HOME THEATER DVD-AUDIO/VIDEO RECEIVER
AMPLI-TUNER CINEMA MAISON AVEC LECTEUR DVD AUDIO/VIDEO INTEGRE
RX-DV5SL
HOME THEATER
DVD-AUDIO/VIDEO RECEIVER
STANDBY/ON
DBS
VCR
TV
AUDIO
TV
TAPE
CDR
FM/AM
DBS
VCR
DVD
9/FF
TV/VIDEO REW/( TUNING/GROUP
REPEAT
SLEEP
FM MODE
STROBE
– TV/DBS CH +
CENTER
CONTROL EFFECT
1
ANALOG
/DIGITAL
TEST
INPUT
4
2
7
10/0
6
+
PAGE MUTING TV VOL
ZOOM
–
9
DBS
VCR
TV
TAPE/CDR
MASTER VOLUME
FM/AM
STANDBY
SOURCE NAME
STANDBY/ON
TV RETURN
PROGRESSIVE
DIMMER
+
DVD
REAR·R
8
– SUBWOOFER +
VFP
+10
100+
ANGLE
RX-DV5 HOME THEATER DVD-AUDIO/VIDEO RECEIVER
REAR·L
5
AUDIO SURR ON/OFF
SUBTITLE SURR MODE
3
–
DIGEST TOP MENU
+
VOLUME
–
MENU
DVD AUDIO
INPUT
SURROUND
MODE
ANALOG/DIGITAL ON/OFF
SETTING
ADJUST
MEMORY
COMPACT
CONTROL
SUPER VIDEO
CHOICE
ENTER
ON SCREEN
INPUT ATT.
REC MODE
DVD/SUPER VCD/VCD/CD
RETURN
REMOTE CONTROL RM-SRXDV5J
INSTRUCTIONS
MANUEL D’INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT0876-002A
[C]
RX-DV5SL[C]cover_1.pm5
1
02.8.5, 5:36 PM
Warnings, Cautions and Others
Mises en garde, précautions et indications diverses
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
For Canada/pour le Canada
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS
LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER
JUSQUAU FOND.
For Canada/pour le Canada
THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS
B LIMITS FOR RADIO NOISE EMISSIONS FROM DIGITAL
APPARATUS AS SET OUT IN THE INTERFERENCE-CAUSING
EQUIPMENT STANDARD ENTITLED “DIGITAL APPARATUS,”
ICES-003 OF THE DEPARTMENT OF COMMUNICATIONS.
CET APPAREIL NUMERIQUE RESPECTE LES LIMITES DE
BRUITS RADIOELECTRIQUES APPLICABLES AUX APPAREILS
NUMIRIQUES DE CLASSE B PRESCRITES DANS LA NORME
SUR LE MATERIEL BROUILLEUR: “APPAREILS
NUMERIQUES”, NMB-003 EDICTEE PAR LE MINISTRE DES
COMMUNICATIONS.
G-1
RX-DV5SL[C]safety_3.pm5
1
02.8.5, 5:33 PM
English
Français
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.
ATTENTION
Afin d’éviter tout risque d’électrocution, d’incendie, etc.:
1. Ne pas enlever les vis ni les panneaux et ne pas ouvrir le coffret
de l’appareil.
2. Ne pas exposer l’appareil à la pluie ni à l’humidité.
Caution––
STANDBY/ON button!
Disconnect the mains plug to shut the power off completely.
The
STANDBY/ON button in any position does not disconnect the
mains line.
The power can be remote controlled.
Attention—Touche
STANDBY/ON!
Déconnectez la fiche d’alimentation secteur pour couper
l’alimentation complètement.
La touche
STANDBY/ON, dans n’importe quelle position, ne
déconnecte pas le système du secteur.
Le courant peut être télécommandé.
IMPORTANT FOR LASER PRODUCTS
IMPORTANT POUR LES PRODUITS LASER
1. CLASS 1 LASER PRODUCT
2. CAUTION: Visible and invisible laser radiation when open and
interlock failed or defeated. Avoid direct exposure to beam.
3. CAUTION: Do not open the top cover. There are no user serviceable parts inside the Unit; leave all servicing to qualified service
personnel.
1. PRODUIT LASER CLASSE 1
2. DANGER: Radiations laser visibles et invisibles lorsque le boîtier
de l’appareil est ouvert et que le verrouillage est défaillant ou a été
annulé.
3. ATTENTION: Ne pas ouvrir le couvercle du dessus. Il n’y a aucune
pièce utilisable à l’intérieur. Laisser à un personnel qualifié le soin
de réparer votre appareil.
G-2
RX-DV5SL[C]safety_3.pm5
2
02.8.5, 6:43 PM
English
Table of Contents
Parts Identification ...................................... 2
Creating Realistic Sound Fields ................... 25
Front Panel ................................................................................. 2
Remote Control .......................................................................... 3
Activating Surround Mode ........................................................ 27
Selecting Surround Modes ........................................................ 27
Adjusting Surround Mode Using Remote Control................... 28
Getting Started ........................................... 4
Before Installation ...................................................................... 4
Checking the Supplied Accessories ........................................... 4
Putting Batteries in the Remote Control .................................... 4
Connecting the FM and AM Antennas ....................................... 5
Connecting the Speakers ............................................................ 6
Connecting Audio/Video Components ....................................... 7
7 About connecting cords ...................................................... 7
7 TV connection .................................................................... 8
7 VCR connection ................................................................. 9
7 DBS tuner connection ......................................................... 9
7 Cassette deck/CD recorder connection ............................. 10
7 Digital connection ............................................................. 10
Basic Operations ....................................... 11
1 Turn On the Power ............................................................... 11
2 Select the Source to Play ..................................................... 11
3 Adjust the Volume ................................................................ 11
Turning Off the Sounds Temporarily ....................................... 12
Turning Off the Power with the Sleep Timer ........................... 12
Changing the Display Brightness ............................................. 12
Changing the Source Name ...................................................... 12
Selecting the Analog or Digital Input Mode ............................ 13
Changing the Digital Input Mode Manually ............................ 13
Attenuating the Input Signal .................................................... 14
Changing the Scanning Mode .................................................. 14
Activating the Recording Mode ............................................... 14
Basic DVD Player Operations ...................... 15
1
2
3
4
5
6
7
8
Open the Disc Tray .............................................................. 15
Load a Disc .......................................................................... 15
Start Playback ...................................................................... 15
Adjust the Volume ................................................................ 16
Activate Realistic Sound Field ............................................. 16
Select Surround Mode ......................................................... 16
Stop Playback ...................................................................... 16
Turn Off the Power (into Standby) ...................................... 16
Tuner Operations ....................................... 17
Tuning into Stations Manually ................................................. 17
Using Preset Tuning ................................................................. 17
Selecting the FM Reception Mode ........................................... 18
Basic Settings ........................................... 19
Operation Buttons .................................................................... 19
Operating Procedure ................................................................. 19
7 Speaker information—“SUBWFR,” “FRNT SP,”
“CNTR SP,” and “REAR SP” ........................................... 20
7 Speaker distance
—“FRNT D,” “CNTR D,” and “REAR D” ...................... 20
7 Crossover frequency—“CROSS” ..................................... 21
7 Low frequency effect attenuator—“LFE” ........................ 21
7 Dynamic range compression—“D.COMP” ...................... 21
7 Digital input (DIGITAL IN) terminals—“DGT” ............. 21
7 Auto surround—“AUTO SR” ........................................... 22
7 Video output mode—“VOUT” ......................................... 22
Sound Adjustments.................................... 23
Operation Buttons .................................................................... 23
Operating Procedure ................................................................. 23
7 Front speaker output balance—“BAL” ............................. 24
7 Tone—“BASS” and “TREBLE” ...................................... 24
7 Speaker output levels—“SUBWFR,” “CENTER,”
“REAR L,” and “REAR R” .............................................. 24
7 DAP effect level—“EFFECT” .......................................... 24
DVD Player Operations .............................. 29
Disc Information ....................................................................... 29
Using the On-screen Bar .......................................................... 31
Basic Operation through the On-screen Bar ............................ 32
Changing the Time Indication .................................................. 32
Locating a Desired Scene from the Disc Menu ....................... 33
Selecting a View Angle—ANGLE ........................................... 34
Changing the Languages—SUBTITLE and AUDIO ............... 35
Playing from a Specified Position on a Disc ............................ 37
7 Locating a desired chapter/track—
Chapter/Track Search ....................................................... 37
7 Locating a desired position—Time Search ....................... 37
7 Locating a desired scene—DIGEST................................. 38
Special Picture Playback .......................................................... 39
7 Frame-by-frame playback................................................. 39
7 Showing continuous still pictures—STROBE .................. 39
7 Playing back in slow-motion ............................................ 39
7 Zooming in—ZOOM ........................................................ 39
7 Changing the VFP setting—VFP ...................................... 40
Program Playback and Random Playback ............................... 41
Repeat Playback ....................................................................... 42
Additional Information for DVD AUDIO ................................ 43
Special Playback for DVD AUDIO .......................................... 43
MP3 Disc Playback .................................... 45
Basic Operations ...................................................................... 45
Operations through the MP3 CONTROL Screen .................... 46
Repeat Playback ....................................................................... 46
JPEG Disc Playback ................................... 47
Slide-show Playback ................................................................ 47
Operations through the JPEG CONTROL Screen ................... 48
Repeat Playback ....................................................................... 48
Choice Menu Operations ............................. 49
Operation Buttons .................................................................... 49
Configuration of Choice Menu ................................................ 49
Operating Procedure................................................................. 50
7 LANGUAGE menu .......................................................... 51
7 PICTURE menu ................................................................ 51
7 AUDIO menu .................................................................... 52
• Language code list ......................................................... 52
7 SPK. SETTING menu ...................................................... 53
7 OTHERS menu ................................................................. 54
Restricting Playback by Parental Lock .................................... 55
7 Setting Parental Lock ........................................................ 55
7 Changing the setting of Parental Lock ............................. 56
7 Releasing Parental Lock temporarily ................................ 56
• Country/Area codes list for Parental Lock ..................... 57
Glossary for DVD Player............................. 58
AV COMPU LINK Remote Control System .... 59
Operating JVC’s Audio/Video Components........ 61
Operating Audio Components .................................................. 61
Operating Video Components .................................................. 62
Operating Other Manufacturers’ Equipment ..... 63
Changing the Preset Signal Codes ........................................... 63
Maintenance ............................................. 66
Troubleshooting ......................................... 67
Specifications ............................................ 70
1
EN01_10RX-DV5SL[C]4.pm5
1
02.8.5, 5:33 PM
English
Parts Identification
Front Panel
1
2
3
4
5
6
R X- D V5 H O ME T H EA T ER D VD - A U D IO /VID EO R EC EIVER
DVD
DBS
VCR
TV
TAPE/CDR
MASTER VOLUME
FM/AM
STANDBY
SOURCE NAME
STANDBY/ON
DVD AUDIO
INPUT
SURROUND
MODE
ANALOG/DIGITAL ON/OFF
SETTING
ADJUST
MEMORY
COMPACT
CONTROL
SUPER VIDEO
INPUT ATT.
7
REC MODE
8
9
DVD/SUPER VCD/VCD/CD
p
q
w e r
t
y
u
See pages in the parentheses for details.
9 SURROUND ON/OFF button (16, 27)
p SURROUND MODE button (16, 27)
REC MODE button (14)
q Display
• For details, see “Display” below.
w SETTING button (19 – 22)
e ADJUST button (23, 24)
r MEMORY button (17)
t CONTROL 5 / ∞ / 2 / 3 buttons (17 – 24)
y
(phones) jack (11)
u Remote sensor
1
STANDBY/ON button and STANDBY lamp (11)
2 Disc tray and illumination lamp (15)
3 DVD player operation buttons
0 (open/close), 4 (reverse skip), ¢ (forward skip),
7 (stop), 3 (play), 8 (pause)
4 Source selecting buttons (11, 13)
• DVD, DBS, VCR, TV, TAPE/CDR, FM/AM
5 SOURCE NAME button (12)
6 MASTER VOLUME control (11, 16)
7 DVD AUDIO lamp (43)
8 INPUT ANALOG/DIGITAL button (13)
INPUT ATT. (attenuator) button (14)
Display
1
2
3
4
5
ANALOG DIGITAL AUTO
PRO LOGIC DSP PROGRAM REPEAT 1A-B RANDOM PROGRESSIVE
AUTO SURROUND
TUNED STEREO AUTO MUTING SLEEP
DIGITAL L C R RESUME SPK. B.S.P BONUS
INPUT ATT
VOLUME
SUBWFR LFE
LS
6
S
7
kHz
MHz
RS
8
9 0
-
1 Input mode indicators (13)
• ANALOG, DIGITAL AUTO
2 Surround mode indicators (25, 26)
PRO LOGIC , DSP
•
3 Play mode indicators (41, 42, 46, 48)
• PROGRAM, REPEAT 1A-B, RANDOM
4 PROGRESSIVE indicator (14)
5 INPUT ATT indicator (14)
6 Sound signal indicators (13)
•
(DTS Digital Surround)
DIGITAL (Dolby Digital),
7 Signal and speaker indicators (27)
• L, C , R, SUBWFR (Subwoofer), LFE (Low Frequency Effect),
LS, S, RS
=
~
!
@
#
8 Surround indicators (27)
• AUTO SURROUND, SURROUND
9 RESUME indicator (16)
0 SPK. (speaker) indicator (11)
- DVD AUDIO indicators (43)
• B.S.P, BONUS
= Main display
~ Tuner mode indicators (17, 18)
• TUNED, STEREO, AUTO MUTING
! SLEEP indicator (12)
@ Frequency unit indicators
• MHz (for FM station), kHz (for AM station)
# VOLUME indication
2
EN01_10RX-DV5SL[C]4.pm5
2
02.8.5, 5:33 PM
English
Parts Identification
Remote Control
See pages in the parentheses for details.
1 Operation mode display
2
STANDBY/ON buttons (11, 62 – 65)
• DBS, VCR, TV, AUDIO
3 Source selecting buttons (11, 13, 61 – 65)
• TV, TAPE, CDR, FM/AM, DBS, VCR, DVD
4 TV/VIDEO button (15, 62, 63)
5 REPEAT button (42, 46, 48)
6 SLEEP button (12)
7 CONTROL button (24, 27, 28, 43, 44)
8 ANALOG/DIGITAL INPUT button (13)
9 AUDIO button (35, 36)
p SUBTITLE button (35)
q DIMMER button (12)
w ANGLE button (34)
PAGE + button (44)
e ZOOM button (39)
PAGE – button (44)
r MUTING button (12)
t DIGEST button (38)
y CHOICE button (49, 50)
u ON SCREEN button (31, 32, 34 – 38, 41, 42)
i Multi operation buttons
• 4, 3, ¢, 7, 8, REW, FF
• TUNING 9 and ( buttons (17)
• GROUP 9 and ( buttons (43)
• FM MODE button (18)
• STROBE button (39)
• TV/DBS CH (channel) + and – buttons (62, 63)
o Number buttons
• For selecting preset channels (18)
• For adjusting sound (24, 28, 61)
• For operating audio/video components (61 – 65)
• SURR (surround) ON/OFF button (16, 27)
• SURR (surround) MODE button (16, 27)
• VFP button (40)
• TV RETURN button (62, 63)
• PROGRESSIVE button (14)
; TV VOL (volume) + and – buttons (62, 63)
a VOLUME + and – buttons (11, 16)
s Menu operation buttons
• TOP MENU button (33)
• MENU button (33)
• RETURN button (33)
• ENTER button
• Cursor 5/∞/3/2 buttons
HOME THEATER
DVD-AUDIO/VIDEO RECEIVER
1
2
STANDBY/ON
DBS
VCR
TV
AUDIO
TV
TAPE
CDR
FM/AM
DBS
VCR
DVD
3
4
5
6
7
8
9
REPEAT
SLEEP
FM MODE
i
CENTER
CONTROL EFFECT
1
ANALOG
/DIGITAL
TEST
INPUT
4
2
7
10/0
3
REAR·L
5
6
o
REAR·R
AUDIO SURR ON/OFF
SUBTITLE SURR MODE
e
r
t
STROBE
– TV/DBS CH +
p
q
w
9/FF
TV/VIDEO REW/( TUNING/GROUP
8
9
– SUBWOOFER +
VFP
+10
100+
TV RETURN
PROGRESSIVE
DIMMER
ANGLE
+
+
PAGE
MUTING TV VOL
ZOOM
–
–
DIGEST TOP MENU
+
VOLUME
MENU
s
ENTER
ON SCREEN
a
–
CHOICE
y
;
RETURN
u
REMOTE CONTROL RM-SRXDV5J
When you press one of the following buttons, the remote control operation mode appears on the operation
mode display for about two hours.
Ex. : When you press FM/AM
This mark appears while
the remote control is
transmitting the signal to
the unit.
Button
Operation mode
TV
TAPE
CDR
FM/AM
DBS
VCR
DVD
TV
TAPE
CDR
TUNER
DBS
VCR
DVD
Button
Operation mode
Each time you press the button, the
operation mode changes as follows:
CONTROL
3
EN01_10RX-DV5SL[C]4.pm5
3
02.8.5, 5:33 PM
Before Installation
General Precautions
• DO NOT insert any metal object into the unit.
• DO NOT disassemble the unit or remove screws, covers, or
cabinet.
• DO NOT expose the unit to rain or moisture.
English
Getting Started
Putting Batteries in the Remote Control
Before using the remote control, put two supplied batteries first.
• When using the remote control, aim the remote control directly at
the remote sensor on the unit.
1 On the back of the remote control, remove the
battery cover.
Locations
• Install the unit in a location that is level and protected from
moisture.
• The temperature around the unit must be between 5˚C and 35˚C
(41˚F and 95˚F).
• Make sure there is good ventilation around the unit. Poor
ventilation could cause overheating and damage the unit.
Handling the unit
• DO NOT touch the power cord with wet hands.
• DO NOT pull on the power cord to unplug it. When unplugging
the cord, always grasp the plug so as not to damage the cord.
• Keep the power cord away from the connecting cords and the
antenna. The power cord may cause noise or screen interference. It
is recommended to use a coaxial cable for antenna connection,
since it is well-shielded against interference.
• When a power failure occurs, or when you unplug the power cord,
the preset settings such as preset FM or AM channels and sound
adjustments may be erased in a few days.
2 Insert batteries. Make sure to match the polarity:
(+) to (+) and (–) to (–).
Checking the Supplied Accessories
Check to be sure you have all of the following supplied accessories.
The number in the parentheses indicates the quantity of the pieces
supplied.
3 Replace the cover.
• Remote Control (1)
• Batteries (2)
• AM Loop Antenna (1)
• FM Antenna (1)
• Composite Video Cord (1)
If anything is missing, contact your dealer immediately.
If the range or effectiveness of the remote control decreases, replace
the batteries. Use two R6P(SUM-3)/AA(15F) type dry-cell batteries.
CAUTION:
Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity:
(+) to (+) and (–) to (–).
• Use the correct type of batteries. Batteries that look similar may
differ in voltage.
• Always replace both batteries at the same time.
• Do not expose batteries to heat or flame.
4
EN01_10RX-DV5SL[C]4.pm5
4
02.8.5, 5:33 PM
English
Getting Started
Connecting the FM and AM Antennas
If AM reception is poor,
connect an outdoor
single vinyl-covered wire
(not supplied).
AM loop antenna
(supplied)
If FM reception is poor, connect
outdoor FM antenna (not supplied).
B
75
FMAXIAL
CO
75
FMAXIAL
CO
AM LOOP
FM antenna (supplied)
Snap the tabs on the loop into
the slots of the base to
assemble the AM loop antenna.
1
2
FM 75
AM EXT
COAXIAL
ANTENNA
1
3
FRONT
SPEAKERS
RIGHT
LEFT
RIGHT
CENTER
SPEAKER
LEFT
DIGITAL IN
REAR
SPEAKERS
SUBWOOFER
OUT
DIGITAL 1
(DBS)
DIGITAL OUT
DIGITAL 2
(TV)
PCM/STREAM
DBS
IN
CAUTION:
SPEAKER
IMPEDANCE
8 16
2
OUT
(REC)
VCR
IN
(PLAY)
MONITOR
OUT
DBS
IN
OUT
(REC)
VCR
IN
(PLAY)
MONITOR
OUT
AUDIO
TV
TAPE / CDR
DBS
VCR
S-VIDEO
LEFT
AM LOOP
VIDEO
RIGHT
AV COMPU LINK-
IN
OUT
(REC)
IN
(PLAY)
IN
OUT
(REC)
IN
(PLAY)
Y
PB
PR
DVD COMPONENT VIDEO OUT
AM EXT
FM 75
COAXIAL
ANTENNA
Rear panel of the unit
AM antenna connection
FM antenna connection
Connect the AM loop antenna supplied to the AM LOOP
terminals.
Connect the FM antenna supplied to the FM 75 Ω COAXIAL
terminal as temporary measure.
Extend the supplied FM antenna horizontally.
• If the reception is poor, connect an outdoor FM antenna (not
supplied). Before attaching a 75 Ω antenna with a coaxial type
connector, disconnect the supplied FM antenna.
1 Remove the insulation if the AM loop antenna
wire is covered with vinyl.
2 Press and hold the clamp of the terminal (1),
then insert the wire (2).
3 Release the clamp.
Turn the loop until you have the best reception.
• If the reception is poor, connect an outdoor single vinylcovered wire (not supplied) to the AM EXT terminal. Keep the
AM loop antenna connected.
Note:
• Make sure the antenna conductors do not touch any other
terminals, connecting cords and power cord. This could cause poor
reception.
5
EN01_10RX-DV5SL[C]4.pm5
5
02.8.5, 5:33 PM
Connecting the Speakers
English
Getting Started
Connecting the subwoofer speaker
After connecting the front, center and rear speakers, and/or a
subwoofer, set the speaker setting information properly to obtain the
best possible Surround effect. For details, see page 20.
By connecting a subwoofer, you can enhance the bass or reproduce
the original LFE signals recorded in the digital software.
RIGHT
FRONT
SPEAKERS
LEFT
CENTER
SPEAKER
RIGHT
LEFT
REAR
SPEAKERS
SUBWOOFER
OUT
CAUTIONS:
• Use speakers with the SPEAKER IMPEDANCE indicated by the
speaker terminals (8 – 16 Ω).
• DO NOT connect more than one speaker to one speaker terminal.
CAUTION:
SPEAKER
IMPEDANCE
8 16
Powered subwoofer
(example)
Connecting the front, center, and rear speakers
2
1
3
1
2
Connect the input jack of a powered subwoofer to the SUBWOOFER OUT jack on the rear panel, using a cable with RCA pin
plugs (not supplied).
• Refer also to the manual supplied with your subwoofer.
For each speaker, connect the (+) and (–) terminals on the rear panel
to the (+) and (–) terminals marked on the speakers respectively.
1 Cut, twist and remove the insulation at the end of
each speaker cord (not supplied).
Note:
• You can place a subwoofer wherever you like since bass sound is
non-directional. Normally place it in front of you.
Speaker Layout Diagram
2 Press and hold the clamp of the speaker terminal
(1), then insert the speaker cord (2).
Center speaker
Subwoofer
3 Release the clamp.
RIGHT
FRONT
SPEAKERS
LEFT
RIGHT
CENTER
SPEAKER
LEFT
REAR
SPEAKERS
CAUTION:
SPEAKER
IMPEDANCE
8 16
SUBWOOFER
OUT
Left front
speaker
Right front
speaker
Left rear
speaker
Right rear
speaker
To left rear
speaker
To right front
speaker
To right rear
speaker
To left front speaker
To center speaker
FRONT
SPEAKERS
RIGHT
LEFT
CENTER
SPEAKER
RIGHT
LEFT
DIGITAL IN
REAR
SPEAKERS
SUBWOOFER
OUT
DIGITAL 1
(DBS)
DIGITAL OUT
DIGITAL 2
(TV)
PCM/STREAM
DBS
IN
CAUTION:
SPEAKER
IMPEDANCE
8 16
OUT
(REC)
VCR
IN
(PLAY)
MONITOR
OUT
DBS
IN
OUT
(REC)
VCR
IN
(PLAY)
MONITOR
OUT
AUDIO
TV
TAPE / CDR
DBS
VCR
S-VIDEO
LEFT
AM LOOP
VIDEO
To obtain the best possible sound from this system, place all the
speakers except the subwoofer at the same distance from the
listening position with each speaker’s front faced toward the
listener.
Then, change the subwoofer and speaker settings to fit your
listening conditions (see page 20).
RIGHT
AV COMPU LINK-
IN
OUT
(REC)
IN
(PLAY)
IN
OUT
(REC)
IN
(PLAY)
Y
PB
PR
DVD COMPONENT VIDEO OUT
AM EXT
FM 75
COAXIAL
ANTENNA
6
EN01_10RX-DV5SL[C]4.pm5
6
02.8.5, 5:33 PM
English
Getting Started
Connecting Audio/Video Components
TV connection
Turn off all the components and the unit before connection.
■ About connecting cords
For video connections
The S-video cords and the component video cord are not supplied with this unit.
Use the cords supplied with the other components or purchase them at your dealer.
A
• You can use composite video cord ( A ) and/or S-video cord
( B ) for connecting DBS tuner and VCR to this unit.
Composite video cord (supplied)
Yellow
B
C
• You can use component video cord ( C ) in addition to A and
B for connecting your TV to this unit.
• By using B or C , you can get a better picture quality—in the
order: A < B < C .
S-video cord (not supplied)
• To view the picture from DBS tuner or VCR on your TV, connect
your TV to this unit using the same type of cord for connecting
DBS tuner or VCR to this unit.
Component video cord (not supplied)
Green
Blue
Red
• To view the picture from the built-in DVD player, connect the TV
to this unit using A , B , and/or C , then register the video
output mode correctly (see “Video output mode” on page 22).
• To enjoy the progressive video picture, connect the TV
compatible with the progressive video input using C , then
change the scanning mode correctly (see “Changing the
Scanning Mode” on page 14).
For audio connections
Connect the external components to this unit with the audio cords.
Use the cord supplied with the other components or purchase them at your dealer.
A
Digital coaxial cord (not supplied)
B
Optical digital cord (not supplied)
C
Audio cord (not supplied)
• When the unit is shipped from the factory, the DIGITAL IN
terminals are set for use with the following components:
– DIGITAL 1 (coaxial): For DBS tuner
– DIGITAL 2 (optical): For TV
• If you connect CDR, change the digital input (DIGITAL IN)
terminal setting (see “Digital input (DIGITAL IN) terminals” on
page 21) and the source name (see “Changing the Source
Name” on page 12) correctly.
• Select the digital input mode correctly (see “Selecting the
Analog or Digital Input Mode” on page 13).
White
Red
7
EN01_10RX-DV5SL[C]4.pm5
7
02.8.5, 5:33 PM
Turn off all the components and the unit before connection.
■ TV connection
Video connections
English
Getting Started
Illustrations of the input/output terminals below are typical
examples. When you connect other components, refer also to
their manuals since the terminal names actually printed on
their rear vary among the components.
DO NOT connect a TV through a VCR or a TV with a built-in
VCR; Otherwise, the picture may be distorted.
A
DBS
IN
OUT
(REC)
VCR
IN
(PLAY)
MONITOR
OUT
DBS
IN
OUT
(REC)
VCR
MONITOR
OUT
IN
(PLAY)
S-VIDEO
B
VIDEO
VIDEO IN
RIGHT
FRONT
SPEAKERS
LEFT
RIGHT
CENTER
SPEAKER
LEFT
DIGITAL IN
REAR
SPEAKERS
SUBWOOFER
OUT
DIGITAL 1
(DBS)
DIGITAL OUT
DIGITAL 2
(TV)
PCM/STREAM
DBS
IN
OUT
(REC)
VCR
MONITOR
OUT
IN
(PLAY)
DBS
IN
OUT
(REC)
VCR
IN
(PLAY)
MONITOR
OUT
AUDIO
CAUTION:
SPEAKER
IMPEDANCE
8 16
TV
TAPE / CDR
DBS
VCR
S-VIDEO
LEFT
VIDEO
AM LOOP
RIGHT
IN
AV COMPU LINK-
OUT
(REC)
IN
(PLAY)
IN
OUT
(REC)
IN
(PLAY)
Y
PB
PR
DVD COMPONENT VIDEO OUT
FM 75
COAXIAL
AM EXT
ANTENNA
Green
Blue
C
Green
Blue
Red
Red
PR
Y
PB
PR
DVD COMPONENT VIDEO OUT
PB
Y
COMPONENT VIDEO IN
Audio connections
B
DIGITAL
OPTICAL OUT
DIGITAL IN
Before connecting an
optical digital cord,
unplug the protective
plug.
FRONT
SPEAKERS
RIGHT
LEFT
DIGITAL 1
(DBS)
RIGHT
CENTER
SPEAKER
LEFT
DIGITAL 2
(TV)
DIGITAL IN
REAR
SPEAKERS
SUBWOOFER
OUT
DIGITAL 1
(DBS)
DIGITAL OUT
DIGITAL 2
(TV)
PCM/STREAM
DBS
IN
CAUTION:
SPEAKER
IMPEDANCE
8 16
OUT
(REC)
VCR
IN
(PLAY)
MONITOR
OUT
DBS
IN
OUT
(REC)
VCR
IN
(PLAY)
MONITOR
OUT
AUDIO
TV
TAPE / CDR
DBS
VCR
S-VIDEO
LEFT
AM LOOP
VIDEO
RIGHT
IN
AV COMPU LINK-
OUT
(REC)
IN
(PLAY)
IN
OUT
(REC)
IN
(PLAY)
Y
PB
PR
DVD COMPONENT VIDEO OUT
FM 75
COAXIAL
AM EXT
ANTENNA
AUDIO
TV
TAPE / CDR
DBS
VCR
White
C
White
LEFT
LEFT
RIGHT
RIGHT
IN
OUT
(REC)
IN
(PLAY)
IN
OUT
(REC)
IN
(PLAY)
Red
Red
OUT
AUDIO
8
EN01_10RX-DV5SL[C]4.pm5
8
02.8.5, 5:33 PM
English
Getting Started
Illustrations of the input/output terminals below are typical examples.
When you connect other components, refer also to their manuals since the
terminal names actually printed on their rear vary among the components.
Turn off the TV and the unit before connection.
■ VCR connection
B
DBS
IN
VCR
OUT
(REC)
MONITOR
OUT
IN
(PLAY)
DBS
IN
VCR
OUT
(REC)
MONITOR
OUT
IN
(PLAY)
A
S-VIDEO
VIDEO
IN
OUT
IN
VIDEO
OUT
S-VIDEO
B
RIGHT
FRONT
SPEAKERS
LEFT
CENTER
SPEAKER
RIGHT
LEFT
DIGITAL IN
REAR
SPEAKERS
SUBWOOFER
OUT
DIGITAL 1
(DBS)
DIGITAL OUT
DIGITAL 2
(TV)
PCM/STREAM
DBS
IN
VCR
OUT
(REC)
MONITOR
OUT
IN
(PLAY)
DBS
IN
VCR
OUT
(REC)
MONITOR
OUT
IN
(PLAY)
AUDIO
CAUTION:
SPEAKER
IMPEDANCE
8 16
TV
TAPE / CDR
DBS
VCR
S-VIDEO
LEFT
VIDEO
AM LOOP
RIGHT
IN
AV COMPU LINK-
OUT
(REC)
IN
(PLAY)
IN
OUT
(REC)
Y
PB
PR
DVD COMPONENT VIDEO OUT
IN
(PLAY)
FM 75
COAXIAL
AM EXT
ANTENNA
VCR
AUDIO
TV
TAPE / CDR
DBS
C
VCR
LEFT
LEFT
White
White
Red
Red
RIGHT
RIGHT
IN
OUT
(REC)
IN
(PLAY)
IN
OUT
(REC)
IN
(PLAY)
OUT
IN
AUDIO
C
Red
Red
White
White
■ DBS tuner connection
DBS
IN
OUT
(REC)
VCR
IN
(PLAY)
MONITOR
OUT
DBS
IN
OUT
(REC)
VCR
S-VIDEO
FRONT
SPEAKERS
RIGHT
LEFT
A
MONITOR
OUT
IN
(PLAY)
VIDEO
RIGHT
CENTER
SPEAKER
LEFT
DIGITAL IN
REAR
SPEAKERS
SUBWOOFER
OUT
DIGITAL 1
(DBS)
OUT
OUT
VIDEO
S-VIDEO
B
DIGITAL OUT
DBS tuner
DIGITAL 2
(TV)
PCM/STREAM
DBS
IN
CAUTION:
SPEAKER
IMPEDANCE
8 16
OUT
(REC)
VCR
IN
(PLAY)
MONITOR
OUT
DBS
IN
OUT
(REC)
VCR
IN
(PLAY)
MONITOR
OUT
AUDIO
TV
TAPE / CDR
DBS
VCR
S-VIDEO
LEFT
AM LOOP
VIDEO
RIGHT
IN
AV COMPU LINK-
OUT
(REC)
IN
(PLAY)
IN
OUT
(REC)
IN
(PLAY)
Y
PB
PR
DVD COMPONENT VIDEO OUT
FM 75
COAXIAL
AM EXT
ANTENNA
AUDIO
TV
TAPE / CDR
DBS
VCR
C
LEFT
LEFT
White
White
Red
Red
RIGHT
RIGHT
IN
OUT
(REC)
IN
(PLAY)
IN
OUT
(REC)
IN
(PLAY)
OUT
AUDIO
9
EN01_10RX-DV5SL[C]4.pm5
9
02.8.5, 5:33 PM
English
Getting Started
■ Cassette deck/CD recorder connection
FRONT
SPEAKERS
RIGHT
LEFT
RIGHT
CENTER
SPEAKER
LEFT
DIGITAL IN
REAR
SPEAKERS
SUBWOOFER
OUT
DIGITAL 1
(DBS)
Cassette deck
DIGITAL OUT
DIGITAL 2
(TV)
PCM/STREAM
DBS
IN
OUT
(REC)
VCR
IN
(PLAY)
MONITOR
OUT
DBS
IN
OUT
(REC)
VCR
IN
(PLAY)
MONITOR
OUT
AUDIO
CAUTION:
SPEAKER
IMPEDANCE
8 16
TV
TAPE / CDR
DBS
VCR
S-VIDEO
LEFT
VIDEO
AM LOOP
RIGHT
IN
AV COMPU LINK-
OUT
(REC)
IN
(PLAY)
IN
OUT
(REC)
IN
(PLAY)
Y
PB
PR
DVD COMPONENT VIDEO OUT
FM 75
COAXIAL
AM EXT
ANTENNA
AUDIO
TV
TAPE / CDR
DBS
C
VCR
LEFT
LEFT
White
White
Red
Red
RIGHT
RIGHT
IN
OUT
(REC)
IN
(PLAY)
IN
OUT
(REC)
IN
(PLAY)
OUT
IN
AUDIO
C
Red
Red
White
White
CD recorder
■ Digital connection
DBS tuner
B
DIGITAL
OUT
A
DIGITAL
OUT
DIGITAL IN
DIGITAL 1
(DBS)
LEFT
DIGITAL 2
(TV)
DIGITAL IN
REAR
SPEAKERS
SUBWOOFER
OUT
DIGITAL 1
(DBS)
DIGITAL OUT
PCM/STREAM
DBS
IN
OUT
(REC)
VCR
IN
(PLAY)
MONITOR
OUT
DBS
IN
OUT
(REC)
VCR
IN
(PLAY)
MONITOR
OUT
AUDIO
/ CDR
DBS
VCR
S-VIDEO
IN
(PLAY)
IN
OUT
(REC)
IN
(PLAY)
Y
PB
PR
DVD COMPONENT VIDEO OUT
CD recorder
DIGITAL 2
(TV)
VIDEO
AM LOOP
AM EXT
Before connecting an optical
digital cord, unplug the
protective plug.
FM 75
COAXIAL
ANTENNA
CD recorder
DIGITAL
IN
B
DIGITAL OUT
PCM/STREAM
Now, you can plug the power cord of the unit into the AC outlet.
CAUTIONS:
Notes:
• Do not touch the power cord with wet hands.
• Do not pull on the power cord to unplug the cord. When unplugging
the cord, always grasp the plug so as not to damage the cord.
• Keep the power cord away from the connecting cords and the
antenna cables. The power cord may cause noise or screen
interference.
• The preset settings such as preset channels and sound adjustment
may be erased in a few days in the following cases:
– When you unplug the power cord.
– When a power failure occurs.
10
EN01_10RX-DV5SL[C]4.pm5
10
02.8.5, 5:33 PM
English
Basic Operations
1 Turn On the Power
Notes:
STANDBY/ON
STANDBY
DBS
VCR
TV
AUDIO
STANDBY/ON
On the front panel
From the remote control
STANDBY/ON on the front panel or
Press
STANDBY/ON AUDIO on the remote control.
The STANDBY lamp goes off and the illumination lamp lights up.
The current source name appears on the display.
• If the built-in DVD player is the current source, “READING”
appears while the unit is detecting the type of the loaded disc
(see page 29).
– Playback starts automatically when you load some DVD
VIDEO.
– “NO DISC” appears on the display when no disc is loaded.
To turn off the power (into standby)
Press
STANDBY/ON on the front panel or
STANDBY/ON AUDIO on the remote control again.
The illumination lamp goes off and the
STANDBY lamp lights up.
STANDBY
STANDBY/ON
Note:
• A small amount of the power is consumed even in standby mode.
To turn off the power completely, unplug the AC power cord.
DBS
VCR
TV
3 Adjust the Volume
On the front panel:
To increase the volume,
MASTER VOLUME
turn MASTER VOLUME clockwise.
To decrease the volume,
turn MASTER VOLUME counterclockwise.
From the remote control:
To increase the volume,
press and hold VOLUME +.
To decrease the volume,
press and hold VOLUME –.
+
VOLUME
–
CAUTION:
Always set the volume to the minimum before starting any sources. If
the volume is set at a high level, the sudden blast of sound energy
can permanently damage your hearing and/or ruin your speakers.
Notes:
2 Select the Source to Play
DVD
* Register the digital input terminal setting (see “Digital input
(DIGITAL IN) terminals” on page 21) and digital input mode setting
correctly (see “Selecting the Analog or Digital Input Mode” on page
13). Source name and “DIGITAL” will be shown on the display when
you select the source.
** When the source name is not assigned correctly, these buttons
cannot work (see “Changing the Source Name” on page 12).
TAPE/CDR
FM/AM
SOURCE NAME
• The volume level can be adjusted within the range of “0” (minimum)
to “50” (maximum).
• When DVD is selected as the source with your TV turned on, the
volume level indication appears on the TV.
On the front panel
Listening with headphones
TV
TAPE
CDR
FM/AM
DBS
VCR
DVD
From the remote control
Press one of the source selecting buttons.
DVD
DBS*
VCR
TV*
TAPE/CDR*
TAPE
CDR*
FM/AM
: Select the built-in DVD player.
: Select the DBS tuner.
: Select the VCR.
: Select the TV tuner.
: Select the cassette deck or the CD recorder (front
panel ONLY).
: Select the cassette deck (remote control ONLY**).
: Select the CD recorder (remote control ONLY**).
: Select an FM or AM broadcast.
When you press one of the buttons listed above, the remote control
operation mode appears on the operation mode display for about 2
hours.
DVD AUDIO/VIDEO RECEIVER
Ex. : When you press DVD
Connect a pair of headphones to the (phones) jack on the
front panel. This cancels the Surround mode currently
selected, deactivates speakers, and activates the
HEADPHONE mode.
The SPK. indicator goes off from the display.
• Disconnecting a pair of headphones from the (phones) jack
cancels the HEADPHONE mode and activates speakers.
HEADPHONE mode
When using the headphones, the following signals are output
regardless of your speaker setting:
— For 2-channel sources, the front left and right channel signals
are output directly from the left and right headphones.
— For multichannel sources, the front left and right, center and
rear channel signals are down-mixed and then output from the
headphones without missing bass element.
— For DVD AUDIO ONLY: When the multichannel track
cannot be down-mixed, only signals of the front left and right
channel are output.
CAUTION:
Be sure to turn down the volume:
• Before connecting or putting on headphones, as high volume can
damage both the headphones and your hearing.
• Before removing headphones, as high volume may output from the
speakers.
11
EN11-14RX-DV5SL[C]4.pm5
11
02.8.5, 5:33 PM
Turning Off the Sounds Temporarily
English
Basic Operations
Changing the Display Brightness
MUTING
DIMMER
From the remote control ONLY
From the remote control ONLY
Press MUTING to mute the sound.
“MUTING” appears on the display and the volume turns off (the
VOLUME indication goes off).
• When DVD is selected as the source with your TV turned on,
“VOLUME –” appears on the TV.
Press DIMMER to dim the display.
• Each time you press the button, the display and
illumination lamp dim and brighten alternately.
DIGITAL AUTO
L
Changing the Source Name
SPK.
R
To restore the sound
Press MUTING again.
• Pressing VOLUME + or – on the remote control (or turn
MASTER VOLUME on the front panel) also restores the sound.
Turning Off the Power
with the Sleep Timer
When you connect an CD recorder to the TAPE/CDR jacks on the
rear panel, change the source name which will be shown on the
display.
TAPE/CDR
SOURCE NAME
On the front panel ONLY
Ex. : When changing the source name from “TAPE” to “CDR”
SLEEP
1
Press TAPE/CDR (SOURCE NAME) to select as
the source.
2
Press and hold SOURCE NAME (TAPE/CDR)
until “ASSGN. CDR” appears on the display.
From the remote control ONLY
Press SLEEP repeatedly.
The SLEEP indicator lights up on the display.
• Each time you press the button, the shut-off time changes as
follows:
SLEEP indicator
ANALOG
L
R
VOLUME
DIGITAL AUTO
L
SPK.
R
10
0 (off)
SLEEP
20
30
60
150
120
90
ASSGN. TAPE
VOLUME
ASSGN. CDR
To change the source name to “TAPE”
Press and hold SOURCE NAME (TAPE/CDR) until “ASSGN.
TAPE” appears on the display in step 2.
Note:
When the shut-off time comes
The unit is turned off automatically.
To check or change the remaining time until the shut-off time
Press SLEEP once.
The remaining time (in minutes) until the shut-off time appears.
• To change the shut-off time, press SLEEP repeatedly.
• Without changing the source name, you can still use the connected
components. However, there may be some inconveniences:
– The unexpected source name will appear on the display when
you press TAPE/CDR (SOURCE NAME) on the front panel.
– The CDR or TAPE button on the remote control cannot work for
selecting the source.
– You cannot use the digital input (see page 10) for the CD
recorder.
To cancel the Sleep Timer
Press SLEEP repeatedly until “SLEEP 0” appears on the display.
(The SLEEP indicator goes off.)
• Turning off the unit also cancels the Sleep Timer.
Note:
• If Auto Standby (see page 54) and Sleep Timer are used at a time,
one with the early shut-off time will turn off the unit.
12
EN11-14RX-DV5SL[C]4.pm5
12
02.8.5, 5:33 PM
English
Basic Operations
Selecting the Analog or Digital Input Mode
When you have connected digital source components using both the
analog connection and the digital connection methods (see pages 7 to
10), you can select the input mode.
• Before selecting the digital input mode, register the digital input
terminal setting correctly (see “Digital input (DIGITAL IN)
terminals” on page 21).
1
Press one of the source selecting buttons (DBS,
TV, or CDR) for which you want to change the
input mode.
DVD
DBS
VCR
TV
TAPE/CDR
FM/AM
SOURCE NAME
On the front panel
TV
TAPE
CDR
FM/AM
DBS
VCR
DVD
Changing the Digital Input Mode Manually
If the following symptoms occur while Dolby Digital or DTS
Digital Surround software is played back, you can change the digital
input mode:
• Sound does not come out at the beginning of playback.
• Noise comes out while searching for or skipping chapters or
tracks.
CONTROL
On the front panel
Press CONTROL 3 (or 2) to select “DGTL D.D.”
or “DGTL DTS” while “DGTL AUTO” still remains
on the display.
• Each time you press the button, the digital input mode changes as
follows:
DIGITAL AUTO
L
R
VOLUME
From the remote control
DGTL AUTO
Note:
• You cannot change the input mode when selecting DVD as the
source. Digital input is always used for the built-in DVD player.
2
Press INPUT ANALOG/DIGITAL (INPUT ATT.)
on the front panel or ANALOG/DIGITAL INPUT
on the remote control.
INPUT
ANALOG/DIGITAL
ANALOG
/DIGITAL
INPUT
INPUT ATT.
On the front panel
DGTL DTS
DGTL AUTO : Normally select this.
The DIGITAL AUTO indicator lights up.
The unit automatically detects the incoming
signal format, then the sound signal indicator
for the detected signal lights up.
DGTL D.D.
: Select this for playing back software encoded
with Dolby Digital.
The
DIGITAL indicator lights up*.
DGTL DTS
: Select this for playing back software encoded
with DTS Digital Surround.
The
indicator lights up*.
From the remote control
The current input mode appears on the display.
• Each time you press the button, the input mode alternates
between the analog input (“ANALOG”*) and the digital input
(“DGTL AUTO”).
ANALOG/DIGITAL AUTO indicator
DGTL D.D.
* These indicators flash when no signal or the signal without the
proper format is played back.
ANALOG DIGITAL AUTO
L
R
SPK.
DGTL AUTO
VOLUME
ANALOG
* “ANALOG” is the initial setting except for the built-in DVD
player.
DGTL AUTO : Select this for the digital input mode.
The DIGITAL AUTO indicator lights up.
The unit automatically detects the incoming
signal format, then the sound signal indicator
for the detected signal—
DIGITAL or
lights up; otherwise, no sound signal indicators
light up.
ANALOG
When DVD is selected as the source, you can also
change the digital input mode by pressing
ANALOG/DIGITAL INPUT repeatedly on the remote
control.
• When “DGTL AUTO” cannot recognize the incoming signals, no
sound signal indicators light up on the display.
• When you turn off the unit or select another source, “DGTL DTS”
and “DGTL D.D.” are canceled.
The digital input mode is automatically reset to “DGTL AUTO.”
: Select this for the analog input mode.
The ANALOG indicator lights up.
13
INPUT
Notes:
13
EN11-14RX-DV5SL[C]4.pm5
ANALOG
/DIGITAL
02.8.5, 5:33 PM
Attenuating the Input Signal
Notes:
When the input level of the analog source is too high, the sounds
will be distorted. If this happens, you need to attenuate the input
signal level to prevent the sound distortion.
• You have to make this adjustment for each analog source.
INPUT
ANALOG/DIGITAL
On the front panel ONLY
English
Basic Operations
INPUT ATT.
Press and hold INPUT ATT. (INPUT ANALOG/
DIGITAL) until the INPUT ATT indicator lights up
on the display.
• Each time you press and hold the button, the Input Attenuator
turns on (“ATT ON”) or off (“ATT NORMAL”*).
• Some progressive TVs and High-Definition TVs are not fully
compatible with this system. When the unnatural picture is played
back, change the scanning mode to “INTERLACE.” To check the
compatibility of your TV, contact your dealer.
All JVC progressive TVs and High-Definition TVs are fully
compatible with this system respectively.
• When you select “PROGRESSIVE” as the scanning mode, the
picture does not come out correctly through composite video and
S-video jacks.
* 480p and 480i indicate the number of scanning lines and scanning
format of an image signal.
– 480p indicates 480 scanning lines with progressive format.
– 480i indicates 480 scanning lines with interlaced format.
Activating the Recording Mode
INPUT ATT indicator
ANALOG
INPUT ATT
L
R
VOLUME
ATT NORMAL
ATT ON
* “ATT NORMAL” is the initial setting.
ATT NORMAL : Normally select this. The analog sound is not
attenuated.
ATT ON
: Select this when the analog sound is
distorted.
Changing the Scanning Mode
This unit supports the progressive scanning system (480p*) as well
as the conventional interlaced scanning system (480i*).
If your TV has component video jacks and supports the progressive
video input, you can enjoy a high quality picture from the built-in
DVD player.
• Refer also to the instruction manuals supplied with your TV.
• You can select the progressive mode according to the original
picture type (film or video source). See page 51.
• Do not change the scanning mode to “PROGRESSIVE” in the
following cases:
– When your TV does not support the progressive video input.
– When you do not connect your TV to the unit using component
video cord.
From the remote control ONLY
VFP
SURROUND
ON/OFF
MODE
On the front panel ONLY
REC MODE
Press and hold REC MODE (SURROUND MODE)
until “RECMODE ON” appears on the display.
• Each time you press and hold the button, Recording mode is
activated (“RECMODE ON”) and deactivated
(“RECMODE OFF”*) alternately.
* “RECMODE OFF” is the initial setting.
RECMODE OFF : Normally select this. The down-mixing is
canceled.
RECMODE ON : Select this for recording the down-mixed
sounds.
When recording with VCR:
You can record the picture on your video tape without the volume
level indication when Recording mode is activated.
• When you do not want to record the on-screen guide icons, see
page 54.
• The choice menu and on-screen bar are always recorded when
they appear on the TV.
CAUTION:
TV RETURN
PROGRESSIVE
Press and hold PROGRESSIVE for more than 3
seconds when DVD is selected as the source.
The current scanning mode appears on the display for a while.
• Each time you press and hold the button, the scanning mode
changes “INTERLACE”* and “PROGRESSIVE” alternately.
* “INTERLACE” is the initial setting.
INTERLACE
When you play back the multichannel sources, Recording mode
enables you to record the sounds without missing surround elements
by down-mixing the center and rear channel signals into the front
channel signals.
• For DVD AUDIO ONLY: When the multichannel track cannot be
down-mixed, this function does not take effect.
• When the multichannel software is played back with Recording
mode activated, the sounds are down-mixed and come out through
the front speakers only.
: Select this for conventional TV.
PROGRESSIVE : Select this if your TV with component
jacks supports the progressive video input.
The PROGRESSIVE indicator lights up.
When the front speakers are small, the output sound may be distorted
by Recording mode. In this case, decrease the volume until the sound
distortion diminishes.
Notes:
• When you turn off the unit or select another source, Recording
mode is canceled (“RECMODE OFF”).
• Sound adjustments (see pages 23 and 24) and Surround modes
(see pages 25 to 28) do not affect the recording.
• The following buttons do not work while Recording mode is
activated (“RECMODE ON”):
– SETTING and ADJUST on the front panel
– SURROUND ON/OFF and SURROUND MODE on the front
panel
– Number buttons for adjusting sound on the remote control
14
EN11-14RX-DV5SL[C]4.pm5
14
02.8.5, 5:33 PM
English
Basic DVD Player Operations
For details about DVD player operations, see pages 29 to
44.
• You can also play back MP3 and JPEG files. See pages 45
to 48.
DVD AUDIO/VIDEO RECEIVER
• When using remote
control, press DVD to
change the remote control
operation mode to the
DVD player operation.
By pressing the following buttons, you can pause, advance, or reverse
playback, and locate the beginning of the title, chapter, or track.
On the front panel
9/FF
REW/( TUNING/GROUP
From the remote control
FM MODE
STROBE
– TV/DBS CH +
To stop playback temporarily
Press 8.
• Pressing 3 starts playback again.
1 Open the Disc Tray
Before turning on the unit, turn on your TV and select the correct
video input (see the manual supplied with your TV).
• When you use a JVC’s TV, you can turn on your TV by pressing
STANDBY/ON TV on the remote control and select the
video input by pressing TV/VIDEO. (If your TV is not a JVC’s,
see “Operating Other Manufacturers’ Equipment” on page 63.)
• For changing the OSD messages—the information on the TV
—into the desired language, see pages 49 and 51.
On the front panel ONLY
Press 0.
The unit is turned on and the disc tray opens.
The STANDBY lamp goes off and the illumination lamp lights up.
• When a disc is already loaded, pressing 3 turns on the unit and
starts playing back the loaded disc.
2 Load a Disc
Place a disc correctly with its label side up.
To move back the playback position by 10 seconds
(for DVD VIDEO only)
Press 3 during DVD VIDEO playback.
The unit moves the playback position about 10 seconds before the
current position, then resumes playback.
To advance or reverse playback rapidly
Press and hold ¢ or 4.
While you are pressing and holding ¢ (or 4), the unit advances
(or reverses: except for VCD and SVCD) playback 5 times as fast as
the normal speed. When you press and hold ¢ (or 4) further,
the playback speed changes up to 20 times as fast as the normal
speed.
• Releasing the button resumes the normal playback.
To locate the beginning of the chapter or track
Press ¢ or 4.
Press ¢ (or 4) to locate the beginning of the next (current or
previous) chapter or track.
To locate the chapter or track using the number buttons
Press the number buttons (1 – 10, +10) to select the number of the
desired chapter or track.
CENTER
EFFECT
Ex. : To select 3, press 3.
1
2
3
To select 11, press +10, then 1.
TEST
REAR·L
4
5
6
To select 20, press +10, then 10.
REAR·R
SURR ON/OFF
RX
DV
-D V
5
H
DB
E
OM
TH
EA
TE
VC
V
R D
U
D -A
D IO
TV
/V ID
EO
RE
TAPE
SO
UR
CE
IV E
R
FM
7
/AM
/CDR
CE
NA
ME
From the remote control ONLY
R
S
SURR MODE
10/0
8
9
– SUBWOOFER +
+10
100+
D
CORRECT
ND
OU MODE
RR
SU
Y
DB
STAN
/OFF
UT TAL
/DIGI
ON
INP
N
Y/O
ALOG
DB
STAN
DIO
AN
D AU
DV
T.
T AT
INPU
About indication on the display while playing back a disc
L
T A
G I
D I
SU
RR
OU
ND
INCORRECT
While you are playing back a disc, the playback information
appears on the display as follows:
Ex. : When DVD VIDEO is loaded
3 Start Playback
DIGITAL AUTO
AUTO SURROUND
DIGITAL L C R
SPK.
LS
RS
Chapter number
On the front panel
VOLUME
SUBWFR LFE
TUNING/GROUP
From the remote control
Press 3.
Ex. : When audio CD is loaded
DIGITAL AUTO
L
The disc tray closes and the unit starts playing back the loaded disc.
• You can also close the disc tray by pressing 0 on the front panel.
Elapsed playing time
PRO LOGIC
R
SPK.
Track number
15
EN15-18RX-DV5SL[C]4.pm5
15
VOLUME
SUBWFR
02.8.5, 5:33 PM
Elapsed playing time
4 Adjust the Volume
English
Basic DVD Player Operations
7 Stop Playback
FM MODE
MASTER VOLUME
+
VOLUME
–
On the front panel
From the remote control
Press 7.
On the front panel
Playback stops.
The unit memorizes the point where you stop playback and the
RESUME indicator lights up on the display (except when an audio
CD is loaded).
While the RESUME indicator is lit on the display, you can start
playback from the memorized point by pressing 3—Resume play.
From the remote control
For details, see “Basic Operations” on page 11.
5 Activate Realistic Sound Field
About Resume play
You can activate Surround mode for creating realistic sound fields.
• You can activate Surround mode automatically when the digital
multichannel source (Dolby Digital or DTS Digital Surround
software) or 2-channel matrix source (Dolby Surround software) is
played back—Auto Surround (see page 22).
This unit can memorize the point when you operate the following
procedures:
• Pressing 7 during playback—Pressing 3 starts Resume play
• Changing the source—Pressing DVD or 3 starts Resume play
• Turning off the unit (including Sleep Timer)
—Pressing 3 starts Resume play
When you activate or deactivate Surround mode manually, do the
following procedures:
Once you start Resume play, the RESUME indicator goes off
(the unit clears the memorized point).
The unit also clears the memorized point when you operate the
following procedures:
• Starting Resume play
• Pressing 7 (while the RESUME indicator is lit on the display)
• Selecting a track by pressing ¢ or 4 for video CD and
super VCD when playback stops
• Selecting program or random playback
• Pressing TOP MENU
• Ejecting the loaded disc
• Turning on the unit by pressing
STANDBY/ON on the
front panel or
STANDBY/ON AUDIO on the remote
control.
You can cancel Resume play (see “OTHERS menu” on page 54).
SURROUND
On the front panel:
ON/OFF
MODE
Press SURROUND ON/OFF.
REC MODE
From the remote control:
CONTROL
1) Press CONTROL repeatedly so that
“SOUND” appears on the operation
mode display.
SURR ON/OFF
7
2) Press SURR ON/OFF.
• Each time you press SURROUND ON/OFF on the front panel or
SURR ON/OFF on the remote control, Surround mode is activated
and deactivated alternately.
To close the disc tray
Press 0 again.
6 Select Surround Mode
When the
PRO LOGIC II or DSP indicator is lit, you can select
various Surround modes (see page 27).
SURROUND
ON/OFF
SURR MODE
MODE
To remove the loaded disc
Press 0.
The disc tray opens.
10/0
8 Turn Off the Power (into Standby)
REC MODE
STANDBY/ON
STANDBY
DBS
STANDBY/ON
On the front panel
VCR
TV
AUDIO
From the remote control
Press SURROUND MODE (REC MODE) on the
front panel or SURR MODE on the remote control.
• When you enjoy digital multichannel source such as Dolby Digital
or DTS Digital Surround software, you cannot change Surround
mode. When you enjoy Dolby Digital or DTS Digital Surround 2channel including 2-channel matrix source such as Dolby Surround
software, you can select Surround mode from between PRO
LOGIC II MOVIE and PRO LOGIC II MUSIC (see page 27).
On the front panel
From the remote control
STANDBY/ON on the front panel or
Press
STANDBY/ON AUDIO on the remote control.
The unit is turned off and the STANDBY lamp lights up on the front
panel.
• If you press the button while the disc tray is open, the disc tray
closes automatically, then the unit is turned off.
• A small amount of power is consumed even in standby mode. To
turn off the power completely, unplug the AC power cord.
16
EN15-18RX-DV5SL[C]4.pm5
16
02.8.5, 5:33 PM
English
Tuner Operations
Tuning into Stations Manually
Using Preset Tuning
On the front panel:
1
Once a station is assigned to a channel number, the station can be
quickly tuned. You can preset up to 30 FM and 15 AM stations.
Press FM/AM to select the band.
FM/AM
E
The last received station of the selected band is
tuned in.
The CONTROL buttons now work for tuner
operations.
• Each time you press the button, the band alternates between
FM and AM.
ANALOG
L
R
SPK.
AUTO MUTING
VOLUME
7
On the front panel ONLY:
1
MHz
Press CONTROL ∞ (or 5)
repeatedly until “< TUNING >”
appears on the display.
Tune into the station you want to preset (see
“Tuning into Stations Manually”).
• If you want to store the FM reception mode for this station,
select the FM reception mode you want. See “Selecting the
FM Reception Mode” on page 18.
Ex. : When selecting the FM band
2
To store the preset stations
Before you start, remember...
There is a time limit in doing the following steps.
If the setting is canceled before you finish, start from step 2 again.
CONTROL
ANALOG
L
R
SPK.
TUNED STEREO AUTO MUTING
VOLUME
MHz
Ex. : When selecting the FM band
ANALOG
L
3
R
SPK.
AUTO MUTING
While “< TUNING >” still remains
on the display, press repeatedly or
hold CONTROL 3 (or 2) until you
find the frequency you want.
VOLUME
2
CONTROL
ANALOG
L
SPK.
R
SPK.
TUNED STEREO AUTO MUTING
VOLUME
MHz
3
R
MEMORY
The channel number position starts flashing on the
display for about 5 seconds.
ANALOG
L
Press MEMORY.
TUNED STEREO AUTO MUTING
VOLUME
MHz
• Pressing (or holding) CONTROL 3 increases the frequencies.
• Pressing (or holding) CONTROL 2 decreases the frequencies.
Press CONTROL 3 (or 2) to select
a channel number while the channel
number position is flashing.
CONTROL
ANALOG
L
R
SPK.
TUNED STEREO AUTO MUTING
VOLUME
MHz
From the remote control:
1 Press FM/AM.
“TUNER” appears on the
operation mode display.
4
MEMORY
Press MEMORY again while the selected
channel number is flashing on the
display.
The station is assigned to the selected channel number.
• The selected channel number stops flashing and then the
frequency starts flashing.
2 Press repeatedly or hold TUNING 9 or ( until you find the
frequency you want.
• Pressing (or holding) TUNING 9 increases the frequencies.
• Pressing (or holding) TUNING ( decreases the frequencies.
ANALOG
L
R
SPK.
TUNED STEREO AUTO MUTING
VOLUME
MHz
Notes:
5
• When you hold and release CONTROL 3 (or TUNING 9 on the
remote control) or CONTROL 2 (or TUNING ( on the remote
control), the frequency keeps changing until a certain station is
tuned in.
• When a station of sufficient signal strength is tuned in, the TUNED
indicator lights up on the display.
• When an FM stereo program is received, the STEREO indicator
also lights up.
Press CONTROL 3 (or 2) to select another
frequency you want to store while the frequency
is flashing on the display.
6
Repeat steps 2 to 5 until you store all the
stations you want.
To erase a stored preset station
Storing a new station on a used channel number erases the
previously stored one.
17
EN15-18RX-DV5SL[C]4.pm5
17
02.8.5, 5:33 PM
7
To tune in a preset station
English
Tuner Operations
Selecting the FM Reception Mode
On the front panel:
1
Press FM/AM to select the band.
FM/AM
The last received station of the selected band is
tuned in.
The CONTROL buttons now work for tuner
operations.
E
When an FM stereo broadcast is hard to receive or noisy, you can
change the FM reception mode while receiving an FM broadcast.
• You can store the FM reception mode for each preset station.
Before you start, remember...
There is a time limit in doing the following steps.
If the setting is canceled before you finish, start from step 1 again.
ANALOG
L
R
SPK.
AUTO MUTING
VOLUME
MHz
Ex. : When selecting the FM band
2
Press CONTROL ∞ (or 5)
repeatedly until “< PRESET >”
appears on the display.
On the front panel:
1
CONTROL
While listening to an FM station,
press CONTROL ∞ (or 5)
repeatedly until “< FM MODE >”
appears on the display.
ANALOG
L
R
SPK.
TUNED STEREO AUTO MUTING
ANALOG
VOLUME
MHz
L
R
SPK.
TUNED STEREO AUTO MUTING
VOLUME
2
3
CONTROL
While “< PRESET >” still remains
on the display, press CONTROL 3
(or 2) to select a preset channel
number you want.
CONTROL
While “< FM MODE >” still remains
on the display, press CONTROL 3
(or 2) to select “MONO.”
CONTROL
• Each time you press the button, the FM
reception mode alternates between “AUTO
MUTING”* and “MONO.”
ANALOG
L
R
SPK.
TUNED STEREO AUTO MUTING
VOLUME
ANALOG
L
R
SPK.
TUNED STEREO AUTO MUTING
MHz
VOLUME
MHz
AUTO MUTING
• Pressing (or holding) CONTROL 3 increases the preset
channel numbers.
• Pressing (or holding) CONTROL 2 decreases the preset
channel numbers.
From the remote control:
1 Press FM/AM.
“TUNER” appears on the
operation mode display.
The last received station of the selected band is tuned in.
The number buttons now work for tuner operations.
2 Press the number buttons to select a preset channel number.
• For channel number 5, press 5.
• For channel number 15, press +10 then 5.
• For channel number 30, press +10, +10, then 10.
MONO
* “AUTO MUTING” is the initial setting. If you have already
changed the setting, “MONO” will be shown.
AUTO MUTING : Normally select this.
When a program is broadcasted in stereo,
you will hear stereo sound; when in
monaural, you will hear monaural sounds.
This mode is also useful to suppress static
noise between stations. The AUTO
MUTING indicator lights up on the display.
MONO
: Select this to improve the reception (but
stereo effect will be lost).
In this mode, you will hear noise while
tuning into the stations. The AUTO
MUTING indicator goes off from the
display. (The STEREO indicator also goes
off.)
To restore the stereo effect
Repeat step 1 , then select “AUTO MUTING” in step 2.
From the remote control:
1 Press FM/AM to select an FM station.
Number buttons now work for tuner operations.
2 Press FM MODE.
• Each time you press the button, the FM reception mode
alternates between “AUTO MUTING” and “MONO.”
18
EN15-18RX-DV5SL[C]4.pm5
18
02.8.5, 5:33 PM
English
Basic Settings
Some of the following settings are required after connecting and positioning your speakers while others will make operations easier.
You can set the items by using the SETTING button and CONTROL 5/∞/2/3 buttons on the front panel.
Setting items:
• Speaker information for front, center, rear speakers, and subwoofer*
• Speaker distance for front, center, and rear speakers*
• Crossover frequency*
• Low frequency effect attenuator*
• Dynamic range compression*
• Digital input (DIGITAL IN) terminals
• Auto surround
• Video output mode
Note:
* You can also set these items using the Choice menu (see pages 49 to 54).
Operation Buttons
Operating Procedure
To do the basic settings for this unit, use the buttons on the front
panel.
SETTING
CONTROL
On the front panel ONLY
Button
SETTING
Ex. : When setting the digital input (DIGITAL IN) terminals.
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
1
The CONTROL buttons now work for basic settings.
The setting item selected previously appears on the
display.
To do
Display the setting indications on the
display*.
CONTROL 5/∞
Select an item on the display.
Each time you press the button, the
indication changes as illustrated below.
CONTROL 3/2
Adjust the selected item.
SETTING
Press SETTING.
2
Press CONTROL ∞ (or 5)
repeatedly until “DGT (Digital)”
(with the current setting)* appears
on the display.
CONTROL
DIGITAL AUTO
• When no operation is done for about 5 seconds, the indications on
the display will disappear.
* Pressing SETTING repeatedly also changes the indication.
L
VOUT
(Subwoofer)
(Video out)
FRNT SP
AUTO SR
CNTR SP
DGT
(Front speaker)
(Center speaker)
REAR SP
(Auto surround)
(Digital)
D.COMP
(Rear speaker)
(Dynamic range compression)
FRNT D
LFE
(Front distance)
(Low frequency effect)
CNTR D
CROSS
SPK.
3
Press CONTROL 3 (or 2) to select
the appropriate digital terminal
setting.
DIGITAL AUTO
L
R
SPK.
DGT1DBS2CDR
DGT1TV 2DBS
DGT1TV 2CDR
DGT1CDR2DBS
DGT1CDR 2TV
(Crossover)
REAR D
19
19
VOLUME
DGT1DBS 2TV
(Rear distance)
EN19-24RX-DV5SL[C]4.pm5
CONTROL
• Each time you press the button, the indication
changes as follows:
(back to the beginning)
(Center distance)
VOLUME
* “1DBS 2TV” is the initial setting. If you have already changed
the setting, another combination will be shown.
Configuration of the indications on the display
SUBWFR
R
02.8.5, 5:33 PM
7 Speaker information—“SUBWFR (subwoofer),”
“FRNT SP (front speaker),” “CNTR SP (center
speaker),” and “REAR SP (rear speaker)”
To obtain the best possible effect from the Surround modes (see
pages 25 to 28), register the following information after all
connections are completed.
¶ For subwoofer:
7 Speaker distance—“FRNT D (front distance),”
“CNTR D (center distance),” and “REAR D
(rear distance)”
DIGITAL AUTO
L
R
SPK.
R
SPK.
R
SPK.
VOLUME
DIGITAL AUTO
L
VOLUME
DIGITAL AUTO
L
R
SPK.
VOLUME
DIGITAL AUTO
L
VOLUME
Select one of the following settings:
YES
: Select this when a subwoofer is connected.
NO
: Select this when no subwoofer is used.
Notes:
• “NO” is the initial setting.
• If you have selected “NO” for the subwoofer, you can only select
“LARGE” for the front speakers.
¶ For front speakers, center speaker, and rear speakers:
Set the distance from the listening point within the range of
1 ft (0.3 m) to 30 ft (9.0 m), in 1 ft (0.3m) interval.
DIGITAL AUTO
L
The distance from your listening point to the speakers is another
important element to obtain the best possible surround sound of
the Surround modes.
You need to set the distance from your listening point to the
speakers. By referring to the speaker distance setting, this unit
automatically sets the delay time of the sound through each
speaker so that sounds through all the speakers can reach you at
the same time.
R
SPK.
R
SPK.
VOLUME
Left front
speaker
DIGITAL AUTO
L
Center speaker
Right front
speaker
VOLUME
Subwoofer
DIGITAL AUTO
L
R
SPK.
11 ft
(3.3 m)
VOLUME
10 ft
(3.0 m)
9 ft
(2.7 m)
Select one of the following settings for each speaker:
8 ft
(2.4 m)
LRG (large) : Select this when the speaker size is relatively
large.
SML (small) : Select this when the speaker size is relatively
small.
NO
Left rear
speaker
Right rear
speaker
: Select this when you have not connected a
speaker. (Not selectable for the front speakers)
Notes:
• “LRG (large)” is the initial setting for the front speakers, “SML
(small)” for the center and rear speakers.
• Keep the following comment in mind as reference when
adjusting the settings.
– If the size of the cone speaker unit built in your speaker is
greater than 4 3/ 4 inches (12 cm), select “LRG (large),” and if
it is smaller than 4 3 /4 inches (12 cm), select “SML (small).”
• If you have selected “SML (small)” for the front speakers, you
cannot select “LRG (large)” for the center and rear speakers.
Ex. : In this case,
set “FRNT D” to “11ft,”
set “CNTR D” to “10ft” and
set “REAR D” to “9ft.”
Notes:
• “10ft” is the initial setting. If you have already changed the
setting, another setting will be shown.
• If you have selected “NO” for the center and rear speakers
setting, you cannot set the speaker distance for the center and
rear speakers.
20
EN19-24RX-DV5SL[C]4.pm5
20
02.8.5, 5:33 PM
English
Basic Settings
English
Basic Settings
7 Crossover frequency—“CROSS (crossover)”
7 Dynamic range compression—“D.COMP”
DIGITAL AUTO
L
DIGITAL AUTO
SPK.
R
VOLUME
DIGITAL L
C
R
SPK.
VOLUME
SUBWFR LFE
LS
Small speakers cannot reproduce the bass sounds efficiently. If
you use a small speaker in any position, this unit automatically
reallocates the bass sound elements assigned to the small
speaker to the large speakers.
To use this function properly, set the crossover frequency level
according to the size of the small speaker connected.
• If you have selected “LRG (large)” for all speakers, this
function will not take effect.
You can compress the dynamic range (difference between
maximum sound and minimum sound) of the reproduced sound.
This is useful when enjoying surround sound at night.
• This function takes effect only when playing back a source
encoded with Dolby Digital.
Select one of the following settings:
OFF
: Select this when you want to enjoy surround with its
full dynamic range. (No effect applied.)
MID
: Select this when you want to reduce the dynamic range
a little.
Select one of the following settings:
80Hz
: Select this frequency when the cone speaker unit
built in the speaker is about 4 3/4 inches (12 cm).
100Hz
: Select this frequency when the cone speaker unit
built in the speaker is about 3 15/16 inches (10 cm).
120Hz
: Select this frequency when the cone speaker unit
built in the speaker is about 3 3/16 inches (8 cm).
Notes:
RS
MAX : Select this when you want to apply the compression
effect fully. (Useful at night.)
Note:
• “MID” is the initial setting. If you have already changed the
setting, another setting will be shown.
• “100Hz” is the initial setting. If you have already changed the
setting, another frequency will be shown.
• Crossover frequency is not valid for the HEADPHONE mode.
7 Digital input (DIGITAL IN) terminals—“DGT”
7 Low frequency effect attenuator—“LFE”
DIGITAL AUTO
L
R
SPK.
VOLUME
DIGITAL AUTO
DIGITAL L
C
R
SPK.
VOLUME
SUBWFR
LS
RS
If the bass sound is distorted while playing back software
encoded with Dolby Digital or DTS Digital Surround, set the
LFE level to eliminate distortion.
• This function takes effect only when the LFE signals come in.
Select one of the following settings:
0dB
: Normally select this.
–10dB
: Select this when the bass sound is distorted.
When you use the digital input terminals, register what
components are connected to which terminals (DIGITAL IN 1/
DIGITAL IN 2). So, the correct source name will appear when
you select the digital source.
Set the appropriate digital terminal setting.
• Each time you press CONTROL 3 or 2, the display changes
as follows:
1 DBS 2 TV “ 1 DBS 2 CDR “ 1 TV 2 DBS “
1 TV 2 CDR “ 1 CDR 2 DBS “ 1 CDR 2 TV “
(back to the beginning)
Note:
• “0dB” is the initial setting. If you have already changed the
setting, “–10dB” will be shown.
Notes:
• “1DBS 2TV” is the initial setting. If you have already changed
the setting, another combination will be shown.
• If you want to connect a CD recorder to the digital input
terminal, change the source name to “CDR” from “TAPE.”
For details, see “Changing the Source Name” on page 12.
21
EN19-24RX-DV5SL[C]4.pm5
21
02.8.5, 5:33 PM
7 Auto surround—“AUTO SR”
DIGITAL AUTO
AUTO SURROUND
L
R
English
Basic Settings
7 Video output mode—“VOUT”
DIGITAL AUTO
SPK.
L
VOLUME
Surround mode is automatically activated when the digital
multichannel source such as Dolby Digital or DTS Digital
Surround software or 2-channel matrix source such as Dolby
Surround is played back.
You can enjoy Surround mode simply by selecting the source
(with digital input selected for that source)—Auto Surround.
R
SPK.
VOLUME
After connecting your TV to the unit, register the type of the
connected output terminal—VIDEO, S-VIDEO, or
DVD COMPONENT VIDEO OUT.
Without setting this, AV COMPU LINK does not work
appropriately when DVD is selected as the source (see
“AV COMPU LINK Remote Control System” on pages 59 and
60).
Select one of the following settings:
ON
OFF
: The AUTO SURROUND indicator always lights up
on the display.
• If multichannel signals come in, an appropriate
Surround mode will be turned on.
•If Dolby Digital 2-channel or DTS 2-channel
including surround signals come in, “PL II
MOVIE” will be selected.
• If Dolby Digital 2-channel or DTS 2-channel
signals without surround signals come in,
“STEREO” will be selected.
•If the other signals come in, nothing will change.
: Select this to deactivate Auto Surround.
Set the output terminal appropriately.
VIDEO
: Select this when you connect your TV to VIDEO
jack by using a composite video cord.
S
: Select this when you connect your TV to S-VIDEO
jack by using an S-video cord.
COMPNT : Select this when you connect your TV to DVD
COMPONENT VIDEO OUT jacks by using
component video cord.
Note:
• “VIDEO” is the initial setting. If you have already changed the
setting, another setting will be shown.
Notes:
• “ON” is the initial setting. If you have already changed the
setting, “OFF” will be shown.
• This function does not take effect in the following cases:
– While playing an analog source.
– While selecting “DGTL D.D.” or “DGTL DTS” as the fixed
digital input mode (see page 13).
• If you press SURROUND ON/OFF (SURR ON/OFF on the
remote control) with Auto Surround activated, Auto Surround
will be canceled temporarily for the currently selected source.
Auto Surround setting will be restored in the following cases:
– When you turn off and on the unit,
– When you change the source,
– When you change the analog/digital input, and
– When you reset “AUTO SR” to “ON” again.
22
EN19-24RX-DV5SL[C]4.pm5
22
02.8.5, 5:33 PM
English
Sound Adjustments
The following settings are required after connecting and positioning your speakers.
You can adjust the items by using the ADJUST button and CONTROL 5/∞/2/3 buttons on the front panel.
Adjustment items:
• Front speaker output balance*
• DAP effect level
• Tone*
• Speaker output levels*
Notes:
• The setting contents of adjustment items are memorized for each source.
* You can also set these items using the Choice menu (see pages 49 to 54).
Operation Buttons
Operating Procedure
To do the basic settings for this unit, use the buttons on the front
panel.
ADJUST
Ex. : When setting the front speaker output balance.
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
CONTROL
1
ADJUST
CONTROL 5/∞
2
To do
Display the adjustment indications on
the display**.
Select an item on the display.
Each time you press the button, the
indication changes as illustrated below.
Press CONTROL ∞ (or 5)
repeatedly until “BAL (Balance)”
(with the current setting)* appears
on the display.
SPK.
R
When no operation is done for about 5 seconds, the indications
on the display will disappear.
* You can also make sound adjustment except for front speakers
output balance from the remote control.
** Pressing ADJUST repeatedly also changes the indication.
Configuration of the indications on the display
* “CENTER” is the initial setting. If you have already changed
the setting, another setting will be shown.
3
Press CONTROL 3 (or 2) to adjust
the front speaker balance.
EFFECT ##
BASS
REAR R
TREBLE
REAR L
• Each time you press the button, the indication
changes as follows:
L
SPK.
R
R
–21
#
#
CENTER#
(Subwoofer)
These indications appear only when the corresponding speakers
information for each speaker is set to other than “NO.”
“EFFECT” appears only when one of DAP modes (see pages 25
to 28) is activated.
23
EN19-24RX-DV5SL[C]4.pm5
23
VOLUME
#
(Rear right)
(Rear left)
SUBWFR
CONTROL
DIGITAL AUTO
BAL
(Balance)
##
VOLUME
Adjust the selected item.
•
#
CONTROL
DIGITAL AUTO
L
CONTROL 3/2
ADJUST
The CONTROL buttons now work for sound
adjustments. The setting item selected previously
appears on the display.
On the front panel ONLY*
Button
Press ADJUST.
02.8.5, 5:33 PM
CENTER
L
–21
7 Front speaker output balance
7 Speaker output levels—“SUBWFR
—“BAL (balance)”
(subwoofer),” “CENTER,” “REAR L (left),”
and “REAR R (right)”
DIGITAL AUTO
L
R
English
Sound Adjustments
SPK.
VOLUME
DIGITAL AUTO
L
R
SPK.
R
SPK.
VOLUME
SUBWFR
If the sounds you hear from the front right and left speakers are
unequal, you can adjust the speaker output balance.
DIGITAL AUTO
DIGITAL L
C
VOLUME
SUBWFR LFE
Adjust the output balance appropriately from the listening
point within the range of R (Right) –21 to CENTER (0) or
CENTER (0) to L (Left) –21.
LS
RS
DIGITAL AUTO
DIGITAL L
C
R
SPK.
VOLUME
SUBWFR LFE
LS
Note:
RS
DIGITAL AUTO
• “CENTER” is the initial setting. If you have already changed
the setting, another setting will be shown.
DIGITAL L
C
LS
7 Tone—“BASS” and “TREBLE”
DIGITAL AUTO
L
R
SPK.
R
SPK.
VOLUME
R
SPK.
VOLUME
SUBWFR LFE
RS
You can adjust the speaker output levels if you have set the
speaker information appropriately.
• You can adjust the output level for center and/or rear speakers
only when one of proper Surround modes is activated (see
page 27).
DIGITAL AUTO
L
VOLUME
You can adjust the bass and treble sounds as you like.
Adjust the tone within the range of –10 to +10 in 2 steps
intervals.
Adjust the speaker output level within the range of –10 to
+10 in 1 step interval.
Note:
• “0” is the initial setting. If you have already changed the setting,
another setting will be shown.
7 DAP effect level—“EFFECT”
Note:
• “0” is the initial setting. If you have already changed the setting,
another setting will be shown.
ANALOG
DSP
L
R
SPK.
VOLUME
SUBWFR
LS
Adjusting sound from the remote control
DVD AUDIO/VIDEO RECEIVER
1 Press CONTROL
repeatedly so that
“SOUND” appears on the
operation mode display.
Number buttons now work for sound adjustments.
2 Adjust the level as follows:
To adjust subwoofer, press SUBWOOFER + or –.
To adjust center speaker, press CENTER + or –.
To adjust left rear speaker, press REAR•L + or –.
To adjust right rear speaker, press REAR•R + or –.
To adjust the effect level (for DAP mode), press EFFECT.
About auto memory
This unit memorizes the settings for each source:
• when you turn off the power (see page 11),
• when you change the source (see page 11),
• when you change the source name (see page 12), and
• when you change the analog/digital input mode (see page 13).
When you change the source, the memorized settings for the
newly selected source are automatically recalled.
RS
While one of DAP modes is activated (the DSP indicator lights
up on the display), you can adjust the effect level.
For details about DAP modes, see pages 25 to 28.
Adjust the effect level within the range of 1 to 5.
Note:
• “3” is the initial setting. If you have already changed the setting,
another setting will be shown.
The following can be stored for each source:
• Analog/digital input mode (see page 13)
• Input attenuator mode (see page 14)
• Front speaker output balance (see above or page 52)
• Speaker output level (see above or page 53)
• Tone adjustment (see above or page 52)
• DAP effect level (see above)
• Surround mode selection (see page 27)
Note:
• If the source is FM or AM, you can assign a different setting for
each band.
24
EN19-24RX-DV5SL[C]4.pm5
24
02.8.5, 5:33 PM
English
Creating Realistic Sound Fields
You can use the following Surround modes to reproduce a realistic
sound field:
■ Dolby Surround
• Dolby Pro Logic II
• Dolby Digital
■ DTS Digital Surround
■ DAP (Digital Acoustic Processor) modes
■ All Channel Stereo
For DVD AUDIO multichannel surround, see page 43.
■ Dolby Surround
Dolby Pro Logic II*
Dolby Pro Logic II has newly developed multichannel playback
format to decode into 5.1-channel from all 2-channel sources—
stereo source and Dolby Digital encoded source.
Matrix-based encoding/decoding method for Dolby Pro Logic II
makes no limitation for the cutoff frequency of the rear treble and
enables stereo rear sound compared to conventional Dolby Pro
Logic.
• You cannot select Dolby Pro Logic II when playing back DVD
AUDIO.
■ DTS Digital Surround**
Used to reproduce multichannel sound tracks of the software
encoded with DTS Digital Surround ( ).
• To enjoy the software encoded with DTS Digital Surround,
connect the source component using the digital terminal on the
rear of this unit. (See page 10.)
DTS Digital Surround is another discrete multichannel digital
audio format available on CD, LD, and DVD software.
Compared to Dolby Digital, audio compression ratio is relatively
low. This fact allows DTS Digital Surround format to add breadth
and depth to the reproduced sounds. As a result, DTS Digital
Surround features natural, solid and clear sound.
Typical Multichannel (5.1-channel) reproduction
Center
speaker
Dolby Pro Logic II enables to reproduce spacious sound from
original sound without adding any new sounds and tonal colorations.
Dolby Pro Logic II has two modes—Movie mode and Music mode:
Pro Logic II Movie (PL II MOVIE)—suitable for reproduction of
DOLBY SURROUND
Dolby Surround encoded sources bearing the mark
and stereo television sources. You can enjoy sound field very close
to the one created with discrete 5.1-channel sounds.
Pro Logic II Music (PL II MUSIC)—suitable for reproduction of
any 2-channel stereo music sources. You can enjoy wide and deep
sound by using this mode.
• When Dolby Pro Logic II is activated, the
indicator lights up on the display.
PRO LOGIC II
Dolby Digital*
Used to reproduce multichannel sound tracks of the software
encoded with Dolby Digital (
).
• To enjoy the software encoded with Dolby Digital, connect the
source component using the digital terminal on the rear of this
unit. (See page 10.)
D I G I T A L
Dolby Digital 5.1-channel encoding method (so-called discrete
multichannel digital audio format) records and digitally compresses
the left front channel, right front channel, center channel, left rear
channel, right rear channel, and LFE channel signals.
Since each channel is completely independent from the other
channel signals to avoid interference, you can obtain much better
sound quality with much stereo and surround effects.
Subwoofer
Left front
speaker
Right front
speaker
RX-DV5 HOME THEATER DVD-AUDIO/VIDEO RECEIVER
DVD
DBS
VCR
TV
TAPE/CDR
MASTER VOLUME
FM/AM
STANDBY
SOURCE NAME
STANDBY/ON
INPUT
DVD AUDIO
ANALOG/DIGITAL
SURROUND
ON/OFF
MODE
SETTING
ADJUST
MEMORY
COMPACT
D I G I T A L
CONTROL
SUPER VIDEO
SURROUND
INPUT ATT.
REC MODE
Left rear
speaker
DVD/SUPER VCD/VCD/CD
Right rear
speaker
■ DAP (Digital Acoustic Processor) modes
DAP modes have been designed to create important acoustic
surround elements.
• You cannot select DAP modes when playing back DVD
AUDIO.
The sound heard in a live club, dance club, hall or pavilion consists
of direct sound and indirect sound—early reflections and reflections
from behind. Direct sounds reach the listener directly without any
reflection. On the other hand, indirect sounds are delayed by the
distances of the ceiling and walls (see the diagram below).
These indirect sounds are important elements of the acoustic
surround effects. The DAP mode can reproduce a realistic sound
field by adding these indirect sounds.
DAP modes can be used when the front and rear speakers are
connected to this unit (without respect to the center speaker
connection: no sound comes out of the center speaker even if it is
connected).
Note:
• Dolby Digital or DTS software can be roughly grouped into two
categories—multichannel (up to 5.1-channel) and 2-channel
software. To enjoy surround sounds while playing Dolby Digital 2channel or DTS software, you can use Dolby Pro Logic II.
* Manufactured under license from Dolby Laboratories. “Dolby,” “Pro
Logic,” and the double-D symbol are trademarks of Dolby
Laboratories.
** Manufactured underlicense from Digital Theater Systems, Inc. US
PAT. No. 5,451,942 and other world-wide patents issued and
pending. “DTS” and “DTS Digital Surround” are trademarks of
Digital Theater Systems, Inc. Copyright 1996 Digital Theater
Systems, Inc. All rights reserved.
25
EN25-28RX-DV5SL[C]4.pm5
25
02.8.5, 5:33 PM
English
Creating Realistic Sound Fields
The following DAP modes are provided for this unit:
■ All Channel Stereo
LIVE CLUB
This mode can reproduce a larger stereo sound field using all the
connected (and activated) speakers.
• You cannot select All Channel Stereo when playing back DVD
AUDIO.
: Gives the feeling of a live music club with a low
ceiling.
DANCE CLUB : Gives a throbbing bass beat.
HALL
: Gives clear vocal and the feeling of a concert
hall.
PAVILION
: Gives the spacious feeling of a pavilion with a
high ceiling.
These DAP modes can be used to add the acoustic surround effects
while reproducing 2-channel stereo software, either analog or Linear
PCM digital signal, and can give you a real “being there” feeling.
• When one of the DAP modes is selected, the DSP indicator lights
up on the display.
All Channel Stereo can be used when the front and rear
speakers are connected to this receiver without respect to the
center speaker connection.
If the center speaker is connected and activated, the same phases of
the front left and right signals are mixed and output through the
center speaker.
All Channel Stereo can be used while reproducing 2-channel stereo
software, either analog or Linear PCM digital signal.
• When All Channel Stereo is selected, the DSP indicator lights up
on the display.
Creating sound field
All Channel Stereo reproduction
Reflections from behind
Early reflections
Sound reproduced from normal stereo
Direct sounds
Sound reproduced from All Channel Stereo
Available Surround modes for each input signal
Modes
䡬: Possible ⳯: Impossible
STEREO
DOLBY
DIGITAL
DTS
SURROUND
PL II
MOVIE
PL II
MUSIC
LIVE
CLUB
DANCE
CLUB
HALL
PAVILION
ALL CH
ST.
Dolby Digital
(Multichannel)
䡬
䡬
⳯
⳯
⳯
⳯
⳯
⳯
⳯
⳯
Dolby Digital
(2-channel)
䡬
⳯
⳯
䡬
䡬
⳯
⳯
⳯
⳯
⳯
Dolby Surround
(matrix 2-ch)
䡬
⳯
⳯
䡬
䡬
⳯
⳯
⳯
⳯
⳯
DTS Digital
Surround
(Multichannel)
䡬
⳯
䡬
⳯
⳯
⳯
⳯
⳯
⳯
⳯
DTS Digital
Surround
(2-channel)
䡬
⳯
⳯
䡬
䡬
⳯
⳯
⳯
⳯
⳯
Linear PCM
䡬
⳯
⳯
䡬
䡬
䡬
䡬
䡬
䡬
䡬
Analog
䡬
⳯
⳯
䡬
䡬
䡬
䡬
䡬
䡬
䡬
Signals
26
EN25-28RX-DV5SL[C]4.pm5
26
02.8.5, 5:33 PM
English
Creating Realistic Sound Fields
Activating Surround Mode
Selecting Surround Modes
When Auto Surround is set to “OFF” or 2-channel source other than
Dolby Surround software is played back, activate Surround mode
manually.
Make sure that you have set the speakers information correctly
(see page 20 or 53).
• If only front speakers are connected, you cannot activate any
Surround mode.
On the front panel:
Press SURROUND ON/OFF.
SURROUND
ON/OFF
MODE
The SURROUND indicator lights up on the display
(when Auto Surround is set to “OFF”).
• Each time you press the button, Surround mode is
activated and deactivated alternately.
REC MODE
When 2-channel source is played back with Surround mode
activated, you can select another Surround mode.
Available Surround modes will vary depending on the number of the
connected speakers and the playback sound.
Make sure that you have set the speaker information correctly
(see page 20 or 53).
• You cannot change Surround mode when playing back DVD
AUDIO multichannel track.
• If rear speakers are not connected, you cannot use DAP modes
and All Channel Stereo.
On the front panel:
Press SURROUND MODE.
SURROUND
ON/OFF
• Each time you press the button, Surround mode
is changed as illustrated below:
MODE
REC MODE
From the remote control:
1
Press CONTROL repeatedly so that
“SOUND” appears on the operation
mode display.
CONTROL
From the remote control:
1
Number buttons now work for sound adjustments.
2
SURR ON/OFF
Press SURR ON/OFF.
Press SURR MODE.
SURR MODE
• Each time you press the button, Surround mode is
changed as illustrated below:
10/0
7
The SURROUND indicator lights up on the
display (when Auto Surround is set to “OFF”).
• Each time you press the button, Surround mode
is activated or deactivated alternately.
When 5 or 4 (except center speaker) speakers are connected:
DIGITAL AUTO
PRO LOGIC
SURROUND
L
R
DIGITAL AUTO
PRO LOGIC
AUTO SURROUND
L
R
SUBWFR
DIGITAL AUTO
PRO LOGIC
SURROUND
L
R
SUBWFR
VOLUME
SUBWFR
About SURROUND indicators
• When Auto Surround is set to
“ON,” the AUTO SURROUND
indicator always lights up on the
display.
• When you activate Surround
mode manually with Auto
Surround set to “OFF,” the
SURROUND indicator lights up
on the display.
CONTROL
Number buttons now work for sound adjustments.
DVD AUDIO/VIDEO RECEIVER
2
Press CONTROL repeatedly so that
“SOUND” appears on the operation
mode display.
PL II MOVIE
PL II MUSIC
LIVE CLUB
DANCE CLUB
HALL
PAVILION
ALL CH ST.
(back to the beginning)
When 3 (except rear speakers) speakers are connected or
Dolby Digital including matrix source is played back:
DIGITAL AUTO
PRO LOGIC
SURROUND
L
R
VOLUME
SUBWFR
PL II MOVIE
PL II MUSIC
Signal and speaker indicators on the display
The following signal indicators light up —:
L, R
: • When digital input is selected: Light up when
the signals corresponding to each channel come
in.
• When analog input is selected: Always light
up.
C, LS, RS : Light up when the signals corresponding to each
channel come in.
S
: Lights up when the monaural rear channel signal
or Dolby Surround encoded signal comes in.
LFE
: Lights up when the LFE channel signal comes
in.
Signal indicators
27
EN25-28RX-DV5SL[C]4.pm5
27
Speaker indicators
The speaker indicators light up as follows:
• The subwoofer speaker indicator (
) lights up when
“SUBWFR” is set to “YES” (see page 20) or “USE” (see
page 53).
• The other speaker indicators light up only when the
corresponding speaker is activated, and also when required
for the current playback.
02.8.5, 5:33 PM
Adjusting Surround Mode
Using Remote Control
Notes:
• You can adjust the speaker output levels for the
activated speakers ONLY (the speaker indicators are
lit on the display).
* You cannot adjust the output levels of center speaker
when one of DAP modes is activated.
** You can adjust the effect level only when one of DAP
modes is activated.
• Before operating the DVD player using remote
control, press DVD to change the remote control
operation mode to DVD.
When playing back the source with Surround mode, you can adjust
the speaker output levels for Surround modes.
Once you have adjusted the Surround modes, the adjustment is
memorized for each source.
• You can also adjust Surround modes using the Choice menu (see
pages 49 to 54) or buttons on the front panel (see page 24).
• When using test tone, you can adjust the speaker output levels
without playback sounds.
1
Select and play back software you like.
2
Activate and select Surround mode.
For using test tone
• When 2-channel source is played back, you can select
Surround modes.
3
English
Creating Realistic Sound Fields
1) Press CONTROL.
2) Press TEST.
The playback sound stops during playback.
“TEST L” starts flashing on the display and a test tone comes
out of the speakers in the following order:
Adjust the sound.
– TV/DBS CH +
1
ANALOG
/DIGITAL
TEST
INPUT
4
2
7
10/0
(Center speaker)
(Right front speaker)
3
REAR·L
5
(Left rear speaker)
6
REAR·R
AUDIO SURR ON/OFF
SUBTITLE SURR MODE
(Left front speaker)
CENTER
CONTROL EFFECT
8
3) Adjust the speaker output level as follows:
To adjust center speaker, press CENTER +/–.
To adjust left rear speaker, press REAR•L +/–.
To adjust right rear speaker, press REAR•R +/–.
9
– SUBWOOFER +
VFP
+10
100+
(Right rear speaker)
TV RETURN
PROGRESSIVE
DIMMER
1) Press CONTROL repeatedly so that
“SOUND” appears on the operation mode
display.
Notes:
• You cannot adjust the speaker output levels if you have set the
speaker information to “NO.”
• No test tone comes out of the speaker when its speaker
information is set to “NO.”
• When you press EFFECT or SUBWOOFER +/–, the test tone
stops.
Number buttons now work for the sound adjustment.
DVD AUDIO/VIDEO RECEIVER
2) Adjust the speaker output levels as follows:
To adjust center speaker, press CENTER +/–.*
To adjust left rear speaker, press REAR•L +/–.
To adjust right rear speaker, press REAR•R +/–.
To adjust subwoofer, press SUBWOOFER +/–.
To adjust the effect level, press EFFECT.**
4) Press TEST to stop the test tone.
The test tone stops.
• When no operation is done, the test tone stops automatically
in about 1 minute.
The name for the item currently adjusted appears on the
display. For details, see the illustrations of “Speaker output
levels” on page 24.
Relation between Surround modes and adjustable items
䡬 : Possible ⳯: Impossible
Item
TEST
CENTER
REAR•L
REAR•R
SUBWOOFER
EFFECT
Dolby Digital
䡬
䡬
䡬
䡬
䡬
⳯
DTS Digital Surround
䡬
䡬
䡬
䡬
䡬
⳯
Dolby Pro Logic II
䡬
䡬
䡬
䡬
䡬
⳯
DAP
䡬
⳯
䡬
䡬
䡬
䡬
All Channel Stereo
䡬
䡬
䡬
䡬
䡬
⳯
Mode
Note:
• You cannot adjust the speakers which are not used by the selected Surround mode.
28
EN25-28RX-DV5SL[C]4.pm5
28
02.8.5, 5:33 PM
English
DVD Player Operations
Disc Information
7
Playable Disc Types
This unit has been designed to play back the following discs:
DVD VIDEO, DVD AUDIO, Video CD (VCD), Super Video CD (SVCD), audio CD, CD-R, and CD-RW.
• This unit can also play back MP3 and JPEG files recorded on CD-R and CD-RW. For details about MP3, see “MP3 Disc Playback” on
pages 45 and 46 and about JPEG, see “JPEG Disc Playback” on pages 47 and 48.
• This instruction refers to Video CD as VCD, Super Video CD as SVCD, and audio CD as CD.
Discs you can play:
Disc Type
DVD VIDEO DVD AUDIO
VCD
SVCD
CD
CD-R
CD-RW
COMPACT
Mark (Logo)
DIGITAL AUDIO
• The following discs cannot be played back:
DVD-ROM, DVD-RAM, DVD-RW, CD-ROM, CD-I (CD-I Ready), Photo CD, etc.
Playing back these discs will generate noise and damage the speakers.
• On some DVD VIDEO, DVD AUDIO, VCD, or SVCD, their actual operations may be different from what is explained in this manual. This
is due to the disc programming and disc structure, but not a malfunction of this unit.
• You can play back DVD-R recorded with the DVD VIDEO format, but some may not be played back because of the disc characteristics or
recording conditions.
Note on Region Code
DVD players and DVD VIDEO have their own Region Code
numbers. This unit can play back only DVD VIDEO recorded
with the color system of NTSC whose Region Code numbers
include “1.”
Ex. :
If a DVD VIDEO with the wrong Region Code numbers is
loaded, “REGION CODE ERROR!” appears on the TV and
playback cannot start.
IMPORTANT : Before playing a disc, make sure of the
following...
• Check the connection with the TV.
• Turn on the TV and select the correct input mode on the TV to
view the pictures or on-screen indications on the TV screen.
• For disc playback, you can change the initial setting to your
preference. (See pages 49 to 57.)
If “ ” appears on the TV screen when you press a button,
the disc cannot accept an operation you have tried to do, or
data required for that operation is not recorded on the disc.
NOTICE : In some cases, without showing “
will not be accepted.
Notes on CD-R and CD-RW
• User-edited CD-R (Recordable) and CD-RW (ReWritable) can
be played back only if they are already “finalized.”
• The unit can play back CD-R or CD-RW recorded on a
personal computer if they have been recorded in the audio CD
format.
The unit can also play back CD-R or CD-RW if MP3 files or
JPEG files are recorded on them.
However, they may not be played back because of their disc
characteristics, recording conditions, or damage or stain on
them. Especially, the configuration and characteristics of an
MP3 disc or a JPEG disc is determined by the writing
(encoding) software and hardware used for recording.
Therefore, due to the software and hardware used, the
following symptoms may occur:
– Some discs may not be played back.
– Some tracks on an MP3 disc are skipped and may not be
played back normally.
– Some files on a JPEG disc may be played back distortedly.
• Before playing back CD-R or CD-RW, read their instructions
or cautions carefully.
• CD-RW may require a longer readout time. It is caused by the
fact that the reflectance of CD-RW is lower than for regular
audio CD.
”, operations
29
EN29-42RX-DV5SL[C]4.pm5
29
02.8.5, 5:33 PM
7
English
DVD Player Operations
Disc structure
DVD VIDEO consists of “titles,” and each title may be divided into
some “chapters” (see Example 1).
For example, if DVD VIDEO contains some movies, each movie
may have its own title number and it may be further divided into
some chapters. In DVD VIDEO Karaoke, each song may have its
own title number, but it may not be further divided into chapters.
DVD AUDIO consists of “groups,” and each group may be divided
into some “tracks” (see Example 2).
Some DVD AUDIO also contain a “bonus group” that can be played
back by entering the “key number” (a kind of password). Usually
the contents of “bonus group” are not opened to the public.
Note that most DVD AUDIO include other information in addition
to audio, such as still pictures, movies, and text.
VCD, SVCD, and CD consist of “tracks” (see Example 3).
In general, each track has its own track number. (On some discs,
each track may also be divided by Indexes. This unit is not
compatible with Index function.)
7
Example 1: DVD VIDEO
Example 2: DVD AUDIO
Example 3 : VCD/SVCD/CD
Playback Control function (PBC)
The Playback Control function allows you to enjoy menu-driven
operation.
Menu-driven playback
A selection menu is displayed when you start playing VCD and
SVCD with the Playback Control feature. The selection menu shows
a list of numbers for selection. Some discs may show moving
pictures or a divided screen.
You can interact with the screen using a menu display to select and
play an entry.
See the example illustration on the right about basic feature of
menu-driven playback (for details about the operation through the
menu, see also page 33).
Note:
• While operating VCD or SVCD using the menu, some of the
functions such as repeat play may not work.
30
EN29-42RX-DV5SL[C]4.pm5
30
02.8.5, 5:33 PM
English
DVD Player Operations
This section explains advanced operations of the built-in DVD player using the remote control. For MP3 playback, see pages 45 and 46, and
for JPEG playback, see pages 47 and 48.
Before using the remote control, press DVD so that “DVD” appears on the operation mode display.
• See also “Basic DVD Player Operations” on pages 15 and 16.
DVD DVD
• VIDEO
AUDIO CD VCD CD show which types of disc are available for the operation.
• Turn on your TV and select the correct input mode on the TV.
VIDEO
SUPER
AUDIO
If “ ” appears on the TV when you press a button, the disc cannot accept an operation you have tried to do, or data required for
that operation is not recorded on the disc.
Using the On-screen Bar
DVD-VIDEO 8.5Mbps
TITLE 14 CHAP 23 TOTAL 1:25:58
You can check the information of a disc while the disc is loaded and
use some functions through the on-screen bar.
DIGEST TOP MENU
MENU
CHOICE
Ex. : When a DVD VIDEO is played
ENTER
ON SCREEN
RETURN
& Whenever a disc is loaded
DVD-VIDEO 8.5Mbps
TITLE 14 CHAP 23 TOTAL 1:25:58
DVD-VIDEO 8.5Mbps
TITLE 14 CHAP 23 TOTAL 1:25:58
TIME
OFF
Press ON SCREEN.
CHAP.
1/3
1/3
1/3
(with the pull-down menu)
• Each time you press the button, the on-screen bar changes as
shown to the right:
The on-screen bar goes off.
(back to the beginning)
Contents of the on-screen bar with the pull-down menu
1
2
TITLE 14 CHAP 23 TOTAL 1:25:58
DVD-VIDEO 8.5Mbps
TIME
CHAP.
OFF
3
1/3
1/3
4 Operation icons (on the pull-down menu)
Indications
1/3
TIME
4
Ex.: When a DVD VIDEO is played
1 Disc type
2 Playback information
Indications
Mbps
TITLE 14
CHAP 23
GROUP 1
TRACK 14
TOTAL 1:25:58
OFF
Meanings
shows the current
transfer rate (Megabits
per second).
shows the current title.
shows the current
chapter.
shows the current
group.
shows the current
track.
shows the elapsed
playing time.
Available discs
CHAP.
TRACK
1/3
1/3
All discs
1/3
3 Playback conditions for all types of disc
Indications
Meanings
/
/
Playback
Fast forward/Fast reverse
Forward/reverse slow-motion
PAGE 1/15
PROG.
RND.
Meanings
Select this to change the
time indication.
See page 32.
Select this to repeat
playback. See page 42.
Select this for time search.
See page 37.
Select this for chapter
search. See page 37.
Select this for track
search. See page 37.
Select this to change the
audio language or channel.
See pages 35 and 36.
Select this to change
subtitle language.
See page 35.
Select this to change the
view angle. See page 34.
Select this to change the
page. See page 44.
Select this for the program
play. See page 41.
Select this for the random
play. See page 41.
Pause
Stop
31
EN29-42RX-DV5SL[C]4.pm5
31
02.8.5, 5:34 PM
Available discs
All discs
Basic Operation through the On-screen
Bar
Changing the Time Indication
You can change the time information in the on-screen bar and the
display window on the center unit.
Ex. : When selecting the repeat mode for DVD VIDEO
DIGEST TOP MENU
DIGEST TOP MENU
English
DVD Player Operations
MENU
MENU
CHOICE
CHOICE
ENTER
ENTER
ON SCREEN
1
RETURN
& During playback or while
stopped
ON SCREEN
1
Press ON SCREEN twice.
TIME
2
CHAP.
OFF
1/3
1/3
Press cursor 3 (or 2) repeatedly to move
OFF
to
on the pull-down menu.
DVD-VIDEO 8.5Mbps
TIME
3
TITLE 14 CHAP 23 TOTAL 1:25:58
1/3
CHAP.
OFF
TITLE 14 CHAP 23 TOTAL 1:25:58
1/3
1/3
& During playback or while
stopped
Press ON SCREEN twice.
The on-screen bar appears on the TV.
The on-screen bar with pull-down menu appears on the TV.
DVD-VIDEO 8.5Mbps
RETURN
1/3
2
Press cursor 3 (or 2) to move
3
Press ENTER.
to
TIME
.
• Each time you press the button, the time indication changes as
follows:
TOTAL ] T. (total) REM ] TIME ] REM ]
(back to the beginning)
Press ENTER.
TOTAL : Elapsed time of the disc
T. REM : Remaining time of the disc
TIME : Elapsed playing time of the current chapter/track
REM : Remaining time of the current chapter/track
The pop-up window appears under the pull-down menu.
DVD-VIDEO 8.5Mbps
TIME
CHAP.
TITLE 14 CHAP 23 TOTAL1:25:58
1/3
1/3
1/3
OFF
4
Press cursor ∞ (or 5) to select the desired option
in the pop-up window.
• Each time you press the button, the options change.
DVD-VIDEO 8.5Mbps
TIME
CHAP.
Notes:
TITLE 14 CHAP 23 TOTAL 1:25:58
1/3
1/3
1/3
EX. :
TIME 0:25:58 ]
REM 0:18:14 ] (back to the beginning)
The indication on the display also changes.
Press ENTER.
• While playing VCD, SVCD, or CD, the indication of the hour digit
does not appear.
The setting changes and the pop-up window goes off.
DVD-VIDEO 8.5Mbps
TIME
• The time indication in the on-screen bar changes as follows:
TOTAL 1:25:58 ] T.REM 0:45:41 ]
TITLE
5
To turn off the on-screen bar
Press ON SCREEN.
CHAP.
TITLE
TITLE 14 CHAP 23 TOTAL 1:25:58
1/3
1/3
1/3
To turn off the on-screen bar
Press ON SCREEN.
Note:
• See the pages for the detail of each function.
32
EN29-42RX-DV5SL[C]4.pm5
32
02.8.5, 5:34 PM
English
DVD Player Operations
7
Locating a Desired Scene from
the Disc Menu
Using the disc menu, you can start playing a title, chapter, or track
you specify.
If the on-screen bar is shown on the TV, press ON SCREEN
repeatedly to go off the on-screen bar.
7
From the VCD/SVCD menu with PBC
VCD or SVCD recorded with PBC has its own menus such as a list
of the tracks. (After loading such a disc, “PBC” appears on the
display.) You can locate the specific track by using the menu (see
also page 30).
• Before using the remote control, press DVD to change the
remote control operation mode.
DVD VIDEO and DVD AUDIO generally have their own menus
which show the disc contents. These menus contain various items
such as titles of movies, names of songs, or artist information, and
display them on the TV screen. You can locate a desired scene by
using these menus.
REPEAT
SLEEP
FM MODE
CENTER
CONTROL EFFECT
1
ANALOG
/DIGITAL
TEST
INPUT
4
2
3
5
6
REAR·R
AUDIO SURR ON/OFF
8
10/0
9
– SUBWOOFER +
VFP
+10
100+
TV RETURN
PROGRESSIVE
CHOICE
DIGEST TOP MENU
ENTER
ON SCREEN
RETURN
& When DVD VIDEO/
DVD AUDIO is loaded
MENU
CHOICE
ENTER
ON SCREEN
1
RETURN
Press TOP MENU or MENU.
The DVD menu appears on the TV. (The menu usually appears
on the TV automatically after loading the disc.)
2
1
Ex. :
Press number buttons (1–10, +10) to select the
number of the desired item.
The unit starts playback from the selected item.
Ex. : To select 3, press 3.
To select 11, press +10, then 1.
3
1
Ex. :
DVD VIDEO/DVD AUDIO normally has a “top” menu when it
contains more than one title/group. In this case, press
TOP MENU to show the title menu.
Some DVD VIDEO/DVD AUDIO may also have a different
menu which is shown by pressing the MENU button.
See the instructions of each DVD VIDEO/DVD AUDIO for its
particular menu.
2
& When the menu appears on
the TV during playback
with PBC
REAR·L
SUBTITLE SURR MODE
MENU
STROBE
– TV/DBS CH +
7
DIGEST TOP MENU
9/FF
TV/VIDEO REW/( TUNING/GROUP
From the DVD menu
Use cursor 5/∞/3/2 to select a desired item,
then press ENTER.
The unit starts playback of the selected item.
• With some discs, you can also select items by entering the
corresponding number using number buttons.
2
3
To return to the menu
Press RETURN.
When “NEXT” or “PREVIOUS” is shown on the TV screen:
To go to the next page, press ¢.
To return to the previous page, press 4.
To play back PBC-compatible VCD/SVCD without PBC
Start playback by pressing the number buttons while playback is
stopped.
The elapsed playing time appears on the display instead of “PBC.”
To restore PBC
Press TOP MENU or MENU.
“PBC” appears again on the display.
About indication on the display while playing back a VCD/SVCD
While you are playing back a VCD/SVCD recorded with PBC, playback information appears on the display as follows:
Ex. : When VCD is played back using PBC
Ex. : When VCD is played back without using PBC
DIGITAL AUTO
L
DSP
R
DIGITAL AUTO
SPK.
VOLUME
SUBWFR
L
DSP
R
SPK.
Track number
Track number
33
EN29-42RX-DV5SL[C]4.pm5
VOLUME
SUBWFR
33
02.8.5, 5:34 PM
Elapsed playing time
3
Selecting a View Angle—ANGLE
While playing back DVD VIDEO/DVD AUDIO containing multiview angles, you can enjoy the same scene at different angles.
The
icon appears at the beginning of playback when the current
scene has multi-view angles.
7
10/0
– SUBWOOFER +
VFP
+10
100+
+
+
+
VOLUME
–
–
–
Press ENTER.
To turn off the on-screen bar
Press ON SCREEN.
TV RETURN
PROGRESSIVE
PAGE
MUTING TV VOL
ZOOM
1
4
The pop-up window goes off.
DIMMER
ANGLE
Press cursor ∞ (or 5) repeatedly to select the
desired view angle.
• Each time you press the button, the angle of the scene
changes.
Selecting a view angle
SUBTITLE SURR MODE
English
DVD Player Operations
& During playback
7
Press ANGLE.
The following pop-up window appears on the TV.
Ex. : The first view angle is selected out of 3 view angles
recorded.
Showing all view angles on the TV
SUBTITLE SURR MODE
10/0
100+
+
+
PAGE
MUTING TV VOL
ZOOM
1/3
1
–
–
1
TV RETURN
PROGRESSIVE
DIMMER
ANGLE
1/3
– SUBWOOFER +
VFP
+10
DIGEST TOP MENU
+
VOLUME
–
& During playback
MENU
CHOICE
2
ENTER
Press ANGLE repeatedly to select the desired
view angle.
ON SCREEN
• Each time you press the button, the angle of the scene
changes.
Ex.: 1/3 ] 2/3 ] 3/3 ] (back to the beginning)
1/3
1
Press and hold ANGLE for a few seconds.
Up to 9 pictures of the different camera angles recorded on a
disc appear on the TV screen.
Ex. : When 3 view angles are recorded.
2/3
1
RETURN
2
3/3
3
Angle list
The pop-up window goes off if no operation is done for about
5 seconds.
Selected picture
Using the on-screen bar:
1
2
Press ON SCREEN repeatedly until the on-screen
bar with pull-down menu appears on the TV.
Press cursor 3 (or 2) repeatedly to move
in the pull-down menu, then press
ENTER.
The following pop-up window appears under the pull-down
menu.
Ex. : The first view angle is selected out of 3 view angles
recorded.
DVD-VIDEO 8.5Mbps
TIME
CHAP.
OFF
to
2
Press cursor 5/∞/3/2 repeatedly to move
the desired view.
3
Press ENTER.
to
The angle list goes off, and playback starts at the selected view
angle.
Notes:
• While the angle list is shown on the TV, you cannot listen to the
sound.
• If “
” appears on the TV, the current scene does not contain
multi-view angles.
TITLE 14 CHAP 23 TOTAL 1:25:58
1/3
1/3
1/3
1
34
EN29-42RX-DV5SL[C]4.pm5
34
02.8.5, 5:34 PM
English
DVD Player Operations
Changing the Languages—SUBTITLE and
AUDIO
While playing back DVD VIDEO/DVD AUDIO/SVCD containing
subtitles in different languages, you can select the subtitle language
to be displayed on the TV.
The
icon appears at the beginning of playback when the current
scene has plural subtitles.
When DVD VIDEO/DVD AUDIO contains audio languages
(soundtrack), you can select the language (soundtrack) to listen to.
The
icon appears at the beginning of playback when the current
scene has plural audio languages.
• You can also select the audio channel(s) of VCD or SVCD.
7
Selecting the subtitle language
8
7
10/0
9
The pop-up window goes off.
To turn off the on-screen bar
Press ON SCREEN.
Notes:
• For DVD VIDEO/DVD AUDIO: Some subtitle languages are
abbreviated in the pop-up window. See “Language code list” on
page 52.
• For SVCD: SVCD can contain up to four subtitles. Pressing
SUBTITLE changes the subtitles regardless of whether the
subtitles are recorded or not. (Subtitles will not change if no subtitle
is recorded.)
• If “
” appears on the TV, the current scene does not contain
plural subtitles.
7
– SUBWOOFER +
VFP
+10
100+
TV RETURN
Selecting the audio language
ANALOG
/DIGITAL
TEST
INPUT
4
REAR·L
5
+
+
7
& During playback
8
SUBTITLE SURR MODE
10/0
1
REAR·R
AUDIO SURR ON/OFF
+
6
PROGRESSIVE
DIMMER
ANGLE
Press ENTER.
REAR·R
AUDIO SURR ON/OFF
SUBTITLE SURR MODE
4
100+
Press SUBTITLE.
9
– SUBWOOFER +
VFP
+10
TV RETURN
PROGRESSIVE
DIMMER
The following pop-up window appears on the TV.
Ex. : “ENGLISH” is selected among 3 subtitle languages
recorded.
1
ENGLISH
Press AUDIO.
The following pop-up window appears on the TV.
Ex. : “ENGLISH” is selected among 3 audio languages
recorded.
1/3
1/3
& During playback
ENGLISH
1/3
1/3
ENGLISH
ENGLISH
2
Press SUBTITLE repeatedly to select the desired
subtitle language.
• Each time you press the button, the subtitle language changes.
2
The pop-up window goes off if no operation is done for about
5 seconds.
• Each time you press the button, the audio language changes.
The pop-up window goes off if no operation is done for about
5 seconds.
Using the on-screen bar:
1
Press ON SCREEN repeatedly until the on-screen
bar with pull-down menu appears on the TV.
2
Press cursor 3 (or 2) repeatedly to move
in the pull-down menu, then press
ENTER.
to
The following pop-up window appears under the pull-down
menu.
Ex. : “ENGLISH” is selected among 3 subtitle languages
recorded.
DVD-VIDEO 8.5Mbps
TIME
CHAP.
OFF
TITLE 14 CHAP 23 TOTAL 1:25:58
1/3
1/3
1/3
ENGLISH
3
Press AUDIO repeatedly to select the desired
audio language.
Using the on-screen bar:
1
Press ON SCREEN repeatedly until the on-screen
bar with pull-down menu appears on the TV.
2
Press cursor 3 (or 2) repeatedly to move
in the pull-down menu, then press
ENTER.
The following pop-up window appears under the pull-down
menu.
Ex. : “ENGLISH” is selected among 3 audio languages
recorded.
DVD-VIDEO 8.5Mbps
TIME
OFF
• Each time you press the button, the subtitle language changes.
35
35
TITLE 14 CHAP 23 TOTAL 1:25:58
1/3
ENGLISH
Press cursor ∞ (or 5) repeatedly to select the
desired subtitle language.
EN29-42RX-DV5SL[C]4.pm5
CHAP.
02.8.5, 5:34 PM
1/3
1/3
to
3
4
Press cursor ∞ (or 5) repeatedly to select the
desired audio language.
2
• Each time you press the button, the audio channel changes.
Press ENTER.
For VCD:
Ex. :
ST ] L ] R ] (back to the beginning)
To turn off the on-screen bar
Press ON SCREEN.
ST : To listen to normal stereo playback.
L : To listen to the L (left) audio channel.
R : To listen to the R (right) audio channel.
Notes:
For SVCD:
Ex. :
• Some audio languages are abbreviated in the pop-up window. See
“Language code list” on page 52.
• If “
” appears on the TV, the current scene does not contain
plural audio languages.
ST 1 ] ST 2 ] L 1 ] R 1 ] L 2 ] R 2 ]
(back to the beginning)
ST 1/ST 2 : To listen to normal stereo playback of ST 1 or
ST 2 channel.
L 1/L 2 : To listen to the L (left) 1 or 2 audio channel.
R 1/R 2 : To listen to the R (right) 1 or 2 audio channel.
Selecting the audio channel
When playing back some Karaoke VCDs or SVCDs, you can enjoy
Karaoke by selecting the audio channel to play.
ANALOG
/DIGITAL
TEST
INPUT
4
The pop-up window goes off if no operation is done for about
5 seconds.
REAR·L
5
7
6
REAR·R
AUDIO SURR ON/OFF
8
SUBTITLE SURR MODE
10/0
Using the on-screen bar:
9
– SUBWOOFER +
VFP
+10
100+
1
Press AUDIO repeatedly to select the desired
audio channel.
• Each time you press the button, the audio language changes.
The pop-up window goes off.
7
English
DVD Player Operations
TV RETURN
& During playback
1
Press ON SCREEN repeatedly until the on-screen
bar with pull-down menu appears on the TV.
2
Press cursor 3 (or 2) repeatedly to move
in the pull-down menu, then press
ENTER.
PROGRESSIVE
Press AUDIO.
The following pop-up window appears on the TV.
Ex. : “ST” (stereo) is selected.
The following pop-up window appears under the pull-down
menu.
Ex. : “ST” (stereo) is selected.
ST
ST
ST
to
ST
TRACK 4 TIME
VCD
TIME
OFF
PROG. RND.
25:58
ST
ST
3
Press cursor ∞ (or 5) repeatedly to select the
desired audio channel(s).
• Each time you press the button, the audio channels change.
4
Press ENTER.
The pop-up window goes off.
To turn off the on-screen bar
Press ON SCREEN.
36
EN29-42RX-DV5SL[C]4.pm5
36
02.8.5, 5:34 PM
English
DVD Player Operations
Playing from a Specified Position on a Disc
You can start playing a title, chapter, or track you specify.
You can also play a disc from the specified time.
7
Locating a desired chapter/track
—Chapter/Track Search
7
You can start playing at your desired position by specifying the
elapsed playing time from the beginning of the current title up to
“9:59:59” (for DVD VIDEO/DVD AUDIO), or from the beginning
of the disc up to “99:59” (for VCD/SVCD/CD).
• Before using the remote control, press DVD to change the
remote control operation mode.
When playing back DVD VIDEO/DVD AUDIO, you can search for
the chapter/track number to be played.
• Before using the remote control, press DVD to change the
remote control operation mode.
1
TEST
INPUT
4
2
1
TEST
INPUT
4
5
6
REAR·R
8
7
10/0
9
– SUBWOOFER +
VFP
+10
100+
6
TV RETURN
DIGEST TOP MENU
& For DVD VIDEO:
During playback
MENU
For VCD/SVCD:
While stopped or during
playback without PBC
RETURN
For DVD AUDIO/CD:
While stopped or during
playback
REAR·R
AUDIO SURR ON/OFF
7
8
10/0
3
REAR·L
SUBTITLE SURR MODE
REAR·L
SUBTITLE SURR MODE
2
ANALOG
/DIGITAL
AUDIO SURR ON/OFF
3
5
CENTER
CONTROL EFFECT
CENTER
CONTROL EFFECT
ANALOG
/DIGITAL
Locating a desired position—Time Search
9
– SUBWOOFER +
VFP
+10
100+
DIGEST TOP MENU
CHOICE
& During playback
ENTER
TV RETURN
ON SCREEN
MENU
CHOICE
ENTER
ON SCREEN
1
2
RETURN
Press ON SCREEN repeatedly until the on-screen
bar with pull-down menu appears on the TV.
1
Press ON SCREEN repeatedly until the on-screen
bar with pull-down menu appears on the TV.
2
Press cursor 3 (or 2) repeatedly to move
to
in the pull-down menu, then press ENTER.
Press cursor 3 (or 2) repeatedly to move
to
CHAP.
or TRACK in the pull-down menu, then
press ENTER.
The following pop-up window appears under the pull-down
menu.
DVD-VIDEO 8.5Mbps
The following pop-up window appears under the pull-down
menu.
Ex. : When DVD VIDEO is loaded.
TITLE 14 CHAP 23 TOTAL 1:25:58
DVD-VIDEO 8.5Mbps
TIME
1/3
CHAP.
OFF
CHAPTER
1/3
1/3
TIME
TITLE 14 CHAP 23 TOTAL 1:25:58
CHAP.
OFF
1/3
1/3
1/3
TIME _ : _ _ : _ _
3
Use the number buttons (0–9) to enter the time.
Ex. : To play back from a point of 1 (hours): 02 (minutes): 49
(seconds) from the beginning
_
Ex. : When DVD AUDIO is loaded.
DVD-AUDIO 8.5Mbps
TIME
GROUP 2 TRACK 3 TIME 1:25:58
TRACK
OFF
PROG. RND
Press 1
1/3 PAGE 1/3
TRACK _
3
Press 0
Press the number buttons (0–9) to enter the
desired chapter/track number.
Press 2
Ex. : To select chapter/track number 8, press 8.
To select chapter/track number 10, press 1 then 0.
To select chapter/track number 37, press 3 then 7.
Press 4
Press 9
• To correct a misentry
Repeat step 3 until the desired number appears in the pop-up
window.
4
• To correct a misentry
Press cursor 2 repeatedly until the wrong number is erased,
then press the number buttons to enter the correct number.
Press ENTER.
The unit starts playback from the selected chapter/track.
To turn off the on-screen bar
Press ON SCREEN.
4
Press ENTER.
The unit starts playback from the specified time.
Notes:
• The 10/0 button works as the 0 button in this function.
• The +10 button is not used in this function.
• You can select up to the 99th chapter/track.
37
EN29-42RX-DV5SL[C]4.pm5
37
02.8.5, 5:34 PM
2
To turn off the on-screen bar
Press ON SCREEN.
Press cursor 5/∞/3/2 to move
scene.
• If there are more than 9 scenes, the digest screen will have
more than one page.
Notes:
• The 10/0 button works as the 0 button in this function.
• The +10 button is not used in this function.
• You can specify the time in hours/minutes/seconds for DVD VIDEO/
DVD AUDIO, and in minutes/seconds for VCD/SVCD/CD.
7
to the desired
To show other pages of the digest screen
To display the previous page, select the left top scene,
then press cursor 2.
Locating a desired scene—DIGEST
The unit can display the opening scenes of each title or chapter on
DVD VIDEO or each track of a VCD/SVCD.
You can select a desired title, chapter, or track from the opening
scenes shown on the TV screen.
DIGEST TOP MENU
MENU
To display the next page, select the right bottom scene,
then press cursor 3.
OR
Press ¢ to display the next page.
Press 4 to display the previous page.
CHOICE
ENTER
ON SCREEN
RETURN
& For DVD VIDEO:
While stopped or during
playback
For VCD/SVCD:
While stopped or during
playback without PBC
1
3
Press ENTER.
The unit starts playback from the selected scene.
Press DIGEST.
Up to 9 opening scenes are displayed.
Selected scene
Note:
• For some discs, it may take some time before all the scenes appear
on the TV screen.
• While DVD VIDEO is stopped :
The opening scenes of each title appear on the TV screen.
• During DVD VIDEO playback :
The opening scenes of each chapter in the current title appear
on the TV screen.
• When VCD or SVCD is loaded :
The opening scenes of each track appear on the TV screen.
38
EN29-42RX-DV5SL[C]4.pm5
38
02.8.5, 5:34 PM
English
DVD Player Operations
English
DVD Player Operations
7
Special Picture Playback
This unit provides special picture playback functions including
frame-by-frame, strobe, slow-motion, and zoom.
7
Playing back in slow-motion
• Before using the remote control, press DVD to change the
remote control operation mode.
DBS
VCR
TV/VIDEO REW/( TUNING/GROUP
Frame-by-frame playback
REPEAT
SLEEP
FM MODE
• Before using the remote control, press DVD to change the
remote control operation mode.
TV/VIDEO REW/( TUNING/GROUP
REPEAT
SLEEP
FM MODE
STROBE
2
• Each time you press the button, the still picture advances to the
next frame.
To return to normal playback
Press 3.
Note:
Press and hold ¢ or 4.
To play back in forward slow-motion, press and hold ¢.
To play back in reverse slow-motion (for DVD VIDEO only),
press and hold 4.
• Each time you press and hold the button, the playback speed
changes as follows:
Forward:
]
• Before using the remote control, press DVD to change the
remote control operation mode.
FM MODE
1
CENTER
1
2
1/16 ]
1/8
]
1/4
1/32 ]
]
1/2
1/16 ]
1/8
]
1/4
9/FF
To pause slow-motion playback
Press 8 (STROBE).
STROBE
– TV/DBS CH +
CONTROL EFFECT
1/32 ]
1/2
Reverse (for DVD VIDEO only):
Showing continuous still pictures—STROBE
SLEEP
& During playback
Press 8 (STROBE) at the point where you want
to start playback in slow-motion.
• You can also perform the above operation using 8 on the front panel.
REPEAT
STROBE
Playback pauses.
& During playback
Press 8 (STROBE) repeatedly.
TV/VIDEO REW/( TUNING/GROUP
9/FF
– TV/DBS CH +
1
9/FF
– TV/DBS CH +
7
DVD
3
& During playback
Press STROBE (8) at the point you want to view
as continuous pictures.
Playback pauses.
To return to normal playback
Press 3.
Note:
• You cannot listen to the sound during slow-motion playback.
2
Press and hold STROBE (8) for a few seconds.
The same 9 frames (still pictures) appear on the TV screen.
You can advance the frames one by one in the following step.
3
7
Zooming in—ZOOM
PAGE
MUTING TV VOL
ZOOM
Press STROBE (8) once.
–
–
The picture in the middle on the top row shows an advanced
frame from the one on the left.
DIGEST TOP MENU
VOLUME
–
MENU
& During playback or while
paused
CHOICE
ENTER
Advanced frame
ON SCREEN
RETURN
Press ZOOM.
• Pressing the button repeatedly advances the frames one by one.
• Pressing 3 instead of STROBE (8) advances each frame at
normal playback speed with a time delay over the all 9 frames.
(The sound is muted.)
• Each time you press the button, the magnification changes as
follows:
x 2 ] x 4 ] x 8 ] x 16 ] x 32 ] x 64 ] x 128 ]
x 256 ] x 512 ] x 1024
ZOOM x4
To return to the normal screen
Press and hold STROBE (8) for a few seconds.
Notes:
• If you press and hold STROBE (8) for a few seconds during
playback, 9 still pictures also appear but they advance in normal
playback speed with a time delay. (The sound is muted.)
• You can also perform the above operation using 8 on the front panel.
Ex. : When x4 zoom is selected
39
EN29-42RX-DV5SL[C]4.pm5
39
02.8.5, 5:34 PM
English
DVD Player Operations
To adjust the appearance of the picture
To move the zoomed-in position
Press cursor 5/∞/3/2.
When selecting “USER1” or “USER2,” you can adjust the
appearance of picture.
ZOOM x4
1
Press VFP, then press cursor 3 (or 2) repeatedly
to select “USER1” or “USER2.”
USER1
GAMMA
To return to normal playback
Press ENTER.
+0
BRIGHTNESS +0
CONTRAST
+0
SATURATION +0
Note:
TINT
+0
SHARPNESS
+3
Y DELAY
+0
• While being zoomed in, the picture may look coarse.
7
2
Changing the VFP setting—VFP
Adjust gradually to show preferable appearance by confirming
the picture.
GAMMA
: Controls the brightness of neutral tints
while maintaining the brightness of dark
and bright portions (–4 to +4).
BRIGHTNESS : Controls the brightness of the screen
(–16 to +16).
CONTRAST : Controls the contrast of the screen
(–16 to +16).
SATURATION : Controls the color depth of the screen
(–16 to +16).
TINT
: Controls the tint of the screen
(–16 to +16).
SHARPNESS : Controls the sharpness of the screen
(+0 to +3).
Y DELAY
: Controls the color gap of the screen
(–2 to +2).
The VFP (Video Fine Processor) function enables you to
adjust the picture based on the picture tone, or personal preference.
• There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
• Before using the remote control, press DVD to change the
remote control operation mode.
SUBTITLE SURR MODE
10/0
– SUBWOOFER +
VFP
+10
100+
TV RETURN
PROGRESSIVE
DIMMER
ANGLE
+
+
PAGE
MUTING TV VOL
ZOOM
–
–
DIGEST TOP MENU
+
VOLUME
& During playback
–
MENU
CHOICE
ENTER
ON SCREEN
1
RETURN
3
Press VFP.
Press cursor ∞ (or 5) repeatedly to select a
parameter you want to adjust.
Press ENTER.
The VFP setting screen disappears and the following pop-up
window appears on the TV.
The current VFP setting screen appears on the TV.
NORMAL
GAMMA
+0
GAMMA
BRIGHTNESS +0
CONTRAST
GAMMA
SATURATION +0
TINT
+0
SHARPNESS
+3
Y DELAY
+0
Ex. : When “NORMAL” is selected
2
+0
+0
Press cursor 3 (or 2) repeatedly to select the
VFP mode.
• Each time you press the button, the VFP mode changes as
follows.
NORMAL “ CINEMA “ USER1 “ USER2 “
(back to the beginning)
NORMAL
: Normally select this.
CINEMA
: Suitable for a movie source.
USER1 and USER2 : You can adjust parameters that affect
the appearance of picture and store the
settings (see the right).
To turn off the VFP setting screen
Press VFP.
+0
Ex. : When “GAMMA” is selected
4
Press cursor ∞ (or 5) repeatedly to change the
setting, then press ENTER.
The current VFP setting screen appears again.
5
Repeat steps 2 to 4 to adjust other parameters.
To turn off the VFP setting screen
Press VFP.
To activate your setting
Press VFP, then press cursor 3 (or 2) repeatedly to select
“USER1” or “USER2.”
Note:
• The VFP setting screen disappears if no operations are done for
more than about 10 seconds.
40
EN29-42RX-DV5SL[C]4.pm5
40
02.8.5, 5:34 PM
English
DVD Player Operations
Program Playback and Random Playback
5
Press 3.
Playback starts in the programmed order.
You can play tracks on DVD AUDIO/VCD/SVCD/CD in the desired
order or in the random order.
• You cannot use Resume play for the program or random playback.
7
Playing back in the desired order
You can play up to 99 tracks in the desired order.
• You may program the same tracks more than once.
• Before using the remote control, press DVD to change the
remote control operation mode.
9/FF
TV/VIDEO REW/( TUNING/GROUP
REPEAT
SLEEP
FM MODE
DIGEST TOP MENU
MENU
CHOICE
1
ENTER
CENTER
2
ANALOG
/DIGITAL
TEST
INPUT
4
3
5
7
10/0
6
9
– SUBWOOFER +
VFP
+10
100+
1
RETURN
REAR·R
8
SUBTITLE SURR MODE
ON SCREEN
REAR·L
AUDIO SURR ON/OFF
To stop the program playback
Press 7.
• When VCD or SVCD is played back, the program screen appears
again.
• To edit your program, repeat steps 3 and 4.
STROBE
– TV/DBS CH +
CONTROL EFFECT
To erase a step
to the desired step, then press 7.
Press cursor 5 (or ∞) to move
• To program the next steps again, press cursor ∞ repeatedly to
move
to the blank step, then repeat step 3.
TV RETURN
& While stopped
To cancel the program playback mode
Clear the program you made as follows:
1 Press 7 to stop playback.
2 Press ON SCREEN to turn on the on-screen bar.
3 Press 7.
• You can also clear the program by ejecting the disc or turning off
the unit.
PROGRESSIVE
Press ON SCREEN repeatedly until the on-screen
bar with pull-down menu appears on the TV.
To turn off the on-screen bar
Press ON SCREEN.
Note:
2
Press cursor 3 (or 2) repeatedly to move
to
PROG. in the on-screen bar, then press ENTER.
• When all the programmed tracks have been played, the program
playback stops.
The program screen appears on the TV and the PROGRAM
indicator lights up on the display.
• 10 steps appear at a time on the program screen.
7
For DVD AUDIO:
Total Program Time 00:00:00
PROGRAM
No.
Group
3
For VCD/SVCD/CD:
1
2
3
4
5
6
7
8
9
10
CHOICE
ENTER
ON SCREEN
Ex. : To select the track/group number 3, press 3.
To select the track/group number 14, press +10 then 4.
To select the track/group number 40, press +10, +10, +10
then 10.
• For DVD AUDIO ONLY: Enter a group number and a track
number in order.
• When you enter a track/group number that does not exist on
the loaded disc, your entry is ignored.
• The total program time is shown at the top of the program
screen on the display.
For DVD AUDIO:
Total Program Time 00:04:14
No.
1
2
3
4
5
6
7
8
9
10
4
Group
3
Track
–
2
MENU
No.
Press the number buttons (1–10, +10) to enter a
track/group you want to program.
PROGRAM
DIGEST TOP MENU
Total Program Time 00:00:00
PROGRAM
Track
1
2
3
4
5
6
7
8
9
10
Playing back tracks in random order
RETURN
1
Press ON SCREEN repeatedly until the on-screen
bar with pull-down menu appears on the TV.
2
Press cursor 3 (or 2) repeatedly to move
to
RND. in the on-screen bar, then press ENTER.
The RANDOM indicator lights up on the display and playback
starts in random order.
To stop the random playback
Press 7.
The random playback is canceled.
• When all tracks have been played once, the random playback is
also canceled.
For VCD/SVCD/CD:
Total Program Time 00:04:14
PROGRAM
No.
1
2
3
4
5
6
7
8
9
10
3
Repeat step 3 to program the next steps.
• Each time you enter a track number in the step at the bottom
of the program screen, the next steps appear.
Notes:
• The same track will not be played more than once during the
random playback.
• During the random playback, you can skip back to the beginning of
the current track by pressing 4, but cannot skip back to the tracks
that have been played.
• During the random playback, pressing ENTER with RND. selected
in the on-screen bar cancels the random playback and continues
playback in the normal order.
41
EN29-42RX-DV5SL[C]4.pm5
41
& While stopped
02.8.5, 5:34 PM
Repeat Playback
Notes:
You can repeat playback of the current title or chapter (for DVD
VIDEO), group or track (for DVD AUDIO), or track (for VCD/
SVCD/CD).
You can also repeat playback of a desired portion.
7
Repeating a current title, group, chapter, or
all tracks
TV/VIDEO REW/( TUNING/GROUP
REPEAT
SLEEP
FM MODE
9/FF
STROBE
MENU
• If you select “ALL” during random playback, the all tracks of the
disc are played repeatedly in random order.
• “A-B” cannot be selected during the program and random
playback or while a disc is not played back.
To turn off the on-screen bar
Press ON SCREEN.
To cancel the repeat playback
Select “OFF” in step 3 , then press ENTER.
7
– TV/DBS CH +
DIGEST TOP MENU
English
DVD Player Operations
& For DVD VIDEO:
During playback
Repeating a desired part
You can repeat playback of a desired portion by specifying the
beginning (point A) and the ending (point B).
CHOICE
ENTER
ON SCREEN
RETURN
For VCD/SVCD:
During playback or while
stopped without PBC
DIGEST TOP MENU
MENU
CHOICE
ENTER
For DVD AUDIO/CD:
During playback or while
stopped
ON SCREEN
RETURN
& During playback
1
Press ON SCREEN repeatedly until the on-screen
bar with pull-down menu appears on the TV.
1
Press ON SCREEN repeatedly until the on-screen
bar with pull-down menu appears on the TV.
2
Press cursor 3 (or 2) repeatedly to move
to
in the on-screen bar, then press ENTER.
2
Press cursor 3 (or 2) repeatedly to move
to
in the on-screen bar, then press ENTER.
The following pop-up window appears under the on-screen bar.
DVD-VIDEO 8.5Mbps
TIME
CHAP.
The following pop-up window appears under the on-screen bar.
TITLE 14 CHAP 23 TOTAL1:25:58
1/3
1/3
DVD-VIDEO 8.5Mbps
1/3
TIME
OFF
3
CHAP.
TITLE 14 CHAP 23 TOTAL1:25:58
1/3
1/3
1/3
OFF
Press cursor ∞ (or 5) repeatedly to select the
repeat mode, then press ENTER.
• Each time you press cursor ∞ (or 5), the repeat mode changes
as follows:
For DVD VIDEO:
3
Press cursor ∞ (or 5) repeatedly to select “A-B.”
4
Press ENTER at the beginning of the portion you
want to repeat (point A).
The following display appears in the on-screen bar.
The REPEAT A indicator also lights up on the display.
CHAPTER “ TITLE “ A-B “ OFF “
(back to the beginning)
DVD-VIDEO 8.5Mbps
TIME
For DVD AUDIO/VCD/SVCD/CD:
5
TRACK “ ALL/GROUP “ A-B “ OFF “
(back to the beginning)
CHAPTER : Repeats the current chapter (the REPEAT 1
indicator lights up on the display)
TRACK
: Repeats the current track (the REPEAT 1
indicator lights up on the display)
TITLE
: Repeats the current title (the REPEAT
indicator lights up on the display)
ALL/GROUP
: Repeats all the tracks on the disc, in the
group, or of the program (the REPEAT
indicator lights up on the display)
A-B
: Repeats a desired portion (see the right
column)
OFF
: Select this to cancel the repeat mode
• You can directly change the repeat mode (except
A-B) for the current chapter, title, track, or disc by
pressing REPEAT on the remote control.
REPEAT
A-
CHAP.
TITLE 14 CHAP 23 TOTAL 1:25:58
1/3
1/3
1/3
Press ENTER at the end of the portion you want
to repeat (point B).
A-B repeat playback starts. The selected part of the disc
(between point A and B) is played repeatedly.
During repeat A-B playback, the REPEAT A-B indicator lights
up on the display.
Point A
Point B
To turn off the on-screen bar
Press ON SCREEN.
To cancel the A-B repeat playback
Select “OFF” in step 3 , then press ENTER.
Note:
• While playing back DVD VIDEO, A-B repeat playback is possible
only within the same title.
42
EN29-42RX-DV5SL[C]4.pm5
42
02.8.5, 5:34 PM
English
DVD Player Operations
Additional Information for DVD AUDIO
7
About indication on the front panel
The unit has various indications for DVD AUDIO.
• When DVD AUDIO is loaded
The DVD AUDIO lamp lights up on the front panel.
RX- DV5 HO M E THE ATE R DV D-AUDI O / V I DE O RE CE I V E R
DVD
DBS
STANDBY
VCR
TV
TAPE/CDR
DVD AUDIO
FM/AM
SOURCE NAME
STANDBY/ON
INPUT
SURROUND
MODE
ANALOG/DIGITAL ON/OFF
DVD AUDIO
S
D I G I T A L
SURROUND
INPUT ATT.
Notes:
• When playing back DVD AUDIO, you cannot select the following
Surround modes:
– Pro Logic II,
– DAP modes, and
– All Channel Stereo.
• For the multichannel track which can be mixed down:
When “NONE” is selected as the speaker setting for the center or
rear speakers, the current multichannel track is mixed down to the
front speaker channels.
• For the multichannel track which cannot be mixed down:
– When you try to deactivate Surround mode during playback,
“MULTI CH” appears on the display and Surround mode still
remains.
– When you start playback with Surround mode deactivated, “LR
ONLY” appears on the display. In this case, you cannot listen to
the sounds other than left and right front channels.
• When playing back DVD AUDIO
The following indications appear on the display.
Special Playback for DVD AUDIO
1 2
DIGITAL AUTO
L
C
SPK.
R
B.S.P
BONUS
VOLUME
7
Selecting the group
SUBWFR LFE
LS
TV/VIDEO
RS
3
4
REPEAT
5
REW/( TUNING/GROUP 9/FF
SLEEP
FM MODE
DVD AUDIO/VIDEO RECEIVER
STROBE
– TV/DBS CH +
1 B.S.P (Browsable Still Picture) indicator
: Lights when you play back still pictures.
See “Selecting a still picture” on page 44.
2 BONUS indicator : Lights when the loaded DVD AUDIO has
a bonus group. See “Playing back a bonus
group” on page 44.
3 Group indication : Shows the current group number. See
“Selecting the group” on this page.
4 Track indication : Shows the current track number.
5 Elapsed playing time
7
When playing back the high-resolution multichannel sound, you can
activate Surround mode manually.
• When Auto surround is set to “ON,” Surround mode is activated
automatically for the multichannel sound.
1
TEST
INPUT
4
2
7
INPUT
4
3
REAR·L
5
7
8
SUBTITLE SURR MODE
6
9
– SUBWOOFER +
Press CONTROL repeatedly so that “GROUP”
appears on the operation mode display, then press
GROUP 9 or ( to select the desired group.
• You can also select the group by pressing number buttons (1-9).
• When you select the bonus group, the key number entry indication
appears (see page 44).
DVD AUDIO/VIDEO RECEIVER
3
5
6
REAR·R
8
9
– SUBWOOFER +
& During playback
Press CONTROL repeatedly so that “SOUND”
appears on the operation mode display, then press
SURR ON/OFF.
• Each time you press SURR ON/OFF, Surround mode is activated
or deactivated alternately.
• You can also use the SURROUND ON/OFF button on the front
panel to activate or deactivate Surround mode.
43
EN43-44RX-DV5SL[C]4.pm5
43
& Whenever a disc is loaded
REAR·R
AUDIO SURR ON/OFF
REAR·L
AUDIO SURR ON/OFF
SUBTITLE SURR MODE
TEST
2
CENTER
CONTROL EFFECT
ANALOG
/DIGITAL
1
ANALOG
/DIGITAL
Note:
Activating Surround mode
– TV/DBS CH +
CENTER
CONTROL EFFECT
02.8.5, 5:34 PM
7
7
Selecting a still picture
Most DVD AUDIO include still pictures, which usually appear in
turn automatically during playback according to the playback
sequence.
You can change the picture (turn the page) manually when the
current still picture has selectable pages.
DVD AUDIO/VIDEO RECEIVER
CENTER
CONTROL EFFECT
1
2
ANALOG
/DIGITAL
TEST
INPUT
4
3
REAR·L
5
7
6
REAR·R
AUDIO SURR ON/OFF
8
SUBTITLE SURR MODE
10/0
9
– SUBWOOFER +
VFP
+10
100+
ANGLE
TV RETURN
Playing back a bonus group
Some DVD AUDIO have a special group called “bonus group”
whose contents are not opened to the public. The bonus group is
always assigned to the last group of a disc (for example, if a disc
contains 4 groups including a bonus group, “group 4” is the bonus
group).
To play back a bonus group, you have to enter the specific “key
number” (a kind of password) for the bonus group. A way of getting
the key number depends on discs.
After getting the key number, you can play back the bonus group by
the following procedure.
& While the B.S.P indicator
lights up on the display
TV
TAPE
CDR
FM/AM
DBS
VCR
DVD
PAGE
MUTING TV VOL
ZOOM
+
PAGE
MUTING TV VOL
ZOOM
DIGEST TOP MENU
–
DIGEST TOP MENU
+
– TV/DBS CH +
1
–
MENU
ANALOG
/DIGITAL
TEST
INPUT
4
2
7
10/0
RETURN
REAR·R
9
& While the BONUS
indicator lights up
– SUBWOOFER +
VFP
+10
100+
Using the on-screen bar:
ON SCREEN
6
8
SUBTITLE SURR MODE
1
ENTER
REAR·L
AUDIO SURR ON/OFF
Press CONTROL repeatedly so that “GROUP”
appears on the operation mode display, then press
PAGE + or – to select the desired page.
CHOICE
3
5
MENU
/
CENTER
CONTROL EFFECT
VOLUME
–
VOLUME
–
PROGRESSIVE
DIMMER
English
DVD Player Operations
TV RETURN
Press CONTROL repeatedly so that “GROUP”
appears on the operation mode display, then
press the number buttons to select a bonus group.
The key number entry indication appears as follows:
DIGEST TOP MENU
MENU
On the TV
CHOICE
ENTER
ON SCREEN
1
RETURN
KEY _ _ _ _
& While the B.S.P indicator
lights up on the display
On the display
Press ON SCREEN repeatedly until the on-screen
bar with pull-down menu appears on the TV.
DIGITAL AUTO
AUTO SURROUND
L C R
LS
2
Press cursor 3 (or 2) repeatedly to move
to
PAGE
in the on-screen bar, then press ENTER.
TIME
OFF
GROUP 2 TRACK 3 TIME 1:25:58
TRACK
PROG. RND
1/3 PAGE 1/3
1
3
Press cursor ∞ (or 5) repeatedly to select the
desired page.
To turn off the on-screen bar
Press ON SCREEN.
BONUS
VOLUME
RS
2
Press DVD on the remote control to change the
remote control operation mode to “DVD.”
3
Enter the key number using the number buttons
(0-9), then press ENTER.
The following pop-up window appears under the on-screen bar.
DVD-AUDIO 8.5Mbps
SPK.
LFE
When you enter the correct key number, the unit starts playing
back the bonus group and the BONUS indicator goes off.
• If you enter the wrong number, enter the number again.
To turn off the key number entry
Perform one of the following:
• Press 7,
• Open the disc tray, or
• Turn off the unit.
Opening the disc tray or turning off the unit also erases the memory
of the key number, while pressing 7 does not erase the memory.
Notes:
• If you specify a track in the bonus group for the program playback,
the key number entry indication in step 1 appears for entering the
key number.
• In the random playback mode, tracks in the bonus group are not
played back.
44
EN43-44RX-DV5SL[C]4.pm5
44
02.8.5, 5:34 PM
English
MP3 Disc Playback
This unit can play back MP3 files on a CD-R or CD-RW. We call such a disc “MP3 disc” in this instruction.
• Before using the remote control, press DVD to change the remote control operation mode for the MP3 disc operations.
• Turn on your TV and select the correct input mode on the TV.
If “
” appears on the TV when you press a button, the disc cannot accept an operation you have tried to do.
What is MP3?
MP3 is an abbreviation of Motion Picture Experts Group 1 (or
MPEG-1) Audio Layer 3. MP3 is simply a file format with a data
compression. By using MP3 format, one CD-R or CD-RW can
contain about 10 times as many songs as a regular CD can.
Basic Operations
You can also use the buttons on the front panel if they have the
similar names as those on the remote control.
• Before using the remote control, press DVD to change the
remote control operation mode.
Disc structure
On an MP3 disc, each song (material) is recorded as a file. Files
are usually grouped into a folder. Folders can also include other
folders, creating hierarchical folder layers.
This unit simplifies the hierarchical construction of a disc and
manages files and folders by “tracks” and “groups.”
DBS
VCR
DVD
9/FF
TV/VIDEO REW/( TUNING/GROUP
REPEAT
SLEEP
FM MODE
STROBE
– TV/DBS CH +
DIGEST TOP MENU
MENU
Up to 99 groups
CHOICE
ENTER
Group 2
Group 1
Track 1
Group 3
Track 2
Group 4
ON SCREEN
RETURN
Group 5
Up to 150 tracks
This unit can recognize up to 150 tracks per group and up to 99
groups per disc (up to 14,850 tracks in total). Since the unit
ignores the tracks whose numbers are exceeding 150 and the
groups whose numbers are exceeding 99, they cannot be played
back.
• If there are any type of files other than MP3 files in a folder,
those files are also counted in the total file number.
7
Starting playback
Load an MP3 disc, then press 3.
The unit starts playback. The MP3 CONTROL screen appears on
the TV (see page 46).
Current track number
DIGITAL AUTO
AUTO SURROUND
L
R
SPK.
Current group number
Notes:
• MP3 discs (either CD-R or CD-RW) require a longer readout time
than normal discs. (It depends on the complexity of the folder/file
configuration.)
• When making an MP3 disc, select ISO 9660 Level 1 or Level 2
as the disc format.
• This unit supports “multi-session” discs (up to 5 sessions).
• This unit cannot play “packet write” discs.
• This unit can play MP3 files only with the following file
extensions: “.MP3,” “.Mp3,” “.mP3,” and “.mp3.”
• ID3* tags cannot be shown on the display.
* An MP3 file can contain file information called “ID3 Tag” where
its album name, performer, track title, etc. are recorded. There
are two versions—ID3v1 (ID3 Tag version 1) and ID3v2 (ID3
Tag version 2).
• It is recommended that you make each MP3 file at sampling rate
of 44.1 kHz and at bit rate of 128 kbps. The unit cannot play back
the files made at bit rate of under 64 kbps.
• If both MP3 files and JPEG files are recorded on a disc, set the
MP3/JPEG setting in the PICTURE menu to “MP3.”
(See page 52.)
• Some MP3 discs may not be played back because of their disc
characteristics or recording conditions.
Notes:
• The following functions are not available to MP3 disc playback:
Program playback, random playback, fast-forward/reverse playback,
on-screen bar, and choice menus
• Some tracks on an MP3 disc are skipped and may not be played
back normally.
7
Stopping playback temporarily
Press 8.
To start playback again
Press 3.
7
Selecting groups or tracks
To skip groups forward
Press cursor 3.
To skip groups backward
Press cursor 2.
To skip tracks forward
Press ¢ or cursor ∞ as many times as required.
To skip to the beginning of the current track
Press 4 once.
To skip tracks backward
Press 4 or cursor 5 as many times as required.
7
Stopping playback completely
45
45
Elapsed playing time
(minutes:seconds) of the current
track during playback
When all tracks in a group have been played, the unit plays tracks in
the next group.
Press 7.
EN45-48RX-DV5SL[C]4.pm5
VOLUME
SUBWFR
02.8.5, 5:34 PM
Operations through the MP3 CONTROL
Screen
You can search for and play the desired groups and tracks through
the MP3 CONTROL screen shown on TV.
7
MP3 CONTROL screen
To start playback by specifying a track number
Press the number buttons (1 – 10, +10) to enter the track number.
Ex. : To select the track number 3, press 3.
To select the track number 14, press +10 then 4.
To select the track number 24, press +10, +10, then 4.
To select the track number 110, press +10 ten times, then 10.
The entered number appears in the track number indication, then
playback starts from the specified track.
Current group number/Total group number
Current
group
Elapsed playing time
of the current track
Time : 00:00:14
Track : 05 / 14 (Total 41)
Cloudy
Fair
Fog
Hail
Indian summer
Rain
Shower
Snow
Thunder
Typhoon
Wind
Winter sky
MP3 CONTROL
Group : 02 / 03
Blue
Red
Green
You can repeat playback of the current track, group, or all the tracks
on the loaded disc.
TV/VIDEO REW/( TUNING/GROUP
REPEAT
The repeat indication appears on the MP3 CONTROL screen and
the REPEAT indicator lights up on the display.
• Each time you press the button, the repeat mode changes as
follows:
Operations
• Before using the remote control, press DVD to change the
remote control operation mode.
TEST
INPUT
4
7
10/0
REPEAT TRACK “ REPEAT GROUP “ REPEAT ALL
“ the indication goes off “ (back to the beginning)
REPEAT TRACK : Repeats the current track
REPEAT GROUP : Repeats the current group
REPEAT ALL
: Repeats all the tracks on the disc
To cancel repeat mode
Press REPEAT repeatedly until the repeat indication goes off from
the MP3 CONTROL screen (the REPEAT indicator also goes off
from the display).
MENU
3
REAR·L
5
6
CHOICE
ENTER
REAR·R
AUDIO SURR ON/OFF
SUBTITLE SURR MODE
DIGEST TOP MENU
CENTER
2
CENTER
& During playback or while
stopped
Press REPEAT.
• Some group and track names may not be displayed correctly
because of their recording conditions.
• The order of groups and tracks on an MP3 disc may be displayed
differently from the order displayed on your personal computer.
• Up to 12 groups and tracks are displayed on the TV at a time.
Pressing cursor 5/∞/ 3/2 repeatedly shows the hidden groups and
tracks one by one.
1
STROBE
From the remote control ONLY:
Notes:
ANALOG
/DIGITAL
FM MODE
CONTROL EFFECT
Current track number/
Total track number in the current group
(Total track number on the loaded disc)
CONTROL EFFECT
SLEEP
9/FF
– TV/DBS CH +
Current track
7
Repeat Playback
8
9
ON SCREEN
RETURN
– SUBWOOFER +
VFP
+10
100+
TV RETURN
To select or skip groups during playback
To select the next groups (or skip groups forward)
Press cursor 3 repeatedly.
To select the previous groups (or skip groups backward)
Press cursor 2 repeatedly.
To select or skip tracks during playback
To select the next tracks (or skip tracks forward)
Press cursor ∞ repeatedly.
To select the previous tracks (or skip tracks backward)
Press cursor 5 repeatedly.
46
EN45-48RX-DV5SL[C]4.pm5
46
02.8.5, 5:34 PM
English
P3 Disc Playback
English
JPEG Disc Playback
This unit can play back JPEG files on a CD-R or CD-RW. We call such a disc “JPEG disc” in this instruction.
• Before using the remote control, press DVD to change the remote control operation mode for the JPEG disc operations.
• Turn on your TV and select the correct input mode on the TV.
If “
” appears on the TV when you press a button, the disc cannot accept an operation you have tried to do.
What is JPEG?
A still-picture data compression system proposed by the Joint
Photographic Expert Group, which features little distortion in
image quality in spite of its high compression ratio.
Disc structure
On a JPEG disc, each still picture (material) is recorded as a file.
Files are usually grouped into a folder. Folders can also include
other folders, creating hierarchical folder layers.
This unit simplifies the hierarchical construction of a disc and
manages folders by “groups.”
Slide-show Playback
You can play back the still pictures one after another automatically
—slide-show playback.
You can also use the buttons on the front panel if they have the
similar names as those on the remote control.
• Before using the remote control, press DVD to change the
remote control operation mode.
TV/VIDEO REW/( TUNING/GROUP
REPEAT
SLEEP
FM MODE
CHOICE
Group 2
ANALOG
/DIGITAL
TEST
INPUT
4
2
Group 3
Group 4
5
7
Group 5
This unit can recognize up to 150 files per group and up to 99
groups per disc (up to 14,850 files in total). Since the unit ignores
the files whose numbers are exceeding 150 and the groups whose
numbers are exceeding 99, they cannot be played back.
• If there are any type files other than JPEG files in a folder, those
files are also counted in the total file number.
Notes:
• JPEG discs (either CD-R or CD-RW) require a longer readout
time than normal discs. (It depends on the complexity of the
folder/file configuration.)
• When making a JPEG disc, select ISO 9660 Level 1 or Level 2
as the disc format.
• This unit supports “multi-session” discs (up to 5 sessions).
• This unit cannot play “packet write” discs.
• The unit can play JPEG files only with the following file
extensions: “.jpg,” “.jpeg,” “.JPG,” “.JPEG” and any uppercase and
lowercase combinations (such as “.Jpg”).
• It is recommended you to record a file at 640 x 480 resolution. (If
a file has been recorded at a resolution of more than 640 x 480,
it will take a longer time to be shown.)
• If both JPEG files and MP3 files are recorded on a disc, set the
MP3/JPEG setting in the PICTURE menu to “JPEG.”
(See page 52.)
• This system can play only baseline JPEG files *. Progressive
JPEG files* or lossless JPEG files* cannot be played.
* – Baseline JPEG format: Used for digital cameras, web, etc.
– Progressive JPEG format: Used for web.
– Lossless JPEG format: An old type and rarely used now.
• Some JPEG discs may not be played back because of their disc
characteristics or recording conditions.
7
RETURN
6
9
– SUBWOOFER +
VFP
+10
100+
Up to 150 files
ENTER
ON SCREEN
REAR·R
8
SUBTITLE SURR MODE
10/0
3
REAR·L
AUDIO SURR ON/OFF
File 2
MENU
CENTER
CONTROL EFFECT
1
File 1
DIGEST TOP MENU
STROBE
– TV/DBS CH +
Up to 99 groups
Group 1
9/FF
TV RETURN
Starting slide-show playback
Load a JPEG disc, then press 3.
The slide-show playback starts. Each file (still picture) is shown on
the TV for about 3 seconds, then changed to the next file one after
another.
When all files in a group have been played back, the unit plays back
files in the next group.
7
Stopping slide-show playback temporarily
Press 8.
You can zoom in on the still picture (see page 48).
To start slide-show playback again
Press 3.
7
To start the slide-show playback by
specifying a file number
Press the number buttons (1 – 10, +10) to enter the file number.
Ex. : To select the file number 3, press 3.
To select the file number 14, press +10 then 4.
To select the file number 24, press +10, +10, then 4.
To select the file number 110, press +10 ten times, then 10.
The selected file number appears in the file number indication, then
the slide-show playback starts from the file you have specified.
7
Selecting files or groups
To skip pictures (files) forward
Press ¢ or cursor ∞ as many times as required.
To skip pictures (files) backward
Press 4 or cursor 5 as many times as required.
7
Stopping slide-show playback completely
Press 7.
The JPEG CONTROL screen appears on the TV.
• For how to operate through the JPEG CONTROL screen, see
“Operations through the JPEG CONTROL Screen” on page 48.
47
EN45-48RX-DV5SL[C]4.pm5
47
02.8.5, 5:34 PM
Notes:
• The following functions are not available to the slide-show playback:
program playback, random playback, repeat playback, fast-forward/
reverse playback, on-screen bar, and choice menus.
• If a black screen continuously appears in the slide-show playback:
the file currently played may be non-baseline JPEG file. In this
case, select a playable file (a baseline JPEG file) again (e.g.,
pressing 7 or MENU to open the JPEG CONTROL screen, etc.).
Note that it may take a long time to select another file.
• Some files on a JPEG disc may be distored during playback.
Operations through the JPEG CONTROL
Screen
You can search for and show the desired groups and files through the
JPEG CONTROL screen.
7
7
To select a group
7
To select a file
7
To show the selected file
Press cursor 3 (or 2) repeatedly.
Press cursor ∞ (or 5) repeatedly.
Press ENTER.
• When the still picture has been shown on the TV thoroughly, you
can zoom in or out the still picture (see pages 39 and 40).
• If you press 3, the slide-show playback starts from the selected
file.
7
Zooming in on the still picture
Press ZOOM.
To move the zoomed-in position
Press cursor 5/∞/3/2.
JPEG CONTROL screen
To return to normal playback
Press ENTER.
See also pages 39 and 40.
Current group number/Total group number
Current
group
7
JPEG CONTROL
Group : 02 / 03
Mountain
Sea
Sky
English
JPEG Disc Playback
To return to the JPEG CONTROL screen
Press MENU or 7.
FILE : 05 / 14 (Total 41)
Anemone fish
Bonito
Butterfly fish
Dolphin
Garden eel
Manta ray
Seal
Swordfish
Tuna
Turtle
Whale
Whale shark
Repeat Playback
You can repeat playback of the current group or all the files on the
loaded disc.
Current file
Current file number/
Total file number in the current group
(Total file number on the loaded disc)
TV/VIDEO REW/( TUNING/GROUP
REPEAT
SLEEP
FM MODE
9/FF
STROBE
– TV/DBS CH +
CONTROL EFFECT
& During playback or while
stopped
CENTER
From the remote control ONLY:
Notes:
• You can check the group number and the file number on the display
window.
• Some group and file names may not be displayed correctly
because of the recording condition.
• The order of groups and files on a JPEG disc may be displayed
differently from the order displayed on your personal computer.
• Up to 12 groups and files are displayed on the TV at a time.
Pressing cursor 5/∞/ 3/2 repeatedly shows the hidden groups and
files one by one.
• Before using the remote control, press DVD to change the
remote control operation mode.
TV/VIDEO REW/( TUNING/GROUP
REPEAT
SLEEP
FM MODE
9/FF
STROBE
PAGE
MUTING TV VOL
ZOOM
–
–
DIGEST TOP MENU
VOLUME
–
Press REPEAT.
The repeat indication appears on the JPEG CONTROL screen and
the REPEAT indicator lights up on the display.
• Each time you press the button, the repeat mode changes as
follows:
REPEAT GROUP “ REPEAT ALL “
the indication goes off “ (back to the beginning)
REPEAT GROUP : Repeats the current group
REPEAT ALL
: Repeats all the files on the disc
To cancel repeat mode
Press REPEAT repeatedly until the repeat indication goes off from
the JPEG CONTROL screen (the REPEAT indicator also goes off
from the display).
MENU
– TV/DBS CH +
CHOICE
ENTER
ON SCREEN
RETURN
48
EN45-48RX-DV5SL[C]4.pm5
48
02.8.5, 5:34 PM
English
Choice Menu Operations
You can adjust the initial settings through the choice menu on the TV.
Before operating the choice menu, select the source you want to adjust by pressing source selecting button.
• When selecting FM or AM as the source, you cannot use the choice menu.
• When selecting the source other than DVD, FM, and AM, you can use the AUDIO and SPK. SETTING menus. The audio adjustments are
memorized for each source.
Notes:
•
•
•
•
You need to turn on your TV and select the correct input mode on the TV.
You can only use the remote control for the choice menu operations.
You can change the language used in the choice menu. See page 51.
You cannot show the choice menu when an MP3 disc or a JPEG disc is loaded.
Operation Buttons
Configuration of Choice Menu
To do the operations in this choice menu, use the buttons on the
remote control.
CHOICE
ENTER
From the remote control ONLY
Button
CHOICE
To do
Display the choice menu on the TV.
Each time you press the button, the
choice menu is turned on and off
alternately.
The choice menu has the following menus:
LANGUAGE menu
(see page 51)
You can select the initial
language for the disc menu,
audio, and subtitle. You can also
select the language used on the
TV screen while operating this
unit.
PICTURE menu (see page 51)
You can select the desired
options concerning a picture or
monitor screen.
LANGUAGE
MENU LANGUAGE
ENGLISH
AUDIO LANGUAGE
ENGLISH
SUBTITLE
OFF
ON SCREEN LANGUAGE ENGLISH
SELECT
USE
TO SELECT, USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
ENTER
PICTURE
MONITOR TYPE
4:3 LB
PROGRESSIVE MODE
AUTO
SCREEN SAVER
ON
MP3 / JPEG
MP3
SELECT
5/∞
3/2
Adjust the selected item on the choice
menu.
ENTER
Move to the submenu of the selected
item or decide the setting.
USE
TO SELECT, USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
ENTER
Select an item.
AUDIO menu (see page 52)
You can adjust the sound
settings of this unit through this
menu.
AUDIO
L/R BALANCE
CENTER
BASS
0
TREBLE
0
LFE ATT.
0 dB
D. RANGE COMPRESSION MID
SELECT
USE
TO SELECT, USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
ENTER
SPK. SETTING menu
(see page 53)
You can adjust the speaker
settings. You can also adjust the
output level of the speakers.
SPK. SETTING
SIZE
LEVEL
DISTANCE
RETURN TO INITIAL
SELECT
ENTER
OTHERS menu (see page 54)
You can change the settings for
some of the functions.
To set Parental Lock, use this
menu.
RESUME
ON
ON SCREEN GUIDE
ON
AUTO STANDBY
OFF
PARENTAL LOCK
ENTER
EN49-58RX-DV5SL[C]4.pm5
49
02.8.5, 5:34 PM
USE
TO SELECT, USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
OTHERS
SELECT
49
100Hz
CROSS OVER
USE
TO SELECT, USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
5
Operating Procedure
Press cursor ∞ (or 5) repeatedly
to select the desired option.
Ex. : When setting the progressive mode.
Before operating the choice menu, press DVD to change the
source to DVD.
1
ENTER
PICTURE
CHOICE
Press CHOICE.
English
Choice Menu Operations
The LANGUAGE menu appears on the TV.
MONITOR TYPE
4:3 LB
PROGRESSIVE MODE
AUTO
SCREEN SAVER
ON
MP3 / JPEG
MP3
VIDEO
FILM
AUTO
LANGUAGE
MENU LANGUAGE
ENGLISH
AUDIO LANGUAGE
ENGLISH
SUBTITLE
OFF
SELECT
ENTER
Ex. : When “FILM” is selected.
ON SCREEN LANGUAGE ENGLISH
SELECT
6
USE
TO SELECT. USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
ENTER
USE
TO SELECT. USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
Press ENTER to finish the setting.
ENTER
PICTURE
2
Press cursor 3 (or 2) repeatedly
to display PICTURE menu.
ENTER
MONITOR TYPE
4:3 LB
PROGRESSIVE MODE
FILM
SCREEN SAVER
ON
MP3 / JPEG
MP3
• Each time you press the button, the menu
changes.
SELECT
ENTER
USE
TO SELECT. USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
PICTURE
MONITOR TYPE
4:3 LB
PROGRESSIVE MODE
AUTO
SCREEN SAVER
ON
MP3 / JPEG
MP3
SELECT
ENTER
3
To set other items on the same choice menu
Repeat steps 3 to 6.
To move to another choice menu
Press cursor 3 (or 2) repeatedly to select a choice menu you want
to set up.
USE
TO SELECT. USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
Press cursor ∞ (or 5) repeatedly
to move
to “PROGRESSIVE
MODE.”
To return to the normal screen
Press CHOICE.
ENTER
Note:
• Some items in the choice menu consist of submenus for setting up
various options. Pressing ENTER makes the submenus for the
selected item appear on the TV.
You can set the items using cursor 5/∞ and ENTER (as explained
in steps 5 and 6 above).
PICTURE
MONITOR TYPE
4:3 LB
PROGRESSIVE MODE
AUTO
SCREEN SAVER
ON
MP3 / JPEG
MP3
SELECT
ENTER
4
USE
TO SELECT. USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
Press ENTER.
The pop-up window appears, listing the
selectable options.
ENTER
PICTURE
MONITOR TYPE
4:3 LB
PROGRESSIVE MODE
AUTO
SCREEN SAVER
ON
MP3 / JPEG
MP3
SELECT
ENTER
VIDEO
FILM
AUTO
USE
TO SELECT. USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
50
EN49-58RX-DV5SL[C]4.pm5
50
02.8.5, 5:34 PM
English
Choice Menu Operations
7 LANGUAGE menu
LANGUAGE
MENU LANGUAGE
ENGLISH
AUDIO LANGUAGE
ENGLISH
SUBTITLE
OFF
ON SCREEN LANGUAGE ENGLISH
You can select “MENU LANGUAGE,” “AUDIO LANGUAGE,”
and “SUBTITLE” only before playback.
¶ MENU LANGUAGE
Some discs have multiple languages.
Select one of the languages or language codes from AA to ZU
(see “Language code list” on page 52) as the menu language.
¶ AUDIO LANGUAGE
Some discs have multiple audio languages.
Select one of the following settings:
16:9 NORMAL (Wide television conversion) :
Select this when the aspect ratio of your TV is fixed
to 16:9 (wide TV). The unit automatically adjusts the
screen width of the output signal correctly when
playing back a picture whose aspect ratio is 4:3.
16:9 AUTO (Wide television conversion) :
Select this when the aspect ratio of your TV is 16:9
(wide TV).
4:3 LB (Letter Box conversion) :
Select this when the aspect ratio of your TV is 4:3
(conventional TV). While viewing a wide screen
picture, the black bars appear on the top and the
bottom of the screen.
4:3 PS (Pan Scan conversion) :
Select this when the aspect ratio of your TV is 4:3
(conventional TV). While viewing a wide screen
picture, the black bars do not appear; however, the
left and right edges of the pictures will not be shown
on the screen.
Select one of the languages or language codes from AA to ZU
(see “Language code list” on page 52).
¶ SUBTITLE
Some discs have multiple subtitle languages.
Select one of the languages or language codes from AA to ZU
(see “Language code list” on page 52) or “OFF (no subtitle).”
Note:
• When the language you have selected for MENU LANGUAGE,
AUDIO LANGUAGE, or SUBTITLE is not recorded on a disc,
the original language is used as the initial language
automatically.
¶ ON SCREEN LANGUAGE
Select one of the languages shown on the TV.
7 PICTURE menu
Ex. : 16:9
Ex. : 4:3 LB
Ex. : 4:3 PS
• Even if “4:3 PS” is selected, the screen size may become
“4:3 LB” with some DVD VIDEO. This depends on how they
are recorded.
• When you select “16:9 NORMAL” for a picture whose aspect
ratio is 4:3, the picture slightly changes due to the process for
converting the picture width.
¶ PROGRESSIVE MODE
You can select the progressive mode according to the picture
type (film or video source). This takes effect only when
“PROGRESSIVE” is selected as the scanning mode (see
page 14).
Normally, set to “AUTO.”
Select one of the following settings:
PICTURE
MONITOR TYPE
4:3 LB
PROGRESSIVE MODE
AUTO
SCREEN SAVER
ON
MP3 / JPEG
MP3
VIDEO : Suitable for playing back a video source disc.
FILM
: Suitable for playing back a film or progressive
source disc.
AUTO
: Used to play a disc containing both video and film
source materials. This unit recognizes the picture
type (film or video source) of the current disc
according to the disc information.
• If the playback picture is unclear or noisy, or the
oblique lines of the picture are rough, try to change
to other modes.
¶ MONITOR TYPE
You can select the monitor type to match your TV when you
play DVD VIDEO recorded in the picture’s width/height ratio of
16:9.
¶ SCREEN SAVER
You can activate or deactivate the screen saver function.
Select one of the following settings:
ON
: The picture on the TV becomes dark when no
operation is done for 5 minutes.
OFF
: The screen saver function does not work.
51
EN49-58RX-DV5SL[C]4.pm5
51
02.8.5, 5:34 PM
¶ MP3/JPEG
¶ TREBLE
If both MP3 files and JPEG files are recorded on a disc, you can
select which files to play.
Select one of the following settings:
MP3
: Select this for playing MP3 files.
JPEG
: Select this for playing JPEG files.
Adjust the treble tone level from the front speakers within
the range of –10 to +10 in 2 step intervals.
¶ LFE ATT.
The Low Frequency Effect attenuater diminishes the distortion
of the bass sound from the subwoofer while playing back a disc
with Dolby Digital or DTS Digital Surround.
Select one of the following settings:
7 AUDIO menu
–10 dB : Select this to diminish the distortion of the bass
sound from the subwoofer.
AUDIO
L/R BALANCE
English
Choice Menu Operations
CENTER
BASS
0
TREBLE
0
LFE ATT.
0 dB
0 dB
: Select this to cancel this function.
D. RANGE COMPRESSION MID
You can also adjust the following items using the front panel or
remote control (see pages 19 to 24).
¶ L/R BALANCE
Adjust the output balance between the left front speaker and
right front speaker within the range of “R–21” to “CENTER”
or “CENTER” to “L–21.”
¶ BASS
Adjust the bass tone level from the front speakers within the
range of –10 to +10 in 2 step intervals.
¶ D. RANGE COMPRESSION
You can enjoy a powerful sound at night even at a low volume
level when listening to the sound with Dolby Digital.
Select one of the following settings:
MAX
: Select this when you want to apply the compression
effect fully (useful at midnight).
MID
: Select this when you want to reduce the dynamic
range a little.
OFF
: Select this when you want to enjoy surround with its
full dynamic range (no effect applied).
Language code list
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EL
EO
ET
EU
Afar
Abkhazian
Afrikaans
Ameharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
Bhutani
Greek
Esperanto
Estonian
Basque
FA
FI
FJ
FO
FY
GA
GD
GL
GN
GU
HA
HI
HR
HU
HY
IA
IE
IK
IN
IS
IW
JI
JW
KA
KK
KL
Persian
Finnish
Fiji
Faroese
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
KM
KN
KO
KS
KU
KY
LA
LN
LO
LT
LV
MG
MI
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
NL
NO
OC
Cambodian
Kannada
Korean (KOR)
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay (MAY)
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
OM
OR
PA
PL
PS
PT
QU
RM
RN
RO
RU
RW
SA
SD
SG
SH
SI
SK
SL
SM
SN
SO
SQ
SR
SS
ST
(Afan) Oromo
Oriya
Panjabi
Polish
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Rumanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
SU
SV
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
Yoruba
Zulu
52
EN49-58RX-DV5SL[C]4.pm5
52
02.8.5, 5:34 PM
English
Choice Menu Operations
7 SPK. SETTING menu
¶ LEVEL
Select this to enter the LEVEL submenu.
SPK. SETTING
SIZE
LEVEL
LEVEL
DISTANCE
CROSS OVER
100Hz
CENTER SPEAKER
0 dB
LEFT REAR SPEAKER
0 dB
0 dB
RIGHT REAR SPEAKER
RETURN TO INITIAL
SUB WOOFER
–
TEST TONE
RETURN
¶ SIZE
CENTER SPEAKER, LEFT REAR SPEAKER, RIGHT
REAR SPEAKER, and SUB WOOFER
Select this to enter the SIZE submenu.
SIZE
FRONT SPEAKER
LARGE
CENTER SPEAKER
SMALL
REAR SPEAKER
SMALL
SUB WOOFER
NONE
Adjust the speaker output level within the range of –10 dB to
+10 dB for each speaker in 1 step interval.
RETURN
TEST TONE
FRONT SPEAKER, CENTER SPEAKER, and
REAR SPEAKER
Select one of the following settings for each speaker:
LARGE (LRG) : Select this when the speaker size is relatively
large.
SMALL (SML) : Select this when the speaker size is relatively
small.
NONE (NO)
: Select this when you have not connected a
speaker. (Not selectable for the front
speakers)
SUBWOOFER
Select one of the following settings:
USE (YES) : Select this when a subwoofer is connected.
NONE (NO) : Select this when no subwoofer is used.
Select this to start or stop test tone.
RETURN
Select this to return to SPK. SETTING menu.
Notes:
• When “NONE” is selected for the center speaker, rear speakers
and/or subwoofer on the SIZE menu, “–” appears instead of the
current setting. In this case, you cannot adjust the output level
of those speakers.
• You can adjust the output level for center speaker and/or rear
speakers only when one of proper Surround modes are
activated (see page 27).
• When “NONE” is selected for the center and/or rear speakers,
the test tone does not come out of those speakers.
¶ DISTANCE
Select this to enter the DISTANCE submenu.
DISTANCE
RETURN
Select this to return to SPK. SETTING menu.
FRONT SPEAKER
3.0m/10 ft
CENTER SPEAKER
3.0m/10 ft
REAR SPEAKER
3.0m/10 ft
TEST TONE
RETURN
Notes:
• Keep the following comment in mind as reference when
adjusting speaker settings.
– If the size of the cone speaker unit built in your speaker is
greater than 4 3/ 4 inches (12 cm), select “LARGE,” and if it is
smaller than 4 3/ 4 inches (12 cm), select “SMALL.”
• If you have selected “SMALL” for the front speakers, you cannot
select “LARGE” for the center and rear speakers.
• If you have selected “NONE” for subwoofer, you cannot select
“SMALL” for the front speakers.
• You can take advantage of the speaker diagrams on the left
part of the SPK. SETTING menu to set the speaker.
– The speaker diagram for the selected speaker is highlighted.
– The size of the speaker diagram is changed according to
your setting.
Speaker diagrams
FRONT SPEAKER, CENTER SPEAKER, and
REAR SPEAKER
For each speaker, set the distance from the listening point
within the range of 1 ft (0.3 m) to 30 ft (9.0 m), in 1 ft (0.3 m)
interval.
TEST TONE
Select this to start or stop test tone.
RETURN
Select this to return to SPK. SETTING menu.
Front speakers
Notes:
Center speaker
Subwoofer
• When “NONE” is selected for the center speaker and rear
speakers on the SIZE menu, “–” appears instead of the current
setting. In this case, you cannot adjust the speaker distance of
those speakers.
• When “NONE” is selected for the center speaker and/or rear
speakers on the SIZE menu, the test tone does not come out of
those speakers.
Rear speakers
53
EN49-58RX-DV5SL[C]4.pm5
53
02.8.5, 5:34 PM
English
Choice Menu
SettingOperations
DVD preferences
¶ ON SCREEN GUIDE
¶ CROSS OVER
When you use a small speaker in any position, this unit
automatically reallocates the bass sound elements assigned to
the small speaker to the large speakers.
To use this function properly, set this crossover frequency level
according to the size of the smallest speaker connected.
• If you have selected “LRG (large)” or “LARGE” for all
speakers, this function will not take effect.
Select one of the following settings:
You can activate or deactivate the following on-screen guide
icons:
For multi-view angles
:
For plural subtitles
:
For plural audio languages :
For playback status
:
,
,
x5 ,
1/8 ,
etc.
The on-screen guide icons appear on the TV at the beginning of
the playback with this function turned on.
120Hz
: Select this frequency when the cone speaker unit
built in the speaker is about 3 3/16 inches (8 cm).
100Hz
: Select this frequency when the cone speaker unit
built in the speaker is about 3 15/16 inches (10 cm).
When recording the picture with VCR, select “OFF” to avoid
recording the indications above on your video tape.
• The choice menu and on-screen bar can be recorded even
though this function is set to “OFF.”
80Hz
: Select this frequency when the cone speaker unit
built in the speaker is about 4 3/4 inches (12 cm).
Select one of the following settings:
¶ RETURN TO INITIAL
Select this to reset all speaker settings to the initial settings.
ON
: Select this to activate this function.
OFF
: Select this to deactivate it.
• Subtitles (see page 35) and the information for zooming in
(see pages 39 and 40) appear on the display even though this
setting is “OFF.”
7 OTHERS menu
¶ AUTO STANDBY
OTHERS
RESUME
ON
ON SCREEN GUIDE
ON
AUTO STANDBY
OFF
When the playback of the disc on the built-in DVD player ends
and no operation is done for more than the selected time, the
unit is turned off automatically.
• This function takes effect only when DVD is selected as the
source.
PARENTAL LOCK
¶ RESUME
You can activate or deactivate the resume play function of the
built-in DVD player.
Select one of the following settings:
60
: Select this to turn off the unit if no operation is done
within 60 minutes.
30
: Select this to turn off the unit if no operation is done
within 30 minutes.
OFF
: Select this to deactivate it.
Select one of the following settings:
ON
: Select this to activate this function.
OFF
: Select this to deactivate it.
• If Sleep Timer (see page 12) and Auto Standby are used at a
time, one with the early shut-off time will turn off the unit.
¶ PARENTAL LOCK
You can restrict playback of DVD VIDEO containing violent
scenes and those not suitable for your family members.
• You can select “PARENTAL LOCK” only before playback.
Select this to enter the PARENTAL LOCK submenu.
(See pages 55 and 56.)
54
EN49-58RX-DV5SL[C]4.pm5
54
02.8.5, 5:34 PM
English
Choice Menu Operations
5
Restricting Playback by Parental Lock
Press ENTER.
The pop-up window for setting level appears.
You can restrict playback of DVD VIDEO containing violent scenes
and those not suitable for your family members. Nobody can play
such a disc unless this function is canceled.
• This setting takes effect only for the DVD VIDEO containing the
Parental Lock level information—Level 1 (most restrictive) to
Level 8 (least restrictive).
• You can set the Parental Lock only while playback is stopped.
PARENTAL LOCK
COUNTRY CODE
CA
SET LEVEL
NONE 7
____ 6
PASSWORD
ENTER
7 Setting Parental Lock
1
Press CHOICE, then press cursor 3 (or 2) to
display the OTHERS menu.
2
Press cursor ∞ (or 5) repeatedly to move
“PARENTAL LOCK,” then press ENTER.
5
4
3
EXIT
SELECT
6
NONE
8
USE
TO SELECT. USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
Press cursor ∞ (or 5) repeatedly to select the
level of restriction, then press ENTER.
moves to “PASSWORD.”
• The smaller the value of level is, the more restrictive the
Parental Lock level is.
• Select “NONE” to cancel this function.
to
PARENTAL LOCK
COUNTRY CODE
The PARENTAL LOCK submenu appears on the TV.
CA
SET LEVEL
4
PASSWORD
____
EXIT
PARENTAL LOCK
COUNTRY CODE
CA
SET LEVEL
NONE
PASSWORD
____
SELECT
ENTER
NEW PASSWORD? PRESS 0 9KEY.
TO EXIT, PRESS CHOICE.
EXIT
7
SELECT
ENTER
USE
TO SELECT. USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
Press the number buttons (0–9) to enter a four
digit number as your password, then press
ENTER.
moves to “EXIT.”
3
Press cursor ∞ (or 5) repeatedly to move
“COUNTRY CODE,” then press ENTER.
to
The submenu for setting the country code appears.
PARENTAL LOCK
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
SELECT
ENTER
4
CA
CC
NONE CF
_ _ _ _ CG
CH
CI
CK
CA
USE
TO SELECT. USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
8
Press ENTER.
OTHERS menu resumes.
To return to the normal screen
Press CHOICE.
Note:
• Remember your password or make a note of it.
You need to enter your password to change the setting or release
the lock. To change the setting, see page 56.
Press cursor ∞ (or 5) repeatedly to select the
country code, then press ENTER.
See “Country/Area codes list for Parental Lock” on page 57.
moves to “SET LEVEL.”
55
EN49-58RX-DV5SL[C]4.pm5
55
02.8.5, 5:34 PM
English
Choice Menu Operations
7 Changing the setting of Parental Lock
7 Releasing Parental Lock temporarily
1
Press CHOICE, then press cursor 3 (or 2) to
display the OTHERS menu.
When you set a strict parental level, some discs may not be played
back at all. When you load such a disc and try to play it, the
following display appears on the TV. You can release Parental Lock
temporarily.
2
Press cursor ∞ (or 5) repeatedly to move
“PARENTAL LOCK,” then press ENTER.
PARENTAL LOCK
to
TEMPORARY RELEASE
NOT RELEASE
PASSWORD
The PARENTAL LOCK submenu appears on the TV.
• You can only move
to “PASSWORD” or to “EXIT” before
you enter your password.
SELECT
____
PASSWORD? ••• PRESS 0 ~ 9 KEY
ENTER
PARENTAL LOCK
COUNTRY CODE
CA
LEVEL
4
PASSWORD
____
1
moves to “PASSWORD.”
• If you do not want to release Parental Lock temporarily, select
“NOT RELEASE” by pressing cursor ∞ (or 5), then press
ENTER. To eject the disc, press 0.
EXIT
SELECT
ENTER
3
PASSWORD? PRESS 0 9KEY.
TO EXIT, PRESS CHOICE.
Press the number buttons (0–9) to enter your
password, then press ENTER.
• If you enter a wrong password, “WRONG! RETRY••• PRESS
0~9KEY” appears on the PARENTAL LOCK submenu.
You cannot go to next steps before you enter the correct
password.
4
Press cursor ∞ (or 5) repeatedly to move
to
the item you want to change, then press ENTER.
5
Press cursor ∞ (or 5) repeatedly to change the
setting, then press ENTER.
6
Press the number buttons (0–9) to enter your
password, then press ENTER.
Press cursor ∞ (or 5) repeatedly to move
to
“TEMPORARY RELEASE”, then press ENTER.
2
Press number buttons (0–9) to enter your
password, then press ENTER.
Playback starts.
• If you enter a wrong password, “WRONG! RETRY••• PRESS
0~9KEY” appears on the PARENTAL LOCK submenu.
You cannot play the disc before you enter the correct
password.
Note:
• When you enter wrong passwords more than three times,
moves to “NOT RELEASE” automatically and cursor ∞ (or 5) does
not work. Press 0 to remove the disc.
The new setting is stored.
Notes:
• You cannot set the Parental Lock before you set your password.
• If you go out of the PARENTAL LOCK submenu before setting your
password in step 6, the new country code and parental level will not
become effective, and the old country code and parental level
remain effective.
• When you enter wrong passwords more than three times,
moves to “EXIT” automatically and cursor ∞ (or 5) does not work.
Press ENTER to exit from the PARENTAL LOCK submenu, then
start from step 1 again.
• If you forget your password, enter “8888.”
56
EN49-58RX-DV5SL[C]4.pm5
56
02.8.5, 5:34 PM
English
Choice
Menu
Setting
DVDOperations
preferences
Country/Area codes list for Parental Lock
AD
AE
AF
AG
AI
AL
AM
AN
AO
AQ
AR
AS
AT
AU
AW
AZ
BA
BB
BD
BE
BF
BG
BH
BI
BJ
BM
BN
BO
BR
BS
BT
BV
BW
BY
BZ
CA
CC
CF
CG
CH
CI
CK
CL
CM
CN
CO
CR
CU
CV
CX
CY
CZ
DE
DJ
DK
DM
DO
DZ
EC
EE
EG
EH
Andorra
United Arab Emirates
Afghanistan
Antigua and Barbuda
Anguilla
Albania
Armenia
Netherlands Antilles
Angola
Antarctica
Argentina
American Samoa
Austria
Australia
Aruba
Azerbaijan
Bosnia and Herzegovina
Barbados
Bangladesh
Belgium
Burkina Faso
Bulgaria
Bahrain
Burundi
Benin
Bermuda
Brunei Darussalam
Bolivia
Brazil
Bahamas
Bhutan
Bouvet Island
Botswana
Belarus
Belize
Canada
Cocos (Keeling) Islands
Central African Republic
Congo
Switzerland
Côte d’Ivoire
Cook Islands
Chile
Cameroon
China
Colombia
Costa Rica
Cuba
Cape Verde
Christmas Island
Cyprus
Czech Republic
Germany
Djibouti
Denmark
Dominica
Dominican Republic
Algeria
Ecuador
Estonia
Egypt
Western Sahara
ER
ES
ET
FI
FJ
FK
FM
FO
FR
FX
GA
GB
GD
GE
GF
GH
GI
GL
GM
GN
GP
GQ
GR
GS
GT
GU
GW
GY
HK
HM
HN
HR
HT
HU
ID
IE
IL
IN
IO
IQ
IR
IS
IT
JM
JO
JP
KE
KG
KH
KI
KM
KN
KP
KR
KW
KY
KZ
Eritrea
Spain
Ethiopia
Finland
Fiji
Falkland Islands (Malvinas)
Micronesia
(Fedelated States of)
Faroe Islands
France
France, Metropolitan
Gabon
United Kingdom
Grenada
Georgia
French Guiana
Ghana
Gibraltar
Greenland
Gambia
Guinea
Guadeloupe
Equatorial Guinea
Greece
South Georgia and the
South Sandwich Islands
Guatemala
Guam
Guinea-Bissau
Guyana
Hong Kong
Heard Island and
McDonald Islands
Honduras
Croatia
Haiti
Hungary
Indonesia
Ireland
Israel
India
British Indian Ocean
Territory
Iraq
Iran (Islamic Republic of)
Iceland
Italy
Jamaica
Jordan
Japan
Kenya
Kyrgyzstan
Cambodia
Kiribati
Comoros
Saint Kitts and Nevis
Korea, Democratic
People’s Republic of
Korea, Republic of
Kuwait
Cayman Islands
Kazakhstan
LA
LB
LC
LI
LK
LR
LS
LT
LU
LV
LY
MA
MC
MD
MG
MH
ML
MM
MN
MO
MP
MQ
MR
MS
MT
MU
MV
MW
MX
MY
MZ
NA
NC
NE
NF
NG
NI
NL
NO
NP
NR
NU
NZ
OM
PA
PE
PF
PG
PH
PK
PL
PM
PN
PR
PT
PW
PY
QA
RE
RO
RU
Lao People’s
Democratic Republic
Lebanon
Saint Lucia
Liechtenstein
Sri Lanka
Liberia
Lesotho
Lithuania
Luxembourg
Latvia
Libyan Arab Jamahiriya
Morocco
Monaco
Moldova, Republic of
Madagascar
Marshall Islands
Mali
Myanmar
Mongolia
Macau
Northern Mariana Islands
Martinique
Mauritania
Montserrat
Malta
Mauritius
Maldives
Malawi
Mexico
Malaysia
Mozambique
Namibia
New Caledonia
Niger
Norfolk Island
Nigeria
Nicaragua
Netherlands
Norway
Nepal
Nauru
Niue
New Zealand
Oman
Panama
Peru
French Polynesia
Papua New Guinea
Philippines
Pakistan
Poland
Saint Pierre and Miquelon
Pitcairn
Puerto Rico
Portugal
Palau
Paraguay
Qatar
Réunion
Romania
Russian Federation
57
EN49-58RX-DV5SL[C]4.pm5
57
02.8.5, 5:34 PM
RW
SA
SB
SC
SD
SE
SG
SH
SI
SJ
SK
SL
SM
SN
SO
SR
ST
SV
SY
SZ
TC
TD
TF
TG
TH
TJ
TK
TM
TN
TO
TP
TR
TT
TV
TW
TZ
UA
UG
UM
US
UY
UZ
VA
VC
VE
VG
VI
VN
VU
WF
WS
YE
YT
YU
ZA
ZM
ZR
ZW
Rwanda
Saudi Arabia
Solomon Islands
Seychelles
Sudan
Sweden
Singapore
Saint Helena
Slovenia
Svalbard and Jan Mayen
Slovakia
Sierra Leone
San Marino
Senegal
Somalia
Suriname
Sao Tome and Principe
El Salvador
Syrian Arab Republic
Swaziland
Turks and Caicos Islands
Chad
French Southern Territories
Togo
Thailand Code Language
Tajikistan
Tokelau
Turkmenistan
Tunisia
Tonga
East Timor
Turkey
Trinidad and Tobago
Tuvalu
Taiwan
Tanzania, United
Republic of
Ukraine
Uganda
United States Minor
Outlying Islands
United States
Uruguay
Uzbekistan
Vatican City State
(Holy See)
Saint Vincent and the
Grenadines
Venezuela
Virgin Islands (British)
Virgin Islands (U.S.)
Viet Nam
Vanuatu
Wallis and Futuna Islands
Samoa
Yemen
Mayotte
Yugoslavia
South Africa
Zambia
Zaire
Zimbabwe
Aspect ratio
English
Glossary for DVD Player
Multichannel
The ratio of vertical and horizontal sizes of a displayed image. The
horizontal vs. vertical ratio of conventional TVs is 4:3 and that of
wide-screen TVs is 16:9.
Chapter
DVD VIDEO has been designed to have each soundtrack constitute
one sound field. Multichannel refers to a structure of sound tracks
having three or more channels.
Multilanguage
The smallest division on DVD VIDEO. It is a division of a title and
similar to a track for CD or VCD.
Component video signal
A video signal system where parts of information necessary for
reproducing image signal comprised of the three primary colors of
light are transmitted via separate signal lines. Types of signal, such
as R/G/B, Y/PB/PR, etc., are available.
Composite video signal
A video signal comprised of three kinds of signals combined: an
image signal made up of luminance and chrominance signals using
the frequency multiplication technique, burst signal providing the
basis for color reproduction, and synchronization signal.
Disc menu
A screen display prepared for allowing selection of images, sounds,
subtitles, multi-angle, etc. recorded on DVD VIDEO.
Interlaced scanning
In the conventional video system, a picture is shown on the display
monitor in two halves. The Interlaced scanning system places lines
of the second half of the picture in-between lines of the first half of
the picture.
JPEG
A still-picture data compression system proposed by the Joint
Photographic Expert Group, which features little distortion in image
quality in spite of its high compression ratio.
Letter box
A method of displaying wide images like movies in on a 4:3 TV
screen with no part of the image deleted by placing black bands on
the top and bottom of the screen. This name has derived from the
screen form looking literally like a letter box.
Linear PCM (PCM: Pulse Code Modulation)
A system for converting analog sound signal to digital signal for
later processing with no data compression used in conversion.
When a title is created to cope with multiple languages, it is
generally called a multilanguage title.
Parental Lock
A feature of this system to automatically determine whether or not
to reproduce particular DVD VIDEO software by comparing its
parental level (a measure of undesirability of scenes, etc. from
educational viewpoint) set for the software beforehand with that set
on this system by the user; if the software’s level is less restrictive
than the user-set level, it will be reproduced.
Playback control (PBC)
Refers to the signal recorded on VCD/SVCD for controlling
reproduction. By using menu screens recorded on VCD/SVCD that
supports PBC, you can enjoy interactive-type software as well as
software having a search function.
Progressive scanning
By progressive scanning, all the horizontal lines of a picture are
displayed at one time as a single frame. This system can convert the
interlaced video from DVD VIDEO into progressive format for
connection to a progressive TV. It dramatically increases the vertical
resolution.
Region code
A system for allowing discs to be played back only in the regions
designated beforehand. All the countries in the world are divided
into six regions and each region is identified by a specified region
code (or region number). If the region code of a disc matches that of
a player, the player can play back the disc.
Sampling frequency
Frequency of sampling data when analog data is converted to digital
data. Sampling frequency numerically represents how many times
the original analog signal is sampled per second.
Surround
A system for creating three-dimensional sound fields full of realism
by arranging multiple speakers around the listener.1
Transfer rate
MP3
A file format with a sound data compression system. “MP3” is the
abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio
Layer 3. By using MP3 format, one CD-R or CD-RW can contain
about 10 times as much data volume as a regular CD can.
The rate of transferring digital data. Usually the measure is in bit per
second (bps). The DVD system applies a variable transfer rate
system for high efficiency.
Multi-angle
By recording multiple scenes progressing at the same time in a
single title, the user can select view angles. This feature is called the
multi-angle function.
58
EN49-58RX-DV5SL[C]4.pm5
58
02.8.5, 5:34 PM
English
AV COMPU LINK Remote Control System
The AV COMPU LINK remote control system allows you to operate JVC’s video components (TV and VCR) through the unit.
This unit is equipped with the AV COMPU LINK-III, which has added a function to operate JVC’s video components through the video
components terminals. To use this remote control system, you need to connect the video components you want to operate, following the
diagrams below and the procedures on page 60.
• Refer also to the manuals supplied with your video components.
CONNECTIONS 1: AV COMPU LINK Connection
VCR
TV
CAUTION:
When connecting the TV with the
AV COMPU LINK remote control
system, connect the unit to the
AV COMPU LINK III or
AV COMPU LINK EX terminal.
DO NOT connect the unit to the
AV COMPU LINK RECEIVER/
AMP terminal.
AV
COMPU LINK
AV
COMPU LINK III
AV COMPU LINK-
AV
COMPU LINK EX
Notes:
• When connecting the unit and a TV with the AV COMPU LINK EX terminal by using a component video cable, you cannot use Automatic
Selection of TV’s Input Mode (see page 60).
• When connecting the VCR only to this unit, connect it directly to the unit using cables with the monaural mini-plugs.
CONNECTIONS 2: Video Cable Connection
This unit is equipped with three types of the video terminals—composite video, S-video, and component video, and the signals coming into
this unit through one type of video terminals can output only through the terminal of the same type. So you need to connect the VCR and TV
to this unit using one of the following two ways—CASE 1 or 2:
• When using the AV COMPU LINK remote control system, set the component video input correctly (see “Video output mode” on
page 22); otherwise, the correct input for this unit will not be selected on the TV.
CASE 1
When connecting the source equipment to the unit through the S-video terminals, connect this unit to the
TV’s Video Input 1 terminal using S-video cables.
Source
Equipment
S-video cable
RX-DV5SL
TV
S-video cable
To Video Input 1
CASE 2
When connecting the source equipment to the unit through the composite video terminals, connect this
unit to the TV’s Video Input 2 terminal (composite video input) using composite video cables.
Source
Equipment
Composite
video cable
RX-DV5SL
TV
Composite
video cable
To Video Input 2
CASE 3
When setting the video output mode of the built-in DVD player to “component,” connect this unit to the
TV’s Video Input 2 terminals (component video input) using component video cables.
RX-DV5SL
TV
Component
video cable
To Video Input 2
59
EN59-70RX-DV5SL[C]4.pm5
59
02.8.5, 5:34 PM
1. If you have already plugged your VCR, TV, and
this unit into the AC outlets, unplug their AC
power cords first.
2. Connect your VCR, TV, and this unit following
“CONNECTIONS 1” on the previous page, using
the cables with the monaural mini-plugs (not
supplied).
3. Connect the audio input/output jacks on VCR,
TV, and this unit using the audio cords.
• See pages 7 to 9.
4. Connect the video input/output jacks on VCR,
TV and this unit following “CONNECTIONS 2”
on the previous page, using the composite video
cord, with S-video plug or with component video
plugs.
5. Plug the AC power cords of the components into
the AC outlets.
6. When turning on the TV for the first time after
the AV COMPU LINK connection, turn the TV
volume to the minimum using the TV volume
control on the TV.
7. Turn on other connected components first, then
turn on this unit.
• When turning on the VCR, use the remote control supplied
with this unit—press
STANDBY/ON VCR.
The AV COMPU LINK remote control system allows you to use the
five basic functions listed below.
Remote Control of the TV and VCR Using This
Remote Control
English
AV COMPU LINK Remote Control System
One-Touch DVD Play
Simply by starting playback on the built-in DVD player, you can
enjoy the playback without setting other switches manually.
The TV automatically turns on and changes the input mode to the
appropriate position so that you can view the playback picture.
Automatic Selection of TV’s Input Mode
• When you select TV as the source to play on the unit, the TV
automatically changes the input mode to the TV tuner so that you
can watch TV.
• When you select DVD, VCR, or DBS as the source to play on the
unit, the TV automatically changes the input mode to the
appropriate position so that you can view the playback picture.
Notes:
• When connecting a TV with the AV COMPU LINK EX terminal to
this unit, you cannot use a component video cable (as CASE 3 on
the previous page).
• When you select TV as the source on the unit, you cannot see the
menu on the TV screen since the AV COMPU LINK remote control
system automatically changes the TV’s input mode to the TV tuner.
If you do not mind stopping listening to the TV sounds, you can
then show the on-screen menu after changing the TV’s input mode
to the appropriate position the unit is connected to.
Automatic Power On/Off
The TV and VCR turn on and off along with the unit.
When you turn on the unit;
• If the previously selected source is VCR, the TV and VCR will
turn on automatically.
• If the previously selected source is TV or DVD, only the TV will
turn on automatically.
When you turn off the unit, the TV and VCR will turn off.
Note:
• If you turn off the unit while recording on the VCR, the VCR will not
turn off, but continue recording.
For details, see page 62.
• Aim the remote control directly at the remote sensor on each
target component.
One-Touch Video Play
Simply by inserting a video cassette without its safety tab into the
VCR, you can enjoy the video playback without setting other
switches manually. The unit automatically turns on and changes the
source to VCR.
The TV automatically turns on and changes the input mode to the
appropriate position so that you can view the playback picture.
When you insert a video cassette with its safety tab, press the play
(3) button on the VCR or on the remote control. You can get the
same result.
60
EN59-70RX-DV5SL[C]4.pm5
60
02.8.5, 5:34 PM
English
Operating JVC’s Audio/Video Components
You can operate JVC’s audio and video components with this unit’s remote control, since control signals for JVC’s components are preset in the
remote control.
Operating Audio Components
To operate JVC’s audio components using this remote control
• Aim the remote control directly at the remote sensor on the unit.
• To operate a source with the remote control, the source must be
selected using the source selecting buttons on the remote control.
• Refer also to the manuals supplied with your components.
7
7
CD recorder
After pressing CDR, you can perform the following operations on a CD
player and a CD recorder:
TV
TAPE
CDR
FM/AM
DBS
VCR
DVD
REPEAT
SLEEP
FM MODE
Sound control section (Amplifier)
1
TEST
CENTER
INPUT
4
2
ANALOG
/DIGITAL
TEST
INPUT
4
7
SUBTITLE SURR MODE
10/0
3
5
6
REAR·R
8
9
– SUBWOOFER +
VFP
+10
10/0
100
9
– SUBWOOFER +
VFP
+10
100+
5
7
6
3
REAR·L
SUBTITLE SURR MODE
REAR·R
8
2
AUDIO SURR ON/OFF
REAR·L
AUDIO SURR ON/OFF
CENTER
1
TV/DBS CH +
ANALOG
/DIGITAL
TV RETURN
SURR ON/OFF
: Turns on or off the Surround modes—
Dolby Digital, DTS Digital Surround, and
Dolby Pro Logic II.
SURR MODE
: Selects the Surround modes.
TEST
: Turns on or off the test tone output.
CENTER + or –
: Adjusts the center speaker channel output
level.
REAR•L + or –
: Adjusts the left rear speaker channel
output level.
REAR•R + or –
: Adjusts the right rear speaker channel
output level.
SUBWOOFER + or – : Adjusts subwoofer channel output level.
EFFECT
: Selects the effect level.
STROBE
– TV/DBS CH +
CONTROL EFFECT
After pressing CONTROL repeatedly to show “SOUND” on the
operation mode display, you can perform the following operations:
CONTROL EFFECT
9/FF
TV/VIDEO REW/( TUNING/GROUP
TV RETURN
3
4
: Starts playing.
: Returns to the beginning of the current (or previous)
track.
¢
: Skips to the beginning of the next track.
7
: Stops playing.
8
: Pauses playing. To release it, press 3.
1 – 10, +10 : Selects a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
Note:
• When you start recording on the CD recorder, use the buttons on
the CD recorder itself or on the remote control supplied with it.
7
Tuner
You can always perform the following operations:
Note:
• After adjusting sounds, press the source selecting button to operate
your target source by using number buttons; otherwise, number
buttons cannot be used for operating your target source.
TV
TAPE
CDR
FM/AM
DBS
VCR
DVD
TV/VIDEO REW/( TUNING/GROUP
REPEAT
SLEEP
FM MODE
9/FF
STROBE
– TV/DBS CH +
CENTER
CONTROL EFFECT
1
ANALOG
/DIGITAL
TEST
INPUT
4
2
5
7
10/0
FM/AM
6
REAR·R
AUDIO SURR ON/OFF
SUBTITLE SURR MODE
3
REAR·L
8
9
– SUBWOOFER +
VFP
+10
: Tunes into the last selected FM or AM station.
• Each time you press the button, the band changes between FM and
AM alternately.
After pressing FM/AM, you can perform the following operations on
a tuner:
1 – 10, +10
: Selects a preset channel number directly.
For channel number 5, press 5.
For channel number 15, press +10, then 5.
For channel number 20, press +10, then 10.
TUNING 9 or ( : Tunes into stations.
FM MODE
: Changes the FM reception mode.
61
EN59-70RX-DV5SL[C]4.pm5
61
02.8.5, 5:34 PM
Operating Video Components
7
English
Operating JVC’s Audio/Video Components
VCR
You can always perform the following operations:
To operate JVC’s video components using this remote control
• You need to connect JVC’s video components through the
AV COMPU LINK-III jacks (see page 59) in addition to the
audio/video connections (see pages 7 to 10).
• Some JVC’s VCRs can accept two types of the control signals—
remote codes “A” and “B.” Before using this remote control, make
sure that the remote control code of the connected VCR is set to
code “A.”
• To operate the video component(s) using the remote control, aim
the remote control directly at the remote sensor on each
component, not on this unit.
STANDBY/ON
DBS
VCR
TV
AUDIO
TV
TAPE
CDR
FM/AM
DBS
VCR
DVD
REPEAT
SLEEP
FM MODE
CENTER
CONTROL EFFECT
1
2
ANALOG
/DIGITAL
TEST
INPUT
4
6
REAR·R
8
7
TV
3
REAR·L
5
SUBTITLE SURR MODE
10/0
You can always perform the following operations:
STROBE
– TV/DBS CH +
AUDIO SURR ON/OFF
7
9/FF
TV/VIDEO REW/( TUNING/GROUP
9
– SUBWOOFER +
VFP
+10
100+
STANDBY/ON VCR
TV RETURN
: Turns on or off the VCR.
STANDBY/ON
DBS
VCR
TV
AUDIO
TV
TAPE
CDR
FM/AM
DBS
VCR
DVD
TV/VIDEO REW/( TUNING/GROUP
REPEAT
SLEEP
FM MODE
9/FF
STROBE
– TV/DBS CH +
CENTER
CONTROL EFFECT
1
ANALOG
/DIGITAL
TEST
INPUT
4
2
5
7
10/0
6
REAR·R
AUDIO SURR ON/OFF
SUBTITLE SURR MODE
3
REAR·L
8
9
After pressing VCR, you can perform the following operations on a
VCR:
1 – 9, 0
: Selects the TV channels on a VCR.
For channel number 5, press 5.
For channel number 10, press 1, then 0.
For channel number 23, press 2, then 3.
3
: Starts playing.
REW
: Rewinds a tape.
FF
: Fast-winds a tape.
7
: Stops operations.
8
: Pauses playing. To release it, press 3.
– SUBWOOFER +
VFP
+10
100+
TV RETURN
PROGRESSIVE
DIMMER
ANGLE
+
+
PAGE
MUTING TV VOL
ZOOM
–
–
+
VOLUME
–
STANDBY/ON TV : Turns on or off the TV.
TV VOL + or –
: Adjusts the volume.
TV/VIDEO
: Sets the input mode (either TV or
VIDEO).
After pressing TV, you can perform the following operations on a TV:
TV/DBS CH + or –
: Changes the channels.
1 – 9, 0, 100+
: Selects the channels.
For channel number 5, press 5.
For channel number 10, press 1, then 0.
For channel number 23, press 2, then 3.
For channel number 135, press 100+, 3,
then 5.
TV RETURN
: Alternates between the previously
selected channel and the current
channel.
62
EN59-70RX-DV5SL[C]4.pm5
62
02.8.5, 5:34 PM
English
Operating Other Manufacturers’ Equipment
This remote control supplied with the unit can transmit control signals for other manufacturers’ TVs, DBS tuners, and VCRs.
By changing the transmittable signals from preset ones to other manufacturers’, you can operate other manufacturers’ components using this
remote control.
Changing the Preset Signal Codes
Notes:
To operate other manufacturers’ equipment using this remote
control
• Aim the remote control directly at the remote sensor on each
equipment.
• To operate a source with the remote control, the source must be
selected using source selecting buttons on the remote control.
• Refer also to the manuals supplied with your equipment.
7
To change the transmittable signals for
operating other manufacturers’ TV
1. Press and hold
STANDBY/ON TV.
2. Press TV.
TV
3. Enter the manufacturer’s code
using the number buttons
(1–9, 0).
See the right to find the code.
VCR
TV
AUDIO
TAPE
CDR
FM/AM
DBS
VCR
DVD
CENTER
EFFECT
1
2
TEST
4
7
SURR MODE
10/0
3
REAR·L
5
6
REAR·R
SURR ON/OFF
8
9
– SUBWOOFER +
+10
100+
4. Release
STANDBY/ON TV.
You can perform the following operations on the TV:
STANDBY/ON TV : Turns on or off the TV.
TV VOL + or –
: Adjusts the volume.
TV/VIDEO
: Sets the input mode (either TV or
VIDEO).
After pressing TV, you can perform the following operations on
a TV:
TV/DBS CH + or –
1 – 9, 0, 100+
5. Try to operate your TV by pressing
STANDBY/ON TV.
When your TV turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of TV,
try each one until the correct one is entered.
STANDBY/ON
DBS
• Refer also to the manual supplied for your TV.
• All the functions listed on the left may not be assigned to the
buttons for some TVs.
• If you cannot change the channels of some TVs by pressing
the number buttons, press TV/DBS CH + or – for changing the
channels.
: Changes the channels.
: Selects the channels.
For channel number 5, press 5.
For channel number 10, press 1, then 0.
For channel number 23, press 2, then 3.
For channel number 135, press 100+,
3, then 5.
TV RETURN will function as the
ENTER button if your equipment
requires pressing ENTER after
selecting a channel number.
Manufactures’ codes for TV
Manufacturer
Codes
JVC
00*, 02, 13, 14, 47, 74
Akai
01, 02
Blaupunkt
03, 04
Fisher
01, 05
Grundig
03, 06, 07
Hitachi
08 – 10, 49
Iraddio
02
Itt/Nokia
11, 12
Loewe
06, 15, 16
Magnavox
08, 17, 49
Mets
50 – 53
Mitsubishi
08, 18 – 20
Mivar
21
Nordmende
22, 23
Okano
15
Panasonic
24 – 27, 76
Philips
15, 17, 28, 75
Quelle
52 – 67
RCA/PROSC
08, 24, 29 – 31, 48
SABA
32, 33, 68 – 70
Samsung
06, 08, 16, 34, 35, 49
Sanyo
01, 05
Schneider
02, 15, 36
Sharp
37, 38, 77
Sony
39
Telefunken
40 – 42, 69
Thomson
71, 72
Toshiba
37, 43, 44
Zenith
45, 46
*“00” is the initial JVC code.
Note:
• Manufacturers’ codes are subject to change without notice. If
they are changed, this remote control cannot operate the
equipment.
63
EN59-70RX-DV5SL[C]4.pm5
63
02.8.5, 5:34 PM
7
To change the transmittable signals for
operating other manufacturers’ DBS tuner
1. Press and hold
STANDBY/ON DBS.
2. Press DBS.
STANDBY/ON
DBS
VCR
TV
AUDIO
TV
TAPE
CDR
FM/AM
DBS
VCR
DVD
3. Enter the manufacturer’s code
using the number buttons
(1–9, 0).
See to the right to find the code.
CENTER
EFFECT
1
2
TEST
4
5
7
10/0
6
REAR·R
SURR ON/OFF
SURR MODE
3
REAR·L
8
9
– SUBWOOFER +
+10
100+
4. Release
STANDBY/ON DBS.
STANDBY/ON DBS : Turns on or off the DBS tuner.
After pressing DBS, you can perform the following operations
on a DBS tuner:
TV/DBS CH + or – : Changes the channels.
1 – 9, 0, 100+
: Selects the channels.
For channel number 5, press 5.
For channel number 10, press 1, then 0.
For channel number 23, press 2, then 3.
For channel number 135, press 100+, 3,
then 5.
TV RETURN will function as the
ENTER button if your equipment
requires pressing ENTER after selecting a
channel number.
English
Operating Other Manufacturers’ Equipment
Manufactures’ codes for DBS tuner
Manufacturer
JVC
Amstrad
Blaupunkt
Echostar
General Instrument
Goldstar
Grundig
Hamlin/Re
Hirshmann
Instrument
Itt/Nokia
Jerrold/G
Kathrein
NEC
Oak
Orbitech
Panasonic
Philips
Pioneer
RCA
Samsung
Schwaiger
Scientiff
Siemens
Sony
Technisat
Tocom
Zenith
Codes
56, 57*, 67
43 – 49
30
50, 51, 67
29
31
32, 33
01 – 05
48, 52 – 55
68
34
06 – 14
52, 58 – 63
35, 36
15 – 17
48
18 – 20
37, 38
21, 22
65
39, 40
61, 64
23 – 25
41, 42
66
48
26
27, 28
*“57” is the initial JVC code.
Note:
• Manufacturers’ codes are subject to change without notice. If
they are changed, this remote control cannot operate the
equipment.
Note:
• Refer also to the manual supplied for your DBS tuner.
5. Try to operate your DBS tuner by pressing
STANDBY/ON DBS.
When your DBS tuner turns on or off, you have entered the
correct code.
If there are more than one code listed for your brand of DBS
tuner, try each one until the correct one is entered.
64
EN59-70RX-DV5SL[C]4.pm5
64
02.8.5, 5:34 PM
English
Operating Other Manufacturers’ Equipment
7
To change the transmittable signals for
operating other manufacturers’ VCR
1. Press and hold
STANDBY/ON VCR.
2. Press VCR.
Manufactures’ codes for VCR
STANDBY/ON
DBS
TV
3. Enter the manufacturer’s code
using the number buttons (1–9, 0).
VCR
TV
TAPE
CDR
FM/AM
DBS
VCR
DVD
CENTER
EFFECT
1
2
TEST
5
7
10/0
6
REAR·R
SURR ON/OFF
SURR MODE
3
REAR·L
4
See the right to find the code.
AUDIO
8
9
– SUBWOOFER +
+10
100+
4. Release
STANDBY/ON VCR.
STANDBY/ON VCR : Turns on or off the VCR.
After pressing VCR, you can perform the following operations
on a VCR:
1 – 9, 0 : Selects the TV channels on a VCR.
For channel number 5, press 5.
For channel number 10, press 1, then 0.
For channel number 23, press 2, then 3.
3
REW
FF
7
8
:
:
:
:
:
TV RETURN will function as the ENTER button if
your equipment requires pressing ENTER after
selecting a channel number.
Starts playing.
Rewinds a tape.
Fast-winds a tape.
Stops operations.
Pauses playing. To release it, press 3.
Manufacturer
JVC
Aiwa
Bell & Howell
Blaupunkt
CGM
Emerson
Fisher
Funai
GE
Goldstar
Goodmans
Grundig
Hitachi
Loewe
Magnavox
Mitsubishi
NEC
Nokia
Nordmende
Orion
Panasonic
Philips
Phonola
RCA/PROSC
SABA
Samsung
Sanyo
Sharp
Siemens
Sony
Telefunken
Toshiba
Zenith
*“00” is the initial JVC code.
Note:
• Manufacturers’ codes are subject to change without notice. If
they are changed, this remote control cannot operate the
equipment.
Note:
• Refer also to the manual supplied for your VCR.
5. Try to operate your VCR by pressing
STANDBY/ON VCR.
When your VCR turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of
VCR, try each one until the correct one is entered.
65
EN59-70RX-DV5SL[C]4.pm5
65
Codes
00*, 26 – 29, 58
01, 02
03
04, 05
06, 07
08, 10 – 12, 64, 65
03, 14 – 17
01
18 – 20
07
13, 21
06, 22
18, 23 – 25, 66
07, 21
04, 19, 24
30 – 35
26, 27
03, 36
38
09
19, 24, 39, 40
04, 19, 21, 24, 41, 42
21
04, 18, 19, 23, 24, 43 – 45
38, 46
45, 47, 59, 61 – 63
03, 48, 49
37, 50
03, 51
52 – 54
55, 60
43, 44
56, 57
02.8.5, 5:34 PM
English
Maintenance
To get the best performance of the system, keep your discs and mechanism clean.
General Notes
Cleaning Discs
In general, you will have the best performance by keeping your discs
and mechanism clean.
• Store discs in their cases, and keep them in cabinets or on shelves.
Wipe the disc with a soft cloth in a straight line from center to edge.
Handling Discs
• Remove the disc from its case by holding it at the edge while
pressing the center hole lightly.
• Do not touch the shiny surface of the disc, or bend the disc.
• Put the disc back in its case after use to prevent warping.
DO NOT use any solvent—such as conventional record
cleaner, spray, thinner, or benzine—to clean the disc.
Cleaning the Unit
• Be careful not to scratch the surface of the disc when placing it
back in its case.
• Avoid exposure to direct sunlight, temperature extremes, and
moisture.
• Stains on the unit
Should be wiped off with a soft cloth. If the unit is heavily stained,
wipe it with a cloth soaked in water-diluted neutral detergent and
wrung well, then wipe clean with a dry cloth.
• Since the unit may deteriorate in quality, become damaged or get
its paint peeled off, be careful about the following.
— DO NOT wipe it with a hard cloth.
— DO NOT wipe it strong.
— DO NOT wipe it with thinner or benzine.
— DO NOT apply any volatile substances such as insecticides to it.
— DO NOT allow any rubber or plastic to remain in contact with
it for a long time.
66
EN59-70RX-DV5SL[C]4.pm5
66
02.8.5, 5:34 PM
English
Troubleshooting
Use this chart to help you solve daily operational problems. If there is any problem you cannot solve, contact your dealer.
7
Genaral
PROBLEM
POSSIBLE CAUSE
SOLUTION
The power does not come on.
The power cord is not plugged in.
Plug the power cord into an AC outlet.
No sound from speakers.
Speaker signal cables are not
connected.
Check speaker wiring and reconnect if
necessary.
The audio cable is not connected
properly.
Connect the cord properly (see pages 7 to
10).
An incorrect source is selected.
Select the correct source.
Muting is activated.
Press MUTING to cancel the muting.
An incorrect input mode (analog or
digital) is selected.
Select the correct input mode (analog or
digital).
Connections are incorrect.
Check connections.
The balance is set to one extreme.
Adjust the balance properly (see pages 24 or
52).
Speakers are overloaded because of
high volume.
STANDBY/ON on the front
1. Press
panel to turn off the unit.
Sound from one speaker only.
“OVERLOAD” starts flashing on the
display.
2. Stop the playback source.
3. Turn on the unit again, and adjust the
volume.
Speakers are overloaded because of
short circuit of speaker terminals.
Press
STANDBY/ON on the front panel
to turn off the unit, then check the speaker
wiring.
If “OVERLOAD” does not disappear,
unplug the AC power cord, then plug it back
again.
If speaker wiring is not short-circuited,
contact your dealer.
The STANDBY lamp lights up after
turning on the power, but soon the unit
turns off (into standby mode).
The unit is overloaded because of a
high voltage.
Press
STANDBY/ON on the front panel
to turn off the unit. After unplugging the
power cord, consult your dealer.
Remote control does not operate as you
intend.
The remote control is not ready for
your intended operation.
Press CONTROL (see page 24) or a source
selecting button first, then press the buttons
you want to use.
Remote control does not work.
It is too far from the unit, or is not
facing the unit.
Come closer to the unit. Operate the remote
control within 23 ft (7 m) from the unit.
There is an obstruction hiding the
remote sensor on the unit.
Remove the obstruction.
The remote control is not aimed at the
remote sensor on the unit or
components.
Aim the remote control at the remote sensor
on each component you want to operate.
The batteries have been inserted into
the wrong way round (+/–).
Insert the batteries correctly.
Batteries are weak.
Replace batteries.
The remote control signals are not set
correctly.
Enter the correct manufacturers’ code (see
pages 63 to 65).
67
EN59-70RX-DV5SL[C]4.pm5
67
02.8.5, 5:34 PM
7
English
Troubleshooting
For DVD Player
PROBLEM
No picture is displayed on the TV.
POSSIBLE CAUSE
SOLUTION
The video cord is not connected
correctly.
Connect the cord correctly (see pages 8 and
9).
TV input selection is incorrect.
Select the correct input on the TV.
The disc is not playable.
Replace the disc (see page 29).
No picture is displayed on the TV
screen, the picture is blurred, or the
picture is divided into two parts.
The scanning mode is set to
“PROGRESSIVE” though the unit is
connected to the TV which does not
support the progressive video input,
such as a conventional TV.
Change the scanning mode to
“INTERLACE” (see page 14).
No sound is heard and “NO AUDIO”
appears on the display.
The loaded disc may be illegally
copied.
Consult with the disc vendor.
A disc cannot be played.
The unit’s and disc’s Region Code
numbers are incompatible.
Replace the disc (see page 29).
Parental Lock is in use.
Enter your password to change the parental
level (see pages 55 and 56).
The disc is loaded with its label and
data sides inverted.
Insert the disc correctly (see page 15).
The unplayable disc is loaded.
Replace the disc (see page 29).
The disc is scratched or dirty.
Replace or clean the disc (see page 66).
A VCR is connected between the unit
and the TV.
Connect the unit and TV directly.
With some discs, a picture may be
blurred when setting “PROGRESSIVE
MODE” to “FILM” or “AUTO.”
Set “PROGRESSIVE MODE” to “VIDEO”
(see page 51).
“MULTI CH” or “L/R ONLY” appears
on the display.
The current track prohibits you from
playing back with stereo sound.
Activate Surround mode (see page 43) or
listen to another track.
The picture does not fit the TV screen
“MONITOR TYPE” is not set correctly.
Set the monitor type correctly (see page 51).
properly.
The TV is not set correctly.
Set the TV correctly.
One-touch DVD playback does not
work though you have connected AV
COMPU LINK cord correctly.
The video output mode setting is
incorrect.
Set the video output mode correctly
according to the video connection between
your TV and the unit (see page 22).
A disc cannot be played and “0:00”
appears on the display.
Video and audio are distorted.
No subtitle appears on the TV screen
though you have selected as your initial
subtitle language.
Some discs are programmed to always
display no subtitle initially. If this happens,
press SUBTITLE on the remote control
after starting play (see page 35).
Audio language is different from the
one you have selected as your initial
audio language.
Some discs are programmed to always use
the original language initially. If this
happens, press AUDIO on the remote
control after starting play (see page 35).
68
EN59-70RX-DV5SL[C]4.pm5
68
02.8.5, 5:34 PM
English
Troubleshooting
7
For Tuner
PROBLEM
Hard to listen to broadcast because of
noise.
Continuous hiss or buzzing during FM
reception.
POSSIBLE CAUSE
The AM loop antenna is too close to the
unit.
The supplied FM antenna is not
properly extended and positioned.
Incoming signal is too weak.
The station is too far away.
An incorrect antenna is used.
Occasional cracking noise during FM
reception.
7
Antennas are not connected properly.
Ignition noise from automobiles.
SOLUTION
Change the position and direction of the AM
loop antenna.
Extend the FM antenna at the best position.
Connect an outdoor FM antenna or contact
your dealer.
Select a new station.
Check with your dealer to be sure you have a
correct antenna.
Check connections.
Move the antenna farther from automobile
traffic.
For MP3
PROBLEM
A disc cannot be played.
POSSIBLE CAUSE
No MP3 files are recorded on the disc.
SOLUTION
Replace the disc.
The disc is unplayable (such as CDROM).
No MP3 files except JPEG files are
played.
7
MP3 files do not have the correct file
extension—.mp3, .Mp3, .mP3, or .MP3
in their file names.
Add the file extension—.mp3, .Mp3, .mP3,
or .MP3—to their file names (see page 45).
MP3 files are made at bit rate under
64 kbps.
This unit cannot play back such files.
Replace the disc.
MP3 files are not recorded in the format
compliant with ISO 9660 Level 1 or 2.
Replace the disc. (Record MP3 files using a
compliant application.)
The MP3/JPEG setting is set to
“JPEG.”
When both MP3 files and JPEG files are
recorded on a disc, to play MP3 files, set the
MP3/JPEG setting to “MP3” (see page 52).
For JPEG
PROBLEM
A disc cannot be played.
POSSIBLE CAUSE
No JPEG files are recorded on the disc.
SOLUTION
Replace the disc.
The disc is unplayable (such as CDROM).
No JPEG files except MP3 files are
played.
JPEG files do not have the correct file
extension in their file names.
Add the file extension—.jpg, .jpeg, .JPG,
.JPEG or any uppercase and lowercase
combination (such as “.Jpg”)—to their file
names (see page 47).
JPEG files are not made with baseline
JPEG format.
This unit cannot play back such files.
Replace the disc.
JPEG files are not recorded in the
format compliant with ISO 9660 Level
1 or 2.
Replace the disc. (Record JPEG files using a
compliant application.)
The MP3/JPEG setting is set to “MP3.”
When both MP3 files and JPEG files are
recorded on a disc, to play JPEG files, set
the MP3/JPEG setting to “JPEG” (see page
52).
69
EN59-70RX-DV5SL[C]4.pm5
69
02.8.5, 5:34 PM
Specifications
English
Designs & specifications are subject to change without notice.
Amplifier
Output Power
At Stereo operation:
Front channels: 100 W per channel, min. RMS, driven into 8 Ω,
40 Hz to 20 kHz with no more than 0.8% total
harmonic distortion.
At Surround operation:
Front channels:
100 W per channel, min. RMS, driven into 8 Ω
at 1 kHz, with no more than 0.8% total harmonic
distortion.
Center channel:
100 W, min. RMS, driven into 8 Ω
at 1 kHz, with no more than 0.8% total harmonic
distortion.
100 W per channel, min. RMS, driven into 8 Ω
at 1 kHz, with no more than 0.8% total harmonic
distortion.
Rear channels:
Audio
Audio Input Sensitivity/Impedance (1 kHz):
Audio Input (DIGITAL IN)* :
Signal-to-Noise Ratio (’66 IHF/’78 IHF):
Frequency Response (8 Ω):
Tone Control:
TV, TAPE/CDR, DBS, VCR:
240 mV/47 kΩ
Coaxial: DIGITAL 1 (DBS):
0.5 V(p-p)/75 Ω
Optical: DIGITAL 2 (TV):
–21 dBm to –15 dBm (660 nm ±30 nm)
* Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround
(with sampling frequency—32 kHz, 44.1 kHz, 48 kHz).
TV, TAPE/CDR, DBS, VCR:
87 dB/67 dB
TV, TAPE/CDR, DBS, VCR:
20 Hz to 20 kHz (±1 dB)
Bass (100 Hz):
±10 dB ±2 dB
Treble (10 kHz):
±10 dB ±2 dB
Video
Video Input Sensitivity/Impedance (1 kHz):
Composite video:
S-video:
Video Output Level/Impedance (1 kHz):
Composite video:
S-video:
Component video:
Color System:
Horizontal Resolution:
Signal-to-Noise Ratio (S/N):
Synchronize:
DBS IN, VCR IN:
DBS IN, VCR IN:
1 V(p-p)/75 Ω
(Y:luminance):
(C:chrominance):
VCR OUT, MONITOR OUT:
1 V(p-p)/75 Ω
VCR OUT, MONITOR OUT:
(Y:luminance):
(C:chrominance):
DVD COMPONENT VIDEO OUT:
(Component-Y):
(Component-PB/PR):
NTSC
500 lines
63 dB
Negative
1 V(p-p)/75 Ω
0.286 V(p-p)/75 Ω
1 V(p-p)/75 Ω
0.286 V(p-p)/75 Ω
1.0 V(p-p)/75 Ω
0.7 V(p-p)/75 Ω
FM tuner (IHF)
Tuning Range:
87.5 MHz to 108.0 MHz
Tuning Range:
530 kHz to 1 710 kHz
AM tuner
General
Power Requirements:
Power Consumption:
Dimensions (W x H x D):
Mass:
AC 120V , 60 Hz
200 W/255 VA (in operation)
2 W (in standby mode)
435 mm x 100 mm x 403.5 mm
(17 3 /16 in. x 3 15/16 in. x 15 14/16 in.)
7.9 kg (17.4 lbs)
70
EN59-70RX-DV5SL[C]4.pm5
70
02.8.5, 5:34 PM
VICTOR COMPANY OF JAPAN, LIMITED
EN, FR
© 2002 VICTOR COMPANY OF JAPAN, LIMITED
RX-DV5SL[C]cover_1.pm5
2
V
J
02.8.5, 5:36 PM
C
0802NHMMDWJEM