Magnadyne RV-DOCK User manual
Add to my manuals2 Pages
Magnadyne RV-DOCK allows you to perfectly fit any model of iPod with a dock connector into a single RV-DOCK through the use of Interchangeable Dock Adapters. The RV-DOCK can be installed vertically or horizontally using either surface or dash mount, allowing you to choose the mounting location that provides easy access for the user. The dock housing can be connected to any cable with a connector, making it compatible with a wide range of audio systems.
advertisement
Model: RV-DOCK
Installation and User Manual
Any model of IPOD with a dock connector can fit perfectly into a single RV-DOCK through the use of Interchangeable Dock Adapters and an Insert. Dock Housing connects to any cable with a connector.
Installation
The RV-DOCK has 2-way mounting capability: Surface or Dash mount. The housing can be installed vertically or horizontally.
Choose a mounting location that provides easy access for the user.
Front
To p
Dash Mounting:
1. Use the enclosed RV-DOCK-TEMPLATE to mark where you want to mount the Docking Station.
Note 1: Make sure there is enough room behind the dash to mount the Dock Housing.
Note 2: When cutting the hole into the dash make sure there are no cables or wires that can be accidentally cut.
2. Secure the Dash-Mount Housing to the Dock Housing using the supplied screws.
3. Secure the Dock Housing to the dash using the supplied mounting screws.
4. Snap-on the Bezel.
5. Attach the connector to the bottom of the housing.
Vertical Mount Horizontal Mount
Surface Mounting:
1. Secure the Dock Housing in place by using the supplied mounting screws.
2. Attach the IPOD connector to the bottom of the housing.
Mounting Screws
(supplied)
4. Snap-on Bezel
3. Mounting Screws
(supplied)
Dash-Mount
Housing
2. Housing Screws
(supplied)
Dock Housing
1. Hole in Dash
Dock Housing
Connector Cable (not supplied)
5. Connector Cable
(not supplied)
Installation and User Manual
Model: RV-DOCK
Adapters and Insert
Use the diagram below to choose the Adapter/Insert that fits your player. Identify the adapters by the labels on the back of the adapter housing.
Inserting Adapter
Push the release lever, then insert adapter into housing
MENU
MENU
MENU
NANO (Gen 2)
Adapter
NANO (Gen 3)
Adapter
Classic
Adapter
MENU
NANO
(Gen 4)
Adapter
ITOUCH
Insert with
ITOUCH
Side
Facing
Out
Insert with
IPHONE
Side
Facing
Out
Place insert toward back of adapter.
Then insert ITOUCH or IPHONE
IPHONE
Changing Adapter
Push the release lever, then remove adapter from housing
Cover
When not in use place cover on dash mounted docking station to keep out dirt and moisture.
Classic
Adapter
Classic
Adapter
© 2010 Copyright Magnadyne Corporation
Patent Pending
Classic
Adapter
RV-DOCK-INS Rev. A 8-6-10
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project