advertisement
Dear Customer,
Thank you for purchasing this JVC Video Cassette
Recorder.
QUICK ST
AR
T*
MONO/Hi-Fi/Mini DV/SUPER VHS
VIDEO CASSETTE RECORDERS
* Please refer to the HR-DVS1U’s instruction manual for more detailed information.
A GUIDE TO EASY SET UP AND USE
The Path To
Enjoyment
Starts Here.
SET CLOCK
AND
TUNER
CHECK
PACKAGE
CONTENTS
PLAY BACK
A
TAPE
SITUATE AND
CONNECT
VCR
RECORD
A
PROGRAM
POWER
EJECT
DV
PULL - OPEN
DV VHS
DUB
DV IN/OUT
MAKE SURE THAT YOUR PACKAGE
CONTAINS:
VIDEO CASSETTE
RECORDER
RF CABLE (F-TYPE) CONTROLLER INFRARED
REMOTE
CONTROL
UNIT
1
4
7
T
2
W
5
8
0
3
6
9
2
4
PLAY
STOP
INSERT
A.DUB
REW FF
REC PAUSE CH
EJECT
PAUSE
S-VIDEO
VIDEO ( M O N O ) L — A U D I O — R
VHS
PULL - OPEN
1 DV VHS
“AA” BATTERY x 2 POWER
CORD
ANTENNA
SPLITTER
AUDIO/VIDEO
CABLE
S-VIDEO
CABLE
3
U
Printed in Japan
0300 IYV * ID * VP
COPYRIGHT © 2000 VICTOR COMPANY OF JAPAN, LTD.
LPT0383-002A
SITUATE AND CONNECT YOUR
NEW VCR a–BASIC ANTENNA/CABLE CONNECTION
1 Place the VCR on a stable, horizontal surface.
2 Disconnect your antenna or cable line from your TV.
3 Connect your antenna to your VCR.
4 Connect your VCR to your TV.
5 After completing the antenna connection, go to 2b (AUDIO/VIDEO
CONNECTIONS).
ANTENNA CONNECTION
Back of VCR (example only)
COMBINED VHF/UHF
ANTENNA IN
Back of TV (example only)
VHF/UHF
SEPARATE VHF/UHF
VHF ONLY
Antenna
Splitter
UHF
VHF
UHF ONLY
CABLE TV LINE
VHF
UHF
Note:
Exact connector positions and names may differ.
● CONNECTORS WHICH ARE OR MAY BE REQUIRED: n
RF Cable n
300-75 ohm Matching
Transformer n
VHF/UHF Antenna Mixer n Antenna Splitter n Antenna Splitter n Antenna Splitter
b–AUDIO/VIDEO CONNECTIONS
AV connection methods differ from one type of VCR to another. First, for any TV and VCR type, connect your VCR to your TV using antenna cables. Then make AV connections following one of the methods pictured to the right.
After making the connections, go to 3 (PLUG
& PLAY) .
● If you’re using a Cable Box, go to 2c
(CATV CONVERTER CONNECTION).
MONAURAL VHS VCR g AV TV
For the component video connection, refer to page 7 of the
HR-DVS1U’s instruction manual.
Hi-Fi VHS VCR g AV STEREO TV
VIDEO OUT
L
AUDIO OUT
R
VIDEO IN
L
AUDIO IN
R
SUPER VHS VCR g AV STEREO TV WITH S-VIDEO
INPUT TERMINALS
VIDEO OUT
AUDIO OUT
VIDEO IN
AUDIO IN
S-VIDEO OUT
VIDEO OUT
L
AUDIO OUT
R
S-VIDEO IN
VIDEO IN
L
AUDIO IN
R
TV
To Listen To VCR Sound Through A
Component Stereo Audio System,
Connect As Shown
VCR
VIDEO OUT
L
AUDIO OUT
R
Monaural deck owners:
Connect to VCR's AUDIO
OUT
AMP
c–CATV CONVERTER CONNECTION
OUT IN
CATV Input
Cable
Box
To TV TV VCR
ANTENNA IN
CATV Input
From
Cable
Box
ANTENNA IN
VCR
With this connection you can view/record any cable channel including scrambled channels to which you have subscribed.
To watch TV with this type of connection
1 Tune TV to Cable Box output channel.
2 Tune VCR to Cable Box output channel.
3 Select desired channel on Cable Box.
• You can only view the channel you’re recording.
• You cannot change channels with the
VCR remote control.
TV
To TV
OUT IN
Cable
Box
With this connection, you can view one scrambled cable channel while recording another unscrambled channel.
To watch TV with this type of connection
1 Press CH or NUMBER keys to select desired channel for recording.
2 Tune TV to Cable Box output channel.
3 Select desired channel on Cable Box.
• You cannot record scrambled channels.
SET YOUR VCR'S CLOCK AND
TUNER
PLUG & PLAY
The VCR's clock and tuner channels are set automatically when the VCR is plugged into the AC outlet.
(
If you use a cable box, Plug & Play will not function; set the clock and tuner channels manually.
Z
pg.10 – 14 of the HR-DVS1U’s instruction manual)
1 4
Plug the VCR into the
AC outlet.
2
During auto channel setting, the channel numbers are displayed as they are scanned and set. Receivable channels are automatically assigned to CH buttons, and non-receivable channels are skipped.
Don’t press any buttons on the VCR or remote during auto setup.
5
3
When setting is complete, the VCR displays the current time. You can now use your VCR.
“AUTO” blinks while the VCR automatically sets the clock using information provided by the local PBS channel.
NOTES:
5
(refer to page 11 or 12 of the HR-DVS1U’s instruction manual). Auto channel set has already taken place, and is not affected.
● There are some PBS channels that do not transmit clock setting data. If your antenna cable is properly connected and “– – : – –” is displayed, perform the Manual Clock Set procedure (refer to page 12 of the HR-DVS1U’s instruction manual). Auto channel setting has not yet taken place, so please also perform the “Set Receivable Channels” procedure (refer to page 13 of the
HR-DVS1U’s instruction manual).
4
WATCH A RECORDED PROGRAM
* You can use the available buttons on the remote control or on the VCR.
1 Load a cassette with the label facing out and the window facing up.
2 Press VHS or DV to select the deck.
3 Press REW or FF to find program start point.
4 Press PLAY to start playback.
5 Press STOP, then press EJECT to remove the cassette.
5
RECORD A PROGRAM a–BASIC RECORDING
* You can use the available buttons on the remote control or on the VCR.
1 Load a cassette as above.
2 Press VHS or DV to select the deck.
3 Press CH, or press the appropriate NUMBER keys (remote) and press ENTER (remote), to select the recording channel.
4 Press SP/EP (remote) to set the recording speed.
5 Press REC and PLAY together (remote) or REC (VCR) to start recording.
6 Press PAUSE to stop recording temporarily, and press PLAY to resume.
7 Press STOP, then press EJECT to remove the cassette.
b–INSTANT TIMER RECORDING
* You cannot perform ITR using the remote control.
1 Press REC to start recording.
2 Press REC to engage ITR. “0:30” appears in the VCR display.
3 To extend duration in increments of 30 minutes, press REC as many times as necessary.
SP
VCR
POWER
POWER
EJECT
DV
DV VHS
DUB
DV IN/OUT
DV
PLAY STOP
PLAY
STOP
INSERT
A.DUB
REW FF
REC PAUSE
CH
EJECT REC PAUSE CH 5∞
EJECT
EJECT
PAUSE
S-VIDEO
VIDEO ( M O N O ) L — A U D I O — R
VHS
VHS
TV/VCR
NUMBER
PLAY
REW (Rewind)
REC
STOP
VCR TV CABLE/DBS A.MONITOR
POWER
A/B TV/VCR
PROG
CHECK DISPLAY
ENTER/OSD
1
FADE/WIPE
T
4
DBS
7
C. RESET
CANCEL
2
EFFECT
5
W
DAILY(M-F)
8
AUX
0
3
ON/OFF
6
WEEKLY
9
TIMER
2
4
START STOP DATE CH
1 PROG
EXPRESS PROGRAMMING
SP/LP
SP/EP
DV VHS
REW
PLAY
FF
REC
STOP
TV CH +
PAUSE
TV
VOL
—
MENU
3
TV CH —
OK
S T A R T I N / O U T
R .
JOG/
SHUTTLE
A .
E D I T
TV
VOL
+
POWER
ENTER
CH
+/–
SP/EP
FF (Fast-Forward)
PAUSE
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project