Data Technology PRO MASTER 2500 Specifications

4
Gang
Programmers
4
Gang
Programmers
Section 4
Gang
Programmers
4
Gang
Programmers
4
Gang
Programmers
4
Gang
Programmers
 2001 Microchip Technology Inc.
DS00104F-page 4-1
DS00104F-page 4-2
 2001 Microchip Technology Inc.
4
Gang
Programmers
Advanced Transdata
Corporation
PGM2000
8-Gang Programmer for PIC12CXXX,
PIC14C000, PIC16CXXX, PIC17CXXX and
PIC18CXXX
Features:
 2001 Microchip Technology Inc.
Program data and configuration fuse settings is initially
downloaded into the EEPROM of the MCU read from a
master chip or downloaded from a file on the PC host.
Once the codes reside in the MCU, they are stored
securely and protected from accidental modifications.
A Liquid Crystal Display (LCD) on the MCU provides
users with different functional menus and programming
results. There are two sets of functional menus. A regular
set for the operating staff with access to program, blank
check and verify functions only. A second secured
function set allows authorized personnel to specify
programming mode, configuration fuse, programming
voltages and read data from a master device to the MCU.
Several 8-socket program adapters are available to
program different PICmicro MCU devices and package
types. Each of the eight slave sockets is equipped with a
Light Emitting Diode (LED) to indicate blank check, verify
and program results.
To ensure that no defective codes will be duplicated,
PGM2000 tests the integrity of the data against its
checksum before each programming cycle which includes
blank check, program (data and configuration fuse) and
verification at the two selected voltages.
4
4
4
Gang
Programmers
14330 Midway Road, Suite 128
Dallas, TX 75244
TEL: (972) 980-2667/2960
FAX: (972) 980-2937
email: info@adv-transdata.com
web: www.adv-transdata.com
PGM2000 is a universal PICmicro MCU 8-gang
programmer supporting most PICmicro microcontrollers.
It comprises of a Master Control Unit (MCU) which
connects to an interchangeable 8-socket program adapter
for chip duplication. It is designed according to Microchip
Technology’s programming specifications to ensure its
quality as a production programmer.
Gang
Programmers
Advanced Transdata Corporation
Product Information:
Gang
Programmers
Contact:
4
Gang
Programmers
• Production quality 8-gang programmer for
most PICmicro® microcontroller (MCU)
devices
• FLASH-based firmware allows easy
product update and new device support
• Stores two set of data to be programmed
in EEPROM memory
• Different programming adapters for device
groups and package types
• Programming adapters available for
processors from other IC manufacturers
• Data to be programmed are securely
stored inside EEPROM memory of MCU
• Checksum verification alerts users of any
data corruption in master codes
• Supports sequential serialization
• LCD display provides function menus and
programming results
• Selectable program modes:
1) Blank check/program/verify
2) Program/verify only
3) Program fuse only
• Adjustable VDD, VPP, VDD_MAX and
VDD_MIN in 0.1 volt increments
• Stand-alone duplication mode
• Data to be duplicated can be read from a
chip or from a file on PC
• Hosted by any IBM PC® or compatible via
standard parallel port
• Supports Binary and HEX object files
• Comes with Windows® 95/98/NT® driver
software (for PC-hosted mode), cable,
power adapter and User’s Guide
DS00104F-page 4-3
Advantech
Equipment Corp.
LabTool-848
Features:
• Eight independent, fully isolated
48-pin ZIP sockets
• FLASH, EPROM, EEPROM, PIC16CXXX
support
• Device insertion and continuity test
• Support both 5V and 3V chips
• High throughput, program eight pieces
8 Mb flash chips within 45 seconds
• Semiconcurrent programming with
auto-sensing/self-start automatically
independent modules allow flexible
configuration and minimum down time
• Universal adapters support 48 TSOP,
44 PSOP, 40 TSOP flash chips.
• Project file save/load function
• Variable verify voltage with one/two pass
• Print port interface with auto
switch power supply
• Run on DOS™ and DOS prompt of
Windows® 3.1/95/98
• Devices and software updates via the
Web.
• Optional handler interface
Product Information:
The LabTool-848 is a PC parallel-port-base gang
programmer. It features eight fully-isolated 48-pin ZIF
sockets, extremely high throughput, standard 5V and 3V
chip support, device insertion and continuity check. The
PC-base design of the LabTool-848 means that device
updates are available via software, enabling customers
more flexibility and quicker access to new chip support.
The LabTool-848 supports EPROM, EEPROM, FLASH,
and PIC16CXXX microprocessors.
The LabTool-848 was built with flexibility in mind. If
customers have special chips that not in our standard
support list, we can provide a special program that allows
the LabTool-848 to become a customized, special chips
production gang programmer.
Using the PC as a resource enables the LabTool-848 to
support from 32K bit chips to 128 Mbit memory chips
without upgrading the hardware. Eight independent
onboard FPGAs provide full isolation between each
socket.
Contact:
Advantech Equipment Corp.
Fl.7, No.98, Ming-Chuan Road,
Shing-Tien City,
Taipei, Taiwan
TEL: 886-2-2218-2325
FAX: 886-2-2218-2435
email: citron_chang@acl.advantech.com.tw
web: www.aec.com.tw
DS00104F-page 4-4
Programming throughput is the key feature of the LabTool848. By implementing the semiconcurrent programming
with auto-sense self-start technology, the operator can
load/unload four chips while simultaneously programming
the remaining four chips.
An operator can program over three thousands 8 Mbit
flash chips per day with one LabTool-848. LabTool-848
also provides the universal adapters for flash memory.
Customers can order 48-, 40-, and 32-pin TSOP or 44-pin
PSOP adapters to fit the same package of different flash
chips, eliminating the need to buy multiple adapters.
 2001 Microchip Technology Inc.
4
Advin Systems Inc.
Gang
Programmers
PILOT-1600
Features:
•
•
•
•
•
•
4
Gang
Programmers
Product Information
PILOT-1600 is designed for the production centers that
demand high throughput. It programs 16 Microchip
Technology PICmicro microcontroller (MCU) devices
simultaneously, typically in 15 seconds to 1 minute,
depending on device size. Each device is verified with
both high and low Vcc margins according to Microchip
Technology’s production programmer requirements.
PILOT-1600 is a very versatile memory/micro
programmer, capable of programming all of Microchip
Technology’s PICmicro MCUs and Serial PROMs. It also
supports a wide variety of other devices including
EPROMs, flash and other kinds of micros.
Contact:
Advin Systems Inc.
 2001 Microchip Technology Inc.
PILOT-1600 interfaces to the PC host through the
standard parallel port. Built-in power supply automatically
adjusts to any international AC input voltage between 85
and 264 volts, making it ideal for international use.
Advin has been making quality programmers for more
than ten years and customer happiness is their number
one priority. Please call and see how they can meet your
needs.
DS00104F-page 4-5
4
Gang
Programmers
1050-L East Duane Ave
Sunnyvale, CA 94086
TEL: (888) GO-ADVIN, (408) 243-7000
FAX: (408) 736-2503
Tech Support: (800) 627-2456
web: www.advin.com
International Distributors
Please visit www.advin.com
Supplied software is very easy to use and provides plenty
of useful functions such as reading from a data file or
master, setting of specific configuration bits, device
securing, automatic generation of serial numbers, etc.
Macro files can be setup easily, translating into simple
operation for non-technical personnel.
4
Gang
Programmers
Easy snap-on GM-series gang modules allow fast change
from one package type to another. A complete array of
gang modules is available directly from Advin for
programming all package types, including: DIP, PLCC,
SOIC, SSOP, TSSOP and TQFP.
4
Gang
Programmers
•
•
Proven industrial quality
Free lifetime software updates via the Web
True low voltage support down to 1.8V
Programs 16 devices simultaneously,
1000+ devices per hour)
CE certified
Complete support for all Microchip
Technology PICmicro® microcontroller
(MCUs) and Serial EEPROMs, including:
- PIC12CXXX
- PIC14CXXX
- PIC16C5X
- PIC16C6X
- PIC16C62X
- PIC16C7XX
- PIC16F87X
- PIC16C9XX
- PIC17CXXX
- 24LCXX
Supports other EPROMs/micros
Field expandable to support logic devices
Data I/O Corporation
ProMaster 2500
Features:
• Supports PICmicro® microcontrollers
(MCU), Serial EEPROMs, Parallel
EEPROMS and EPROMs
• Programs, tests, labels and sorts in a
single-pass, tube-to-tube operation
• Pick-and-place device transport
protects SMT and other devices
against physical damage
• Changeovers from one package style to
another can be done in two minutes or less
— no tools or special skills are required
• Fully grounded device-contact surfaces
guard against ESD damage
• Advanced pin electronics are tuned to
ensure optimum signal fidelity and superior
programming yields for high-speed devices
• Easy-to-use, PC-based software provides
integrated control of all system
components, including the handler,
programmer and data source
• Detailed statistics of each programming
session let you analyze programming
trends and better manage quality
Product Information:
The ProMaster® 2500 from Data I/O® is a fully integrated,
automated system for programming, testing, sorting and
labeling programmable devices. The first device-handling
system in the industry to incorporate programming
hardware within its design, the ProMaster 2500 reaches a
new level of system integration, making operation simpler
and more reliable than ever.
Providing universal support for devices in DIP packages
up to 32 pins, PLCC packages up to 84 pins, and 150-mil
through 530-mil SOIC packages with 8 to 44 pins, the
ProMaster 2500 programs, labels and sorts as many as
5001 devices per hour. Its state-of-the-art pick-and-place
handling technology minimizes damage to delicate
surface-mount devices for safe, high-yield SMT
production. Automated tube-to-tube processing also
eliminates human errors and device damage, and
minimizes any electrostatic discharge (ESD) damage
caused by human handling.
The system is controlled by Data I/O’s TaskLink Software
for easy automation of programming tasks. The result is a
complete turnkey solution that improves the productivity,
quality and flexibility of your production process.
Contact:
Data I/O Corporation
10525 Willows Rd. NE
P.O. Box 97046
Redmond, WA 98073-9746
TEL: 425-881-6444
1-800-332-8246
FAX: 425-869-7423
email: telsales@data-io.com
web: www.data-io.com
1. Actual throughput will depend on device programming/testing times.
DS00104F-page 4-6
 2001 Microchip Technology Inc.
4
Data I/O Corporation
Gang
Programmers
ProMaster 3000
Features:
4
Product Information:
Providing universal support for devices in both DIP and
surface-mount technology (SMT) packages up to 84 pins,
the ProMaster 3000 can program, label and sort as many
as 7001 devices per hour. Its state-of-the-art pick-andplace handling technology minimizes damage to delicate
surface-mount devices, for safe high-volume, high-yield
SMT production. Automated tube-to-tube processing also
eliminates human error and device damage, and
minimizes any electrostatic discharge (ESD) damage
caused by human handling.
Data I/O Corporation
4
Gang
Programmers
10525 Willows Rd. NE
P.O. Box 97046
Redmond, WA 98073-9746
TEL: 425-881-6444
1-800-332-8246
FAX: 425-869-7423
email: telsales@data-io.com
web: www.data-io.com
1. Actual through-put will depend on device programming/testing times.
 2001 Microchip Technology Inc.
4
Gang
Programmers
Contact:
From input to output, the ProMaster 3000 has been
designed for flexibility. Pick-and-place heads can rotate
devices, so programming and labeling proceed without
interruption regardless of device orientation in the tubes.
A high-density, thermal printer quickly prints and applies
device labels, available in a wide variety of materials and
sizes, in one swift and precise operation. The ProMaster
3000 is also available with automated tape-and-reel
output.
4
Gang
Programmers
The ProMaster 3000 from Data I/O® is a fully integrated,
fully automated system for programming, testing, sorting
and labeling programmable devices. The system is
controlled by Data I/O’s TaskLink PC Control Software for
easy automation of programming tasks. The result is a
complete turnkey solution that improves the productivity,
quality and flexibility of your production process.
Gang
Programmers
• Fully integrated and automated system for
programming, testing, sorting and labeling
programmable devices
• Easy automation of programming tasks
• A complete turn-key solution
• Universal support for devices in both DIP
and surface-mount technology (SMT)
packages up to 84 pins
• Programs, labels and sorts as many
as 700 #1 devices per hour
• State-of-the-art pick-and-place
handling technology
• Automated tube-to-tube processing
• Available with automated
tape-and-reel output
DS00104F-page 4-7
Data I/O Corporation
PP 100
Features:
• Supports: PIC12CXXX, PIC14C000,
PIC16C5X, PIC16C6X, PIC16C62X,
PIC16C7XX, PIC16F87X, PIC16C9XX
and PIC17CXXX
• Supports memory, microcontroller and
logic devices
• Programs DIP, PLCC, SOIC, QFP, TSOP,
BGA, uBGA and other chip-scale
packages
• Modular system design allows
configuration for a wide range of
applications
• Configurable with 4 to 16 concurrent
programming sites
• Flexible input/output media options for tray,
tube and tape
• Label or Laser (CO2 or Yag) marking
• Optional vision positioning system for
device alignment accuracy
• ETU software with intuitive menus for job
creation and statistical analysis
• Small mechanical footprint
(46-inches L x 32-inches W x 62-inches H)
• Worldwide sales, service and support
Product Information
The PP 100 is a highly flexible and configurable
automated device programming and marking system for
both conventional and fine-pitch devices. From the steelframe construction to industrial servo-motors and linear
glass encoders, the PP 100 is designed with highly
durable, production-quality components to provide the
highest level of reliability and performance.
The PP 100 can be configured with up to 16 high-speed
programming sites and a fully configured system provides
a throughput of up to 850 devices per hour. Each
programming site provides 84-pin drivers as standard,
with unlimited pin driver expansion. The programming
sites support all device technologies including FLASH,
FPGA, memory, microcontroller and logic.
Contact:
Data I/O Corporation
10525 Willows Road N.E.
P.O. Box 97046
Redmond, WA 98073-9746
TEL: 1-800-3-DataIO
(1-800-332-8246)
(425) 881-6444
FAX: (425) 869-7423
BBS: (425) 882-3211
email: telsales@data-io.com
web: www.data-io.com
DS00104F-page 4-8
Input and output feeder options include tray (JEDEC,
Motorola® or NEC), tube or tape-and-reel and devices can
be marked with a laser (CO2 or YAG) or a labeler. Built-in
Ethernet capabilities allow easy hook-up to a Novell
network for central control and download of data files from
a secured database.
 2001 Microchip Technology Inc.
Hi-Lo Systems, Inc.
4
ALL-GANG-08 Universal
Gang Programmer
Gang
Programmers
Features:
44388 S. Grimmer Blvd.
Fremont, CA 94538, USA
TEL: (510) 623-8859
FAX: (510) 623-9925
email: sales@tribalmicro.com
web: www.hilosystems.com
Hi-Lo Systems Research Co., Ltd.
 2001 Microchip Technology Inc.
The ALL-GANG-08 connects to the serial port of any
desktop or laptop PC and features a new Windows
compatible interface that makes it easy to use for an
operator of any skill level. Only a single external key on
the programmer needs to be used by the operator after
setup. Programmer setups can be stored in a
configuration file for easy recall. As part of the ALL-LAB
family the ALL-GANG-08 programmer can be expanded
to a Universal Programmer by purchasing the ALL-11
option.
Hi-Lo works closely with Microchip Technology to provide
prompt support for new device families. Hi-Lo's products
are approved by major IC manufacturers. The ALLGANG-08 is supported by a network of distributors in over
50 countries worldwide. Hi-Lo has been a leading
provider of high-quality, low-cost programmer products
since 1986.
4
4
4
Gang
Programmers
4F, No. 20, Lane 76
RUI Guang Rd.
NEI HU, Taipei, Taiwan
TEL: 886-2-8792-3301
FAX: 886-2-8792-3285
email: hilosys@hilosystems.com.tw
web: www.hilosystems.com.tw
The ALL-GANG-08 features interchangeable socket
options to support many more device families and
packages than a typical low-cost gang programmer. The
ALL-GANG-08 supports gang programming of nearly all
Microchip Technology PICmicro family microcontrollers
as well as memory and logic IC's. The ALL-GANG-08's
interchangeable sockets support DIP, PLCC, SOP, SSOP,
QFP, TSOP and other packages. The ALL-GANG-08 is
designed to support new device families and packages as
they are released.
Gang
Programmers
Hi-Lo Systems, Inc.
Product Information:
Gang
Programmers
Contact:
4
Gang
Programmers
• Loads data from files on the PC
or from a master IC
• Programs eight ICs at one time
• Supports PIC12CXXX, PIC16C5X,
PIC16C6X, PIC16C6XX, PIC16C7XX,
PIC16C7X and PIC16F87X
• Interchangeable sockets support DIP,
SOIC, PLCC, SSOP, QFP, etc.
• Supports EPROM, EEPROM, FLASH,
PICmicro® microcontroller (MCUs) and
PLD
• Universal programmer option available
• New Windows®-compatible user interface
makes programming simple
• Programs and verifies (at VDD_MAX and
VDD_MIN) eight PIC16C62 in 12.5 seconds
• Includes free software updates
DS00104F-page 4-9
LEAP
Electronic Co., Ltd.
SU-2000
CARTRIDGE MODULE
SEEPROM-248D
Features:
• SEEPROM-248D supports gang
programming for Serial EEPROM devices
for 93LCXX and 24LCXX series
• Additional products available to support
gang programming for PIC12CXXX,
PIC14C000, PIC16C5X, PIC16C6X,
PIC16C62X, PIC16C7XX, PIC16F87X,
PIC16C9XX and PIC17CXXX
• Provides an optional easy-to-use
Windows® basis software for PC
• Includes console keyboard for use without
a PC host
• Complies with TUV ISO-9002 production
requirements and EMC requirements
• Support of the “green” low-voltage devices
• DC parametric test
• Able to perform IC insertion and contact
checks before programming.
• Be able to detect poor pin contact and
devices inserted upside down or in the
wrong position
• Package support: up to 24-pin DIP and
SOP (adaptor needed)
• Device operations: sumcheck, blank
check, read, program, verify and erase
Product Information:
The SU-2000 is designed for mid-volume applications.
Expanding the capabilities of the system are cartridge
modules that support PICmicro® microcontroller (MCUs)
and SEEPROM.
Those modules compatible with SU-2000 offers two
modes of operation. For operation in a stand-alone
environment, you can use the SU-2000 smart and
easy-operation keyboard with r x 20 LCD character
display. Or, for greater flexibility and control of your
complete programming operation, they can be driven
under Windows 3.1/95 systems.
The benefits of the cartridge module design include:
1
More convenient. The ability to quickly change
cartridge modules for new devices – easy and
conveniently.
2. More economical. For new devices, you only need
to change the cartridge module. You do not need to
buy another main module – fully utilizing, saves
money and truly economical.
Contact:
LEAP Electronic Co., Ltd.
6th F104, No. 4, Lane 609
Chunghsin Rd., Sec. 5
Sanchung, Taipei Hsien
Taiwan
TEL: (886) 2 29991860
FAX: (886) 2 29990015
DS00104F-page 4-10
 2001 Microchip Technology Inc.
4
Lloyd Research Ltd.
Gang
Programmers
L9000
Modular Programmer
Features:
4
Product Information:
The L9000 is a modular programmer which supports
virtually all EPROMs, FLASH and almost the entire
PICmicro® Microcontroller (MCU) range in both DIL and
SOIC packages.
Devices can be programmed with serial numbers.
Contact:
Lloyd Research Ltd.
 2001 Microchip Technology Inc.
New devices are added monthly and the latest device list
is available on our Web site together with a list of
international distributors.
Both serial and parallel ports are fitted to the L9000. An
optional data compression program reduces download
time to 10 seconds per megabit for larger devices.
4
4
Gang
Programmers
Distributors:
Brazil:
(55) 114535588
Denmark: (45) 75643366
(45) 57642251
France:
(33) 139611414
Germany: (49) 893071096
(49) 898343047
Italy:
(39) 024459203
Malaysia: (60) 37341017
(60) 46422088
Norway:
(47) 33165700
(47) 63952000
Portugal: (35) 114715517
Singapore: (65) 7477234
Swedish
(46) 84441050
(46) 58919250
USA:
Distributor inquiries welcome
A simple batch file facility allows the user to download
code and select device type and programming options
which simply leaves the operator to fit devices and press
the program button. There is also an optional PC software
driver.
Gang
Programmers
7 & 7A Brook Lane, Warsash,
Southampton, S031 9FH, UK
TEL: (44) 1489 574040
FAX: (44) 1489 885853
email: progs@lloydres.co.uk
web: www.lloyd-research.com
The L9000 has been tested and approved by three
semiconductor vendors.
4
Gang
Programmers
The L9000 is ideal for production because there are
purpose-designed modules rather than socket adaptors.
Modules are available for DIL, (P)LCC, SOIC, TSOP and
QFP, etc.
Gang
Programmers
• Gang programs up to 8 PIC16C5X,
PIC16C5XX, PIC16C6X, PIC16C6XX,
PIC16C7XX, PIC16C8X, PIC17CXXX,
PIC17CXXX and PIC12C50X
• Purpose designed modules with DIL,
SOIC or PLCC sockets eliminate crude
socket adaptors
• Local LCD for stand-alone operation or
use with a PC (DOS™ and Windows® 95/
98 or WIndows NT®
• Other gang modules for EPROM,
EEPROM, FLASH and Microcontrollers
• Free telephone support
• Extensive sales and service network
DS00104F-page 4-11
MQP Electronics
System 2000
With Programming Module
MP1 or MP3 and Package Converters
Features:
• Supports PIC16C5X, PIC16C6X,
PIC16C7X, PIC16C8X, PIC16C92X,
PIC17C4X and PIC12C50X
• High-speed stand-alone
Gang programmer
• Fast and reliable programming
• Complete PC remote control
capability included
• Exchangeable programming modules
allow system to cater for most
production programming requirements
Product Information:
The System 2000 is a stand-alone programming system
mainly intended for volume production.
It can also be quickly connected to any PC compatible, via
serial or parallel port, to take advantage of the addedvalue production batch features.
It is extremely fast: the MP4 EPROM module will program
sixteen 1 Mbit EPROMs in around 20 seconds, including
all normal checks and verification at two different user
selectable VCC levels.
Contact:
MQP Electronics Ltd.
Park Road Centre
Malmesbury
Wilts SN16 0BX England
Tel: (44) 1666 825666
Fax: (44) 1666 825141
email mqp@compuserve.com
web: www.mqp.com
Distributors:
UK:
(44) 1666 825 666
France:
(33) 1 69 41 28 01
Germany:
(49) 811-6 00 05 0
Italy:
(39) 2 92 10 35 54
Ireland:
(353) 1 2800395
Japan:
(81) 729 81 6332
S.E.Asia:
(65) 749 616
South Korea: (82)2 633 8788
U.S.A:
(1) 949 493 7603
DS00104F-page 4-12
With module MP3 and the relevant package converter
fitted, it can program eight PICmicro® microcontroller
(MCUs) in under 1 second. This includes blank check,
programming and verification at two VCC levels, plus in the
case of a PICmicro microcontroller (MCU), any of the
special functions such as watchdog disable or code
locking which may be automatically performed, making
the production of a quantity of programmed PICmicro
microcontroller (MCUs) extremely fast.
Module MP1 is a universal programming module with a
single socket. Flexible design using reconfigurable logic
protects your investment and allows: any voltage on any
pin; power supplies on any pin; programming slew rates,
voltage measurement on any pin.
 2001 Microchip Technology Inc.
MQP ELECTRONICS
Features
•
•
•
•
Programming of parts is prevented if the Master pattern
does not have the correct checksum, avoiding expensive
manufacturing errors.
All programmers in the range comply with the more
stringent manufacturing programming specification from
Microchip Technology. This ensures excellent
programming margins.
4
Gang
Programmers
Stand-alone or PC driven
Programs up to 8 devices simultaneously
Very high throughput
Low-cost (cheaper than a single-site
universal programmer)
• Programming to full Microchip Technology
production specifications
• Program from Master EPROM or internal
buffer
• Single button operation
MQP’s Pin-Master PICmicro® microcontroller range is
due for release 2nd quarter ‘99. The programmers have
been specially designed for economic medium scale
production. The emphasis is on quality control, reliability
and speed.
Gang
Programmers
Pin-Master Gang
Programmers for PICmicro®
Devices
4
Product Information:
Programming is a single key operation.
4
Gang
Programmers
Contact:
MQP Electronics Ltd.
Park Road Centre
Malmesbury
Wilts SN16 0BX England
Tel: (44) 1666 825666
Fax: (44) 1666 825141
email mqp@compuserve.com
web: www.mqp.com
Distributors.
Gang
Programmers
(44) 1666 825 666
(33) 1 69 41 28 01
(49) 811-6 00 05 0
(39) 2 92 10 35 54
(353) 1 2800395
(81) 729 81 6332
(65) 749 616
(82) 2 633 8788
(1) 949 493 7603
 2001 Microchip Technology Inc.
4
Gang
Programmers
UK:
France:
Germany:
Italy:
Ireland:
Japan:
S.E.Asia:
South Korea:
U.S.A:
4
DS00104F-page 4-13
ProgRama Tools
ChipBurner-Gang 8
Features:
• Ideal for bringing costly outsourcing of
volume programming in house at a very
low cost
• Supports up to eight devices at
one-time - virtually any package any
technology
• Program hundreds of devices in
under an hour
• Fully self-contained stand-alone desktop
workstation for full gang, set and set-ofsets programming-contains it's own PC
• PC-driven model is also available to keep
your entry costs at a minimum
• Industry’s first Microsoft® Windows®
user interface allows user to see the
entire programming setup at a glance
• Serialization and unique label ID
• Revolutionary built-in PCMCIA FLASH
Memory Card and docking port provides
systematic storage for all customized
masters
• Free lifetime technical assistance and
device library updates ensure that you get
an easy start and stay on easy terms with
your ChipBurner
Contact:
ProgRama Tools
Product Information:
The ChipBurner-Gang 8 is the ideal solution to bring your
costly outsourcing of volume programming in house to
meet today's bottom line. The ChipBurner-16 allows you to
program up to sixteen devices at one time. The capability
to produce hundreds of devices in an hour makes it a truly
production oriented system at an affordable price.
Outsourcing volume programming is no longer costjustifiable and with the ChipBurner-16 there are no setup
fees and turnaround time is immediate to meet your needs
and schedules. Serialization and unique label IDs for each
device being programmed is supported. The ChipBurnerGang 8 features gang and set support for virtually any
EPROM, EEPROM, FLASH, or PICmicro® microcontroller
in any package with an unparalleled high- speed data
download of 230.4 Kbytes per second.
Two low-cost ChipBurner-Gang 8 models are available to
fit your programming needs and budget: the ChipBurnerS8 (Stand-alone) and the ChipBurner-R8 (Remote). The
advanced features of the ChipBurner-S8 for full volume
production not only operates when attached to a PC host,
but can also be equally operated as a fully self-contained
engineering or production desktop workstation. The
ChipBurner-S8 contains its own CPU and is, therefore,
completely portable. Its stand-alone capability allows
simple one-key-programming operation from a 30-key
integrated keyboard and a large 40-character Liquid
Crystal Display (LCD). The ChipBurner-R8 Remote model
is strictly PC-driven keeping your entry costs at a
minimum.
3500 NW Boca Raton Blvd.
Bay 501-506
Boca Raton FL 33431
TEL: 800-668-8843
561-338-8843
FAX: 561-338-8447
email: supportprogramatools.com
web:
www.programatools.com/programa.htm
DS00104F-page 4-14
 2001 Microchip Technology Inc.
ProgRama Tools
4
ChipBurner-Gang 16
Gang
Programmers
Features:
 2001 Microchip Technology Inc.
Multi-Matrix Gate Array Technology enables the
ChipBurner-Gang 16 to achieve greater results than
cluster or concurrent programmers which are simply not
suited for gang, set, or set of sets programming. Their
exorbitant cost, thousands of dollars more, is not cost
justifiable. And unlike conventional programmers, the
ChipBurner-Gang 16 can read, blank check, verify and
program your entire gang/set at once and at exceptionally
fast programming speeds. No other programmer offers
higher accuracy and throughput per dollar.
Among its cutting edge innovations is the introduction of
full parity checking to the device programming industry,
used by all major PC manufacturers to ensure absolute
RAM data integrity. Also, the revolutionary introduction of
a PCMCIA Memory Card docking port provides
systematic storage for all customized master devices, as
well as, PROMSoft-XD, the industry’s first Microsoft
Windows-based interface for device programmers. A few
clicks on the screen is all that is necessary to allow the
user to create a complete and easy to use automated
workstation.
DS00104F-page 4-15
4
4
4
Gang
Programmers
3500 NW Boca Raton Blvd.
Bay 501-506
Boca Raton FL 33431
TEL: 800-668-8843
561-338-8843
FAX: 561-338-8447
email: supportprogramatools.com
web:
www.programatools.com/programa.htm
ChipBurner-Gang 16 is a revolutionary nextwave
programmer providing for the hottest and smartest
technological digital applications for gang and set
programming. The ChipBurner-Gang 16 allows you to
program up to 16 devices at one time, making it a truly
production oriented system at a very low price. The
ChipBurner Gang-16 features support for virtually any
EPROM, EEPROM, FLASH, or PICmicro®
microcontroller (MCU) in any package with an
unparalleled high-speed data download of 230.4 Kbytes
per second.
Gang
Programmers
ProgRama Tools
Product Information:
Gang
Programmers
Contact:
4
Gang
Programmers
• Fully self-contained, stand-alone desktop
workstation for full gang, set and set of
sets programming-contains its own PC
• Supports up to 16 devices at one time
• Achieves same high yield as a cluster or
concurrent programmer, yet is priced
thousands of dollars less
• 25 keys and large 40-character LCD for
extensive stand-alone, user-friendly
operations including data editing split and
shuffle in both HEX and ASCII and
advanced serialization labeling
• Can communicate with a host PC using
the industry’s first Microsoft® Windows®
interface for device programmers –
PROMSoft-XD
• Industry's first use of parity checking for
absolute RAM data integrity
• Industry's first Microsoft Windows-based
interface for device programmer
• Revolutionary built-in PCMCIA Memory
Card docking port which provides
systematic storage of all customized
masters
• 3.5-inch Micro Disk Drive for easy free
device library updates
• 18 years of proven excellence in the
manufacture of quality gang and set
programmers
ProgRama Tools
ChipBurner TRACKCels
Features:
• Choose from the largest selection of
TRACKCels to support virtually every
technology on the market today regardless
of packaged type
• Low-cost solution to today's gang/set
programming needs
• Wholly versatile through readily achievable
selective customization
• Mix and match TRACKCels for technology
and package support
• Ultimate expandibility – as requirements
change simply plug in a new TRACKCel
• ElectroSense socket isolation circuitry
• Power failure device protection: a power
failure will not damage device(s) while
installed in TRACKCel
Product Information:
The ChipBurner family of device programmers is wholly
versatile through readily achievable, selective
customization incorporating proprietary “Multi Track”
design. Each TRACKCel supports eight individual
programming sites each. The unlimited expandibility of
this open architecture allows true flexibility by allowing you
to mix and match TRACKCels. This provides a low-cost
solution to today's gang/set programming needs.
Purchase the support you need now, then later simply
plug in another TRACKCel to accommodate future
requirements. The ChipBurner family includes the
following low cost models:
ChipBurner-Gang 8 supports
(1) TRACKCel (to 8 devices)
ChipBurner-Gang 16 supports
(2) TRACKCels (to 16 devices)
ChipBurner-Gang 32 supports
(4) TRACKCels (to 32 devices)
Contact:
ProgRama Tools
3500 NW Boca Raton Blvd.
Bay 501-506
Boca Raton FL 33431
TEL: 800-668-8843
561-338-8843
FAX: 561-338-8447
email: supportprogramatools.com
web:
www.programatools.com/programa.htm
DS00104F-page 4-16
The ChipBurner-Gang 32 is the first production
programmer to support 32 devices at a time with
combinations of four package types or technologies by
supporting four different TRACKCels. The mix n' match
capabilities do not simply end there, the TRACKCels are
even capable of programming these different package
types all with different data, and all at once.These
removable TRACKCels support virtually every technology
on the market today. Choose from the largest selection of
TRACKCels from the world's largest manufacturer of lowcost gang production programmers.
The entire line of TRACKCels employ Electrosense®
socket isolation circuitry which prevents defective devices
from destroying any other device which is being
concurrently programmed. The TRACKCels also feature
high-quality sockets that are mounted directly to the
embedded circuit board, providing absolute mechanical
stability. All products are manufactured and serviced in the
USA.
 2001 Microchip Technology Inc.
ProgRama Tools
Features:
PROMSoft-XD allows you to manage, program, verify,
and even edit your device data straight from your PC.
PROMSoft has finally relieved every program operator of
the many detailed and error prone tasks involved in
programming. Flexibility and ease-of-use were primary
goals in the development of PROMSoft-XD.
Statistical data is readily available to the user. The devices
can be numbered. They can be coded for a specific
project and statistical data is available to track your
progress and ensure high throughput.
4
Gang
Programmers
The PROMSoft database of device support can be easily
updated at the same time you wish to update the device
support to your Multi programmer. Supporting 18 different
formats, including JEDEC, Intel®, DATA/IO® BINARY and
Motorola®. The software is client/server and easily
networkable allowing access to data files residing on any
server. Free and unlimited technical support is available
via the Internet, hotline, or fax and the Tech Support
Group is always available to answer any questions you
may have.
4
Gang
Programmers
The interface is human-centered and so intuitive that a
few clicks on the menu is all that is necessary to enhance
the quality and efficiency of your device programming
workstation. First-time users and novices will find the
PROMSoft-XD manual to be a gentle introduction to gang
and set programming, how to get things started and how
to get (and stay) on friendly terms with your machine.
Step-by-step instructions and fun and easy on-line
tutorials, written in plain English, allows users to program
their first devices in minutes.
4
Gang
Programmers
• First Microsoft Windows-based interface
for device programmers
• ChipBurner can be hooked to a host PC
for full automated production workstation
• See your programming setup at a glance
• F1 context-sensitive help screens
guarantee both ease of use and constant
programming accuracy
• Advanced editing features in both HEX
and ASCII
• Operates in any Microsoft Windows
environment
• Free and unlimited technical support is
available via the Web, telephone or fax and
technical support group is always available
to answer any questions you may have
PROMSoft-XD is the first Microsoft Window-based user
interface for device programmers. Now you can finally see
your entire programming setup at a glance. You can finally
maximize your productivity using an easy access menu
system by simply pointing and clicking. Your programmer
can now be hooked to a PC for automated volume
production creating a complete and easy-to-use
programming workstation. You can also manage your
device data by simply storing it on your PC. The “F1”
context sensitive help screens and on screen error
reporting features ensure ease of use and constant
programming accuracy.
Gang
Programmers
ChipBurner PROMSoft-XD/
Microsoft® Windows®
4
Product information:
Contact:
ProgRama Tools
4
 2001 Microchip Technology Inc.
Gang
Programmers
3500 NW Boca Raton Blvd.
Bay 501-506
Boca Raton FL 33431
TEL: 800-668-8843
561-338-8843
FAX: 561-338-8447
email: supportprogramatools.com
web:
www.programatools.com/programa.htm
DS00104F-page 4-17
ProgRama Tools
ChipBurner-Portable
Features:
• Handheld battery packed device
programmer
• Supports EPROMS, EEPROMS, FLASH,
PICmicros® microcontroller (MCUs)
• Supports DIP, PLCC, PSOP/SOIC, TSOP,
and PCMCIA Memory Cards
• Built-in Dip package support for 8, 24,
28, 32, 40, 42, 44, and 48 pins
• Built-in PLCC package support for
28 and 32 pins
• Unparalleled 8 Mbit RAM is standard
(Expandable to 64 Mbit)
• Revolutionary built-in PCMCIA card allows
storage of all your master device library
files for true field portability
• Measures only 8-inches x 4.2-inches x
1-inch, yet faster than all other handheld
units or your money back
Product Information:
ProgRama Tools has brought your biggest ideas and
programming needs down to size as well as provided
solutions for the hottest, smartest, most portable
applications in device programming. The ChipburnerPortable is a revolutionary nextwave, handheld
programmer offering much more than the programming
industry's initial focus on the “Wow” or the “Egad” of the
first generation of the handheld's tiny size. It's sharp focus
on integration of digital technological innovations within
the size, power, speed, accuracy and cost constraints of
handheld systems has resulted in rendering any other
handheld unit completely and utterly obsolete. But don't
just take our word for it. Make your own analysis and you
too will quickly see for yourself that what sets ProgRama
apart from its competitors is that we understand that the
point is to think big, then to think really, really small. Here's
the proof!
Contact:
ProgRama Tools
3500 NW Boca Raton Blvd.
Bay 501-506
Boca Raton FL 33431
TEL: 800-668-8843
561-338-8843
FAX: 561-338-8447
email: supportprogramatools.com
web:
www.programatools.com/programa.htm
DS00104F-page 4-18
The ChipBurner-P operates as a field portable standalone workstation. It can operate with a rechargeable
battery pack for full field portability, or plugged into any
outlet. The ChipBurner-P can also just as easily be
hooked to any PC for full volume production using the
industry's first Microsoft® Windows®-based interface for
device programmers – PROMSoft-XD®. A few clicks on
the menu screen is all that is necessary to allow the user
to operate his ChipBurner-P in a true Microsoft Windows
environment and guarantee accuracy. PROMSoft -XD
runs under any Microsoft Windows operating environment
and allows the user the capability of seeing his entire
programming setup at a glance.
 2001 Microchip Technology Inc.
4
Gang
Programmers
RASTEME
System Co., Ltd.
PIM/10A
The Gang Programmer for the
PIC16C5X Microcontroller (MCU) Family
Features:
4
Product information
Reliability increases with the device more because it can
be set up freely within the range of the minimum voltage
of each device and the maximum voltage.
The support devices:
Contact
PIC16C52, PIC16C54, PIC16LC54, PIC16C54A,
PIC16LC54A, PIC16C56, PIC16LC56, PIC16C58A,
PIC16LC58A, PIC16C55, PIC16LC55, PIC16C57 and
PIC16LC57
RASTEME SYSTEMS Co.,Ltd.
Tokyo Office
Titibu electric Building 4F
3-12-15 Sotokanda Tiyoda-Ku
Tokyo 101-0021 Japan
TEL: (81)3-3257-6055
FAX: (81)3-3257-6057
email: inquiry@mail.rasteme.co.jp
web: www.rasteme.co.jp
4
Gang
Programmers
 2001 Microchip Technology Inc.
4
Gang
Programmers
Office
886-2 Nihongi Nakago-Mura
Nakakubiki-Gun Niigata
949-2304 Japan
TEL: (81)255-74-4124
FAX: (81)255-74-2439
4
Gang
Programmers
PIM/10A is a gang programmer for the PIC16C5X. After
data is read from the master device, 10 devices can be
programmed by clicking one at a time. Devices can be
blank checked and verified. After the data on the device is
read, the existence of the code protection can be chosen.
Serialization of the device can be accomplished through
an attached RS-232C port.
Gang
Programmers
• Program, blank check, verify functions
• The code protection can be chosen
• Stand-alone control
(download from master device)
• PC Host Mode-IBM® and NEC 98
compatibility
• Can write 10 devices at once
• One touch programming
• Serialization capability in PC Host Mode
• 12V DC, 2.0A power supply
• Contour dimension 270 × 155 × 50
DS00104F-page 4-19
RASTEME
System Co., Ltd.
PIM/10B
The Gang Programmer for the
PIC16C6X and PIC16C7X Microcontroller
(MCU) Families
Features:
• Program, blank check, verify functions
• The code protection can be chosen
• Stand-alone control
(download from master device)
• PC Host Mode-IBM® and NEC 98
compatibility
• Can write 10 devices at once
• One touch programming
• Serialization capability in PC Host Mode
• 12V DC, 2.0A power supply
• Contour dimension 270 × 155 × 50
Product information
PIM/10B is a gang programmer for the PIC16C6X and
PIC16C7X. After data is read from the master device, 10
devices can be programmed by clicking one at a time.
Devices can be blank checked and verified. After the data
on the device is read, the existence of the code protection
can be chosen. Serialization of the device can be
accomplished through an attached RS-232C port.
Reliability increases with the device more because it can
be set up freely within the range of the minimum voltage of
each device and the maximum voltage.
The support devices:
Contact
RASTEME SYSTEMS Co.,Ltd.
Office
886-2 Nihongi Nakago-Mura
Nakakubiki-Gun
Niigata 949-2304 Japan
TEL: (81)255-74-4124
FAX:(81)255-74-2439
PIC16C554, PIC16C556, PIC16C558, PIC16C61,
PIC16C62, PIC16C62A, PIC16C620, PIC16C621,
PIC16C63, PIC16C64, PIC16C64A, PIC16C65,
PIC16C65A, PIC16C70, PIC16C71, PIC16C71A,
PIC16C710, PIC16C711, PIC16C72, PIC16C73,
PIC16C73A, PIC16C74, PIC16C74A, PIC16C84,
PIC16LC84, PIC16F84 and PIC16LF84
Tokyo Office
Titibu electric Building 4F
3-12-15 Sotokanda Tiyoda-Ku Tokyo
101-0021 Japan
TEL: (81)3-3257-6055
FAX: (81)3-3257-6057
email: inquiry@mail.rasteme.co.jp
web: www.rasteme.co.jp
DS00104F-page 4-20
 2001 Microchip Technology Inc.
4
Stag Programmers Ltd.
Gang
Programmers
Stag P803
Features:
Stag Programmers Ltd.
Stag Programmers Inc.
The Stag P803 is the fastest known gang/set programmer
with up to 16 devices in gang. Its FLASH memory stores
algorithms which can be easily upgraded via the I/O ports
and the CPU is a powerful 32-bit embedded RISC
Microcontroller running at 24 MIPS giving high
performance programming never encountered before.
The RAM is easily upgradable from the standard 4 Mbytes
(32 Mbits) to 8 Mbytes (64 Mbits) or 16 Mbytes (128 Mbits)
by adding SIMMs.
High-speed data transfer is achieved by using an RS-232
serial port with baud rate selection from 1200 to 115 kbps
(XON/XOFF) and (RTS/CTS) and an IEEE 1284 parallel
port giving enhanced bidirectional communication. The
Stag P803 can operate as remote or stand-alone and
while in remote all the functions of the programmer can be
controlled from the computer.
The Stag P803 supports EPROMs, EEPROMs, Serial
EPROMs, FLASH and Microcontrollers in all package
types with no adaptors required – DIP, PLCC, PSOP and
TSOP.
The Stag P803 supports Microchip Technology
PIC12CXXX, PIC16C5X, PIC16C6X, PIC16C62X,
PIC16C7XX, PIC16F87X, PIC17CXXX microcontrollers
and also, 93LCXX and 24LCXX Non-Volatile memory
products.
7451 Topanga Canyon Blvd.
Canoga Park, CA 91303
TEL: (888) 700-STAG (7824)
(818) 587-3434 (International)
FAX: (818) 587-3433
email: sales@stagusa.com
web: www.stagusa.com
4
4
Gang
Programmers
 2001 Microchip Technology Inc.
4
Gang
Programmers
Silver Court, Watchmead
Welwyn Garden City
Herts AL7 1LT
England
TEL: +44 (0) 1707 332148
FAX: +44 (0) 1707 371509
email: sales@stag.co.uk
web: www.stag.co.uk
Product Information:
Gang
Programmers
Contact:
4
Gang
Programmers
• Fastest known Gang/Set Programmer,
very fast programming with high
performance prechecks and post
programming tests
• Fast downloads via RS-232/high-speed
IEEE 1284 parallel port
• Programs to manufacturer's certified
algorithms
• Flexible modular concept allows easy
expansion up to 84 pins
• Mix or match modules to configure
programmer to production requirements
• Modules provide reliable device contact –
no adaptors required
• Modules can be changed quickly and
easily
DS00104F-page 4-21
Sunrise
Electronics, Inc.
T-1600
Gang Programmer
Features:
• Programs 16 at once in the
same or set mode
• One – four masters or data blocks
simultaneously
• Supports any programmable device of any
package configuration or number of pins
• Supports all Microchip Technology
microcontrollers and memory devices
• Programs in fastest time allowed by
Microchip Technology algorithms
• User friendly, easy-to-use and understand
menu-driven software
• Unlimited memory using PC
• Free technical support for life of equipment
via telephone or at the
Sunrise facility
• Free software upgrades 24 hours a day
seven days a week via BBS
• Manufactured and supported in the
United States of America
Product Information:
Since 1977 Sunrise Electronics, Inc. has been the leader
in Universal, Gang and In-Circuit Programming Systems.
The T-1600 represents the latest in gang programmers
having the capacity to do 16 MEG devices of any type
including Microcontrollers, FPGA, EPROM, EEPROM,
PLD, EPLD, PEEL and PGA. Only the manufacturer’s
approved algorithms are used. No short cut programming
ever!
Operation from the PC or stand-alone mode allows the
fastest and most accurate programming of any type
device. The user interface is a menu-driven, easy-to-use
format. In less than one minute, the user is ready to
program the device of their choice.
The T-1600 is compatible with any media, whether it be
LAN, WAN or other. It supports any type file format
including JEDEC and HEX.
The T-series has established a long history of high
reliability. Using all SMT electronics and state-of-the-art
design, the T-series represents the most flexible and
reliable programming system available.
Contact:
Sunrise Electronics, Inc.
675 Brea Canyon Road, #6
Walnut, CA 91789
TEL: (909) 595-7774
FAX: (909) 594-7009
BBS: (909) 594-6610
email: sales@sunriseelectronics.com
web: www.sunriseelectronics.com
DS00104F-page 4-22
 2001 Microchip Technology Inc.
T-2000
Programming System
Features:
Since 1977 Sunrise Electronics, Inc. has produced the
most cost effective and reliable Gang, Gang/Set and
In-Circuit Programming Systems.
The T-2000 represents the latest technology in multiple
purpose programming systems having the capacity to
program devices of any type, or combination of devices,
including microcontrollers, FPGA, EPROM, EEPROM,
FLASH, PLD, EPLD, PEEL and PGA. Only the
manufacturer’s approved algorithms are used. No short
cut programming ever! Up to eight (8) devices can be gang
programmed, programmed in sets OR the system
programs a single circuit board. An infinite number of
different circuit boards may be programmed using
different adapters.
Operation from the PC allows the fastest and most
accurate programming. The user interface is a menudriven, easy-to-use format. In less than one minute, the
user is ready to program.
The T-2000 is compatible with any media whether it be
LAN, WAN or other. It supports any type file format
including JEDEC and HEX.
Call Sunrise for technical consultation at no charge.
4
Gang
Programmers
The Sunrise T-series programmers have established a
long history of high reliability. Using all SMT electronics
and state-of-the-art design, the T-series represents the
most flexible and reliable programming systems available.
4
Gang
Programmers
• The most flexible programmer
in the industry
• Supports multiple programmable devices
of any package configuration or number of
pins in Gang, Gang/Set or In-Circuit single
board programming
• Obsolescence proof
• Supports all Microchip Technology
Microcontroller (MCUs) and memory
devices; up to eight devices or one circuit
board
• Can serialize microcontrollers while
programming
• Programs in fastest time allowed by
manufacturers algorithms
• User-friendly, easy-to-use and understand
menu-driven software
• Unlimited memory using PC
• Free technical support for life of
equipment via telephone or at the
Sunrise facility
• Free training at Sunrise
• SMT construction for long reliable life
• Manufactured and supported in the
United States of America
4
Product Information:
Gang
Programmers
Sunrise
Electronics, Inc.
4
Gang
Programmers
4
Contact:
Gang
Programmers
Sunrise Electronics, Inc.
675 Brea Canyon Road, #6
Walnut, CA 91789
TEL: (909) 595-7774
FAX: (909) 594-7009
BBS: (909) 594-6610
email: sales@sunriseelectronics.com
web: www.sunriseelectronics.com
 2001 Microchip Technology Inc.
DS00104F-page 4-23
Sunrise
Electronics, Inc.
T-4000
Programming System
Features:
• The most flexible programmer in the
industry
• Supports multiple programmable devices
of any package configuration or number of
pins in Gang, Gang/Set or In-Circuit
• Obsolescence proof
• Supports all Microchip Technology
Microcontroller (MCUs) and memory
devices; up to 96 devices or up to 64
circuit boards simultaneously
• Can serialize microcontrollers while
programming
• Programs in fastest time allowed by
manufacturers algorithms
• User-friendly, easy-to-use and understand
menu-driven software
• Unlimited memory using PC
• Free technical support for life of equipment
via telephone or at the Sunrise facility
• Free training at Sunrise
• Manufactured and supported in the
United States of America
Product Information:
Since 1977 Sunrise Electronics, Inc. has produced the
most cost effective and reliable Gang, Gang/Set and InCircuit Programming Systems.
The T-4000 represents the latest technology in multipurpose programming systems having the capacity to
program devices of any type, or combination of devices,
including microcontrollers, FPGA, FLASH, EPROM,
EEPROM, PLD, EPLD, PEEL and PGA. Only the
manufacturer’s approved algorithms are used. No short
cut programming ever!
Up to ninety-six (96) devices can be gang programmed,
programmed in sets OR the system programs up to 64
circuit boards simultaneously.
Operation from the PC allows the fastest and most
accurate programming. The user interface is a menudriven, easy-to-use format. In less than one minute, the
user is ready to program.
The T-4000 is compatible with any media whether it be
LAN, WAN or other. It supports any type file format
including JEDEC and HEX.
The Sunrise T-series programmers have established a
long history of high reliability. Using the latest electronic
technology and state-of-the-art design, the T-series
represents the most flexible and reliable programming
systems available.
Call Sunrise for technical consultation at no charge.
Contact:
Sunrise Electronics, Inc.
675 Brea Canyon Road, #6
Walnut, CA 91789
TEL: (909) 595-7774
FAX: (909) 594-7009
BBS: (909) 594-6610
email: sales@sunriseelectronics.com
web: www.sunriseelectronics.com
DS00104F-page 4-24
 2001 Microchip Technology Inc.
T-5000
Programming System
Features:
The T-5000 represents the latest technology in multiple
purpose programming systems having the capacity to
develop software at the device or circuit board level, and
program devices of any type, or combination of devices,
including microcontrollers, FPGA, EPROM, EEPROM,
FLASH, PLD, EPLD, PEEL and PGA. Only the
manufacturer’s approved algorithms are used. No short
cut programming ever!
Up to forty-eight (48) devices can be gang programmed,
programmed in sets OR the system programs up to 32
circuit boards simultaneously.
4
As a PC the system allows R&D programming, debugging
and reprogramming using the fastest and most accurate
programming. The user interface is a menu-driven, easyto-use format. In less than one minute, the user is ready to
program.
The T-5000 MPS is compatible with any media whether it
be LAN, WAN or other. It supports any type file format
including JEDEC and HEX.
Call Sunrise for technical consultation at no charge.
4
Gang
Programmers
The Sunrise T-series programmers have established a
long history of high reliability. Using the latest technology
electronics and state-of-the-art designs, the T-series
represents the most flexible and reliable programming
systems available.
Gang
Programmers
• The most flexible programmer in the
industry. Full PC capability with Pentium®
100 and higher
• Programming power for lab or field use
• Serial and parallel ports, color or
monochrome display and 850
Megabyte PCI Hard Drive
• Supports multiple programmable devices
of any package configuration or number of
pins in Gang, Gang/Set or In-Circuit
• Obsolescence proof
• Supports all Microchip Technology
Microcontroller (MCUs) and memory
devices; up to 48 devices or up to 32 circuit
boards simultaneously
• Programs in fastest time allowed by
manufacturers algorithms
• User-friendly, easy-to-use and understand
menu-driven software
• Unlimited memory using PC
• Free technical support for life of equipment
via telephone or at the Sunrise facility
• Free training at Sunrise
• Manufactured and supported in the
United States of America
4
Product Information:
Gang
Programmers
Sunrise
Electronics, Inc.
4
Gang
Programmers
4
Contact:
Gang
Programmers
Sunrise Electronics, Inc.
675 Brea Canyon Road, #6
Walnut, CA 91789
TEL: (909) 595-7774
FAX: (909) 594-7009
BBS: (909) 594-6610
email: sales@sunriseelectronics.com
web: www.sunriseelectronics.com
 2001 Microchip Technology Inc.
DS00104F-page 4-25
Sunrise
Electronics, Inc.
T-8000
Programming System
Features:
• Most flexible programmer in the industry
• Programs devices either in gang or gang/
set or programs in-circuit at the circuit
board level
• Supports multiple programmable devices
of any package configuration or number of
pins in Gang, Gang/Set or In-Circuit
• Obsolescence proof
• Supports all Microchip Technology
Microcontroller (MCUs) and memory
devices; up to 128 devices or up to
64 circuit boards simultaneously
• Can serialize microcontrollers
• 540 watts of programming power
• Programs in fastest time allowed by
manufacturers’ algorithms
• User-friendly, easy-to-use and understand
menu-driven software.
• Full PC for maximum flexibility
• Unlimited memory using PC
• Free technical support for life of equipment
via telephone or at the Sunrise facility
• Free training at Sunrise
• Manufactured and supported in the
United States of America
Product Information:
Since 1977 Sunrise Electronics, Inc. has produced the
most cost effective and reliable programming systems.
The T-8000 represents the latest technology in multiple
purpose programming systems having the capacity to
program devices of any type, or combination of devices,
including microcontrollers, FPGA, EPROM, EEPROM,
FLASH, PLD, EPLD, PEEL and PGA. Only the
manufacturer’s approved algorithms are used. No short
cut programming ever!
Up to one hundred twenty-eight (128) devices can be
gang programmed, programmed in sets OR the system
programs up to 64 circuit boards simultaneously.
Operation from the PC allows the fastest and most
accurate programming. The user interface is a menudriven, easy-to-use format.
The T-8000 is compatible with any media whether it be
LAN, WAN or other. It supports any type file format
including JEDEC and HEX.
The Sunrise T-series programmers have established a
long history of high reliability. Using the latest electronic
technology and state-of-the-art design, the T-series
represents the most flexible and reliable programming
systems available.
Call Sunrise for technical consultation at no charge.
Contact:
Sunrise Electronics, Inc.
675 Brea Canyon Road, #6
Walnut, CA 91789
TEL: (909) 595-7774
FAX: (909) 594-7009
BBS: (909) 594-6610
email: sales@sunriseelectronics.com
web: www.sunriseelectronics.com
DS00104F-page 4-26
 2001 Microchip Technology Inc.
4
Gang
Programmers
System General
Corporation
Multi-APRO
Asynchronous Programmer
Features:
System General Corp.
 2001 Microchip Technology Inc.
Multi-APRO is based on a 48 Universal Pin-Driver
architecture and is the ideal tool for design or
manufacturing when working with programmable devices.
The system can be configured with a single socket for
R&D and then expanded as the application turns to
production. All package styles are supported including
DIP, PLCC, SOIC, SSOP, TSOP, QFP, TQFP and PGA.
As many as eight modules can be linked to one controller
so that programming can occur eight-at-a time
asynchronously! As well, kitting is facilitated since each
module can be configured for a different device, even
different package style. Device-specific algorithms are
stored in the computer and on FLASH (PCMCIA) card for
firmware. Remote operation is via RS-232 (115 kbps) or
parallel port for the ultimate in flexibility. Mouse-driven
software allows for easy-to-apply engineering/editing
features.
Use of only approved algorithms assures optimum yields,
and SG’s patented “Auto-Mapping” technology provides
for the industry’s fastest programming times and therefore
highest throughput. Easy-to-use engineering features
allow for convenient editing of data. Additional capabilities
include swap-shuffle-split and even serialization! Optional
High/Low VCC verify can help insure board-level reliability.
All configuration modes are supported. Compatible with
Microchip Technology’s proprietary checksum generating
method.
Default operation = Blank-check/Program/Verify...
Selectively disabled.
DS00104F-page 4-27
4
4
4
Gang
Programmers
3F, No.1, Alley 8, Lane 45
Bao Shing Road, Shin Dian
Taipei, Taiwan
TEL: 886-2-2917-3005
FAX: 886-2-2911-1283
System General’s Multi-APRO is an extremely advanced
programming system for processing Microchip
Technology PICmicro microcontrollers (MCUs) for
engineering or production. Support for all package styles
and component families is comprehensive and ongoing.
Gang
Programmers
1603A S. Main Street
Milpitas, CA 95035
TEL: (800) 967-4776
(408) 263-6667
FAX: (408) 262-9220
BBS: (408) 262-6438
email: sga@inreach.com
web: www.sg.com.tw
Product Information:
Gang
Programmers
Contact:
4
Gang
Programmers
• Supports the entire PICmicro® MCU family
and derivatives, and PIC12CXXX
• Supports EPROM, EEPROM, FLASH,
EPLD, CPLD, PAL, GAL, FPGA (Including
Anti-Fuse) from all manufacturers
• Fastest possible programming times and
highest possible yields
• Engineering/production
universal programmer
• Innovative independent-socket technology
• Operates stand-alone or via Windows®style PC control software (included)
• Optional “jobs-management”
production software
• 8 Megabit RAM standard (per module)
• Upgradable to 64 Megabit.
• Supports 8-Bit and 16-Bit MCUs
• Software updates via 24-hr. BBS
• One year HW warranty
System General
Corporation
Turpro-848 Gang
Programmer
• Gang Programmers supporting EPROM/
EEPROM/FLASH/Microcontrollers
• Two Embedded CPU and Turbo Mapping
Technology
• Socket adapter for DIP, PLCC, PSOP,
TSOP, VSOP and other device packages
• Adapter support for PIC12C508,
PIC16C54, PIC16C, PIC16C55,
PIC16C56, PIC16C57, PIC16C84 on DIP
package
• Adapter support for PIC16C6XX and
PIC16C7X on DIP package
• Supporting 5.0V, 3.3V, 3.0V, 2.7V, 1.5V
low-voltage device
• Control Mode: stand-alone operation and
computer remote control
• Device Insertion Check: backward device
check, device inserted position check
• Free software updates through Web site.
Product Information:
Turpro-848 Gang System Programmer with quality
ensured by ISO9001 certification, this system comes with
complete device supports for EPROM, EEPROM and
FLASH EPROM. It also programs 87/89 series MPU and
Microchip Technology PICmicro® microcontroller (MCU)
devices up to eight pieces at a time.
Turpro-848 also has the socket adapter to match DIP,
PLCC, TSOP, PSOP, VSOP or other packages. And the
Turpro-848 uses a dedicated CPLD on each socket for
circuitry isolation. As such, a programming failure on one
socket will not affect the programming on others. In
addition, a proprietary mapping technology controlled by
an advanced dual CPU system ensures accurate pulse
width and fast programming speed on each socket.
Turpro-848 has all the features designed to fit your
production requirement. It can be operated as a standalone unit or can interface with a PC under DOS™ or
Windows® environment for remote operations. An optional
parallel interface is available to facilitate high-speed file
downloading. The Marginal Test allows you to verify the
programmed devices against a user-defined voltage
range and disqualify marginal devices before they reach
the board level. The unique “Auto-Sense” function will
sense the inserted device and program the device without
touching any key. To update the system, simply reprogram
the embedded FLASH device. The updates are free!
Contact:
System General Corp.
1603A S. Main Street
Milpitas, CA 95035
TEL: (800) 967-4776
(408) 263-6667
FAX: (408) 262-9220
BBS: (408) 262-6438
email: sga@inreach.com
web: www.sg.com.tw
3F, No.1, Alley 8, Lane 45
Bao Shing Road, Shin Dian
Taipei, Taiwan
TEL: 886-2-2917-3005
FAX: 886-2-2911-1283
DS00104F-page 4-28
 2001 Microchip Technology Inc.
4
Gang
Programmers
Unitec Electronics
Company Ltd.
Pim/10A
Features:
4
Product Information:
This product is a programmer for Microchip Technology
PIC16C54, PIC16C55, PIC16C56 and PIC16C57
EPROM microcontrollers. Capable of programming up to
10 devices at once, with or without code protection.
4
Gang
Programmers
Contact:
Unitec Electronics Co., Ltd.
Office:
886-2, Nihongi, Nakago-Mura,
Nakakubiki-Gun, Niigata 949-23
Japan
TEL: (81) 255 74-4124
FAX: (81) 255 72-4114
4
Gang
Programmers
Tokyo Office:
Mitinoku Building 4F
4- 9, Kanda Sakuma-Cho,
Chiyoda-Ku, Tokyo 101
Japan
TEL: (81) 3 3863-8411
FAX: (81) 3 3863-8413
 2001 Microchip Technology Inc.
4
Gang
Programmers
Data to be programmed is typically READ from a single
master device. In addition to reading and programming the
device, it can also perform blank checks and code
verifications. Blank check plus programming followed by
verification can all be performed in a single keystroke. The
display allows for easy identification of programmer
operation and any error conditions. Additionally, each
programming socket has its own red LED to clearly show
which, if any device did not program properly. In Host
Mode (RS-232C), additional functions include
microcontroller serialization, program code upload/
download, as well as programming pass/fail counters.
Gang
Programmers
• Can write 10 devices at once
• Programs all four PIC16C54, PIC16C55,
PIC16C56 and PIC16C57 devices
• One-touch programming
• Ten 28-pin DIP socket
(18- to 28-pin devices)
• 20 x 2 Liquid Crystal Display
• Code protect selection capability
• 12V DC, 2.0A power supply
• Stand-alone capability
(download from master device)
• PC Host Mode-IBM® and NEC98
compatibility
• Serialization capability in Host Mode
• Can Verify VDD voltage from
2.0V (VDD_MIN) to 6.5V (VDD_MAX)
DS00104F-page 4-29
Unitec Electronics
Company, Ltd.
Pim/10B
Features:
• Can write 10 devices at once
• Programs all ten PIC16C61, PIC16C62,
PIC16C64, PIC16C65, PIC16C71,
PIC16C73, PIC16C74 PIC16C620,
PIC16C621 and PIC16C622 devices
• One-touch programming
• Ten 40-pin DIP socket
(28- to 40-pin devices)
• 20 x 2 Liquid Crystal Display
• Code protect selection capability
• 12V DC, 2.0A power supply
• Stand-alone capability
(download from master device)
• PC Host Mode-IBM® and NEC98
compatibility
• Serialization capability in Host Mode
• Can Verify VDD voltage from
2.0V (VDD_MIN) to 6.5V (VDD_MAX)
Product Information:
This product is a programmer for Microchip Technology
PIC16C61, PIC16C62, PIC16C64, PIC16C65, PIC16C71,
PIC16C73, PIC16C74 PIC16C620, PIC16C621 and
PIC16C622 EPROM/PROM microcontrollers. PIM/10B is
capable of programming up to 10 devices at once, with or
without code protection.
Data to be programmed is typically READ from a single
master device. In addition to reading and programming the
device, it can also perform blank checks and code
verifications. Blank check plus programming followed by
verification can all be performed in a single keystroke. The
display allows for easy identification of programmer
operation and any error conditions. Additionally, each
programming socket has its own red LED to clearly show
which, if any device did not program properly. In Host
Mode (RS-232C), additional functions include
microcontroller serialization, program code upload/
download, as well as programming pass/fail counters.
Contact:
Unitec Electronics Co., Ltd.
Office:
886-2, Nihongi, Nakago-Mura
Nakakubiki-Gun, Niigata 949-23
Japan
TEL: (81) 255 74-4124
FAX: (81) 255 72-4114
Tokyo Office:
Mitinoku Building 4F
4- 9, Kanda Sakuma-Cho,
Chiyoda-Ku, Tokyo 101
Japan
TEL: (81) 3 3863-8411
FAX: (81) 3 3863-8413
DS00104F-page 4-30
 2001 Microchip Technology Inc.