Shenzhen Foscam Intelligent technology FI8918W User manual

User Manual
Model: FI8918W
Indoor Pan/Tilt Wireless IP Camera
NIGHT VISION & REMOTE PAN / TILT ROTATE/
TWO WAY AUDIO
Color: Black
Color: White
CONTENTS
1 WELCOME..................................................................................................................................................... 1
1.1 Features .................................................................................................................................................. 1
1.2 Packing List ............................................................................................................................................. 2
1.3 Product views .......................................................................................................................................... 2
1.4 Preparations before use .......................................................................................................................... 4
2 SOFTWARE OPERATION ............................................................................................................................. 6
2.1 IP Camera Tool ........................................................................................................................................ 6
2.2 Camera Login .......................................................................................................................................... 9
2.3 Device Status......................................................................................................................................... 14
2.4 For Visitor .............................................................................................................................................. 15
2.5 For Operator .......................................................................................................................................... 16
2.6 For Administrator ................................................................................................................................... 19
3 How to configure settings in For Administrator ............................................................................................. 20
3.1 Alias Settings ......................................................................................................................................... 21
3.2 Date & Time Settings ............................................................................................................................. 21
3.3 User Settings ......................................................................................................................................... 22
3.4 Multi-Device Settings ............................................................................................................................. 23
3.5 Basic Network Settings.......................................................................................................................... 27
3.6 Wireless LAN Settings ........................................................................................................................... 28
3.7 ADSL Settings........................................................................................................................................ 29
3.8 UPnP Settings ....................................................................................................................................... 29
3.9 DDNS Service Settings.......................................................................................................................... 29
3.10 Mail Service Settings ........................................................................................................................... 29
3.11 MSN Settings ....................................................................................................................................... 31
3.12 FTP Service Settings ........................................................................................................................... 32
3.13 Alarm Service Settings......................................................................................................................... 34
3.14 PTZ Settings ........................................................................................................................................ 39
3.15 Upgrade Device Firmware ................................................................................................................... 39
3.16 Backup & Restore Settings.................................................................................................................. 40
3.17 Restore Factory Settings ..................................................................................................................... 40
3.18 Reboot Device ..................................................................................................................................... 40
WWW.FOSCAM.COM
FI8918W User Manual
3.19 Log....................................................................................................................................................... 40
3.20 Back..................................................................................................................................................... 41
4 APPENDIX ................................................................................................................................................... 41
4.1 Frequently Asked Questions .................................................................................................................. 41
4.2 Default Parameters................................................................................................................................ 44
4.3 Specifications......................................................................................................................................... 45
5 OBTAINING TECHNICAL SUPPORT .......................................................................................................... 46
1 WELCOME
IPCAM is an integrated wireless IP Camera solution. It combines a high quality digital video
Camera with network connectivity and a powerful web server on your desktop from anywhere on
your local network or over the internet.
The basic function of IPCAM is transmitting remote video on the IP network. The high quality
video image can be transmitted with 30fps speed on the LAN/WAN by using MJPEG hardware
compression technology.
The IPCAM is based on the TCP/IP standard. There is a WEB server inside which could support
Internet Explore. Therefore the management and maintenance of your device is simplified by
using the network to achieve the remote configuration, start-up and to upgrade the firmware.
You can use this IPCAM to monitor special places such as your home and your office. Also
controlling the IPCAM and managing image are simple by clicking the website through the
network.
1.1 Features
● Powerful high-speed video protocol processor
● High Definition Color CMOS Sensor
● 300K Pixels
● IR night vision (Range: 8m)
● Pan 300 degree, tilt 120 degree
● Optimized MJPEG video compression for transmission
● Multi-level users’ management and passwords definition
● Embedded Web Server for users to visit by IE
● Wi-Fi compliant with wireless standards IEEE 802.11b/g/n
● Supports Dynamic IP (DDNS) and UPnP LAN and Internet (ADSL, Cable Modem)
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
1
WWW.FOSCAM.COM
FI8918W User Manual
● Motion detection activates alarm
● Supports image snapshot
● Supports multiple network protocols: HTTP/TCP/IP/UDP/STMP/DDNS/SNTP/DHCP/FTP
● Supports WEP/WPA/WPA2 encryption
● Supports Daylight Saving Time
● Supports MSN
● Supports Gmail as sender on mail service settings
●Supports audio on Firefox,Safari and Google Chrome
1.2 Packing List
Untie the package and verify the items with the following list:
● IPCAM×1
● Wi-Fi Antenna×1 (only available for wireless model)
● DC Power Supply×1
● Quick Installation Guide×1
● CD×1(Includes IPCAM user manual、IP camera tool、FOSCAM Video Installation)
● Network Cable×1
● Mounting bracket×1(option)
● Warranty Card×1
NOTE: Please Contact us immediately in case of any damaged or missing parts.
1.3 Product views
1.3.1 Front View
Figure 1.1
Infrared LED: 11 IR LEDs
LENS: CMOS sensor with fixed focus lens. (3.6mm)
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
2
WWW.FOSCAM.COM
FI8918W User Manual
WIFI Antenna: Wireless Antenna
Microphone: Built-in microphone
Speaker: Built-in speaker
1.3.2 Back View
Figure 1.2
LAN: RJ-45/10-100 Base T
Power: DC 5V/2A Power supply
Network Light: The LED will blink when power and network cable are plugged in
Power Light: If the power adapter works well, the light will turn on
Audio Input: This jack is used to plug an external microphone
Audio Output: This jack is used to plug an external speaker
1.3.3 Bottom View
There are three stickers at the bottom of the camera; it is an important feature of original Foscam
cameras. If your camera does not have any of these three stickers, it may be a clone one.
Cloned Foscam cameras cannot use original firmware and not eligible obtain warranty or
technical services.
Figure 1.3
Reset button: Press and hold down the RESET BUTTON for 15 seconds. Releasing the reset
button, username and password will back to the factory default administrator username and
password. You must power on the camera before reset.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
3
WWW.FOSCAM.COM
FI8918W User Manual
1.4 Preparations before use
1.4.1 Software installation
(1) Put the CD in the CD drive of your computer. Open the CD; find the software per instructions;
(2) Double click IPCamSetup.exe and install the software per instruction.
Figure 1.4
(3) Click Next to complete the software installation.
Figure 1.5
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
4
WWW.FOSCAM.COM
FI8918W User Manual
Figure 1.6
The computer restarts upon installation completion and an icon
automatically.
appears on the desktop
NOTE: If you use Windows7 and could not find the icon on desktop after installing the IP camera
tool, please check if the path of the camera software is correct.
For example, if it was pointing to C:\Windows\System32\IPCamera.exe.
Then fix this by pointing the shortcut to the correct path C:\Windows\SysWOW64\IPCamera.exe.
The shortcut should work without any problems.
CAUTION: Before installing and using the product, please read the following precautions
carefully and make sure they are fully understood.
Use only the power adapter attached with the product. Using unauthorized power adapters may
cause damage to your IP Camera. IP Camera terminal shall be installed in an indoor
environment where the rain or snow could not pour it.
1.4.2 Hardware preparation
Follow the steps below to set up your camera hardware connections. Make sure to follow each
step carefully to ensure that the camera operates properly.
(1) Adjust the antenna at the back of the camera.
(2) Plug the network cable into the camera and then into your Cable/DSL router.
(3) Plug the power adapter into the camera and then into the power outlet.
CAUTION: Make sure to only use the power adapter supplied with IPCAM. Using a
non-approved power adapter may damage the camera.
(4) The camera takes approximately 30 seconds to start up before it displays an IP address on
the IP Camera Tool (details: 2.1)
(5) When the camera is powered and network cable plugged correctly, the small green light
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
5
WWW.FOSCAM.COM
FI8918W User Manual
(network jack) will turn on and the small yellow light will flash. The network light will blink.
(about 1~2 times per second) and the power light will also turn on.
2 SOFTWARE OPERATION
2.1 IP Camera Tool
When the Device has been mounted properly, you can double click the icon “IP Camera Tool”
and a dialog box as Figure 2.1 will pop up.
Figure 2.1
The software searches for the IPcam automatically over the LAN.
There are 3 cases:
(1) If no Camera found in LAN. After about 1 minute of searching, the Result Field will show
“not found IP Server” and the program shuts off automatically.
(2) If IP Cameras have been found within LAN. All the IP Cameras will be listed and the total
number is displayed in the result field as shown in Figure 2.1.
(3) The IP Cameras installed within LAN do not share the same subnet with the monitoring PC.
A prompt is displayed with a “Subnet doesn’t match, dbclick to change!” message. Click the
left mouse button to choose the prompt and click the right mouse, choose Network
Configuration to set the IP address of the Camera to the same subnet as the LAN. (Figure 2.5)
You can choose obtain IP from DHCP server or set a static IP for the camera. (Figure 2.4)
NOTE: If you could not find the camera’s IP on the IP camera tool.
Please check if DHCP is enabled on your router, or disable MAC address filter.
Make sure that the firewall doesn’t block the camera.
Six Options
Choose the IP Camera list and right click; there are six options, Basic Properties, Network
Configuration, Upgrade Firmware, Refresh Camera List, Flush Arp Buffer and About IP Camera
Tool as shown Figure 2.2.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
6
WWW.FOSCAM.COM
FI8918W User Manual
Figure 2.2
z Basic Properties
There are some devices information in the Basic Properties, such as Device ID, System
Firmware Version, and Web UI Version. (Figure 2.3)
If there are several cameras on the list, you can choose basic properties to check the device ID
and recognize the IP address belong to which camera you set up, For example Device ID is
00606E8C5058, the same MAC ID sticker is found at the bottom/back of the camera.
Each camera has its own MAC ID. Sometimes, if camera’s IP is not found on the IP Camera Tool.
The firewall may be blocking it, therefore you can add this MAC ID to your router and give it a
fixed IP or add the MAC ID as a trusted site. There are two MAC addresses, one is Wired MAC
and the other is WIFI MAC.
Figure 2.3
z Network Configuration
This page will allow you to configure the Network parameters.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
7
WWW.FOSCAM.COM
FI8918W User Manual
Figure 2.4
Obtain IP from DHCP server: If checked, the device will obtain IP from DHCP server. In other
words, the camera will have a dynamic IP. (Make sure the Router which the camera connects
has DHCP function and DHCP is enabled).
Figure 2.5
IP Address: Fill in the IP address assigned and make sure it is in the same subnet as your
computer or router. (I.e. the first three sections are the same)
Subnet Mask: The default subnet mask of the equipment in our LAN is: 255.255.255.0.You can
find the subnet mask in the basic information of your router or the locally-attached of your PC.
Gateway: Make sure it is in the same subnet with PC’s IP address. The gateway is your router’s
LAN IP.
DNS Server: IP address of your ISP network provider. You can find the DNS server in your
router or check the locally-attached address of your computer. Your PC contains your PC’s IP
address, gateway and DNS server. Normally, there are two DNS servers. Here you can also set
the DNS server the same with gateway.
Http Port: The default Lan port is 80.You can set another port number, such as port 8005, 85,
8100.etc.
User: Default administrator user name is admin
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
8
WWW.FOSCAM.COM
FI8918W User Manual
Password: Default password is blank, no password.
NOTE: If the prompt “Subnet doesn’t match, dbclick to change!” appears, please enable DHCP
and choose obtain IP from DHCP server or set camera’s IP address and gateway once again.
z Upgrade Firmware
Enter the correct User and Password to upgrade system Firmware and Web UI. If you upgrade
the camera, you must upgrade system firmware first and then upgrade web UI. Or it may
damage the camera.
Please download the firmware package under the correct type of your camera before upgrade.
Follow the upgrade documentation in the package carefully to upgrade. Read the readme.txt file
first before you upgrade.
CAUTION: Please don’t upgrade the firmware freely. Sometimes, your camera may be damaged
if configured wrong during the upgrade. If your camera works well with the current firmware, we
recommend not upgrading.
NOTE: If you download the firmware. Please check if bytes of the two .bin file are exactly the
same with the size in readme. If it fits, you can upgrade it. If not, please download the firmware
again until the bytes are exactly the same with the official size. Otherwise, your camera will crash
by the firmware which you selected.
Figure 2.6
z Refresh Camera List
Refresh camera list manually.
z Flush Arp Buffer
When wired and wireless of the camera both are fixed IP address. You may encounter an issue
with not being able to open the camera webpage. You may try to use flush Arp buffer.
z About IP Camera Tool
Display the version of the IP Camera Tool.
2.2 Camera Login
You can access the camera through the IP Camera Tool or IE, Firefox, Google Chrome,
Safari or other stand browser directly.
(1) Double click the IP address of the IP Camera listed (Figure 2.1).The browser you use will be
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
9
WWW.FOSCAM.COM
FI8918W User Manual
opened automatically and display the camera login page. (Figure 2.8)
(2) You can also access the camera by IE browser directly by typing in the camera’s IP address.
For example:
Figure 2.7
Figure 2.8
The default user is admin, no password.
There are two modes to login. If you use IE browser, please choose activeX mode to login. If you
use Firefox or Google Chrome, please choose Server Push Mode to login. (Figure 2.9)
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
10
WWW.FOSCAM.COM
FI8918W User Manual
If you use IE browser, select this login mode
If you use Firefox, Google Chrome, Safari ,select this
login mode
Figure 2.9
For IE browser
Fill in the user name and choose the first login button.
Click right mouse and choose Run Add-on
Figure 2.10
The first time you login the UI. You will receive an activeX prompt as in the picture above. (Figure
2.10) Right click on the active prompt and choose Run Add-on(Figure 2.11).
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
11
WWW.FOSCAM.COM
FI8918W User Manual
Figure 2.11
Select Run on the next prompt (Figure 2.12) which will return to the login screen.
Figure 2.12
Fill in the user name and select login again. You will see a live video. (Figure 2.13)
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
12
WWW.FOSCAM.COM
FI8918W User Manual
Figure 2.13
NOTE: If you could not view living video after running the activeX. Only a red cross
in the
center of the video or just a black screen. Please change another port number to try. Don’t use
port 80.Use port 85, 8005 or 8100 to try.
Make sure all firewall or antivirus software on your computer does not block the active download
and installation. If you are unable to run the activeX control, try shutting down the firewall or
antivirus program.
For Firefox, Google Chrome, Safari or other standard browser
Fill in the user name and choose the second login button.
It may ask you for user name and password again before you login the UI.
After you enter the user name, you will see Device Status of the camera.
Figure 2.14
Click Live Video, you will see the camera’s live video.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
13
WWW.FOSCAM.COM
FI8918W User Manual
Figure 2.15
2.3 Device Status
For IE browser
If the camera is connected properly the light of the device status will show green.
If the light show yellow check if the activeX is enabled or change another port number and try
again.
Figure 2.16
If you want to view the device information, choose For Administrator and then click Device info
(Figure 2.17)
.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
14
WWW.FOSCAM.COM
FI8918W User Manual
Figure 2.17
For Firefox, Google Chrome and Safari
When you login the UI, you will see Device Status which is the same as Device Info in IE
browser. (Figure 2.14)
2.4 For Visitor
For IE browser
Figure 2.18
Multi-device window: The firmware inside the camera supports up to maximum of 9 cameras
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
15
WWW.FOSCAM.COM
FI8918W User Manual
monitoring at the same time. You can add cameras in multi-device settings.
OSD: OSD is used to add timestamp on the video. There are five character colors to choose
from..
Add timestamp on record: Select this option if you want to add a timestamp on record
Alarm sound off: Select this option, you cannot hear the beep alarm sound when the motion is
detected.
Audio buffer: Audio buffer with units set as number of seconds
: When you enable motion alarm, the camera will record automatically and store the
recording file to the folder you set. This icon is used to control the folder pop-up automatically or
not.
: Click the headphone icon and you will hear sound captured by the camera’s built-in
microphone. You may need to plug in earphones or enable the computer speakers to hear from
the camera’s microphone.
: Click the speaker icon and then talk through your computer’s microphone which will transmit
through the camera’s speaker. People will hear your talking through the camera’s built-in
speaker.
Record: Click the record icon. The camera will begin recording and store the .avi file to the folder
you set. (Figure 3.3) Click the record icon again to stop the recording.
For Firefox, Google Chrome and Safari
You will see the picture like Figure 2.14 when you login the camera as a visitor.
2.5 For Operator
For IE browser
Click For Operator, the following screen will appear (Figure 2.19)
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
16
WWW.FOSCAM.COM
FI8918W User Manual
If you click here, the camera will horizontally & vertically rotate and
then stop at the center
Turn off IR light
Turn on IR light
Pre-determined location
Figure 2.19
: Click this icon; camera will rotate up and down. Click
: Click this icon; camera will rotate left and right. Click
: Click this icon, all the IR lights will turn on. Click
to stop.
to stop.
to turn off them.
Flip & Mirror: You can choose flip or mirror if you set up the camera to show a reverse image.
Mode: There are three modes. (50HZ, 60HZ and outdoor)
Brightness and Contrast are also used to adjust the quality of the video.
Preset: You can create preset positions for the camera to go to directly from one position to
another. A total of 8 preset positions can be configured.
Pls follow the steps below to create preset positions:
1 Adjust the shooting area to a desired position.
2 Click set 1 to define your home position.
3 To add additional preset positions, pls repeat step1-2.
When the camera rotates to other position, only choose the preset num you have set and click go,
the camera will go to the desired position.
If you want to delete one position, only reset the position num.
For Firefox, Google Chrome and Safari
Click Live Video. There are several differences between IE and Firefox.
In Firefox, the snapshot button is under For Operator. Other functions under Live Video include:
refresh video, refresh parameters, audio and close audio. (Figure 2.20a)
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
17
WWW.FOSCAM.COM
FI8918W User Manual
Figure 2.20a
audio: Connect speakers or earphone or other audio output device with PC. Click “audio” and
you will hear sound from the IPCAM built-in microphone.
Closeaudio: Click Close audio to turn off audio.
NOTE: You must have installed VLC before using this function. If you have not,download and
install the plugin from http://www.videolan.org (Figure 2.20b) and install it.
Figure 2.20b
During the installation, you must select Mozilla plugin as in Figure 2.20c.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
18
WWW.FOSCAM.COM
FI8918W User Manual
Figure 2.20c
2.6 For Administrator
For IE browser
Click For Administrator. You will see the Device Status.
It contains device ID, firmware version of the camera and other status of the camera.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
19
WWW.FOSCAM.COM
FI8918W User Manual
Figure 2.21
For Firefox, Google Chrome and Safari
Click Device Management and you will enter the settings page for administrator.
Figure 2.22
We can see the difference from Figure 2.21 and Figure 2.22.
IE has the three following options which are not the same in Firefox, Google Chrome and Safari:
Device Info: This is similar to Device Status which will have the same information as IE.
Multi-Device Settings: Since this function is controlled by activeX, it is not available in Firefox or
Google Chrome.
Back: In Firefox or Google browser, you must click Live Video or Device Status to go back.
NOTE: Record and multi-device function are controlled by activeX controller, therefore Firefox or
Google Chrome will not allow these functions.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
20
WWW.FOSCAM.COM
FI8918W User Manual
3 How to configure settings in For Administrator
3.1 Alias Settings
Default alias is anonymous. You can set a name for your camera here such as Ipcam. Click
Submit to save your change. (Figure 3.1)
Figure 3.1
3.2 Date & Time Settings
Choose the clock timezone of your country. You can choose Sync with NTP Server (Figure 3.2a)
or Sync with PC Time. (Figure 3.2b) If your country is implementing the Daylight Saving Time,
here you can set it for your camera(Figure 3.2c).
Figure 3.2a
Figure 3.2b
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
21
WWW.FOSCAM.COM
FI8918W User Manual
Figure 3.2c
3.3 User Settings
You can set permission for visitor, operator and administrator.
Click Submit to save these settings. The camera will reboot.
Figure 3.3
Here you can set the record file path and the alarm record file path for the camera. Click Browse
and choose the path. Record Path will store the file of the recording when you record manually.
(Click record icon to record. Figure 2.18)
Alarm record path will store the file of the recording when it is activated by motion. (you must set
motion alarm first) (Figure 3.25)
The default path for Record Path and Alarm Record Path is C:\Documents and Settings\All
Users\Documents.
NOTE: In Windows7 or Vista, if you cannot change the record path. Please set as below:
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
22
WWW.FOSCAM.COM
FI8918W User Manual
Windows7 or Vista's security level is higher than Windows XP/2000.For "set record path"
function, add the Device IP address to the IE's 'Trusted sites' first as follows:
IE browserÆToolÆInternet ProperÆSecurityÆTrusted sitesÆSitesÆAdd
3.4 Multi-Device Settings
The firmware inside the camera can support a maximum of 9 devices monitoring at the same
time.
3.4.1 Add cameras in LAN
In Multi-Device Settings page, you can see all devices searched in LAN. The 1st Device is the
default one. You can add more cameras in the list in LAN for monitoring. The camera’s software
supports up to 9 IP Cameras online simultaneously. Click The 2nd Device and click the item in
the Device List in LAN, the Alias, Host and Http Port will be filled in the boxes below
automatically. Enter the correct username and password then click Add. Add more cameras in
the same way. After all cameras have been added., choose Submit.
Figure 3.4
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
23
WWW.FOSCAM.COM
FI8918W User Manual
Figure 3.5
Choose For Visitor and then click the four windows option. You will see all four cameras you
added.
Figure 3.6
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
24
WWW.FOSCAM.COM
FI8918W User Manual
Figure 3.7
3.4.2 Add cameras in WAN
If you want to view all cameras via internet. (remote computer), you will need to add them use
DDNS domain name. First, make sure all of the cameras you added can be accessed through
the internet. ( read How to set DDNS settings in Quick Installation Guide)
Login the first camera using a DDNS domain name and port.
Figure 3.8
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
25
WWW.FOSCAM.COM
FI8918W User Manual
If you have several cameras, you can use the same DDNS domain name; you only need to set a
different port number for each camera.
Click Multi-Device Settings. Choose The 2nd Device. Fill in the 2nd camera’s name, DDNS
domain name, port number. Enter user name and password and then choose Add. (Figure 3.9)
NOTE: Here Host must be filled in the second camera’s DDNS domain name, not its LAN IP.
Figure 3.9
Add the other cameras in the same way. Click Submit to save.
Figure 3.10
Go back to video window. You will see all of the cameras accessible through the internet
When you are away from home, you can use the first camera’s DDNS domain name and port to
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
26
WWW.FOSCAM.COM
FI8918W User Manual
view all the cameras via internet.
Figure 3.11
3.5 Basic Network Settings
If you want to set a static IP for the camera, select Basic Network Settings. Keep the camera in
the same subnet of your router or computer.
Figure 3.12
It is the same result if set these settings in IP Camera Tool. (Figure 2.5)
If you don’t know the subnet mask, gateway and DNS server, you can check your computer’s
local area connection as follows:
Control PanelÆNetwork ConnectionsÆ Local Area Connections Æ Choose
SupportÆDetails (Figure 3.14)
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
27
WWW.FOSCAM.COM
FI8918W User Manual
Figure 3.13
Figure 3.14
If you don’t know the DNS server, you can use the same settings as the Default Gateway.
3.6 Wireless LAN Settings
Please view How to set Wireless LAN Settings in Quick Installation Guide.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
28
WWW.FOSCAM.COM
FI8918W User Manual
3.7 ADSL Settings
Figure 3.15
When connected to the Internet through ADSL directly, you can enter the ADSL username and
password obtained from your ISP.
Figure 3.16
3.8 UPnP Settings
Choose Using UPnP to MAP Port and then click Submit.
Figure 3.17
The camera’s software will be configured port forwarding. We recommend you configure port
forwarding manually on your router.
3.9 DDNS Service Settings
Please view the information in Quick Installation Guide about How to set DDNS Service
Settings.
3.10 Mail Service Settings
If you want the camera to send emails when motion has been activated, Mail Service Settings
will need to be configured.
.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
29
WWW.FOSCAM.COM
FI8918W User Manual
Figure 3.18
Make sure your mailbox for sender supports SMTP. Four recipients can be added to receive
images. SMTP port is usually set as 25. Some SMTP servers have their own port, such as 587
or 465 and Transport Layer Security usually is None. If you use Gmail, Transport Layer Security
must be set to TLS or STARTTLS and SMTP Port must be set to 465 or 25 or 587, which port
you choose should be decided by which Transport Layer Security you select.
NOTE: Click Submit first before choosing Test.
Click Test to see if SMTP has been successfully configured.
.
Figure 3.19
If an error occurs with one of the following errors after clicking Test, verify the information you
entered is correct and select Test again.
1) Cannot connect to the server
2) Network Error. Please try later
3) Server Error
4) Incorrect user or password
5) The sender is denied by the server. Maybe the server need to authenticate the user, please
check it and try again
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
30
WWW.FOSCAM.COM
FI8918W User Manual
6) The receiver is denied by the server. Maybe because of the anti-spam privacy of the server
7) The message is denied by the server. Maybe because of the anti-spam privacy of the server
8) The server does not support the authentication mode used by the device
Report Internet IP by Mail—If selected, you will receive emails which contains internet IP
information such as When the camera is powered or the Internet IP has changed. (For example:
IPCAM's urls is http://119.123.207.96:8068). Make sure the port is mapped to the router
correctly.
3.11 MSN Setting
If you forget the domain name of the camera and you want to access the camera remotely, you
must configure MSN.
Apply a MSN ID for IPCAM first, then do as the picture.
Figure 3.20a
Go back to the “Device Info” screen and verify the MSN settings are correct.
Figure 3.20b
All users entered on the MSN Friends list can chat with the camera .For example:
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
31
WWW.FOSCAM.COM
FI8918W User Manual
“foscam13”(see Figure 3.20a,it is contained in the MSN Friends List) login MSN, double click the
icon of “ foscam31 “(it is the MSN ID you applied for camera ,Figure3.20a) ,he or she can chat
with IPCAM(Figure 3.21)
Figure 3.21
So,add your MSN ID to the MSN Friend List ,you can chat with camera and get the access
address and then access the camera.
Note: When you login the camera by IP Camera Tool, you can’t login MSN of camera at the same
time.
3.12 FTP Service Settings
If you want to upload images to your FTP server, you can set FTP Service Settings.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
32
WWW.FOSCAM.COM
FI8918W User Manual
Figure 3.22
Figure 3.23
FTP server: If your FTP server is set up in LAN, you can set as Figure 3.22
If you have a FTP server which you can access on the internet, you can set as Figure 3.23
FTP Port: Usually the port is 21
FTP Upload Folder: Make sure that the folder you plan to store images exists. For camera
couldn’t create the folder itself. Also, the folder must be erasable.
FTP Mode: It supports standard (POST) mode and passive (PASV) mode
Upload Image Now: This option will upload images when you enable the checkbox.
Upload Interval refers to the time between the current image and the next image.
Enable Set Filename: You can set a name for the uploaded image when you enable the
checkbox. If you select it, the uploaded image will be named after the filename you set. So the
next image will cover the last image and the FTP Upload Folder will only have one uploaded
image which named after the filename you set.
Filename: Fill in a name for the uploaded image. This name is different from the alarm image.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
33
WWW.FOSCAM.COM
FI8918W User Manual
You cannot change the name of the alarm image.
Click Submit to save these settings. Click Test. The following screen displays if it succeeded.
(Figure 3.24)
Figure 3.24
The following errors may occur:
1) Can not connect to the server. Check if the FTP Server is correct.
2) Network Error. Please try later.
3) Server Error.
4) Incorrect user or password. Check the username and password.
5) Cannot access the folder. Verify the folder exists and your account is authorized
6) Error in PASV mode. Verify the server supports PASV mode
7) Error in PORT mode. PASV mode should be selected if the device is behind a NAT
8) Cannot upload file. Verify your account is authorized
Check parameters. The format of image is similar to
00606E8C1930(sarah)_0_20100728114350_25.jpg
Check if your FTP server supports this file name format
3.13 Alarm Service Settings
If you enable Motion Detect Armed, it will send email alerts and upload images when motion
has been detected.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
34
WWW.FOSCAM.COM
FI8918W User Manual
Select it
If the number is bigger and the
sensibility is higher
This will reduce false alarms such as light
changes.
Figure 3.25
Figure 3.26
If motion is detected after you enable Motion Detect Armed, the Alarm Status will turn to Motion
Detect Alarm.
There are five alarm indicators:
1) The light turns red when motion is detected.
Figure 3.27
2) A beep sound when the light turns red.
3) The camera will record automatically for one minute after motion is detected. You can
find the recording file in the folder which you set previously. (Figure 3.3)
4) Camera will send emails when motion is activated.
If you want to receive images when motion is detected, you must set Mail Service Settings first.
(Figure 3.18) Then set motion alarm as follows:
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
35
WWW.FOSCAM.COM
FI8918W User Manual
Select this option
Figure 3.28
If you want to specify when the camera sends mails in a specific time when motion is detected,
You can choose Scheduler and set the time range for motion alarm. (Figure 3.31-3.33)
5) Upload images via FTP server when motion trigger.
To upload images to an FTP server when motion is detected, you must set FTP Service
Settings first and then set motion alarm as pictured below (Figure 3.29)
Select this option
You can set an interval for uploading images
.
Figure 3.29
There are two ways to set the alarm.
1) Alarm at any time when motion is detected.
Don’t choose Scheduler. Click Submit and the camera will alarm at any time when motion is
detected.
Another way: Choose Scheduler, and click “set All”, you can see all time box will turn blue as the
following picture. Click Submit and the camera will alarm at any time when motion is detected.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
36
WWW.FOSCAM.COM
FI8918W User Manual
Figure 3.30
2) Specify an alarm schedule.
If you want the camera to alarm during the time you set select Scheduler and set time range.
If you want to select one serial area, you can click any number between 00 and 23 at the first row,
the corresponding column will be selected and it will turn blue. For example, click the number
“06” at the first row, you can see the column turn blue. That means the camera will alarm when
motion is detected between 6 and 7 o’clock during everyday. Click the number“06” at the second
row, you can cancel the corresponding column you set. And it will turn gray.
Figure 3.31
If you want to select discrete area, you can click left button on the box of time range. It will turn
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
37
WWW.FOSCAM.COM
FI8918W User Manual
blue. If you want to delete it, just click the left button and It will turn gray.
Figure 3.32
If you want the camera alarm at most time, you can select set All first and then click left button at
the box you don’t want the camera alarm even when the motion is detected. The box will turn
gray. Click Submit and it will take effect.
Figure 3.33
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
38
WWW.FOSCAM.COM
FI8918W User Manual
3.14 PTZ Settings
You can set pan/tilt speed. Normally, PT speed is 3; The larger the setting number, the lower
speed. Don’t enable the checkbox “disable preset” if you want to use the function of preset, it will
be effective after you reboot device
Figure 3.34
Patrol rounds horizontal: Set the round between 1 and 10, then click Submit. Back to “For
Operator”. Click the Horizon patrol button, the camera will patrol the rounds horizontally you
have set and then stop if you don’t click Stop horizon patrol button. For example, you set 5 for the
patrol rounds. Click submit and back to For Operator. Click the Horizon patrol button and do not
click the Stop horizon patrol button, the camera will patrol 3 rounds and then stop automatically.
Patrol rounds vertical: Set the round between 1 and 10, then click submit. Back to “For
Operator”. Click the Vertical patrol button, the camera will patrol the rounds vertically you set and
then stop if you don’t click Stop vertical patrol button.
Note: Patrol rounds horizontal/vertical has no relation with the rotation rounds that camera
reboots.
3.15 Upgrade Device Firmware
When you upgrade the camera, please upgrade system firmware first and then upgrade the Web
UI.
Figure 3.35
NOTE: After you upgrade the system firmware, you will not be able to view the camera in a
browser before you upgrade the Web UI. Make sure the IP camera tool on your computer could
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
39
WWW.FOSCAM.COM
FI8918W User Manual
find your camera’s IP before you choose upgrade in browser.
The Web UI only can be upgraded by IP camera tool after you upgrade the system firmware.
Click Browse, choose the correct bin file and then click Submit to upgrade.
Don’t shut down the power during upgrade until the IP camera tool finds the camera again.
3.16 Backup & Restore Settings
Click Submit to save all the parameters you have set. These parameters will be stored in a bin
file for future use. The bin file can be restored to load the parameters that were set.
Figure 3.36
3.17 Restore Factory Settings
All parameters will return to factory settings if selected.
Figure 3.37
3.18 Reboot Device
Click Reboot Device to reboot the camera. This is similar to unplugging the power to the
camera.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
40
WWW.FOSCAM.COM
FI8918W User Manual
3.19 Log
The log record shows who accessed the camera (Figure 3.38).
Figure 3.38
3.20 Back
This will take you back to the video window.
4 APPENDIX
4.1 Frequently Asked Questions
NOTE: Always verify network connections are working by checking the status of the indicators
on the network server, hub, exchange and network card.
4.1.1 I have forgotten the administrator username and/or password
To reset the administrator username and password, press and hold down the RESET BUTTON
for 15 seconds. Releasing the reset button will restore the factory default settings for username
and password. You must power on the camera before reset.
Default administrator username: admin
Default administrator password: No password
4.1.2 Subnet doesn’t match, dbclick to change
If IP Camera Tool shows the error “Subnet doesn’t match, dbclick to change!”, select Obtain IP
from DHCP server. (Figure 2.4)
If this error still exists after obtain IP from DHCP server, check your local area connection of your
computer and verify the subnet and gateway of the camera which should be the same subnet of
your computer. (Figure 2.5)
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
41
WWW.FOSCAM.COM
FI8918W User Manual
4.1.3 No Pictures Problems
The video streaming is transmitted by the ActiveX controller. If ActiveX controller isn’t installed
correctly you will see no video image. There are two ways to resolve this problem:
1) Re-install “IP Camera Tool” and activeX control(recommended) (Figure 2.10~Figure 2.12)
2) Download ActiveX controller and set the security setting of IE: IE browserÆToolÆInternet
ProperÆSecurityÆCustom LevelÆActiveX control and Plug-ins. The first three options should
be set to be “Enable”, The ActiveX programs read by the computer will be stored. As follows:
Enable: Download unsigned ActiveX controls
Enable: Initialize and script ActiveX controls not marked as safe
Enable: Run ActiveX controls and plug-ins
Figure 4.1
If you allow the activeX to run but still cannot see live video and a red cross in the center of the
video. There is a yellow light in the device status.
)
Change another port number. Do not use port 80. Use port 85, 8005.etc.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
42
WWW.FOSCAM.COM
FI8918W User Manual
Figure 4.2
NOTE: Make sure that your firewall or anti-virus software does not block the camera or activeX.
If you can not see live video, try shutting down the firewall or anti-virus software and try again.
4.1.4 Can’t access IP camera on internet
Possible reasons why camera is not accessible on the internet:
1 ActiveX controller is not installed correctly (see more details: Figure 2.10~Figure 2.12).
2 The port which the camera uses is blocked by a Firewall or Anti-virus software. Try changing to
another port number. (Figure 4.2)
3 Port forwarding is not successful (see more details in Quick Installation Guide—How to set
DDN Service settings)
4.1.5 IP Camera Tool could not find camera’s IP
Verify that the network cable is securely fastened to the camera.
Make sure DHCP is enabled on your router, do not enable MAC address filter.
Make sure that the firewall or anti-virus software does not block the camera. You can add the
camera as a trusted site on your firewall or anti-virus software.
4.1.6 UPnP always failed
UPnP only contains port forwarding in our recent software. Sometimes, it may fail to do port
forwarding automatically because of the firewall or anti-virus software. It may also be due to the
router’s security settings. We recommend manually configuring port forwarding and the camera
can be viewed on the internet.
4.1.7 Couldn’t find the shortcut on the desktop after install IP camera tool
If you use Windows7 or Vista and the shortcut is missing after installing the IP camera tool,
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
43
WWW.FOSCAM.COM
FI8918W User Manual
check the path of IP Camera program.
For example, as it was pointing to C:\Windows\System32\IPCamera.exe.
Please fix this by pointing the shortcut to the correct path
C:\Windows\SysWOW64\IPCamera.exe. After this you could use the shortcut without any
problems.
4.1.8 I can’t change the record path
When you use Windows7 or Vista, you may be not able to change the record path for the
security settings of computer. Please add the camera as a trusted site to resolve this issue. The
steps are
IE browserÆToolÆInternet ProperÆSecurityÆTrusted sitesÆSitesÆAdd
4.1.9 I can’t find multi-device settings and record icon
Record and multi-device function are controlled by activeX controller.
These functions are not available in Firefox, Google Chrome and Safari.
4.1.10 Camera can not connect wireless
If your camera can not connect wirelessly after you set the wireless settings, unplug / plug the
power cable. (for more details :Wireless LAN settings in Quick Installation Guide)
Usually, cameras can’t connect wireless mainly because of wrong settings.
Verify that the SSID is correct; use the same encryption for router and camera. Don’t enable
MAC address filter.
4.1.11 I can’t see other cameras which in multi-device when remote access
If you want to view all the cameras on the WAN, verify that each camera you added in the
multi-device settings can be accessed by using the DDNS name and port number. Use the
DDNS domain name not camera’s LAN IP. ( for more details: How to add cameras in WAN)
4.1.12 Only see black screen or undefined characters when using remote
login
If you could access the login page remotely, this indicates that your DDNS settings are correct. If
you are unable to see live video but only some undefined characters, this may be due to internet
speed issues or the camera using Wi-Fi.
.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
44
WWW.FOSCAM.COM
FI8918W User Manual
4.2 Default Parameters Default network Parameters
IP address: obtain dynamically
Subnet mask: 255.255.255.0
Gateway: obtain dynamically
DHCP: Disabled
DDNS: Disabled
Username and password
Default administrator username: admin
Default administrator password: No password
4.3 Specifications
ITEMS
FI8918W
Image Sensor
High Definition Color CMOS Sensor
Display Resolution
640 x 480 Pixels(300k Pixels)
Lens
f: 3.6mm
Mini. Illumination
0.5Lux
Lens
Lens Type
Glass Lens
Video
Image
Compression
MJPEG
Image Frame Rate
15fps(VGA),30fps(QVGA)
Resolution
640 x 480(VGA), 320 x 240(QVGA)
Flip Mirror Images
Vertical / Horizontal
Light Frequency
50Hz, 60Hz or Outdoor
Video Parameters
Brightness, Contrast
Ethernet
One 10/100Mbps RJ-45
Supported Protocol
HTTP,FTP,TCP/IP,UDP,SMTP,DHCP,PPPoE,DDNS,UPnP,GPRS
Wireless Standard
IEEE 802.11b/g/n
Data Rate
802.11b: 11Mbps(Max.) 802.11g: 54Mbps(Max.)
802.11n: 150Mbps(Max.)
Wireless Security
WEP & WPA & WPA2 Encryption
Infrared Light
11 IR LEDs, Night visibility up to 8 meters
Dimension
110(L) x100(W) x108mm(H)
Gross Weight
768g (Color Box Size:200X124X189mm)
Net Weight
418g (accessories included)
Power Supply
DC 5V/2.0A (EU,US,AU adapter or other types optional)
Power
Consumption
5.5 Watts (Max.)
Operate Temper.
0° ~ 55°C
Operating
Humidity
20% ~ 85% non-condensing
Image
Sensor
Communication
Power
Environment
(32°F ~ 131°F)
Storage Temper.
-10°C ~ 60° (14°F ~ 140°F)
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
45
WWW.FOSCAM.COM
PC Requirements
Certification
FI8918W User Manual
Storage Humidity
0% ~ 90% non-condensing
CPU
2.0GHZ or above
Memory Size
256MB or above
Display Card
64M or above
Supported OS
Microsoft Windows 2000/XP/Vista/Windows7
Browser
IE 6.0, IE7.0, IE8.0,IE9.0 Firefox, Google Chrome, Safari or other
standard browsers
CE,FCC
5 OBTAINING TECHNICAL SUPPORT
While we hope your experience with the IPCAM network camera is enjoyable and easy to use,
you may experience some issues or have questions that this User’s Guide has not answered.
If you have problem with FOSCAM IP camera, please first contact FOSCAM reseller for solving
the problems. If our reseller cannot provide service, pls contact our service department:
tech@foscam.com .
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
46