Nikon COOLPIX S6 User's Manual

Add to my manuals
119 Pages

advertisement

Nikon COOLPIX S6 User's Manual | Manualzz
%N
4HE.IKON'UIDETO$IGITAL0HOTOGRAPHY
WITHTHE
$)')4!,#!-%2!
Trademark Information
Macintosh, Mac OS, and QuickTime are registered trademarks of Apple Computer, Inc. Microsoft and
Windows are registered trademarks of Microsoft Corporation. The SD logo is a trademark of the SD Card
Association. Adobe and Acrobat are registered trademarks of Adobe Systems Inc. ImageLink and the ImageLink print system logo are trademarks of Eastman Kodak Company. Pictmotion is powered by muvee
Technologies. PictBridge is a trademark. D-Lighting technology is provided by Apical Limited. Facepriority AF technology is provided by Identix®. All other trade names mentioned in this manual or the
other documentation provided with your Nikon product are trademarks or registered trademarks of their
respective holders.
Symbols and Conventions
To make it easier to find the information you need,
the following symbols and conventions are used:
This icon marks cautions, information that
should be read before use to prevent damage to the camera.
This icon marks notes, information that
should be read before using the camera.
This icon marks tips, additional information
that may be helpful when using the camera.
This icon indicates that more information is
available elsewhere in this manual or in the
Quick Start Guide.
Introduction
First Steps
Camera Operations
Basic Photography and
Playback
Scene and Scene Assist
Modes
Movies
Voice Recordings
Viewing Pictures on the
Camera
Connecting to Televisions,
Computers, and Printers
Memory Cards
Pictures taken with this camera can be stored in the
camera’s internal memory or on removable memory
cards. If a memory card is inserted, all new pictures
will be stored on the memory card and delete, playback, and format operations will apply only to the
pictures on the memory card. The memory card
must be removed before the internal memory can
be formatted or used to store, delete, or view pictures.
Wireless Transfer and
Printing
Menu Guide
Technical Notes
i
For Your Safety
To prevent damage to your Nikon product or injury to yourself or to others, read
the following safety precautions in their entirety before using this equipment. Keep
these safety instructions where all those who use the product will read them.
The consequences that could result from failure to observe the precautions listed in
this section are indicated by the following symbol:
This icon marks warnings, information that should be read before using this Nikon
product to prevent possible injury.
WARNINGS
Turn off in the event of malfunction
Should you notice smoke or an unusual
smell coming from the camera or AC adapter, unplug the AC adapter and remove the
battery immediately, taking care to avoid
burns. Continued operation could result
in injury. After removing or disconnecting
the power source, take the equipment to
a Nikon-authorized service representative
for inspection.
Do not disassemble
Touching the internal parts of the camera
or AC adapter could result in injury. Repairs should be performed only by qualified technicians. Should the camera or
AC adapter break open as the result of a
fall or other accident, take the product to
a Nikon-authorized service representative
for inspection after unplugging the product and/or removing the battery.
Do not use the camera or AC adapter in the presence of flammable gas
Do not use electronic equipment in the
presence of flammable gas, as this could
result in explosion or fire.
Handle the camera strap with care
Never place the strap around the neck of
an infant or child.
Keep out of reach of children
Particular care should be taken to prevent
infants from putting the batteries or other
small parts into their mouths.
ii
•
•
•
•
•
•
•
•
•
•
Observe caution when handling batteries
Batteries may leak or explode if improperly
handled. Observe the following precautions when handling batteries for use in
this product:
Before replacing the battery, turn the product off. If you are using the AC adapter, be
sure it is unplugged.
Use only rechargeable Nikon EN-EL8 lithium-ion batteries (supplied). Charge the
battery either by inserting it in the camera
and connecting the supplied AC adapter,
or by inserting it in a MH-62 battery charger
(available separately).
When inserting the battery, do not attempt
to insert it upside down or backwards.
Do not short or disassemble batteries.
Do not expose batteries to flame or to excessive heat.
Do not immerse in or expose to water.
Replace the terminal cover when transporting the battery. Do not transport or
store with metal objects such as necklaces
or hairpins.
Batteries are prone to leakage when fully
discharged. To avoid damage to the product, be sure to remove the battery when no
charge remains.
Discontinue use immediately should you
notice any change in the battery, such as
discoloration or deformation.
If liquid from damaged batteries comes in
contact with clothing or skin, rinse immediately with plenty of water.
•
•
•
•
•
•
Observe the following precautions when handling
the AC adapter
Use only adapters designated for use with
this product.
Keep dry. Failure to observe this precaution could result in fire or electric shock.
Dust on or near the metal parts of the plug
should be removed with a dry cloth. Continued use could result in fire.
Do not handle the power cable or go near
the adapter during thunderstorms. Failure
to observe this precaution could result in
electric shock.
Do not damage, modify, forcibly tug or
bend the power cable, place it under
heavy objects, or expose it to heat or flame.
Should the insulation be damaged and the
wires become exposed, take it to a Nikonauthorized service representative for inspection. Failure to observe these precautions could result in fire or electric shock.
Do not handle the plug or battery charger
with wet hands. Failure to observe this precaution could result in electric shock.
Follow the instructions of hospital and airline personnel
This device emits radio frequency radiation
that could interfere with medical or navigational equipment. Do not use this device in
a hospital or on board an airplane without
first obtaining the permission of hospital or
airline staff.
Use appropriate cables
When connecting cables to the input and
output jacks, use only the cables provided
or sold by Nikon for the purpose, to maintain compliance with product regulations.
Handle moving parts with care
Be careful that your fingers or other objects
are not pinched by the lens cover or other
moving parts.
CD-ROMs
The CD-ROMs supplied with this device
should not be played back on audio CD
equipment. Playing CD-ROMs on an audio
CD player could cause hearing loss or damage the equipment.
Observe caution when operating the flash
Using the flash close to your subject’s eyes
could cause temporary visual impairment.
Particular care should be observed if photographing infants, when the flash should
be no less than one meter (39 in.) from the
subject.
Do not fire the flash while it is touching a person
or object
Such use can result in the person being
burned, and/or their clothes igniting from
the heat of the flash.
Avoid contact with liquid crystal
Should the monitor break, care should be
taken to avoid injury due to broken glass
and to prevent liquid crystal from the monitor touching the skin or entering the eyes
or mouth.
Notices
• No part of the manuals included with this product may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any
language in any form, by any means, without
Nikon’s prior written permission.
• Nikon reserves the right to change the specifications
of the hardware and software described in these
manuals at any time and without prior notice.
• Nikon will not be held liable for any damages resulting from the use of this product.
• While every effort has been made to ensure that
the information in these manuals is accurate and
complete, we would appreciate it were you to
bring any errors or omissions to the attention of
the Nikon representative in your area (address provided separately).
iii
This product, which contains encryption software developed in the United States, is controlled by the
United States Export Administration Regulations and may not be exported or re-exported to any country
to which the United States embargoes goods. As of November 2005 the following countries were subject
to embargo: Cuba, Iran, North Korea, Libya, Sudan, and Syria.
Notice for Customers in the U.S.A.
U.S.A. Federal Communications Commission (FCC) Declaration of Conformity
This device complies with Part 15 of the FCC rules. Operation of the device is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Products that contain a radio transmitter are labeled
with FCC ID and may also carry the FCC logo.
COOLPIX S6
FCC Radio Frequency Interference Statement
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / television technician for help.
CAUTIONS
Modifications
The FCC requires the user to be notified that any
changes or modifications made to this device that are
not expressly approved by Nikon Corporation may
void the user’s authority to operate the equipment.
Interface Cables
Use the interface cables sold or provided by Nikon for
your equipment. Using other interface cables may
exceed the limits of Class B Part 15 of the FCC rules.
iv
FCC Radiation Exposure Statement
The available scientific evidence does not show that
any health problems are associated with using low
power wireless devices. There is no proof, however,
that these low power wireless devices are absolutely safe. Low power wireless devices emit low
levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels
of RF can produce health effects (by heating tissue),
exposure to low-level RF that does not produce
heating effects causes no known adverse health
effects. Many studies of low-level RF exposures
have not found any biological effects. Some studies
have suggested that some biological effects might
occur, but such findings have not been confirmed
by additional research. This digital camera (the
COOLPIX S6) has been tested and found to comply
with FCC radiation exposure limits set forth for an
uncontrolled equipment and meets the FCC radio
frequency (RF) Exposure Guidelines in Supplement
C to OET65. The maximum SAR levels tested for this
digital camera (the COOLPIX S6) has been shown to
be 0.094 W/kg at body.
This device should not be co-located or operated in
conjunction with any other antenna or transmitter.
Notice for customers in the State of California
WARNING: Handling the cord on this product will expose you to lead, a chemical known to the State of
California to cause birth defects or other reproductive harm. Wash hands after handling.
Nikon Inc.,
1300 Walt Whitman Road, Melville, New York
11747-3064, U.S.A.
Tel.: 631-547-4200
Notice for Customers in Canada
CAUTION
ATTENTION
This class B digital apparatus meets all requirements Cet appareil numérique de la classe B respecte
of the Canadian Interference Causing Equipment toutes les exigences du Règlement sur le matériel
Regulations.
brouilleur du Canada.
RSS-GEN Exposure of Humans to RF Fields
The installer of this radio equipment must ensure that the antenna is located or pointed such that it does
not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website at www.hc-sc.gc.ca/rpb.
Notice for customers in Europe
Hereby, Nikon, declares that this digital camera is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
Symbol for Separate Collection in European Countries
This symbol indicates that this product is to be collected separately.
The following apply only to users in European countries:
• This product is designated for separate collection at an appropriate collection point. Do not
dispose of as household waste.
• For more information, contact the retailer or the local authorities in charge of waste management.
Disposing of Data Storage Devices
Please note that deleting images or formatting data storage devices such as memory cards or built-in camera memory does not completely erase the original image data. Deleted files can sometimes be recovered
from discarded storage devices using commercially available software, potentially resulting in the malicious
use of personal image data. Ensuring the privacy of such data is the user’s responsibility.
Before discarding a data storage device or transferring ownership to another person, erase all data using
commercial deletion software, or format the device and then completely refill it with images containing no
private information (for example, pictures of empty sky). Be sure to also replace any pictures selected for
the welcome screen. Care should be taken to avoid injury or damage to property when physically destroying data storage devices.
Notice Concerning Prohibition of Copying or Reproduction
Note that simply being in possession of material that has been digitally copied or reproduced by means of
a scanner, digital camera or other device may be punishable by law.
• Items prohibited by law from being copied or reproduced
Do not copy or reproduce paper money, coins, securities, government bonds, or local government
bonds, even if such copies or reproductions are
stamped “Sample.”
The copying or reproduction of paper money,
coins, or securities which are circulated in a foreign
country is prohibited.
Unless the prior permission of the government
has been obtained, the copying or reproduction
of unused postage stamps or post cards issued by
the government is prohibited.
The copying or reproduction of stamps issued by
the government and of certified documents stipulated by law is prohibited.
• Cautions on certain copies and reproductions
The government has issued cautions on copies or
reproductions of securities issued by private companies (shares, bills, checks, gift certificates, etc.),
commuter passes, or coupon tickets, except when
a minimum of necessary copies are to be provided
for business use by a company. Also, do not copy
or reproduce passports issued by the government,
licenses issued by public agencies and private
groups, ID cards, and tickets, such as passes and
meal coupons.
• Comply with copyright notices
The copying or reproduction of copyrighted
creative works such as books, music, paintings,
woodcut prints, maps, drawings, movies, and
photographs is governed by national and international copyright laws. Do not use this product for
the purpose of making illegal copies or to infringe
copyright laws.
v
Table of Contents
For Your Safety ............................................................................................................................................. ii
Notices ............................................................................................................................................................ iii
Introduction
1
Parts of the Camera ..................................................................................................................................... 2
The Monitor ................................................................................................................................................... 6
The COOL-STATION and AC Adapter ..................................................................................................... 8
First Steps
10
Inserting the Battery .................................................................................................................................10
Charging the Battery ................................................................................................................................11
Inserting Memory Cards ..........................................................................................................................12
Camera Operations
14
Turning the Camera on and Off ............................................................................................................14
Zoom ..............................................................................................................................................................15
Focus and Shutter Release......................................................................................................................16
Using Menus ................................................................................................................................................17
Basic Photography and Playback
18
Mode .......................................................................................................................................................18
Viewing Pictures .........................................................................................................................................19
Using the Flash ...........................................................................................................................................20
Taking Pictures with the Self-Timer .....................................................................................................22
Macro Close-up Mode ..............................................................................................................................23
One-Touch Portrait Mode .......................................................................................................................24
Scene and Scene Assist Modes
26
Scene Mode .................................................................................................................................................26
Scene Assist Mode .....................................................................................................................................32
Movies
35
Recording Movies ......................................................................................................................................35
The Movie Menu ........................................................................................................................................36
Movie Playback ...........................................................................................................................................38
Voice Recordings
39
Viewing Pictures on the Camera
43
Viewing Multiple Pictures: Thumbnail Playback ............................................................................................43
Deleting Pictures ...............................................................................................................................................................43
Taking a Closer Look: Playback Zoom ..................................................................................................................44
Creating a Cropped Copy ............................................................................................................................................44
Enhancing Contrast: D-Lighting ..............................................................................................................................45
Voice Memos: Recording and Playback ..............................................................................................................46
Viewing Pictures by Date .............................................................................................................................................47
Pictmotion by muvee ....................................................................................................................................................50
vi
Connecting to Televisions, Computers, and Printers
54
Viewing Pictures on TV ............................................................................................................................54
Viewing Pictures on a Computer ..........................................................................................................54
Printing Pictures Via USB .........................................................................................................................57
Wireless Transfer and Printing
63
Connecting to a Wireless Network ......................................................................................................63
Wireless Transfer .........................................................................................................................................71
Wireless Printing.........................................................................................................................................73
Menu Guide
74
Shooting Options: The Shooting Menu .............................................................................................74
Image Mode ........................................................................................................................................................................74
White Balance .....................................................................................................................................................................75
Exp. +/– ...................................................................................................................................................................................76
Continuous ...........................................................................................................................................................................76
Best Shot Selector (BSS) ................................................................................................................................................78
Sensitivity ...............................................................................................................................................................................78
Color Options ......................................................................................................................................................................79
AF Area Mode .....................................................................................................................................................................79
Playback Options: The Playback Menu ..............................................................................................80
Print Set ...................................................................................................................................................................................80
Slide Show.............................................................................................................................................................................81
Delete .......................................................................................................................................................................................81
Protect .....................................................................................................................................................................................81
Transfer Marking ................................................................................................................................................................81
Small Pic..................................................................................................................................................................................82
Copy ..........................................................................................................................................................................................82
Basic Camera Setup: The Setup Menu ................................................................................................83
Menus ......................................................................................................................................................................................83
Quick Startup.......................................................................................................................................................................83
Welcome Screen ...............................................................................................................................................................84
Date ...........................................................................................................................................................................................84
Monitor Settings................................................................................................................................................................86
Date Imprint.........................................................................................................................................................................87
AF Assist ..................................................................................................................................................................................88
Sound Settings ...................................................................................................................................................................88
Blur Warning ........................................................................................................................................................................88
Auto Off ..................................................................................................................................................................................88
Format Memory/Format Card ..................................................................................................................................89
Language ...............................................................................................................................................................................89
Interface..................................................................................................................................................................................89
Reset all ...................................................................................................................................................................................89
Firmware Version ...............................................................................................................................................................89
vii
Technical Notes
90
Optional Accessories ................................................................................................................................90
Caring for the Camera ..............................................................................................................................91
Error Messages ............................................................................................................................................93
Troubleshooting .........................................................................................................................................96
Appendix ................................................................................................................................................... 100
Specifications ........................................................................................................................................... 104
Index ............................................................................................................................................................ 107
Use Only Nikon Brand Electronic Accessories
Nikon COOLPIX cameras are designed to the highest standards and include complex electronic circuitry. Only Nikon brand electronic accessories (including battery chargers, batteries, and AC adapters) certified by Nikon specifically for use with this Nikon digital camera
are engineered and proven to operate within the operational and safety requirements of
this electronic circuitry.
THE USE OF NON-NIKON ELECTRONIC ACCESSORIES COULD DAMAGE THE CAMERA AND MAY VOID YOUR NIKON WARRANTY.
For more information about Nikon brand accessories, contact a local authorized Nikon
dealer.
* Holographic seal: Identifies this
device as an authentic Nikon
product.
viii
EN-EL8
rechargeable
battery
Introduction
Before Taking Important Pictures
Before taking pictures on important occasions (such as at weddings or before taking the camera on a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not
be held liable for damages or lost profits that may result from product malfunction.
Life-Long Learning
As part of Nikon’s “Life-Long Learning” commitment to ongoing product support and education, continually-updated information is available on-line at the following sites:
• For users in the U.S.A.: http://www.nikonusa.com/
• For users in Europe and Africa: http://www.europe-nikon.com/support
• For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/
Visit these sites to keep up-to-date with the latest product information, tips, answers to frequently-asked questions (FAQs), and general advice on digital imaging and photography. Additional information may be available from the Nikon representative in your area. See the URL
below for contact information:
http://nikonimaging.com/
1
Introduction
Thank you for your purchase of a Nikon COOLPIX S6 digital camera. This manual
has been written to help you enjoy taking pictures with your Nikon digital camera.
Please be sure to read all instructions thoroughly to get the most from the camera,
and keep them where they will be read by all those who use the product.
Parts of the Camera
Built-in flash (
20)
Self-timer lamp ( 22)
AF-assist illuminator (LED;
Introduction
Lens (
21)
Antenna
( 63)
92)
Lens cover closed
Wireless LED
( 72)
Lens cover
Speaker ( 38,
41, 46, 51, 53)
Microphone
( 35, 39, 46)
Power switch
( 14)
(One-touch portrait) button ( 24).
See also
(D-lighting; 45)
2
Power-on lamp
( 14)
Shutter-release
button ( 16)
Zoom control ( 15). See also:
•
(thumbnail playback): 43
• (playback zoom): 44
•
(help): 17
Monitor (
6–7, 91, 92)
(
(menu) button
17, 74, 80, 83)
(shooting/playback)
button ( 19, 43)
(mode) button (
5, 17)
Introduction
Indicator lamp ( 11, 16,
36, 39, 77)
Flash lamp ( 20)
Eyelet for camera strap
(
(delete) button
19, 43, 44)
Rotary multi selector
( 4, 17)
(center) button ( 4, 17)
(transfer) button ( 55)
Battery-chamber/memory
card slot cover ( 10, 12)
Battery latch (
10)
Memory card slot (
12)
Tripod socket
Battery chamber (
Multi connector (
Attaching the Camera Strap
Attach the strap as 햲
shown at right.
10)
8, 54, 55, 58, 62, 65)
햳
햴
3
The Rotary Multi Selector
The rotary multi selector is used to navigate the camera menus. Rotate in either direction
to highlight items and press the center ( ) to select. To cancel and return to the previous
menu, press the rotary multi selector to the left.
Introduction
Rotate: highlight
Press center ( ): select
Press left: cancel
Items can also be highlighted by pressing the rotary multi selector up, down, left, or
right.
Press up or down
Press right
Menu Help
For help on the current menu or menu item, press the zoom control to T ( ;
4
17).
The
(Mode) Button
Pressing the
button during shooting or playback displays a mode-selection menu
( 17).
Shooting Modes
Auto (
70)
Movie (
35)
Voice recording (
39)
Scene (
Introduction
Wireless (
18)
26)
Scene assist (
32)
Playback Modes
Playback (
43)
Voice playback (
41)
Pictmotion (
List by date (
48)
Calendar (
50)
47)
5
The Monitor
The following indicators may appear in the monitor during shooting and playback
(actual display varies with current camera settings):
Shooting
Introduction
Playback
100NIKON 1
9999.JPG 2
18 01.01.2006
17 00:00
3
4
16
15
14
5
9999 / 9999
11
9
12
13
6
10
Start
8
0h00m00s
6
7
13 Time zone indicator..........................................84
14 Date imprint / date counter ..........................87
15 Number of exposures
remaining ....................................................14, 102
Movie length .............................................35, 102
16 Focus areas.....................................................16, 79
17 Image mode .........................................................74
18 Exposure compensation ...............25, 31, 76
19 Electronic VR indicator ....................................37
20 Color option ..........................................................79
21 White balance ......................................................75
22 Best Shot Selector (BSS) .................................78
23 Continuous shooting mode .......................76
1 Current folder* ...................................................103
2 File number and type*..................................103
3 Internal memory / memory card
indicator...................................................................14
4 Battery level indicator .....................................14
5 Volume indicator ................................38, 41, 46
6 Voice memo recording guide ....................46
7 Voice memo playback guide ......................46
8 Current frame number /
total number of frames
Movie length ........................................................38
9 D-Lighting icon ...................................................45
10 Movie playback indicator ..............................38
11 Image mode .........................................................74
12 Movie indicator ...................................................38
13 Small picture indicator ...................................82
14 Protect icon ...........................................................81
15 Print icon .................................................................61
16 Transfer icon .................................. 55, 71, 81, 89
17 Time of recording* .............................................84
18 Date of recording*..............................................84
* Display differs in calendar and list-by-date modes (
49).
7
Introduction
1 Shooting mode ..............................5, 18, 26, 35
2 Exposure lock .......................................................29
3 Macro close-up mode ............................23, 28
4 Zoom indicator............................................15, 23
5 Focus indicator ....................................................16
6 Flash mode ............................................................20
7 Camera shake icon ............................................21
8 Internal memory / memory card
indicator...................................................................14
9 Battery level indicator .....................................14
10 Sensitivity ........................................................21, 78
11 Self-timer indicator/count down .............22
12 “Date not set” indicator ..................................93
The COOL-STATION and AC Adapter
The COOL-STATION
Introduction
The supplied MV-15 COOL-STATION can be used to:
• Copy pictures to a computer ( 54)
• Charge the camera battery ( 11)
• View pictures on a television ( 54)
• Print pictures via direct USB connection ( 57)
DC-IN connector
( 9)
Camera connector
USB connector
( 55, 58)
Placing the Camera in the COOL-STATION
Removing the Camera
The multi connector
should be fully inserted
in the COOL-STATION
camera connector as
shown.
8
Audio / video connector
(A /V out; 54)
Remove the camera
as shown.
The AC Adapter
COOL-STATION
햳
햵
햴
Camera
햲
9
Introduction
The supplied EH-64 AC adapter can charge the battery in the camera ( 11) or
power the camera for playback, data transfer, or printing (do not use any other
make or model of AC adapter; failure to observe this precaution could result in fire
or product malfunction). Connect the power cord (햲
햲) and plug the adapter into
the COOL-STATION or camera (햳
햳), making sure the plugs are in the correct orientation. Plug the adapter in (햴
햴) and check that the power lamp is lit (햵
햵).
First Steps
Inserting the Battery
The camera uses a rechargeable EN-EL8 Li-ion battery (supplied).
First Steps
1
Turn the camera off
If the power-on lamp is lit, press the power switch
to turn the camera off.
2
Open the battery-chamber/memory card slot
cover
3
Insert the battery
The orange battery latch is pushed aside as the
battery is inserted. The battery is fully inserted
when the latch clicks back into place.
Inserting the Battery
Inserting the battery upside down or backwards could
damage the camera. Check to be sure the battery is in
the correct orientation.
4
�
Close the battery-chamber/memory card slot
cover
�
Batteries
Read and follow the warnings and cautions on pages ii–iii and 92 of this manual.
Removing the Battery
Turn the camera off before removing or inserting batteries. To
eject the battery, open the battery-chamber/memory card
slot cover and slide the battery latch in the direction shown.
The battery can then be removed by hand. Note that the battery may become hot during use; observe due caution when
removing the battery.
10
�
�
Charging the Battery
Charge the battery before first use or when the battery is running low.
Turn the camera off
If the power-on lamp is lit, press the power switch
to turn the camera off.
2
Connect the AC adapter
Connect the AC adapter directly to the camera or place the camera in the
COOL-STATION and connect the AC adapter ( 9).
3
Charge the battery
The indicator lamp next to the camera monitor
will blink green as the battery charges. (If the
lamp flickers rapidly, the camera is not correctly
inserted or the battery is faulty. Reinsert the camera or replace the battery.)
Charging is complete when the indicator lamp
stops blinking (a fully exhausted battery will recharge in about two hours). Remove the camera from the COOL-STATION and unplug the AC
adapter.
The MH-62 Battery Charger
The battery can also be charged using the optional MH-62 battery charger (
90).
11
First Steps
1
Inserting Memory Cards
Pictures are stored in the camera’s internal memory (approximately 20 MB) or on
removable Secure Digital (SD) memory cards ( 90). Internal memory is used for
recording and deleting pictures only if no memory card is inserted.
To insert a memory card:
First Steps
1
Turn the camera off
If the power-on lamp is lit, press the power switch
to turn the camera off.
2
Insert the memory card
Open the battery-chamber/memory card slot
cover and slide the memory card in until it clicks
into place. Close the memory card slot cover.
Inserting Memory Cards
Check to be sure the card is in the correct orientation.
Inserting the card upside down or backwards could
damage the camera or the card.
3
Press the power switch to turn the camera on
If no message is displayed in the monitor, the
camera is ready for use.
If the message shown at right is displayed, the
memory card must be formatted before use.
Note that formatting permanently deletes all pictures and other data on the memory card. Be sure
to make copies of any pictures you wish to keep
before beginning formatting.
CARD IS NOT FORMATTED
Format
No
Confirm
To begin formatting, rotate the rotary multi selector to highlight Format and
then press the button. Do not turn the camera off or remove the batteries
or memory card until formatting is complete.
12
Removing Memory Cards
Before removing memory cards, turn the camera off and confirm that the power-on and indicator lamps are off. Open the
battery-chamber/memory card slot cover and press the card
in to partially eject the card. The card can then be removed
by hand.
�
Write protect switch
First Steps
The Write Protect Switch
SD cards are equipped with a write protect switch. Pictures
can not be recorded or deleted and the memory card can not
be formatted when this switch is in the “lock” position.
�
13
Camera Operations
Turning the Camera on and Off
To turn the camera on, press the power switch. The power-on lamp will light.
Power switch
Power-on lamp
On
Camera on.
Blinks Monitor has turned off to save power (see below).
Flickers Battery exhausted. Recharge or change battery.
Off
Camera off.
The monitor will turn on.
Camera Operation
Battery indicator
NO ICON
(
Shooting mode
5, 18, 26, 32, 35)
Battery fully charged.
Low battery; prepare to recharge or change battery.
WARNING!! BATTERY
Battery exhausted. Recharge or change battery.
EXHAUSTED
Internal memory/memory card indicator ( 12)
Pictures will be recorded to internal memory.
Pictures will be recorded to memory card.
Number of exposures remaining (
Image mode (
74)
Flash mode (
102)
20)
To turn the camera off, press the power switch and wait for the power-on lamp to
turn off.
Turning the Camera on (Playback Mode)
If the
button is pressed for about a second when the camera is off, the camera will turn
on in playback mode ( 43).
Auto Power off (Stand-by Mode)
In shooting mode, the monitor will dim to reduce the drain on the battery if no operations
are performed for about five seconds. The monitor will brighten when camera controls are
used. At default settings, the monitor will turn off altogether if no operations are performed
for about a minute during shooting and playback (stand-by mode;
88). The camera will
turn off automatically if no operations are performed for another three minutes.
14
Zoom
The zoom control is used to frame subjects in the monitor. Select W to zoom out, increasing the area visible
in the frame. Select T to zoom in up to 3 × so that the
subject fills a larger area of the frame. The amount of
zoom is displayed in the monitor.
Indicator is displayed when
zoom control is pressed
Optical zoom (up to 3 ×)
Zoom out
Zoom in
Indicator turns yellow when
digital zoom is in effect
Digital Zoom
Unlike optical zoom, digital zoom does not increase the amount of detail visible in the picture.
Instead, details visible at 3 × zoom are simply enlarged, producing a slightly “grainy” image.
15
Camera Operation
Holding the control to T for about two seconds at 3 × zoom will trigger digital zoom,
allowing the subject to be magnified up to 4 × more, for a total of magnification of
12 ×.
Focus and Shutter Release
The camera features a two-stage shutter-release button. First, lightly press the
shutter-release button about halfway, stopping when you feel resistance. Once the
camera has focused, press the shutter-release button the rest of the way down to
release the shutter and take a picture.
Camera Operation
1
Focus: Press the shutter-release button halfway. If
the camera is able to focus on the subject in the
focus area at the center of the frame, the focus
(AF●) indicator and focus area will be displayed in
green. If they blink red, the camera was unable to
focus. Change the composition and try again.
2
Shoot: Gently press the shutter release button the
rest of the way down (moving the camera when releasing the shutter may result in blurred pictures).
The flash may fire if the subject is poorly lit.
During Recording
While pictures are being recorded, the or icon will blink and the indicator lamp will blink
green. Removing memory cards or batteries while these indicators are blinking or the
(wait) icon is displayed could affect pictures or damage the camera or card.
16
Using Menus
To make a selection from the shooting or playback menus, press the
follow the steps below:
1
button and
2
Display sub-menu.*
Highlight menu item.
4
Select and exit to previous menu.*
Highlight option.
* In some cases, menu items can also be selected by pressing rotary multi selector to right.
To make a selection from the shooting or playback mode menus, press the
button and follow the steps below:
1
2
Highlight mode.
Exit to highlighted mode.
Lost?
For help on the current menu, press the zoom control to T
( ). Press the button to display the options for the selected item. To return to the original menu, press the zoom
control to T ( ), or press the
button to return to shooting or playback.
17
Camera Operation
3
Basic Photography and Playback
Mode
This section describes how to take pictures in (auto) mode, an automatic, “pointand-shoot” mode recommended for first-time users of digital cameras.
1
2
Turn the camera on. *
* If
Display shooting mode menu.
is displayed in monitor, camera is already in
Basic Photography and Playback
3
mode. Proceed to Step 5.
4
Highlight
.
5
Select and exit to
6
Frame subject in center focus area.
7
Focus.
Take picture. If lighting is poor, AF-assist illuminator may light when camera focuses
and flash may fire when picture is taken (
20, 21).
Holding the Camera
Hold the camera steadily in both hands, keeping your fingers and other objects away from the lens, flash, self-timer
lamp, antenna, and microphone.
18
mode.
Viewing Pictures
Press the
button to display a picture in the monitor (if the picture was taken with the camera rotated
90 °, it will be displayed in “tall” orientation). Use the
rotary multi selector to view additional pictures: rotate
the rotary multi selector clockwise to view pictures in
the order recorded, counter-clockwise to view pictures
in reverse order. Rotate quickly to scroll rapidly to the
desired picture. Pictures may be displayed briefly at
low resolution while being read from memory.
Press the
button again to return to shooting mode.
Erase image (s)?
No
Yes
Confirm
Deleting the Last Shot
To delete the most recent picture, press the
button while the camera is in shooting
mode. A confirmation dialog will be displayed; highlight Yes and press to delete the
last shot taken.
The Rotary Multi Selector
As an alternative to rotating the rotary multi selector, press the rotary multi selector down or
right to view pictures in the order recorded, up or left to view pictures in reverse order. Keep
pressed to scroll rapidly to the desired picture.
19
Basic Photography and Playback
Deleting Unwanted Pictures
To delete the picture currently displayed in the monitor, press the
button. A confirmation dialog will be
displayed; highlight one of the following options and
press the button:
• No: Exit without deleting the picture.
• Yes: Delete the picture.
Using the Flash
The flash has a range of 0.3–2.6 m (1 ft.–8 ft. 6 in.) when the camera is zoomed all the
way out. The range at maximum zoom is 0.3–1.4 m (1 ft.–4 ft. 7 in.). The following
flash modes are available:
Mode
Description
Auto
Flash fires automatically when lighting is poor.
Auto with redReduces “red eye” in portraits (see following page).
eye reduction
Flash Cancel (off ) Flash will not fire even when lighting is poor.
Anytime Flash Flash fires whenever picture is taken. Use to “fill-in” (illuminate) shad(fill flash)
ows and back-lit subjects.
Flash illuminates main subject; slow shutter speeds are used to capture
Slow sync
background at night or under dim light.
Basic Photography and Playback
1
Flash
Confirm
2
Flash
Confirm
Display flash-mode menu.
3
Highlight mode.
Make selection (to exit without changing
mode, wait five seconds). Selection is shown
by icon in display. Selection for mode is
stored in memory even when camera is off.
The Flash Lamp
The flash lamp shows flash status when the shutter-release
button is pressed halfway.
• On (red): Flash will fire when picture is taken
• Blinks red: Flash charging. Wait a few seconds and try again.
• Off: Flash off or not required.
20
Red-eye Reduction
The camera uses advanced red-eye reduction. Low-intensity light pulses cause the subject’s pupils to contract before the flash fires. If the camera still detects red-eye, it will process the image to further its effects (“In-Camera Red-eye Fix”; note that this may slightly
increase the time needed to record the picture). This mode is not recommended where
a quick shutter response is required; if the desired results are not achieved, try again at a
different flash setting.
When Lighting Is Poor
햲 The AF-assist illuminator may light
If lighting is poor, the AF-assist illuminator may light to assist the focus operation when the shutter-release button is
pressed halfway. The illuminator has a maximum range of
about 1.9 m/6 ft. 3 in. (W) to 1.1 m/3 ft. 7 in. (T). The AF-assist illuminator is not available in
some modes ( 26–34) and can also be turned off manually ( 88), although in this case
the camera may not focus when lighting is poor.
If the warning at right is displayed after a picture is taken,
the picture may be blurred. Select No to exit without recording the picture. If no operations are performed for
about twenty seconds, the picture will be recorded automatically.
Basic Photography and Playback
햳 A blur warning may be displayed
If the flash is off, a icon will be displayed to warn that pictures may be blurred as a result of slow shutter speeds. If
an ISO icon is displayed, sensitivity has been raised to compensate for poor lighting and pictures may be affected by
“noise” in the form of randomly-spaced, brightly-colored
dots ( 78). The camera may process pictures to reduce
noise, doubling recording times.
PICTURE IS BLURRED.
SAVE PICTURE?
No
Yes
Confirm
21
Taking Pictures with the Self-Timer
The camera is equipped with a ten- and three-second timers for self-portraits and
to reduce blur. When using the self-timer, mount the camera on a tripod (recommended) or rest it on a flat, level surface.
Display self-timer menu.
1
Self-timer
Confirm
Highlight option.
3 s: Use to reduce blur.
10 s: Use for self-portraits.
2
Self-timer
Confirm
Basic Photography and Playback
3
4
Make selection (to exit without setting
timer, wait five seconds).
icon appears in
display.
Frame picture and start timer; display in
monitor shows seconds remaining before
shutter is released. To stop timer before picture is taken, press shutter-release button
again.
The self-timer lamp will blink until one second before
the picture is taken, staying lit during the final second
to warn that the shutter is about to be released.
22
Macro Close-up Mode
Macro close-up mode is used for taking shots of objects as close as 4 cm (1.6 in.).
1
2
Macro close-up
Macro close-up
Confirm
Confirm
Display macro close-up menu.
3
5
Make selection (to exit without changing
mode, wait five seconds). Selection is shown
by icon in display.
Frame picture. Minimum focus distance varies with zoom position; if zoom is adjusted to
▲ position and icon turns green, camera
can focus at distance of 4 cm (1.6 in.). Camera
focuses continuously until shutter-release
button is pressed halfway to lock focus.
Focus and shoot. Note that flash may be unable to light entire subject at distances of less than 30 cm (1 ft.); if flash fires, play picture back and check results.
The macro close-up mode option last selected for
next time mode is selected.
(auto) mode is restored the
23
Basic Photography and Playback
4
Highlight ON.
One-Touch Portrait Mode
For portrait shots, press the button when the camera is in shooting mode. This
will automatically activate the following features:
• Portrait: The portrait subject stands out clearly.
• Face-priority AF: The camera automatically detects and focuses on faces.
• Advanced red-eye reduction: Reduces “red-eye” caused by the flash ( 21).
Macro close-up is not available in one touch portrait mode. To return to the previously selected shooting mode, press the button again.
1
2
Basic Photography and Playback
Press
button.
icon is displayed.
Frame picture using
icon as guide.*
* When camera detects face, will change to double yellow border. If camera detects multiple faces, it will focus on closest subject; other subjects are indicated by single border. If
camera can no longer detect subject (for example, because subject has looked away from
camera), borders will no longer be displayed; return to Step 2.
3
4
Set focus and exposure.
Double border turns green.
Take picture.
Face-Priority AF
The camera’s ability to detect faces depends on a variety of factors, including whether or not
the subject is facing the camera. The camera may be unable to detect faces that are hidden
by sunglasses or other obstructions or that take up too much or too little of the frame. If no
face is detected when the shutter-release button is pressed halfway, the camera will focus on
the center of the frame.
The camera will focus continuously until a face detected. If the double border flashes yellow
when the shutter-release button is pressed halfway, the camera is unable to focus; release the
button and try again.
24
The One-Touch Portrait Menu
Pressing the
button in one-touch portrait mode displays the one-touch portrait
menu. With the exception of exposure compensation, the options chosen in this
menu are restored the next time one-touch portrait mode is selected.
Option
SET UP
Image mode
Description
Display setup menu ( 83)
Choose image size and quality ( 74).
Alter exposure from the value selected by the camera. Choose from
Exp. +/–
values between –2.0 EV and +2.0 EV. Negative values produce darker
pictures, positive values brighter pictures.
Choose from Normal, Brighter (reduces vividness of skin tones), and
Portrait effect
Softer (soft effect).
Basic Photography and Playback
25
Scene and Scene Assist Modes
The camera offers a choice of eleven “scene” and four “assist” options. Camera settings are automatically optimized for the selected subject type.
Scene mode: The following scenes are available.
Party/Indoor
Night Landscape
Copy
Beach/Snow
Close Up
Back Light
Sunset
Museum
Panorama Assist
Dusk/Dawn
Fireworks Show
Scene assist modes: These scenes offer framing assist to help compose shots.
Mode
Portrait
Landscape
Description
For portraits.
For landscapes.
Mode
Sports
Description
For moving subjects.
For portraits taken against
Night Portrait
a night backdrop.
Scene Mode
Scene and Scene Assist Modes
To take pictures in scene mode, select shooting mode and follow these steps:
1
2
Display shooting mode menu.
Highlight
4
3
Select and exit to last selected scene.
5
Display scene menu.
6
Highlight scene.*
* Select
to display setup menu ( 83),
adjust exposure compensation ( 31).
26
.
Select and exit to selected scene.
to display image-mode menu (
74),
to
7
Take pictures.
The following scenes are available:
Party/Indoor
AUTO
OFF
OFF
Use for shots that include details of the background, or to capture the
effects of candlelight and other indoor background lighting.
Beach/Snow
AUTO
AUTO
OFF
OFF
Captures the brightness of such subjects as snowfields, beaches, or
sunlit expanses of water.
AUTO
Setting Icons
The icons to the right of the scene name indicate (in order from left to right) the default
flash ( 20), self-timer ( 22), macro close-up ( 23), focus (see below), and AF-assist
( 21) settings for that scene. White squares ( ) indicate settings that can be changed,
solid squares ( ) settings that are fixed at the values shown. Default values for the current
scene are restored when the camera is turned off or another scene or shooting mode is
selected. Focus is shown as follows:
Camera focuses on subject in center of frame
Camera focuses at infinity. Focus indicator is always displayed in green when shutter-release button is pressed halfway; note, however, that foreground objects may not
always be in focus.
The following icons indicate the precautions that may be needed to avoid blur:
Hold camera steady
Use tripod
A
icon indicates that pictures may be processed to reduce noise, resulting in increased
recording times.
27
Scene and Scene Assist Modes
Sunset
OFF
OFF
OFF
Preserves the deep hues seen in sunsets and sunrises.
Dusk/Dawn
OFF
OFF
OFF
OFF
Preserves the colors seen in the weak natural light before sunrise or
after sunset.
Night Landscape
OFF
OFF
OFF
OFF
Slow shutter speeds are used to produce stunning night landscapes.
Close Up
AUTO
AUTO
OFF
ON
Use to photograph flowers, insects, and other small objects at ranges as close as 4 cm (1.6 in.), with the background artistically blurred.
Camera zooms to macro close-up position. Macro close-up icon ( )
turns green, indicating that camera can focus as close as 4 cm (1.6 in.)
to lens. Camera focuses continuously until shutter-release button is
pressed halfway to lock focus.
Scene and Scene Assist Modes
Museum
OFF
OFF
OFF
ON
Use indoors where flash photography is prohibited (for example, in
museums and art galleries) or in other settings in which you do not
want to use the flash. BSS ( 78) turns on automatically.
Fireworks Show
OFF
OFF
OFF
OFF
Slow shutter speeds are used to capture the expanding burst of light
from a firework.
Copy
AUTO
OFF
OFF
ON
Provides clear pictures of text or drawings on a white board or in
printed matter such as a business card. Use macro close-up ( 23)
to focus at short ranges. Colored text and drawings may not show
up well.
Back Light
AUTO
OFF
OFF
Use when light is coming from behind a portrait subject, throwing
their features into shadow. The flash fires automatically to “fill in” (illuminate) shadows.
28
Panorama Assist
OFF
OFF
OFF
AUTO
Use when taking a series of pictures that will later be joined together in PictureProject to
form a panorama.
Taking Pictures for a Panorama
1
Highlight
(Panorama assist) in scene
menu ( 26).
Right
to left
Top to
bottom
4
5
Default pan direction displayed.
Bottom Select how pictures will be joined together
to top in completed panorama. This is the direction in which camera will be panned after
Left to each shot.
right
Make selection (to return to step 3, press
button again). Pan direction displayed in
white.
Take first shot. About 1/3 of picture is superimposed on view through lens (if pan direction is left to right, picture will appear on side
of monitor). AE-L icon is displayed to show
that white balance and exposure settings for
this picture apply to all shots in series.
29
Scene and Scene Assist Modes
3
2
6
Compose next shot to overlap with previous picture.
8
7
Take next shot. Repeat steps 6–7 until all
shots in series have been taken.
End series. Shooting will also end if a new
mode is selected or camera enters standby
mode ( 14).
The camera focuses on the subject in the center of the frame. Use a tripod for better results.
Scene and Scene Assist Modes
Panorama Assist
Flash mode ( 20), macro close-up ( 23), and self-timer ( 22) can not be adjusted after
the first picture is taken. Pictures can not be deleted or zoom or image mode ( 74) adjusted
until shooting is complete. See page 103 for information on how panoramas are stored.
30
Using Exposure Compensation in Scene Mode
Exposure compensation is used to alter exposure from the value selected by the
camera. Choose from values between –2.0 EV and +2.0 EV. Negative values produce darker pictures, positive values brighter pictures. To choose a value for exposure compensation, select a scene ( 27–29) and follow the steps below.
1
2
Display scene menu.
3
Highlight
(Exp. +/–).
4
Choose value for exposure compensation.
6
5
Select and exit to scene menu.
Return to previously-selected scene.
Exposure compensation for the current scene will be reset to 0 when the camera is
turned off or another scene or shooting mode is selected.
31
Scene and Scene Assist Modes
Display exposure compensation menu.
Scene Assist Mode
Compose pictures with the help of framing guides displayed in the monitor.
1
2
Display shooting mode menu.
3
Highlight
5
Scene and Scene Assist Modes
32
, or
.
Display framing assist menu.
6
Highlight composition type.*
: camera setup (
7
,
4
Select and exit to selected mode.
*
,
83);
Select and return to shooting mode.
: select image-mode (
74);
: adjust exposure (
31)
Take pictures. If framing guides are displayed, position subject in guides before
shooting.
*
Portrait Assist: Use for smooth, natural-looking portraits.
PORTRAIT
Portrait Left
Portrait Right
OFF
OFF
OFF
OFF
OFF
OFF
No guides are displayed. Camera sets focus
and exposure for subject in center focus area.
Compose shot with subject in left or right half
of frame.†
Portrait Close-up Compose shot with face in top half of frame.†
Compose shot with two subjects side-byPortrait Couple
side.†
Portrait Figure Compose shot in “tall” orientation.†
* AF-assist available in PORTRAIT mode.
† Camera sets focus and exposure for subject in framing guides.
Landscape Assist: Use for vivid landscapes or portraits that
feature a landmark in the background.
*
OFF
No guides are displayed. Use to focus on distant objects through foreground objects such
as windows or a screen of branches.†
Compose shot with sky in top third of frame.
Scenic View
Match skyline with wavy yellow guide.†
Photograph buildings. Framing grid helps
Architecture
keep verticals and horizontals aligned with the
frame.†
Compose shots with landmark to left or right
Group Right
of portrait subjects. Camera sets focus and exGroup Left
posure for portrait subjects.
* In Group Right and Group Left modes, flash mode is automatically set to AUTO; other
modes can be selected.
† Camera focuses at infinity. Focus indicator ( 16) is always displayed in green when shutter-release button is pressed halfway; note, however, that foreground objects may not always be in focus.
LANDSCAPE
Scene and Scene Assist Modes
33
Sports Assist: Capture motion in a series of high-speed shots.
No framing guides are displayed. Focus, exposure, and white
balance for all pictures are determined by the first shot in each
series.
OFF
OFF
OFF
OFF
While shutter-release button is held down, camera shoots about 2.2 frames
per second (fps) until
icon is displayed. Camera focuses continuously
even when shutter-release button is not pressed.
Sport
As above, except that camera focuses at about 4.5 m/15 ft. (6 m/20 ft. at maxiSpectator mum zoom) to infinity for improved shutter response.
Each time shutter-release button is pressed, camera takes *
16 shots in about 2 seconds and arranges them in single
Sport
picture (1,600 × 1,200 pixels) in size. Camera focuses
Composite
continuously even when shutter-release button is not
pressed.
SPORTS
Scene and Scene Assist Modes
Night Portrait Assist: Use for a natural balance between the
main subject and background lighting in portraits shot at
night. This mode offers the same assist options as portrait assist mode. To prevent blurring, mount the camera on a tripod
or rest it on a flat, stable surface.
*
OFF
OFF
OFF
* AF-assist available in
NIGHT PORTRAIT
mode.
34
Movies
Recording Movies
To shoot movies with sound recorded via the built-in microphone, select shooting
mode and follow the steps below (no sound is recorded for time-lapse movies).
Movies recorded to internal memory at the default setting of Small Size 320 can
be up to 1 minute 10 seconds long; a 256 MB memory card can hold up to 14 minutes 30 seconds.
1
2
Display shooting mode menu.
3
.
Select and exit to movie mode. Exposure
count display shows maximum total length
of movie that can be recorded.
Press shutter-release button all the way
down to start recording. Progress bar shows
amount of memory remaining. Press shutter-release button all the way down a second time to end recording.
Recording Movies
The flash ( 20) turns off in all modes except Time-lapse movie. The self-timer ( 22) can
not be used. Optical zoom can not be adjusted during recording; digital zoom is available to
a maximum of 2 × ( 15).
If the camera is pointed at the sun or other bright light source during recording, vertical comet-like streaks (“smear”) may appear in the movie. Avoid pointing the camera at bright light
sources when filming movies.
More on Movies
See the Appendix for information on how movie files are stored ( 103), the maximum total
length of movie that can be recorded at different settings ( 102), and movie menu defaults
( 101).
35
Movies
4
Highlight
The Movie Menu
Pressing the
button in movie mode displays the movie menu. Options chosen
in this menu are restored the next time movie mode is selected.
Option
SET UP
Movie options
Auto-focus mode
Electronic VR
Description
Display setup menu ( 83).
Choose type of movie that will be recorded (see below).
Choose how camera focuses in movie mode ( 37).
Reduce effects of camera shake ( 37).
Movie Options
The following options are available:
Option
Size (pixels)
Frames per second
TV movie 640★
640 × 480
30
Small size 320★
320 × 240
30
Small size 320
320 × 240
15
Pictmotion 320*
320 × 240
15
Smaller size 160
160 × 120
15
Time-lapse movie★
640 × 480
30
* Maximum length is 60 s, making movie suitable for use with Pictmotion ( 50).
Movies
Time-Lapse Movie: Record flowers opening or butterflies emerging from cocoons.
The camera takes up to 1800 stills at specified intervals and joins them into a silent
movie up to sixty seconds long. Charge the battery before shooting begins.
Selecting Time-lapse movie★ displays the menu shown in Step 1, below.
1
2
Choose interval between shots.
3
36
Select and exit to movie options menu.
Press
button to exit menu.
Press shutter-release button all the way
down to start recording. Camera will take
pictures at specified interval until shutterrelease button is pressed again, memory
is full, or 1800 frames have been recorded.
Monitor turns off and indicator lamp blinks
green between shots.
Auto-focus Mode
Choose how the camera focuses in movie mode.
Option
Single AF
Full-time AF
Description
Camera focuses when shutter-release button is pressed halfway and
locks at this position during shooting, preventing sound of camera
focusing from interfering with recording.
Camera constantly adjusts focus, even when shutter-release button
is not pressed.
Electronic VR
Choose On to reduce the effects of camera shake in all movie modes except Timelapse movie. An electronic VR indicator is displayed in the monitor when electronic VR is on ( 6–7).
Movies
37
Movie Playback
In full-frame playback (
a icon.
43), movies are indicated by
100NIKON
0001.MOV
15.05.2006
10:20
Start
1m10s
10s
To play a movie, display it in full-frame playback and
button. Playback controls appear at the
press the
top of the display; press the rotary multi selector left or
right to highlight a control, then press the button to
perform the selected operation.
Control
Description
Movie rewinds while button is pressed.
Movie advances while button is pressed.
Pause playback. Rotate rotary multi selector for single-frame advance or rewind.
Go ahead one frame. Advance continues while button is pressed.
Go back one frame. Rewind continues while button is pressed.
Resume playback.
End movie and return to full-frame playback.
Movies
Volume is displayed when the zoom control is pressed. Select W to lower volume,
T to increase. Rotate the rotary multi selector to fast forward or rewind while the
movie is playing. To delete a movie, display it in full-frame playback or select it in the
thumbnail list and press the
button. A confirmation dialog will be displayed.
38
Voice Recordings
Audio voice recordings can be recorded over the built-in microphone and played
back over the built-in speaker.
Making a Voice Recording
To make a voice recording, select shooting mode and follow these steps:
1
2
Display shooting mode menu.
Highlight
Select and exit to voice recording mode.
Display shows length of recording that can
be made.
3
4
.
1
2
3
5
6
7
4
1
2
3
4
Recording indicator
File number
Length of recording
Date of recording
5 Time remaining
6 Index number †
7 Progress indicator
* Camera enters stand-by mode ( 14) and indicator lamp turns green. Press
to reactivate display. To pause recording, press button; self-timer and indicator lamps will blink.
Press again to resume.
† To create index, press rotary multi selector up, down, left, or right during recording. Camera
can skip to any index during playback. Start of recording is index number 01; other numbers
are assigned in ascending order, to maximum of 98.
5
Press shutter-release button all the way
down a second time to end recording. Recording will end automatically after five
hours or when no more memory is available.
39
Voice Recordings
Press shutter-release button all the way down to start recording.*
The Voice Recording Menu
Pressing the
button in voice recording mode displays the following options.
The option selected for Sound quality is restored the next time voice recording
mode is selected.
Option
Description
SET UP
Display setup menu ( 83).
Sound quality Select High for high quality, Normal for reduced file size.
Voice Recordings
Voice Recordings
PictureProject can not be used to transfer or play voice recordings. Select Interface > Mass
storage for USB, copy the files manually, and then play them back using QuickTime or any
other WAV-compatible audio player. Note that index points created with the camera can not
be used when voice recordings are played back on another device.
The COOLPIX S6 may be unable play or copy sound files created with other devices. See the
Appendix for information on how voice recordings are stored ( 103) and on the maximum
total length of voice recording that can be stored ( 102).
40
Playing Voice Recordings
To play voice recordings back, select playback mode and follow these steps.
1
2
Display playback mode menu.
Highlight
3
.
4
Display list of voice recordings.
Select recording.
1 Control icons *
6 Date of recording
2 File number
7 Length of recording
7
3 Playback time
8 Volume †
4
8
9
Index
4
Index
number
5
9
5 Progress indicator
Play recording. Rotate rotary multi selector to advance or rewind. To delete recording,
press
button. Press
to exit playback and return to recording mode.
5
1
6
2
3
Voice Recordings
* Press rotary multi selector left or right to highlight control, press button to select.
Pause playback.
Resume playback.
Advance recording. Playback resumes when rotary multi selector is released.
Rewind recording. Playback resumes when rotary multi selector is released.
Return to start of current index.
Skip to next index.
End playback and return to voice recording list.
† Zoom control controls volume. Select W to lower volume, T to raise volume.
41
Copying Voice Recordings
To copy voice recordings between internal memory and a memory card, display
the voice recording list shown in Step 3 on the preceding page and press the
button. This option is available only when a memory card is inserted.
Highlight option:
•
: Copy recordings from internal memory to memory card
•
: Copy recordings from memory card
to internal memory
1
2
3
Highlight Selected files.*
Display menu of copy options.
* To copy all voice recordings, highlight Copy all files and press
dialog will be displayed; highlight Yes and press button.
4
5
Voice Recordings
Display list of voice recording files.
6
Highlight file.
7
Confirmation dialog displayed.
42
button. Confirmation
Highlight Yes and press
to copy file.
button
Viewing Pictures on the Camera
To view pictures full-frame in the monitor (full-frame
playback), press the
button (if the camera is off,
pressing the
button for about a second will turn
the camera on in playback mode). The following operations can be performed:
To
Press
To
View playback menu
View other pictures
19
Delete picture
Zoom picture in
View thumbnails
View playback mode menu
Record/play voice memo
—
Enhance contrast
44
Movie: Play movie
—
Exit to shooting mode
5
T( )
W( )
Press
80
Shutter
46
button
45
38
—
Viewing Multiple Pictures: Thumbnail Playback
Pressing the zoom control to W ( ) in full-frame playback displays pictures in “contact sheets” of four, nine,
sixteen, or twenty-five thumbnail images. The following operations can be performed while thumbnails are
displayed:
To
Press
Highlight picture
W ( )/
T( )
—
—
Press
—
5
80
45
—
Deleting Pictures
Pressing the
button in full-frame or thumbnail playback displays the dialog shown at right. Highlight Yes
and press the button to delete the selected picture.
Erase image (s)?
No
Yes
Confirm
Viewing Pictures in Internal Memory
Pictures in internal memory can only be viewed if no memory card is inserted.
43
Viewing Pictures on the Camera
Change number of pictures
displayed
Delete highlighted picture
—
To
Exit to full-frame playback
View playback mode menu
View playback menu
Enhance contrast
Exit to shooting mode
Taking a Closer Look: Playback Zoom
Pressing the zoom control to T during full-frame playback zooms the current picture in 3 ×, with the center
of the picture displayed in the monitor (Quick Playback
Zoom). The following operations can be performed
while pictures are zoomed in:
To
Zoom in (maximum 10 ×)
Zoom out
View other areas of picture
Delete picture
Exit to full-frame playback
View mode menu
View playback menu
Create cropped copy (see below)
Exit to shooting mode
Press
T( )
W( )
—
—
—
43
43
5
80
Shutter button —
—
×3.0
Scroll
Zoom
Playback zoom display.
Note that “tall” orientation
pictures are displayed in
“wide” orientation when
zoomed in. Select T once
to display picture in “wide”
orientation, again to zoom
picture in 3 ×.
Creating a Cropped Copy
If a
icon is displayed in the monitor during playback zoom, the portion of the picture currently visible
in the monitor can be saved to a separate file. Pressing
the shutter-release button displays the dialog shown
at right; highlight Yes and press the button to create a new picture containing only the area visible in
the monitor.
Save this image
as displayed?
No
Yes
Confirm
Viewing Pictures on the Camera
Cropped copies are stored as JPEG files with a compression ratio of 1 : 8. Depending
on the size of the original and the zoom ratio at the time the copy was created, copies will be 2,592 × 1,944 ( ), 2,048 × 1,536 ( ), 1,600 × 1,200 ( ), 1,280 × 960 ( ),
1,024 × 768 ( ), 640 × 480 ( ), 320 × 240 ( ), or 160 × 120 ( ) pixels in size.
Cropped Copies
See the Appendix for more information on cropped copies (
103).
Auto Power off (Stand-by Mode)
At default settings, the monitor will turn off if no operations are performed for about a minute
during playback (stand-by mode;
88). The camera will turn off automatically if no operations are performed for another three minutes.
44
Enhancing Contrast: D-Lighting
Pressing the button during full-frame
or thumbnail playback creates a copy
of the current picture with enhanced
brightness and contrast, brightening
dark and backlit subjects.
Before
1
2
Confirmation dialog displayed.
3
After
Highlight OK.
Create copy.
During playback, copies created with D-Lighting are indicated by a
6–7).
icon (
Viewing Pictures on the Camera
D-Lighting
See the Appendix for more information on D-Lighting copies (
103).
45
Voice Memos: Recording and Playback
The built-in microphone ( 2) can be used to record
voice memos for pictures marked with a
icon in
full-frame playback ( 43).
Recording Voice Memos
To record a voice memo, press and hold the shutter-release button. Recording
ends after about 20 seconds or when the button is released. Do not touch the microphone during recording. Note that if a voice memo already exists for the current
picture, it must be deleted before a new voice memo can be recorded.
Playing Voice Memos
During playback, pictures to which a voice memo has been appended are indicated by a
icon ( 6–7). Press the shutter-release button to start and stop
playback. Volume is controlled by the zoom control. Select W to lower volume, T
to increase.
Deleting Voice Memos
To delete the voice memo for the current picture, press
the
button. The dialog shown at right will be displayed; rotate the rotary multi selector to highlight an
option and press the button to select.
• No: Exit without deleting the picture or voice memo.
• : Delete voice memo only.
• Yes: Delete both picture and voice memo.
Erase image (s)?
No
Confirm
Yes
Viewing Pictures on the Camera
Voice Memos
Voice memos can not be added to pictures created with other types of camera. Voice memos
recorded using other types of camera can not be played back on the COOLPIX S6. See the
Appendix for more information on voice memos ( 103).
46
Viewing Pictures by Date
In full-frame and thumbnail playback, pictures taken on selected dates can be selected for viewing, deletion, printing, protection, and transfer.
Calendar Mode: Choose a date from a calendar.
1
Display playback mode menu (
3
2
5).
Highlight Calendar ( ).
Dates for which pictures exist are underlined
in yellow. The following operations can be
performed:
To
Press
Select month (keep control
W/T —
pressed for quick scroll)
Highlight date (only if pictures
exist for more than one date)
—
View pictures taken on date
Delete all pictures taken on date
View playback mode menu
View playback menu
Exit to shooting mode
49
43
5
48
—
Viewing Pictures on the Camera
Calendar/List by Date
The camera lists a maximum of 9,000 pictures for each date. Dates with more than 9,000
pictures are indicated by an asterisk (“*”). Pictures taken while the camera clock is not set are
not displayed.
47
List-by-Date Mode: Choose a date from a list.
1
Display playback mode menu (
3
2
5).
Highlight List By Date ( ).
View dates for which pictures exist. The following operations can be performed:
To
Press
Highlight date
—
* Camera lists up to 30 dates. If pictures ex- View pictures taken on date
ist for more than 30 dates, all pictures re- Delete all pictures taken on date
corded earlier than most recent 29 dates
View playback mode menu
will be listed together as Others.
View playback menu
Exit to shooting mode
Pressing the
button in the calendar or date list disOption
plays the options listed at right. These options apply to Print set
Slide show
all pictures taken on the currently selected date.
Delete
Protect
Transfer marking
49
43
5
—
—
61
81
81
81
81
Viewing Pictures on the Camera
Print Set/Transfer Marking
Selecting Print set or Transfer marking from the menu for the calendar or date list displays
a confirmation dialog. Selecting Yes removes existing print or transfer marking from all pictures in internal memory or on the memory card, ensuring that only pictures taken on the
selected date are selected for printing or transfer.
48
Viewing Pictures
To view pictures taken on a selected date, highlight
the date in the calendar or date list and press the
button. The first picture for that date will be displayed
full frame, with
(calendar mode) or
(listby-date mode) displayed in the top left corner, and the
date and time of recording displayed in place of the
folder name and file number and type ( 6–7). The
following operations can be performed:
To
Press
View other pictures taken
on same date
Delete picture
Zoom picture in
View playback mode menu
T( )
Date/
time
: calendar mode
: list-by-date mode
To
Press
View playback menu
19 Record/play voice memo Shutter button
Enhance contrast
43
Movie: Play movie
44
Return to date list
W( )
5
Exit to shooting mode
Pressing the
button in full-frame playback displays
the options listed at right. These options apply only
to the picture currently displayed full frame, although
other pictures taken on the same date can be selected.
Option
Print set
Slide show
Delete
Protect
Transfer marking
Small pic.
—
46
45
38
—
—
61
81
81
81
81
82
Viewing Pictures on the Camera
49
Pictmotion by muvee
Pictmotion creates slide show movies with custom transitions and background
music. It is only available when a memory card is inserted in the camera.
Creating a Pictmotion Movie
To create a simple movie using the ten most recent pictures during full-frame or
thumbnail playback:
1
2
Display playback mode menu (
5).
3
Highlight Pictmotion ( ).
4
Display options.
5
Highlight
.
6
Display options.
Viewing Pictures on the Camera
7
Highlight All images.
8
Save Pictmotion?
Yes
Change settings
No
View Pictmotion.
9
Pictmotion is powered by muvee Technologies.
50
Confirm
When dialog is displayed, highlight Yes.
Save Pictmotion and return to Step 3.
To create a custom Pictmotion movie:
Display options
( 50, Step 3).
To choose style, background music,
playback order, and number of slides
for new movie, press
button and
make selections in Pictmotion settings
dialog ( 52). Press when done.
Select
All images (Confirm on)
Choose date
To select pictures
for movie, highlight
Confirm and press
to turn check box on.
All images
(Confirm off )
Confirm on
Rotate rotary multi
selector to highlight
pictures; press
to select (up to 30).
Press zoom control to
T to view highlighted
picture full, frame;
select W to return to
thumbnail display.
Press shutter button
when done.
Rotate rotary multi
selector to highlight
date, press left or
right to select. Press
when done.
Confirm off
Viewing Pictures on the Camera
View
Pictmotion.*
* Place hand behind speaker
for better sound.
Press
Save Pictmotion?
Yes
Change settings
No
Adjust settings
( 52).
Confirm
Confirmation dialog
displayed.
Yes
Save Pictmotion
No
Return to
Step 1
Change settings
51
Other Options (Steps 1 and 7 on Page 51)
Rotate the rotary multi selector to highlight options, press left or right to change.
Press the button to exit when done.
Music: Choose from Pachelbel’s Canon, Scarborough Fair, Pomp
and Circumstance March, Turkish March, and Grandfather’s
Clock; press zoom control to T to preview selected track (preinstalled tracks only). Up to three custom tracks can be added
using PictureProject (Windows only; see below).
Style: Choose from Motion,
Moody, Pro-Slow, ProFast, and Classic. Press
zoom control to T to preview selected style.
Playback order: Choose order of pictures in movie.
Random
Play pictures in random order.
Play in order
Play pictures in order recorded.
Fit to length: Choose whether to play background track once or repeat track until all pictures have been displayed at least once.
Repeat Repeat background track until all pictures have been
music
played at least once (some pictures may be repeated).
Repeat Play background track once, repeating or omitting picphotos tures as necessary.
Auto select: This option is only available if
button is pressed in Step 1 ( 51). Choose
from 10, 20, 30 or No auto select. This will be number of slides in slide show if Confirm is
not selected in Step 2. If Confirm is selected in Step 2, specified number of images will be
selected in Step 4, starting with most recent picture. Follow instructions in Step 4 to change
selection.
Pictmotion
If the current memory card holds twenty Pictmotion movies, no additional movies can be
created until an existing movie has been deleted.
Viewing Pictures on the Camera
The pictures in a Pictmotion movie are automatically protected when the movie is saved
( 81). Protection is not removed when the Pictmotion is deleted. Protected pictures are
marked with a icon in full-frame and thumbnail playback ( 6–7).
Pictmotion supports both still pictures and movie files; note, however, that in the case of movies only a small portion selected from the first sixty seconds of each movie will be included.
PictureProject
The Windows version of the supplied PictureProject software can be used to transfer
Pictmotion movies to a computer for viewing and to copy up to three three-minute custom sound tracks to a memory card inserted in the camera; see the PictureProject reference manual (on CD) for details. Pictmotion movies can also be transferred wirelessly in
Easy Transfer (PM) and PC modes ( 71). The Macintosh version does not support Pictmotion transfer or custom background tracks.
52
Viewing Pictmotion Movies
To view Pictmotion movies, display the Pictmotion menu as described in Steps 1–3
on page 50 and follow the steps below.
1
2
Highlight movie.*
* To delete highlighted movie, press
light Yes and press .
Display Pictmotion playback screen.
button. Confirmation dialog will be displayed; high-
3
4
Highlight Play.†
View movie.‡
† If Loop option is selected, movie will repeat automatically. To select or deselect Loop option, highlight Loop and press .
‡ Zoom control controls volume. To pause playback, press .
5
6
End
Restart
Confirm
Highlight End.**
Exit to movie list.
Viewing Pictures on the Camera
**To resume playback, highlight Restart and press
.
Pictmotion
See the Appendix for information on how Pictmotion movies are stored (
103).
53
Connecting to Televisions, Computers, and Printers
By connecting the camera to another device using the supplied A/V or USB cables,
you can:
• View pictures on TV and record movies to video (see below)
• Copy pictures to a computer for storage and editing ( 54–56)
• Print pictures on a home printer ( 57) or order prints from photofinisher
Pictures can also be transmitted to a computer or printed over a wireless LAN (
63–73). Before connecting the camera to another device, it may be necessary to
change the Interface settings in the setup menu ( 56, 89). To prevent the camera from turning off unexpectedly during connection, use fully charged batteries or
the supplied AC adapter.
Connecting to Televisions, Computers, and Printers
Viewing Pictures on TV
1
Check that the option selected for Interface > Video mode matches the device to which
the camera will be connected ( 89), and then
turn the camera off.
2
Connect the COOL-STATION to the TV using the
supplied A/V cable. Connect the black plug to the
COOL-STATION, the yellow plug to the video-in
jack on the TV, and the white plug to the audio-in
jack.
3
4
Tune the television to the video channel. If in doubt, consult the documentation for the TV.
Place the camera in the COOL-STATION and press the
button for about a
second to turn the camera on. The camera monitor will remain off and the
television will show the image normally shown in the monitor.
Viewing Pictures on a Computer
Before pictures can be transferred (copied) to a computer via USB, PictureProject
must be installed. For more information on installing and using PictureProject, see
reference CD and Quick Start Guide. To transfer pictures to a computer:
1
54
Start a computer to which PictureProject has been installed.
2
3
Connect COOL-STATION to the computer using
the supplied USB cable.
Place the camera in the COOL-STATION and turn it
on.
Press the ( ) button* to copy all marked pictures to the computer. The following messages
will be displayed:
* Note that the button can not be used to transfer pictures if the memory card is locked
( 13) or if Mass Storage is selected for USB and no memory card is inserted. Transfer
pictures using the PictureProject Transfer button (see below). Pictmotion movies can be
transferred in PictureProject ( 52).
6
The pictures will be displayed in PictureProject when transfer is complete.
Disconnect the camera as described in “Disconnecting the Camera” ( 56).
Marking Pictures for Transfer
Pictures marked for transfer are shown by a icon during
playback. By default, all pictures are automatically marked
for transfer. Two options control transfer marking:
• Interface > Auto transfer (setup menu): Choose On to
mark all new pictures for transfer ( 89).
• Transfer marking (playback menu): Change marking for existing pictures (
81).
The PictureProject Transfer Button
To copy both marked and unmarked pictures to the computer, click the PictureProject Transfer button instead of
pressing the button in Step 5. See the Quick Start Guide
or PictureProject reference manual (on CD) for details.
55
Connecting to Televisions, Computers, and Printers
4
5
Choose an Interface > USB option as described in “Choosing a USB Option
for Connection to a Computer” ( 56) and then turn the camera off.
Choosing a USB Option for Connection to a Computer
Consult the following table when choosing a USB option
for connection to a computer ( 55). The default option
is PTP. For more information on menu operations, see
“Using Menus” ( 17).
Connecting to Televisions, Computers, and Printers
Pictures transferred using:
Computer operating system
Camera button*
PictureProject
button
Windows XP
Choose Mass Storage or PTP.
Windows 2000 Professional
Windows Millennium Edition (Me)
Choose Mass Storage.†
Windows 98 Second Edition (SE)
Mac OS X 10.1.5 or later
Choose PTP.
Choose Mass Storage or PTP.
* Can not be used to transfer pictures if memory card is locked ( 13) or if Mass Storage
is selected for USB and no memory card is inserted. Use PictureProject Transfer button.
Pictmotion movies can be transferred in PictureProject ( 52).
† Do NOT select PTP. If PTP is selected when the camera is connected, wait until the Windows hardware wizard is displayed, then click Cancel and disconnect the camera. Select
Mass Storage in the camera USB menu before reconnecting the camera.
Disconnecting the Camera
If PTP is selected for USB, turn the camera off and disconnect the USB cable.
If Mass Storage is selected for USB, remove the camera from the system as described below before turning the camera off and disconnecting the USB cable.
• Windows XP Home Edition/Windows XP Professional: Click the
“Safely Remove Hardware” icon ( ) in the taskbar and select Safely remove USB Mass Storage Device.
• Windows 2000 Professional: Click the “Unplug or Eject Hardware” icon ( ) in the taskbar and select Stop USB Mass
Storage Device.
• Windows Millennium Edition (Me): Click the “Unplug or Eject
Hardware” icon ( ) in the taskbar and select Stop USB
Disk.
• Windows 98 Second Edition (SE): In My Computer, right click
on the removable disk corresponding to the camera and
select Eject.
• Macintosh: Drag the untitled camera volume (“NO NAME”)
into the Trash.
56
Printing Pictures Via USB
Users of PictBridge- or ImageLink-compatible printers can connect the camera directly to the printer and print pictures without using a computer.
Take photographs
Use Print set to select pictures for printing ( 61)
Connect USB cable to PictBridge printer (
Print pictures one
at a time ( 59)
Print multiple
pictures ( 60)
Print current print
order (DPOF
printing; 60)
Place camera in
ImageLink printer
dock and print pictures from printer
( 62)
Other Ways to Print Pictures
Pictures can also be printed by:
• Inserting a memory card in the printer: If the printer is equipped with a card slot, a memory
card can be inserted in the printer and pictures printed directly from the card. If the
printer supports DPOF, the camera Print set option can be used to select pictures for
printing ( 61). See the printer manual for details.
• Taking memory cards to a digital print service: If the service supports DPOF, the camera Print
set option can be used to select pictures for printing ( 61).
• Transferring pictures to a computer: Once transferred to a computer ( 54–55), pictures can
be printed using imaging software. See the application and printer manuals for details.
• Sending pictures to a printer over a wireless network: Pictures can be transmitted to a printer
connected to a computer on a wireless network ( 73).
Printing the Date of Recording on Pictures
Two options are available for printing the date of recording on pictures: Date imprint (
87) and Print set > Date ( 61).
Date imprint
Must be set before picture is taken
Date permanently imprinted on picture
Print set > Date
Set after picture is taken
Date stored separately
Date only appears when picture is printed
Date appears whenever picture is printed
on DPOF-compatible printer
The date only appears once; Print set > Date can not be used to print two dates on pictures with a date imprint.
57
Connecting to Televisions, Computers, and Printers
Disconnect USB cable
58)
Connecting the Printer
Connecting to Televisions, Computers, and Printers
1
Turn the camera off.
2
Connect COOL-STATION to the printer using the
supplied USB cable.
3
4
Turn the printer on.
58
USB
PTP (the default option) must be selected for Interface > USB in the camera setup
menu before the camera can be connected to a printer ( 89).
Place the camera in the COOL-STATION and turn it
on. A PictBridge start-up screen will be displayed.
The camera will then enter full-frame playback
with the PictBridge logo displayed in the monitor.
Printing Pictures One at a Time
1
2
Select picture.*
Display print options.
* To choose picture from thumbnail list, press zoom control to W
( ) and use rotary multi selector to highlight desired picture, or
press zoom control to T ( ) to exit to full-frame playback.
Highlight option and press :
Option
Description
Start printing. To cancel before all copies have been printed, press .
Start
Camera returns to PictBridge playback display when printing is complete;
print
repeat from Step 1 to print additional pictures.
Copies Choose number of copies (up to 9).
Choose from Default (the default page size for
the current printer), 3.5 x 5 in., 5 x 7 in., Postcard,
Paper
100x150mm, 4 x 6 in., 8 x 10 in., Letter, A4, and
size
A3. Only sizes supported by the current printer
will be displayed.
Paper Size
Paper size can not be selected from the camera if the printer does not support the page sizes
used by the camera or the printer automatically selects the page size. Use the printer to select
page size.
59
Connecting to Televisions, Computers, and Printers
3
Printing Multiple Pictures
To print multiple pictures, press the
button while
the PictBridge playback screen is displayed ( 58).
The menu shown at right will be displayed; highlight
an option and press the button.
Connecting to Televisions, Computers, and Printers
Option
Description
Print selection Print selected pictures (see below).
Print all images Print one copy of all images.
Menu shown at right displayed. Highlight option
and press :
• Start print: Print current print order ( 61).
DPOF printing
• Confirm: View print order ( 61, Step 4). Press
to start printing, or press
to exit.
• Cancel: Exit without printing.
Paper size
Choose page size ( 59, Step 3).
Printing Selected Pictures
Choosing Print selection displays the menu shown in Step 1.
1
Scroll through pictures. Current picture
shown at center of display.
3
60
2
Select picture and set number of prints to
1. Selected pictures marked by icon.
Choose number of prints (up to 9). To deselect picture, press rotary multi selector
down when number of prints is 1. Repeat
steps 1–3 to select additional pictures.
4
5
Confirm selection (to return to step 1 and
change selection, press
button).
* Press
Start printing. PictBridge menu is displayed when printing is complete.*
again to cancel before printing is complete.
Creating a DPOF Print Order: Print Set
1
2
Highlight Print selected.
Display selection dialog.
* To delete current print order, highlight Delete print set and press
3
4
.
Select pictures as described in Steps 1–3 of “Printing Selected Pictures” (
60).
Highlight option and press :
• Date: Print date of recording on all pictures
in print order.
• Info: Print shutter speed and aperture on
all pictures in print order.
• Done: Complete print order and exit. Pictures in print order are shown by icon during playback ( 6–7).
Print Set
Date and Info are reset each time the menu shown Step 4 is displayed. Info is not printed
when the camera is connected directly to the printer.
61
Connecting to Televisions, Computers, and Printers
The Print set option in the playback menu ( 80) is used to create digital “print
orders” for printing on DPOF-compatible devices ( 100). Selecting Print set displays the menu shown in Step 1.
ImageLink
Use the supplied PV-11 dock insert to print pictures on an ImageLink printer (
100). See the printer manual for details.
Connecting to Televisions, Computers, and Printers
1
Attach the dock
supplied
insert
printer
to theinsert
printer.
to the printer.
2
Turn the camera off and attach it to the dock insert. The camera will turn on automatically.
3
Print pictures as described in the printer manual.
USB
PTP (the default option) must be selected for Interface > USB in the camera setup menu before the camera can be connected to a printer.
To remove the dock insert, place your thumbs where
indicated, press, and lift.
ImageLink
The monitor will turn off automatically if no operations are performed for about one minute
while the camera is connected to an ImageLink printer. If no operations are performed for
another seven minutes, the camera will turn off.
If the printer does not support the language selected in the camera setup menu, menus will
be displayed in English.
62
Wireless Transfer and Printing
Using the camera’s built-in IEEE 802.11b/g wireless transmitter, you can:
• Transmit pictures to a computer for storage and editing ( 71–72)
• Save pictures directly to the computer hard disk as they are taken ( 73)
• Print pictures on a printer connected to a wireless network ( 73; if the optional
PD-10 wireless printer adapter is used with a PictBridge printer, the printer need
not be connected to a computer)
Connecting to a Wireless Network
Wireless transfer and printing requires a wireless local-area network (LAN) compatible with the IEEE 802.11b/g standard. The network can consist of the camera in
peer-to-peer communication with a single computer equipped with a wireless LAN
adapter (ad-hoc mode; IEEE 802.11b only) or of a camera connected to a wireless
network via a wireless LAN access point (infrastructure mode).
Ad-hoc (peer-to-peer) network
Computer with built-in or
external wireless LAN adapter
Infrastructure network
Wireless LAN
access point
Channel
Set the wireless LAN adapter or access point to a channel between 1 and 11 (inclusive).
During Transfer
The camera strap eyelet may become hot during transfer (i.e., when the wireless transfer LED
is lit or blinking). Observe due caution when handling the camera.
63
Wireless Transfer and Printing
Wireless transfer is available with computers running Windows XP Home Edition/
Windows XP Professional Service Pack 1 or later (Service Pack 2 or later recommended) or Mac OS X version 10.3 or later. To configure the camera for use with
the wireless network, you will also need the Wireless Camera Setup Utility, which is
installed with Picture Project; see the Quick Start Guide and the PictureProject Reference Manual (on CD) for installation instructions.
Configuring the Camera
Follow the steps below to copy wireless settings to the camera via USB. For details,
see pages 65–68. Information on the settings required for manual setup in Steps
8 and 9 may be found on page 69. Help can be displayed by clicking Help at any
stage; to cancel setup, click Cancel at any time.
Wireless Transfer and Printing
1
2
3
Confirm that PTP is selected for Interface > USB in the camera setup menu.
4
Check that the computer supports wireless LAN.
5
Connect the COOL-STATION to the computer using the supplied USB cable and turn the camera on.
6
Choose one of the following options.
Create an
Create an Ad-hoc
Create Infrastructure
(Camera to Com- (Access Point) and Ad-hoc
Infrastructure
(Access Point)
puter) network
(Camera to Computer)
network profile
profile
network profiles
7
8
Enter a profile name and choose the icon that will appear in the camera profile list.
Turn the camera off and place it in the COOL-STATION.
Start the Wireless Camera Setup Utility and check that the camera is powered by the AC adapter or the battery is fully charged.
Enter wireless network settings.
8
Create
Profile
manually
• Fixed IP addressing
• Windows XP SP2
not configured
for wireless LAN
• Windows XP SP1
• Macintosh
Enter wireless network settings.
Enter a profile name and choose the icon
that will appear in the camera profile list
in ad-hoc mode (see Step 7).
9
10
64
Select a printer for wireless printing.
Enter TCP/IP settings.
The steps on the preceding page are described in detail below. To prevent the
camera from turning off unexpectedly before setup is complete, use the supplied
AC adapter or be sure the battery is fully charged.
1
Confirm that PTP is selected for Interface > USB
in the camera setup menu ( 56, 89).
2
Turn the camera off and place it in the COOLSTATION.
3
Start the Wireless Camera Setup Utility.
• Windows: Click the Start button and select All
Programs > Nikon > Wireless Camera Set-
up Utility.
• Macintosh: Open the “Applications : Nikon Software : Wireless Camera Setup Utility” folder
Wireless Transfer and Printing
and double-click the Wireless Camera Setup Utility icon.
The dialog at right will be displayed; click Next.
If the Wireless Camera Setup Utility Is Not Installed
If the Wireless Camera Setup Utility is not already installed,
insert the yellow installer CD supplied with the camera in a
CD-ROM drive and start the installer as described in the Quick
Start Guide. In the “Install Center” window, click Wireless
Camera Setup Utility. The Wireless Camera Setup Utility
will start automatically when installation is complete. The
“Profiles” and “Wireless Printing” tabs are not available during
the initial installation run.
65
Confirm that the computer is equipped for wireless LAN and click Next. For more information,
click Help.
5
Connect the COOL-STATION to the computer using the supplied USB cable and turn the camera
on. Click Next to proceed.
• Windows: If the computer is not configured for
wireless LAN, uses fixed IP addressing, or is runVaries with
ning Windows XP Service Pack 1, the dialog setup type
shown in Step 7 will be displayed. Otherwise
proceed to Step 6.
• Macintosh: Proceed to Step 7.
6
If the computer uses more than one wireless LAN
adapter or access point, choose the adapter or access point the camera will use from the pull-down
menu, then choose the network type (the options
available vary with the existing network configuration):
• Create an Infrastructure (Access Point) network profile:
Connect to an existing infrastructure network.
• Create an Ad-hoc (Camera to Computer) network profile (not available if the computer is already part of a wireless network or uses a fixed IP beginning with
an address other than 169.254): Create a wireless network consisting only of
the camera and the computer. Recommended for first-time users of wireless networks.
• Create Infrastructure (Access Point) and Ad-hoc (Camera to Computer) network profiles:
Connect to an ad-hoc network in one location and infrastructure networks
in others.
• Create Profile manually: Adjust settings manually.
Click Next to proceed to Step 7.
Wireless Transfer and Printing
4
66
Enter a profile name of up to sixteen characters
and choose the icon that will appear in the camera profile list ( 70). Click Next to proceed. If
Create an Ad-hoc (Camera to Computer) network profile
was selected in Step 6, the dialogs shown in Steps
8 and 9 will not be displayed; proceed to Step 10.
8
If Create an Infrastructure (Access Point) network profile or Create Infrastructure (Access Point) and Ad-hoc
(Camera to Computer) network profiles was selected
in Step 6, enter the name (SSID) of the infrastructure network. If Create Profile manually was selected
or the dialog shown in Step 6 was not displayed,
supply any settings that are not provided automatically ( 69). Click Next to proceed. If Create Profile manually was selected in Step 6 or the dialog shown in Step 6 was
not displayed, proceed to Step 9. If Create an Infrastructure (Access Point) network
profile was selected, proceed to Step 10. If Create Infrastructure (Access Point) and
Ad-hoc (Camera to Computer) network profiles was selected, enter a profile name
and choose the icon that will appear in the camera profile list in ad-hoc mode
and then proceed to Step 10.
Profiles
A separate profile must be created for each network to which
the camera is connected. In addition, the Wireless Camera
Setup Utility must be installed on any computer to which pictures are transferred. The camera can store up to nine profiles
for different computers or printers; before additional profiles
can be created, existing profiles must be deleted. To view
existing profiles, connect the camera via USB and start the
Wireless Camera Setup Utility as described on the preceding
pages, and then select the “Profiles” tab. Profiles selected in
the “Profiles” tab can be edited, renamed, or deleted using the
View Profile, Rename, and Delete buttons.
Ad-hoc Mode
In ad-hoc mode, the IP address will begin with 169.254. If the computer later becomes part
of an infrastructure network, it must be reconfigured for automatic IP addressing and the
camera wireless profile modified to reflect the new settings.
67
Wireless Transfer and Printing
7
9
Enter TCP/IP settings (
10
If desired, select the printer that will be used for
wireless printing with this profile ( 73).
• Windows: Select a printer from the pull-down
down menu.
69) and click Next.
• Macintosh: Click Select Printer… and select a
printer, print quality, and so on. Click Print to
return to the Wireless Camera Setup Utility.
Click Next to proceed.
Wireless Transfer and Printing
11
Click Close.
12
Turn the camera off and remove it from the COOLSTATION.
68
Wireless Network Settings
The Wireless Camera Setup Utility may require information on some or all of the
following wireless network settings:
MAC Address Filtering
If the wireless network uses MAC address filtering, you will need to supply the filter with the
camera’s MAC address. Choose Firmware version from the camera setup menu ( 89) and
note the camera MAC address.
Port Numbers
The camera uses UDP port 5353 and TCP port 15740. If you are using a firewall, you will need
to configure it to leave these ports open.
69
Wireless Transfer and Printing
Item
Description
Network Name (SSID) Enter a name for the wireless network or choose from a list of existing
(required)
networks. Do not change the name if it is supplied automatically .
• Camera to Computer (Ad-hoc): The network is ad-hoc if it consists only of
Type
the camera and the computer.
(required)
• Access Point (Infrastructure): Infrastructure networks include a wireless access point connected to a local-area network.
The channel used for peer-to-peer wireless communication (ad-hoc
Channel
networks only). Choose from channels 1–11.
The type of authentication used by the computer or access point. The
Authentication camera supports WPA-PSK (infrastructure mode only), open system, and
shared key authentication.
The type of encryption (if any) used on the network. Depending on the
authentication used, the following types of encryption are available:
Security
• Open: none, WEP 64-bit, WEP 128-bit
• Shared: WEP 64-bit, WEP 128-bit
• WPA-PSK: TKIP
If the network uses WEP encryption, note whether the key is base 16
Security Key Format
(uses only the numbers 0–9 and the letters a–f ) or ASCII.
Security Key
If the network uses TKIP or WEP encryption, enter the network key.
In infrastructure networks that use WEP encryption, enter the host or acKey Index
cess point key index. The default index is 1.
Configure
Note whether the network is configured to supply IP address automati(required)
cally (the default setting) or manually.
If the network is configured for manual IP addresses, enter the IP address
IP address
that will be assigned to the camera.
Connecting to the Network
After creating a network profile, you can connect to the network by selecting the
profile from a list. Turn the camera on, select shooting mode, and follow the steps
below:
1
2
Display shooting mode menu.
3
Highlight
1/2
CHOOSE PROFILE
Profile-A
Profile-B
Profile-C
Confirm
4
.
1/2
CHOOSE PROFILE
Profile-A
Profile-B
Profile-C
Confirm
Info
Info
Highlight profile.*
Display profile list.
* To view settings for the selected profile, press the zoom control to T ( ). If you are unable
to connect, check these settings to make sure they match those used on the network. If
the last session with the selected device did not terminate normally, the camera will briefly
display a message stating that the session is now complete.
Wireless Transfer and Printing
5
WIRELESS MENU
Easy Transfer (PM)
Easy Trans. (no PM)
Shooting Date
Selected Images
Shoot & Transfer
Confirm
1/2
Help
Select profile. † If network profile is selected,
wireless transfer menu shown at left will be
displayed when connection is established.
If printer profile is selected, wireless printer
menu will be displayed ( 73).
† To select another profile, repeat Steps 1–5.
Auto Power Off
While the camera is in (wireless) mode, data transmission will continue after the camera
monitor turns off to save power (auto power off ; 88).
70
Wireless Transfer
When a network profile is selected from the profile
list ( 70), the menu shown at right will be displayed.
Highlight an option and press the button. The message “Connecting to (profile name)” will be displayed
while the camera connects. To exit before a connection is established, press again.
WIRELESS MENU
Easy Transfer (PM)
Easy Trans. (no PM)
Shooting Date
Selected Images
Shoot & Transfer
Confirm
1/2
Help
71
Wireless Transfer and Printing
Option
Description
Easy Transfer (PM) Transfer all new pictures and Pictmotion movies (Windows only). Some
(default)
time may be required to transfer Pictmotion movies.
Easy Trans. (no PM) Transfer all new pictures. Pictmotion movies are not transferred.
Transfer all pictures taken on selected date(s). Once
SHOOTING DATE
connection has been established, list of dates will
2006.6.10
5
be displayed with number of pictures taken on
2006.5.30
3
Shooting Date each date. Rotate rotary multi selector to highlight
2006.5.15
2
date, press to right to select, left to deselect. Selectimages
0
ed dates are marked with icon. Press to begin
Confirm Off On
Exit
transfer, or press
to exit to profile list.
Transfer selected pictures. Once connection has
SELECTED IMAGES
been established, dialog shown at right will be displayed. Rotate rotary multi selector left or right to
Selected Images scroll through pictures, press up to select picture at
center of display for transfer, down to deselect. Se- 2 0 0 6 . 0 5 . 1 5
4
5
15:30
lected pictures are marked with icon. Press to
Exit
Confirm
begin transfer, or press
to exit to profile list.
Shoot & Transfer Transfer pictures to computer as they are taken ( 73).
Marked Images Transfer all pictures marked with icon ( 81, 89).
If PictureProject is installed on destination computer, PictureProject
Transfer will start. Transfer pictures as described in PictureProject referPC Mode
ence manual (on CD). If PictureProject is not installed, pictures can be
copied to computer by drag and drop. Choose this mode to transfer selected Pictmotion movies (Windows only).
To transfer Pictmotion movies (Windows only), select Easy Transfer (PM) or PC Mode.
During transfer, the dialog shown at right is displayed.
Signal strength is indicated by the antenna icon at the
top of the dialog, varying from “strong” (four bars) to
“no signal” (antenna icon turns red). For maximum signal strength, ensure a clear line of sight between the
camera antenna and the wireless LAN adapter or access point. To cancel transfer, press the button.
Transferring images to computer
0002/0006
Cancel
If PictureProject is not installed on the destination computer, pictures transferred
in modes other than PC Mode will be saved to the “PictureProject” folder in “My
Pictures” (Windows) or “Pictures” (Macintosh). In PC Mode, the destination folder
can be selected in Windows Explorer (Windows) or the Finder (Macintosh) and pictures transferred via drag and drop. If PictureProject is installed, pictures transferred
in modes other than PC Mode will automatically be displayed in PictureProject
after transfer, and the destination directory can be changed in the PictureProject
“Transfer Options” dialog.
When transfer is complete, the message shown at right
will be displayed. Press the button to transfer additional pictures. To exit wireless transfer mode, turn the
camera off or press the
button and select another
mode.
TRANSFER COMPLETED
Shooting Date
Wireless Transfer and Printing
The Wireless Status LED ( 2)
The camera wireless status LED shows data transfer status as follows:
• LED blinks: Camera searching for connection or in power-saving mode
• LED on: Connection established or data transfer in progress
• LED off: Not connected
The
The (
( ) Button
) button can not be used to transfer pictures when the camera is in wireless mode.
Memory Cards
Pictures can not be transferred when a locked (write-protected) memory card is inserted in
the camera. Unlock the card before insertion.
72
Saving Pictures Directly to the Computer: Shoot & Transfer
Once a wireless connection has been established in Shoot & Transfer mode, the
camera monitor will display the view through the lens. Pictures are transferred directly to the computer as they are taken. The next picture can be taken when
transfer is complete. The camera uses the last option selected for image mode; all
other shooting menu settings are set to default values.
Pressing the
tions:
button in Shoot & Transfer mode displays the following op-
Item
Description
Confirm Transfer Select On to display confirmation message before picture is transferred.
Select On to save copy of each picture to internal memory or camera memSave Images ory card. If Off is selected, pictures are saved to the computer only ( 103;
note that pictures may be lost if an error occurs during transfer).
Wireless Printing
Wireless Printing
Print selection
Print all images
DPOF printing
Paper size
Confirm
The PD-10 Wireless Printer Adapter
The PD-10 wireless printer adapter (available separately) can
be connected to any PictBridge-compatible printer with a
type A (flat) USB connector, allowing pictures to be printed
without connecting the printer to a computer.
When printing pictures via the PD-10 for the first time, choose wireless mode and display the
profile list as described in Steps 1–3 on page 70, then follow the steps below:
1. Connect the PD-10 to the printer and turn the printer on.
2. Press the START button on the PD-10.
3. Once the LINK lamp on the PD-10 has turned orange, press the camera
button. The
message “Connecting to wireless printer adapter” will be displayed. Set up profiles on the
camera and PD-10 as described in the PD-10 instruction manual, starting from Step 3.
Once the profile is stored in the camera, pictures can be printed by selecting the PD-10 in the
profile list ( 70). For more information, consult the instructions provided with the PD-10.
73
Wireless Transfer and Printing
If a printer profile is selected from the profile list (
70), the camera will display the message “Connected to
printer” followed by the wireless printing menu shown
at right. Print pictures as described on pages 57–61.
Note that pictures can not be printed if the printer is
off.
Menu Guide
This section describes the menus available for shooting, playback, and camera setup. See page 17 for information on using the menus.
Shooting Options: The Shooting Menu
To display the shooting menu, select
mode ( 18) and press the
button.
With the exception of Image mode, the following options are available only in
mode. Unless Reset all ( 89) is used to reset settings to their default values (
101), settings in this menu will be restored the next time mode is selected.
Option
Description
SET UP
Display the setup menu.
Image mode
Choose image size and quality.
White balance* Match white balance to the light source.
Exp. +/–
Adjust exposure for very bright or very dark subjects.
Continuous*
Take pictures one at a time or in a sequence.
BSS*
Use BSS to choose the sharpest picture.
Sensitivity
Control camera’s sensitivity to light.
Color Options* Control color.
AF area mode Choose where the camera focuses.
* See the Appendix for information on restrictions that may apply to these settings (
83
74
75
76
76
78
78
79
79
102).
Image Mode
Pictures taken with a digital camera are recorded as image files. The size of the files,
and with it the number of images that can be recorded ( 102), depends on the
size and quality of the images (image mode). Before shooting, choose an image
mode according to how you plan to use the picture.
The Shooting Menu
Option
Size (pixels)
★
High (2816 )
2,816 × 2,112
Normal (2816)
2,816 × 2,112
Normal (2048)
2,048 × 1,536
PC screen (1024) 1,024 × 768
TV screen (640)
640 × 480
Description
Pictures are compressed less than Normal, producing higher quality images.
Best choice in most situations.
Smaller size allows more pictures to be stored.
Suited to computer display.
Suited to e-mail or television viewing.
The current setting is shown by an icon in the display (
6–7).
Shooting Menu Settings
See the Appendix for information on shooting menu defaults (
101).
74
White Balance
Process pictures to produce natural colors under different types of light.
Option
Description
White balance automatically adjusted to suit lighting conditions.
Best choice in most situations.
Neutral-colored object used as reference to set white balance unWhite bal. preset
der unusual lighting conditions (see below).
Daylight
White balance adjusted for direct sunlight.
Incandescent
Use under incandescent lighting.
Fluorescent
Use under most types of fluorescent lighting.
Cloudy
Use when taking pictures under overcast skies.
Use with the flash.
Flash
Auto
At settings other than Auto, the current setting is shown by an icon in the display
( 6–7).
Preset White Balance
Preset white balance is used with mixed lighting or to compensate for light sources
with a strong color cast (for example, to make pictures taken under a lamp with a
red shade look as though they had been taken under white light).
1
Place white or gray reference object under lighting that will be used during
shooting.
2
3
4
The Shooting Menu
Highlight White bal. preset.
Camera zooms in.
5
Frame
reference
object here
Highlight Measure.*
Frame reference object.
* To restore most recent value for preset white balance, highlight Cancel and press
.
Preset White Balance
Preset white balance can not be measured with the flash.
75
Preset white balance set to new value.
6
Exp. +/–
Exposure compensation is used to alter exposure from the value selected by the
camera. Choose from values between –2.0 EV and +2.0 EV in increments of / EV.
Negative values produce darker pictures, positive values brighter pictures. The effects can be previewed in the display; at settings other than zero, the current value
for exposure compensation is also shown ( 6–7).
Continuous
Capture a fleeting expression on a portrait subject, photograph a subject that is
moving unpredictably, or capture motion in a series of pictures. At settings of Continuous and Multi-shot 16, the flash turns off and focus, exposure, and white
balance are fixed at the values for the first picture in each series.
Option
Single
Continuous
Multi-shot 16
Description
One shot is taken each time shutter-release button is pressed.
While shutter-release button is pressed, camera takes pictures at
up to 2.2 frames per second (fps).
Each time shutter-release button is
pressed, camera takes 16 shots at about
2 fps and arranges them in a single picture as shown at right. Image mode set
to Normal (2816).
The Shooting Menu
Intvl timer shooting Camera takes pictures automatically at specified interval (
Except at Single, the current setting is shown by an icon in the display (
76
77).
6–7).
Interval Timer Photography
To display the interval timer menu, highlight Intvl timer shooting in the CON
TINUOUS menu ( 76) and press the button. To prevent unexpected loss of
power, charge the battery before shooting begins.
1
2
Choose interval between shots. Press
button to make selection, then press
button to return to shooting mode.
Press shutter-release button all the way
down to start recording. Camera will take
pictures at specified interval until shutterrelease button is pressed again, memory
is full, or 1800 frames have been recorded.
Monitor turns off and indicator lamp blinks
green between shots.
The Shooting Menu
Interval Timer Photography
See the Appendix for more information on how pictures taken with interval timer photography are stored ( 103).
77
Best Shot Selector (BSS)
BSS is recommended for situations in which inadvertent camera movement can
produce blurred pictures, or when parts of the image are prone to under- or overexposure. It may not produce the desired results if the subject moves or the composition is changed while the shutter-release button is fully pressed.
Option
Off
Description
BSS off.
Camera takes shots while shutter-release button is pressed, to a maximum
of ten. These images are then compared and sharpest picture (picture
On
with highest level of detail) is saved. Flash turns off automatically and
focus, exposure, and white balance for all photos are determined by first
picture in each series.
Selecting this option displays sub-menu shown at
right. Choose from:
• Highlight BSS: picture with smallest area of overexposure is selected.
• Shadow BSS: picture with smallest area of underexposure is selected.
Exposure
• Histogram BSS: of pictures with least under- and over-exposure, camBSS
era chooses picture with overall exposure closest to optimum.
Camera takes five shots each time shutter-release button is pressed, but
only picture that best meets selected criterion is saved. Flash turns off
automatically and focus and white balance for all photos are determined
by first picture in each series. Recommended for high-contrast subjects,
when it is difficult to set exposure correctly.
At settings other than Off, the current BSS setting appears in the display (
6–7).
The Shooting Menu
Sensitivity
Sensitivity is a measure of how quickly the camera reacts to light. The higher the
sensitivity, the less light needed to make an exposure. Much as film with a high
ISO rating tends to produce “grainy” images, high sensitivities may however be associated with “noise”—randomly spaced, brightly colored pixels concentrated in
dark parts of the image. Choose from values between ISO 50 and 400 equivalent.
Auto is equivalent to ISO 50 under normal conditions; when lighting is poor and
the flash is off, the camera compensates by raising Sensitivity to a maximum of ISO
200 equivalent.
The current Sensitivity is displayed in the monitor at settings other than Auto
( 6–7). If Auto is selected, an ISO icon will be displayed when sensitivity is raised
above ISO 50 equivalent.
78
Color Options
Make colors more vivid or record pictures in monochrome.
Option
Standard color
Vivid color
Black-and-white
Sepia
Cyanotype
Description
Natural color.
Vivid, “photoprint” colors.
Take pictures in black-and-white.
Record pictures in sepia.
Take pictures in blue-tinted monochrome.
The effects of the selected option can be previewed in the monitor. At settings
other than Standard color, the current setting is also indicated by an icon in the
display ( 6–7).
AF Area Mode
Choose where the camera focuses.
Option
Description
Center Camera focuses on subject at center of frame.
Press rotary multi selector up, down, left, or right to select from 99 focus areas in large frame shown at right.
Pictures can be taken while focus area selection screen
Manual is displayed. To end focus area selection and adjust
flash, macro close-up, and self-timer settings, press
button. Press button again to change selection.
Focus area
Focus Lock
To focus on off-center subjects when Center is selected for AF area mode:
Position subject in center of frame.
3
Recompose picture with shutter-release
button pressed halfway.
2
Press shutter-release button halfway and
check focus.
4
Take picture.
79
The Shooting Menu
1
Playback Options: The Playback Menu
To display the playback menu, press the
button to select playback mode (
19) and press the
button. See page 17 for more on using the menus.
Option
Description
SET UP
Display the setup menu.
Print set
Select pictures for printing.
Slide show
View pictures in an automatic slide show.
Delete*
Delete all or selected pictures.
Protect*
Protect selected pictures from accidental deletion.
Transfer marking* Change transfer marking for existing pictures.
Small pic.
Create a small copy of the current picture.
Copy*
Copy files between memory card and internal memory.
* To select multiple pictures for deletion, protection, transfer, or copying:
1
2
Scroll through pictures. Current picture
shown at center of display.
3
83
61
81
81
81
81
82
82
Repeat steps 1–2 to select additional pictures. To deselect picture,
highlight and press rotary multi selector down.
Select current picture. Selection shown
by icon.
4
The Playback Menu
Complete operation. Confirmation
message may be displayed.
Print Set
Create digital “print orders” for PictBridge printers and devices that support DPOF
( 61).
80
Slide Show
Selecting Slide show displays the following options. Rotate the rotary multi selector to highlight and press the button to select.
Option
Description
Frame intvl Choose length of time each slide will be displayed.
If this option is checked, slide show will repeat until
Loop
button is pressed.
Start
Start slide show.
While the slide show is in progress, rotate the rotary multi selector clockwise to skip
ahead, counter-clockwise to rewind. To pause the slide show, press the button.
When the slide show ends or is paused, the menu shown at
right will be displayed. Highlight Restart and press the
button to restart the show, or select End to end the show and
return to the playback menu.
Pause
End
Restart
Confirm
Delete
Choose Erase all images to delete all pictures, Erase selected image(s) to select
pictures for deletion ( 80). Pictures marked with a icon will not be deleted.
Protect
Protect selected pictures from accidental deletion. Protected pictures are marked
with a icon ( 6–7) and can not be deleted using the
button or Delete.
Note, however, that formatting will delete protected files ( 89).
Transfer Marking
Mark existing pictures for transfer to a computer (
55).
Pictures selected for transfer are identified by a
icon (
6–7).
Slide Shows
Movies ( 38) appear as still images showing the movie’s first frame. The camera will turn off
automatically ( 88) if no operations are performed for 30 minutes during the show, even if
Loop is selected.
81
The Playback Menu
Option
Description
All on
Mark all images for transfer.
All off
Remove transfer marking from all images.
Select image(s) Mark selected pictures for transfer ( 80).
Small Pic.
Create a small copy of the current picture. Highlight a size and press
.
Option
Description
640 × 480 Suited to television playback.
320 × 240 Suited to display on web pages.
160 × 120 Suitable for e-mail.
A confirmation dialog will be displayed. Highlight Yes and
press the button to create a copy at the chosen size.
Small copies are stored as JPEG files with a compression ratio
of 1 :16 (see page 103 for more information). During playback,
copies are indicated by a gray border; a , , or
icon is
displayed when they are viewed full-frame ( 6–7).
Create small picture file?
No
Yes
Confirm
Copy
Copy pictures between internal memory and a memory card. This option is only
available when a memory card is inserted.
Option
Description
Copy pictures from internal memory to memory card.
Copy pictures from memory card to internal memory.
Selecting either of the above options displays the menu shown
at right. Choose Selected images to select the pictures that
will be copied ( 80) or All images to copy all pictures.
The Playback Menu
A confirmation dialog will be displayed. Highlight Yes and
press the button to copy the images.
Copy
Voice memos ( 46) will be copied with the associated picture, but voice recordings ( 39)
will not. See “Copying Voice Recordings” for information on copying voice recordings ( 42).
The camera may be unable to copy pictures that were created with another make of camera
or that have been modified on a computer. See page 103 for more information on how copies are stored.
82
Basic Camera Setup: The Setup Menu
To display the setup menu, select SET UP or from the shooting ( 74), playback
( 80), scene ( 26), movie ( 36), one-touch portrait ( 25), or voice recording
menus ( 40). See page 17 for more on using the menus. Settings remain in effect
until reset ( 89).
Option
Menus
Quick startup
Welcome screen
Date
Monitor settings
Date imprint
AF assist
Sound settings
Blur warning
Auto off
Format memory /
Format card
Language
Interface
Reset all
Firmware version
Description
Choose how menus are displayed.
Enable or disable welcome screen and start-up sound.
Select screen displayed when camera is turned on.
Set clock and choose home and destination time zones.
Adjust monitor brightness and choose display style.
Imprint date or birthday counter on pictures.
Enable or disable AF assist illumination.
Adjust sound and volume settings.
Turn blur warning on or off.
Choose when monitor will turn off to save power.
83
83
84
84
86
87
88
88
88
88
Format internal memory or memory card.
89
Choose language for camera menus and messages.
Adjust settings for connection to television or computer.
Restore camera settings to default values.
Display camera firmware version.
89
89
89
89
Menus
Choose how menus are displayed.
Icon
Quick Startup
Choose On to disable the welcome screen ( 84) and start-up sound. The camera
will be ready for shooting as soon as it is turned on.
Default Settings
See the Appendix for information on setup menu defaults (
101).
83
The Setup Menu
Text
Welcome Screen
Choose the welcome screen displayed when the camera is turned on. This option
is only available when Off is selected for Quick Startup.
Option
Description
Nikon COOLPIX logo displayed at start-up.
Animation Animation displayed at start-up.
Select picture from internal memory or memory card. Copy of selected image
Select an
is created for use in welcome screen and remains when original is deleted or
image
memory card is removed.
Date
Set the camera clock and choose home and travel destination time zones.
Option
Date
Description
Set camera clock to current date and time (see below).
Choose home ( ) or travel destination ( ) time zone (
Time zone
saving time on or off.
100); turn daylight
Selecting Date displays the menu shown in Step 1. Follow the steps below to set
the camera clock to the current date and time.
1
2
Edit Day (order of Day, Month,
and Year may differ).
The Setup Menu
3
Select Month. Repeat steps 1–2 to edit
Month, Year, hour, and minute.
4
Select D M Y.
Choose date display order. Press
return to setup menu.
to
The Clock Battery
The clock battery charges when the main battery is installed or an AC adapter is connected,
and can provide several days of backup power after about 10 hours of charging.
84
Selecting Time zone from the Date menu displays the dialog shown in Step 1. Follow the steps below to set the clock to the time in a new time zone.
1
2
Highlight
.
3
Set clock to time in travel time zone.
4
Display map of world time zones.
5
To change the home time zone, select
Highlight travel destination time zone.
Set clock to time in new time zone. is displayed when camera is in shooting mode.
To reset clock to home time zone, select
in time zone menu (Step 1). To turn daylight
saving time in selected zone on or off, highlight DaylightSaving and press . Clock
will automatically be advanced one hour.
Press
button to exit to shooting or playback.
in Step 1 and follow Steps 2–5.
The Setup Menu
85
Monitor Settings
The following options are available:
Option
Description
Photo info Choose information displayed in monitor.
Brightness Choose from five settings for monitor brightness (default is 4).
Photo Info
The following display options are available:
Display
Option
Description
Show info
Indicators are displayed in
monitor ( 6–7).
Auto info
Indicators are displayed for 5 s.
Hide info
Indicators are not displayed in
monitor.
Indicators are displayed in
monitor. In mode, framing
Framing grid grid is displayed to help frame
pictures; other indicators are
displayed for 5 s.
The Setup Menu
86
Shooting mode
Playback mode
Date Imprint
Imprint date information on pictures as they are taken.
Option
Off
Date
Date and time
Date counter
Description
Time and date do not appear on pictures.
Date or date and time are imprinted on pictures taken while this option is in effect.
Time stamp shows number of days between date of shooting and selected date (see below).
At settings other than Off, the option selected is indicated by an icon in the monitor during shooting ( 6–7).
Date Counter
Pictures taken while this option is in effect are imprinted with
the number of days remaining until or the number of days
elapsed since a specified date. Use it to track the growth of a
child or count down the days until a birthday or wedding.
Up to three dates can be stored. To
set, highlight, press rotary multi seStored
lector to right, and enter date (
dates
84). To select, highlight and press
button.
Press button to
view stored dates
Press button to
view display options
Display Highlight Number of days, Years and days, or Yrs,
options mnths, days and press button.
Sample date counter time stamps are shown below.
Past date (days elapsed)
Date Imprint
The date is recorded in the order selected in the DATE menu ( 84). Date imprint can not
be used to print date information on existing pictures. See page 57 for a comparison of date
imprint and Print set > Date.
Data imprinted at an Image mode setting of TV screen (640) may be difficult to read.
Choose PC screen (1024) or larger when using date imprint.
87
The Setup Menu
Future date (days remaining)
AF Assist
If Auto is selected, AF-assist illumination will be used to assist the focus operation
when the subject is poorly lit (AF-assist illumination is unavailable in some modes;
26–34). Choose Off to disable AF-assist illumination (note that the camera may
be unable to focus if lighting is poor).
Sound Settings
Adjust the following sound settings:
Option
Button
sound
Shutter
sound
Volume
Description
When On is selected, beep will sound once when operations are completed successfully, three times when error is detected.
Choose sound played when shutter is released (note that shutter sound may not
always play; 97). Choose Off to disable shutter sound.
Choose volume from Loud, Normal, and Off.
Blur Warning
Choose whether or not the blur warning is displayed (
may not always be displayed ( 97).
21). Note that the warning
Auto Off
Choose the time before the monitor turns off automatically to save power from
30 seconds, 1 minute (the default setting), 5 minutes, or 30 minutes. Regardless
of the option chosen, the monitor will remain on for 3 minutes when menus are
displayed, and for 30 minutes when Loop is selected during Pictmotion or slide
show playback or the camera is powered by the supplied AC adapter. While the
monitor is off, the power-on lamp will blink. The camera will turn off automatically
if no operations are performed for another three minutes.
The Setup Menu
88
Format Memory/ Format Card
If no memory card is inserted, this option is named Format memory and formats
internal memory. Otherwise it is named Format card and formats the memory
card for use in the camera. Note that formatting permanently deletes all pictures
and other data. Be sure to make copies as required before formatting. Formatting
a memory card also deletes any Pictmotion background tracks that may be present;
tracks can be copied to the card again when formatting is complete.
Two format options are available when a memory card is inserted: Quick format
(formats only areas of the card on which data are stored) and Format (formats
entire card). Format is not available when batteries are low.
Format
Do not turn the camera off, disconnect the AC adapter, or remove the battery or memory card
during formatting. Use the Format option to format memory cards before first use and reformat them regularly thereafter. Without regular formatting, performance will drop with use.
Language
Choose a language for camera menus and messages from the following options:
Čeština
Dansk
Deutsch
English
Español
Français
Indonesia
Czech
Danish
German
English
Spanish
French
Indonesian
Italiano
Nederlands
Norsk
Polski
Português
Русский
Suomi
Italian
Dutch
Norwegian
Polish
Portuguese
Russian
Finnish
Svenska
Swedish
Simplified Chinese
Traditional Chinese
Japanese
Korean
Thai
Interface
Adjust settings for connection to a computer or video device.
Reset all
Select Reset to restore camera settings to their default values (
101).
Firmware Version
View the current camera firmware version and MAC address.
89
The Setup Menu
Option
Description
USB
Select USB option for connection to computer ( 56, 65) or printer ( 58, 62).
Video mode Choose from NTSC and PAL ( 54).
Auto transfer Choose On to mark all new pictures for transfer to computer ( 55).
Technical Notes
Optional Accessories
At the time of writing, the following optional accessories and replacement items
were available for this camera. Contact your local retailer or Nikon representative
for details.
Rechargeable battery
Battery charger
AC adapter
Cradle
ImageLink-compatible printer adapter
Wireless printer adapter
USB cable
A/V cable
Rechargeable EN-EL8 Li-ion batteries
MH-62 battery charger
EH-64 AC adapter
MV-15 COOL-STATION
PV-11 Dock Insert
PD-10 wireless printer adapter
UC-E10 USB cable
EG-E5000 audio/video cable
Approved Memory Cards
The following memory cards have been tested and approved for use in the COOLPIX S6:
Panasonic 64 MB, 128 MB, 256 MB, 256 MB*, 512 MB, 512 MB*, 1 GB, 1 GB*
SanDisk 64 MB, 128 MB, 256 MB, 256 MB*, 512 MB, 512 MB*, 1 GB, 1 GB*
Toshiba 64 MB, 128 MB, 128 MB*, 256 MB, 256 MB*, 512 MB, 512 MB*, 1 GB
* High speed (10 MB/s)
Other cards have not been tested. For more details on the above cards, please
contact the manufacturer.
Technical Notes
Memory Cards
• Use only Secure Digital (SD) memory cards.
• Format memory cards before first use ( 89).
• Do not eject the memory card, turn the camera off, remove the batteries, or disconnect the
AC adapter during formatting or while data are being written to or deleted from the card.
Failure to observe this precaution could result in loss of data or damage to the camera or
card.
• Do not disassemble or modify.
• Do not drop, bend, or expose to water or strong physical shocks.
• Do not touch the metal terminals with your fingers or metal objects.
• Do not affix labels or stickers to the memory card.
• Do not leave in direct sunlight, closed vehicles, or areas exposed to high temperatures.
• Do not expose to high levels of humidity or to corrosive gas.
90
Caring for the Camera
To ensure continued enjoyment of this Nikon product, observe the following precautions when storing or using the device.
Handle the lens and all moving parts with care
The lens, monitor, and battery-chamber/
memory card slot and lens covers are easily
damaged. Do not use force. Force applied
to the lens cover could cause malfunction or
damage the lens. Should the monitor break,
care should be taken to avoid injury due to
broken glass and to prevent the liquid crystal
from the display touching the skin or entering
the eyes or mouth.
Do not point the lens at strong light sources for extended periods
Avoid framing the sun or other strong light
sources for extended periods when using or
storing the camera. Intense light may cause
deterioration in the image sensor, producing
a white blur effect in photographs.
Turn the product off before removing or disconnecting the power source
Do not unplug the product or remove the
battery while the product is on, or while images are being recorded or deleted. Forcibly
cutting power could result in loss of data or
in damage to product memory or circuitry. To
prevent an accidental interruption of power,
do not move the product while the AC adapter is connected.
Keep dry
The device will be damaged if immersed in
water or subjected to high levels of moisture.
Do not drop
The product may malfunction if subjected to
strong shocks or vibration.
Keep away from strong magnetic fields
Do not use or store this device in the vicinity
of equipment that generates strong electromagnetic radiation or magnetic fields. Strong
static charges or the magnetic fields produced by equipment such as radio transmitters could interfere with the monitor, damage
data stored on the memory card, or affect the
product’s internal circuitry.
Avoid sudden changes in temperature
Sudden changes in temperature, such as occur when entering or leaving a heated building on a cold day, can cause condensation
inside the device. To prevent condensation,
place the device in a carrying case or a plastic
bag before exposing it to sudden changes in
temperature.
The AF-Assist Illuminator LED
The light-emitting diode (LED;
2, 21) used
in the AF-assist illuminator conforms to the
following IEC standard:
CLASS 1 LED PRODUCT
IEC60825-1 Edition 1.2-2001
Technical Notes
Notes on the Monitor
• The monitor may contain a few pixels that are always lit or that do not light. This is a characteristic common to all TFT LCD displays, and does not indicate a malfunction. Images
recorded using the product will not be affected.
• When you frame bright subjects, vertical comet-like streaks that whiten toward either end
may appear in the display. This phenomenon, known as “smear,” does not appear in the final
photograph and does not indicate a malfunction. Some smear may appear in movies.
• Images in the monitor may be difficult to see in a bright light.
• The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact
your Nikon service representative.
91
Cleaning
Lens Avoid touching glass parts with your fingers. Remove dust or lint with a blower (typically a small device with a rubber bulb attached to one end that is pumped to produce a stream of air out the other). To remove fingerprints or other stains that can
not be removed with a blower, wipe the lens with a soft cloth, using a spiral motion
that starts in the center of the lens and works out to the edges. If this fails, clean the
lens using a cloth lightly dampened with commercial lens cleaner.
Monitor Remove dust or lint with a blower. To remove fingerprints and other stains, clean the
monitor with a soft, dry cloth, being careful not to apply pressure.
Body Use a blower to remove dust, dirt, or sand then wipe gently with a soft, dry cloth.
After using the camera at the beach or seaside, wipe off any sand or salt with a dry
cloth lightly dampened with fresh water, then dry thoroughly. Note that foreign
matter inside the camera could cause damage not covered under warranty.
Do not use alcohol, thinner, or other volatile chemicals.
Technical Notes
Batteries
• Check the battery level when taking the camera out and charge the battery if necessary
( 11). Do not continue charging once the battery is fully charged, as this will result in
reduced battery performance. If possible, carry a fully-charged spare battery when taking
pictures on important occasions.
• Do not use the battery at ambient temperatures below 0 °C (32 °F) or above 40 °C (104 °F).
During charging, the temperature should be in the vicinity of 5–35 °C (41–95 °F). Note that
the battery may become hot during use; wait for the battery to cool before charging. Failure
to observe these precautions could damage the battery, impair its performance, or prevent
it from charging normally.
• On cold days, the capacity of batteries tends to decrease. Be sure that the battery is fully
charged before heading outside to take pictures in cold weather. Keep spare batteries in a
warm place and exchange as necessary. Once warmed, a cold battery may recover some of
its charge.
• Dirt on the battery terminals can prevent the camera from functioning.
• When the battery is not in use, remove it from the camera or battery charger and replace
the terminal cover. The camera and battery charger draw minute amounts of current even
when off ; if left in place, the battery could be drained to the point that it no longer functions.
Turning the camera on or off while the battery is exhausted can result in reduced battery life.
If the battery will not be used for an extended period, store it in a cool (15 °C–25 °C / 59 °F–
77 °F), dry place. Recharge it at least once a year and run it flat before returning it to storage.
• Replace the battery when it no longer holds a charge. Used batteries are a valuable resource. Please recycle used batteries in accordance with local regulations.
92
Storage
Turn the camera off when not in use. Check that the power-on lamp is off before
putting the camera away and remove the batteries if the camera will not be used
for an extended period. Do not store the camera with naptha or camphor moth
balls or in locations that:
• are next to equipment that produces strong electromagnetic fields, such as televisions or radios
• are exposed to temperatures below –10 °C (14 °F) or above 50 °C (122 °F)
• are poorly ventilated or subject to humidities of over 60%
To prevent mold or mildew, take the camera out of storage at least once a month.
Turn the camera on and release the shutter a few times before putting the camera
away again.
Error Messages
The following table lists the error messages and other warnings that appear in the
monitor and how to deal with them.
Display
(blinks)
WARNING ! !
BATTERY EXHAUSTED
(● blinks red)
(blinks)
Problem
Clock not set.
Battery running low.
Solution
Set clock.
84
Prepare to charge or change battery. 10–11
Battery exhausted.
Charge or change battery.
10–11
Use focus lock to focus on another subCamera cannot focus. ject at same distance, then recompose 79
picture.
Use flash, or steady camera using triSlow shutter speed. Pic- pod, by placing camera on level sur18, 20
tures may be blurred.
face, or by holding camera in both
hands with elbows against torso.
WARNING ! !
Camera cannot perform
PLEASE WAIT FOR CAMERA
Message clears from display automatiother operations until
TO FINISH RECORDING
cally when recording is complete.
recording is complete.
Slide write-protect to “write” position.
13
Insert memory card.
12
• Use approved card.
• Check that connectors are clean.
• Confirm that memory card is correctly inserted.
90
—
12
93
Technical Notes
MEMORY CARD IS WRITE Write-protect switch is
PROTECTED
in “lock” position.
No memory card insertNO CARD PRESENT
ed in Pictmotion mode.
THIS CARD
CANNOT BE USED
Error accessing memory
card.
WARNING ! !
THIS CARD CANNOT BE READ
—
Display
CARD IS NOT
FORMATTED
Format
No
Problem
Solution
Memory card has not Highlight FORMAT and press butbeen formatted for use ton to format card, or turn camera off
in camera.
and replace card.
12
Technical Notes
Error occurred while re- Format internal memory or memory
89
cording picture.
card.
• Insert new memory card.
12
Camera has run out of • Select Reset all after either inserting 89
file numbers.
new memory card or formatting inIMAGE CANNOT BE SAVED
ternal memory or memory card.
or
Cannot create cropped, Select picture that supports crop,
103
D-lighting, or small copy. D-lighting, or small picture.
Picture cannot be used Choose picture 640 × 480 pixels or
—
for welcome screen.
larger.
Cannot copy picture.
Delete pictures from destination.
81
Image has already been
Original does not support D-lighting can not be used with copmodified.
103
D-lighting.
ies.
D-Lighting cannot be used.
SOUND FILE CAN
Select Reset all after either inserting
Camera has run out of
NOT BE SAVED
new memory card or formatting inter- 89
file numbers.
nal memory or memory card.
or
Time out error while re- Choose memory card with faster write
CANNOT RECORD MOVIE
90
cording movie.
speed.
74
• Choose smaller image size.
• Delete pictures or voice recordings. 41, 81
OUT OF MEMORY
Memory card is full.
• Insert new memory card.
12
or
• Remove memory card and use inter- 13
nal memory.
—
CARD CONTAINS NO IMAGES No pictures available for playback.
No sound files available for playback.
—
NO SOUND FILE
FILE CONTAINS
File not created with View file on computer or other deNO IMAGE DATA
—
vice.
THIS FILE CANNOT BE COOLPIX S6.
PLAYED BACK.
ALL IMAGES ARE HIDDEN No pictures available for welcome screen or slide show.
—
PICTMOTION CANNOT BE No pictures selected for Select pictures.
51
CREATED
Pictmotion movie.
PICTMOTION CANNOT BE Pictmotion files have Delete affected Pictmotion movie.
53
PLAYED BACK
been deleted or moved.
THIS IMAGE CANNOT BE Picture is protected.
Remove protection.
81
DELETED
94
Display
NEW CITY IS IN THE
CURRENT TIME ZONE
INITIALIZING LENS
CANNOT FOCUS
85
—
14
2, 14
64–69
54–55,
58
56
—
—
72
67
67
69
81
14
54–55
71–73
11, 14,
70
71–73
95
Technical Notes
Problem
Solution
Destination in same No need to change time zones if destitime zone as home.
nation is in same time zone as home.
Wait until message has cleared from
Camera cannot focus. display and camera has zoomed all
the way out.
Turn camera off and then on again. If
LENS ERROR
Lens error.
error persists, contact retailer or Nikon
representative.
Finger or other obstrucTurn camera off and remove obstrucLENS COVER ERROR
tion prevents lens cover
tion.
from opening.
Profile not registered. No wireless profiles Create profile.
Set up profile.
available.
USB cable disconnected If PictureProject displays error, click OK
during transfer or print- to exit. Resume after turning camera
ing.
off and reconnecting cable.
COMMUNICATIONS ERROR
USB option incorrect. Choose correct USB option.
PictureProject did not See the PictureProject reference manstart.
ual (on CD) for more information.
• Check that host computer or access
point is on.
• Check signal status and remove any
NETWORK CONNECTION Unable to connect to obstacles between camera and host
FAILED
wireless network.
computer or access point.
• Check network settings in Wireless
Camera Setup Utility.
• Check camera IP address settings in
Unable to connect to
Failed to connect to
Wireless Camera Setup Utility.
(name of host)
selected host.
• Check firewall settings.
NO IMAGES ARE MARKED No pictures selected for Select pictures for transfer and try
FOR TRANSFER
transfer.
again.
• Check battery level.
• USB: Check that cable is connected.
Transfer error.
• Wireless: Check signal status and reTRANSFER ERROR
move obstacles between camera
and wireless adapter or access point.
Turn camera off and recharge battery,
Battery exhausted durBattery exhausted.
then turn camera on and select wireTransfer terminated.
ing wireless transfer.
less mode.
Check signal status and remove any
Wireless transfer interobstacles between camera and wireConnection error.
rupted.
less adapter or access point.
Display
Problem
Solution
Turn camera off, remove and reinsert
Error has occurred in
batteries, and turn camera on. If error
SYSTEM ERROR
camera’s internal cirpersists, contact retailer or Nikon repcuitry.
resentative.
Check printer. To resume, highlight
PRINTER ERROR
CHECK PRINTER STATUS Printer error.
Resume (if available) and press .
14
—
Troubleshooting
If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon representative. Refer to the page
numbers in the right-most column for more information.
Problem
Camera turns off
without warning
Monitor is blank
•
•
•
•
•
•
•
•
•
•
Solution
Battery is low.
14
Camera has turned off automatically to save power.
14
Battery is cold.
106
Camera is off.
14
Battery is exhausted.
14
Standby mode: monitor turns on when controls are used.
14
Flash lamp blinks red: wait until flash has charged.
20
USB cable is connected.
55, 58
A/V cable is connected.
54
Time lapse or interval timer photography in progress: mon- 36, 77
itor turns off automatically between shots
No indicators appear
Hide info is selected for Photo info. Select Show info.
in monitor
• Monitor has dimmed to save power: monitor brightens
Monitor is hard to
when controls are used.
read
• Adjust monitor brightness.
• Monitor is dirty: clean monitor.
86
14
86
92
Technical Notes
Electronically Controlled Cameras
In extremely rare instances, unusual characters may appear in the monitor and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external
static charge. Turn the camera off, remove and replace the batteries, and then turn the
camera on again. In the event of continued malfunction, contact your retailer or Nikon
representative. Note that disconnecting the power source as described above may result
in the loss of any data not recorded to internal memory or the memory card at the time
the problem occurred. Data already recorded will not be affected.
96
97
Technical Notes
Problem
Solution
Camera clock is not Check camera clock regularly against more accurate time84
correct
pieces and reset as required.
Clock battery exhausted: recharge clock battery. Pictures
Camera settings reset recorded before clock has been set will have time stamp of 84
“00.00.0000 00:00”; movies will be dated “01.01.2006 00:00.”
No picture taken • Camera is in playback mode: press
button.
43
when shutter-release • Menus are displayed: press
button.
17
button is pressed • Battery is exhausted.
14
• Subject is low in contrast, dominated by repeating geomet- 79
ric patterns, covers too small an area of the frame, or contains many fine details, objects of sharply differing brightCamera can not focus
ness, or objects at different distances from the camera. Use
using autofocus
focus lock to focus on another subject at same distance.
• Off is selected for AF assist option in camera setup menu.
88
• Focus error. Turn camera off and then on again.
14
• Use flash.
20
Pictures are blurred • Use BSS.
78
• Use tripod and self-timer.
3, 22
20
• Flash is off.
18
• Flash window is blocked.
20
Pictures are too dark • Subject is outside range of flash.
25, 31,
(underexposed)
• Exposure compensation is too low.
76
20, 28
• Subject is backlit: select (scene mode) or use fill flash.
Pictures are too bright
25, 31,
Exposure compensation is too high.
(overexposed)
76
Shutter speed too slow. Noise can be reduced by:
Randomly-spaced
• Using flash
20
bright pixels (“noise”)
• Setting ISO sensitivity to 50
78
appear in image
• Choosing scene mode option with noise reduction
28, 34
Pictures are smeared Lens is dirty. Clean lens.
92
Colors are unnatural White balance does not match light source.
75
Flash is off. Note that flash turns off automatically in mode
20, 26,
(Time lapse movie excepted) and some scene modes or
Flash does not fire
35, 76,
when option other than Single or Intvl timer shooting is
78
selected for Continuous or BSS is on.
• Off is selected for AF assist option in camera setup menu.
88
AF-assist illuminator
• AF assist illumination turns off automatically in some 26–34
does not light
modes.
Bright specks in picFlash is reflecting from particles in air. Turn flash off.
20
tures taken with flash
Problem
Blur warning is not
displayed
No sound when
shutter is released
Optical zoom cannot
be used
Digital zoom cannot
be used
Unexpected results
when flash set to
(auto with red-eye
reduction).
Image mode not
available
Solution
• Off is selected for Blur warning in camera setup menu.
• Blur warning is not displayed in self-timer, , , , , or
mode or when option other than Single is selected for
Continuous or BSS is on.
Sound is not played when Off selected for Sound settings >
Shutter sound, BSS on, option other than Single selected
for Continuous, or or mode is selected.
Optical zoom cannot be used while shooting movies.
35
Digital zoom is not available when Multi shot 16 is selected
76
for Continuous.
In-camera red-eye fix may, in very rare cases, be applied to
areas not affected by red-eye. Set flash to
(auto) or
20, 24,
(fill-flash) and try again. Note that red-eye reduction is the 33, 34
default setting for one-touch portrait, , and modes.
Image mode cannot be adjusted when Multi shot 16 is
selected for Continuous or “Sports composite” is selected in 34, 76
scene mode.
Technical Notes
Date imprint not
Camera clock has not been set.
available
Date not appearing Date does not appear on movies or pictures taken using ,
on pictures
, (Sports composite excepted), Continuous, or BSS.
• Time lapse or interval timer photography in progress: picPictures cannot be
tures can not be played back until recording is complete.
played back
• File has been overwritten or renamed by computer or other make of camera.
Cannot zoom in on Playback zoom cannot be used with movies, small pictures,
picture
or pictures that have been cropped to below 320 × 240.
Cannot record voice
Voice memos cannot be appended to movies.
memo
Cannot use crop, These options cannot be used with movies and may not be
D-lighting, or small available with pictures created with other cameras. Select
picture options
picture that supports crop, D-lighting, or small picture.
Camera may be unable to create Pictmotion movies using
Cannot create new pictures recorded with other cameras. Other cameras may
Pictmotion movie be unable to play Pictmotion movies created with COOLPIX
S6.
Custom Pictmotion Memory card contains no background tracks. If background
backround music tracks were deleted when memory card was formatted, copy
tracks are not listed. tracks to card again.
Cannot mark pictures No more than 999 pictures can be marked for transfer. Use
for transfer
PictureProject Transfer button to transfer pictures.
98
88
22, 26,
35, 76,
78
34, 35,
76, 78,
88
84
26, 35,
76, 78
36, 77
—
38, 44,
82
38
103
50
52
55
Problem
Solution
Transfer marking does Pictures were marked for transfer using another model of
81
not appear
camera. Mark pictures for transfer using S6.
• Camera is off.
14
• Battery is exhausted.
14
PictureProject does • USB cable is not correctly connected.
55
not start when cam- • Appropriate USB option is not selected.
56
era is connected • Computer can not detect camera.
—
See the PictureProject reference manual (on CD) for further
information.
button can not be used to transfer pictures from interCannot transfer
nal memory when Mass Storage is selected for USB or if
55, 56
pictures
memory card is locked. Transfer pictures using PictureProject
transfer button.
• Macintosh version of PictureProject does not support —
Pictmotion transfer.
Cannot transfer
•
button can not be used to transfer Pictmotion movies. —
Pictmotion movies
Use PictureProject transfer button.
• Easy Trans. (no PM) is selected in wireless transfer menu 71
(Windows only).
Profile list is not displayed in wireless Set Interface > USB option in camera setup menu to PTP. 64–70
mode
70
• Check that correct profile is selected.
• Move camera closer to receiver.
—
Wireless signal is poor
• Remove any obstacles between camera and wireless LAN —
adapter or access point.
Wireless transfer
If battery is exhausted, recharge battery or use AC adapter. 9, 11,
interrupted
Restart transfer after turning camera off and then on again.
14
Pictures not displayed • Choose correct video mode.
54
on television
• USB cable is connected: disconnect USB cable
8
Format card >
Format option not Batteries are low.
14
available
Technical Notes
99
Appendix
Supported Standards
• DCF: Design Rule for Camera File System (DCF) is standard widely used in the digital camera
industry to ensure compatibility among different makes of camera.
• DPOF: Digital Print Order Format (DPOF) is an industry-wide standard that allows pictures to
be printed from print orders stored on the memory card.
• Exif version 2.2: This camera supports Exif (Exchangeable Image File Format for Digital Still
Cameras) version 2.2, a standard that allows information stored with photographs to be
used for optimal color reproduction when images are output on Exif-compliant printers.
• PictBridge: A standard developed by in cooperation with the digital camera and printer industries, allowing photographs to be output directly to a printer without connecting the
camera to a computer.
• ImageLink: The ImageLink standard allows pictures taken with a digital camera to be printed
directly on a household printer, without using a computer. The camera can be connected
directly to any ImageLink-compatible printer for one-touch picture printing.
Time Zones ( 84–85)
The camera supports the time zones listed below. Increments of less than one hour are not
supported; when travelling to or from destinations at half- or quarter-hour increments from
Greenwich Mean Time (GMT), such as Afghanistan, Central Australia, India, Iran, Nepal, or Newfoundland, set the camera clock to local time ( 84–85).
GMT +/–
Location
–11
Midway, Samoa
–10
Hawaii, Tahiti
–9
Alaska, Anchorage
–8
PST (PDT): Los Angeles, Seattle, Vancouver
–7
MST (MDT): Denver, Phoenix, La Paz
–6
CST (CDT): Chicago, Houston, Mexico City
–5
EST (EDT): New York, Toronto, Lima
–4
Caracas, Manaus
–3
Buenos Aires, São Paulo
–2
Fernando de Noronha
–1
Azores
±0
London, Casablanca
Technical Notes
100
GMT +/–
+1
+2
+3
+4
+5
+6
+7
+8
+9
+10
+11
+12
Location
Madrid, Paris, Berlin
Athens, Helsinki
Moscow, Nairobi
Abu Dhabi, Dubai
Islamabad, Karachi
Colombo, Dhaka
Bangkok, Jakarta
Beijing, Hong Kong (HK), Singapore
Tokyo, Seoul
Sydney, Guam
New Caledonia
Auckland, Fiji
Defaults ( 74, 80, 83, 89)
Choosing Reset for Reset all restores the following default settings:
Option
Shooting mode ( 18–25)
Flash mode
Self timer
Macro close-up
One-touch portrait
Exposure compensation
Portrait effect
Default
Auto
Off
Off
0
Normal
Scene mode ( 26–34)
Party/Indoor
mode framing assist
PORTRAIT
mode framing assist
LANDSCAPE
mode framing assist
SPORTS
mode framing assist
NIGHT PORTRAIT
Exposure compensation
0
Movie menu ( 36–37)
Movie options
Small size 320
Set interval time
30 s
Auto-focus mode
Electronic VR
Pictmotion settings (
Music
Style
Playback order
Fit to length
Auto select
Single AF
Off
52)
Pachelbel Kanon
Motion
Random
Repeat photos
10 pictures
Option
Default
Shooting menu (continued)
Continuous
Single
Interval timer
30 s
BSS
Exposure BSS
Off
Highlight BSS
Sensitivity
Color options
AF area mode
Playback menu (
Slide show
Frame intvl
Auto
Standard color
Center
80–82)
Setup menu ( 83–89)
Menus
Quick startup
Welcome screen
Monitor settings
Photo info
Brightness
3s
Text
On
Animation
Show info
4
On
1
Normal
Shoot & Transfer (wireless mode; 73)
Confirm Transfer
Off
Save Images
Off
Blur warning
Auto off
Auto transfer
On
1 min.
On
Shooting menu (
Image mode
White balance
Exp. +/–
Miscellaneous
Sound quality ( 40)
Paper size ( 59, 60)
High
Default
74–79)
Normal (2816)
Auto
0
Off
Auto
Choosing Reset also clears the current file number ( 103) from memory. Numbering will continue from the lowest number available (to reset file numbering to 0001, delete all pictures before
selecting Reset). All other settings are unaffected, including Date ( 84), Date counter ( 87),
Language ( 89), USB ( 89), and Video mode ( 89).
101
Technical Notes
Date imprint
AF assist
Sound settings
Button sound
Shutter sound
Volume
Image Mode ( 74), Movie Options ( 36), and Sound Quality ( 40)
The following table lists the number of pictures, maximum length per movie, or maximum total voice recording length that can be recorded to internal memory or a 256 MB memory card,
together with the size of still pictures printed at 300 dpi.
Image mode
Movie options
Sound
quality
Setting
Internal memory (20 MB) 256 MB memory card
High (2816★)
6
85
Normal (2816)
13
165
Normal (2048)
25
305
PC screen (1024)
85
1045
TV screen (640)
182
2245
TV movie 640★
18 s
3 min. 40 s
Small size 320★
35 s
7 min. 20 s
Small size 320
1 min. 10 s
14 min. 30 s
Pictmotion 320
1 min.
1 min.
Smaller size 160
3 min. 53 s
48 min. 5 s
Time lapse movie★
212 frames
1800 frames
Normal
43 min. 35 s
5 hr.
High
15 min. 47 s
3 hr. 15 min. 55 s
Print size (cm / in.)
24 × 18 / 9½ × 7
24 × 18 / 9½ × 7
17 × 13 / 7 × 5
9 × 7 / 3½ × 2½
5 × 4 / 2 × 1½
—
—
—
—
—
—
—
—
* All figures are approximate. Actual capacity varies with make of memory card and, in the
case of JPEG images, with the type of scene recorded. If memory remains for more than
9999 pictures, exposure count display will show 9999.
Restrictions on Camera Settings ( 74)
Restrictions apply to the following settings in
mode:
Technical Notes
Flash mode Flash turns off at Continuous settings of Continuous or Multi-shot 16 or
when BSS is on. Original mode is restored when Single or Intvl timer shooting is selected or BSS is turned off.
Self timer If self-timer is on, only one shot will be taken when shutter is released, regardless
of settings chosen for Continuous and BSS. Original Continuous and BSS settings are restored when picture is taken or self-timer is turned off.
Continuous Selecting Continuous or Multi-shot 16 turns BSS off. Original BSS setting is
not restored when Single is selected.
BSS Continuous is set to Single when BSS is on. Original setting is not restored
when BSS is turned off.
White White balance is set to Auto and can not be adjusted when Black and white,
balance Sepia, or Cyanotype is selected for Color options. Original white balance is
restored when Standard color or Vivid color is selected.
102
Image File and Folder Names
Pictures, movies, and voice memos are assigned file names with three parts: a four letter identifier, a four-digit file number assigned automatically by the camera in ascending order, and a
three-letter extension (e.g., “DSCN0001.JPG”).
Originals
Identifier
Extension
Copies
Still picture
DSCN
.JPG
Cropped copy
Small copy
Movie
DSCN
.MOV
Time-lapse movie
INTN
.MOV
D-lighting copy
Voice recording
DSCN
.WAV
Voice memo
Same as picture .WAV
Identifier
RSCN
SSCN
FSCN
Extension
.JPG
.JPG
.JPG
Pictures and sound files are stored in folders named with a three-digit folder number followed
by a five-character identifier: “P_” plus a three-digit sequence number for pictures taken using panorama assist (e.g, “101P_001”;
29–30), “INTVL” for interval timer photography (e.g.,
“101INTVL”;
77), “SOUND” or “SOUNE” for voice recordings (e.g., “101SOUND”;
39), and
“NIKON” for all other pictures (e.g, “100NIKON”). Folders can hold up to 200 pictures; if a picture
is taken when the current folder contains 200 pictures, a new folder will be created by adding
one to the current folder number. If a picture is taken when the current folder is numbered
999 and contains 200 pictures or a picture numbered 9999, no further pictures can be taken
until the medium is formatted ( 89) or a new memory card inserted.
Files copied using Copy > Selected images or COPY SOUND FILES > Selected files are copied to the current folder, where they are assigned new file numbers in ascending order starting from the largest file number in memory. Copy > All images and COPY SOUND FILES >
Copy all files copy all folders from the source device; file names do not change but new
folder numbers are assigned in ascending order starting from the largest folder number on
the destination device ( 42, 82).
Pictmotion movies ( 53) are stored under the “NKSS” folder in folders named with a threedigit folder number followed by “PRJCT” (e.g., “101PRJCT”). Each folder contains the picture
and sound files for a single Pictmotion movie.
Pictures taken with Off selected for Shoot & Transfer > Save Images are stored on the computer using file names beginning with “STCN” followed by four-digit file numbers assigned
automatically in ascending order (e.g., “STCN0001.JPG”).
103
Technical Notes
Copies ( 44, 45, 82)
Copies created using crop ( 44), D-Lighting ( 45), and small picture ( 82) have the same
transfer marking as the original but are not marked for printing or protection. Copies created
using Copy ( 82) have the same protection marking as the original but are not marked for
printing or transfer. The crop and small picture options can not be used with copies created
with crop or small picture; D-Lighting is not available with copies created with crop, D-Lighting, or small picture.
Specifications
Nikon COOLPIX S6 Digital Camera
Type
Compact digital camera
Effective pixels
6.0 million
CCD
Image size (pixels)
1 2.5
Lens
Focal length
f/-number
Construction
3 × Zoom-Nikkor ED Lens
5.8–17.4 mm (35 mm [135] picture angle equivalent: approx. 35–105 mm)
f/3.0 – f/5.4
12 elements in 10 groups
Digital zoom
Up to 4 × (35 mm [135] picture angle equivalent: 420 mm)
-in. CCD; total pixels: 6.18 million
• 2,816 × 2,112 (2816★, 2816)
• 1,024 × 768 (1024)
• 2,048 × 1,536 (2048)
• 640 × 480 (640)
Autofocus (AF)
Contrast-detect AF with AF-assist illumination
Focus range (from lens) 30 cm (1 ft.) – ∞
Macro mode: 4 cm (1.6 in.)– ∞ (middle zoom position)
Focus-area selection
Center; manual with 99 focus areas
AF-assist illumination Class 1 LED product (IEC 60825-1 Edition 1.2-2001); max. output: 1,500 µW
Monitor
Approximate frame
coverage
Storage
Media
File system
File formats
Exposure
Metering
Exposure control
3.0 in., 230,000-dot, wide viewing-angle low-temperature polysilicon
TFT LCD with 5-level brightness adjustment
Shooting mode: 97% horizontal and 97% vertical
Playback: 100% horizontal and 100% vertical
Internal memory (approx. 20 MB); SD (Secure Digital) memory cards
DCF, Exif 2.2, and DPOF compliant
Compressed: JPEG-baseline-compliant
Movies: QuickTime
Sound files: WAV
Technical Notes
Range
256-segment matrix, center-weighted, spot, spot AF area
Programmed auto exposure with exposure compensation
(–2.0 – +2.0 EV in steps of 1 3 EV)
W: 1.2 – 16.1 EV
T: 2.9 – 17.8 EV
Shutter
Speed
Mechanical and charge-coupled electronic shutter
2 – 1 500 s
Aperture
Range
Electronically-controlled ND filter selection
f/3.0 and f/8.5 (W)
ISO sensitivity
50, 100, 200, 400 (ISO equivalent); Auto (auto gain to ISO 200 equivalent)
Self-timer
Can be selected from approximately 10 and 3 seconds duration
104
Built-in flash
Range (approx.)
Sync method
W: 0.3–2.6 m/1 ft.– 8 ft. 6 in.
Sensor flash system
I/O terminals
Multi connector (supports ImageLink)
Interface
USB
Video output
Can be selected from NTSC and PAL
Wireless
Standards
Communications
protocols
Range (line of sight)
Operating frequency
Data rates*
Security
Access protocols
T: 0.3 – 1.4 m/1 ft – 4 ft. 7 in.
IEEE 802.11b/g (standard wireless LAN protocol), ARIB STD-T66 (standard for low power data communications systems)
IEEE 802.11g: OFDM
IEEE 802.11b: DBPSK, DQPSK, CCK
Approximately 20 m/67 ft. (varies with location)
2412–2462 MHz (11 channels)
IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
IEEE 802.11b: 1, 2, 5.5, and 11 Mbps
TKIP, 128/64-bit (104/40-bit) WEP
Infrastructure / ad-hoc
Supported
languages
Chinese (Simplified and Traditional), Czech, Danish, Dutch, English,
Finnish, French, German, Indonesian, Italian, Japanese, Korean, Polish,
Portuguese, Norwegian, Russian, Spanish, Swedish, Thai
Power sources
• One rechargeable Nikon EN-EL8 lithium-ion battery (supplied)
• EH-64 AC adapter (supplied)
Battery life
Approximately 200 shots (EN-EL8)†
Approximate dimensions 100.5 × 60 × 21 mm/4.0 × 2.4 × 0.8 in. (W × H × D)
Approximate weight
140 g (4.9 oz.) without battery or memory card
Operating environment
Temperature
0 – 40 °C (32 – 104 °F)
Humidity
Less than 85% (no condensation)
* Maximum logical data rates according to IEEE standard. Actual rates may differ.
† Based on Camera and Imaging Products Association (CIPA) standard for measuring life of camera batteries. Measured
at 25 °C (77 °F); zoom adjusted with each shot, flash fired with every other shot, image mode set to NORMAL.
Specifications
Nikon will not be held liable for any errors this manual may contain. The appearance of this
product and its specifications are subject to change without notice.
105
Technical Notes
Unless otherwise stated, all figures are for a camera with fully-charged EN-EL8 battery operated at an ambient
temperature of 25 °C (77 °F).
MV-15 COOL-STATION
Supported cameras
Nikon S6 digital cameras
I/O terminals
DC in, USB, audio-video out, camera connector
Interface
USB
Operating temperature
0 – 40 °C (32 – 104 °F)
Approximate dimensions 111.5 × 28 × 50.5 mm/4.4 × 1.1 × 2.0 in. (W × H × D, excluding projections)
Approximate weight
52 g (1.8 oz)
PV-11 Dock Insert
Approximate dimensions 135.5 × 22.5 × 63 mm/5.3 × 0.9 × 2.5 in. (W × H × D, excluding projections)
Approximate weight
32 g (1.1 oz)
EH-64 AC Adapter
Rated input
100–240 V AC, 50/60 Hz, 0.18–0.1 A
Rated capacity
18–22 VA
Rated output
DC 4.8 V / 1.5 A
Operating temperature
0 – 40 °C (32 – 104 °F)
Approximate dimensions 41 × 23.5 × 79 mm / 1.6 × 0.9 × 3.1 in. (W × H × D, excluding projections)
Length of cord
Approximately 1.7 m (5 ft. 7 in.)
Approximate weight
110 g (3.9 oz), excluding power cable
EN-EL8 Rechargeable Li-ion Battery
Type
Rechargeable lithium-ion battery
Rated capacity
3.7 V / 730 mAh
Operating temperature
0 – 40 °C (32 – 104 °F)
Approximate dimensions 35 × 47 × 5 mm/1.4 × 1.9 × 0.2 in. (W × H × D, excluding projections)
Approximate weight
Technical Notes
106
17 g (0.6 oz), excluding terminal cover
Index
Clock, see Date
Close-ups, 23, 28
Color options, 79
Computer, 54. See also Wireless.
Continuous, 76
Copies, 44, 45, 82. See also Copy
(playback menu); Cropping
pictures; D-lighting; Small pic.
Copy (playback menu), 82
Cropping pictures, 44
Cyanotype, 79
D
Date, 84
Date and time, see Date
printing, 57, 61, 87
Date counter, see Date imprint
Date imprint, 87
Daylight saving time, see Date
DCF, see Design rule for Camera
File system
Default settings, 101
restoring, see Reset all
Delete, 81
Deleting pictures, 19, 43, 81
in full-frame playback, 19, 43
selected pictures, 81
Design rule for Camera File
system, 100
Digital Print Order Format, 60–61,
100
Direct Print, see PictBridge
D-lighting, 45
Dock insert, 62
DPOF, see Digital Print Order
Format
E
Electronic VR, 37
E-mail, 74, 82
Error messages, 93–95
Exif 2.2, 100
Exif Print, see Exif 2.2
Exp. +/–, 25, 31, 76
Exposure compensation, 25,
31, 76
scene mode, 31
shooting mode, 76
Extension, 103
F
File names, 103
Fill flash, 20
Firmware, 89
Firmware version, 89
Flash, 20
mode, 20
Focus, 16, 79
area, 16, 79
face-priority, 24
indicator, 16
lock, 79
mode, 37 ,79
Format, see Format card
Format card, 89
Format memory, 89
Formatting, 12, 89
internal memory, see Format
memory
memory cards, see Format card
Framing, 16, 18, 24, 32
guides, 32
Full-time AF, see Focus, mode
H
Help, 17
I
ImageLink, 62, 100
Image mode, 74
Image size, see Image mode
Indicator lamp, 11, 16, 36, 39, 77
Indoor photography, 20, 21, 26
Interface, 54, 55, 58, 62, 65, 89
Internal memory, 12, 14
J
JPEG, 103
JPG, 103
L
Landscapes, 28, 33
Language, 89
Language, choosing, 89
Lens, 2, 92
List by date, 48
M
Macro close-up, 23, 28
Memory cards, 12–13, 89, 90, 102
approved, 90
capacity of, 102
formatting, 12, 89
inserting and removing, 12–13
Memory card slot, 3, 12–13
Menus, 5, 17, 74
Menus, 83
107
Index
Symbols
(auto) mode, 18
(calendar) mode, 47
(delete) button, 19, 43
(D-lighting) button, 2, 45
(list-by-date) mode, 48
(MENU) button, 3, 17
(mode) button, 3, 5, 17
(movie) mode, 35
(One-touch portrait) button,
2, 24
(Pictmotion) mode, 50
(playback) mode, 43
, , , , see scene assist
modes
(shooting/playback) button,
3, 19, 43
(voice recording) mode, 39
(voice recording) playback
mode, 41
(wireless) mode, 63–73
(wait) icon, 16, 93
A
Accessories, 90
AEL, 29
AF●, see Focus, indicator
Autofocus, see Focus
AF-area mode, 79
AF Assist, 88
Auto-focus mode, 37
Auto off, 88
Auto transfer, see Interface
A/V cable, 8, 54
B
Backlit subjects, 20, 28
Batteries, 10–11
Battery level indicator, 6–7, 14
Best Shot Selector, 78
Black-and-white, 79
Blur, 21, 88
Blur warning, 88
Brightness, see Monitor settings
BSS, see Best Shot Selector
Burst shooting, see Continuous;
Scene assist, Sports ( )
Button sound, see Sound
settings
C
Calendar playback, 47
Index
Monitor, 3, 6–7, 91, 92
brightness, 86
indicators in, 6–7
Monitor settings, 86
MOV, 103
Movies, 35–38
recording, 35–37
viewing, 38
MOVIE menu, 36–37
Moving subjects, 34, 76
Multi selector, 4, 17
N
Night photography, 20, 26
Noise reduction, 21, 27–28, 34
NTSC, see Video mode
Number of exposures remaining,
14, 102
O
On/off, see Power switch
One-touch portrait, 24–25
button, 2
menu, 25
P
PAL, see Video mode
Panorama, 29–30
Photo info, see Monitor settings
PictBridge, 57–61, 100
Pictmotion, 50–53
PictureProject, 52, 54–56
PLAYBACK MENU, 80–82
Playback, 19, 43
calendar, 47, 49
full-frame, 19, 43
list by date, 48–49
menu, 80–82
movies, 38
on TV, 54
Pictmotion, 53
thumbnail, 43
voice memo, 46
zoom, 44
Portraits, 24–25, 26
Power-on lamp, 2, 14
Power switch, 2 ,14
Printing pictures, 57–62. See
also Date and time, printing;
Date imprint; Digital Print Order
Format; PictBridge; Print set
Print set, 61
Print size, 59–60
Protect, 81
108
Protected pictures, 6–7, 81
Q
Quick format, see Format card
Quick startup, 83
QuickTime, 104
R
Red-eye reduction, see Flash,
mode
Reset all, 89, 101
S
(scene) mode, 26–31
Back light ( ), 28
Beach/Snow ( ), 27
Close-up ( ), 28
Copy ( ), 28
Dusk/Dawn ( ), 28
Fireworks show ( ), 28
Museum ( ), 28
Night landscape ( ), 28
Panorama assist ( ), 29–30
Party/Indoor ( ), 27
Sunset ( ), 27
Scene assist modes, 32–34
Landscape ( ), 33
Night portrait ( ), 34
Portrait ( ), 33
Sports ( ), 34
Secure Digital (SD), see Memory
cards
Self-timer, 22
Self-timer lamp, 2, 22
Sepia, 79
SET-UP MENU, 83–89
SHOOTING MENU, 74–79
Shutter-release button, 2, 16
Shutter sound, see Sound
settings
Single AF, see Focus, mode
Size, see Image mode
Sleep mode, see Auto off
Slide show, 81
Slow sync, see Flash, mode
Small pic., 82
Smear, 91
Sound, 38, 40, 46 ,51, 75
Sound settings, 88
Standby mode, see Auto off
Strap, camera, 2–3
Support information, 1
T
Telephoto, see Zoom
Television, 36, 54, 74, 89
connecting to, 54
Thumbnail playback, 43
Time, see Date
Time zone, 84–85, 100
Timer, see Self-timer
Transfer, 54–56
mark, 55
marking pictures for, 55, 81, 89
wireless, 63–73
Transfer marking, 81
Tripod, 3, 22, 27–28, 34
T button, see Zoom control
U
USB, 56, 89. See also Interface
USB, 54–56, 58, 62, 65
cable, 8, 54–56 ,58
connection, 54–56, 58
connector, 8, 54–56, 58
V
VCR, 54
Video mode, 54, 89. See
also Interface
Vivid color, 79
Voice memo, 46
Voice recording, 39–42
Volume, 38, 41, 46, 53, 88
Volume, see Sound settings
W
WAV, 103
Welcome screen, 84
White balance, 75
White balance, 75
preset, 75
Wide angle, see Zoom
Wireless, 63–73
Wireless LED, 2, 72
W button, see Zoom control
Z
Zoom, 15
digital, 15
indicator, 6–7, 15
optical, 15
playback, 44
Zoom control, 2
.O REPRODUCTION IN ANY FORM OF THIS MANUAL IN
WHOLEORINPARTEXCEPTFORBRIEFQUOTATIONINCRITICAL
ARTICLES OR REVIEWS MAY BE MADE WITHOUT WRITTEN
AUTHORIZATIONFROM.)+/.#/20/2!4)/.
3""
-!

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement