AMX Enova® DGX 32 Enclosure Datasheet

DATA SHEET
Enova® DGX 32 Enclosure
AVS-ENOVADGX32-ENC-A (FG1059-33)
Overview
The new Enova DGX 32 Enclosure (AVS-ENOVADGX32-ENC-A) includes higher
wattage power supplies to increase the number of devices that can be powered
over DXLink by the enclosure. This robust Digital Media Switcher includes an
integrated NetLinx Controller, redundant power supplies and can be populated
with Enova DGX video input and output boards in addition to optional audio
insert/extract boards. There are four connections per video board, and each
enclosure holds eight video input boards and eight video output boards for a
maximum matrix of 32 x 32. The Enova DGX 32 is capable of supporting 4K and
Ultra High Definition (UHD) content.
The Enova DGX 32 is far beyond a modular media switcher with built-in controller - it functions as the centerpiece
of a complete integrated solution that manages and distributes analog and digital audio and video including
HDMI/HDCP, control and Ethernet. Easily integrate HDCP into system designs and enjoy hassle-free plug-and-play
operation. No tools, no delays and no key constraints – it just works with AMX’s exclusive InstaGate Pro®
Technology. Built for today's and tomorrow's needs, a comprehensive set of Enova DGX hot swappable boards can
be used in conjunction with DXLink and DGX Transmitters and Receivers to provide an end-to-end distribution
system over twisted pair cable or fiber. An integrated NetLinx Controller and embedded Ethernet switch enables
management of the entire solution including source equipment and display devices located throughout the
environment – all from a single point of control.
In addition to eliminating HDCP delays, InstaGate Pro allows traditionally key limited sources to be switched freely
to all connected HDCP compliant displays – eliminating HDCP key limitations that plague large applications. Builtin SmartScale® Technology on every output provides video that is perfectly scaled for each connected display,
© 2014 AMX. All rights reserved.
eliminating the integration challenges that can occur when sources and displays have different supported
resolutions - making it easy to specify, easy to install and easy to use. With the powerful combination of analogto-digital signal conversion, video scaling and high speed digital switching the system delivers perfect video every
time – regardless of signal type.
As part of a complete distribution system, easily send analog or digital audio and video including HDMI with HDCP
signals, plus control 10 Km over single mode fiber or 300 meters over multimode fiber; send all this plus power up
to 100 meters over standard twisted pair cable to and from the Enova DGX using the DXLink Twisted Pair and
Fiber Transmitters/Receivers.
Common Applications
The Enova DGX 32 is ideal for commercial or residential installations requiring the highest quality video to be
shared between 32 local or remote AV sources and destinations. Compact form factor allows for installation in
locations where space is limited and included redundant power supplies provides for constant uptime for mission
critical applications.
Features

HDMI/HDCP Switching with Simplicity of Analog – End-to-end distribution of HDMI/HDCP without

interruption or key constraints using InstaGate Pro Technology
4K and Ultra High Definition (UHD) Content Ready – Designed to support future resolutions for years to

come
HDCP Compliance Over Fiber – Compatible DXLink Fiber boards transmit uncompressed video, including
HDCP protected content, up to 10 Km at 10 Gbps (single mode fiber options transmit 10 Km, multimode 100
m)

Fiber Your Way – DXLink Fiber boards are available in single mode or multimode; simplex or duplex to meet
the needs of any installation

AV and Control over Twisted Pair, Fiber or Both – Send audio, video, bi-directional control and Ethernet over
twisted pair or fiber cable, or integrate both into the same system


Embedded NetLinx Controller – Allows any connected device to be managed, monitored or controlled
Integrated Ethernet Switch - Pass Ethernet through the attached DXLink Twisted Pair or Fiber Transmitters or

Receivers
Analog to Digital Video Conversion with Scaled Outputs – Converts any source signal to digital and uses

SmartScale Technology to automatically output video that is perfectly scaled for each connected display
6 RU Enclosure – Comparatively speaking, that’s half the space of the competition
Key Dealer Benefits

HDCP With Simplicity of Analog – Hassle-free plug-and-play operation eliminates the need for timeconsuming, cumbersome work around tools to deal with HDCP key constraints and resolution
incompatibilities

All-In-One Control and Distribution Solution – Powerful combination of modular matrix switcher, built-in
controller, embedded Ethernet switch and video scaling on every output simplifies the end-to-end
distribution and management of audio, video and control throughout multiple rooms

Fast Easy Installation – Leverage pre-existing standard twisted pair infrastructure to distribute highdefinition video, audio, control and Ethernet
Key Customer Benefits

Picture Perfect – Prevents degraded video due to incompatibilities between different display resolutions by
scaling the video to match each display's preferred resolution using innovative SmartScale Technology

Interruption-Free Content – Exclusive InstaGate Pro Technology allows audio and video to be switched
quickly and easily to every connected display without the difficulties typically associated with HDCP
2

Audio, Video and Control Everywhere – Provides end-to-end distribution of audio, video and control signals
throughout a residence or commercial facility over one twisted pair cable
Additional Features

InstaGate Pro Technology – Easily integrate HDCP into system designs and enjoy hassle-free matrix switching
to all compliant displays. No tools, no delays, and no key constraints – it just works

SmartScale Technology – Automatically responds to the display's declared EDID information and scales the
video to the best resolution and video parameters for that display without manual setup; this prevents
inferior video quality when sources are forced to lower resolutions to support the least capable display in the
system

DXLink Twisted Pair Input and Output Boards – HDCP Compliant boards send audio, video, control, Ethernet
and power over one standard twisted pair cable up to 200m – 100m to the matrix switcher and 100m after

the matrix switcher, see the Cabling for Success with DXLink white paper for more details
Built-in NetLinx Controller – Easily program and manage the entire solution including source equipment and

display devices located across multiple rooms – all from a single point of control
Easily Convert Analog to Digital Signals – Use the Enova DGX Digital Media Switcher in conjunction with
DXLink Multi-Format Transmitters (Twisted Pair or Fiber), and easily integrate legacy analog sources and
automatically convert their signals to digital

Hot Swappable Video Input / Output Boards – Easily add or replace I/O boards at any time after deployment
- the system automatically recognizes the new configuration and activates the boards

Audio Insert / Extract Boards – Add audio from a local source or extract embedded audio and send to a
separate audio system to distribute throughout an environment


3D Support – Pass through latest video formats including 3D and Deep Color
Surround Sound Support – Pass through high definition surround sound including Dolby TrueHD, Dolby

Digital, DTS-HD Master Audio, DTS, 2 CH thorough 8 CH L-PCM
High Speed Digital Switching – 12.8 Gbps ensures perfect pixel for pixel reproduction of video

Fully Redundant Power Supplies with Independent Power Paths – ensures maximum reliability for
applications that require 24/7 uptime
Specifications
GENERAL
Supported Signal Styles/Compatible Input and Output
Boards
For supported signal styles please see the data sheets
for Enova DGX compatible Input / Output Boards:
•AVS-ENOVADGX32-VI-HDMI, Enova DGX HDMI Input
Board (FG1058-540)
•AVS-ENOVADGX32-VO-HDMI, Enova DGX HDMI
Output Board (FG1058-550)
•AVS-ENOVADGX32-VI-DVI, Enova DGX DVI Input
Board (FG1058-600)
•AVS-ENOVADGX32-VO-DVI, Enova DGX DVI Output
Board (FG1058-610)
•AVS-ENOVADGX32-VI-DXLINK, Enova DGX DXLink
Twisted Pair Input Board (FG1058-570)
•AVS-ENOVADGX32-VO-DXLINK, Enova DGX DXLink
Twisted Pair Output Board (FG1058-580)
•ENOVADGX-VI-DXLINK-MMF-D, Enova DGX DXLink
Multimode Fiber Input Board, Duplex (FG1058-622)
•ENOVADGX-VO-DXLINK-MMF-D, Enova DGX DXLink
Multimode Fiber Output Board, Duplex (FG1058-632)
•ENOVADGX-VI-DXLINK-MMF-S, Enova DGX DXLink
Multimode Fiber Input Board, Simplex (FG1058-623)
•ENOVADGX-VO-DXLINK-MMF-S, Enova DGX DXLink
Multimode Fiber Output Board, Simplex (FG1058-633)
3
Dimensions (HWD)
Dimensions (HWD) with Extractors
Rack Units
Weight
Shipping Weight
MTBF
Per Channel Aggregate Data Rate (Max)
Noise Level
Airflow
Regulatory Compliance
Recommended Accessories
•ENOVADGX-VI-DXLINK-SMF-D, Enova DGX DXLink
Single Mode Fiber Input Board, Duplex (FG1058-620)
•ENOVADGX-VO-DXLINK-SMF-D, Enova DGX DXLink
Single Mode Fiber Output Board, Duplex (FG1058-630)
•ENOVADGX-VI-DXLINK-SMF-S, Enova DGX DXLink
Single Mode Fiber Input Board, Simplex (FG1058-621)
•ENOVADGX-VO-DXLINK-SMF-S, Enova DGX DXLink
Single Mode Fiber Output Board, Simplex (FG1058631)
•AVS-ENOVADGX32-AUD-INS-EXT, Enova DGX Audio
Insert / Extract Board (FG1058-700)
10 1/2" x 19” x 20” (26.54 cm x 48.3 cm x 51 cm)
10 1/2" x 19” x 21” (26.54 cm x 48.3 cm x 53.54 cm)
6
Approximately 73 lbs (33.1 kg) per loaded enclosure
Approximately 83 lbs (37.6 kg) per loaded enclosure
92,000 hours
12.8 Gbps
< 54 dBA @ 1m (Typical @ 25°C)
Forced Air (inlet on sides, exhaust on back & top)
CE EN 55022, EN 55024 and EN 60950-1
UL 60950-1
FCC Class A
cUL
RoHS / WEEE compliant
IEC 60950-1
•EXB-IRS4 ICSLan IR/S Interface, 4 IR/S and 4 Inputs
(FG2100-23)
•EXB-COM2 ICSLan Serial Interface, 2 Ports (FG210022)
•EXB-REL8 ICSLan Relay Interface, 8 Channels (FG210020)
•EXB-I/O8 ICSLan Input/Output Interface, 8 Channels
(FG2100-21)
•EXB-MP1 ICSLan Multi-Port, 1 COM, 1 IR/S, 2 I/O, 1 IR
RX (FG2100-26)
•CBL-HDMI-FL HDMI High Speed Flat Cable with
RedMere Technology (FG10-2180-16)
•CBL-RGB+A-FL RGB with Audio Flat Cable (FG10-218316)
Note: Compatible boards are listed above under
“supported signal styles/compatible input and output
boards”. Transmitter and receiver compatibility is
dependent on board selection, please see the data
sheet for the selected board for compatible
transmitters and receivers.
ACTIVE POWER REQUIREMENTS
AC Power
Power Consumption (Max)
Power Consumption (Typ)
Power Consumption w/DXLink Power (Typ)
100-240 VAC single phase, 50-60 Hz
1379 Watts, with redundancy
2758 Watts, without redundancy
585 Watts, fully loaded HDMI enclosure with
redundancy
1751 Watts, fully loaded DXLink Power enclosure
without redundancy
Use the Enova DGX Configuration Tool located at
AMX.com/enova to determine the power
4
Power Factor Correction
USB (HID) KEYBOARD & MOUSE
USB (HID)
ENVIRONMENTAL
Heat Dissipation (Max)
Heat Dissipation (Typ)
Heat Dissipation w/DXLink Power (Typ)
Humidity (Operating)
Humidity (Storage)
Temperature (Operating)
Temperature (Storage)
INTEGRATED CONTROLLER
LAN/Ethernet Port
requirements of a configuration and whether any of
the DXLink Transmitters or Receivers should be
powered with the local power supply to maintain PS
redundancy in the Enova Enclosure
Supported, complies with EN60555-2 and EN61000-3-2
Use the Enova DGX Digital Media Switcher in
conjunction with DXLink Transmitters and Receivers
(twisted pair and/or fiber), connect a DXLink
Transmitter to a PC and a DXLink Receiver to a
keyboard and mouse, the system then emulates
commands from the receiver back to the PC
4705 BTU/hr, with redundancy
9410 BTU/hr, without redundancy
1996 BTU/hr, fully loaded enclosure with redundancy
5975 BTU/hr, fully loaded DXLink Power enclosure
without redundancy
Use the Enova DGX Configuration Tool located at
AMX.com/enova to determine the power
requirements of a configuration and whether any of
the DXLink Transmitters or Receivers should be
powered with the local power supply to maintain PS
redundancy in the Enova enclosure
5% to 85% RH (non-condensing)
0% to 90% RH (non-condensing)
32° to 104° F (0° to 40° C)
-22° to +158° F (-30° to +70° C)
NetLinx On Board Master is an NI-3100 Class Controller
TCP/IP Uplink Port (LAN 10/100/1000)
Supports up to 64-Port Unmanaged 10/100 Ethernet
Switch (Cascaded architecture actual throughput
dependent on loading. Worst case per port throughput
10 Mbps, best case 100 Mbps when used with 32
DXLink Transmitters and 32 DXLink Receivers)
Processor
Memory
Program Port (USB)
Static IP or DHCP/DNS, SSL, Auto-negotiating, Half/Full
duplex, Auto MDI/MDI-X Cross-Over
TCP/IP, UDP/IP, CIP, SMTP, SNMP, Built-in Web server
Includes support for DXLink Devices
RJ-45 Connector
CPU 404 MIPS PowerPC
SDRAM 256 MB
NVRAM 1 MB
Flash 2 GB
USB Mini-AB (used for NetLinx Studio control)
ENCLOSURE CONTROL
Control Port (Serial)
Bidirectional RS-232
Baud Rates of 9600 (default), 19200, 38400, 57600
DB-9 Connector
Control Port (USB)
USB Mini-B
For a detailed PDF or DXF pictorial drawing please visit: http://www.amx.com/products/AVS-ENOVADGX32-ENC-A.asp
5
For audio, video and signal transport specifications please see compatible input / output board data sheets:
Compatible Boards
AVS-ENOVADGX32-VI-HDMI, Enova DGX HDMI Input Board
AVS-ENOVADGX32-VO-HDMI, Enova DGX HDMI Output Board
(FG1058-540)
(FG1058-550)
AVS-ENOVADGX32-VI-DVI, Enova DGX DVI Input Board
AVS-ENOVADGX32-VO-DVI, Enova DGX DVI Output Board
(FG1058-600)
(FG1058-610)
AVS-ENOVADGX32-VI-DXLINK, Enova DGX DXLink Twisted Pair Input Board
AVS-ENOVADGX32-VO-DXLINK, Enova DGX DXLink Twisted Pair Output Board
(FG1058-570)
(FG1058-580)
ENOVADGX-VI-DXLINK-MMF-D, Enova DGX DXLink Multimode Fiber Input Board, Duplex
ENOVADGX-VO-DXLINK-MMF-D, Enova DGX DXLink Multimode Fiber Output Board, Duplex
(FG1058-622)
(FG1058-632)
ENOVADGX-VI-DXLINK-MMF-S, Enova DGX DXLink Multimode Fiber Input Board, Simplex
ENOVADGX-VO-DXLINK-MMF-S, Enova DGX DXLink Multimode Fiber Output Board, Simplex
(FG1058-623)
(FG1058-633)
ENOVADGX-VI-DXLINK-SMF-D, Enova DGX DXLink Single Mode Fiber Input Board, Duplex
ENOVADGX-VO-DXLINK-SMF-D, Enova DGX DXLink Single Mode Fiber Output Board, Duplex
(FG1058-620)
(FG1058-630)
ENOVADGX-VI-DXLINK-SMF-S, Enova DGX DXLink Single Mode Fiber Input Board, Simplex
ENOVADGX-VO-DXLINK-SMF-S, Enova DGX DXLink Single Mode Fiber Output Board, Simplex
(FG1058-621)
(FG1058-631)
AVS-ENOVADGX32-AUD-INS-EXT, Enova DGX Audio Insert / Extract Board
(FG1058-700)
6
About AMX
AMX hardware and software solutions simplify the implementation, maintenance, and use of technology to create effective environments. With the increasing number of
technologies and operating platforms at work and home, AMX solves the complexity of managing this technology with reliable, consistent and scalable systems. Our award-winning
products span control and automation, system-wide switching and audio/video signal distribution, digital signage and technology management. They are implemented worldwide in
conference rooms, homes, classrooms, network operation / command centers, hotels, entertainment venues, broadcast facilities, and more. ©2014 AMX. All rights reserved.
Specifications subject to change. Revised 18-Feb-2014.
AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153
7