CS-GW1200
12” Dual Voice Coil Subwoofer Unit
Subwoofers
1200W
Max.
350W
RMS
Butyl Rubber
Surroound
Dual Voice
Coil
Key Benefits
A high-performing subwoofer with clear-cut sound. The full use of rubber reduces unwanted vibrations for
distortion-free bass.
✹Double Structure Diaphragm
The double structure reinforces
the diaphragm and reduces
distortion during high amplitude
for clear and deep bass.
✹Butyl Rubber Surround
The butyl rubber surround absorbs the minute
diaphragm vibrations. Its high tolerance to
large amplitudes enables bass reproduction
with little distortion.
✹Dual Input Voice Coil
The unit has 4-ohm dual voice coils, enabling high power input.
✹Spider with Woven Wire
The wire is laced into the spider to prevent
abnormal vibrations and touching against the
diaphragm. This also helps avoid disconnection
during high-signal input.
CS-GW1200
12” Dual Voice Coil Subwoofer Unit
✹Rigid Structure
The full-covering cap prevents the woofer from deforming and increases its strength, to provide clear, distortion-free bass.
FULL COVER CAP (CS-GW1200)
✹Large Magnets and Voice Coil
The CS-GW1200 has 5-11/16 inch, 53.7 oz magnet and 2-inch aluminum voice coil,
enabling 350W rated input. You can play steady, deep bass with a high-output
amplifier.
NORMAL CAP
Recommended System
CS-ARS650
CS-ARS650
KD-AVX77
Front
✹Rubber Magnet Cover
The flexible material ensures safe installation,
and absorbs vibrations for a clear low frequency
reproduction.
KS-AR8004D
CS-AR680
Rear
CS-AR680
KS-AR9501D
CS-GW1200
Key Specifications
CS-GW1200
Type
Max. Power
RMS Power
Sensitivity
Frequency Response
Impedance
Fs
Qts
Vas
Magnet Mass
Hole Cutout Diameter
Mounting Depth
11 13/16” (30 cm)
1200W
350W
87dB
23 - 2,000Hz
4Ω + 4Ω (Dual Input)
25.4Hz
0.315
3.42 ft3
53.7 oz
Dia. 11” (278 mm)
5 1/2” (139.6 mm)
Dia. 10-29/32 inch [276.5mm]
5-17/32 inch [139.6 mm] 13/16 inch [19.7 mm]
m]
2m
]
[30
S
h
h
E
mm
nc L inc
28
4i O
1/ ] H /32 ch [3
a. mm -29
n
i
i
6
1
D
8- [6.3 ia. 1 15/1
D 12.
Dia
NTK-0673-17