Netgear 763S Quick Start Guide

Add to my manuals
24 Pages

advertisement

Netgear 763S Quick Start Guide | Manualzz
Sierra Wireless
AirCard®
Mobile Hotspot
QUICK START GUIDE
GUIDE DE DÉMARRAGE RAPIDE
Get to Know Your Device
Navigation key
WPS button
Power key
LCD screen
micro USB port
Also in the box:
• Lithium ion battery
• Wall charger
• USB cable
Buttons & keys
1
Lock / unlock the mobile
hotspot
Press and hold the Navigation key
for 3 seconds.
Mute / unmute the audio
alerts
• Press and hold WPS button and
Navigation key for 3 seconds, or
• Press the Navigation key to go
to the Messages / Alerts LCD
screen and follow the prompts.
Reset the device to
factory settings
Press and hold the WPS button
and Power key for 5 seconds and
follow the LCD on-screen prompts.
2
1
3
4
5
6
7
LTE
8
9
Network
10
AirCard-xxxx
Wi-Fi Passphrase: 12345678
To conĮŐƵre yŽƵƌŚŽƚƐƉŽƚ
ŐŽƚŽŚƩƉ͗ͬͬĂŝƌĐĂƌĚ͘ŚŽƚƐƉŽƚ
11
English
Your Device LCD Screen
12
1
Signal strength
7
Battery
2
Network technology
8
Status icons
3
Roaming
Messages
View at http://aircard.hotspot
GPS
9
10
Operator name
Wi-Fi SSID
11
Homepage URL
12
Data usage information
4
5
6
Wi-Fi on or off
The number indicates
the number of devices
connected.
Press the Navigation key to cycle through the following
screens:
• Connect Info (Wi-Fi SSID and Wi-Fi Passphrase)
• WPS Setup
• Messages / Alerts
• Data Usage / Billing Info
• Device Info / About
2
Step 1: Set up Device
1. Slide the SIM card under the cover, as shown in the
illustration.
2. Insert the battery as shown in the illustration.
(The battery installs easily. If it does not go in easily, check
the orientation. Do not force it.)
Gold contacts
Battery
3. Replace the back cover.
Your AirCard Mobile Hotspot comes with the battery partially
charged. When you need to recharge the battery, use the USB
cable to attach the hotspot to:
• A wall socket, using the AC adapter (fastest option)
• The USB port on your laptop
3
Step 2: Connect to the
Internet
1. Press and hold the Power key for a
few seconds. Once powered up, the
mobile hotspot automatically connects
to the mobile broadband network.
The first time you turn on the mobile
hotspot, you’ll be asked to select a language on the LCD.
After that, you can change the language on the homepage.
2. The LCD screen displays the message “Connect your
computer to Wi-Fi network” and shows you the Wi-Fi SSID
(Network name) and Wi-Fi Passphrase.
LTE
Network
SSID: AirCard-xxxx
Wi-Fi PĂƐƐƉŚrase: 12345678
To ĐonĮŐƵre yŽƵƌŚŽƚƐƉŽƚ
go to ŚƩƉ͗ͬͬĂŝƌĐĂƌĚ͘ŚŽƚƐƉŽƚ
Note: The LCD screen goes into sleep mode to save power. To
wake up the LCD screen, press and release the Power key.
3. On your computer or mobile device, open your Wi-Fi / network
connection manager.
4. Select the Wi-Fi SSID displayed on the LCD screen.
5. When prompted, enter your Wi-Fi Passphrase, as it appears
on the LCD screen.
When the computer or mobile device connects to the mobile
hotspot, a ‘1’ appears beside the Wi-Fi icon on the LCD
screen.
6. Launch your browser and, if desired, go to
http://aircard.hotspot to personalize your settings.
(Note: The mobile hotspot is completely secured using its
default security settings.)
7. Optional step: Depending on your service provider, you may
need to create a profile to connect to the mobile broadband.
Follow the instructions on page 10.
4
Security Credentials
Wi-Fi Passphrase
• Use to connect a wireless device to your Wi-Fi network
• The Wi-Fi Passphrase is shown on the LCD screen.
Admin Password
• Your default Admin Password is swiadmin.
• Use this password to log in to the AirCard Homepage and
make changes such as enabling GPS or changing your
security settings.
The default Wi-Fi Passphrase and Admin Password are printed
on the label under the battery.
Reset the Wi-Fi Passphrase and Admin
Password
To reset your device to the default settings:
1. Press and hold the WPS button and the Power key for
5 seconds.
2. When prompted, press the Power key.
3. Reconnect your Wi-Fi devices.
Note: If you change your Wi-Fi Passphrase, you may need to
update the saved information in your laptop’s Wi-Fi / network
connection manager.
AirCard Watcher app
Download the complimentary AirCard Watcher app from
www.sierrawireless.com/AirCardApps.
Use this app to view your connection, settings, and data usage from your smartphone
or tablet. To manage all hotspot settings, go
to the homepage (http://aircard.hotspot).
5
Mobile Hotspot Homepage
To access your mobile hotspot homepage, connect to your
device, and in your browser, enter http://aircard.hotspot.
Log in with your Admin Password (swiadmin) to modify settings.
Note: Alternatively, you can enter the device IP address
http://192.168.1.1
On the homepage, you can:
• Change the SSID, Wi-Fi Passphrase, Admin Password, and
Wi-Fi encryption
• Set autoconnect options
• Set GPS options
• Use GPS to map or track your location and find nearby
amenities
• View data usage
• Set audio alerts
• View and change other settings
• Check device status
6
Check Your Data Usage
You have two options to view an estimate of your data usage.*
On the mobile hotspot LCD Dashboard:
1. Press the Navigation key to cycle through the screens. The
billing information screen shows your data usage.
Billing Info
Data used from: 2012/06/18
Data transferred: 4.23 MB*
Cycle restarts: 2012/07/01
ĂLJƐůĞŌ͗ϭϮĚĂLJƐ
* approximate
On the Homepage:
1. Go to http://aircard.hotspot.
2. Click the Session Data icon.
3. Optionally, set the billing cycle to match your data plan’s
billing date.
* Not accurate for billing purposes.
7
Connect Other Devices
Connect additional Wi-Fi capable devices:
1. Open the Wi-Fi network manager on your computer or other
Wi-Fi device (smartphones, tablets, media players,
cameras, etc.).
2. Select the mobile hotspot Wi-Fi network displayed on the
LCD screen (for example, AirCard-1234).
3. Enter the Wi-Fi Passphrase displayed on the LCD screen and
launch your browser.
Connect WPS Devices
WPS enables you to connect WPS-enabled devices to a Wi-Fi
network without the use of a keyboard. The WPS feature is
available on certain cameras, printers, smartphones, and
laptops.
1. Press the WPS button on your mobile hotspot.
2. Within 2 minutes, press the WPS button on the wireless
device you want to connect.
Your mobile hotspot and the wireless device will communicate
and establish the connection.
8
Use GPS
To view your GPS location:
1. Go to the AirCard Homepage (http://aircard.hotspot).
2. Log in as Administrator.
3. Click the GPS icon.
4. Click Get GPS Location (one-time) or Start GPS Tracking
(continuous).
5. To view your location on a map and search for nearby
amenities, click Map Me.
Reconnect to the Mobile
Broadband Network
By default, the mobile hotspot automatically connects to the
mobile broadband network. (When you are connected to the
mobile broadband network, the technology icon on the LCD
screen has a white background.)
If you need to reconnect to the mobile broadband network
manually, do one of the following:
• With the LCD main screen showing, press the Power key and
follow the on-screen prompts.
• Press the Navigation key repeatedly until you see the
Connect Info LCD screen, and follow the on-screen prompts.
• On the homepage, click the Connect button under the virtual
image of the mobile hotspot.
You can disconnect from the mobile broadband network from the
Connect Info LCD screen or the homepage. Powering off the
device also disconnects it from the mobile broadband network.
9
Create a profile
If you need to create a profile:
1. Go to the AirCard Homepage (http://aircard.hotspot).
2. Log in as Administrator.
3. Go to Advanced Settings > WAN > Setup.
4. Click Add / Edit Profiles.
5. Enter the information supplied by your service provider, and
click Save.
Frequently Asked Questions
How do I enter the PIN code on my SIM card?
If your service provider gave you a PIN for your SIM card:
1. Connect your computer to the mobile Wi-Fi network using the
credentials printed on the label under the battery.
2. Go to the homepage (http://aircard.hotspot).
3. Enter your Admin Password in the Admin Login field and click
login. (Default Admin Password is swiadmin)
4. When prompted, enter the SIM PIN and click Submit.
10
More Information
• Online Help — From the homepage, click the Help icon and
select Online Help.
• On the Internet — Additional support is available online at
www.sierrawireless.com/Support/Downloads.aspx
Caution: The Sierra Wireless Mobile Hotspot must be 1 cm
or more from users during operation. If an external antenna is
used, the antenna must be maintained at least 20 cm from users
during operation. Use only the external antennas available from
Sierra Wireless.
(See www.sierrawireless.com/accessories.)
11
Touche de navigation
Touche d’alimentation
Français
Découverte de votre appareil
Bouton WPS
Écran LCD
Port microUSB
Également fournis :
• Batterie lithium-ion
• Chargeur mural
• Câble USB
Boutons et touches
Verrouiller / déverrouiller le
point d’accès mobile
Appuyez sur la touche de navigation,
puis maintenez-la enfoncée pendant
3 secondes.
Activer / désactiver les
alertes audio
• Appuyez sur le bouton WPS et
sur la touche de navigation, puis
maintenez-les enfoncés pendant
3 secondes ou
• Appuyez sur la touche de navigation
pour accéder à l’écran LCD
Messages / Alertes, puis suivez les
invites.
Réinitialiser les paramètres
d’usine par défaut du
terminal
Appuyez sur le bouton WPS et sur la
touche d’alimentation, maintenez-les
enfoncés pendant 5 secondes, puis
suivez les invites de l’écran LCD.
12
Écran LCD de votre terminal
8
6
7
LTE
9
Réseau
10
SSID : AirCard-xxxx
Clé Wi-Fi : 12345678
WŽƵƌĐŽŶĮŐƵƌĞƌǀŽƚƌĞŚŽƚƐƉŽƚ͕
ĂĐĐĠĚĞnjăŚƩƉ͗ͬͬĂŝƌĐĂƌĚ͘ŚŽƚƐƉŽƚ
11
12
1
5
4
3
2
1
ϭϰ͘ϮDŽ
Intensité du signal
7 Batterie
2 Technologie du réseau
8 Icônes d’état
3
9 Nom de l’opérateur
Itinérance
4 Messages
10 SSID Wi-Fi
Voir à l’adresse
http://aircard.hotspot
5 GPS
11 URL de la page d’accueil de
6 Marche ou arrêt du Wi-Fi
12 Informations relatives
l’appareil l’accès mobile
Le chiffre indique le nombre
de terminaux connectés.
à l’utilisation des données
Appuyez sur la touche de navigation pour naviguer entre les fenêtres
suivantes :
• Informations de connexion (SSID Wi-Fi et clé Wi-Fi)
• Configuration WPS
• Messages / Alertes
• Utilisation des données / Informations de facturation
• Informations sur l’appareil / En savoir plus
13
Étape 1 : Installation du terminal
1. Faites glisser la carte SIM sous le couvercle, comme le montre
l’illustration.
2. Insérez la batterie comme qu’illustré. (La batterie s’installe facilement.
Si elle s’insère difficilement, vérifiez l’orientation. Ne forcez pas.)
Contacts dorés
Batterie
3. Replacez le couvercle arrière.
Votre point d’accès mobile AirCard est fourni avec une batterie partiellement chargée. Pour recharger la batterie, utilisez le câble USB pour fixer
le point d’accès mobile à :
• Une prise murale, à l’aide d’un adaptateur AC (option la plus rapide)
• Le port USB de votre ordinateur portable
14
Étape 2 : Connexion à Internet
1. Appuyez sur la touche d’alimentation,
puis maintenez-la enfoncée pendant
quelques secondes. Une fois sous tension,
le point d’accès mobile se connecte
automatiquement au réseau haut débit
mobile.
La première fois que vous allumez l’appareil, vous êtes invités à
sélectionner la langue de votre choix sur l’écran LCD. La langue peut
par la suite être changée de la page d’accueil de l’appareil.
2. L’écran LCD affiche le message « Branchez votre ordinateur au
réseau Wi-Fi », puis vous montre le SSID Wi-Fi (Nom du réseau)
et la clé Wi-Fi.
LTE
Réseau
SSID : AirCard-1234
Clé Wi-Fi : 12345678
WŽƵƌĐŽŶĮŐƵƌĞƌǀŽƚƌĞŚŽƚƐƉŽƚ͕
ĂĐĐĠĚĞnjăŚƩƉ͗ͬͬĂŝƌĐĂƌĚ͘ŚŽƚƐƉŽƚ
ϭϰ͘ϮDŽ
Remarque : l’écran LCD se met en mode veille afin d’économiser de
l’énergie. Pour activer l’écran LCD, appuyez sur la touche d’alimentation,
puis relâchez-la.
3. Sur votre ordinateur ou votre terminal mobile, ouvrez le gestionnaire
de connexion Wi-Fi / réseau.
4. Choisissez le SSID Wi-Fi affiché sur l’écran LCD.
5. Lorsque vous êtes invité(e) à le faire, entrez votre clé Wi-Fi, telle
qu’elle apparaît sur l’écran LCD.
Lorsque l’appareil est connecté à Internet, un « 1 » apparaît à côté de
l’icône Wi-Fi sur l’écran LCD.
6. Lancez votre navigateur et, si vous le souhaitez, allez sur
http://aircard.hotspot afin de personnaliser vos paramètres.
(Remarque : le point d’accès mobile est entièrement sécurisé
si vous utilisez ses paramètres de sécurité par défaut.)
7. Étape facultative : en fonction de votre fournisseur de services, vous
devrez éventuellement créer un profil d’utilisateur pour vous connecter
au haut débit mobile. Suivez les instructions de la page 21.
15
Informations relatives
à la sécurité
Clé Wi-Fi
• Utilisez-la pour connecter un terminal sans fil à votre réseau Wi-Fi.
• La clé Wi-Fi est indiquée sur l’écran LCD.
Mot de passe administrateur
• Votre mot de passe administrateur par défaut est swiadmin.
• Utilisez ce mot de passe pour vous connecter à la page d’accueil du
point d’accès mobile et effectuer des modifications telles que l’activation du GPS ou les changements de vos paramètres de sécurité.
La clé Wi-Fi par défaut et le mot de passe administrateur sont inscrits sur
l’étiquette collée sous la batterie.
Réinitialisation de la clé Wi-Fi et du mot
de passe administrateur
Pour restaurer les paramètres par défaut de votre le point d’accès mobile:
1. Appuyez sur le bouton WPS et sur la touche d’alimentation,
puis maintenez-les enfoncés pendant 5 secondes.
2. Lorsque vous y êtes invité, appuyez sur la touche d’alimentation.
3. Reconnectez vos terminaux Wi-Fi.
Remarque : si vous changez votre clé Wi-Fi, vous devrez éventuellement
actualiser l’information sauvegardée dans votre gestionnaire de
connexion au Wi-Fi / réseau de votre ordinateur portable.
AirCard Watcher app
Téléchargez l’app complémentaire AirCard Watcher de
www.sierrawireless.com/AirCardApps. Utilisez
l’app pour visualiser les paramètres de l’appareil,
utilisation de données et connectivité au reseau à
partir de votre téléphone sans fil ou tablette. Pour
gérer tous les parametres de l’appareil, allez sur
(http://aircard.hotspot).
16
Page d’accueil du point d’accès
mobile
Pour accéder à la page d’accueil de votre point d’accès mobile,
connectez votre point d’accès mobile puis, dans votre navigateur,
saisissez l’adresse suivante : http://aircard.hotspot. Connectez-vous
avec votre mot de passe administrateur (swiadmin) pour modifier les
paramètres.
Remarque : vous pouvez également saisir l’adresse IP de l’appareil
http://192.168.1.1
Sur la page d’accueil, vous pouvez :
• Modifier le SSID, la clé Wi-Fi, le mot de passe administrateur et
l’encodage Wi-Fi
• Définir les options de connexion automatique
• Configurer les options GPS
• Utiliser le GPS pour visualiser ou définir votre emplacement,
mais aussi pour trouver les équipements proches
• Afficher le niveau d’utilisation des données
• Définir des alertes audio
• Afficher et modifier d’autres paramètres
• Vérifier l’état du périphérique
17
Vérification de votre utilisation
des données
Deux options permettent d’afficher une estimation de votre utilisation
de données.*
Sur le tableau de bord de l’écran LCD :
1. Appuyez sur la touche de navigation pour naviguer entre les
fenêtres. L’écran Détails de facturation montre votre utilisation
des données.
/ŶĨŽƐĚĞĨĂĐƚƵƌĂƟŽŶ
ŽŶŶĠĞƐƵƟůŝƐĠĞƐĚĞƉƵŝƐ͗ϭϴͬϬϲͬϮϬϭϮ
ŽŶŶĠĞƐƚƌĂŶƐĨĠƌĠĞƐ͗ϰ͕ϮϯDŽΎ
ZĞĚĠŵĂƌƌĂŐĞƐĚĞĐLJĐůĞƐ͗ϬϭͬϬϳͬϮϬϭϮ
:ŽƵƌƐƌĞƐƚĂŶƚƐ͗ϭϮũŽƵƌƐ
ΎĞŶǀŝƌŽŶ
Sur la page d’accueil :
1. Allez sur http://aircard.hotspot.
2. Cliquez sur l’icône Données de session.
3. Vous avez la possibilité de configurer la période de facturation pour
qu’elle coïncide avec la date de facturation de votre forfait de données.
* À ne pas utiliser à des fins de facturation.
18
Connexion des terminaux
supplémentaires
Pour connecter des terminaux
supplémentaires compatibles
avec le Wi-Fi :
1. Ouvrez le gestionnaire de réseau Wi-Fi sur votre ordinateur ou autre
terminal Wi-Fi (smartphones, tablettes, lecteurs multimédias, terminal
photos, etc.).
2. Choisissez le réseau point d’accès Wi-Fi mobile affiché sur
l’écran LCD (par exemple, AirCard-1234).
3. Saisissez la clé Wi-Fi affichée sur l’écran LCD et lancez votre
navigateur.
Connexion des terminaux WPS
Le WPS vous permet de connecter des terminaux WPS à un réseau WiFi sans nécessiter de clavier. La fonction WPS est disponible sur certains
terminal photo, imprimantes, smartphones et ordinateurs portables.
1. Appuyez sur le bouton WPS de votre point d’accès mobile.
2. Vous avez 2 minutes pour appuyer sur le bouton WPS du terminal
sans fil que vous souhaitez connecter.
Votre point d’accès mobile et le terminal sans fil communiqueront et
établiront une connexion.
19
Utilisation du GPS
Pour voir votre localisation GPS :
1. Allez sur la Page d’accueil AirCard (http://aircard.hotspot).
2. Connectez-vous en tant qu’administrateur.
3. Cliquez sur l’icône GPS.
4. Cliquez sur Obtenir la localisation GPS (une fois) ou Commencer
le suivi GPS (continu).
5. Pour visualiser votre localisation sur une carte et rechercher des
commodités aux alentours, cliquez sur l’icône Afficher sur la carte.
Reconnexion au réseau haut
débit mobile
Par défaut, le point d’accès mobile se connecte automatiquement au
réseau haut débit mobile. (Quand vous êtes connecté au réseau haut
débit mobile, l’arrière-plan de l’icône de technologie de l’écran LCD est
blanc.)
Si vous devez vous reconnecter au réseau haut débit mobile manuellement, exécutez l’une des opérations suivantes :
• Avec l’écran LCD principal affiché, appuyez sur la touche
d’alimentation, puis suivez les invites.
• Appuyez sur la touche de navigation plusieurs fois jusqu’à ce que
vous voyiez Informations de connexion sur l’écran LCD, puis suivez
les invites.
• Dans la page d’accueil, cliquez sur le bouton de connexion sous
l’image virtuelle du point d’accès mobile.
Vous pouvez vous déconnecter du réseau haut débit mobile depuis
Informations de connexion sur l’écran LCD ou depuis la page d’accueil.
La mise hors tension du terminal le déconnecte également du réseau
haut débit mobile.
20
Création d’un profil
Si vous devez créer un profil :
1. Allez sur la Page d’accueil AirCard (http://aircard.hotspot).
2. Connectez-vous en tant qu’administrateur.
3. Allez sur Paramètres avancés > WAN > Configuration.
4. Cliquez sur Ajouter / Éditer des profils.
5. Saisissez les informations de votre fournisseur de services,
puis cliquez sur Enregistrer.
Foire aux questions
Comment saisir le code PIN sur ma carte SIM ?
Si votre fournisseur de services vous a fourni un code PIN pour votre
carte SIM :
1. Connectez votre ordinateur au réseau Wi-Fi mobile avec
les informations de sur l’étiquette située sous la batterie.
2. Accédez à la Page d’accueil (http://aircard.hotspot).
3. Saisissez votre mot de passe d’administrateur dans le champ
réservé à l’identifiant administrateur, puis cliquez sur Se connecter.
(Le mot de passe administrateur par défaut est swiadmin)
4. Lorsque vous y êtes invité, saisissez le code PIN de la carte SIM puis
cliquez sur Soumettre.
21
Pour plus d’informations
• Aide en ligne — Sur la Page d’accueil, cliquez sur Aide et choisissez
Aide en ligne.
• Sur Internet — Un support supplémentaire est disponible en ligne sur
www.sierrawireless.com/Support/Downloads.aspx
Attention : le point d’accès mobile Sierra Wireless doit être à au moins
1 cm des utilisateurs lors de son utilisation. Si une antenne externe est
utilisée, l’antenne doit être placée à au moins 20 cm de l’utilisateur lors
de son utilisation. N’utilisez que des antennes externes fournies par
Sierra Wireless.
(Reportez-vous à www.sierrawireless.com/accessories.)
22
© 2012 Sierra Wireless. All rights reserved.
AirCard is a registered trademark of Sierra Wireless.
Sierra Wireless and the Sierra Wireless logo are
trademarks of Sierra Wireless. All other marks
contained herein are the property of their respective
owners.
© 2012 Sierra Wireless. Tous droits réservés.
AirCard est une marque déposée de Sierra Wireless.
Sierra Wireless et le logo Sierra Wireless sont
des marques de Sierra Wireless. Toutes les autres
marques mentionnées dans le présent document
appartiennent à leur titulaire respectif.
2400231 Rev. 2

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement