WATCH A RECORDED PROGRAM

* You can use the available buttons on the remote control or on the VCR.

1 Load a cassette with the label facing out and the window facing up.

2 Press REW or FF (remote) to find program start point.

3 Press PLAY to start playback.

4 Press STOP (remote) or STOP/EJECT (VCR), then press STOP/EJECT to remove the cassette.

5

RECORD A PROGRAM

a–BASIC RECORDING

* You can use the available buttons on the remote control or on the VCR.

1 Load a cassette as above.

2 Press CH, or press the appropriate NUMBER keys (remote) and press ENTER (remote), to select the recording channel.

3 Press SP/EP (remote) to set the recording speed.

4 Press REC and PLAY together (remote) or REC (VCR) to start recording.

5 Press PAUSE to stop recording temporarily, and press PLAY to resume.

6 Press STOP or STOP/EJECT, then press STOP/EJECT to remove the cassette.

b–INSTANT TIMER RECORDING

* You cannot perform ITR using the remote control.

1 Press REC to start recording.

2 Press REC to engage ITR. “0:30” appears in the VCR display.

3 To extend duration in increments of 30 minutes, press REC as many times as necessary.

SP P

VCR

HR-VP672U

POWER

POWER

VIDEO (MONO)L—AUDIO—R

MENU

OK

HR-VP472U

POWER

POWER

PLAY

SP EP

VCR

CH

䊱䊲

REW

PLAY

FF

CH

REC

REC STOP/EJECT PAUSE

PAUSE

STOP/EJECT

PLAY

ENTER

TV/VCR

PLAY

REW (Rewind)

REC

STOP

SP

VCR

CH

䊱䊲

TV

CABLE/

DBS

MBR SET

A/B

POWER

TV/VCR ENTER/OSD DISPLAY

1

4

7

C. RESET

CANCEL

2

5

DAILY(M-F)

8

AUX

0

3

6

WEEKLY

9

2

TIMER 4

START STOP DATE CH

1 PROG

REW

EXPRESS PROGRAMMING

PROG

CHECK

SP/EP SKIP SEARCH

PLAY

FF

STOP

REC

PAUSE

MENU

TV CH +

3 OK

T

V

V

O

L

–

SHUTTLE

PLUS

TV CH –

TV

V

O

L

+

MULTI BRAND

REMOTE CONTROL UNIT

REC

PAUSE

STOP/EJECT

POWER

NUMBER

CH

+/–

SP/EP

FF (Fast-Forward)

PAUSE

Dear Customer,

Thank you for purchasing this JVC Video Cassette

Recorder.

QUICK ST

AR

T*

MONO/Hi-Fi/SUPER VHS

VIDEO CASSETTE RECORDERS

* Please refer to the HR-VP672U/472U’s instruction manual for more detailed information.

A GUIDE TO EASY SET UP AND USE

The Path To Enjoyment

Starts Here . . .

1

CHECK

PACKAGE

CONTENTS

SITUATE AND

CONNECT

VCR

SET CLOCK

AND

TUNER

PLAY BACK

A

TAPE

RECORD

A

PROGRAM

MAKE SURE THAT YOUR PACKAGE

CONTAINS:

RF CABLE (F-TYPE) VIDEO CASSETTE

RECORDER

INFRARED

REMOTE

CONTROL

UNIT

1

4

7 8

0

2

5

3

6

2

9

4

1

“AA” BATTERY x 2

HR-VP672U

3

HR-VP472U

U

Printed in Malaysia

1298 IYV * MW * PJ

COPYRIGHT © 1999 VICTOR COMPANY OF JAPAN, LTD.

LPT0186-002A

SITUATE AND CONNECT YOUR

NEW VCR

a–BASIC ANTENNA/CABLE CONNECTION

1 Place the VCR on a stable, horizontal surface.

2 Disconnect your antenna or cable line from your TV.

3 Connect your antenna to your VCR.

4 Connect your VCR to your TV.

5 After completing the basic connections:

● If you’re using a Cable Box, . . .

. . . go to 2b (CATV CONVERTER

CONNECTION) .

● If you’re using an AV connection, . . .

. . . go to 2c (AUDIO/VIDEO

CONNECTIONS).

● If you’re using an RF connection, . . .

. . . go directly to 3 (PLUG & PLAY).

RF CONNECTION

COMBINED VHF/UHF

Back of VCR (example only)

ANT. IN

RF OUT

Back of TV (example only)

VHF/UHF

SEPARATE VHF/UHF

b–CATV CONVERTER CONNECTION

OUT IN

CATV Input

Cable

Box

To TV

TV

From

Cable

Box

ANT. IN

RF OUT

VCR

With this connection you can view/record any cable channel including scrambled channels to which you have subscribed.

To watch TV with this type of connection

1 Press TV/VCR on remote to engage VIDEO mode.

2 Tune TV to VCR output channel

(3, 4 or AV mode).

3 Tune VCR to Cable Box output channel.

4 Select desired channel on Cable Box.

•You can only view the channel you’re recording.

•You cannot change channels with the

VCR remote control.

TV

VCR

To TV

OUT

CATV Input

ANT. IN

RF OUT

From VCR

IN

Cable

Box

With this connection, you can view one scrambled cable channel while recording another unscrambled channel.

To watch TV with this type of connection

1 Press CH or NUMBER keys to select desired channel for recording.

2 Press TV/VCR to engage TV mode.

3 Tune TV to Cable Box output channel.

4 Select desired channel on Cable Box.

•You cannot record scrambled channels.

•To play back a tape, you must tune the Cable

Box to the VCR output channel.

VHF ONLY

UHF

VHF

UHF ONLY

CABLE TV LINE

VHF

UHF

Note:

Exact connector positions and names may differ.

● CONNECTORS WHICH ARE OR MAY BE REQUIRED:

䡲 RF Cable

䡲

300-75 ohm Matching

Transformer

䡲

VHF/UHF Antenna Mixer

䡲

Antenna Splitter

䡲

Antenna Splitter

c–AUDIO/VIDEO CONNECTIONS

AV connection methods differ from one type of VCR to another. First, for any TV and VCR type, connect your VCR to your TV using RF connection. Then make AV connections following one of the methods pictured to the right.

After making the connections, go to 3 (PLUG

& PLAY) .

MONAURAL VHS VCR 佡 AV TV

Hi-Fi VHS VCR

佡

AV STEREO TV

VIDEO OUT

L

AUDIO OUT

R

VIDEO OUT

AUDIO OUT

VIDEO IN

AUDIO IN

VIDEO IN

L

AUDIO IN

R

SUPER VHS VCR 佡 AV STEREO TV WITH S-VIDEO

INPUT TERMINALS

S-VIDEO OUT

VIDEO OUT

L

AUDIO OUT

R

S-VIDEO IN

VIDEO IN

L

AUDIO IN

R

TV

To Listen To VCR Sound Through A

Component Stereo Audio System,

Connect As Shown

VCR

VIDEO OUT

L

AUDIO OUT

R

Monaural deck owners:

Connect to VCR's AUDIO

OUT

AMP

SET YOUR VCR'S CLOCK AND

TUNER

PLUG & PLAY

The VCR's clock and tuner channels are set automatically when the VCR is plugged into the AC outlet.

(

If you use a cable box, Plug & Play will not function; set the clock and tuner channels manually.

墌 pg.11 – 15 of the HR-VP672U/472U’s instruction manual)

1 4

Plug the VCR into the

AC outlet.

2

During auto channel setting, the channel numbers are displayed as they are scanned and set. Receivable channels are automatically assigned to CH buttons, and non-receivable channels are skipped.

Don’t press any buttons on the VCR or remote during auto setup.

3

5

When setting is complete, the VCR displays the current time. You can now use your VCR.

“AUTO” blinks while the VCR automatically sets the clock using information provided by the local PBS channel.

NOTES:

5

(refer to page 12 or 13 of the HR-VP672U/472U’s instruction manual). Auto channel set has already taken place, and is not affected.

● There are some PBS channels that do not transmit clock setting data. If your antenna cable is properly connected and “– – : – –” is displayed, perform the Manual Clock Set procedure (refer to page 13 of the HR-VP672U/472U’s instruction manual). Auto channel setting has not yet taken place, so please also perform the “Set Receivable Channels” procedure (refer to page 14 of the HR-VP672U/472U’s instruction manual).