Makita Lithium-ion BDF451RFE User's Manual

Lithium-ion range 2009
Tough tools for professionals
Satisfying the professional’s needs
The quickest, lightest and most powerful battery technology.
Makita presents the evolut-ion of a battery and charging system with the industry dominating
Makita Li-ion technology. The expanded range offers a comprehensive, faster, lighter, more
powerful and longer lasting selection of tough professional cordless tools.
www.makitauk.com
A
The Makita power tool range is a blend
of tried and trusted products, together with
some valuable innovations, carefully selected
for the demanding needs of professional users.
RANGE CATALOGUE
valid from January 2009
New innovations such as Makita’s ground
breaking AVT and the innovative Lithium-ion
battery technology are just a few of the
technologies that have kept Makita the
preferred choice of the professional.
MAKITA UK LTD. Michigan Drive, Tongwell, Milton Keynes. MK15 8JD.
TEL: 01908 211678 FAX: 01908 211400 www.makitauk.com
18v SDS+ Rotary hammer drills
18v Combis
18v Drill drivers
18v Angle drills
18v Impact drivers
18v Angle impact driver
18v Impact wrenches
18v Auto-feed screwdrivers
18v Stapler
18v Circular saws
18v Metal cutting saw
18v 115mm Angle grinder
18v Reciprocating saws
18v Jigsaw
18v Portable band saw
18v Nibbler
18v Vibrating poker
18v Chainsaw
18v Blower
18v Cordless torch
18v Combi kits
Site radio
14.4v SDS+ hammer drill
14.4v Combis
14.4v Drill drivers
14.4v Angle drills
14.4v Impact drivers
14.4v Angle impact driver
14.4v Auto-feed screwdriver
14.4v Stapler
14.4v Pin nailer
14.4v Circular saw
14.4v 115mm Angle grinder
14.4v Jigsaw
14.4v Chainsaw
14.4v Blower
14.4v Cordless torch
10.8v Drill drivers
10.8v Impact driver
7.2v In-line drill drivers
7.2v In-line impact driver
7.2v Cordless gas nailer
Accessories
5
6
7
8
8
9
9
10
11
11
12
12
13
13
14
14
14
15
15
15
16
17
18
18
19
20
21
21
22
22
23
23
23
24
24
24
25
26
26
27
27
28
29
www.makitauk.com
1
Variable speed trigger
Electronic power control
Forward / reverse rotation
2 mechanical gears
3 mechanical gears
Electronic brake
Optimum Charging
40% LIGHTER
System
2000+ CYCLES
ACTIVE
430% MORE RUN TIME
22 MINUTE CHARGE TIME <CONTROLS>
CURRENT VOLTAGE
Key-less chuck
Dust collecting
SDS plus shank
16
Torque settings
Torque limiter
T
Tool-less blade change
Orbital cutting
Job light
Carry case included
It is recommended that safety equipment
such as eye and ear protection is used
when operating powertools.
Makita reserve the right to change specifications
at any time owing to their policy of constant
improvement.
Accessories shown are not necessarily supplied
as standard equipment.
Subject to availability. E&OE.
All machines in this catalogue
conform to CE Marking Regulations.
Makita are a member of the
European Power Tool Association.
2
Customer care: 01908 211678
THERMAL
A REVOLUTIONARY
BATTERY TECHNOLOGY
Makita’s Lithium-ion tools have proved
market winners and now Makita’s
expanded range offers a comprehensive,
powerful and lightweight selection of
professional tools to complete any job.
The long-lasting Lithium-ion batteries are
40% lighter than a similar Nickel Metal
Hydride (Ni-MH) battery. Lithium-ion
batteries feature a high energy density
technology that will deliver 430% more
working capacity during the lifetime
of this battery compared to traditional
Ni-Cad batteries. Lithium-ion batteries
have an extended length of time during
which they hold their charge – even after
a long period of storage the batteries will
deliver their power.
MORE POWER LESS WEIGHT
AIR FLOW AROUND THE BATTERY
Lithium-ion’s weight saving
means 18 volt power can
be obtained by a battery
that weighs the same as a
12 volt Ni-MH battery. Reducing weight whilst
retaining power has obvious positive effects
on operator fatigue.
For optimum efficiency battery
cells need to be kept at a cool
temperature during
charging.
CYCLES
To enable each cell in the battery
to be cooled the unit needs to be designed
in such a way that air flow around the battery
is maximised. Unlike some other Lithium-ion
battery types the Makita battery design
allows each cell to be kept at an optimum
temperature which extends the battery life.
EXTENDED BATTERY LIFE
Lithium-ion batteries have greater
life spans than their Ni-MH or
Ni-Cad counterparts this is due to
the increased number of charging
cycles Lithium-ion offers and the run time
between charges.
2000+
Unbalanced cooling will give rise to cells
who’s capacities vary and discharge at
different rates, this can result in a battery
that has a reduced run time, cycle life
and capacity.
2000
CYCLES
2000+ CYCLES TESTED UNDER LOAD
2000
CYCLES
Makita Lithium-ion batteries have
1300
balanced cooling = LONG LIFE.
CYCLES
Makita have obtained the cycle
life figure of 2000+ by testing the
Lithium-ion 18v 3.0Ah battery
under load. 50mm tapping screws
were screwed into standard pine, replicating
actual use conditions.
Hot
430%
RUN TIME
200%
RUN TIME
300%
RUN TIME
OPTIMUM CHARGING
Makita can achieve the massive
2000+ cycles from their Lithium-ion
batteries because of the Optimum
Charging System. This unique
system enables the battery and
charging system to talk to each other via a
built in CPU in the charger and CPU in the
battery. These two key elements are vital in
extending the batteries working life.
200%
RUN TIME
Cool
Unbalanced cooling = SHORT LIFE.
40%
LESS WEIGHT
35%
LESS WEIGHT
Hot
40%
LESS WEIGHT
25%
LESS WEIGHT
Out of air flow
Through this two way communication
between charger and battery, the charger
can recognise the battery and recall its
charging history, analyse the batteries
condition and usage and charge the
battery accordingly.
Cool
Without cooling = SHORT LIFE.
22min
CHARGE TIME
60min
CHARGE TIME
45min
CHARGE TIME
60min
Hot
CHARGE TIME
Enclosed cell
Cool
www.makitauk.com
3
COMPARISON CHARTS
4
CHARGING CYCLES PER BATTERY
Makita 18V Li-ion 3.0Ah
2000+
Competitor A 18V Li-ion 2.0Ah
2000
Competitor B 18V Li-ion 2.6Ah
1000
Competitor C 18V Li-ion 3.0Ah
1300
Competitor D 18V Li-ion 3.0Ah
No published data
0
500
1000
CYCLES
1500
2000
1 charge = 1 cycle.
Manufacturer data taken from published material.
RUN TIME OF BATTERY
Makita 18V Li-ion 3.0Ah
430%
Competitor A 18V Li-ion 2.0Ah
200%
Competitor B 18V Li-ion 2.6Ah
400%
Competitor C 18V Li-ion 3.0Ah
300%
Competitor D 18V Li-ion 3.0Ah
200%
0
100
200
PERCENTAGE
300
400
Run time figures are the manufacturers percentages calculated
against their own Ni-Cad batteries. Ni-Cad indexed at 100%
Manufacturer data taken from published material.
WEIGHT SAVING AGAINST OWN Ni-Cad BATTERY
Makita 18V Li-ion 3.0Ah
40%
Competitor A 18V Li-ion 2.0Ah
35%
Competitor B 18V Li-ion 2.6Ah
40%
Competitor C 18V Li-ion 3.0Ah
40%
Competitor D 18V Li-ion 3.0Ah
25%
0
10
20
PERCENTAGE
30
40
Weight figures are the manufacturers percentages calculated
against their own Ni-Cad batteries.
Manufacturer data taken from published material.
CHARGING TIME PER BATTERY
Makita 18V Li-ion 3.0Ah
22 min
Competitor A 18V Li-ion 2.0Ah
60 min
Competitor B 18V Li-ion 2.6Ah
30 min
Competitor C 18V Li-ion 3.0Ah
45 min
Competitor D 18V Li-ion 3.0Ah
60 min
Customer care: 01908 211678
Manufacturer data taken from published material.
18 VOLT
18v SDS+ rotary hammer
x2
BHR241RFE 18v
18v
BHR241Z*
18v SDS+ rotary hammer
x2
BHR240RFE 18v
18v
BHR240Z*
18v SDS+ rotary hammer
x2
BHR202RFE 18v
18v
BHR202Z*
Max. in steel
Max. in wood
Max. in concrete
Blows per minute
Impact energy
Vibration:
Rotary hammer
Hammer only
No load speed
Net weight
Battery
Max. in steel
Max. in wood
Max. in concrete
Blows per minute
Impact energy
Vibration:
Rotary hammer
Hammer only
No load speed
Net weight
Battery
Max. in steel
Max. in wood
Max. in concrete
Blows per minute
Impact energy
Vibration:
Rotary hammer
Hammer only
No load speed
Net weight
Battery
13mm
26mm
20mm
0-4,000bpm
1.9J
12.5m/s2
9.5m/s2
0-1,100rpm
3.2kg
3.0Ah Li-ion
13mm
26mm
18mm
0-4,000bpm
1.93J
14m/s2
11.5m/s2
0-1,100rpm
3.0kg
3.0Ah Li-ion
13mm
26mm
20mm
0-4,000bpm
1.93J
14.5m/s2
11.0m/s2
0-1,100rpm
3.2kg
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Side handle
Depth rod
Case
Standard Equipment
Fast charger
Battery cartridges
Side handle
Depth rod
Case
Standard Equipment
Fast charger
Battery cartridges
Side handle
Depth rod
Case
A light weight, powerful and
comfortable 3 mode hammer.
A light weight, powerful and
comfortable 3 mode hammer.
Compact and light weight
3 mode hammer.
:: 3 mode operation:
rotary only, hammer only
and rotary hammer.
:: Rubberised ergonomic handle.
:: 3 mode operation:
rotary only, hammer only
and rotary hammer.
:: Rubberised ergonomic handle.
:: 3 mode operation:
rotary only, hammer only
and rotary hammer.
:: LED Job light with afterglow.
:: Rubberised ergonomic handle.
LIMITED
STOCK
16
* Body only “Z” versions are supplied without battery, charger and case.
www.makitauk.com
5
18 VOLT
18v Combi drill 3 speed
x2
BHP451RFE 18v
x3
BHP451RFE3 18v
18v
BHP451Z*
18v Combi drill 2 speed
x2
BHP452RFE 18v
x3
BHP452RFE3 18v
18v
BHP452Z*
18v Combi drill 2 speed
x2
BHP453RFE 18v
18v
BHP453Z*
Max. in steel
13mm
Max. in wood
65mm
Max. in masonry
16mm
Max. torque
80Nm
Blows per
3: 0-25,500bpm
minute
2: 0-9,000bpm
1: 0-4,500bpm
No load speed
3: 0-1,700rpm
2: 0-600rpm
1: 0-300rpm
Net weight
2.2kg
Battery
3.0Ah Li-ion
Max. in steel
13mm
Max. in wood
38mm
Max. in masonry
13mm
Max. torque
50Nm
Blows per
2: 0-22,500bpm
minute
1: 0-6,000bpm
No load speed
2: 0-1,500rpm
1: 0-400rpm
Net weight
1.8kg
Battery
3.0Ah Li-ion
Max. in steel
13mm
Max. in wood
36mm
Max. in masonry
13mm
Max. torque
42Nm
Blows per
2: 0-19,500bpm
minute
1: 0-6,000bpm
No load speed
2: 0-1,300rpm
1: 0-400rpm
Net weight
1.9kg
Battery
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
2 screwdriver bits
Belt clip
Case
Standard Equipment
Fast charger
Battery cartridges
Double ended bit
Case
Standard Equipment
Fast charger
Battery cartridges
2 screwdriver bits
Side handle
Depth rod
Belt clip
Case
High operation efficiency
with high torque.
:: Three speed gear box
:: Twin LED job light with afterglow.
:: Keyless heavy duty metal chuck.
Compact and light
weight for control
and maneuverability.
:: LED job light with afterglow.
:: "Single sleeve" keyless
chuck allows for easy
one-hand bit replacement.
Compact and light
weight for control
and maneuverability.
:: LED job light with afterglow.
:: "Single sleeve" keyless
chuck allows for easy
one-hand bit replacement.
METAL
GEAR BOX
80
16
* Body only “Z” versions are supplied without battery, charger and case.
6
Customer care: 01908 211678
16
16
18v Drill driver 3 speed
x2
BDF451RFE 18v
x3
BDF451RFE3 18v
18v Drill driver 2 speed
x2
BDF452RFE 18v
x3
BDF452RFE3 18v
18v
BDF452Z
18v Drill driver 2 speed
x2
BDF453RFE 18v
Max. in steel
Max. in wood
Max. torque
No load speed
Max. in steel
Max. in wood
Max. torque
No load speed
Max. in steel
Max. in wood
Max. torque
No load speed
Net weight
Battery
13mm
65mm
80Nm
3: 0-1,700rpm
2: 0-600rpm
1: 0-300rpm
2.1kg
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
2 screwdriver bits
Side handle
Belt clip
Case
High operation efficiency
with high torque.
:: Three speed gear box
:: Twin LED job light with afterglow.
:: Keyless heavy duty metal chuck.
Net weight
Battery
13mm
38mm
50Nm
2: 0-1,500rpm
1:0-400rpm
1.8kg
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
2 screwdriver bits
Belt clip
Case
Compact and light
weight for control
and maneuverability.
:: "Single sleeve" keyless
chuck allows for easy
one-hand bit replacement.
:: LED job light with afterglow.
Net weight
Battery
13mm
36mm
42Nm
2: 0-1,300rpm
1: 0-400rpm
1.8kg
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Double ended bit
Case
Compact and light
weight for control
and maneuverability.
:: LED job light with afterglow.
:: "Single sleeve" keyless
chuck allows for easy
one-hand bit replacement.
METAL
GEAR BOX
80
16
16
16
* Body only “Z” versions are supplied without battery, charger and case.
www.makitauk.com
7
18 VOLT
18v 4 Function combi
x2
BTP140RFE 18v
18v
BTP140Z*
Max. in steel
10mm
Max. in wood
21mm
Max. in masonry
8mm
Max. torque (impact mode) 140Nm
Blows per minute:
Impact
0-3,200bpm
Percussion
0-27,600bpm
No load speed
2: 0-2,300rpm
1: 0-700rpm
Net weight
1.8kg
Battery
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Belt clip
Case
4 Operation modes for
ultimate versatility: Impact
driver, screwdriver, rotary
drill and percussion drill.
18v Angle drill
x2
BDA350RFE 18v
18v
BDA350Z*
x2
BDA351RFE (Key-less chuck) 18v
18v
BDA351Z* (Key-less chuck)
Max. in steel
10mm
Max. in wood
25mm
Max. torque
13.7Nm
No load speed
0-1,800rpm
Net weight
1.6kg
Battery
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Side handle
Chuck key (BDA350 only)
Case
Choose between two
chuck configurations
to suit your needs.
:: Compact and light weight.
:: The keyed chuck has extra
compact head height.
:: LED job light with afterglow.
:: One-touch mode selection
by operating only one lever,
operation mode can be
selected from the four.
:: LED job light with afterglow.
18v Impact driver
x2
BTD140RFE 18v
x3
BTD140RFE3 18v
18v
BTD140Z*
Machine screws
M4-M8
Standard bolt
M5-M14
Coarse thread
22mm-125mm
High tensile bolt
M5-M12
Max. torque
145Nm
Blows per minute
0-3,200bpm
No load speed
0-2,300rpm
Net weight
1.5kg
Battery
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Phillips bit
Belt clip
Case
Compact with overall length
of only 146mm.
:: Weights only 1.5kg
for easy handling.
:: Phosphorescent bumper.
:: LED Job light with afterglow.
1/4”
HEX DRIVE
DIN STANDARD
1/4”
HEX DRIVE
DIN STANDARD
140
40
145
45
BDA350
16
* Body only “Z” versions are supplied without battery, charger and case.
8
Customer care: 01908 211678
BDA351
18v Brushless Impact driver
x2
BTD144RFE 18v
18v
BTD144Z*
18v Angle impact driver
x2
BTL061RFE 18v
18v
BTL061Z*
18v Impact wrench
x2
BTW251RFE 18v
18v
BTW251Z*
Machine screws
M4-M8
Standard bolt
M5-M14
Coarse thread
22mm-125mm
High tensile bolt
M5-M12
Max. torque
160Nm
Blows per minute 3: 0-3,400bpm
2: 0-2,800bpm
1: 0-1,300bpm
No load speed
3: 0-2,600rpm
2: 0-2,000rpm
1: 0-1,300rpm
Net weight
1.5kg
Battery
3.0Ah Li-ion
Machine screws
Standard bolt
Coarse thread
High tensile bolt
Max. torque
Blows per minute
No load speed
Net weight
Battery
Drive shank
Max. torque
Blows per minute
No load speed
Net weight
Battery
Standard Equipment
Fast charger
Battery cartridges
2 Phillips bits
Belt clip
Case
Maintenance free working
and more work per battery.
M4-M8
M4-M12
22mm-75mm
M4-M8
60Nm
0-3,000bpm
0-2,000rpm
1.7kg
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
2 Phillips bits
Belt clip
Case
Compact angled head for
easy access in tight places.
:: Convenient reverse switch.
:: High comfort grips.
:: LED Job light with afterglow.
1/2” square
230Nm
0-3,200bpm
0-2,100rpm
1.7kg
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Belt clip
Case
High operation efficiency
with high torque.
:: Weights only 1.7kg
for easy handling.
:: Phosphorescent bumper.
:: LED Job light with afterglow.
:: 1/2” square drive.
:: LED Job light with afterglow
and off switch.
:: Electronic speed control.
1/4”
1/4”
HEX DRIVE
DIN STANDARD
HEX DRIVE
DIN STANDARD
160
60
230
* Body only “Z” versions are supplied without battery, charger and case.
www.makitauk.com
9
18 VOLT
18v Impact wrench
x2
BTW450RFE 18v
18v
BTW450Z*
18v Auto-feed screwdriver
x2
BFR750RFE 18v
x3
BFR750RFE3 18v
18v
BFR750Z*
18v Auto-feed screwdriver
x2
BFR550RFE 18v
18v
BFR550Z*
Drive shank
Max. torque
Blows per minute
No load speed
Net weight
Battery
Capacities:
Diameter
Length
No load speed
Net weight
Battery
Capacities:
Diameter
Length
No load speed
Net weight
Battery
1/2” square
440Nm
2,200bpm
1,600rpm
3.4kg
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Belt clip
Case
High operation efficiency
with 440Nm of torque.
:: Same 440Nm of torque in
both rotational directions.
:: large protective front bumper.
:: LED Job light with afterglow.
:: Easy to operate rocker trigger.
Standard Equipment
Fast charger
Battery cartridges
Phillips bit
Belt clip
Case
High operation efficiency
delivered from high
rotational speed and
improved screw strip
management.
High operation efficiency
delivered from high
rotational speed and
improved screw strip
management.
:: Improved casing.
:: Anti tilt device prevents the
screw from swaying.
:: Dust proof construction.
:: New silent clutch.
:: Foldable screw guide keeps
screw strips free from tangle.
:: Improved casing.
:: Anti tilt device prevents the
screw from swaying.
:: Dust proof construction.
:: New silent clutch.
:: Foldable screw guide keeps
screw strips free from tangle.
0000
* Body only “Z” versions are supplied without battery, charger and case.
Customer care: 01908 211678
4mm
25-55mm
4,000rpm
2.3kg
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Phillips bit
Belt clip
Case
440
10
4mm
45-75mm
4,000rpm
2.3kg
3.0Ah Li-ion
0000
18v Stapler
BST221RFE
BST221Z*
18v
x2
18v
Capacities:
Width
10mm
Length 10, 13, 16, 19 and 22mm
Staple gauge
0.6 x 1.2mm
Magazine capacity
98 Staples
Net weight
2.3kg
Battery
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Belt clip
Goggles
Case
Hose-less operation,
enabling efficient interior
finishing work free from
a large compressor.
Machined aluminium
magazine for precision
and durability.
:: Single trigger switch.
:: Depth adjustment.
:: Rubberised ergonomic handle.
18v Circular saw
x2
BSS610RFE 18v
x3
BSS610RFE3 18v
18v
BSS610Z*
Max. cut @ 90°
Max. cut @ 45°
Max. cut @ 50°
Blade diameter
Bore diameter
No load speed
Net weight
Battery
18v Circular saw
18v
BSS611Z*
57mm
40mm
36mm
165mm
20mm
3,700rpm
3.2kg
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Saw blade
Guide rule
Hex wrench
Case
Lightweight and compact.
Max. cut @ 90°
Max. cut @ 45°
Max. cut @ 50°
Blade diameter
Bore diameter
No load speed
Net weight
Battery
57mm
40mm
36mm
165mm
20mm
3,700rpm
3.1kg
3.0Ah Li-ion
Standard Equipment
Saw blade
Guide rule
Hex wrench
Lightweight and compact.
:: Large lock-off lever.
:: Removable dust nozzle.
:: Rubberised ergonomic handle.
:: Smooth and powerful cutting
at the high rotational speed
of 3,700 rpm delivered from
enhanced motor.
:: Easy to trace cutting line with
LED job light and Built-in
blow-off nozzle.
:: Rubberised ergonomic handle.
* Body only “Z” versions are supplied without battery, charger and case.
www.makitauk.com
11
18 VOLT
18v Circular saw
x2
BSS501RFE 18v
18v
BSS501Z*
Max. cut @ 90°
Max. cut @ 45°
Blade diameter
Bore diameter
No load speed
Net weight
Battery
51mm
35mm
136mm
20mm
3,600rpm
2.6kg
3.0Ah Li-ion
18v Metal cutting saw
x2
BCS550RFE 18v
18v
BCS550Z*
18v 115mm Angle grinder
x2
BGA452RFE 18v
x3
BGA452RFE3 18v
18v
BGA452Z*
Max. cut @ 90°
Material thickness
Blade diameter
Bore diameter
No load speed
Net weight
Battery
Wheel diameter
Bore size
No load speed
Net weight
Battery
Standard Equipment
Fast charger
Battery cartridges
Saw blade
Guide rule
Hex wrench
Case
Standard Equipment
Fast charger
Battery cartridges
TCT saw blade
Hex wrench
Safety goggles
Case
Lightweight and compact.
Lightweight and compact.
:: Large lock-off lever.
:: Removable dust nozzle.
:: Easy to trace cutting line
with LED job light.
:: Rubberised ergonomic handle.
:: Smooth and powerful cutting
at the high rotational speed
of 3,400 rpm delivered from
enhanced motor.
:: Easy to trace cutting line
with LED job light.
:: Rubberised ergonomic handle.
* Body only “Z” versions are supplied without battery, charger and case.
12
51mm
mild
3mm steel
136mm
20mm
3,600rpm
2.4kg
3.0Ah Li-ion
Customer care: 01908 211678
115mm
22mm
10,000rpm
1.9kg
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Lock nut wrench
Side handle
Abrasive wheel
Case
Powerful angle grinder now
free from the restriction of
cables and power sockets.
:: Capable of using wheels or
discs for mains Grinders.
:: Easy-to-grip, small
circumference motor housing.
:: Anti-restart function for safety
(with warning lamp).
:: Electronic current limiter
(with warning lamp).
18v Reciprocating saw
x2
BJR181RFE 18v
x3
BJR181RFE3 18v
18v
BJR181Z*
18v Reciprocating saw
18v
BJR182Z*
Max. cut in wood
Max. cut in pipe
Length of stroke
Strokes per min
Net weight
Battery
Max. cut in wood
Max. cut in pipe
Length of stroke
Strokes per min
Net weight
Battery
255mm
130mm
28mm
0-2,900spm
3.7kg
3.0Ah Li-ion
255mm
130mm
28mm
0-2,900spm
3.5kg
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Reciprocating saw blade set
Hook
Case
Standard Equipment
Reciprocating saw blade
Extra high cutting speed with
large variable speed trigger.
:: Tool-less blade change
and Tool-less shoe
adjustment.
:: Dust preventing air flow
protects the front head
mechanism.
:: Twin LED job light
with afterglow.
:: Tool-less blade change
and Tool-less shoe
adjustment.
:: Dust preventing air flow
protects the front head
mechanism.
:: Twin LED job light
with afterglow.
T
Extra high cutting speed
model with large variable
speed trigger.
T
18v Jigsaw
BJV180RFE
BJV180Z*
18v
x2
18v
Max. cut in wood
Max. cut in steel
Length of stroke
Strokes per min
Net weight
Battery
135mm
10mm
26mm
0-2,600spm
2.8kg
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Hex wrench
Anti splinter device
Cover plate
Dust nozzle
Case
Lightweight and compact.
:: Smooth and powerful cutting
at the high stroke speed
of 2,600 spm.
:: Easy to trace cutting line with
LED job light.
:: Rubberised ergonomic handle.
T
* Body only “Z” versions are supplied without battery, charger and case.
www.makitauk.com
13
18 VOLT
18v Portable band saw
x2
BPB180RFE 18v
Max. cut in pipe:
Round pipe
Square pipe
Blade speed
Net weight
Battery
120mm Dia
120 x 120mm
1.4 - 2.7m/s
6.4kg
3.0Ah Li-ion
Cutting capacity:
Mild steel
Stainless steel
Strokes per min
Net weight
Battery
18v Vibrating poker
x2
BVR350RFE 18v
18v
x2
18v
1.3mm
1.0mm
2,800spm
2.3kg
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Hex wrench 4mm
Carbon steel saw blade
Case
Standard Equipment
Fast charger
Battery cartridges
Hex wrench
Belt clip
Case
Light weight and well
balanced tool design.
Compact and light for
easy handling and high
maneuverability.
:: Electronic current limiter.
:: LED Job Light with afterglow.
:: Speed Preset Dial allows
adjustment of the blade
speed to suit material or
desired finish.
14
18v Nibbler
BJS130RFE
BJS130Z*
Customer care: 01908 211678
:: 360° swivelling shear head.
:: On tool storage for hex wrench.
:: Lock off button for
safe operation.
Vibration
Shaft diameter
Shaft length
Net weight
Battery
13,000vpm
25mm
800mm
3.2kg
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Case
Bi-directional switch for
more convenient use.
:: Ergonomically designed
for maximum efficiency
and minimum fatigue
in operation.
:: Enhanced protective cover.
18v Chainsaw
BUC122Z*
Cutting capacity
Chain speed
Chain pitch
Chain gauge
Net weight
Battery
18v Blower
BUB182Z*
18v
115mm
5.0m/sec
1/4”
25AP
2.5kg
3.0Ah Li-ion
Standard Equipment
File
Chain oil
Chain bar cover
Low fatigue trimming
and pruning, for use on
branches, saplings and
the like.
:: Tool-less chain tensioning
and blade change.
:: Rubberised ergonomic handle.
:: Automatic oiling.
T
Max air volume
Max air velocity
Max air pressure
Net weight
18v Cordless torch
18v
BML185*
18v
2.3m3/min
72m/sec
5.4kPa
1.7kg
Rubberised soft grip,
ergonomically designed.
:: Vacuum function.
:: Variable speed trigger.
:: 3 stage air setting dial.
BML185 Bulb
Net weight
Battery
Xenon
0.36kg
3.0Ah Li-ion
not supplied
Standard Equipment
Bulb
Wrist strap
Rubberised soft grip,
ergonomically designed.
:: 4 position pivoting head with
positive stops at 0, 45, 90,
110 degrees.
:: Replacement Xenon bulb
stored in the head case.
:: With over discharge
protection circuit.
:: Falling impact strength
of 1m enough to protect
the bulb.
For multi voltage lamp
(BML184) see page 25
www.makitauk.com
15
18 VOLT
18v 2pc Combi kit
18v
x2
LXT202
Combi drill
Impact driver
Battery
18v 2pc Combi kit
18v
x2
LXT231
BHP451Z
BTD140Z
3.0Ah Li-ion
Standard Equipment
Fast charger
2 Battery cartridges
Case
16
Customer care: 01908 211678
Combi drill
Jigsaw
Battery
18v 4pc Combi kit
18v
x3
LXT425
BHP452Z
BJV180Z
3.0Ah Li-ion
Standard Equipment
Fast charger
2 Battery cartridges
Case
Combi drill
Jigsaw
Angle grinder
Torch
Battery
BHP452Z
BJV180Z
BGA452Z
BML185
3.0Ah Li-ion
Standard Equipment
Fast charger
3 Battery cartridges
Case
18v 4pc Combi kit
18v
x3
LXT400
Combi drill
Circular saw
Impact driver
Torch
Battery
18v 6pc Combi kit
18v
x3
LXT600
BHP451Z
BSS610Z
BTD140Z
BML185
3.0Ah Li-ion
Standard Equipment
Fast charger
3 Battery cartridges
Soft tool bag
Combi drill
Circular saw
Reciprocating saw
Impact driver
Angle grinder
Torch
Battery
Site radio
BMR100
BHP451Z
BSS610Z
BJR181Z
BTD140Z
BGA452Z
BML185
3.0Ah Li-ion
Standard Equipment
Fast charger
3 Battery cartridges
Soft tool bag
18v
Frequency:
FM
87.5-108Mhz
AM
522-1629kHZ
Dimensions:
LxWxH 10 1/2" x 6 1/2" 12 1/7"
Net Weight
4.2kg
Power Supply:
AC
power adaptor
DC
9.6v-24v battery
Standard Equipment
AC power adaptor
Powered by any Makita
9v-24v cluster, slide battery
or mains adaptor.
:: AUX input for an MP3 player.
:: Bumpers and metal bars
protect against rough handling.
:: Shower Proof.
9.6v
24v
* Body only “Z” versions are supplied without battery, charger and case.
www.makitauk.com
17
14.4 VOLT
14.4v SDS+ Hammer drill
x2
BHR162RFE 18v
18v
BHR162Z*
14.4v Combi drill 3 speed
x2
BHP441RFE 18v
x3
BHP441RFE3 18v
14.4v Combi drill 2 speed
x2
BHP442RFE 18v
x3
BHP442RFE3 18v
18v
BHP442Z*
Max. in steel
Max. in wood
Max. in concrete
Blows per minute
Impact energy
Vibration
No load speed
Net weight
Battery
Max. in steel
13mm
Max. in wood
50mm
Max. in masonry
14mm
Max. torque
70Nm
Blows per
3: 0-25,500bpm
minute
2: 0-9,000bpm
1: 0-4,500bpm
No load speed
3: 0-1,700rpm
2: 0-600rpm
1: 0-300rpm
Net weight
2.1kg
Battery
3.0Ah Li-ion
Max. in steel
13mm
Max. in wood
32mm
Max. in masonry
13mm
Max. torque
44Nm
Blows per
2: 0-21,000bpm
minute
1: 0-6,000bpm
No load speed
2: 0-1,400rpm
1: 0-400rpm
Net weight
1.7kg
Battery
3.0Ah Li-ion
13mm
24mm
16mm
0-5,000bpm
1.2J
12.5m/s2
0-1,500rpm
2.1kg
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Side handle
Depth rod
Case
Light weight drilling at 2.1kg.
:: Dual operation mode
"rotary only and rotary
hammer”.
:: High comfort grips.
:: Conveniently located push
button for rotation reverse.
:: LED Job light with afterglow.
:: Compact, lightweight and
effective fixings hammer.
Standard Equipment
Fast charger
Battery cartridges
2 screwdriver bits
Side handle
Depth rod
Belt clip
Case
High operation efficiency
with high torque.
Standard Equipment
Fast charger
Battery cartridges
2 screwdriver bits
Belt clip
Case
Light weight and compact for
working in difficult areas.
:: LED job light with afterglow.
:: "Single sleeve" keyless
chuck allows for easy
one-hand bit replacement.
:: Twin LED job light with afterglow.
:: Keyless heavy duty metal chuck.
METAL
GEAR BOX
70
16
* Body only “Z” versions are supplied without battery, charger and case.
18
Customer care: 01908 211678
16
14.4v Combi drill 2 speed
18v
BHP343RH
x1 1.5Ah
18v
BHP343Z*
14.4v Drill driver 3 speed
x2
BDF441RFE 18v
14.4v Drill driver 2 speed
x2
BDF442RFE 18v
x3
BDF442RFE3 18v
Max. in steel
10mm
Max. in wood
25mm
Max. in masonry
10mm
Max. torque
36Nm
Blows per
2: 0-19,500bpm
minute
1: 0-6,000bpm
No load speed
2: 0-1,300rpm
1: 0-400rpm
Net weight
1.5kg
Battery
1.5Ah Li-ion
Max. in steel
Max. in wood
Max. torque
No load speed
Max. in steel
Max. in wood
Max. torque
No load speed
Net weight
Battery
13mm
50mm
70Nm
3: 0-1,700rpm
2: 0-600rpm
1: 0-300rpm
2.0kg
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Double ended bit
Case
Standard Equipment
Fast charger
Battery cartridges
2 screwdriver bits
Side handle
Belt clip
Case
High operation efficiency
with high torque.
High operation efficiency
with high torque.
:: "Single sleeve" keyless
chuck allows for easy
one-hand bit replacement.
:: Twin LED job light with afterglow.
:: Keyless heavy duty metal chuck.
h
1.5A -ion
r
ium
Litheries fo
batten moreing
ev t sav
IN
gh
wei d 15 M
an ARGE
CH ME
TI
Net weight
Battery
13mm
38mm
44Nm
2: 0-1,400rpm
1:0-400rpm
1.7kg
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
2 screwdriver bits
Belt clip
Case
Light weight and compact for
working in difficult areas.
:: LED job light with afterglow.
:: "Single sleeve" keyless
chuck allows for easy
one-hand bit replacement.
METAL
GEAR BOX
70
16
16
16
* Body only “Z” versions are supplied without battery, charger and case.
www.makitauk.com
19
14.4 VOLT
14.4v Drill driver 2 speed
18v
BDF343RH
x1 1.5Ah
18v
BDF343Z*
14.4v 4 Function combi
x2
BTP130RFE 18v
18v
BTP130Z*
Max. in steel
Max. in wood
Max. torque
No load speed
Max. in steel
10mm
Max. in wood
21mm
Max. in masonry
8mm
Max. torque
135Nm
Blows per minute:
Impact
0-3,200bpm
Percussion
0-28,800bpm
No load speed
2: 0-2,400rpm
1: 0-700rpm
Net weight
1.7kg
Battery
3.0Ah Li-ion
Net weight
Battery
10mm
25mm
36Nm
2: 0-1,300rpm
1: 0-400rpm
1.4kg
1.5Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Double ended bit
Case
High operation efficiency
with high torque.
:: "Single sleeve" keyless
chuck allows for easy
one-hand bit replacement
Standard Equipment
Fast charger
Battery cartridges
Belt clip
Case
4 Operation modes for
ultimate versatility: Impact
driver, screwdriver, rotary
drill and percussion drill.
14.4v Angle drill
x2
BDA340RFE 18v
18v
BDA340Z*
x2
BDA341RFE (Key-less chuck) 18v
18v
BDA341Z* (Key-less chuck)
Max. in steel
10mm
Max. in wood
25mm
No load speed
0-1,800rpm
Net weight
1.5kg
Battery
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Side handle
Chuck key (BDA350 only)
Case
Choose between two
chuck configurations
to suit your needs.
:: Compact and light weight.
:: The keyed chuck has extra
compact head height.
:: LED job light with afterglow.
:: One-touch mode selection
by operating only one lever,
operation mode can be
selected from the four.
:: LED job light with afterglow.
h
1.5A -ion
r
ium
Litheries fo
batten moreing
ev t sav
IN
gh
wei d 15 M
an ARGE
H
C
E
TIM
1/4”
HEX DRIVE
DIN STANDARD
135
35
BDA340
16
* Body only “Z” versions are supplied without battery, charger and case.
20
Customer care: 01908 211678
16
BDA341
14.4v Impact driver
BTD130FRFE (blue)
BTD130FRFEW (white)
BTD130FRFER (red)
18v
x2
18v
x2
14.4v Brushless impact driver
x2
BTD132RFE 18v
18v
BTD132ZZ*
18v
x2
Machine screws
M4-M8
Standard bolt
M5-M14
Coarse thread
22mm-125mm
High tensile bolt
M5-M12
Max. torque
140Nm
Blows per minute
0-3,200bpm
No load speed
0-2,400rpm
Net weight
1.4kg
Battery
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Belt clip
Case
Machine screws
M4-M8
Standard bolt
M5-M14
Coarse thread
22mm-125mm
High tensile bolt
M5-M12
Max. torque
155Nm
Blows per minute
High
0-3,200bpm
Medium
0-2,600bpm
Low
0-1,100bpm
No load speed
High
0-2,400rpm
Medium
0-1,800rpm
Low
0-1,100rpm
Net weight
1.3kg
Battery
3.0Ah Li-ion
Spark and maintenance free
working due to the elimination
of carbon brushes with the
introduction of a controller
unit and sensors. This also
means more work per battery
when compared to a brush
type motor.
Windings
Permanent magnet
Controller
Very compact with overall
length of only 146mm.
:: Weights only 1.4kg
for easy handling.
:: Phosphorescent bumper.
:: LED Job light with afterglow.
:: Available in a choice
of 3 colours.
1/4”
HEX DRIVE
140
40
DIN STANDARD
BTD130RFER
BTD130RFEW BTD130RFE
Standard Equipment
Fast charger
Battery cartridges
Phillips bit
Belt clip
Case
Very compact with overall
length of only 155mm.
:: LED Job light with afterglow
and off switch.
:: Electronic speed control
1/4”
HEX DRIVE
DIN STANDARD
155
55
Control panel
:: 3 stage speed control
:: Indicator lights
:: Job light on/off
† Maintenance free: until the service life of ball bearings is over.
* Body only “Z” versions are supplied without battery, charger and case.
www.makitauk.com
21
14.4 VOLT
14.4v Angle impact driver
x2
BTL060RFE 18v
18v
BTL060Z*
14.4v Autofeed screwdriver
x2
BFR540RFE 18v
x3
BFR540RFE3 18v
18v
BFR540Z*
14.4v Stapler
BST110RFE
BST110Z*
Machine screws
Standard bolt
Coarse thread
High tensile bolt
Max. torque
Blows per minute
No load speed
Net weight
Battery
Capacities:
Diameter
Length
No load speed
Net weight
Battery
Capacities:
Width
Length
Magazine capacity
Net weight
Battery
M4-M8
M4-M12
22mm-75mm
M4-M8
60Nm
0-3,000bpm
0-2,000rpm
1.6kg
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
2 Phillips bits
Belt clip
Case
Compact angled head for
easy access in tight places.
:: Convenient reverse switch.
:: High comfort grips.
:: LED Job light with afterglow.
Standard Equipment
Fast charger
Battery cartridges
Phillips bit
Belt clip
Case
High operation efficiency
delivered from high
rotational speed and
improved screw strip
management.
:: Improved casing.
:: Anti tilt device prevents the
screw from swaying.
:: Dust proof construction.
:: New silent clutch.
:: Foldable screw guide keeps
screw strips free from tangle.
1/4”
HEX DRIVE
DIN STANDARD
0000
60
* Body only “Z” versions are supplied without battery, charger and case.
22
Customer care: 01908 211678
4mm
25-55mm
4,000rpm
2.1kg
3.0Ah Li-ion
18v
x2
18v
10mm
7 and 10mm
125 staples
1.9kg
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Goggles
Case
Hose-less operation,
enabling efficient interior
finishing work free from
a large compressor.
:: Double trigger for
enhanced safety.
:: Rubberised ergonomic handle.
14.4v Stapler
BST220Z*
14.4v Pin nailer
x2
BPT350RFE 18v
18v
BPT350Z*
14.4v Circular saw
x2
BSS500RFE 18v
18v
BSS500Z*
Capacities:
Width
10mm
Length 10, 13, 16, 19 and 22mm
Staple gauge
0.6 x 1.2mm
Magazine capacity
98 staples
Net weight
2.3kg
Battery
3.0Ah Li-ion
Capacities:
Diameter
0.6mm
Length
18, 25, 30 and 35mm
Nail gauge
23swg
Magazine capacity
110 nails
Net weight
2.0kg
Battery
3.0Ah Li-ion
Max. cut @ 90°
Max. cut @ 45°
Blade diameter
Bore diameter
No load speed
Net weight
Battery
Standard Equipment
Belt clip
Goggles
Standard Equipment
Fast charger
Battery cartridges
Case
Standard Equipment
Fast charger
Battery cartridges
Saw blade
Guide rule
Dust nozzle
Hex wrench
Case
18v
Hose-less operation,
enabling efficient interior
finishing work free from
a large compressor.
Machined aluminium
magazine for precision
and durability.
:: Single trigger switch.
:: Depth adjustment.
:: Rubberised ergonomic handle.
Hose-less operation,
enabling efficient interior
finishing work free from
a large compressor.
51mm
35mm
136mm
20mm
3,600rpm
2.5kg
3.0Ah Li-ion
Lightweight and compact.
:: LED job light.
:: Double trigger for
enhanced safety.
:: Depth adjustment.
:: Anti-dry-fire mechanism
locks trigger when 3 or less
nails remain in the magazine.
:: Rubberised ergonomic handle.
:: Large lock-off lever.
:: Removable dust nozzle.
:: Easy to trace cutting line
with LED job light.
:: Rubberised ergonomic handle.
* Body only “Z” versions are supplied without battery, charger and case.
www.makitauk.com
23
14.4 VOLT
14.4v 115mm Angle grinder
x2
BGA450RFE 18v
18v
BGA450Z*
14.4v Jigsaw
BJV140RFE
BJV140Z*
Wheel diameter
Bore size
No load speed
Net weight
Battery
Max. cut in wood
Max. cut in steel
Length of stroke
Strokes per min
Net weight
Battery
115mm
22mm
10,000rpm
1.8kg
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Lock nut wrench
Side handle
Abrasive wheel
Case
Powerful angle grinder now
free from the restriction of
cables and power sockets.
:: Capable of using wheels or
discs for mains Grinders.
:: Easy-to-grip, small
circumference motor housing.
:: Anti-restart function for safety
(with warning lamp).
:: Electronic current limiter
(with warning lamp).
18v
135mm
10mm
26mm
0-2,600spm
2.7kg
3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Hex wrench
Anti splinter device
Cover plate
Dust nozzle
Case
:: Smooth and powerful cutting
at the high stroke speed
of 2,600 spm.
:: Easy to trace cutting line with
LED job light.
:: Rubberised ergonomic handle.
* Body only “Z” versions are supplied without battery, charger and case.
Customer care: 01908 211678
Cutting capacity
Chain speed
Chain pitch
Chain gauge
Net weight
Battery
115mm
4.8m/sec
1/4”
25AP
2.4kg
3.0Ah Li-ion
Standard Equipment
File
Chain oil
Chain bar cover
Low fatigue trimming
and pruning, for use on
branches, saplings and
the like.
Lightweight and compact.
T
24
14.4v Chainsaw
18v
BUC121Z*
18v
x2
:: Tool-less chain tensioning
and blade change.
:: Rubberised ergonomic handle.
:: Automatic oiling.
T
14.4v Blower
BUB142Z*
Max air volume
Max air velocity
Max air pressure
Net weight
18v
2.3m3/min
68m/sec
5.4kPa
1.6kg
Rubberised soft grip,
ergonomically designed.
:: Vacuum function.
:: Variable speed trigger.
:: 3 stage air setting dial.
14.4v Cordless torch
18v
BML145*
18v/14.4v Cordless lamp/torch
18v
BML184*
BML145 Bulb
Net weight
Battery
Bulb
Net weight
Battery
Krypton
0.36kg
3.0Ah Li-ion
not supplied
Standard Equipment
Bulb
Wrist strap
Rubberised soft grip,
ergonomically designed.
:: 4 position pivoting head with
positive stops at 0, 45, 90,
110 degrees.
:: Replacement Xenon bulb
stored in the head case.
:: With over discharge
protection circuit.
:: Falling impact strength
of 1m enough to protect
the bulb.
Fluorescent
0.4kg
3.0Ah Li-ion
not supplied
Standard Equipment
Bulb
Shoulder strap
Hook
Rubberised soft grip,
ergonomically designed.
:: Dual voltage, both 18v and
14.4v lithium-ion batteries
can be used with this lamp.
* Body only “Z” versions are supplied without battery, charger and case.
www.makitauk.com
25
10.8 VOLT
10.8v Drill driver
18v
x2
DF030WE
10.8v Drill driver
18v
x2
DF330WE
10.8v Impact driver
18v
x2
TD090WE
Max. in steel
10mm
Max. in wood
21mm
Max. torque
24Nm
Torque settings 18 plus drill mode
No load speed
2: 0-1,300rpm
1: 0-350rpm
Net weight
0.88kg
Battery
1.3Ah Li-ion
Max. in steel
10mm
Max. in wood
21mm
Max. torque
24Nm
Torque settings 18 plus drill mode
No load speed
2: 0-1,300rpm
1: 0-350rpm
Net weight
1.0kg
Battery
1.3Ah Li-ion
Machine screws
Standard bolt
Coarse thread
High tensile bolt
Max. torque
Blows per minute
No load speed
Net weight
Battery
Standard Equipment
Fast charger
Battery cartridges
Screw driver bit
Case
Standard Equipment
Fast charger
Battery cartridges
Screw driver bit
Case
Half size drill driver which
is light and great for
tight spaces.
Tiny and powerful three jaw
chuck drill driver.
:: LED job light.
:: Ideal for applications
in tight spaces.
:: Hex shank chuck for easy
one handed release.
:: Reversing switch.
:: LED job light.
:: Ideal for applications
in tight spaces.
:: 3 jaw chuck, ideal for use with
your existing accessories.
:: Reversing switch.
Standard Equipment
Fast charger
Battery cartridges
Screw driver bit
Case
Small and powerful
impact driver.
:: LED job light.
:: Impact driver action delivers
90Nm torque.
:: Minimal pressure required
from the operator.
:: Reversing switch.
1/4”
HEX DRIVE
DIN STANDARD
1/4”
HEX DRIVE
DIN STANDARD
90
26
Customer care: 01908 211678
M4-M8
M5-M12
22mm-90mm
M5-M10
90Nm
0-3,000bpm
0-2,400rpm
0.92kg
1.3Ah Li-ion
7.2 VOLT
7.2v Drill driver
18v
x2
DF010DSE
7.2v Screwdriver
18v
x2
DF011DS
Max. in steel
5mm
Max. in wood
6mm
Max. torque
5.6Nm
Torque settings 21 plus drill mode
No load speed
2: 650rpm
1: 200rpm
Net weight
0.55kg
Battery
1.0Ah Li-ion
Max. torque
No load speed
Net weight
Battery
Standard Equipment
Fast charger
Battery cartridges
2 x Phillips bits
Case
Versatile drill driver for
those hard to get places.
7.2v Impact driver
18v
x2
TD020DSE
4.5Nm
220rpm
0.41kg
1.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
2 x Phillips bits
Case
Versatile drill driver for
those hard to get places.
::
::
::
::
LED job light.
Use in in-line or pistol mode.
Soft start trigger.
Reversing switch.
:: LED job light
with on/off switch.
:: Use in in-line or pistol mode.
:: Soft start trigger.
:: Reversing switch.
Machine screws
Standard bolt
Coarse thread
High tensile bolt
Max. torque
Blows per minute
No load speed
Net weight
Battery
M3-M8
M3-M8
22mm-45mm
M3-M6
20Nm
3,000bpm
2,300rpm
0.53kg
1.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Holster
6 impact driver bit set
Magnetic bit holder
Clear screw guide inc. Pozi 2 bit
Soft case
Versatile impact driver for
those hard to get places.
:: LED job light
with on/off switch.
:: Use in in-line or pistol mode.
:: Impact driver action delivers
20Nm torque.
:: Minimal pressure required
from the operator.
:: Reversing switch.
1/4”
1/4”
HEX DRIVE
DIN STANDARD
HEX DRIVE
DIN STANDARD
1/4”
HEX DRIVE
DIN STANDARD
20
www.makitauk.com
27
7.2 VOLT
7.2v Cordless gas nailer
18v
x2
GN900SE
Nail type
Clipped head
Max length
50-90mm
Gauge
2.9-3.3mm
Magazine capacity
44
Magazine angle
34º
Shots per battery
4,000
Shots per fuel cell
1,200
Net weight
3.5kg
Battery
1.0Ah Li-ion
The new first fix cordless gas
nailer designed for the demands
of the professional.
Suitable for timber frames, roofing
joists and a host of other applications
Makita now have a better solution
with this portable machine.
Standard Equipment
Fast charger
Battery cartridges
Hex wrench
Case
No leads, no hoses,
just fast versatile power.
:: 30 minute charge time,
4 times quicker than the
leading competitor.
:: The only gas nailer with
Lithium-ion battery technology.
:: Shock absorbing battery fitting
to protect the terminals.
:: LED low battery and error
detection system.
30 minute
charge time
28
Customer care: 01908 211678
The only gas nailer with
Lithium-ion battery technology
ACCESSORIES
Batteries and chargers
PART NUMBER
Batteries
194204-5
194065-3
194558-0
194550-6
194355-4
Chargers
DC18RA
DC18RA/1
DC18SE
DC10WA
DC07SA
DESCRIPTION
TOOL MODEL NUMBER
18V 3.0 Ah Li-ion battery cartridge
14.4V 3.0 Ah Li-ion battery cartridge
14.4V 1.5 Ah Li-ion battery cartridge
10.8V 1.3 Ah Li-ion battery cartridge
7.2V 1.0 Ah Li-ion battery cartridge
18V Li-ion machines
14.4V Li-ion machines
14.4V Li-ion machines
10.8V Li-ion machines
7.2V Li-ion machines
240V Li-ion quick charger, 22 minute charge time
110V Li-ion quick charger, 22 minute charge time
Automotive charger 12-24V input, 22 minute charge time
240V Li-ion 10.8V charger, 50 minute charge time
240V Li-ion 7.2V charger, 30 minute charge time
18V and 14.4V Li-ion batteries*
18V and 14.4V Li-ion batteries*
18V and 14.4V Li-ion batteries*
10.8V Li-ion batteries
7.2V Li-ion batteries
Accessories
PART NUMBER
Impact drivers
194281-7
DESCRIPTION
TOOL MODEL NUMBER
Adjustable locator set with Ph2
use to control the depth of the screw head
194250-8
Keyless chuck sutable for impact drivers
with ¼” hex fitting
Autofeed screwdrivers
194500-1
Extention handles
Chain saws
158476-6
Replacement guide bar
P-19928
Replacement chain
194524-7
Pruning extention
194523-9
Pruning extention
Torch / lamp
A-30542
Replacament bulb set
A-83973
Replacament bulb set
B-07303
Replacament bulb set
SM00000050
Replacament florescent tube
Battery
194649-7
Battery protector
BTD140, BTD142, BTD130,
BTD132, BTP140, BTP130
BTD140, BTD142, BTD130,
BTD132, BTP140, BTP130
BFR540, BFR550, BFR750
BUC121,BUC122
BUC121,BUC122
BUC121
BUC122
BML185
BML145
BML184
BML184
18V and 14.4V
Li-ion batteries
BL1830 and BL1430
MAKITA ACCESSORIES
made for the best
*To charge stick, Ni-Cad and Ni-MH type batteries the 193947-6 adaptor will be required.
www.makitauk.com
29
Every Makita Tool is thoroughly inspected
and tested before leaving the factory and is
guaranteed to be free of defects from
workmanship and materials for the period of
ONE YEAR from the date of original
purchase. Should any trouble develop during
this one year period, return the COMPLETE tool, freight
prepaid, to EITHER an Authorised Makita Service Agent OR
to Makita (UK) Ltd. If inspection shows the trouble is caused
by defective workmanship or material, Makita will repair
WITHOUT CHARGE.
This guarantee does not apply where:
•
Repairs have been made or attempted by others.
•
Repairs are required because of normal wear and tear.
•
The tool has been abused, misused or improperly
maintained.
•
Alterations have been made to the tool.
•
This guarantee does not affect your statutory rights.
WARNING: COUNTERFEIT TOOLS
Many fake Makita Tools are being offered for sale.
Don’t fall for the short term saving, they are low quality,
without warranty, and have a minimal professional life.
Buy only genuine Makita Tools through a reputable dealer.
Dealer stamp
Makita UK
Michigan Drive, Tongwell, Milton Keynes, Buckinghamshire MK15 8JD
T: 01908 211678 F: 01908 211400
Satisfying the professional’s needs
www.makitauk.com
98N300 0109