OWNER’S MANUAL
Network Blu-ray Disc™/
DVD Player
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
BD560C
P/NO : MFL62881820
BD561-N-BCANLLK-ENG.indd 1
http://www.lg.ca
2010.1.22 8:31:24 PM
BD561-N-BCANLLK-ENG.indd 2
2010.1.22 8:31:27 PM
Safety Information
1
Safety Information
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK) NO USERSERVICEABLE PARTS INSIDE REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing) instructions
in the literature accompanying the product.
Cautions and Warnings
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
BD561-N-BCANLLK-ENG.indd 3
3
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try
to open the enclosure. Visible laser radiation when
open. DO NOT STARE INTO BEAM.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact
replacement part by an authorized service centre.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention
to plugs, wall outlets, and the point where the cord
exits the appliance. To disconnect power from the
mains, pull out the mains cord plug. When installing
the product, ensure that the plug is easily accessible.
2010.1.22 8:31:27 PM
4
Safety Information
This device is equipped with a portable battery or
accumulator.
1
Safety Information
Safety way to remove the battery or the battery
from the equipment: Remove the old battery
or battery pack, follow the steps in reverse order
than the assembly. To prevent contamination of
the environment and bring on possible threat
to human and animal health, the old battery or
the battery put it in the appropriate container at
designated collection points. Do not dispose of
batteries or battery together with other waste.
It is recommended that you use local, free
reimbursement systems batteries and accumulators.
The battery shall not be exposed to excessive heat
such as sunshine, fire or the lile.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
Notes on Copyrights
• Because AACS (Advanced Access Content System)
is approved as content protection system for BD
format, similar to use of CSS (Content Scramble
System) for DVD format, certain restrictions are
imposed on playback, analog signal output, etc.,
of AACS protected contents. The operation of this
product and restrictions on this product may vary
depending on your time of purchase as those
restrictions may be adopted and/or changed by
AACS after the production of this product.
• Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection systems
for BD format, which imposes certain restrictions
including playback restrictions for BD-ROM
Mark and/or BD+ protected contents. To obtain
additional information on AACS, BD-ROM Mark,
BD+, or this product, please contact an authorized
Customer Service Centre.
• Many BD-ROM/DVD discs are encoded with
copy protection. Because of this, you should only
connect your player directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted
picture from copy-protected discs.
• This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Macrovision, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
• Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/
or criminal liability.
BD561-N-BCANLLK-ENG.indd 4
2010.1.22 8:31:28 PM
Safety Information
Important Safety
Instructions
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
1
Safety Information
1. Read these instructions.
5
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by
the manufacturer.
12. Use only with the cart, stand, tripod, bracket,
or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the
cart/apparatus combination to
avoid injury from tip-over.
BD561-N-BCANLLK-ENG.indd 5
2010.1.22 8:31:28 PM
6
Contents
3
Installation
14
14
1
Safety Information
3
Cautions and Warnings
Connecting to Your TV
HDMI Connection
15
What is SIMPLINK?
16
Component Video
Connection
16
Video/Audio (Left/Right)
Connection
17
Resolution Setting
2
18
Preparation
18
Connecting to an Amplifier
via HDMI Output
8
Introduction
Connecting to an Amplifier
19
About the “ ” Symbol
Display
Connecting to an Amplifier
via Digital Audio Output
19
8
Symbols Used in this
Manual
Connecting to an Amplifier
via 2 Channel Audio Output
20
8
Supplied Accesorries
20
Wired network connection
9
Playable Discs
21
Wired Network Setup
10
File compatibility
23
11
Regional Code
23
11
AVCHD (Advanced Video
Codec High Definition)
24
11
Certain System
Requirements
24
Adjust the Setup Settings
25
[DISPLAY] Menu
Compatibility Notes
8
11
Connecting to your Home Network
USB device connection
Playback content in the
USB device
Settings
26
[LANGUAGE] Menu
12
Remote control
27
[AUDIO] Menu
13
Front panel
28
[LOCK] Menu
13
Rear panel
29
[NETWORK] Menu
30
[OTHERS] Menu
BD561-N-BCANLLK-ENG.indd 6
2010.1.22 8:31:28 PM
7
4
7
Operation
Appendix
31
General Playback
61
33
Advanced Playback
Controlling a TV with the Supplied
Remote Control
37
On-Screen display
62
Network Software Update
40
Enjoying BD-LIVE
64
Area Code List
Playing a movie file and VR disc
65
Language code List
Viewing a photo
66
Trademarks and Licenses
68
Audio Output Specifications
70
Video Output Resolution
41
42
44
45
Listening to music during a
slide show
2
71
Specifications
45
Audio CD Recording
72
47
Viewing information from
Gracenote Media Database
Important Information Relating to
Network Services
73
Open source software notice
48
Listening to music
Using the NetCast™ Entertainment
Access
48
Playing YouTube™ videos
52
Viewing Picasa™ Web
Albums
55
Using the AccuWeather
1
3
4
5
5
Maintenance
57
Notes on Discs
57
Handling the Unit
6
6
7
Troubleshooting
58
General
59
Picture
59
Sound
60
Network
BD561-N-BCANLLK-ENG.indd 7
2010.1.22 8:31:28 PM
8
Preparation
2
Preparation
2
Introduction
Preparation
MUSIC
Music files contained in
the USB/Disc
PHOTO
Photo files
About the “ ” Symbol Display
“ ” may appear on your TV display during
operation and indicates that the function
explained in this owner’s manual is not
available on that specific media.
Symbols Used in this Manual
Supplied Accesorries
Video cable (1)
Audio cables (1)
Remote control (1)
Batteries (2)
NOTE
Indicates special notes and operating features.
CAUTION
Indicates cautions for preventing possible
damages from abuse.
A section whose title has one of the following
symbols are applicable only to the disc
represented by the symbol.
BD
BD-ROM disc
DVD
DVD-Video, DVD±R/RW in
Video mode or VR mode
and finalized
AVCHD
DVD±R/RW in AVCHD
format
ACD
Audio CDs
MOVIE
BD561-N-BCANLLK-ENG.indd 8
Movie files contained in
the USB/Disc
2010.1.22 8:31:29 PM
Preparation
Playable Discs
Blu-ray Disc
- Discs such as movies that can
be purchased or rented.
- BD-R/RE discs that contain
Movie, Music or Photo files.
DVD-VIDEO (8 cm / 12 cm disc)
Discs such as movies that can be
purchased or rented.
DVD-RW (8 cm / 12 cm disc)
- VR mode, Video mode and
finalized only
- Finalized AVCHD format
- DVD-RW discs that contain
Movie, Music or Photo files.
DVD+RW (8 cm / 12 cm disc)
- Video mode and finalized only
- Finalized AVCHD format
- DVD+RW discs that contain
Movie, Music or Photo files.
Audio CD (8 cm / 12 cm disc)
CD-R/RW (8 cm / 12 cm disc)
CD-R/RW discs that contain audio
titles, Movie, Music or Photo files.
NOTE
• Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD±R/RW)
disc itself, some CD-R/RW (or DVD±R/RW) discs
cannot be played on the unit.
• Depending on the recording software & the
finalization, some recorded discs (CD-R/RW,
DVD±R/RW or BD-R/RE) may not be playable.
• BD-R/RE, DVD±R/RW and CD-R/RW discs
recorded using a personal computer or a DVD or
CD Recorder may not play if the disc is damaged
or dirty, or if there is dirt or condensation on the
player’s lens.
• If you record a disc using a personal computer,
even if it is recorded in a compatible format,
there are cases in which it may not play because
of the settings of the application software used
to create the disc. (Check with the software
publisher for more detailed information.)
2
Preparation
DVD±R (8 cm / 12 cm disc)
- Video mode and finalized only
- Supports the dual layer disc
also
- Finalized AVCHD format
- DVD±R discs that contain
Movie, Music or Photo files.
9
• This player requires discs and recordings to meet
certain technical standards in order to achieve
optimal playback quality.
• Pre-recorded DVDs are automatically set to
these standards. There are many different
types of recordable disc formats (including
CD-R containing MP3 or WMA files) and these
require certain pre-existing conditions to ensure
compatible playback.
• Hybrid disc have both BD-ROM and DVD (or CD)
layers on one side. On such discs, BD-ROM layer
will be only played back in this player.
• Customers should note that permission is
required in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
should always be sought from the copyright
owner.
• You have to set the disc format option to
[Mastered] in order to make the discs compatible
with the LG players when formatting rewritable
discs. When setting the option to Live System,
you cannot use it on LG player. (Mastered/Live
File System : Disc format system for windows
Vista)
BD561-N-BCANLLK-ENG.indd 9
2010.1.22 8:31:30 PM
10
Preparation
File compatibility
NOTE
Overall
• HD movie files contained on the CD or USB
1.0/1.1 may not played properly. BD, DVD or USB
2.0 are recommended to play back HD movie
files.
Available File extensions: “.jpg”, “.jpeg”, “.png”, “
.avi”, “.divx”, “.mpg”, “.mpeg”, “.mkv”, “.mp4”, “.mp3”,
“.wma”, “.wav”
2
•
Some wav files are not supported on this
player.
•
The file name is limited to 180 characters.
• This player support H.264/MPEG-4 AVC profile
Main, High at Level 4.1. For a file with higher
level, the warning message will appear on the
screen.
Preparation
• This player does not support the file that are
recorded with GMC*1 or Qpel*2. Those are video
encoding techniques in MPEG4 standard, like
DivX or XVID have.
Depending on the size and number of the
files, it may take several minutes to read the
contents on the media.
Maximum Files/Folder: Less than 2000 (total
number of files and folders)
CD-R/RW, DVD±R/RW, BD-R/RE Format:
ISO 9660+JOLIET, UDF and UDF Bridge format
•
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
MUSIC
MOVIE
Available resolution size: 1920 x 1080 (W x H)
pixels
Playable subtitle: SubRip (.srt / .txt), SAMI
(.smi), SubStation Alpha (.ssa/.txt), MicroDVD
(.sub/.txt), VobSub (.sub), SubViewer 1.0 (.sub),
SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD
Subtitle System (.txt)
Playable Codec format: “DIVX3.xx”, “DIVX4.
xx”, “DIVX5.xx”, “XVID”, “DIVX6.xx” (Standard
playback only), H.264/MPEG-4 AVC, MPEG1 SS,
MPEG2 PS, MPEG2 TS
Playable Audio format: “Dolby Digital”, “DTS”,
“MP3”, “WMA”, “AAC”, “AC3”
•
Not all the WMA and AAC Audio format are
compatible with this unit.
Sampling frequency: within 32-48 kHz
(WMA), within 16-48 kHz (MP3)
Bit rate: within 20-320Kbps (WMA), within
32-320Kbps (MP3)
BD561-N-BCANLLK-ENG.indd 10
Sampling frequency: within 8 - 48 kHz
(WMA), within 11 - 48 kHz (MP3)
Bit rate: within 8 - 320 kbps (WMA, MP3)
NOTE
• This unit cannot support the ID3 Tag embedded
MP3 file.
• The total playback time indicated on the screen
may not be correct for VBR files.
PHOTO
Recommended size:
Less than 4,000 x 3,000 x 24 bit/pixel
Less than 3,000 x 3,000 x 32 bit/pixel
•
Progressive and lossless compression photo
image files are not supported.
2010.1.22 8:31:30 PM
Preparation
Regional Code
This unit has a regional code printed on the
rear of the unit. This unit can play only BD-ROM
or DVD discs labeled same as the rear of the
unit or “ALL”.
AVCHD (Advanced Video Codec
High Definition)
This player can playback AVCHD format
discs. These discs are normally recorded and
used in camcorders.
•
The AVCHD format is a high definition
digital video camera format.
•
The MPEG-4 AVC/H.264 format is capable
of compressing images at higher efficiency
than that of the conventional image
compressing format.
•
Some AVCHD discs use the “x.v.Color”
format.
•
This player can playback AVCHD discs using
“x.v.Color” format.
•
Some AVCHD format discs may not play
depending on the recording condition.
•
AVCHD format discs need to be finalized.
•
“x.v.Color” offers a wider colour range than
normal DVD camcorder discs.
Certain System Requirements
For Dolby® Digital Plus, Dolby TrueHD and DTSHD multi-channel audio playback:
•
An amplifier/receiver with a built-in (Dolby
Digital, Dolby Digital Plus, Dolby TrueHD,
DTS or DTS-HD) decoder.
•
Main, centre, surround speakers and
subwoofer as necessary for chosen format.
2
Compatibility Notes
•
Because BD-ROM is a new format,
certain disc, digital connection and other
compatibility issues are possible. If you
experience compatibility problems, please
contact an authorized Customer Service
Centre.
•
Viewing high-definition content and upconverting standard DVD content may
require a HDMI-capable input or HDCPcapable DVI input on your display device.
•
Some BD-ROM and DVD discs may restrict
the use of some operation commands or
features.
•
Dolby TrueHD, Dolby Digital Plus and DTSHD are supported with maximum 7.1
channels if you use HDMI connection for
the audio output of the unit.
•
You can use a USB device that is used
to store some disc related information,
including downloaded on-line content. The
disc you are using will control how long this
information is retained.
Preparation
•
11
For high definition video playback:
•
High definition display that has
COMPONENT or HDMI input jacks.
•
BD-ROM disc with high definition content.
•
HDMI or HDCP capable DVI input on your
display device is required for some content
(as specified by disc authors).
•
For up-conversion of standard definition
DVD, a HDMI or HDCP capable DVI input
on your display device is required for copy
protected content.
BD561-N-BCANLLK-ENG.indd 11
2010.1.22 8:31:31 PM
12
Preparation
Remote control
• • • • • • a• • • • • •
1 (POWER): Switches the
player ON or OFF.
Z (OPEN/CLOSE): Opens and
2
closes the disc tray.
Preparation
0-9 numerical buttons:
Selects numbered options in
a menu or inputs letters in the
keypad menu.
CLEAR: Removes a mark on
the search menu or a number
when setting the password.
REPEAT: Repeats a desired
section or sequence.
• • • • • • b• • • • • •
m/M (SCAN): Searches
backward or forward.
./> (SKIP): Goes to the
next or previous chapter / track
/ file.
x (STOP): Stops playback.
N (PLAY): Starts playback.
Battery Installation
X (PAUSE): Pauses playback.
• • • • • • c• • • • • •
ENTER ( ): Acknowledges
menu selection.
RETURN (O): Exits the menu
or resumes playback. The
resume play function may not
work depending on the BDROM disc.
TITLE/POPUP: Displays the
DVD title menu or BD-ROM’s
pop-up menu, if available.
DISC MENU: Accesses the
menu on a disc.
• • • • • • d• • • • • •
Coloured (R, G, Y, B) buttons:
Use to navigate BD-ROM
menus. They are also used for
[MOVIE], [PHOTO], [MUSIC] and
[NetCast] menu.
MARKER: Marks any point
during playback.
SEARCH: Displays or exits the
search menu.
ZOOM: Displays or exits the
[Zoom] menu.
TV Control Buttons: See page
61.
HOME ( ): Displays or exits
the [Home Menu].
Remove the battery cover
on the rear of the Remote
Control, and insert two R03
(size AAA) batteries with
and matched correctly.
MUSIC ID: When connected
to the network, can provide
information about the current
song during movie playback.
INFO/DISPLAY ( ): Displays or
exits On-Screen Display.
Direction buttons: Selects an
option in the menu.
BD561-N-BCANLLK-ENG.indd 12
2010.1.22 8:31:31 PM
Preparation
13
Front panel
2
f N/X (PLAY / PAUSE)
b Z (OPEN/CLOSE)
g x (STOP)
c 1 (POWER) Button
h ./> (SKIP)
d Display Window
i USB Port
Preparation
a Disc Tray
e Remote Sensor
Rear panel
a AC power cord
e LAN port
b DIGITAL AUDIO OUT (COAXIAL)
f HDMI OUT (Type A, Version 1.3)
c VIDEO OUT
g COMPONENT VIDEO OUT (Y PB PR)
d 2CH AUDIO OUT (Left/Right)
BD561-N-BCANLLK-ENG.indd 13
2010.1.22 8:31:32 PM
14
Installation
3
Installation
Connecting to Your TV
3
Installation
Make one of the following connections,
depending on the capabilities of your existing
equipment.
•
HDMI connection (page 14-15)
•
Component Video connection (page 16)
•
Video/Audio (Left/Right) Connection (page
16)
HDMI Connection
If you have a HDMI TV or monitor, you can
connect it to this player using a HDMI cable
(Type A, Version 1.3). Connect the HDMI jack
on the player to the HDMI jack on a HDMI
compatible TV or monitor.
HDMI Connection
BD Player
NOTE
• Depending on your TV and other equipment
you wish to connect, there are various ways you
could connect the player. Use only one of the
connections described in this manual.
• Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make
the best connections.
• Do not connect the player’s AUDIO OUT jack to
the phono in jack (record player) of your audio
system.
HDMI
Cable
TV
• Do not connect your player via your VCR. The
image could be distorted by the copy protection
system.
Set the TV’s source to HDMI (refer to TV’s
Owner’s manual).
BD561-N-BCANLLK-ENG.indd 14
2010.1.22 8:31:32 PM
Installation
NOTE
• If a connected HDMI device does not accept
the audio output of the player, the HDMI device
’s audio sound may be distorted or may not
output.
• When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to “Resolution Setting” on page 17.)
• Select the type of video output from the HDMI
OUT jack using [HDMI Color Setting] option on
the [Setup] menu (see page 26).
• When the HDMI connection with HDCP is not
verified, TV screen is changed to black screen.
In this case, check the HDMI connection, or
disconnect the HDMI cable.
• If there are noises or lines on the screen, please
check the HDMI cable (length is generally
limited to 4.5m).
What is SIMPLINK?
Some functions of this unit are controlled by
the TV’s remote control when this unit and LG
TV’s with SIMPLINK are connected through
HDMI connection.
Controllable functions by LG TV’s remote
control; Play, Pause, Scan, Skip, Stop, Power Off,
etc.
Refer to the TV owner’s manual for the details
of SIMPLINK function.
LG TV’s with SIMPLINK function has the logo as
shown above.
NOTE
3
Installation
• Changing the resolution when the connection
has already been established may result in
malfunctions. To solve the problem, turn off the
player and then turn it on again.
15
Depending on the disc type or playing status,
some SIMPLINK operation may differ from your
purpose or not work.
Additional Information for HDMI
•
When you connect a HDMI or DVI
compatible device make sure of the
following:
- Try switching off the HDMI/DVI device
and this player. Next, switch on the
HDMI/DVI device and leave it for around
30 seconds, then switch on this player.
- The connected device’s video input is set
correctly for this unit.
- The connected device is compatible with
720x480p, 1280x720p, 1920x1080i or
1920x1080p video input.
•
Not all HDCP-compatible HDMI or DVI
devices will work with this player.
- The picture will not be displayed properly
with non-HDCP device.
- This player does not playback and TV
screen is changed to black screen.
BD561-N-BCANLLK-ENG.indd 15
2010.1.22 8:31:33 PM
16
Installation
Component Video Connection
Connect the COMPONENT VIDEO OUT jacks on
the player to the corresponding input jacks on
the TV using component video cable. Connect
the left and right AUDIO OUT jacks of the
player to the audio left and right IN jacks on
the TV using the audio cables.
Component Connection
Video/Audio (Left/Right)
Connection
Connect the VIDEO OUT jack on the player to
the video in jack on the TV using a video cable.
Connect the left and right AUDIO OUT jacks of
the player to the audio left and right IN jacks
on the TV using the audio cables.
Video/Audio Connection
BD Player
BD Player
3
Installation
Component
video cable
Audio
cable
Video cable
Audio
cable
TV
TV
NOTE
When you use COMPONENT VIDEO OUT
connection, you can change the resolution for the
output. (Refer to “Resolution setting” on page 17.)
BD561-N-BCANLLK-ENG.indd 16
2010.1.22 8:31:33 PM
Installation
Resolution Setting
The player provides several output resolutions
for HDMI OUT and COMPONENT VIDEO OUT
jacks. You can change the resolution using
[Setup] menu.
1. Press HOME (
).
2. Use I/i to select the [Setup] and press
ENTER ( ). The [Setup] menu appears.
17
NOTE
• If your TV does not accept the resolution you
have set on the player, you can set resolution to
480p as follows:
1. Press Z to open the disc tray.
2 Press x (STOP) for more than 5 seconds.
• Since several factors affect the resolution of
video output, see “Video Output Resolution” on
page 70.
3
Installation
3. Use U/u to select [DISPLAY] option then
press i to move to the second level.
4. Use U/u to select the [Resolution] option
then press ENTER ( ) to move to the third
level.
5. Use U/u to select the desired resolution
then press ENTER ( ) to confirm your
selection.
BD561-N-BCANLLK-ENG.indd 17
2010.1.22 8:31:34 PM
18
Installation
Connecting to an
Amplifier
Make one of the following connections,
depending on the capabilities of your existing
equipment.
3
•
HDMI Audio connection (page 18)
•
Digital Audio connection (page 19)
•
2CH Analog Audio connection (page 19)
Connecting to an Amplifier via
HDMI Output
Connect the player’s HDMI OUT jack to the
corresponding in jack on your amplifier using
a HDMI cable. You will need to activate the
player’s digital output. (See “[AUDIO] Menu” on
pages 27-28.)
HDMI Connection
BD Player
Installation
Since many factors affect the type of audio
output, see “Audio Output Specifications” for
details (pages 68-69).
About Digital Multi-channel sound
A digital multi-channel connection provides
the best sound quality. For this, you need
a multi-channel Audio/Video Receiver that
supports one or more of the audio formats
supported by your player. Check the receiver
manual and the logos on the front of the
receiver. (PCM Stereo, PCM Multi-Ch, Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS
and/or DTS-HD)
HDMI cable
Receiver/Amplifier
HDMI cable
TV
Connect the amplifier’s HDMI output jack to
HDMI input jack on your TV using a HDMI cable
if your amplifier has HDMI output jack.
BD561-N-BCANLLK-ENG.indd 18
2010.1.22 8:31:34 PM
Installation
Connecting to an Amplifier via
Digital Audio Output
Connecting to an Amplifier via
2 Channel Audio Output
Connect the player’s DIGITAL AUDIO OUT jack
to the corresponding in jack (COAXIAL) on your
amplifier. Use an optional digital audio cable.
You will need to activate the player’s digital
output. (See “[AUDIO] Menu” on pages 27-28.)
Connect the Left and Right 2CH AUDIO OUT
jacks on the player to the audio left and right
in jacks on your amplifier, receiver, or stereo
system using audio cables.
19
2CH Analog Audio Connection
Digital Audio Connection
BD Player
BD Player
3
Installation
Coaxial
cable
Audio cable
Receiver/Amplifier
Receiver/Amplifier
BD561-N-BCANLLK-ENG.indd 19
2010.1.22 8:31:34 PM
20
Installation
Connecting to your
Home Network
Wired Network Connection
Router/Modem
This player can be connected to a local area
network (LAN) via the LAN port on the rear
panel.
By connecting the unit to a broadband home
network, you have access to services such as
software updates, BD-LIVE interactivity and
on-line services.
Broadband
service
PC
3
Installation
Wired network connection
Connect the player’s LAN port to the
corresponding port on your Modem or Router
using a commercially available LAN or Ethernet
cable (CAT5 or better with RJ45 connector).
NOTE
PC
LAN cable
• When plugging or unplugging the LAN cable,
hold the plug portion of the cable. When
unplugging, do not pull on the LAN cable but
unplug while pressing down on the lock.
• Do not connect a modular phone cable to the
LAN port.
• Since there are various connection
configurations, please follow the specifications
of your telecommunication carrier or internet
service provider.
BD Player
BD561-N-BCANLLK-ENG.indd 20
2010.1.22 8:31:35 PM
Installation
Wired Network Setup
If there is a DHCP server on the local area
network (LAN) via wired connection, this player
will automatically be allocated an IP address.
After making the physical connection, a small
number of home networks may require the
player’s network setting to be adjusted. Adjust
the [NETWORK] setting as follow.
21
NOTE
If there is no DHCP server on the network and you
want to set the IP address manually, select [Static]
then set [IP Address], [Subnet Mask], [Gateway]
and [DNS Server] using U/u/I/i and numerical
buttons. If you make a mistake while entering a
number, press CLEAR to clear the highlighted part.
Before setting the wired network, you need to
connect the broadband internet to your home
network.
4. The player will ask you to test the network
connection. Select [OK] and press ENTER
( ) to complete the network connection.
1. Select [Connection Setting] option in the
[Setup] menu then press ENTER ( ).
5. If you select [Test] and press ENTER
( ) at step 4 above, the network
connection status is displayed on the
screen.
You can also test it on the [Connection
Status] in the [Setup] menu.
3
Installation
Preparation
3. Select [OK] and press ENTER ( ) to apply
network settings.
2. Use U/u/I/i to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
BD561-N-BCANLLK-ENG.indd 21
2010.1.22 8:31:35 PM
22
Installation
Notes on Network Connection:
•
3
Many network connection problems during
set up can often be fixed by re-setting the
router or modem. After connecting the
player to the home network, quickly power
off and/or disconnect the power cable of
the home network router or cable modem.
Then power on and/or connect the power
cable again.
Depending on the internet service provider
(ISP), the number of devices that can
receive internet service may be limited by
the applicable terms of service. For details,
contact your ISP.
•
Our company is not responsible for
any malfunction of the player and/or
the internet connection feature due to
communication errors/malfunctions
associated with your broadband internet
connection, or other connected equipment.
•
The features of BD-ROM discs made
available through the Internet Connection
feature are not created or provided
by our company, and our company is
not responsible for their functionality
or continued availability. Some disc
related material available by the Internet
Connection may not be compatible with
this player. If you have questions about such
content, please contact the producer of the
disc.
Installation
•
•
Some internet contents may require a
higher bandwidth connection.
•
Even if the player is properly connected and
configured, some internet contents may
not operate properly because of internet
congestion, the quality or bandwidth of
your internet service, or problems at the
provider of the content.
•
Some internet connection operations may
not be possible due to certain restrictions
set by the Internet service provider (ISP)
supplying your broadband Internet
connection.
BD561-N-BCANLLK-ENG.indd 22
•
Any fees charged by an ISP including,
without limitation, connection charges are
your responsibility.
•
A 10 Base-T or 100 Base-TX LAN port is
required for wired connection to this player.
If your internet service does not allow for
such a connection, you will not be able to
connect the player.
•
You must use a Router to use xDSL service.
•
A DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with
your ISP, you may not be able to use the
internet connection feature contained in
this player or you may be limited to the
number of devices you can connect at the
same time. (If your ISP limits subscription
to one device, this player may not be
allowed to connect when a PC is already
connected.)
•
The use of a “Router” may not be allowed
or its usage may be limited depending on
the policies and restrictions of your ISP. For
details, contact your ISP directly.
2010.1.22 8:31:36 PM
Installation
USB device
connection
23
3. Select [Movie], [Photo] or [Music] using
I/i, and press ENTER ( ).
This player can play movie, music and photo
files contained in the USB device.
Playback content in the USB
device
4. Select the [USB] option using I/i, and
press ENTER ( ).
1. Insert a USB device to the USB port until it
fits into place.
3
Installation
USB device connection
5. Select a file using U/u/I/i, and press PLAY
or ENTER ( ) to play the file.
When you connect the USB device on the
HOME menu, the player plays a music fi
le contained in the USB storage device
automatically. If the USB storage device is
containing various types of files, a menu for
the file type selection will appear.
File loading may takes few minutes depending
on the number of content stored in the USB
storage device. Press ENTER ( ) while [Cancel]
is selected to stop loading.
2. Press HOME (
6. Withdraw the USB device carefully.
).
BD561-N-BCANLLK-ENG.indd 23
2010.1.22 8:31:36 PM
24
Installation
NOTE
• This player supports USB flash memory/external
HDD formatted in FAT16, FAT32 and NTFS when
accessing files (music, photo, movie). However,
for BD-LIVE and Audio CD recording, only FAT16
and FAT32 formats are supported. Use the USB
flash memory/external HDD formatted in either
FAT16 or FAT32 when using BD-LIVE and Audio
CD recording.
Settings
Adjust the Setup Settings
You can change the settings of the player in
the [Setup] menu.
1. Press HOME (
).
• The USB device can be used for the local storage
for enjoying BD-LIVE discs with Internet.
• This unit can support up to 4 partitions of the
USB device.
3
Installation
• Do not extract the USB device during operation
(play, etc.).
• A USB device which requires additional program
installation when you have connected it to a
computer, is not supported.
2. Use I/i to select the [Setup] and press
ENTER ( ). The [Setup] menu appears.
• USB device: USB device that supports USB1.1
and USB2.0.
• Movie, music and photo files can be played.
For details of operations on each file, refer to
relevant pages.
• Regular back up is recommended to prevent
data loss.
• If you use a USB extension cable, USB HUB or
USB Multi-reader, the USB device may not be
recognized.
• Some USB device may not work with this unit.
3. Use U/u to select the first setup option, and
press i to move to the second level.
• Digital camera and mobile phone are not
supported.
• USB Port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
BD561-N-BCANLLK-ENG.indd 24
2010.1.22 8:31:36 PM
Installation
4. Use U/u to select a second setup option,
and press ENTER ( ) to move to the third
level.
25
NOTE
You cannot select [4:3 Letter Box] and [4:3 Pan
Scan] option when the resolution is set to higher
than 720p.
Resolution
Sets the output resolution of the Component
and HDMI video signal. Refer to page 17 and
70 for details about the resolution setting.
5. Use U/u to select a desired setting, and
press ENTER ( ) to confirm your selection.
TV Aspect Ratio
Select a TV aspect ratio option according to
your TV type.
[4:3 Letter Box]
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking
bars above and below the picture.
[4:3 Pan Scan]
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV
screen. Both sides of the picture are cut off.
[16:9 Original]
Select when a 16:9 wide TV is connected.
The 4:3 picture is displayed with an original
4:3 aspect ratio, with black bars appearing
at the left and right sides.
3
Installation
[DISPLAY] Menu
[Auto]
If the HDMI OUT jack is connected to
TVs providing display information (EDID),
automatically selects the resolution
best suited to the connected TV. If the
COMPONENT VIDEO OUT is only connected,
this changes the resolution to 1080i as
default resolution.
[1080p]
Outputs 1080 lines of progressive video.
[1080i]
Outputs 1080 lines of interlaced video.
[720p]
Outputs 720 lines of progressive video.
[480p]
Outputs 480 lines of progressive video.
[480i]
Outputs 480 lines of interlaced video.
[16:9 Full]
Select when a 16:9 wide TV is connected.
The 4:3 picture is adjusted horizontally (in a
linear proportion) to fill the entire screen.
BD561-N-BCANLLK-ENG.indd 25
2010.1.22 8:31:37 PM
26
Installation
1080p Display Mode
When the resolution is set to 1080p, select
[24Hz] for smooth presentation of film material
(1080p/24 Hz) with a HDMI-equipped display
compatible with 1080p/24 Hz input.
[LANGUAGE] Menu
Display Menu
Select a language for the [Setup] menu and
on-screen display.
NOTE
• When you select [24 Hz], you may experience
some picture disturbance when the video
switches video and film material. In this case,
select [60 Hz].
3
Installation
• Even when [1080p Display Mode] is set to
[24 Hz], if your TV is not compatible with
1080p/24 Hz, the actual frame frequency of the
video output will be 60 Hz to match the video
source format.
HDMI Color Setting
Select the type of output from the HDMI
OUT jack. For this setting, please refer to the
manuals of your display device.
[YCbCr]
Select when connecting to a HDMI display
device.
[RGB]
Select when connecting to a DVI display
device.
BD561-N-BCANLLK-ENG.indd 26
Disc Menu/Disc Audio/Disc Subtitle
Select the language you prefer for the audio
track (disc audio), subtitles, and the disc menu.
[Original]
Refers to the original language in which the
disc was recorded.
[Other]
Press ENTER ( ) to select another language.
Use number buttons then press ENTER ( )
to enter the corresponding 4-digit number
according to the language code list on
page 65.
[Off ] (Disc Subtitle only)
Turn off Subtitle.
NOTE
Depending on the disc, your language setting may
not work.
2010.1.22 8:31:37 PM
Installation
[AUDIO] Menu
Each disc has a variety of audio output options.
Set the player’s Audio options according to the
type of audio system you use.
NOTE
Since many factors affect the type of audio output,
see “Audio Output Specifications” on page 68-69 for
details.
HDMI / Digital Output
[PCM Stereo]
Select if you connect this unit’s HDMI OUT
or DIGITAL AUDIO OUT jack to a device with
two-channel digital stereo decoder.
[PCM Multi-Ch] (HDMI only)
Select if you connect this unit’s HDMI OUT
jack to a device with multi-channel digital
decoder.
[DTS Re-Encode]
Select if you connect this unit’s HDMI OUT
or DIGITAL AUDIO OUT jack to a device with
DTS decoder.
[Primary Pass-Thru]
Select if you connect this unit’s DIGITAL
AUDIO OUT and HDMI OUT jack to a device
with LPCM, Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, DTS and DTS-HD decoder.
BD561-N-BCANLLK-ENG.indd 27
NOTE
• When [HDMI] option is set to [PCM Multi-Ch],
the audio may output as PCM Stereo if the PCM
Multi-Ch information is not detected from HDMI
device with EDID.
• If the [HDMI] or [Digital Output] option is set to
[DTS re-encode], the DTS Re-encode audio is
output for BD-ROM discs with secondary audio
and the original audio is output for the other
discs (like [Primary Pass-Thru]).
Sampling Freq.
(Digital Audio Output)
3
[192 kHz]
Select this if your A/V Receiver or Amplifier
is capable of handling 192 kHz signals.
[96 kHz]
Select this if your A/V Receiver or Amplifier
is not capable of handling 192 kHz signals.
When this choice is made, this unit
automatically converts any 192 kHz signals
to 96 kHz so your system can decode them.
Installation
Select the output sound format when a device
equipped with a HDMI or Digital Audio input
jack is connected to the HDMI OUT or DIGITAL
AUDIO OUT jack on this player.
27
[48 kHz]
Select this if your A/V Receiver or Amplifier
is not capable of handling 192 kHz and
96 kHz signal. When this choice is made,
this unit automatically converts any 192 kHz
and 96 kHz signals to 48 kHz so your system
can decode them.
Check the documentation for your A/V
Receiver or Amplifier to verify its capabilities.
2010.1.22 8:31:37 PM
28
Installation
DRC (Dynamic Range Control)
If you forget your password
When a title encoded in Dolby Digital or Dolby
Digital Plus is playing back, you may wish to
compress the dynamic range of the audio
output (the difference between the loudest
sounds and the quietest ones). This allows you
to listen to a movie at a lower volume without
losing clarity of sound. Set [DRC] to [On] for
this effect.
If you forget your password, you can clear it
using the following steps:
1. Remove any disc that might be in the
player.
2. Select [Password] option in the [Setup]
menu.
3. Use Number buttons to enter “210499”. The
password is cleared.
NOTE
3
The DRC setting can be changed only when a
disc is not inserted or the unit is in complete stop
mode.
Installation
[LOCK] Menu
The [LOCK] settings affect only BD and DVD
playback.
To access the any features in [LOCK] settings,
you must enter the 4-digit security code you
have created.
If you have not entered a password yet, you are
prompted to do so. Enter a 4-digit password
twice, and press ENTER ( ) to create a new
password.
NOTE
If you make a mistake before pressing ENTER ( ),
press CLEAR. Then input the correct password.
DVD Rating
Blocks playback of rated DVD based on their
content. (Not all discs are rated.)
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select [Unlock], parental control is not
active and the disc plays in full.
BD Rating
Password
You can create, or change the password.
[None]
Enter a 4-digit password twice, and press
ENTER ( ) to create a new password.
[Change]
Enter the current password and press ENTER
( ). Enter a 4-digit password twice, and
press ENTER ( ) to create a new password.
BD561-N-BCANLLK-ENG.indd 28
Sets an age limit for BD-ROM playback. Use
number buttons to input an age limit for BDROM viewing.
[255]
All BD-ROM can be played.
[0-254]
Prohibits play of BD-ROM with
corresponding ratings recorded on them.
2010.1.22 8:31:38 PM
Installation
NOTE
The [BD rating] will be applied only for the BD disc
that containing the Advanced Rating Control.
29
[NETWORK] Menu
The [NETWORK] settings are needed to use the
software update, BD Live and on-line features.
Area Code
Connection Setting
Enter the code of the area whose standards
were used to rate the DVD video disc, based
on the list on page 64.
If your home network environment is ready to
connect to the player, the player needs to be
set up for network communication.
(See “Connecting to your Home Network” on
pages 20-22.)
Connection Status
3
Installation
If you want to check the network status on
this player, select the [Connection Status]
options and press ENTER ( ) to check whether
a connection to the network and the internet
have been established.
BD-LIVE connection
You can restrict Internet access when BD-LIVE
functions are used.
[Permitted]
Internet access is permitted for all BD-LIVE
contents.
[Partially permitted]
Internet access is permitted only for BDLIVE contents which have content owner
certificates. Internet access and AACS
Online functions are prohibited for all BDLIVE contents without a certificate.
[Prohibited]
Internet access is prohibited for all BD-LIVE
contents.
BD561-N-BCANLLK-ENG.indd 29
2010.1.22 8:31:38 PM
30
Installation
[OTHERS] Menu
DivX VOD
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, Inc. This is an official
DivX Certified device that plays DivX video.
Visit www.divx.com for more information and
software tools to convert your files into DivX
video.
3
Installation
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to
play DivX Video-on-Demand (VOD) content.
To generate the registration code, locate the
DivX VOD section in the device setup menu.
Go to vod.divx.com with this code to complete
the registration process and learn more about
DivX VOD.
[Register]
Displays the registration code of your player.
[Deregister]
Deactivate your player and display the
deactivation code.
Auto Power Off
The screen saver appears when you leave
the player in Stop mode for about five
minutes. If you set this option to [On], the unit
automatically turns itself off after the Screen
Saver is displayed for 25 minutes.
Set this option to [Off ] to leave the screen
saver until the unit is operated by the user.
Initialize
Factory Set
You can reset the player to its original
factory settings.
BD Storage Clear
Initializes the BD contents from the
connected USB storage.
NOTE
If you reset the player to its original factory settings
using [Factory Set] option, you have to set the
network settings again.
Software
NOTE
All the downloaded videos from DivX VOD with
this player’s registration code can only be played
back on this unit.
Information
Displays the current software version.
Update
You can update the software by connecting
the unit directly to the software update
server (see page 62-63).
Disclaimer Notice
Press ENTER ( ) to view the notice of Network
Service Disclaimer on page 72.
BD561-N-BCANLLK-ENG.indd 30
2010.1.22 8:31:38 PM
Operation
31
4
Operation
General Playback
5. Select the [Disc] option using I/i, and
press ENTER ( ).
Playing Discs
1. Press Z (OPEN/CLOSE), and place a disc on
the disc tray.
Insert a disc
6. Select a file using U/u/I/i, and press B
(PLAY) or ENTER ( ) to play the file.
4
Operation
This step is needed only when a disc and a
USB device are connected simultaneously
in this unit.
NOTE
2. Press Z (OPEN/CLOSE) to close the disc
tray.
• Playback functions described in this manual are
not always available in every files and media.
Some functions can be restricted depending on
many factors.
For the most Audio CD, BD-ROM and
DVD-ROM discs, playback starts
automatically.
• Depending on the BD-ROM titles, a USB device
connection may be needed for the proper
playback.
3. Press HOME (
).
4. Select [Movie], [Photo] or [Music] using
I/i, and press ENTER ( ).
BD561-N-BCANLLK-ENG.indd 31
2010.1.22 8:31:39 PM
32
Operation
To stop playback
Press x (STOP) during playback.
Using the disc menu
BD
DVD
AVCHD
To pause playback
To display the disc menu
Press X (PAUSE) during playback.
Press B (PLAY) to resume playback.
The menu screen may be displayed first after
loading a disc which contains a menu. If you
want to display the disc menu during playback,
press DISC MENU.
To play frame-by-frame
Press X (PAUSE) while movie playback.
Press X (PAUSE) repeatedly to play Frame-byFrame playback.
Use U/u/I/i buttons to navigate through
menu items.
To display the Pop-up menu
To scan forward or backward
Press m or M to play fast forward or fast
reverse during playback.
You can change the various playback speeds
by pressing m or M repeatedly.
4
Some BD-ROM discs contain a Pop-up menu
that appears during playback.
Press TITLE/POPUP during playback, and use
U/u/I/i buttons to navigate through menu
items.
Operation
To slow down the playing speed
While the playback is paused, press M
repeatedly to play various speeds of slow
motion.
To skip to the next/previous
chapter/track/file
During playback, press . or > to go to
the next chapter/track/file or to return to the
beginning of the current chapter/track/file.
Press . twice briefly to step back to the
previous chapter/track/file.
BD561-N-BCANLLK-ENG.indd 32
2010.1.22 8:31:40 PM
Operation
Resume playback
BD
MUSIC
DVD
AVCHD MOVIE
ACD
The unit records the point where you pressed
the x (STOP) depending on the disc.
If “Xx (Resume Stop)” appears on the screen
briefly, press B (PLAY) to resume playback
(from the scene point).
If you press x (STOP) twice or unload the disc,
“x (Complete Stop)” appears on the screen.
The unit will clear the stopped point.
NOTE
• The resume point may be cleared when a
button is pressed (for example; 1 (POWER),
Z (OPEN/CLOSE), etc).
• On BD-Video discs with BD-J, the resume
playback function does not work.
Advanced Playback
Repeat Playback
BD
DVD
AVCHD
ACD
MUSIC
During playback, press REPEAT repeatedly to
select a desired repeat mode.
BDs/DVDs
A- – Selected portion will be repeated
continually.
Chapter – The current chapter will be
played back repeatedly.
Title – The current title will be played
back repeatedly.
To return to normal playback, press REPEAT
repeatedly to select [Off ].
Audio CDs/Music files
Track – The current track or file will be
played back repeatedly.
All – All the tracks or files will be played
back repeatedly.
– The tracks or files will be played back
in random order.
All – All the tracks or files will be
played back repeatedly in random order.
A-B – Selected portion will be repeated
continually. (Audio CD only)
4
Operation
• If you press x (STOP) once during BD-ROM
interactive title playback, the unit will be in
Complete Stop mode .
33
To return to normal playback, press CLEAR.
BD561-N-BCANLLK-ENG.indd 33
2010.1.22 8:31:40 PM
34
Operation
Enlarge the playback image
NOTE
BD
• If you press > once during Repeat Chapter/
Track playback, the repeat playback cancels.
DVD
AVCHD MOVIE PHOTO
1. During playback or pause mode, press
ZOOM to display the [Zoom] menu.
• This function may not work on some disc or title.
Repeating a specific portion
BD
DVD
AVCHD
ACD
This player can repeat a portion you have
selected.
1. During playback, press REPEAT to select [A-]
at the beginning of the portion you wish to
repeat.
4
2. Press ENTER ( ) at the end of the portion.
Your selected portion will be repeated
continually.
Operation
3. To return to normal playback, press REPEAT
repeatedly to select [Off ].
NOTE
• You cannot select a portion less than 3 seconds.
• This function may not work on some disc or title.
2. Use red (R) or green (G) colored button to
zoom out or in the picture.
You can move through the zoomed picture
using U/u/I/i buttons.
3. To return to the normal picture size, press
yellow (Y) colored button.
4. Press RETURN (O) to exit the [Zoom]
menu.
Marker Search
BD
DVD
AVCHD MOVIE
You can start playback from up to nine
memorized points.
To enter a marker
1. During playback, press MARKER at the
desired point. The Marker icon appears on
the TV screen briefly.
2. Repeat step 1 to add up to nine markers.
To recall a marked scene
1. Press SEARCH and the search menu appears
on the screen.
2. Press a number button to select a marker
number that you want to recall. Playback
starts from the marked scene.
BD561-N-BCANLLK-ENG.indd 34
2010.1.22 8:31:40 PM
Operation
To delete a Marker
1. Press SEARCH and the search menu appears
on the screen.
2. Press u to highlight a marker number. Use
I/i to select a marked scene that you
want to delete.
3. Press CLEAR and the marked scene is erased
from the search menu.
35
To start playback from a marked
scene
1. Press SEARCH and the search menu appears
on the screen.
2. Press u to highlight a marker number. Use
I/i to select a marked scene that you
want to playback.
3. Press ENTER ( ) to start playback from the
marked scene.
NOTE
This function may not work depending on discs,
titles.
NOTE
• This function may not work depending on discs,
titles.
• If the total length of the title is less than 10
seconds, this function is not available.
4
Operation
• All marked points are cleared if the title is in
complete stop (x) mode, the title is changed or
if you unload the disc.
Using the search menu
BD
DVD
AVCHD MOVIE
Using search menu, you can easily to find the
point where you want to start playback.
To search a point
1. During playback, press SEARCH to display
the search menu.
2. Press I/i to skip the playback 15 seconds
forward or backward. You can select a
point that you want to skip by pressing and
holding I/i button.
BD561-N-BCANLLK-ENG.indd 35
2010.1.22 8:31:41 PM
36
Operation
Changing content list view
Viewing content information
MOVIE MUSIC PHOTO
MOVIE
On the [Movie], [Music] or [Photo] menu, you
can change the content list view.
The player can display the content information.
Method 1
2. Press INFO/DISPLAY ( ) to display the
option menu.
Press red (R) coloured button repeatedly.
1. Select a file using U/u/I/i.
3. Select the [Information] option using U/u,
and press ENTER ( ).
The file information appears on the screen.
During movie playback, you can display the file
information by pressing TITLE/POPUP.
NOTE
The information displayed on the screen may
not be correct compared to the actual content
information.
4
Operation
Last Scene Memory
BD
DVD
This unit memorizes the last scene from the
last disc that is viewed. The last scene remains
in memory even if you remove the disc from
the unit or switch off the unit. If you load a disc
that has the scene memorized, the scene is
automatically recalled.
NOTE
Method 2
1. On the content list, press INFO/DISPLAY ( )
to display the option menu.
2. Use U/u to select the [View Change]
option.
3. Press ENTER ( ) to change the content list
view.
BD561-N-BCANLLK-ENG.indd 36
• Last Scene Memory function for a previous disc
is erased once a different disc is played.
• This function may not work depending on the
disc.
• On BD-Video discs with BD-J, the last scene
memory function does not work.
• This unit does not memorize settings of a disc if
you switch off the unit before commencing to
play it.
2010.1.22 8:31:41 PM
Operation
On-Screen display
You can display and adjust various information
and settings about the content.
Displaying content information
on-screen
BD
DVD
37
i Movie Information – Select this option
and press ENTER ( ) to display movie
information from Gracenote Media
Database (BD/DVD only).
2. Select an option using U/u.
3. Use I/i to adjust the selected option
value.
4. Press RETURN (O) to exit the On-Screen
display.
AVCHD MOVIE
1. During playback, press INFO/DISPLAY ( ) to
show various playback information.
NOTE
• If no button is pressed for a few seconds, the onscreen display disappears.
• A title number cannot be selected on some
discs.
d
• If BD interactive title is playing back, some
setting information is displayed on the screen
but prohibited to be changed.
e
f
g
h
i
a Title – current title number/total number
of titles
b Chapter – current chapter number/total
number of chapters
• Available items may differ depending on discs
or titles.
• To use the [Movie Information] option, the player
must be connected to the broadband internet
for accessing the Gracenote Media Database.
4
Operation
a
b
c
• If the information from the Gracenote Media
Database is either not correct or does not exist,
please contact www.gracenote.com for support.
• LG is a licensee of Gracenote technology and is
not responsible or reliable for information from
the Gracenote Media Database.
c Time – elapsed playing time/total
playback time
d Audio – selected audio language or
channel
e Subtitle – selected subtitle
f Angle – selected angle/total number of
angles
g TV Aspect Ratio – selected TV aspect
Ratio
h Picture Mode – selected picture mode
BD561-N-BCANLLK-ENG.indd 37
2010.1.22 8:31:42 PM
38
Operation
Playing from selected time
BD
DVD
NOTE
AVCHD MOVIE
1. Press INFO/DISPLAY ( ) during playback.
The time search box shows the elapsed
playing time.
2. Select the [Time] option and then input the
required start time in hours, minutes, and
seconds from left to right.
For example, to find a scene at 2 hours, 10
minutes, and 20 seconds, enter “21020”.
Press I/i to skip the playback 60 seconds
forward or backward.
3. Press ENTER ( ) to start playback from
selected time.
• Some discs allow you to change audio selections
only via the disc menu. In this case, press TITLE/
POP-UP or DISC MENU button and choose the
appropriate audio from the selections on the
disc menu.
• Immediately after you have switched sound,
there may be a temporary discrepancy between
the display and actual sound.
• On BD-ROM disc, the multi audio format (5.1CH
or 7.1CH) is displayed with [MultiCH] in the onscreen display.
Selecting a subtitle language
BD
NOTE
4
This function may not work on some disc or titles.
DVD
AVCHD MOVIE
1. During playback, press INFO/DISPLAY ( ) to
display the On-Screen display.
Operation
2. Use U/u to select the [Subtitle] option.
3. Use I/i to select desired subtitle language.
Hearing different audio
BD
DVD
AVCHD MOVIE
1. During playback, press INFO/DISPLAY ( ) to
display the On-Screen display.
2. Use U/u to select the [Audio] option.
3. Use I/i to select desired audio language,
audio track or audio channel.
BD561-N-BCANLLK-ENG.indd 38
4. Press RETURN (O) to exit the On-Screen
display.
NOTE
Some discs allow you to change subtitle selections
only via the disc menu. If this is the case, press
TITLE/POPUP or DISC MENU button and choose
the appropriate subtitle from the selections on the
disc menu.
2010.1.22 8:31:42 PM
Operation
Watching from a different
angle BD DVD
Changing the Picture Mode
If the disc contains scenes recorded at different
camera angles, you can change to a different
camera angle during playback.
You can change the [Picture mode] option
during playback.
1. During playback, press INFO/DISPLAY ( ) to
display the On-Screen display.
BD
DVD
AVCHD MOVIE
1. During playback, press INFO/DISPLAY ( ) to
display the On-Screen display.
2. Use U/u to select the [Angle] option.
2. Use U/u to select the [Picture Mode]
option.
3. Use I/i to select desired angle.
3. Use I/i to select desired option.
4. Press RETURN (O) to exit the On-Screen
display.
4. Press RETURN (O) to exit the On-Screen
display.
Changing the TV Aspect Ratio
BD
DVD
AVCHD MOVIE
39
Setting the [User setting] option
1. During playback, press INFO/DISPLAY ( ) to
display the On-Screen display.
2. Use U/u to select the [Picture Mode]
option.
1. During playback, press INFO/DISPLAY ( ) to
display the On-Screen display.
3. Use I/i to select the [User setting] option,
and press ENTER ( ).
2. Use U/u to select the [TV Aspect Ratio]
option.
4
Operation
You can change the TV aspect ratio setting
during playback.
3. Use I/i to select desired option.
4. Press RETURN (O) to exit the On-Screen
display.
NOTE
Even if you change the value of the [TV Aspect
Ratio] option in On-Screen display, the [TV Aspect
Ratio] option in the [Setup] menu is not changed.
4. Use U/u/I/i to adjust the [Picture Mode]
options.
Select [Default] option then press ENTER
( ) to reset the all video adjustments.
5. Use U/u/I/i to select the [Close] option,
and press ENTER ( ) to finish setting.
BD561-N-BCANLLK-ENG.indd 39
2010.1.22 8:31:42 PM
40
Operation
Enjoying BD-LIVE
This unit allows you to enjoy functions such as
picture-in-picture, secondary audio and Virtual
packages, etc., with BD-Video supporting
BONUSVIEW (BD-ROM version 2 Profile 1
version 1.1/ Final Standard Profile). Secondary
video and audio can be played from a disc
compatible with the picture-in-picture
function. For the playback method, refer to the
instructions in the disc.
4
In addition to the BONUSVIEW function, BDVideo supporting BD-LIVE (BD-ROM version
2 Profile 2) that has a network extension
function allows you to enjoy more functions
such as downloading new movie trailers by
connecting this unit to the internet.
Operation
1. Check the network connection and settings
(pages 20-22).
2. Insert a USB storage device to the USB port
on the front panel.
A USB storage device is needed to
download bonus content.
USB device connection
3. Press HOME ( ), and set the [BD-LIVE
connection] option on the [Setup] menu
(page 29).
Depending on the disc, the BD-LIVE
function may not be operated if [BDLIVE connection] option is set to [Partially
Permitted].
4. Insert a BD-ROM with BD-LIVE.
The operations may differ depending on
the disc. Refer to the manual supplied with
the disc.
CAUTION
Do not extract the connected USB device while
content is being downloaded or a Blu-ray disc is
still in the disc tray. Doing so may damage the
connected USB device and BD-LIVE features may
not operate properly with the damaged USB
device anymore. If the connected USB device
seems damaged from such an action, you can
format the connected USB device from the PC and
reuse it with this player.
NOTE
• Some BD-LIVE contents may be restrictively
accessed in some territories by contents
provider’s own decision.
• It may take up to several minutes to load and
start enjoying BD-LIVE contents.
BD561-N-BCANLLK-ENG.indd 40
2010.1.22 8:31:43 PM
Operation
Playing a movie file
and VR disc
41
NOTE
• The file requirements are described on page 10.
• You can use various playback functions. Refer to
pages 31-39.
You can play DVD-RW discs that are recorded
in Video Recording (VR) format and movie files
contained in a disc/USB device.
1. Press HOME (
).
• Unfinalized DVD VR format discs may not be
played in this player.
• Some DVD-VR discs are made with CPRM data
by DVD RECORDER. This unit cannot support
these kinds of discs.
What is CPRM?
CPRM is a copy protection system (with
scramble system) only allowing the recording of
‘copy once’ broadcast programs. CPRM stands
for Content Protection for Recordable Media.
2. Select [Movie] using I/i, and press ENTER
( ).
Selecting a subtitle file
3. Select [Disc] or [USB] option using I/i, and
press ENTER ( ).
If a movie file name and the subtitle file
name are the same, subtitle file is played
automatically when playing the movie file.
4
MOVIE
Operation
If the subtitle file name is different with the
movie file name, you need to select the subtitle
file on the [Movie] menu before playing the
movie.
This step is needed only when a disc and a
USB device is connected simultaneously to
this unit.
1. Use U/u/I/i to select the subtitle file you
wish to play in the [Movie] menu.
2. Press ENTER ( ).
4. Select a file using U/u/I/i, and press B
(PLAY) or ENTER ( ) to play the file.
Press ENTER ( ) again to deselect the
subtitle file. Selected subtitle file will be
displayed when you play the movie file.
BD561-N-BCANLLK-ENG.indd 41
2010.1.22 8:31:43 PM
42
Operation
NOTE
Viewing a photo
If you press x (STOP) during playback, the subtitle
selection is cancelled.
You can view photo files using this player.
1. Press HOME (
).
Changing subtitle code page
MOVIE
If the subtitle is not displayed properly, you
can change the subtitle code page to view the
subtitle file properly.
1. During playback, press INFO/DISPLAY ( ) to
display the On-Screen display.
2. Use U/u to select the [Code Page] option.
3. Use I/i to select desired code option.
2. Select [Photo] using I/i, and press ENTER
( ).
3. Select the [Disc] or [USB] option using I/i,
and press ENTER ( ).
4
Operation
4. Press RETURN (O) to exit the On-Screen
display.
This step is needed only when a disc and a
USB device is connected simultaneously on
this unit.
4. Select a file using U/u/I/i, and press
ENTER ( ) to view the photo in full screen.
BD561-N-BCANLLK-ENG.indd 42
2010.1.22 8:31:44 PM
Operation
To play a slide show
Press B (PLAY) to start slide show.
a Current photo/Total number of photos
– Use I/i to view previous/next photo.
To stop a slide show
b Slide Show – Press ENTER ( ) to start or
pause slide show.
Press x (STOP) during slide show.
c Music Select – Select the background
music for the slide show (page 44).
To pause a slide show
d Music –Press ENTER ( ) to start or pause
background music.
Press X (PAUSE) during slide show.
Press B (PLAY) to re-start the slide show.
To skip to the next/previous photo
While viewing a photo in full screen, press I or
i to go to the previous or next photo.
43
e Rotate – Press ENTER ( ) to rotate the
photo clockwise.
f Zoom – Press ENTER ( ) to display the
[Zoom] menu.
g Effect – Use I/i to select a transition
effect between photos in a slide show.
h Speed – Use I/i to select a delaying
speed between photos in a slide show.
NOTE
• The file requirements are described on page 10.
Options while viewing a photo
3. Press RETURN (O) to exit the option menu.
4
Operation
• You can use various playback functions. Refer to
pages 31-39.
You can use various options while viewing a
photo in full screen.
1. While viewing a photo in full screen, press
INFO/DISPLAY ( ) to display the option
menu.
2. Select an option using U/u.
a
b
c
d
e
f
g
h
BD561-N-BCANLLK-ENG.indd 43
2010.1.22 8:31:44 PM
44
Operation
Listening to music during a
slide show
You can display photo files while listening to
music files.
1. Press HOME (
).
2. Select [Photo] using I/i, and press
ENTER ( ).
3. Select the [Disc] or [USB] option using I/i,
and press ENTER ( ).
4
7. Use U/u to select a device, and press ENTER
( ).
Devices that you can select may differ
depending on the location of the photo file
you are displaying in full screen.
8. Use U/u to select a file or a folder you wish
to play.
Select a folder and press ENTER ( ) to
display the lower directory.
Select and press ENTER ( ) to display
the upper directory.
Operation
9. Use i to select [OK], and press ENTER ( )
to complete music selection.
4. Select a file using U/u/I/i, and press
ENTER ( ) to view the photo.
5. Press INFO/DISPLAY ( ) to display the
option menu.
6. Use U/u to select [Music Select] option,
and press ENTER ( ) to display the [Music
Select] menu.
BD561-N-BCANLLK-ENG.indd 44
2010.1.22 8:31:45 PM
Operation
Listening to music
45
NOTE
• The file requirements are described on page 10.
The player can play Audio CDs and music files.
1. Press HOME (
• You can use various playback functions. Refer to
pages 31-39.
).
Audio CD Recording
You can record one desired track or all of the
tracks from an Audio CD to a USB storage
device.
2. Select [Music] using I/i, and press ENTER
( ).
3. Select the [Disc] or [USB] option using I/i,
and press ENTER ( ).
1. Insert a USB storage device to the USB port
on the front panel.
2. Press Z (OPEN/CLOSE), and place an Audio
CD on the disc tray.
Press Z (OPEN/CLOSE) to close the disc
tray. The playback starts automatically.
4. Use U/u to select [CD Recording] option,
and press ENTER to display the [CD
Recording] menu.
This step is needed only when a disc and a
USB device is connected simultaneously on
this unit.
4. Select a music file or audio track using
U/u/I/i, and press ENTER ( ) to play the
music.
4
Operation
3. Press INFO/DISPLAY to display the option
menu.
5. Use U/u to select a track you wish to copy
on the menu, and press ENTER.
Repeat this step to select tracks as many as
you want.
Select all the tracks on an Audio
CD.
Selects an encoding option from
the pop-up menu (128kbps,
192kbps, 320kbps or Lossless).
Cancels the recording and
returns to the previous screen.
BD561-N-BCANLLK-ENG.indd 45
2010.1.22 8:31:45 PM
46
Operation
6. Use U/u/I/i to select [Start], and press
ENTER.
7. Use U/u/I/i to select a destination folder
to be copied.
NOTE
• The table below shows the average recording
time from an audio track with 4 minutes of
playback time to a music file with 192kbps as an
example.
stop mode
during playback
1.4 min.
2 min.
• All times in the above table are approximate.
If you want to create a new folder, use
U/u/I/i to select [New Folder] and press
ENTER.
Enter a folder name using the virtual
keyboard, and press ENTER while [OK] is
selected.
4
8. Use U/u/I/i to select [OK], and press
ENTER to start Audio CD Recording.
• Actual ripping time for USB storage device varies
depending on the USB storage device’s ability.
• Make sure that there is minimum of 50 MB free
space when recording into the USB storage
device.
• The length of the music should be longer than
20 seconds for the proper recording.
• Do not turn off this player or extract the
connected USB storage device during Audio CD
recording.
Operation
If you want to stop the Audio CD
Recording, press ENTER ( ) while [Cancel]
is highlighted.
9. A message appears when Audio CD
Recording is completed.
Press ENTER ( ) to check the music file
created in the destination folder.
BD561-N-BCANLLK-ENG.indd 46
The making of unauthorized copies of copyprotected material, including computer programs,
files, broadcasts and sound recordings, may be
an infringement of copyrights and constitute a
criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
2010.1.22 8:31:46 PM
Operation
Viewing information from
Gracenote Media Database
The player can access to the Gracenote Media
Database and loads the music information so
that Track name, Artist Name, Genre and other
text information can be displayed on the list.
Audio CD
When you insert an Audio CD, the player starts
playback automatically and load the music title
from the Gracenote Media Database.
If there is no music information in the database,
music titles will not be displayed on the screen.
Music file
1. Select a music file using U/u/I/i.
3. Select the [Information] option using U/u,
and press ENTER ( ).
The player accesses Gracenote Media
Database for the music information.
NOTE
• The player must be connected to the broadband
internet for accessing the Gracenote Media
Database.
• If the music information is not in the Gracenote
Media Database, message appears on the
screen.
• If the information from the Gracenote Media
Database is either not correct or does not exist,
please contact www.gracenote.com for support.
• Depending on the cases, it will takes a few
minutes to load music information from the
Gracenote Media Database.
• Information may be displayed in English, if your
own language is not available on the Gracenote
Media Database.
• This function is not available for on-line content.
• LG is a licensee of Gracenote technology and is
not responsible or reliable for information from
the Gracenote Media Database.
4
Operation
2. Press INFO/DISPLAY ( ) to display the
option menu.
47
BD/DVD/Movie file
While listening to music from the movie
playback, press MUSIC ID to start loading
music information from the Gracenote Media
Database.
BD561-N-BCANLLK-ENG.indd 47
2010.1.22 8:31:46 PM
48
Operation
Using the NetCast™
Entertainment Access
Playing YouTube™ videos
You can use various content services via
Internet with the NetCast Entertainment
Access feature.
You can browse, search and watch YouTube™
videos over the internet on your TV via your LG
BD player.
1. Check the network connection and settings
(pages 20-22).
Watch YouTube™ videos on your TV
2. Press HOME (
).
3. Select the [NetCast] using I/i, and press
ENTER ( ).
4. Select an option using I/i, and press
ENTER ( ).
4
YouTube™ – See page 48-51
Operation
Picasa™ Web Albums – See page 52-54
1. On the player, select the [YouTube™] option
in the [NetCast] menu using I/i, and press
ENTER ( ).
2. Press U to select the option menu bar.
3. Use I/i to select an option and press
ENTER ( ) to search videos.
4. Use I/i to select a video and press ENTER
( ) or B (play) to play the video.
AccuWeather – See page 55-56
5. While enjoying on-line content from
NetCast, press blue (B) colored button to go
to the NetCast Home screen.
NOTE
The background image on the NetCast home
indicates the weather of your favorite city in the
AccuWeather feature.
BD561-N-BCANLLK-ENG.indd 48
Button
Operation
B or ENTER Starts playback of the video
with content detail.
INFO/
DISPLAY
Toggle between playback in
full screen and playback screen
with content detail.
X
To pause a video while it is
playing. To resume playing a
paused video, press B again.
x
Stops the video and displays
related videos list.
./>
Skip the playback forward or
backward .
2010.1.22 8:31:46 PM
Operation
49
About the YouTube™ menu
There are various options on the
YouTube™ menu. Use U/u/I/i to select an
option and press ENTER ( ) to select the
options as described below.
NOTE
• The YouTube™ menu can display 5 videos in the
videos list. Press green (G) or yellow (Y) buttons
to display previous/next 5 videos.
Most Viewed – The most viewed videos list
will be displayed. The period option appears
at the bottom of the screen.
• The videos list searched from the player may
differ with the list searched from a web browser
on PC.
Top Rated – The best rated videos list from
YouTube™ server will be displayed. The period
option appears at the bottom of the screen.
• The playback of YouTube™ videos may be
paused, stopped or buffering occurring often
depending on your broadband speed. We
recommend a minimum connection speed
of 1.5 Mbps. For the best playback condition,
a connection speed of 4.0 Mbps is required.
Sometimes your broadband speed varies based
on your ISP’s network conditions. Contact your
ISP if you have problems maintaining a fast
connection that is reliable, or if you want to
increase your connection speed. Many ISPs offer
a variety of broadband speed options.
Search – The virtual keyboard will be
displayed. See “Searching videos” on page 51
for more detail.
History – The videos list that you previously
played on this unit will be displayed.
Maximum of 25 videos can be stored.
Favorites – This option will only appear
when the unit is in sign-in status. Displays the
videos list that is arranged in the YouTube™
server with your account. Some videos may
not appear on the [Favorites] list, even if the
videos are arranged in the server.
4
Operation
Recent Videos – The most recently updated
videos list will be displayed.
• If you select the [Most Viewed] or [Top Rated]
option in the YouTube™ menu, the period
options appear at the bottom of the screen. Use
U/u/I/i to select a period option and press
ENTER ( ) to display the videos list within the
selected period.
Featured – The featured videos list will be
displayed.
Sign in (Sign Out) – Displays the virtual
keyboard to sign in or returns to the signout status. See “Sign in with your YouTube™
account” on page 51 for more details.
Local site – Choose which country’s videos
you would like to view. The countries listed on
the [Local Site] menu may be different from
those listed on the YouTube™ web site.
BD561-N-BCANLLK-ENG.indd 49
2010.1.22 8:31:47 PM
50
Operation
Using the virtual keyboard
Keypad Mode
On the virtual keyboard, there are two input
modes for the entering a character. Press
the yellow (Y) coloured button to toggle the
display between keyboard mode and keypad
mode.
This mode allows you to enter letters by
pressing the buttons on the remote control.
Press the buttons with the required letter once,
twice, three or four times until the letter is
displayed.
Keyboard Mode
UseU/u/I/i to select a letter on the screen,
and press ENTER to confirm your selection.
4
Operation
Button
Operation
CLEAR
Deletes the previous character
at the cursor position.
REPEAT
Inserts a space at the cursor
position.
m/M
Changes the character set of
the remote control (#+-=&,
123, ABC or abc)
[Cancel] – Returns to the previous screen.
[Space] – Inserts a space at the cursor
position.
[Backspace] – Deletes the previous character
at the cursor position.
[ABC / abc / #+-=&] – Changes the virtual
keyboard settings to capital letters, small
letters or symbols.
NOTE
The keypad mode is available only in the
[YouTube™] and [Picasa™ Web Albums] features.
Press CLEAR to clear all entered characters.
To enter a letter with an accent mark:
1. Select a letter using U/u/I/i on the virtual
key board.
2. Press INFO/DISPLAY ( ) to display the
extended character set.
3. Use I/i to select a character then press
ENTER.
Available languages to enter on the keyboard
mode are as follows: English, Spanish, Italian,
French, German, Dutch, Portuguese, Swedish,
Polish and Czech.
BD561-N-BCANLLK-ENG.indd 50
2010.1.22 8:31:47 PM
Operation
Searching videos
You can search for videos by entering search
words of up to 128 characters.
1. Use I/i to select [Search] option from the
menu and press ENTER ( ) to display the
virtual keyboard.
Refer to “Using the virtual keyboard” on
page 50 for using virtual keyboard.
51
2. Use U/u/I/i to select a character then
press ENTER ( ) to confirm your selection
on the virtual keyboard.
Refer to “Using the virtual keyboard” on
page 50 for using virtual keyboard.
3. When you finish entering the username
and the password, select [OK] and press
ENTER ( ) to sign in.
4. If you want to sign out, select the [Sign Out]
from the YouTube™ menu and press
ENTER ( ).
When you are entering a character,
maximum of 5 suggestion words will be
displayed.
Select a stored username on the list and press
ENTER ( ) to display the keyboard menu with
the selected username entered. You will then
only need to enter the password to sign in.
4
Operation
2. When you finish entering the search words,
select [OK] and press ENTER ( ) to display
the related video list.
This unit can automatically store up to 5
username which were previously signed-in.
The username list appears when you select the
[Sign In] option.
Sign in with your YouTube™ account
To watch videos from your [Favorites] video list
on the YouTube™ server with your account, you
need to sign in with your YouTube™ account.
1. Use I/i to select [Sign In] option from the
menu and press ENTER ( ) to display the
virtual keyboard.
BD561-N-BCANLLK-ENG.indd 51
Select the [X] symbol and press ENTER ( ) to
delete the stored username.
2010.1.22 8:31:47 PM
52
Operation
Viewing Picasa™ Web Albums
Options while viewing a photo
You can use various options during viewing a
photo in full screen.
Enjoy photo albums from friends and family on
the Picasa™ on-line service.
View Picasa™ Web Albums on your
TV
1. On the player, select the [Picasa™ Web
Albums] option in the [NetCast] menu
using I/i, and press ENTER ( ).
Featured photos are displayed on the
screen.
2. Use U/u/I/i to select a photo and press
ENTER ( ) to view the photo in full screen.
4
Operation
Button
Operation
B
Starts a slide show.
INFO/
DISPLAY
Displays the photo option
menu.
X
Pauses a slide show. To resume
slide show, press B again.
x
I/i
Stops the slide show and
return to the Picasa™ menu.
Moves to the next or previous
photo.
1. While viewing a photo in full screen, press
INFO/DISPLAY ( ) to display the option
menu.
2. Select an option using U/u.
a
b
c
d
e
f
g
a Current photo/Total number of photos
– Use I/i to view previous/next photo.
b Slide Show – Press ENTER ( ) to start or
pause slide show.
c Add to NetCast Friends List – Add the
current photo owner to my friend list.
d Rotate – Press ENTER ( ) to rotate the
photo clockwise.
e Zoom – Press ENTER ( ) to display the
[Zoom] menu.
f Effect – Use I/i to select a transition
effect between photos in a slide show.
g Speed – Use I/i to select a delay time
between photos in a slide show.
3. Press RETURN (O) to exit the option menu.
BD561-N-BCANLLK-ENG.indd 52
2010.1.22 8:31:48 PM
Operation
About the Picasa™ menu
Adding friends
There are various options on the Picasa™
menu. Use U/u/I/i to select an menu option
and press ENTER ( ) to select the options as
described below.
If you add your friends on the [NetCast Friends]
menu, you can see the photos of your friend’s
public photos directly.
Home – The featured photo list will be
displayed.
NetCast Friends – List of your friends will be
displayed.
My Photos – Displays the photos organized
in my Picasa™ Web Albums. This option is
available only when the unit is in sign-in
status.
Favorites – Displays up to 50 favorite web
albums that are arranged in the Picasa™
web server with your account. This option
is available only when the unit is in sign-in
status.
Sign in (Sign Out) – Displays the virtual
keyboard to sign in or returns to the sign-out
status (page 54)
1. Select the [NetCast Friends] on the
Picasa™ menu using U/u/I/i, and press
ENTER ( ).
2. Press ENTER ( ) to display the virtual
keyboard.
3. Enter a name using the virtual keyboard.
Refer to “Using the virtual keyboard” on
page 50 for using virtual keyboard.
4. Select [OK] using U/u/I/i, and press
ENTER ( ) to display the web album of
your friend.
4
Operation
Search – Enter a search word to find related
photos. The virtual keyboard will be displayed
(page 54).
53
NOTE
• If you want to delete your friend from the list,
press green (G) coloured button while the web
album is selected.
• If you want to add more friends, press red (R)
coloured button on the list.
• You can add more web albums of your friends
up to 50.
NOTE
Photos displayed in [My Photos] and [Favorites]
may differ from the photos from a web browser on
PC.
BD561-N-BCANLLK-ENG.indd 53
2010.1.22 8:31:48 PM
54
Operation
Searching photos
You can enter a search word to find related
photos.
1. Select the [Search] on the Picasa™ menu
using U/u/I/i, and press ENTER ( ).
2. Enter a search word using the virtual
keyboard.
Refer to “Using the virtual keyboard” on
page 50 for using virtual keyboard.
3. Select [OK] using U/u/I/i, and press
ENTER ( ) to display the search result.
NOTE
The search result from the player may differ from
the result when searched from a web browser on
PC.
3. Enter the password using the virtual
keyboard, and press ENTER ( ) while [OK] is
selected.
Your web album is displayed on the screen.
4. If you want to sign out, select the [Sign Out]
from the Picasa™ menu and press
ENTER ( ).
This unit can automatically store up to 5 user
names which were previously signed-in. The
user name list appears when you select the
[Sign In] option.
Select a stored user name on the list and press
ENTER ( ) to display the virtual keyboard with
the selected user name is entered. You will
then only need to enter the password to sign
in.
4
Operation
Signing in with your account
To display photos in your web album on the
screen, you need to sign in with your Picasa™
account.
1. Select the [Sign In] on the Picasa™ menu
using U/u/I/i, and press ENTER ( ).
Select the [X] symbol and press ENTER ( ) to
delete the stored user name.
2. Enter your user name using the virtual
keyboard, and press ENTER ( ) while [OK] is
selected.
Refer to “Using the virtual keyboard” on
page 50 for using the virtual keyboard.
BD561-N-BCANLLK-ENG.indd 54
2010.1.22 8:31:49 PM
Operation
Using the AccuWeather
55
6. Use U/u/I/i to select [Home] and press
ENTER ( ) to display weather information
of the selected city.
See on-line local and global weather forecasts
from AccuWeather.com.
Viewing weather information
1. On the player, select the [AccuWeather]
option in the [NetCast] menu using I/i,
and press ENTER ( ).
The city selection menu appears on the
screen.
Press red (R) coloured button to toggle
display between Fahrenheit or Celsius
thermometer.
7. Use I/i to select previous or next city, and
press ENTER ( ) to display the weather
information.
This step works only when you add more
than 1 city to the [Favorite city List].
• The weather information is not always correct.
2. Press ENTER while [Add City to Favorite City
List] is selected.
Operation
NOTE
4
• The weather information may be displayed in
English, if your own language is not available on
the AccuWeather service.
3. Select a region using U/u, and press ENTER
( ).
4. Select a, country using U/u/I/i, and press
ENTER ( ).
5. Select a city using U/u/I/i, and press
ENTER ( ).
BD561-N-BCANLLK-ENG.indd 55
2010.1.22 8:31:49 PM
56
Operation
Adding more cities
1. Use I/i to select [Favorite City List] on the
AccuWeather menu, and press ENTER ( ).
2. Press ENTER ( ) while [Add City to Favorite
City List] is selected.
3. Select a region, country and city using
U/u/I/i and ENTER ( ).
4. Repeats step 2-3 to add up to 5 cities.
4
Operation
Select the [X] symbol and press ENTER ( )
to delete the stored favorite city.
5. Use U/u to select a city form the [Favorite
City List], and press ENTER ( ) to display
the weather information.
BD561-N-BCANLLK-ENG.indd 56
2010.1.22 8:31:50 PM
Maintenance
57
5
Maintenance
Handling the Unit
Handling Discs
When shipping the unit
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints
do not get on the surface. Never stick paper or
tape on the disc.
Please save the original shipping carton and
packing materials. If you need to ship the unit,
for maximum protection, re-pack the unit as it
was originally packed at the factory.
Storing Discs
Keeping the exterior surfaces clean
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of
heat and never leave it in a parked car exposed
to direct sunlight.
•
Do not use volatile liquids such as
insecticide spray near the unit.
•
Wiping with strong pressure may damage
the surface.
Cleaning Discs
•
Fingerprints and dust on the disc can cause
poor picture quality and sound distortion.
Before playing, clean the disc with a clean
cloth. Wipe the disc from the centre to out.
Do not leave rubber or plastic products in
contact with the unit for a long period of
time.
Cleaning the unit
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available
cleaners, or anti-static spray intended for older
vinyl records.
To clean the player, use a soft, dry cloth. If
the surfaces are extremely dirty, use a soft
cloth lightly moistened with a mild detergent
solution. Do not use strong solvents such as
alcohol, benzine, or thinner, as these might
damage the surface of the unit.
5
Maintenance
Notes on Discs
Maintaining the Unit
The unit is a high-tech, precision device. If
the optical pick-up lens and disc drive parts
are dirty or worn, the picture quality could be
diminished. For details, please contact your
nearest authorized service centre.
BD561-N-BCANLLK-ENG.indd 57
2010.1.22 8:31:50 PM
58
Troubleshooting
6
Troubleshooting
General
Symptom
Cause & Solution
The Power does not turn
on.
•
Plug the power cord into the wall outlet securely.
The unit does not start
playback.
•
Insert a playable disc. (Check the disc type, colour system,
and regional code.)
•
Place the disc with the playback side down.
•
Place the disc on the disc tray correctly inside the guide.
•
Clean the disc.
•
Cancel the Rating function or change the rating level.
The angle cannot be
changed.
•
Multi-angles are not recorded on the DVD Video being
played.
Cannot play music/photo/
movie files.
•
The files are not recorded in a format that the unit can play.
•
The unit does not support the codec of the movie file.
The remote control does
not work properly.
•
The remote control is not pointed at the remote sensor of
the unit.
6
•
The remote control is too far from the unit.
Troubleshooting
•
There is an obstacle in the path of the remote control and
the unit.
•
The batteries in the remote control are exhausted.
The unit is plugged in, but
the power will not turn on
or off.
The unit is not operating
normally.
BD561-N-BCANLLK-ENG.indd 58
You can reset the unit as follows.
1. Press and hold the POWER button for at least five seconds.
This will force the unit to power off then turn the unit back
on.
2. Unplug the power cord, wait at least five seconds, and then
plug it in again.
2010.1.22 8:31:51 PM
Troubleshooting
59
Picture
Symptom
Cause & Solution
There is no picture.
•
Select the appropriate video input mode on the TV so the
picture from the unit appears on the TV screen.
•
Connect the video connection securely.
•
Check the [HDMI Colour Setting] in the [Setup] menu is
set to the appropriate item that conforms to your video
connection.
•
Your TV may not support the resolution you have set on the
player. Change the resolution that your TV accepts.
•
The player’s HDMI OUT jack is connected to a DVI device that
does not support copyright protection.
•
You are playing a disc recorded in a colour system that is
different from your TV.
•
Set the resolution which your TV accepts.
Picture noise appears
Sound
Cause & Solution
There is no sound or the
sound is distorted.
•
Connect the audio connection securely.
•
The input source setting on the amplifier or the connection
to the amplifier is incorrect.
•
The unit is in scan, slow motion, or pause mode.
•
The sound volume is low.
•
Check that the connected amplifier is compatible with the
audio format output from the player.
•
The player’s HDMI OUT jack is connected to a DVI device. The
DVI jack does not accept audio signal.
•
Check the device connected to player’s HDMI OUT jack is
compatible with audio format output from the player.
BD561-N-BCANLLK-ENG.indd 59
6
Troubleshooting
Symptom
2010.1.22 8:31:52 PM
60
Troubleshooting
Network
Symptom
Cause & Solution
BD-LIVE feature does not
work.
•
The connected USB storage may not have enough space.
Connect the USB storage with at least 1GB free space.
•
Ensure that the unit is correctly connected to the local area
network and can access the internet (see pages 20-22).
•
Your broadband speed may not be fast enough to use the
BD-LIVE features. Contact your Internet Service Provider (ISP)
and increase the broadband speed is recommended.
•
The [BD-LIVE connection] option in the [Setup] menu is set
to [Prohibited]. Set the option to [Permitted].
•
Your broadband service speed may not be fast enough to
stream video services. Contact your Internet Service Provider
(ISP) and increase the broadband speed is recommended.
Streaming video services
(such as YouTube™, etc.) are
often stopped or “buffered”
during playback.
6
Troubleshooting
Customer Support
You can update the Player using the latest software to enhance the products operation and/or
add new features. To obtain the latest software for this player (if updates have been made),
please visit http://lgservice.com or contact LG Electronics customer care centre.
BD561-N-BCANLLK-ENG.indd 60
2010.1.22 8:31:53 PM
Appendix
61
7
Appendix
Controlling a TV with
the Supplied Remote
Control
You can control your TV using the buttons
below.
Setting up the remote to
control your TV
You can operate your TV with the supplied
remote control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down 1 (TV POWER) button,
and press the manufacturer code for your
TV with the numerical buttons (see the
table below).
Manufacturer
Code Number
LG
1(Default), 2
Zenith
1, 3, 4
GoldStar
1, 2
Samsung
6, 7
Button
Operation
Sony
8, 9
1 (TV POWER)
Turn the TV on or off.
Hitachi
4
AV/INPUT
Switch the TV’s input
source between the TV
and other input sources.
PR/CH U/u
Scan up or down
through memorized
channels.
VOL +/–
Adjust the volume of
the TV
2. Release the 1 (TV POWER) button to
complete setting.
7
Appendix
Depending on your TV, some or all buttons
may not function on the TV, even after
entering the correct manufacturer code. When
you replace the batteries of the remote, the
code number you have set may be reset to
the default setting. Set the appropriate code
number again.
NOTE
Depending on the unit being connected, you may
not be able to control your TV using some of the
buttons.
BD561-N-BCANLLK-ENG.indd 61
2010.1.22 8:31:54 PM
62
Appendix
Network Software
Update
Network update notification
From time to time, performance improvements
and/or additional features or services may be
made available to units that are connected to
a broadband home network. If there is new
software available and the unit is connected
to a broadband home network, the player will
inform you about the update as follows.
Option 1:
1. The update menu will appear on the screen
when you turn on the player.
2. Use I/i to select a desired option and then
press ENTER ( ).
Option 2:
If the software update is available from the
update server, the “Update” icon appears at
the bottom of the Home menu. Press blue (B)
coloured button to start the update procedure.
Software Update
You can update the player using the latest
software to enhance the products operation
and/or add new features. You can update the
software by connecting the unit directly to the
software update server.
CAUTION
• Before updating the software in your player,
remove any disc and USB Device from the player.
• Before updating the software in your player, turn
the player off and then turn it back on.
• During the software update procedure, do
not turn off the player or disconnect AC
power, or do not press any button.
• If you cancel the update, turn off the power and
turn it on for stable performance.
• This unit cannot be updated to previous
software version.
[OK]
Starts the software update.
7
Appendix
[Cancel]
Exits the update menu and displays it next
booting.
1. Check the network connection and settings
(page 20-22).
2. Select [Software] option in the [Setup]
menu then press ENTER ( ).
[Hide]
Exits the update menu and it does not
appear until next software is uploaded in
the update server.
BD561-N-BCANLLK-ENG.indd 62
2010.1.22 8:31:54 PM
Appendix
3. Select [Update] option, and press ENTER
( ).
63
8. Select [OK] to start updating.
(Selecting [Cancel] will end the update and
downloaded file will not be re-usable. To
update software the next time, the software
update procedure has to be started from
the beginning again.)
CAUTION
The player will check for the newest update.
NOTE
• Pressing ENTER while checking for the update
will end the process.
• If there is no update available, the Message, “No
update is found.” appears. Press ENTER to return
to the [Home Menu].
4. If newer version exists, the message “A
new update was found. Do you want to
download it?” appears.
Do not turn off the power during the software
update.
NOTE
If the software includes the driver update, disc tray
may open during the process.
9. When update is completed, the message,
“Update is complete.” will appear, and then
power will turn off automatically after 5
seconds.
10. Turn the power back on. The system now
operates with the new version.
NOTE
5. Select [OK] to download the update.
(Selecting [Cancel] will end the update.)
7. When downloading is completed, the
message, “Download is complete. Do you
want to update?” appears.
BD561-N-BCANLLK-ENG.indd 63
7
Appendix
6. The player starts downloading the newest
update from the server. (Downloading will
takes several minutes depending on your
home network condition)
The Software Update function may not work
properly depending on your internet environment.
In this case, you can obtain the latest software from
the authorized LG Electronics Service Centre then
update your player. Refer to “Customer Support” on
page 60.
2010.1.22 8:31:54 PM
64
Appendix
Area Code List
Choose an area code from this list.
Area
Code Area
Afghanistan
Code Area
Code Area
Code
FJ Monaco
MC Singapore
SG
SK
Argentina
AR Finland
FI Mongolia
MN Slovak Republic
Australia
AU France
FR Morocco
MA Slovenia
Austria
AT Germany
DE Nepal
NP South Africa
ZA
Belgium
BE Great Britain
GB Netherlands
NL South Korea
KR
Bhutan
BT Greece
GR Netherlands
GL Antilles
Bolivia
BO Greenland
Brazil
BR Hong Kong
Cambodia
KH Hungary
Canada
CA India
Chile
CL Indonesia
China
CN Israel
Colombia
CO Italy
Congo
CG Jamaica
Costa Rica
CR Japan
Croatia
HR Kenya
Czech Republic
CZ Kuwait
Denmark
7
AF Fiji
DK Libya
Ecuador
EC Luxembourg
Egypt
EG Malaysia
El Salvador
SV Maldives
Ethiopia
ET Mexico
HK New Zealand
HU Nigeria
IN Norway
ID Oman
IL Pakistan
IT Panama
JM Paraguay
JP Philippines
KE Poland
KW Portugal
LY Romania
LU Russian
Federation
MY
Saudi Arabia
MV
Senegal
MX
Spain
SI
ES
AN Sri Lanka
NZ Sweden
LK
NG Switzerland
NO Taiwan
CH
SE
TW
OM Thailand
PK Turkey
TH
PA Uganda
PY Ukraine
UG
PH United States
PL Uruguay
TR
UA
US
UY
PT Uzbekistan
RO Vietnam
UZ
Zimbabwe
ZW
RU
VN
SA
SN
Appendix
BD561-N-BCANLLK-ENG.indd 64
2010.1.22 8:31:55 PM
Appendix
65
Language code List
Use this list to input your desired language for the following initial settings: [Disc Audio],
[Disc Subtitle] and [Disc Menu].
Language
Code Language
Code Language
Code Language
Code
6565
French
7082
Lithuanian
7684
Sindhi
8368
Afrikaans
6570
Frisian
7089
Macedonian
7775
Singhalese
8373
Albanian
8381
Galician
7176
Malagasy
7771
Slovak
8375
Ameharic
6577
Georgian
7565
Malay
7783
Slovenian
8376
Arabic
6582
German
6869
Malayalam
7776
Spanish
6983
Armenian
7289
Greek
6976
Maori
7773
Sudanese
8385
Assamese
6583
Greenlandic
7576
Marathi
7782
Swahili
8387
Aymara
6588
Guarani
7178
Moldavian
7779
Swedish
8386
Azerbaijani
6590
Gujarati
7185
Mongolian
7778
Tagalog
8476
Bashkir
6665
Hausa
7265
Nauru
7865
Tajik
8471
Basque
6985
Hebrew
7387
Nepali
7869
Tamil
8465
Bengali; Bangla 6678
Hindi
7273
Norwegian
7879
Telugu
8469
Bhutani
6890
Hungarian
7285
Oriya
7982
Thai
8472
Bihari
6672
Icelandic
7383
Panjabi
8065
Tonga
8479
Breton
6682
Indonesian
7378
Pashto, Pushto 8083
Turkish
8482
Bulgarian
6671
Interlingua
7365
Persian
7065
Turkmen
8475
Burmese
7789
Irish
7165
Polish
8076
Twi
8487
Byelorussian
6669
Italian
7384
Portuguese
8084
Ukrainian
8575
Chinese
9072
Japanese
7465
Quechua
8185
Urdu
8582
Croatian
7282
Kannada
7578
8590
6783
Kashmiri
7583
Rhaeto-Romance
8277
Uzbek
Czech
Vietnamese
8673
Danish
6865
Kazakh
7575
Rumanian
8279
Volapük
8679
Dutch
7876
Kirghiz
7589
Russian
8285
Welsh
6789
English
6978
Korean
7579
Samoan
8377
Wolof
8779
Esperanto
6979
Kurdish
7585
Sanskrit
8365
Xhosa
8872
7168
Yiddish
7473
8382
Yoruba
8979
Zulu
9085
Estonian
6984
Laothian
7679
Scots Gaelic
Faroese
7079
Latin
7665
Serbian
Fiji
7074
Latvian, Lettish 7686
Serbo-Croatian 8372
Finnish
7073
Lingala
Shona
BD561-N-BCANLLK-ENG.indd 65
7678
7
Appendix
Afar
8378
2010.1.22 8:31:55 PM
66
Appendix
Trademarks and
Licenses
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
“Blu-ray Disc” is a trademark.
“BD-LIVE” logo is a trademark of Blu-ray Disc
Association.
This product is licensed under the AVC patent
portfolio license and VC-1 patent portfolio license
for the personal and non-commercial use of a
consumer to (i) encode video in compliance with
the AVC Standard and VC-1 Standard (“AVC/VC-1
Video”) and/or (ii) decode AVC/VC-1 Video that was
encoded by a consumer engaged in a personal and
non-commercial activity and/or was obtained from
a video provider licensed to provide AVC/VC-1 Video.
No license is granted or shall be implied for any other
use. Additional information may be obtained from
MPEG LA, LLC. See http://www.mpegla.com.
“BONUSVIEW” is trademark of Blu-ray Disc
Association.
YouTube™ is a trademark of Google Inc.
Java and all Java-based trademarks and logos
are trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and other
countries.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
7
Picasa™ Web Albums is a trademark of Google Inc.
Manufactured under license under U.S. Patent #’s:
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616;
6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 &
other U.S. and worldwide patents issued & pending. DTS
is a registered trademark and the DTS logos, Symbol,
DTS-HD and DTS-HD Master Audio are trademarks of
DTS, Inc. © 1996-2008 DTS, Inc. All Rights Reserved.
Appendix
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI licensing LLC.
DivX is a registered trademark of DivX, Inc., and is
used under license.
“x.v.Colour” is a trademark of Sony Corporation.
“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
BD561-N-BCANLLK-ENG.indd 66
2010.1.22 8:31:55 PM
Appendix
On the LG products, an innovative power
consumption system in stand-by mode is built.
Therefore, the small amounts of electricity
areconsumed even though the power plug is
inserted.
Gracenote®, Gracenote logo and logotype, and the
“Powered by Gracenote” logo are either registered
trademarks or trademarks of Gracenote, Inc. in the
United States and/or other countries.
Music recognition technology and related data are
provided by Gracenote®.
Gracenote® End User License Agreement
This application or device contains software from
Gracenote, Inc. of Emeryville, California
(“Gracenote”). The software from Gracenote (the
“Gracenote Software”) enables this application to
perform disc and/or file identification and obtain
music-related information, including name, artist,
track, and title information (“Gracenote Data”) from
online servers or embedded databases (collectively,
“Gracenote Servers”) and to perform other functions.
You may use Gracenote Data only by means of the
intended End-User functions of this application or
device.
You agree that your non-exclusive license to use
the Gracenote Data, the Gracenote Software, and
Gracenote Servers will terminate if you violate
these restrictions. If your license terminates, you
agree to cease any and all use of the Gracenote
Data, the Gracenote Software, and Gracenote
Servers. Gracenote reserves all rights in Gracenote
Data, the Gracenote Software, and the Gracenote
Servers, including all ownership rights. Under no
circumstances will Gracenote become liable for any
BD561-N-BCANLLK-ENG.indd 67
payment to you for any information that you provide.
You agree that Gracenote, Inc. may enforce its rights
under this Agreement against you directly in its own
name.
The Gracenote service uses a unique identifier to
track queries for statistical purposes. The purpose of
a randomly assigned numeric identifier is to allow
the Gracenote service to count queries without
knowing anything about who you are. For more
information, see the web page for the Gracenote
Privacy Policy for the Gracenote service.
The Gracenote Software and each item of Gracenote
Data are licensed to you “AS IS.” Gracenote makes
no representations or warranties, express or implied,
regarding the accuracy of any Gracenote Data from
in the Gracenote Servers. Gracenote reserves the
right to delete data from the Gracenote Servers or to
change data categories for any cause that Gracenote
deems sufficient. No warranty is made that the
Gracenote Software or Gracenote Servers are errorfree or that functioning of Gracenote Software or
Gracenote Servers will be uninterrupted. Gracenote
is not obligated to provide you with new enhanced
or additional data types or categories that Gracenote
may provide in the future and is free to discontinue
its services at any time.
GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND
NON-INFRINGEMENT. GRACENOTE DOES NOT
WARRANT THE RESULTS THAT WILL BE OBTAINED BY
YOUR USE OF THE GRACENOTE SOFTWARE OR ANY
GRACENOTE SERVER. IN NO CASE WILL GRACENOTE
BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES OR FOR ANY LOST PROFITS OR LOST
REVENUES.
© Gracenote, Inc. 2009
7
Appendix
You agree that you will use Gracenote Data, the
Gracenote Software, and Gracenote Servers for
your own personal non-commercial use only. You
agree not to assign, copy, transfer or transmit the
Gracenote Software or any Gracenote Data to any
third party. YOU AGREE NOT TO USE OR EXPLOIT
GRACENOTE DATA, THE GRACENOTE SOFTWARE,
OR GRACENOTE SERVERS, EXCEPT AS EXPRESSLY
PERMITTED HEREIN.
67
2010.1.22 8:31:56 PM
68
Appendix
Audio Output
Specifications
Jack/Setting
Source
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
DTS-HD
Linear PCM 2ch
Linear PCM 5.1ch
Linear PCM 7.1ch
Digital Output (DIGITAL AUDIO OUT) *4
Analog
2CH Output
PCM Stereo
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
DTS Re-encode*3 *5
DTS
DTS
DTS
DTS
DTS
DTS
DTS
DTS
Jack/Setting
Source
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
DTS-HD
Linear PCM 2ch
Linear PCM 5.1ch
Linear PCM 7.1ch
7
Dolby Digital
Dolby Digital
Dolby Digital
DTS
DTS
PCM 2ch
PCM 2ch
PCM 2ch
HDMI OUT
PCM Stereo
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM Multi-Ch *3
PCM 5.1ch
PCM 5.1ch
PCM 5.1ch
PCM 5.1ch
PCM 7.1ch
PCM 2ch
PCM 5.1ch
PCM 7.1ch
Appendix
*1 The secondary and interactive audio may
not be included in the output bitstream if
[Digital Output] or [HDMI] option is set to
[Primary Pass-Thru]. (Except LPCM Codec :
the output always includes interactive and
secondary audio.)
*2 This player automatically selects the HDMI
audio according to the decoding capability
of the connected HDMI device even though
[HDMI] option is set to [Primary Pass-Thru].
BD561-N-BCANLLK-ENG.indd 68
Primary Pass-Thru
DTS Re-encode*3 *5
DTS
DTS
DTS
DTS
DTS
DTS
DTS
DTS
Primary Pass-Thru *1 *2 *3
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
DTS-HD
Linear PCM 2ch
Linear PCM 5.1ch
Linear PCM 7.1ch
*3 The [PCM Multi-CH]/[Primary Pass-Thru]
setting of the [HDMI] option and [DTS reencode] setting of the [Digital Output]
option cannot be set together. If you set
them together, the [HDMI] or [Digital
Output] option is set to [PCM Stereo]
automatically.
*4 On the PCM audio output, the sampling
frequency of DIGITAL AUDIO OUT is limited
to 96 kHz.
2010.1.22 8:31:56 PM
Appendix
*5 If the [HDMI] or [Digital Output] option is
set to [DTS re-encode], the audio output is
limited to 48 kHz and 5.1Ch. If the [HDMI]
or [Digital Output] option is set to [DTS
re-encode], the DTS Re-encode audio is
output for BD-ROM discs, and the original
audio is output for the other discs (like
[Primary Pass-Thru]).
If [HDMI] option is set to [PCM Multi-CH]
and [Digital Output] option is set to [Primary
Pass-Thru] while playback Dolby Digital Plus
or TrueHD audio, DIGITAL AUDIO OUT is
limited to “PCM 2ch”.
•
If the HDMI connection is version 1.3 and
Dolby Digital Plus/Dolby TrueHD is output
from HDMI OUT jack, DIGITAL AUDIO OUT
jack is limited to “PCM 2ch” (When the HDMI
and DIGITAL AUDIO OUT are connected
simultaneously).
•
The audio is outputted as PCM 48 kHz/
16 bit for MP3/WMA file and PCM
44.1 kHz/16 bit for Audio CD while playback.
•
The Dolby TrueHD audio recorded on some
Blu-ray discs consists of Dolby Digital and
TrueHD audio. Dolby Digital audio is output
through DIGITAL AUDIO OUT jacks and “DD
” displays on the screen if TrueHD audio is
not output (for example, when [HDMI] is set
to [PCM Stereo] and [Digital Output] is set
to [Primary Pass-Thru]).
•
You must select a digital audio output and
a maximum sampling frequency that your
Amplifier (or AV receiver) accepts using
[Digital Output], [HDMI] and [Sampling
Freq.] options on the [Setup] menu (see
page 27).
•
With digital audio connection (DIGITAL
AUDIO OUT or HDMI), Disc Menu button
sounds of BD-ROM may not be heard if the
[Digital Output] or [HDMI] option is set to
[Primary Pass-Thru].
•
If the audio format of the digital output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
BD561-N-BCANLLK-ENG.indd 69
Multi-channel Digital Surround Sound via
digital connection can only be obtained
if your receiver is equipped with a Digital
Multi-channel decoder.
7
Appendix
•
•
69
2010.1.22 8:31:56 PM
70
Appendix
Video Output
Resolution
When the non-copy protected media is playing back
Video Out
Resolution
480i
HDMI OUT
COMPONENT VIDEO OUT
HDMI connected
480p
HDMI disconnected
480i
480p
480p
480p
720p
720p
720p
1080i
1080i
1080p /24 Hz
1080p / 24 Hz
480i
1080i
1080i
1080p / 60 Hz
1080p / 60 Hz
480i
1080i
When the copy protected media is playing back
Video Out
Resolution
480i
HDMI OUT
480p
HDMI disconnected
480i
480p
480p
720p
720p
480i
480p
1080i
1080i
480i
480p
1080p /24 Hz
1080p / 24 Hz
480i
480p
1080p / 60 Hz
1080p / 60 Hz
480i
480p
HDMI OUT connection
7
COMPONENT VIDEO OUT
HDMI connected
Appendix
•
If you select a resolution manually and then
connect the HDMI jack to TV and your TV
does not accept it, the resolution setting is
set to [Auto].
•
If you select a resolution that your TV
does not accept, the warning message
will appear. After resolution change,
if you cannot see the screen, please
wait 20 seconds and the resolution will
automatically revert back to the previous
resolution.
480p
•
The 1080p video output frame rate may
be automatically set to either 24 Hz or
60 Hz depending both on the capability
and preference of the connected TV and
based on the native video frame rate of the
content on the BD-ROM disc.
COMPONENT VIDEO OUT
Connection
BD and DVD video stream could prevent upscaling on analog output.
VIDEO OUT connection
The resolution of the VIDEO OUT jack is always
output at 480i resolution.
BD561-N-BCANLLK-ENG.indd 70
2010.1.22 8:31:56 PM
Appendix
71
System
Specifications
Laser:
Semiconductor laser
General
wavelength:
405 nm / 650 nm
Power requirements:
AC 120 V ~, 60 Hz
Signal system:
Standard NTSC colour TV system
Power consumption:
20 W
Frequency response:
20 Hz to 20 kHz
(48 kHz, 96 kHz, 192 kHz sampling)
Dimensions (W x H x D):
Approx. 430 x 44 x 204 mm without foot
Signal-to-noise ratio:
Net Weight (Approx.):
More than 100 dB
(ANALOG OUT connectors only)
2 kg
Operating temperature:
Harmonic distortion:
5 °C to 35 °C
Less than 0.008 %
Operating humidity:
Dynamic range:
5 % to 90 %
More than 95 dB
LAN port:
Ethernet jack x 1, 10BASE-T/100BASE-TX
Outputs
Bus Power Supply (USB):
VIDEO OUT:
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
COMPONENT VIDEO OUT:
(Y) 1.0 V (p-p), 75 Ω, sync negative,
RCA jack x 1,
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
HDMI OUT (video/audio):
19 pin (HDMI standard, Type A), Version 1.3
DIGITAL OUT (COAXIAL):
0.5 V (p-p), 75 Ω, RCA jack x 1
BD561-N-BCANLLK-ENG.indd 71
•
500 mA
Design and specifications are subject to
change without notice.
7
Appendix
ANALOG AUDIO OUT:
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
DC 5 V
2010.1.22 8:31:57 PM
72
Appendix
Important Information
Relating to Network
Services
PLEASE READ CAREFULLY. USE OF THE NETWORK
SERVICES IS SUBJECT TO THE FOLLOWING TERMS
AND CONDITIONS.
Use of the Network Services requires an Internet
connection which is sold separately and for which
you are solely responsible. The Network Services may
be limited or restricted depending upon the quality,
capabilities and technical limitations of your Internet
service.
The Network Services belong to third parties and
may be protected by copyright, patent, trademark
and/or other intellectual property laws. The Network
Services are provided solely for your personal and
noncommercial use. Unless expressly authorized by
the respective content owner or service provider,
you shall not modify, copy, republish, upload, post,
transmit, translate, sell, create derivative works,
exploit, or distribute in any manner or medium any
content or services accessible through this product.
7
Appendix
LG IS NOT RESPONSIBLE FOR YOUR USE OF
THE NETWORK SERVICES. THE NETWORK
SERVICES ARE PROVIDED “AS IS.” TO THE FULLEST
EXTENT PERMISSIBLE BY LAW, LG MAKES NO
REPRESENTATIONS OR WARRANTIES OF ANY KIND
WHATSOEVER (i) FOR THE ACCURACY, VALIDITY,
TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY
NETWORK SERVICE MADE AVAILABLE THROUGH
THIS PRODUCT; OR (ii) THAT THE NETWORK SERVICES
ARE FREE OF VIRUSES OR OTHER COMPONENTS
THAT MAY INFECT, HARM, OR CAUSE DAMAGE TO
THIS PRODUCT, YOUR COMPUTER, TELEVISION,
OTHER EQUIPMENT, OR ANY OTHER PROPERTY. LG
EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO, WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
BD561-N-BCANLLK-ENG.indd 72
UNDER NO CIRCUMSTANCES AND UNDER NO
LEGAL THEORY, WHETHER IN CONTRACT, TORT,
STRICT LIABILITY OR OTHERWISE, SHALL LG BE
LIABLE TO YOU OR ANY THIRD PARTY FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, STATUTORY,
CONSEQUENTIAL OR OTHER DAMAGES OR
ATTORNEY FEES OR EXPENSES RELATING TO OR
ARISING OUT OF THE NETWORK SERVICES EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR
IF SUCH DAMAGES COULD HAVE BEEN REASONABLY
FORESEEN.
The Network Services may be terminated or
interrupted at any time, and LG makes no
representation or warranty that any Network Service
will remain available for any period of time. Use of the
Network Services may be subject to additional terms
and conditions of the respective third party service
provider. The Network Services are transmitted by
third parties by means of networks and transmission
facilities over which LG has no control. LG EXPRESSLY
DISCLAIMS ANY RESPONSIBILITY OR LIABILITY
FOR ANY INTERRUPTION OR SUSPENSION OF ANY
NETWORK SERVICE.
LG shall be neither responsible nor liable for
customer service related to the Network Services.
Any question or request should be made directly to
the respective Network Service providers.
“Network Service(s)” means the third party services
accessible through this product including but
not limited to all data, software, links, messages,
video and other content found thereon or used in
connection therewith.
“LG” means LG Electronics, Inc. its parent company
and all of their respective subsidiaries, affiliates and
related companies worldwide.
2010.1.22 8:31:57 PM
Appendix
Open source software
notice
The following GPL executables and LGPL libraries
used in this product are subject to the GPL2.0/
LGPL2.1 License Agreements:
GPL EXECUTABLES: Linux kernel 2.6, bash, busybox,
cramfs, dhcpcd, e2fsprogs, fdisk, mkdosfs, mtd-utils,
net-tools, procps, samba-3.0.25b, sysutils, tcpdump,
tftpd, tinylogin, unzip, utelnetd
LGPL LIBRARIES: uClibc, DirectFB, blowfish, cairo,
ffmpeg, iconv, libusb, mpg123
gSOAP Public License 1.3 LIBRARY: gsoap
LG El ectronics offers to provide source code to
you on CD-ROM for a charge covering the cost of
performing such distribution, such as the cost of
media, shipping and handling upon e-mail request
to LG Electronics at: opensource@lge.com
This offer is valid for a period of three(3) years from
the date of the distribution of this product by LG
Electronics.
You can obtain a copy of the GPL, LGPL licenses
from http://www.gnu.org/licenses/old-licenses/gpl2.0.html and http://www.gnu.org/licenses/oldlicenses/lgpl-2.1.html .
Also you can obtain a copy of gSOAP public license
from http://www.cs.fsu.edu/~engelen/license.html.
This software is based in part on the work of the
Independent JPEG Group copyright © 1991 - 1998,
Thomas G. Lane.
BD561-N-BCANLLK-ENG.indd 73
• OpenSSL:
– cryptographic software written by Eric Young
(eay@cryptsoft.com).
– software written by Tim Hudson
(tjh@cryptsoft.com).
– software developed by the OpenSSL Project
for use in the OpenSSL Toolkit.
(http://www.openssl.org)
• png: copyright © 2004 Glenn Randers-Pehrson
• portmap : copyright © 1990 The Regents of the
University of California
• ptmalloc : copyright © 2001-2006 Wolfram Gloger
• UnitTest++ : copyright © 2006 Noel Llopis and
Charles Nicholson
• UPnP SDK : copyright © 2000-2003 Intel
Corporation
• strace :
copyright © 1991, 1992 Paul Kranenburg
copyright © 1993 Branko Lankester
copyright © 1993 Ulrich Pegelow
copyright © 1995, 1996 Michael Elizabeth Chastain
copyright © 1993, 1994, 1995, 1996 Rick Sladkey
copyright © 1999,2000 Wichert Akkerman
• xml2 : copyright © 1998-2003 Daniel Veillard
• XML-RPC For C/C++:
copyright © 2001 by First Peer, Inc. All rights
reserved.
copyright © 2001 by Eric Kidd. All rights reserved.
• zlib: copyright © 1995-2002 Jean-loup Gailly and
Mark Adler.
All rights reserved.
Permission is hereby granted, free of charge, to
any person obtaining a copy of this software and
associated documentation files (the “Software”), to
deal in the Software without restriction, including
without limitation the rights to use, copy, modify,
merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to
whom the Software is furnished to do so, subject to
the following conditions:
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL THE AUTHORS OR COPYRIGHT HOLDERS
BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
7
Appendix
This product includes
• boost C++: copyright © Beman Dawes 1999-2003
• c-ares : copyright © 1998 by the Massachusetts
Institute of Technology
• curl: copyright © 1996 - 2008, Daniel Stenberg
• expat: copyright © 2006 expat maintainers
• freetype: copyright © 2003 The FreeType Project
(www.freetype.org).
• jpeg: This software is based in part on the work of
the Independent JPEG Group copyright © 1991 –
1998, Thomas G. Lane.
• mng: copyright © 2000-2007 Gerard Juyn, Glenn
Randers-Pehrson
• ntp : copyright © David L. Mills 1992-2006
73
2010.1.22 8:31:57 PM
LG Customer Information Center
1-888-542-2623 CANADA
As an ENERGY STAR® Partner, LG has
determined that this product or
product models meet the ENERGY STAR
® guidelines for energy efficiency.
ENERGY STAR® is a U.S. registered mark.
BD561-N-BCANLLK-ENG.indd 74
2010.1.22 8:31:57 PM