130.com.ua

KDC-3051R

KDC-3051G

KDC-3051RY

KDC-3051GY

KDC-315A

KDC-315R

KDC-3251RY

CD-RECEIVER

INSTRUCTION MANUAL

AMPLI-TUNER LECTEUR DE CD

MODE D’EMPLOI

РAДИОПРИЕMНИК С KOMПAKT–ДИСKAMИ

ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ

АВТОМАГНІТОЛА

ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ

This symbol mark indicates that Kenwood manufactured this product so as to decrease harmful influence on the environment.

Изделие изготовлено в Mалайзии

GET0671-001A (EW/E2W)

2

CONTENTS Safety

Safety 2

WARNING

Stop the car before operating the unit.

Preparation 4

How to attach/detach the faceplate

How to reset your unit

Initial settings before operations

Basic operations

Getting started

Canceling the display demonstration

Setting the demonstration mode

Adjusting the clock

Listening to the radio

Adjust [SETTINGS] mode settings

5

6

6

Important to know...

To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit.

Caution: Adjust the volume so that you can hear sounds outside the car. Driving with the volume too high may cause an accident.

Condensation: When the car is airconditioned, moisture may collect on the laser lens. This may cause disc read errors.

In this case, remove the disc and wait for the moisture to evaporate.

This unit can only play the CDs with:

Listening to a disc 8

Selecting Repeat Play

Selecting Random Play

Selecting Scan Play

Selecting a folder/track/file

Listening to the other external components 9

The illustrations in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the illustrations may differ from what appears on the actual equipment.

If you experience problems during

Function settings 10

130.com.ua

Installation/connection 12

installation, consult your Kenwood dealer.

When you purchase external components, check with your Kenwood dealer to make sure that they work with your model and in your area.

Detailed information and notes about the

Warning

Caution playable audio files are stated in an online manual on the following site: www.kenwood.com/cs/ce/audiofile/

Installing the unit

Specifications 15

Autogood products Internet store “130”

The marking of products using lasers

Declaration of Conformity with regard to the EMC Directive 2004/108/EC

Manufacturer:

Kenwood Corporation

2967-3 Ishikawa-machi, Hachioji-shi, Tokyo,

192-8525 Japan

The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.

EU Representative’s:

Kenwood Electronics Europe BV

Amsterdamseweg 37, 1422 AC UITHOORN,

The Netherlands

This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State.

For Turkey

Bu ürün 26891sayılı Resmi Gazete’de yayımlanan Elektrikli ve Elektronik Eşyalarda

Bazı Zararlı Maddelerin Kullanımının

Sınırlandırılmasına Dair Yönetmeliğe uygun olarak üretilmiştir.

Information on Disposal of Old Electrical and Electronic Equipment and Batteries

(applicable for EU countries that have adopted separate waste collection systems)

Products and batteries with the

This product complies with Directive,

Number 26891 regarding “REGULATION ON

THE RESTRICTION OF THE USE OF CERTAIN

HAZARDOUS SUBSTANCES IN LECTRICAL

AND ELECTRONIC EQUIPMENT”.

symbol (crossed-out wheeled bin)

Muting upon the reception of a

cannot be disposed as household waste.

Old electrical and electronic

130.com.ua

waste byproducts.

phone call

To use this feature, connect the MUTE lead to your telephone using a commercial telephone accessory. (page 13, 14)

When a call comes in, “CALL” appears.

The audio system pauses.

Contact your local authority

To continue listen to the audio system for details in locating a recycle during a call, press SRC. “CALL” facility nearest to you. Proper disappear and the audio system resumes.

recycling and waste disposal will

When a call ends, “CALL” disappear.

help conserve resources whilst

The audio system resumes.

preventing detrimental effects on our health and the environment.

Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

Autogood products Internet store “130” 3

Preparation

How to attach/detach the faceplate

2

1

2

Do not expose the faceplate to direct sunlight, excessive heat, or humidity. Also avoid places with too much dust or the possibility of water splashing.

Keep the faceplate in its casing while detached.

1

The faceplate is a precision piece of equipment and can be damaged by shocks or jolts.

To prevent deterioration, do not touch the terminals of the unit and faceplate with your fingers.

How to reset your unit

If this unit fails to operate properly, press the reset button.

The unit returns to factory settings when the reset button is pressed.

Reset button

4

Initial settings before operations

1 Press SRC to enter [STANDBY] mode.

2 Press the volume knob to enter [FUNCTION] mode.

3 Turn the volume knob to select [INITIAL SET], then press to enter.

4 Turn the volume knob to make a selection, then press to confirm.

See table below for selection.

5 Hold to finish the procedure.

Item

KEY BEEP

Selectable setting (Preset: *)

PRESET TYPE NORM *: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/ LW). ; 130.com.ua

RUSSIAN SET ON: Folder name, file name, song title, artist name, album name are displayed in Russian (if applicable). ;

OFF *: Cancels.

P-OFF WAIT Sets the duration when the unit will automatically turns off (while in standby mode) to save the battery.

–––– : Cancels ; 20M *: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes

BUILTIN AUX ON1 *: Outputs sound of the connected external component when “AUX” is selected as the source. ;

ON2: Outputs sound from the connected external component when “AUX” is selected as the source. When you turn on the power, the sound attenuates (to prevent noise when no external component is connected). Turn the volume knob clockwise to return to the previous volume level. ; OFF: Disables “AUX” in source selection.

CD READ 1 *: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play as a music CD.

SWITCH PRE REAR */ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on the rear of the unit (through an external amplifier).

SP SELECT OFF */ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance.

[SWITCH PRE] is selectable only with KDC-3051R/ KDC-3051G/ KDC-315A/ KDC-315R/ KDC-3251RY.

Autogood products Internet store “130”

Basic operations

Loading slot

Detaches the faceplate Display window

Ejects the disc

Volume knob

The following indicator lights up when...

ST: A stereo broadcast is received (FM).

IN: A disc is in the unit.

Auxiliary input jack

TI: Traffic Information function is turned on.

RDS: RDS service is available.

When you press or hold the following button(s)...

Button

SRC

Volume knob

(turn)

Volume knob

(press)

BAND

4 / ¢

SCRL DISP

General operation

Turns on.

Turns off if pressed and held.

Selects the available sources (TUNER, CD, AUX, STANDBY), if the power is turned on.

• If the source is ready, playback also starts. “CD” is selectable only when a disc is loaded.

Adjusts the volume level.

Selects items.

130.com.ua

Selects the FM bands (FM1/ FM2/ FM3) or MW/ LW.

Selects the next folder.

Pauses/resumes playback of a disc.

Mutes the sound while listening to a radio or an external component connected to the auxiliary input jack.

Searches for a radio station.

Selects track/file.

Fast-forwards/reverses tracks if pressed and held.

Changes the display information.

Scrolls the display information if pressed and held.

Enters clock adjustment mode directly (page 6) if pressed and held while in clock display screen.

Returns to the previous item.

Exit from setting mode if pressed and held.

Autogood products Internet store “130” 5

Getting started

Canceling the display demonstration

3 Turn the volume knob to select [ON] or

[OFF].

The display demonstration is always turned on unless you cancel it.

starts if no operation is done for about

20 seconds.

4 Hold to finish the procedure.

When you turn on the power (or after you reset the unit), the display shows:

[CANCEL DEMO] \ [PRESS] \

[VOLUME KNOB]

1 Press the volume knob.

[YES] is selected as the initial setup.

2 Press the volume knob again to confirm.

[DEMO OFF] appears.

If no operation is done for about

15 seconds or if you turn the volume knob to select [NO] in step 2, [DEMO MODE] appears and the display demonstration starts.

Setting the demonstration mode

Adjusting the clock

1 Press the volume knob to enter

[FUNCTION] mode.

2 Turn the volume knob to select

[SETTINGS], then press to enter.

3 Turn the volume knob to select [CLOCK], then press to enter.

4 Turn the volume knob to select

[CLOCK ADJ], then press to enter.

Clock hour flashes on the display.

5 Turn the volume knob to adjust the hour, then press to enter minute adjustment.

Clock minutes flashes on the display.

6 Turn the volume knob to adjust the minute, then press to confirm.

1 Press the volume knob to enter

[FUNCTION].

2 Turn the volume knob to select

[DEMO MODE], then press to enter.

hour and minute adjustment.

7 Hold to finish the procedure.

130.com.ua

Hold to turn on or off the Traffic Information function (not applicable if “MW/ LW” is selected).

6

Hold for about 2 seconds to memorize the current station or the selected Program

Type. (Refer to [PTY SEARCH] on page 7 to select the Program Type.)

Press briefly to recall memorized station (or Program Type after entering the PTY search mode).

Autogood products Internet store “130”

1 Press SRC to select “TUNER.”

2 Press BAND repeatedly to select a band (FM1/ FM2/ FM3/ MW/ LW).

3 Press

4 / ¢ to search for a station.

Adjust [SETTINGS] mode settings

While listening to the radio...

1 Press the volume knob to enter [FUNCTION] mode.

2 Turn the volume knob to select [SETTINGS], then press to enter.

3 Turn the volume knob to make a selection, then press to confirm.

See table below for selection.

4 Hold to finish the procedure.

Item

LOCAL SEEK

SEEK MODE

Selectable setting (Preset: *)

ON: Searches only FM stations with good reception. ; OFF *: Cancels.

Selects the tuning mode for

4 / ¢ buttons.

AUTO1 *: Automatically search for a station. ; AUTO2: Search in the order of the stations in the preset memory. ; MANUAL: Manually search for a station.

AUTO MEMORY YES: Automatically starts memorizing 6 stations with good reception. ; NO *: Cancels (automatic memorizing is not activated). (Selectable only if [NORM] is selected for [PRESET TYPE].) (page 4)

MONO SET ON: Improves the FM reception (but the stereo effect may be lost). ; OFF *: Cancels (stereo effect resumes).

PTY SEARCH Selects the available Program Type (see table below). Then, press

4 / ¢ to start searching.

Press the volume knob to enter PTY language selection. Turn the volume knob to select the PTY language

(ENGLISH */ FRENCH/ GERMAN), then press to confirm.

NEWS SET 0M – 90M: Sets the time for receiving the next news bulletin. ; OFF *: Cancels.

AF SET ON *: Automatically searches for another station broadcasting the same program in the same RDS network with better reception when the current reception is poor. ; OFF: Cancels.

RDS REG

ATP SEEK

ON *: Switches to another station only in the specific region using the “AF” control. ; OFF: Cancels.

ON *: Automatically searches for a station with better reception when the traffic information's reception is poor. ; OFF: Cancels.

130.com.ua

[NEWS SET/ AF SET/ RDS REG/ ATP SEEK] is selectable only when the source is “FM.” If other playback source is selected, these settings are selectable under [RDS SET] item. (page 11)

Available Program Type:

SPEECH

DRAMA

MUSIC

CULTURE

LIGHT M (music) CLASSICS

RELIGION PHONE IN

OLDIES

NEWS

SCIENCE

AFFAIRS

VARIED

OTHER M (music) WEATHER

TRAVEL LEISURE

FOLK M (music) DOCUMENT

INFO

FINANCE

JAZZ

SPORT

POP M (music) ROCK M (music) EASY M (music)

CHILDREN

COUNTRY

EDUCATE

SOCIAL

NATION M (music)

The unit will search for the Program type categorized under [SPEECH] or [MUSIC] if selected.

[SPEECH] : White character item. ; [MUSIC] : Black character item.

The RDS feature won't work where the service is not supported by any broadcasting station.

If the volume is adjusted during reception of traffic information, the adjusted volume is memorized automatically. It will be applied the next time Traffic Information function is turned on.

Autogood products Internet store “130” 7

Listening to a disc

Ejects the disc. (“NO DISC” appears and “IN” indicator goes off.)

8

Press to select track/file.

Hold to fast-forwards/reverses.

Press to select folder.

1 Press SRC to turn on the power.

2 Insert a disc into the loading slot.

Playback starts automatically.

3 Press to resume/pause playback (if necessary).

Selecting Repeat Play

Press number button 4 (REP) repeatedly to make a selection.

Selecting Scan Play

Press number button 2 (SCAN) repeatedly to make a selection.

Audio CD : TRAC (track) REPEAT, Audio CD : TRAC (track) SCAN, SCAN OFF

REPEAT OFF MP3/WMA : FILE SCAN, SCAN OFF

MP3/WMA : FILE REPEAT, FOLD (folder) If scan play is selected, the unit starts

REPEAT, REPEAT OFF

Selecting Random Play

130.com.ua

repeatedly to make a selection.

playing the first 10-second intro of the music in the disc or the current folder. If

“SCAN OFF” is selected, the unit resumes normal play of the current song.

Selecting a folder/track/file

Audio CD : DISC RANDOM, RANDOM OFF

1 Press to enter Music Search mode.

MP3/WMA : FOLD (folder) RANDOM,

“SEARCH” appears, then the current file

ALL RANDOM, RANDOM OFF name appears on the display.

Press and hold number button

2 Turn the volume knob to select a folder/

3 (ALL RDM) to select “ALL RANDOM” only track/file, then press to confirm.

if “RANDOM OFF” is selected initially.

To return to the root folder (or first track for audio CD), press BAND.

To return to the previous folder, press .

To cancel the Music Search mode, press and hold .

< or > on the display indicates that preceded/next folder is available.

Autogood products Internet store “130”

Discs that cannot be used

Discs that are not round.

Discs with coloring on the recording surface or discs that are dirty.

You cannot play a Recordable/ReWritable disc that has not been finalized. (For the finalization process refer to your disc writing software, and your disc recorder instruction manual.)

3-inch CD cannot be used. Attempt to insert using an adapter can cause malfunction.

Listening to the other external components

Preparation : Make sure [ON1] or [ON2] is selected for [BUILTIN AUX]. (page 4)

Auxiliary input jack

3.5 mm stereo mini plug

(optional accessory)

1 Press SRC to select “AUX.”

2 Turn on the external component and start playing.

130.com.ua

Maintenance

Portable audio device

(optional accessory)

Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to observe this precaution may result in damage to the monitor or unit.

Cleaning the connector: Wipe off dirt on the connector of the unit and faceplate. Use a cotton swab or cloth.

Handling discs

Do not touch the recording surface of the disc.

Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

Do not use any accessories for the disc.

Clean from the center of the disc and move outward.

Clean the disc with a dry silicon or soft cloth. Do not use any solvents.

When removing discs from this unit, pull them out horizontally.

Remove the rims from the center hole and disc edge before inserting a disc.

Autogood products Internet store “130” 9

Function settings

1 Press the volume knob to enter [FUNCTION] mode.

2 Turn the volume knob to select [AUDIO CTRL] or [SETTINGS], then press to enter.

3 Turn the volume knob to make a selection, then press to confirm.

See table below for selection.

Repeat step 3 until the desired item is selected/activated.

Press to return to the previous item.

4 Hold to finish the procedure.

[AUDIO CTRL] : While listening to any source except in STANDBY state...

10

Item Selectable setting (Preset: *)

SUB-W LEVEL –15 — +15 (Preset: 0): Adjusts the subwoofer output level.

BASS BOOST B.BOOST LV1 */ B.BOOST LV2: Selects your preferred bass boost level. ; OFF: Cancels.

SYSTEM Q NATURAL */ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ GAME: Selects a preset sound mode suitable to the music genre. (Selects [USER] to use the customized bass, middle, and treble settings.)

BASS ADJUST BASS C FRQ: 60/ 80/ 100 */ 200: Selects the center frequency.

BASS LEVEL: –8 — +8 (Preset: 0): Adjusts the level.

BASS Q FCTR: 1.00 */ 1.25/ 1.50/ 2.00: Adjusts the Q factor.

BASS EXTEND: ON: Turns on the extended bass. ; OFF *: Cancels.

MID ADJUST MID C FRQ: 0.5K/ 1.0K */ 1.5K/ 2.5K: Selects the center frequency.

MID LEVEL: –8 — +8 (Preset: 0): Adjusts the level.

MID Q FCTR: 0.75/ 1.00 */ 1.25: Adjusts the Q factor.

TRE ADJUST TRE C FRQ: 10.0K/ 12.5K */ 15.0K/ 17.5K: Selects the center frequency.

TRE LEVEL: –8 — +8 (Preset: 0): Adjusts the level.

BALANCE

FADER

SUB-W SET

DETAIL SET

L15 — R15 (Preset: 0): Adjusts the left and right speaker output balance.

R15 — F15 (Preset: 0): Adjusts the rear and front speaker output balance.

LPF SUB-W:

130.com.ua

higher than 85 Hz/ 120 Hz/ 160 Hz are cut off.

SUB-W PHASE: REV (180°)/ NORM (0°) *: Selects the phase angle of the subwoofer output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than

[THROUGH] is selected for [LPF SUB-W].)

SUPREME SET: ON *: Creates realistic sound by interpolating the high-frequency components that are lost in MP3/WMA audio compression. ; OFF: Cancels. (Selectable only when playback an MP3/

WMA disc.)

VOL OFFSET:

(Preset: 0)

–8 — +8 (for AUX) ; –8 — 0 (for other sources): Presets the volume adjustment level of each source. The volume level will automatically increase or decrease when you change the source. (Before making an adjustment, select the source you want to adjust.)

KDC-3051R/ KDC-3051G/ KDC-315A/ KDC-315R/ KDC-3251RY only:

[SUB-W LEVEL/ SUB-W SET/ LPF SUB-W/ SUB-W PHASE] is selectable only if [SWITCH PRE] is set to [SUB-W]. (page 4)

[SUB-W LEVEL/ LPF SUB-W/ SUB-W PHASE] is selectable only if [SUB-W SET] is set to [ON].

Select a source before making a source tone memory adjustment, [BASS ADJUST/ MID ADJUST/ TRE ADJUST].

Autogood products Internet store “130”

[SETTINGS]

Item Selectable setting (Preset: *)

AUX NAME AUX */ DVD/ PORTABLE/ GAME/ VIDEO/ TV: Selects the desired name for the connected component.

(Selectable only if “AUX” is selected as the source.)

CLOCK CLOCK ADJ: (For details, see page 6.)

TIME SYNC: ON *: Synchronizes the RDS station time data and the unit's clock. ; OFF: Cancels.

DISPLAY

RDS SET

DIMMER SET: ON: Dims the display illumination. ; OFF *: Cancels.

TEXT SCROLL: AUTO/ ONCE: Selects to scroll the display information automatically, or scroll only once. ;

OFF *: Cancels.

NEWS SET/ AF SET/ RDS REG/ ATP SEEK: Selectable only if any source other than tuner source is selected.

(For details, refer page 7.)

Troubleshooting

Symptom Remedy/Cause

Sound cannot be heard.

“PROTECT” appears and no operations can be done.

The unit does not work at all.

[P-OFF WAIT] does not work.

Radio reception is poor. / Static noise while listening to the radio.

“IN” flashes.

Adjust the volume to the optimum level. / Check the cords and connections.

Check to be sure the terminals of the speaker leads are covered with insulating tape properly, then reset the unit. If “PROTECT” does not disappear, consult your nearest service center.

Reset the unit.

Turn off the demonstration mode. (page 6)

Connect the antenna firmly. / Pull the antenna out all the way.

CD-R/CD-RW cannot be played back and tracks cannot be skipped.

Disc sound is sometimes interrupted.

“NA FILE” appears.

“NO DISC” appears.

“TOC ERROR” appears.

The CD player is not operating properly. Reinsert the disc properly. If the condition did not improve, turn off the unit and consult your nearest service center.

Insert a finalized CD-R/CD-RW (finalize with the component which you used for recording).

Stop playback while driving on rough roads. / Change the disc. / Check the cords and 130.com.ua

The CD is quite dirty. / The CD is upside-down. / The CD is scratched a lot. Try another disc instead.

“ERROR 99” appears.

“COPY PRO” appears.

Noise is generated.

Tracks cannot play back as you have intended them to play.

The unit is malfunctioning for some reason. Press the reset button on the unit. If the

“ERROR 99” code does not disappear, consult your nearest service center.

A copy-protected file is played.

Skip to another track or change the disc.

Playback order is determined when files are recorded.

“READING” keeps flashing.

Longer readout time is required. Do not use too many hierarchies and folders.

Elapsed playing time is not correct. This is caused by how the tracks are recorded.

Correct characters are not displayed

(e.g. album name).

This unit can only display letters (upper case), numbers, and a limited number of symbols.

Cyrillic alphabets (upper case) can also be displayed if [RUSSIAN SET] is set to [ON].

(page 4)

Autogood products Internet store “130” 11

12

Installation/connection

1 Remove the key from the ignition switch, then disconnect the

· terminal of the car battery.

2 Make proper input and output wire connections.

\ “Wiring connection” (page 13, 14)

3 Install the unit to your car.

\ “Installing the unit” (page 14)

4 Reconnect the

· terminal of the car battery.

5 Reset the unit. (page 4)

Caution

Part list:

A Faceplate.............................................................. (×1)

B Escutcheon ......................................................... (×1)

C Mounting sleeve ............................................. (×1)

D Casing for faceplate ...................................... (×1)

E Wiring harness .................................................. (×1)

F Removal tool .................................................... (×2)

Basic procedure

Warning

If your car's ignition does not have an ACC position, connect the ignition wires to a power source that can be turned on and off with the ignition key. If you connect the ignition wire to a power source with a constant voltage supply, as with battery wires, the battery may die.

Do not use your own screws. Use only the screws provided.

Install this unit in the console of your vehicle. Make sure the faceplate will not hit the lid of the console (if any) when closing and opening.

After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly.

Mount the unit so that the mounting angle is 30° or less.

If the fuse blows, first make sure the wires aren't touching to cause a short circuit, then replace the old fuse with one with the

The unit can only be installed in a car with a 12 V DC power supply, negative ground.

If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis

130.com.ua

through the fuse box.

terminals to which they correspond. The unit may be damaged or fail to work if you share the · wires or ground them to any metal part in the car.

When only two speakers are being connected to the system, connect the connectors either to both the front output

Disconnect the battery's negative terminal

Connect the speaker wires correctly to the terminals or to both the rear output and make all electrical connections before same rating.

terminals (do not mix front and rear).

installing the unit.

Do not touch the metal part of this unit

Insulate unconnected wires with vinyl tape during and shortly after the use of the or other similar material. To prevent a short unit. Metal part such as the heat sink and circuit, do not remove the caps on the ends enclosure become hot.

of the unconnected wires or the terminals.

Mounting and wiring this product requires

Be sure to ground this unit to the car's skills and experience. For safety's sake, leave chassis again after installation.

this work to professionals.

If you experience problems during installation, consult your Kenwood dealer.

Autogood products Internet store “130”

Wiring connection

For KDC-3051R/ KDC-3051G/ KDC-315A/ KDC-315R/ KDC-3251RY

KDC-3051R/ KDC-3051G/

KDC-315A/ KDC-315R

KDC-3251RY

Front output terminals

Rear/subwoofer output terminals

Rear/subwoofer output terminals

Antenna terminal (JASO)

Fuse (10 A)

Light blue/yellow

(Steering remote control wire)

Blue/White

(Power control/motor antenna control wire)

Brown

(Mute control wire)

KDC-3051R/ KDC-3051G/ KDC-315A/ KDC-315R: To the steering wheel remote control adapter (optional accessory)

To the power control terminal when using the optional power amplifier, or to the antenna control terminal in the vehicle.

To the terminal that is grounded when either the telephone rings or during conversation. (To connect the Kenwood navigation system, consult your navigation manual.)

Yellow (Battery wire)

Red (Ignition wire)

Red (A7)

Yellow (A4)

Connecting the ISO connectors on some VW/Audi or

Opel (Vauxhall) automobiles

130.com.ua

Ignition wire

(Red) A7 (Red)

Unit Vehicle

A4 (Yellow) Battery wire

(Yellow)

ISO connectors

Default wiring

A4

A5

A7

A8

Pin

Yellow

Blue/White

Red

Black

Color and function

Battery

Power control

Ignition (ACC)

Earth (ground) connection

Pin

B1 / B2

B3 / B4

B5 / B6

B7 / B8

Color and function

Purple ª / Purple/black ·

Gray ª / Gray/black ·

White ª / White/black ·

Green ª / Green/black ·

Rear speaker (right)

Front speaker (right)

Front speaker (left)

Rear speaker (left)

Autogood products Internet store “130” 13

For KDC-3051RY/ KDC-3051GY

Antenna terminal (JASO)

Fuse (10 A)

White (+) / White/black (–) : To front speaker (left)

Gray (+) / Gray/black (–) : To front speaker (right)

Green (+) / Green/black (–) : To rear speaker (left)

Purple (+) / Purple/black (–) : To rear speaker (right)

Blue

(Motor antenna control wire)

To the antenna control terminal in the vehicle.

Blue/White

(Power control wire)

To the power control terminal when using the optional power amplifier.

Brown

(Mute control wire)

To the terminal that is grounded when either the telephone rings or during conversation. (To connect the Kenwood navigation system, consult your navigation manual.)

Car fuse box Ignition key switch

Red (Ignition wire)

Yellow (Battery wire)

Car fuse box

Black (Ground wire)

Installing the unit

1

Battery

To the metallic body or chassis of the car 130.com.ua

Connect the wiring harness to the unit. Other wiring connection has been completed earlier. (page 13, 14)

2

Before attaching, make sure the direction of the escutcheon is correct. (Wider hooks on the top side.)

14

Dashboard of your car

Bend the appropriate tabs to hold the mounting sleeve firmly in place.

Autogood products Internet store “130”

Removing the unit

1 Detach the faceplate.

2 Engage the catch pin on the removal tools into the holes on both sides of the escutcheon, then pull it out.

3 Insert the removal tools deeply into the slots on each side, then follow the arrows instructions as shown on the right.

Specifications

FM tuner section

Frequency range (50 kHz space):

87.5 MHz — 108.0 MHz

Usable sensitivity (S/N = 26 dB): 1.0 μV/75 Ω

Quieting sensitivity (DIN S/N = 46 dB): 2.5 μV/75 Ω

Frequency response (±3 dB): 30 Hz — 15 kHz

Signal-to-Noise ratio (MONO): 63 dB

Stereo separation (1 kHz): 40 dB

MW tuner section

Frequency range (9 kHz space):

531 kHz — 1 611 kHz

Usable sensitivity (S/N = 20 dB): 36 μV

LW tuner section

Subject to change without notice.

Audio section

Maximum output power: 50 W × 4

Output power (DIN 45324, +B = 14.4 V): 30 W × 4

Tone 100 Hz ±8 dB

Middle: 1 kHz ±8 dB

Treble: 10 kHz ±8 dB

For KDC-3051R/ KDC-3051G/ KDC-315A/ KDC-315R/

KDC-3251RY:

Preout level / load (CD): 2 000 mV/10 kΩ

Auxiliary input section

Frequency response (±3 dB): 20 Hz — 20 kHz

Input maximum voltage: 1 200 mV

CD player section

Digital filter (D/A): 8 Times Over Sampling

General

Operating voltage (11 V — 16 V allowable): 14.4 V

Maximum current consumption: 10 A

Installation size (W × H × D):

182 mm × 53 mm × 158 mm

Wow & Flutter: Below Measurable Limit

Frequency response (±1 dB): 20 Hz — 20 kHz

Total harmonic distortion (1 kHz): 0.01 %

Signal-to-Noise ratio (1 kHz): 105 dB

Layer-3

Media Audio

About Audio file

Playable Audio file: MP3 (.mp3), WMA

(.wma)

Playable disc media: CD-R/RW/ROM

Playable disc file format: ISO 9660 Level

1/2, Joliet, Romeo, Long file name.

Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media or device.

Autogood products Internet store “130” 15