IMPRES
TM
Smart Energy System
Motorola’s state-of-the-art IMPRESTM
technology allows communication
between the battery and the charger.
The result – a radio system that’s
charged and ready to go whenever
you need it.
2
Unique Battery Charging and Reconditioning Solution
Automated battery maintenance
Now manual tracking and recording of battery use are a thing of the past.
IMPRESTM uses a unique communications protocol to facilitate adaptive reconditioning – the charger evaluates the details of the battery’s usage pattern to determine
the optimal reconditioning interval. This automated process works to diminish
memory effect and optimize the cycle life of the battery and maximize talk time.
Chargers that communicate
IMPRES multi-unit chargers are available with a two-line display module. Your
customers now have access to valuable information such as:
• Battery capacity (in mAh and percent of minimum rated capacity) and voltage
while charging and at completion of charge
• Time remaining to complete rapid charging (NiCd and NiMH only)
• Current battery charge status
• The battery’s unique serial number, part number and chemistry
Knowledge is power. Now you can make informed decisions on battery replacement and asset management.
Long-term safe charging
IMPRES batteries may be left in IMPRES chargers for extended periods without
heat damage due to the charger and will be monitored by the charger so that
they are charged and ready to go whenever they are needed.
Support for mixed battery inventories
IMPRES chargers are compatible with non-IMPRES Motorola batteries, making
the migration to all IMPRES much easier. However, automatic reconditioning and
all other IMPRES features are realized only when using Motorola IMPRES batteries
and chargers.
Extended warranty
When used exclusively with IMPRES chargers, IMPRES batteries carry extended
capacity warranties that continue six months longer than Motorola Premium
battery warranties.
Proven Tough
IMPRES batteries are subjected to the same rigorous testing and held to the same
high standards as all Motorola Premium batteries. Actual results of Drop, Vibration
and ESD (Electrostatic Discharge) tests prove that Motorola batteries outperform
the competition. For details of all test results go to www.proventough.com.
3
TM
IMPRES Smart Energy Systems
– ready when you are.
Make sure your radios are ready for action when you are
– an IMPRES battery may be left in an IMPRES charger
for extended periods without heat damage due to the
charger. This makes IMPRES ideal for applications that
require equipment in a “ready” state at all times.
WPLN4130A
IMPRES Multi-Unit Charger
with Display Modules
4
Facts:
TM
1. IMPRES products are smarter because they
“talk” to each other.
Motorola’s industry-exclusive IMPRES technology
allows communication between the charger and
the battery, which enables automated battery reconditioning, display of critical charging information
and other key benefits. IMPRES batteries have a
memory chip that stores all usage information,
which can then be accessed and evaluated by any
IMPRES charger. IMPRES chargers have built-in reconditioning capability that is automatically utilized
any time an IMPRES battery requiring maintenance
is inserted.
2. IMPRES chargers perform adaptive reconditioning.
Before the availability of IMPRES chargers with
automatic, adaptive reconditioning, battery maintenance technicians had to guess at the correct
reconditioning intervals. Reconditioning too often
wasted battery cycles; not reconditioning often
enough resulted in diminished battery performance.
IMPRES has changed all that. IMPRES chargers
evaluate the actual usage pattern of every battery to
establish the optimal reconditioning interval.
3. IMPRES offers long-term safe charging.
Most conventional chargers transition to a maintenance charge mode at the completion of a charge
cycle. Maintenance charge is constant power applied
to a battery in an effort to keep it charged over time.
This results in long-term heating that can damage a
battery, resulting in lost capacity. IMPRES chargers
automatically turn off at the end of a charge cycle
yet continue to electronically monitor IMPRES
batteries every 5 minutes to determine when more
energy should be applied to the battery. This process
assures that the battery maintains a very high state
of charge without sustaining heat damage due to
the charger.
4. Fully charged doesn’t mean full battery capacity.
Most conventional chargers have an LED to indicate
charge status. Red indicates charging and green
indicates charge complete. But what does charge
complete really mean? The charger is saying that it
did the best it could given the condition of the battery
and it is done. However, the resulting battery capacity
could be far less than the original stated capacity
for an old or defective battery, yet the user has no
way of knowing that with only an LED indication.
IMPRES chargers with displays provide the actual
charge capacity of the battery, so you’ll know exactly
how much usage you will get from each battery.
5. IMPRES charger LED indicators give additional
information.
IMPRES chargers have additional LED indication
capability to supply you with even more information
during a charge cycle. The alternating red/green
LED indicates batteries have fallen below a certain
capacity threshold (typically less than 60% of rated
minimum capacity). An IMPRES battery exhibiting a
red/green indication is not defective – it has simply
reached a capacity level that may limit its usage.
5
Myth:
Competitive batteries are IMPRES compatible.
Competitive battery manufacturers often claim to be
“IMPRES compatible.” While it may be true that some
competitive batteries can be charged in IMPRES chargers, there are still significant limitations and concerns. The communication between an IMPRES battery and IMPRES charger that enables automatic
reconditioning, display of IMPRES data on display
chargers and other IMPRES features is a Motorola exclusive technology and will only occur with the combination of IMPRES batteries and IMPRES chargers.
Motorola does not test the charge compatibility or
safety of competitive batteries in IMPRES chargers.
Quick Reference Guide
IMPRESTM Battery and Charger Guide by Radio Series
For ASTRO® Digital XTS 3000TM, XTS 3500TM and XTS 5000TM
Display shows battery capacity, voltage,
charge status and more in real time.
BATTERY PART NUMBER
CHEMISTRY
CAPACITY†
HNN9031B
NiCd
1525mAh
HNN9032B
NiCd
1525mAh
SPECIAL FEATURES
Intrinsically Safe*
NNTN4435B
NiMH
1800mAh
NNTN4436B
NiMH
1700mAh
Intrinsically Safe*
Intrinsically Safe*, Ruggedized
NNTN4437B
NiMH
1700mAh
NTN9862C
Li-ion
2750mAh
NNTN6034A
Li-ion
4150mAh
For ASTRO® Digital XTS 1500TM, XTS 2500TM, MT 1500TM and PR1500
BATTERY PART NUMBER
WPLN4130A – With Display Modules (shown)
WPLN4108BR – Without Display Modules
CHEMISTRY
CAPACITY†
SPECIAL FEATURES
NTN9858C
NiMH
2100mAh
NTN9857C
NiMH
2000mAh
Intrinsically Safe*
NNTN6263A
NiMH
2000mAh
Intrinsically Safe*, Ruggedized
The batteries listed above are designed for use with the following chargers:
WPLN4111AR – IMPRES Single Unit Charger
WPLN4108BR – IMPRES Multi-Unit Charger
WPLN4130A – IMPRES Multi-Unit Charger with Display Modules
WPLN4208B – IMPRES Compatible Vehicular Charger
RLN5382A – Individual IMPRES Display Module for WPLN4108BR (Software Version 1.3 or later)
NEWEST ADDITION! IMPRES Compatible Vehicular Charger
The new IMPRES compatible vehicular charger has full IMPRES charger to battery communication capability.
This ensures continuity of IMPRES battery charge data logging in a vehicular environment, so the IMPRES
battery will receive adaptive, automatic reconditioning and will qualify for the 6-month capacity warranty
extension. It is important to note that the IMPRES compatible vehicular charger will not recondition IMPRES
batteries due to operational demand in a vehicle, but it will provide an indication when reconditioning is
required in an IMPRES desktop charger.
WPLN4208B – Charge the battery attached
to the radio or alone.
For HT1000TM, MT 2000TM, MTS 2000TM, JT 1000TM, MTX8000TM
and MTX9000TM
BATTERY PART NUMBER
CHEMISTRY
CAPACITY†
HNN9028AR
NiCd
1550mAh
SPECIAL FEATURES
HNN9029AR
NiCd
1550mAh
Intrinsically Safe*
CAPACITY†
SPECIAL FEATURES
For Saber and ASTRO® Saber
BATTERY PART NUMBER
CHEMISTRY
HNN9033B
NiCd
2000mAh
HNN9034B
NiCd
2000mAh
Intrinsically Safe*
The batteries listed above are designed for use with the following chargers:
WPLN4111AR – IMPRES Single Unit Charger
WPLN4108BR – IMPRES Multi-Unit Charger
WPLN4111AR
WPLN4130A – IMPRES Multi-Unit Charger with Display Modules
RLN5382A – Individual IMPRES Display Module for WPLN4108BR (Software Version 1.3 or later)
6
† Indicates minimum rated battery capacity.
* When used with an FM approved intrinsically safe radio unit.
Quick Reference Guide (continued)
IMPRESTM Battery and Charger Guide by Radio Series
WPLN4219A – With Display Modules (shown)
WPLN4212A – Without Display Modules
For MOTOTRBOTM
BATTERY PART NUMBER
CHEMISTRY
CAPACITY†
SPECIAL FEATURES
PMNN4066A
Li-ion
1500mAh
Ruggedized
PMNN4069A
Li-ion
1400mAh
Intrinsically Safe*, Ruggedized
The batteries listed above are designed for use with the following chargers:
WPLN4232A – IMPRES Single Unit Charger
WPLN4212A – IMPRES Multi-Unit Charger
WPLN4219A – IMPRES Multi-Unit Charger with Display Modules
RLN5382A – Individual IMPRES Display Module for WPLN4212A
WPLN4232A
WPLN4192A – With Display Modules
WPLN4187A – Without Display Modules (shown)
For HT750TM, HT1250TM, HT1250•LS+TM, HT1550•XLSTM, MTX850TM,
MTX850•LSTM, MTX8250TM, MTX8250•LSTM, MTX950TM, MTX9250TM
and PR860
BATTERY PART NUMBER
CHEMISTRY
CAPACITY†
HNN4001A
NiMH
1800mAh
HNN4002A
NiMH
1690mAh
HNN4003A
Li-ion
2000mAh
SPECIAL FEATURES
Intrinsically Safe*
The batteries listed above are designed for use with the following chargers:
WPLN4182A – IMPRES Single Unit Charger
WPLN4187A – IMPRES Multi-Unit Charger
WPLN4192A – IMPRES Multi-Unit Charger with Display Modules
RLN5382A – Individual IMPRES Display Module for WPLN4187A
Display shows battery capacity, voltage,
charge status and more in real time.
7
WPLN4182A
† Indicates minimum rated battery capacity.
* When used with an FM approved intrinsically safe radio unit.
Specifications
IMPRESTM
Smart Energy System
IMPRES Single Unit Chargers
MODEL NUMBER:
WPLN4111AR
WPLN4232A
WPLN4182A
3.23" x 3.82" x 7.88"
2.2" x 3.8" x 5.8"
2.2" x 3.8" x 5.8"
90-265 VAC
100-132 VAC
100-132 VAC
50-60 Hz
50-60 Hz
50-60 Hz
Charging Method: (all chargers) CCDT / Negative Pulse (NiCd/NiMH) and CCCV (Li-ion)
Charging Current: (maximum)
1.5 A
1.25 A
1.25 A
2 Years
2 Years
2 Years
Warranty:
Operating Temperature:
41° to 104° F
41° to 104° F
41° to 104° F
Dimensions: (H" x W" x D")
Input Voltage:
IMPRES Multi-Unit Chargers
MODEL NUMBER:
WPLN4108BR
WPLN4130A
WPLN4187A
6" x 17.5" x 11.5"
6" x 17.5" x 11.5"
6" x 17.5" x 11.5"
90-265 VAC
90-265 VAC
90-265 VAC
50-60 Hz
50-60 Hz
50-60 Hz
Charging Method: (all chargers) CCDT / Negative Pulse (NiCd/NiMH) and CCCV (Li-ion)
Charging Current: (maximum)
1.5 A
1.5 A
1.5 A
2 Years
1 Year
2 Years
Warranty:
Operating Temperature:
41° to 104° F
41° to 104° F
41° to 104° F
Dimensions: (H" x W" x D")
Input Voltage:
IMPRES Compatible Vehicular Charger
MODEL NUMBER:
WPLN4208B
Dimensions: (H" x W" x D")
Input Voltage:
Charging Method:
Charging Current: (maximum)
Warranty:
Operating Temperature:
3.23" x 3.82" x 7.88"
10.8-16.6 VDC
CCDT (NiCd/NiMH) and CCCV (Li-ion)
1.25 A
1 Year
5° to 122° F (Charge rate decreased at extreme temperatures.)
IMPRES Battery Warranty
24 months against any defects in manufacturing or workmanship. Nickel-Cadmium batteries are warranted to maintain
80% rated capacity for 18 months. Nickel-Metal Hydride and Lithium-ion batteries are warranted to maintain 80% rated
capacity for 12 months. IMPRES batteries charged exclusively in IMPRES chargers carry an additional 6 months of
capacity warranty.
Motorola, Inc.
United States
1309 E. Algonquin Road
Schaumburg, Illinois 60196
Phone: 1-800-422-4210
TTY: 1-800-522-5210
Fax: 1-800-622-6210
MOTOROLA and the Stylized M Logo are registered in the
US Patent & Trademark Office. All other product or service
names are the property of their respective owners.
© Motorola, Inc. 2007.
6880309S07 (06-07)
,
WPLN4192A
WPLN4212A
WPLN4219A
6" x 17.5" x 11.5"
90-265 VAC
50-60 Hz
6" x 17.5" x 11.5"
90-265 VAC
50-60 Hz
6" x 17.5" x 11.5"
90-265 VAC
50-60 Hz
1.5 A
1 Year
41° to 104° F
1.5 A
2 Years
41° to 104° F
1.5 A
1 Year
41° to 104° F