Miele G 6305 SCU White Futura Dimension Operating and Installation Instructions

Add to my manuals
88 Pages

advertisement

Miele G 6305 SCU White Futura Dimension Operating and Installation Instructions | Manualzz

Operating Instructions

Dishwasher

To prevent accidents and machine damage, read these instructions be‐ fore installation or use.

en-US HG05 M.-Nr. 10 014 130

Contents

IMPORTANT SAFETY INSTRUCTIONS................................................................. 5

Guide to the dishwasher ..................................................................................... 14

Appliance overview................................................................................................ 14

Control panel.......................................................................................................... 15

Display functions.................................................................................................... 16

Caring for the environment ................................................................................. 17

Disposal of packaging material.............................................................................. 17

Disposal of your old appliance .............................................................................. 17

Energy-saving dishwashing ................................................................................... 17

Before using for the first time............................................................................. 18

Opening the door................................................................................................... 18

Closing the door .................................................................................................... 18

Child safety lock .................................................................................................... 18

Basic settings......................................................................................................... 19

Before using the appliance for the first time, you require:..................................... 21

Dishwasher salt...................................................................................................... 21

Filling the salt reservoir ..................................................................................... 22

Salt refill indicator ............................................................................................. 23

Rinse aid ................................................................................................................ 24

Adding rinse aid ................................................................................................ 24

Rinse aid indicator ............................................................................................ 25

Loading the dishwasher ...................................................................................... 26

Tips ........................................................................................................................ 26

Loading examples.................................................................................................. 28

Upper basket ......................................................................................................... 32

Adjusting the upper basket............................................................................... 33

Lower basket ......................................................................................................... 34

Grates and filters.................................................................................................... 36

Cutlery.................................................................................................................... 38

3D cutlery tray (depending on model)............................................................... 38

Cutlery basket (depending on model)............................................................... 39

Operation .............................................................................................................. 40

Detergent ............................................................................................................... 40

Adding detergent .............................................................................................. 41

Turning on .............................................................................................................. 42

Selecting a program............................................................................................... 42

Starting a program ................................................................................................. 43

Time display........................................................................................................... 43

Energy management.............................................................................................. 44

2

Contents

At the end of the program...................................................................................... 44

Turning off .............................................................................................................. 45

Unloading the dishwasher ..................................................................................... 45

Interrupting a program ........................................................................................... 46

Changing a program .............................................................................................. 46

Options.................................................................................................................. 47

Options .................................................................................................................. 47

FlexiTimer with EcoStart ........................................................................................ 48

Program overview ................................................................................................ 51

Settings menu ...................................................................................................... 53

Opening the Settings menu ................................................................................... 53

Language ............................................................................................................ 53

Time of day ............................................................................................................ 54

Water hardness ...................................................................................................... 55

Rinse aid ................................................................................................................ 56

EcoStart ................................................................................................................. 56

AutoOpen............................................................................................................... 58

Refill indicators....................................................................................................... 59

Check filters ........................................................................................................... 59

Soak....................................................................................................................... 59

Pre-Rinse ............................................................................................................... 59

Brightness.............................................................................................................. 59

Version info ............................................................................................................ 60

Showroom program ............................................................................................... 60

Factory default settings.......................................................................................... 60

Closing the Settings menu..................................................................................... 60

Cleaning and care ................................................................................................ 61

Cleaning the wash cabinet..................................................................................... 61

Cleaning the door and the door seal ..................................................................... 61

Cleaning the door front .......................................................................................... 62

Filter system........................................................................................................... 63

Cleaning the spray arms ........................................................................................ 65

Frequently Asked Questions ............................................................................... 66

Technical problems ................................................................................................ 66

Water intake fault ................................................................................................... 68

Water drainage fault............................................................................................... 69

General problems................................................................................................... 70

Noises .................................................................................................................... 71

Poor cleaning results.............................................................................................. 72

3

Contents

Frequently asked questions ................................................................................ 75

Cleaning the drain pump and non-return valve ..................................................... 75

Customer service................................................................................................. 76

Repairs................................................................................................................... 76

Warranty................................................................................................................. 76

Optional accessories........................................................................................... 77

Installation Instructions .......................................................................................... 79

Electrical connection........................................................................................... 80

Water connection................................................................................................. 82

Connection to the water supply............................................................................. 82

Drainage................................................................................................................. 83

Sound emission testing ....................................................................................... 84

4

IMPORTANT SAFETY INSTRUCTIONS

This dishwasher complies with current safety requirements. Inap‐ propriate use can, however, lead to personal injury and damage to property.

To avoid the risk of accidents and damage to the dishwasher, please read the installation plan and the operating instructions carefully before it is installed and used for the first time. They con‐ tain important information on its installation, safety, use and main‐ tenance.

Keep the installation plan and the operating instructions in a safe place and pass them on to any future owner.

Miele cannot be held liable for damage caused by non-compli‐ ance with this information.

5

IMPORTANT SAFETY INSTRUCTIONS

Correct use

 This dishwasher is intended for use in domestic households and similar residential environments.

 This dishwasher is not suitable for outdoor use.

 It must only be used as specified in these operating instructions for cleaning domestic dishware and cutlery. Any other usage is not supported by the manufacturer and could be dangerous.

 This appliance is not intended for use by persons (including chil‐ dren) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge.

6

IMPORTANT SAFETY INSTRUCTIONS

Safety with children

 Children must be kept away from the appliance unless they are constantly supervised.

 Children should be supervised to ensure that they do not play with the appliance. Keep small children away from the appliance at all times to avoid the risk of injury. There is the risk that children may lock themselves in the dishwasher.

 If the automatic door opening mechanism (depending on model) is active keep young children away from the area in which the door opens. Danger of injury in the unlikely event of a fault with the open‐ ing mechanism.

 Danger of suffocation! Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children.

 Keep children away from detergents. Dishwasher detergents can cause burning in the mouth, nose and throat if swallowed, or inhibit breathing. Keep children away from the dishwasher when the door is open. There could still be detergent residues in the cabinet. Seek medical attention immediately if your child has swallowed or inhaled detergent.

7

IMPORTANT SAFETY INSTRUCTIONS

Technical safety

 Installation, repair, and maintenance work should only be per‐ formed by a Miele-authorized service technician. Work by unquali‐ fied persons could be dangerous and may void the warranty.

 Before installation, check the dishwasher for visible signs of dam‐ age. Under no circumstances should you use a damaged dishwash‐ er. A damaged dishwasher could be dangerous.

 The electrical safety of this appliance can only be guaranteed when continuity is complete between it and an effective grounding system. It is most important that this basic safety requirement is present and regularly tested and, where there is any doubt, the elec‐ trical system in the house should be checked by a qualified electri‐ cian.

Miele cannot be held liable for the consequences of an inadequate grounding system (e.g. electric shock).

 Reliable and safe operation of this dishwasher can only be assur‐ ed if it has been connected to the electrical supply.

 The dishwasher must only be plugged into the electricity supply via a suitable switched socket using a 3-pin plug with a grounding contact (it must not be hard-wired). The electrical socket must be easily accessible after the dishwasher is installed so that it can be disconnected from the electricity supply at any time.

 There must be no electrical sockets behind the dishwasher. There is a danger of overheating and fire risk if the dishwasher is pushed up against a plug.

 The dishwasher must not be installed under a cooktop. The high radiant temperatures which are sometimes generated by a cooktop could damage the dishwasher. For the same reason, it should not be installed next to open fires or other appliances which give off heat, such as heaters, etc.

8

IMPORTANT SAFETY INSTRUCTIONS

 To avoid the risk of damage to the dishwasher, make sure that the connection data on the data plate (fuse rating, voltage, and frequen‐ cy) matches the electrical supply before connecting the dishwasher to the mains. Consult a qualified electrician if in any doubt.

 Do not connect the dishwasher to the electrical supply until it has been fully installed and any adjustment has been made to the door springs.

 Do not connect the appliance to the electrical supply by a multisocket adapter or an extension lead. These do not guarantee the re‐ quired safety of the appliance (e.g. danger of overheating).

 The dishwasher may only be operated if the door opening mecha‐ nism is working correctly. Otherwise there could be a risk of danger while the automatic door opening mechanism (depending on model) is active.

To check that the door opening mechanism is working correctly:

– The door springs must be adjusted equally on both sides. They are correctly adjusted when the door remains stationary when left half open (approx. 45° opening angle). It is also important that the door cannot fall open.

– The door locking pins automatically retract when the door opens at the end of the drying phase.

 This appliance must not be installed and operated in a non-sta‐ tionary location (e.g., on a ship).

 Do not install the dishwasher in a room where there is a risk of frost. Frozen hoses may burst or split. The reliability of the electronic module may be impaired at temperatures below freezing point.

 The water pressure (flow pressure at the connection point) must be between 4.35 - 145 psi.

 A damaged appliance could be dangerous. If the dishwasher gets damaged, turn off the electrical supply and contact Miele.

9

IMPORTANT SAFETY INSTRUCTIONS

 The manufacturer's warranty will be invalidated if the appliance is not repaired by a Miele-authorized service technician.

 Defective components should be replaced by Miele original parts only. Only with these parts can the manufacturer guarantee the safe‐ ty of the appliance.

 During installation, maintenance and repair work, the appliance must be disconnected from the electrical supply (turn it off and with‐ draw the plug from the socket).

 If the connection cable is damaged, it must be replaced with a special cable of the same type (available from Miele) by a Miele-au‐ thorized service technician only.

10

IMPORTANT SAFETY INSTRUCTIONS

Proper installation

 The dishwasher must be installed and connected in compliance with the installation plan.

 Be careful when installing the dishwasher. Wear protective gloves to avoid injury on any sharp metal components.

 The dishwasher must be correctly aligned horizontally to ensure problem-free operation.

 In order to ensure stability, built-under and integrated dishwash‐ ers must only be installed under a continuous counter which is se‐ cured to adjacent cabinetry.

 If you want to convert your freestanding dishwasher to a built-un‐ der ("U") model, you will need to order the appropriate conversion kit. If you remove the existing toe-kick, you must replace it with a Umodel plinth. This is necessary to avoid the risk of injury caused by protruding metal parts.

 The door springs must be adjusted equally on both sides. They are correctly adjusted when the door remains stationary when left half open (approx. 45° opening angle). It is also important that the door cannot fall open.

The appliance may only be used with correctly adjusted door springs.

11

IMPORTANT SAFETY INSTRUCTIONS

Proper use

 Do not use solvents in the dishwasher. Danger of explosion!

 Do not inhale or ingest powder detergent. Dishwasher detergents contain irritant or corrosive ingredients which can cause burning in the nose, mouth, and throat if swallowed, or inhibit breathing. Seek medical attention immediately if detergent has been swallowed or in‐ haled.

 Avoid leaving the door open unnecessarily as someone could trip over it and be injured by it.

 Do not sit or lean on the opened door. This could cause the dish‐ washer to tip and be damaged, and you could get injured.

 Dishes can be very hot at the end of a program. Allow them to cool until they are comfortable enough to handle before unloading.

 Only use detergent and rinse aid formulated for domestic dish‐ washers. Do not use dishwashing liquid.

 Do not use commercial or industrial detergents as these may cause damage, and there is a risk of a severe explosive chemical re‐ action (such as an explosive oxyhydrogen gas reaction).

 Do not fill the rinse aid reservoir with powder or liquid detergent.

This will cause serious damage to the reservoir.

 Inadvertently filling the salt reservoir with powder or liquid dish‐ washer detergent will damage the water softener. Make sure you have picked up the correct packet of dishwasher salt before filling the salt reservoir!

 Only use special coarse grained dishwasher salt for reactivation.

Do not use other salts such as cooking salt, agricultural grade or gritting salt. These may contain insoluble additives which can impair the functioning of the water softener.

12

IMPORTANT SAFETY INSTRUCTIONS

 In an appliance with a cutlery basket (depending on model), cut‐ lery is cleaned and dried more efficiently if placed in the basket with the handles downwards. However, to avoid the risk of injury, place knives and forks with the handles upwards.

 Plastic items which cannot withstand being washed in hot water, such as disposable plastic containers or plastic cutlery should not be cleaned in the dishwasher. The high temperatures in the dish‐ washer may cause them to melt or lose shape.

 If you use the "FlexiTimer/Delay Start" option (depending on mod‐ el), make sure that the dispenser is dry before adding detergent.

Wipe dry if necessary. Detergent will clog if poured into a damp dis‐ penser and may not be thoroughly dispersed.

 Please observe the information given in "Technical data" regard‐ ing the capacity of the dishwasher.

Accessories

 Use only genuine original Miele parts. If spare parts or accesso‐ ries from other manufacturers are used, the warranty may become invalid.

Disposal of your old dishwasher

 Make the door lock inoperative so that children cannot acciden‐ tally shut themselves in. Remove or destroy the locking bracket of the door lock, and make appropriate arrangements for the disposal of the appliance.

SAVE THESE INSTRUCTIONS AND PASS THEM ON TO ANY FUTURE USER

13

Guide to the dishwasher

Appliance overview a Upper spray arm (not visible) b Cutlery tray (depending on model) c Upper basket d Middle spray arm e Air intake for drying (depending on model) f Lower spray arm g Filter system h Data plate i Rinse aid reservoir j Dual compartment detergent dis‐ penser k Reservoir for dishwasher salt

14

Control panel

Guide to the dishwasher a Program selection b Display c Option buttons with indicator lights d Start button with indicator light e Arrow buttons  f OK button g  button - FlexiTimer with indicator light h Program selection button  i  (On/Off) Button

These operating instructions apply to several different dishwasher models with different heights.

The specific dishwasher models are referred to as follows:

Standard = 31 11/16" (80.5 cm) high dishwashers (integrated) and 33 1/4" (84.5 cm) high dishwashers (freestanding)

XXL = 33 1/4" (84.5 cm) high dishwashers (integrated)

15

Guide to the dishwasher

Display functions

General information

The display is used to select or set the following:

– The program

– The FlexiTimer (Delay Start)

– The Settings menu

The display can show the following:

– The current time of day

– The program stage

– The estimated time left for the pro‐ gram to run

– Any relevant fault messages and in‐ formation

To save energy, the dishwasher switches off after a few minutes if you do not press any buttons during this time.

To switch the dishwasher back on again, press the  button.

Settings menu

The Settings menu is used to adapt the electronic module of the dishwasher to changing requirements. See the "Set‐ tings menu" chapter for more informa‐ tion on accessing the settings menu.

The arrows in the display indicate addi‐ tional options. You can use the  ar‐ row buttons underneath the display, as appropriate, to select these options.

The OK button is used to confirm a message or setting and also to move to the next menu or another level.

The option which is selected will have a check  next to it.

To exit a sub-menu, use the  arrow buttons to select the

Back 

option in the display and confirm your choice with OK.

If you do not press any of the buttons for several seconds, the display with re‐ turn to the previous level. You may need to enter your settings again.

16

Caring for the environment

Disposal of packaging material

The cardboard box and packaging pro‐ tect the appliance during shipping.

These materials are biodegradable and recyclable. Please recycle.

Disposal of your old appliance

Old appliances may contain materials that can be recycled. Please contact your local recycling authority about the possibility of recycling these materials.

Please be sure that your old appliance does not pose a danger to children while being stored for disposal.

Energy-saving dishwashing

This dishwasher is economical in the use of water and electricity. For best re‐ sults follow these tips:

– For most economical dishwashing, make full use of the baskets without overloading the dishwasher.

– Choose a program that best suits the degree of soiling and the type of dishes being washed.

– Select the Economy program (de‐ pending on model) for energy-saving dishwashing. This program is the most efficient in terms of its com‐ bined energy and water consumption at cleaning normally soiled dishware.

– Follow the detergent manufacturer's recommendations on detergent dos‐ age.

– When using powder or liquid deter‐ gent, you can use 1 /

3

less detergent if baskets are only half full.

– The dishwasher can be connected to a hot water supply for further econo‐ mies. If the water is heated by for ex‐ ample, solar panels, this would be energy efficient.

However, if your water is heated by electricity we would recommend con‐ nection to cold water.

You can find additional tips on energysaving dishwashing in "Miele's guide to dishwashing".

17

Before using for the first time

Opening the door

At the end of programs with a drying phase (see "Program overview"), the door will open automatically a little in order to help the drying process.

This function can be deactivated if pre‐ ferred (see "Settings menu -

AutoOpen").

Closing the door

 Push the baskets in.

 Then lift the door upwards and push until it clicks into position.

 Danger of crushing injuries!

Do not put your hand inside the door as it is closing.

Child safety lock

Use the safety lock to prevent children from opening the dishwasher door.

 To open the door, reach under the door grip and pull.

 Open the door fully so that the door catch rail retracts again.

If the door is opened during operation, all functions are automatically interrupt‐ ed.

 Water in the dishwasher may be hot. Danger of scalding!

Only open the door during operation if absolutely necessary and exercise extreme caution when doing so.

 Keep the area around the door free of obstructions.

 To lock the door, push the slide un‐ derneath the door grip to the right.

 To unlock the door, push the slide to the left.

18

Before using for the first time

Basic settings

 Turn the dishwasher on with the  button.

The welcome screen will appear when the dishwasher is turned on for the first time.

Language

The display will change automatically to the screen for setting the language.

 Use the  arrow sensors to select the language you want and also the country, if appropriate, and confirm your selection with OK.

To learn about the display, read the section with the same name.

A check  will appear next to the lan‐ guage that has been set.

Time of day

The display will then change to the screen for setting the time.

The time of day needs to be set before the "FlexiTimer" program option can be used.

You can also show the current time of day in the display.

 Use the  arrow buttons to set the hour and confirm with OK.

 Then set the minutes and confirm with OK.

Keeping the  arrow buttons press‐ ed will increase or decrease the time automatically.

The display will then change to the screen for setting the clock display.

 Select whether or not the time of day should appear in the display and confirm your selection with OK.

 If you have selected Display On

, con‐ firm the message about higher ener‐ gy consumption with OK.

19

Before using for the first time

Water hardness

The display changes to the water hard‐ ness setting.

– The dishwasher must be program‐ med for the water hardness in your area.

– Your local water supplier can tell you the water hardness level in your area.

– Where the water hardness fluctuates e.g. between 10 - 16 gr/gal (10 - 15

°d), always program the dishwasher to the higher value (16 gr/gal or 15 °d in this example).

It is useful to know your water hardness so that you can provide the service technician with this information in the event of any service calls.

Enter the water hardness below:

____________ gr/gal (°d)

The dishwasher is programmed at the factory for a water hardness level of 1 gr/gal (1 °d).

 Use the  arrow buttons to select the hardness of your water supply and confirm with OK.

See "Settings menu - Water hardness" for more information.

The message

Set-up successfully completed

will then appear in the display.

After confirming this with OK, the prompts  Refill salt and  Refill rinse aid may appear.

 Add salt and rinse aid if necessary

(see "Before using for the first time -

Dishwasher salt" and "Rinse aid").

 Confirm the messages with OK.

The program selected will appear briefly in the display and the appropriate indi‐ cator light will come on.

Then, the display will show the estimat‐ ed program duration for the program selected.

These basic settings will be saved in memory after the dishwasher has been through one complete program.

20

Before using the appliance for the first time, you require:

– Approx. 2 qt (2 l) of water

– Approx. 2 kg (4 lbs) of dishwasher salt

– Domestic dishwasher detergent

– Rinse aid formulated for domestic dishwashers

Every dishwasher is tested at the fac‐ tory. There will be residual water in the appliance from this test. It is not an in‐ dication that it has been used previ‐ ously.

Dishwasher salt

In order to achieve good cleaning re‐ sults, the dishwasher needs to operate with soft water. Hard water results in a build-up of calcium deposits on dish‐ ware and in the dishwasher.

Water supplies with a hardness level higher than 4 gr/gal (4 °d) needs to be softened. This takes place automatical‐ ly in the integrated water softener. The water softener in the dishwasher is suit‐ able for a water hardness level of up to

73 gr/gal (70 °d).

The water softener requires dishwasher salt.

Depending on the water hardness level

(< 22 gr/gal or 21 °d), dishwasher salt is not required if combination tablets are being used (see "Operation - Deter‐ gent").

Before using for the first time

If the water in your area is very soft and constantly lower than 5 gr/gal

(5 °d) you do not have to add dish‐ washer salt. The prompt to add salt will be switched off automatically.

 Dishwasher detergent will de‐ stroy the water softener.

Do not fill the salt container with dishwasher detergent (even liquid detergent).

 Use only special, coarse-grained dishwasher salt or other pure kitchen salt.

Other types of salt may contain in‐ soluble components which can dam‐ age the water softener.

21

Before using for the first time

Filling the salt reservoir

Important! Before filling the salt res‐ ervoir with dishwasher salt for the first time, you must fill it with approx.

2 qt (2 l) of water to enable the salt to dissolve.

Once the dishwasher has been used for the first time, there is always suf‐ ficient water in the reservoir.

 Remove the lower basket and un‐ screw the salt reservoir cap.

Water will run out of the reservoir when the cap is removed.

It should therefore only be removed in order to refill the salt reservoir.

 Fill the reservoir with approx. 2 qt (2 l) of water (first use only).

 Place the funnel provided over the salt reservoir and carefully fill with salt until the reservoir is full. The salt reservoir holds approx. 4 lbs (2 kg) of salt depending on the brand used.

 Clean any excess salt from around the reservoir opening and then screw the cap on again firmly.

 Immediately after filling the salt reser‐ voir, run the Express program with the Short program option selected and without any dishware in the dish‐ washer to remove any traces of salt from the cabinet.

22

Salt refill indicator

 Fill the salt reservoir with dishwasher salt for reactivation when 

Refill salt appears in the display (If it appears during a program, wait until the end of the program).

 Confirm with OK.

The salt refill indicator will go out.

 Risk of corrosion!

Immediately after filling the salt res‐ ervoir, run the Express program with the Short program option selected and without any dishware in the dishwasher to remove any traces of salt from the cabinet.

After the salt reservoir has been filled, the refill indicator may still appear in the display if the salt concentration has not yet reached the correct level. If this is the case, confirm again with OK.

The salt refill indicator will be switched off if you have programmed the dish‐ washer for a water hardness below 5 gr/gal (5 °d).

Before using for the first time

If you only ever use Tab products in your dishwasher, you can switch off both refill indicators for salt and rinse aid if you wish (see "Settings menu -

Switching off the refill indicators").

If you switch to using detergent that does not contain salt or rinse aid, it is important to remember to add dishwasher salt and rinse aid and to switch the indicators back on.

23

Before using for the first time

Adding rinse aid Rinse aid

Rinse aid is needed to prevent spotting on dishes and glassware. The rinse aid is filled in the reservoir and the set amount will be automatically dosed.

 Filling the rinse aid reservoir with detergent will damage the reservoir.

Only pour rinse aid formulated for residential dishwashers into the res‐ ervoir.

When using "Tab" detergents rinse aid is not needed.

 Press the button on the lid of the rinse aid reservoir in the direction of the arrow until the flap springs open.

24

Before using for the first time

 Add rinse aid only until it is visible in the opening.

The rinse aid reservoir holds approx.

3.7 oz. (110 ml).

 Close the flap firmly so that it clicks into place. Otherwise water can enter the rinse aid reservoir during a pro‐ gram.

 Wipe up any spilled rinse aid. This prevents over-foaming occurring dur‐ ing the next program.

You can adjust the rinse aid dosage for best results (see "Settings menu -

Rinse aid").

Rinse aid indicator

When the  Refill rinse aid message ap‐ pears in the display, the reservoir con‐ tains sufficient rinse aid for 2 - 3 pro‐ grams only.

 Add rinse aid.

 Confirm with OK.

The rinse aid refill indicator will go out.

If you only ever use Tab products in your dishwasher, you can turn off both refill indicators for salt and rinse aid if you wish (see "Settings menu - Turn‐ ing off the refill indicators").

25

Loading the dishwasher

Tips

Remove coarse food residues from the dishware.

There is no need to rinse items under running water!

 Do not wash items soiled with ash, sand, wax, grease, or paint in the dishwasher. These will damage the dishwasher.

Dishware can be loaded anywhere in the baskets, but the following notes should be observed:

– Do not place dishes or cutlery inside other pieces. They will cover each other.

– Load the dishware so that water can access all surfaces. This ensures that they get properly cleaned.

– Make sure that all items are securely positioned.

– Hollow items such as cups, glasses, pans, etc. must be inverted in the basket.

– Tall, narrow, hollow items, e.g., champagne glasses, should be placed in the center of the basket to ensure better water coverage.

– Concave items such as mugs or bowls should be placed at an angle so that the water can run off.

– The spray arms must not be blocked by items which are too tall or hang through the baskets. If in doubt, test for free movement by manually rotat‐ ing the spray arms.

– Make sure that small items cannot fall through the holders in the bas‐ kets.

Small items, e.g., lids, should there‐ fore be placed in the cutlery tray or cutlery basket (depending on model).

Some foods may contain natural dyes, e.g., carrots, tomatoes or to‐ mato sauce. Plastic items in the dishwasher may discolor if large quantities of these foodstuffs find their way into the dishwasher on the dishware. The stability of plastic items is not affected by this discolor‐ ation.

Cleaning silver cutlery in the dish‐ washer may also cause plastic items to discolor.

26

Loading the dishwasher

Items not recommended for dish‐ washing

– Wooden cutlery, cutting boards and dishware or items with wooden parts

– Craft items, antiques, valuable vases, and decorative glassware

– Plastic items which are not heat-re‐ sistant: the high temperatures in the dishwasher may cause them to melt or lose shape.

– Copper, brass, tin and aluminum items may discolor or become matt.

– Colors painted over a glaze may fade after a number of washes.

– Delicate glassware and glassware containing lead crystal: clouding may occur over time.

Please note:

Silverware previously cleaned with a silver polish may still be damp or spot‐ ted at the end of a program, where wa‐ ter has not run off smoothly. It may need to be rubbed dry with a soft cloth.

Silver which has been in contact with foods containing sulphur can discolor.

These include egg yolk, onions, mayon‐ naise, mustard, fish, and marinades.

 Aluminum components (e.g., range hood grease filters) must not be cleaned with a commercial or in‐ dustrial cleaning agent.

These may damage the material.

Tip: When purchasing new dishware and cutlery, make sure they are dish‐ washer-safe.

Glass care

– Clouding may occur on glasses after frequent washing. If delicate glass‐ ware is washed in the dishwasher, ensure that only very low tempera‐ tures are used (see program chart), or a special glass-care program is used

(depending on model). This will re‐ duce the risk of clouding.

– Purchase glassware which is dish‐ washer-safe (e.g., Riedel glassware).

– Use detergents with glass protective additives (e.g., Miele CareCollection tabs).

– Visit "http://www.mieleglass‐ care.com/international/en/glasscare/ english" for more information on glass care.

27

Loading the dishwasher

Loading examples

Loading for 10 standard place settings with cutlery tray

Upper basket Lower basket

Cutlery tray (depending on model)

28

Loading the dishwasher

Loading for 16 standard place settings with cutlery tray

Upper basket Lower basket

Cutlery tray (depending on model)

29

Loading the dishwasher

Loading for 10 standard place settings with cutlery basket

Upper basket Lower basket

Cutlery basket

30

Loading the dishwasher

Loading for 13 standard place settings with cutlery basket

Upper basket Lower basket

Cutlery basket

31

Loading the dishwasher

Upper basket

 For safety reasons, do not oper‐ ate the dishwasher without the upper and lower baskets in place (except when running the Tall items program, if available).

Adjustable cup rack (depending on model)

 Raise the rack to make room for tall items.

Glasses can be arranged along the po‐ sitioning rail of the cup rack to give them some support during the pro‐ gram.

 Lower the cup rack and lean the glasses against it, or double stack smaller pieces.

 Use the upper basket for small, light‐ weight and delicate items such as cups, saucers, glasses, dessert bowls, etc.

Shallow pans or casserole dishes can also be placed in the upper basket.

 Long items such as soup ladles, mix‐ ing spoons, and long knives should be placed lying down across the front of the upper basket.

32

Loading the dishwasher

Adjusting the upper basket

In order to gain more space for taller items the upper basket can be adjusted on three levels with 3/4" (2 cm) be‐ tween each level.

The upper basket can also be set at an angle with one side high and the other side low. Make sure, however, that the basket can slide smoothly in and out of the cabinet.

 Pull the upper basket out.

To raise the upper basket:

 Lift the basket until it clicks into place.

To lower the upper basket:

 Pull upwards on the levers at either side of the upper basket.

 Adjust the basket to the desired height and then push the levers se‐ curely back down into position.

Depending on the setting of the upper basket, the following plate dimensions can be accommodated.

Dishwashers with cutlery basket

(see data plate for model number)

Upper basket adjust‐ ment

Plate  in inches (cm)

Upper basket

Stand‐ ard

XXL

Upper 7 7/8"

(20)

Middle 8

11/16"

(22)

Lower 9 7/16"

(24)

9 7/16"

(24)

10 1/4"

(26)

11" (28)

Lower basket

12 3/16"

(31) 13

3/4" (35*)

11 7/16"

(29)

10 5/8"

(27)

Dishwashers with cutlery tray

(see data plate for model number)

Upper basket adjust‐ ment

Middle

Plate  in inches (cm)

Upper basket

Stand‐ ard

XXL

Upper 7 7/8"

(15)

6

11/16"

(17)

Lower 7 1/2"

(19)

7 1/2"

(19)

8 1/4"

(21)

9 1/16"

(23)

Lower basket

12 3/16"

(31) 13

3/4" (35*)

11 7/16"

(29)

10 5/8"

(27)

* When tilted, plates of up to 13 3/4" (35 cm) can be accommodated (see "Lower bas‐ ket").

Depending on the setting of the upper basket, a variety of plate dimensions can be accommodated.

33

Loading the dishwasher

Lower basket Removable MultiComfort insert

The rear section of the lower basket is used for washing cups, glasses, plates, pots and pans.

You can remove the MultiComfort insert to make more room for larger items such as casserole dishes.

Removing the insert

 Pull the yellow handle forwards and remove the insert.

Refitting the insert

 For larger and heavier items such as plates, serving platters, saucepans, bowls, etc.

Glasses, cups and small items such as saucers can also be placed in the lower basket. Do not place thin, deli‐ cate glassware in the lower basket.

 Place large platters and dishes in the center of the lower basket.

When tilted, plates up to 13 3/4" (35 cm) in diameter can be accommodated.

34

 Fit the insert into the lower basket with the hooks under the long crosspiece .

 Press down on the insert until it clicks into position .

Glass rack

 The glass rack can be raised to make more room for tall items.

 Stem glassware, e.g. wine glasses or champagne flutes, can be leaned against the glass rack or suspended from it.

You can set the glass rack at two differ‐ ent heights.

Loading the dishwasher

Hinged spikes (depending on model)

The spikes at the front are used for washing plates, soup bowls, platters, dessert bowls, and saucers.

The spikes can be lowered to make more room for large items, e.g. pots, pans and dishes.

 Slide the glass rack to the desired height until the catches click into place at the top.

 Press the yellow lever downwards , and then lower the spikes .

35

Loading the dishwasher

Grates and filters

You can also wash Miele grates, the

Miele griddle plate, and Miele range hood filters.

 Select the Grates & Filters program for optimum dishwashing results.

 Protruding parts can damage the dishwasher.

Load the dishwasher in such a way that no corners protrude over the side of the basket.

 Heavy and sharp wash loads can damage the coating of the basket struts.

Load grates, griddle plates, and fil‐ ters carefully.

 Only place dishwasher safe

Miele grates, filters and gill plates in the dishwasher.

Grates

 Rust damages the dishwasher.

Wash only grates that are undam‐ aged and not rusty.

 Place the upper basket in the top po‐ sition.

 Load the grate in the bottom basket.

To do so, remove the MultiComfort insert and fold over the front row of spikes.

36

Griddle plate

 Load the griddle plate in the bottom basket. To do so. fold over the front row of spikes.

 Arrange the griddle plate with the grilling surface facing upwards to guarantee better drying.

Loading the dishwasher

Filters

You can wash two range hood filters in the upper basket and two in the bottom basket at once.

If you only want to wash two filters, put them in the upper basket.

Upper basket

Lower basket

 Be careful when unloading the filters. At the end of the program, the filters may still contain hot water.

37

Loading the dishwasher

Cutlery

3D cutlery tray (depending on model)

 Arrange the cutlery in the tray as shown.

To make unloading much easier, cutlery should be grouped in zones, one for knives, one for forks, one for spoons, etc.

Spoon heads should be placed in con‐ tact with at least one of the serrated re‐ tainers on the base of the cutlery tray to ensure that water runs off them freely.

The upper spray arm must not be blocked by items which are too big.

The side sections of the tray can be moved into the middle to accommodate tall items of dishware in the upper bas‐ ket.

If spoon handles do not fit between the holders, lay them the other way round.

You can use the yellow slide to adjust the height of the middle section of the cutlery tray to make more room for large items of cutlery, such as serving spoons and ladles.

38

Cutlery basket (depending on model)

Loading the dishwasher

The cutlery basket can be placed any‐ where on the front rows of spikes in the lower basket.

 To avoid the risk of injury, knives and forks should be placed with the han‐ dles upwards in the basket. However, cutlery placed handle down in the basket will come out cleaner and dri‐ er.

 Place small items of cutlery in the in‐ dividual slots on three sides of the cutlery basket.

Cutlery insert for the cutlery basket

Use the insert supplied for heavily soiled items of cutlery. The insert sepa‐ rates the items so that they can be more easily accessed by water.

 Fit it onto the cutlery basket if re‐ quired.

 Insert cutlery with the handles facing downwards.

 Distribute them evenly along the in‐ sert.

39

Operation

Detergent

 Only use detergents formulated for domestic dishwashers.

Refer to the manufacturer's packaging as to whether Tab products are suitable for the water hardness level in your area.

Please note that the cleaning and dry‐ ing results of Tab detergents can vary greatly.

For optimum cleaning and drying re‐ sults, use Miele dishwasher detergent and add Miele salt and Miele rinse aid separately. See "Optional accesso‐ ries."

Detergent dosage

 Follow the dosage recommended by the manufacturer on the packaging.

 Unless directed otherwise, use one detergent tab or add 1 1/4 - 2 table‐ spoons (20 - 30 ml) detergent to compartment II, depending on the level of soiling. With very heavy soil‐ ing you can also add a small amount of detergent to compartment l.

 Tabs may not dissolve completely when the Express program (if availa‐ ble) is used.

Use only the recommended amount of detergent. Continued use of too much detergent may cause machine damage.

 Dishwasher detergents can cause burning in the nose, mouth, and throat if swallowed, or inhibit breathing.

Avoid inhaling or swallowing dish‐ washer detergent. Keep children away from detergent. Keep deter‐ gent out of the reach of children.

Keep children away from the dish‐ washer when the door is open. There could still be detergent residues in the dishwasher. Only add detergent just before starting the program and lock the door with the child safety lock (depending on model).

40

Operation

Adding detergent

 Press the opening catch on the de‐ tergent dispenser. The flap will spring open.

The flap is always open at the end of a program.

 Add the required amount of detergent and close the flap.

 Make sure that the detergent packag‐ ing is properly closed after use to avoid it getting damp and becoming lumpy.

Dispensing aid

Compartment I holds a maximum of 2 teaspoons (10 ml),

Compartment II holds a maximum of

3.5 tablespoons (50 ml) of detergent.

The marks in compartment II indicate the levels of approximately 1 ¼ and 2 tablespoons (20 and 30 ml) respective‐ ly. The marks indicate the approximate fill level in ml when the door is open in a horizontal position.

41

Operation

Turning on

 Make sure the spray arms are not ob‐ structed.

 Close the door.

 Turn on the water supply if it is turned off.

 Press the  button for at least 2 sec‐ onds.

The program selected will appear briefly in the display and the appropriate indi‐ cator light will come on.

Then, the display will show the estimat‐ ed program duration for the program selected.

Selecting a program

Choose your program according to the type of load and the degree of soiling.

The different programs and their uses are described in the Program Over‐ view chapter.

 Use the program selection button  to select the program required.

The indicator light of the selected pro‐ gram will come on.

Additional programs can be selected using the Additional  option.

 Use the program selection button  to select the Additional  option.

The first of the additional programs will appear in the display.

 Use the  arrow buttons to select the program required.

During the course of the program, you can use OK to display the name of the program which is currently running.

You can now select program options

(see "Options").

If any program options are selected, the appropriate indicator lights will also light up.

42

Starting a program

The dishwasher can be started only if the door is closed.

 Press the Start or OK button.

The program will begin.

The Start indicator light will come on.

A program should only be canceled in the first few minutes, if at all. Oth‐ erwise important program stages could be omitted.

Operation

Time display

The estimated duration of the program selected appears in hours and minutes in the display before the program be‐ gins. During the program, the time left until the end of the program is dis‐ played.

Each program stage is indicated by a symbol:

 Pre-wash / Soak

 Main wash

 Interim rinse

 Final rinse

 Drying

 Finish

The program duration displayed may vary with the same program. It is influ‐ enced by, among other things, the wa‐ ter temperature at each intake, the re‐ activation process, the type of deter‐ gent, the amount of dishware, and the amount of soiling.

When a program is selected for the first time, the display shows an average time for a cold water intake.

The times shown in the program over‐ view refer to standard test loads and temperatures.

Each time a program is run, the elec‐ tronic module calculates the program duration required according to the tem‐ perature of the water taken into the dishwasher and the amount of dish‐ ware.

43

Operation

Energy management

To save energy, the dishwasher will switch off automatically 10 minutes af‐ ter the last time a button has been pressed or after the end of a program.

 Press the  button to switch the dishwasher back on.

The dishwasher will not turn off auto‐ matically if the time of day display has been activated (see "Settings menu -

Time of day").

The dishwasher will not switch off while a program or the FlexiTimer is running or if there is a fault.

At the end of the program

The program has finished when 

End appears in the display and the door has opened slightly (if applicable).

The drying fan may continue to run for a few minutes at the end of the pro‐ gram.

 Open the door fully so that the door catch rail retracts again.

You can now empty the dishwasher.

 If you have deactivated the auto‐ matic door opening function (see

"Settings menu - AutoOpen"), but would still like to open the door at the end of the program, make sure that you open the door fully.

Otherwise steam from the dishwash‐ er could damage the edge of the counter because the fan is no longer running.

44

Operation

Turning off

At the end of a program:

 The dishwasher can be switched off at any time using the  button.

Turning the dishwasher off during a pro‐ gram stops the program.

Turning the dishwasher off during the run-up to a delay start time (FlexiTimer) will also stop the process.

If the dishwasher is not going to be used for a longer period of time, e.g., while on vacation, the water supply should be closed.

Unloading the dishwasher

Dishes tend to break and chip more easily when they are hot. Allow the dishes to cool until they are comforta‐ ble enough to handle before unloading them.

The dishes will cool much faster if you open the door when the program has ended.

First unload the lower basket, then the upper basket, and finally the cutlery tray (depending on model).

This will prevent water drops from the upper basket and cutlery tray from fall‐ ing onto the dishes in the lower basket.

45

Operation

Interrupting a program

A program will be interrupted as soon as the door is opened.

 Close the door and press the Start button.

The program will continue from the point at which it was interrupted.

 Water in the dishwasher may be hot. Danger of scalding!

Only open the door if absolutely nec‐ essary and exercise extreme caution when doing so. Before closing the door again, leave it ajar for approx.

20 seconds. This will enable the tem‐ perature in the wash cabinet to set‐ tle. After that, close the door and press the Start button.

Changing a program

If the detergent dispenser flap has already opened, do not change the program.

If a program has already started and you wish to change it, proceed as fol‐ lows:

 Turn the dishwasher off with the  button.

 Turn the dishwasher on again with the  button.

 Select the program you want, and then start it.

46

Options

Options

You can select and deselect the options using the appropriate buttons and the display.

 Turn the dishwasher on with the  button.

The Start indicator light flashes.

 Select a program.

 Press the button for the option you want.

The indicator light for the relevant but‐ ton will come on if the option is availa‐ ble for the program selected.

If the option is not compatible with the program selected, a message to this ef‐ fect will appear in the display.

 In this instance, confirm the message with OK.

 Press the Start button to start the program.

The option selected will remain active for that particular program until the set‐ ting is changed.

Short

The Short option reduces the duration of programs in which this option is available by up to 30%.

In order to achieve optimum cleaning results, energy consumption may in‐ crease slightly with this option.

When used in combination with the

Rapid program, the Short option results in a wash program without drying or au‐ tomatic opening of the door (if availa‐ ble).

Extra economical

The Extra Economical option reduces the energy consumption of programs in which this option is available by up to

20%.

In order to achieve optimum cleaning results, the program duration is extend‐ ed with this option.

47

Options

FlexiTimer with EcoStart

The FlexiTimer  gives you three ways of starting the program by means of de‐ laying the start. You can set the start time or the finish time of a program.

You also have the option of taking ad‐ vantage of time variable economy rates of electricity using the

EcoStart

function.

When using the delay start function, make sure that the detergent com‐ partment is dry before adding deter‐ gent. Wipe dry with a cloth if neces‐ sary. If the compartment is wet, powder detergent can become lum‐ py and stick to the dispenser, with the result that it is not fully dis‐ pensed.

Do not use liquid detergent when se‐ lecting delay start, as it can run into the dishwasher before it is required.

 To prevent children coming into contact with dishwasher detergent:

Do not fill the detergent dispenser until just before starting the pro‐ gram, i.e., before you activate the

FlexiTimer with OK. Also activate the child safety lock.

 Switch the dishwasher on with the  button.

The Start indicator light flashes.

 Select the desired program.

 Press the  button.

You can use the  arrow buttons to select the

Start at

,

Finish at

, or

EcoStart function or

Back 

.

 Confirm selection of the function you want with OK.

The current time of day will appear and the hour number block will be highlight‐ ed.

You can now enter the time you want using the  arrow buttons and con‐ firm with OK.

If, while you are setting the time, you do not press any buttons for several sec‐ onds, the display will revert to the previ‐ ous menu. You will then have to enter your settings again.

If the time of day (clock) display has been switched off (see "Settings menu

- Time of day"), the display will go out after a few minutes and only the Start indicator light will flash slowly.

Press any button to switch the display back on again for a few minutes.

48

Start at

With the

Start at

function, you set the exact time at which you want the pro‐ gram to start.

 Use the  arrow buttons to set the hour and confirm with OK.

The hour will be saved and the minute number block will be highlighted.

 Use the  arrow sensors to set the minutes and confirm with OK.

The saved start time for the program selected will appear in the display.

The Start indicator light will come on.

When the set time is reached, the pro‐ gram selected will start automatically.

The time remaining will appear in the display, the  indicator light will go out and the Start indicator light will light up.

Options

Finish at

With the

Finish at

function, you set the time at which you wish the program to end.

 Use the  arrow buttons to set the hour and confirm with OK.

The hour will be saved and the minute number block will be highlighted.

 Use the  arrow sensors to set the minutes and confirm with OK.

The estimated start time for the pro‐ gram selected will appear in the display.

The Start indicator light will come on.

A message will appear in the display if the program cannot be completed by the set finish time because it has too long a running time.

When the estimated time is reached, the program selected will start automat‐ ically.

The time remaining will appear in the display, the  indicator light will go out and the Start indicator light will light up.

49

Options

EcoStart

The

EcoStart

function allows you to take advantage of time variable economy rates of electricity. Before you can use this option, you must set up to three electricity rate time zones (see "Settings menu - EcoStart").

You then set the latest time at which the program selected should end.

The dishwasher will start automatically in the cheapest rate zone within the time set.

 Use the  arrow buttons to set the hour and confirm with OK.

The hour will be saved and the minute number block will be highlighted.

 Use the  arrow sensors to set the minutes and confirm with OK.

The estimated start time of the program selected will appear in the display.

The  and Start indicator lights will light up.

The program selected will start auto‐ matically in the cheapest time zone and will finish at the latest at the finish time set.

The time remaining will appear in the display, the  indicator light will go out and the indicator light for the program selected will light up.

Changing or deleting set times

You can change the set times or the program before the start time in the dis‐ play is reached.

 Press the  button.

 Use the  arrow buttons to select the setting you want to change and confirm with OK.

 Use the  arrow buttons to select the Change or Delete function and confirm with OK.

After confirming the Change function, you can change the set time.

After confirming the

Delete

function, the program duration will appear in the dis‐ play and the program will start.

The  indicator light will go out and the

Start indicator light will light up.

If you open and close the door again before the start time is reached, the message Continue with Start will appear in the display. Press the Start button to restart the FlexiTimer.

50

Program When to use

Normal

Pots &

Pans

China &

Crystal

Program for regular use to completely wash a full load of normally soiled dish‐ ware with the ability to ad‐ just energy and water con‐ sumption based on the soil load of the dishware.

For heavily soiled dishware and normally soiled pots, pans and utensils with dried on residue; use 20% more detergent than rec‐ ommended.

GlassCare program for temperature-sensitive glasses and dishes with light soiling. Use 50% of the detergent amount.

SaniWash To sanitize dishware, e.g.

baby bottles, cutting boards and preparation dishware.

Express "Quick program" for lightly soiled dishware, e.g. party dishware or to remove salt traces from the wash cabi‐ net after refilling salt; not suitable for detergent tabs.

Prewash

If re‐ quired

2X

X

Program overview

Program sequence

Main wash

Interim rinse

Final rinse

X If re‐ quired

X

Drying

X

X

X

X

X

X

X

2X

X

X

X

X

X

X

X

X

X

51

Program overview

Program When to use

Prewash

Program sequence

Main wash

Interim rinse

Final rinse

Pre-wash To rinse dishes when a complete program is not needed.

Extra Quiet Extra quiet program for mixed loads with standard, slightly dried-on food resi‐ due with a longer program duration.

Grates and filters

Wash program for cleaning

Miele grates, the Miele griddle plate, and Miele range hood filters.

Clean Ma‐ chine

Special cleaning program to remove grease deposits from the dishwasher.

X

X

X

X

X

X

X

2X

X

X

X

Consumption: The consumption values refer to a hot-water connection.

Electric power: 0.01 - 1.5 kWh

Water: 1.1 - 5.7 gal. (4 - 21.6 l)

Drying

X

X

X

52

Settings menu

Adjusting default values

Opening the Settings menu

 Switch the dishwasher off with the  button if it is switched on.

 Press and hold the Start button pressed.

 Turn the dishwasher on with the  button. Release this button as soon as the background lighting lights up in the display. Keep the Start button pressed for at least 4 seconds.

The first option in the Settings menu will appear in the display.

To learn about the display, read the section with the same name.

 Use the  arrow buttons under‐ neath the display to select the option you want to change and confirm your selection with OK.

Sub-menu options which have already been selected will have a check  be‐ side them.

 To exit a sub-menu, use the  ar‐ row buttons to select

Back 

and confirm with OK.

The display will revert to the menu above.

Language 

The display can be set to appear in one of several different languages.

You can change the language in the display via the

Language 

sub-menu.

 Select the language you want as well as the country, if appropriate, and confirm with OK.

The flag after the word

Language  acts as a guide if a language which you do not understand has already been set.

If this is the case, keep selecting the option which has a flag after it until you reach the

Language 

sub-menu.

53

Settings menu

Time of day

The dishwasher is delivered with the time of day (clock) display deactivated.

To save energy, the dishwasher will turn off automatically a few minutes after the last time a button has been pressed or after the end of a program.

Setting the time of day (clock) dis‐ play

When the time of day (clock) display has been activated, the current time of day will appear in the display a few mi‐ nutes after the last time a button has been pressed or after the end of a pro‐ gram. This increases energy consump‐ tion.

 Select the Display option and confirm with OK.

 Select the setting you want and con‐ firm with OK.

 If you have selected On

, confirm the message about higher energy con‐ sumption with OK.

Setting the clock format

You can select either a 24-hour or 12hour clock.

 Select the Clock format option.

 Select the setting you want and con‐ firm with OK.

Setting the clock

You can set the current time of day.

The current time of day must be set be‐ fore you can use the "FlexiTimer" pro‐ gram option.

 Select the Set

option.

 Set the hour with the  arrow but‐ tons and confirm with OK.

Then set the minutes and confirm with OK.

The time of day has now been saved.

54

8

9

10

5

6

7

°d

1

2

3

4

Water hardness

This appliance is fitted with a water softener.

The dishwasher must be programmed for the water hardness in your area.

– The dishwasher must be program‐ med for the water hardness in your area.

– Your local water supplier can tell you the water hardness level in your area.

– Where the water hardness fluctuates e.g. between 10 - 16 gr/gal (10 -

15 °d), always program the dish‐ washer to the higher value (16 gr/gal or 15 °d in this example).

 Select the water hardness level for your area and confirm your selection with OK.

A check  will appear beside the wa‐ ter hardness which has been set.

8

9

10

5

6

7 gr/gal

1

2

3

4

14

16

18

9

11

13

°f

2

4

5

7

8

9

10

5

6

7

Display

1

2

3

4

26

27

28

29

30

21

22

23

24

25

16

17

18

19

20

°d

11

12

13

14

15

36

37-45

46-60

61-70

31

32

33

34

35

Settings menu

26

27

28

29

30

21

22

23

24

25

16

17

18

19

20

Display

11

12

13

14

15

36

37-45

46-60

61-70

31

32

33

34

35

47

49

50

52

54

38

40

41

43

45

29

31

32

34

36

°f

20

22

23

25

27

56

58

59

61

63

65

66-80

82-107

109-125

27

28

29

30

31

22

23

24

25

26

17

18

19

20

21 gr/gal

11

13

14

15

16

38

39--47

48-63

64-73

32

33

34

35

36

55

Settings menu

Rinse aid

You can adjust the rinse aid dosage for best results.

The rinse aid dosage is set in stages from 0 to 6.

It is set to 3 at the factory.

The dosage can turn out to be higher than the set value due to the automatic adjustment of the Automatic program.

If spots appear on dishware and glass‐ ware:

– Increase the rinse aid dosage.

If clouding or smearing appears on dishware and glassware:

– Decrease the rinse aid dosage.

 Select the setting you want and con‐ firm your choice with OK.

EcoStart

In order to run your dishwasher in the most economical way, you can use the

EcoStart

option to take advantage of your electricity supplier's time variable rates (see "Options - FlexiTimer with

EcoStart").

With this option selected, your dish‐ washer will start automatically at your electricity supplier's cheapest rate times.

To use this option, you must first set up to three electricity rate time zones in which the dishwasher can start. You can allocate different priorities to these time zones. The time with the cheapest electricity rate will be given Priority 1.

Contact your electric supplier to find out the times of the cheapest electricity rates.

Once the electricity rate times have been set, you can use the

EcoStart

op‐ tion to set the latest finish time required for each program.

The dishwasher will then start automati‐ cally in the cheapest electricity rate time and the program will end at the lat‐ est at the finish time set.

56

Settings menu

Setting the electricity rate times

Before you can use the

EcoStart

option, you must set at least one electricity rate time.

 Use the  arrow buttons to select the electricity rate time (R1-R3) you want to set and confirm with OK.

The start of the electricity rate time se‐ lected will appear in the display and the hour number block will be highlighted.

 Use the  arrow buttons to set the hours and minutes for the start time and confirm both with OK.

The end of the electricity rate time se‐ lected will appear in the display and the hours number block will be highlighted.

 Use the  arrow buttons to set the hours and minutes for the end time and confirm both with OK.

The electricity rate time will be saved and its priority will appear in the dis‐ play.

 Use the  arrow buttons to set the priority you want and confirm with

OK.

 Confirm the message with OK.

The electricity rate time will be activat‐ ed.

Changing the electricity rate times

You can change the start, finish or pri‐ ority of an electricity rate time.

 Use the  arrow buttons to select the electricity rate time (R1-R3) you want to change and confirm with OK.

 Select the setting you want to change and confirm with OK.

 Use the  arrow buttons to change the setting and confirm with OK.

 Confirm the message with OK.

The change will be saved.

57

Settings menu

Deleting the electricity rate times

 You can delete the settings for an electricity rate time and in doing so deactivate the EcoStart option for this time zone.

 Use the  arrow buttons to select the electricity rate time (R1 - R3) you want to delete and confirm with OK.

 For example, select Delete R1

and confirm with OK.

 For example, select Delete R1?

and confirm with OK.

The settings for the electricity rate time selected will be reset.

 Confirm the message with OK.

The electricity rate time has now been deleted.

AutoOpen

At the end of programs with a drying phase (except Extra Quiet ) the door will open automatically a little in order to help the drying process (see "Program overview").

In the ECO program (depending on mode), the door will open automatically during the drying phase.

This function can be deactivated if wished.

 Select the setting you want and con‐ firm with OK.

 If you have deactivated the auto‐ matic door opening function and would like to open the door as soon as the program has finished, make sure that you open the door fully.

Otherwise steam from the dishwash‐ er could damage the edge of the counter because the fan is no longer running.

58

Settings menu

Refill indicators

If you consistently use a Tab detergent and the refill indicators for salt and rinse aid are bothering you, you can deacti‐ vate them if you wish.

 Select the setting you want and con‐ firm with OK.

If you switch to using detergent that does not contain salt or rinse aid, it is important to remember to add dishwasher salt and rinse aid and to switch the indicators back on.

Check filters

You can adjust the interval at which the message to remind you to check the fil‐ ters appears.

You can set an interval between 30 and

60 program cycles.

The "Check filters" message is set at the factory to appear after every 50 pro‐ gram cycles.

 Select the interval you want and con‐ firm this with OK.

Soak

You can use this function to loosen dried-on food residues in the program selected.

Once activated, this function will be carried out with all programs until you deactivate it.

If you are using powder dishwasher de‐ tergent, add approx. 5 g to compart‐ ment I.

 Select the setting you want and con‐ firm with OK.

Pre-Rinse

You can use this function to remove easily loosened food residues in the program selected.

Once activated, this function will be carried out with all programs until you deactivate it.

 Select the setting you want and con‐ firm with OK.

Brightness

There are seven different display bright‐ ness settings.

 Select the brightness you want and confirm this with OK.

59

Settings menu

Version info

You can call the electronic software ver‐ sion of your dishwasher for technical support purposes.

 Confirm the display with OK.

Showroom program

For demonstration purposes only.

The dishwasher is fitted with various demonstration programs for showroom use.

Demo mode

Demonstration program for show‐ rooms.

– Demo with sound

This program activates the circulation pump to demonstrate the sound of the dishwasher.

Demo Drying Plus

The door will open automatically.

– BrilliantLight

The interior lighting is on constantly.

Factory default settings

You can reset all settings to the factory default settings.

 Select Reset

and confirm with OK.

Closing the Settings menu

You can exit the Settings menu using

Close

.

 Select Close and confirm with OK.

The program selected will appear in the display briefly and the indicator light for the program selected will come on.

60

Cleaning and care

Check and clean your dishwasher regularly. This will help avoid prob‐ lems and faults.

 All surfaces are susceptible to scratching.

Contact with unsuitable cleaning agents can alter or discolor all surfa‐ ces.

Cleaning the wash cabinet

Generally, the wash cabinet is self cleaning if the correct amount of deter‐ gent is used.

If, however, there are lime scale or grease deposits in the cabinet, these can be removed with a special dish‐ washer cleaner (see "Optional accesso‐ ries"). Follow the instructions on the packaging.

If you mainly use low temperature pro‐ grams (< 120°F/50 °C), there is a risk of bacteria and unpleasant odors building up in the wash cabinet. To prevent this happening the dishwasher will automat‐ ically increase the temperature in the fi‐ nal rinse of the selected program after several programs using low tempera‐ tures have been run.

 Clean the filters in the wash cabinet regularly.

Cleaning the door and the door seal

Bacteria could build up on the door seal and the sides of the dishwasher door as these surfaces are outside the wash cabinet and are not accessed and cleaned by the spray arm jets.

 Wipe the door seals regularly with a damp cloth to remove food deposits.

 Wipe off any food or drink residues which may have dripped onto the sides of the dishwasher door before closing it.

61

Cleaning and care

Cleaning the door front

 If soiling remains longer, it may happen that the surfaces can be‐ come discolored or changed.

Remove any soiling immediately.

 Clean the front with a solution of warm water and a little dishwashing liquid applied with a soft sponge.

Wipe the surfaces dry using a soft cloth.

 Glass cleaners may be used to clean the exterior. However do not allow them to sit or "puddle", this can cause damage to the surface.

Remove the cleaner promptly.

To better maintain your appliance avoid the following:

– Cleaning products containing soda, ammonia, acid, or chloride

– Descaling agents

– Abrasive cleaning products, such as scouring powder, scouring liquid, or pumice stones,

– Cleaners containing solvents

– Stainless steel cleaners

– Dishwasher cleaner

– Oven cleaners

– Glass cleaner

– Hard, abrasive brushes or sponges, e.g., pot scourers, brushes or spong‐ es which have been previously used with abrasive cleaning agents

– Eraser sponges

– Sharp metal scrapers

– Steel wool

– Steam cleaning appliances

62

Cleaning and care

Filter system

The filter system in the base of the wash cabinet prevents food from being redeposited on dishes. It also protects the circulation pump from damage caused by foreign objects.

 This dishwasher must not be used without all the filters in place!

Collection of coarse soil may cause the filters to clog. The level of soiling and time it takes before the filters need cleaning will vary depending on use.

The message

Check filters

will appear in the display after every 50 program cy‐ cles (factory default setting).

You can set the interval for the "Check filters" message to appear to a value between 30 and 60 program cycles (see

"Settings menu - Check filters").

 Check the filter system.

 Clean it if necessary.

 Then confirm the message with OK.

The message will go out.

Filter system

 Turn the dishwasher off.

 Turn the handle counter-clockwise to release the filter system .

 Lift the filter system out of the dish‐ washer . Remove any coarse parti‐ cles and rinse the filter well under running water.

Use a nylon brush if necessary.

 Ensure that course soil does not get into the circulation system and cause a blockage.

63

Cleaning and care

To clean the inside of the filter, the flap must be opened:

 Press catches  together in the di‐ rection of the arrows as shown, and open the filter .

 Rinse all the filters under running wa‐ ter.

 Then close the flap so that the catch engages.

 Replace the filter system so that it lies flat in the base of the wash cabi‐ net.

 Then turn the handle clockwise until both arrows point towards each oth‐ er. This will lock the filter system in place.

 Take care when you are fitting the filter system that it is secured in position correctly.

Otherwise coarse soil could get into the circulation system and cause a blockage.

64

Cleaning and care

Cleaning the spray arms

Particles of food can get stuck in the spray arm jets and bearings. The spray arms should therefore be inspected and cleaned regularly (approx. every 4 - 6 months).

 Turn the dishwasher off.

Remove the spray arms as follows:

 Take out the cutlery tray (if your dish‐ washer is fitted with one).

 Push the top spray arm upwards to engage the inner ratchet. Then un‐ screw the spray arm.

 Pull the lower spray arm firmly up‐ wards to remove it.

 Push the middle spray arm upwards

 to engage the ratchet. Then un‐ screw the spray arm .

 Remove the lower basket.

 Use a pointed object to push the food particles that are stuck in the spray arm jets into the spray arm.

 Rinse the spray arms thoroughly un‐ der running water.

 Replace the spray arms and check that they rotate freely.

65

Frequently Asked Questions

With the help of the following guide, minor faults in the performance of the appli‐ ance, some of which may result from incorrect operation, can be put right without contacting Miele Service. This will save time and money.

The following guide may help you to find the reason for a fault, and to correct it.

You should, however, note the following:

 Unauthorized or incorrect repairs could cause personal injury or damage to the appliance.

Repair work to electrical appliances must only be carried out by a suitably qualified and competent person in strict accordance with current local and na‐ tional safety regulations. The manufacturer cannot be held liable for unauthor‐ ized work.

Technical problems

Problem

The display remains dark and the Start indi‐ cator light is not flash‐ ing after the dishwasher has been turned on with the  button.

The dishwasher stops during a program.

The door locking pins do not retract after the door has opened auto‐ matically.

Possible cause and solution

The dishwasher is not plugged in.

 Insert the plug.

The circuit breaker has tripped.

 Reset the fuse (see data plate for the correct fuse rating).

The circuit breaker has tripped.

 Reset the fuse (see data plate for the correct fuse rating).

 If the circuit breaker trips again, contact Miele

Service.

There is a fault with the door mechanism or the door has not been correctly balanced.

 Contact Miele Service.

The AutoOpen function must be switched off be‐ fore the dishwasher is used again (see "Settings -

AutoOpen"). Danger of injury in the unlikely event of another fault.

66

Problem

One of the following fault messages is dis‐ played:

 Fault FXX

 Waterproof

 Fault F78

Frequently Asked Questions

Possible cause and solution

Before fixing the fault:

 Turn the dishwasher off with the  button.

There may be a technical fault.

After a few seconds:

 Turn the dishwasher back on.

 Select the desired program.

 Press the Start button.

If the error message is displayed again, there is a technical fault.

 Contact Miele Service.

The WaterProof System has reacted.

 Turn off the water supply.

 Contact Miele Service.

A fault has occurred in the circulation pump.

 Turn the dishwasher off for at least 30 seconds with the  button.

 Turn the dishwasher back on.

 Select the desired program.

 Press the Start button.

If the error message is displayed again, there is a technical fault.

 Contact Miele Service.

67

Frequently Asked Questions

Water intake fault

Problem

One of the following fault messages is dis‐ played:

 Open water supply

Possible cause and solution

 Intake

The following message appears in the display during the Energy Saver program:

 Intake temp. low

The water supply is turned off.

 Turn on the water supply all the way.

Before fixing the fault:

 Turn the dishwasher off with the  button.

There is a problem with the water intake.

 Turn on the water supply fully and start the pro‐ gram again.

 Clean the water intake filter (see "Frequently asked questions").

 The water pressure at the intake is lower than 4.35

psi.

Contact a plumber.

The intake water has not reached the required tem‐ perature of 120°F (45°C) (see "Water connection -

Water intake").

 Start the program again.

 If the fault message appears again, select a differ‐ ent program.

68

Frequently Asked Questions

Water drainage fault

Problem

The following fault mes‐ sage is appears in the display:

 Drain

Possible cause and solution

Before fixing the fault:

 Turn the dishwasher off with the  button.

There is a problem with the water intake.

There might be water in the wash cabinet.

 Clean the filter system (see "Cleaning and care -

Filter system").

 Clean the drain pump (see "Frequently asked questions").

 Clean the non-return valve (see "Frequently asked questions").

 Remove any kink or loop in the drain hose.

69

Frequently Asked Questions

General problems

Problem

The indicator lights and display are dark.

Detergent residue is left in the dispenser at the end of a program.

The dispenser cover cannot be closed.

The inside of the door and/or the interior walls are wet after a program has finished.

Water remains in the wash cabinet at the end of a program.

Possible cause and solution

The dishwasher has switched off automatically to save energy.

 Turn the dishwasher on again with the  button.

The dispenser was still damp when detergent was added.

 Make sure the dispenser is dry before adding de‐ tergent.

Detergent residue is blocking the latch.

 Remove the detergent residue.

This is caused by the drying system and does not in‐ dicate a fault. The moisture will dissipate after a while.

Before fixing the fault:

 Turn the dishwasher off with the  button.

The filter system in the wash cabinet is clogged.

 Clean the filter system (see "Cleaning and care -

Filter system").

The drain pump or non-return valve is blocked.

 Clean the drain pump or the non-return valve (see

"Frequently asked questions").

The drain hose is kinked.

 Remove the kink.

70

Frequently Asked Questions

Noises

Problem

There is a knocking noise in the wash cabi‐ net.

There is a rattling noise in the wash cabinet.

There is a knocking noise from the water pipe

Possible cause and solution

A spray arm is hitting the dishware.

 Interrupt the program, and rearrange the items which are obstructing the spray arm.

Dishware is moving around in the wash cabinet.

 Interrupt the program and rearrange loose pieces.

A foreign object (e.g., a cherry pit) has become lodged in the drain pump.

 Remove the foreign object from the drain pump

(see "Maintenance - Cleaning the drain pump and non-return valve").

This may be caused by the installation or the diame‐ ter of the water pipe.

 This has no influence on dishwasher function. If in doubt, contact a suitably qualified plumber.

71

Frequently Asked Questions

Poor cleaning results

Problem

The dishes are not clean.

Smearing appears on glassware and cutlery.

There is a bluish sheen on the surface of glass‐ ware; film can be wiped off.

Possible cause and solution

The dishes were not loaded correctly.

 See notes in "Loading the dishwasher".

The program was not powerful enough.

 Select a more intensive program (see "Program overview").

Not enough detergent was dispensed.

 Use more detergent, or change your detergent.

Items are blocking the path of the spray arms.

 Rearrange the items so that the spray arms can rotate freely.

The filter system in the base of the wash cabinet is not clean or is not correctly fitted.

This may cause the spray arm jets to get blocked.

 Clean and/or fit the filter system correctly.

 Clean the spray arm jets if necessary (see "Clean‐ ing and care - Cleaning the spray arms").

The non-return valve is open and blocked. Dirty water has flowed back into the wash cabinet.

 Clean the drain pump and the non-return valve

(see "Frequently asked questions").

The rinse aid dosage is set too high.

 Reduce the dosage (see "Settings menu - Rinse aid").

72

Frequently Asked Questions

Problem

Dishware is not dry or cutlery and glasses are spotty.

Possible cause and solution

The rinse aid dosage is set too low or the rinse aid reservoir is empty.

 Replenish the reservoir, increase the dosage, or change the brand of rinse aid (see "Before using for the first time - Rinse aid").

Dishware was taken out of the cabinet too soon.

 Leave it in for longer (see "Operation").

Combination tabs have been used which have im‐ paired drying performance.

 Change your detergent, or replenish the rinse aid

(see "Before using for the first time - Rinse aid").

Detergent deposits.

 Switch to another detergent.

Glasses have a brown‐ ish-blue discoloration; the deposit cannot be wiped off.

Glasses are dull and discolored; the deposit cannot be wiped off.

Tea or lipstick stains have not been com‐ pletely removed.

Plastic parts are discol‐ ored.

The glassware is not dishwasher-safe. The surfaces are affected.

 There is no remedy.

Purchase glassware which is dishwasher-safe.

The wash temperature of the selected program was too low.

 Select a program with a higher wash temperature.

The bleaching effect of the detergent is too low.

 Switch to another detergent.

Natural dyes, e.g., from carrots, tomatoes, or ketchup may be the cause. The amount of detergent used or its bleaching effect was not sufficient to deal with natural dyes.

 Use more detergent (see "Operation - Detergent").

Discoloration is irreversible.

73

Frequently Asked Questions

Problem

White residue is visible on dishware and cut‐ lery, clouding occurs on glassware; this film can be wiped off.

There are rust stains on the cutlery.

Possible cause and solution

The rinse aid dosage is too low.

 Increase the dosage (see "Settings menu - Rinse aid").

The salt reservoir is empty.

 Fill the salt reservoir (see "Before using for the first time - Dishwasher salt").

The salt reservoir cap has not been screwed on cor‐ rectly.

 Replace it, making sure that it screws back on correctly.

An unsuitable Tab detergent has been used.

 Change your detergent.

The water softener is programmed to too low a water hardness level.

 Program the water softener to a higher water hard‐ ness level (see "Settings menu - Water hardness").

The affected items are not corrosion resistant.

 There is no remedy.

Purchase cutlery which is dishwasher-safe.

A program was not run after dishwasher salt was added. Traces of salt have got into the wash cycle.

 Always run the Express program with the Short program option selected and without any dishware in the dishwasher after adding dishwasher salt.

The salt reservoir cap has not been screwed on cor‐ rectly.

 Replace it, making sure that it screws back on correctly.

74

Frequently asked questions

Cleaning the drain pump and non-return valve

If the water has not been pumped away at the end of a program, the drain pump or the non-return valve might be blocked. They are, however, easy to clean.

 Turn off the dishwasher and pull the plug.

 Take the filter system out of the wash cabinet (see "Cleaning and care -

Cleaning the filters").

 Scoop the water out of the cabinet using a suitable container or utensil.

The drain pump is beneath the non-re‐ turn valve (see arrow).

 Remove all foreign objects from the drain pump (glass or bone splinters).

Before returning the non-return valve, check that the drain pump is not blocked. Spin the propeller sever‐ al times in both directions to check for obstructions.

 Carefully reinsert the non-return valve and secure it with the locking clamp.

 Make sure the locking clamp clicks into place!

 Press the catch for the non-return valve inwards .

 Lift the non-return valve up and out

 and rinse well under running water.

 Remove all foreign objects from the non-return valve.

 Be careful not to damage any delicate components when cleaning the drain pump and the non-return valve.

75

Customer service

Repairs

For problems that you cannot resolve on your own, please contact:

– your Miele dealer or

– Miele Service

The telephone number for Miele is listed at the back of these instruc‐ tions.

In the event of a fault which you cannot correct yourself please contact the

Miele Service Department at the phone number on the back of this booklet.

Warranty

For more information, please refer to the included warranty.

MieleCare (USA only)

MieleCare, our Extended Service Con‐ tract program, gives you the assurance of knowing that your appliance invest‐ ment is covered by 5 years of worry free ownership.

MieleCare is the only Extended Service

Contract in the industry that guarantees repairs by a Miele Authorized Service

Provider using genuine Miele parts. On‐ ly genuine Miele parts installed by fac‐ tory trained professionals can guaran‐ tee the safety, reliability, and longevity of your Miele appliance.

Please note that unless expressly ap‐ proved in writing by Miele’s Service de‐ partment, Extended Service Contracts offered by other providers for Miele products will not be recognized by

Miele. Our goal is to prevent unauthor‐ ized (and untrained) service personnel from working on your Miele products, possibly doing further damage to them, you and/or your home.

To learn more about MieleCare Extend‐ ed Service Contracts, please contact your appliance dealer or visit us online at: http://www.mieleusa.com

76

Optional accessories

Dishwasher detergent and rinse aid, as well as cleaning and care products, are available as optional accessories.

All the products are designed for use with Miele dishwashers.

These and many other useful products can be ordered via the Miele website or from Miele (see end of this manual for contact details).

Dishwasher detergent, rinse aid, and salt

When you decided to buy a Miele dish‐ washer, you chose excellent quality and performance. However, ensuring that your dishwasher always delivers the best possible results will also depend on your choice of dishwasher deter‐ gent, rinse aid, and dishwasher salt, as cleaning results can vary depending on the brand used.

With Miele CareCollection products, you can be sure of optimum results as these products have been specially de‐ signed for Miele dishwashers.

Detergent tabs

– Sparkling results even with stubborn food deposits

– Combination product with other components such as rinse aid, salt, and glass protection additives

– Phosphate-free - safe for the envi‐ ronment

– Water-soluble wrapping - no need to unwrap

Powder detergent

– With active oxygen for thorough cleaning

– With enzymes which are effective even in low temperature programs

– With glass protection against corro‐ sion

Rinse aid

– For gleaming glasses

– Helps dishware to dry

– With glass protection against corro‐ sion

– Specially designed cap for precise, easy dispensing

Dishwasher salt

– Prevents lime scale on dishware and in the appliance

– Extra coarse-grained

77

Optional accessories

Dishwasher care products

Miele cleaning and care products pro‐ vide optimum care for your dishwasher.

Dishwasher cleaner

– Cleans the dishwasher effectively and thoroughly

– Removes grease, bacteria, and un‐ pleasant odors

– Ensures excellent dishwashing re‐ sults

Dishwasher descaler

– Removes heavy lime scale deposits

– Mild and gentle with natural citric acid

Dishwasher conditioner

– Removes odors, lime scale, and light deposits

– Maintains the elasticity and leak tightness of the seals

Dishwasher freshener

– Neutralizes unpleasant odors

– Fresh, pleasant lime and green tea scent

– Easy to attach to the dishwasher basket

– Very economical, lasts for 60 wash cycles

Accessories

Some accessories may be supplied as standard, depending on model.

Cappuccinatore insert

The Cappuccinatore insert can be used for cleaning the individual parts of the

Miele Cappuccinatore in the dishwash‐ er.

Cutlery basket

The cutlery basket is placed in the low‐ er basket and can be used to wash ad‐ ditional items of cutlery.

Glassware rack

This rail is designed to hold glasses with stems securely in the lower basket.

78

Installation Instructions

Please refer to the Installation Diagram supplied with these instructions.

To comply with IEC sound testing protocols, please contact Miele for additional instructions.

Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information.

79

Electrical connection

Installation, repairs and other work by unqualified persons could be dangerous.

Check that the voltage, frequency and fuse rating shown on the data plate match the household mains supply.

The power outlet must be accessible after installation. Do not use an ex‐ tension cord to connect the dish‐ washer to the mains. Danger of over‐ heating! See data plate on the right side of the door.

A damaged power cord must only be replaced with a genuine Miele cord by a Miele service technician.

Grounding instructions

THIS APPLIANCE MUST BE

GROUNDED.

In the event of a malfunction or break‐ down, grounding will reduce the risk of electric shock by providing a path of least resistance for the electrical cur‐ rent. This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into an appropri‐ ate outlet that is installed and grounded in accordance with all local codes and ordinances.

Improper connection of the equip‐ ment grounding conductor can result in electric shock.

Do not modify the plug provided with the appliance; if it will not fit the out‐ let, have a proper outlet installed by a qualified electrician.

If there is any question concerning the proper electrical connection or grounding of this appliance to the powersupply, please consult a li‐ censed electrician or call Miele’s

Technical Service Department:

USA: 1-800-999-1360

CDN: 1-800-565-6435

Specifications

The dishwasher comes equipped with a

4 ft (1.2 m) powercord with a molded plug for connection to 120 V, 60 Hz,

15 A grounded receptacle.

80

Electrical connection

Hardwired electrical connection

It is possible to hardwire this appliance to an existing power cable.

CAUTION: Before servicing, discon‐ nect the power supply by either re‐ moving the fuse, shutting off the power main or manually "tripping" the circuit breaker.

Installation work and repairs should only be performed by a qualified technician in accordance with all ap‐ plicable codes and standards. Re‐ pairs and service by unqualified per‐ sons could be dangerous and the manufacturer cannot be held re‐ sponsible.

Before connecting the appliance to the power supply, make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. This da‐ ta must correspond to prevent ma‐ chine damage. Consult an electrician if in doubt.

GROUNDING INSTRUCTIONS

THIS APPLIANCE MUST BE

GROUNDED.

This appliance must be connected to a grounded metal, permanent wiring sys‐ tem, or an equipment-grounding con‐ ductor must be run with the circuit con‐ ductors and connected to the equip‐ ment-grounding terminal or lead on the appliance.

Prior to making a hardwire connec‐ tion to the terminal, remove the pow‐ ercord. Otherwise there will be a risk of electric shock from the attached plug.

An existing flexible supply cord or cable shall have a minimum thickness of

AWG 14.

120 V, 60 Hz, 15 A fuse rating

Black wire (live): connect to L

White wire (neutral): connect to N

Green wire (ground): connect to 

After attaching the permanent power supply cord, check that all screws on the terminal block and the strain re‐ lief are tightened.

81

Water connection

Connection to the water sup‐ ply

 Water in the dishwasher must not be used as drinking water.

– The dishwasher may be connected to a cold or hot water supply up to a maximum of 140°F/60°C.

We would only recommend connec‐ tion to a hot water supply if it is eco‐ nomical, e.g. a solar-powered supply.

When connected to a hot water sup‐ ply, all program stages which would otherwise be carried out with cold water will be carried out with hot wa‐ ter.

– The

Energy Saver

program (if availa‐ ble) requires a hot water supply be‐ tween 115°F/45°C (minimum) and

140°F/60°C (maximum).

The higher the water intake tempera‐ ture, the better the cleaning and dry‐ ing results.

– The intake hose is approx. 4' 11"/

1.5 m long. A 1.5 m long flexible met‐ al extension hose (pressure tested to

2,030 psi) is available as an optional accessory, if required.

– A faucet with a 3/8" male thread must be provided on site.

– This appliance is constructed to comply with ANSI/ASSE 1001 //

IEC/EN/DIN 61770 // VDE 0700 Part

600, and may be connected to a suit‐ able supply without an extra non-re‐ turn valve if national regulations per‐ mit.

– Water pressure: Must be between

4.5 - 145 psi (0.3 - 10 bar) If the wa‐ ter pressure is lower than this, the fault message Intake will appear in the display (see "Frequently asked questions"). If the water pressure is too high, a pressure reducer valve must be fitted.

After connecting the dishwasher to the water supply, check that the wa‐ ter intake is airtight.

 pliance, the dishwasher must only be connected to fully vented pipework.

To avoid any damage to the ap‐

The intake hose must not be shortened or damaged in any way as it contains electrical components.

82

Water connection

Drainage

– The machine comes equipped with a built-in non-return valve on the dis‐ charge side to prevent waste water from flowing back into the dishwash‐ er.

– Take the drain line of the dishwasher and attach the drain line as high as possible under the counter rim of the kitchen sink before connecting the end to the drain. The loop will serve to prevent a backed up drain or large volume of water in the sink from si‐ phoning back into the dishwasher.

– The dishwasher is supplied with ap‐ prox. 5' 11" (1.5 m) of flexible drain hose with an internal diameter of 7/8"

(22 mm).

– The drain hose can be extended us‐ ing extensions and adapters. The drainage length must not be longer than 13' 1 1/2" (4 m) and the delivery head must not exceed 3' 3 3/8"

(1 m).

– If the hose is to be directly fitted to the drainage outlet on site, use the hose clip supplied (see installation di‐ agram).

– The hose can be directed to the left or the right of the appliance.

– The on-site connector for the drain hose can be adapted to different widths of hose. If the connector pro‐ trudes too far into the drain hose, it will need to be shortened. Otherwise the drain hose may become blocked.

– The drain hose must not be short‐ ened.

 Make sure that there are no kinks in the hose, and that it is not squashed or stretched.

After servicing the appliance, ensure that the drain does not leak.

Venting the drain

If the on-site drain connection is situat‐ ed lower than the guide path for the bottom basket rollers in the open door, the drain must be vented. Otherwise a siphoning effect during a program can cause the appliance to empty itself of water.

 To vent: open the dishwasher door fully.

 Pull the lower spray arm firmly up‐ wards to remove it.

 Cut off the top of the vent valve in the wash cabinet.

83

Sound emission testing

Prerequisites for sound emission tests

Load the dishwasher with 16 standard place settings and use the Normal pro‐ gram.

Setup for sound emission tests

The dishwasher must be set up according to the following specifications.

 Install the dishwasher into an analyzing unit.

 Secure the front panel.

84

Sound emission testing

 Push the provided fleece strips (depending on model) under the toe-kick until it is flush with the appliance feet .

 Push the toe-kick into place in such a way that it is flush with the door front .

85

Sound emission testing

 Remove the protective film from the provided insulating strip (depending on model) .

 Push the insulating strip into the front top edge of the toe-kick .

86

87

Please have the model and serial number of your appliance available before contacting Technical Service.

U.S.A.

Miele, Inc.

National Headquarters

9 Independence Way

Princeton, NJ 08540

Phone: 800-843-7231

609-419-9898

Fax: 609-419-4298 www.mieleusa.com

Technical Service & Support

Nationwide

Phone: 800-999-1360

Fax: 888-586-8056

[email protected]

Canada

Importer

Miele Limited

Headquarters and Miele Centre

161 Four Valley Drive

Vaughan, ON L4K 4V8 www.miele.ca

Customer Care Centre

Phone: 800-565-6435

905-532-2272 [email protected]

Germany

Manufacturer

Miele & Cie. KG

Carl-Miele-Straße 29

33332 Gütersloh

G 6300 / G 6305

 en-US M.-Nr. 10 014 130 / 04

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents