Lightolier PB2M1675 User's Manual
Add to My manualsadvertisement
Page 1 of 2
14"
9"
5"
Top View
20 1/8"
Calculite
®
ProSpec
®
Linear Downlight
PB2M1675
2 Light MR 16 Series B
10
5
17 3/8"L x 10"W
5" OC
17"
6 4
8
8 3/4" Depth 8 11
3
Flanged Trimless
1 3/4"
1 2 12
10"L x 5"W Opening
Ceiling Cutout: 11 1/16" L x 6 3/16" W
PB2M167EBL = (Flanged) Black/White
PB2M167EWL = (Flanged) White
PB2M167EBTL = (Trimless) Black
PB2M167EWTL = (Trimless) White
Add a “1” for 120v or “2” for 277v at the end of the catalog number for voltage
Ordering Information: MR 16 Series B
Cat. No. Lamp
PB2M167EBL
PB2M167EWL
PB2M167EBTL
PB2M167EWTL
(2) 75W MR16*
(2) 75W MR16*
(2) 75W MR16*
(2) 75W MR16*
Add a “1” for 120v or “2” for 277v at the *50W max. lamping when using accessories end of the catalog number for voltage
Ceiling Trim
Overlap
Overlap
Trimless
Trimless
Aperture Finish
Black with White Flange
White with White Flange
Black
White
Features
1. Aperture Frame: Provides clean support for lamp holders and overlapping flange or trimless installation. Extruded aluminum. Rigidly welded together on all corners.
2. Media Cartridge: Allows convenient loading and removal of one accessory.
Easily installed and removed for lamping with a simple twisting motion.
Constructed of die-formed aluminum.
3. Adjustable Ring: Allows 360° horizontal and 45° (on width) and 45° (on length) vertical adjustment.
4. Tortiontite Spring: For easy installation of aperture frame.
5. Housing: Die-formed 22 ga. steel. Finish: Black
6. Mounting Brackets: Adjustable vertically from outside of housing.
7. Thermal Protector: Meets NEC, UL, and CSA requirements.
8. Lampholder: Steatite for GX/GY 5.3 Bi-Pin lamps. 250°C Teflon ® leads.
9. Junction Box: 14 ga. steel, 4” x 3 1/2” x 2" box. Allows inspection from below.
10. Transformer Housing: Die-formed 18 ga. steel.
11. Lamp and Accessory Support: .032" steel, flared for easy entry of Media
Cartridge.
12. Lamp Guard: Heat resistant clear glass. Lamp manufacturers’ requirement
Electrical
Electronic Transformer: Individual for each lamp. Offers reliable operation and is accessible from below for servicing. 12V Secondary 75VA ea. lamps.
Dimming Controls: Use only dimmers specifically designed for use with electronic transformers. Low Voltage fixtures may produce audible sound when used with dimmers, which may be objectionable in acoustically critical areas.
UL /cUL listed for through branch circuit wiring with maximum of
(8) no. 12 AWG, 90° C.
Finishes
All painted finishes are powder coated baked enamel.
Options and Accessories
Accessories: 2 1/2” dia. series, filters, lenses, screens, and louver. (1) accessory maximum, including lamp cover glass. Lamp cover glass may be replaced with solid glass accessory.
Label
UL/cUL (Suitable for Damp Location), I.B.E.W.
Teflon ® is a registered trademark of E.I. DuPont.
US Patent Pending.
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • C0306
Page 2 of 2
Lighting Performance Data
Calculite
®
ProSpec
®
Linear Downlight
PB2M1675
2 Light MR 16 Series B
Data are based on bare lamp photometrics. Dashed lines in beam spreads indicate narrow axes of oval shaped beams.
FC is initial footcandles at center of beam. L and W are to the point that the candlepower drops 50% of maximum.
Job Information Type:
Lightolier
a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • C0306
advertisement
Related manuals
advertisement