Lollipop Lamp

Part # LS-LOLLIPOP

Assembly Instructions

Instrucciones De Asamblea

Instructions d’Assemblée

January 2009

E

C

Plate

D

B

A

Base

1. Insert pole A into base. Screw to secure.

2. Screw poles A, B, and C together.

You may need to gently pull the cord through from the base. Be careful not to damage the cord when pulling through-(pull straight from opening).

3. Screw plate into pole C. You will need to carefully pull the cord through the base in order to complete this step.

4. Insert a light bulb.

To Secure the Shade:

5. Loosen the 3 Caps (D) under the plate.

Do not completely remove the caps.

6. Slide the 3 brackets (E) toward the bulb.

7. Carefully set the glass shade inside the plate’s groove. Do not force the glass if your brackets are not in the correct position.

8. Slide the 3 brackets (E) all the way to outside, and secure the 3 caps (D).