Renesas M3T-FLX-144NSD datasheet: pdf

M3T-FLX-144NSD
Converter Board for Connecting FLX160 to 144-pin 0.5-mm-pitch LQFP
User’s Manual
Notes regarding these materials
1. This document is provided for reference purposes only so that Renesas customers may select the appropriate
Renesas products for their use. Renesas neither makes warranties or representations with respect to the
accuracy or completeness of the information contained in this document nor grants any license to any
intellectual property rights or any other rights of Renesas or any third party with respect to the information in
this document.
2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising
out of the use of any information in this document, including, but not limited to, product data, diagrams, charts,
programs, algorithms, and application circuit examples.
3. You should not use the products or the technology described in this document for the purpose of military
applications such as the development of weapons of mass destruction or for the purpose of any other military
use. When exporting the products or technology described herein, you should follow the applicable export
control laws and regulations, and procedures required by such laws and regulations.
4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and
application circuit examples, is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas products listed in this
document, please confirm the latest product information with a Renesas sales office. Also, please pay regular
and careful attention to additional and different information to be disclosed by Renesas such as that disclosed
through our website. (http://www.renesas.com )
5. Renesas has used reasonable care in compiling the information included in this document, but Renesas
assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information
included in this document.
6. When using or otherwise relying on the information in this document, you should evaluate the information in
light of the total system before deciding about the applicability of such information to the intended application.
Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any
particular application and specifically disclaims any liability arising out of the application and use of the
information in this document or Renesas products.
7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas
products are not designed, manufactured or tested for applications or otherwise in systems the failure or
malfunction of which may cause a direct threat to human life or create a risk of human injury or which require
especially high quality and reliability such as safety systems, or equipment or systems for transportation and
traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication
transmission. If you are considering the use of our products for such purposes, please contact a Renesas
sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above.
8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below:
(1) artificial life support devices or systems
(2) surgical implantations
(3) healthcare intervention (e.g., excision, administration of medication, etc.)
(4) any other purposes that pose a direct threat to human life
Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who
elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas
Technology Corp., its affiliated companies and their officers, directors, and employees against any and all
damages arising out of such applications.
9. You should use the products described herein within the range specified by Renesas, especially with respect
to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or
damages arising out of the use of Renesas products beyond such specified ranges.
10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific
characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use
conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and
injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for
hardware and software including but not limited to redundancy, fire control and malfunction prevention,
appropriate treatment for aging degradation or any other applicable measures. Among others, since the
evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or
system manufactured by you.
11. In case Renesas products listed in this document are detached from the products to which the Renesas
products are attached or affixed, the risk of accident such as swallowing by infants and small children is very
high. You should implement safety measures so that Renesas products may not be easily detached from your
products. Renesas shall have no liability for damages arising out of such detachment.
12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written
approval from Renesas.
13. Please contact a Renesas sales office if you have any questions regarding the information contained in this
document, Renesas semiconductor products, or if you have any other inquiries.
CAUTION
Renesas Tools Homepage
Rev.2.00
Jun. 01, 2007
REJ10J0184-0200
If the requirements shown in the "CAUTION" sentences are ignored,
the equipment may cause personal injury or damage to the products.
http://www.renesas.com/en/tools
(1/4)
1. Outline
The M3T-FLX-144NSD is a converter board for connecting the
160-core flexible cable FLX160 to a foot pattern for 144-pin
0.5-mm-pitch LQFP (144P6Q-A).
2. Package Components (See Figure 1)
M3T-FLX-144NSD
YQPACK144SD
YQ-GUIDE's (x4)
NQPACK144SD-ND
(1) M3T-FLX-144NSD converter board............................. x1
(2) YQPACK144SD (made by Tokyo Eletech Corporation) .................. x1
(3) NQPACK144SD-ND (made by Tokyo Eletech Corporation) ......... x1
(4) YQ-GUIDE's ............................................................... x4
Figure 1 Package components of the M3T-FLX-144NSD
(5) M3T-FLX-144NSD User's Manual (This manual)
(1) For debugging
3. Specifications
Table 1 Specifications
Applicable package
144P6Q-A (144-pin
0.5-mm-pitch LQFP)
Insertion/removal
iterations of connector
50 times guaranteed
Emulation pod probe
(2) For onboard evaluation
M3T-FLX-144NSD
4. Usage (See Figure 2)
The M3T-FLX-144NSD can be used for debugging and
board-mounted evaluation in common by mounting the
NQPACK144SD-ND on the user system.
HQPACK144SD
(separately available)
YQ-GUIDE's (x4)
(1) For debugging
Mount the NQPACK144SD-ND on the foot pattern of the
user system and attach the YQPACK144SD on it. And
connect the probe of the emulation pod to the upper
connector of the M3T-FLX-144NSD. Then connect the
YQPACK144SD and the M3T-FLX-144NSD.
YQPACK144SD
MCU with on-chip flash memory
or one-time PROM
NQPACK144SD-ND
(2) For onboard evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HQPACK144SD (separately available) in
that order on the NQPACK144SD-ND on the user system.
144-pin 0.5-mm-pitch
(144P6Q-A) foot pattern
Before using the M3T-FLX-144NSD, be sure to read "7.
Precautions" on page 4.
●Position of No.1 pin
Be sure to align the pins.
Figure 2 Usage of the M3T-FLX-144NSD
(2/4)
5. Connection Procedure (See Figure 3)
The procedure for connecting the M3T-FLX-144NSD is shown
below.
(1) Mount the NQPACK144SD-ND on the user system.
Emulation pod probe
(2) Attach the YQPACK144SD on the NQPACK144SD-ND.
(4)
(3) Secure the four corners of the YQPACK144SD with the
YQ-GUIDE's.
● Do not use the screws included with the
M3T-FLX-144NSD
YQPACK144SD.
(5)
● Do NOT use the screwdriver included with the
Use a slotted screwdriver.
NQPACK144SD-ND that is used only for the
HQPACK144SD. It is not for the YQ-GUIDE's.
(3)
YQ-GUIDE's (x4)
(4) Attach the probe of the emulation pod to the M3TYQPACK144SD
FLX-144NSD.
(5) Connect M3T-FLX-144NSD to the emulator probe.
(2)
NQPACK144SD-ND
(1)
144-pin 0.5-mm-pitch
(144P6Q-A) foot pattern
●Position of No.1 pin
Be sure to align the pins.
Figure 3 Connection procedure of the M3T-FLX-144NSD
6. External Dimensions and a Sample Foot Pattern
55.00
19.00
IC1
23.00
0.25
CN2
72
109
37
144
36
1
M3T-FLX-144NSD REV.A
73
108
c
MADE IN JAPAN
CN1
40.00
21.80
0.50
5.30
19.00
23.00
16.50
Unit: mm
Figure 4 External dimensions and a sample foot pattern of the M3T-FLX-144NSD
(3/4)
7. Precautions
CAUTION
Caution to Be Taken for This Product:
z When connecting the YQPACK144SD, be sure to use the included YQ-GUIDE's.
z Do NOT use the screws included with the YQPACK144SD for connecting the YQPACK144SD.
IMPORTANT
Notes on This Product:
z We cannot accept any request for repair.
z For purchasing the NQPACK144SD-ND, YQPACK144SD, HQPACK144SD, contact the following:
Tokyo Eletech Corporation
http://www.tetc.co.jp/e_tet.htm
z For inquiries about the product or the contents of this manual, contact your local distributor.
Renesas Tools Homepage
http://www.renesas.com/en/tools
* NQPACK, YQPACK, YQSOCKET, YQ-GUIDE, HQPACK, TQPACK and TQSOCKET are trademarks of Tokyo Eletech
Corporation
8. Correspondence of Connectors CN1 and CN2
Table 2 Correspondence of the connectors
CN1
IC1
CN1
IC1
CN2
IC1
CN2
IC1
CN1-01a
CN1-02a
CN1-03a
CN1-04a
CN1-05a
CN1-06a
CN1-07a
CN1-08a
CN1-09a
CN1-10a
CN1-11a
CN1-12a
CN1-13a
CN1-14a
CN1-15a
CN1-16a
CN1-17a
CN1-18a
CN1-19a
CN1-20a
CN1-21a
CN1-22a
CN1-23a
CN1-24a
CN1-25a
CN1-26a
CN1-27a
CN1-28a
CN1-29a
CN1-30a
CN1-31a
CN1-32a
CN1-33a
CN1-34a
CN1-35a
CN1-36a
CN1-37a
CN1-38a
CN1-39a
CN1-40a
-
17
15
13
11
9
7
5
3
1
-
143
141
139
137
135
133
131
129
127
-
125
123
121
119
117
115
113
111
109
-
107
105
103
101
99
97
95
93
91
CN1-01b
CN1-02b
CN1-03b
CN1-04b
CN1-05b
CN1-06b
CN1-07b
CN1-08b
CN1-09b
CN1-10b
CN1-11b
CN1-12b
CN1-13b
CN1-14b
CN1-15b
CN1-16b
CN1-17b
CN1-18b
CN1-19b
CN1-20b
CN1-21b
CN1-22b
CN1-23b
CN1-24b
CN1-25b
CN1-26b
CN1-27b
CN1-28b
CN1-29b
CN1-30b
CN1-31b
CN1-32b
CN1-33b
CN1-34b
CN1-35b
CN1-36b
CN1-37b
CN1-38b
CN1-39b
CN1-40b
18
16
14
12
10
8
6
4
2
-
144
142
140
138
136
134
132
130
128
-
126
124
122
120
118
116
114
112
110
-
108
106
104
102
100
98
96
94
92
-
CN2-01a
CN2-02a
CN2-03a
CN2-04a
CN2-05a
CN2-06a
CN2-07a
CN2-08a
CN2-09a
CN2-10a
CN2-11a
CN2-12a
CN2-13a
CN2-14a
CN2-15a
CN2-16a
CN2-17a
CN2-18a
CN2-19a
CN2-20a
CN2-21a
CN2-22a
CN2-23a
CN2-24a
CN2-25a
CN2-26a
CN2-27a
CN2-28a
CN2-29a
CN2-30a
CN2-31a
CN2-32a
CN2-33a
CN2-34a
CN2-35a
CN2-36a
CN2-37a
CN2-38a
CN2-39a
CN2-40a
-
20
22
24
26
28
30
32
34
36
-
38
40
42
44
46
48
50
52
54
-
56
58
60
62
64
66
68
70
72
-
74
76
78
80
82
84
86
88
90
CN2-01b
CN2-02b
CN2-03b
CN2-04b
CN2-05b
CN2-06b
CN2-07b
CN2-08b
CN2-09b
CN2-10b
CN2-11b
CN2-12b
CN2-13b
CN2-14b
CN2-15b
CN2-16b
CN2-17b
CN2-18b
CN2-19b
CN2-20b
CN2-21b
CN2-22b
CN2-23b
CN2-24b
CN2-25b
CN2-26b
CN2-27b
CN2-28b
CN2-29b
CN2-30b
CN2-31b
CN2-32b
CN2-33b
CN2-34b
CN2-35b
CN2-36b
CN2-37b
CN2-38b
CN2-39b
CN2-40b
19
21
23
25
27
29
31
33
35
-
37
39
41
43
45
47
49
51
53
-
55
57
59
61
63
65
67
69
71
-
73
75
77
79
81
83
85
87
89
-
(NC: No connection)
(4/4)