Satisfy Professional's Needs
Cordless Percussion Driver Drill
13mm (1/2") BHP442
BHP452
MORE POWER
LESS WEIGHT
Compact and Lightweight Design
Provides more control and maneuverability.
Compact : 215mm
Mechanical 2-Speed
Gearing
Single Sleeve
Keyless Chuck
Enables easy bit
installation / removal
with one hand.
High Power-to-Weight
Ratio Obtained by
Employing 4-Pole Motor
All Metal Gear Construction
Ensures high transmission durability.
LED Job Light with
Afterglow Function
N
S
S
N
Light can be turned on
before tool starts by
pulling the trigger slightly.
Ergonomically Designed
Handle with rubberized
soft grip
Variable Speed Control by Trigger
Provides more comfort and
control while minimizing
hand fatigue and pain.
Bit Holder
Fits into the protrusion
at the tool foot on
either right or left side.
(optional accessory)
Belt Clip
Photo: BHP452
Comparison of Performance
Numbers
in theItcharts
below
are relative
values
when the capacity of Makita BHP450, BHP440 model
Note:
may differ
dif
fer under
some
conditions.
is indexed at 100.
Note: 1. The test tools were powered by BL1830.
2. The test results depend to a great extent on the hardness of the material, etc.
BHP442: Powered by
3.0Ah Li-ion Battery BL1430
BHP452: Powered by
3.0Ah Li-ion Battery BL1830
1.5Ah Li-ion Battery BL1815
(optional accessory)
Test conditions: Drilled holes in mortar
with 8mm (5/16) diameter to a depth of 40mm (1-9/16")
Makita
BHP452
Fast Charger
DC18RA
Charging time
BL1430, BL1830: 22minutes
BL1815: 15minutes
Makita
BHP450
BHP452
Reversing
Mechanical 2-Speed
Electric Brake
Keyless Chuck
Torque Setting 16
Carrying Case
Built-in Job Light
BHP442
90
Makita
BHP442
115
Makita
BHP440
100
slow
Cordless Percussion Driver Drill
Variable Speed
115
Test conditions: Drilled holes in mortar
with 8mm (5/16) diameter to a depth of 40mm (1-9/16")
100
110 fast
100
slow
BHP442 / BHP452
90
100
13mm (1/2")
BHP442
13mm (1/2")
Capacity
Steel :
38mm (1-1/2")
Wood :
Masonry : 13mm (1/2")
0-21,000 / 0-6,000
Impacts per minute (ipm) Hi / Lo :
0-1,400 / 0-400
No load speed (rpm)
Hi / Lo :
Max. fastening torque Hard / Soft : 44 / 30N.m
215 x 78 x 249mm
Dimensions
( 8-1/2"x 3-1/16"x 9-3/4")
(L x W x H)
1.7kg (3.7lbs)
Net weight
14.4V
Voltage
110 fast
440
BHP452
13mm (1/2")
38mm (1-1/2")
13mm (1/2")
0-22,500 / 0-6,000
0-1,500 / 0-400
50 / 32N.m
215 x 78 x 251mm*
( 8-1/2"x 3-1/16"x 9-7/8")
1.8kg (3.9lbs) *
18V
*with BL1830
Standard Equipment Fast Charger, Battery Cartridge, (+)(-) Bit
Items of standard equipment and specifications may differ by country or area.
Makita Corporation
3-11-8 Sumiyoshi-cho, Anjo, Aichi, 446-8502 Japan
PRINTED IN JAPAN Z23338-2 2007-09