LH-T6749A JA1ULLK_ENG
DVD/CD RECEIVER
OWNER’S MANUAL
MODEL: LGDVT418
Before connecting up, operating or repairing this product,
please read this instruction booklet carefully and
completely.
LH-T6749A JA1ULLK
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to
the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space
such as a book case or similar unit.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
CLASSE 1 PRODUIT LASER
CAUTION:
This Digital Video Disc Receiver employs a Laser System.
To ensure proper use of this product, please read this owner’s
manual carefully and retain for future reference. Should the
unit require maintenance, contact an authorized service
location-see service procedure.
Use of controls, adjustments or the performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus shall not be exposed to water,
dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit;
That is, a single outlet circuit which powers only that appliance
and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or
damaged wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous. Any of
these conditions could result in electric shock or fire.
Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it,
discontinue use of the appliance, and have the cord replaced
with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse,
such as being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall outlets, and
the point where the cord exits the appliance.
2
REGULATORY INFORMATION:
FCC Part 15
This product has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the product is
operated in a residential installation. This product generates,
uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this product does cause harmful
interference to radio or television reception, which can be
determined by turning the product off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the product and
receiver.
• Connect the product into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
FCC WARNING: This equipment may generate or use radio
frequency energy. Changes or modifications to this equipment
may cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user could
lose the authority to operate this equipment if an unauthorized
change or modification is made.
otes on copyrights:
It is forbidden by law to copy, broadcast, show, broadcast
via cable, play in public, or rent copyright material without
permission.
This product is equipped with copy protection measures
developed by Macrovision. Copy protection signals are
recorded on some discs. When recording these discs on a
VCR,
picture noise will appear during playback.
This product incorporates copyright protection technology that
is protected by certain U.S. patent claims and other intellectual
property rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection technology must
be authorized by Macrovision Corporation, and is intended for
home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
SERIAL NUMBER: The serial number is found on the back of
this unit. This number is unique to this unit and not available to
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No. ___________________________________
IMPORTANT SAFETY INSTRUCTIONS
Introduction
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S
MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS MANUAL FOR FUTURE
REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock
or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for
installation, use, and servicing.
This unit does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1.
Read these instructions. - All these safety and
operating instructions should be read before the
product is operated.
2.
Keep these instructions. - The safety, operating
and use instructions should be retained for future
reference.
3.
Heed all warnings. - All warnings on the product
and in the operating instructions should be adhered
to.
4.
Follow all instructions. - All operating and use
instructions should be followed.
5.
Do not use this apparatus near water. – For
example: near a bath tub, wash bowl, kitchen sink,
laundry tub, in a wet basement; or near a swimming
pool; and like.
6.
Clean only with dry cloth. – Unplug this product
from the wall outlet before cleaning. Do not use
liquid cleaners.
7.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over- heating.
The openings should never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product should not be placed in a
built-in installation such as a bookcase or rack
unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
8.
Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9.
Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by
the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as powersupply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
3
Contents
Introduction . . . . . . . . . . . . . . . . . . . .3-10
IMPORTANT SAFETY INSTRUCTIONS . . . . . .3
Symbol used in this Manual . . . . . . . . . . . . . . .5
About the
Symbol Display . . . . . . . . . . . . .5
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . .5
HANDLING DISCS . . . . . . . . . . . . . . . . . . . . . . .5
STORING DISCS . . . . . . . . . . . . . . . . . . . . . . . . .5
CLEANING DISCS . . . . . . . . . . . . . . . . . . . . . . . .5
Types of Playable Discs
Regional code . . . . . .
Disc-related terms . . .
Front Panel . . . . . . . . .
Display Window . . . . . .
Remote Control . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. . . . . . . .6
. . . . . . . .6
. . . . . . . .7
. . . . . . . .8
. . . . . . . .8
. . . . . . . .9
REMOTE CONTROL OPERATION RANGE . . . . .9
REMOTE CONTROL BATTERY INSTALLATION .9
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Installation and Setup . . . . . . . . . . .11-22
TV Connections . . . . . . . . . . . . . . . . . . . . . . .11
Audio Connection to Optional Equipment . . . .12
Antenna Connections . . . . . . . . . . . . . . . . . . .13
Assembling and Connecting to the Speakers .14
Speaker System Connection . . . . . . . . . . . . . .15
Speaker Positioning . . . . . . . . . . . . . . . . . . . .16
Mini Glossary for Audio Stream &
Surround Mode . . . . . . . . . . . . . . . . . . . . . . . .17
Sound Mode . . . . . . . . . . . . . . . . . . . . . . . . . .17
On-Screen Display . . . . . . . . . . . . . . . . . . . . .18
PLAYBACK STATUS/RESTRICTIONS . . . . . . . .18
Initial Settings
. . . . . . . . . . . . . . . . . . . . . .19-22
GENERAL OPERATION . . . . . . . . . . . . . . . . . . .19
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
• Menu Language . . . . . . . . . . . . . . . . . . . . . .19
• Disc Audio / Subtitle / Menu . . . . . . . . . . . . .19
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
• TV Aspect . . . . . . . . . . . . . . . . . . . . . . . . . .19
• Display Mode . . . . . . . . . . . . . . . . . . . . . . . .19
• Progressive Scan . . . . . . . . . . . . . . . . . . . . . .19
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
• 5.1 Speaker Setup . . . . . . . . . . . . . . . . . . . . .20
• Dynamic Range Control (DRC) . . . . . . . . . .20
• Vocal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
LOCK (Parental Control) . . . . . . . . . . . . . . . . . .21
• Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
• Password (Security Code) . . . . . . . . . . . . . . .21
• Country Code . . . . . . . . . . . . . . . . . . . . . . . .21
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
• Auto Play . . . . . . . . . . . . . . . . . . . . . . . . . . .22
• B.L.E. (Black Level Expansion) . . . . . . . . . . .22
Operation . . . . . . . . . . . . . . . . . . . . .23-35
Playing a DVD . . . . . . . . . . . . . . . . . . . . . .23-25
PLAYBACK SETUP
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
....
Special DVD Features
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. . . . . . . . . . . .24
. . . . . . . . . . . .24
. . . . . . . . . . . .24
. . . . . . . . . . . .24
. . . . . . . . . . . .24
. . . . . . . . . . . .24
. . . . . . . . . . . .25
. . . . . . . . . . . .25
. . . . . . . . . . . .25
. . . . . . . . . . . . . . . . . .25
CHECKING THE CONTENTS OF DVD
DISCS: MENUS . . . . . . . . . . . . . . . . . . . . . . . . .25
TITLE MENU . . . . . . . . . . . . . . . . . . . . . . . . . .25
DISC MENU . . . . . . . . . . . . . . . . . . . . . . . . . . .25
CAMERA ANGLE . . . . . . . . . . . . . . . . . . . . . . .25
CHANGING THE AUDIO LANGUAGE . . . . . . . . .25
SUBTITLES . . . . . . . . . . . . . . . . . . . . . . . . . . .25
DVD Audio Discs . . . . . . . . . . . . . . . . . . . . . . .26
MOVING TO ANOTHER GROUP . . . . . . . . . . . .26
VIEWING ANOTHER PAGE . . . . . . . . . . . . . . . .26
Playing an Audio CD or MP3/WMA Disc . . . . .27
Audio CD and MP3 / WMA Disc Features . . . .28
PAUSE . . . . . . . . . . . . . . . . . . .
MOVING TO ANOTHER TRACK
REPEAT TRACK/ALL/OFF . . . .
SEARCH . . . . . . . . . . . . . . . .
REPEAT A-B . . . . . . . . . . . . . .
3D SURROUND . . . . . . . . . . . .
Programmed Playback
. . . . . . . . . . . . .28
. . . . . . . . . . . .28
. . . . . . . . . . . . .28
. . . . . . . . . . . . .28
. . . . . . . . . . . . .28
. . . . . . . . . . . . .28
. . . . . . . . . . . . . . . . .29
REPEAT PROGRAMMED TRACKS . . . . . . . . .29
ERASING A TRACK FROM PROGRAM LIST . . .29
ERASING THE COMPLETE PROGRAM LIST . .29
Viewing a JPEG Disc . . . . . . . . . . . . . . . . . . .30
SLIDE SHOW . . . . . . . . . . . . . . .
STILL PICTURE . . . . . . . . . . . . . .
MOVING TO ANOTHER FILE . . .
ZOOM . . . . . . . . . . . . . . . . . . . . . .
TO ROTATE PICTURE . . . . . . . . .
TO LISTEN TO MP3/WMA MUSIC
WATCHING PICTURE . . . . . . . . .
.
.
.
.
.
. . . . . . . . . .30
. . . . . . . . . .30
. . . . . . . . . .30
. . . . . . . . . .30
. . . . . . . . . .30
. . . . . . . . . . .30
Playing a DVD VR format Disc . . . . . . . . . . . .31
Maintenance and Service . . . . . . . . . . . . . . . .31
HANDLING THE UNIT . . . . . . . . . . . . . . . . . . . .31
Additional Features . . . . . . . . . . . . . . . . . . . . .32
VIDEO MODE SETTING . . . . . . . . . . . . . . . . . . .32
5.1 Speaker Setup . . . . . . . . . . . . . . . . . . . . .33
SPEAKER SETUP . . . . . . . . . . . . . . . . . . . . . . .33
Presetting the Radio Stations
Listening to the Radio . . . . .
Sleep Timer Setting . . . . . . .
Dimmer . . . . . . . . . . . . . . . .
Mute . . . . . . . . . . . . . . . . . .
Using Headphone Jack . . . .
Selecting Input Source . . . . .
. . . . . . . . . . . . .34
. . . . . . . . . . . . . .34
. . . . . . . . . . . . . .35
. . . . . . . . . . . . . .35
. . . . . . . . . . . . . .35
. . . . . . . . . . . . . .35
. . . . . . . . . . . . . .35
. . . . . . . . . . . . . . . . . . . .23
General Features . . . . . . . . . . . . . . . . . . . . . .23
MOVING TO ANOTHER TITLE/GROUP . . . . . . .23
MOVING TO ANOTHER CHAPTER/TRACK . . . .23
SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
STILL PICTURE AND FRAME-BY-FRAME
4
PLAYBACK . . . . . .
SLOW SCAN . . . .
REPEAT A-B . . . .
REPEAT . . . . . . . .
3D SURROUND
TIME SEARCH . . .
ZOOM
.......
MARKER SEARCH
PAUSE . . . . . . . . .
Reference . . . . . . . . . . . . . . . . . . . .36-39
Language Codes . . . . . . . . . . . . . . . . . . . . . . .36
Country Codes . . . . . . . . . . . . . . . . . . . . . . . .36
Troubleshooting . . . . . . . . . . . . . . . . . . . . .37-38
Specifications . . . . . . . . . . . . . . . . . . . . . . . . .39
Introduction
This manual provides information on the operation
and maintenance of your DVD/CD receiver. Should
the unit require service, contact an authorized service
location.
Symbol Used in this Manual
The lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk of
electric shock.
About the
Symbol Display
Introduction
To ensure proper use of this product, please read this
owner’s manual carefully and retain for future
reference.
“
” may appear on your TV display during
operation and indicates that the function explained in
this owner’s manual is not available on that specific
DVD video disc.
Notes on Discs
HANDLING DISCS
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
The exclamation point alerts you to the
presence of important operating and
maintenance / servicing instructions.
Indicates hazards likely to cause harm to the
unit itself or other material damage.
Note:
Indicates special notes and operating features.
STORING DISCS
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
CLEANING DISCS
Tip:
Indicates tips and hints for making the task easier.
A section whose title has one of the following symbols
is applicable only to the disc represented by the
symbol.
DVD-V
DVD and finalized DVD±R/RW
DVD-A
DVD Audio discs
CD
Audio CDs
MP3
MP3 Discs
WMA
WMA Discs
JPEG
JPEG Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
5
Types of Playable Discs
DVD
(8 cm / 12 cm disc)
DVD audio discs
(8 cm / 12 cm disc)
Audio CD
(8 cm / 12 cm disc)
In addition, this unit plays DVD -R, DVD +R,
DVD -RW, DVD +RW, and CD-R / CD-RW that
contains audio titles, MP3, WMA, and/or JPEG files.
Notes:
• Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD -R, DVD +R,
DVD -RW, DVD +RW) disc itself, some CD-R/RW
(or DVD -R, DVD +R, DVD -RW, DVD +RW) discs
cannot be played on the unit.
• Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
• Do not use irregularly shaped CDs (e.g., heartshaped or octagonal) since they may result in
malfunctions.
Regional code
This DVD/CD receiver is designed and
manufactured for playback of region “1”
encoded DVD software. This unit can play
only DVD discs labeled “1” or “ALL”.
1
Notes on Regional Codes
• Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your DVD/CD receiver’s
regional code or the disc cannot play.
• If you try to play a DVD with a different region code
from your receiver, the message “Check Regional
Code” appears on the TV screen.
Notes on DVDs
Some playback operations of DVDs may be
intentionally programmed by software manufacturers.
This unit plays DVDs according to disc content
designed by the software manufacturer, therefore
some playback features may not be available or other
functions may be added.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories. Confidential
Unpublished works. Copyright 1992-1997 Dolby
Laboratories. All rights reserved.
Manufactured under license from Digital Theater
Systems, Inc. US Pat. No’s. 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535 and other US and
world-wide patents issued and pending. “DTS” and
“DTS Digital Surround” are registered trademarks of
Digital Theater Systems, Inc. Copyright 1996, 2003
Digital Theater Systems, Inc. All rights reserved.
6
Disc-related terms
MPEG
MPEG is an international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital, DTS and MPEG
audio.
MP3
MP3 is a popular compression format used for digital
audio files that yields very high near-CD quality.
WMA
Windows media audio file. A type of coding / decoding
developed by Microsoft Corp.
JPEG
Joint Pictures Expert Group. JPEG is a compressed
file format that allows you to save images with no limit
on the number of colors.
Title (DVD video discs only)
A title is generally a distinct section of a DVD disc. For
example the main feature could be title 1, a
documentary describing how the film was made could
be title 2, and cast interviews could be title 3. Each
title is assigned a reference number enabling you to
locate it easily.
Introduction
DVD ±R / DVD ±RW
DVD -R and DVD +R are two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc only
once. DVD +RW and DVD -RW are two standards for
re-writable media, meaning the DVD content can be
erased and re-recorded. Single-sided discs can hold
4.38 Gigabytes and double-sided discs hold twice as
much. There are no dual layer single sided recordable
discs.
Chapter (DVD video discs only)
A chapter is a segment of a title such as a scene in a
film or one interview in a series. Each chapter is
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters
may not be recorded.
Group (DVD audio discs only)
The main audio content or accompanying feature
content or additional feature content, or music
album.Each group is assigned a group reference
number enabling you to locate it easily.
Track
A distinct element of audiovisual information, such as
the picture or sound track for a specific language
(DVD), or a musical piece on a video or audio CD.
Each track is assigned a track number, enabling you
to locate the track you want. DVD discs allow one
track of video (with multiple angles) and several tracks
of audio.
7
Front Panel
STANDBY/ON
PHONES connector
STANDBY indicator
Lights red when the receiver is in
Standby mode (off).
DISC Tray
FUNCTION/PLAY
VOLUME controller
DISPLAY Window
Remote sensor
Press and hold down this button
about 3 seconds, then press
repeatedly to select other function.
MONO/STEREO/
PAUSE/STEP
MEMORY/STOP
OPEN/CLOSE
TUNING (-/+)/SKIP/SCAN
AV2 AUDIO Input (L/R)/VIDEO Input
Display Window
Programmed
playback active
SLEEP
indicator
Indicates current
surround mode
Indicates current
audio stream
MUTE indicator
TUNED indicator
Indicates current
player function:
Playback, Pause, etc.
STEREO
indicator
Repeat playback
mode indicators
DIGITAL PCM
PL II
SLEEP
MUTE
REPEAT
TITLE
CHP/TRK
ALL
A
B PROGRAM
TUNED ST.
DVD
CD
MP3
ANGLE active
Speaker
indicators
Indicates current
disc type
8
Indicates current
chapter or track
number
Indicates current
title number
Total playing time/Elapsed time/
Frequency/Sleep time/Surround
mode/Volume etc. indicators
Remote Control
POWER
OPEN/CLOSE
Introduction
FUNCTION SELECTOR
You can also select the desired
function with the FUNC./PLAY
on the front panel.
NUMBER
PRO LOGIC II (p. 17)
AUDIO (p. 25)
SOUND (p. 17)
SETUP (p. 19)
ARROW
For use in highlighting a
selection on a GUI menu
screen, TITLE and MENU
screen.
MENU (p. 25)
Use the MENU button to
display the menu screen
included on DVD video
discs.
SLEEP (p. 35)
SUBTITLE (p. 25)
RETURN (p. 23, 30)
DISPLAY (p. 18)
ENTER
TITLE (p. 25)
Use the TITLE button to
display the title screen included
on DVD video discs.
Q / R)
SLOW SCAN (Q
(p. 24)
VOLUME (+/-)
PRESET(+/-) (p. 34)
STOP
PAUSE/STEP
PLAY
MARKER(p.
SEARCH (p.
ANGLE (p.
ZOOM (p.
25)
25)
25)
25)
SKIP/SCAN (
/
) (p. 23)
MUTE (p. 35)
PROGRAM (p. 29)
CLEAR (p. 24)
REPEAT (p. 24, 28)
REPEAT A-B (p. 24, 28)
DIMMER (p. 35)
REMOTE CONTROL OPERATION RANGE
Point the remote control at the remote sensor and
press the buttons.
Distance: About 20 ft (6 m) from the front of the
remote sensor
Angle: About 30° in each direction in front of the
remote sensor
REMOTE CONTROL BATTERY INSTALLATION
Remove the battery cover on the rear
of the remote control, and insert two
R03 (size AAA) batteries with
and
aligned correctly.
Caution
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
9
Rear Panel
POWER CORD
SPEAKER Connectors
COAXIAL DIGITAL IN Connector
AV1 AUDIO Input (L/R)/VIDEO IN Connectors
FM Antenna
Connector
6
6
4
6
6
6
OPTICAL IN Connector
S-VIDEO OUT Connector
MONITOR VIDEO OUT Connector
COMPONENT VIDEO OUT Connectors
Connect to a TV with Y Pb Pr
inputs.
AM Loop Antenna
Connectors
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may
cause permanent damage to the unit.
10
Installation and Setup
TV Connections
Tips:
Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the DVD/CD Receiver. Use one of the connections
described below.
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
Caution
– Make sure the DVD/CD Receiver is connected directly
to the TV. Select the correct AV input on your TV.
– Do not connect your DVD/CD Receiver to TV via your
VCR. The DVD image could be distorted by the copy
protection system.
S-Video connection
Connect the S-VIDEO OUT jack on the DVD/CD
Receiver to the S-VIDEO IN jack on the TV using the
S-Video cable (S).
Progressive Scan (ColorStream® pro) connection
Introduction
Make one of the following connections, depending on
the capabilities of your existing equipment.
If your television is a high-definition or “digital ready”
television, you may take advantage of the DVD/CD
Receiver’s progressive scan output for the highest
video resolution possible.
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
Progressive Scan on the DVD/CD Receiver.
Notes:
• Set the Progressive to “On” on the setup menu for
progressive signal, see page 19.
• Set the progressive to “Off” by removing any disc from
the unit and close the disc tray. see that “no disc” is
displayed on the display window. Then press STOP
and hold it for five seconds before releasing it.
• Progressive scan does not work with the analog video
connections (yellow VIDEO OUT jack).
Rear of TV
S-VIDEO
INPUT
VIDEO
INPUT
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
Video connection
Connect the MONITOR OUT jack from the DVD/CD
Receiver to the VIDEO IN jack on the TV using the
video cable supplied (V).
Y
L
Pb
Pr
Component Video (Color Stream®) connection
Connect the COMPONENT VIDEO OUT jacks from the
DVD/CD Receiver to the corresponding in jacks on the
TV using an Y Pb Pr cable (C).
S
V
C
11
Audio Connection to Optional Equipment
Connect the DVD/CD receiver to your optional equipment for audio output.
1. Connect a VCR to the AV1 connectors.
2. Connect a additional VCR to the AV2 connectors.
3. Connect an optical output of DVD/CD receiver (or Digital Device etc) to the OPTICAL IN connector.
4. Connect an coaxial output of DVD/CD receiver (or Digital Device etc) to the COAXIAL IN connector.
VCR
OUT
Additional VCR
IN
IN
VIDEO
VIDEO
AUDIO (L)
AUDIO (L)
AUDIO (R)
AUDIO (R)
OUT
To AUDIO OUT (L/R)/
VIDEO OUT
To AUDIO OUT (L/R)/
VIDEO OUT
To AUDIO IN (L/R)/
VIDEO IN (AV1)
3
6
6
6
To AUDIO IN (L/R)/
VIDEO IN (AV2)
OPTICAL
OUT
DVD Player (or Digital Device, etc)
Note:
If the audio format of the digital output does not match the capabilities of your DVD/CD Receiver, the receiver
will produce a strong, distorted sound or no sound at all.
12
Antenna Connections
Installation and Setup
Connect the supplied FM/AM antenna for listening to the radio.
Connect the AM Loop antenna to the AM antenna connector.
Connect he FM Wire antenna to the FM antenna connector.
Notes:
To prevent noise pickup, keep the AM Loop antenna away from the DVD/CD receiver and other components.
Be sure to fully extend the FM wire antenna.
After connecting the FM Wire antenna, keep it as horizontal as possible.
13
Assembling and Connecting to the Speakers
The front and rear speakers are detached from the speaker stands. Connect the speaker cords and assemble
the front and rear speakers from speaker stands as illustrated.
How to connect the Speakers
Connect the speaker cords to the appropriate
terminals on the bottom of each front and rear
speaker.
After connecting the speaker cords to the appropriate
terminals on the bottom of each front and rear
speaker and attach the front and rear speakers to
the speaker stands.
To attach the speaker to the stand
14
To detach the speaker from the stand
Speaker System Connection
Connect the speakers using the supplied speaker cords.
Installation and Setup
To obtain the best possible surround sound, adjust the speaker parameters (volume, distance, etc.).
Notes:
Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cables are
reversed, the sound will be distorted and will lack base.
If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the
speakers.
About Ferrite Core
Be sure to attach the ferrite core to the speaker cables
(for connecting to this unit).
This ferrite core can reduce noises.
How to attach the ferrite core
1
2
3
Press the stopper [a] of the ferrite core to open.
Wind the Subwoofer cable once on the ferrite core.
Close the ferrite core unitl it clicks.
Note:
Attach the ferrite core near the unit (Refer to the fig.3 and
comment.).
The length here is
short as much as
possible.
15
Speaker Positioning
In the case of normal position use the 6 speakers (2 front speakers, 1 center speaker, 2 rear speakers and
subwoofer).
If you want to play the excellent bass sound, DTS digital surround or Dolby Digital surround, you should connect
a subwoofer.
• Front speakers
According to your listening position set up the speakers for equal distance. And by hearing position set up the
interval between speakers to 45 degree.
• Center speaker
The center speakers and front speakers are ideally the same height. But normally place it above or below the
television.
• Rear speakers
Place left and right behind the listening area. These speakers recreate sound motion and atmosphere required
for surround sound playback. For best results, do not install the rear speakers too far behind the listening
position and install them at or above the level of the listener’s ears. It is also effective to direct the rear
speakers towards a wall or ceiling to further disperse the sound.
In the case of a smaller room size, if the audience is near to the rear wall set the rear speakers opposite each
other, and set the rear speakers above 60 - 90 cm than the listener’s ears.
• Subwoofer
This can be placed in any front position.
Subwoofer
Center Speaker
Front Speaker
(Left)
Front Speaker
(Right)
Rear Speaker
(Left)
Rear Speaker
(Right)
Speaker Positioning Example
16
Allows you to enjoy 5.1(or 6) discrete channels of high quality
digital audio from DTS program sources such as discs, DVD
and compact discs, etc.bearing the trademark. DTS Digital
Surround delivers up to 6 channels of transparent audio(which
means identical to the original masters) and results in
exceptional clarity throughout a true 360 degree sound field.
The term DTS is a trademark of DTS Technology, LLC.
Manufactured under license from DTS Technology, LLC.
The Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital
program source. If you play DVDs with “
” mark, you can
enjoy even better sound quality, greater spatial accuracy, and
improved dynamic range.
Use this mode when playing movie or Dolby Digital 2 channel
which carries the “
” mark. This mode provides the effect
of being in a movie theatre or live concert house-an effect with
an intensity which can only be obtained through DOLBY PRO
LOGIC SURROUND. The effect of the front/back/left/right
movement of the sound image, as well as the sense of fixed
position in the sound image, is much clearer and more dynamic
than before.
(II)
Dolby Pro Logic II creates five full-bandwidth output channels
from two-channel sources. This is done using an advanced,
high-purity matrix surround decoder that extracts the spatial
properties of the original recording without adding any new
sounds or tonal colorations.
MOVIE mode:
The Movie mode is for use with stereo television shows and all
programs encoded in Dolby Surround. The result is enhanced
soundfield directionality that approaches the quality of discrete
5.1-channel sound.
MUSIC mode:
The Music mode is for use with any stereo music recordings.
MATRIX mode:
The Matrix mode is the same as the Music mode except that the
directional enhancement logic is turned off. It may be used to
enhance mono signals by making them seem “larger.” The
Matrix mode may also find use in auto systems, where the
fluctuations from poor FM stereo reception can otherwise cause
disturbing surround signals from a logic decoder. The ultimate
“cure” for poor FM stereo reception may be simply to force the
audio to mono.
3D SURROUND
This unit can produce a 3D Surround effect, using 3D Surround
Sound technology, which simulates multi-channel audio
playback from two conventional stereo speakers instead of the
five or more speakers normally required to listen to multichannel audio from a home theatre. This feature works with
DVD discs encoded with Dolby Pro Logic and Dolby Digital
audio tracks.
Sound Mode
You can enjoy surround sound simply by selecting one
of the pre-programmed sound fields according to the
program you want to listen to.
A) By pressing SOUND button
Each time you press SOUND button, the sound mode is
changed in the following order;
PRO LOGIC → PLII MOVIE → PLII MUSIC →
PLII MATRIX → ROCK → POP → LIVE → DANCE →
TECHNO → CLASSIC → SOFT → 3D SURROUND →
BYPASS ...
(This function available 2-channel mode only)
Installation and Setup
Mini Glossary for Audio Stream &
Surround Mode
Tips:
ROCK: Reproduces the acoustics of rock music.
POP: Reproduces the acoustics of pop music.
LIVE: Reproduces the acoustics of a 300-seat live.
DANCE: Reproduces the acoustics of dance music.
TECHNO: Reproduces the acoustics of techno
music.
CLASSIC: Reproduces the acoustics of orchestral
music.
SOFT: Ideal for soft acoustic sounds.
B) By pressing
PL II button
Each time you press
PL II button, the sound mode
is changed in the following order;
PRO LOGIC → PLII MOVIE → PLII MUSIC →
PLII MATRIX → BYPASS ...
(This function available 2-channel mode only)
When DVD is inserted.
You can change the sound mode of DVD (Dolby Digital, DTS,
PRO LOGIC, etc) by pressing the AUDIO button on the remote
during playback.
Although the DVD contents differ from disc to disc, the
following explains the basic operation when this feature is
used.
Each time you press AUDIO button, the sound mode of DVD is
changed in the following order;
→
→
→
For your reference
• The DVD/CD receiver memorizes the last mode
settings for each source individually.
• You can identify the encoding format of program
software by looking at its packaging.
- Dolby Digital discs are labeled with the
logo.
- Dolby Surround encoded programs are labeled with
the
logo.
- DTS Digital Surround discs are marked with DTS.
BYPASS
Software with multichannel surround audio signals is played
according to the way it was recorded.
Note:
Sound Mode is not applicable when headphones are used.
17
On-Screen Display
You can display the general playback status on the TV
screen. Some items can be changed using the menu.
To use the on-screen display:
Example: On-Screen Display during
playing DVD Video
Items
Selection Method
Title Number
1/3
b / B, Numbers
ENTER
1 / 12
b / B, Numbers
ENTER
1. Press DISPLAY during playback.
2. Press v / V to select an item.
The selected item is highlighted.
3. Press b / B to change the setting. You can also
use the number buttons if appropriate (e.g.
inputting the title number). For some functions,
press ENTER to execute the setting.
Chapter Number
Time search
Subtitle language
Notes:
• Some discs may not provide all of the features
0:20:09
Audio language
and Digital Audio
Output mode
b / B or
AUDIO
ABC
1 ENG
Angle
1/3
shown below.
b / B or
SUBTITLE
b / B or
ANGLE
• If no button is pressed for 10 seconds, the onscreen display disappears.
Sound
PLAYBACK STATUS/RESTRICTIONS
Title
Repeat title
Example: On-Screen Display during
playing DVD Audio
A-B
1/9
MARKER SEARCH
3D SUR
b/B
Repeat sequence
Items
Enter a Marker
Group Number
b / B, Numbers
ENTER
Track Number
b / B, Numbers
ENTER
Marker Search menu
Resume play from this point
Action prohibited or not available
Selection Method
Time search
0:20:09
Audio language
and Digital Audio
Output mode
Subtitle language
Display only
b / B or
AUDIO
OFF
ABC
Page (or Angle)
Display only
b / B or
ANGLE
or
1/3
18
Numbers, ENTER
Initial Settings
DISPLAY
DISPLAY
TV Aspect
16 : 9
Display Mode
Widescreen
Progressive Scan
Off
To display and exit the Menu:
Press SETUP to display the menu. A second press of
SETUP will take you back to initial screen.
To go to the next level:
Press B on the Remote Control.
Move
TV Aspect
DVD-V
16:9 Wide: Select when a 16:9 wide TV is connected.
GENERAL OPERATION
Display Mode
1. Press SETUP. The Setup menu appears.
2. Use v / V to select the desired option then press
B to move to the second level. The screen shows
the current setting for the selected item, as well as
alternate setting(s).
3. Use v / V to select the second desired option then
press B to move to the third level.
4. Use v / V to select the desired setting then press
ENTER to confirm your selection. Some items
require additional steps.
5. Press SETUP or PLAY to exit the Setup menu.
LANGUAGE
LANGUAGE
English
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
Move
DVD-A
4:3: Select when a standard 4:3 TV is connected.
To go back to the previous level:
Press b on the Remote Control.
Menu Language
Select
Installation and Setup
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 19 to 22.
DVD-V
DVD-A
Display Mode setting works only when the TV Aspect
mode is set to “4:3”.
Letterbox: Displays a wide picture with bands on the
upper and lower portions of the screen.
Panscan: Automatically displays the wide picture on the
entire screen and cuts off the portions that do not fit.
Progressive Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with
a progressive scan signal, set Progressive Scan to
On.
To Turn ON progressive scan:
Connect component out of the DVD to the input of
your monitor/television, set your television or monitor
to Component Input.
Select
1. Select “Progressive Scan” on the DISPLAY menu
then press B.
Menu Language
Select a language for the Setup menu and on-screen
display.
DISPLAY
TV Aspect
Display Mode
Progressive Scan
Disc Audio / Subtitle / Menu
DVD-V
On
DVD-A
Off
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
Original: Refers to the original language in which the
disc was recorded.
Other: To select another language, press number
buttons then ENTER to enter the corresponding 4digit number according to the language code list in the
reference chapter. If you enter the wrong language
code, press CLEAR.
Prev.
Move
Enter
2. Select “On” using the v / V buttons.
3. Press ENTER to confirm your selection.
The confirm menu will appear.
19
Note:
• If your TV does not accept the Progressive
Scan format, the picture will appear scrambled if
you try Progressive Scan on the DVD/CD receiver.
AUDIO
Each DVD disc has a variety of audio output options.
Set the receiver’s AUDIO options according to the
type of audio system you use.
AUDIO
4. When the confirm menu appears on your screen
Cancel is highlighted as default. Use the b / B
buttons to highlight Enter.
5.1 Speaker Setup
Select
DRC
On
Vocal
On
5. Pressing ENTER will set the receiver to
Progressive scan mode.
Caution:
Once the setting for progressive scan output is
entered, an image will only be visible on a progressive
scan compatible TV or monitor. If you set Progressive
Scan to On in error, you must reset the unit. First,
remove the disc in the DVD/CD receiver. Next, press
STOP ( x ) and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting, and a picture will once again be
visible on a conventional analog TV or monitor.
Move
Select
DVD-A
5.1 Speaker Setup DVD-V
Select speaker settings, including volume balance and
distance, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See “5.1 Speaker Setup”, page 33.)
Dynamic Range Control (DRC)
DVD-V
DVD-A
With the DVD*1 format, you can hear a program’s
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
Then, you may listen to a movie at a lower volume
without losing clarity of sound. Set DRC to On for this
effect.
*1: Dolby Digital only
Vocal
DVD-V
Set Vocal to On only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
20
LOCK (Parental Control)
Password (Security Code)
You can enter or change password.
LOCK
Rating
Unlock
Password
New
Country Code
U
SES
1. Select Password on the LOCK menu then press B.
2. Follow step 2 as shown left (Rating). “Change” or
“New” is highlighted.
3. Enter the new 4-digit code, then press ENTER.
Input it again to verify.
Rating
Select
DVD-V
4. Press SETUP to exit the menu.
Some movies contain scenes that may not be suitable
for children to view. Many of these discs contain
parental control information that applies to the
complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the
country. Some discs offer more suitable scenes as an
alternative.
If you forget your Security Code
The parental control feature allows you to block
access to scenes below the rating you input, thereby
preventing your children from being able to view
material you believe is unsuitable.
3. Enter a new code as described above.
1. Select “Rating” on the LOCK menu then
press B.
Enter the code of the country/area whose standards
were used to rate the DVD video disc, based on the
list in the reference chapter.
2. To access the Rating, Password and Country Code
features, you must input the 4-digit security code
you created. If you have not yet entered a security
code you are prompted to do so.
Input a 4-digit code and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
3. Select a rating from 1 to 8 using the v / V buttons.
Rating 1-8: Rating one (1) has the most
restrictions and rating eight (8) is the least
restrictive.
Installation and Setup
Move
If you forget your security code you can clear it using
the following steps:
1. Press SETUP to display the Setup menu.
2. Input the 6-digit number “210499” and the security
code is cleared.
Country Code
DVD-V
1. Select “Country Code” on the LOCK menu then
press B.
2. Follow step 2 as shown left (Rating).
3. Select the first character using v / V buttons.
4. Press ENTER and select the second character
using v / V buttons.
5. Press ENTER to confirm your country code
selection.
Unlock
If you select unlock, parental control is not active
and the disc plays in full.
Notes:
If you set a rating for the receiver, all disc scenes with
the same rating or lower are played. Higher rated
scenes are not played unless an alternate scene is
available on the disc. The alternative must have the
same rating or a lower one. If no suitable alternative is
found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
the disc.
4. Press ENTER to confirm your rating selection, then
press SETUP to exit the menu.
21
OTHERS
The Auto Play and B.L.E. settings can be changed.
To select the black level of playback pictures. Set your
preference and monitor’s ability.
OTHERS
Auto Play
Off
B.L.E.
On
On: Expanded grey scale. (0 IRE cut off)
Off: Standard grey scale. (7.5 IRE cut off)
Move
Auto Play
Select
DVD-V
You can set up the DVD/CD receiver so a DVD disc
automatically starts playing whenever the DVD is
inserted.
If Auto Play mode is set to On, this DVD/CD receiver
will search for title that has the longest playback time
and then play back the title automatically.
On: Auto Play function is active.
Off: Auto Play function is not active.
Note:
• The Auto Play function may not work for some
DVDs.
22
B.L.E. (Black Level Expansion)
Operation
PLAYBACK SETUP
1. Turn on the TV and select the video input source
connected to the DVD/CD receiver.
General Features
Note:
• Unless stated otherwise, all operations described
use the remote control. Some features may also be
available on the Setup menu.
2. Turn on the audio system (if applicable) and select
the input source connected to the DVD/CD
receiver.
MOVING TO ANOTHER TITLE/GROUP
3. Press OPEN/CLOSE to open the disc tray and
load your chosen disc in the tray, with the
playback side down.
When a disc has more than one title/group, you can
move to another title/group. Press DISPLAY while
playback is stopped then the appropriate number (0-9)
or use b / B to move to another title/group.
You can play any title by inputting its number while
playback is stopped.
4. Press OPEN/CLOSE to close the tray. Playback
starts automatically. If playback does not start,
press PLAY.
In some cases, the disc menu might appear
instead:
DVD-V
MOVING TO ANOTHER CHAPTER/TRACK
DVD-V
DVD-V
Use the b B v V buttons to select the title/chapter
you want to view, then press ENTER to start.
Press TITLE or MENU to return to the menu
screen.
Notes:
• If parental control is set and the disc is not within
the rating settings you must input the password.
(See “Lock Menu” on page 21).
• DVDs may have a region code. Your receiver does
not play discs that have a region code different from
your receiver. The region code for this receiver is 1
(one).
DVD-A
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to
another chapter/track as follows:
•
DVD-A
Use the 1 2 3 4 buttons to select an option you
want, then press ENTER to view the option.
DVD-A
•
•
Press SKIP . or > briefly during playback to
select the next chapter/track or to return to the
beginning of the current chapter/track.
Press SKIP . twice briefly to step back to the
previous chapter/track.
To go directly to any chapter during DVD playback,
press DISPLAY and press v / V to select the
chapter/track icon. Then, input the chapter/track
number or use b / B.
SEARCH
DVD-V
Operation
Playing a DVD
DVD-A
1. Press and hold SKIP/SCAN . or > for about
two seconds during playback.
The receiver will now go into SEARCH mode.
2. Press and hold SKIP/SCAN . or >
repeatedly to select the required speed:
X2, X4, X16 or X100
3. To exit SEARCH mode, press PLAY.
Note:
• When using a DVD audio disc that includes
pictures, this operation may be permitted in some
picture segments.
23
Still Picture and Frame-by-Frame
Playback
DVD-V
DVD-A
1. Press PAUSE/STEP on the remote control during
playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly.
2. To exit still motion mode, press PLAY.
Note:
When using a DVD audio disc that includes pictures,
this operation may be permitted in some picture
segments.
SLOW SCAN
DVD-V
DVD-A
1. Press SLOW SCAN - m or M + during
playback.
The DVD/CD Receiver will enter SLOW mode.
REPEAT
DVD-V
DVD-A
You can play a title/chapter/all/track/group on a disc.
Press REPEAT during playback to select a desired
repeat mode.
DVD Video Discs - Repeat Chapter/Title/Off
• Chapter: repeats the current chapter.
• Title: repeats the current title.
• Off : does not play repeatedly.
DVD Audio Discs - Repeat Track/Group/Off
• Track: repeats the current track.
• Group: repeats the current Group.
• Off : does not play repeatedly.
Note:
• If you press SKIP (>) once during Repeat Chapter
(Track) playback, the repeat playback cancels.
3D SURROUND
DVD-V
2. Use the SLOW SCAN - m or M + to select the
required speed: t 1/16, t 1/8, t 1/4, or t 1/2
(backward), or T 1/16, T 1/8, T 1/4, or T 1/2
(forward).
To produce a 3D surround effect that simulates multichannel audio from two stereo speakers (instead of
the five+ speakers normally required for multi-channel
audio from a home theater system).
3. To exit Slow Motion mode, press PLAY (N).
1. Press DISPLAY during playback.
Note:
• When using a DVD audio disc that includes pictures,
this operation may be permitted in some picture
segments.
REPEAT A-B
DVD-V
2. Use 3 or 4 to select the sound option.
The sound option will be highlighted.
3. Use 1 or 2 to to select “3D SUR”.
To turn off the 3D Surround effect, select “Normal”.
DVD-A
To repeat a sequence.
1. Press A-B at your chosen starting point. “ A * ”
appears briefly on the TV screen.
2. Press A-B again at your chosen end point.
“A B” appears briefly on the TV screen and the
repeat sequence begins.
3. Press A-B again to cancel.
TIME SEARCH
DVD-V
To start playing at any chosen time on the disc:
1. Press DISPLAY during playback. The time search
box shows the elapsed playing time.
2. Press v / V to select the time clock icon
and “-:--:--” appears.
3. Input the required start time in hours, minutes, and
seconds from left to right. If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
4. Press ENTER to confirm. Playback starts from the
selected time.
24
ZOOM
DVD-V
Special DVD Features
DVD-A
Use zoom to enlarge the video image.
1. Press ZOOM during playback or still playback to
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
2. Each press of the ZOOM button changes the TV
screen in the sequence: 100% size → 400% size
→ 1600% size → screen fit mode → 100% size
Screen fit mode:
You can change the way the image appears on
the screen when you’re playing a DVD movie.
4 to select between Normal, Enhanced,
Press 3/4
and Maximum.
3. Use the b B v V buttons to move through the
zoomed picture.
4. To resume normal playback, press CLEAR.
Notes:
CHECKING THE CONTENTS OF DVD
DISCS: MENUS
DVDs may offer menus that allow you to access
special features. To use the disc menu, press DVD
MENU. Input the corresponding number or use the
b B v V buttons to highlight your selection.
Then press ENTER.
TITLE MENU
DVD-V
1. Press TITLE. If the current title has a menu, the
menu appears on the screen. Otherwise, the disc
menu may appear.
2. The menu offers features such as camera angles,
spoken language and subtitle options, and
chapters for the title.
• Zoom may not work on some DVDs.
3. Press TITLE to exit.
• Screen fit mode is available for playing the DVD disc, VR
disc and movie file.
DISC MENU
MARKER SEARCH
DVD-V
DVD-A
DVD-V
DVD-A
Press MENU and the disc menu is displayed. Press
MENU again to exit.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH. The marker
search menu appears on the screen.
2. Within 10 seconds, press b / B to select a marker
number that you want to recall or clear.
3. Press ENTER and playback starts from the
marked scene. Or, Press CLEAR and the marker
number is erased from the list.
4. You can play any marker by inputting its number
on the marker search menu.
PAUSE
DVD-V
DVD-A
1. Press PAUSE/STEP during playback.
2. To return to playback, press PLAY.
CAMERA ANGLE
DVD-V
Operation
To enter a Marker
You can start playback from up to nine memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears on
the TV screen briefly. Repeat to enter up to nine
markers.
DVD-A
If the disc contains scenes recorded at different
camera angles, you can change to a different camera
angle during playback. Press ANGLE repeatedly
during playback to select a desired angle. Note that
the number of the current angle appears on the
display.
Tip:
The angle indicator will blink on the TV screen during scenes
recorded at different angles as an indication that angle
switching is possible.
CHANGING THE AUDIO LANGUAGE
DVD-V
DVD-A
Press AUDIO repeatedly during playback to hear a
different audio language or audio track.
With DVD-RW discs recorded in VR mode that have
both a main and a Bilingual audio channel, you can
switch between Main (L), Bilingual (R), or a mix of
both (Main + Bilingual) by pressing AUDIO.
SUBTITLES
DVD-V
Press S-TITLE repeatedly during playback to see the
different subtitle languages.
25
DVD Audio Discs
DVD Audio is a new disc format building on the
success of DVD to provide high quality,
uncompressed, multi-channel audio for a new
experience in audio quality. A DVD Audio disc can be
identified by the DVD audio logo on the disc jacket or
on the disc itself.
DVD Audio can provide higher quality stereo than
Audio CDs with a sampling rate of up to 192kHz
(compared to 44.1kHz for CDs). DVD Audio digital
sound can be delivered with up to 24 bits of data
(compared to 16 bits for a standard CD).
A typical DVD Audio disc contains up to seven times
the data capacity of a CD. This additional space is
used for music, either Advanced Resolution multichannel sound quality that is closer to the artist’s
master recording or for longer recordings. Many DVD
Audio discs contain on-screen text, such as artist
biographies, playlists, or lyrics. Some DVD Audio
discs contain photo galleries or video clips.
Note:
To enjoy maximum sound quality and surround effect
of DVD Audio, you must use 5.1 channel analog audio
output (5.1CH AUDIO OUT jacks on the DVD/CD
receiver). If you use the DIGITAL OUT (OPTICAL or
COAXIAL) for your audio connection, the sound will
only be similar to CD-quality sound even though
you’re playing a DVD Audio disc.
Moving to another GROUP
Some DVD Audio discs divide content into different
groups. Your player enables you to quickly access
different groups during playback via the on-screen
display.
1. Press DISPLAY during playback on in stop mode.
4 to select Group icon.
2. Press 3/4
3. Press 1/2 or the numbered buttons (0-9) to select
a group number.
Note:
Sometimes the author of the disc creates hidden
content that can only be accessed by entering a
password. If the lock icon appears on the TV screen,
enter the password (sometimes you’ll find it on the
disc’s jacket cover or on a web site). This password
control isn’t dictated by your DVD/CD receiver — it is
a function of the disc.
Since the authoring of DVD Audio Discs varies, some
of the on-screen display choices might not be
available for the disc you’re playing.
Viewing another PAGE
Since DVD Audio discs can hold a lot of content, there
are various ways to see what’s available on the disc.
1. Press DISPLAY during playback.
4 to select Page icon.
2. Press 3/4
3. Press 1/2 to select a page number.
What appears on the screen will vary from disc to
disc because the information available depends
upon the way the disc was created.
Note:
Since the authoring of DVD Audio Discs varies, some
of the on-screen display choices might not be
available for the disc you’re playing.
26
Playing an Audio CD or MP3/WMA
Disc
Audio CD
Once you insert an audio CD a menu appears on the
TV screen. Press v / V to select a track then press
PLAY or ENTER and playback starts.
AUDIO CD
0:52:07
1 / 12
List
Program
Track1
Track2
Track3
Track4
Track5
Track6
Track7
Clear All
Track8
PROGRAM Edit
MP3 / WMA
1. Press v / V to select a folder, and press ENTER
to see the folder contents.
2. Press v / V to select a track then press PLAY or
ENTER. Playback starts.
MUSIC
0:00:00
1 / 12
List
Program
1-Music1
2-Music2
3-Music3
4-Music4
5-Music5
6-Music6
Clear All
7-Music7
DISPLAY Info
PROGRAM Edit
ID3 TAG
• When playing a file containing information such as track
titles, you can see the information by pressing DISPLAY.
[ Title, Artist, Album, Year, Comment ]
• If there is no information, “NO ID3 TAG” appear on the
display.
MP3 / WMA disc compatibility with this receiver
is limited as follows:
• Sampling frequency: within 8 - 48 kHz (MP3),
within 32 - 48kHz (WMA)
• Bit rate: within 8 - 320kbps (MP3),
32 - 192kbps (WMA)
• The player cannot read an MP3/WMA file that has
a file extension other than “.mp3” / “.wma”.
• CD-R physical format should be ISO 9660
• If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
creates an ISO 9660 file system.
• File names should have a maximum of 8 letters
and must incorporate an .mp3 or .wma extension.
• They should not contain special letters such as /
? * : “ < > l etc.
• The total number of files on the disc should be
less than 650.
This DVD/CD receiver requires discs and recordings
to meet certain technical standards in order to
achieve optimal playback quality. Pre-recorded
DVDs are automatically set to these standards.
There are many different types of recordable disc
formats (including CD-R containing MP3 or WMA
files) and these require certain pre-existing
conditions (see above) to ensure compatible
playback.
Operation
The DVD/CD receiver can play MP3/WMA formatted
recordings on CD-ROM, CD-R, or CD-RW discs.
Customers should note that permission is
required in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
should always be sought from the copyright
owner.
Tip:
• If you are in a file list on the MUSIC menu and want to
return to the Folder list, use the v / V to highlight
press ENTER.
and
• Press MENU to move to the next page.
• On a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word on top of the menu is highlighted.
27
Audio CD and MP3 / WMA Disc
Features
PAUSE
CD
MP3
WMA
1. Press PAUSE/STEP during playback.
2. To return to playback, press PLAY, ENTER or
press PAUSE/STEP again.
MOVING TO ANOTHER TRACK
MP3
CD
CD
1. To repeat a sequence during disc playback press
A-B at your chosen starting point. The Repeat icon
and “A” appear on the menu screen.
2. Press A-B again at your chosen end point. The
Repeat icon and “A-B” appear on the menu
screen, and the sequence begins to play
repeatedly.
3. To exit the sequence and return to normal play,
press A-B again. The Repeat icon disappears from
the menu screen.
WMA
1. Press SKIP (. or >) briefly during playback
to go to the next track or to return to the beginning
of the current track.
2. Press SKIP . twice briefly to go back to the
previous track.
3D SURROUND
CD
To produce a 3D surround effect that simulates multichannel audio from two stereo speakers (instead of
the five+ speakers normally required for multi-channel
audio from a home theater system).
3. You can play any track by inputting its number.
1. Press AUDIO during playback.
“3D SUR.” appears on the menu screen.
REPEAT TRACK/ALL/OFF
2. To return to normal playback, press AUDIO
repeatedly until “3D SUR.” disappears from the
menu screen.
CD
MP3
WMA
You can play a track/all on a disc.
1. Press REPEAT when playing a disc. The repeat
icon appears.
2. Press REPEAT to select a desired repeat mode.
• Track: repeats the current track
• All: repeats all the tracks on a disc.
• Off(No display): does not play repeatedly.
Note:
If you press SKIP (>) once during Repeat Track playback,
the repeat playback cancels.
SEARCH
CD
MP3
WMA
1. Press SCAN (m or M) during playback.
2. Press SCAN (m or M) repeatedly to select the
required speed: X2, X4, X8 backward or forward.
3. To exit SEARCH mode, press PLAY.
28
REPEAT A-B
Programmed Playback
REPEAT PROGRAMMED TRACKS
The program function enables you to store your
favorite tracks from any disc in the receiver memory. A
program can contain 30 tracks.
1. Insert a disc.
Audio CD or MP3/WMA Discs:
AUDIO CD or MUSIC menu appears.
2. Press PROGRAM.
The E mark will appear to the right of the word
“Program” on the right side of the menu screen.
Note:
Press PROGRAM again, then the
E
mark will disappear
to exit the Program Edit mode.
MUSIC
AUDIO CD
0:00:00
1 / 12
List
Program
E
1 / 12
List
Program
Track1
Track5
Track2
Track7
1-Music1
4-Music4
Track3
Track4
2-Music2
6-Music6
Track4
Track1
3-Music3
1-Music1
E
2. Press REPEAT to select a desired repeat mode.
• Track: repeats the current track
• All: repeats all the tracks on programmed list.
• Off(No display): does not play repeatedly.
Note:
If you press > once during Repeat Track playback, the
repeat playback cancels.
ERASING A TRACK FROM “PROGRAM”
LIST
1. Use v V B to select the track that you wish to
erase from the Program list.
2-Music2
Track5
4-Music4
Track6
5-Music5
2. Press CLEAR. Repeat to erase additional tracks
on the list.
6-Music6
Track7
Clear All
Track8
PROGRAM Edit
Audio CD Menu
Clear All
7-Music7
DISPLAY Info
PROGRAM Edit
MP3/WMA Menu
3. Select a track on the “List”, then press ENTER to
place the selected track on the “Program” list.
Repeat to place additional tracks on the list.
4. Press B.
Select the track you want to start playing on the
“Program” list.
ERASING THE COMPLETE PROGRAM
LIST
1. Press B to move to the “Program” list.
Operation
0:52:07
1. Press REPEAT when playing a disc. The repeat
icon appears.
2. Use v / V to select “Clear All”, then press ENTER.
Note:
The programs are also cleared when the disc is removed.
5. Press PLAY or ENTER to start. Playback begins in
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
“Program” list have played once.
6. To resume normal playback from programmed
playback, select a track of AUDIO CD (or MUSIC)
list and then press PLAY.
29
Viewing a JPEG Disc
ZOOM
Using this DVD/CD receiver you can view discs with
JPEG files.
Use zoom to enlarge the photo image.
(see page 25)
1. Insert a disc and close the tray. The PHOTO menu
appears on the TV screen.
TO ROTATE PICTURE
JPEG
JPEG
Press v / V during showing a picture to rotate the
picture clockwise or counter clockwise.
PHOTO
Preview
List
TO LISTEN TO MP3/WMA MUSIC
WATCHING PICTURE JPEG
JPEG Folder 1
JPEG Folder 2
JPEG Folder 3
JPEG Folder 4
JPEG Folder 5
JPEG Folder 6
JPEG Folder 7
You can display files while listening to MP3/WMA
music files recorded on the same disc.
JPEG Folder 8
2. Press v / V to select a folder, and press ENTER.
A list of files in the folder appears.
If you are in a file list and want to return to the
previous Folder list, use the v / V buttons on the
remote to highlight
and press ENTER.
3. If you want to view a particular file, press
v / V to highlight a file and press ENTER or PLAY.
Viewing the file proceeding starts.
While viewing a file, you can press STOP to move
to the previous menu (PHOTO menu).
Tips:
1. Insert the disc containing the two types of file in
the player.
2. Press TITLE to display PHOTO menu.
3. Press v / V to select a photo file.
4. Use B to select
icon then press ENTER.
Playback starts. The playback will continue until
STOP is pressed.
Tip:
To listen to only the desired music watching picture,
programmed the desired tracks from the “MUSIC”
menu and then proceed as above.
• Press MENU to move to the next page.
• There are three Slide Speed options
:
>>> (Fast), >> (Normal), and > (Slow).
Use v V b B to highlight the Speed. Then, use b / B to
select the option you want to use then press ENTER.
• On a disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word on top of the menu is highlighted.
• Press RETURN, information of file is hidden.
SLIDE SHOW
JPEG
Use v V b B to highlight the
press ENTER.
STILL PICTURE
(Slide Show) then
1. Press PAUSE/STEP during slide show.
The player will now go into PAUSE mode.
2. To return to the slide show, press PLAY or press
PAUSE/STEP again.
JPEG
Press SKIP (. or >) or cursor (b or B) once
while viewing a picture to advance to the next or
previous file.
30
• Depending upon the size and number of JPEG
files, it could take a long time for the DVD/CD
receiver to read the disc’s contents. If you don’t
see an on-screen display after several minutes,
some of the files may be too large — reduce the
resolution of the JPEG files to less than 2M pixels
as 2760 x 2048 pixels and burn another disc.
• The total number of files and folders on the disc
should be less than 650.
• Some discs may be incompatible due to a
different recording format or the condition of disc.
JPEG
MOVING TO ANOTHER FILE
JPEG disc compatibility with this receiver is
limited as follows:
• Ensure that all the selected files have the “.jpg”
extensions when copying into the CD layout.
• If the files have “.jpe” or “.jpeg” extensions,
please rename them as “.jpg” file.
• File names without “.jpg” extension will not be
able to be read by this DVD/CD receiver. Even
though the files are shown as JPEG image files in
Windows Explorer.
Playing a DVD VR format Disc
Maintenance and Service
This unit will play DVD-R/RW discs recorded using
the DVD-Video format that have been finalized using
a DVD-recorder.
Refer to the information in this chapter before
contacting a service technician.
• This unit will play DVD-RW discs recorded using
the Video Recording (VR) format.
1. Insert a disc and close the tray. The DVD-VR
menu appears on the TV screen.
DVD-VR
HANDLING THE UNIT
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
Keeping the exterior surfaces clean
Notes:
• Unfinalized DVD-R/RW discs cannot be played in this
player.
• Some DVD-VR disc are made with CPRM data by DVD
RECORDER. Player does not support these kinds of discs
and display the “CHECK DISC”.
What is ‘CPRM’?
CPRM is a copy protection system (with scramble system)
only allowing the recording of ‘copy once’ broadcast
programs. CPRM stands for Content Protection for
Recordable Media.
This player is CPRM compatible, which means that you
can record copy-once broadcast programs, but you cannot
then make a copy of those recordings. CPRM recordings
can only be made on DVD-RW discs formatted in VR
mode, and CPRM recordings can only be played on
players that are specifically compatible with CPRM.
Do not use volatile liquids such as insecticide
spray near the unit.
•
Do not leave rubber or plastic products in contact
with the unit for a long period of time. since they
leave marks on the surface.
Cleaning the unit
To clean the receiver, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution.
Operation
2. Press v / V to select a track then press PLAY or
ENTER and playback starts.
•
Do not use strong solvents such as alcohol, benzine,
or thinner, as these might damage the surface of the
unit.
Maintaining the Unit
The DVD/CD receiver is a high-tech, precision device.
If the optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of use.
For details, please contact your nearest authorized
service center.
31
Additional Features
VIDEO MODE SETTING
The video mode setting only works when the
Progressive Scan mode is set to “On” in the Setup
menu.
• With certain discs, the playback picture may be
flickering or Dot Crawl is shown on straight lines.
That means Vertical interpolation or De-interlace is
not perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
• To change the video mode, press and hold
DISPLAY about 3 seconds during disc playback.
The new video mode number selected is displayed
on the TV screen. Check whether the video quality
has improved. If not, repeat the above procedure
until picture quality is improved.
• Video mode change sequence:
MODE1 → MODE2 → MODE3 → MODE1
• If you turn off the power, the video mode will be
back to initial state (MODE1).
32
Tip:
Detailed Descriptions for Video Modes
MODE1: The source material of the DVD video (film material
or video material) is determined from disc information.
MODE2: Suitable for playing film based content or video
based material recorded by the progressive scan method.
MODE3: Suitable for playing video based content with
comparatively little motion.
5.1 Speaker Setup
Speaker Setup
Make the following settings for the built-in 5.1 channel
surround decoder.
1. Press SETUP. The setup menu appears.
2. Use v / V to select the AUDIO option then press
B to move to the second level.
3. Use v / V to select the Speaker Setup option then
press B to move to the third level. “Select” is
highlighted.
4. Press ENTER and 5.1 Speaker Setup menu
appears.
Volume
Distance
Test
Front L
Large
0
0.6(2)
dB
m(ft)
Off
Select
Move
Test
Press b / B to test the signals of each speaker. Adjust
the volume to match the volume of test signals
memorized in the system.
Front Left (L) → Center → Front Right (R) →
Rear Right (R) → Rear Left (L) → SubWoofer
Return
Operation
Size
If you connected speakers to your DVD/CD receiver,
setting the Distance lets the speakers know how far
the sound has to travel to reach your set listening
point. This allows the sound from each speaker to
reach the listener at the same time.
Press b / B to adjust the Distance of the selected
speaker.
[0.3m(1ft) - 6.0m(20ft)]
You can adjust the volume during operating the test
tone, first use v / V to select Volume or Speaker
option then use b / B buttons to select volume or
speaker, so that all speaker’s volume is same from
the listener’s position.
During operating the test tone, if you adjust the
volume, it will be paused in the current speaker
channel.
AUDIO
Speaker
Distance
title
This chapter includes important reference information
to help you set your DVD/CD receiver.
Enter
5. Use b / B to select the desired speaker.
6. Adjust options using v / V / b / B buttons.
7. Press ENTER to confirm your selection. Returns to
the previous menu.
Speaker selection
Select a speaker that you want to adjust. (Front
speakers (Left), Center Speaker, Front speakers
(Right), Rear speakers (Right), Rear speakers (Left),
or SubWoofer)
Note:
Certain speaker settings are prohibited by the Dolby
Digital licensing agreement.
Size
Since the speaker settings are fixed, you cannot
change the settings.
Volume
Press b / B to adjust the output level of the selected
speaker. (-6dB ~ +6dB)
33
Presetting the Radio Stations
Listening to the Radio
You can preset 50 stations for FM and AM (MW).
Before tuning, make sure that you have turned down
the volume.
Preset radio stations in the DVD/CD Receiver’s
memory first (see “Presetting radio stations” on the
left).
1. Press BAND on the remote control until FM or AM
(MW) appears in the display window.
1. Press BAND until AM (MW) or FM appears in the
display window.
2. And then every time you press BAND, FM and AM
(MW) changes alternately.
3. Press and hold TUNING
or
on
the front panel for about two seconds until the
frequency indication starts to change, then
release.
Scanning stops when the DVD/CD Receiver tunes in a
station. “TUNED” and “ST.” (for stereo program) appear
in the display window.
4. Press MEMORY/STOP on the front panel.
A preset number will flash in the display window.
5. Press TUNING
or
on the front
panel to select the preset number you want.
6. Press MEMORY/STOP on the front panel again.
The station is stored.
7. Repeat steps 3 to 6 to store other stations.
To tune in a station with a weak signal
Press TUNING
or
3 to tune in the station manually.
2. Press PRESET +/- repeatedly on the remote
control to select the preset station you want.
Each time you press the button, the DVD/CD Receiver
tunes in one preset station at a time.
3. Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or - on the
remote control repeatedly.
To turn off the radio
Press POWER to turn the DVD/CD receiver off or
select another function mode (CD/DVD, AV 1, etc.,).
To listen to non-preset radio stations
Use manual or automatic tuning in step 2.
For manual tuning, press TUNING
on the front panel repeatedly.
or
For automatic tuning, press and hold TUNING
or
for about two seconds on the
front panel.
repeatedly in step
To clear all the stored stations
Press and hold MEMORY/STOP for about two
seconds and “CLEAR ALL” is appeared in the display
window and then press MEMORY/STOP again, the
stations are cleared.
If you have accidentally entered into the "CLEAR
ALL" mode and you do not wish to clear the
memory, do not press any key. After a few seconds,
the "CLEAR ALL" display will go off by itself and
change to normal mode.
Note:
If all stations have already been entered, the FULL
message will appear in the display window for a
moment and then a preset number will flash.
To change the preset number, follow the steps 5-6 as
above.
34
The last received station is tuned in.
To select a preset radio station directly
You can use the number buttons on the remote
control to select a preset radio station directly.
For example, to listen to preset station 4, press 4 on
the remote control. To listen to preset station 19,
press 1 then 9 (within 3 seconds).
For your reference
If an FM program is noisy
Press MONO/ST. on the front panel so that “ST.”
disappears in the display window. There will be no
stereo effect, but the reception will improve. Press
the button again to restore the stereo effect.
To improve reception
Reorient the supplied antennas.
Sleep Timer Setting
Selecting input source
You can set the DVD/CD Receiver to turn off
automatically at a specified time.
You can use VCRs or other units connected to the
AV1, AV2 connectors, Coaxial connector or Optical
connector. Refer to the owner’s manual supplied with
the unit for further information on the operation.
The SLEEP indicator and sleep time appears in the
display window.
2. Each time you press SLEEP the setting
changes in the following order.
SLEEP 180 →150 →120→90 →80 → 70 → 60→ 50 → 40 →
30 → 20 →10 →OFF
Note:
• You can check the time remaining before the
DVD/CD receiver turns off.
Press SLEEP. The remaining time appears in the
display window.
Dimmer
This function will change the brightness of the display
window on the front panel during in power-on status.
Press the DIMMER repeatedly.
Mute
Press MUTE to mute your unit.
You can mute your unit in order, for example, to
answer the telephone, “MUTE” indicator flashes in the
display window.
Press AUX repeatedly on the remote control to
select the desired input source.
Each time you press this button, the mode of the
function changes in the following sequence:
AV 1: for selecting the analog signal from AV1 AUDIO IN
(L/R) & VIDEO IN Connectors.
AV 1 OPT: for selecting the optical digital signal from AV1
VIDEO IN & OPTICAL IN Connector.
AV 1 COAX: for selecting the coaxial digital signal from
AV1 VIDEO IN & COAXIAL IN Connector.
AV 2: for selecting the analog signal from AV2 AUDIO IN
(L/R) & VIDEO IN Connectors.
Notes:
• The Optical input function is available only when the
other unit’s Sampling Frequency is 32 ~ 96kHz.
• You can also select the input source by pressing
FUNC./PLAY button on the front panel.
Press and hold down this button about 3 seconds,
then press repeatedly to select input source.
Operation
1. Press SLEEP to set the desired sleep time.
Using Headphone Jack
Connect a stereo headphone plug ( 3.5mm) into the
PHONES connector.
The speakers are automatically disconnected when
you plug in a headphone (not supplied).
35
Language Codes
Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
Code
ET
FJ
FI
FR
DE
GB
GR
GL
HM
HK
HU
IN
ID
IL
IT
JM
JP
KE
KW
LY
LU
Country
Malaysia
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles
New Zealand
Nigeria
Norway
Oman
Pakistan
Panama
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation
Code
MY
MV
MX
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
PA
PY
PH
PL
PT
RO
RU
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Country Codes
Choose a country code from this list.
Country
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
36
Code
AF
AR
AU
AT
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
Country
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Greenland
Islands
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
Country
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
SA
SN
SG
SK
SI
ZA
KR
ES
LK
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Cause
Correction
No power.
• The power cord is disconnected.
• Plug the power cord securely into the
wall outlet.
The power is on, but
the DVD/CD Receiver
does not work.
• No disc is inserted.
• Insert a disc. (Check that the DVD or,
audio CD indicator in the DVD display
is lit.)
No picture.
• The TV is not set to receive DVD signal
output.
• Select the appropriate video input
mode on the TV so the picture from
the DVD/CD Receiver appears on the
TV screen.
• Connect the video cable into the
jacks securely.
• The video cable is not connected
securely.
• The connected TV power is turned off.
There is no sound or
only a very low-level
sound is heard.
The playback picture is
poor.
• The equipment connected with the
audio cable is not set to receive DVD
signal output.
• Select the correct input mode of the
audio receiver so you can hear the
sound from the DVD/CD Receiver.
• The audio cables are not connected
securely.
• Connect the audio cable into the
jacks securely.
• The power of the equipment connected
with the audio cable is turned off.
• Turn on the equipment connected
with the audio cable.
• The audio connecting cable is damaged.
• Replace it with new one.
• The disc is dirty.
• Clean the disc.
The DVD/CD Receiver • No disc is inserted.
does not start playback.
Loud hum or noise is
heard.
• Turn on the TV.
• Insert a disc. (Check that the DVD, or
audio CD indicator in the DVD display
is lit.)
• An unplayable disc is inserted.
• Insert a playable disc. (Check the
disc type, colour system and Regional
code.)
• The disc is placed upside down.
• Place the disc with the playback side
down.
• The disc is not placed within the guide.
• Place the disc on the disc tray
correctly inside the guide.
• The disc is dirty.
• Clean the disc.
• A menu is on the TV screen.
• Press the SET UP button to turn off
the menu screen.
• The Rating level is set.
• Cancel the Rating function or change
the rating level.
• The disc is dirty.
• Clean the disc.
• The speakers and components are
connected poorly.
• Connect the speakers and
components securely.
• The DVD/CD Receiver is located too
close to the TV.
• Move your TV away from the audio
components.
REFERENCE
Symptom
37
Cause
•
The
antenna
is
positioned
or connected
Radio stations cannot
poorly.
be tuned in.
Symptom
The Remote Control
does not work
properly.
The front panel
display is too dim.
38
Correction
• Connect the antenna securely.
• Adjust the antennas and connect an
external antenna if necessary.
• The signal strength of the stations is too
weak (when tuning in with automatic
tuning).
• Tune in the station manually.
• No stations have been preset or preset
stations have been cleared (when
tuning by scanning preset stations).
• Preset the stations (page 34).
• The Remote Control is not pointed at
the remote sensor of the DVD/CD
Receiver.
• Point the Remote Control at the remote
sensor of the DVD/CD Receiver.
• The Remote Control is too far from the
DVD/CD Receiver.
• Use the Remote Control within about 20
ft (6 m).
• There is an obstacle in the path of the
remote control and the DVD/CD
Receiver.
• Remove the obstacle.
• The batteries in the Remote Control are
dead.
• Replace the batteries with new ones.
• Nothing is displayed on the front panel
display.
• Press DIMMER on the Remote Control.
Specifications
Amplifier
Speakers
Supplied
Accessories
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
Stereo mode
Surround mode
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
Inputs
Outputs
Type
Impedance
Frequency Response
Sound Pressure Level
Rated Input Power
Max. Input Power
Net Dimensions (W x H x D)
Net Weight
Refer to main label
Refer to main label
4.4 kg
430 x 60 x 350 mm
Temperature: 5°C to 35°C, (41°F - 95°F)
5% to 85%
Semiconductor laser, wavelength 650 nm
NTSC 525/60
150 Hz to 18 kHz
More than 75 dB (1 kHz, NOP -6 dB, 20 kHz LPF/A-Filter)
More than 70 dB
0.5 % (1 kHz, at 1W position) (20 kHz LPF)
1.0 V (p-p), 75 Ω, negative sync., RCA jack x 2
1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x 1
(C) 0.3 V (p-p), 75 Ω
(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 2
87.5 - 108.0 MHz
10.7 MHz
60 dB (Mono)
150 - 8,000 Hz
530 - 1,720 kHz
450 kHz
90W + 90W (6Ω at 1 kHz, THD 10 %)
Front: 90W + 90W (THD 10 %)
Center*: 90W
Surround*: 90W + 90W (6Ω at 1 kHz, THD 10 %)
Subwoofer*: 150W (4Ω at 30 Hz, THD 10 %)
VIDEO 1, VIDEO 2, COAXIAL AUDIO, OPTICAL AUDIO
S-VIDEO, MONITOR, PHONES: (32 Ω, 1.0 V)
Front/Rear Speaker
(LHS-T6749T)
2 Way 5 Speaker
6Ω
150 - 20,000 Hz
84 dB/W (1m)
90 W
180 W
70 x 1200 x 72 mm
3.2kg
• Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . .6
• AM loop antenna . . . . . . . . . . . . . . . . . . . . .1
• Remote control . . . . . . . . . . . . . . . . . . . . . .1
Center speaker
(LHS-T6749C)
2 Way 5 Speaker
6Ω
150 - 20,000 Hz
84 dB/W (1m)
90 W
180 W
440 x 88 x 77 mm
1.8kg
Passive Subwoofer
(LHS-T6749W)
1 Way 1 Speaker
4Ω
40 - 200 Hz
83 dB/W (1m)
150 W
300 W
REFERENCE
FM
COMPONENT VIDEO OUT
AM
[MW]
Tuner
Video
CD/DVD
General
Power supply
Power consumption
Mass
External dimensions (W x H x D)
Operating conditions
Operating humidity
Laser
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
Video input
Video output
S-video output
195 x 398 x 417 mm
7.6kg
• Speaker cables . . . . . . . . . . . . . . . . . . .6
• FM antenna . . . . . . . . . . . . . . . . . . . . . 1
• Batteries (AAA) . . . . . . . . . . . . . . . . . . . 2
❋ Designs and specifications are subject to change without notice.
39
LG Electronics, Inc.
DVD/CD Receiver -LGDVT418
Limited Warranty - USA
This LG Electronics product, marketed by Zenith, will be repaired or replaced, at LG’s option, if it proves to be
defective in material or workmanship, under normal use, during the warranty period (“Warranty Period”) listed below,
effective from the date (“Date of Purchase”) of original consumer purchase of the product. This warranty is good
only to the original purchaser of the product and effective only when used in the United States, excluding U.S.
Territories.
WARRANTY PERIOD:
HOW SERVICE IS HANDLED:
LABOR: 90 days from the Date of Purchase.
Call 1-800-243-0000 for instructions on getting the
defective unit repaired or replaced.
PARTS: One Year from the Date of Purchase.
Please retain dated sales receipt and your box to
return the unit to LG for repair or replacement.
* Parts replaced are warranted for the remaining portion
of the original warranty period.
Shipping both ways will be paid by LG during the
Warranty Period. After the Warranty Period, you pay
inbound shipping charges and LG pays return shipping
charges.
Visit our website at: http://www.lgservice.com
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED
WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG
ELECTRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE
DAMAGES OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT
LIMITATION, LOST REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER
DAMAGE WHETHER BASED IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of
incidental or consequential damages or limitation on how long an implied warranty lasts, so the above exclusion or limitation may
not apply to you. This warranty gives you specific legal rights and you may also have other rights that may vary from state to state.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
z
Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration,
maintenance or failure to maintain, or separate system components; and
z
Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside
environmental specifications or contrary to the requirements or precautions in the Operating Guide, accident,
lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current or
voltage, reception problem caused by inadequate home antenna or faulty antenna connections, computer
software, institutional or commercial use, or other causes not arising out of defect in material or workmanship.
Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer.
CUSTOMER INTER-ACTIVE CENTER NUMBERS:
For nearest Authorized Service Center, Where to buy,
Product Assistance, or Customer Assistance
Call 1-800-243-0000 (24 hours a day, 365 days per year)
and select appropriate options from the menu.
Or visit our website at http://www.lgservice.com
LG Electronics U.S.A., Inc.
1000 Sylvan Avenue, Englewood Cliffs, NJ.
GS# 3834RH0055W
Printed in China
Issue O