ENGLISH
FRANÇAIS ESPAÑOL
DVD/CD RECEIVER
RECEPTOR CON DVD/CD
RECEPTEUR DVD/CD
KD-AVX1
KD-AVX1
OK
DISP
D
SOURCE
MENU
T/P
BACK BAND
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
LVT1323-003B
[EU]
Cover_KD-AVX1[EU]_003B_f.indd 2
29/3/05 2:36:50 pm
ENGLISH
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to
obtain the best possible performance from the unit.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave
all servicing to qualified service personnel.
3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.
Avoid direct exposure to beam.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
How to reset your unit
How to forcibly eject a disc
If a disc cannot be recognized by the receiver
or cannot be ejected, ejects the disc as
follows.
This will reset the microcomputer. Your
preset adjustments will also be erased.
“NO EJECT?” (or “EJECT OK?”) and
“EMERGENCY EJECT?” appear on the
monitor.
Press 5 / ∞ repeatedly to select
“EMERGENCY EJECT?”, then press OK.
• If this does not work, reset your receiver.
• Be careful not to drop the disc when it
ejects.
2
AVX1EN_book.indb 2
05.2.23 11:47:57 PM
• DO NOT install any receiver in
locations where;
– it may obstruct the steering wheel and
gearshift lever operations, as this may
result in a traffic accident.
– it may obstruct the operation of safety
devices such as air bags, as this may
result in a fatal accident.
– it may obstruct visibility.
• DO NOT operate any receiver while
manipulating the steering wheel, as this
may result in a traffic accident.
• The driver must not watch the monitor
while driving.
If the driver watches the monitor while
driving, it may lead to carelessness and
cause an accident.
• The driver must not put on the
headphones while driving. It is
dangerous to shut off the outside sounds
while driving.
• If you need to operate the receiver while
driving, be sure to look ahead carefully
or you may be involved in a traffic
accident.
• If the parking brake is not engaged,
“ParkingBrake” flashes on the monitor,
and no playback picture will be shown.
– This warning appears only when
the parking brake wire is connected
to the parking brake system built
in the car (refer to the Installation/
Connection Manual).
This product incorporates copyright
protection technology that is protected
by U.S. patents and other intellectual
property rights. Use of this copyright
protection technology must be authorized
by Macrovision, and is intended for home
and other limited viewing uses only unless
otherwise authorized by Macrovision.
Reverse engineering or disassembly is
prohibited.
ENGLISH
WARNINGS:
Caution on volume setting:
Discs produce very little noise compared
with other sources. Lower the volume
before playing a disc to avoid damaging
the speakers by the sudden increase of the
output level.
Cautions on the monitor:
• The monitor built in this receiver has
been produced with high precision, but it
may have some ineffective dots. This is
inevitable and is not malfunction.
• Do not expose the monitor to direct
sunlight.
For safety....
Temperature inside the car....
• Do not raise the volume level too much, as
this will block outside sounds, making driving
dangerous.
• Stop the car before performing any
complicated operations.
If you have parked the car for a long time in
hot or cold weather, wait until the temperature
in the car becomes normal before operating the
unit.
3
AVX1EN_book.indb 3
05.2.23 11:48:00 PM
ENGLISH
How to read this manual
The following methods are used to make the
explanations simple and easy-to-understand:
• Some related tips and notes are explained in
“More about this receiver” (see pages
61 – 65).
• Button operations are mainly explained with
the illustrations as follows:
Characters shown on the monitor
In addition to the Roman alphabets (A – Z, a
–z), the following characters will be used to
show the various information on the monitor.
• You can also use the following characters to
assign titles (see page 48).
Accented letters
Upper case
Lower case
Press briefly.
Press repeatedly.
Press either one.
Numbers and symbols
Press and hold until
your desired response
begins.
A
B
Press A, then press
B.
Press and hold both
buttons at the same
time.
4
AVX1EN_book.indb 4
05.2.23 11:48:00 PM
How to reset your unit ...........................
How to forcibly eject a disc ...................
How to read this manual ........................
Characters shown on the monitor ..........
2
2
4
4
Monitor adjustments ...................... 34
Other disc operations ..................... 35
Introduction — Playable discs ............ 6
Basic operations ..................................... 35
Selecting the playback modes................ 37
List screen operations ............................ 39
Control panel ................................ 7
Dual Zone operations ..................... 40
Parts identification .................................
7
Remote controller — RM-RK230 ....... 8
Main elements and features ...................
8
Getting started .............................. 10
Basic operations ............................. 10
Playing back two sources at a time ........ 40
Sound adjustments ......................... 41
Selecting preset sound modes ....... 41
Storing your own sound adjustments..... 41
Adjusting the sound ............................... 42
Setting the clock .................................... 11
General settings — PSM ................ 44
Radio operations ............................ 12
Basic procedure ..................................... 44
Listening to the radio .................... 12
Other main functions ...................... 48
Storing stations in memory .................... 14
Listening to a preset station ................... 15
FM RDS operations ........................ 16
Searching for your favorite
FM RDS programme ................ 16
Storing your favorite programmes ......... 17
Using the standby receptions ................. 17
Tracking the same programme
—Network-Tracking Reception ......... 18
Disc operations .............................. 19
Playing a disc in the receiver ....... 19
Basic operations .................................... 21
DVD/VCD special functions ............ 23
Selecting audio languages .....................
Selecting subtitles ..................................
Selecting multi-angle views...................
Disc menu operations ............................
Zoom in..................................................
23
23
23
24
24
On-Screen disc operations ............... 25
Assigning titles to the sources ............... 48
Detaching the control panel ................... 49
Changing the control panel angle .......... 49
CD changer operations .................... 50
Playing discs in the CD changer.... 50
Selecting the playback modes................ 52
External component operations ............ 53
Playing an external component .... 53
DAB tuner operations ..................... 54
Listening to the DAB tuner ........... 54
Storing DAB services in memory ..........
Tuning in to a preset DAB service ........
Using the standby receptions .................
Tracing the same programme
—Alternative Frequency Reception....
56
56
57
58
Maintenance .................................. 59
Language codes .............................. 60
Basic on-screen bar operations .............. 26
Basic control screen operations ............. 28
List screen operations ............................ 29
More about this receiver................. 61
AV setup menu .............................. 30
Specifications ................................. 71
Basic setting procedure .......................... 30
ENGLISH
Contents
Troubleshooting ............................. 66
5
AVX1EN_book.indb 5
05.2.23 11:48:00 PM
ENGLISH
Introduction — Playable discs
Discs you can play
Caution for DualDisc playback
You can play back the following discs (12 cm
and 8 cm) on this receiver:
• DVD Video: Recorded in PAL color system
with Region Code “2” (see below).
– DVD-R/DVD-RW recorded in the DVDVideo format can also be played.
• Video CD (VCD)/audio CD
• MP3/WMA/JPEG: Recorded either in CDR/CD-RW or DVD-R/DVD-RW/DVD-ROM.
– CD-R/CD-RW: Compliant with ISO 9660
Level 1, ISO 9660 Level 2, Romeo, and
Joliet.
– DVD-R/DVD-RW/DVD-ROM: Compliant
with UDF-Bridge Format*1.
• The Non-DVD side of a “DualDisc” does
not comply with the “Compact Disc Digital
Audio” standard. Therefore, the use of NonDVD side of a DualDisc on this product may
not be recommended.
On some discs, the actual operations may be
different from what is explained in this manual.
Discs cannot be played back
DVD-Audio, DVD-ROM (data), DVD-RAM,
DVD-R/DVD-RW recorded in the DVD-VR
format, CD-ROM, CD-I (CD-I Ready), Photo
CD, etc.
• Playing back these discs will generate noise
and damage the speakers.
Note on Region Code:
DVD players and DVD Video discs have
their own Region Code numbers. This
receiver can only play back DVD discs
whose Region Code numbers include “2”.
Examples:
If you insert a DVD Video disc of an
incorrect Region Code
“Region Error” appears on the monitor on
the unit.
“REGION CODE ERROR!” appears on the
external monitor.
Digital audio formats
The System can play back the following digital
audio formats.
Linear PCM: Uncompressed digital audio,
the same format used for CDs and most studio
masters.
Dolby Digital *2: Compressed digital audio,
developed by Dolby Laboratories, which
enables multi-channel encode to create the
realistic surround sound.
DTS *3 (Digital Theater Systems):
Compressed digital audio, developed by Digital
Theater Systems, Inc., which enables multichannel like Dolby Digital. As the compression
ratio is lower than for Dolby Digital, it provides
wider dynamic range and better separation.
MPEG Audio: Another compressed digital
audio which also enables multi-channel encode
to create the realistic surround sound. However,
this System downmix the multi-channel signals
into 2 channels (decoded PCM) and play it
back.
*1 A hybrid file system used to provide
compatibility with ISO 9660 for accessing
any type of files on the disc. (UDF stands for
Universal Disk Format.)
*2 Manufactured under license from Dolby
Laboratories. “Dolby” and the doubleD symbol are trademarks of Dolby
Laboratories.
*3 “DTS” and “DTS 2.0 + Digital Out” are
registered trademarks of Digital Theater
Systems, Inc.
“DVD Logo” is a trademark of DVD Format/
Logo Licensing Corporation registered in the
US, Japan and other countries.
6
AVX1EN_book.indb 6
05.2.23 11:48:01 PM
ENGLISH
Control panel
Parts identification
Monitor
indications
Ex.:
Source
screen
on JPEG
playback
1
t
w
e
y
r
2
3
4
5
6
7
KD-AVX1
OK
DISP
D
SOURCE
MENU
T/P
BACK BAND
8
9
p
1
(standby/on attenuator) button
2 • +/– (volume +/–) button
• SOURCE button
• MENU button
3 • 5 (up) / ∞ (down) buttons
•
4/¢
buttons
4 • OK button
• 3 (play) button
5 Monitor
6 D DISP (display) button
7 • 0 (eject) button
•
(angle) button
8 T/P (traffic programme/programme type)
button
9 Reset button
p • BACK button
• BAND button
• 7 (stop) button
q
(control panel release) button
q
Monitor indications
w Source indicator
e Main display
r Clock display
Also indicates volume level when adjusting
volume.
t Status indicators
y Alert information area
Also indicates volume level bar when
adjusting volume.
7
AVX1EN_book.indb 7
05.2.23 11:48:02 PM
ENGLISH
Remote controller —
RM-RK230
Installing the lithium coin battery
(CR2025)
Main elements and features
MONITOR CONTROL
MODE
ASPECT
MENU
DVD / RECEIVER CONTROL
ZOOM
ATT
+10
SOURCE
–100
PRESET
/ TITLE
BAND
Before using the remote controller:
• Aim the remote controller directly at the
remote sensor on the receiver. Make sure
there is no obstacle in between.
+100
/ TITLE
–10
OSD
DUAL
1
VOL
DISC+ 2
TOP M
4
2nd VOL
3
MENU
5
6
ENTER
7
DISC– 8
SETUP
9
RETURN
0
SHIFT
Remote
sensor
RM-RK230
• Do not expose the remote sensor to strong
light (direct sunlight or artificial lighting).
Warning:
• Do not install any battery other than
CR2025 or its equivalent; otherwise, it
may explode.
• Store the battery in a place where children
cannot reach to avoid risk of accident.
• To prevent the battery from over-heating,
cracking, or starting a fire:
– Do not recharge, short, disassemble, or
heat the battery or dispose of it in a fire.
– Do not leave the battery with other
metallic materials.
– Do not poke the battery with tweezers or
similar tools.
– Wrap the battery with tape and insulate
when throwing away or saving it.
The receiver is equipped with the steering
wheel remote control function.
• See the Installation/Connection Manual
(separate volume) for connection.
IMPORTANT:
If Dual Zone is activated (see page 40),
the remote controller only functions for
operating the DVD/CD player.
MONITOR CONTROL
1 Monitor control buttons*1
•
(standby/on), MODE, ASPECT,
MENU, and .
DVD/RECEIVER CONTROL
2
(standby/on attenuator) button
• Turns on and off the power and also
attenuates the sound.
3 SOURCE button
• Selects the source.
4 BAND button
• Selects the FM/AM/DAB bands.
8
AVX1EN_book.indb 8
05.2.23 11:48:02 PM
For advanced disc operations:
• /TITLE 5 / ∞
– Select the titles (for DVD) or folders
(for MP3/WMA).
• 4 / ¢ (reverse skip/forward skip)
• 1 / ¡ (reverse search/forward
search)*6
For FM/AM tuner operations:
• PRESET 5 / ∞
– Changes the preset stations.
• 4/¢
– Functions to search for stations.
Press briefly: auto search
Press and hold: manual search
For DAB tuner operations:
• PRESET 5 / ∞
– Changes the preset services.
• 4/¢
– Changes the services if pressed briefly.
– Searches the ensembles automatically if
pressed and held.
w OSD button
• Display the on-screen bar.
• Also function as the /TITLE button
when pressed with SHIFT button.
– You can directly select titles (for DVD)
or folders (for MP3/WMA) using the
number buttons (see page 22).
e MENU button*2
• Display the DVD and VCD*3 disc menu.
r Menu operation buttons*2
• Cursor (% , fi , @ , #) and ENTER
• % / fi : Also function as DISC + / –
buttons when the source is “CD-CH”.
t RETURN button*2
y Special function buttons
• DVD/VCD:
(audio)
• DVD:
(subtitle),
(angle)
ENGLISH
5 TOP M (menu) button*2
• Display the DVD and VCD*3 disc menu.
6 DUAL button
• Activate and deactivate Dual Zone.
7 VOL + / – buttons
• Adjusts the volume level.
• Also function as 2nd VOL +/– buttons
when pressed with SHIFT button.
8 SETUP button (for DVD/VCD)*2
9 SHIFT button
p Basic disc operation buttons*4:
7 (stop), 3 (play), 8 (pause)
• 3 (play) also function as ZOOM button
when pressed with SHIFT button.
q Advanced disc operation/tuner operation
buttons*5
*1 Controllable only if your monitor is one of
the JVC monitors — KV-MR9010 or
KV-MH6510.
*2 These buttons function as the number
buttons when pressed with SHIFT button.
*3 Only when PBC is not in use.
*4 Not used for CD changer operations.
*5 These buttons function as the +10/–10
and +100/–100 buttons when pressed with
SHIFT button.
*6 Not used for MP3/WMA/JPEG operations.
How to select a number
To select a number from 0 – 9:
To select a number greater than 9:
• +100/–100 buttons used only for searching
MP3/WMA/JPEG tracks number greater
than 99.
9
AVX1EN_book.indb 9
05.2.23 11:48:03 PM
ENGLISH
Getting started
Basic operations
SOURCE
MENU
BACK BAND
~
Turn on the power.
Ÿ
⁄
Adjust the volume.
SOURCE
SOURCE
MENU
MENU
Volume level indicator
You cannot select some sources if they
are not ready.
!
@
Adjust the sound as you want.
(See pages 41 – 43.)
For FM/AM tuner only
BACK BAND
For DAB tuner only
To drop the volume in a moment (ATT)
To restore the sound,
press it again.
To turn off the power
BACK BAND
10
AVX1EN_book.indb 10
05.2.23 11:48:04 PM
4 Finish the procedure.
ENGLISH
Setting the clock
OK
1
SOURCE
MENU
2 Select “PSM” menu.
OK
How to go back to the previous
menu
In the menu operations, you can go back
to the previous screens by pressing BACK
repeatedly.
Ex.:
3 Set the hour and minute.
1 Select “Clock Hr” (hour), then
adjust the hour.
2 Select “Clock Min” (minute), then
adjust the minute.
3 Select “24H/12H”, then select
“24Hours” or “12Hours”.
BACK BAND
• Press BACK repeatedly to go back to the
previous screens in operations explained
on the following pages when no particular
explanation exists.
• To cancel menu operations and return to
the source screen, press D DISP.
11
AVX1EN_book.indb 11
05.2.23 11:48:05 PM
ENGLISH
Radio operations
Listening to the radio
SOURCE
MENU
BACK BAND
To tune in to a station manually
~
SOURCE
MENU
In step ! on the left column...
1
TUNER (FM1/2/3,AM)
Ÿ
BACK BAND
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
2 Select the desired station frequencies.
Selected band appears.
!
Start searching for a station.
When a station is received, searching
stops.
To stop searching, press the same
button again.
12
AVX1EN_book.indb 12
05.2.23 11:48:06 PM
1
SOURCE
To tune in strong-signal FM station only
In step 2 on the left column....
1 Select “Lo/DX”, then set it to “Local”.
MENU
ENGLISH
When an FM stereo broadcast is hard to
receive
2 Select “MODE” menu.
OK
3 Select “MONO”, then set it to “On”.
2 Finish the procedure.
OK
Lights up when “Local” mode is activated.
Only stations with sufficient signal strength
will be detected.
4 Finish the procedure.
OK
To tune in to all receivable stations, repeat
the same procedure to set “Lo/DX” to “DX”.
The LO indicator goes off and the DX indicator
lights up.
Lights up when monaural mode is activated.
Reception improves, but stereo effect will
be lost.
To restore the stereo effect, repeat the same
procedure to set “MONO” to “Off”. The MO
indicator goes off.
13
AVX1EN_book.indb 13
05.2.23 11:48:06 PM
ENGLISH
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting—
SSM (Strong-station Sequential
Memory)
1
SOURCE
MENU
TUNER (FM1/2/3,AM)
2 Select the FM band (FM1 – FM3)
you want to store into.
BACK BAND
“-SSM-” is shown until automatic presetting
is over.
Local FM stations with the strongest signals are
searched and stored automatically in the FM
band.
Manual presetting
Ex.: Storing FM station of 92.5 MHz into the
preset number 1 of the FM1 band.
1
SOURCE
3 Select “MODE” menu.
MENU
TUNER (FM1/2/3,AM)
2
OK
4 Select “SSM”, then press “OK”.
BACK BAND
3
OK
14
AVX1EN_book.indb 14
05.2.23 11:48:08 PM
Listening to a preset station
While selecting TUNER as the source....
ENGLISH
4
1
The preset list appears.
2 Select the preset station (1 – 6) you
want.
PRESET LIST appears.
5
OK
OK
• You can also move to the preset list by
selecting “List” on the “MODE” menu. See
“When an FM stereo broadcast is hard to
receive” on page 13 to see how to move into
the “MODE” menu.
When using the remote controller....
“Preset1” flashes for a while.
How to exit from menus or lists
DISP
D
or
Menu or list operations are canceled and the
screen returns to the source screen or DVD/
VCD/JPEG playback.
15
AVX1EN_book.indb 15
05.2.23 11:48:09 PM
ENGLISH
FM RDS operations
Searching for your favorite FM RDS programme
T/P
BACK BAND
You can tune in to a station broadcasting your
favorite programme by searching for a PTY code.
• To store your favorite programme, see page
17.
~
!
Select one of the twenty-nine PTY
codes.
T/P
OK
If there is a station broadcasting a
programme of the same PTY code as
you have selected, that station is tuned
in.
PTY menu appears.
Ÿ
Select “PTY Search”.
OK
PTY codes
News, Affairs, Info, Sport, Educate, Drama,
Culture, Science, Varied, Pop M (music),
Rock M (music), Easy M (music),
Light M (music), Classics, Other M (music),
Weather, Finance, Children, Social, Religion,
Phone In, Travel, Leisure, Jazz, Country,
Nation M (music), Oldies, Folk M (music),
Document
PTY LIST appears.
16
AVX1EN_book.indb 16
05.2.23 11:48:10 PM
RDS (Radio Data System) allows FM
stations to send an additional signal along
with their regular programme signals.
By receiving the RDS data, this receiver can
do the following:
• Programme Type (PTY) Search (see page 16)
• Temporarily switches to Traffic
Announcement—TA Standby Reception.
(See the right column.)
• Temporarily switches to your favorite
programme—PTY Standby Reception. (See
pages 18 and 45.)
• Tracing the same programme automatically
—Network-Tracking Reception
(See page 18.)
• Programme Search (See page 45.)
Storing your favorite programmes
You can store six favorite programme types.
1
3 Select a preset number (Preset1–6)
you want to store the programme
into.
ENGLISH
What you can do with RDS
4 Select a PTY code you want to store.
OK
The selected preset number and PTY code
flash for a while.
5 Finish the procedure.
DISP
D
T/P
Using the standby receptions
2 Select “PTY Memory”.
OK
TA Standby Reception
TA Standby Reception allows the receiver to
switch temporarily to Traffic Announcement
(TA) from any source other than AM.
• The volume changes to the preset TA volume
level (see page 45).
• If the DAB tuner is connected, Standby
Reception also works to search for a DAB
service.
To activate TA Standby Reception
T/P
either lights up or
flashes.
To be continued....
17
AVX1EN_book.indb 17
05.2.23 11:48:11 PM
ENGLISH
• If
lights up, TA Standby Reception is
activated.
• If
flashes, TA Standby Reception is not
yet activated. (This occurs when you are
listening to an FM station without the RDS
signals required for TA Standby Reception.)
To activate TA Standby Reception, tune in to
another station (or DAB service) providing
these signals.
will stop flashing and
remain lit.
To deactivate the PTY Standby Reception,
select “OFF” on “PTY” in the “MODE” menu.
goes off.
• See “When an FM stereo broadcast is hard to
receive” on page 13 to see how to move into
the “MODE” menu.
Tracking the same programme—
Network-Tracking Reception
To deactivate the TA Standby Reception
T/P
goes off.
PTY Standby Reception
PTY Standby Reception allows the receiver
to switch temporarily to your favorite PTY
programme from any source other than AM.
• If the DAB tuner is connected, Standby
Reception also works to search for a DAB
service.
To activate and select your favorite PTY
code for PTY Standby Reception, see page
45.
either lights up or flashes.
When driving in an area where FM reception
is not sufficient enough, this receiver
automatically tunes in to another FM RDS
station of the same network, possibly
broadcasting the same programme with stronger
signals (see the illustration below).
When shipped from the factory, NetworkTracking Reception is activated (
lights up
when the power is turned on for the first time).
To change the Network-Tracking Reception
setting, see “AF-Regn’l” on page 45.
Programme A broadcasting on different
frequency areas (01 – 05)
• If
lights up, PTY Standby Reception is
activated.
• If
flashes, PTY Standby Reception is
not yet activated.
T/P
To activate PTY Standby Reception, tune in
to another station (or DAB service) providing
these signals. The PTY indicator will stop
flashing and remain lit.
18
AVX1EN_book.indb 18
05.2.23 11:48:12 PM
ENGLISH
Disc operations
Playing a disc in the receiver
The disc type is automatically detected, and
playback starts automatically (for DVD:
automatic start depends on its internal program).
If the current disc is an audio CD, CD Text,
MP3/WMA, JPEG, or VCD without PBC,
all tracks will be played repeatedly until you
change the source or eject the disc.
• If a title list or disc menu appears while
playing a DVD or VCD with PBC, see “Disc
menu operations” on page 24.
Before performing any operations, make
sure the following....
• For DVD playback, you can change the Setup
Menu setting to your preference. (See pages
30 – 33.)
• The operations explained on pages 21 – 29 are
using the remote controller.
•
shows functions which you can also
use on the unit.
• When you want to operate the DVD/CD
player using the buttons on the control panel,
see “Other disc operations” on pages 35 – 39.
The following marks are used to indicate
the playable discs....
DVD Video
Video CD with PBC
only
Video CD with/without
PBC
Audio CD/
CD Text
JPEG
MP3/WMA disc
If “ ” appears on the monitor when
pressing a button, the receiver cannot accept
an operation you have tried to do.
• In some cases, without showing “ ”,
operations will not be accepted.
• Microsoft and Windows Media are either
registered trademarks or trademarks of
Microsoft Corporation in the United States
and/or other countries.
JPEG disc
All discs listed here
19
AVX1EN_book.indb 19
05.2.23 11:48:12 PM
ENGLISH
• When inserting a DVD disc:
DVD playback starts automatically on the
monitor when the parking brake is applied.
The screen such as below appears when
pressing D DISP.
• When inserting a VCD:
VCD playback starts automatically on the
monitor when the parking brake is applied.
The screen such as below appears when
pressing D DISP.
PBC indicator*4
Elapsed
playing time
Current track
number
Elapsed
playing time
Current title Current chapter
number
number
• To return to DVD playback, press D DISP
again.
• When inserting an MP3/WMA/JPEG*1 disc:
*4 Light up when the disc has the PBC function.
• To return to VCD playback, press D DISP
again.
• When inserting a CD Text/audio CD:
Ex.: When an MP3 file is detected
Total playing time
of the inserted disc
Total track number
Total folder number
Total track number
of the inserted disc
DTS indicator*5
*2 Current folder/track number
Current track
number
Elapsed
playing time*3
Current folder name
*6
Current track name
*1 Each time you press D DISP, the monitor
changes between the source screen and
JPEG playback.
*2 Either the MP3 or WMA indicator lights up
depending on the detected file.
*3 Does not appear for JPEG disc.
Elapsed
playing time
*5 Appears when playing back a DTS CD.
*6 Disc title/performer and track title are
displayed when playing a CD Text.
To eject the disc
20
AVX1EN_book.indb 20
05.2.23 11:48:13 PM
ENGLISH
Basic operations
Operations
Monitor indication and/or next operation
To stop play temporarily
Playback is paused.
A still picture appears.
A Frame by frame playback
B Slow motion playback
• No sound comes out during Slow Motion Playback.
• When playing a VCD, Reverse Slow Motion Playback is
prohibited.
To resume normal play:
To replay the previous
scenes—One Touch Replay
OK
To stop playback
BACK BAND
The playback position moves back about 10 seconds
before the current position.
• This function works only within the same title.
• For some DVDs, this function does not work.
When you start playback again, playback
starts from where it has been stopped
(Resume play).
When you start playback again, playback starts from
the beginning of the last track.
JPEG
• During play, on-screen guide icons appear on the monitor for a while (see page 64).
To be continued....
21
AVX1EN_book.indb 21
05.2.23 11:48:14 PM
ENGLISH
To go to the next or previous
chapters/tracks
• For DVD: During play or pause
To the following
chapters/tracks.
To go back to the beginning of the current
chapter/track, then the previous chapters/tracks.
To fast-forward or reverse
the chapter/track
To locate a particular title/chapter/
track directly
• For DVD: During play or pause—select a
chapter.
During stop—select a title.
• For MP3/WMA/JPEG: Select a track
within the same folder.
Select the number corresponding to the item
you want (see page 9).
JPEG
To locate a title/folder
To the next title/folder.
Fast-forwards.
To the previous title/folder.
Reverses.
* The search speed changes to x2 ] x10 for all
discs (DVD, VCD, CD), but the information
shown on the monitor is only for DVD/VCD.
To locate a particular title/folder
To forward or reverse
search the chapter/track
Within 10 seconds,
press the number
buttons (see page 9).
The information shown is only for DVD/VCD:
IMPORTANT:
• To resume normal speed
• For MP3/WMA discs: It is required that folders are assigned with 2-digit number at the
beginning of their folder names—01, 02, 03,
and so on.
22
EN19-34_KD-AVX1[E].indd 22
05.3.28 1:37:13 PM
Selecting audio languages
For DVD:
You can select the language to listen to if
the disc has multiple audio languages.
1/3
ENGLISH
Selecting subtitles
You can select the language of the subtitle
to be shown on the monitor.
• You can set the initial subtitle language
using the setup menu (see page 30).
ENGLISH
DVD/VCD special functions
1/3
1/3
1/3
ENGLISH
ENGLISH
ENGLISH
Ex.: When the disc has 3 options
Ex.: When the disc has 3 options
For VCD:
You can select the audio channel to
play. (This is convenient when playing a
Karaoke VCD.)
• For some DVDs and VCDs, changing the
subtitle language, audio language (or audio
channel) without using the disc menu is
prohibited.
Selecting multi-angle views
ST
ST
You can view the same scene at different
angles if the disc has multi-angle views.
ST: To listen to normal stereo (left/right)
playback.
1/3
L:
To listen to the L (left) audio channel.
R:
To listen to the R (right) audio channel.
1/3
1
1
1/3
1/3
1
2
1/3
3
Ex.: When the disc has 3 multi-angle views
23
AVX1EN_book.indb 23
05.2.23 11:48:17 PM
ENGLISH
Disc menu operations
Menu-driven playback is possible while playing
back a DVD with menu-driven features or a
VCD with the PBC (PlayBack Control).
While playing a DVD
1
Canceling the PBC playback
1
2 Select a track to start normal playback using
the number buttons (see page 9).
To resume the PBC function
A title list or disc menu will appear on the
monitor.
Zoom in
2 Select the item you want on the
menu.
JPEG
1
Selected item starts playback.
• On some discs, you can also select items
using the corresponding number buttons.
While playing a VCD
• When a list of items is displayed on the
monitor.
ZOOM 1
ZOOM OFF
ZOOM 2
ZOOM 6
ZOOM 3
ZOOM 4
ZOOM 5
• For JPEG disc (effective only when
pausing):
ZOOM 1
ZOOM 2
ZOOM OFF
2 Move the zoomed-in position.
• To select a number greater than 9, see “How
to select a number” on page 9.
To return to the previous menus
• For JPEG files:
You cannot move the zoomed-in position
when the entire picture is still displayed
on the monitor.
To cancel zoom, select “ZOOM OFF” in
step 1.
24
AVX1EN_book.indb 24
05.2.23 11:48:18 PM
About the On-Screen Bar
You can check the disc information and use
some functions through the on-screen bar.
• For audio CD, CD Text, and MP3/WMA
disc you can use the on-screen bar only
when using an external monitor and Dual
Zone is on (see page 40).
• For audio CD, CD Text, and MP3/WMA
disc you can also use the control screen
and list screen (see pages 28 and 29).
On-Screen bars
DVD
VCD
MP3/WMA
REPEAT TRACK TIME 00:00:36
FILE
REPEAT INTRO RANDOM
1 Disc type
2 • Audio signal format type (for DVD and
DTS CD)
• PBC (only for VCD)
3 Current playback mode
4 Playback information
T01 C01
Current title/chapter
TRACK 01 Current track (for VCD)
TOTAL
Elapsed playing time of the disc
T. REM
Remaining disc time (for VCD)/
remaining title time (for DVD)
TIME
Elapsed playing time of the
current chapter/track
REM
Remaining time of the current
chapter/track
5 Playback condition
,
Playback
,
Forward/reverse search
,
Forward/reverse slowmotion
,
Pause
,
Stop
6 Operation icons
Time indication
,
Time Search—Enter the
elapsed playing time of the
current title or of the disc.
Title Search
Repeat play (for DVD)
REPEAT ,
Repeat play
INTRO ,
Intro play
RANDOM ,
Random play
ENGLISH
On-Screen disc operations
JPEG
REPEAT
OFF ‰ FOLDER
CD Text/audio CD
*
CD
5. 1ch
REPEAT TRACK TIME
00:36
REPEAT INTRO RANDOM
* Only for DTS CD
25
AVX1EN_book.indb 25
05.2.23 11:48:19 PM
ENGLISH
Basic on-screen bar operations
To erase the on-screen bar
1 Display the on-screen bar.
or
(twice) (DVD, VCD)
(CD Text/audio CD,
MP3/WMA, JPEG)
• The on-screen bar for a CD or MP3/WMA/
JPEG disc automatically disappears in a few
seconds after the last operation.
• The selectable options for Repeat/Intro/
Randam plays:
Repeat play (See page 37.)
When a JPEG disc is loaded, skip to step 3.
DVD:
2 Select an item.
3 Make a selection.
REPEAT
, REPEAT Repeat play (See page 37.)
VCD (while PBC is not in use):
(Canceled)
REPEAT
• If pop-up menu appears....
1
MP3/WMA:
REPEAT TRACK
REPEAT FOLDER
(Canceled)
JPEG:
FOLDER ‰ OFF
OFF ‰ FOLDER
(Canceled)
CD Text/audio CD:
or
REPEAT TRACK
(Canceled)
2
26
AVX1EN_book.indb 26
05.2.23 11:48:20 PM
INTRO
Intro play (See page 38.)
VCD (while PBC is not in use):
(Canceled)
INTRO
To search for a particular point by playing
time
1 Select
(or
).
2 Enter the elapsed playing time of the current
title or of the disc.
ENGLISH
INTRO ,
MP3/WMA:
INTRO TRACK
INTRO FOLDER
(Canceled)
CD Text/audio CD:
INTRO TRACK
RANDOM ,
(Canceled)
RANDOM Random play (See page 38.)
VCD (while PBC is not in use):
RANDOM
(Canceled)
Ex.: • To enter 1 (hours): 02 (minutes): 00
(seconds), press 1, 0, 2, 0, then 0.
• To enter 54 (minutes): 00 (seconds),
press 0, 5, 4, 0, then 0.
• It is always required to enter the hour
digit (even “0” hour), but it is not
required to enter trailing zeros (the last
two digits in the examples above).
• To correct a misentry, press....
MP3/WMA:
RANDOM FOLDER
RANDOM DISC
• You can also specify the elapsed playing
time by using % / fi / @ / #.
(Canceled)
CD Text/audio CD:
RANDOM DISC
3 Finish the procedure.
(Canceled)
To search for a particular title
Refer also page 25 for the following operations.
To change the time information
1 Select
.
2 Enter the number.
1 Select
.
2 Change the time information.
TIME 0:00:58
REM 0:11:23
T. REM 0:35:24
TOTAL 1:01:58
• To correct a misentry, press the number
button until the correct number is entered.
3 Finish the procedure.
27
AVX1EN_book.indb 27
05.2.23 11:48:22 PM
ENGLISH
Basic control screen operations
You can search for and play the desired items
through the control screen when using the
external monitor.
• The control screen automatically appears on
the monitor when you insert a disc (external
monitor only).
• JPEG control screen appears only when
playback stops.
MP3/WMA/JPEG control
screen
Track Information
Album
Weather
Artist
Robert M. Smith
Title
Rain
1
2
3
4
5
6
7
8
9
p
While Dual Zone (see page 40) is on....
1 Select “ Folder” column or “ Track” column
on the control screen.
2 Select a folder or track.
JPEG
REPEAT TRACK TIME 00:00:14
Folder :
2/3
01 Music
02 Music
03 Music
To select a folder or track
Track : 5 / 14 (Total 41)
Cloudy.mp3
Fair.mp3
Fog.mp3
Hail.wma
Indian summer.mp3
Rain.mp3
Shower.mp3
Snow.mp3
Thunder.wma
Typhoon.mp3
Wind.mp3
Winter sky.mp3
Current folder
Current folder number/total folder number
Folder list
Selected playback mode
Elapsed playing time of the current track
(MP3/WMA only)
Operation mode icon (MP3/WMA only)
‰ (play), 7 (stop), 8 (pause)
Current track (file) number/total number
of tracks (files) in the current folder (total
number of tracks/files on the disc)
Track information (MP3/WMA only)
Track (file) list
Current track (file) (highlighted bar)
CD Text/audio CD control
screen
REPEAT TRACK
Track Information
Album
Four seasons
Artist
Robert M. Smith
Title
Rain
TIME
00:14
Track : 5 / 14
Cloudy
Fair
Fog
Hail
Indian summer
Rain
Shower
Snow
Thunder
Typhoon
Wind
Winter sky
1 Selected playback mode
2 Elapsed playing time of the current track
3 Operation mode icon
‰ (play), 7 (stop), 8 (pause), ¡ (fastforward), 1 (reverse)
4 Current track number/total number of tracks
on the disc
5 Track information
6 Track list
7 Current track (highlighted bar)
To select a track
28
EN19-34_KD-AVX1[E].indd 28
05.3.28 1:37:15 PM
While Dual Zone is on and the disc play stops....
You can display the folder list/track list before
starting play when using the external monitor
and Dual Zone function (see page 40). On this
list, you can confirm the contents and start
playing a disc.
1 Display the folder list.
Each time you press the button,
the list screen comes on and
goes off.
ENGLISH
For MP3/WMA/JPEG:
List screen operations
2 Select a folder on the list.
Folder/track list
screens
JPEG
Folder list (MP3/WMA/JPEG)
Folder : 153/240 Track 154/198
fol140
fol150
fol130
fol141
fol151
fol131
fol142
fol152
fol132
fol143
fol153
fol133
fol144
fol154
fol134
fol145
fol155
fol135
fol146
fol156
fol136
fol147
fol157
fol137
fol148
fol158
fol138
fol149
fol159
fol139
Page : 4/6
fol160
fol161
fol162
fol163
fol164
fol165
fol166
fol167
fol168
fol169
The track list of the selected folder appears.
To go back to the folder list
3 Select a track on the list.
Track list (MP3/WMA/JPEG/CD Text/audio
CD)
Folder : 153/240 Track 154/198
file0131.mp3 file0141.mp3 file0151.wma
file0132.mp3 file0142.mp3 file0152.mp3
file0133.wma file0143.mp3 file0153.wma
file0134.mp3 file0144.mp3 file0154.mp3
file0135.mp3 file0145.wma file0155.mp3
file0136.wma file0146.mp3 file0156.mp3
file0137.wma file0147.wma file0157.mp3
file0138.mp3 file0148.mp3 file0158.wma
file0139.mp3 file0149.wma file0159.wma
file0140.wma file0150.wma file0160.wma
Page : 4/6
file0161.wma
file0162.mp3
file0163.wma
file0164.mp3
file0165.wma
file0166.wma
file0167.wma
file0168.wma
file0169.mp3
file0170.wma
Ex.: Track list for MP3/WMA
1 Current folder number/total folder number
(only for MP3/WMA/JPEG)
2 Current track number/total number of tracks
in the current folder (for MP3/WMA/JPEG)
or in the disc (for CD Text/audio CD)
3 Current page/total number of the pages
included in the list
4 Current folder/track (highlighted bar)
For CD Text/audio CD:
While Dual Zone is on and the disc play stops....
1 Display the track list.
Each time you press the button,
the list screen comes on and
goes off.
2 Select a track on the list.
29
AVX1EN_book.indb 29
05.2.23 11:48:24 PM
ENGLISH
AV setup menu
You can store the initial disc playback status.
• While playing, no change can be made on the
setup menu.
4 Select an item you want to set up.
Basic setting procedure
While stop....
1
SOURCE
MENU
2 Select “MODE” menu.
OK
Ex.: When selecting “DOWN MIX”
5 Select an option.
OK
MODE menu
when a DVD is
loaded
To set other items, repeat steps 4 and 5.
6 Finish the procedure.
DISP
D
3 Select “Set Up”.
OK
30
AVX1EN_book.indb 30
05.2.23 11:48:25 PM
4
From the remote controller:
5 Select an option.
ENGLISH
You can also set up from the remote controller
when a DVD or a VCD is inserted.
• While playing, no change can be made on the
setup menu.
• When shipped from the factory, the on-screen
languge is set to English. To change the
language, see page 32.
AUDIO
DIGITAL AUDIO OUTPUT
STREAM/PCM
DOWN MIX
STEREO
DOLBY SURROUND
ONSTEREO
D. RANGE COMPRESSION
While stop....
1
AUDIO
LANGUAGE
MENU LANGUAGE
ENGLISH
AUDIO LANGUAGE
ENGLISH
SUBTITLE
ENGLISH
ON SCREEN LANGUAGE
ENGLISH
DIGITAL AUDIO OUTPUT
STREAM/PCM
DOWN MIX
STEREO
DOLBY SURROUND
ONSTEREO
D. RANGE COMPRESSION
6
2
AUDIO
DIGITAL AUDIO OUTPUT
STREAM/PCM
DOWN MIX
DOLBY SURROUND
D. RANGE COMPRESSION
ON
AUDIO
DIGITAL AUDIO OUTPUT
STREAM/PCM
DOWN MIX
STEREO
D. RANGE COMPRESSION
ON
To set other items on the same menu
Repeat steps 3 to 6.
Ex.: When selecting the “AUDIO” menu
To set other items on other menus
3 Select an item you want to set up.
Repeat steps 2 to 6.
To return to the normal screen
AUDIO
DIGITAL AUDIO OUTPUT
STREAM/PCM
DOWN MIX
STEREO
D. RANGE COMPRESSION
ON
Ex.: When selecting “DOWN MIX”
31
AVX1EN_book.indb 31
05.2.23 11:48:26 PM
ENGLISH
Item
Contents
MENU LANGUAGE
Select the initial disc menu language.
AUDIO LANGUAGE
Select the initial audio language.
SUBTITLE
Select the initial subtitle language or erase the subtitle (OFF).
ON SCREEN LANGUAGE
(OSD LANGUAGE)
Select the language for the Setup menu called up from the remote
controller (see page 31) and some indications shown on the monitor.
• The language for the menus called up from the unit does not
change.
MONITOR TYPE
Select the monitor type to watch a wide screen picture on your
monitor.
• 16:9 : Select this when the aspect ratio of your monitor is 16:9.
• 4:3LB [LETTER BOX] : Select this when the aspect ratio of your
monitor is 4:3. While viewing a wide screen picture, the black bars
appear on the top and the bottom of the screen.
• 4:3PS [PAN SCAN] : Select this when the aspect ratio of your
monitor is 4:3.
While viewing a wide screen picture, the black bars do not appear;
however, the left and right edges of the pictures will not be shown
on the screen.
16:9
4:3 LETTER BOX
4:3 PAN SCAN
OSD POSITION
Position 1
MP3/JPEG
Position 2
Select the position of the on-screen bar for CD and MP3/WMA (see
page 25) on the external monitor and AV set up menu from the remote
controller (see page 31).
• 1 : Higher position
• 2 : Lower position
The position of other indications than the on-screen bar does not
change.
Select playback file type when a disc contains both MP3 and JPEG
files.
• MP3 : Plays back MP3/WMA files.
• JPEG : Plays back JPEG files.
Eject the disc and insert it again to make the new setting effective.
• For the LANGUAGE settings, see also the language codes list on page 60.
32
AVX1EN_book.indb 32
05.2.23 11:48:26 PM
Contents
DIGITAL AUDIO OUTPUT
(D. AUDIO OUTPUT)
Select the signal format to be emitted through the DIGITAL OUT
(Optical) terminal on the rear. For details, see page 65.
• PCM ONLY (PCM) : Select this when connecting an amplifier or a
decoder incompatible with Dolby Digital, DTS or MPEG Audio, or
connecting to a recording device.
• DOLBY DIGITAL/PCM (DOLBY DIGITAL) : Select this when
connecting an amplifier or a decoder compatible with Dolby Digital.
• STREAM/PCM (STREAM) : Select this when connecting an
amplifier or a decoder compatible with Dolby Digital, DTS, and
MPEG Audio.
DOWN MIX
When playing back a multi-channel DVD disc, this setting affects the
signals reproduced through the LINE OUT jacks (and through the
DIGITAL OUT terminal when “PCM ONLY (PCM)” is selected for
“DIGITAL AUDIO OUTPUT (D.AUDIO OUTPUT)”).
• DOLBY SURROUND : Select this when you want to enjoy multichannel surround audio by connecting an amplifier compatible with
Dolby Surround to this receiver.
• STEREO : Normally select this.
D. (Dynamic) RANGE
COMPRESSION
(D. RANGE COMP.)
You can enjoy a powerful sound at low or middle volume levels
while playing a Dolby Digital software.
• AUTO : Select this to apply the effect to multi-channel encoded
software (excluding 1-channel and 2-channel software).
• ON : Select this to always use this function.
ENGLISH
Item
33
AVX1EN_book.indb 33
05.2.23 11:48:27 PM
ENGLISH
Monitor adjustments
You can adjust color and brightness of the
monitor on the unit.
5 Adjust the item.
While selecting disc (DVD, VCD, or JPEG disc
only) as the source....
1
SOURCE
MENU
2 Select “MODE” menu.
OK
Ex.: When adjusting “BRIGHT”
• Each time you press
4/¢
,
the menu screen disappears for a few
seconds and you can see the result of the
adjustment.
To adjust other items, repeat steps 4 and 5.
3 Select “Screen Cont.”
6 Finish the procedure.
DISP
D
Adjustable items
OK
4 Select an item to adjust.
BRIGHT: –15 to 0 to +15
Adjust if the picture is too bright or too
dark.
CONTRAST: –15 to 0 to +15
Adjust the contrast of the bright and dark
portion.
COLOR: –15 to 0 to +15
Adjust the color of the picture—lighter or
darker.
• TINT is fixed though appearing on the menu.
34
AVX1EN_book.indb 34
05.2.23 11:48:27 PM
Other disc operations
To fast-forward or
reverse the chapter/track
ENGLISH
In this section, you can learn how to use the
buttons on the control panel in order to operate
the DVD/CD player.
Basic operations
Fast-forwards.
To stop a disc
BACK BAND
To play a disc again
OK
Reverses.
• The search speed changes to x2 ] x10 for all
discs (DVD, VCD, CD), but the information
shown on the monitor is only for DVD/VCD.
To go to the next or previous
chapters/tracks
For DVD: During play or pause
To eject a disc
To the following chapters/tracks.
To the beginning of the current chapter/track,
then the previous chapters/tracks.
To go to the next or previous title
To next titles.
To previous titles.
35
AVX1EN_book.indb 35
05.2.23 11:48:28 PM
ENGLISH
To go to the next or previous
folders
Prohibiting disc ejection
JPEG
You can lock a disc in the loading slot.
1
To next folders.
To previous folders.
• To select a particular track in a folder (for
MP3/WMA disc) after selecting a folder:
2 Select “NO EJECT?”.
To change monitor
indication
JPEG
OK
DISP
D
• Each time you press D DISP, the monitor
changes between the source screen and DVD/
VCD/JPEG playback.
To scroll the disc information
For CD:
DISP
D
JPEG
Title-assigned CDs (see page 48)
and CD Text
“No Eject” flashes.
To cancel the prohibition, repeat the same
procedure to select “EJECT OK?”.
36
AVX1EN_book.indb 36
05.2.23 11:48:29 PM
ENGLISH
Selecting the playback modes
You can use only one of the following playback modes at a time.
1
SOURCE
Playback mode indicator appears.
MENU
2 Select “MODE” menu.
OK
3 Select your desired playback mode.
Repeat
• For DVD: During play or pause.
• For VCD: While PBC (see page 24) is
not in use.
Mode
Plays repeatedly
Chapter*1:
The current chapter.
•
lights up.
The current title.
•
lights up.
The current track.
•
lights up.
All tracks of the current folder.
•
lights up.
For DVD: Cancels Repeat play.
For other discs: All tracks of the
disc.
Title*1:
Track*2:
OK
Folder*3:
Off:
Ex.: When “Track” is selected
*1
Only while playing a DVD disc.
*2 Except for DVD and JPEG discs.
*3 Only while playing an MP3, a WMA, or a JPEG disc.
To be continued....
37
AVX1EN_book.indb 37
05.2.23 11:48:30 PM
ENGLISH
Mode
Random
Plays at random
*4
Folder :
Off:
All tracks of the current folder,
then tracks of the next folder and
so on.
•
lights up.
All tracks of the disc.
•
lights up.
Cancels.
Mode
Plays the first 15 seconds of
Track:
All tracks of the disc.
•
lights up.
First tracks of all folders.
•
lights up.
Cancels.
• For VCD: While PBC (see page 24) is
not in use.
Disc:
OK
Ex.: When “Disc” is selected
Intro
• For VCD: While PBC (see page 24) is
not in use.
OK
Folder*4:
Off:
Ex.: When “Track” is selected
*4
Only while playing an MP3 or a WMA disc.
38
AVX1EN_book.indb 38
05.2.23 11:48:31 PM
OK
You can display the folder list/file list and select
a folder/file directly while playing back.
ENGLISH
4 Select the list you want to use.
List screen operations
When “File” is selected, the file list of the
current folder appears.
Folder/file list screens
JPEG
Folder list
5 Select the folder/file you want.
OK
When selecting a folder from the list, the
playback of the first track in the folder
starts.
• The track list appears when selecting the
current folder on the folder list.
File list
• You can also access the folder list by pressing
and holding 5 / ∞.
While playing...
1
SOURCE
MENU
2 Select “MODE” menu.
OK
3 Select “LIST”.
OK
39
AVX1EN_book.indb 39
05.2.23 11:48:32 PM
ENGLISH
Dual Zone operations
Playing back two sources
at a time
You can connect external audio equipment
to the 2nd AUDIO OUT plug on the rear,
and play back a disc separately from the
source selected on the unit.
You can activate Dual Zone while listening to
any source.
• When Dual Zone is in use, you can only
operate the DVD/CD player using the remote
controller.
On the control panel:
You can also activate and deactivate Dual Zone.
1
SOURCE
MENU
2 Select “D-ZONE”.
OK
On the remote controller:
1 Activate Dual Zone.
3 Select “On”.
OK
The source automatically changes to
“DISC” and
appears on the monitor.
To select a different source to listen through
the speakers, press SOURCE on the control
panel.
• By using the buttons on the control panel,
you can operate the newly selected source
without affecting Dual Zone operations.
The source automatically changes to
“DISC” when Dual Zone is activated.
To cancel Dual Zone operations, select “Off”
on step 3.
2 Adjust the volume through the 2nd
AUDIO OUT plug.
3 Operate the DVD/CD player using
the remote controller by referring to
the monitor screen.
To cancel Dual Zone operations, repeat step 1.
(
disappears.)
40
AVX1EN_book.indb 40
05.2.23 11:48:33 PM
Selecting preset sound modes
You can select a preset sound mode suitable to
the music genre.
3 Select one of the preset sound modes.
ENGLISH
Sound adjustments
Available sound modes:
Hard Rock/R&B/Pop/Jazz/Dance/Country/
Reggae/Classic
User1/User2/User3
Flat (To cancel the sound mode)
1
4 Finish the procedure.
SOURCE
MENU
DISP
D
2 Select “EQ” menu.
OK
Ex.: When “Hard Rock” is selected
Storing your own sound
adjustments
You can adjust the sound modes and store your
own adjustments in memory.
After step 3 above....
1
OK
1 Select the frequency band to adjust—
60 Hz, 150 Hz, 400 Hz, 1kHz, 2.5kHz,
6.3kHz, 15kHz.
2 Adjust the level of the selected band
(–05 to +05).
3 Repeat steps 1 and 2 to adjust other
frequency bands.
3 Finish adjustment.
OK
2 Make adjustments as you like.
4 Select one of the user sound modes
(User1, User2, User3) you want to
store into.
OK
41
AVX1EN_book.indb 41
05.2.23 11:48:34 PM
ENGLISH
Adjusting the sound
You can adjust the sound characteristics to your preference.
1
SOURCE
MENU
2 Select “SEL” menu.
OK
3 Select your desired adjustment item.
Fad/Bal (Fader/Balance)
OK
Adjust fader—speaker output balance between the
front and rear speakers.
• Upmost—front only
• Downmost—rear only
When using a two-speaker system, set the fader
center.
Adjust balance—speaker output balance between
the left and right speakers.
• Leftmost—left only
• Rightmost—right only
42
AVX1EN_book.indb 42
05.2.23 11:48:35 PM
Adjust and store the volume level of each source
except FM.
Once you have made an adjustment, it
is memorized, and the volume level will
automatically increase or decrease by adjusted
level when you change the source.
Adjust to match the input level to the FM sound
level.
• –12 (min) to +12 (max.)
HPF (High pass filter)
Adjust the cut-off frequency to the front/rear
speakers according to the subwoofer setting.
• 55 Hz: Cuts off frequencies lower than 55 Hz.
• 85 Hz: Cuts off frequencies lower than 85 Hz.
• 125 Hz: Cuts off frequencies lower than
125 Hz.
• Through: Cuts off no frequencies.
ENGLISH
Vol Adjust (volume adjust)
See the article below for the subwoofer setting.
Sub Woofer
Adjust the settings below in the SetUp submenu.
• Volume: Subwoofer output level
• Freq.: Subwoofer cut-off frequency
• Phase: Subwoofer phase. Select which
reproduces a better sound from “Normal” and
“Reverse”.
OK
43
AVX1EN_book.indb 43
05.2.23 11:48:36 PM
ENGLISH
General settings — PSM
3 Select a PSM item.
Basic procedure
You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
SOURCE
MENU
Ex.: When you select “Dimmer”
4 Adjust the PSM item selected.
2 Select “PSM” menu.
OK
5 Repeat steps 3 and 4 to adjust the
other PSM items if necessary.
6 Finish the procedure.
OK
Indications
Selectable settings, [reference page]
WallPaper
You can select the background picture of the monitor from these:
Standard, Red, Amber, Green, SkyBlue, Blue, Purple.
Clock Hr
Hour adjustment
0 – 23 (1 – 12), [11]
[Initial: 0 (0:00)]
Clock Min
Minute adjustment
00 – 59, [11]
[Initial: 00 (0:00)]
24H/12H
Clock system
12Hours – 24Hours, [11]
[Initial: 24Hours]
CLK Adj
Automatic clock
adjustments
Auto:
Scroll*1
Once: [Initial]; Scrolls the disc information once.
Auto:
Repeats scrolling (5-second intervals in between).
Off:
Cancels.
• Even if “Scroll” is set to “Off”, you can scroll the display by
pressing D DISP for more than one second.
Off:
[Initial]; The built-in clock is automatically adjusted
using the clock time data in the RDS signal.
Cancels.
*1 Some characters or symbols will not be shown (and will be blanked) on the monitor.
44
AVX1EN_book.indb 44
05.2.23 11:48:37 PM
Selectable settings, [reference page]
Dimmer
Auto: [Initial]; Dims the monitor when you turn on the headlights.
Off:
Cancels.
On:
Activates dimmer.
Time Set: Sets the Dimmer On/Off time.
Bright
Brightness
You can adjust the brightness to make the monitor clear and legible.
–15 (darkest) to +15 (brightest)
[Initial]; 0
• You can also adjust the brightness on “Screen Cont.” on the
“MODE” menu when the source is DVD, VCD, or JPEG disc, [34].
ID3 Tag
Tag display
On: [Initial]; Shows the ID3 tag while playing MP3/WMA tracks.
Off: Cancels.
PTY Standby
PTY standby
Activates PTY Standby Reception with one of the 29 PTY codes,
[18].
News [Initial] and 28 PTY codes [16].
AF-Regn’l
Alternative frequency/
regionalization
reception
When the received signals from the current station become weak....
AF:
[Initial]; Switches to another station (the programme
may differ from the one currently received), [18].
•
lights up.
AF-Reg: Switches to another station broadcasting the same
programme.
•
and
light up.
Off:
Cancels (not selectable when “DAB AF” is set to
“AF On”).
TA Volume
Traffic announcement
volume
[Initial: VOL 15]; VOL 00 — VOL 30 or 50*2, [17]
P-Search
Programme search
On:
Off:
ENGLISH
Indications
Using the AF data, the receiver tunes in to another
frequency broadcasting the same programme as the
original preset RDS station is if the preset station signals
are not sufficient.
[Initial]; Cancels.
*2 Depends on the amplifier gain control.
To be continued....
45
AVX1EN_book.indb 45
05.2.23 11:48:38 PM
ENGLISH
Indications
Selectable settings, [reference page]
IF Filter
Intermediate frequency
filter
In some areas, adjacent stations may interfere with each other. If this
interference occurs, noise may be heard.
Auto: [Initial]; When this type of interference occurs, this
unit automatically increases the tuner selectivity so that
interference noise will be reduced. (But the stereo effect will
also be degraded.)
Wide: Subject to the interference from adjacent stations, but sound
quality will not be degraded and the stereo effect will not be
degraded.
DAB AF*1
Alternative frequency
reception
On:
Announce*
Announcement
Standby Reception
1
Off:
[Initial]; Traces the programme among DAB services and
FM RDS stations, [58].
Cancels.
Select one of the 9 announcement types for Announcement Standby
Reception.
Travel [Initial] O Warning O News O Weather O Event O
Special O Rad Inf (Radio Information) O Sports O Finance O
(back to the beginning)
EXT INPUT*2
External input
CHANGER: [Initial]; To use a JVC CD changer, [50].
EXT IN:
To use any external component, [53].
Beep
You can deactivate the key-touch tone if you do not want it to beep
each time you press a button.
On: [Initial]; Activates the key-touch tone.
Off: Cancels.
Rear SPK*3
Rear speaker output
On:
Off:
Telephone
Telephone muting
Muting1/Muting2: Select either one which mutes the sounds while
using the cellular phone.
Off: [Initial]; Cancels.
[Initial]; Select this to turn on the rear speaker output.
Cancels.
*1 Displayed only when DAB tuner is connected.
*2 Cannot be selected if the source is “CD-CH” or “EXT-IN”.
*3 Functions only when Dual Zone is activated (see page 40).
46
AVX1EN_book.indb 46
05.2.23 11:48:38 PM
Selectable settings, [reference page]
Amp Gain
Amplifier gain control
You can change the maximum volume level of this receiver.
High Power: [Initial]; VOL 00 – VOL 50
Low Power: VOL 00 – VOL 30 (Select this if the maximum power
of the speaker is less than 50 W to prevent them from
damaging the speaker.)
Off:
Deactivates the built-in amplifier.
AV INPUT
Audio-Video input
You can determine the use of LINE IN and VIDEO IN jacks on this
receiver.
Audio+Video: [Initial]; Select this when connecting an AV
component such as a VCR.
Audio:
Select this when connecting an audio component
such as a cassette deck.
Camera*4 :
Select this when connecting the rear view camera.
The rear view through the camera is automatically
displayed on the monitor when you change the gear
to the back position.
Camera Rev.*4 : The mirror image of the rear view through the
rear view camera is automatically displayed on
the monitor when you change the gear to the back
position. (The monitor on the unit only; the normal
rear view appears on the external monitor.)
ENGLISH
Indications
*4 Reverse gear signal connection is needed to change the monitor view automatically. See
Installation/Connection Manual (separate volume).
47
AVX1EN_book.indb 47
05.2.23 11:48:39 PM
ENGLISH
Other main functions
Assigning titles to the sources
4 Assign a title.
1 Select a character set.
DISP
You can assign titles to CDs (both in this
receiver and in the CD changer), and change the
source names of AV-INPUT and EXT-INPUT.
D
2 Select a character.
Maximum number of
characters
Sources
AV-INPUT/EXTINPUT
Up to 16 characters
DISC/CD-CH
Up to 32 characters (up
to 30 discs)
• For available characters, see page 4.
• You cannot assign a title to a DVD, VCD,
CD Text, an MP3/WMA disc, or a JPEG disc.
3 Move to the next (or previous)
character position.
1 Select the source.
• For AV-IN/EXT-IN: Select the source.
• For a CD in this receiver: Insert a CD.
• For CDs in the CD changer: Select
“CD-CH”, then select a disc number.
4 Repeat steps 1 and 2 until you
finish entering the title.
2
SOURCE
MENU
5 Finish the procedure.
3 Select “TITLE”.
OK
OK
Ex.: When
you select
“DISC” as
the source
To erase the entire title
In step 3 on the left column....
DISP
D
48
AVX1EN_book.indb 48
05.2.23 11:48:39 PM
Attaching the control panel
ENGLISH
Detaching the control panel
When detaching or attaching the control panel,
be careful not to damage the connectors on
the back of the control panel and on the panel
holder.
Detaching the control panel
Before detaching the control panel, be sure to
turn off the power.
Changing the control panel angle
The control panel comes out toward you.
The control panel changes its angle as follows.
Angle 1
Angle 2
Angle 4
Angle 3
Caution:
Do not insert your finger behind the control
panel.
49
AVX1EN_book.indb 49
05.2.23 11:48:40 PM
ENGLISH
CD changer operations
Playing discs in the CD changer
SOURCE
MENU
About the CD changer
It is recommended to use the JVC MP3compatible CD changer with your receiver.
• You can also connect other CH-X series
CD changers (except CH-X99 and
CH-X100). However, they are not
compatible with MP3 discs, so you cannot
play back MP3 discs.
• You cannot use the KD-MK series CD
changers with this receiver.
• Disc text information recorded in the CD
Text can be displayed when a JVC CD
Text compatible CD changer is connected.
Before operating your CD changer:
• Refer also to the Instructions supplied
with your CD changer.
• You cannot control and play any DVD,
VCD, WMA or JPEG disc in the CD
changer.
~
SOURCE
MENU
* If you have changed “EXT INPUT”
setting to “EXT IN” (see page 46),
you cannot select the CD changer.
Selected disc number
All tracks of the inserted discs in the magazine
will be played repeatedly until you change
the source or eject the magazine from the CD
changer.
50
AVX1EN_book.indb 50
05.2.23 11:48:40 PM
To fast-forward or reverse the track
ENGLISH
Ÿ
Select a disc.
1
Fast-forwards.
Reverses.
DISC LIST appears.
To go to the next or previous tracks
2
OK
To the following tracks.
To the beginning of the current track, then the
previous tracks.
To go to the next or previous folders (only
for MP3 discs)
To next folders.
• You can move to the other lists by pressing
4 / ¢.
• When the current disc is an MP3 disc, you
can move to FOLDER LIST by selecting it on
DISC LIST.
To previous folders.
When using the remote controller....
• You can also access the lists from the “MODE”
menu. See page 39 for the detail of the list
operations.
When using the remote controller....
DISC+
DISC–
51
AVX1EN_book.indb 51
05.2.23 11:48:41 PM
ENGLISH
Selecting the playback modes
You can use only one of the following playback
modes at a time.
1
SOURCE
Selectable modes
Repeat
Mode
Plays repeatedly
Track:
The current track.
•
lights up.
All tracks of the current folder.
•
lights up.
All tracks of the current disc.
•
lights up.
Cancels.
Folder*:
MENU
Disc:
2 Select “MODE” menu.
OK
Off:
Random
Mode
Plays at random
Folder*:
All tracks of the current folder,
then tracks of the next folder
and so on.
•
lights up.
All tracks of the current disc.
•
lights up.
All tracks of the inserted discs.
•
lights up.
Cancels.
3 Select your desired playback mode.
Disc:
All:
Off:
Intro
Mode
Plays the first 15 seconds of
Track:
All tracks of the inserted discs.
•
lights up.
First tracks of all folders in the
current disc.
•
lights up.
First tracks of all the inserted
discs.
•
lights up.
Cancels.
Folder*:
4 Finish the Procedure.
Disc:
OK
Off:
* Only while playing an MP3 disc
52
AVX1EN_book.indb 52
05.2.23 11:48:42 PM
ENGLISH
External component operations
Playing an external component
SOURCE
MENU
You can connect an external component to
LINE IN plug and VIDEO IN plug on the rear,
or to the CD changer jack on the rear using the
KS-U57 Line Input Adapter (not supplied) or
KS-U58 AUX Input Adapter (not supplied).
Ÿ
!
Turn on the connected component
and start playing the source.
Adjust the volume.
• For connection, see Installation/Connection
Manual (separate volume).
SOURCE
~
SOURCE
MENU
MENU
EXT-IN
AV-IN
For selecting the external
component connected to the
LINE IN and/or VIDEO IN
plug.
• To change the setting of AV INPUT,
see page 47.
• Volume indication does not appear
when the picture from VIDEO IN plug
is displayed on the unit. To check the
volume level, press D DISP before
volume adjustment.
AV-IN:
⁄
Adjust the sound as you want.
(See pages 41 – 43.)
EXT-IN:
For selecting the external
component connected to the
CD changer jack on the rear.
• If “EXT-IN” does not appear, see page
46 and select the external input (EXTIN).
53
AVX1EN_book.indb 53
05.2.23 11:48:43 PM
ENGLISH
DAB tuner operations
Listening to the DAB tuner
SOURCE
MENU
BACK BAND
~
SOURCE
Ÿ
!
MENU
Start searching for an ensemble.
When an ensemble is received,
searching stops.
To stop searching, press the same
button again.
BACK BAND
⁄
Current band
Select a service (either primary or
secondary) to listen to.
Programme
type
Service
label
Ensemble
label
To tune in to an ensemble manually
In step ! ....
Activate “Manual
Search”
Select ensemble
frequencies
54
AVX1EN_book.indb 54
05.2.23 11:48:43 PM
DAB can deliver CD quality sound without
any annoying interference and signal
distortion. Furthermore, it can carry text,
pictures, and data. When transmitting,
DAB combines several programmes (called
“services”) to form one “ensemble”. In
addition, each “service”—called “primary
service”—can also be divided into its
components (called “secondary service”).
A typical ensemble has six or more
programmes (services) broadcast at the same
time.
By connecting the DAB tuner, this receiver
can do the following:
• Tracing the same programme automatically
—Alternative Frequency Reception (see
“DAB AF” on page 46).
It is recommended to use DAB (Digital
Audio Broadcasting) tuner KT-DB1000
with your receiver. If you have another
DAB tuner, consult your JVC IN-CAR
ENTERTAINMENT dealer.
• Refer also to the Instructions supplied for
your DAB tuner.
When surrounding sounds are noisy
Some service provides Dynamic Range Control
(DRC) signals together with their regular
programme signals. DRC will reinforce the low
level sounds to improve for your listening.
1
SOURCE
MENU
2 Select “MODE” menu.
2, or 3).
ENGLISH
3 Select one of the DRC signals level (1,
What is DAB system?
The reinforcement level increases from 1
to 3.
4 Finish the procedure.
OK
DRC indicator
appears.
• The DRC indicator will be highlighted
only when receiving DRC signals from
the tuned service.
To search for your favorite service
You can search for either Dynamic or Static
PTY codes.
• Operations are exactly the same as explained
on page 16 for FM RDS stations.
• You cannot store PTY codes separately for
the DAB tuner and the FM tuner.
• Search will be performed on the DAB tuner
only.
OK
55
AVX1EN_book.indb 55
05.2.23 11:48:44 PM
ENGLISH
Storing DAB services in memory
You can preset six DAB services (primary) for
each band.
Ex.: Storing an ensemble (primary service) into
the preset number 4 of the DAB1 band.
When the source is DAB....
1
Tuning in to a preset DAB service
When the source is DAB....
1
BACK BAND
2
BACK BAND
2 Select an ensemble (primary service).
3 Select the preset number you want.
3
OK
PRESET LIST appears.
4 Select a preset number.
• You can move to the lists of the other
DAB bands by pressing 4/¢.
When using the remote controller....
To directly select the preset service
5 Store the service.
OK
Preset number flashes
for a while.
56
AVX1EN_book.indb 56
05.2.23 11:48:45 PM
2 Select “MODE” menu.
TA (Road Traffic News) Standby
Reception
• Operations are exactly the same as explained
on page 18 for FM RDS stations.
• You cannot activate TA Standby Reception
separately for the DAB tuner and for FM
tuner.
• The volume changes to the preset TA volume
level (see page 45).
ENGLISH
Using the standby receptions
OK
3 Select “Announce”.
PTY Standby Reception
• Operations are exactly the same as explained
on page 18 for FM RDS stations.
• PTY Standby Reception for DAB tuner works
only using a dynamic PTY code.
• You can neither store your favorite PTY nor
activate PTY Standby Reception separately
for the DAB tuner and for the FM tuner.
• You can activate and deactivate PTY Standby
Reception when the source is either “FM” or
“DAB”.
4
OK
ANN indicator
appears.
Announcement Standby Reception
Announcement Standby Reception allows the
receiver to switch temporarily to your favorite
service (announcement type).
To select your favorite announcement type,
see page 46.
To activate the Announcement Standby
Reception
1
SOURCE
MENU
Appears when the service is received.
• If the ANN indicator lights up,
Announcement Standby Reception is
activated.
• If the ANN indicator flashes,
Announcement Standby Reception is not
yet activated.
To activate, tune in to another service
providing these signals. The ANN
indicator will stop flashing and remain
lit.
To deactivate the Announcement Standby
Reception
Select “Off” in step 4 above.
The ANN indicator goes off.
57
AVX1EN_book.indb 57
05.2.23 11:48:46 PM
ENGLISH
Tracing the same programme—
Alternative Frequency Reception
To show the Dynamic Label Segment (DLS)
information
DISP
D
You can keep listening to the same programme
by activating the Alternative Frequency
Reception.
• While receiving a DAB service:
When driving in an area where a DAB service
cannot be received, this receiver automatically
tunes in to another ensemble or FM RDS
station, broadcasting the same programme.
• While receiving an FM RDS station:
When driving in an area where a DAB service
is broadcasting the same programme as the
FM RDS station is broadcasting, this receiver
automatically tunes in to the DAB service.
When shipped from the factory, Alternative
Frequency Reception is activated.
Service frequency
is displayed.
To deactivate the Alternative Frequency
Reception, see page 45.
While listening to an ensemble that
supports DLS....
*
Dynamic Label
Segment (DLS—
DAB radio text
information) is
displayed.
* Lights up when receiving a service
providing Dynamic Label Segment (DLS)—
DAB radio text information.
58
AVX1EN_book.indb 58
05.2.23 11:48:47 PM
How to clean the connectors
Frequent detachment will deteriorate the
connectors.
To minimize this possibility, periodically wipe
the connectors with a cotton swab or cloth
moistened with alcohol, being careful not to
damage the connectors.
To keep discs clean
A dirty disc may not play correctly.
If a disc does become dirty, wipe
it with a soft cloth in a straight line
from center to edge.
• Do not use any solvent (for example,
conventional record cleaner, spray, thinner,
benzine, etc.) to clean discs.
ENGLISH
Maintenance
To play new discs
New discs may have some rough
spots around the inner and outer
edges. If such a disc is used, this
receiver may reject the disc.
To remove these rough spots, rub the edges
with a pencil or ball-point pen, etc.
Connector
Moisture condensation
Moisture may condense on the lens inside the
DVD/CD player in the following cases:
• After starting the heater in the car.
• If it becomes very humid inside the car.
Should this occur, the DVD/CD player may
malfunction. In this case, eject the disc and
leave the receiver turned on for a few hours
until the moisture evaporates.
How to handle discs
Do not use the following discs:
Warped
disc
Sticker
Center holder
When removing a disc from
its case, press down the center
holder of the case and lift the
disc out, holding it by the
edges.
• Always hold the disc by the edges. Do not
touch its recording surface.
When storing a disc into its case, gently insert
the disc around the center holder (with the
printed surface facing up).
• Make sure to store discs into the cases after
use.
Disc
Sticker
residue
Stick-on
label
59
AVX1EN_book.indb 59
05.2.23 11:48:47 PM
ENGLISH
Language codes
Code
Language
Code
Language
Code
Language
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DZ
EL
EO
ET
EU
FA
FI
FJ
FO
FY
GA
GD
GL
GN
GU
HA
HI
HR
HU
HY
IA
IE
Afar
Abkhazian
Afrikaans
Ameharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Bhutani
Greek
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
IK
IN
IS
IW
JI
JW
KA
KK
KL
KM
KN
KO
KS
KU
KY
LA
LN
LO
LT
LV
MG
MI
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
NO
OC
OM
OR
PA
PL
PS
PT
QU
RM
Inupiak
Indonesian
Icelandic
Hebrew
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean (KOR)
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay (MAY)
Maltese
Burmese
Nauru
Nepali
Norwegian
Occitan
(Afan) Oromo
Oriya
Panjabi
Polish
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
RN
RO
RW
SA
SD
SG
SH
SI
SK
SL
SM
SN
SO
SQ
SR
SS
ST
SU
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU
Kirundi
Rumanian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
Yoruba
Zulu
60
AVX1EN_book.indb 60
05.2.23 11:48:48 PM
Basic operations
Turning on the power
• By pressing SOURCE on the receiver, you
can also turn on the power.
Selecting the sources
• When no disc is loaded in the receiver and
Dual Zone is off, “DISC” cannot be selected.
• Without connecting to the CD changer or the
DAB tuner, “CD-CH” or “DAB” cannot be
selected.
• If a DAB tuner is connected and Alternative
Frequency Reception for DAB services (DAB
AF) is activated, Network-Tracking Reception
(AF-Regn’l) is also activated automatically.
On the other hand, Network-Tracking
Reception cannot be deactivated without
deactivating Alternative Frequency Reception.
(See pages 45 and 46.)
• TA Standby Reception and PTY Standby
Reception will be temporarily canceled while
listening to an AM station.
ENGLISH
More about this receiver
Disc operations
Turning off the power
General
• If you turn off the power while listening to a
disc, disc play will start automatically, next
time you turn on the power.
• In this manual, words “track” and “file” are
interchangeably used when referring to MP3/
WMA/JPEG files and their file names.
• This receiver can also play back 8 cm discs.
• This receiver can only play back audio CD
(CD-DA) files if different type of files are
recorded in the same disc.
– The first track will be skipped if a different
type of file is detected first.
• When a disc has been loaded, selecting
“DISC” for the playback source starts disc
play.
Tuner operations
Storing stations in memory
• During SSM search....
– All previously stored stations are erased and
stations are stored newly.
– Received stations are preset in No. 1
(lowest frequency) to No. 6 (highest
frequency).
– When SSM is over, the station stored in
No. 1 will be automatically tuned in.
• When storing a station manually, a previously
preset station is erased when a new station is
stored in the same preset number.
FM RDS operations
• Network-Tracking Reception requires two
types of RDS signals—PI (Programme
Identification) and AF (Alternative
Frequency) to work correctly. Without
receiving these data correctly, NetworkTracking Reception will not operate.
Playing a DVD-R/DVD-RW or CD-R/
CD-RW
• Use only “finalized” discs.
• This receiver can play back only the files of
the same type which is first detected if a disc
includes both audio CD (CD-DA) files and
MP3/WMA files.
• This receiver can play back either MP3/WMA
files or JPEG files if a disc includes both kind
of files. Set the playback file type on AV
setup menu (page 32) before playing back a
disc containing both kind of files.
• Only for CD-R/CD-RW: This receiver can
play back multi-session discs; however,
unclosed sessions will be skipped while
playing.
To be continued....
61
AVX1EN_book.indb 61
05.2.23 11:48:49 PM
ENGLISH
• Some DVD-R/DVD-RW or CD-R/CD-RW
may not play back on this receiver because
of their disc characteristics, and for the
following causes:
– Discs are dirty or scratched.
– Moisture condensation occurs on the lens
inside the receiver.
– The pickup lens inside the receiver is dirty.
– CD-R/CD-RW on which the files are
written with “Packet Write” method.
– DVD-R/DVD-RW which are not written
in UDF-Bridge Format (eg. UDF format or
ISO format).
– There are improper recording conditions
(missing data, etc.) or media conditions
(stain, scratch, warp, etc.).
• DVD-RW/CD-RW may require a longer
readout time since the reflectance of DVDRW/CD-RW is lower than that of regular
discs.
• Do not use the following DVD-R/DVD-RW
or CD-R/CD-RW:
– Discs with stickers, labels, or protective seal
stuck to the surface.
– Discs on which labels can be directly
printed by an ink jet printer.
Using these discs under high temperatures or
high humidities may cause malfunctions or
damages to discs.
Playing an MP3/WMA disc
• This receiver can play back MP3/WMA files
with the extension code <.mp3> or <.wma>
(regardless of the letter case—upper/lower)
recorded in either CD-R/CD-RW or in
DVD-R/DVD-RW.
• This receiver can show the names of albums,
artists (performer), and ID3 Tag (Version 1.0,
1.1, 2.2, 2.3, or 2.4) for MP3 files and WMA
files.
• This receiver can display only one-byte
characters. No other characters can be
correctly displayed.
• This receiver can play back MP3/WMA files
meeting the conditions below:
– Bit rate: MP3: 32 kbps — 320 kbps
WMA: 32 kbps — 192 kbps
– Sampling frequency:
48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)
24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)
48 kHz, 44.1 kHz, 32 kHz (for WMA)
– Disc format: ISO 9660 Level 1/ Level 2,
Romeo, Joliet, Windows long file name
• The maximum number of characters for file/
folder names vary among the disc format used
(includes 4 extension characters—<.mp3> or
<.wma>).
– ISO 9660 Level 1: up to 12 characters
– ISO 9660 Level 2: up to 31 characters
– Romeo: up to 128 characters
– Joliet: up to 64 characters
– Windows long file name: up to 128
characters
• This receiver can recognize the total of
1100 files, 250 folders (maximum of 999 files
per folder).
• This receiver can play back the files recorded
in VBR (variable bit rate).
The files recorded in VBR have a discrepancy
in elapsed time display, and do not show
the actual elapsed time. Especially, after
performing the search function, this difference
becomes noticeable.
• This receiver cannot play back the following
files:
– MP3 files encoded with MP3i and MP3 PRO
format.
– MP3 files encoded in an unappropriated
format.
– MP3 files encoded with Layer 1/2.
– WMA files encoded with lossless,
professional, and voice format.
– WMA files which are not based upon
Windows Media® Audio.
– WMA files copy-protected with DRM.
– WMA files recorded with MBR (Multiple
Bit Rate) format.
– Files which have the data such as WAVE,
ATRAC3, etc.
62
AVX1EN_book.indb 62
05.2.23 11:48:49 PM
• It is recommended that you record a file
at 640 x 480 resolution. (If a file has been
recorded at a resolution of more than 640 x
480, it will take a long time to be shown.)
• This System can play only baseline JPEG
files. Progressive JPEG files or lossless JPEG
files cannot be played.
Baseline JPEG format: Used for digital
cameras, web, etc.
Progressive JPEG format: Used for web.
Lossless JPEG format: An old type and rarely
used now.
• If progressive or lossless JPEG files are
played back, a black screen appears. In this
case, stop playback and select a baseline
JPEG file. Note that it may take a long time to
select another file.
Changing the source
• If you change the source, playback also stops
(without ejecting the disc).
Next time you select “DISC” for the playback
source (without activating Dual Zone), disc
play starts automatically.
Ejecting a disc
• If the ejected disc is not removed within
15 seconds, the disc is automatically inserted
again into the loading slot to prevent it from
dust. (Disc will not play this time.)
DVD setup menu
• When the language you have selected is not
recorded on a disc, the original language is
automatically used as the initial language. In
addition, for some discs, the initial languages
settings will not work as you set due to their
internal disc programming.
• While playing (or pausing), you cannot
change these languages.
After you change any of these language
settings, eject the disc and insert it (or another
disc) again so that your setting takes effect.
• When you select “16:9” for a picture whose
aspect ratio is 4:3, the picture slightly changes
due to the process for converting the picture
width.
• Even if “4:3PS [PAN SCAN]” is selected, the
screen size may become
“4:3LB [LETTER BOX]” with some DVDs.
This depends on how they are recorded.
ENGLISH
Playing a JPEG disc
General settings—PSM
• If you change the “Amp Gain” setting from
“High Power” to “Low Power” while the
volume level is set higher than “VOL 30”, the
receiver automatically changes the volume
level to “VOL 30”.
Other main functions
• If you try to assign a title to a 31st disc,
“Name Full” flashes on the monitor. Delete
unwanted titles before assignment.
• Titles assigned to discs in the CD changer can
also be shown if you play back the disc on the
receiver.
DAB tuner operations
• PTY Standby Reception works for the DAB
tuner only using a Dynamic PTY, but not a
Static PTY.
• TA Standby Reception for FM RDS station
and Road Traffic News Standby Reception for
DAB cannot be set separately. The T/P button
always work for the both Standby Reception
modes when the DAB tuner is connected.
63
AVX1EN_book.indb 63
05.2.23 11:48:50 PM
ENGLISH
About sounds reproduced through the rear terminals
• Through the analog terminals (Speaker out/LINE OUT/2nd AUDIO OUT): 2-channel signal is
emitted.
When playing a multi-channel encoded disc, multi-channel signals are downmixed.
(DOWN MIX: see page 33.)
• Through DIGITAL OUT (optical):
Digital signals (Linear PCM, Dolby Digital, DTS, MPEG Audio) are emitted through this
terminal. (For more details, see page 65.)
To reproduce multi-channel sounds such as Dolby Digital, DTS, and MPEG Audio, connect
an amplifier or a decoder compatible with these multi-channel sources to this terminal, and set
“DIGITAL AUDIO OUTPUT (D. AUDIO OUTPUT)” correctly. (See page 33.)
• About Dual Zone
While you are listening to the radio, CD changer, or external component through the speakers
built into your car compartment, you can play back sound of this DVD/CD player connected to
the 2nd AUDIO OUT plug at the same time. (For details, see page 40.)
On-screen guide icons
During play, the following guide icons may appear for a while on the monitor.
: Appears at the beginning of a scene containing multi-audio languages (for DVD only).
: Appears at the beginning of a scene containing multi-subtitle languages (for DVD only).
: Appears at the beginning of a scene containing multi-angle views (for DVD only).
: Playback
: Pause
: Forward Slow Motion Playback (for DVD and VCD only)
: Reverse Slow Motion Playback (for DVD only)
: Forward search
: Reverse search
64
AVX1EN_book.indb 64
05.2.23 11:48:50 PM
Output signals are different depending on the “DIGITAL AUDIO OUTPUT” setting on the setup
menu (see page 33).
DIGITAL AUDIO OUTPUT
Playback Disc
Output Signals
STREAM/PCM
DVD 48 kHz, 16/20/24 bits Linear PCM
DTS bitstream
with Dolby Digital
48 kHz, 16 bits stereo Linear PCM
Dolby Digital bitstream
with MPEG Audio
PCM ONLY
48 kHz, 16 bits stereo Linear PCM
96 kHz, Linear PCM
with DTS
DOLBY DIGITAL/PCM
ENGLISH
Output signals through the DIGITAL OUT terminal
MPEG bitstream
Audio CD, Video CD
48 kHz, 16 bits
stereo Linear PCM
48 kHz, 16 bits Linear PCM
44.1 kHz, 16 bits stereo Linear PCM
Audio CD with DTS
DTS bitstream
MP3/WMA
44.1 kHz, 16 bits stereo Linear PCM
32/44.1/48 kHz, 16 bits Linear PCM
Sound modes (preset frequency level settings)
The list below shows the preset frequency level settings for each sound mode (see page 41).
Sound mode
Preset equalizing values
60 Hz
150 Hz
400 Hz
1 kHz
2.5 kHz
6.3 kHz
15 kHz
00
00
00
00
00
00
00
Hard Rock
+03
+03
+01
00
00
+02
+01
R&B
+03
+02
+02
00
+01
+01
+03
Pop
00
+02
00
00
+01
+01
+02
Jazz
+03
+02
+01
+01
+01
+03
+02
Dance
+04
+02
00
–02
–01
+01
+01
Country
+02
+01
00
00
00
+01
+02
Reggae
+03
00
00
+01
+02
+02
+03
Classic
+02
+03
+01
00
00
+02
00
Flat
65
AVX1EN_book.indb 65
05.2.23 11:48:50 PM
ENGLISH
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms
• Sound cannot be heard
from the speakers.
FM/AM
General
• The receiver does not
work at all.
Causes
Remedies
The volume level is set to
the minimum level.
Adjust it to the optimum
level.
Connections are incorrect.
Check the cords and
connections.
The built-in microcomputer
may have functioned
incorrectly due to noise, etc.
Reset the receiver
(see page 2).
• Remote controller does not Dual Zone is activated
work.
(see page 40).
While Dual Zone is
activated, remote controller
only functions for operating
the DVD/CD player.
• Nothing appears on the
monitor.
No video signal comes in
when the source is AV-IN.
• Change the source.
• Starts playback on the
external compornent
connected to the VIDEO
IN jack.
• Change AV INPUT setting
to “Audio” (see page 47).
• SSM automatic presetting
does not work.
Signals are too weak.
Store stations manually.
• Static noise while listening
to the radio.
The aerial is not connected
firmly.
Connect the aerial firmly.
• “No Text” appears on the
monitor.
The station does not support
RDS RT or the reception is
weak.
Check the Network-Tracking
Reception (see page 18).
66
AVX1EN_book.indb 66
05.2.23 11:48:51 PM
• Disc cannot be played
back.
Causes
Disc is inserted upside
down.
Disc playback
• CD-R/CD-RW or DVD-R/ CD-R/CD-RW or DVD-R/
DVD-RW cannot be played DVD-RW is not finalized.
back.
• Tracks on the CD-R/
CD-RW or DVD-R/
DVD-RW cannot be
skipped.
Remedies
Insert the disc correctly.
• Insert a finalized CD-R/
CD-RW or DVD-R/
DVD-RW.
• Finalize the CD-R/CD-RW
or DVD-R/DVD-RW with
the component which you
used for recording.
• Disc cannot be recognized. The DVD/CD player may
have functioned incorrectly.
Eject the disc forcibly
(see page 2).
• “No Disc” appears on the
monitor.
Disc is inserted incorrectly.
Insert the disc correctly.
• Sound and picture are
sometimes interrupted or
distorted.
You are driving on rough
roads.
Stop playback while driving
on rough roads.
Disc is scratched.
Change the disc.
Connections are incorrect.
Check the cords and
connections.
• No playback picture
(DVD, VCD) appears on
the monitor.
Parking brake wire is not
connected properly.
See Installation/Connection
Manual.
• No picture appears on the
external monitor at all.
The video cord is not
connected correctly.
Connect the video cord
correctly.
An incorrect input has
been selected on the TV or
monitor.
Select a correct input on the
TV or monitor.
“4:3PS [PAN SCAN]” is
selected when viewing on a
conventional TV
(aspect ratio 4:3).
Select “4:3LB [LETTER
BOX]”. (See page 32.)
• The left and right edges of
the picture are missing on
the screen.
ENGLISH
Symptoms
To be continued....
67
AVX1EN_book.indb 67
05.2.23 11:48:51 PM
ENGLISH
Symptoms
MP3/WMA playback
• Disc cannot be played
back.
Causes
Remedies
No MP3/WMA tracks are
recorded on the disc.
Change the disc.
MP3/WMA tracks do not
have the extension code
<.mp3> or <.wma> in their
file names.
Add the extension code
<.mp3> or <.wma> to their
file names.
MP3/WMA tracks are not
recorded in a compliant
format.
Change the disc.
Record MP3/WMA tracks
using a compliant application
(see page 6).
MP3/WMA tracks are
recorded in DVD+R/
DVD+RW media.
Change the disc.
Record MP3/WMA tracks
using DVD-R/DVD-RW
media.
• Noise is generated.
The track played back is not
an MP3/WMA file (although
it has the extension code
<.mp3> or <.wma>).
Skip to another track or
change the disc. (Do not add
the extension code <.mp3>
or <.wma> to non-MP3 or
WMA tracks.)
• A longer readout time is
required.
Readout time varies due to
the complexity of the folder/
file configuration.
Do not use too many
hierarchies and folders.
• Tracks cannot be played
back as you have intended
them to play.
Playback order is determined
when the files are recorded.
• Elapsed playing time is not This sometimes occurs
correct.
during play. This is caused
by how the tracks are
recorded on the disc.
• Correct characters are not
This receiver can only
displayed (e.g. album name). display a limited number
of special characters (see
page 4).
68
AVX1EN_book.indb 68
05.2.23 11:48:51 PM
JPEG playback
• Disc cannot be played
back.
• No picture appears on the
external monitor at all.
• “No Disc” appears on the
monitor.
Causes
Remedies
No JPEG files are recorded
on the disc.
Change the disc.
JPEG files do not have the
extension code <.jpg> or in
their file names.
Add the extension code
<.jpg> to their file names.
JPEG files are not recorded
in a compliant format.
Change the disc.
Record JPEG files using a
compliant application (see
page 6).
JPEG files are recorded in
DVD+R/DVD+RW media.
Change the disc.
Record JPEG files using
DVD-R/DVD-RW media.
The video cord is not
connected correctly.
Connect the video cord
correctly.
An incorrect input has
been selected on the TV or
monitor.
Select a correct input on the
TV or monitor.
No disc is in the magazine.
Insert disc into the magazine.
Disc is inserted upside down.
Insert disc correctly.
ENGLISH
Symptoms
CD changer
• “No Magazine” appears on No magazine is loaded in the Insert the magazine.
the monitor.
CD changer.
• “Reset08” appears on the
monitor.
This receiver is not
Connect this receiver and the
connected to the CD changer CD changer correctly and
correctly.
press the reset button of the
CD changer.
• “Reset01” – “Reset07”
appears on the monitor.
• The CD changer does not
work at all.
Press the reset button of the
CD changer.
The built-in microcomputer
may function incorrectly due
to noise, etc.
Reset the receiver
(see page 2).
69
AVX1EN_book.indb 69
05.2.23 11:48:52 PM
ENGLISH
DAB tuner
Symptoms
Causes
Remedies
• “No DAB Signal” appears
on the monitor.
Signal is too weak.
Search for another ensemble.
• “Reset08” appears on the
monitor.
This receiver is not
connected to the DAB tuner
correctly.
Connect this receiver and
the DAB tuner correctly and
reset the receiver
(see page 2).
• The DAB tuner does not
work at all.
The built-in microcomputer
may function incorrectly due
to noise, etc.
Reset the receiver
(see page 2).
• “Antenna Power NG”
appears on the monitor.
Something is wrong with the
DAB aerial.
Refer to the instructions
supplied for your DAB
tuner.
70
AVX1EN_book.indb 70
05.2.23 11:48:52 PM
Specifications
Maximum Power Output:
Front: 50 W per channel
Rear: 50 W per channel
Continuous Power Output (RMS):
Front: 20 W per channel into 4 Ω, 40 Hz
to 20 000 Hz at no more than 0.8%
total harmonic distortion.
Rear: 20 W per channel into 4 Ω, 40 Hz
to 20 000 Hz at no more than 0.8%
total harmonic distortion.
Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)
Equalizer Control Range:
Frequencies: 60 Hz, 150 Hz, 400 Hz, 1 kHz,
2.5 kHz, 6.3 kHz, 15 kHz
Level:
±10 dB
Signal-to-Noise Ratio: 70 dB
Line-In Level/Impedance:
1.5 V/20 kΩ load
Line-Out Level/Impedance:
5.0 V/20 kΩ load (full scale)
Output Impedance: 1 kΩ
Subwoofer-Out Level/Impedance:
2.0 V/20 kΩ load (full scale)
Color System: PAL
Video Input (composite): 1 Vp-p/75 Ω
Video Output (composite): 1 Vp-p/75 Ω
Other Terminals:
2nd AUDIO OUT, DIGITAL OUT
(optical), CD changer, Steering wheel
remote input (OE REMOTE)
TUNER SECTION
Frequency Range:
FM: 87.5 MHz to 108.0 MHz
AM: (MW) 522 kHz to 1 620 kHz
(LW) 144 kHz to 279 kHz
[FM Tuner]
Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)
50 dB Quieting Sensitivity:
16.3 dBf (1.8 µV/75 Ω)
Alternate Channel Selectivity (400 kHz): 65 dB
Frequency Response: 40 Hz to 15 000 Hz
Stereo Separation: 35 dB
Capture Ratio: 1.5 dB
[MW Tuner]
Sensitivity: 20 µV
Selectivity: 35 dB
ENGLISH
AUDIO AMPLIFIER SECTION
[LW Tuner]
Sensitivity: 50 µV
DVD/CD PLAYER SECTION
Signal Detection System: Non-contact optical
pickup (semiconductor laser)
Number of Channels: 2 channels (stereo)
Frequency Response:
DVD fs=48 kHz:
16 Hz to 22 000 Hz
fs=96 kHz:
16 Hz to 44 000 Hz
VCD, CD:
16 Hz to 20 000 Hz
Dynamic Range:
93 dB
Signal-to-Noise Ratio: 95 dB
Wow and Flutter: Less than measurable limit
MP3 : Max. Bit Rate: 320 kbps
WMA (Windows Media® Audio):
Max. Bit Rate: 192 kbps
MONITOR SECTION
Screen: 3-inch liquid crystal panel
Number of Pixels: 123 200 pixels
Drive Method:
TFT (Thin Film Transistor) active matrix
format
Color System: PAL
GENERAL
Power Requirement:
Operating Voltage:
DC 14.4 V (11 V to 16 V allowance)
Grounding System: Negative ground
Allowable Operating Temperature:
0°C to +40°C
Dimensions (W × H × D):
Installation Size (approx.):
182 mm × 52 mm × 160 mm
Panel Size (approx.):
188 mm × 58 mm × 18 mm
Mass (approx.):
2.0 kg (excluding accessories)
Design and specifications are subject to change
without notice.
71
AVX1EN_book.indb 71
05.2.23 11:48:52 PM
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
¿Tiene PROBLEMAS con la operación?
Por favor reinicialice su unidad
Consulte la página de Cómo reposicionar su unidad
Vous avez des PROBLÈMES de
fonctionnement?
Réinitialisez votre appareil
Référez-vous à la page intitulée Comment réinitialiser votre appareil
EN, SP, FR
© 2005 Victor Company of Japan, Limited
Rear_KD-AVX1[EU]_003A_f.indd 2
0205MNMMDWJEIN
2/18/05 11:11:15 AM