Motorola MOTOSTART HS815 User's Manual

BEFORE YOU
BEGIN
Before using this product, read the Important Safety and Legal
Information pamphlet and follow its instructions.
HS815
Bluetooth®
Handsfree Headset
Get Connected in
4 Quick Steps
1 - CHARGE
2 - START
BLUETOOTH
3 - PAIR
4 - TEST AND
USE
Take a moment before you get started to
familiarize yourself with your new
HS815 Headset.
Earhook Charging
Earhook
Charging
Port
Call Button
Port
Call Button
Indicator Light
LED Indicator
Microphone
Microphone
Volume Buttons
Volume Buttons
For help, contact us at 1- 877-MOTOBLU
or visit us at www.hellomoto.com
1
CHARGE
Your Headset's Battery
2
Speaker
Speaker
(on
(onreverse
reverse
side)
side)
START BLUETOOTH
FEATURE
Your Phone
Your phone's Bluetooth feature is off by default.
To use your headset, turn on the Bluetooth
feature in your phone.
For most Motorola phones:
1 Select M (Menu ) > Settings > Connection >
Release Tab Down
1 Plug the Motorola charger into the end of
the headset with the release tab facing
down.
The indicator light turns on when the battery
is charging. It may take up to 1 minute for
the indicator light to turn on. When the
headset's battery is fully charged (about 2
hours), the indicator light turns off.
2 Disconnect the charger.
Note: Headset is not functional while charging.
Bluetooth Link > Setup.
2 Scroll to Power.
3 Select Change.
4 Scroll to On.
5 Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on
until you turn it off.
Note: These steps are for most Motorola phones. For other
phones, see your phone's user's guide.
or visit us at www.hellomoto.com
3
PAIR
Your Headset
Before you can use your headset, you must pair
(link) it with your phone.
Step A - PUT THE HEADSET IN PAIRING
MODE
Indicator Light
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
www.hellomoto.com
1-877-MOTOBLU
1-800-331-6456 (United States)
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
1-800-461-4575 (Canada)
Guide Number: 6809495A04-O
When you see this symbol on a Motorola product, do
not dispose the product with household waste.
1 Ensure the headset is turned off (indicator
light not blinking).
2 Press and hold the Call E button for 4 or 5
seconds. The indicator light will initially flash,
but continue to hold down the button until
the indicator light is steadily lit.
If the indicator light is flashing or not steadily
lit when releasing the button, repeat both
steps 1 and 2 on this page.
3
PAIR CONTINUED
Your Phone
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
For most Motorola phones:
1 On your Motorola phone, press M (Menu ) >
Settings > Connection > Bluetooth Link >
Handsfree > Look for Devices.
The phone lists Bluetooth devices it finds.
2 Select Motorola HS815.
3 Select OK or Yes to pair your headset with
4
5
your phone.
Enter the passkey: 0000
Select OK.
When your headset successfully pairs with
your phone, the indicator light changes from
steadily lit to flashing.
Note: These steps are for most Motorola phones. For other
phones, see your phone's user's guide.
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office.The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© Motorola, Inc. 2005.
4
TEST AND USE
Your phone and headset are now paired
and ready to make and receive calls.
To make a call:
1 Place the headset over your ear.
2 On your phone, dial the number you want
to call and press the SEND key.
3 If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your
phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.
To save battery power, turn OFF the
headset when you don't use it for an
extended time.
USING YOUR HS815
TROUBLESHOOTING
See
Features and
Functions Guide
on the reverse side
for information on
using your HS815.
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on and steady when your phone is searching
for devices (see step 3).
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2).
If the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and
pair your phone and headset again (see step 3).
Support.
If you need more help, contact us at
1- 877-MOTOBLU.
FOR DETAILS ABOUT YOUR HANDSFREE
DEVICE
See the user’s guide or visit us at
www.hellomoto.com/bluetooth and click
Support.
Features and
Functions Guide
HS815
Bluetooth®
Handsfree Headset
TURNING ON
AND OFF
To turn on the headset, press and hold the
Call E button on your headset until the
indicator light begins flashing. The indicator
light blinks when the power is on.
To turn off the headset, press and hold the
Call E button on your headset for 5
seconds. The indicator light will flash rapidly
and then stop flashing.
Call Button
IMPORTANT:
Be sure to first follow the
instructions
on the reverse side to
complete initial setup of
your HS815
Indicator Light
WEARING
THE HEADSET
1 Open the earhook.
2 Loop the earhook over your ear.
3 Press the headset to your ear.
4 Point the microphone toward your mouth.
ADJUSTING VOLUME
To adjust the volume on your headset, press
the Volume Up or Volume Down button
until you reach the desired volume level.
Volume Buttons
When increasing (or decreasing) speaker
volume, a single audio tone is heard when
reaching maximum (or minimum) level.
CHANGING FOR USE
ON OTHER EAR
You can wear your HS815 headset on your
left or right ear.
To change ear orientation, simply flip the
earhook all the way over.
MAKING CALLS
MAKING CALLS CONTINUED
Function
Action
Function
Action
Make a voice dial call
Tap the Call E
button and speak
the name after the
tone
Answer a second
incoming call
Press and hold the
Call E button (places
first call on hold)
Toggle between two
active calls
Press and hold
the Call E button
(places other call on
hold)
Put an active call on
hold or resume a call
Press and hold the
Call E button until
you hear a beep
Transfer a call from the
phone to the headset
Tap the Call E
button
End a call
Tap the Call E
button
Redial a number
Press and hold the
Call E button until
you hear a beep
Receive a call
Reject a call
Tap the Call E
button
Press and hold the
Call E button until
you hear a beep
Note: Your HS815 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's
guide for more information.
Note: If the link between the headset and phone
abnormally disconnects (for example, out of range), the
headset tries to reestablish the link.
INDICATOR LIGHTS
AUDIO TONES
The indicator light provides information about
your headset status.
The audio tones provide information about your
headset status.
With the Charger Plugged In
Indicator Light
Headset Status
Audio Tone
Headset Status
Single high tone when
pressing Volume button
Volume minimum
or maximum
reached
Five rapid high tones
repeated every 60 sec.
Low battery
Out of range
On (steady)
Charging
Off
Charging complete
With No Charger Plugged In
Indicator Light
Headset Status
Off
Power off
No audio indications;
deteriorating audio
quality
On (steady)
Pairing mode
Ring tone
Incoming call
10 rapid flashes
Pairing successful
Single high tone
Slow pulse
Connected
(on a call)
Pairing confirmation
or End call
Single low tone
Voice activation
Dual high/low tone
Voice tag not
recognized
Low to high tone
Phone network
not available
Quick flash
Standby
(not on call)
Note: After 5 minutes of inactivity, the indicator light stops
flashing to conserve power, but the headset remains in
standby mode.