Page 1 of 2

FEATURES

• For feeding downlights or exit signs.

• Male (power-in) and female (power-out) configuration.

• Adapter is 2 13/16" x 2 13/16" x 13/16" installed.

• Die cast housing with zinc plated steel cover plate.

• Fixture adapters can be wired for single or multi-level use.

• Thru wired for three circuits.

• Type 6M adapter wires are #18 AWG TFN solid copper conductors,

600 volt.

• Type 7M adapter wires are #12 AWG THHN stranded copper conductors, 600 volt.

• Type 6M and 7M have 6 inch tap leads.

• 1/2" K.O. connector for mounting to fixture.

POWER-CONNECT™

LA CABLE

LIGHTING ADAPTERS

APPLICATION DIMENSIONS

3/4"

2-5/16"

LA

The fixture adapter is the link between the wiring distribution and the fixture ballast(s). It mounts directly to the fixture body in a standard 1/2" K.O. (7/8" diameter). The adapter can be rotated for ease of cable orientation to prevent a strain on the connection.

Job Information

Job Name:

Cat. No.:

Lamp(s):

Volts/Ballast:

Type:

Lightolier a Genlyte Thomas Company www.lightolier.com

Technical Information: (978) 657-7600 • Fax (978) 658-0595

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710

We reserve the right to change details of design, materials and finish.

© 2002 Genlyte Thomas Group LLC (Lightolier Division)

A0902 OPTIONS/ACCESSORIES/Folio OA40-17

Page 2 of 2

WIRING DIAGRAM

POWER-CONNECT™

LA CABLE

LIGHTING ADAPTERS

“A” PHASE TAP “B” PHASE TAP

“C” PHASE TAP TWO CIRCUIT

ORDERING INFORMATION

Explanation of Catalog Number. Example: LP–LA–12–6–3

LP

–

LA

LOL POWER

CONNECT

TYPE:

LA =Lighting

Adapter

–

VOLTAGE:

12 - 120v

27 - 277v

– –

WIRING

CONFIGURATION:

6=#18 Tap Wires

7=#12 Tap Wires

M=Multi-level

A=“A” Phase Tap

B=“B” Phase Tap

C=“C” Phase Tap

LENGTH:

3=3 inches, standard length of flex

XX=Other length of flex

SPECIFICATIONS

• Fixture adapter can be wired for single or multi-level use.

• 1/2" K.O. connector for mounting to fixture.

• Adapter is 2 13/16" x 2 13/16" x 13/16" installed.

• Die-cast housing with zinc plated steel cover plate.

• Thru-wired for three circuits.

• Type 6M adapter wires are #18 AWG TFN solid copper connectors, 600 volt.

• Type 7M adapter wires are #12 AWG THHN stranded copper conductors, 600 volt.

• Type 6M and 7M have 6 inch tap leads.

Job Information Type:

Lightolier a Genlyte Thomas Company www.lightolier.com

Technical Information: (978) 657-7600 • Fax (978) 658-0595

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710

We reserve the right to change details of design, materials and finish.

© 2002 Genlyte Thomas Group LLC (Lightolier Division)

A0902 OPTIONS/ACCESSORIES/Folio OA40-17