John Deere 700H LT User's Manual

SPECIFICATIONS
DOZER
700H
Engine
CONSTRUCTION
EQUIPMENT
DIVISION
700H LT / 700H XLT / 700H LGP
Type...................................................................................................John Deere POWERTECH® 6068T with turbocharger
Rated power ......................................................................................115 SAE net hp (86 kW) / 123 SAE gross hp (92 kW) @ 2,100 rpm
Cylinders, wet sleeve .........................................................................6
Displacement .....................................................................................414 cu. in. (6.8 L)
Fuel consumption, typical...................................................................2.4 to 4.8 gal./hr. (9.1 to 18.2 L/h)
Maximum net torque..........................................................................410 lb.-ft. (525 Nm) @ 1,300 rpm
Lubrication.........................................................................................pressure system with full-flow spin-on filter and oil-to-water cooler
Air cleaner .........................................................................................dual stage dry type with safety element, precleaner, and dash-mounted restriction indicator
Electrical system................................................................................24 volt with 55-amp alternator
Cooling fan.........................................................................................blower-type
Transmission
Dual-path, electronic-controlled, hydrostatic drive; load-sensing feature automatically adjusts ground speed and power to match changing load conditions; each track is
powered by a variable-displacement piston pump and motor combination; decelerator controls speed from 5.5 mph (8.9 km/h) to stop
Travel speeds (infinitely variable)
Forward and reverse....................................................................0 to 5.5 mph (0 to 8.9 km/h)
Reverse speed ratio control .........................................................80, 100, 115, and 130% of forward speed to maximum of 5.5 mph (8.9 km/h)
Final Drives
Heavy-duty triple-reduction final drives attach directly to the mainframe, isolated from the track frame and dozer frame loads
Steering
Single-lever steering, speed, and direction control, and counterrotation; full power turns and infinitely variable track speeds provide unlimited maneuverability and optimum
control; hydrostatic steering eliminates steering clutches and brakes
Brakes
Hydrostatic (dynamic) braking stops the machine whenever the direction-control lever is moved to neutral, whenever the decelerator is depressed to the end of travel, or
whenever the brake pedal is depressed
Automatic Park Brake
Exclusive safety feature engages wet, multiple-disc brakes whenever the engine stops, whenever the operator applies the brake pedal, or whenever the park lock lever is
placed in the start position; machine cannot be driven with brake applied, reducing wear out or need for adjustment
Hydraulic System
System...............................................................................................open center
Pressure, main relief ..........................................................................3,200 psi (22 064 kPa)
Pump .................................................................................................gear-type, fixed-displacement pump
Flow...................................................................................................25 gpm (95 L/min.) @ 2,100 rpm
Filter, return oil...................................................................................10 micron
Control ...............................................................................................T-bar three function
Cylinders............................................................................................heat-treated, chrome-plated, polished cylinder rods with hardened steel (replaceable bushings) pivot pins
Capacities (U.S.)
Fuel tank with lockable cap ...............................................................60 gal. (227 L)
Cooling system with coolant recovery tank ........................................5.6 gal. (21 L)
Engine oil including spin-on filter .......................................................20 qt. (19 L)
Transmission reservoir refill including spin-on filter............................17.2 gal. (65 L)
Final drive (each)................................................................................14 qt. (13 L)
Hydraulic reservoir refill including spin-on filter .................................13.5 gal. (51 L)
4000S John Deere Winch, if equipped................................................10 gal. (38 L)
All powertrain and hydraulic systems allow maximum 45-degree off-level operation.
16
Undercarriage
700H LT
700H XLT
700H LGP
John Deere Dura-Trax™ features large deep-heat-treated components; pins and bushings are sealed for life; rollers and idlers are permanently sealed and lubricated; fulllength track frame covers reduce material buildup and ease cleaning
Sprocket ............................................................................................segmented
segmented
segmented
Chain .................................................................................................sealed and lubricated
sealed and lubricated
sealed and lubricated
Track shoes, each side.......................................................................40
42
42
20-in. (510 mm) grouser width (closed center, single bar)
Ground contact area ....................................................................3,818 sq. in. (24 633 cm2)
4,111 sq. in. (26 520 cm2)
4,111 sq. in. (26 520 cm2)
Ground pressure ..........................................................................6.8 psi (47 kPa)
6.5 psi (45 kPa)
6.5 psi (45 kPa)
22-in. (560 mm) grouser width (closed center, single bar)
Ground contact area ....................................................................4,192 sq. in. (27 048 cm2)
4,514 sq. in. (29 120 cm2)
4,514 sq. in. (29 120 cm2)
Ground pressure ..........................................................................6.2 psi (44 kPa)
5.9 psi (42 kPa)
5.9 psi (42 kPa)
24-in. (610 mm) grouser width (closed center, single bar)
Ground contact area....................................................................................................................................................................................4,917 sq. in. (31 720 cm2)
Ground pressure .........................................................................................................................................................................................5.5 psi (39 kPa)
30-in. (760 mm) grouser width (closed center, single bar)
Ground contact area....................................................................................................................................................................................6,120 sq. in. (39 486 cm2)
Ground pressure .........................................................................................................................................................................................4.6 psi (32 kPa)
30-in. (760 mm) swamp shoes
Ground contact area....................................................................................................................................................................................6,120 sq. in. (39 486 cm2)
Ground pressure .........................................................................................................................................................................................4.6 psi (32 kPa)
Ground clearance, minimum
With single-bar grouser (excluding grouser height) ......................15 in. (381 mm)
15 in. (381 mm)
15 in. (381 mm)
With swamp shoe (including grouser height)...............................................................................................................................................17.6 in. (447 mm)
Length of track on ground..................................................................95 in. (2415 mm)
102 in. (2600 mm)
102 in. (2600 mm)
Track gauge, standard........................................................................70 in. (1778 mm)
70 in. (1778 mm)
78 in. (1981 mm)
Oscillation (at front idler)....................................................................7 in. (178 mm)
7.7 in. (196 mm)
7.7 in. (196 mm)
Track rollers, each side ......................................................................6
7
7
Carrier rollers, each side ....................................................................1
1
Track pitch .........................................................................................6.91 in. (175.5 mm)
6.91 in. (175.5 mm)
6.91 in. (175.5 mm)
Optional or Special Equipment
Add (+) or deduct (–) lb. (kg) as indicated to base weight for units with
20-in. (510 mm) track shoes .......................................................included in base
22-in. (560 mm) track shoes .......................................................222 lb. (101 kg)
24-in. (610 mm) track shoes .......................................................N/A
30-in. (760 mm) track shoes .......................................................N/A
30-in. (760 mm) swamp shoes ....................................................N/A
132-in. (3353 mm) blade for LT ...................................................140 lb. (63 kg)
All-hydraulic heavy-duty C frame (less blade) ..............................– 1,730 lb. (– 784 kg)
Cab with heater ...........................................................................600 lb. (272 kg)
Cab with air conditioning .............................................................635 lb. (288 kg)
Canopy heater .............................................................................26 lb. (12 kg)
Counterweight, front ....................................................................380 lb. (172 kg)
Deluxe seat group........................................................................20 lb. (9 kg)
Front tow hook.............................................................................17 lb. (8 kg)
Fuel-fired coolant heater..............................................................12 lb. (5 kg)
Grille, extreme service with heavy-duty hose guard .....................112 lb. (51 kg)
Limb risers, arched ......................................................................341 lb. (155 kg)
Rear screen, canopy ....................................................................45 lb. (20 kg)
Rear screen, cab..........................................................................91 lb. (41 kg)
Side screens (cab or canopy) .......................................................108 lb. (49 kg)
Screens, front and doors (canopy)................................................120 lb. (54 kg)
Screens, front and doors (cab) .....................................................151 lb. (68 kg)
Extreme-service rear tank guard..................................................225 lb. (102 kg)
Extreme-service air-conditioning module guard ...........................117 lb. (53 kg)
Lights, driving ..............................................................................3 lb. (1 kg)
Work lights, high intensity............................................................9 lb. (4 kg)
Parallelogram ripper with three teeth ...........................................2,400 lb. (1088 kg)
Retrieval hitch..............................................................................68 lb. (31 kg)
Extended drawbar........................................................................195 lb. (88 kg)
Rock guards (4) ...........................................................................287 lb. (130 kg)
4000S John Deere Winch.............................................................1,437 lb. (652 kg)
Fairlead, four roller (for 4000S Winch)..........................................187 lb. (85 kg)
Log arch (for 4000S Winch) .........................................................780 lb. (354 kg)
– 233 lb. (– 106 kg)
included in base
N/A
N/A
N/A
140 lb. (63 kg)
– 1,730 lb. (– 784 kg)
600 lb. (272 kg)
635 lb. (288 kg)
26 lb. (12 kg)
380 lb. (172 kg)
20 lb. (9 kg)
17 lb. (8 kg)
12 lb. (5 kg)
112 lb. (51 kg)
341 lb. (155 kg)
45 lb. (20 kg)
91 lb. (41 kg)
108 lb. (49 kg)
120 lb. (54 kg)
151 lb. (68 kg)
225 lb. (102 kg)
117 lb. (53 kg)
3 lb. (1 kg)
9 lb. (4 kg)
2,400 lb. (1088 kg)
68 lb. (31 kg)
195 lb. (88 kg)
287 lb. (130 kg)
1,437 lb. (652 kg)
187 lb. (85 kg)
780 lb. (354 kg)
– 1,375 lb. (– 624 kg)
– 1,100 lb. (– 499 kg)
– 681 lb. (– 309 kg)
included in base
– 31 lb. (– 14 kg)
included in base
– 1,870 lb. (– 848 kg)
600 lb. (272 kg)
635 lb. (288 kg)
26 lb. (12 kg)
380 lb. (172 kg)
20 lb. (9 kg)
17 lb. (8 kg)
12 lb. (5 kg)
112 lb. (51 kg)
341 lb. (155 kg)
45 lb. (20 kg)
91 lb. (41 kg)
108 lb. (49 kg)
120 lb. (54 kg)
151 lb. (68 kg)
225 lb. (102 kg)
117 lb. (53 kg)
3 lb. (1 kg)
9 lb. (4 kg)
2,400 lb. (1088 kg)
68 lb. (31 kg)
195 lb. (88 kg)
N/A
1,437 lb. (652 kg)
187 lb. (85 kg)
780 lb. (354 kg)
17
SAE Operating Weights
700H LT
700H XLT
700H LGP
With standard equipment, rollover protective (ROPS)
canopy, full fuel tank, and 175-lb. (79 kg) operator
With 120-in. (3048 mm) blade and 20-in. (510 mm)
track shoes............................................................................25,800 lb. (11 703 kg)
With 120-in. (3048 mm) blade and 22-in. (560 mm)
track shoes ...................................................................................................................................26,790 lb. (12 152 kg)
With 132-in. (3353 mm) blade and 30-in. (760 mm)
track shoes...........................................................................................................................................................................................27,900 lb. (12 653 kg)
Dimensions
700H LT
700H XLT
700H LGP
118 in. (2985 mm)
118 in. (2985 mm)
Rounded to the nearest whole number.
A Overall height with canopy or cab..........................................118 in. (2985 mm)
B Overall length with canopy.....................................................178 in. (4509 mm)
185 in. (4693 mm)
185 in. (4693 mm)
Overall length with cab ..........................................................180 in. (4580 mm)
188 in. (4765 mm)
188 in. (4765 mm)
C Overall length with retrieval hitch ..........................................179 in. (4552 mm)
186 in. (4736 mm)
186 in. (4736 mm)
Overall length with extended drawbar....................................193 in. (4905 mm)
200 in. (5089 mm)
200 in. (5089 mm)
15 in. (381 mm)
15 in. (381 mm)
D Ground clearance, minimum
With single-bar grouser (excludes grouser
height).......................................................................15 in. (381 mm)
With swamp shoes (includes shoe height) ......................................................................................................................................17.6 in. (447 mm)
E Blade lift height .....................................................................36 in. (909 mm)
F Blade digging depth...............................................................20 in. (500 mm)
G Blade cutting edge angle, variable adjustment range..................7 degrees
H-Series Blade Specs
700H LT
H Width.........................................................................................120 in. (3048 mm)
SAE capacity ..............................................................................3.44 cu. yd. (2.63 m3)
I Height (at ends)..........................................................................39 in. (998 mm)
J
K
L
M
39 in. (980 mm)
39 in. (980 mm)
21 in. (541 mm)
21 in. (541 mm)
7 degrees
7 degrees
700H XLT
700H LGP
120 in. (3048 mm)
132 in. (3353 mm)
3.44 cu. yd. (2.63 m3)
3.75 cu. yd. (2.87 m3)
39 in. (998 mm)
39 in. (998 mm)
Top of spill sheet (center section) ...............................................45 in. (1140 mm)
45 in. (1140 mm)
45 in. (1140 mm)
Blade angle, right and left ..........................................................25 degrees
25 degrees
25 degrees
Angled width ..............................................................................109 in. (2769 mm)
109 in. (2769 mm)
121 in. (3073 mm)
Tilt..............................................................................................17 in. (424 mm)
17 in. (424 mm)
18 in. (467 mm)
Cut reach
With 20-in. (510 mm) shoes.......................................................2 in. (51 mm)
With 22-in. (560 mm) shoes ..............................................................................................................1 in. (25 mm)
With 30-in. (760 mm) shoes ......................................................................................................................................................................– 1 in. (– 25 mm)
N Width over track.........................................................................90 in. (2286 mm)
O Cast reach
92 in. (2338 mm)
108 in. (2743 mm)
With 20-in. (510 mm) shoes.......................................................16 in. (401 mm)
With 22-in. (560 mm) shoes ..............................................................................................................15 in. (375 mm)
With 30-in. (760 mm) shoes ......................................................................................................................................................................13 in. (330 mm)
18
A
D
I
Ground Line
E
G
F
L
H
Concrete Level
B
2.0 in. (51 mm)
single grouser height
C
M
Cut Reach
J
R
Width Over Track
N
K
O
Cast Reach
Q
P
Forestry Application
700H LT
700H XLT
700H LGP
Available limb risers and screens for the rollover protective cab and canopy structures; John Deere-built, self-contained 4000S Winch* for versatile skidding and clearing
200
operations
45
P Overall length with 4000S Winch .....................208 in. (5283 mm) 215.3 in. (5467 mm) 215.3 in. (5467 mm)
Q Additional length with 4000S Winch to (B) .......30.5 in. (775 mm) 30.5 in. (775 mm) 30.5 in. (775 mm)
Additional length with 4000S fairlead to (P) .....10 in. (254 mm)
10 in. (254 mm)
R Overall height with limb risers..........................122 in. (3099 mm) 122 in. (3099 mm)
700H
180
40
10 in. (254 mm)
LT, XLT, AND LGP
160
122 in. (3099 mm)
35
*See 4000S Winch specifications sheet.
140
30
25
100
20
80
15
60
40
5
20
N
10
lb.
Drawbar pull versus ground speed...........................usable pull will depend on traction and weight of tractor
DRAWBAR PULL x 1000 lb. (N)
120
Drawbar Pull
0
km/h 0
mph 0
1
2
1
3
2
4
5
3
6
7
4
8
5
9
6
SPEED
19
700H Dozer
● Standard equipment ▲ Optional or special equipment
Key:
LT XLT LGP
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●●●
▲▲▲
●●●
●●●
●●●
●●●
●●●
●●●
▲▲▲
▲▲▲
▲▲▲
▲▲▲
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●●●
●●●
▲▲▲
Engine
115-hp (86 kW) turbocharged, isolation mounted
Oil-to-water engine oil cooler
Vertical spin-on oil filter
Vertical spin-on fuel filters with water separator
Dual-element dry air cleaner with built-in precleaner and evacuator valve
Above-hood pre-screener/raincap
External primary precleaner✶
Enclosed safety fan guard (conforms to SAE J1308)
Coolant recovery tank
Blower-type cooling fan
Trash-resistant seven-fin in-line radiator
Under-hood muffler with vertical exhaust stack
Pre-wired for ether start aid
Electric ether start aid
Radiator sand screen (steel)
Engine coolant heater, 1,000 watts, 110 volts
Engine coolant heater, fuel fired
Powertrain and Controls
Dual-path hydrostatic transmission
Single-lever steering, speed, and direction control
Decelerator pedal with automatic retardation
Engine-speed selection lever
Automatic tracking control
Dynamic braking (anti-free wheel)
Counterrotation
Transmission neutral lock with safety start switch
Spring-applied, hydraulic-released parking brake
Independent transmission oil reservoir with
sight gauge
Onboard diagnostics with visual code display
Oil-to-air transmission oil cooler
Built-in final drive seal guards
Triple-reduction final drives with wet multi-disc
brakes
Max. forward/reverse speed 5.5 mph (8.9 km/h)
Selectable reverse speed ratio setting of 80, 100,
115, or 130% of forward speed
Remote diagnostic test ports
C-Frames and Blades
● ● ● Six-way all-hydraulic heavy-duty C-frame with
●
●
●
●
●●
●●
●●
●
●
▲▲
●●●
●●●
●●●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●●●
infinitely adjustable blade pitch
Remote C-frame pivot grease banks
Cordura-covered hoses with replaceable lengths
Straight end bits
Blade, 120-in. (3048 mm), with heavy-duty C-frame
Blade, 132-in. (3353 mm), with heavy-duty C-frame
Blade, 132-in. (3353 mm), with heavy-duty
C-frame✶
Electrical (24-volt system)
Fuse panel with blade-style multi-fused circuit
breakers
Horn, electric (conforms to SAE J994, J1446)
Reverse warning alarm (conforms to SAE J994,
J1446)
Fuel gauge, electric, illuminated
Hourmeter, electric
Transmission oil pressure gauge, illuminated
Master electrical disconnect
Positive battery terminal covers with battery cover
By-pass start safety cover at starter
Electronic monitor with visual and audible
warning: Alternator / Hydraulic filter restriction / Transmission filter restriction / Transmission oil temperature / Coolant temperature
(audible) / Engine coolant temperature gauge /
Engine oil pressure (audible) / Engine oil pressure gauge / Air cleaner restriction / Fasten seat
belt / Park brake
Ground-speed selection display
LT XLT LGP Electrical (24-volt system) (continued)
● ● ● Dual 12-volt low-maintenance batteries, 190-min.
●●●
▲▲▲
reserve capacity, 950 CCA
55-amp sealed alternator with cab or canopy
Power port, 12 volt, 20 amps, for phone and radio
LT XLT LGP
▲▲▲
Hydraulic System
● ● ● 25-gpm fixed-displacement hydraulic gear pump
▲ ▲ ▲ Pump with through-drive for winch or auxiliary
●●●
●●●
●●●
●●●
●●●
▲▲▲
▲▲▲
Undercarriage
●
●
●
●
●
●
●
●
pump
Low-effort T-bar blade control
Independent hydraulic reservoir with sight gauge
Vertical spin-on hydraulic filter
O-ring face seal hydraulic connectors
Three-function hydraulic valve
Four- and five-function valves with levers, without float
Rear auxiliary plumbing
●
●
●
●
●
●
●
●
●
●
●●●
▲▲▲
▲▲▲
●●●
●▲▲
▲●▲
▲
●
▲
▲▲▲
▲▲▲
70-in. (1778 mm) track gauge, 95-in. (2413 mm)
track on ground
70-in. (1778 mm) track gauge, 102-in. (2591 mm)
track on ground
78-in. (1981 mm) track gauge, 102-in. (2591 mm)
track on ground
Double-flange rollers
Oscillating track frame with pinned front crossbar
Full-length smooth-surface track-frame covers
Chain guides, front and rear (bolt-on)
Fully protected track-tension adjusters (grease
adjustable)
Segmented sprockets
Sprocket rock guards (bolt-on)
Bolt-on full-length track-roller rock guards
Sealed and lubricated track chains
20-in. (510 mm) extreme-service, single-bar
grousers
22-in. (560 mm) extreme-service, single-bar
grousers
24-in. (610 mm) extreme-service, single-bar
grousers
30-in. (760 mm) extreme-service, single-bar
grousers
Swamp shoes, 30-in. (760 mm), self-cleaning
pyramid
Lights (optional)
Grille-mounted high-intensity lights (2), with
rear light (1), halogen, 50 watts each
High-intensity work lights, front (2) and rear (2),
with steel guards, 50 watts each
Operator’s Station
● ● ● Modular ROPS/FOPS canopy, isolation mounted
(conforms to SAE J1040)
▲ ▲ ▲ Under-seat canopy heater, 30,000 Btu/hr.
▲ ▲ ▲ Modular ROPS/FOPS cab, isolation mounted
▲▲▲
●●●
●●●
●●●
●●●
●●●
●●●
●●●
(conforms to SAE J1040): Fresh air intake cab
heater/defroster/pressurizer, 18,000 Btu/hr. with
air precleaner / Dome light / Deluxe headliner
with molded air ducts for heater, defroster, and
air conditioner / 30,000-Btu/hr. under-seat heater /
Front windshield and doors, wipers and washers /
Tinted safety glass
Air conditioning, 24,000 Btu/hr.
Right and left operator station entry
Slip-resistant front-mounting steps
Ergonomically located handholds
Headliner and floormat
Adjustable footrests and full-length armrests
Built-in Operator’s Manual storage
Suspension vinyl seat (conforms to SAE J899): Fore
and aft/weight and height combined adjustment /
Net engine power is with standard equipment including air cleaner, exhaust
system, alternator, and cooling fan, at standard conditions per SAE J1349
and DIN 6270B, using No. 2-D fuel at 35 API gravity. No derating is required
up to 10,000-ft. (3050 m) altitude. Gross power is without cooling fan.
DKA700H Litho in U.S.A. (02-03)
✶ See your John Deere dealer for further information.
▲▲▲
▲▲▲
●●●
▲▲▲
▲▲▲
▲▲▲
▲▲▲
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●●●
●●●
▲▲▲
▲▲▲
▲▲▲
▲▲▲
▲▲▲
▲▲▲
▲▲▲
▲▲▲
▲▲▲
▲▲▲
▲▲▲
▲▲▲
▲▲▲
▲▲▲
▲▲▲
▲▲▲
▲▲▲
▲▲▲
▲▲▲
▲▲▲
▲▲▲
▲▲▲
▲▲▲
Operator’s Station (continued)
Adjustable leg support / Seat belt, 2 in. (51 mm),
retractable with CRS (conforms to SAE J386)
Deluxe comfort control mechanical suspension
seat, vinyl or cloth (conforms to SAE J899): Fore
and aft/weight and height combined adjustment /
Adjustable leg support / Adjustable backrest
angle / Adjustable lumbar support / Adjustable
seatback extension / Seat belt, 3 in. (76 mm),
retractable with CRS (conforms to SAE J386)
Deluxe comfort control air suspension seat,
vinyl or cloth (conforms to SAE J899): Fore and
aft/weight and height combined adjustment /
Adjustable leg support / Adjustable backrest
angle / Adjustable lumbar support / Adjustable
seatback extension / Seat belt, 3 in. (76 mm),
retractable with CRS (conforms to SAE J386)
Seat belt, 3 in. (76 mm), retractable with CRS
(conforms to SAE J386)
Convex interior rearview mirror
Rear attachment mirror (for cab only)
Accessories: Convex wide-angle interior rearview
mirror / Leg cushions (2) / Seat-side lockable
storage box/lunch box/cup holder
Rear window wiper and washer for cab
Radio, AM/FM weatherband with digital clock
and antenna
Overall Vehicle
One-piece unitized construction mainframe
Front tow loop (bolt-on)
Reinforced engine and mid-frame bottom guards
Integral transmission guard
Heavy-duty louvered grille
Perforated engine side shields
Vandal protection lock provisions for: Engine
service access cover / Fuel fill / Hydraulic reservoir fill/check / Transmission reservoir fill/check /
Instrument panel
Solid hood (painted gray for reduced glare)
Lockable grease gun/tool storage compartment
in right access door
Environmental drains
Chrome exhaust stack
Manuals/trademarks/decals, French or Spanish
Transport lift and tie-down rings✶
Protection Packages
Extreme-duty louvered grille and hose protection
Limb risers, arched or point-to-point (bolt-on)
Operator-protective rear screen (canopy or cab)
Operator-protective side screens (canopy or cab)
Operator-protective full-screen package (canopy
or cab)
Heavy-duty engine air-intake guard
Extreme-service rear tank guard
Air-conditioning module guard
Lift cylinder guards
Attachments
Counterweight, front, 380 lb. (172 kg)
Counterweight, rear✶
Retrieval hitch with pin
Extended rigid drawbar with pin for pull-type
implements
Drawbar, extended for winch (with or without
Fairlead)
Ripper, parallelogram with five shank pockets
and three teeth
Winch, John Deere 4000S, power in/free spool
out OR power out
Four-roller fairlead for winch
Root-rake blade attachment
Rear-mounted toolbox
Specifications and design subject to change without notice. Wherever applicable, specifications
are in accordance with SAE standards. Except where otherwise noted, specifications are based
on units with standard equipment, rollover protective structures, full fuel tanks, and 175-lb.
(79 kg) operators; 700H LT unit with 120-in. (3048 mm) blade and 20-in. (510 mm) track
shoes; 700H XLT unit with 120-in. (3048 mm) blade and 22-in. (560 mm) track shoes; and
700H LGP unit with 132-in. (3353 mm) blade and 30-in. (760 mm) track shoes.