Motorola DEBUT I856 User's Manual

User Guide
Motorola® DebutTM i856
www.nextel.com
© 2009 Sprint. Sprint and the NEXTEL name and logo are trademarks
of Sprint. Other marks are the property of their respective owners.
6/18/09
Motorola, Inc.
Consumer Advocacy Office
600 North US Hwy 45
Libertyville, IL 60048
www.hellomoto.com
Note: Do not ship your phone to the above address. If you
need to return your phone for repairs, replacement or warranty
service, please contact the Motorola Customer Support Center
at:
1-800-453-0920 (United States)
1-877-483-2840 (TTY/TDD United States for hearing impaired)
Product Support:
www.motorola.com/support
Certain mobile phone features are dependent on the
capabilities and settings of your service provider’s network.
Additionally, certain features may not be activated by your
service provider, and/or the provider's network settings may
limit the feature’s functionality. Always contact your service
provider about feature availability and functionality. All features,
functionality, and other product specifications, as well as the
information contained in this user's guide are based upon the
latest available information and are believed to be accurate at
the time of printing. Motorola reserves the right to change or
modify any information or specifications without notice or
obligation.
Important
Important Privacy Message: Sprint's policies
often do not apply to third-party
applications. Third-party applications may
access your personal information or
require Sprint to disclose your customer
information to the third-party application
provider. To find out how a third-party
application will collect, access, use, or
disclose your personal information, check
the application provider's policies, which
can usually be found on their website. If
you aren't comfortable with the third-party
application's policies, don't use the
application.
Manual number: NNTN7752A
DECLARATION OF CONFORMITY
Class B Digital Device
Per FCC CFR 47 Part 2 Section 2.1077(a)
As a personal computer peripheral, this device complies with part 15 of
the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. See 47 CFR Sec. 15.19(3).
Note
Responsible Party Name: Motorola, Inc.
Address: 8000 West Sunrise Boulevard
Plantation, FL 33322 USA
Phone Number: 1 (800) 453-0920
Hereby declares that the product:
Product Name: Motorola Debut i856
Model Number: H74XAN6JR7AN
FCC-ID: IHDT56KC1
Conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a)
FCC Notice to Users
The following statement applies to all products that have received FCC
approval. Applicable products bear the FCC logo, and/or an FCC ID in
the format FCC-ID: IHDT56KC1 on the product label.
Motorola has not approved any changes or modifications to this device by
the user. Any changes or modifications could void the user’s authority to
operate the equipment. See 47 CFR Sec. 15.21.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
䡲 Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
䡲 Consult the dealer or an experienced radio/TV
technician for help.
䡲
䡲
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
Use and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
1. Setting Up Service . . . . . . . . . . . . . . . . . . . 1
Setting Up Your Phone . . . . . . . . . . . . . . . . . . . . . .
Activating Your Phone . . . . . . . . . . . . . . . . . . . . . . .
Setting Up Voicemail . . . . . . . . . . . . . . . . . . . . . . . .
Enabling Security . . . . . . . . . . . . . . . . . . . . . . . . . . .
Account Passwords . . . . . . . . . . . . . . . . . . . . . . . . .
Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.
Group Connect . . . . . . . . . . . . . . . . . . . . . . . . . . .
Nextel Direct Send . . . . . . . . . . . . . . . . . . . . . . . . .
Talkgroups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Call Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Direct Talk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.
1
2
2
3
3
4
3.
Phone Basics . . . . . . . . . . . . . . . . . . . . . . . . 5
Making and Answering Calls . . . . . . . . . 20
Types of Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Phone Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Nextel Direct Connect . . . . . . . . . . . . . . . . . . . . . . 27
Service Features: The Basics . . . . . . . . . 47
Message Center . . . . . . . . . . . . . . . . . . . . . . . . . .
Receiving Messages . . . . . . . . . . . . . . . . . . . . . . .
Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Multimedia Messages (MMS) . . . . . . . . . . . . . . .
Text Messaging (SMS) . . . . . . . . . . . . . . . . . . . . .
Caller ID Blocking . . . . . . . . . . . . . . . . . . . . . . . . .
Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making a Second Call . . . . . . . . . . . . . . . . . . . . .
Making a Three-Way Call . . . . . . . . . . . . . . . . . . .
Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making International Calls . . . . . . . . . . . . . . . . . .
Special Dialing Codes . . . . . . . . . . . . . . . . . . . . .
Nextel Phone Services . . . . . . . . . . . . . . . . . . . . .
Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Getting Started With Your Phone . . . . . . . . . . . . . . 7
Navigating Through Menus and Options . . . . . . 13
Displaying Your Numbers . . . . . . . . . . . . . . . . . . . 15
Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5.
29
34
39
41
42
47
48
49
50
59
59
60
61
61
62
64
64
65
Data Services . . . . . . . . . . . . . . . . . . . . . . . 67
Wireless Data Services . . . . . . . . . . . . . . . . . . . . . 67
Downloading Content . . . . . . . . . . . . . . . . . . . . . . 69
6.
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .
Messaging Settings . . . . . . . . . . . . . . . . . . . . . . . .
Airplane Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting One Touch Direct Connect . . . . . . . . . . .
Headset Options . . . . . . . . . . . . . . . . . . . . . . . . . .
Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Phone Setup Options . . . . . . . . . . . . . . . . . . . . . .
Personalize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DC/GC Options Menu . . . . . . . . . . . . . . . . . . . . .
Security Settings . . . . . . . . . . . . . . . . . . . . . . . . . .
7.
Recent Calls . . . . . . . . . . . . . . . . . . . . . . . . 93
About Recent Calls . . . . . . . . . . . . . . . . . . . . . . . .
Viewing Recent Calls . . . . . . . . . . . . . . . . . . . . . .
Recent Calls Options . . . . . . . . . . . . . . . . . . . . . .
Saving Items From Recent Calls . . . . . . . . . . . . .
Deleting Items From Recent Calls . . . . . . . . . . .
Prepending a Number From Recent Calls . . . .
8.
70
74
76
78
79
79
79
83
85
90
90
93
95
95
96
96
97
Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
About Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Creating Contacts Entries . . . . . . . . . . . . . . . . . . . 99
Viewing Contacts . . . . . . . . . . . . . . . . . . . . . . . .
Adding a Number to an Entry . . . . . . . . . . . . .
Editing Entries . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deleting Entries . . . . . . . . . . . . . . . . . . . . . . . . . .
Assigning Speed Dial Numbers . . . . . . . . . . . .
Selecting a Ringer Type for an Entry . . . . . . . .
Assign a Picture to an Entry . . . . . . . . . . . . . . .
9.
101
102
102
103
103
104
105
Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Datebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
My Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Java Applications . . . . . . . . . . . . . . . . . . . . . . . . 112
Digital Rights Management (DRM) . . . . . . . . . 114
GPS Enabled . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Memo Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Voice Records . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Call Timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
10. microSD Card . . . . . . . . . . . . . . . . . . . . . 123
Using a microSD Card With Your Phone . . . .
microSD Settings . . . . . . . . . . . . . . . . . . . . . . . .
microSD Folders . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting Your Phone to Your Computer . .
123
126
127
127
11. Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Taking Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Camera Options . . . . . . . . . . . . . . . . . . . . . . . . . 130
Recording Videos . . . . . . . . . . . . . . . . . . . . . . . . . 131
Storing Pictures and Videos . . . . . . . . . . . . . . . 133
12. Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . 135
Turning Bluetooth On and Off . . . . . . . . . . . . .
Bluetooth Menu . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting Bluetooth Devices . . . . . . . . . . . .
Sending Items via Bluetooth . . . . . . . . . . . . . .
135
136
136
138
13. Multimedia . . . . . . . . . . . . . . . . . . . . . . . . 141
Media Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
My Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
My Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
My Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Safety and Warranty Information . . . . . . . . . . 155
S1. Important Safety Information . . . . . . . . 156
General Precautions . . . . . . . . . . . . . . . . . . . . . . 156
Maintaining Safe Use of and Access
to Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Battery Use and Safety . . . . . . . . . . . . . . . . . . . 160
Using Your Phone With a Hearing
Aid Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Caring for the Environment by Recycling . . . .
Export Law Assurances . . . . . . . . . . . . . . . . . . .
California Perchlorate Label . . . . . . . . . . . . . . . .
Radio Frequency (RF) Energy . . . . . . . . . . . . . .
Owner’s Record . . . . . . . . . . . . . . . . . . . . . . . . . .
Patent and Trademark Information . . . . . . . . . .
Software Copyright Notice . . . . . . . . . . . . . . . . .
Privacy and Data Security . . . . . . . . . . . . . . . . .
Smart Practices While Driving . . . . . . . . . . . . . .
164
164
165
165
168
169
169
170
170
S2. Manufacturer’s Warranty . . . . . . . . . . . . 172
Motorola Limited Warranty
for the United States and Canada . . . . . . . . . . 172
Service and Repairs . . . . . . . . . . . . . . . . . . . . . . 176
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
Introduction
User
Guide
Note
Because of updates in phone software, this
printed guide may not be the most current
version for your phone. Visit www.nextel.com
and sign in to access the most recent version
of the user guide.
WARNING
Please refer to the Important Safety
Information section on page 156 to learn
about information that will help you safely use
your phone. Failure to read and follow the
Important Safety Information in this phone
guide may result in serious bodily injury,
death, or property damage.
This User Guide introduces you to your wireless service
and all the features of your new phone.
Throughout this guide, you’ll find tips that highlight
special shortcuts and timely reminders to help you
make the most of your new phone and service. The
Table of Contents and Index will also help you quickly
locate specific information.
You’ll get the most out of your phone if you read each
section. However, if you’d like to get right to a specific
feature, simply locate that section in the Table of
Contents and go directly to that page. Follow the
instructions in that section, and you’ll be ready to use
your phone in no time.
i
Use and Care
To care for your Motorola phone, keep it away from:
ii
liquids of any kind
dust and dirt
Don’t expose your phone to water, rain,
extreme humidity, sweat, or other
moisture.
Don’t expose your phone to dust, dirt,
sand, food, or other inappropriate
materials.
extreme heat or cold
cleaning solutions
Avoid temperatures below -10°C/14°F or
above 45°C/113°F.
To clean your phone, use only a dry soft
cloth. Don’t use alcohol or other
cleaning solutions.
microwaves
the ground
Don’t try to dry your phone in a
microwave oven.
Don’t drop your phone.
1. Setting Up Service
⽧
Setting Up Your Phone (page 1)
⽧
Activating Your Phone (page 2)
⽧
Setting Up Voicemail (page 2)
⽧
Enabling Security (page 3)
⽧
Account Passwords (page 3)
⽧
Getting Help (page 4)
seconds to turn the phone on.
If your phone is activated, it will turn on, search for
service, and enter standby mode.
䡲 If your phone is not yet activated, see “Activating
Your Phone” on page 2 for more information.
䡲
Note
You may see a prompt to update your browser
information. Press the left softkey (the top left key
below the display screen) to select Ok and complete
the task.
4. Make your first call.
䡲
䡲
Use your keypad to enter a phone number.
Press the Talk key (,).
Setting Up Your Phone
Softkeys ( K )
1. Make sure your SIM card is in place.
䡲
See “Your SIM Card” on page 7.
2. Install the battery.
䡲
See “Installing the Battery” on page 10.
(;) Navigation Key
Rewind Key ())
(*) Forward Key
([) Music Key
Menu Key (/)
Talk Key (,)
(.) End/Power Key
(r/ y) OK/ Play Key
1. Setting Up Service
1
Setting Up Service
3. Press and hold the End/Power Key (.) for two
Note
Your phone’s battery should have enough charge for
your phone to turn on and find a signal, set up your
voicemail, and make a call. You should fully charge
your battery as soon as possible. See “Charging the
Battery” on page 11 for details.
Activating Your Phone
䢇
䢇
If you purchased your phone at a Nextel Store, it is
probably activated and ready to use.
If your phone is not activated, please call Nextel
Customer Service at 1-800-639-6111 from any other
phone.
Tip
䢇
2
You must be in an area covered by the Nextel
National Network when you first power up your
phone.
When you power up your phone the first time, it
performs a series of security checks. For example, it
verifies the phone is Nextel-approved and the correct
SIM card is installed. If you don’t pass the security
checks, your phone displays messages and screen
prompts showing what to do next. If you still
1. Setting Up Service
encounter security messages, call Nextel Customer
Service at 1-800-639-6111 from any other phone.
Setting Up Voicemail
All unanswered calls to your phone are automatically
transferred to your voicemail, even if your phone is in
use or turned off. Therefore, it is recommended that you
set up your voicemail and personal greeting as soon
as your phone is activated.
1. Using your Motorola DebutTM i856 phone, call your
wireless phone number.
2. Follow the system prompts to:
Create your passcode.
Record your name announcement.
䡲 Record your greeting.
䡲
䡲
Note
Voicemail Passcode: It is strongly recommended that
you create a passcode when setting up your
voicemail to protect against unauthorized access.
Without a passcode, anyone who has access to your
phone is able to access your voicemail messages.
information, you need to create passwords to protect
your privacy.
Enabling Security
Account Username and Password
You must enable security the first time you power on
your phone or within ten days of first activating your
phone.
1. Press and hold . for two seconds to power on
If you are the account owner, you will create an account
username and password when you sign on to
www.nextel.com. (Click Need to register for access? to get
started.) If you are not the account owner (if someone
else receives the bill for your service), you can get a
sub-account password at www.nextel.com.
your phone.
2. Press Ok (right softkey).
3. You are prompted to enable security. Press Yes
(right softkey). A series of screens followed by the
default homepage displays.
4. Press . to return to standby mode.
Account Passwords
Note
When you go to www.nextel.com, you will be
redirected to www.sprint.com by default. Follow the
sign in instructions above to access your Nextel
account.
Voicemail Password
You will create your voicemail password (or passcode)
when you set up your voicemail. See “Setting Up
Voicemail” on page 2 for more information on your
voicemail password.
With Nextel service, you enjoy unlimited access to your
personal account information and voicemail account.
To ensure that no one else has access to your
1. Setting Up Service
3
Setting Up Service
For more information about using your voicemail, (see
“Voicemail” on page 49.)
Getting Help
From Your Motorola Debut i856 Phone
䢇
Managing Your Account
䢇
Online: www.nextel.com
䢇
䢇
䢇
䢇
䢇
䢇
䢇
Access your account information.
Check your minutes used (depending on your
service plan).
View and pay your bill.
Enroll for online billing and automatic payment.
Purchase accessories.
Shop for the latest phones.
View available service plans and options.
Press *4, to check minute usage and account
balance.
Press *3, to make a payment.
From Any Other Phone
䢇
䢇
Nextel Customer Service: 1-800-639-6111.
Business Customer Service: 1-877-639-8351.
Operator Services
Operator Services provides assistance when you place
collect calls or when you place calls billed to a local
telephone calling card or third party.
䊳
Press 0,.
For more information or to see the latest in products
and services, visit us online at www.nextel.com.
4
1. Setting Up Service
Your Phone
⽧
Your Phone (page 5)
⽧
Getting Started With Your Phone (page 7)
⽧
Navigating Through Menus and Options (page 13)
⽧
Displaying Your Numbers (page 15)
⽧
Entering Text (page 15)
⽧
Accessories (page 19)
Slide Open View
Phone Basics
2. Phone Basics
12. Right Softkey
11. OK/Play Key
1. Left Softkey
2. Menu Key
3. Previous /
Rewind Key
4. Talk Key
10. Next/ Forward Key
9. Music Key
8. End/ Power Key
7. Navigation Key
6. Keypad
5. Back Key
2. Phone Basics
5
3. Previous/Rewind Key [)] lets you play the previous
Slide Closed View
song or rewind a song while using the phone’s
built-in music player.
13. Speaker
Button
4. Talk Key (,) allows you to place or receive calls,
answer Call Waiting, or use Three-Way Calling.
14. Volume
Button
5. Back Key (*) deletes characters in text entry
15. Direct
Connect
(DC) Button
mode. When using the Web, it allows you to return
to the previous page.
6. Keypad lets you enter numbers directly in standby
16. Micro USB
Connector
17. Audio Jack
mode and when adding numbers to contacts. It also
allows you to enter text for messaging, Web browsing,
Contacts, and Calender events.
7. Navigation Key scrolls through the phone’s menu
Key Functions
1. Left Softkey (-) lets you select softkey actions or
menu items corresponding to the bottom left line
on the display screen.
2. Menu Key (/) lets you access the phone’s menu
from standby mode and allows you to access
context-sensitive menus from other screens.
options and acts as a shortcut key from standby
mode.
8. End/Power Key (.) allows you to end calls, return to
standby mode, or turn the phone on or off.
9. Music Key ([) allows you to activate the phone’s
built-in music player.
10. Next/Forward Key [*] lets you play the next song or
fast forward a song while using the phone’s built-in
music player.
6
2. Phone Basics
11. OK/Play Key (r) selects the highlighted choice
12. Right Softkey (-) lets you select softkey actions
corresponding to the bottom right line on the
display screen.
13. Speaker Button ()) lets you place or receive calls in
speaker mode. In standby mode, pressing the
speaker button turns Direct Connect speaker
mode on and off.
14. Volume Button allows you to adjust the ringer
volume in standby mode, the voice or speaker
volume during a call, and the speaker volume
while using the music player or other applications.
15. Direct Connect (DC) Button allows you to use Nextel
Direct Connect®. (See page 27.)
16. Micro USB Connector allows you to connect your
charger or other accessories to your phone.
17. Audio Jack allows you to connect your headphones
to your phone.
Note
The use of wireless phones while driving may cause
distraction. Discontinue a call if you can’t concentrate
on driving. Additionally, the use of wireless devices
and their accessories may be prohibited or restricted
in certain areas. Always obey the laws and
regulations on the use of these products.
Getting Started With Your Phone
Phone Basics
when navigating through a menu and lets you play
or pause a song while using the phone’s built-in
music player.
To start using your Motorola Debut i856 phone:
䢇 Make sure your SIM card is in place.
䢇 Charge the battery.
䢇 Turn on your phone.
After you’ve completed these items, you are ready to
begin using your new phone.
Your SIM Card
Locating the SIM Card
Your SIM (Subscriber Identity Module) card is a small
card inserted into the SIM card holder within your
phone below the battery.
2. Phone Basics
7
If no SIM card came with your phone, contact Nextel
Customer Service at 1-800-639-6111.
Most users will never need to remove or insert the SIM
card. However, if it becomes necessary, follow the
instructions in “Removing and Inserting the SIM Card”
on page 8.
Important
The SIM card is designed for optimal
Contacts storage and feature use. For Nextel
SIM card compatibility information, visit
www.nextel.com/sim.
In some cases, Contacts and Groups may not
be accessible if you move your SIM card to
another phone. Contacts and Groups created
with your Motorola Debut i856 phone may not
be readable by an older iDEN SIM-based
phone.
8
2. Phone Basics
Removing and Inserting the SIM Card
Important
To avoid losing information stored in your SIM
card, do not remove it from your phone
unless absolutely necessary.
To remove your SIM card:
1. With your phone powered off, use your fingernail to
press down on the battery door latch and slide it
towards the top of the phone to remove it.
2. Remove the battery, and then use your thumbs to
carefully slide the SIM card out from under the
edge.
Protect your SIM card as you would any delicate
object. Store it carefully.
Battery and Charger
WARNING
Use only Nextel-approved or Motorolaapproved batteries and chargers with your
phone. The failure to use a Nextel-approved or
Motorola-approved battery and charger may
increase the risk that your phone will overheat,
catch fire, or explode, resulting in serious
bodily injury, death, or property damage.
Important
For information on battery safety, see “Battery
Use and Safety” on page 160.
To insert your SIM card:
1. With your phone powered off, use your fingernail to
press down on the battery door latch and slide it
towards the top of the phone to remove it.
2. Remove the battery, and then use your thumbs to
carefully slide the SIM card into your phone until it
lies flat in the SIM card holder.
Important
Do not touch the gold-colored areas of your
SIM card.
Nextel-approved and Motorola-approved batteries and
accessories can be found at Sprint Stores or through
Motorola. You may order online at www.nextel.com or by
calling 1-866-866-7509.
Your phone’s Lithium Ion (Li-Ion) battery allows you to
recharge it before it is fully drained.
When the battery reaches 5% of its capacity, your
phone makes a sound and displays a message. When
there are approximately two minutes of talk time left, the
phone sounds an audible alert and then turns off.
2. Phone Basics
9
Phone Basics
Note
Note
Tip
Long backlight settings, searching for service, vibrate
mode, browser use, and other variables may reduce
the battery’s talk and standby times.
Watch your phone’s battery level indicator and
charge the battery before it runs out of power.
2. Gently slide the battery cover forward to remove it
from the phone.
Tip
You may proceed to install a lanyard (sold separately)
with the battery cover removed.
3. Insert the battery into the opening, making sure the
Installing the Battery
1. With your phone powered off, use your fingernail to
connectors align. Gently press down to secure the
battery.
press on the battery door latch towards the front of
the phone.
4. Replace the battery cover and gently press and
slide it down until it clicks into place.
10
2. Phone Basics
Removing the Battery
1. Make sure the power is off so that you don’t lose
any stored numbers or messages.
2. Remove the battery cover and position your
fingernail on the top end of the battery to remove it.
Do not handle a damaged or leaking Li-Ion
battery as you can be burned.
Charging the Battery
Charge your battery as soon as possible so you can
begin using your phone.
With the approved Li-Ion battery, you can recharge the
battery before it becomes completely run down.
Always use a Nextel-approved or Motorola-approved
desktop charger, travel charger, or vehicle power
adapter to charge your battery.
Turning Your Phone On and Off
Using the Phone Charger
䊳
Plug the flat end of the charger into the phone’s
micro USB connector and the other end into an
electrical outlet.
Turning Your Phone On
䊳
Press and hold . for approximately two seconds.
As your phone connects to the network, you see a
connecting message. Your phone may require you to
enter identifying information to use it or to access
specific features.
2. Phone Basics
11
Phone Basics
WARNING
Turning Your Phone Off
䊳
Press and hold . for two seconds until you see
the powering down animation on the display
screen.
Your screen remains blank while your phone is off
(unless the battery is charging).
Viewing Status Information
Your phone’s display screen provides information
about your phone’s status and options. This list
identifies the symbols you’ll see on your phone’s
display screen:
d
f
y
w
e Battery Strength — A fuller battery indicates a
g greater charge. The “plug” icon (bottom
rows) indicates the phone is charging.
x
h
z{
|}
Signal Strength — More bars next to the
~
No Service — Your phone is without service.
You cannot make or receive any type of call.
12
antenna indicate a stronger signal.
2. Phone Basics
$
Phone In Use — Your phone is active on a
phone call.
0
Direct Connect In Use — Your phone is active
on a Direct Connect call.
t
Group In Use — Your phone is active on a
4
Direct Talk — Your phone is off network and
r
Talkgroup In Use — Your phone is active on a
Group Connect call.
set to Direct Talk mode.
Talkgroup call.
c
Bluetooth In Use — Your phone is using
Bluetooth. If this icon is blinking, your phone
is in discoverable mode. If this icon is static,
a Bluetooth connection is active.
%'
Active Phone Line — 1 indicates phone line 1
is ready to make calls; 2 indicates phone
line 2 is ready to make calls.
&); Call Forward — Your phone is set to forward
(*< calls. See “Call Forwarding” on page 62.
,
"
Ringer Off — Your phone is set to not ring.
See “Vibrate All” on page 72.
Speaker Off — Direct Connect sound is set to
come through the earpiece rather than
through the speaker.
26
13
5
Messages — You have one or more
messages. See “Message Center” on
page 47.
QRS
Text Input — You are using one of the phone’s
AB
make calls using a TTY (text telephone)
device. See “Telecommunications Relay
Service” on page 64.
W
Hearing Aid — Your phone is set for use with a
hearing aid and is active on a phone call.
See “Using Your Phone With a Hearing Aid
Device” on page 163.
:
Voice Record — You have one or more voice
records stored. See “Voice Records” on
page 120.
text entry methods. See “Selecting a Text
TUV Input Mode” on page 15.
WX
7>
?
Internet — You are ready to browse the
L
Transmitters — Your phone is set not to
receive calls and other transmissions. See
“Airplane Mode” on page 78.
Internet or are browsing the Internet using a
secure connection. See “5. Data Services”
on page 67.
TTY — You are ready to use your phone to
Phone Basics
/5
Navigating Through Menus and
Options
䊳
Press / to access the main menu, and then use
the navigation key to scroll through menu items.
To navigate through a list-type menu, simply press your
navigation key up or down. The scroll bar at the right of
the menu keeps track of your position in the menu at
all times.
2. Phone Basics
13
Many features provide context-sensitive menus that let
you access related features and actions. This icon f
appears any time a context-sensitive menu is available.
Press / to access the menu.
Backing Up Within a Menu
Selecting Menu Items
To return to standby mode:
As you navigate through the menu, menu options are
highlighted. Select an item by highlighting it and
pressing r.
For example, to view your text messages:
1. Press / to access the main menu.
2. Select Messages by highlighting Messages and
pressing r.
3. Select Inbox by highlighting it and pressing r.
(If you have any MMS messages, they are
displayed.)
Note
14
For the purposes of this guide, the above steps
condense into “Press / > Messages > Inbox.”
2. Phone Basics
To go to the previous menu:
䊳
䊳
Press Back (right softkey).
Press ..
Shortcuts and Personalized Keys
In standby mode, your phone gives you ways to quickly
access features you use frequently:
䢇 Use the Shortcuts feature (page 83) to quickly access
most menu options by pressing a number on your
keypad or saying the voice name of the shortcut.
䢇 Use the Personalize feature (page 85) to assign main
menu items to the navigation keys, softkeys and r,
reorder the main menu, and set a main menu item to
appear when you turn on your phone.
Your phone contains an in-device help program to
help you understand complicated or seldom used
features. When you access a feature, Help sometimes
appears as a menu item or softkey. Select Help and
read the text for a quick overview of the feature. For
more information, refer to this guide.
Displaying Your Numbers
My Info lets you view your phone number, Direct
Connect number, and other phone information.
䊳
Press / > Tools > My Info.
Entering Text
Selecting a Text Input Mode
Your phone provides convenient ways to enter letters,
numbers, and symbols whenever you are prompted to
enter text (for example, when adding a Contacts entry
or when composing text and multimedia messages).
To choose a text input mode:
1. At a screen requiring you to enter text, press / to
change the text input mode.
2. Select one of the following options:
䡲
Alpha to enter text directly using the keypad.
䡲
Word to enter text using a predictive text system
that reduces the number of key presses required
while entering a word. (See page 16.)
䡲 Symbols to enter punctuation and other symbols.
(See page 17.)
䡲 Numeric to enter numbers by pressing the
numbers on the keypad. (See page 17.)
䡲 Text Input Settings allows you to change the settings
for text input mode. (See page 16.)
䡲 Insert to insert Quick Notes preset messages
(Insert QNotes) or additional multimedia elements
such as pictures or audio files into a message.
(See page 54.) (You can also access Quick Notes
by pressing QNotes [left softkey] when beginning
a message.)
Tip
When entering text, press and hold the # to
change letter capitalization (ABC > Abc > abc).
2. Phone Basics
15
Phone Basics
Help
Entering Text Using Word Text Input
Word Text Input (T9) reduces the number of keystrokes
needed to enter a word by predicting complete words
as you type. While you enter letters, Word mode
matches your keystrokes to words in its database and
displays the most commonly used matching word. You
can add your own words to this database.
Note
To use Word text input, you must turn the Complete
Word setting on. From a text entry screen, press / >
Text Input Settings > Complete Word and select On.
Press Back (right softkey) to return to the text entry
screen.
4. If the word that appears is not the desired word,
press the navigation key up or down to change the
word on the display to the next most likely word in
the database. Repeat until the desired word
appears.
Adding a Word to the Database
If a specific word is not displayed as an option when
you are using Word, add it to the database.
1. Select the Alpha text input mode. (See “Selecting a
Text Input Mode” on page 15.)
2. Enter the word. (See “Entering Text Using Alpha
Mode” on page 17.)
1. Select the Word text input mode.
2. Press the corresponding keys once per letter to
enter a word. (For example, to enter the word “Bill,”
press 2455.) (If you make a mistake, press
Delete [left softkey] to erase a single character.
Press and hold Delete [left softkey] to erase an
entire entry.)
3. To accept a word and insert a space, press I .
16
2. Phone Basics
3. Select the Word text input mode.
The word will appear as an option the next time you
scroll through options during Word Text Input.
Tip
You cannot store alphanumeric combinations such
as Y2K.
1. On a text entry screen, press /.
Characters scroll in the following order:
Key
2. Select Text Input Settings.
ABC
3. Select your Primary Input and Secondary Input
DEF
language, and whether you want Complete Word
and Word Predict features to be on or off.
GHI
JKL
Entering Text Using Alpha Mode
1. Select the Alpha mode. (See “Selecting a Text Input
MNO
PQRS
Mode” on page 15.)
2. Press the corresponding keys once per letter to
enter a word. (For example, to enter the word “Bill,”
press 2 twice, 4 three times, 5 three times,
and 5 three times again. (If you make a mistake,
press Delete (left softkey) to erase a single
character. Press and hold Delete (left softkey) to
erase an entire entry.)
By default, the first letter of an entry is capitalized and
the following letters are lower cased. After a character
is entered, the cursor automatically advances to the
next space after two seconds or when you enter a
character on a different key.
TUV
WXYZ
English Sequence
Space . ? ! , @ & : ; “ - ( ) ‘ ¿ ¡ % £ $ ¥
ABC2ÁÃÂÀÇ
DEF3ÉÊÈ
GHI4ÍÌ
JKL5
MNñO6ÓÕÔÒ
PQ R S 7ß
TUV8 Ú Ü Û Ù
WXYZ 9
+-0*/\[]=><#§
Space Shift Caps Lock
Phone Basics
To change the text input settings:
Back
Entering Symbols, Numbers, and Quick
Notes
To enter symbols:
䊳
Select the Symbols mode. (See “Selecting a Text
Input Mode” on page 15.) To enter a symbol, press
the appropriate key indicated on the display.
2. Phone Basics
17
To enter numbers:
䊳
Select the Numeric mode and press the appropriate
key. (See “Selecting a Text Input Mode” on
page 15.)
To enter Quick Notes:
1. From a text entry screen, press QNotes (left softkey).
Capitalization
When you press and hold the # key, it acts as a
three-way toggle. Press and hold # to make the next
letter typed uppercase (shift), to make all subsequent
letters typed uppercase (caps lock), or to go back to
lowercase letters.
These icons appear:
2. Select a message and press r.
Tip
To add a quick note after you have already started
entering a message, press / > Insert >
Insert QNotes, and select a message.
Note
Quick Notes preset messages make composing text
messages easier by allowing you to enter quick
messages, such as “Meet me at,” “Let’s get lunch,” or
a customized message of your own.
Special Function Keys
Some of the phone’s keys assume different functions
while in Alpha or Word mode.
Spaces
Press # for a space.
18
2. Phone Basics
R or U
S or V
Shift is on.
Caps lock is on.
When none of these icons appear, letters typed are
lowercase. Scrolling up or down after typing a letter in
Alpha mode changes the case of the letter (uppercase
or lowercase).
Note
When creating a text message, you may not be able
to make a letter uppercase by scrolling up,
depending on the type of text message and the text
entry mode.
Your phone automatically makes the first letter of a
sentence uppercase.
Using a Remote Direct Connect Button
Press 1 or 0 to insert punctuation. Continue to
press the key to view the list of symbols available
through that key. Pause to select a symbol.
If you are using a headset or other optional accessory
with a remote Direct Connect button, you can use the
remote Direct Connect button for phone calls, Direct
Connect calls, and Group Connect calls.
Note
Additional punctuation symbols are available in
Symbols mode.
Accessories
Your phone comes with the following accessories:
䢇 A Li-Ion battery and charger.
䢇 A128K SIM card.
Various accessories are available for use with your
Motorola Debut i856 phone, including cases, vehicle
power chargers, data cables, hands-free accessories,
and more.
To order additional accessories, go to www.nextel.com
or call1-866-866-7509. You can also contact your
Nextel Authorized Representative or stop by any Sprint
Store. For information on Sprint Store locations, go to
www.sprintstorelocator.com.
For phone calls, use the remote Direct Connect button
to answer calls, switch between calls, and end calls.
Hold the remote Direct Connect button for less than
two seconds to answer calls and switch between calls.
Hold the remote Direct Connect button for more than
two seconds to end calls.
For Direct Connect calls and Group Connect calls, use
the remote Direct Connect button as you would the
Direct Connect button on your phone.
When using a headset, the Direct Connect button on
your phone works the same way as when you are not
using a headset. Direct Connect and Group Connect
sounds will be heard through the headset.
2. Phone Basics
19
Phone Basics
Punctuation
䢇
3. Making and Answering
Calls
⽧
Types of Calls (page 20)
⽧
Phone Calls (page 21)
⽧
Nextel Direct Connect (page 27)
⽧
Group Connect (page 29)
⽧
Nextel Direct Send (page 34)
⽧
Talkgroups (page 39)
⽧
Call Alerts (page 41)
⽧
Direct Talk (page 42)
䢇
䢇
䢇
䢇
Note
Types of Calls
With the Nextel National Network, Nextel Direct
Connect, and your Motorola Debut i856 phone, you
have the following traditional wireless phone and
Nextel Direct Connect services available to you:
20
Digital Wireless Phone Calls offer clear calls and other
services, such as missed call notification, Three-Way
Calling, speakerphone, and speed dialing (page 21).
Direct Connect Calls allow two-way radio
communication with another Direct Connect user
within the Nextel National Network (page 27).
Group Connect Calls allow coast-to-coast two-way
radio calling to up to 20 Nextel Direct Connect
customers simultaneously (page 29).
Nextel Direct Send allows you to send contact information
in Direct Connect and Group Connect calls and send
pictures in Direct Connect calls (page 34).
Talkgroup Calls allow two-way radio calling to up to
100 Nextel Talkgroup customers simultaneously
(page 39).
3. Making and Answering Calls
䢇
To learn more about the differences between Nextel
Group Connect calls and Talkgroup calls, please see
“Difference Between Group Connect and Talkgroup
Calls” on page 39.
Nextel Direct Talk allows for two-way radio
communication “off the network” between two or
more phones equipped with this capability
(page 42).
Phone Calls
Answering Calls
1. Make sure your phone is on.
Placing a traditional wireless phone call from your
Motorola Debut i856 is as easy as making a call from
any landline phone.
1. Make sure your phone is on.
2. Enter a phone number from standby mode and
press ,. (If you make a mistake while dialing,
press Delete [right softkey] to erase the numbers.)
3. Press . when you are finished.
Tip
To redial your last outgoing call, press and hold ,.
You can also place calls from your phone by using
Voice Names (page 26), speed dialing numbers from
your Contacts (page 27), and using your Recent Call
list (page 26).
Note
When your phone is off, calls go directly to voicemail.
2. Press , to answer an incoming call.
Depending on your settings, you may also answer
incoming calls by sliding the phone open or pressing
any number key. “Call Answer Mode” on page 85 more
information.
Tip
When the slide is closed, you can answer a call either
by pressing the Speaker button on the upper left
side of the phone ()) or pressing Yes (left softkey).
To set the phone to answer and end calls by sliding it
open and close, press / > Settings > Phone Calls
> Slide Activation and set Slide to Ans and Slide to
End to On.
Making Calls
Making Calls
Your phone notifies you of incoming calls by any
combination of ringing or vibrating, the indicator light
flashing, the backlight illuminating, or the screen
displaying an incoming call message.
3. Making and Answering Calls
21
If the incoming call is from a number stored in your
Contacts, the entry’s name is displayed. The caller’s
phone number may also be displayed, if available.
Ending a Call
䊳
To end a call, press ..
Missed Phone Calls
Missed phone calls are forwarded to voicemail. When
you do not answer an incoming call, you will see a
Missed Call notification.
To display a Missed Call entry from the notification screen:
䊳
Press View (left softkey). (To dial the phone number,
press , after displaying the entry.)
To display a Missed Call entry from standby mode:
1. Press , or / > Recent Calls.
2. Highlight an entry and press r.
22
3. Making and Answering Calls
Emergency Calls
Your phone supports emergency calling. Emergency
phone calls can be made even when your SIM card is
blocked or not in your phone.
䊳
Dial 911 and press , to be connected to an
emergency response center. If you are on an active
call, you must end it before calling 911.
When you make an emergency call, your phone’s GPS
Enabled feature can help emergency service
personnel find you, if you are in a location where your
phone's GPS antenna has established a clear view of
the open sky and your local emergency response
center has the equipment to process location
information. See “GPS Enabled” on page 115, and
particularly “IMPORTANT: Things to Keep in Mind” on
page 116 and “Making an Emergency Call” on
page 116, for more information on the limitations of this
feature. Because of the limitations of this feature, always
provide your best knowledge of your location to the
emergency response center when you make an
emergency call.
Always report your location to the 911 operator
when placing an emergency call. Some
designated emergency call takers, known as
Public Safety Answering Points (PSAPs) may not
be equipped to receive GPS location information
from your phone.
Emergency calls cannot be placed while the
keypad is locked.
If you have not registered on the network,
emergency calls cannot be placed while your
SIM card is in your phone.
If you are bringing your phone number to Nextel
from your previous carrier, you may receive a
temporary telephone number while your Nextel
phone is being programmed with your
permanent phone number. If you make a call to
911 and the call fails, the 911 emergency
response center will not be able to call you back
on your Nextel phone if in the meantime, your
Nextel phone has been programmed with your
permanent telephone number. If the call is
disconnected before location and details have
been provided, call 911 again and advise that you
were disconnected.
In-Call Options
Press / during a call to display a list of available
in-call features. To select an option, highlight it and
press r. The following options may be available:
䢇 Hold to place the call on hold.
䢇 3 Way to initiate a three-way call.
䢇 Use Bluetooth to switch from the phone’s microphone
to a Bluetooth device.
䢇 2nd Call to place a second call.
䢇 Contacts to display your Contacts list.
䢇 Recent Calls to display Recent Calls list.
䢇 My Info to display your phone’s Information.
䢇 Memo to display the phone’s electronic notepad.
䢇 Datebook to enter a datebook event.
䢇 Messages to create a message.
䢇 Store to store a new contact.
䢇 Record to record the phone call.
䢇 GPS to enter the GPS application.
䢇 In Call Setup to modify the in-call features.
3. Making and Answering Calls
23
Making Calls
Important
Speakerphone
䊳
Press ) or Speaker (right softkey) during a call to
route the phone’s audio through the speaker or the
earpiece.
WARNING
Because of higher volume levels, do not
place the phone near your ear during
speakerphone use.
To view Call Details and Call Info:
1. Select a recent call.
2. Press r to view the Call Details.
3. Press r again to view the Call Info.
Saving a Phone Number
1. Enter a phone number and press /.
Mute
䊳
2. Highlight Store Number and press r.
Press Mute (left softkey) during a call to mute the
microphone. Press Unmute (left softkey) to unmute
the microphone.
End-of-Call Options
After you receive or make a call, the call duration is
briefly displayed. You are then automatically taken to
the Recent Calls list.
To save a number that is not in your contacts:
䊳
24
Highlight an entry and press Save (left softkey).
(See “Saving a Phone Number” on page 24.)
3. Making and Answering Calls
3. To store a new entry, highlight [New Contact] and
press r to add a new entry.
– or –
Search for an existing contact name and press r
to save the new number.
4. Enter or edit information as necessary and press
Save (left softkey) to save the Contact.
For more information about Contacts, see
“8. Contacts” on page 98.
To find Contacts entries, you can either scroll through
the list using your navigation key or you can search
Contacts entries by name.
1. Press / > Contacts.
2. Press Search (left softkey).
3. Enter the first few letters of a Contact's name and
press r. (The first contact entry that matches the
entered text will be highlighted.)
4. To display the Contacts entry, press r. To dial the
entry's default phone number, press ,.
Phone Numbers With Pauses
You can dial or save phone numbers with pauses for
use with automated systems, such as voicemail,
conference call, or credit card billing numbers.
There are two types of pauses available on your phone:
䢇 Wait sends the next set of numbers when prompted.
䢇 Pause automatically sends the next set of numbers
after three seconds.
Note
You can have multiple pauses in a phone number
and combine waits and pauses.
To dial or save phone numbers with pauses:
1. Enter the phone number.
2. Press and hold * until the letter P appears. The P
represents a three-second pause. For a longer
pause, press the letter P more than once. Each P
represents a three-second pause.
– or –
Press and hold * until the letter W appears. The
W means your phone waits before dialing further. A
message appears asking about sending the rest of
the digits.
3. Enter additional numbers.
4. Press , to dial the number.
Making Calls
Finding a Number
– or –
Press / > Store Number to save the number in
your Contacts.
3. Making and Answering Calls
25
Note
When dialing a number with a wait, press Yes (left
softkey) to send the next set of numbers.
Making a Call From Contacts
you to say the voice name.
2. Say a voice name. Your phone plays the name
back to you.
1. Press / > Contacts.
3. The call is placed automatically.
2. Highlight an entry and press , to dial the default
Tip
phone number.
– or –
To dial another number from the entry, highlight
the name, press the navigation key right or left until
the correct number type appears, and then
press ,.
Making a Call From Recent Calls
1. Press , or / > Recent Calls.
2. Highlight an entry and press ,.
Making a Phone Call Using a Voice Name
If you have created a voice name in Contacts (see
page 100), say the voice name into your phone to
enter the number.
26
1. Press and hold s until a prompt appears telling
3. Making and Answering Calls
To stop a phone call from being completed,
press ..
Making a Phone Call While in a Direct
Connect Call
Pressing , while in an active Direct Connect lets you
initiate a phone call to the other person if their phone
number is stored in Contacts.
1. While in a Direct Connect conversation press ,.
(You will see a Start Call To: prompt.)
2. Press Yes (left softkey) or press r to switch from
the Direct Connect call to a phone call.
Each phone number stored in Contacts is assigned a
Speed Dial number, which you can use to call that
number. You can store up to 600 numbers in your
phone’s speed dial memory.
1. Enter a speed dial number and then press #.
2. Press , to dial the number.
To use Turbo Dial® for speed dial locations 1–9:
䊳
Press and hold the appropriate key for
approximately two seconds. The display confirms
that the number has been dialed when it shows
“Calling...”.
Redialing the Last Number
䊳
Press and hold ,.
Nextel Direct Connect
Nextel offers the following Nextel Direct Connect®
services:
®
䢇 Direct Connect allows instant two-way radio
communication with another Direct Connect user
anywhere on the Nextel National Network (U.S.).
䢇 International Direct Connect allows Direct Connect
calling to and from select countries.
®
䢇 Group Connect allows nationwide Direct Connect
calling to up to 20 other Direct Connect users at
once. (See “Group Connect” on page 29.)
SM
䢇 Talkgroup allows Direct Connect calling to up to 100
Nextel subscribers in the same Direct Connect
network. (See “Talkgroups” on page 39.)
SM
䢇 Nextel Direct Talk lets you establish off-network,
two-way radio communication between two or more
Nextel Direct Talk-capable phones. (See “Direct Talk”
on page 42.)
See www.nextel.com for more details on these Direct
Connect services. Pricing for each of these services is
based on your service contract.
3. Making and Answering Calls
27
Making Calls
Speed Dialing
Making Direct Connect Calls
Note
1. Enter a Direct Connect number. (See “Dialing
Direct Connect Numbers” on page 28.)
2. Press and hold the Direct Connect (DC) button on
the left side of your phone. Begin talking after your
phone emits a chirping sound.
If you are calling or saving a Direct Connect number
for a Sprint phone with Direct Connect capabilities,
the Direct Connect number may be the same as the
wireless phone number. When dialing or saving the
Direct Connect number, insert asterisks in place of
hyphens (913*555*1234).
3. Release the DC button to listen.
A Direct Connect call ends automatically after there is
no activity on the call for several seconds.
Dialing Direct Connect Numbers
Every Direct Connect number has three parts:
䢇 An area ID.
䢇 A network ID.
䢇 A member ID.
An asterisk separates each part (for example:
999*999*9999). When you enter a number containing
all three parts, you must separate them with asterisks.
The number of digits in each part of a Direct
Connect number may vary. For example, your Direct
Connect number may be formatted as
999*999*9999, while another valid number may
appear as 555*555555*55.
Tip
When you store a Direct Connect number in
Contacts, be sure to include the entire number,
including the asterisks.
Using Just the Member ID
If you are contacting someone sharing your network
and area IDs, you only need to enter the member ID
(the last part of the number).
1. Enter a member ID.
2. Press and hold the DC button.
28
3. Making and Answering Calls
If you have numbers stored in Contacts (page 98) or
Recent Calls (page 93), you can use these numbers to
make calls.
1. Press / > Contacts or Recent Calls.
2. Highlight an entry and then press and hold the DC
button to call the entry’s Direct Connect number.
Tip
You can make Direct Connect calls while viewing
entry details on either list. Display the entry details or
My Info from another phone (in Recent Calls) and
press and hold the DC button.
Making Direct Connect Calls Using a Voice Name
If you have created a voice name in Contacts, say the
voice name into your phone to enter the number.
1. Press and hold the Speaker button (s) until a
prompt appears telling you to say the name.
2. Say the name. Your phone plays the name back to
you.
3. Press and hold the DC button.
Answering Direct Connect Calls
When you receive a Direct Connect call, your phone
emits a tone or vibrates. You then hear the voice of
your caller.
1. Wait for the caller to finish speaking.
2. Press and hold the DC button. Continue as you
would on any Direct Connect call.
3. Press . to end the call.
A Direct Connect call ends automatically after there is
no activity on the call for several seconds.
Group Connect
A Group Connect call is similar to a Direct Connect call
to one user, but is made to multiple Direct Connect
subscribers at once. You can create Groups from your
phone and call up to 20 other Group Connectcompatible phones* anywhere on the Nextel National
Network. You can create a Group for one-time use or
store it to Contacts so you can call it at any time.
* Not all phones are Group Connect-compatible. See
www.nextel.com for more details on Group Connect.
3. Making and Answering Calls
29
Making Calls
Making Direct Connect Calls From Contacts or
Recent Calls
Note
In order to store Groups to your Motorola Debut i856
phone, you must use the 128K SIM card that came
with your phone. The 128K SIM card is labeled
“Nextel 1200 Contcs & 25 Grps”. With this SIM card, a
maximum of 25 groups can be added to your
Motorola Debut i856 phone. Group entries created
with your Motorola Debut i856 phone may not be
readable by older iDEN SIM-based phones.
Making Group Connect Calls
1. From Contacts or the Recent Calls list, highlight or
select a Group.
2. Press the DC button.
Tip
You can also start a Group Connect call by entering
or selecting a Direct Connect number. See “Starting
a Group Connect Call With a Direct Connect
Number” on page 31.
Answering Group Connect Calls
䊳
30
Proceed as if answering a Direct Connect call from
one user. Only one person at a time may speak on
a Group Connect call.
3. Making and Answering Calls
Creating Groups in Contacts
1. Press / > Contacts.
2. Select [New Group].
3. To assign a name to the Group, enter the name.
Note
If you do not assign a name, the Group is named
“Group” followed by the number of members in the
Group. For example, “Group (8)” is a group with eight
members.
4. Add Group members. See “Adding Group
Members” on page 30.
5. To create a voice name for the Group (optional),
select [Options] > Voice Name. Follow the prompt to
record a Group name. When you have finished,
press Back (right softkey).
6. Press Save (left softkey).
Adding Group Members
You can add Group members that have a Direct
Connect number and Group Connect-compatible
phone to your Group by selecting them from Contacts,
the Recent Calls list, Memo, or by manually entering
To add Group members from Contacts, the Recent Calls
list, or Memo:
Starting a Group Connect Call With a
Direct Connect Number
1. Press / > Push To Talk > Walkie Talkie, select entries
1. While creating a Group, select [Add Member].
for a Group Connect call, and go to step four. (To
add members or numbers from Recent Calls or
Memo, scroll left or right.)
Note
– or –
To move between Contacts, the Recent Calls list, and
Memo, scroll left or right.
2. Highlight desired entries and press r. A
checkmark appears next to each selected
member.
Note
To deselect a member, highlight it and press r.
3. Press Done (left softkey) and then press Save (left
softkey) to save the group.
To add Group members manually from the keypad:
1. While creating a Group, select [Add Number].
2. Enter the Direct Connect number.
3. Press r and then press Save (left softkey).
From standby mode, enter a Direct Connect
number.
– or –
From Contacts or Recent Calls, highlight an entry
containing a Direct Connect number.
2. Press / > New Group or Call New Group.
3. Add more Group members. See “Adding Group
Members” on page 30.
Making Calls
the Direct Connect number from your keypad. You can
also add all members in an existing Group to another
Group by selecting the Group name from Contacts.
4. To save the Group, press / > Store Group.
– or –
To call without saving, press Done (left softkey).
5. To make the call, press the DC button.
3. Making and Answering Calls
31
Removing Members or Groups
To remove a member from a Group:
1. From Contacts, highlight a Group and press Edit
(left softkey).
2. Highlight a member and press / >
Remove Member.
3. Press Save (left softkey).
Note
You can also select Remove All Members however,
you will have to add at least two new members to
save the edited Group.
To delete a Group from Contacts:
1. From Contacts, highlight a Group.
2. Press / > Delete Group.
3. Press Yes (left softkey).
2. Add more information to the entry (optional).
3. Press Save (left softkey).
To store a group to Contacts from an active call:
1. During an active Group Connect call, press / >
Store Group.
2. Add more information to the entry (optional).
Note
You cannot record a voice name during an active
call.
3. Press Save (left softkey).
Storing Members of Groups
To store a member from the Recent Calls list or within
Contacts:
1. Display a Group and press / > Store Number.
2. Select a number or member to store.
Storing Groups
3. Add more information to the entry (optional).
To store a group to Contacts from the Recent Calls list:
4. Press Save (left softkey).
1. From the Recent Calls list, select a Group and
press Save (left softkey).
32
3. Making and Answering Calls
To store a member from an active call:
1. During an active Group Connect call, press / >
Group Connect Call Details
2. Select a number or member to store.
During a Group Connect call, you can view details
about the other group members, such as their name or
Direct Connect number, and their status on the call.
3. Add more information to the entry (optional).
To view Group Connect call details:
Note
You cannot record a voice name during an active
call.
4. Press Save (left softkey).
Group Connect Call Information
While you are in a Group Connect call, the following
appears on the screen:
䢇 The name of the Group.
䢇 The name or the Direct Connect number of the
person speaking.
䢇 The number of members who are participating in the
Group Connect call.
䊳
Press Details (left softkey).
In the Details view, these icons appear next to member
names or Direct Connect numbers:
F
The member of the Group who is
speaking.
E
A member of the Group who is active on
the Group Connect call, but not speaking.
D
A member of the Group who has exited
the call.
H
A member of the Group who could not be
reached on the Group Connect call.
G
A member of the Group whose status is
unknown.
3. Making and Answering Calls
Making Calls
Store Number.
33
Nextel Direct Send
To send a picture during a call:
1. While in a Direct Connect call, press Picture (right
Nextel Direct Send lets you use Direct Connect calls to
exchange pictures, My Info, contact information, and
Groups with other phones that have this capability.
Nextel Direct Send cannot be used during Talkgroup
calls. Pictures cannot be sent in Group Connect calls.
Sending a Picture
softkey). A list of pictures that can be included in a
Direct Connect call appears.
2. Select a picture and press the DC button to send it.
3. Wait while the picture is transmitted. The Direct
Connect call is temporarily interrupted while a
picture is transmitted.
4. When prompted, press the DC button to resume
When you send a picture using Nextel Direct Send, the
picture appears on the display of the receiving phone,
and is saved by that phone.
Sending a Picture During a Call
You can send a picture at any time during a Direct
Connect call, whether you made or received the call.
(Additional charges may apply.)
You cannot talk or listen on a Direct Connect call while
a picture is being transmitted. Other activities, such as
searching for a picture, do not prevent you from talking
or listening.
34
3. Making and Answering Calls
the Direct Connect call.
Note
The first time you send a stored picture after turning
the phone on, the message Picture Fees May Apply
appears and you are prompted to respond. Press
Yes (left softkey) to send the picture. Press No (right
softkey) to cancel.
Starting a Call by Sending a Picture
You can start a call by choosing a stored picture from
the Media Center.
To do this, you must have the recipient’s Direct Connect
number and IP address stored in your Contacts.
When a person sends you My Info from his or her
phone, including his or her Direct Connect number
and IP address, you can then easily store this
information to Contacts from the Recent Calls list.
To start a call by sending a picture:
1. Press / > Multimedia > Media Center and then
highlight or select a picture.
2. Press / > Send Via... > Direct Send.
3. Select A Contact or A Recent Call. These names have
Direct Connect numbers and IP addresses stored.
4. Select a name and press the DC button to send
the picture.
5. When prompted, press the DC button to resume
the Direct Connect call.
Receiving a Picture
When someone sends you a picture using Nextel
Direct Send, your phone emits a tone or vibrates and a
message appears on the display asking you to accept
the picture.
Pictures you receive are saved to your phone’s memory
and are accessible through the Media Center.
When you receive a picture, it appears every time you
are in a Direct Connect call with the person who sent it
unless you delete the picture from the Media Center.
This occurs for the last 20 people who sent you
pictures.
To accept a picture:
1. When you see the message asking you to accept
the picture, press Yes (left softkey). (To decline the
picture press No [right softkey].)
2. Wait while the picture is transmitted. The Direct
Connect call is temporarily interrupted while a
picture is transmitted.
3. When prompted, press the DC button to resume
the Direct Connect call.
Note
Making Calls
Tip
The first time you accept a stored picture after
turning the phone on, the message Picture Fees
May Apply appears and you are prompted to
respond. Press Yes (left softkey) to accept the
picture. Press No (right softkey) to cancel.
3. Making and Answering Calls
35
Tip
To stop the transmission before it is finished, press
Cancel (right softkey).
Setting Picture Capability
To turn your phone’s ability to send and receive pictures in
Direct Connect calls on or off:
1. Press / > Push To Talk > PTT Options > On/Off Settings.
2. Select Pictures and press r to check or uncheck
the box.
3. Press Done (left softkey) to save the setting.
This setting does not affect your phone’s ability to send
and receive My Info or contact information.
Sending My Info
You can control what portion of the information in My
Info is sent and whether it is sent automatically in every
Direct Connect call or only when you choose to send it.
Tip
When you send My Info, certain information, such as
your email address or fax number, cannot be
included. To send complete contact information,
create an entry for yourself in Contacts and send it.
The information your phone sends always includes My
Name and Direct Connect.
It may include Line 1, Line 2, Carrier IP, Direct Connect, and
Group ID depending on the options provided by your
service provider and how you set your sending options.
Sending My Info and Contact Information
The default setting is Line 1 only.
When you send My Info or contact information using
Nextel Direct Send, the information you send appears
on the display of the receiving phone. After the call, the
information appears on that phone’s Recent Calls list.
To change which fields are sent:
1. Press / > Tools > My Info.
2. Press / > Direct Send Setup > Info To Send.
3. A checkmark appears next to the fields that will be
sent. To add or remove the checkmark, select the
field.
36
3. Making and Answering Calls
To control whether your information is sent automatically:
1. Press / > Tools > My Info.
2. Press / > Direct Send Setup > Auto Send.
3. Select On to send your information automatically,
or Off to send your information only when you
choose to send it.
Note
When you receive your phone, it is set to send your
information automatically.
To send My Info during a call:
1. While in a Direct Connect call, press / >
Direct Send My Info.
2. When Ready To Send appears, press the DC button
to send the information.
To start a call by sending My Info:
1. Press / > Tools > My Info.
2. Press / > Direct Send My Info.
3. Enter a Direct Connect number or press Browse
(left softkey) and select a number from Contacts,
Recent Calls, or Memo.
4. When Ready to Send appears, press the DC button
to send the information.
Sending Contact Information
You can send contact information by selecting a
Contacts entry.
Contacts entries that contain only addresses cannot be
sent. When Contacts entries are received, they do not
include ring tones or pictures.
To send contact information during a call:
1. While in a Direct Connect call, press / > Contacts.
2. Highlight a Contacts entry and press / >
Send Via... > Direct Send.
Note
Making Calls
4. When you are finished, press Done (left softkey).
If the Contacts entry you scrolled to is a Group, you
may be prompted to allow yourself to be a part of the
group being sent. Press Yes (left softkey) to become
part of the group.
3. Making and Answering Calls
37
3. When Ready to Send appears, press the DC button
to send the contact information.
To start a call by sending contact information:
To view the information while still in the Direct Connect call:
䊳
Press / > View Contact.
1. From Contacts, highlight or select an entry.
You can also view My Info from other phones on the
Recent Calls list. See “7. Recent Calls” on page 93.
2. Press / > Send Via... > Direct Send.
Sending Groups Using Direct Send
Note
You can send a Group using Nextel Direct Send so that
the person who receives the Group can use the list.
If the Contacts entry you scrolled to is a Group, you
may be prompted to allow yourself to be a part of the
group being sent. Press Yes (left softkey) to become
part of the group.
3. Enter a Direct Connect number or press Browse
(left softkey) and select a number from Contacts,
Recent Calls or Memo.
4. When Ready To Send appears, press the DC button
to send the contact information.
Receiving My Info or Contact Information
When you receive My Info or contact information from
another phone, an icon appears on the display.
3 My Info
2 Contact Information
38
3. Making and Answering Calls
To send a Group from the Recent Calls list:
1. From Recent Calls, highlight a Group and press
/ > Send Group.
2. To include yourself in the Group, press Yes (left
softkey). To exclude yourself, press No (right
softkey).
Note
If you choose to include yourself and the Group
already contains 20 members, you will be prompted
that the list is full. You will be excluded from the list.
3. Enter a Direct Connect number or press Browse
(left softkey) and select a number from Contacts,
Recent Calls, or Memo.
4. When Ready To Send appears, press the DC button
to send the contact information.
To send a Group from Contacts:
1. From Contacts, highlight a Group and press / >
Send Via....
2. To include yourself in the Group, press Yes (left
softkey). To exclude yourself, press No (right
softkey).
3. Select Direct Send.
4. Enter a Direct Connect number or press Browse
(left softkey) and select a number from Contacts,
Recent Calls or Memo.
Talkgroups
A Talkgroup is a predetermined group of Direct
Connect users, created by an account administrator.
Talkgroups can contain up to 100 members.
Difference Between Group Connect and
Talkgroup Calls
In a Group Connect call, you or another caller
determines who can participate in the call. By contrast,
participation in a Talkgroup is determined by an
administrator. Here are the ways Group Connect and
Talkgroup calls differ.
5. When Ready To Send appears, press the DC button
The Group will appear in the Recent Calls list on the
phone to which you sent the Group.
Talkgroup
Group Icons
t
r
Geography
Nationwide
Limited to local
market and network
(fleet)
Maximum
Group Size
21 (including
originator)
100
3. Making and Answering Calls
Making Calls
Group
to send the Group.
39
Group
Talkgroup
Dynamically,
Predefined, via
via your phone Nextel administrator
using Talkgroup
Management
Setup
Voice Activated Yes
Dialing
No
Joining a Talkgroup
To participate in a Talkgroup, the account administrator
must first add you to the membership and then you
must “join” the Talkgroup.
Adding More Talkgroups
You can be included in additional Talkgroups by doing
one of the following:
䢇 Using Talkgroup Management at www.nextel.com. You
must be an account administrator to use Talkgroup
Management.
䢇 Contacting your Nextel Sales Representative at the
time of activation.
Making Talkgroup Calls
1. Press # and then enter the Talkgroup number.
– or –
1. Press Contacts (right softkey) and highlight a
Select the Talkgroup from Contacts or the Recent
Calls list.
Talkgroup.
2. Press Join (left softkey).
You can now receive communications from other
members of this Talkgroup.
You will hear all active Talkgroup conversations on your
phone. To silence them, press / > Push To Talk >
PTT Options > Tkgrp Silent and then select On.
40
3. Making and Answering Calls
2. Press the DC button and continue as if making a
Direct Connect call.
Receiving Talkgroup Calls
䊳
Answer it as you would a regular Direct Connect
call. Only one person at a time may speak on a
Talkgroup call.
Call Alerts
Responding to a Call Alert
Note
You can set a distinctive ringer for Call Alerts. See
“Ring Tones” on page 70.
To answer a Call Alert:
䊳
Press the DC button to make a Direct Connect call
to the sender.
Call Alerts let you notify others that you want to
communicate with them using Direct Connect. When a
user receives a Call Alert, the phone sounds a tone
and displays your name or Direct Connect number.
To clear a Call Alert:
Sending Call Alerts
To store a Call Alert in the Call Alert queue:
1. Enter a Direct Connect number and press Alert
(left softkey).
2. When “Ready to Alert” appears, press the DC
button to send the Call Alert.
Note
You can send a Call Alert from Recent Calls or
Contacts. Select a Direct Connect number and
continue as explained above.
䊳
䊳
Press Clear (right softkey).
Press Queue (left softkey).
Note
The Recent Calls list also stores Call Alerts you have
received. They appear as Direct Connect calls. Call
Alerts remain in your Recent Calls list until you delete
them or until they reach the end of the list.
Using the Call Alert Queue
When you queue a Call Alert, it remains in the Call Alert
queue until you make a Direct Connect call to the
sender or delete it.
3. Making and Answering Calls
41
Making Calls
During and immediately after a Talkgroup call ends,
press Options (right softkey) to display any available
options.
Viewing Call Alerts
1. Press / > Push To Talk > Call Alert.
2. Scroll through the list.
Viewing Call Alert Date and Time
1. Press / > Push To Talk > Call Alert.
2. Select a Call Alert and press r.
Responding to Call Alerts in the Queue
After you queue a Call Alert, you can respond to it by
making a Direct Connect call to the sender or sending
a Call Alert to the sender.
To make a Direct Connect call to the sender:
2. Highlight a Call Alert and press Alert (left softkey).
Ready to Alert appears on the display.
3. Press the DC button until Alert Successful appears
on the display.
Deleting Call Alerts
To delete a Call Alert from the queue:
1. From the Call Alert queue, highlight a Call Alert
and press / > Delete.
2. Press r or press Yes (left softkey) to confirm.
To delete all Call Alerts from the queue:
1. From the Call Alert queue, press / > Delete All.
2. Press r or press Yes (left softkey) to confirm.
1. Press / > Push To Talk > Call Alert.
2. Highlight a Call Alert and press the DC button to
Direct Talk
begin the call.
This removes the Call Alert from the queue.
To send a Call Alert to the sender:
1. Press / > Push To Talk > Call Alert.
42
3. Making and Answering Calls
Nextel Direct Talk allows for two-way radio
communication “off the network” between two or more
phones equipped with this capability. This feature is
useful in areas without network coverage.
When using Direct Talk mode, the two phones should
be a minimum of six feet apart to maximize
performance and improve transmission range. You can
only make Direct Talk calls to users located within your
range. This varies according to terrain, man-made
structures, and atmospheric conditions.
Most traditional phone features are not available in
Direct Talk mode, including on-network phone calls;
Direct Connect, Group Connect, Talkgroup calls, and
Call Alerts; data services; messaging; call timers; and
call forwarding.
Setting Your Phone to Direct Talk
Before you and another caller can use Direct Talk, both
of your phones must be set to Direct Talk mode.
1. Press / > Push To Talk > Direct Talk.
2. Select Go To Direct Talk.
After a few seconds, your channel and code appear on
the display screen. Your phone displays the last
channel and code used for Direct Talk.
To return to network mode from Direct Talk:
1. Press / > Push To Talk > DT Options.
2. Select Exit Direct Talk.
After a few seconds, your phone returns to network
service.
Code Direct Talk Calls
To make Direct Talk Code calls, both parties must be
on the same channel and code and have their phones
set to Direct Talk. Anyone within range who is set to the
same code and channel can hear all conversations.
3. Making and Answering Calls
43
Making Calls
You can make:
䢇 Code calls – two-way radio calls conducted off the
network and using open channels and codes. In
these calls, anyone using your same channel and
code can hear your conversation.
䢇 Private calls – two-way radio calls conducted off the
network and using the wireless phone numbers of
the participants. In these calls, others using the same
channel cannot listen in.
To set a channel and code:
1. In Direct Talk mode, press Edit (left softkey) >
Private Direct Talk Calls
2. Select Code and select a code.
Private Direct Talk allows you to silence all the calls on
a channel that are not directed specifically at you. To
do this, you must first set your phone to Private Only.
3. Press Back (right softkey) to return to the Direct Talk
To set your phone to Private Only:
Channel, and then select a channel.
standby screen.
Making and Receiving Code Calls in Direct Talk
Mode
䊳
In Direct Talk mode, press and hold the DC button.
Your phone displays Transmitting, along with the
channel and code selected.
The tone emitted from your phone when making a
Direct Talk call sounds different from the tone heard on
Direct Connect calls conducted on the network.
If you receive an error message, this means:
䢇 There may be no parties on your channel or code.
䢇 You are out of range.
When you receive a Code call using Direct Talk, your
phone displays Receiving, along with the channel and
code selected. Reply as on a Direct Connect call.
44
3. Making and Answering Calls
1. In Direct Talk mode, press Edit (left softkey) >
Code > Pvt Only.
2. Press Back (right softkey) to return to the Direct Talk
standby screen.
To reach you, other Direct Talk callers must be on your
same channel and dial your ten-digit wireless phone
number to reach you.
Note
You do not need to set your phone to Private Only to
receive Private calls. If you are on the same channel as
your caller, you can receive Private Direct Talk calls.
Making a Private Direct Talk Call
Receiving All Calls on a Channel
You can make Private Direct Talk calls to any person on
your same channel. You do not need to set your phone
to Private Only.
You can set your phone to receive all Direct Talk
transmissions that are within range and set to the same
channel. Do this by selecting Receive All, instead of a
code.
1. In Direct Talk mode, enter a ten-digit wireless
phone number. (You can also select a number
from Contacts or Recent Calls.)
2. Make the call in the same way you make a regular
Direct Connect call.
If you receive an error message, it means:
You may not be using a valid wireless phone
number.
䢇 The person that you are trying to reach may not be in
Direct Talk mode.
䢇 The person that you are trying to reach is set to a
different channel, or is out of range.
䢇
You cannot initiate a call when the code is set to
Receive All. If you press the DC button to initiate a
Direct Connect call and your code is set to Receive All,
you receive an error message.
To set the code to Receive All:
1. In Direct Talk mode, press Edit (left softkey) >
Code > Receive All.
2. Press Back (right softkey) to return to the Direct Talk
standby screen.
Making Calls
To make a private Direct Talk Call:
3. Making and Answering Calls
45
Making Emergency Calls While in Direct
Talk Mode
If you attempt to make an emergency 911 call while in
Direct Talk mode, your phone automatically exits Direct
Talk mode and attempts to find a network signal.
If you are out of network coverage, your phone cannot
make an emergency 911 call until you return to a
network coverage area. You must wait until the phone
reconnects to a network before attempting to make an
emergency 911 call.
46
3. Making and Answering Calls
⽧
Message Center (page 47)
⽧
Receiving Messages (page 48)
⽧
Voicemail (page 49)
⽧
Multimedia Messages (MMS) (page 50)
⽧
Text Messaging (SMS) (page 59)
⽧
Caller ID Blocking (page 60)
⽧
Call Waiting (page 60)
⽧
Making a Second Call (page 61)
⽧
Making a Three-Way Call (page 61)
⽧
Call Forwarding (page 62)
⽧
Making International Calls (page 64)
⽧
Special Dialing Codes (page 64)
⽧
Nextel Phone Services (page 65)
Message Center
Service Features
4. Service Features:
The Basics
The message center manages your messages. You
can listen to or view voicemail messages, Multimedia
Messaging Service (MMS) messages (which include
most phone-to-phone text messages), Net alerts, and
SMS text messages in the message center.
The message center also lets you create and send
MMS messages, including phone-to-phone text
messages. It stores messages you have sent and lets
you save drafts of messages you are creating.
Accessing the Message Center
䊳
Press / > Messages.
Message Center Options
After accessing the message center, select an option:
䢇 [Create Message] — begin creating an MMS message.
䢇 Voice Mail — access received voicemail messages.
䢇 Inbox — access received MMS and SMS messages.
䢇 Drafts — access MMS messages you have created
and saved but not sent.
4. Service Features: The Basics
47
䢇
Outbox — store MMS messages that were not sent.
䢇
Sent Items —access MMS messages you have sent.
䢇
Net Alert — access alerts that you receive from Nextel.
Receiving Messages
When you receive a voicemail message, Multimedia
Messaging Service (MMS) message, text message
(SMS), or Net alert, you have two ways to access the
message:
䢇 Respond to the message notification that appears
when the message is received.
䢇 Dismiss the message notification and access the
message later through the message center.
Message Notifications
When you receive a message, your phone notifies you
with text on the display and a notification tone or
vibration. You can access the message or dismiss the
notification.
䊳
48
To dismiss the message notification, press Later
(right softkey).
4. Service Features: The Basics
If you dismiss the notification, the message is not
deleted. You can access it through the message center.
If you are not on a phone call when you receive a
message, your phone sounds a notification tone every
30 seconds until you access the message, you dismiss
the notification, or the alert time-out expires.
When you are on a phone call, you can receive
message notifications for all types of messages except
MMS messages. For other types of messages, your
phone may sound a notification tone during the call or
after you end the call, depending on how you set your
notification options.
For information on notification options, see “Setting
Message Notification” on page 76.
Retrieving Your Messages
1. Press / > Messages.
2. Highlight a message type and press r.
Tip
To receive voicemail messages, you must first set up
your voicemail box.
If you are bringing your phone number from another
carrier, we suggest you set up your voicemail box
after the number you brought to Nextel is active on
your Nextel phone and your temporary phone
number is deactivated. If you set up your voicemail
box prior to this, all messages and all settings
(including your greeting and password) will be lost
when the number you have brought to Nextel
becomes active.
If you are setting up your voicemail from a phone other
than your Motorola Debut i856, dial your ten-digit
Nextel PTN. When you hear the greeting, press * to
access your voicemail box. The system will prompt you
to enter your password. Enter the last seven digits of
your Nextel PTN. For example: 5557777. This is your
temporary password. Follow the system instructions to
complete your mailbox setup.
You are in the main voicemail menu when you hear the
voicemail system options.
For details on using your voicemail, follow the audio
prompts provided by the voicemail system.
Playing Messages
Setting Up Your Voicemail Box
Using your Motorola Debut i856 phone, dial your tendigit Nextel Personal Telephone Number (PTN). For
example: 7035557777. Follow the system instructions
to create a new four- to seven-digit password, record
your name, and record a greeting. When the system
says, “Thank you for using Nextel Voicemail,” your
mailbox is set up.
䊳
When you receive a new voicemail message, you
can either listen to it immediately by pressing Call
(left softkey), or later by pressing Back (right
softkey).
䊳
To listen to your voicemail messages after
dismissing the onscreen prompt, press / >
Messages > Voice Mail. You will be connected to your
voicemail box.
4. Service Features: The Basics
49
Service Features
Voicemail
Multimedia Messages (MMS)
To open a message on the current page:
䊳
Multimedia Messaging Service (MMS) lets you send
and receive messages that may include text, pictures,
and audio recordings.
Your MMS address is PTN@messaging.nextel.com.
Your PTN is your ten-digit Nextel Personal Telephone
Number.
Note
Most common phone-to-phone text messages are
sent and received as MMS messages on your
Motorola Debut i856 phone. Text messages sent
from other phones or mobile devices to your phone
number arrive as MMS messages.
Accessing MMS Messages
1. Press / > Messages.
2. Select Inbox (also includes SMS messages), Drafts,
or Sent Items.
If you have more than 9 messages, scroll right or
left to display the next or previous page.
䡲
50
4. Service Features: The Basics
Highlight a message and press r.
Creating and Sending Messages
Each message you create may contain the following
fields:
䢇 To — the phone numbers or email addresses of one
or more recipients.
䢇 Message — the body of the message. This may
include text, pictures, ring tones, or voice records.
䢇 Subject — the subject line.
䢇 Attach — one or more attachments. These may be
pictures, ring tones, or audio files, including voice
records that you create while creating the message.
䢇 Cc — the phone numbers or email addresses of
additional recipients.
䢇 Auto Replies — lets you insert replies the recipient can
choose from when replying to your message, if the
recipient’s phone also has this feature.
䢇 Priority — sets the message priority to normal or high.
䢇 Valid Until — sets a date after which no more attempts
are made to deliver the message.
Entering Text
In message fields that require you to enter text, you can
begin entering the text from the keypad when the field
is highlighted.
To cancel the message at any time:
䊳
At the message screen, press Cancel (right softkey)
or press . to cancel the message and save it in
Drafts.
Creating a Message
1. Press / > Messages > [Create Message].
While entering text, press / to choose a text input
mode from the context-sensitive menu. (See “Entering
Text” on page 15.)
Tip
Message Size
2. Address the message:
You can create and send messages of up to 100 KB,
including attachments for MMS. The size of the
message appears at the top of the display as you are
creating the message.
䡲
You can also select [Create Message] from Inbox,
Drafts, or Outbox or begin messages from Contacts,
Recent Calls, Media Center, or standby mode, or by
replying to a message in your inbox.
Select To. Enter the phone number or email
address from the keypad and press r. Repeat
this action to enter more phone numbers or email
addresses.
Sending or Canceling
– or –
To send the message at any time after it has been
addressed:
Press Search (left softkey) to select recipients from
Contacts or Recent Calls. Highlight recipient(s),
press r to select them (entries will be checked),
and then press Done (left softkey).
䊳
Press Send (left softkey) or press / > Send.
4. Service Features: The Basics
51
Service Features
To send a message, you must address it to at least one
recipient. All other message fields are optional and you
can fill them in any order.
Tip
To remove a phone number or email address from
the list of message recipients, highlight the phone
number or email address and press Remove (left
softkey).
3. To enter or edit the body of the message:
䡲
Select Message and then use any of the following
options to enter your message.
Note
If you have created a signature, the signature
automatically appears in this field. Text you enter
appears before your signature. (See “Adding a
Customized Signature” on page 78.)
●
●
●
Enter text from the keypad.
Use a Quick Note. See “Quick Notes” on
page 54.
Insert a picture, a ring tone, or an audio file.
See page 54.
When you are finished, press r.
4. To send the message without additional options,
press Send (left softkey) or press / > Send.
Adding More Message Options
1. To view more fields in a message, scroll to MORE
and press r.
2. To create or edit the subject line, select Subject,
enter a subject, and press r.
3. To attach a picture, audio, voice recording, or
video, select Attach > [New Attach] and then select
an option to attach a file.
4. To add CC’s, select Cc and add recipient(s).
5. To insert replies the recipient can choose from
when replying to your message, select Auto Replies.
Enter text from the keypad or select a Quick Note
(see “Quick Notes” on page 54). Press Back (right
softkey) when you are finished.
䡲
6. To set the priority of the message, select Priority
and then select a setting.
7. To set a date after which attempts to deliver the
message end:
Select Valid Until, enter a date, and
press r.
䡲 To set no date, press No Date (left softkey).
䡲
52
4. Service Features: The Basics
press / > Send.
Tip
To create new reply phrases to use in later reply
messages, see “Quick Notes and Reply Phrases” on
page 77.
Note
If the message you are replying to was sent with auto
replies, it contains a numbered list of possible replies.
Press the number of a reply. The reply is sent
immediately without any further action.
Replying to a Message
You can reply to a read message while you are viewing
it or while it is highlighted in the Message Center. You
cannot reply to unread messages.
When you reply to a message, some of the fields in
your reply are filled in automatically. These may include
To, Message (the first 40 characters of the received
message), Subject, and Cc.
To reply to a message:
1. Display or highlight a read message and press
Reply (left softkey). (To reply to the sender and all
recipients, press / > Reply All.)
2. Select [Create Reply] and enter a reply message or
select a short reply from the list.
3. Edit any applicable message fields and press r.
4. Press Send (left softkey).
Service Features
8. To send the message, press Send (left softkey) or
More Ways to Begin a Message
In addition to beginning a message from the Message
Center, you can begin a message from Contacts, the
Recent Calls list, standby mode, or the Media Center.
To begin a message from Contacts:
1. From the Contacts list, highlight an entry.
2. Scroll left or right to view the Contacts types until
you see the icon for the phone number or email
address to which to send the message.
3. Press Create (left softkey) or press / >
Create Message.
4. Create and send the message.
4. Service Features: The Basics
53
To begin a message from the Recent Calls list:
1. From the Recent Calls list, highlight an entry.
2. If the entry has more than one phone number
stored, display the phone number to which to send
the message.
3. Press Create (left softkey) or press / > Create.
4. Create and send the message.
To begin a message from standby mode:
䊳
Enter a phone number and press / >
Create Message.
To begin a message from the Media Center:
1. From the Media Center, highlight or select a picture
or audio file.
2. Press Send (left softkey).
3. Create and send the message. The selected file is
automatically included as an attachment.
Quick Notes
When you are filling in the Message and Subject
message fields, you can add preset words or phrases
54
4. Service Features: The Basics
called Quick Notes. After you add Quick Notes, you
can edit them as you would any other text.
To insert a quick note:
1. While you are creating a message, highlight or
select Message or Subject and then press QNotes
(left softkey).
2. Select a Quick Note to insert into the message.
Tip
To add a quick note after you have already started
entering a message, press / > Insert >
Insert QNotes, and select a note.
To create new Quick Notes to use in later messages,
see “Quick Notes and Reply Phrases” on page 77.
Inserting Pictures or Videos
You can insert pictures or videos from Media Center. If
the forward locked icon (u) appears next to a file, it
cannot be included in a message.
1. Highlight the Message field and press / > Insert >
Insert Picture or Insert Video (You will see a list of
available pictures or videos.) Scroll right or left to
display files in the phone’s memory or on the
memory card.
Removing an Inserted Item
Note
To remove an item inserted into a message:
You can also select Capture Picture or Capture
Video to take a new picture or video to send.
1. Select the Message field and highlight the item by
scrolling to the right.
Inserting Audio Files or Voice Records
You can insert audio files from the Media Center or
voice records from your voice records list. Preloaded
audio files or files with the forward locked icon (u)
cannot be included in a message.
1. Highlight the Message field and press / > Insert >
Insert Audio. (You will see a list of available audio
files.)
Tip
To hear an audio file before inserting it, highlight the
file name and press Preview (left softkey).
2. Highlight an audio file or voice record and
press r. (Scroll right or left to display available
files in the phone’s memory or on the memory
card.)
䡲 To record a voice record, select Record Voice and
record a new voice record.
Service Features
2. Highlight a picture or video and press r.
2. Press Delete (left softkey).
Note
You can also attach items to messages by selecting
MORE and then selecting Attach.
Drafts
While you are creating a message, you can save it in
Drafts before you send it. You can view, edit, send, or
delete saved drafts.
Saving a Message in Drafts
䊳
While you are creating a message, press / >
Save in Drafts and the message will be saved in
drafts.
After saving, you can continue to create the message.
The version you saved in Drafts will not change.
4. Service Features: The Basics
55
Accessing Saved Drafts
䊳
2. Highlight a message and press Resend (left
softkey).
Press / > Messages > Drafts.
Sent Items
Note
If your message was sent successfully, Resend will
not appear as an option.
The Sent Items folder holds all messages that have
been sent.
Receiving a Message
Forwarding Sent Items
When you receive an MMS message, a message
notification appears on the display.
1. Press / > Messages > Sent Items.
2. Highlight a message and press / > Forward.
To view the message:
䊳
3. Address, edit, and send your message.
Outbox
Messages you tried to send are stored in the Outbox.
Resending Messages
If a message was not sent from your phone, you can
resend it.
1. Press / > Messages > Outbox.
Press r or press Read (left softkey). The message
is downloaded from the message server.
To dismiss the message notification:
䊳
Press Later (right softkey).
This icon 2 appears on the display, reminding you that
you have a new message.
Threaded Inbox
The threaded inbox allows you to organize your
messages by subject or sender.
1. From your inbox highlight a message.
56
4. Service Features: The Basics
Sender.
Navigating a Message
As you scroll through a message, numbers, email
addresses, and Web addresses are highlighted.
Pictures and audio recordings are also highlighted.
Embedded Objects and Attachments
Messages may contain pictures or audio files as part of
the body of the message or as attachments.
If a message contains pictures or audio files in the
body of the message, highlight each picture or audio
file to view or play it.
If a message contains a picture or audio file as an
attachment, highlight the attachment and press r to
view the picture or play the audio file.
Note
Audio files in messages do not play if VibeAll is
set to On.
Actions for Received Messages
Deleting
To delete unread messages:
1. Highlight a message and press Delete (left softkey).
2. Press r or press Yes (left softkey) to confirm.
To delete read messages:
1. Highlight or view a message and press / >
Delete Message.
2. Press r or press Yes (left softkey) to confirm.
Forwarding
1. Highlight or view a message and press / >
Forward.
2. Address, edit, and send your message.
Embedded objects and attachments are included
when you forward a message.
4. Service Features: The Basics
57
Service Features
2. Press / > Threading and select None, Subject or
Locking and Unlocking
3. Press the DC button.
When you lock a message, it cannot be deleted until
you unlock it.
To make a Talkgroup call to a Talkgroup ID in a message:
Highlight or view a message and press / >
Lock Message or Unlock Message.
2. Highlight a Talkgroup ID and then press / >
䊳
Calling a Number in a Message
If any field in a message contains a phone number,
Direct Connect number, or Talkgroup ID, you can call
or send a Call Alert to that number.
To make a call to a number in a message:
1. View the message.
2. Highlight a number and press , to make a
phone call or press the DC button to make a Direct
Connect call.
To send a Call Alert to a Direct Connect number in a
message:
1. View the message.
2. Highlight a Direct Connect number and then press
press / > Alert.
58
4. Service Features: The Basics
1. View the message.
Talkgroup.
3. Press the DC button.
Storing Message Information to Contacts
If a message you receive contains a phone number,
Direct Connect number, Talkgroup ID, or an email
address in any of the fields, you can store this
information to Contacts.
1. View the message.
2. Highlight a number or email address and then
press / > Save Number or Save Email.
3. Select [New Contact] to store the number in a new
entry, or select an entry to store the information to
an existing entry.
4. With the Contacts type field highlighted, scroll left
or right to display a Contacts type for the number
or email address.
Text Messaging (SMS)
Going to a Website
If a message contains one or more Web addresses,
you can go to the website.
1. View the message.
2. Highlight a Web address and then press / >
Go To Website.
Note
With text messaging (SMS), you can receive instant text
messages from another messaging-ready phone or
from an email account.
Your phone's SMS address is PTN@page.nextel.com.
Your PTN is your ten-digit Personal Telephone Number.
Note
The entire Web address must appear in the
message. Otherwise, you cannot go to the website.
Saving Attachments or Embedded Files
Your phone can receive SMS text messages, but it
cannot send them.
1. View a message.
2. Highlight an attachment or an embedded picture
or audio file and then press / > Save Picture,
Save Audio or Save Attachment.
Most traditional phone-to-phone text messages
arrive as MMS messages on your Motorola Debut
i856 phone. Your phone can send and receive MMS
messages.
Accessing Text Messages
䊳
When you receive a text message, you will see an
alert. Press Read (left softkey) to display the
message.
4. Service Features: The Basics
59
Service Features
5. Press Save (left softkey).
Caller ID Blocking
Call Waiting
Caller ID allows people to identify a caller before
answering the phone by displaying the number of the
incoming call. If you do not want your number
displayed when you make a call, follow these steps.
Call Waiting lets you receive a second call while on an
active call. Call Waiting is always available, unless you
turn it off for a specific call.
Per-Call Blocking
To block delivery of your number for a single phone call:
䊳
Press *67 before dialing the call.
Your Nextel phone number cannot be blocked from
calls made to 911, 800, 855, 866, 877, 888, or other
toll-free phone numbers.
Per-Line Blocking
You can request that Nextel Customer Service
permanently block delivery of your phone number on
every call you make. In this case, you may need to
display your number for certain calls.
To show your number on a per-call basis:
䊳
60
Press *82 before dialing the call.
4. Service Features: The Basics
If you are on a call and receive a second call, your
phone emits a tone and displays a message.
To accept the second call and put the active call on hold:
䊳
Press Yes (left softkey).
To accept the second call and end the active call:
1. Press .. Your phone rings with the second call.
2. Answer the second call.
To decline the second call:
䊳
Press No (right softkey). If you subscribe to
voicemail, the call is forwarded to your voicemail
box, unless you set Call Forward or If Busy to a
different number.
To turn off Call Waiting before a call:
䊳
Press *70 before dialing the call. Call Waiting
is reactivated once the call ends.
To turn off Call Waiting during a call:
䊳
Press / > In Call Setup > Call Waiting > Off.
Tip
To turn Call Waiting back on while still on the call, set
this option to On.
Making a Second Call
To end the second call and make the on-hold call active:
䊳
Service Features
Turn Off Call Waiting
Press .
To make the on-hold call active and put the active call on
hold:
䊳
Press Switch (right softkey).
Making a Three-Way Call
With Three-Way Calling, you can talk to two people at
the same time. When using this feature, the normal
airtime rates will be charged for each of the two calls.
1. During an active phone call, press / > 3 Way.
1. Place or receive a phone call.
2. While the call is active, press / > 2nd Call. (The
first call is placed on hold.)
3. Enter a second phone number and press , to
place the call.
Note
For quick ways to enter the number, press /.
(The first call is placed on hold.)
2. Enter a second phone number and press ,.
3. Press Join (right softkey).
If one of the people you called hangs up during the
call, you and the remaining caller stay connected. If you
initiated the call and are the first to hang up, all callers
are disconnected.
4. Service Features: The Basics
61
To merge two calls into a three-way call:
1. During an active phone call, press / > 2nd Call.
& Phone line 1 is active; calls to phone line 1 are
being forwarded.
(The first call is placed on hold.)
2. Enter a second phone number and press ,.
3. Press / > Join.
Call Forwarding
Call Forwarding lets you forward all your incoming calls
to another phone number – even when your phone is
turned off. You can continue to make calls from your
phone when Call Forwarding is activated.
Call Forwarding sends calls to the phone numbers you
specify. You can forward all calls to one number or
forward missed calls to different numbers depending
on the reason you missed the call.
Forwarding All Calls
When you set your phone to forward all calls, an icon
appears in the top row of the display:
62
4. Service Features: The Basics
) Phone line 1 is active; calls to phone line 2 are
being forwarded.
; Phone line 1 is active; calls to phone lines 1
and 2 are being forwarded.
( Phone line 2 is active; calls to phone line 1 are
being forwarded.
* Phone line 2 is active; calls to phone line 2 are
being forwarded.
< Phone line 2 is active; calls to phone lines 1
and 2 are being forwarded.
To forward all calls:
1. Press / > Settings > Phone Calls > Call Forward >
Forward > All Calls.
2. Select To.
䡲
If you specified a forwarding number for all calls
before, this number appears.
3. To enter a forwarding number:
䡲
Enter the number or press Search (left softkey),
select Contacts, Recent Calls or Memo and then
select a number.
4. Press r. All your calls are now forwarded to the
number you specified.
䢇
䢇
If Busy — Your phone is on a call or transferring data.
Service Features
To forward calls to this number, highlight it and
press r.
䡲 To delete this number, press r and then press
and hold Delete (left softkey).
䡲
If No Answer — You do not answer on the first four
rings.
䢇
If Unreachable — Your phone is out of coverage or
powered off.
Note
You are charged a higher rate for calls you have
forwarded.
To forward missed calls:
1. Press / > Settings > Phone Calls > Call Forward >
Forward > Detailed.
Turning Off Call Forwarding
Note
1. Press / > Settings > Phone Calls > Call Forward > To.
2. Set this option to Off.
If your phone is set to forward all calls, you must first
turn off call forwarding to access this option. (See
“Turning Off Call Forwarding” on page 63.)
All your calls are now sent to your phone.
2. Select If Busy to specify a forwarding number for
Forwarding Missed Calls
3. If you specified a forwarding number for this type
Calls you miss are forwarded according to the options
set for missed calls. By default, missed calls are
forwarded to voicemail.
You can specify a forwarding number for each type of
missed call:
calls received when your phone is busy.
of call before, this number displays.
To forward calls to this number, highlight it, press
r, and go to step 6.
䡲 To delete this number, press r, and then press
and hold Delete (left softkey).
䡲
4. Service Features: The Basics
63
4. To enter a forwarding number:
䡲
Enter the number or press Search (left softkey),
select Contacts, Recent Calls or Memo and then
select a number.
5. Press r.
6. Repeat step 2 through step 5 for If No Answer and
If Unreachable.
7. When you are finished, press Back (right softkey).
Making International Calls
Your service default is “International Calls Restricted.”
Contact Nextel Customer Service to obtain
international dialing access.
Calls placed between the United States and Canada
do not require an international access code.
64
4. Service Features: The Basics
Special Dialing Codes
Non-Emergency Numbers
Nextel supports many “non-emergency” numbers
(such as #77, 311, and 511) provided by local and state
governments. These numbers are used to report
non-emergency incidents. If the situation includes
imminent danger or loss of life, you should dial 911.
Telecommunications Relay Service
Nextel supports services for communicating with
speech and/or hearing impaired individuals. You can
dial 711 to reach a local Telecommunications Relay
Center. You will then be connected to your destination
number. Relay service works through a
Communications Assistant who reads messages typed
into a TDD/TTY device by a speech or hearing
impaired individual to you. The Communications
Assistant then types your spoken messages to the
hearing or speech impaired individual.
Telecommunications Relay Service is available 24
Note
Using 711 to reach Telecommunications Relay
Service may not be available in all areas.
The TTY device must be connected to the phone
through the micro USB port. A 2.5 mm to micro USB
adapter is required to support TTY.
To enable TTY mode:
1. Press / > Settings > Phone Calls > TTY > Use TTY.
2. Select On to enable TTY mode.
3. For TTY options, highlight Type, press r and then
select an option:
TTY – Type and read text on your TTY device.
䡲 VCO (Voice Carry-Over) – Speak into the phone
and read text replies on your TTY.
䡲 HCO (Hearing Carry-Over) – Type text on your
TTY and listen to voice replies on your phone.
䡲
Nextel Phone Services
Service Features
hours a day, seven days a week, and every call is
strictly confidential.
Contact Nextel Customer Service to obtain these
services or for additional information.
Note
Some services are not available outside of the
continental United States.
Second Line Service
You can have two different phone numbers on the
same phone. With Second Line Service, you can:
䢇 Get separate bills for each phone line.
䢇 Bring in an existing wireless or home phone number
to Nextel to activate on the second line.
䢇 Have two different area codes (must be in same
market) to convey a local image to callers.
䢇 Use different ringer styles so that you can tell which
line is receiving a call.
䢇 Forward incoming calls to either your primary or
alternate line phone number.
䢇 Choose a Second Line Service plan that fits your
needs.
4. Service Features: The Basics
65
In order to activate Second Line Service, contact your
Nextel Sales Representative or call Nextel Customer
Service.
To set the active line (primary or alternate):
1. Press / > Settings > Phone Calls > Set Line.
2. Select a phone line to be active.
When incoming calls are made to a non-active line,
they will be sent to voicemail without ringing. (See “Call
Forwarding” on page 62.)
66
4. Service Features: The Basics
Sprint 411
Dial 411 from your wireless phone to receive
nationwide listings, movie listings and showtimes,
restaurant reservations, and driving directions, as well
as sports scores, stock quotes, and weather conditions.
Spanish speaking operators available. Receive up to
three phone numbers or pieces of information per call,
and be automatically connected at no additional
charge. Airtime and other charges apply.
Opening the Browser
5. Data Services
䊳
Press / > Web > Net.
Options available under the home page include:
Business Tools – Provides access to business tools.
䢇 Text Messaging – Provides access to text messaging.
䢇 Games, Ringers, & More – Provides access to
downloadable items.
䢇 News, Sports & More – Lets you access news services.
䢇 NASCAR –Gives you access to NASCAR news and
stats and provide a link to download NASCAR Sprint
Cup Mobile.
䢇 Email & IM – Allows you to send email and IMs.
䢇 Your Bookmarks – Allows you to access and manage
your bookmarks.
䢇 Search – Launches a Web search.
䢇 Go to URL – Lets you enter website addresses.
䢇 My Account – Lets you configure and manage your
browser settings.
䢇 Help – Displays online help.
⽧
Wireless Data Services (page 67)
⽧
Downloading Content (page 69)
Wireless Data Services
With Web access on your phone, you can browse your
favorite websites, making it easier than ever to stay
informed while on the go. Follow sports scores,
breaking news, and weather, and shop on your phone
anywhere on the Nextel National Network.
Using the Web Browser
Navigating the Web from your phone is easy once you
get the hang of it.
5. Data Services
67
Data Services
䢇
Tip
To go back one page, press the * key .
To access the browser menu options, press and
hold / from any Web page.
Going to a Specific Website
To go to a particular website by entering a Web address
(URL):
1. From the home page, select Go to URL.
2. Highlight Mark this page and press r.
3. Confirm or edit the bookmark name, scroll to the
bottom of the screen, and then press Done (left
softkeys) to save the bookmark.
Note
Bookmarking a page does not store the page
contents, just its address.
Some pages cannot be bookmarked. Whether a
particular Web page may be marked is controlled by
its creator.
2. Press Edit (left softkey).
3. Use your keypad to enter the Web address and
press Done (left softkey).
4. Press Options (right softkey) > accept to go to the
website.
Note
Not all websites are viewable on your phone.
Creating a Bookmark
Bookmarks allow you to store the address of your
favorite websites for easy access at a later time.
1. Go to a Web page and press and hold / to open
the browser menu.
68
5. Data Services
Accessing a Bookmark
From the home page:
1. Select Your Bookmarks.
2. Highlight a bookmark and press r (or press the
number corresponding to the bookmark).
From any other Web page:
1. Press and hold / to open the browser menu.
2. Select View Bookmarks.
number corresponding to the bookmark).
Tip
To return to the home page from any other Web
page, press ..
Reloading a Web Page
1. Press and hold / to open the browser menu.
2. Select Refresh this page. (The browser will reload the
current Web page.)
Restarting the Web Browser
If the Web browser seems to be malfunctioning or
stops responding, you can usually fix the problem by
simply restarting the browser.
Downloading Content
Your phone arrives with Java applications and games
loaded and ready to install. You can download and
install more Java applications. For more information on
Java Security, see “Setting Privacy for Each Java
Application” on page 89.
Check the Games, Ringers & More menu option for a
catalog of items available for purchase and download.
You can also go to www.nextel.com and sign on to your
account for a wide selection of available Java
applications and downloading instructions.
Note
Using Java applications may cause your phone’s
battery power to deplete more quickly.
1. Press and hold / to open the browser menu.
2. Select More... > Restart Browser.
5. Data Services
69
Data Services
3. Select a bookmark and press r (or press the
Sound Settings
6. Settings
Ring Tones
Your phone provides a variety of ringer options that
allow you to customize your ring and volume settings.
These options allow you to identify incoming calls and
messages by the ring.
⽧
Sound Settings (page 70)
⽧
Display Settings (page 74)
⽧
Messaging Settings (page 76)
⽧
Airplane Mode (page 78)
1. Press / > Multimedia > Ring Tones.
⽧
Setting One Touch Direct Connect (page 79)
2. Scroll through the list of ring tones. A sample
⽧
Headset Options (page 79)
⽧
Profiles (page 79)
⽧
Phone Setup Options (page 83)
⽧
DC/GC Options Menu (page 90)
⽧
Security Settings (page 90)
Selecting Ringer Types
ringer will sound as you highlight each option.
3. Press r or press Assign (left softkey).
4. Select the function(s) to which to assign the current
ringer by highlighting the option and pressing r.
(A check mark appears next to selected options.)
5. When you are finished, press Done (left softkey) to
assign the ringer to the selected function(s).
70
6. Settings
Assigning a Ring Tone to a Contact
Downloading More Ring Tones
You can also assign a ringer to a specific contact entry
so you know who's calling without looking at the
phone.
To use other ring tones, you can download them into
your phone for a fee.
2. Scroll through the list of ring tones and select one.
A sample ringer will sound as you highlight each
option
3. Press r or press Assign (left softkey).
4. Select A Contact....
5. Highlight a Contacts entry and press r to assign
the ringer.
Viewing Ring Tone Assignments
1. Press / > Multimedia > Ring Tones.
2. Make sure Vibrate All is set to Off.
3. Highlight any ring tone and then press / >
Overview.
4. Scroll to view ring tones assigned to features and
Contact entries.
䊳
Press / > Multimedia > Ring Tones > Buy Ring Tones.
Note
Ring tones may be downloaded only once. If you
delete a ring tone from your phone and wish to
reassign it, you must purchase it again.
Managing Memory
To view the amount of memory available for custom ring
tones:
1. Press / > Multimedia > Ring Tones.
2. Make sure Vibrate All is set to Off.
3. Highlight any ring tone and press / >
Memory Usage.
Deleting custom ring tones frees memory.
Settings
1. Press / > Multimedia > Ring Tones.
Deleting Ring Tones
Deleting a ring tone from the list deletes it from your
phone.
6. Settings
71
In most cases, when you delete a ring tone that you
purchased from your phone, you will have to purchase
it again.
To delete a ring tone:
1. Press / > Multimedia > Ring Tones.
2. Make sure Vibrate All is set to Off.
3. Highlight a ringtone and press / > Delete.
4. Press Yes (left softkey) to confirm.
Vibrate Settings
Vibrate All
The Vibrate All option allows you to be notified of calls
and messages with a vibration instead of an audible
alert.
To activate Vibrate All:
䊳
Press and hold the volume button down in standby
mode. (Pressing and holding displays “VibeAll:
On.” Continuing to hold the button down displays
“VibeAll: Locked.”
– or –
72
6. Settings
Press / > Multimedia > Ring Tones > Vibrate All. Set
this option to On or Locked.
Tip
Setting this option to Locked requires you to press
and hold the volume control up to turn Vibrate All off.
The Locked option helps prevent you from
accidentally turning Vibrate All off.
To deactivate Vibrate All:
1. Press and hold the volume key up to unlock
vibrate all.
2. Press the volume key up repeatedly to select a
volume level or press / > Multimedia > Ring Tones >
Vibrate All > Off.
These icons indicate how the ringer is set:
The phone always vibrates instead of
/ making a sound.
The phone vibrates instead of making a
. sound for phone calls.
Direct Connect calls, Group Connect
" calls, and Talkgroup calls are heard
through the earpiece, not the speaker.
/ The phone vibrates then rings for all calls.
, The ring volume is set to zero for all calls.
To activate Silence All:
䊳
Ring and Vibrate
With the phone in standby mode press and hold
the volume key down until the ringer level is set
at 0. (The screen will display ,.)
To deactivate Silence All:
1. Press / > Multimedia > Ring Tones.
2. Make sure Vibrate All is set to Off.
䊳
Press the volume key up repeatedly to select a
volume level.
To set your phone to vibrate instead of making a sound for
some features but not others:
3. Scroll through the list and select a ring tone.
1. Press / > Multimedia > Ring Tones.
4. Press / > Assign w/Vibe.
2. Make sure Vibrate All is set to Off.
5. Select Phone Line 1 and/or Phone Line 2 and press
3. Select Vibrate from the list of ring tones.
Done (left softkey).
This icon/ appears on the display.
Silence All
The Silence All option allows you to mute all sounds
without turning your phone off.
4. Select the feature(s) to which to assign Vibrate and
press Done (left softkey).
Note
To set ring options for Direct Connect calls, Group
Connect calls, and Talkgroup calls, see “Vibrate
Settings” on page 72.
6. Settings
Settings
To set your phone to ring and vibrate when you receive
phone calls or Call Alerts:
73
Adjusting the Phone’s Volume Settings
Display Settings
Adjust your phone’s volume settings to suit your needs
and your environment.
Changing the Backlight Time Length
1. Press / > Settings > Volume.
2. Select Ringer/Alerts, Speaker, Earpiece, Multimedia or
Keypad.
3. Choose a volume level and press r.
Tip
You can adjust the ringer volume in standby mode
(or the earpiece volume during a call) by using the
volume key on the left side of your phone.
Beep
Set your phone to alert you with an audible tone once
a minute during a voice call.
1. Press / > Settings > Phone Calls > Minute Beep.
2. Highlight On or Off and press r.
Select how long the display screen and keypad remain
backlit after any keypress is made.
1. Press / > Settings > Display/Info > Backlight.
2. Highlight an option, press r, and then choose a
setting.
For Timer or Java Timer, select a time.
䡲 For Sensor or PTT Backlight select On or Off.
䡲
Note
Long backlight settings reduce the battery’s talk and
standby times.
Changing the Display Screen
Choose what you see on the display screen while
powering on or off and when in standby mode.
1. Press / > Settings > Display/Info > Wallpaper.
2. Select an image and press View (left softkey) to view
it. Press Back (right softkey) to return to the
available images.
74
6. Settings
Setting Wallpaper to Change Automatically
When you set your wallpaper to change automatically,
your phone uses each of the pictures in Media Center as
wallpaper, cycling through them at a pace you choose.
1. Press / > Settings > Display/Info > Wallpaper >
Auto Cycle.
2. Select how frequently the wallpaper will change
then press r.
Changing the Phone’s Menu Style
Choose how your phone’s menu is displayed on the
screen.
1. Press / > Settings > Display/Info > Menu View.
2. Highlight an option and press r.
䡲
Icon View to view the main menu as a grid of
䡲
List View to display the menu as a list.
䡲
Tab View to display the menu as a row of icons on
icons. Icons animate when they are highlighted.
the bottom of the screen.
Changing the Theme
Customize your phone’s display appearance by
selecting a theme to reflect your personality.
1. Press / > Settings > Display/Info > Theme.
2. Highlight an option and press r.
Changing the Clock Display
Select a format for the time and date display and
choose whether the time and date appear in standby
mode.
1. Press / > Settings > Display/Info > Clock.
2. Select Display On/Off, Time Format or Date Format and
then press r.
3. Select an option and press r to apply the setting.
Note
The year is set by the network, and even though it is
an option, it cannot be changed.
Settings
3. Press r to assign an image.
Changing the Text Size
Adjust the font when entering text (for example, when
using the notepad or when adding a Contacts entry).
6. Settings
75
1. Press / > Settings > Display/Info > Text Size.
2. Highlight an option and press r.
Messaging Settings
Staying connected to your friends and family has never
been easier. With your phone’s advanced messaging
capabilities, you can send and receive many different
kinds of text messages without placing a voice call.
(For more information see “Multimedia Messages
(MMS)” on page 50.)
Messaging settings make messaging easier by letting
you decide how you would like to be notified of new
messages, create a signature with each sent message,
and create your own preset messages.
Setting Message Notification
When you receive a message, your phone notifies you
by displaying an icon on your display screen. You can
also choose to be notified with a sound while making a
phone call.
1. Press / > Settings > Phone Calls > Notifications.
76
6. Settings
2. Highlight Receive All, Message Mail Only or Delay All
and press r.
Note
Delay All is the default setting.
Tip
To set notification options during a call press / >
In Call Setup > Notifications.
Customizing MMS
The Setup menu lets you customize MMS for your
phone:
䢇 Signature — Enter text here to create a signature that is
automatically inserted at the end of each message.
䢇 Quick Notes — lets you create new Quick Notes and
edit or delete Quick Notes you have created.
䢇 Cleanup — controls how long messages remain in the
Inbox and Sent Items before they are deleted.
䢇 Dlvy Rpt Default— allows you to set the default for the
Delivery Report Option to on of off.
䢇 Memory Size — displays a report on phone memory.
䢇 MMS Setup — allows you to set up the following:
䡲 Friendly Name — lets you enter the name displayed
in the From field on messages you send.
Download Options — lets you control message
downloads. Automatic downloads messages
automatically. Manual requires you to reply to a
prompt before messages download to your
phone.
䡲 Replies — lets you create new reply phrases and
edit or delete reply phrases you have created.
䡲
To access the Setup menu:
1. Press / > Messages.
2. Highlight [Create Message] and press / > Setup.
Tip
This option is available from many context-sensitive
menus when you are using MMS.
To edit a Quick Note or reply phrase:
1. From the Setup menu, select Quick Notes or
MMS Setup > Replies.
2. Select a Quick Note or reply phrase you have
created.
3. Edit the text and press r.
To delete a Quick Note or reply phrase:
1. From the Setup menu, select Quick Notes or
MMS Setup > Replies.
2. Highlight a Quick Note or reply phrase you have
created.
3. Press Delete (left softkey) and then press r or
To add a Quick Note or Reply phrase:
1. From the Setup menu, select Quick Notes or
MMS Setup > Replies.
2. Select [New Quicknote] or [New Reply], or press
New (left softkey).
3. Enter text and press r.
press Yes (left softkey) to confirm.
Note
You can edit or delete all Quick Notes. You can only
edit or delete Reply phrases that you created.
Settings
Quick Notes and Reply Phrases
Setting the Cleanup Option
The cleanup option controls how long messages
remain in the Inbox and Sent Items before they are
deleted. You set the cleanup option for the Inbox and
Sent Items separately.
6. Settings
77
The cleanup option deletes only read, unlocked
messages.
Airplane Mode
To set the cleanup options:
Sometimes you may want to have your phone on, but
turn off its ability to make and receive calls and other
transmissions.
1. From the Message Center, press / > Setup >
Cleanup > Inbox or Sent Items.
2. Choose a cleanup option.
3. To automatically delete messages now, press r
or press Yes (left softkey). To delete messages later,
press No (right softkey).
Adding a Customized Signature
Add a customized signature to each message you
send.
1. Press / > Messages > / > Setup > Signature. If you
do not wish to attach a signature to your outgoing
messages, press Delete (left softkey).
To set your phone so that it cannot make or receive phone
calls, Direct Connect calls, Group Connect calls, Talkgroup
calls, or transfer data:
1. Press / > Settings > Advanced > Transmitters.
2. Select Off and press r.
3. Press Yes (left softkey).
When in Transmitters Off mode, your phone’s standby
screen displays “Transmitters Off.”
Note
2. Enter a signature and press r. (See “Entering
Text” on page 15.)
To restore your phone’s ability to do all these things:
䊳
78
6. Settings
While powering on your phone, you can turn
transmitters off by pressing . for more than five
seconds.
Set this option to On and then press Yes (left
softkey).
Note
When Transmitters is set to Off, your phone’s
Bluetooth capability is disabled, and all active
Bluetooth connections are dropped.
Setting One Touch Direct Connect
One Touch Direct Connect sets your phone to call the
most recent Direct Connect number or Group on the
Recent Calls list, or a Direct Connect number you
choose, every time you press the DC button.
1. Press / > Push To Talk > PTT Options >
Headset Options
To set your phone to send incoming sound to a headset
only, or to a headset and a speaker at the same time:
1. Press / > Settings > Advanced > Headset/Spkr.
2. Select HdsetOnly to send incoming sound to the
headset only.
– or –
Select Hdset&Spkr to send incoming sound to the
headset and ring tones to the speaker.
One Touch DC.
2. Select from Off, Quick PTT, Last Call, Assigned Number,
Profiles
Send Picture, Send My Info or Send Contact and
If you are entering a Talkgroup number, enter #
before the number.
A profile is a group of settings saved together so that
you can apply them to your phone easily.
Your phone arrives with preset profiles. You can also
create your own profiles.
6. Settings
Settings
press r.
Tip
79
Viewing Profiles
To view the profiles stored in your phone:
When you do this, your phone either:
䢇 Updates the profile in effect to reflect these changes,
without notifying you.
1. Press / > Tools > Profiles.
2. Highlight a profile and press View (left softkey).
Tip
The profile that is currently in effect on your phone
has a checkmark next to it.
3. Scroll to view settings.
Switching Profiles
1. Press / > Tools > Profiles.
2. Highlight a profile and press r.
The profile you selected is now in effect.
How Changing Settings Affects Profiles
Many of the settings contained in profiles can be set
without switching or editing profiles — for example, by
selecting Settings or Ring Tones to set options, or by
setting the volume of the phone’s ring using the
volume controls.
80
6. Settings
䢇
– or –
Creates a temporary profile that contains these
changes.
To set your phone to create a temporary profile that contains
changes you make to settings:
1. Press / > Tools > Profiles.
2. Press / and then select Setup > Temp Profile.
3. Set this option to On.
To set your phone to update the profile in effect to reflect any
changes you make to settings:
䊳
Set Temp Profile to Off in step 3 above.
Temporary Profiles
If your phone is set to create temporary profiles, a
temporary profile is created when you make changes
to settings without switching or editing profiles. These
stay in effect until you switch profiles or power off your
phone.
Storing a Temporary Profile
To store a temporary profile as a new profile:
2. Enter a name and press r.
3. To base this profile on an existing profile, select
Copy From and then select a profile and press r. If
you do not choose a profile to copy from, the new
profile is based on a default profile.
1. Press / > Tools > Profiles.
4. Press Create (left softkey).
2. Highlight the temporary profile and press / >
5. Scroll through the list of options and set their
Store As New.
3. Enter a name and press r.
To overwrite the profile the temporary profile is based on:
1. Press / > Tools > Profiles.
2. Highlight the temporary profile, press
/ > Store Changes, and then press Yes
(left softkey).
Note
The temporary profile is stored with the name of the
profile it is based on. The profile it is based on, as it
existed before you made changes to settings, is
gone.
Creating Profiles
1. Press / > Tools > Profiles > [New Profile].
values.
6. When you are finished, press Done (right softkey).
Editing Profiles
1. Press / > Tools > Profiles.
2. Highlight a profile, press / and then select Edit.
3. Scroll through the list of options and set their
values.
4. When you are finished, press Done (right softkey).
Settings
Temporary profiles and any settings you have changed
are marked with asterisks (*).
Deleting Profiles
To delete a profile:
1. Press / > Tools > Profiles.
6. Settings
81
2. Highlight a profile, press /, and then select Delete.
3. Press r or press Yes (left softkey).
To delete all profiles:
1. Press /> Tools > Profiles.
2. Press / and then select Delete All.
3. Press r or press Yes (left softkey) to confirm.
Setting Call Filtering
The call filtering setting in each profile lets you control
which calls, Call Alerts, and message notifications your
phone notifies you of, and which it ignores.
1. While setting options for a profile, select Call Filter.
2. Select a filtering option
䡲
Phone – sets filtering options for phone calls.
●
Off – notifies you of all calls.
●
All – ignores all calls.
●
All Contacts – notifies you only of calls from
●
Some Contacts – notifies you only of calls from
Contacts.
selected Contacts. Select up to five Contacts
82
6. Settings
entries. When you are finished, press Done
(right softkey).
䡲 DC/GC – sets filtering options for Direct Connect
calls and Talkgroup calls.
● Off – notifies you of all DC and Talkgroup calls.
● On – ignores all DC and Talkgroup calls.
䡲 Group – sets filtering options for Group Connect
calls.
● Off – notifies you of all Group Connect calls.
● On – ignores all Group Connect calls.
䡲 Alerts – sets filtering options for Call Alerts.
● Off – notifies you of all Call Alerts.
● On – ignores all Call Alerts.
䡲 Notifications – sets filtering options for message
notifications.
● Off – notifies you of all messages.
● Voice Messages – ignores all voice messages.
● Text Messages – ignores text messages.
● All – ignores all messages.
The message notification screen still appears when
you receive a message you have set not to sound a
tone or vibrate.
3. Press Done (right softkey).
Phone Setup Options
Shortcuts
Your phone offers you the option of assigning shortcuts
to favorite or often-used functions. Pressing the / key
in standby mode followed by the assigned shortcut key
will launch your personally designated shortcuts.
Creating a Shortcut
Note
When you receive your phone, all number keys may
already be assigned to shortcuts. If this is the case,
you can create new shortcuts by deleting or
replacing existing shortcuts
1. Go to a menu item.
For example, to create a shortcut to the screen for
creating a new Contacts entry: Press / > Contacts
and then highlight [New Contact].
2. Press and hold / until a confirmation screen
appears.
3. Press r or press Yes (left softkey).
4. Press a number key for the shortcut and press r.
5. To record a voice name for the shortcut, select
Voice (optional). Follow the prompts to say and
repeat the name. Speak clearly into the
microphone.
6. Press Done (left softkey).
7. If the number key you select is already assigned to
a shortcut, a prompt appears asking to replace the
existing shortcut.
䡲 Press Yes (left softkey) to replace the existing
shortcut.
䡲 Press No (right softkey) to keep the existing
shortcut and assign another number key.
Settings
Note
Using a Shortcut
To access a shortcut using the shortcut number:
1. From standby mode, press /.
6. Settings
83
2. On your keypad, press the number assigned to the
shortcut.
To access a shortcut using the voice name:
To change the number or voice name assigned to a
shortcut:
1. Press and hold s.
1. Press / > Settings > Personalize > Shortcuts.
2. Say the voice name you assigned to the shortcut.
2. Highlight any shortcut and press Edit (left softkey).
The shortcut with that voice name is then
highlighted.
To view a list of your shortcuts:
䊳
Press / > Settings > Personalize > Shortcuts.
Editing a Shortcut
To change the order of shortcuts:
1. Press / > Settings > Personalize > Shortcuts.
2. With any shortcut highlighted, press / > Reorder.
3. Highlight the shortcut you are moving and press
Grab (left softkey).
4. Scroll to a new location and press Insert (left
softkey).
5. Repeat step 2 through step 4 for all the items you
are moving.
84
6. Press Done (right softkey).
6. Settings
3. With Key or Voice highlighted, press r to change
assignments.
4. Press Done (left softkey).
Deleting Shortcuts
To delete a shortcut:
1. Press / > Settings > Personalize > Shortcuts.
2. Highlight a shortcut and press / > Delete.
3. Press r or press Yes (left softkey) to confirm.
To delete all shortcuts:
1. Press / > Settings > Personalize > Shortcuts.
2. With any shortcut highlighted, press / > Delete All.
3. Press r or press Yes (left softkey) to confirm.
Carousel
Personalize
Carousel is an iconic list of application shortcuts
displayed horizontally at the bottom of the display in
standby mode that allows you to access a total of nine
applications.
In addition to Shortcuts, the Personalize menu gives
you other options to access menu items easily.
Configuring Auto Hide Settings
䊳
Press / > Settings > Personalize > Carousel >
Auto Hide.
䡲
Select from Off, 2 seconds, 4 seconds, or 8 seconds.
Note
Carousel will not time out if Off is selected.
Assigning Carousel Applications
䊳
Press / > Settings > Personalize, select an option,
and set your preferences.
䡲 Reorder Menu to change the main menu order.
䡲 Up Key, Down Key, Left Key, Right Key, Center Key, Left
Softkey, Right Softkey, to set one-touch menu
access from the standby screen.
䡲 Power Up to set the menu item displayed when
you power on your phone. (Default Ready starts in
standby mode.)
Call Answer Mode
Select how to answer incoming calls on your phone.
1. Press / > Settings > Personalize > Carousel.
1. Press / > Settings > Phone Calls.
2. Assign applications to Left 1, Left 2, Left 3, Left 4,
2. Select an option and press r.
Center, Right 1, Right 2, Right 3, and Right 4.
3. Press r to assign the applications.
䡲
Settings
To scroll through the list of icons, press the navigation
key right or left to highlight an icon, and press r to
select the icon.
Any Key Ans: Select On to allow you to answer an
incoming call by pressing any key.
– or –
6. Settings
85
Select Off to require you to press , to answer all
incoming calls.
䡲 Auto Ans to set your phone to automatically
answer an incoming call after a specified number
of rings when connected to a headset or
hands-free car kit.
● Off to disable Auto-Answer.
● 1 Ring, 2 Rings, 3 Rings or 4 Rings to answer calls
automatically when the phone is connected to
a hands-free car kit or a headset (sold
separately). In Auto-Answer mode, your
phone will answer calls even if you are not
present.
䡲 Slide Activation to set your phone to answer calls by
sliding the phone open (Slide to Ans) and end calls
by sliding the phone closed (Slide to End).
Setting Prepend Dialing
The Prepend feature lets you set a prefix to be added to
the beginning of all dialed numbers, such as a country
code for international calls.
1. Press / > Settings > Phone Calls > Prepend.
2. Select Prepend > On.
3. Enter a prefix in the Number field (such as +1 for
international calls) and then press r.
To deactivate this feature, select Off during step 2
above.
䡲
Note
This setting does not apply to 911 or Sprint 411.
Resetting Your Phone
Display Language
Resetting Phone Settings
You can choose to display your phone’s onscreen
menus in several languages.
Resetting phone settings restores all the factory
defaults, including the ringer types and display settings.
The Recent Calls, Scheduler, and all text Messages will
be erased, Contacts are not affected.
1. Press / > Settings > Display/Info > Language.
2. Highlight English, Español, Português, Français or
Automatic and press r.
86
6. Settings
1. Press / > Settings > Advanced > Reset Defaults >
Reset Settings.
press Ok (left softkey). (A disclaimer is displayed.)
Note
Your security code is a six-digit number used for
resetting your phone. Please contact Nextel
Customer Service if you do not know your security
code.
3. Read the prompt and press Yes (left softkey) to
complete the reset. (Press No [right softkey] to
cancel.)
GPS Privacy Options
Your phone’s GPS privacy options control whether Java
applications or other software applications on your
phone may view the location of your phone. You may
set your phone to one of these GPS privacy options.
Note
Privacy options do not apply to the transmission of
location information during emergency 911 calls.
To set your GPS privacy options:
Resetting All
1. Press / > Tools > GPS > Privacy.
Selecting Reset All resets phone settings and clears all
phone data, including Contacts, History, Scheduler, and
Messaging.
2. If your GPS PIN security feature is enabled, enter
1. Press / > Settings > Advanced > Reset Defaults >
Reset All.
2. Enter your security code and press Ok (left softkey).
3. Read the prompt and press Yes (left softkey) to
complete the reset. (Press No [right softkey] to
cancel.)
your GPS PIN. (See “Setting the GPS PIN Security
Feature” on page 88. for more information.)
3. Select a privacy option:
䡲
Restricted — No Java or similar software
applications may view the location of your phone.
However, location information may still be
available to the phone’s owner, fleet manager, or
account administrator.
䡲 Unrestricted — All applications may view the
location of your phone, without notifying you.
6. Settings
87
Settings
2. Enter your phone’s six-digit security code and
䡲
By Permission — When an application attempts to
view the location of your phone, you will be
prompted to give permission. However, location
information may still be available to the phone’s
owner, fleet manager, or account administrator.
Setting the GPS PIN Security Feature
To prevent your GPS privacy settings from being
altered without your knowledge, your GPS privacy
option can be protected by a PIN.
When you receive your phone, the GPS security feature
is turned off, so you do not have to enter a GPS PIN to
access your GPS privacy options. If you turn this
feature on, you will be required to enter a GPS PIN to
access your GPS privacy options.
To turn the GPS Enabled security feature on or off:
1. Press / > Settings > Security > GPS PIN.
2. Select On or Off.
3. Enter the current GPS PIN.
Tip
The default GPS PIN is 0000.
4. Press Ok (left softkey).
88
6. Settings
To change your GPS PIN:
1. Press / > Settings > Security > Change Passwords >
GPS PIN.
2. Enter the current GPS PIN and press Ok (left
softkey).
3. Enter the new GPS PIN and press Ok (left softkey).
4. Reenter the new GPS PIN to confirm and then
press Ok (left softkey).
Java Applications & GPS Security
Some Java applications can make use of your phone’s
GPS feature to determine the approximate
geographical location of your phone. (See “GPS
Enabled” on page 115 for more information on the GPS
feature.) However, for privacy reasons, you may not
always want Java applications to access the location of
your phone. Your phone protects your privacy by giving
you the option to block all or some Java applications
from accessing the location of your phone.
See “GPS Privacy Options” on page 87 for instructions
on setting the privacy options for your java applications.
These options control the privacy of all Java
applications on your phone.
Granting or Denying Permission
When a java application requests access to the
location of your phone, a screen appears informing
you.
To grant or deny a request:
1. Press Grant (left softkey) or Deny (right softkey) to
grant or deny a request.
2. Select Always to always take this action for the
application, For this session to keep this action
without notification until the phone is powered off,
or Only Once to take this action for this instance only
(you will be prompted again for subsequent
requests).
Setting Privacy for Each Java Application
1. Press / > Games and Apps.
2. Highlight an application or suite of applications.
Tip
If the application has requested access to the
location of your phone, this icon f appears when
you highlight the application.
3. Press / > Permissions.
4. Select privacy options for this application (you may
set them for each of the menus available under
Permissions):
䡲 Always — The application always has permission
to access the phone’s location without notification.
䡲 Ask — When the application requests access to
the phone’s location, you are prompted to grant
or deny permission (see “Granting or Denying
Permission” on page 89).
䡲 Never — Requests for location are denied without
notification.
6. Settings
89
Settings
Setting Privacy for All Java Applications
DC/GC Options Menu
The PTT Options menu controls how your phone
handles Direct Connect calls, Group Connect calls, and
Talkgroup calls.
䢇
added. Set Add Prefix to Ask Me to set your phone to
display a prompt asking you whether to add the
prefix as you save My Info from other phones to
Contacts.
PTT Backlight — controls whether or not the backlight
displays when using Direct Connect.
To access the DC/GC Options menu:
䊳
䢇
䢇
䢇
䢇
䢇
䢇
90
Press / > Push To Talk > PTT Options.
Security Settings
Tkgrp Silent — controls whether you hear your
Talkgroup calls.
Tkgrp Area — lets you define your Talkgroup area.
One Touch DC — sets One Touch Direct Connect.
Alert Type — controls how your phone notifies you
when you receive Direct Connect calls, Group
Connect calls and Talkgroup calls.
On/Off Settings — sets your phone’s ability to send and
receive pictures in Direct Connect calls. See “Starting
a Call by Sending a Picture” on page 34.
Store Received Info — lets you specify a prefix, such as
a country code for international calls, to be
automatically added to phone numbers you receive
in My Info from other phones, when you store the My
Info to Contacts. Select Prefix to enter the prefix to be
6. Settings
SIM Card Security
Important
Except for making emergency calls, your phone
does not function without the SIM card.
SIM Card’s PIN
You can protect access to your phone by using the SIM
card’s PIN (Personal Identification Number). When you
enable SIM PIN, you must enter the PIN each time you
power up the phone. You can change or disable the
SIM PIN.
Turning SIM PIN On and Off
1. Press / > Settings > Security > SIM PIN.
2. Select On or Off.
3. Enter the new SIM PIN and press Ok (left softkey).
3. Enter the current SIM PIN.
4. Reenter the new SIM PIN to confirm and then
4. Press Ok (left softkey).
Entering the PIN
1. Turn on your phone.
2. When the SIM PIN screen appears, enter your
SIM PIN and press Ok (left softkey).
Important
If you enter your PIN incorrectly three times, your
SIM card is blocked. See “Unblocking the PIN” on
page 91.
Changing the PIN
Note
SIM PIN must be turned on in order to access this
feature.
1. Press / > Settings > Security > Change Passwords >
SIM PIN.
2. Enter the current SIM PIN and press Ok (left
softkey).
press Ok (left softkey).
Unblocking the PIN
If you enter your PIN incorrectly three times, your SIM
card is blocked. To unblock your SIM card, you must
contact Nextel Customer Service to get a PIN Unblock
Code (PUK). Follow their instructions for unblocking
your SIM PIN.
Important
If you unsuccessfully enter the PUK code ten
times, your SIM card is permanently blocked and
must be replaced. If this happens, you get a
message to contact Nextel Customer Service.
Except for making emergency calls, your phone
does not function with a blocked SIM card.
Your Phone’s Lock Feature
Locking Your Phone
When your phone is locked, you can only make calls to
911. To lock and unlock your phone, you must enter
your phone’s four-digit lock code. If you do not know
6. Settings
91
Settings
Important
The default SIM PIN is 0000. Change your PIN to
prevent fraudulent use of the SIM Card.
your phone’s lock code, try 0000; if this does not work
contact Nextel Customer Service for assistance.
䊳
To call an emergency number, dial 911 and
press ,
1. Press / > Settings > Security.
Locking Your Keypad
2. Select Phone Lock > Lock Now, enter the unlock
When your phone is closed and in standby mode, your
keypad locks to prevent accidental key presses.
code, and press Ok (left softkey). (To set your
phone to lock the next time it is turned on, select
Auto Lock.)
䊳
To lock your keypad now, press / > Settings >
Security > Keypad Lock > Lock Now.
Unlocking Your Phone
䊳
䊳
At the “Enter Unlock Code” prompt, enter your
unlock code and press Ok (left softkey).
Changing the Lock Code
1. Press / > Settings > Security > Change Passwords.
To change how long your phone waits before it
automatically locks your keypad, press / >
Settings > Security > Keypad Lock > Auto Lock and
select a time interval of 2 seconds, 4 seconds,
8 seconds or Off.
Note
2. Select Unlock Code then enter your current unlock
code and press Ok (left softkey).
3. Enter and reenter your new lock code, pressing
Ok (left softkey) after each.
Calling in Lock Mode
You can place calls to 911 when in lock mode.
92
6. Settings
If the keypad setting is set to off, your keypad will
remain unlocked.
Unlocking Your Keypad
䊳
To unlock your keypad, press Unlock (right softkey)
and then press Yes (left softkey).
Note
Sliding your phone open will also unlock your phone.
7. Recent Calls
When you select a call to view its details, you see
information such as the name associated with the call,
the number, date, time, and duration of the call.
Note
⽧
⽧
⽧
⽧
⽧
⽧
About Recent Calls (page 93)
Viewing Recent Calls (page 95)
Recent Calls Options (page 95)
Saving Items From Recent Calls (page 96)
Deleting Items From Recent Calls (page 97)
Prepending a Number From Recent Calls (page 97)
About Recent Calls
The Recent Calls list displays the last 20 numbers (or
Contacts entries) for calls you placed, accepted, or
missed, and for Call Alerts you have received. It also
displays My Info and contact information sent to you
from other phones. It is continually updated as new
numbers are added to the beginning of the list and the
oldest entries are removed from the bottom of the list.
The Recent Calls list records only calls that occur
while the phone is turned on. If a call is received
while your phone is turned off, it will not be included
in the phone’s Recent Calls list.
If you return a call from the voicemail menu, it will not
be included in your phone’s Recent Calls list.
Calls and Call Alerts
If the number of a recent call is stored in Contacts, the
following information appears:
䢇 The name assigned to the number.
䢇 The Contacts type icon associated with the number.
If the item contains more than one number or
address stored,<>surrounds the Contacts type icon.
The Direct Connect number Contacts type icon
appears when you receive a Direct Connect call or Call
Alert, even if the number is not stored in Contacts.
7. Recent Calls
93
Recent Calls
Duplicate calls (same number and type of call) may
only appear once on the list.
Call Alerts you have received appear as Direct Connect
calls. Like all items in the Recent Calls list, they remain
listed until you delete them or until they reach the end
of the list.
For phone calls, an additional icon appears giving
information about the call.
-
A call you made.
1
A call you received.
#
A missed call. Missed calls appear on the
Recent Calls list only if you have Caller ID.
When you select a call to view its details, you see
information such as the name associated with the call,
the number, date, time, and duration of the call.
My Info From Other Phones
The Recent Calls list displays My Info sent from other
phones. See “Sending My Info and Contact
Information” on page 36.
This icon 3 appears with My Info sent from other
phones, along with the Direct Connect number of the
person who sent the information.
94
7. Recent Calls
When you select My Info from other phones to view its
details, you see all the information sent.
If you receive My Info from the same phone more than
once, only the most recently sent version appears in
the Recent Calls list.
Contact Information From Other Phones
The Recent Calls list displays contact information sent
from other phones. This information comes from the
other phone’s Contacts list or Recent Calls list. See
“Sending My Info and Contact Information” on
page 36.
This icon 2 appears with contact information on the
Recent Calls list.
Contact information in the Recent Calls list displays:
䢇 The name contained in the contact information.
䢇 The Contacts type icon associated with the number
or address contained in the contact information. If the
item contains more than one number or address
stored, <> surrounds the Contacts type icon.
The name or Direct Connect number of the person
who sent the contact information appears as a
When you select contact information to view its details,
you see the name or Direct Connect number of the
person who sent the information and all the information
in the item.
If you receive contact information with the same name
from the same phone more than once, only the most
recently sent version appears in the Recent Calls list.
Viewing Recent Calls
To view the Recent Calls list:
1. Press , or / > Recent Calls.
2. Scroll through the list.
To view the details of an item on the list:
䊳
From the Recent Calls list, highlight an entry and
press r.
Recent Calls Options
Select a Recent Calls entry and press r to display the
date and time of the call, the phone number (if
available), and the caller’s name (if the number is
already in your Contacts). Press / to display the
following options:
䢇 Use Push To... to select Send My Info or Send Contact
(Direct Connect or Calls Alerts only).
䢇 Send Contact to send the contact information to
another Direct Connect user.
䢇 Delete to delete the entry.
䢇 Delete All to delete all recent calls entries.
䢇 Add Prepend to prepend a number to the contact
number. See “Prepending a Number From Recent
Calls” on page 97.
䢇 Recent Calls View to select between List View or Picture
View.
䢇 Call Alert Queue to view the call alert list.
䢇 Call Setup to configure the call.
7. Recent Calls
95
Recent Calls
separate item on the Recent Calls list, above the
information sent. If one person sends you more than
one item of contact information, all the items appear
below the person’s name or Direct Connect number.
䢇
Call New Group to create a Group and place a Group
Connect call. (Direct Connect or Call Alerts only..
Tip
Press Create (left softkey) to begin a message to the
highlighted entry.
You can also view the next Recent Calls entry by
pressing the navigation key right or view the previous
entry by pressing the navigation key left.
Saving Items From Recent Calls
1. From Recent Calls, highlight or select an item.
2. Press Save (left softkey).
– or –
If Save is not one of your options, press / and
then select Save or Update Contacts.
Tip
96
If the item you are storing is a call, Save does not
appear if the number is already stored in Contacts.
7. Recent Calls
3. Select [New Contact] to store the number in a new
Contacts entry, or select an entry to store the
number to an existing entry.
Note
Storing My Info or contact information from another
phone to a Contacts entry that has a name assigned
to it does not change the name of the Contacts
entry.
4. If the item is a call, you must assign a Contacts
type to the number:
With the Contacts type field highlighted, scroll left
or right to display a Contacts type.
5. To add more information to the entry (optional),
follow the applicable instructions in “Creating
Contacts Entries” on page 99.
6. Press Save (left softkey).
Prepending a Number From Recent
Calls
To delete an item from the Recent Calls list:
1. From Recent Calls, highlight or select an item.
2. Press / > Delete.
3. Press r or press Yes (left softkey) to confirm.
To delete all items on the Recent calls list:
1. Press / > Recent Calls.
If you need to make a call from the Recent Calls List
and you are outside your local area code, you can add
the appropriate prefix by prepending the number.
1. Highlight or select a Recent Calls entry and press
/ > Add Prepend.
2. Enter the prefix and press , to call the number.
2. Press / > Delete All.
3. Press Yes (left softkey) to confirm. Press No (right
softkey) to cancel.
7. Recent Calls
97
Recent Calls
Deleting Items From Recent Calls
About Contacts
8. Contacts
⽧
⽧
⽧
⽧
⽧
⽧
⽧
⽧
⽧
98
About Contacts (page 98)
Creating Contacts Entries (page 99)
Viewing Contacts (page 101)
Adding a Number to an Entry (page 102)
Editing Entries (page 102)
Deleting Entries (page 103)
Assigning Speed Dial Numbers (page 103)
Selecting a Ringer Type for an Entry (page 104)
Assigning a Picture to an Entry (page 105)
8. Contacts
Contacts stores up to 1200 numbers or addresses.
Each Contacts entry can store several numbers or
addresses.
Information stored in Contacts is saved on your
SIM card.
A Contacts entry contains:
䢇 A name — A name is required if you are storing more
than one number or address to the entry; otherwise,
it is optional. Typically, this is the name of the person
whose contact information is stored in the entry.
䢇 A ring tone — You can assign a ring tone to each
entry. This is the sound your phone makes when you
receive phone calls or call alerts from any of the
numbers stored in the entry.
䢇 A Contacts type — Each number or address stored
must be assigned a Contacts type. (See “Types of
Contacts” on page 99.)
Creating Contacts Entries
Each number or address stored must be assigned a
Contacts type:
A
Mobile
phone number
0
DC
Direct Connect number
i
Work1
phone number
j
Work2
phone number
k
Home
phone number
l
Email
email address
n
Fax
phone number
o
Pager
phone number
r
Talkgroup
Talkgroup number
t
Group
Group
q
IP
IP address
p
Other
phone number
Each Contacts entry can store up to 10 numbers or
addresses, and an entry’s name can contain 20
characters.
Tip
ICE – In Case of Emergency
To make it easier for emergency personnel to identify
important contacts, you can list your local
emergency contacts under “ICE” in your phone’s
Contacts list. For example, if your mother is your
primary emergency contact, list her as “ICE–Mom” in
your Contacts list. To list more than one emergency
contact, use “ICE1–___,” “ICE2–___,” etc.
Contacts
Types of Contacts
A number or address and a Contacts type are required
for all Contacts entries. Other information is optional.
You may enter the information in any order by scrolling
through the entry details.
After you have entered the number or address,
Contacts type, and any other optional information,
press Save (left softkey) to save the entry to Contacts.
To cancel a Contacts entry at any time press Cancel
(right softkey) and then press Yes (left softkey) to return
8. Contacts
99
to the Contacts list or press . to return to standby
mode.
To create a Contacts entry:
1. Press / > Contacts > [New Contact].
2. To assign a name to the entry:
䡲
Select Name. Enter the name and press r.
3. To assign a ring tone or picture to the name
(optional):
Select Ring Tone/Picture, select a ring tone or
picture, and then press Back (right softkey).
䡲
4. To assign a Contacts type to the number or
address being stored:
Highlight the Contacts type field.
䡲 Scroll left or right to select a Contacts type (Mobile,
DC, Work1, Work2, Home, Email, Fax, Pager, Talkgroup,
Group, IP or Other).
䡲
5. To store a number or address:
Select the # field (or ID for an email address, or IP
for an IP address).
䡲 Enter the number or address. For phone
numbers, use the ten-digit format. For Direct
䡲
100
8. Contacts
Connect numbers, be sure to include the
asterisks (*).
䡲 For email addresses, see “Entering Text” on
page 15.
䡲 When you are finished, press r.
6. To assign more options to the number, including
Speed # and Voice Name, select [Options] and
proceed to steps 7-9. Otherwise, skip to step 10.
7. The default Speed Dial number assigned to a
phone number is displayed in the Speed # field.
This is always the next available Speed Dial
location. To assign the phone number to a different
Speed Dial location:
䡲 With the Speed # field highlighted, press r.
䡲 Press Delete (right softkey) to delete the current
Speed Dial number.
䡲 Enter the new Speed Dial number and press r.
8. To create a voice name for a number, select Voice
Name. Follow the prompts to record a name. Speak
clearly into the microphone.
9. When you are finished, press Back (right softkey).
Scroll past the information you already entered.
䡲 Enter the additional information for the entry using
steps 2–9. You must assign a name to the entry, if
you have not already.
䡲
11. Press Save (left softkey).
Creating Pauses and Waits
When storing a number, you can program your phone
to pause or wait between digits while dialing. A pause
makes your phone pause for three seconds before
dialing further. A wait makes your phone wait for your
response before dialing further.
This feature is useful when using voicemail or other
automated phone systems that require you to dial a
phone number and then enter an access number.
For details on using pauses and waits, see “Phone
Numbers With Pauses” on page 25.
Storing Numbers Faster
To store numbers to Contacts from standby mode:
1. Enter a phone number or Direct Connect number.
2. Press / > Store Number.
3. Select [New Contact] to store the number to a new
entry, or select an entry to store it to an existing
entry.
4. With the Contacts type field highlighted, scroll left
or right to select a Contacts type.
5. To add more information to the entry, follow the
applicable instructions in “Creating Contacts
Entries” on page 99.
6. Press Save (left softkey).
Contacts
10. To add more numbers or addresses to the entry:
Viewing Contacts
1. Press / > Contacts and then either highlight an
entry, enter the first letter of a name, or press
Search (left softkey), and enter a name. (Your
phone finds the name you entered or the nearest
match.)
2. If an entry has more than one number or address
stored, <> surrounds the Contacts type icon. Scroll
left or right to view the icon for each number stored
in the entry.
8. Contacts
101
3. Press r to display the entry, and then scroll up or
down to view all information stored for the entry.
Tip
To display the next or previous entry, scroll right or
left.
3. Highlight the number type field above an open
number and press the navigation key right or left to
select a number type.
4. Scroll down to the open field, enter the new
number or address and press r.
Filtering Contacts Entries
You can set Contacts to display only entries containing
Direct Connect numbers, Groups, and Talkgroups.
䊳
Press / > Contacts > / > Filter > Show DC. Select
Show All to display all Contacts entries.
Finding Speed Dial Numbers
䊳
Press / > Contacts, select an entry and select a
phone number. The speed dial number is listed
directly under the contact phone number.
Adding a Number to an Entry
1. Display a Contacts entry. (See “Viewing Contacts”
on page 101.)
2. Press Edit (left softkey) or / > Edit.
102
8. Contacts
5. Press Save (left softkey) to save the new number.
– or –
To assign a speed dial number or Voice Name,
select [Options] > Speed # or Voice Name. Complete
the process, press Back (right softkey) and then
press Save (left softkey) to save the entry.
Editing Entries
1. Press / > Contacts and highlight an entry.
2. Press Edit (left softkey) or / > Edit.
3. Follow the applicable instructions in “Creating
Contacts Entries” on page 99 to edit the entry.
1. Press / > Contacts and highlight an entry.
2. Press / > Delete Contact.
3. Press r or press Yes (left softkey) to confirm.
Deleting a Number or Address
1. Press / > Contacts and highlight an entry.
2. Scroll left or right to display the Contacts type to
delete.
3. Press / > Delete Number.
4. Press r and Yes (left softkey) to confirm.
Note
If an entry contains only one number or address,
deleting the number or address deletes the entry.
Assigning Speed Dial Numbers
Your phone can store up to 1200 phone numbers in
speed dial locations. (For details on how to make calls
using speed dial numbers, see “Speed Dialing” on
page 27.)
You can assign speed dial numbers when you add a
new Contacts entry, when you add a new phone
number to an existing entry, or when you edit an
existing number.
Contacts
Deleting Entries
To assign a speed dial number to a new phone number:
1. Add a phone number to a new or to an existing
Contacts entry. (See “Creating Contacts Entries” on
page 99 or “Adding a Number to an Entry” on
page 102.)
2. Highlight [Options], press r, and then select
Speed #.
3. Enter an available speed dial number and
press r.
4. Press Back (right softkey) and then press Save (left
softkey) to save the entry.
8. Contacts
103
To assign a speed dial number to an existing phone
number:
1. Press / > Contacts and then highlight an entry.
2. Press Edit (left softkey) or / > Edit.
3. Select [Options] below the number, and then select
Speed #.
4. Enter an available speed dial number and
press r.
5. Press Back (right softkey) and then press Save (left
softkey) to save the changes.
Note
104
If you attempt to assign an already in-use speed dial
location to a new phone number, a message will
appear asking if you wish to overwrite the existing
speed dial assignment. Press Yes (left softkey) to
assign the location to the new phone number and
delete the previous speed dial assignment.
8. Contacts
Selecting a Ringer Type for an Entry
Assign a ringer type to a Contacts entry so you can
identify the caller by the ringer type. (See “Ring Tones”
on page 70.)
1. Press / > Contacts and then highlight an entry.
2. Press Edit (left softkey) or / > Edit.
3. Select [Ringtone/Picture ] > Ringer.
4. Scroll through available ringers. (When you
highlight a ringer type, a sample ringer will sound.)
5. Press r to select a ringer.
6. Press Back (right softkey) and then press Save
(left softkey)to save the assigned ringer.
Assigning a Picture to an Entry
Assign a picture to display when you receive a call
from an entry.
1. Press / > Contacts and then highlight an entry.
2. Press Edit (left softkey) or / > Edit.
3. Select [Ringtone/Picture ] > Picture.
4. Scroll through available pictures and press r to
Contacts
select one. (Scroll left or right to browse pictures in
the phone’s memory or on the memory card.)
5. Press Back (right softkey) and then press Save
(left softkey).
8. Contacts
105
9. Tools
⽧
Datebook (page 106)
⽧
My Info (page 111)
⽧
Java Applications (page 112)
⽧
Digital Rights Management (DRM) (page 114)
⽧
GPS Enabled (page 115)
⽧
Memo Feature (page 119)
⽧
Voice Records (page 120)
⽧
Call Timers (page 122)
Datebook
Datebook stores up to 250 events. You can store events
over a thirteen month period — twelve months after and
one month before the current date.
A Datebook event contains:
䢇 A subject — A name or number you assign to the
event.
䢇 A location — The location of the event. This can also
be a phone number, Direct Connect number, or
Talkgroup.
䢇 A start time — The start time for the event. Default is
the beginning of the day.
䢇 A duration — The length of time the event lasts.
䢇 A date — The date for the event. Default is the day
highlighted when the event is created.
䢇 A repeat — For recurring events.
䢇 A reminder — A scheduled alert for events that
include a start time.
䢇 A ring tone for the reminder.
䢇 A profile that your phone uses during the event.
䢇 A Java application that starts when the event starts.
Only subject and date are required to save an event.
Viewing Datebook
䊳
106
9. Tools
Press / > Tools > Datebook.
To view an event:
1. Select the day the event occurs.
2. Select the event.
To change the current view:
䊳
While in Datebook, press / and select a view.
Note
Day view is the default setting.
Navigating Datebook
To scroll through Datebook:
䊳
Scroll left and right using the navigation key.
– or –
In week view and month view, press *or #.
To see more in day view:
䊳
Scroll up and down using the navigation key.
To highlight a day in month view:
䊳
Enter the date using the keypad.
To go to today’s date:
䊳
While in Datebook, press / > Go To Today.
To go to any date in Datebook:
1. While in Datebook, press / > Go To Date.
2. Select a date.
Creating Events
Every Datebook event must have a subject and be
stored to a date. Other information is optional.
After you have entered the information, press Done (left
softkey) to store the event to Datebook.
Tools
You can view Datebook by the day, by the week, or by
the month. You can also view the details of any event.
䢇 In day view, brief information about each event for
that day appears.
䢇 In week view, events appear as markers
corresponding to their times.
䢇 In month view, days with events are marked.
To create a Datebook event:
1. While in datebook, press New (left softkey).
– or –
In day view, select [New Event].
9. Tools
107
2. To assign a subject to the event, select Subject and:
䡲
Enter the name or enter a phone number, Direct
Connect number, or Talkgroup number.
– or –
Press Browse (left softkey) to choose from
common event names.
3. To assign a location to the event (optional), select
Location and enter the location or enter a phone
number, Direct Connect number, or Talkgroup
number.
4. The start time automatically assigned to an event is
the beginning of the day. To change the start time
or assign no start time, select Start and then enter a
start time or press No Time (left softkey).
5. To assign a duration, select Duration and select a
duration from the list or select Custom and enter a
duration.
6. The date automatically assigned to an event is the
date that was highlighted or selected when you
began creating the event. To change the date of
the event, select Date and then enter a date.
7. To make the event a recurring event:
Select Repeat and then select a repeat cycle.
● If the event occurs more than once a week,
select Multiple Day, and select the days.
● Press Done (left softkey).
䡲 In the End field, select a date for the event to stop
recurring.
䡲
8. To create a reminder for this event, select Reminder
and then select a reminder time or select Custom to
enter a reminder time.
Note
If an event has no start time, you cannot create a
reminder for it.
9. To set the ring tone for a reminder, select Ring Tone
and then select a ring tone.
10. To assign a profile for your phone to use during
the event, select Profile and then select a profile.
(Your phone switches to this profile when the event
starts and switches back to the previous profile
when the event ends.)
11. To assign a Java application to start when the
event starts, select App and then select an
108
9. Tools
12. Once you have entered all relevant information and
settings, press Done (left softkey).
To cancel without saving:
䊳
Press Cancel (right softkey).
Editing Events
To change the details of an event:
5. To change more information, follow the applicable
instructions in “Creating Events” on page 107 to
edit the event.
6. Press Done (left softkey) to store the event.
Deleting Events
1. Select the day the event occurs.
2. Select the event and press / > Delete.
3. If the event is not a recurring event, press r or
press Yes (left softkey) to confirm.
1. Select the day the event occurs.
– or –
2. Select the event and press Edit (left softkey).
If the event is a recurring event, select This Event
Only to delete only the event selected in step 2, or
select Repeat Event to delete all occurrences of the
3. Follow the applicable instructions in “Creating
Events” on page 107 to edit the event.
To copy an event to another date:
1. Select the day the event occurs.
2. Select the event and press / > Copy.
3. Press Yes (left softkey) to confirm.
event.
Receiving Reminders
If you created a reminder for a Datebook event, when
the reminder time occurs, your phone notifies you with
text on the display and a reminder tone.
Tools
application. (If you created a reminder for this
event, your phone prompts you to start the Java
application when you get the reminder.)
4. Enter a date and press r.
9. Tools
109
To view more details about the event:
䊳
Press View (left softkey).
To dismiss the reminder:
䊳
To make a phone call:
1. Highlight or select an event containing a phone
number.
Press Dismiss (right softkey).
For Events With Java Applications
If you assigned a Java application to start when the
event starts, you can start the application when you get
the reminder.
䊳
Making Calls From Datebook
Press / > Launch.
Making Calls From Datebook and
Datebook Reminders
If you stored a phone number, Direct Connect number,
or Talkgroup number in the Subject or Location field of a
Datebook event, you can call or send a Call Alert to that
number from Datebook or from the reminder.
If you store the same type of number (phone number
or DC/Talkgroup number) in both fields, the number in
Subject takes precedence.
2. Press , or press / > Call # in Event.
To make a Direct Connect call or Talkgroup call:
1. Highlight or select an event containing a Direct
Connect or Talk Group number.
2. Press the DC button. (If you did not include a #
before a Talkgroup, press / > Talkgroup, and then
press the DC button.)
To send a Call Alert:
1. Highlight or select an event containing a Direct
Connect number.
2. Press / > Alert # in Event, and then press the DC
button.
Making Calls From Datebook Reminders
To call a number:
䊳
110
9. Tools
Press , or press / and then select Call # in Event.
䊳
Press the DC button.
To send a Call Alert:
䊳
Press / > Alert # in Event, and then press the DC
button.
Customizing Datebook Setup
1. Select / > Tools > Datebook > / > Setup.
2. Select an option and adjust the values.
䡲
Options include Start View, Daily Begin, Delete After,
Time Shift, Alert Timeout and Clock.
My Info
My Info lets you view your phone number, Direct
Connect number, and other phone information.
䊳
Press / > Tools > My Info.
Note
䡲
Connect, Group ID (Talkgroup number), Carrier IP,
IP1 Address and IP2 Address.
Note
If you request equipment-related transactions on
your account, Nextel Customer Service may require
you to provide specific information about your
phone. Press / while in My Info to display a
submenu that includes your phone's service status,
unit information, and phone identification numbers
including IMEI, SIM ID, and Serial Number (SN).
Adding a Name to My Info
1. Press / > Tools > My Info.
2. Press Edit (left softkey) > Name.
3. Enter a name and press r.
You can also edit the information in Line 1 and Line 2,
but your changes are only temporary. The next time
your phone registers on the network, your actual phone
numbers appear again in My Info.
You may need to select More to display My Info.
Information displayed includes My Name (optional,
you may enter it yourself), Line 1 Line 2, Direct
9. Tools
111
Tools
To make Direct Connect calls or Talkgroup calls:
Java Applications
Suspending Applications
Installing Applications
When you suspend an application, it does not stop
running. It goes to the background so that you can run
another application in the foreground.
1. Press / > Games and Apps.
To suspend an application:
2. Select an application or suite of applications.
Messages appear as the application installs.
3. Press Done (left softkey).
Running Applications
1. Press / > Games and Apps.
2. Select an application or suite of applications. If you
have selected a suite of applications, select an
application.
Tip
If you do not hear the sounds associated with the
Java application, select Settings > Volume and
check the volumes of Speaker and Earpiece.
䊳
Press ..
To view your suspended applications:
䊳
Press / > Games and Apps > Suspended Apps.
You can have up to three applications running at one
time — one running in the foreground and two in the
background.
Resuming Applications
You can resume a suspended application at any time.
This brings it to the foreground.
To resume a suspended application:
1. Press / > Games and Apps > Suspended Apps.
2. Select an application to resume.
112
9. Tools
To end an application:
䊳
Press the appropriate softkey to end or exit the
application or press / > End.
To end an application from the Suspended Apps Screen:
1. Press Games and Apps > Suspended Apps.
2. Highlight an application and press End (left
softkey).
To end all applications:
1. Press / > Games and Apps > Suspended Apps >
/ > End All.
2. Press r or press Yes (left softkey) to confirm.
3. To end all applications without letting them exit,
press EndNow (left softkey) and then press Finish
(right softkey).
Downloading Applications
To run more Java applications, you can download
them into your phone.
To access a catalog of items available for purchase and
download:
䊳
Press / > Multimedia > Downloads.
You can also go to www.nextel.com and sign on to your
account to find a wide selection of available Java
applications and downloading instructions.
Deleting Applications
To delete an application:
1. Press / > Games and Apps.
2. Highlight an application and press / > Deinstall.
3. Press r or Yes (left softkey) to confirm.
4. When your phone has finished deleting the
application, press Done (left softkey).
To delete all Java applications:
1. Press / > Games and Apps.
Tools
Ending Applications
2. Highlight Java System and press / > Delete All.
(You may need to press More [left softkey] to
display Java System.)
3. Press r or press Yes (left softkey) to confirm.
9. Tools
113
Digital Rights Management (DRM)
When you download multimedia content available
online, such as Java applications, these items may be
subject to DRM restrictions. DRM, or digital rights
management, is a system that defines how copyrighted
multimedia content can be distributed and used.
DRM limits items to time-based or count-based usage
settings. Time-based settings let you use the given item
for a specified interval. Count-based settings let you
use an item for a specified number of times after you
download it or for unlimited use.
䢇
䢇
For count-based items, the number of credits (uses)
left or an unlimited use notice.
The name of the item’s vendor.
To view the license of a DRM item:
1. Go to the location that contains the item.
2. Highlight the item and press / > License Info.
Renewing DRM Licenses
Note
Managing Items
Depending on how the third-party vendor has set rights
for the given DRM item, you may be unable to perform
some of the following tasks.
Viewing License Information
You can check a DRM item’s license to view the
following information:
䢇 For time-based items, either the date and time the
item expires, or the number of days left.
114
9. Tools
Java application data is stored in your phone using
the same memory space used to store messages,
voice records, pictures, ring tones, and wallpaper
images. Deleting some of these other items frees
memory for Java applications.
1. Go to the location on your phone that contains the
item.
2. Highlight a DRM item and press Renew (left
softkey) or press / > Renew.
3. Select the link to the page where you purchased
the item and then follow the vendor’s instructions
for purchasing an additional license.
If you delete a DRM item that you purchased from
Nextel from your phone, you will have to purchase it
again to download it.
Note
You cannot delete items that are DRM locked.
Under certain conditions, third-party vendors will let
you download an item multiple times within a given
time frame, even if you deleted the item. Please
contact the third-party vendor of an item to learn
more about the vendor’s download regulations.
1. Highlight a DRM item and press / > Delete.
2. If prompted, press Yes (left softkey).
About Expired Items
Most items will continue to display on your phone until
you delete them. You can also choose to renew the
license for an expired item.
GPS Enabled
Your phone’s GPS Enabled feature uses information
from Global Positioning System (GPS) satellites orbiting
the Earth to determine the approximate geographical
location of your phone. The availability and accuracy of
this location information (and the amount of time that it
takes to calculate it) will vary depending on the
environment in which you are using the GPS feature.
When you make a 911 emergency call, the GPS feature
of your phone can help emergency personnel locate
you if your phone has adequate access to GPS satellite
signals and your emergency response center is
equipped to process such information.
You can also use the GPS feature to view your
approximate location. Location information appears on
the phone’s display.
Java applications loaded on your phone can also
request your location. If your phone is connected to a
laptop computer or similar device, software running on
that device can request your location. To protect your
privacy, you can control whether these requests are
granted. See “GPS Privacy Options” on page 87.
9. Tools
115
Tools
Deleting Items
IMPORTANT: Things to Keep in Mind
If you are using the GPS feature of your phone while
driving, please give full attention to driving and to the
road.
Where adequate signals from multiple satellites are not
available (usually because your GPS antenna cannot
establish a view of a wide area of open sky, such as in
underground locations, inside or between buildings, or
in dense tree cover), the GPS feature of your phone
WILL NOT WORK.
Walking or driving very slowly may also substantially
reduce GPS performance.
Making an Emergency Call
䊳
Dial 911 and press , to be connected to an
emergency response center. If you are on an active
call, you must end it before calling 911.
When you make an emergency 911 call, the GPS
feature of your phone begins to calculate your
approximate location. Even where your phone has
good access to sufficient GPS satellite signals and
network assist data, it may take 30 seconds or more to
116
9. Tools
determine the approximate location. This time will
increase where there is reduced access to satellite
signals. When your approximate location is
determined, it is made available to the appropriate
emergency response center.
In some cases, your local 911 emergency response
center may not be equipped to receive GPS location
information. For this reason, and because the GPS
location information reported is only approximate or
may not be available in your location, always report
your location to the 911 operator you speak to when
making an emergency call, if able, just as you would
when using a phone without GPS capabilities.
Note
If you are concerned about whether your local 911
emergency response center is equipped to receive
GPS location information, contact your local
authorities.
Viewing Your Approximate Location
䊳
Press / > Tools > GPS > Position.
This displays the following information about the last
time your location was calculated:
䢇
䢇
䢇
The time (as Greenwich Mean Time) and date that
the location was last calculated.
The approximate location, expressed as latitude and
longitude.
The estimated accuracy of the calculated location.
The number of satellites used to calculate the
location. In general, more satellites make for better
accuracy.
To calculate your location again:
䊳
Press Refresh (left softkey).
It may take your phone several minutes to complete the
process of determining your location, during which the
phone displays “Scanning For Satellites.”
The Position screen displays the updated information.
To cancel a location calculation before it is completed:
䊳
Press Cancel (right softkey) to return to the Position
screen or press . to return to standby mode.
Each time approximate location of your phone is
calculated, the latest location information is stored in
your phone. You will see this information the next time
you view the Position screen.
Enhancing GPS Performance
Sometimes the GPS feature of your phone may be
unable to complete a location calculation successfully.
To improve accuracy and increase your chances of a
successful calculation, do the following while your
phone is determining your approximate location:
䢇 Stay in the open. The GPS feature works best where
there is nothing between your phone and a large
amount of open sky. If possible, go outside, away
from tall buildings and foliage.
䢇 Hold your phone to enhance reception. Signals from GPS
satellites are transmitted to your GPS antenna, which
is in your phone antenna. Hold your phone away
from your body, giving the antenna clear access to
satellite signals. Do not cover the antenna area with
your fingers or anything else.
䢇 Stand still. If possible, stand still until your phone is
finished determining your location. Moving your
phone at a walking pace while your phone is
calculating your approximate location may
substantially decrease GPS performance.
䢇 In a car. When using the GPS Enabled feature in a car,
position your phone so that the GPS antenna has
9. Tools
117
Tools
䢇
good access to GPS signals through the car’s
windows. Typically, the GPS antenna has best access
to GPS signals in a car when placed near a window.
Note
䢇
Although moving your phone at a walking pace
decreases GPS performance, moving it at the speed
of a moving car does not.
Stay in network coverage. The network will provide your
phone with information that helps determine your
location more quickly and accurately.
Using GPS With Map Software
You can use the GPS feature of your phone to provide
approximate location data to a laptop computer or
similar device that is running interactive map software
such as that made by DeLorme or Microsoft. This way,
if your phone has good access to GPS signals, your
approximate position on a map can be made available
as you travel in a vehicle.
To do this, connect your phone to your laptop (or other
device) with a data cable and set your phone to
transmit data (see “To connect your phone to your
laptop or other device:” on page 118). Your phone then
provides your approximate location to the device
118
9. Tools
running the map software, which displays your location
on a map. Your phone provides an updated location
every second and the map software displays your
changing location on its map.
See “Enhancing GPS Performance” on page 117 for
more details on obtaining good location information.
Note
Because your phone is continuously determining
your location, using the GPS feature of your phone
with map software uses the phone’s battery power
quickly.
To connect your phone to your laptop or other device:
1. Pull open the connector cover.
2. With the phone’s display facing up, insert a
micro-USB data cable into the charger connector.
laptop or other device.
Make sure no other application is using the COM port
selected.
Make sure the COM port settings of your laptop or
other device are set to the following:
䢇 Bits per second: 4800
䢇 Data bits: 8
䢇 Parity: None
䢇 Stop bits: 1
䢇 Flow control: Hardware
To set your phone to send location information to your
laptop or other device:
1. Press / > Tools > GPS > Interface.
2. Set NMEA OUT to USB or Bluetooth.
Your phone is now sending location data to your
laptop or other device.
To stop sending location data to your laptop or other device:
䊳
Set NMEA OUT to Off.
Each time you power your phone on, NMEA OUT is
automatically set to Off.
Memo Feature
Memo lets you store a number, make a call to that
number, and save it to Contacts.
To create a memo:
1. Press / > Tools > Memo.
2. Enter a number and press r.
To view the memo later:
䊳
Press / > Tools > Memo.
To delete the memo:
1. Press / > Tools > Memo.
2. Press and hold Delete (left softkey) and then
press r.
Tools
3. Insert the data plug into the COM port of your
To edit the memo:
1. Press / > Tools > Memo.
9. Tools
119
2. Press and hold Delete (left softkey) to delete the
6. Press Save (left softkey).
number.
3. Enter the new number and press r.
Voice Records
To make a call to the memo number:
1. Press / > Tools > Memo.
2. To make a phone call, press ,. To make a Direct
Connect call, press the DC button.
To store the memo number to Contacts:
1. Press / > Tools > Memo.
2. Press / > Store to Contacts.
3. To store the number as a new entry, select
[New Contact].
– or –
To store the number to an existing entry, select the
entry.
4. With the Contacts type field highlighted, scroll left
A voice record is a recording you make with your
phone and can play back. You can record notes to
yourself or phone calls.
Your phone can store up to 20 voice records.
Creating Voice Records
1. Press / > Multimedia > VoiceRecord >
[New VoiceRec].
2. Recite a message into the microphone.
3. When you are finished recording, press r.
To record a phone call:
1. While on an active call, press / > Record.
2. When you are finished recording, press r.
or right to display a Contacts type for the number.
5. To add more information to the entry, follow the
applicable instructions in “Creating Contacts
Entries” on page 99.
120
9. Tools
Note
Recording of phone calls is subject to applicable
laws regarding privacy and recording of phone
conversations.
1. Press / > Multimedia > VoiceRecord.
2. Highlight a voice record and press r.
3. To stop the voice record while it is playing,
press r.
Tip
To fast forward, scroll right. To rewind, scroll left. To
pause or resume, press any number key.
Labeling Voice Records
When you create a voice record, it is labeled with the
time and date it was recorded. You can rename it with
a custom label.
1. Press / > VoiceRecord.
2. Highlight a record and press Label (left softkey).
3. Enter a label and press r.
Deleting Voice Records
To delete an unlocked voice record:
1. Press / > Multimedia > VoiceRecord.
2. Highlight a record and press / > Delete.
3. Press r or Yes (left softkey) to confirm.
To delete all unlocked voice records:
1. Press / > Multimedia > VoiceRecord.
2. Highlight a record and press / > Delete All.
3. Press r or Yes (left softkey) to confirm.
Locking Voice Records
When you lock a voice record, it cannot be deleted
until you unlock it.
1. Press / > Multimedia > VoiceRecord.
2. Highlight a record and press / > Lock to lock it.
Press / > UnLock to unlock a message.
When a voice record is locked, this icon X appears
next to it.
Managing Memory
To view the amount of memory available for voice records:
Tools
Playing Voice Records
1. Press / > Multimedia > VoiceRecord.
2. With [New VoiceRec] highlighted, press Memory (left
softkey).
9. Tools
121
Call Timers
To view or reset a timer:
1. Press / > Tools > Call Timers.
Call timers measure the duration of your phone calls,
Direct Connect, or Group Connect calls, and the
number of kilobytes sent and received by your phone:
䢇 Last Call — displays the duration of your most recent
phone call.
䢇 Phone Reset — keeps a running total of your phone
call minutes, until you reset it.
䢇 Phone Lifetime — displays the total minutes of all your
phone calls.
䢇 DC/GC Reset — keeps a running total of all of your
Direct Connect and Group Connect call minutes,
until you reset it
䢇 DC/GC Lifetime — displays the total minutes of all your
Direct Connect and Group Connect calls.
䢇 Kbytes Reset — keeps a running total of the number of
kilobytes sent and received by your phone, until you
reset it.
122
9. Tools
2. Select a timer and press r.
䡲
To reset the timer, press r (left softkey). Press
r or press Yes (left softkey) to confirm.
Note
The values displayed by Call Timers should not be
used for billing. Call times are estimates only.
10. microSD Card
1. Remove the battery cover. (See “Installing the
Battery” on page 10.)
2. Open the memory card slot cover, and slide in the
memory card until it clicks into place.
⽧
Using a microSD Card With Your Phone (page 123)
⽧
microSD Settings (page 126)
⽧
microSD Folders (page 127)
⽧
Connecting Your Phone to Your Computer (page 127)
microSD Card
Inserting the microSD Card
Using a microSD Card With Your
Phone
Using the microSD Card Slot
Your phone is equipped with a microSD (Secure
Digital) memory card slot to expand the phone’s
available memory space. It allows you to store images,
videos, music, and voice data in your phone.
10. microSD Card
123
Note
Be sure to use only recommended microSD cards.
Using non-recommended microSD cards could
cause data loss and damage your phone. Your
handset can be used with Transflash or microSD
memory cards.
3. Close the memory card slot cover and replace the
battery cover.
4. Your phone may prompt you to use the memory
card to store new media items, go to Music Player,
go to the Camera, go to the Media Center, or do
nothing. If you select [Do Nothing], you will return to
standby mode. Respond to the prompt now.
Removing the microSD Card
Do not remove the memory card until you select the
Remove Card option under Settings. Removing the
memory card before selecting the Remove Card option
could result in loss of data.
1. Press / > Settings > Memory Card > Remove Card.
2. Once the handset confirms that it is safe to remove
the microSD card, press OK (left softkey).
3. Remove the battery cover and open the memory
card slot cover.
124
10. microSD Card
pull the card out.
Using the microSD Adapter
microSD Card
4. Grasp the raised edge of the microSD card and
The supplied microSD adapter allows microSD cards
to be used in SD-compatible devices such as digital
cameras, printers, and computers. Before using, you
will need to insert the microSD card into the microSD
adapter.
To insert the microSD card into the microSD adapter:
䊳
Note
With the label side of the microSD card facing up,
insert the card into the supplied microSD adapter,
and gently slide the card until it is fully inserted.
The microSD card and its adapter can be easily
damaged by improper operation. Please be careful
when inserting, removing, or handling them.
5. Close the memory card slot cover and replace the
battery cover.
10. microSD Card
125
To remove the microSD card from the microSD adapter:
䊳
Hold the front edge of the microSD card, and
gently pull outward to remove it from the adapter.
Tip
If your computer has an SD card slot or if you have
an SD card adapter, you can use the microSD card
and adapter to transfer files such as audio files,
pictures, and videos directly between your computer
and your microSD card.
When you insert the card into your computer, select
Open folder to view files using Windows Explorer (or
a similar option) and drag and drop files using the
available folders.
microSD Settings
Viewing Memory in the microSD Card
1. With the microSD card inserted, press / >
Multimedia > Media Center > / > Memory Usage.
2. The following information will be displayed:
126
䡲
Used displays the amount of used memory space.
䡲
Free displays the amount of free memory space.
10. microSD Card
䡲
Capacity displays the capacity of the memory card.
䡲
Card Files displays the number of files in the card.
Setting Storage Options
You can set your phone to store pictures, videos,
music, and audio recordings on an inserted microSD
card instead of in the phone’s memory (when
available).
1. With the microSD card inserted, press / >
Settings > Memory Card > Store Media.
2. To store pictures, videos, music, and audio
recordings on the memory card, select
Perfer On Card.
Formatting the microSD Card
Formatting a microSD card permanently removes all
files stored on the card.
1. With the microSD card inserted, press / > Settings
> Memory Card.
2. Select Format Card and press r. (A warning will be
displayed.)
your microSD card, press Yes (left softkey).
WARNING
The formatting procedure erases all the data
on the microSD card, after which the files
CANNOT be retrieved. To prevent the loss of
important data, please check the contents
before you format the card.
microSD Folders
Displaying Your microSD Folders
All the files stored in the appropriate folders on the
microSD card are accessible through the Media
Center.
1. With the microSD card inserted, press / >
Multimedia > Media Center.
2. Press the navigation key left or right to display a
Card folder (All, Pictures, Audio, or Video) and
press r.
3. To view or play a file, select it and press r or the
appropriate softkey.
Note
microSD Card
3. If you are sure you wish to remove all the files from
The Media Center only recognizes compatible files
stored in the card’s AUDIO, VIDEO, and IMAGE
folders.
Connecting Your Phone to Your
Computer
Before using your phone’s mass storage capabilities,
you need to prepare your phone’s data services to
synchronize with your desktop or laptop computer.
Once the phone is connected to the computer, you can
transfer your data to or from the microSD card.
1. With the microSD card inserted, press / >
Settings > Connections > USB.
2. Highlight Memory Card Access and press r.
Note
To allow applications to access you phone,
press / > Settings > Connections > USB >
Application Access.
10. microSD Card
127
3. Connect your phone to your computer using a
compatible USB cable. (Wait for the connection to
be completed. When connected, the host
computer will automatically detect your phone.)
To remove the connection:
䊳
When you have finished transferring data, click the
USB device icon on your computer’s taskbar, and
follow the onscreen instructions to safely unplug
the USB cable.
Important Connection Information
䢇
䢇
䢇
128
No driver installation is required for Windows 2000/
ME/XP/Vista users. If you use Windows 98/98SE, you
have to download and install the USB Mass Storage
Driver from the Nextel website at www.nextel.com.
To avoid loss of data, DO NOT remove the USB
cable, the microSD card, or the battery while files are
being accessed or transferred.
DO NOT use your computer to change or edit folder
or file names on the microSD, and do not attempt to
transfer large amounts of data from the computer to
the microSD card. Doing so may cause the microSD
card to fail.
10. microSD Card
䢇
䢇
DO NOT turn off or restart your computer, or put it
into standby mode, while using a mass storage
device. Doing so will result in loss or damage of data.
If you connect a mass storage device to a peripheral
device, your device may not work properly.
2. Using the display screen as a viewfinder, aim the
camera lens at your subject.
11. Camera
3. Press Capture (left softkey) or r or until the shutter
sounds.
Press Send (left softkey) to send the picture in an
MMS message, Discard (right softkey) to discard
the picture and return to the camera, r to save
the picture and return to camera, or press / for
the following options:
● Send Picture vi... to send pictures to recent call
or contact.
● Send Via... to send the picture via Direct Send
(PTT), Bluetooth, or Messaging (MMS).
● Save [OK] to save the picture.
● Set As Caller ID to assign the picture to a
contact. Select a contact and press r.
● Set As Wallpaper to use the picture as your
phone’s wallpaper.
● Media Center to save the picture to the Media
Center and open the Media Center.
● Remove Card to enable the memory card
removal.
⽧
Taking Pictures (page 129)
⽧
Camera Options (page 130)
⽧
Recording Videos (page 131)
⽧
Storing Pictures and Videos (page 133)
Taking Pictures
Taking pictures with your phone’s built-in camera is as
simple as choosing a subject, pointing the lens, and
pressing a button.
1. With the slide open, press / > Multimedia > Camera
to activate camera mode.
Note
The camera is located on the back of the slide.You
will be prompted to open the slide to activate the
camera.
11. Camera
Camera
䡲
129
●
●
●
Memory Usage to see the amount of used and
available memory on your phone.
Memory Card to access the memory card
menu.
Camera Setup to set the camera default settings
for Ask for Name, Shutter Sound, Default Size,
Default Quality and GPS Tag.
Camera Options
With the phone in camera mode, press / to display
additional camera options:
䢇 Media Center to go to the Media Center to review your
saved pictures.
䢇 Record Video to switch to video mode. (See
“Recording Videos” on page 131 for details.)
䢇 Zoom to zoom in on a subject. (See “Using the
Zoom” on page 131 for details.)
䢇 Remove Card to safely remove the memory card.
䢇 Self Timer to activate the camera’s timer. (See “Setting
the Self Timer” on page 130 for details.)
䢇 GPS Tag the option to turn GPS Tag on or off.
130
11. Camera
䢇
Picture Quality to select the picture quality between
Normal or Fine.
䢇
Picture Size to select the picture size.
䢇
White Balance to select a white balance setting.
䢇
Exposure Control to adjust the exposure.
䢇
Style to set the picture effect.
䢇
Memory Usage to verify memory usage.
䢇
Memory Card to access the memory card menu.
䢇
Camera Setup to set the camera default settings.
Setting the Self Timer
1. From camera mode, press / > Self Timer.
2. Highlight a delay length (10 seconds, 15 seconds or
20 seconds) and press r.
3. Press Capture (left softkey) or r when you are
ready to start the timer. (The lower portion of the
display screen displays the countdown time.)
4. Get ready. The camera will automatically capture
the picture when the timer runs down.
䊳
Press Cancel (right softkey).
Using the Zoom
Depending on your resolution settings, you can adjust
the zoom from 1x to 4x.
To adjust the zoom:
Default Quality: Highlight Normal or Fine and
press r.
䡲 GPS Tag: If this option is On, pictures will be tagged
the geographic location of where they were taken.
䡲
Recording Videos
1. While in camera mode, press / > Zoom.
In addition to taking pictures, you can also record, view,
and send videos with the phone’s video camera.
2. Select from 1X, 2X or 4X.
To record a video:
Camera Setup
Set your camera’s resolution and default size in the
Camera Setup menu.
1. Press / > Multimedia > Camera > / >
Camera Setup.
2. Select an option and press r.
䡲
Ask for Name: Select On for the camera to prompt
you to enter a new file name when saving a
picture.
䡲 Shutter Sound: Select an option and press r.
䡲 Default Size: Select a size and press r.
1. Press / > Multimedia > Camcorder to activate video
mode. (Additional video options are available
through the video mode Options menu. See
“Video Mode Options” on page 132 for more
information.)
Camera
To cancel the self-timer after it has started:
2. Using the display screen as a viewfinder, aim the
lens at your subject.
3. Press Record (left softkey) or r to begin recording.
4. Press r or Stop (left softkey) to stop recording.
11. Camera
131
䡲
To return to camcorder mode to take another
video, press r to save or Discard (right softkey) to
delete the video.
5. Press / for more options:
䢇
Remove Card to enable the memory card removal.
䢇
Video Size to select the video size.
䢇
Video Length to select the video length.
Messaging (MMS).
䡲
Save [OK] to save the video.
䡲
Media Center to go to the Media Center to review
your saved videos.
䡲 Remove Card to enable the memory card removal.
䡲 Memory Usage to verify memory usage.
䡲 Camera Setup to set the camera default settings.
Video Mode Options
With the phone in video mode, press / to display
additional options:
䢇 Media Center to go to the Media Center to review your
saved videos.
䢇 Capture Picture to switch to picture mode.
䢇 Zoom to zoom in on a subject.
132
11. Camera
Short (for messages) restricts the lenght of the video
to a size that can be sent via messaging.
䡲 Maximum lets you take as long a video as
available memory space allow.
Memory Usage to verify memory usage.
Memory Card to access the memory card menu.
Camera Setup to set the camcorder default settings.
䡲
Review to play back the video.
䡲 Send Via... to send the video via Bluetooth or
䡲
䢇
䢇
䢇
Selecting Video Settings
1. From video mode, press / > Camera Setup.
2. Select an option and press r:
Ask for Name: Select On for the camcorder to
prompt you to enter a new file name when saving
a video file.
䡲 Shutter Sound: Select an option and press r.
䡲 Default Video Size: to set a video’s default size.
䡲
Storing Pictures and Videos
Card Folder
Your phone’s pictures, video, and audio recordings
storage area is called the Media Center. There are two
types of folders in the Media Center: Phone and Card.
You can save pictures and videos directly to the
microSD card. Several pictures can be stored and
managed in each folder on the microSD card,
depending on its capacity.
Setting Storage Options
To review your pictures and videos on the microSD card:
1. Press / > Settings > Memory Card > Store Media.
1. Press / > Multimedia > Media Center.
2. Select On Phone or Prefer on Card.
2. Use the navigation keys to select Card: All and view
Your phone’s internal storage area is called the Phone
folder. From the Phone folder, you can view all the
pictures and videos you have stored there, send items
(via Direct Send, Bluetooth, or messaging), delete files,
and access additional options.
To review your stored pictures and videos in the phone:
1. Press / > Multimedia > Media Center.
2. Use the navigation keys to select Phone: All and
view saved pictures and videos.
saved pictures and videos.
Camera
Phone Folder
Phone Folder and Card Folder Options
When you are highlighting a picture or video file in the
phone or microSD card folders, press / to display the
following options:
䢇 Delete to delete the selected file.
䢇 Lock to lock the selected file.
䢇 Rename to rename the selected file.
䢇 Send Via... to send the file via Direct Send, Bluetooth,
or Messaging.
䢇 Camera to activate Camera mode.
䢇 Remove Card to enable the memory card removal.
11. Camera
133
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
134
Set As Caller ID to display the currently highlighted
picture for incoming calls from a specific Contacts
entry. Select an entry and press r.
Set As Wallpaper to display the currently highlighted
picture as a wallpaper. Select Internal Display, External
Display, or Both and press r.
Copy To Card/Phone to copy the file from the current
folder to the other.
Move To Card/Phone to move the file from the current
folder to the other.
Delete All to delete all files in the folder.
Filter to select the media type to view from Phone: All,
Phone: Pictures, Phone: Audio, Phone: Video, Card: All,
Card: Pictures, Card: Audio, and Card: Video.
Set View to switch the display from Plain List View to
Thumbnail List View.
Memory Usage to verify memory usage.
Memory Card to go to the memory card menu.
11. Camera
䢇
Edit to display the following options (pictures only):
䡲
Crop to crop the selected picture.
䡲
Rotate/Flip to rotate or flip the selected picture.
Color Adjustments to select a color setting for the
picture.
䡲 Resize to resize the picture.
䡲 Borders to add a border to the picture.
䡲 Stamps to add a stamp to the picture.
䡲 Text to add text to the picture.
䡲 Text Bubble to add a text bubble to the picture.
Setup to Sort files (By Time or By Name), and to turn
Remember Filter on or off.
䡲
䢇
To turn Bluetooth on:
12. Bluetooth
1. Press / >Tools > Bluetooth > Setup > Power.
2. Select On and press r to enable Bluetooth.
To turn Bluetooth off:
1. Press / > Tools > Bluetooth > Setup > Power.
Turning Bluetooth On and Off (page 135)
⽧
Bluetooth Menu (page 136)
⽧
Connecting Bluetooth Devices (page 136)
⽧
Sending Items via Bluetooth (page 138)
Turning Bluetooth On and Off
Bluetooth is a short-range communications technology
that allows you to connect wirelessly to a number of
Bluetooth devices, such as headsets and hands-free
car kits, and Bluetooth-enabled handhelds, computers,
printers, and wireless phones. The Bluetooth
communication range is usually up to approximately
30 feet. By default, your device’s Bluetooth feature is
turned off. Turning Bluetooth on makes your phone
“discoverable” by other in-range Bluetooth devices.
2. Select Off and press r to disable Bluetooth.
To turn discoverable mode on:
䊳
Press / > Tools > Bluetooth > Setup >
Find Me Duration.
For the duration selected under Find Me Duration,
the phone will be discoverable by other devices
that are within range.
Bluetooth Status Indicators
The Bluetooth status indicators on your phone’s display
screen shows your Bluetooth connection status at a
glance:
Status Indicator – Bluetooth is disabled (default status)
Bluetooth
⽧
B – Status indicator will blink when the phone is in
discovery mode.
12. Bluetooth
135
B – Status indicator will be solid when connected to a
Bluetooth device.
Connecting Bluetooth Devices
Bluetooth Menu
Pairing and Connecting
1. Press / > Tools > Bluetooth > Audio Devices >
The Bluetooth menu allows you to set up many of the
characteristics of your phone’s Bluetooth service.
1. Press / > Tools > Bluetooth.
2. Set your Bluetooth options.
Select Audio Devices to discover and connect to
hands-free devices.
䡲 Select Pair to Devices to scan for and pair your
phone to an available Bluetooth device.
䡲 Select Device History to link to devices that have
been connected to your phone.
䡲 Select Setup to turn Bluetooth on and off, rename
your phone for Bluetooth, and set the time for the
Find Me command listed below.
䡲 Select Find Me to make your phone discoverable
to Bluetooth devices for a period of time.
䡲
136
12. Bluetooth
[Look for Devices] to connect to a hands-free device.
– or –
Press / > Tools > Bluetooth > Pair to Devices to pair
with a device. (Your phone will display a list of
discovered in-range Bluetooth devices.)
2. Highlight a device and press r.
3. Follow the prompts, including entering a PIN if
requested, and press r to complete the
connection.
Pairing uses a PIN to establish a trusted connection
between your phone and another Bluetooth device.
This PIN is stored for future connections.
Due to different specifications and features of other
Bluetooth-compatible devices, display and
operations may be different, and functions such as
transfer or exchange may not be possible with all
Bluetooth-compatible devices.
Connecting to a Stored Device
If you have previously connected to a device, the
device will be stored on your phone so you can
connect with it easily.
1. Press / > Tools > Bluetooth > Audio Devices and
then select a device.
2. If prompted to bond with the device, press Yes (left
softkey).
3. If prompted, enter the Bluetooth PIN and press Ok
(left softkey). Your phone will connect to the device.
Using Bluetooth During a Call
During a call, you can connect with available Bluetooth
devices.
Note
If the Hands Free menu contains only one device,
then your phone will automatically try to connect to
that device.
To use Bluetooth during a call:
1. While in a call, press / > Use Bluetooth.
2. Select a device.
Disconnecting From a Device
1. Press / > Tools > Bluetooth > Audio Devices.
2. Press Drop (left softkey) and then press Yes (left
softkey).
Note
Pressing No (right softkey) when prompted exits the
menu without disconnecting the device.
Understanding Bluetooth Access Settings
A Bluetooth device can have either Automatic or Ask
security access. The first time a Bluetooth device
connects to your Motorola Debut i856 phone, you must
grant the device permission to connect. You can then
change the access setting of the device to either
Automatic or Ask.
If you set a device to Automatic, that device can connect
automatically to your phone when it is in range. If you
set a device to Ask, that device must request
permission before it can connect to your phone.
12. Bluetooth
Bluetooth
Note
137
Devices are automatically granted permission during
the ten seconds after connecting.
Sending Items via Bluetooth
The default for hands-free devices, such as Bluetooth
headsets, is Automatic.
Sending Contacts, Datebook Events and
Media Center Items
Setting Device Details
The device history stores a list of up to 20 devices that
have connected with your phone.
䊳
Press / > Tools > Bluetooth > Device History.
From the device history, highlight a device and press
Edit (left softkey) to edit the device name and change
the access settings. To delete a device, highlight it,
press / > Delete, and then press Yes (left softkey).
Note
If you delete a device from device history, you will
have to find the device to connect with it. (See
“Pairing and Connecting” on page 136.)
Bluetooth lets you send Contacts entries, Datebook
events, and compatible Media Center items to
connected devices.
Files sent or received may be up to10 MB.
You can only connect your phone to one device at a
time.
Note
Go to www.nextel.com and click on Accessories for
a list of Motorola Debut i856 phone Bluetoothcompatible devices.
Sending Contacts
1. Press / > Contacts.
2. Highlight a contact and press / > Send Via... >
Bluetooth.
3. Select a device or search for a device by selecting
[Look for Devices].
138
12. Bluetooth
2. Highlight a file and press / > Send Via... >
connects to the device and transfers the contact.
Sending Datebook Events
1. Press / > Tools > Datebook.
Bluetooth.
3. Select a device or search for a device by selecting
[Look for Devices].
4. If prompted, bond with the device. Your phone
2. Highlight an event and press / > Send Via....
䡲
For a repeating event, select This Event Only to send
only this occurrence or Repeat Event to send all
instances.
3. Select Bluetooth.
4. Select a device or search for a device by selecting
[Look for Devices].
5. If prompted, bond with the device. Your phone
connects to the device and transfers the event.
Sending Media Center Items
You can only send audio files and pictures if they are
not forward locked and if their DRM settings do not
prevent you from sending them.
connects to the device and transfers the file.
Receiving Items
You receive a prompt when your phone has an
incoming transfer.
䊳
Press Accept (left softkey) to accept the transfer or
press Reject (right softkey) to reject the transfer.
Note
Media files transferred from a PC may be copied to
your microSD card’s root directory and may not be
accessible by your phone. To check the location,
connect your phone to your computer as a USB
mass storage device and move the files to the
appropriate folders.
1. Press / > Multimedia > Media Center.
12. Bluetooth
Bluetooth
4. If prompted, bond with the device. Your phone
139
Canceling Transfers
Viewing and Storing Received Items
You can cancel a transfer while in progress.
After an incoming transfer is complete, your phone
translates the item and it appears on the display.
1. Press Cancel (right softkey).
2. Press Yes (left softkey) to cancel, or press No (right
softkey) to continue with the transfer.
140
12. Bluetooth
You can choose to either store or discard the item.
Items are stored as follows:
䢇 Contact entries are stored to Contacts.
䢇 Pictures and audio files are stored to their folders and
are accessible through the Media Center.
䢇 Datebook events are stored to Datebook.
䊳
To store an item, press Store (left softkey).
䊳
To discard an item without saving it, press
Discard (right softkey).
⽧
Media Center (page 141)
⽧
My Music (page 145)
⽧
My Images (page 153)
⽧
My Videos (page 154)
Media Center
The Media Center provides convenient access to all
supported multimedia files on your device or your
memory card.
Note
The Media Center cannot read the Music and
Podcast folder from the microSD card.
All pictures stored in your phone’s memory can be
accessed through the Media Center.
Multimedia
13. Multimedia
The following audio recordings can be accessed
through the Media Center:
䢇 Voice records created when your phone was not in
a call.
䢇 Musical ringtones in the list of ringtones.
䢇 Audio files saved from MMS messages.
䢇 Audio files (songs, recordings, podcasts) you
downloaded to your phone.
Pictures and audio files accessible through the Media
Center can be sent in MMS messages, subject to
message size limitations. See “Creating and Sending
Messages” on page 50 for information on MMS.
Viewing the Media Center
1. Press / > Multimedia > Media Center.
2. Scroll to view the items in the Media Center.
Choosing Thumbnail View or List View
1. Press / > Multimedia > Media Center > / > Set View.
2. Select Thumbnail List View or Plain List View.
13. Multimedia
141
Filtering by Media Type
䊳
Press / > Multimedia > Media Center > / > Filter
and select a filtering option: Phone: All, Phone:
Pictures, Phone: Audio, Phone: Video, Card: All, Card:
Pictures, Card: Audio, or Card: Video
Keeping the Last Filter Setting
You can set the Media Center to show all items every
time you access it or to keep the filtering setting you
had when you last viewed it.
䊳
Press / > Multimedia > Media Center > / > Setup >
Remember Filter > On.
Sorting by Time or Name
1. Press / > Multimedia > Media Center > / > Setup >
Sort.
2. Select By Time to sort by the time items were
created or By Name to sort alphabetically.
When you receive your phone, the Media Center is set
to sort items by time.
Forward Locked Items
Some items saved to the Media Center may be forward
locked. Forward locked items are usually copyright
protected, and they cannot be sent or shared.
When you receive your phone, the Media Center is set
to show all items every time you access it.
You cannot remove forward locking from an item.
Accessing Items
When you view items in the Media Center, one of these
icons appears next to each forward locked item:
1. Press / > Multimedia > Media Center.
2. Highlight an item and press r to select it.
3. Scroll right or left to access additional items.
142
13. Multimedia
u
Forward locked.
v
Forward lock and locked.
DRM Items
Except for Java applications, which download to Java
Apps, the default location for any DRM items that you
download is the Media Center.
Depending on how a vendor has set rights for an item,
the item may include the following status icons.
k
The item is a DRM item.
l
The DRM item has expired.
All DRM items are forward locked. As with other items
in the Media Center, you can lock DRM items. See
“Locking Items” on page 143.
Renaming Items
1. Press / > Multimedia > Media Center.
2. Highlight or select an item and then press / >
Rename.
3. Delete the current name, enter a new name, and
press r.
Multimedia
When an item is locked, it cannot be deleted from the
Media Center. See “Locking Items” on page 143.
Locking an item has no effect on its forward locking.
Locking Items
When you lock an item in the Media Center, it cannot
be deleted until you unlock it.
1. Press / > Multimedia > Media Center.
2. Highlight or select an item and then press / >
Lock or Unlock to lock or unlock the item.
Deleting Items
Deleting items from the Media Center means they can
no longer be accessed anywhere in your phone,
including the list of ringtones, the list of voice records,
and Contacts.
Deleting an Item
1. Press / > Multimedia > Media Center.
2. Highlight or select an item and then press / >
Delete.
3. Press Yes (left softkey) to confirm.
13. Multimedia
143
Deleting All Items
Pictures
You can delete all unlocked items currently in view,
depending on how Media Center filtering is set. See
“Filtering by Media Type” on page 142. If filtering is set
to show all types of Media Center items, all unlocked
items are deleted.
The Media Center lets you view pictures and send
them in MMS messages, with Nextel Direct Send, or
with Bluetooth. You can also assign them to Contacts
entries or set them as your phone’s wallpaper.
1. Press / > Multimedia > Media Center.
2. Press / and then select Delete All.
3. Press Yes (left softkey) to confirm.
Tip
If you delete items you have purchased and
downloaded, including DRM items, you will usually
have to repurchase the item if you decide you want it
back. Certain DRM vendors may not charge you to
download an item multiple times within a given time
frame. Please contact the vendor for details.
Viewing Memory Usage
1. Press / > Multimedia > Media Center.
2. Highlight or select any item in the Media Center.
3. Press / > Memory Usage.
To free memory, delete items.
144
13. Multimedia
Viewing Pictures
䊳
To view a picture, highlight it from the list of items
in the Media Center and press r.
If your phone is set to show thumbnails, a thumbnail of
each picture appears next to the picture in the list of
items. If your phone is not set to show thumbnails, this
icon a appears next to the picture.
To see a larger or smaller view of the picture you are
viewing:
䊳
Press / > Zoom and select a setting.
If the picture does not fit in the display, use the
navigation key to view different parts of the picture.
1. Highlight or select a picture and then press Send
(left softkey) or press / > Send Via... > Messaging.
2. Select a device or search for a device by selecting
[Look for Devices].
3. If prompted, bond with the device. Your phone
connects to the device and transfers the picture.
2. Create and send the message. (See “Creating and
Sending Messages” on page 50.) The picture you
selected is automatically attached.
Sending Pictures With Direct Send
1. Highlight or select a picture and press / >
Send Via... > Direct Send.
2. Select A Contact or A Recent Call and select an
available recipient.
3. Press the DC button to send the picture.
Sending Pictures With Bluetooth
You must set up your phone to send items
using Bluetooth before you can send a picture.
See “12. Bluetooth” on page 135.
1. Highlight or select a picture and press / >
Send Via... > Bluetooth.
Multimedia
Sending Pictures in a Message
Setting Pictures as Wallpaper
䊳
Highlight or select a picture and press / >
Set As Wallpaper.
My Music
My Music groups your audio files into folders and lists.
When you select an audio file to play, My Music plays
the file and then plays the other audio files grouped
with it.
In addition to music, My Music plays podcasts that you
have downloaded to your computer and then saved on
your memory card.
If you receive calls or notifications while playing an
audio file with My Music, the audio file pauses and a
prompt asks you to accept or ignore the incoming call
or alert.
13. Multimedia
145
Accessing My Music
1. Press the Music key ([) to launch the My Music
player.
2. Press the navigation key up or down to select your
music.
䢇
䢇
䢇
䢇
3. Use the lighted navigations keys (Pause/Play [X],
Next/Fast Forward [*], Previous/Rewind [)]) to control
My Music.
Note
You can also access My Music through the main
menu. Press / > Multimedia > My Music or press
/ > Games and Apps > My Music.
Exiting My Music
䊳
To exit My Music, press Exit (right softkey). (If Exit is
not an option, press Back [right softkey] until it is.)
How Audio Files Are Organized
My Music groups audio files on the memory card into
folders and lists. Unless the phone determines a file is
a podcast, it treats all audio files as songs.
When you access My Music, you see that the audio
files are grouped into these folders:
146
13. Multimedia
䢇
䢇
䢇
Songs — All audio files on the memory card (except
podcasts), listed alphabetically by title.
Playlists — Folders and lists you have created. The
default playlist is Favorites.
Albums — Songs grouped by album title.
Artists — Songs grouped by alphabetically by artist
and title.
Genres — Songs grouped by genre.
Podcasts — Podcast episodes grouped alphabetically
by program. Episodes are sorted by date.
Other — Other songs group alphabetically.
If there is not enough album, artist, or genre data
associated with a file, it is grouped as “Unknown”.
Naming Audio Files
File names can include up to 255 characters, including
the file format extension (for example, mp3). Only the
first 32 characters will be displayed. If a file name is
longer than 255 characters, it will not be visible on the
player and cannot be played. In this case, you will need
to rename the file and resave it to the memory card.
Note
Audio File Formats: My Music does not support all
audio file formats or bit rates/sampling rates.
Supported extensions include .3ga, .3gp, .aac, .amr,
.au, .awb, .imy, .m4a, .mid, .midi, .mmf, .mp3, .mp4,
.mpga, .mxmf, .ra, .ram, .rm, .smf, .wav, .wma, .xmf,
.xmf0, and .xmf1.
[X] to play it, or highlight a folder and press Play
(left softkey) or press [X] to play the first audio file
in the folder.
Any time you are viewing a list of folders with My Music,
you can highlight a folder and press Play (left softkey) or
press [X] to start playing the contents of that folder or
press r to view the contents of the folder.
2. Highlight a folder.
Any time you are viewing a list of audio files, you can
highlight a file and press Play (left softkey) or [X] to play
it.
Tip
Press Back (right softkey) to return to the previous view.
1. Press [.
The Songs folder contains all the audio files, except
podcasts, on the memory card in a single list.
To quickly navigate through lists, enter the first letter
of a file or folder to skip to the entries beginning with
that letter.
3. To play the first audio file in the folder, press Play
(left softkey). (If the folder you scrolled to contains
subfolders, this plays the first audio file in the first of
these subfolders.)
– or –
Press r to view the contents of the folder. Then
highlight a file and press Play (left softkey) or press
Pause and Resume
䊳
To pause a playing audio file, press Pause (left
softkey), or press [X].
䊳
To resume playing a paused audio file, press Play
(left softkey) or press [X].
Skip to Next and Skip to Previous
䊳
To skip to the next audio file, press [*] (the right
side of the navigation key).
13. Multimedia
147
Multimedia
Playing Audio Files
䊳
To skip to the previous audio file, press [)] (the left
side of the navigation key).
Fast-Forward and Rewind
䊳
To fast-forward a playing audio file, press and hold
[*] (the right side of the navigation key).
䊳
To rewind a playing audio file, press [)] (the left
side of the navigation key).
Adjusting the Volume
䊳
To adjust the volume, use the volume button.
Playing Music in the Background
Your phone can continue to play music in the
background while you are accessing other features.
To play music in the background:
䊳
With music playing, press / > Hide Player.
The music player continues playing and the display
returns to standby mode. To return to the music player,
press Music (right softkey).
148
13. Multimedia
Playing a List and Using Repeat and Shuffle
You can play audio files in a selected list in order
(default), you can select the Repeat option to have a list
or song repeat automatically, or you can select the
Shuffle option to have the files play continuously in
random order.
To set repeat:
1. While viewing a list, viewing audio file details, or
viewing visuals, press / > Setup.
2. Highlight Repeat and then press the navigation key
right or left to select an option:
All to repeat the list from the beginning.
䡲 One to repeat the current song.
䡲 Off to turn repeat off.
䡲
3. Press Back (right softkey) to return to the previous
screen.
To set shuffle:
1. While viewing a list, viewing audio file details, or
viewing visuals, press / > Setup.
2. Highlight Shuffle and then press the navigation key
2. Enter a name and press r.
right or left to select On or Off.
screen.
DRM Items
Some of the audio files on the memory card may be
DRM (digital rights management) items. When a DRM
items has expired, you can no longer play it.
If you highlight an audio file that is expired and try to
play it, a message saying you cannot play it appears. If
you play a list containing an expired audio file, My
Music skips over the expired item and no message is
displayed.
Working With Playlists
Playlists let you group audio files that you’d like to hear
together. Adding or removing songs from playlists, or
deleting entire playlists, does not copy, move, or delete
files from your memory card.
Creating a Playlist
1. Press [ > Playlists > [Create New] > Name.
Note
If you do not assign a name, the playlist is named
“Playlist” followed by the number of unnamed
playlists you have. For example, the first unnamed
playlist you create will be named “Playlist-1”.
Multimedia
3. Press Back (right softkey) to return to the previous
3. Select [Add Songs]. (You will see a list of available
audio files.)
4. Select each audio file for the playlist. A checkmark
appears next to each selected file.
5. When you are finished selecting files, press Done
(left softkey).
6. Press Save (left softkey).
Editing a Playlist
After you have created a playlist, you can change its
name, add audio files, remove audio files, and change
the order of the audio files.
1. Press [ > Playlists.
2. Highlight a playlist and press / > Edit Playlist.
3. Make your changes and press Save (left softkey).
13. Multimedia
149
Reordering a Playlist
You can change the order of the audio files on a
playlist.
1. Before you have saved a new playlist or while
editing a playlist, press / > Reorder Songs.
2. Highlight a title and press Grab (left softkey).
3. Highlight a new location and press Insert (left
softkey).
3. Press Save (left softkey).
To remove all files from a playlist:
1. Before you have saved a new playlist or while
editing a playlist, press / > Remove All Songs.
2. Press r or Yes (left softkey) to confirm.
3. Add new songs to the playlist and then press Save
(left softkey).
Note
Empty playlists cannot be saved.
4. Repeat steps 2 and 3 for all the items you are
moving.
5. Press Done (right softkey) and then press Save (left
softkey).
Removing Files From Playlists
You can remove some or all audio files from a playlist.
To remove a file from a playlist:
1. Before you have saved a new playlist or while
editing a playlist, press /.
2. Highlight an audio file and press / >
Remove Song.
150
13. Multimedia
Deleting Playlists
To delete a playlist:
1. Press [ > Playlists.
2. Highlight a playlist and press / > Delete Playlist.
3. Press Yes (left softkey) to confirm.
To delete all playlists:
1. Press [ > Playlists.
2. Press / > Delete All Playlists.
3. Press Yes (left softkey) to confirm.
Podcasts
Using the Favorites Playlist
To access and play podcasts:
The Favorites playlist is a permanent playlist. You can
add, remove, and change the order of the files, but you
cannot rename it or delete it.
You can add audio files to the Favorites playlist as you
would any other playlist.
You can also add audio files to the Favorites playlist
using the Add to Favorites shortcut.
To add the current audio file to Favorites:
䊳
While viewing a list, viewing the details of the audio
file currently playing, or viewing visuals, press / >
Add to Favorites.
Multimedia
This deletes all playlists except Favorites.
1. Press [ > Podcasts.
2. Scroll to view individual podcast episodes or
folders containing multiple episodes of the same
program.
3. Press r to view the podcast episodes within a
folder or the details screen of an individual
podcast episode.
4. To play a selected podcast, press Play (left softkey).
Deleting Audio Files
1. Press [ > Songs.
You can delete audio files from the memory card one
at a time, by album, by artist, or by genre, or by deleting
everything in the Songs, Albums, Artists, or Genres
folders.
2. Highlight a file and press / > Add to Favorites.
Deleting an Audio File
To add any audio file to Favorites:
1. Press [.
2. Select the folder containing the audio file.
13. Multimedia
151
3. Highlight the audio file and press / > Delete Song
or Delete Podcast.
4. Press Yes (left softkey) to confirm.
Deleting an Album, Artist, or Genre
1. Press [.
2. Select the folder containing the audio files: Albums,
Artists, or Genres.
3. Highlight an album, artist, or genre, and press / >
Delete Album, Delete Artist, or Delete Genre.
4. Press Yes (left softkey) to confirm.
Deleting All Audio Files
Deleting everything in the Songs, Albums, Artists, or
Genres folder deletes all audio files from the memory
card.
1. Press [ > Songs, Albums, Artists, or Genres.
2. Press / > Delete Songs > / > All.
3. Press r or Yes (left softkey) to confirm.
Deleting All Podcasts
1. Press [ > Podcasts > / > Delete Podcasts.
2. Press r or Yes (left softkey) to confirm.
Setting Audio and Visual Options
You can customize the sound of My Music by setting
the equalizer. You can customize the look of My Music
screen by choosing a theme or by viewing visuals
while listening to an audio file.
Setting the Equalizer
1. From anywhere in My Music, press / > Setup >
Equalizer.
2. Select a mode and press Back (right softkey).
Viewing Visuals
To view visuals instead of song details:
1. While viewing the details of the audio file currently
playing, press / > Setup > Visuals, and use the
navigation key to select an option.
2. Press Back (right softkey).
152
13. Multimedia
1. While viewing visuals press / > Setup >
Visuals > Off.
2. Press Back (right softkey).
䢇
Preview displays the highlighted image.
䢇
Send Via Bluetooth lets you send image via Bluetooth.
䢇
Rename lets you rename the image.
䢇
Delete Current deletes the highlighted image.
䢇
Delete Multiple lets you choose multiple images to
delete at one time.
Switch to Phone/Card toggles between images stored
on the phone or memory card.
Set as wallpaper sets the highlighted image as the
phone’s wallpaper.
Set As Caller ID sets the highlighted image as the caller
ID for a contact.
My Images
䢇
The My Images application lets you easily browse, edit
and view a slideshow of images on your phone or
memory card on your internal display, or browse, view
a slideshow on the external display.
My Images Menu
The My Images menu has many image management
features. The following options are available for existing
images by pressing / > Multimedia > My Images > /.
䢇 Edit displays several options for editing your photos
including: Crop, Rotate/Flip, Color Adjustment,
Resize, Borders, Stamps, Text, and Text Bubble.
䢇 Slideshow starts a slideshow containing images from
the currently highlighted image.
䢇 Save as New lets you save an image with a new name.
䢇
䢇
Multimedia
To view song details instead of visuals:
Viewing Images
1. Press / > Multimedia > My Images or press / >
Games and Apps > My Images.
2. Press / > Slideshow to view a show of all images
in the current folder.
3. Press the navigation key left or right to scroll
through the images.
13. Multimedia
153
Editing Images
My Images has several options for editing your photos
including: Crop, Rotate/Flip, Color Adjustments, Resize,
Borders, Stamps, Text, and Text Bubble.
䊳
Viewing Videos
䊳
Press / > Multimedia > My Images > / > Edit and
follow the prompts to edit the picture.
My Videos
The My Videos application lets you easily browse and
view video files on your phone or memory card.
䊳
Press / > Multimedia > My Videos or press / >
Games and Apps > My Videos.
Note
154
Video File Formats: My Videos does not support all
video file formats or resolutions and bit/frame rates.
Supported extensions include .3gp, .asf, .mp4, .rm,
.rmvb, .mpg, and .wmv.
13. Multimedia
From the My Videos display, highlight a video and
press Pause/Play (X) to begin playback.
䡲 My Videos will display the video in portrait mode
by default.
䡲 To change the default to landscape mode press
/ > Full Screen.
䡲 When viewing a video, use the Pause/Play (X)
button to control the video playback. Press and
hold the Next/Fast Forward (*) button to fast
forward the video.
䡲 Press and hold the Previous/Rewind ()) button to
rewind the video.
My Videos Setup Menu
䊳
Press / > Multimedia > My Videos > / > Setup.
The My Videos Setup Menu allows you to change
settings for View, 3D Audio and Reverbs.
Safety and Warranty
Information
S1. Important Safety
Information
⽧
General Precautions (page 156)
⽧
Maintaining Safe Use of and Access to Your Phone
(page 157)
⽧
Battery Use and Safety (page 160)
⽧
Using Your Phone With a Hearing Aid Device (page 163)
⽧
Caring for the Environment by Recycling (page 164)
⽧
Export Law Assurances (page 164)
⽧
California Perchlorate Label (page 165)
⽧
Radio Frequency (RF) Energy (page 165)
⽧
Owner’s Record (page 168)
⽧
Patent and Trademark Information (page 169)
⽧
Software Copyright Notice (page 169)
⽧
Privacy and Data Security (page 170)
⽧
Smart Practices While Driving (page 170)
156
S1. Important Safety Information
Failure to read and follow the information provided in this phone
guide may result in serious bodily injury, death, or property
damage.
General Precautions
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
䢇 To maximize performance, do not touch the bottom portion
of your phone where the internal antenna is located while
using the phone.
䢇 Speak directly into the mouthpiece.
䢇 Avoid exposing your phone and accessories to rain or liquid
spills. If your phone does get wet, immediately turn the
power off and remove the battery.
䢇 Do not expose your phone to direct sunlight for extended
periods of time (such as on the dashboard of a car).
䢇 Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting,
bending, or sitting on it.
䢇 Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment and void your authority to operate this
equipment.
Note
For the best care of your phone, only authorized personnel
should service your phone and accessories. Failure to do
so may be dangerous and void your warranty.
Do Not Rely on Your Phone for Emergency Calls
Mobile phones operate using radio signals, which cannot
guarantee connection in all conditions. Therefore you should
never rely solely upon any mobile phone for essential
communication (e.g., medical emergencies). Emergency calls
may not be possible on all cellular networks or when certain
network services or mobile phone features are in use. Check
with your local service provider for details.
Using Your Phone While Driving
Talking on your phone while driving (or operating the phone
without a hands-free device) is prohibited in some jurisdictions.
Laws vary as to specific restrictions. Remember that safety
always comes first.
Responsible driving practices can be found in “Smart Practices
While Driving” on page 170 and/or at the Motorola website:
www.motorola.com/callsmart.
Tip
Purchase an optional hands-free accessory at your local
Sprint Store, or call Nextel at 1-866-866-7509.
Following Safety Guidelines
To operate your phone safely and efficiently, always follow any
special regulations in a given area. Turn your phone off in areas
where use is forbidden or when it may cause interference or
danger.
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, RF signals from wireless
phones may affect inadequately shielded electronic
equipment.
RF signals may affect improperly installed or inadequately
shielded electronic operating systems or entertainment
systems in motor vehicles. Check with the manufacturer or their
representative to determine if these systems are adequately
shielded from external RF signals. Also check with the
manufacturer regarding any equipment that has been added to
your vehicle.
Consult the manufacturer of any personal medical devices,
such as pacemakers and hearing aids, to determine if they are
adequately shielded from external RF signals.
Operational Precautions
Note
Always turn off the phone in healthcare facilities, and
request permission before using the phone near medical
equipment.
Important Safety Information
Maintaining Safe Use of and Access
to Your Phone
To assure optimal radio product performance and to be sure
that human exposure to RF does not exceed the guidelines set
forth in the relevant standards, always follow these instructions
and precautions:
S1. Important Safety Information
157
Phone Operation
When placing or receiving a phone call, hold your radio
product as you would a wireline telephone. Speak directly into
the microphone.
Two-way Radio Operation
Your radio product has been designed and tested to comply
with national and international standards and guidelines
regarding human exposure to RF electromagnetic energy,
when operated in the two-way mode (at the face, or at the
abdomen when using an audio accessory) at usage factors of
up to 50% talk/50% listen.
Transmit no more than the rated duty factor of 50% of the time.
To transmit (talk), push the PTT button. To receive calls, release
the PTT button. Transmitting 50% of the time or less, is
important because this radio generates measurable RF energy
only when transmitting (in terms of measuring for standards
compliance).
When using your radio product as a traditional
two-way radio, hold the radio product in a
vertical position with the microphone one to
two inches (2.5 to 5 cm) away from the lips.
If you wear a radio product on your body when
transmitting, always place the radio product in
a Motorola approved clip, holder, holster, case
or body harness. If you do not use a body-worn accessory
supplied or approved by Motorola and are not using the radio
product in the intended use positions along side the head in
the phone mode or in front of the face in the two-way radio
mode, or if you hang your device from a lanyard around your
158
S1. Important Safety Information
neck, keep the device at least 2.5 centimeters (1 inch) from
your body when transmitting.
Approved Accessories
For a list of approved Motorola accessories call 1-800-453-0920, or
visit our website at www.motorola.com/phoneaccessories.
Turning Off Your Phone Before Flying
Turn off your phone before boarding any aircraft. To prevent
possible interference with aircraft systems, the U.S. Federal
Aviation Administration (FAA) regulations require you to have
permission from a crew member to use your phone while
the plane is on the ground. To prevent any risk of interference,
FCC regulations prohibit using your phone while the plane is in
the air.
Turning Off Your Phone in Dangerous Areas
To avoid interfering with blasting operations, turn your phone
off when in a blasting area or in other areas with signs
indicating two-way radios should be turned off. Construction
crews often use remote-control RF devices to set off explosives.
Turn your phone off when you’re in any area that has a
potentially explosive atmosphere. Although it’s rare, your phone
and accessories could generate sparks. Sparks can cause an
explosion or fire, resulting in bodily injury or even death. These
areas are often, but not always, clearly marked. They include:
䡲 Fueling areas such as gas stations.
䡲 Below deck on boats.
䡲 Fuel or chemical transfer or storage facilities.
Note
Never transport or store flammable gas, flammable liquids,
or explosives in the compartment of your vehicle that
contains your phone or accessories.
Keep Your Mobile Device and Its Accessories Away From
Small Children
These products are not toys and may be hazardous to children.
For example:
䢇 A choking hazard may exist for small, detachable parts.
䢇 Improper use could result in loud sounds, possibly causing
hearing injury.
䢇 Improperly handled batteries could overheat and cause a
burn.
Do not allow children to play with your phone as they could
hurt themselves and others, damage the phone or make calls
that increase your invoice.
Glass Parts
Some parts of your phone may be made of glass. This glass
could break if the product is dropped on a hard surface or
receives a substantial impact. If glass breaks, do not touch or
attempt to remove. Stop using your phone until the glass is
replaced by a qualified service center.
Seizures/Blackouts
Some people may be susceptible to epileptic seizures or
blackouts when exposed to flashing lights, such as when
playing video games. These may occur even if a person has
never had a previous seizure or blackout.
If you have experienced seizures or blackouts, or if you have a
family history of such occurrences, please consult with your
physician before playing video games or enabling a flashinglights feature (if available) on your phone.
Discontinue use and consult a physician if any of the following
symptoms occur: convulsion, eye or muscle twitching, loss of
awareness, involuntary movements, or disorientation. It is
always a good idea to hold the screen away from your eyes,
leave the lights on in the room, take a 15-minute break every
hour, and stop use if you are very tired.
Caution About High Volume Usage
WARNING
Exposure to loud noise from any source for
extended periods of time may affect your hearing.
The louder the volume sound level, the less time is
required before your hearing could be affected.
Important Safety Information
Areas where the air contains chemicals or particles such
as grain, dust, or metal powders.
䡲 Any other area where you would normally be advised to
turn off your vehicle’s engine.
䡲
To protect your hearing:
䢇 Limit the amount of time you use headsets or headphones at
high volume.
䢇 Avoid turning up the volume to block out noisy surroundings.
S1. Important Safety Information
159
Turn the volume down if you can’t hear people speaking
near you.
If you experience hearing discomfort, including the sensation of
pressure or fullness in your ears, ringing in your ears, or
muffled speech, you should stop listening to the device through
your headset or headphones and have your hearing checked.
For more information about hearing, see our website at
direct.motorola.com/hellomoto/nss/AcousticSafety.asp (in
English only).
䢇
DON’Ts
䢇
䢇
䢇
Repetitive Motion
When you repetitively perform actions such as pressing keys or
entering finger-written characters, you may experience
occasional discomfort in your hands, arms, shoulders, neck, or
other parts of your body. If you continue to have discomfort
during or after such use, stop use and see a physician.
䢇
Battery Use and Safety
Important
160
HANDLE AND STORE BATTERIES PROPERLY TO
AVOID INJURY OR DAMAGE. Most battery issues
arise from improper handling of batteries, and
particularly from the continued use of damaged
batteries.
S1. Important Safety Information
Don’t disassemble, crush, puncture, shred, or otherwise
attempt to change the form of your battery.
Don’t let the phone or battery come in contact with water.
Water can get into the phone’s circuits, leading to corrosion.
If the phone and/or battery get wet, have them checked by
your carrier or contact Motorola, even if they appear to be
working properly.
Don’t allow the battery to touch metal objects. If metal objects,
such as jewelry, stay in prolonged contact with the battery
contact points, the battery could become very hot.
Don’t place your battery near a heat source. Excessive heat
can damage the phone or the battery. High temperatures
can cause the battery to swell, leak, or malfunction.
Therefore:
䡲 Do not dry a wet or damp battery with an appliance or
heat source, such as a hair dryer or microwave oven.
䡲 Avoid leaving your phone in your car in high
temperatures.
DOs
䢇
䢇
Do avoid dropping the battery or phone. Dropping these
items, especially on a hard surface, can potentially cause
damage.
Do contact your service provider or Motorola if your phone or
battery has been damaged from dropping or high
temperatures.
USE MOTOROLA ORIGINAL PRODUCTS FOR
QUALITY ASSURANCE AND SAFEGUARDS. To
aid consumers in identifying authentic Motorola
batteries from non-original or counterfeit batteries
(that may not have adequate safety protection),
Motorola provides holograms on its batteries.
Consumers should confirm that any battery they
purchase has a “Motorola Original” hologram.
Motorola recommends you always use Motorola-branded
batteries and chargers. Motorola mobile devices are designed
to work with Motorola batteries. If you see a message on your
display such as Invalid Battery or Unable to Charge, take the
following steps:
䢇 Remove the battery and inspect it to confirm that it has a
“Motorola Original” hologram;
䢇 If there is no hologram, the battery is not a Motorola battery;
䢇 If there is a hologram, replace the battery and retry charging it;
䢇 If the message remains, contact a Motorola Authorized
Service Center.
Important
WARNING
Motorola’s warranty does not cover damage to the
phone caused by non-Motorola batteries and/or
chargers.
Use of a non-Motorola battery or charger may
present a risk of fire, explosion, leakage, or other
hazard.
Proper and Safe Battery Disposal and Recycling
Proper battery disposal is not only important for safety, it
benefits the environment. Consumers may recycle their used
batteries in many retail or service provider locations. Additional
information on proper disposal and recycling may be found on
the Web:
䢇 www.motorola.com/recycling
䢇 www.rbrc.org/call2recycle/ (in English only)
Disposal of Lithium Ion (LiIon) Batteries: Promptly
dispose of used batteries in accordance with local
regulations. Contact your local recycling center or
national recycling organizations for more information
on how to dispose of batteries.
Do not handle a damaged or leaking Li-Ion battery as you can
be burned.
WARNING
Never dispose of batteries in a fire because they
may explode.
Special Note: Be sure to dispose of your battery properly. In
some areas, the disposal of batteries in household or business
trash may be prohibited.
Important Safety Information
Important
Protecting Your Battery
The guidelines listed below help you get the most out of your
battery’s performance.
䢇 Recently there have been some public reports of wireless
phone batteries overheating, catching fire, or exploding. It
appears that many, if not all, of these reports involve
S1. Important Safety Information
161
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
162
counterfeit or inexpensive, aftermarket-brand batteries with
unknown or questionable manufacturing standards. Nextel is
not aware of similar problems with Nextel phones resulting
from the proper use of batteries and accessories approved
by Nextel or the manufacturer of your phone. Use only
Nextel-approved or manufacturer-approved batteries and
accessories found at Sprint Stores or through your phone’s
manufacturer, or call 1-866-866-7509 to order. They’re also
available at www.nextel.com — click Accessories. Buying the
right batteries and accessories is the best way to ensure
they’re genuine and safe.
In order to avoid damage, charge the battery only in
temperatures that range from 32° F to 113° F (0° C to 45° C).
Don’t use the battery charger in direct sunlight or in high
humidity areas, such as the bathroom.
Never dispose of the battery by incineration.
Keep the metal contacts on top of the battery clean.
Don’t attempt to disassemble or short-circuit the battery.
The battery may need recharging if it has not been used for
a long period of time.
It’s best to replace the battery when it no longer provides
acceptable performance. It can be recharged hundreds of
times before it needs replacing.
Don’t store the battery in high temperature areas for long
periods of time. It’s best to follow these storage rules:
Less than one month:
-4° F to 140° F (-20° C to 60° C)
More than one month:
-4° F to 113° F (-20° C to 45° C)
S1. Important Safety Information
Batteries and Chargers
Your battery, charger, or portable radio may contain symbols,
defined as follows:
Symbol
032374o
032376o
032375o
Definition
Important safety information follows.
Do not dispose of your battery or
phone in a fire.
Your battery or phone may require
recycling in accordance with local
laws. Contact your local regulatory
authorities for more information.
Do not throw your battery or phone
in the trash.
Li Ion BATT
032378o
Your phone contains an internal
lithium ion battery.
Do not let your battery, charger, or
phone get wet.
Listening at full volume to music or
voice through a headset may
damage your hearing.
A number of Nextel phones have been tested for hearing aid
device compatibility. When some wireless phones are used
with certain hearing devices (including hearing aids and
cochlear implants), users may detect a noise which can
interfere with the effectiveness of the hearing device.
Some hearing devices are more immune than others to this
interference noise, and phones also vary in the amount of
interference noise they may generate. ANSI standard C63.19
was developed to provide a standardized means of measuring
both wireless phone and hearing devices to determine usability
rating categories for both.
Ratings have been developed for mobile phones to assist
hearing device users find phones that may be compatible with
their hearing device. Not all phones have been rated for
compatibility with hearing devices. Phones that have been
rated have a label with the rating(s) located on the box, and are
listed at www.motorola.com/accessibility.
These ratings are not guarantees. Results will vary depending
on the user’s hearing device and individual type and degree of
hearing loss. If a hearing device is particularly vulnerable to
interference noise; even a phone with a higher rating may still
cause unacceptable noise levels in the hearing device. Trying
out the phone with your hearing device is the best way to
evaluate it for your personal needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements for
hearing aid compatibility and are likely to generate less
interference to hearing devices than unrated phones. (M4 is the
better/higher of the two ratings.)
T-Ratings: Phones rated T3 or T4 meet FCC requirements and
are likely to be more usable with a hearing device’s telecoil (“T
Switch”or “Telephone Switch”) than unrated phones. (T4 is the
better/higher of the two ratings. Note that not all hearing
devices have telecoils in them.)
Hearing aid devices may also be measured for immunity to
interference noise from wireless phones and should have
ratings similar to phones. Ask your hearing health care
professional for the rating of your hearing aid. Add the rating of
your hearing aid and your phone to determine probable
usability:
䢇 Any combined rating equal to or greater than six offers
excellent use.
䢇 Any combined rating equal to five is considered normal use.
䢇 Any combined rating equal to four is considered usable.
Thus, if you pair an M3 hearing aid with an M3 phone, you will
have a combined rating of six for “excellent use.”This is
synonymous for T ratings.
Nextel further suggests you experiment with multiple phones
(even those not labeled M3/T3 or M4/T4) while in the store to
find the one that works best with your hearing aid device.
Should you experience interference or find the quality of
service unsatisfactory after purchasing your phone, promptly
return it to the store within 30 days of purchase. With the Sprint
30-day Risk-Free Guarantee, you may return the phone within
30 days of purchase for a full refund. More information about
hearing aid compatibility may be found at:
www.motorola.com/accessibility, www.fcc.gov, www.fda.gov, and
www.accesswireless.org.
S1. Important Safety Information
Important Safety Information
Using Your Phone With a Hearing
Aid Device
163
Getting the Best Hearing Device
Experience With Your Phone
To further minimize interference:
䢇 Set the phone’s display and keypad backlight settings to
ensure the minimum time interval:
䢇
䢇
1. Press / > Settings > Display/Info > Backlight > Timer or
Java Timer.
Disposal of your Mobile Device Packaging and User’s
Guide
2. Highlight the minimum time interval setting and press r.
Position the phone so the internal antenna is farthest from
your hearing aid.
Move the phone around to find the point with least
interference.
Product packaging and user’s guides should only be disposed
of in accordance with national collection and recycling
requirements. Please contact your regional authorities for more
details.
Caring for the Environment by
Recycling
This symbol on a Motorola product means the product
should not be disposed of with household waste.
Disposal of your Mobile Device and Accessories
Please do not dispose of mobile devices or electrical
accessories (such as chargers, headsets, or batteries) with
your household waste. These items should be disposed of in
164
accordance with the national collection and recycling schemes
operated by your local or regional authority. Alternatively, you
may return unwanted mobile devices and electrical
accessories to any Motorola Approved Service Center in your
region. Details of Motorola approved national recycling
schemes, and further information on Motorola recycling
activities can be found at: www.motorola.com/recycling.
S1. Important Safety Information
Export Law Assurances
This product is controlled under the export regulations of the
United States of America and Canada. The Governments of the
United States of America and Canada may restrict the
exportation or re-exportation of this product to certain
destinations. For further information contact the U.S.
Department of Commerce or the Canadian Department of
Foreign Affairs and International Trade.
Some mobile phones use an internal, permanent backup
battery on the printed circuit board that may contain very small
amounts of perchlorate. In such cases, California law requires
the following label:
Perchlorate Material – special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate. There is no
special handling required by consumers.
Radio Frequency (RF) Energy
This section contains important information on the safe and
efficient operation of your mobile device. Read this information
before using your mobile device.
Exposure to Radio Frequency (RF) Energy
Your mobile device contains a transmitter and receiver. When it
is ON, it receives and transmits RF energy. When you
communicate with your mobile device, the system handling
your call controls the power level at which your mobile device
transmits.
Your Motorola mobile device is designed to comply with local
regulatory requirements in your country concerning exposure
of human beings to RF energy.
Operational Precautions
For optimal mobile device performance, and to be sure that
human exposure to RF energy does not exceed the guidelines
set forth in the relevant standards, always follow these
instructions and precautions.
Product Operation
When placing or receiving a phone call, hold your mobile
device just like you would a landline phone.
If you wear the mobile device on your body, always place the
mobile device in a Motorola-supplied or approved clip, holder,
holster, case, or body harness. If you do not use a body-worn
accessory supplied or approved by Motorola—or if you hang
your mobile device from a lanyard around your neck—keep the
mobile device and its antenna at least 2.5 centimeters (1 inch)
from your body when transmitting.
Using accessories not supplied or approved by Motorola may
cause your mobile device to exceed RF energy exposure
guidelines. For a list of Motorola-supplied or approved
accessories, visit our website at: www.motorola.com.
RF Energy Interference/Compatibility
Important Safety Information
California Perchlorate Label
Nearly every electronic device is subject to RF energy
interference from external sources if inadequately shielded,
designed, or otherwise configured for RF energy compatibility.
In some circumstances your mobile device may cause
interference with other devices.
Follow Instructions to Avoid Interference Problems
䢇
Turn off your mobile device in any location where posted
notices instruct you to do so.
S1. Important Safety Information
165
䢇
䢇
In an aircraft, turn off your mobile device whenever instructed
to do so by airline staff.
If your mobile device offers an airplane mode or similar
feature, consult airline staff about using it in flight.
Implantable Medical Devices
If you have an implantable medical device, such as a
pacemaker or defibrillator, consult your physician before using
this mobile device.
Persons with implantable medical devices should observe the
following precautions:
䢇 ALWAYS keep the mobile device more than 20 centimeters
(8 inches) from the implantable medical device when the
mobile device is turned ON.
䢇 DO NOT carry the mobile device in the breast pocket.
䢇 Use the ear opposite the implantable medical device to
minimize the potential for interference.
䢇 Turn OFF the mobile device immediately if you have any
reason to suspect that interference is taking place.
䢇 Read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about
using your mobile device with your implantable medical
device, consult your healthcare provider.
Driving Precautions
The use of wireless phones while driving may cause distraction.
Discontinue a call if you can’t concentrate on driving.
Additionally, the use of wireless devices and their accessories
may be prohibited or restricted in certain areas. Always obey
the laws and regulations on the use of these products.
166
S1. Important Safety Information
Responsible driving practices can be found in the “Smart Practices
While Driving” section in this guide (or separate guide).
Operational Warnings
Obey all posted signs when using mobile devices in public areas.
Potentially Explosive Atmospheres
Areas with potentially explosive atmospheres are often, but not
always, posted and can include fueling areas, such as below
decks on boats, fuel or chemical transfer or storage facilities, or
areas where the air contains chemicals or particles, such as
grain dust, or metal powders.
When you are in such an area, turn off your mobile device, and
do not remove, install, or charge batteries. In such areas,
sparks can occur and cause an explosion or fire.
Knowing Radio Frequency Safety
The design of your phone complies with updated NCRP standards
described below.
In 1991–92, the Institute of Electrical and Electronics Engineers
(IEEE) and the American National Standards Institute (ANSI) joined
in updating ANSI’s 1982 standard for safety levels with respect to
human exposure to RF signals. More than 120 scientists, engineers
and physicians from universities, government health agencies and
industries developed this updated standard after reviewing the
available body of research. In 1993, the Federal Communications
Commission (FCC) adopted this updated standard in a regulation.
In August 1996, the FCC adopted hybrid standard consisting of the
existing ANSI/IEEE standard and the guidelines published by the
National Council of Radiation Protection and Measurements
(NCRP).
To maintain compliance with FCC RF exposure guidelines, if
you wear a handset on your body, use the Motorola supplied or
approved carrying case, holster or other body-worn accessory.
If you do not use a body-worn accessory, ensure the antenna is
at least 2.5 centimeters from your body when transmitting. Use
of non-Motorola-approved accessories may violate FCC RF
exposure guidelines.
Your Motorola phone is designed to comply with local
regulatory requirements in your country concerning exposure
of human beings to RF energy.
For more information about RF exposure, visit the FCC website
at www.fcc.gov.
Portable Radio Product Operation and EME Exposure
䢇
䢇
䢇
䢇
䢇
䢇
Your Motorola radio product is designed to comply with the
following national and international standards and guidelines
regarding exposure of human beings to radio frequency
electromagnetic energy (EME):
United States Federal Communications Commission, Code
of Federal Regulations; 47 CFR part 2 sub-part J.
American National Standards Institute (ANSI) / Institute of
Electrical and Electronics Engineers (IEEE). C95. 1-1992.
Institute of Electrical and Electronics Engineers (IEEE). C95.
1-2005 Edition.1
International Commission on Non-Ionizing Radiation
Protection (ICNIRP) 1998.
Ministry of Health (Canada). Safety Code 6. Limits of Human
Exposure to Radio frequency Electromagnetic Fields in the
Frequency Range from 3 kHz to 300 GHz, 1999.
䢇
䢇
Australian Communications Authority Radio
communications (Electromagnetic Radiation - Human
Exposure) Standard 2003.
ANATEL, Brazil Regulatory Authority, Resolution 303 (July 2,
2002) “Regulation of the limitation of exposure to electrical,
magnetic, and electromagnetic fields in the radio frequency
range between 9 kHz and 300 GHz.” “Attachment to
Resolution 303 from July 2, 2002.”
Specific Absorption Rate
Your Motorola Debut i856 model wireless phone meets the
governmental requirements for exposure to radio waves.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured to not exceed limits for exposure
to radio frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S. Government
and by the Canadian regulatory authorities. These limits are
part of comprehensive guidelines and establish permitted
levels of RF energy for the general population. The guidelines
are based on standards that were developed by independent
scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a
substantial safety margin designed for the safety of all persons,
regardless of age or health, and to account for any variations in
measurements.
Important Safety Information
Body-Worn Operation
1.The information provided in this document supersedes the
general safety information in user’s guides published prior to
May 1, 2006.
S1. Important Safety Information
167
The exposure standard for wireless mobile phones employs a
unit of measurement known as the Specific Absorption Rate
(SAR). The SAR limit set by the FCC and by the Canadian
regulatory authorities is 1.6 watts per kilogram (W/kg),
averaged over one gram of tissue. Tests for SAR are conducted
using procedures accepted by the FCC and by Industry
Canada with the phone transmitting at its highest certified
power level in all tested frequencies. Although the SAR is
determined at the highest certified power level, the actual SAR
level of the phone while operating can be below the maximum
value. This is because the phone is designed to operate at
multiple power levels so as to use only the power required to
reach the network. In general, the closer you are to a wireless
base station, the lower the power output.
Before a phone model is available for sale to the public in the
U.S. and Canada, it must be tested and certified to the FCC
and Industry Canada that it does not exceed the limit
established by each government for safe exposure. The tests
are performed in positions and locations (e.g., at the ear and
worn on the body) submitted to the FCC and available for
review by Industry Canada. The highest SAR value for this
model phone when tested for use at the ear is 0.88 W/kg, and
when worn on the body, as described in this user guide, is 1.15
W/kg. Body-worn measurements can differ, depending upon
available accessories and regulatory requirements. The SAR
information includes the Motorola testing protocol, assessment
procedure, and measurement uncertainty range for this
product.
While there may be differences between the SAR levels of
various phones and at various positions, they meet the
governmental requirements for safe exposure. Please note that
improvements to this product model could cause differences in
168
S1. Important Safety Information
the SAR value for later products; in all cases, products are
designed to be within the guidelines.
Additional information on SAR can be found on the Cellular
Telecommunications & Internet Association (CTIA) website:
www.phonefacts.net
or the Canadian Wireless Telecommunications Association
(CWTA) website: www.cwta.ca.
Owner’s Record
The model number, regulatory number, and serial number are
located on a nameplate inside the battery compartment.
Record the serial number in the space provided below. This will
be helpful if you need to contact us about your phone in the
future.
Model: Motorola Debut i856
Serial No.:
Online Product Registration:
http://www.motorola.com/us/productregistration
Product registration is an important step toward enjoying your
new Motorola product. Registration permits us to contact you
for product or software updates and allows you to subscribe to
updates on new products or special promotions. Registration is
not required for warranty coverage. Please retain your original
dated sales receipt, as you may need to provide it for warranty
validation in the future.
Thank you for choosing a Motorola product.
MOTOROLA, the Stylized M Logo and all other trademarks
indicated as such herein are trademarks of Motorola, Inc.
® Reg. U.S. Pat. & Tm. Off. © 2009 Motorola, Inc. All rights
reserved.
Microsoft and Microsoft Internet Explorer are registered
trademarks of Microsoft Corporation.
T9 is a trademark owned by Tegic Communications.
T9® Text Input Patent and Trademark Information.
This product is covered by U.S. Pat. 5,818,437, U.S. Pat.
5,953,541, U.S. Pat. 6,011,554 and other patents pending.
Java and all other Java-based marks are trademarks or
registered trademarks of Sun Microsystems, Inc. in the U.S. and
other countries.
All other product names or services mentioned in this manual
are the property of their respective trademark owners.
Software Copyright Notice
The Motorola products described in this manual may include
copyrighted Motorola and third party software stored in
semiconductor memories or other media. Laws in the United
States and other countries preserve for Motorola and third party
software providers certain exclusive rights for copyrighted
software, such as the exclusive rights to distribute or reproduce
the copyrighted software. Accordingly, any copyrighted
software contained in the Motorola products may not be
modified, reverse-engineered, distributed, or reproduced in any
manner to the extent allowed by law. Furthermore, the
purchase of the Motorola products shall not be deemed to
grant either directly or by implication, estoppel, or otherwise,
any license under the copyrights, patents, or patent
applications of Motorola or any third party software provider,
except for the normal, non-exclusive, royalty-free license to use
that arises by operation of law in the sale of a product.
Open Source Software Information
For instructions on how to obtain a copy of any source code
being made publicly available by Motorola related to software
used in this Motorola mobile device you may send your request
in writing to:
MOTOROLA, INC.
OSS Management
600 North US Hwy 45
Libertyville, IL 60048
USA
The Motorola website opensource.motorola.com also contains
information regarding Motorola’s use of open source.
Motorola has created the opensource.motorola.com to serve as
a portal for interaction with the software community-at-large.
To view additional information regarding licenses,
acknowledgments and required copyright notices for open
source packages used in this Motorola mobile device, please
press / > Games and Apps > Open Source Notices.
S1. Important Safety Information
Important Safety Information
Patent and Trademark Information
169
Privacy and Data Security
Smart Practices While Driving
Motorola understands that privacy and data security are
important to everyone. Because some features of your phone
may affect your privacy or data security, please follow these
recommendations to enhance protection of your information:
䢇 Monitor access: Keep your phone with you and do not leave
it where others may have unmonitored access. Lock your
device’s keypad where this feature is available.
䢇 Keep software up to date: If Motorola or a software/
application vendor releases a patch or software fix for your
phone which updates the device’s security, install it as soon
as possible.
䢇 Erase before recycling: Delete personal information or data
from your phone prior to disposing of it or turning it in for
recycling. For step-by-step instructions on how to delete all
personal information from your device, please contact your
local service provider.
䢇 Understanding AGPS: In order to comply with emergency
caller location requirements of the FCC, certain Motorola
phones incorporate Assisted Global Positioning System
(AGPS) technology. AGPS technology also can be used in
non-emergency applications to track and monitor a user’s
location, for example, to provide driving directions. Users
who prefer not to permit such tracking and monitoring
should avoid using such applications.
If you have further questions regarding how use of your phone
may impact your privacy or data security, please contact
Motorola.
Drive Safe, Call Smart SM
170
S1. Important Safety Information
Check the laws and regulations on the use of mobile devices
and their accessories in the areas where you drive. Always
obey them. The use of these devices may be prohibited or
restricted in certain areas. Contact www.motorola.com/callsmart
for more information.
Your mobile device lets you communicate by voice and data—
almost anywhere, anytime, wherever wireless service is
available and safe conditions allow. When driving a car, driving
is your first responsibility. If you choose to use your mobile
device while driving, remember the following tips:
䢇 Get to know your Motorola phone and its features such as
speed dial and redial. If available, these features help you to
place your call without taking your attention off the road.
䢇 When available, use a hands-free device. If possible, add an
additional layer of convenience to your phone with one of the
many Motorola Original hands-free accessories available
today.
䢇 Position your phone within easy reach. Be able to access
your phone without removing your eyes from the road. If you
receive an incoming call at an inconvenient time, if possible,
let your voice mail answer it for you.
䢇 Let the person you are speaking with know you are driving; if
necessary, suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow, ice, and even heavy
traffic can be hazardous.
Do not take notes or look up phone numbers while driving.
Jotting down a “to do” list or going through your address
book takes attention away from your primary responsibility,
driving safely.
䢇 Dial sensibly and assess the traffic; if possible, place calls
when your car is not moving or before pulling into traffic. If
you must make a call while moving, dial only a few numbers,
check the road and your mirrors, then continue.
䢇 Do not engage in stressful or emotional conversations that
may be distracting. Make people you are talking with aware
you are driving and suspend conversations that can divert
your attention away from the road.
䢇 Use your phone to call for help. Dial 911 or other local
emergency number in the case of fire, traffic accident, or
medical emergencies.*
䢇 Use your phone to help others in emergencies. If you see an
auto accident, crime in progress, or other serious emergency
where lives are in danger, call 911 or other local emergency
number, as you would want others to do for you.*
䢇 Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see a
broken-down vehicle posing no serious hazard, a broken
traffic signal, a minor traffic accident where no one appears
injured, or a vehicle you know to be stolen, call roadside
assistance or other special non-emergency wireless
number.*
* Wherever wireless phone service is available
Important Safety Information
䢇
S1. Important Safety Information
171
S2. Manufacturer’s Warranty
Motorola Limited Warranty
for the United States and Canada
What does this Warranty Cover?
⽧
Motorola Limited Warranty for the United States and
Canada (page 172)
⽧
Service and Repairs (page 176)
Your phone has been designed to provide you with reliable, worry-free
service. If for any reason you have a problem with your
equipment, please refer to the manufacturer’s warranty in this
section.
For information regarding the terms and conditions of service
for your phone, please visit www.nextel.com or call Nextel
Customer Service at 1-800-639-6111.
172
S2. Manufacturer’s Warranty
Subject to the exclusions contained below, Motorola, Inc.
warrants its telephones, pagers, messaging devices, and
consumer and professional two-way radios (excluding
commercial, government or industrial radios) that operate via
Family Radio Service or General Mobile Radio Service,
Motorola-branded or certified accessories sold for use with
these Products (“Accessories”) and Motorola software
contained on CD-ROMs or other tangible media and sold for
use with these Products (“Software”) to be free from defects in
materials and workmanship under normal consumer usage for
the period(s) outlined below. This limited warranty is a
consumer's exclusive remedy, and applies as follows to new
Motorola Products, Accessories and Software purchased by
consumers in the United States or Canada, which are
accompanied by this written warranty:
Products Covered
Length of Coverage
Products and
Accessories as
defined above,
unless otherwise
provided for below.
One (1) year from the date of
purchase by the first
consumer purchaser of the
product unless otherwise
provided for below.
Decorative
Accessories and
Cases. Decorative
covers, bezels,
PhoneWrap™ covers
and cases.
Limited lifetime warranty for the
lifetime of ownership by the first
consumer purchaser of the
product.
Monaural Headsets.
Ear buds and boom
headsets that
transmit mono sound
through a wired
connection.
Limited lifetime warranty for the
lifetime of ownership by the first
consumer purchaser of the
product.
Consumer and
Professional
Two-Way Radio
Accessories.
Ninety (90) days from the date of
purchase by the first consumer
purchaser of the product.
Products Covered
Length of Coverage
Products and
Accessories that are
Repaired or
Replaced.
The balance of the original
warranty or for ninety (90) days
from the date returned to the
consumer, whichever is longer.
Exclusions
Normal Wear and Tear. Periodic maintenance, repair and
replacement of parts due to normal wear and tear are excluded
from coverage.
Batteries. Only batteries whose fully charged capacity falls
below 80% of their rated capacity and batteries that leak are
covered by this limited warranty.
Abuse & Misuse. Defects or damage that result from: (a)
improper operation, storage, misuse or abuse, accident or
neglect, such as physical damage (cracks, scratches, etc.) to
the surface of the product resulting from misuse; (b) contact
with liquid, water, rain, extreme humidity or heavy perspiration,
sand, dirt or the like, extreme heat, or food; (c) use of the
Products or Accessories for commercial purposes or
subjecting the Product or Accessory to abnormal usage or
conditions; or (d) other acts which are not the fault of Motorola,
are excluded from coverage.
Warranty
Products and Accessories
Use of Non-Motorola Products and Accessories. Defects or
damage that result from the use of
S2. Manufacturer’s Warranty
173
Non-Motorola branded or certified Products, Accessories,
Software or other peripheral equipment are excluded from
coverage.
Unauthorized Service or Modification. Defects or damages
resulting from service, testing, adjustment, installation,
maintenance, alteration, or modification in any way by
someone other than Motorola, or its authorized service centers,
are excluded from coverage.
Altered Products. Products or Accessories with (a) serial
numbers or date tags that have been removed, altered or
obliterated; (b) broken seals or that show evidence of
tampering; (c) mismatched board serial numbers; or (d)
nonconforming or non-Motorola housings, or parts, are
excluded from coverage.
Communication Services. Defects, damages, or the failure of
Products, Accessories or Software due to any communication
service or signal you may subscribe to or use with the Products
Accessories or Software is excluded from coverage.
Software
Products Covered
Length of Coverage
Software. Applies only to
physical defects in the media
that embodies the copy of the
software (e.g. CD-ROM, or
floppy disk).
Ninety (90) days from
the date of purchase.
Exclusions
Software Embodied in Physical Media. No warranty is made
that the software will meet your requirements or will work in
combination with any hardware or software applications
provided by third parties, that the operation of the software
products will be uninterrupted or error free, or that all defects in
the software products will be corrected.
Software NOT Embodied in Physical Media. Software that is not
embodied in physical media (e.g. software that is downloaded
from the internet), is provided “as is” and without warranty.
Who Is Covered?
This warranty extends only to the first consumer purchaser, and
is not transferable.
174
S2. Manufacturer’s Warranty
Motorola, at its option, will at no charge repair, replace or refund
the purchase price of any Products, Accessories or Software
that does not conform to this warranty. We may use functionally
equivalent reconditioned/refurbished/pre-owned or new
Products, Accessories or parts. No data, software or
applications added to your Product, Accessory or Software,
including but not limited to personal contacts, games and
ringer tones, will be reinstalled. To avoid losing such data,
software and applications please create a back up prior to
requesting service.
How to Obtain Warranty Service or Other
Information
USA
Phones
1-800-453-0920
TTY
1-877-483-2840
For Accessories and Software, please call the
telephone number designated above for the product
with which they are used
You will receive instructions on how to ship the Products,
Accessories or Software, at your expense, to a Motorola
Authorized Repair Center. To obtain service, you must include:
(a) a copy of your receipt, bill of sale or other comparable proof
of purchase; (b) a written description of the problem; (c) the
name of your service provider, if applicable; (d) the name and
location of the installation facility (if applicable) and, most
importantly; (e) your address and telephone number.
What other limitations are there?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY, OTHERWISE THE REPAIR,
REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS
EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY
OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT
SHALL MOTOROLA BE LIABLE, WHETHER IN CONTRACT OR
TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS
OF THE PURCHASE PRICE OF THE PRODUCT, ACCESSORY
OR SOFTWARE, OR FOR ANY INDIRECT, INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR
LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS
OF INFORMATION OR DATA, SOFTWARE OR APPLICATIONS
OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN
CONNECTION WITH THE ABILITY OR INABILITY TO USE THE
PRODUCTS, ACCESSORIES OR SOFTWARE TO THE FULL
EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
S2. Manufacturer’s Warranty
175
Warranty
What Will Motorola Do?
Some states and jurisdictions do not allow the limitation or exclusion of
incidental or consequential damages, or limitation on the length of an
implied warranty, so the above limitations or exclusions may not apply
to you. This warranty gives you specific legal rights, and you may also
have other rights that vary from state to state or from one jurisdiction to
another.
Laws in the United States and other countries preserve for
Motorola certain exclusive rights for copyrighted Motorola
software such as the exclusive rights to reproduce and
distribute copies of the Motorola software. Motorola software
may only be copied into, used in, and redistributed with, the
Products associated with such Motorola software. No other use,
including without limitation disassembly of such Motorola
software or exercise of the exclusive rights reserved for
Motorola, is permitted.
176
S2. Manufacturer’s Warranty
Service and Repairs
If you have questions or need assistance, we’re here to help.
Go to www.motorola.com/support, where you can select from
a number of customer care options. You can also contact the
Motorola Customer Support Center at 1-800-453-0920 (United
States), 1-877-483-2840 (TTY/TDD United States for hearing
impaired).
Skip 147
Volume 148
B
A
Accessories 19
Charger 19
Li-Ion Battery 19
Activation 2
Airplane Mode 78
Answering Calls 21
Applications
See also Java Applications
Attachments 57
See also MMS Messages
Audio Files
Fast Forward and Rewind
148
Inserting in Messages 55
Pause 147
Playing 147
Resume 147
See also Voice Records
Backlight 74
Battery 9–11
Charging 11
Disposal 161
Installing 10
Safety 160
Bluetooth 135–140
Deleting Received Items 140
Receiving Items 139
Sending Contacts 138
Transfers, Canceling 140
Viewing Received Items 139
Bookmarks
Accessing 68
Creating 68
Browser
Opening 67
Restarting 69
C
Calendar
See Datebook
Call Alerts
Answer 41
Deleting 42
Queue 41
Responding 42
Sending 41
Viewing 42
Call Filtering 82
Call Forwarding 62
All Calls 62
Missed Calls 63
Off 63
Call Timers 122
Call Waiting 60
Off 60
Caller ID 59
Calls
Direct Connect Calls 27
Direct Talk Calls 42
Index
Index
Index
177
From Contacts 29
Group Connect 30
International 64
Phone Call While in Direct
Connect 26
Phone Calls 21
Talkgroup Calls 39
Using the Member ID 28
Voice Name 26, 29
Camcorder
See Video
Camera 129–131
Camera Setup 131
Exposure Control 130
GPS Tag 130, 131
Options 130
Self Timer 130
Style 130
Talking Pictures 129
White Balance 130
Zoom 131
Carousel 85
Clock Display 75
178
Index
Contacts 98–105
Adding an Entry 99
Assign a Picture to an Entry
105
Creating 99
Deleting 103
Editing Entries 102
Making Direct Connect Calls
29
Making Phone Calls 26
Searching 101
Voice Name 100
D
Datebook
Creating Events 107
Deleting Events 109
Editing Events 109
Making Calls From Datebook
and Datebook Reminders
110
Receiving Reminders 109
Using Your Phone’s
Datebook 106
Dialing Codes
Non-Emergency Numbers
64
Telecommunications Relay
Service 64
Digital Rights Management
See DRM
Direct Connect
One Touch, Setting 79
Direct Connect Calls
Dialing 28
From Contacts 29
Member ID 28
Voice Name 29
Direct Connect Number
Viewing 15, 111
Direct Connect Numbers 28
Direct Send 34–38
Contacts 37
Groups 38
My Info 36
Pictures 34
E
Email 67
Emergency Numbers 22
Group Connect
Adding Group Members 30
Creating Groups 30
Deleting 32
Groups vs. Talkgroups 39
Icons 33
Making Calls 30
Removing Members 32
Sending With Direct Send 38
Settings 90
End-of-Call Options 24
Entering Text 15–19
Alpha Mode 17
Numbers 17
Quick Notes 17
Selecting Mode 15
Word Text Input 16
F
Fast Forward
Music 148
H
G
Games 69
See also Java Applications
GPS Enabled 115
Best Results 117
Emergency Calls 116
Map Software 118
Privacy Options 87
Security 88
Viewing Location 116
GPS PIN 88
Headset 79
Hearing Aid Compatibility 163
I
Icons
Contacts 99
Groups 33
Status Information 12
Images
Editing 153, 154
Menu 153
Slideshow 153
Viewing 153
Index
179
Index
Receiving Contacts 38
Receiving My Info 38
Receiving Pictures 35
Direct Talk
Code 43
Private Only 44
Receiving All Calls On
Channel 45
Setting Up 43
Display Screen 12
Downloading Content 69
DRM 114
Deleting Items 144
Expired Items 115
Managing Items 114
Renewing Items 114
Renewing License 114
Status Icons 143
Viewing License Information
114
In-Call Options 23
International Numbers 64
J
Java Applications 112–113
Deleting 113
Downloading 113
Downloading Games 69
Ending Applications 113
Installing Applications 112
Memory 114
Privacy 89
Resuming Applications 112
Running Applications 112
Suspending Applications
112
K
Key Functions 6
L
Language 86
Lock Code
Changing 92
Locking Your Keypad 92
180
Index
Locking Your Phone 91
M
Making Calls 21
Media Center 141
Deleting 143
Forward Locked 142
Locking Items 143
Memory 144
Pictures 144
Renaming Items 143
Viewing 141
Memo 119
Calling From 120
Editing 119
Viewing 119
Memory
Java Applications 114
Media Center 144
MMS Messages 76
Ring Tones 71
Voice Records 121
Menu
Navigation 13
Selecting 14
Menu Style 75
Message Center 47
MMS Messages 50
Text Messaging (SMS) 59
Voicemail 49
Messages
Notifications 48
Messaging Settings
Notification 76
Signature 78
microSD Card 123–128
Adapter 125
Folders 127
Formatting 126
Inserting 123
Memory 126
Removing 124
MMS Messages 50–59
Attachments 57
Calls From 58
My Info
Editing 111
Receiving 38, 94
Sending 36
My Music
Accessing 146
Deleting Files 151
Equalizer 152
Folders and Lists 146
Playlists 149
Repeat 148
Visuals 152
N
Nextel Direct Send
See Direct Send
Nextel Direct Talk
See Direct Talk
Nextel Service
Account Passwords 3
Activation 2
Operator Services 4
Non-Emergency Numbers 64
Notepad
See Memo
O
One Touch Direct Connect 79
Outbox 56
Owner’s Record 168
Index
CleanUp 77
Deleting 57
Embedded Objects 57
Forwarding 56, 57
Going to Website 59
Locking 58
Memory 76
Outbox 56
Quick Notes 54
Receiving 56
Sending 50
Multimedia 141–153
Multimedia Messages
See MMS Messages
Music
Fast Forward and Rewind
148
Pause and Resume 147
Playing 147
Volume 148
Mute 24
P
Pauses 25
Storing 101
Phone
Connecting to Computer
127
Phone (illus.) 5
Phone Number
Finding 25
Saving 24
With Pauses 25
Your Numbers 15
Phone Settings 70–91
Call Answer Mode 85
Display Settings 74–76
Language 86
Index
181
Messaging Settings 76–78
Shortcuts 83
Sound Settings 70–74
Pictures 144
Inserting in Messages 54,
145
Saving From Messages 59
Playlist 149
Creating 149
Editing 149
Favorites 151
Reordering 150
Podcasts 151
Prepend Dialing 86
Profiles 79
Call Filtering 82
Creating 81
Deleting 81
Editing 81
Switching 80
Temporary 80
Viewing 80
182
Index
PTT Options 90
Push To Talk 90
Q
Quick Notes 54
R
Radio Frequency 165
Recent Calls 93–97
Call Alerts 94
Deleting Recent Calls List 96
My Info 94
Prepending a Number 97
Saving a Number 96
Remote Direct Connect Button
19
Resetting Your Phone 86
Rewind
Music 148
Ring Tones
Deleting 71
Memory 71
Setting in Contacts 100
Vibrate 73
Ringer Types 70
S
Safety Information 156–171
Radio Frequency 165
Tips 157
Security 90–92
Shortcuts
Creating 83
Deleting 84
Editing 84
Using 83
Silence All 73
SIM Card
Removing and Inserting 8
Security 90
SIM PIN 90
Songs
See Music Player
Speakerphone 24
Speed Dial
Assigning Numbers 103
Making a Call 27
Talkgroups 39
Join 40
Settings 90
TDD/TTY Devices 64
Telecommunications Relay
Service 64
Text Entry 15–18
Database 16
Mode 15
Text Messaging
See MMS Messages
Three-Way Calling 61
Transmitters
Turning On and Off 78
TTY Devices 64
Turning Your Phone On and
Off 11
U
Unlocking Your Keypad 92
Unlocking Your Phone 92
Vibrate All 72
Video 131
My Videos 154
Options 132
Recording 131
Settings 132
Viewing 154
Voice Name 26, 29
Creating 100
Voice Records
Creating 120
Deleting 121
Inserting in Messages 55
Labelling 121
Locking 121
Memory 121
Playing 121
Saving From Messages 59
Voicemail
Playing Messages 49
Retrieving 48
Setting Up 2, 49
W
Waits
Storing 101
Wallpaper 74, 145
Warranty 172–176
Web 67–69
Bookmarks 68
Go to Websites 68
Launching 67
Reloading a Web Page 69
Restarting 69
Wireless Data Services 67
Downloads 69
Games, Ringers, & More 69
Word Text Input 16
Index
Index
Volume
Music 148
V
T
183