Miele K 1903 Vi Specification Sheet

Fully Integrated
36” Refrigerator
K 1913 Vi / K 1903 Vi
8mieleusa.com
Fully Integrated 36” Refrigerator
K 1913 Vi / K 1903 Vi
FOR FLUSH INSTALLATION
25" m
84"
in.*
4"
35 3/
24 5/
8"
EPTS
ACC M
T
I
N
U
STO
A CU PANEL
T
N
FRO
O
10 1/
4"
Location Codes
E - 5 foot - 120 Volt - 15 Amp 3-wire molded plug power
supply connects lower left rear
O - Standard NEMA 5-15 Duplex Outlet - locate less than
9" above finished floor
4 1/8
"
6 5/8" - 8 1/2"
1 1/8
"
2" - 8 3/8"
E
83 1/2" - 85 3/8"
36"
Notes
• All Installations must be done in accordance with local codes
• Sides of adjoining cabinets should be filled (flush to frame) to
insure proper fit and finish
• For Proud Installation - please adjust accordingly
* Depth assumes a 3/4” panel, please adjust according to
custom panel thickness
K 1913 Vi / K 1903 Vi
Page 2 of 4
Fully Integrated 36” Refrigerator
K 1913 Vi / K 1903 Vi
CUSTOM INSTALLATIONS
These units do not come equipped with a front panel. They are designed to accept a custom door panel supplied by
the cabinet maker. Miele has a unique panel integration system which allows the panels to align with the surrounding
cabinets.
Panel size is determined in the following manner:
Width:
35 3/4" in all cases
Thickness:
Minumum 3/4" outside frame
Panel Height = HOC - TKH
HOC = Total height of cabinet or side panel
TKH = Toe-kick height
HOC
Panel Height
Height: Determined using the following calculation:
Note:
Miele
Fully Integrated
Refrigerator
Finish back side of panels to insure appearance
Panel may extend above unit. This is not
considered in height calculation
Maximum panel weight:
81.6 Pounds
TKH
Panel Notes
If the adjoining cabinets are taller than the height of machine (HOM) - the front panel may be extended accordingly.
Simply maintain the toekick height and extend the panel the needed distance.
Adjoining cabinet
Extended Panel
Machine
K 1913 Vi / K 1903 Vi
Page 3 of 4
Fully Integrated 36” Refrigerator
K 1913 Vi / K 1903 Vi
HINGING DETAILS
90° Door
115° Door
Thickness options
Thickness options
0-1/8"
0-1/8"
0-3/4"
1"
1-1/4"
1-1/2"
1-3/4"
0-3/4"
1"
1-1/4"
1-1/2"
1-3/4"
2"
Cabinet Front
Cabinet Front
1"
Fro
nt P
ane
l
0-3/4"
1-1/2"
1-1/4"
1"
1-1/4"
Front Panel
0-3/4"
1-1/2"
Door Swing
Door Swing
16 7/8"
MAX
38 11/16"
7/16"
NOTE: Additional space needed depending on
thickness of front panels and handle used
NOTE: Additional space needed depending on
thickness of front panels and handle used
K 1913 Vi / K 1903 Vi
Page 4 of 4