New Holland TD5050 User's Manual

New Holland
TD Tractor Specifications
TD80D TD5050 TD5050 High-Clearance
MODEL
TD80D
TD5050
ENGINE
Type
4-cycle, diesel, naturally aspirated
4-cycle, diesel, turbo-charged
Number of cylinders
4
4
Displacement, cu. in. (L)
238 (3.9)
274 (4.5)
Gross engine horsepower, hp (kW)
72 (53)
93 (69.4)
PTO horsepower, hp (kW)
62 (46.2)
80 (59.7)
Rated speed, RPM ....................................................................................................................................2500..........................................................................................................
Maximum torque
206 ft.-lbs. @ 1500 RPM
288 ft.-lbs. @ 1300 RPM
Torque rise
28%
44%
Fuel type ...........................................................................................B20 Biodiesel (meeting ASTM 6751 standards) and/or standard diesel fuels .................................................
Air filter..................................................................................Dual element, dry type with cleanable outer element and replaceable inner safety element ......................................
Lubrication..........................................................................................Full flow, pressure lubrication with vertical mount spin-on filter cartridge....................................................
Oil & filter change interval....................................................................................................................300 hours......................................................................................................
Starting aid..........................................................................................................................................Thermostart ...................................................................................................
Throttle....................................................................................................................................Hand and/or foot controlled........................................................................................
Exhaust .....................................................................................Under hood muffler w/ vertical exhaust pipe, optional under-slung horizontal exhaust..........................................
Emissionization standard
Tier-II
Tier-III
Fuel tank capacity, gal. (L) ...................................................................................................................23.8 (90.1).....................................................................................................
TRANSMISSION
Base on standard tractor ........................12Fx12R with synchronized mechanical shuttle (4 synchronized speeds in 3 constant mesh ranges, dedicated left hand shuttle)........
Optional transmission.......................................................................................20Fx12R creeper with synchronized mechanical shuttle..................................................................
(4 synchronized speeds in 3 non-synchronized ranges, creeper operates in lower 2 ranges)
Traction clutch, in. (mm)
Dry 11 (279.4) diameter heavy duty
Dry 12 (304.8) diameter heavy duty organic plate cerametallic plate
Ground speed*, mph (kph) .............................................Base transmission: Forward - 1.05 to 17.3 (1.69 to 27.8), Reverse - 1.02 to 16.9 (1.64 to 27.2).................................
.....................................................................................Optional creeper transmission: Additional 8 forward speeds between 0.2 - 1.9 (.322 - 3.06).....................................
Rear axle, in. (cm)...........................................................................................................59 - 79 (150 - 201) track adjustment ................................................................................
Rear differential lock .........................................................................................................Mechanical foot pedal engagement..................................................................................
Service brakes ..............................................................................................Hydraulically assisted wet disc, self-adjusting and equalizing .............................................................
Parking brake............................................................................................................Hand-lever engagement, locks service brakes..........................................................................
HYDRAULICS
System type ...............................................................................................................Open center, fixed displacement gear pump ...........................................................................
System pressure, psi (bar)..................................................................................................................2,755 (190) ....................................................................................................
Implement pump capacity, gpm (l/m)
13.6 (51.5)
17.2 (65.1)
Steering & services system, gpm (l/m)
Hydrostatic power steering
9.2 (34.8)
w/dedicated gear pump - 8.1 (30.1)
Total maximum tractor flow, gpm (l/m)
21.7 (82.1)
26.4 (99.9)
Remote valves - standard .......................................................1 open center, rear mounted, color coded lever controls with quick coupler dust covers........................................
Remote valves - optional ...................................................Up to 3 open center, rear mounted, color coded lever controls with quick coupler dust covers...................................
2 valve open center loader control valve, joystick controlled (needed for loader operations)
3-POINT HITCH
Rear .......................................................................................................................................................Standard.......................................................................................................
Category.......................................................................................................................................................II.............................................................................................................
Position control / draft sensing ......................Two levers w/ ability to blend draft and position control / mechanical, lower link sensing w/ hydraulic position control................
Lower link ends.......................................................................................................................................Flexible........................................................................................................
Stabilizers .............................................................................................................................................Telescopic......................................................................................................
ASAE lift capacity @ 24 in., lbs. (kg) .................................................................................................5,025 (2280) ...................................................................................................
Fast raise / lower control......................................................................Standard equipment, mechanical push button with finger-tip operation .....................................................
Upper limit regulation......................................................................Standard equipment, adjustable mechanical stop limit on hitch upper lift arm ................................................
Page 1 of 3
New Holland
TD Tractor Specifications
TD80D TD5050 TD5050 High-Clearance
MODEL
TD80D
TD5050
PTO
Rear ................................................................................................................................Standard, w/ flip-up PTO shaft guard ................................................................................
Clutch type ...........................................................................................................................Independent, dry, organic plate.....................................................................................
Clutch diameter, in. (mm)
11 (279.4) 12 (304.8)
Engagement.....................................................................................................................Single lever, mechanical engagement ................................................................................
Speed, RPM
540
540 (540/1000 optional)
FRONT AXLE
2WD, track adjustment, in. (cm) ............................................................................Heavy duty, adjustable, 55 - 75 (139.7 - 190.5) ........................................................................
Maximum turn angle, degrees....................................................................................................................55............................................................................................................
FWD, track adjustment, in. (cm) ...............................................Center differential with planetary final drives in wheel hubs, 61 - 78 (154.9 - 198.1) ...........................................
Maximum wheel turn angle, degrees (FWD)..............................................................................................50............................................................................................................
Front differential lock...........................................................................................................................Limited slip.....................................................................................................
FWD clutch engagement.......................................................................................................Mechanical lever engagement ......................................................................................
ELECTRICAL
Alternator..........................................................................................................................................12 volt, 65 amp .................................................................................................
Battery capacity (cold cranking amps) ......................................................................................................800...........................................................................................................
Lighting ..................................................................................2 hi/lo beam headlights, 1 rear worklight, brake lights, flashing safety lights/turn signals
(cab has 2 additional front worklights and 1 additional rear worklight)
Accessory power outlets.......................................................Standard equipment, 7-pin implement outlet, 4-pin (25 Amp) outlet, 1-pin (8 Amp) outlet ......................................
Fuses...........................................................................................................................................Automotive blade type............................................................................................
APPROXIMATE SHIPPING WEIGHT
ROPS - 2WD / FWD, lb. (kg)
CAB - 2WD / FWD, lb. (kg)
5,702 / 6,254 (2586 / 2837)
6,363 / 6,915 (2886 / 3137)
6,107 / 6,659 (2770 / 3021)
6,768 / 7,320 (3070 / 3320)
101.1 (2568)*
103.1 (2619)*
101.1 (2568)*
103.1 (2619)*
91 (2311)
87 (2209)
94 (2387)
92 (2336)
APPROXIMATE DIMENSIONS
Height to Top of ROPS, in. (mm)
Height to Top of cab, in. (mm)
WHEELBASE
2WD, in. (mm)
FWD, in. (mm)
†Manufacturer's estimate
*measured with 16.9x30 rear tires
Page 2 of 3
New Holland
TD Tractor Specifications
TD80D TD5050 TD5050 High-Clearance
MODEL
ENGINE†
Type
Number of cylinders
Displacement, cu. in. (L)
Gross engine horsepower, hp (kW)
PTO horsepower, hp (kW)
Rated speed, RPM
Maximum torque
Torque rise, %
Fuel type
Air filter
Lubrication
Oil & filter change interval, hours
Starting aid
Throttle
Exhaust
Emissionization standard
Fuel tank capacity, gallons (L)
TRANSMISSION
Standard transmission
Traction clutch
Ground speed*, mph
Rear differential lock
Service brakes
Parking brake
HYDRAULICS
System type
System pressure, psi
Implement pump capacity,
gpm (L/min)
Steering & services system
Total maximum tractor flow,
gpm (L/min)
Remote valves - standard
Remote valves - optional
TD5050 High-Clearance
4-cycle, diesel, turbocharged intercooled
4
274 (4.5)
90 (67)
80 (59.7)
2500
346 ft.-lbs. @ 1500 RPM
44
100% Biodiesel approved (meeting ASTM
6751 standards, see your New Holland dealer
for guidelines) and/or standard diesel fuels
Dual element, dry type with cleanable outer
element and replaceable inner safety element
Full flow, pressure lubrication with
vertical mount spin-on filter cartridge
300
Thermostart
Hand and/or foot controlled
Under hood muffler w/ vertical exhaust pipe,
optional under-slung horizontal exhaust
US EPA Tier III
31 (118)
20Fx12R creeper with synchronized mechanical
shuttle (4 synchronized gears and 3 ranges,
creeper operates in lower 2 ranges)
Dry 12 inch diameter heavy duty cerametallic plate
Forward: 0.15-17.5
Reverse: 1.01-16.8
Two creeper ranges provide minimum
groundspeed of 13.1 ft./min. (400 cm/min.)
at 2,500 egine RPM
Mechanical foot pedal engagement
Individual hydraulic wet disc, self-adjusting
and equalizing
Hand-lever engagement, locks service brakes
Open center, fixed displacement gear pump
2,755
16.1 (61)
Hydrostatic power steering w/dedicated gear
pump - 7 gpm (26.5 L/min)
23.1 (87.5)
1 open center, rear mounted, color coded lever
controls with quick coupler dust covers
Up to 3 open center, rear mounted, color coded
lever controls with quick coupler dust covers
MODEL
3-POINT HITCH
REAR
Category
Position control / draft sensing
TD5050 High-Clearance
Standard
II
Two levers w/ ability to blend draft and position
control / mechanical, lower link sensing w/
hydraulic position control
Lower link ends
Flexible
Stabilizers
Telescopic
ASAE lift capacity @ 24 in., lbs. (kg) 5,025 (2279)
Fast raise / lower control
Standard Lift-O-Matic, mechanical push button
with finger-tip operation
Upper limit regulation
Standard equipment, adjustable mechanical
stop limit on hitch upper lift arm
PTO
REAR
Clutch type
Clutch diameter, in. (mm)
Engagement
Speed
ELECTRICAL
Alternator
Battery capacity
(cold cranking amps)
Lighting
Accessory power outlets
Fuses
Standard, w/ flip-up PTO shaft guard
Independent, dry, organic plate
12 (305)
Single lever, mechanical engagement
540 RPM (540/1000 optional)
12 volt, 120 amp
800
2 hi/lo beam headlights, 1 rear worklight, brake
lights, flashing safety lights/turn signals
Standard equipment, 7-pin implement outlet,
4-pin (25 Amp) outlet, 1-pin (8 Amp) outlet
Automotive blade type
APPROXIMATE SHIPPING WEIGHT
ROPS - 2WD / FWD, lbs. (kg)
7,888 / 8,818 (3578 / 4000)
APPROXIMATE DIMENSIONS
Height to top of ROPS, in. (mm)
115.7 (2940)*
WHEELBASE
2WD, in. (mm)
FWD, in. (mm)
2WD, in. (mm)
FWD, in. (mm)
89.7 (2278) – narrow axle
87.5 (2222) – narrow axle
85.3 (2168) – wide axle
83.1 (2112) – wide axle
TRACK WIDTH
Rear without spacers, in. (mm)
Rear with spacers, in. (mm)
Front 2WD, in. (mm)
Front 4WD, in. (mm)
Minimum
59.2 (1504)
72.2 (1834)
61.6 (1566)
61.7 (1569)
Maximum
79.6 (2021)
83.8 (2130)
77.4 (1966)
81.9 (2082)
†
Manufacturer's estimate
*measured with 320/80R42 tires
Visit our Web site at www.newholland.com/na. Or, call toll-free 866-NEW-HLND (866-639-4563).
Design, materials and/or specifications are subject to
change without notice and without liability therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
var y outside these areas.
© 2009 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Safety begins with a thorough understanding of
the equipment. Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention to all safety and operating
decals and never operate machinery
without all shields, protective devices
and structures in place.
Page 3 of 3