . . . . . . . . . . . . . . . . segmented with recesses
Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . sealed and lubricated
Track shoes, each side . . . . . . . . . . . . . . . . . 44
Ground contact area
24-in. (610 mm) shoes . . . . . . . . . . . . . . 6,000 sq. in. (38 700 cm2)
26-in. (660 mm) shoes . . . . . . . . . . . . . . 6,495 sq. in. (41 900 cm2)
28-in. (711 mm) shoes . . . . . . . . . . . . . . 6,990 sq. in. (45 100 cm2)
Ground clearance, minimum . . . . . . . . . . . . . 25 in. (625 mm)
Length of track on ground . . . . . . . . . . . . . . 125 in. (3174 mm)
Track gauge, standard . . . . . . . . . . . . . . . . . 86 in. (2180 mm)
Oscillation at front idler. . . . . . . . . . . . . . . . . 13 in. (330 mm)
Track rollers, each side. . . . . . . . . . . . . . . . . 7
Carrier rollers, each side. . . . . . . . . . . . . . . . 2
Track pitch . . . . . . . . . . . . . . . . . . . . . . . . . . 8.5 in. (215 mm)
Ground Pressures
Semi-U Dozer Blade
With Push Beams
and Trash Rack
With base waste package, 175-lb. (79 kg)
operator, and full fuel tank
24-in. (610 mm) shoes . . . . . . . . . . . . . . 12.9 psi (89 kPa)
26-in. (660 mm) shoes . . . . . . . . . . . . . . 12.0 psi (83 kPa)
28-in. (711 mm) shoes . . . . . . . . . . . . . . 11.2 psi (77 kPa)
U Dozer Blade With
Push Beam and
Trash Rack
13.2 psi (91 kPa)
12.3 psi (85 kPa)
11.5 psi (79 kPa)
SAE Operating Weights
Semi-U Dozer Blade
With Push Beams
and Trash Rack
With base waste package, 175-lb. (79 kg)
operator, and full fuel tank
24-in. (610 mm) shoes . . . . . . . . . . . . . . 77,445 lb. (35 129 kg)
26-in. (660 mm) shoes . . . . . . . . . . . . . . 77,951 lb. (35 358 kg)
28-in. (711 mm) shoes . . . . . . . . . . . . . . 78,455 lb. (35 587 kg)
U Dozer Blade WIth
Push Beams and
Trash Rack
Tractor Shipping
Weight Without Blade
or Attachments
79,285 lb. (35 963 kg)
79,791 lb. (36 193 kg)
80,295 lb. (36 422 kg)
62,985 lb. (28 570 kg)
63,491 lb. (28,799 kg)
63,995 lb. (29,028 kg)
A
B
H
J
E
K
M
D
C
L
G
N
F
I
Dimensions
1050C Waste Handler
A Height over cab (including grousers) . . . . 143 in. (3640 mm)
B Height over engine cover . . . . . . . . . . . . 107 in. (2725 mm)
C Overall length (without blade) . . . . . . . . . 192 in. (4885 mm)
D Height of grousers . . . . . . . . . . . . . . . . . 3.3 in. (84 mm)
E Ground clearance . . . . . . . . . . . . . . . . . . 25 in. (625 mm)
F Total width over blade-mounting
trunnions . . . . . . . . . . . . . . . . . . . . . . . . 124 in. (3145 mm)
G Width over shoes
24 in. (610 mm) . . . . . . . . . . . . . . . . . . . 110 in. (2790 mm)
26 in. (660 mm) . . . . . . . . . . . . . . . . . . . 112 in. (2845 mm)
28 in. (711 mm) . . . . . . . . . . . . . . . . . . . 114 in. (2891 mm)
Blades with Optional Trash Rack
Semi-U Dozer Blade
Blade weight (including push beams,
trunnion mounts, cupped end bits,
tilt cylinder, and trash rack). . . . . . . . . . . 14,460 lb. (6558 kg)
Blade capacity . . . . . . . . . . . . . . . . . . . . . . . 27.7 cu. yd. (21.2 m3)
H Height of blade . . . . . . . . . . . . . . . . . . . . 97 in. (2450 mm)
I Width of blade. . . . . . . . . . . . . . . . . . . . . 165 in. (4200 mm)
J Lifting height. . . . . . . . . . . . . . . . . . . . . . 55 in. (1400 mm)
K Blade digging depth . . . . . . . . . . . . . . . . 22 in. (570 mm)
L Maximum blade pitch adjustment . . . . . . 10 degrees
M Maximum tilt. . . . . . . . . . . . . . . . . . . . . . 39 in. (1000 mm)
N Overall length . . . . . . . . . . . . . . . . . . . . . 252 in. (6415 mm)
U Dozer Blade
16,300 lb. (7395 kg)
32.0 cu. yd. (24.5 m3)
94 in. (2387 mm)
170 in. (4325 mm)
55 in. (1400 mm)
22 in. (570 mm)
10 degrees
40 in. (1025 mm)
272 in. (6915 mm)
PAGES
14–15
Optional or Special Equipment
1050C Waste Handler
Add (+) or deduct (–) lb. (kg) as indicated to base weight for units with
26-in. (660 mm) extreme-service shoes . . . . 506 lb. (230 kg)
28-in. (711 mm) extreme-service shoes . . . . 1,010 lb. (458 kg)
Auxiliary hydraulics for rear attachment . . . . 326 lb. (148 kg)
Full-length rock guards. . . . . . . . . . . . . . . . . 617 lb. (280 kg)
Heavy-duty cutting edges . . . . . . . . . . . . . . . 176 lb. (80 kg)
Power-pitch push arms with dual-tilt
cylinders with hydraulics. . . . . . . . . . . . . 650 lb. (295 kg)
Rear counterweight with retrieval hitch✶ . . . 6,613 lb. (3000 kg)
9,261 lb. (4201 kg)
8,000 lb. (3629 kg) with storage compartment
Rigid heavy-duty drawbar✶ . . . . . . . . . . . . . 1,460 lb. (662 kg)
Rippers✶ . . . . . . . . . . . . . . . . . . . . . . . . . . . 9,390 lb. (4259 kg) single shank
11,800 lb. (5353 kg) multi-shank (3)
Pin puller for single-shank ripper . . . . . . . . . 106 lb. (48 kg)
Striker bars
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . 432 lb. (196 kg)
Rear
For counterweight . . . . . . . . . . . . . . . 105 lb. (48 kg)
For ripper . . . . . . . . . . . . . . . . . . . . . 161 lb. (73 kg)
Push beam wear plates . . . . . . . . . . . . . . . . 205 lb. (93 kg)
Wiggins fast-fuel system . . . . . . . . . . . . . . . 15 lb. (7 kg)
Radiator sand shield . . . . . . . . . . . . . . . . . . . 77 lb. (35 kg)
Air-suspension seat . . . . . . . . . . . . . . . . . . . 35 lb. (16 kg)
✶Cannot be used with other rear attachments.
140
130
600
60
1050C
DRAWBAR PULL X 1000 lb. (N)
120
CRAWLER SPEED
VS
GROUND PULL
110 500
460
100
50
Usable pull will depend
on traction and weight of tractor.
90 400
40
80
70 300
60
50
30
200
20
20 100
10
40
30
10
lb.
km/h
N
0
mph
0
2
1
4
2
3
10
8
6
4
SPEED
5
6
12
7
kg
8
1050C WASTE HANDLER
Key:
● Standard equipment ▲ Optional or special equipment
1050C Engine
● 324-hp (242 kW) Liebherr D 9406 TI-E A3
direct-injection, intercooled, turbocharged
V6-cylinder diesel; meets EPA and CARB
emission non-road regulations
● Automatic reversing fans for engine and
hydraulic cooling systems with timer and
manual override
● Blower-type cooling fan with hydrostatic
drive
● Deep engine oil pan allows up to 45-degree
operation
● Dual-element dry-type aspirated air cleaner
with automatic dust ejector
● Electric fuel pump
● Enclosed secondary fan guard (conforms
to SAE J1308)
● Engine coolant to –34°F (–37°C)
● Fuel system with prefilter, water separator,
and microfilters
● Heavy-duty five-fin-per-in. radiator
● Hydraulic engine retarder
● Intake air heater cold-starting aid
● Under-hood muffler with vertical exhaust
stack
● Oil-to-water engine oil cooler
● Spin-on full-flow oil filter, with anti-drainback valve
● Starter motor, 8.85 hp (6.6 kW)
● Turbocharger provides spark arresting
▲ Engine coolant heater, 1,000 watt, 120 volt
▲ Radiator sand screen
Power Train
● Dual-path hydrostatic transmission: Dynamic
●
●
●
●
●
braking / Electronically controlled with
power management and AutoTrac / Infinite
speed control / Inline F-N-R direction control / Single-lever steer with full power
turn and counterrotation
Automatic spring-applied, hydraulic released
parking brake
Hydraulic/transmission oil-to-air cooler,
independent of radiator with hydrostatically driven cooling fan
Park brake button: Neutralizes transmission
and activates parking brake
Three-speed transmission maximum speed
control with dash-mounted indicator light
Transmission system diagnostic test ports
Electrical
●
●
●
●
●
24-volt system
Power port, 12 volt, 10 amp
Power port, 24 volt, 5 amp
Alternator, 80 amp
Batteries (2), heavy-duty cold start,
1,000 CCA
● Positive battery terminal covers
● Electrically activated battery master
disconnect
1050C Electrical (continued)
● Breaker protected circuits
● Working lights, cab mounted, front (4) and
rear (2)
pitch
1050C Operator’s Station (continued)
● Deluxe mechanical-suspension seat
▲ Deluxe power-adjustable air-suspension seat
● Seat belt, 2-in. (50 mm), retractable
(conforms to SAE J386)
▲ Seat belt, 3-in. (76 mm), retractable with
CRS (conforms to SAE J386)✶
● Electronic monitor system with visual
warnings: Engine air filter restriction /
Final drive seal integrity / Hydraulic/
hydrostatic filter restriction / Hydrostatic
transmission pressure / Low alternator
voltage / Park brake
● Gauges, electric, illuminated: Engine coolant
temperature / Engine oil pressure / Fuel /
Hourmeter
● Horn, electric
● Key start switch
● Lever-controlled throttle with manual shutoff
▲ Radio AM/FM✶
frame
Center track guides
Front idler and sprocket chain guides
Hydraulic track adjusters with dirt cover
Oscillating track frames
Integral track frame covers
Isolation-mounted pivot shafts and equalizer bar
Maintenance-free track components, sealed
and lubricated rollers, idlers, and sprockets
Sealed and lubricated track chain
24-in. (610 mm) extreme-service singlebar grouser shoes with relief holes
26-in. (660 mm) extreme-service singlebar grouser shoes with relief holes
28-in. (711 mm) extreme-service singlebar grouser shoes with relief holes
Full-length bolt-on rock guards
bottom guard / Heavy-duty reinforced
sealed hinged bottom guards / Cab waste
barrier / Sealed engine side doors / Engine
door protection bars / Perforated engine
firewall and rear frame access panel /
Additional lights (4): Cylinder mounted
(2) and rear cab (2) / Turbocharger heat
shield / Recessed sprocket segments /
Hydraulic oil temperature gauge / Open
bottom fan guard for easy cleanout / Trunnion guard for tilt-cylinder hoses
▲ Striker bars: Front or rear / Semi-U or U
blade with trash racks / Push arm wear
plates / Rotary dual-stage engine air
precleaner / Wiggins fast-fuel system /
High-capacity cab air filtration / Rear
counterweight with retrieval hitch / Rear
counterweight with retrieval hitch and
storage compartment
Hydraulic System
● 89-gpm (336 L/min.) load-sensing variabledisplacement pump
● Blade quick-drop valve
● Circuit relief valve protection
● Hydraulic functions disabled with park
lock lever
● Hydraulic/hydrostatic oil reservoir with
sight glass
● Hydraulic system diagnostic test port
● Replaceable filter, 20/5 micron with
magnetic particle attractors
● Tank shutoff valves for service
● Two-function single-lever dozer-control valve
▲ Hydraulic controls for dual tilt and power
▲ Hydraulic controls for rear attachments
Undercarriage
● 86-in. (2180 mm) gauge standard track
●
●
●
●
●
●
●
●
▲
▲
▲
▲
Operator’s Station
● Modular cab with integrated ROPS/FOPS
(conforms to SAE J1040, ISO 3471/3449):
Hydraulically tiltable rearward 40 degrees /
Isolation mounted / Air conditioner/heater/
defroster/pressurizer with filtered fresh air
intake and three-speed blower / Ashtray /
Dome light / Lockable left and right doors
(open and closed position) / Radio-installation provision / Rearview mirror / Rubber
floormat / Sliding left-hand window / Tinted
glass / Windshield wipers, front and rear,
with washers
● Storage compartment with operator’s
manual
● 15-degree angle seat with tiltable fabric
cushions, adjustable fore-aft, height/weight,
backrest, and armrests
Net engine power is with standard equipment including air
cleaner, exhaust system, alternator, and cooling fan, at standard conditions per SAE J1349 and DIN 6270B, using No. 2-D
fuel at 35 API gravity. No derating is required up to 10,000-ft.
(3050 m) altitude.
DKA1050CWH Litho in U.S.A. (06-01)
✶See your John Deere dealer for further information.
Landfill Package
● Final drive seal guards / Heavy-duty fender
Other Attachments
▲
▲
▲
▲
▲
▲
▲
Heavy-duty cutting edges✶
Hydraulic pitch control with two tilt cylinders
Push plates, blade liners, and end bits✶
Single-shank parallelogram ripper
Multi-shank (3) parallelogram ripper
Hydraulic pin puller for single-shank ripper
Rigid heavy-duty drawbar
Overall Vehicle
●
●
●
●
●
Hinged reinforced radiator guard
Lifting lugs
Lockable vandal protection
Rear retrieval hitch
Reverse warning alarm (conforms to SAE
J994, J1446)
● Brake-release towing kit
Specifications and design subject to change without notice. Wherever applicable, specifications are in accordance with SAE standards. Except where otherwise noted, these specifications are based on a unit with standard equipment, modular ROPS/FOPS cab
with air conditioning, 165-in. (4191 mm) semi-U blade with standard cutting edges, landfill package, full fuel tank, and 175-lb.
(79 kg) operator.