Pro-face GP577R-SC11 Specifications

www.klinkmann.com
User Interface Panels
for PLCs and other CPU devices
32 bit
RISC CPU POWER
low cost volume HMI
easy configuring with PC
various interfaces for PLCs, LANs,
fieldbuses, networks, wireless etc.
ISO9001
JQA-1367
Programmable
Operator Interfaces
GP SERIES
Faster, Smarter, Brighter
Pro-face's New GP77 series Operator Interfaces with Super
High-Speed 100 MHz RISC CPU
Next generation programmable operator interface "From PLC's Face to its Brain" - the Power GP Series!
01
GP SERIES
Programmable Operator Interfaces
contents
Today's rapid pace of high-tech innovation
has increased the need for industrial
automation.
Pro-face's "GP Series" programmable
operator interfaces, in pursuit of more
comfortable communication between
High Performance
Interface GP77 Series
03-04
GP77 Series
Standart Features
05
Evolving HMI-from PLC's
"Face" to its "Brain"
06
Allows you to monitor
your production site
information in real time!
07
Save Development
Time and Space while
Improving Operability
08
human and machines, have been striving
for the best: high performance and
advanced design.
Going through a series of innovation, GP
Series have gained popularity among
many users.
"From PLC's Face to its Brain" - Pro-face's
lineup of new concept programmable
display panels each pursues the primary
goals of the next generation of industrial
automation, "Faster, Smarter and
Brighter".
GP-PRO/PB
for
Windows ver. 4.0
Version up Features
09-10
GP-PRO/PB
for
Windows Standart
Features
11-13
A Wide Range of
Supported Data
Formats
Power GP Series
Full Line up!!
02
GP SERIES
Programmable Operator Interfaces
14
Fieldbus Network and
Peripheral Connections
15-16
Connections
17-18
Global Safety Standard
Complian Products
19
Global Support Network
20
Specifications
21
High Performance Interface GP77 Series
GP-577RT
GP-577RS
100MHz RISC CPU
Resolution : 640X480 pixels
10.4 inch STN Color LCD
FLASH EPROM 2MB
(Screen Memory)
32 bit RISC CPU POWER
100MHz RISC CPU
Resolution : 640X480 pixels
10.4 inch TFT Color LCD
FLASH EPROM 2MB
(Screen Memory)
GP-477RE
GP-377RT
100MHz RISC CPU
Resolution : 640X400 pixels
9 inch High Intensiry EL
FLASH EPROM 2MB
(Screen Memory)
100MHz RISC CPU
Resolution : 320X240 pixels
6 inch TFT Color LCD
FLASH EPROM 2MB
(Screen Memory)
03
GP SERIES
Programmable Operator Interfaces
Multi Unit E
(Model: GP377RT-MLTE41)
*Only for GP-377R
2-Way (via Ethernet)
communication
Printer I/F
CF card support
GP-377S
GP-377L
new face
100MHz RISC CPU
Resolution : 320X240 pixels
6 inch STN Color LCD
FLASH EPROM 1MB
(Screen Memory)
100MHz RISC CPU
Resolution : 320X240 pixels
6 inch Monochrome LCD
FLASH EPROM 1MB
(Screen Memory)
New Low-Cost, High Performance 6 inch Models
Ultra-fast 100MHz
RISC CPU equipped
2 times brighter *1 / 30,000
hours *2 backlight lifetime
Quick startup and screen change for
smooth operation!
3 times faster overall performance. *1
2 times brighter display and 1.5 times
longer backlight lifetime.
High Quality Asian Fonts
Back light Burn-out Detection
Chinese, Korean and
Taiwanese fonts displayed on
GP377 S/L units are,
now, available with smoother
quality of 32X32 dots.
For your safetly operation, the
backlight can be monitored on the
front panel LED with the Touch panel
Input control settings.
China
16X16
*1 Compared to GP-370S and GP-370L.
*2 24 hours/day use at normal operating temperatures.
Korea
32X32
16X16
Taiwan
32X32
04
GP SERIES
Programmable Operator Interfaces
16X16
32X32
GP77 Series Standard Features
Faster
Brighter
Clearer
Fast screen changes for
smooth operation
New 100MHz chip is 3 times
faster!*
Clear viewing
in bright areas
Both TFT and STN displays
are 2 times brighter!*
Create active and
vivid applications
64 color TFT and STN
Displays
The GP77's RISC CPU calls up and opens
screens in a flash, providing smooth,
"no-wait" operation.
The GP77's screens are twise as bright as
GP70 series units, and rival that of a
standart CRT.
The GP77R's easy-to-read 64 color
display allows you to create dynamic
application screens.
* Compared with GP70 series unit running demo
application.
* Compared with GP70 series.
Reduces oveall debugging
and maintenance time
Data transfer is twise as fast
Adjusts to any environment
Select from 4 brifhtness levels*
You can easily adjust the GP77's brightness
level to fit your operation needs.
The GP77R's blistering 115.2 Kbps* speed
cuts your PC to GP data transfer time in a half. * GP-477RE has 2 levels of brightness
It also means you spend your valuable time
maintaining and debugging, instead of waiting
for data download or screens to change.
Alarm types are
recognizable at a glance
3 flashing speeds*
Type R
32 bit RISC CPU POWER
115.2Kbps
V4.0
Screen data ON/OFF blinking speeds
are selectable (slow, medium, fast),
making alarms and data easy to
recognize.
faster
* Available with GP-577RT, GP-577RS and
GP-377RT/S only.
GP70 Series
38.4Kbps
* Some PCs do not support 115.2kbps data transfer
Long - life backlight
High speed GP - to PLC
communication
Built-in 2-port Function
In additionto improved brightness,
backlight lifetime is significantly longer
than GP 70 Series units. Backlights are
also user-replaceable ang easily
changed.*1
GP77 Series supports high speed
RS-232C data transfer (115.2Kbps)
The 2-port function, using the "Data
Transfer Cable", and "Programming I/F
Cable", allows direct connenctions
between GP and Mitsubishi PLC.
This reduces your connection costs.
PLCs supporting 115.2Kbps*
Matsushita FP10SH
Mitsubishi Melcec QnA series
OMRON CS-1
Sharp
JW30 series
* No 2-port adapter required
Programming
tool
GP-377
GP-577
GP-377
GP-377
RT (50,000 hours)*2
RT (40,000 hours)*2
S/L (30,000 hours)*2
RS (25,000 hours)*2
Mitsubishi
PLC
* For more details, please contact your sales
representative or Pro-face.
2-port
adapter
Built-in 2-port
function
Data transfer cable
* 1 exept GP-377RT
* 2 Time required for backlight brightness to
decrease 50%
Ladder
programming
tool
Programming
I/F cable
Mitsubishi PLC
05
GP SERIES
Programmable Operator Interfaces
Programmable Operator Interface revolution!-GP77R Series
Evolving HMI-from PLC's "Face"to its "Brain"
Intelligent operator interface
The GP77R Series
from
Now
Past
Pro-face's GP77R series units help you meet the recent
demands put on the workplace by ISO, PL and HACCP
requirements. Pro-face's new hardware and software
allows you to easily collect vital historical production
maintenence data, and helps you perform esential preventive maintenence.
The newly developed GP77R panel transforms the role of
an HMI from the "face" of the PLC ti its "brain". This adds
up to significant cost and man-hour savings for the management and control of your processing information.
Furthemore, the combination of high-speed I/O control between these units and connectable PLCs, and the GP77R's
enhanced "intelligence" ensures that your applications
perform better than ever.
Network
Open Network
Calculation
Calculation
Data Processing
Data Processing
Data Filing
Data Filing
Communication
Communication
Operator I/F
I/O Control
I/O Control
Operator I/F
Intelligent Features
Data Filing
Logging Function
Communication
Recipe Function
Allows you to easily report production
information directly from your factory floor.
2-Way Communication
Provides production setting data quickly to
PLCs in a Flexible Manufacturing System.
Present values and process conditions can
be easily replaced at any time.
This software allows you to share data
with PLCs with ni network capability, or
between different makes and types of PLCs.
Separarte Programs
Ethernet
Ethernet
Ethernet
PLC
PC
Memory
PC
Back up
Memory
or
CF card*
Memory
Maker A
Maker B
Maker C
Back up
Memory
or
CF card*
Printer
Printer
Single Configuration
Memory
Memory
PLC
PLC
PLC
Memory
Memory
New Products Supporting the GP77R Series Evolution
GP-577RT
GP-577RS
Screen editor software
Data collection software
with Pro-Studio
(PSW-ED01-V20 or higher)
with Pro-Studio
(PSW-ED01-V20 or higher)
Features include the ability to Log and File PLC
information. Helps to reduce PLC ladder
programming processes/steps and amount of
memory used.
This software allows the GP77R to act as
"Ethernet gateway" and provide programless data
communication between a host PC, GP77R and
multiple different PLCs via an Ethernet network.
Large size / Medium size Multi Unit
Expansion Unit
(GP077-MLTE41
(GP377R-MLTE41
GP-377RT
GP-477RE
The optional Multi Unit E
expands the GP77R Series
connenctivity with an
Ethernet I/F. CF card I/F and
Sound output I/F for
P477R/DP577R and
rinter I/F for GP 377RT.
100MHz RISC CPU
Programmable Operator Interface
GP77R Series
06
GP SERIES
Programmable Operator Interfaces
(10BASE-T)
(Model: GP070-ET41)
Photo: Multi Unit E
(Model: GP377R-MLTE41)
This interface unit
allows GP to transmit data with
the host via Ethernet
Network.
2-Way Data Collection Software
Allows you to monitor your production
site information in real time!
Pro-Server with Pro-Studio V2.0
Logging Function
Alarm History Function
Allows you to
easily create
daily and
monthly
reports
Production
Control
Provides
6
Recipe Function
Allows you to
easily give
instructions and
collect data for
production line.
Ensures precise alarm
control. Voice alarm and
alarm displays are
automatically executed.
different types
2
of program-less 2-Way data communication
6
3
Exchanges
data with
network PLCs.
4
5
Sends and
receives PLC
device data via
MS Access.R
Sends and
receives GP
filing data via
MS Excel.R
1
Sends and
receives GPacquired datra
via MS Excel.R
32 bit RISC CPU POWER
Collects PLC
data via
MS Excel. R
Collects
event
data PLC via
MS Access.R
Logging
Data
storage in GP
memory
and/or CF
card
Work/
production
site
information.
Filing
data storage
in GP
memory
and/or
CF card.
Program-less data
communication
Program-less data
communication
Alarm!
A company PLC
B company PLC
Polling (Optimization Function)
Data can be read from multiple GP units simultaneously,
thereby reducing the number of data read requests from
an application. Improves data read perfomance when using
multiple GP units.
Security Function
Passwords are used to prevent data access by personel
other than system administrators, thereby protecting data
from problrms such as device overwriting, etc.
CF Card Transfer Function
Logging, filing and alarm data that has been "filed" via
the GP's screen editor software can be transfered to
another GP77R unit's CF card using an Ethernet network.*
* requires installation of Multi Unit E.
OPC Compatible (OLE for Process Control)
Microsoft's object technology OLE/ActiveX allows
manufacturing related industrial applications to be easily
connected.
Device Monitoring Function
Since PLC devices can be memored by simply selecting
a symbol, on Pro-Studio a simple simulation can be
performed prior to starting an application. With this function,
multiple screens can be displayed at one time, and the IP
address and device address can be input.
07
GP SERIES
Programmable Operator Interfaces
C company PLC
Save Development Time and Space while Improving Operability
Downsize and Simplify Your Application
Using the GP series keep your systems as
possible, even though your control programs get
more and more sophisticated.
The touchpanel graphic operator interface, GP
Series, is a state-of-the-arts intelligent equipment,
which has been widely installed as a main operator
panel throughout the manufacturing fields. You
can operate production systems via numerous
data and graphics displayed on the screen, while
reducing numbers of control programming
and wiring.
Simple Communication Methods
[Direct Access Method]
Simply select your target PLC when you create
screen data. The Direct Access method allows
the GP to communicate with Word and Bit
devices in the PLC memory directly. Since this
method is, also, called as a program-less
communication, there will be no extra load
on the PLC.
[Memory Link Method]
You can create your own communication
programs to connect the GP with your
specialized controllers, such as single-board
computers and PCs. The GP displays data
mapped from the host's memory for monitoring
and operation.
0001
0002
0003
0004
0001
0002
0003
0004
Create Unique Screens in Minutes
You can simply and freely create your own
operation screens for each requirement in
your applications, using a variety of powerful
tools, such as the Part Box, Tags and
D-Script macro program, on the GP-PRO/PB
||| for Windows software. The software creation
of the operator interface also, allows you easy
change, debugging and reue of the data
whenever required
Meter Graphs
ISO-7000 Symbols
Minimize Your Work for Maintenance and System Expansion
After creating data, just download it to the
GP unit, then connect the GP with the host
via a single cable for immediate operation.
Ypu can, also, simulate the GP with your PC
for quick debugging, before you take it to
the field.
08
GP SERIES
Programmable Operator Interfaces
GP Series Screen Editor Software
GP-PRO/PB ||| for Windows Ver.4.0 Version UP Features
1
POINT
Screen Creation and
Editing is Easier and More
Powerful Than Ever
Use Your Device Addresses More Efficiently
Global Cross references!
Maintenence is
easier than ever!
System Upgrades
Ares Easier!
(List Display)
(Map Display)
All of a project's
device addresses can
be checked at a
glance.
Device addresses usage
can also be displayed as
a chart, allowing you to
easily find unused
addresses.
Quickly Check Load Screen nesting Levels
32 bit RISC CPU POWER
Nesting List!
Version 4.0 can create a Nesting List for complex screens
containing multiple Load Screens. This will speed up Your screen
editing as you no longer need to spend time searching for a load
screen's original data.
Try These Userful Functions!!
Enlarge and Move
Objects Via Your
Keyboard Cursor
Fine-tuning the position and
layot of your screen objects on
screen grid points via a mouse
could be difficult. Version 4.0
allows you to use your
keyboard's arrow keys to
enlarge and move objects
easily, making detailed screen
creation and layot easier than
ever.
Direct Entry of Drawing Object
Coordinate Values.
Move by a dot Enlarge by a dot
Cursor Position Zoom.
Enlarges the area whwere the
cursor is currently positioned 3
times, allowing easy editing of
detailed screen drawings.
To change an object's
position or size, just enter
the object's coordinate
values, guaranteeing
100% accurate screen
layot.
Hairline Cursor
Use this cursor as a
standard when you align
screen objects.
Pi!
m
zoo !
up
Font selection and
Mark Screens
Windows fonts can be
imported as character data
to a project's Mark screens
via the font selection function,
allowing you to create
screens with a variety of
types of characters.
Text Images
09
GP SERIES
Programmable Operator Interfaces
2
POINT
Importing/Exporting Project
Alarm Data ImprovesEfficiency
CSV
Format
Alarm Editor Screen
Improve your efficiency by reducing the amount of
repetitious Alarm message editing and registration.
Version 4.0 allows easy editing and document
control via CSV format data.
Using the CSV format, alarm files can be exported to the spread sheet software such as
MS-Excel, where alarm messages can be added and edited more efficiently. Once this
work is completed, these CSV format files can be imported back to GP-PRO/PB||| for
Windows and alarm files.
3
POINT
Extended Logging/Filing/
Programming Functions
[Logging]
[Filing]
Improved Data Collection
via "Looping"
Transferable data items are
increased
When the acquired logging data exceeds the GP's
memory capacity, data logging can continue by
simply overwriting the previosly acquired logging
data. Also, logging data can be saved automatically
to a CF Card with a simple setting.
The number of data items, that can be tranferred
at one time has been increased to 1000 words.
Multible data filing Folders
Multiple folders of filing data can be stored in both
the CF-Card and the GP's international memory.
[D-Script]
GP-X10 Series screen data
can be converted easily
The number of data items, that can be tranferred
Memory Batch Copy
Memory Block Initializatio
Loop Processing
Address Offset Designator
Up loadded from GP-X10
units to GP-PRO/PB||| for
Windows V4.0 directly and
converted for the later GP
models.
rect
di
GP-*10
Screen Data
GP-PRO/PB||| for
Windows v4.0
4
POINT
Expanded Range of
Poweful Tools
[Wide Variety Files of Images]
[Useful Sound Messages]
270 of 64-color Part images are
odded for more sophiticated
screens of your applications.
Redy to use 270 message samples
in the WAV format are provided.
Alarm has occurred.
Confirm status.
Now opening entrance
door.
Starting operation.
Temperature alarm.
Careful - Now rotating.
Add material to hopper.
10
GP SERIES
Programmable Operator Interfaces
Return loweing elevator
to upper limit position.
Now raw materials
available
This card can not be
used.
Conveyer is operating.
GP-PRO/PB||| for Windows Features
Intelligent operator interface
Create Screens in Minutes
1
Parts
Placement
2
32 bit RISC CPU POWER
Select from over 1800
pre-made Parts. Choose
only the ones you need
and place them on your
screens.
High-level funktionalitity
3
Libraries
Muliple objects can be
grouped and registered
for your own library.
Simulation
Tag Setup
A wide variety of user
applications can be easily
created using the Tag
functions (active screen)
More Sophisticated
Programming
4
D-Script
Easy to use Macro
program reduces the
host controller's programming load.
Documentation
Reduces GP program debugging time
[Automatic Documentation]
Even if you don't have a PLC available to test your new
GP program, you can still quickly and easily check whether
the program works as planned via this feature
Reduces time required for creating documents
* This feature is not available with Memory Link selection.
Just by selecting the items you wish to print out, you can
create specification and manual documents easily. You can
also use this feature to export project data in RTF format.
Just select from menu...
All
supported
PLCs
are OK!
Export in RTF format
File Managament
[Project Manager]
Simplifies Project Screen managament
Screen data can be managed via individual screen files.
In addition to moving or copying screen data, simply
doyble-clicking on a file name allows you to edit that
screen. You can also make data files sharable through
your PC network.
11
GP SERIES
Programmable Operator Interfaces
...and print!
Simple Communication Methods
Adjustable Switch Sizes and Layot
20 pixels
Minimum Touch Switch Size: 20X20 pixels
1 or 2 point touch selectable
ON
20 pixels
ON
MANUAL
MONITOR
MANUAL
MONITOR
Parts
[1,800 Part to Choose]
Over 1800 parts and symbols are
stored in the GP-PRO/PB||| library.
Just select the ones you need and
place them onto your application
screens.
Touch/Switches/Lamps/Graphs/Numeric Displays/Picture Displays/
Alarm Displays/Data Displays
Switches
Tank Graphs
Lamps
Library Parts
[Historical Alarm Display]
[Alarm Summary]
Display Types: Active, Historic, Log
Time format: hours, minutes,
and even seconds* can be displayed.
Allows easy machine condition monitoring and fast
maintenence
Alarm Types:
summary display,
message scrolling
Sub. Windows
can be easily set
up for detailed in
matim
* Not supported by GP270 Series
Printout
Display screens can be easily printed
out for daily report.
* Supported only by large-sized GP units
GP377RT series
Sub-Window Image
Detailed information for an individual alarm message can be
displayed in a sub-window. You can easily create an on-line
manual for quick maintenence.
Data Storage
Alarm data can be backed up in GP's
backup memory.
* This feature is supported only by certain largesized GP and GP377 series.
[Picture Display]
[Text Display]
Multiple character sets supported
Fonts: ASC|| (English and European)
Chinese, Japanese, Korean, and
Taiwanese fonts.
Font Styles: Normal, Bold, Raised.
Enable to visualizes entire
systems
Graphics:
Dot, Line, Polyline, Square/
rectangle, Fill, Polygen, Circle,
Oval, Arc, Pie, Scale, Mark,
ISO-7000 Mark Libraries
Attributes:
Lighted, blink, reserve, off
[Image Display]
Photo and CAD images can be imported
[Graph Display]
Various Types of Graphs to Visualize Important Data
Data Foramat: 16-bit absolute/indirect data
Data Display Format: Binary, BCD
Warning Display: direct/indirect
setup for maximum and minimum
ranges
BMP image display
DXF image display
Importable Files
DXF: Common file format for CAD and 3D screens
BMP: Image format for pictures from digital cameras
or image scanners
12
GP SERIES
Programmable Operator Interfaces
Graph Level Status by Colors
Fill-Below-Line for Trend Graph
Tank Graph (Library parts)
Meter Graph (parts)*
* These features not supported by GP270 series
Screen Editing
[Dublicate Copy]
Specifying the nuber of columns and
rows to be muliplied will allow you to
easily make multiple copies of any
object. Addres incrementation can
also be performed automatically.
Dublicate copy
[Active Window]
[Object Drawing]
32 bit RISC CPU POWER
With a rich array of drawing
tools, screens can be drawn
quickly and easily - like CAD
software.
Up to 3 window screens can be
displayed a single base screen,
all simultaneously displaying
animated data.
Global Window: (1/screen) A
common window for all screens
Local Window: (2/screen) Unique
window display for each screen
Screen overlay order can be
changed with a touch.
Enlarging and
reducing
Drawing Area
[Video Display]
Video feeds provide live data
* This feature is only supported by GP-570VM.
Video Display Size: standart
mode, zoom mode
Transparent display of Video
Window
3 NTSC video input channels
VGA disolay (640X480 pixel)
VM screen
VGA screen
Powerful Programming Tools
[Tags]
Tag Features
Tags are used for the creation
of your screen animation
functions. 30 different tag
functions have been prepared
for the GP Series units.
Combinations of these tags
produce a wide variety of
functionallity, allowing you to
expand the scope of your
applications.
Touch Switch
<touch panel input>
<keyboard setup>
<selector switch input>
<inching function>
Numeric Display
<numeric display>
<static data display>
<alarm boundary display>
Graph Display
<graph display>
<static graph display>
<static data display>
Trend Graph Display
Setting Input
<key input<
<keyboard setup>
<alarm boundary>
* Depending on the GP models,
supported Tag features variety.
Alarm Summary
<alarm summary text display>
<alarm summary display>
Alarm Message Display>
Graphic Display
<object drawing>
<library display>
<library static display>
<mark display>
Animated Objects
<free library display>
<moving mark display>
<rail settings>
Character Display
<string display>
<display text data>
Time Display
<time display>
Device Write
<write to device>
Window Display
<window display>
Video Window Display
<video window display>
["D-Script"-Macro
Programming Language]
Implemet a variety of simple
control tasks with this
powerful tool
features include:
Math: +, -, *, /, Remainder,
Assign
Boolean: AND, OR, NOT,
<, <=, >, >=, EQUAL,
NOT EQUAL
Triggers: Timer settings,
Bit Rising, Bit Falling, when
expresion
becomes
True/False
Functions: Load screen,Draw
* Some of the
above
features
are not
supported
by GP-270
13
GP SERIES
Programmable Operator Interfaces
A Wide Range of Supported Data Formats
CF Card Support (Compact Flash)
Sound Output Function
Filing CSV data
An optional unit allows WAV format files
(i.e. sound, alarm) to be imported to the
GP, and played through an external
speaker. This feature can be used in a
variety of applications, such as multimedia, and machine operator information.
Trend data, sampling data and alarm active/history/log data can all be
exported to the CF card using the CSV file format. Database and
spread sheet applications can then easily import this data for
information managament and processing.
Screen Data Storage
A screen project on GP unit can be copied on a CF card for
maintenance purpose. Prior to copying the project to onather GP unit
system, set up on the GP unit is required.
Memory Expansion on CF card
In addition to the internal memory on GP unit, following data can be
stored for GP operation:
Filing Data
Logging Data
Sampling Data
Trend Graph Data
Alarm Data
Image Data
Sound Data
Screen Project Data
* Multi Unit E required
Dynamic Link between Operations and Control
Simple input/output operations can be performed
by merely dragging and dropping. You need no
knowledge of programming.
All the data required for the parts on the screen
(addresses, name plates, and names) are automatically
passed by dragging and dropping
the coresponding cymbols created on the ladder
over the screens of the GP-PRO/PB||| for
Windows. You no longer need to prepare
detailed design specifications to notify
addresses. Thos allows for impelmenting the true
integration of display and control features,
increasing the work efficiency greatly, and
reducing the number of processes significantly.
Pro-Control
Editor V2.0
GP-PRO/PB||| for
Windows V4.0
(under Development)
Universal File Format Support
Reduces data Duplication
BMP
Text
RTF
DXF
CSV (chart)
Ve
rs
Up ion
Screen Data from all previous GP Series can be converted to the latest models, also
14
GP SERIES
Programmable Operator Interfaces
WAV (sound)
Fieldbus Network and Peripherial Connections
Direct Connection to Field Network
[Profibus-DP]
[DeviceNet]
Profibus-DP I/F Unit (GP070-PF11) Device Net Unit (GP070-DN41)
Max.Raud Rate
12Mbps
Max.Node
64
Max.I/O
IN : 64 Words
OUT : 64 Words
Max.Raud Rate
500Kbps
Max.Node
64
Max.I/O
IN : 127 Words
OUT : 127 Words
[Interbus]
Interbus Unit (GP070-IB41)
Max.Raud Rate
500Kbps
Max.Node
512
Max.I/O
IN : 64 Words
OUT : 64 Words
32 bit RISC CPU POWER
[Units Supported]
SIEMENS
SIMATIC S7-300/400 Series, as well as other
Profibus-DP supporting PLCs.
[Ethernet]
[CC-Link]
[DeviceNet]
GP Ethernet I/F Unit <10-Base-T>
(GP070-ET41)
CC-Link I/F Unit (GP070-CL11)
Device Net Unit (GP070-DN41)
Max.Raud Rate
Max.Node
Max.I/O
100Mbps
64
IN : 128 Bits
OUT : 128 Bits
[Units Supported]
Mitsubishi Electric Corp. PLC
MELSEC A Series
MELSEC QnA Series
Max.Baud Rate
Max.Node
500Kbps
64
[Units Supported]
Fuji Electric Co., Ltd.
MICREX-F Series PLC
* The above communication interface modules are only for GP-470 or larger units.
Additional fieldbus Network Units Supported
Fieldbus
AB Remote I/O
AB DH+
ModbusPlus
Module *1
GP Model
QPI-ABR-201
GP47*/57* series GP470/570, GP477R/577R Series
QPJ-ABR-201
GP270/370 series
QPI-ABD-201
GP47*/57* series GP470/570, GP477R/577R Series
QPJ-ABD-201
GP270 series
QPI-MDP-201
GP47*/57* series GP470/570, GP477R/577R Series
QPJ-MDP-201
GP270 series
*1 Manufactured by total Control Products, Inc.
15
GP SERIES
Programmable Operator Interfaces
GP77 Series Standard Features
[Peripheral Device Connections]
Direct Connection to Various Networks
Communication Module Interface
Direct connection to various Feield networks
becomes possible by attaching communication
modules.
Real-time Operation
Communication
Module
Auxiliary Input/ Output (AUX)
(Example: GP-675T Rear face)
From the touch panel, you can send information
to the PLC or to machine's DIO I/F in real time.
Communication Module Interface
(Touch output: 8 points, system alarm output: 1-puint, buzzer
* Only supported by GP-47* or larger units
output: 1-point, remote reset: 1-point)
* Only supported by GP-47* or larger units
Signal Tower
Buzzer, etc.
Communication whit a host Controller
Auxiliary Input/Output (AUX)
Serial (SIO) Interfaces
DC24V Parallel
I/F cable (user made)
* Only supported by GP-470 or larger units
A single cable is all you need for host
communication, reducing maintenance time.
Host Controller
Connecting to a color Printer
Serial Interface
Printer interface
You can printout GP screens while in RUN
mode. Alarm history data, including
trigger/recovery times can also be printed.
RS-232C (Max 15m)
RS-422 (max 600m)
*host controller connection distances differ
PLC
Single board
Computer
Screen Data Transfer
PC
Tool Connector
This interface is used for transfering screen data
createdby GP-PRO/PB Series. Also, you can
connect a bar-code reader to the GP.
Printer
Printer Interface
PC Screen Data
*Only supported by GP-47* or larger units
VGA Input Interface
Your PC's VGA screen can be displayed on
GP 570 VM unit.
Video Display from Cameras
and Recorders
Data Transfer
Cable, etc.
Tool Connector
Data Transfer Cable
Memory Loader ||
Bar-code Reader
NTSC Video Input Interface (3 channels)
NTSC Video images can be displayed in a
window on certain GPs. Window display size
and position can be changed, in addition to
zooming and channel switching, from touch
panel operation or host controller.
Connectable Barcode Readers
(Theese features are only supported by GP-570VM unit.)
Make
Welcome Design
Touch Type
Model 1090
Handheld Type
Model 1240
Foxed Type
Model 1045
(GP-570VM)
VGA Input Interface (3ch)
RGB Cable (commercially available type)
CCD camera, VTR,
TV output, etc.
PC
Only for GP-570VM unit.
16
GP SERIES
Programmable Operator Interfaces
VGA
Interface
Connections
Connections with a PLC
Programless Communication
Host controller
Connections with many different types of PLCs
throughout the world
Data inquiry
PLC
The direct access method supports 76 protocols for PLCs
from 25 manufacturers world wide, meeting diverse
requirements or customers.
I/O
memory
table
Response
Direct Connection with a PLC
Direct Connection with the CPU
Programming Port
Connections with Multiple PLCs
Multi-link Connections
System configuration at low costs
Neither a dedicated device nor a special
program ir required
The supported protocol allows the GP series unit to be connected
directly to the CPU programming port.
Multiple GP series units may be directly connected at
ease to a single host (computer) link unit for PLCs by the
direct access method without using any dedicated device
or special program.
* Applicable PLCs: PLC MELSEC A series/QnA series/FX series of Mitsubishi
Electric Corp.
2-port Adapter II
32 bit RISC CPU POWER
* For multilink connections, it is recommended that our multi-link
cable (GP230-IS12-O) or RS-422 terminal bracket conversion
adapter (GP070-CN10-O) is used.
Host PLC
link unit
Maximum extended length of
RS-422 cable: Max 600 meters
RS-422 cable
(GP230-IS12-O)
GP series
Connected to a peripheral device
This compact adapter allows you to
use both the GP series unit and the
PLC's peripheral units for the efficient
transfer, monitoring, and debugging
of a PLC program.
The direct mode can be selected
for high-speed communication.
Isolated signals via 2 port Adapter II
avoids noise interference to PLC'
CPU.
PLC
programming
software
RS-422 cable
for two-port
adapter II
(GP070-MDCB11)
GP series
* The GP430-IP10-O and GP430-IP11-O are not
applicable
* Applicable PLCs: PLC MELSEC A series/QnA series/FX series
of Mitsubishi Electric Corp.
GP series
(up to 16 units
may be connected)
Memory link expansion capability:
Multiple GP units may be connected to a single personal
computer or microcomputer board.
Graphic data can be transferred from the host controller
to the GP unit.
The transmitted and received data can be checked for errors
including those in check sums, CR, LF, ACK and NAK.
PLC
Single-board
computer
Data
table
Memory
table
Up to 32 GPs may be connected to a single host computer
Barcode reader
GP Maintenence
[Easy Backlight Replacement]
Service personell can easily replace the backlight
right on the factory floor, reducing maintenance time.
* Not available with GP-570L, GP-H70 and GP377RT Series units.
[Screen Data Exchange]
Memory Loader II (GP070-LC01-O)
You can transfer GP screen data to an Flash
Memory Card via on the Memory Loader II.
This allows you to update GP screen data
without a PC. This device is also handy for
duplicating applications.
[IP65f Rating]
* Prior to using this tool, the GP must be set up.
* Please check the version for applicable GP unit.
* Does not include GP-H70 Series unit.
All GP units are suitable for
installation in machines used
in wet or dusty areas.
(Applies to the front panel of
a unit mounted in a flat panel)
17
GP SERIES
Programmable Operator Interfaces
Connectable PLCs and temperatur Controllers
FATEK
Powe Mate-MODEL D
16-MC
FANUC Power Mate (Motion Controller)
FANUC Series
CPU
Direct
20MC
O
F30
F50
F60
F80
F80H
F81
F120
F120H
F120S
F200
F250
F70S
NB1
NB2
NB3
NJ
NS
Fuji
FLEX-PC
Series 90-70
HIDAC EC
S10 mini
Link
O
O
Koyo / PLC Direct
Matsushita
Electric Industrial
SYSMAC CCS1
SYSMAC
O
SYSMAC CV
Multilink
DeviceNet
SYSMAC CS1
ORIM VEXTA
AB SLC500
O
O
O
Rockwell
AB PLC-5
O
O
O
Link
Direct
O
O
O
O
O
O
O
O
O
Series Name
CPU
Link
Direct
KEYENCE
KZ-300
KZ-A500
KZ-350
O
O
O
O
Multilink
O
Shinko
CPU
Link
KOSTAC SG
KOSTAC SU
KOSTAC SZ
KOSTAC SR
DL-205
DL-305
DL-405
SG-8
SU-5/6/6B
SZ-4
SR-21/22
D2-240
D3-330
D4-430/440
O
O
O
O
O
O
O
CPU
Link
SLC-5/01
SLC-5/02
SLC-5/03
SLC-5/04
PLC-5/11
PLC-5/20
PLC-5/30
PLC-5/40
PLC-5/40L
PLC-5/60
PLC-5/60L
O
O
O
O
O
O
O
O
O
Series Name
CPU
Link
Pandac 7000
P7000-PLC-001
P7000-PLC-031H
P7000-PLC-031S
P7000-PLC-A01
O
O
O
O
Ch.O
Matsushita
Electric Works
CPU
MEWNET
FP3/5
FP10(S)
FP1
FP-M
FP10SH
FP2
FPQ-C32CT
FPQ-C16T
Series Name
MELSEC-A
Mitsubishi
MELSEC-F2
MELSEC-FX
MELSEC-QnA
Modicon
Link Direct
O
O
O
O
O
O
O
O
S7-200
S7-300
S7-400
CPU
Link
Direct
A2A
A3A
A2U
A4U
A2U-S1
A2US
AZUS-S1
AZUSH-S1
A2SH
A3U
A0J2
A0J2H
A1N
A2N
A3N
A3H
A2CJ-S3
A1S
A1SH
A1SJ
A2CCPUC24
F2-20M
F2-40M
F2-60M
FX0
FX1
FX2
FX2C
FX2N-64MR
FX2NC-32MT
FXON-60MR
A1FX
FX2N
FX2NC-64MR
Q2A
Q2A-S1
Q2AS
Q2ASH
Q2AS-S1
Q3A
Q4A
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
CPU
Link
O
O
O
O
O
O
O
TOYOPUL-PC3J
O
O
O
O
O
O
O
O
RKC
O
CB Series
O
SR-Mini
O
O
O
O
Yaskawa
Control Pack
Memocon Micro
PROGIC-8
O
O
O
O
O
O
O
Yokogawa
Interbus
O
O
O
O
O
O
O
O
O
Multilink Ethernet
O
O
O
CPU
Link
TCCUH
TCCUL
O
O
CPU
Link
PC2
L2
PC2J
PC3J
O
O
O
O
1:n
O
O
CPU
1:n
CB-100 Z-1021
CB-400 Z-1021
CB-500 Z-1021
CB-700 Z-1021
CB-900 Z-1021
H-RAP-A Z-1021
O
O
O
O
O
O
Link
U84
U84J
U84S
GL40S
GL60S
GL60H
GL70H
GL120
GL130
CP-9200
CP-9200H
CP-9200SH
Micro
PROGIC-8 PC01
MP930
MP920
Memocon SC
O
O
MPI
O
O
O
O
O
O
O
O
O
CPU
Series Name
O
O
O
O
O
O
O
O
O
Direct
Multilink
O
O
O
O
O
O
O
O
O
O
O
Series Name
CPU
Link
Direct
1:n
1:m
n:m
FACTORY ACE
FA500
FAM3
O
O
O
O
O
O
O
Ethernet
O
O
O
Series Name
O
O
O
Series Name
CPU
Direct
Modbus Plus (n:m)
Modbus Master
Modbus Slave
_____
_____
884
984 A/B
O
O
O
O
O
O
884/984
TOYOPUC-PC2
Series Name
O
O
O
O
O
O
O
Series Name
Toyota
O
Profibus
Link
Series Name
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
PROVISOR TC200
Multilink
O
O
O
O
O
O
EX2000
T2E
T2N
T3
T3H
B200CH
B200CUF
B200CURM
B200CUFRM
PROVISOR B
O
O
O
O
O
O
O
O
O
O
CPU
O
Toshiba Machine
Direct
Link
Prgm Port 3964/RK512
90U
95U
100U
115U
135U
155U
CPU212
CPU214
CPU312IFM
CPU313
CPU314
CPU315
CPU315DP
CPU413-2DP
O
O
O
SELMART
Toshiba
Multilink Ethernet CC-Link
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
JW20
JW-32CUH
JW50
JW70
JW100
JW-32CUH1
JW-32CUH3
CPU
PROSEC T
O
O
O
O
O
O
O
O
CPU
PROSEC EX
O
O
O
O
O
O
O
O
SELMART
S5
Multilink
O
O
O
Link
O
Series Name
Series Name
O
O
O
DH+ DH485 Remote I/O Multilink DeviceNet
O
O
O
O
O
O
O
New Satellite JW
Series Name
Siemens
(SIMATIC)
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Series Name
O
Series Name
O
O
O
O
O
Multilink DeviceNet
CPU11
Series Name
Sharp
O
O
O
O
O
O
O
O
O
O
O
O
O
CPU
E1
Series Name
PF2-CPU1
PF2-CPU5M
PF2J-CPU1
PF3S-CP11
PF3S-CP12
PF3S-CP13
MICRO3
FA-2J
O
O
O
O
O
O
Link Direct
C20H
C28H
C40H
C120
C120F
C200H
C200HS
C500
C500F
C1000H
C1000HF
C2000
C2000H
CQM1-CPU11
CQM1-CPU42
CPM1-20CDR-A
SRM1-C02
CPM2A
CS1H
CS1G
C200HX-CPU64
C200HE-CPU42
C200HG-CPU43
C200HX-CPU85-Z
C200HX-CPU44
C200HG-CPU63
C200HE-CPU42-Z
C200HX-CPU64-Z
CV500
CV1000
CVM1
CS1H
CS1G
Series Name
O
O
O
O
O
O
O
O
O
O
O
O
CPU
MICRO3
Keyence
Direct
O
O
O
O
O
EC-40HR
S10min
FA-3S
SYSMAC C
O
O
O
O
O
/2 E
/4 F
H20
H28
H40
H64
H-200
H-252C
H-300
H-700
H-2000
H-2002
H-4010
EH-150
FA-2
Omron
O
Link Direct
2
4
Series Name
Izumi
O
CPU
Series Name
HIDIC-H
O
CPU311/CPU331
CPU731/732
CPU771/772
CPU781/782
Series 90-30
Direct
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
CPU
Series Name
HIDIC-S10
T-Link Link
CPU
CPU
Series Name
O
FACON FB
MICREX-F
Hitachi
Direct
O
Series Name
Series Name
GE Fanuc Automation
Link
CPU
Series Name
Fanuc
Yamataka
18
GP SERIES
Programmable Operator Interfaces
SDC
CPU
1:n
SDC20
SDC21
SDC30
SDC31
SDC40A
SDC40B
SDC40G
O
O
O
O
O
O
O
High Performance Interface GP77 Series
32 bit RISC CPU POWER
GP77 Series
GP-577RT
GP-577RS
GP-477RE
GP-377RT
GP-377S
GP-377L
GP70 Series 9"/10.4"/12.1"
GP-675T
GP-675S
GP-571T
GP-570VM
GP-570S
GP-470E
19
GP SERIES
Programmable Operator Interfaces
GP-570T
GP70 Series 5"/6"
GP-370S
GP-370L
12.1"
10.4"
9"
6"
5"
GP-270S
GP-270L
GP-H70S
GP-H70L
UL/c-UL Approved Units
CE Marked
Units
O
GP675T
GP675S
GP577RT
GP577RS
GP571T
GP570VM
GP570T
GP570S
GP477RE
GP470E
GP377RT
GP377S
GP377L
GP370S
GP370L
GP270S
GP270L
GP-H70S
GP-H70L
O
O
O
TC31-24V
SC31-24V
TC21-24VP
SC21-24VP
O
EG21-24VP
O
O
O
O
O
SC21-24VP
LG21-24VP
O
O
O
EG31-24V
O
O
O
O
O
SC31-24V
LG31-24V
O
O
Global Support Network
Pro-face HMI B.V. Scandinavia
Pro-face HMI B.V.
Europe
31
North
America
2
Asia
26
Pro-face UK
Pro-face America Inc.
Oceania
3
Digital Electrpnics Corp.
Pro-face HMI B.V. France
Pro-face HMI B.V. Germany
Pro-face HMI B.V. Italy
Pro-face Corea Co., Ltd.
Pro-face taiwan Co., Ltd.
20
GP SERIES
Programmable Operator Interfaces
Functional Specifications (GP77 Series Units)
Model
Item
Type
Colors
Backlight
GP577R-TC11
GP577R-TC41-24VP
GP577R-SC11
GP477R-EG11
GP477R-EG41-24VP
TFT Color LCD
STN Color LCD
High Intensity EL
64 colors (Tiling patterns make blends of colors possible)
CCFL (under normal
temperatures and humidity,
lifespan = more than
40 000) User replacable
Amber
CCFL (under normal
temperatures and humidity,
lifespan = more than
25 000) User replacable
GP377-LG11-24V
GP377-LG41-24V
TFT Color LCD
STN Color LCD
Monochrome LCD
64 colors (Tiling patterns make blends of colors possible)
CCFL (under normal
temperatures and
humidity, lifespan =
more than 50 000)
black and white
CCFL (under normal temperatures
and humidity, lifespan = more than
30 000) User replacable.
Resolution
640 x 480 pixels
640 x 400 pixels
320 x 240 pixels
211.2 mm (W) x 158.4 mm (H)
192mm(W)x120mm(H)
115.2 mm (W) x 86.4 mm (H)
Brightness Control
Contrast Control
Blink / Reverse Video
4 levels (via touch panel)
_____
8x8 dot font
No.of
Char 8x16 dot font
Display
16x16 dot font
4 levels (via touch panel)
____
8 levels (via touch panel)
ASCII: (Code Page 850) Alphanumeric (Incl. European fonts) *1
Chinese: (GB2321-80 codes) simpliefied Chinese fonts
Japanese: ANK 158 type, Kanji: 6962 (Standard JIS Type 1 & 2)
Korean: (KSC5601 - 1992 codes) Hangul font
Taiwanese: (Big 5 codes) traditional Chinese fonts
80 characters per row, 60 rows
80 characters per row, 50 rows
40 characters per row, 30 rows
80 characters per row, 30 rows
80 characters per row, 25 rows
40 characters per row, 15 rows
40 characters per row, 30 rows
40 characters per row, 25 rows
20 characters per row, 15 rows
Font sizes
Character size: Height and width can be expanded 1, 2, 4 or 8
Application Memory
Touch Panel (Resistive Film)
2 levels (via touch panel)
8 levels (via touch panel)
Language fonts
32 bit RISC CPU POWER
GP377-SC11-24V
GP377-SC41-24V
Nominal Display Area
Attributes
Display
_____
GP377R-TC11-24V
GP377R-TC41-24V
2MB FLASH EPROM
32x24 Keys / screen; 1 or 2 point touch
1MB FLASH EPROM
16x12 Keys / screen; 1 or 2 point touch
32x20 Keys/screen;1or2 point touch
Serial
Asynchronous transmission method: RS-232C/ RS-422
Data length: 8/7 bits; 2/1 bits; stop bits: 2/1 bits
Parity: None/ Even/ Odd; Data Transmission Rate: 2400 bps to 115.2 kbps
Tool Connector
Asynchronous Transmission Method, TTL level, non-procedural command interface
[during screen development] used for transferring application screen data
[during RUN mode] used as Bar-code Reader of built-in 2-port function interface
Interfaces
Auxiliary Input/
Output (AUX)
Printer Output
Touch switch output
(inching)
System alarm output
Buzzer output
Run output
DC24Vx8 points
DC24Vx1 point
DC24Vx1 point
DC24Vx1 point
____________
____________
Conforms to Centronix (HP LaserJet PCL4 compatible, NEC PR Series, EPSON ESC/P or equivalent)
General Specifications
Item
Model
GP577R-TC11
GP577R-SC11
GP477R-EG11 GP577R-TC41-24VP GP477R-EG41-24VP
GP377R-TC11-24V
GP377R-TC41-24V
GP377-SC11-24V
GP377-SC41-24V
GP377-LG11-24V
GP377-LG41-24V
Input voltage
AC85V to AC132V 50/60Hz
Power Consumption
50VA or less
Electrical Allowable Voltage Drop
Up to 20 ms
Up to 2 ms
AC 1500V -20 mA 1 minute
AC 1000V -10 mA 1 minute (between charging and FG terminals)
Voltage Endurance
Insulation Resistance
Ambient Operating
Temperature
Ambient Storage
Temperature
Ambient Humidity
Environmental
0ºC to 40ºC
0ºC to 50ºC
0ºC to 40ºC
0ºC to 50ºC
20W or less (TVP 13W)
Above 10MW at DC500V
(between charging and FG terminals)
Above 20MW at DC500V
(between charging and FG terminals)
0ºC to 40ºC
0ºC to 50ºC
-10ºC to 60ºC
30 to 85% RH
(non-condensing)
-20ºC to 60ºC
20 to 85% RH 30 to 85% RH
(non-condensing) (non-condensing)
20 to 85% RH
(non-condensing)
10 to 25 Hz (X, Y, Z directions 30 minutes each 2G)
Noise voltage: 1200Vp-p
Pulse length: 1 µs; Arise Time: 1ns
Noise voltage: 1000Vp-p
Pulse length: 1 µs; Arise Time: 1ns
Atmosphere
Must not contain corrosive gas
Rating
Equivalent to IP65f (Limited to front face of GP installed in panel)
External
Dimensions
Structural
50W or less (TVP 20W)
Above 10MW at DC500V (between charging and FG terminals)
Vibration Resistance
Noise Immunity
(via noise simulator)
DC20.4V to DC27.6V
Weight
317mm(W)x243mm(H)
x85mm(D)
(GP unit only)
Less than 3.5 kg (GP unit only)
274mm(W)x216mm(H) 317mm(W)x243mm(H) 274mm(W)x216mm(H)
x56.5Dmm(D)
(GP unit only)
x85Dmm(D)
(GP unit only)
x56.5Dmm(D)
(GP unit only)
Less than 2.5kg
(GP unit only)
Less than 3.5kg
(GP unit only)
Less than 2.5kg
(GP unit only)
Cooling Method
*1 Japanese character input requires the Japanese version screen editor software.
Natural air circulation
21
GP SERIES
Programmable Operator Interfaces
171mm(W)x138mm(H)x57mm(D)
(GP unit only)
Less than 0.95 kg (GP unit only)
Functional Specifications (10.4" and 12.1" Display)
Model
Items
GP675-TC11
GP675-TC41-24VP
GP570-TV11
Type
8 colors (white, red, blue, green, yellow, purple, light blue, black)
Tiling patterns make blends of colors possible
CCFL (under normal temperatures
and humidity, lifespan = 20 000
hours) User replacable
Colors
Backlight
64 colors (Tiling patterns make blends of colors possible)
CCFL (under normal temperatures
and humidity, lifespan = 25 000
hours) Non-replacable by user
Resolution
640x480 pixels
800x600 pixels
Nominal Display Area
211mm(W)x158mm(H)
246mm(W)x184.5mm(H)
Blank / Reverse Video
Contrast Adjustment
____
No. of
Char.
Display
8 levels from touch panel
ASCII: (Code page 850) Alphanumeric (Incl. European fonts) *1
Chinese: (GB2321-80 codes) simplified Chinese fonts
Japanese: ANK 158 type, Kanji: 6962 (Standard JIS Type 1 & ?)
Korean: (KSC5601 - 1992 codes) Hangul font
Taiwanese: (Big 5 codes) Traditional Chinese fonts
Language Fonts
8 x 8 dot font
80 characters per row, 60 rows
100 characters per row, 75 rows
8 x 16 dot font
80 characters per row, 30 rows
100 characters per row, 37 rows
16 x 16 dot font
40 characters per row, 30 rows
50 characters per row, 37 rows
Font sizes
Character size: Height and Width can be expanded 1, 2, 4 or 8 times
Application Memory
1MB FLASH EPROM
2MB FLASH EPROM
Auxiliary Input / Output (AUX)
32x24 keys / screen;
40x50 keys / screen; 1 or 2 point touch
1 or 2 point touch
Acynchronous transmission method: RS-232C/ RS-422; Data length: 8/7 bits; stop bits: 2/1 bits;
Parity: None/ Even/ Odd; Data Transmission Rate: 2400 to 38400 bps
Asynchronous Transmission Method, TTL level, non-procedure command interface
<during screen development> used for downloading application screens
<during RUN mode> used as Bar-code Reader interface
Touch Switch Output: DC24Vx8 points; System Alarm Output: DC24Vx1 point; Buzzer Output: DC24Vx 1 point
RUN output: DC24Vx1 point; Remote Reset Input: DC24Vx1 point
Printer Output
Conforms to Centronix (HP LaserJet PCL4 compatible, NEC PR Series, EPSON ESC/P or equivalent)
Touch Panel (Resistive Film)
Serial
Interface
STN Color LCD
CCFL (under normal temperatures
and humidity, lifespan = 25 000
hours) User replacable
Features
Display
GP675-SC11
TFT Color LCD
Tool Connector
General Specifications
Model
Items
Electrical
Power Consumption
50VA or less
Allowable Voltage Drop
Up to 20ms
GP675-TC11: AC85 to AC132V 50/60 Hz
GP675-TC41: DC19.2V to DC28.8V
GP675-TC11: 50W or less
GP675-TC41: 50VA or less
GP675-TC11: Up to 20 ms
GP675-TC41: Up to 2 ms
Voltage Endurance
AC1500V 20mA 1 minute
(between changing and FG terminals)
GP675-TC11: AC1500V 20mA 1minute
GP675-TC41: AC1000V 10mA 1 minute
(between charging and FG terminals)
Input Voltage
AC85 to AC132V 50/60 Hz
Insulation Resistance
Environmental
Structural
GP675-TC11
GP675-TC41-24VP
GP570-TV11
GP675-SC11
AC85 to AC132V 50/60 Hz
AC1500V 20mA 1minute
(between changing and FG terminals)
50VA or less
Up to 20ms
Above 10MW at DC500V (between changing and FG terminals)
Operation Temperature
0ºC to 40ºC
Storage Temperature
-10ºC to 60ºC
Ambient Humidity
30 to 85% RH (non-condensing)
Vibration Resistance
Noise Immunity
(via noise simulator)
Atmosphere
10 to 25 Hz (X, Y, Z directions 30 minutes 2G)
Noise voltage: 1200Vp-p(GP675-TC41: 1000Vp-p) Pulse length: 1 µs Arise time: 1 ns
Rating
Equivalent to IP65f (Limited to front face of GP installed in panel)
Must not contains corrosive gas
External Dimensions
317mm(W)x243mm(H)x85mm(D) (GP only)
Weight
Less than 3.5 kg (GP only)
346mm(W)x272mm(H)x81mm(D) (GP only)
Less than 3.8 kg (GP only)
Cooling Method
Natural Air Circulation
VM Display Specifications
Items
Model
GP570-TV11
Display Colors
32768 colors
Input Channels
3 channels
Transmission Method
NTSC
Video
Display
Number of Video Screens
1 (size, location and channel are adjustable)
Color Control
tone, brightness anc contrast
Special Features
still (freezes video display), transparent color settings, and zoom
Input Signal Method
Analog RGB
Synchronous Signal
TTL level, negative true or positive true
Input Signal
Characteristics
Scanning Type
Non-interlaced
Flicker
8 level
Brightness
4 level
Adjustment
Controls Horizontal Display Positioning
-16 to 15 pixels
Vertical Display Positioning
-8 to 7 pixels
Resolution
640x480 pixels
Dot-clock Range
25.175 MHz +/- 1%
* Japanese character input require the Japanese version screen editor software
22
GP SERIES
Programmable Operator Interfaces
Functional Specifications
Model
Items
GP571-TC11
Type
GP570-TC**
TFT Color LCD
64 colors (Tiling patterns make
blends of colors possible)
Color
GP470-EG**
STN Color LCD
Monochrome LCD
High Intensity EL
black and white
Amber (monochrome)
CCFL (under normal temperatures
and humidity, lifespan - 25 000
hours) Non-replacable by user
____
8 colors (white, red, blue, green, yellow, purple, light blue, black)
(Tiling patterns make blends of colors possible)
Resolution
640 x 480 pixels
640 x 400 pixels
Nominal Display Area
211mm(W)x158mm(H)
192mm(W)x120mm(H)
Features
Blink / Reverse Video
Brightness Control
____
8 levels from touch panel
____
ASCII: (Code Page 850) Alphanumeric (incl. European fonts) *1
Chinese: (GB2321 - 80 codes) simplified Chinese fonts
Japanese: ANK 158 type, Kanji: 6962 (Standard JIS Type 1 & 2)
Korean: (KSC5601 - 1992 codes) Hangul font
Taiwanese: (Big 5 codes) traditional Chinese fonts
Language Fonts
No. of
Char.
Display
2 levels from touch panel
____
Contrast Control
8 x 8 dot font
80 characters per row, 60 rows
80 characters per row, 50 rows
8 x 16 dot font
80 characters per row, 30 rows
?0 characters per row, 25 rows
16 x 16 dot font
40 characters per row, 30 rows
40 characters per row, 25 rows
Font Size
32 bit RISC CPU POWER
GP570-LG**
CCFL (under normal temperatures and humidity, lifespan - 20 000 hours) *1
User replacable
Backlight
Display
Functions
GP-570-SC**
Character Size: Height and Width can be expanded 1, 2, 4 or 8 times
Application Memory
3MB FLASH EPROM
1MB FLASH EPROM
32x20 keys / screen;
1 or 2 point touch
Asynchronous transmission method: RS-232C/ RS-422; Data length: 8/7 bits; stop bits: 2/1 bits;
Serial
Parity: None/ Even/ Odd; Data Transmission Rate: 2400 to 38400
Asynchronous Transmission Method, TTL level, non-procedure command interface
Tool Connector
<during screen development> used for downloading application screens
<during RUN mode> used as Bar-code Reader interface
Interfaces
Touch
Switch
Output:
DC24Vx8points;
System Alarm Output: DC24Vx1point; Buzzer Output: DC24Vx1point
Auxiliary Input / Output (AUX)
RUN Output: DC24Vx1point; Remote Reset Input: DC24Vx1point
Touch Panel (Resistive Film)
Printer Output
32 x 24 keys / screen: 1 or 2 point touch
Conforms to Centronix (HP LaserJet PCL4 compatible, NEC PR Series, EPSON ESC/P or equivalent)
General Specifications
Model
Items
Input Voltage
Power Consuption
Electrical
GP571-TC11
GP570-LG**
GP470-EG**
AC85 to AC132V 50/60Hz
GP570-*C11: AC85 to AC132V 50/60Hz
GP-570-*C21/ *C31: DC19.2 to DC28.8V
DC19.2V toDC28.8V
GP470-EG11: AC85 to AC132V 50/60Hz
GP470-EG21/ EG31: DC19.2 to DC28.8V
50VA or less
GP570-*C11: 50VA or less
GP-570-*C21/ *C31: 50W or less
GP570-*C11: Up to 20ms
GP-570-*C21/ *C31: Up to 2ms
50W or less
GP470-EG11: 50VA or less
GP470-EG21/ EG31: 50W or less
GP570-TC**
Allowable Voltage Drop
Up to 20ms
Voltage Endurance
AC1500V 20mA 1minute
(between changing and
FG terminals)
Insulation Resistance
GP570-*C11: AC1500V 20mA 1minute
GP-570-*C21/ *C31: AC1000V 10mA 1 minute
(between changing and FG terminals)
AC1000
0ºC to 50ºC
-10ºC to 60ºC
Ambient Humidity
Structural
Specifications
GP470-EG11: Up to 20ms
GP470-EG21/ EG31: Up to 2ms
GP470-EG11: AC1500V 20mA 1 minute
GP470-EG2124VP/ EG31-24VP:
AC1000V 10mA 1 minute
(between charging and FG terminals)
0ºC to 40ºC
Storage Temperature
30 to 85% RH (non-condensing)
Vibration Endurance
Noise Endurance
Up to 2ms
Above 10MW at DC500V (between the wire and ground terminals)
Operation Temperature
Environmental
Specifications
GP570-SC**
20 to 85% RH (non-condensing)
10 to 25 Hz (X, Y, Z directions 30 minutes 2G)
Noise voltage: 1200Vp-p;
Pulse length: 1µs;
Arise Time: 1ns
Noise voltage: GP570-*C11: 1200Vp-p.
GP570-*C21-24VP/ *C31-24VP: 1000Vp-p
Pulse length: 1µs; Arise Time: 1ns
Noise voltage: 1000Vp-p;
Pulse length: 1µs;
Arise Time: 1ns
Atmosphere
Must not contain corrosive gas
Rating
Equivalent to IP65f (Limited to front base of GP installed in panel)
Noise voltage: GP470-EG11: 1200Vp-p.
GP470-EG21-24VP/ EG31-24VP: 1000Vp-p;
Pulse length: 1µs; Arise Time: 1ns
External Dimensions (mm)
317mm(W)x243mm(H)x85mm(D) (GP only)
274mm(W)x216mm(H)
x56.5mm(D)
(GP only)
Weight
Less than 3.5 kg (GP only)
Less than 2.5 kg (GP only)
Cooling System
Natural Air Circulation
1) With GP570-TC21-24VP units that are Rev. E or later, the estimated lifetime of the backlight is 40 000 hours (assuming 24 hour operation).
2) Japanese character input require the Japanese version screen editor software
23
GP SERIES
Programmable Operator Interfaces
Functional Spetifications (Medium Size Display Units)
Model
GP370-SC**-24V*
GP370-LG**-24V*
Type
STN Color LCD
Color
8 colors (white, red, blue,
green, yellow, purple, light blue,
black) Tiling patterns make
blends of colors possible
Items
GP270-SC**-24V*
GP270-SC**-24V*
Monochrome LCD
STN Color LCD
black and white
8 colors (white, red, blue,
green, yellow, purple, light blue,
black) Tiling patterns make
blends of colors possible
Resolution
Monochrome LCD
STN Color LCD
Monochrome LCD
black and white
8 colors (white, red, blue,
green, yellow, purple, light blue,
black) Tiling patterns make
blends of colors possible
black and white
CCFL (under normal temperatures
and humidity, lifespan = 25 000
hours) Non-replacable by user
320 x 240 pixels
Nominal Display Area
115mm(W)x86mm(H)
96mm(W)x72mm(H)
Features
115mm(W)x86mm(H)
Blink / Reverse Video
Brightness Control
2 levels from touch panel
__________
Contrast Control
8 levels from touch panel
Language Fonts
ASCII: (Code Page 850) Alphanumeric (incl. European fonts) *1
Chinese: (GB2321 - 80 codes) simplified Chinese fonts
Japanese: ANK 158 type, Kanji: 6962 (Standard JIS Type 1 & 2)
Korean: (KSC5601 - 1992 codes) Hangul font
Taiwanese: (Big 5 codes) traditional Chinese fonts
No. of
Char.
Display
8 x 8 dot font
40 characters per row, 30 rows
8 x 16 dot font
40 characters per row, 15 rows
16 x 16 dot font
20 characters per row, 15 rows
Font Size
Character Size: Height and Width can be expanded 1, 2, 4 or 8 times
Application Memory
1MB FLASH EPROM
256KB FLASH EPROM
Touch Panel (Resistive Film)
1MB FLASH EPROM
16x12 keys/screen; 1 or 2 point touch
Function Keys
Operation Switches
Push Button Switch
Interfaces
GPH70-LG**-24V
CCFL (under normal temperatures and humidity, lifespan = 20 000 hours)
User replacable
Backlight
Display
Functions
GPH70-SC**-24V
__________
12
__________
One is located on the back of the case; the other
is the front face's function swithc (OP.) key
__________
Push-Lock (E-Stop) type switch
Serial
Asynchronous transmission method: RS-232C/ RS-422; Data length: 8/7 bits; stop bits: 2/1 bits;
Parity: None/ Even/ Odd; Data Transmission Rate: 2400-38400 bps
Tool Connector
RS-232C Acynchronous Transmission Method, TTL level, non-procedure command interface
<during screen development> used for downloading application screens
<during RUN mode> used as Bar-code Reader interface
External Outputs
DOUT: Two-point Open Controller: 5-24VDC, 50mA max
OP: One-point Controller: 5-24VDC, 50mA max
Buzzer: One-point Controller: 5-24VDC, 0.1-0.3A
Push-Lock Switch: Single B-contact, rated 30VDC, 0.3A
__________
General Specifications
Model
Items
GP370-SC**-24V*
GP370-LG**-24V*
GP270-SC**-24V*
Input Voltage
Power Consumption
Electrical
20W or less (TYP10W)
12W or less (TYP8W)
Voltage Endurance
AC1000V 10mA 1 minute (between the live wire and ground terminals) *2
Insulation Resistance
Above 20MW at DC500V (between the live wire and ground terminals)
0ºC to 60ºC
0ºC to 40ºC
Storage Temperature
-20ºC to 60ºC
Ambient Humidity
20 to 85% RH (non-condensing)
Vibration Endurance
10 to 25 Hz (X, Y, Z dimensions 30 minutes 2G)
Noise Endurance
Noise voltage: 1000Vp-p
Pulse length: 1µs
Arise time: 1ns
Rating
GPH70-LG**-24V
12W or less (TYP10W)
Up to 2ms
Atmosphere
Structural
Specifications
GPH70-SC**-24V
Allowable Voltage Drop
Operation Temperature
Environmental
Specifiactions
GP270-SC**-24V*
DC20.4V to DC27.6V
Must not contain corrosive gas
Equivalent to IP65f (Limited to front face of GP installed in panel)
Equivalent to IP63
External Dimensions (mm)
171mm(W)x138mm(H)x57mm(D) (GP only)
172mm(W)x127mm(H)x58mm(D) (GP only)
237mm(W)x173mm(H)x52mm(D) (GP only)
Weight
Less than 0.9 kg (GP only)
Less than 0.8 kg (GP only)
Less than 0.87 kg (GP only)
Cooling System
Natural Air Circulation
*1 Japanese character input require the Japanese version screen editor software
*2 With GPH70-**41-24V untits, the allowable power failure is AC500V, 10mA for 1 minute
24
GP SERIES
Programmable Operator Interfaces
Optional Items
Screen Editor Software
GP-PRO/PB|||
for Windows
2-Way Comunicator Pro-Server with
Pro-Studio
for Windows
Data Transfer Cable
Memory Loader ||
(Memory card included)
Item
Catalog
code
GPW-PB01M-V40
for PLC commimication
RS-232C Cable (5m)
PSW-ED01-V20
GPW-CB02
for PLC commimication
RS-422 Cable (5m)
GP070-LD-O
for GP-H70 Series
RS-232C Cable (3m)
for GP-H70 Series
RS-422 Cable (3m)
Item
Catalog
code
GP320-IS11-O
GP23--IS12-O (For Multi-link)
GP410-IS00-O
(some PLCs require a different cable)
userful for multi-link connection
RS-422 Connector
Terminal Exchange Adapter
for easy debugging
Mitsubishi PLC
A Series/QnA Series
FX Series
2 Port Adapter ||
32 bit RISC CPU POWER
Item
Catalog
code
GPH70-C232-O
GP070-CN10-O
GPH70-C422-O
RS-422 Cable
for 2 Port Adapter ||
GP070-MD11
direct connection to programming port
Mitsubishi A Series PLC
Programming I/F
Cable (5m)
GP070-MDCB11
direct connection to programming port
Mitsubishi FX Series PLC
Programming I/F
Cable (5m)
direct connection to programming port
Siemens S5 Series PLC
Programming I/F
Cable (5m)
Item
Catalog
code
Item
GP430-IP10-O
connector type
RS-232C Cable
for GP-H70
Series With
D-SUB
connector (3m)
Catalog
code
GP430-IP11-O
for GP-H70
RS-232C
Conversion
Adapter
GPH70-D232
for GP-H70
RS-422
Conversion
Adapter
connector type
RS-422 Cable
for GP-H70
Series With
D-SUB
connector (3m)
GPH70-AP232-O
CF Card
GP000-IS11-O
GPH70-D422
CF Card Front Maintenance Unit
GPH70-AP422-O
Protective Screen Cover
Item
Catalog
code
GP077-CF10 (8MB)
GP077-CF20 (16MB)
Cover Sheets
GP070-CFFM10
GP370-DC10
(Under development)
Backlight Bulbs
User's Manual
GP675S-BL00-MS
GP675T-BL10-MS
GP570-BL00-MS *1
GP577RT-BL00-MS
GP370-BL00-MS
GP270-BL00-MS
GP-H70(S/L)
GP-270(S/L)
GP-370(S/L)
GP-470E
GP-570(T/S/L)
GP-571T
GP-675T
GP-477R/577R
GP-377R
GP-377(S/L)
Item
Catalog
code
Soft Type
10 sheets / set
GP570-COVER-10P
GP470-COVER-10P
GP570/577-COVER-10P
GP470/477-COVER-10P
20 sheets / set
GP370-COVER-20P
GP270-COVER-20P
Hard Type
5 sheets / set
GP675-DF10-O
GP570-DF10-O
GP470-DF10-O
GP570/577-DF10
GP470/477-DF10
10 sheets / set
GP370-DF10-O
GP270-DF10-O
GPH70-DF10-O
*1 With GP570-TC21-24VP units that are Rev. E or
later, use backlight
model: GP577RT-BL00-MS
25
GP SERIES
Programmable Operator Interfaces
GPH70-MM11-STD-ENG
GP270-MM11-ENG
GP370-MM11-ENG
GP470/570-MM21-ENG
GP470/570-MM21-ENG
GP470/570-MM21-ENG
GP675-MM21-ENG
GP477R/577R-MM11-ENG
GP377R-MM11-ENG
GP377-MM11-ENG
Operation Enviroment for Software
GP-PRO/PB||| Windows
Pro-Server with Pro-Studio
PC
IBM Compatible
PC
IBM Compatible
OS Version
MS-Windows 95/98/NT
OS Version
MS-Windows 95/98/NT
Memory
16MB, or higer
Memory
16MB, or higer
30MB minimum
Disk Space
10MB or higer
53MB maximum *1
Mouse
Windows 95/98/NT compatible
Disk Space
Mouse
Windows 95/98/NT compatible
Printer
Windows 95/98/NT compatible
Printer
Windows 95/98/NT compatible *2
Ethernet
10BASE-2/5T
*1 40MB maximum for CD-ROM version
*1 Printers with only Windows drivers cannot be used.
Protocol
TCP/IP
Others
Ethernet Hub, Ethernet cable
External Dimensions (mm)
GP-675
GP-675S
GP-571T
GP-570VM
GP-570T
GP-570S
GP-570L
301
331.0
7.5
Panel Cut-out
81
259
346
Panel Cut-out
85
(top)
+1
-0
7.5
227
+0.5
-0.5
302+0.5-0.5
243
123.5+1-0
275
272
317
under 4-R2
(front)
under 4-R2
(side)
(front)
GP-477RE
GP-470E
(side)
GP-377RT
GP-377S
GP-377L
155.5
258
(top)
Panel Cut-out
56.5
274
7.5
228
(top)
GP-577RT
GP-577RS
GP-377S
GP-370L
(top)
Panel Cut-out
57
5
171
156+1-0
+1
-0
under 4-R3
under 4-R2
(front)
(side)
(front)
GP-270S
GP-270L
(side)
GP-H70S
GP-H70L
52
157.5
Panel Cut-out
58
+0.5
-0
112.5
127
under 4-R3
(front)
(top)
237
MAX68
158+0.5-0
173
5
172
113
(top)
123.5
123.0
138
201
216
200
+1
-0
259
(side)
(front)
26
GP SERIES
Programmable Operator Interfaces
(side)
The
Family-HMI yhat you can count on
Flat Panel Display
FP Series
Panel Computer PL Series
IBM Compatible Industrial Panel Computers
PL-X900 Ñåðèÿ
PL-6700 Ñåðèÿ
PL-3700S
PL-5700 Ñåðèÿ
Panel Displays that can replace your CRT, keyboard
and mouse, and save valuable space
FP-570T
Äèñïëåé VGA
FP-770T/FP-775S
Äèñïëåé XGA
Graphic Panel GP Series
PL-B900 Ñåðèÿ
Programmable Operator Interface for Industrial Controllers
Graphic Logic Controller
GLC Series
Programmable Operator Interface with I/O
control features.
GP77R ñåðèÿ
GP70 ñåðèÿ
100 MHz RISC CPU è
32 áèò RISC CPU
2 ñïîñîáà ïîäêëþ÷åíèÿ ê ñåòè
Pro-Control ðåäàêòîð
GLC300T
GLC100 Ñåðèÿ
Klinkmann - total solution for HMI
Wonderware InTouch is with 150.000
installations world leading HMI/SCADA PC
software. InTouch is part of Wonderware
FactorySuite , which offers also Industrial
SQL Server automation database,
SuiteVoyager automation internet portal,
Terminal erver thin client server, InControl
SoftPLC etc.
Klinkmann's development develop interface
and wireless automation software for
various automation devices incl.
Siemens, ABB, Profibus, Interbus and
thernet. Klinkmann software is used in
over 60 countries araound the world.
POB 38
FIN-00371 Helsinki, Finland
ph. int. +358-9-540 4940
fax int. +358-9-541 3541
e-mail:
automation@klinkmann.fi
WEB : www.klinkmann.com
GP-PRO/PB III
Äëÿ Windows
Ýêðàííûé ðåäàêòîð