WHAT OTHER WOOFERS HAVE NIGHTMARES ABOUT
56cm (22")
58,5cm (23")
145Kg
6000Wrms
12000Wmax
T9922-44
T9922-22
56cm (22”) JackHammer SQL SuperWoofer, Dual 4Ω (6000 W RMS)
56cm (22”) JackHammer SPL SuperWoofer, Dual 2Ω (6000 W RMS)
JackHammer is the most enormous, mind-blowing, beast-of-a-subwoofer ever created. You will literally not believe it until you see it. Standing in at 59cm (23”) tall,
145Kg (320 pounds), and with 12000 watt peak music power handling, you will be hard-pressed to find something that will get in the ring with this heavyweight.
• Carbon fiber & glass fiber dust cap with aluminum honeycomb center
• Expanded polypropylene cone with mica filler for reduced mass and increased stiffness
• FEA designed progressive roll spider with 6mm2 (10 AWG) integrated tinsel leads woven in to allow for 6,4cm (2.5”) of linear cone movement one way
• 25Kg (900 ounce) strontium ferrite magnet with extended magnetic field gap technology and aluminum shorting ring
• 16,5cm (6.5”) voice coil with a flat wound, long-excursion design incorporating 6,4cm (2.5”) of X-max and 1mm2 (17 AWG) high temperature aluminum wire
• Aluminum heatsink to maintain the optimum voice-coil temperature
• 6000 RMS, 12000 peak music power
The JackHammer SuperWoofer represents excess in every way and this enormous subwoofer lives for high SPL and window shattering bass. But, the T9922 is designed
for sonic quality, and high SPL, what we call SQL. JackHammers are shipped in either the SPL mode, with dual 2 Ω voice coils, or as the SQL model with dual 4 Ω voice coils.
A replaceable cone assembly is also available, for switching between “every day” listening (SQL), and competition (SPL). Unlike traditional replacement assemblies,
the MTX Audio Thunder9922 replacement assembly can be accomplished without removing the speaker from the enclosure. Fast, quick, and easy.
AMPS
Are you ready for the future in car audio? After years of continuous evolution,
the MTX amplifier range has been completely transformed. The amount and
level of new technologies, of ingenuity, of power and design is is lightyears
ahead. Even the engineers from NASA are speechless!
No other brand in the industry has the freedom to do something as radical
as this. The first eye grabber is the new design of the amplifiers. A technical
quest: the amp is now wrapped in a heat sink made entirely out of aluminium.
Cooling System “XTC”
How long do you think it takes for the average
car hifi amp to warm up and reach its peak
in musicality? Some take up to 30 minutes
and that’s too long. With the new cooling
system “XTC” from Xtant Technology Cooling
the aluminium heat sink inside the new MTX
2005 amplifiers is reduced in size to allow for
a quicker rise in temperature. Then, silent
fans regulate the temperature accordingly to
within a couple of degrees. The air intake is
located at the top of the amp. Fresh air is then
propelled through thin, sandwiched layers of
aluminium upon which all the MOS-FETS are
fastened thus optimizing the thermal effect.
It is amazingly efficient and easy to control.
The transformers as well as the class-D output filter are located at the other end of the
sandwiched layers meaning they too are exposed to this air-cooling. The new amps are
designed both for cold climate areas where
you want the heat sink and the transistors
to heat up quickly and for warmer climates
where keeping them from overheating are the
prime concern.
4 to 1 - 1st time in the
world
They never stop. We’re
talking about the engineers at MTX. For the
first time, a 4-channel
amplifier can transform
itself into a Mono Block.
Yes, you read it correctly, a real Mono Block. It
can also first become a 3
and 2 channel amplifier.
But a 4-channel amp
that can convert itself
into a Mono Block has
never been done before.
Thank you, gentlemen
in the R&D department.
This marvellous ingenuity will allow the user
to modify his system
design as often as he
chooses,
regardless
how demanding the
configuration.
Simply
amazing
All of the connections are newly located on one side of the amp for wiring
ease, while all adjustments are made from the top of the amp, making tweaking
and tuning easier than before (especially considering the number of new features on the amps). If you take a look at the chart you’ll notice the impressive
number of adjustments: 12-18-24dB/oct. active crossovers, adjustable subsonic filter, parametric or quasi-parametric equalizer, separate gain adjustments,
colour control...it’s a busy place. A massive amount of new technology and
New Technology “Prizm EFX”
All the new MTX amps are equipped with it. With
one turn of a screw, this new technology allows
the user
to adjust the colour illumination of the control panel
on the amplifier. Virtually all colours are available
thus allowing you to match the rest of the colour
schemes in the installation or the car. If you have
difficulty choosing one colour, position the Prizm
EFX on stroboscopic. All the colours in the rainbow
are displayed to the beat of the music. Too cool. If
you still can’t decide then simply put it on red: the
colour of MTX.
50% more MOS-FETs
for the same power
rating
The new MTX amps
offer 50% more MOSFETs at the power
supply and VFETs at the
output stage compared to the
previous line-up (though few
fans of MTX amps ever complained about this being an issue to
achieve huge power outputs).
Remote Subwoofer
control: EBC
It’s now included
with every amp
except the smallest
one, the TA3202.
The EBC allows you to adjust the sub level from the
driver’s seat. Very handy
as every music recording
seems to have a different
sub bass level.
innovation has been incorporated into the new range. And everything is under
control. The new ventilation system is thermal regulated and allows for great
installation flexibility. No matter what position, the amp will always be kept
cool. EBC bass remote control now comes stock. The evolution in the powerrating department will still all power hunger with the biggest amp capable of
delivering 3.000W “CEA” RMS... there are going to be some very hot voice coils
around this year. And for the artistically inclined, there is the PRIZM EFX. The
TA92001
TA81001
TA7801
TA5601
TA4501
TA3401
TA2301
TA91002
TA8502
TA7402
TA5302
TA4252
TA3202
TA7804
TA3404
Channel
Class
1D
1D
1D
1D
1D
1D
1D
2 AB
2 AB
2 AB
2 AB
2 AB
2 AB
4 AB
4 AB
Power
1Ω CEA
1x3000W
1x1500W
1x1200W
2x750W
2x375W
2x300W
4x200W
4x100W
Power
2Ω CEA
1x2000W
1x1000W
1x800W
1x600W
1x500W
1x400W
1x300W
2x500W
2x250W
2x200W
2x75W
2x63W
2x50W
4x200W
4x100W
Power
4Ω CEA
1x1000W
1x500W
1x400W
1x300W
1x250W
1x200W
1x150W
2x250W
2x125W
2x100W
2x150W
2x125W
2x100W
4x100W
4x50W
Power
specifications find newly
guaranteed norms
You’re finally going
to be able to make
heads and tails out
of the often-exaggerated specs from
other brands in the
industry. MTX has
been at the forefront
of leading the industry towards an agreed upon
set of guidelines to measure actual power outputs
of car hifi amplifiers. An independent laboratory
selected by the CEA (Consumer Electronics Association) will be responsible for conducting the strict
allocation of norms to those brands that choose to
have their amplifier specifications measured and
made public in this manner. All measuring will
follow a rigorous set of parameters agreed upon
by the CEA board and this logo will attest to this.
We at MTX had been waiting along time for this to
happen. Who should we thank?
Bridged
Power CEA
1x1500W
1x750W
1x600W
1x300W
1x250W
1x200W
2x400W
2x200W
MTX engineers are helping us to reach the rainbow at the touch of a button.
The two 4 channel amps will offer a world premier, breaking all the rules in
amplifier functionality and use. On the matter of sound quality, these are the
best amps MTX has ever come out with.
Low-pass
x-over
24dB/oct
24dB/oct
24dB/oct
24dB/oct
24dB/oct
24dB/oct
24dB/oct
24dB/oct
24dB/oct
24dB/oct
24dB/oct
24dB/oct
24dB/oct
24dB/oct
24dB/oct
High-pass
x-over
24dB/oct
24dB/oct
12dB/oct
12dB/oct
12dB/oct
12dB/oct
12dB/oct
12dB/oct
Subsonic
filter
20 to 50Hz
20 to 50Hz
30Hz
30Hz
30Hz
30Hz
X-over
Frequency
40-200Hz
40-200Hz
40-200Hz
40-200Hz
40-200Hz
40-200Hz
80 or 120Hz
40-350Hz
40-350Hz
40-350Hz
40-350Hz
85Hz
85Hz
40-350Hz
40-350Hz
EBC
EQ
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Prizm High
EFX Level
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
TA92001: 3000W CEA
3000W is the CEA approved output power achievable by the most powerful ClassD Mono Block from
the new range of amplifiers at MTX. It’s actually the
most powerful amplifier MTX has ever designed in
the company’s history. And these are CEA measured Watts. To give you an idea of what this represents: an amp like the TA1501D or theTA81000 put
out 1200W CEA. For us mere mortals, these amps were able to reach between 1500 and 2000W RMS.
Pretty tough standards the CEA came up with... Two features allow you to optimise the bridging of
two TA92001: the fully adjustable phase from 0 to 180 and a bypass for all pre-amplifier functions. As
we said, those engineers never stop.
New Connectors
They’re gorgeous. Introduce the bare wire of the cable directly into the power or speaker connectors, turn the BTR
screw and you’re on. It’s clean, quick, simple and safe.
There’s even a small cover for the top of the BTR screws
once you’re finished tightening them. All the connectors are
on the same side. It’s easier and more stealth looking. The
big amps even have an additional input connection for the
capacitor. Perfect score on the new amp connectors.
SPEAKERS
AXE HIGH-END COMPONENTS
Thunder Axe High End Component systems have a larger X max than all other competitors. Featuring glass fiber woofer cones with aluminum deposition
and a 25mm Teteron® tweeter, Thunder Axe High End Components were designed for superior imaging, detail, sound quality, and dynamic range. The
specifically designed crossover distributes frequencies properly to maximize the musical performance of each driver. Engineered with superior components, the 2-way, bi-ampable, 18dB/octave crossover network is designed for accurate imaging and sound quality. They have been optimized for off-axis
or on-axis listening and include a 5 level tunable tweeter network for optimum imaging regardless of tweeter placement or positioning. In addition, the
woofer has a 0°, 30°, and 60° off-axis compensation. Said Dan Roemer, VP of Acoustical Engineering, “These components are the best speakers MTX
has ever released. These are speakers with the versatility, performance, and reliability that separate the best speakers from those that are just average.
Any true audiophile will appreciate these products.” With the addition of the Thunder Axe High-End Component line, MTX offers high performance,
installation-friendly solutions. Whether you are upgrading from factory speakers or you are an audiophile looking to build the ultimate mobile sound stage,
Thunder Axe High-End Components deliver the ultimate in sound quality. Here are the specs :
• Glass Fiber Cone material with Aluminum Deposition provides unmatched musical accuracy and extended low frequency response
• 25mm Teteron Dome Tweeter provides ultra-wide frequency response to blend perfectly with the mid/woofer
• 2-way Separate Crossover 18dB/oct that is engineered with superior components
• 5 Adjustable Tweeter Levels to provide the best linear response regardless of tweeter positioning and placement
• Large 1.5" voice coil
• Up to 4,8mm (!) Xmax
• 3 Position Woofer off-axis compensation (0°, 30°, 60°) provides exceptional dynamics and detail while bringing the music up front and center, as if the
listener is in the front row of a live performance
ImpedPeak
RMS
Sensi• Bi-amp capability
Size
Response
Cone
Grills
ance
Power
Power
tivity
• Add an additional 6-1/2” driver and crossover
TXC6.1
16,5 cm
4Ω
300W
150W
90dB 40-20kHz Fiberglass
Yes
package (TXC6.0) to create a 3-way solution,
TXC6.0
16,5 cm
4Ω
300W
150W
90dB 40-250Hz Fiberglass
Yes
creating improved detail, imaging and sound dynamics TXC5.1
13 cm
4Ω
250W
125W
90dB 50-20kHz Fiberglass
Yes
• Die-cast aluminum basket
TXC4.1
10 cm
4Ω
200W
100W
90dB 60-20kHz Fiberglass
Yes
• Shallow mount design
TXC.1
25 mm
4Ω
150W
75W
90dB 2,5-20kHz
Tetron
Yes
AXE SEPARATES
DOME-AXIALS
With a reputation for quality and performance in amps and subs and MTX Audio’s new breed of subwoofers
cranking out more bass than ever, the time has come to enhance the world of coaxial speakers. Introducing
Thunder Dome-Axials™—a line that offers crystal clear sound and ease of installation to complement the
legendary MTX bass. All models from the 4" up to the 5x7" feature a 20mm soft dome tweeter - the tweeter
swivels on the larger speakers, for an improved listening experience. The 2-way 6x9" model has a 25mm soft
dome tweeter and the 3-way has a 20mm and a 25mm soft dome tweeter. Totaly new to MTX, is our TDX6802
6x8" speaker. This model doubles as a 5x7" speaker. We designed the speaker so that it could be mounted in
factory locations of both 5x7" speakers and 6x8" speakers using a truly innovative wide mounting flange.
A newly designed graphite style grille sets off the aluminum deposition cone of the speaker giving the Thunder
Dome-Axial speakers a look that demands attention to go along with their high performance standards.
Size
Size
TX6001
TX5001
TX4001
TX1000
16,5 cm
13 cm
10 cm
25 mm
Impedance
4Ω
4Ω
4Ω
4Ω
Peak
Power
180W
180W
150W
180W
RMS
Power
90W
90W
75W
50W
SensiResponse
tivity
90dB 44-20kHz
90dB 51-20kHz
90dB 74-20kHz
90dB 2,5-20kHz
Cone
Grills
Polypro
Polypro
Polypro
Silk
Yes
Yes
Yes
Yes
Speakers
TDX6903
6x9”
TDX6902
6x9”
TDX6802 6x8” 5x7”
TDX6502 16,5 cm
TDX5202 13 cm
TDX4602
4x6”
TDX4002 10 cm
TDX3502 8,7cm
3 way
2 way
2 way
2 way
2 way
2 way
2 way
2 way
SEPARATES
Size
THS652
THS602
THS502
THS19T
16,5 cm
16 cm
13 cm
19 mm
Impedance
4Ω
4Ω
4Ω
4Ω
Peak
Power
260W
260W
220W
260W
RMS
Power
65W
65W
55W
65W
Sensitivity
92,0dB
92,0dB
91,5dB
92,0dB
Response
Cone
60Hz-25kHz Polypro
57Hz-25kHz Polypro
65Hz-25kHz Polypro
2,5-25kHz
Silk
Grills
Yes
Yes
Yes
Yes
We’re always ahead of the race! The new THS and THX, to begin with, make use of an of a metal coated injected
polypropylene cone, a composite usually used in speakers costing up to three times as much. The basket meets
MTX standards meaning it is our own unique design. The rubber wrapped magnetic motor is oversized in order to
maximize power handling. Go ahead! Give it everything you’ve got.
The separates are really the most impressed part of the line with an aluminium phase plug, a 19mm silk dome
tweeter and the whole filtered by an MTX engineered crossover aiming for a timbre conducive with the European
ear. You’ll love the sound of these speakers.
Impedance
4Ω
4Ω
4Ω
4Ω
4Ω
4Ω
4Ω
4Ω
Peak
Power
200W
200W
120W
120W
90W
80W
70W
50W
RMS
Power
100W
100W
60W
60W
45W
40W
35W
25W
Sensitivity
92dB
92dB
92dB
92dB
92dB
92dB
92dB
92dB
Response
Cone
Grills
42Hz-20kHz
42Hz-20kHz
42Hz-20kHz
48Hz-20kHz
55Hz-20kHz
80Hz-20kHz
75Hz-20kHz
83Hz-20kHz
Polypro
Polypro
Polypro
Polypro
Polypro
Polypro
Polypro
Polypro
Yes
Yes
Yes
Yes
Yes
X-AXIALS
THX693
THX653
THX603
THX502
THX402
Size
Speakers
6x9”
16,5 cm
16 cm
13 cm
10 cm
3 way
3 way
3 way
2 way
2 way
Impedance
4Ω
4Ω
4Ω
4Ω
4Ω
Peak
Power
320W
260W
260W
220W
180W
RMS
Power
80W
65W
65W
55W
45W
Sensitivity
93dB
92dB
92dB
91,5dB
90,5dB
Response
Cone
Grills
38Hz-20kHz
60Hz-20kHz
60Hz-20kHz
55Hz-20kHz
75Hz-20kHz
Injec. Poly.
Injec. Poly.
Injec. Poly.
Injec. Poly.
Injec. Poly.
Yes
Yes
Yes
Yes
Yes
SUPERWOOFER
A fine line between genius and insanity!
After the JackHammer, the T9500 series is the most beautiful, the most
powerful (2000W) and the heaviest (28Kg) SuperWoofer at MTX.
The T9500 incorporates 30 years of know how in subwoofer manufacturing,
design and all the experience of a team of 32 engineers.
Avaialble in 38cm, 30cm and 25cm models, all are capable of handling
between 750W and 1000W. How you might ask: an X-max that reaches 26mm
one way which is twice as much as on a standard sub, 3 gigantic, high grade
magnets and a 10cm black anodized aluminium former with a voice coil made
from 220oC aluminium flat wound ribbon wire.. Seeing it is astonishing, hearing it is terrifying!
The basket is based on the world renowned SPL world record setting RFL152.
The StreetWires patented connectors are even more impressive. You’re
able to connect four 10mm2 wires to each terminal.
The SledgeHammer is the best possible enclosure available to
take full advantage of these SuperWoofers. We tested all the
possible configurations and we found the T9500s deserve a
SledgeHammer. If you don’t want our boxes, the SLH* dimensions are available.
The T9500 is the most excessive sub under production. Best
way to describe these: HOLY SHIT!
FEATURES
ALDS Technology
✔
SPV Technology
✔
CET Technology
✔
Butyl Suspension
✔
Polypro/Carbon cone
✔
Cone in 1 piece
✔
Sealed Compatible
✔
Vented Compatible
✔
Stitched Cone/suspension ✔
MTX basket
✔
Aluminium basket
✔
StreetWires connectors
✔
X-max (1 way)
26mm
Power handling
12/10
Size
T9510-04
T9510-44
T9512-04
T9512-44
T9515-04
T9515-44
25 cm
25 cm
30 cm
30 cm
38 cm
38 cm
Impedance
4Ω
2x4Ω
4Ω
2x4Ω
4Ω
2x4Ω
MAX
Power
1500W
1500W
2000W
2000W
2000W
2000W
RMS
Power
750W
750W
1000W
1000W
1000W
1000W
Sensitivity
85,9dB
87,5dB
87,4dB
91,0dB
90,4dB
93,8dB
Xmax
Fs
Magnet
26mm
26mm
26mm
26mm
26mm
26mm
39,4Hz
41,1Hz
34,3Hz
36,4Hz
30,6Hz
31,9Hz
5550 gr
5550 gr
7400 gr
7400 gr
7400 gr
7400 gr
Cooling SuspenResponse
Cone
system
sion
SPV
CET
39-150Hz Polypro/Carbon
SPV
CET
41-150Hz Polypro/Carbon
SPV
CET
34-150Hz Polypro/Carbon
SPV
CET
36-150Hz Polypro/Carbon
SPV
CET
30-150Hz Polypro/Carbon
SPV
CET
31-150Hz Polypro/Carbon
Depth
23,6cm
23,6cm
24,7cm
24,7cm
27,3cm
27,3cm
Size
T9510A
T9510D
T9512A
T9512D
T9515A
T9515D
T9510x2D
T9512x2D
T9515x2D
25 cm
25 cm
30 cm
30 cm
38 cm
38 cm
2x25 cm
2x30 cm
2x38 cm
Impedance
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
2Ω
2Ω
2Ω
MAX
Power
1500W
1500W
2000W
2000W
2000W
2000W
3000W
4000W
4000W
RMS
Power
750W
750W
1000W
1000W
1000W
1000W
1500W
2000W
2000W
Dimensions
36,8x51,1x46,8 cm
36,8x51,1x46,8 cm
40,6x58,8x46,8 cm
40,6x58,8x46,8 cm
44,8x63,8x50,5 cm
44,8x63,8x50,5 cm
36,8x83,8x50,5 cm
40,6x90,3x50,5 cm
44,8x103,5x54,3 cm
SUPERWOOFER
The limits of imagination! The 8500 series has set new standards. When it comes to its construction it doesn’t get beefier
or more intimidating. When it comes to performance, it becomes fearless. The 8500s are a must to experience if you want
to understand the volume level and the amount of energy this
speaker is able to reach. The 8500’s basket is built like a tank
making it impossible to buckle under pain regardless how
powerful the amp it’s connected to. The magnet assembly is
so large that you have to wonder if its bigger than the actual
cone on the 10 inch. The Xmax here reaches 22mm one- way
(44mm total). Once we figure out how to make something bullet
proof, there’s no going back. The MTX molded connectors are
very handy when it comes to series or parallel configurations
thanks to their 10mm2 speaker cable capacity using BTR
Size
SLH-T8510A
SLH-T8510D
SLH-T8512A
SLH-T8512D
SLH-T8515A
SLH-T8515D
SLH-T8510x2A
SLH-T8510x2D
SLH-T8512x2A
SLH-T8512x2D
25 cm
25 cm
30 cm
30 cm
38 cm
38 cm
2x25 cm
2x25 cm
2x30 cm
2x30 cm
Impedance
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
MAX
Power
1000W
1000W
1000W
1000W
1200W
1200W
2000W
2000W
2000W
2000W
RMS
Power
500W
500W
500W
500W
600W
600W
1000W
1000W
1000W
1000W
Dimensions
36,8x51,0x46,0 cm
36,8x51,0x46,0 cm
40,6x58,8x46,0 cm
40,6x58,8x46,0 cm
44,8x63,7x49,9 cm
44,8x63,7x49,9 cm
36,8x83,8x49,9 cm
36,8x83,8x49,9 cm
36,8x83,8x49,9 cm
36,8x83,8x49,9 cm
FEATURES
ALDS Technology
✔
SPV Technology
✔
CET Technology
✔
Butyl Suspension
✔
Polypro/Carbon cone
✔
Cone in 1 piece
✔
Sealed Compatible
✔
Vented Compatible
✔
Stitched Cone/suspension ✔
MTX basket
✔
Aluminium basket
✔
StreetWires connectors
✔
X-max (1 way)
22mm
Power handling
10/10
Size
T8510-04
T8510-44
T8512-04
T8512-44
T8515-04
T8515-44
25 cm
25 cm
30 cm
30 cm
38 cm
38 cm
Impedance
4Ω
2x4Ω
4Ω
2x4Ω
4Ω
2x4Ω
MAX
Power
1000W
1000W
1000W
1000W
1200W
1200W
RMS
Power
500W
500W
500W
500W
600W
600W
Sensitivity
86,9dB
90,4dB
89,8dB
92,3dB
92,0dB
93,5dB
Xmax
Fs
Magnet
22mm
22mm
22mm
22mm
22mm
22mm
41,4Hz
44,8Hz
36,3Hz
38,8Hz
35,4Hz
32,0Hz
4080 gr
4080 gr
4540 gr
4540 gr
5000 gr
5000 gr
Cooling
sytem
SPV
SPV
SPV
SPV
SPV
SPV
Suspension
CET
CET
CET
CET
CET
CET
Response
Depth
Polypro-Carbon 41-150Hz
Polypro-Carbon 44-150Hz
Polypro-Carbon 36-150Hz
Polypro-Carbon 38-150Hz
Polypro-Carbon 35-150Hz
Polypro-Carbon 32-150 Hz
Cone
18,8cm
18,8cm
19,7cm
19,7cm
22,7cm
22,7cm
screws. The SuperWoofers are going to be a nightmare for our competitors.
Wanna get hit? Pounded? Slammed? Check out the 8500 SledgeHammer enclosures: the most attractive of the entire MTX range thanks to their piano lacquer
finish. They are all available in single (4 Ohm) and dual voice coil (2 Ohm) and
the enclosures come in single 25 and 30cm and double 25 and 30cm. They may
blow more than your mind!
SUPERWOOFER
Size
The really serious stuff starts...here! We’re not talking about
subwoofers anymore, we would rather call these speakers
SuperWoofers.
Once you take notice of the die-cast aluminium basket you
begin to realize you’re in for something pretty awesome. The
cone excursion is exceptional: 17mm linear one way making
it mandatory for the tinsel leads to be woven into the spider!
This SuperWoofer can move a lot of air. All our best technologies are thrown at the 7500’s : ALDS keeps the voice coil from
coming out of the gap, SPV cools the voice coil and CET ffor
longer wear on the rubber surround and suspension. We’ve
promised the world no less than the best products around and
we’re delivering on that promise spec by spec.
SLH-T7510A
SLH-T7510D
SLH-T7512A
SLH-T7512D
SLH-T7510x2A
SLH-T7510x2D
SLH-T7512x2A
SLH-T7512x2D
SLH-T7510x3A
SLH-T7510x3D
FEATURES
ALDS Technology
✔
SPV Technology
✔
CET Technology
✔
Butyl Suspension
✔
Polypro/Carbon cone
✔
Cone in 1 piece
✔
Sealed Compatible
✔
Vented Compatible
✔
Stitched Cone/suspension ✔
MTX basket
✔
Aluminium basket
✔
StreetWires connectors
X-max (1 way)
17mm
Power handling
9/10
Size
T7510-04
T7510-44
T7512-04
T7512-44
T7515-04
T7515-04
25 cm
25 cm
30 cm
30 cm
38 cm
38 cm
Impedance
4Ω
2x4Ω
4Ω
2x4Ω
4Ω
2x4Ω
Max
Power
800W
800W
800W
800W
800W
800W
RMS
Power
400W
400W
400W
400W
400W
400W
Sensitivity
88,5dB
90,6dB
89,4dB
92,1dB
91,9dB
95,0dB
Xmax
Fs
Magnet
17mm
17mm
17mm
17mm
17mm
17mm
47,0Hz
46,5Hz
45,2Hz
40,3Hz
28,6Hz
31,3Hz
2650 gr
2650 gr
2650 gr
2650 gr
3690 gr
3690 gr
Cooling
system
SPV
SPV
SPV
SPV
SPV
SPV
Suspension
CET
CET
CET
CET
CET
CET
Cone
Response
Depth
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
47-150Hz
46-150Hz
45-150Hz
40-150Hz
28-150Hz
31-150Hz
17,0cm
17,0cm
18,3cm
18,3cm
20,7cm
20,7cm
The enclosures also over perform with their progressive “slot” ports. The L-Port technology delivers amazing depth to the bass. The
7500 series SledgeHammers available in single (4 Ohm) and dual voice coil (2 Ohm) and the enclosures come in single 25 and 30cm,
double 25 and 30cm and a triple 25cm. Now that’s a heck of a lot of enclosures to choose from.
25 cm
25 cm
30 cm
30 cm
2x25cm
2x25cm
2x30 cm
2x30 cm
3x25cm
3x25cm
Impedance
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
Max
Power
800W
800W
800W
800W
1600W
1600W
1600W
1600W
2400W
2400W
RMS
Power
400W
400W
400W
400W
800W
800W
800W
800W
1200W
1200W
Dimensions
35,6x49,0x40,6 cm
35,6x49,0x40,6 cm
36,2x56,5x43,2 cm
36,2x56,5x43,2 cm
35,6x76,8x47,0 cm
35,6x76,8x47,0 cm
36,2x87,0x45,7 cm
36,2x87,0x45,7 cm
38,7x89,5x43,2 cm
38,7x89,5x43,2 cm
PERFORMANCEWOOFER
The evolution of the 5500 is truly worth talking about. The magnetic assembly is twice as big as the series it replaces and the
finish is magnificent.The cone is made of carbon-reinforced
polypropylene and covered with a layer of aluminium. It is a
one-piece design, which adds to the rigidity and takes care of
any issues with the dust cap. The Xmax on this sub has made
a big leap forward: 14mm one-way ( the more air you move the
more bass you’ll get). The cooling system is literally oversized:
technologies on board are the ALDS and the SPV. To assure
added reliability, the tinsel leads are wound into the spider thus
allowing for extreme excursions without risk of over stretching.
Proof again the engineers weren’t slacking off. Regarding the
overall design, they have out done themselves. Simply put this
sub looks awesome.
Size
T5510A
T5510D
T5512A
T5512D
T5510x2A
T5510x2D
T5512x2A
T5512x2D
T5510x3A
T5510x3D
25 cm
25 cm
30 cm
30 cm
2x25 cm
2x25 cm
2x30 cm
2x30 cm
3x25 cm
3x25 cm
Impedance
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
Max
Power
600W
600W
600W
600W
1200W
1200W
1200W
1200W
1800W
1800W
RMS
Power
300W
300W
300W
300W
600W
600W
600W
600W
900W
900W
Dimensions
35,6x49,0x40,6 cm
35,6x49,0x40,6 cm
36,2x56,5x43,2 cm
36,2x56,5x43,2 cm
35,6x76,8x47,0 cm
35,6x76,8x47,0 cm
36,2x87,0x45,7 cm
36,2x87,0x45,7 cm
36,2x87,0x45,7 cm
36,2x87,0x45,7 cm
FEATURES
ALDS Technology
✔
SPV Technology
✔
CET Technology
Butyl Suspension
✔
Polypro/Carbon cone
✔
Cone in 1 piece
✔
Sealed Compatible
✔
Vented Compatible
✔
Stitched Cone/suspension ✔
MTX basket
✔
Aluminium basket
StreetWires connectors
X-max (1 way)
14mm
Power handling
8/10
Size
T5508-04
T5508-44
T5510-04
T5510-44
T5512-04
T5512-44
T5515-04
T5515-44
20 cm
20 cm
25 cm
25 cm
30 cm
30 cm
38 cm
38 cm
Impe
dance
4Ω
2x4Ω
4Ω
2x4Ω
4Ω
2x4Ω
4Ω
2x4Ω
Max
Power
400W
400W
600W
600W
600W
600W
600W
600W
RMS
Power
200W
200W
300W
300W
300W
300W
300W
300W
Sensitivity
88,8dB
91,4dB
88,2dB
90,9dB
89,8dB
92,9dB
90,8dB
93,6dB
Xmax
Fs
14mm
14mm
14mm
14mm
14mm
14mm
14mm
14mm
41,1Hz
42,3Hz
35,3Hz
35,6Hz
29,2Hz
29,9Hz
21,3Hz
21,7Hz
Magnet Cooling
structure system
1150 gr
SPV
1150 gr
SPV
1700 gr
SPV
1700 gr
SPV
1980 gr
SPV
1980 gr
SPV
2300 gr
SPV
2300 gr
SPV
Cone
Response
Depth
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
41-150Hz
42-150Hz
35-150Hz
35-150Hz
29-150Hz
29-150Hz
21-150Hz
21-150Hz
12,6cm
12,6cm
15,6cm
15,6cm
16,9cm
16,9cm
19,2cm
19,2cm
All 5500 series SledgeHammer
come in single (4 Ohm) and
dual voice coil (2 Ohm) and the
enclosures are available as
single 25 and 30cm, double 25
and 30cm and a triple 25cm (our
personal favorite). The front
baffle on a Sledge is 40mm
thick. A few years back, MTX’s
slogan was “Serious about
Sound”. Now it could be “Serious about the Build”.
PERFORMANCEWOOFER
The Thunder4500 subs provide you with bass that goes way
beyond the price you paid for it. Pair them up with one of our
Thunder amplifiers and these woofers pump out as much volume as you can handle.
T4500s come in 38cm, 30cm, 25cm and 20cm and feature Asymmetrical Linear Drive System, Spider Plateau Venting technology, tinsel leads woven into the spider and mated to heavy duty
chrome push speaker terminals. Plus we’ve added a 220oC
copper voice coil wound on an Apical voice coil former for
extremely reliable, high power handling. The strontium ferrite
magnet yields a highly efficient speaker meaning it makes better use of your amplifier power.
Look for T4500 High Performance subwoofers in our exsclusive
and definitely impressive SledgeHammer enclosures. Availalble in single, dual or triple woofer configurations.
Woofer(s)
SLH-T4510A
SLH-T4512A
SLH-T4515A
SLH-T4510x2A
SLH-T4510x2D
SLH-T4512x2A
SLH-T4512x2D
SLH-T4510x3A
SLH-T4510x3D
25 cm
30 cm
38 cm
2x25 cm
2x25 cm
2x30 cm
2x30 cm
3x25 cm
3x25 cm
Impedance
4Ω
4Ω
4Ω
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
Max
Power
450 W
450 W
450 W
900 W
900 W
900 W
900 W
1350 W
1350 W
RMS
Power
225 W
225 W
225 W
450 W
450 W
450 W
450 W
675 W
675 W
Dimensions
35,6x49,0x38,7 cm
36,2x56,5x41,3 cm
42,5x59,1x47,6 cm
35,6x76,8x45,1 cm
35,6x76,8x45,1 cm
36,2x87,0x43,8 cm
36,2x87,0x43,8 cm
38,7x89,5x41,3 cm
38,7x89,5x41,3 cm
FEATURES
ALDS Technology
✔
SPV Technology
✔
CET Technology
Butyl Suspension
Polypro/Carbon cone
✔
Cone in 1 piece
✔
Sealed Compatible
✔
Vented Compatible
✔
Stitched Cone/suspension ✔
MTX basket
✔
Aluminium basket
StreetWires connectors
X-max (1 way)
9,4mm
Power handling
7/10
Size
T4508-04
T4510-04
T4510-44
T4512-04
T4512-44
T4515-04
T4515-44
20 cm
25 cm
25 cm
30 cm
30 cm
38 cm
38 cm
Impedance
4Ω
4Ω
2x4Ω
4Ω
2x4Ω
4Ω
2x4Ω
Max
Power
200W
450W
450W
450W
450W
500W
500W
RMS
Power
100W
225W
225W
225W
225W
250W
250W
Sensitivity
85,6dB
87,6dB
90,4dB
89,8dB
92,1dB
89,3dB
91,4dB
Xmax
Fs
5,4mm
9,4mm
9,4mm
9,4mm
9,4mm
9,4mm
9,4mm
39,8Hz
35,4Hz
39,1Hz
29,9Hz
29,2Hz
22,6Hz
24,5Hz
Magnet Cooling
Structure system
450gr
SPV
850gr
SPV
850gr
SPV
1000gr
SPV
1000gr
SPV
1417gr
SPV
1417gr
SPV
Cone
Response
Depth
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
39-150Hz
35-150Hz
39-150Hz
29-150Hz
29-150Hz
22-150Hz
21-150Hz
9,1cm
12,2cm
12,2cm
13,5cm
13,5cm
16,8cm
16,8cm
���������
Woofer(s)
SLH-T4510-200
SLH-T4512-200
SLH-T4510x2-200
SLH-T4512x2-200
SLH-T4510x3-200
25 cm
30 cm
2x25 cm
2x30 cm
3x25 cm
RMS
Power
200 W
200 W
200 W
200 W
200 W
ClassD Optional
Amp
EBC
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
MTX aUDIO amps
MZS line
Technology driven amplifiers that stand out from the crowd.
From ISMT (intelligent surface mount technology), pure N-Channel final
output stages, mono block Class-D design and Intelli-Sense auto turn-on,
to 12 and 24dB/oct variable crossovers and Remote Subwoofer control.
Our engineers had just one goal in mind: Reliable Performance for a better and more powerful car audio system.
MTX Audio MXA amplifiers are not for just anyone. They are for those
who live Fast and love music Loud and Clean with the same spirit and attention to detail as your hot «tuned for the streets» car. You demand, MXA
amplifers deliver. With sonic accuracy you’ll think your favorite band has
hitched a ride in your car.
MZS performance subwoofers.
Lets see what our engineers were thinking about when designing these
subs: More bass, Zero failure and Sound quality. Achieved using SPV for
voice coil cooling, ALDS for cone control and max linear excursion, Spi-
Size
MZS10-04
MZS12-04
25 cm
30 cm
Impe
dance
4Ω
4Ω
Max
Power
600W
600W
RMS
Power
300W
300W
der with interlaced tinsel leads and a big strong magnet structure. When
you talk about cars it is all about performance. When you talk about subs
you also want performance, High performance! That’s the deal with MTX
Audio MZS subwoofers.
The newest brand to join the Mitek family. After the overwhelming success of the SledgeHammers introduced in 2004, we
decided to make the boxes available unloaded. The unique
slot port and edgy design of Bass Slammer vented enclosures is so advanced, that they deliver deeper bass in a smaller
enclosure compared to a standard vented box. They are built
using a 20mm thick MDF front baffle, internal bracing to eliminate flexing and warping thus tightening up the bass response, come universally carpeted and are delivered with all
the parts needed to install any sub yourself with ease. There
are 3 models to choose from: single 20cm, single 25cm and
single 30cm. Tuning frequency is incredibly low, at 33 to 38Hz.
Bass Slammers are built to Hit and Hit Hard!
Magnet SuspenFs
Cone
Response Depth
structure sion
14mm 35,3Hz 1700 gr Butil Polypro-Carbon 35-150Hz 15,6cm
14mm 29,2Hz 1980 gr Butil Polypro-Carbon 29-150Hz 16,9cm
Sensitivity Xmax
88,2dB
89,8dB
MXS line
MXS Subwoofers when Bass needs to be seriously Loud!
These are our Mad eXcursion Superwoofers in the MTX Audio line. With
34mm Total Linear Excursion (17mm one way linear) these subs are moving air! All MTX subwoofer technologies come standard including the
spider with interlaced tinsel leads, after all we are dealing with high Ex-
cursion Superwoofers. Broken or ratteling leads are out of the question!
The big strong magnet and MTX designed Die Cast Aluminium basket
scream out we are dealing with a Bass Engine. Only the best Bass is
good enough for your tuned and maxed out street car: MXS. Deep, Loud,
Powerful Bass!
Woofer Volume
Channel Power
Power
Bridged Low pass
Class @ 2Ω CEA @4Ω CEA power 4Ω
x-over
MXA8001
1D
1x800W 1x400W
24dB/oct
BS112V
BS110V
BS108V
High pass
X-over
EBC
Bass
RCA
High level Auto
x-over
frequency remote
boost
input
input
remote
subsonic 40 to 200Hz included 0 to +18dB @40Hz 0,2 to 5V
yes
yes
MXA6001
1D
1x600W
1x300W
24dB/oct
subsonic
40 to 200Hz included 0 to +18dB @40Hz 0,2 to 5V
yes
yes
MXA4001
1D
1x400W
1x200W
24dB/oct
subsonic
40 to 200Hz included 0 to +18dB @40Hz 0,2 to 5V
yes
yes
MXA4002
2 AB
2x200W
2x100W
1x400W
12dB/oct
12dB/oct
40 to 350Hz included 0 to +18dB @40Hz 0,2 to 5V
yes
yes
MXA3002
2 AB
2x150W
2x75W
1x300W
12dB/oct
12dB/oct
40 to 350Hz included 0 to +18dB @40Hz 0,2 to 5V
yes
yes
MXA6004
4 AB
4x150W
4x75W
2x300W
12dB/oct
12dB/oct
40 to 350Hz included 0 to +18dB @40Hz 0,2 to 5V
yes
yes
MXA4004
4 AB
4x100W
4x50W
2x200W
12dB/oct
12dB/oct
40 to 350Hz included 0 to +18dB @40Hz 0,2 to 5V
yes
yes
Size
MXS10-04
MXS12-04
25 cm
30 cm
Impedance
4Ω
4Ω
Max
Power
800W
800W
RMS
Power
400W
400W
SensiCooling SuspenXmax
Fs
Magnet
Cone
Response Depth
tivity
system
sion
88,44dB 17mm 47,0Hz 2650 gr
SPV
CET
Polypro-Carbon 47-150Hz 17,0cm
89,4dB 17mm 45,2Hz 2650 gr
SPV
CET
Polypro-Carbon 45-150Hz 18,3cm
30 cm
25 cm
20 cm
50 l
42 l
35 l
Fb
Dimensions
38Hz
38Hz
38Hz
38,1x38,1x50,8cm
36,8x36,8x50,8cm
30,4x33,0x50,8cm
The RoadThunder subwoofers feature: a mica filled polypropylene
cone, a double row of stitching that binds the cone to the surround,
insulated tinsel leads, high-end compression terminals, special double
5-spoke basket painted “bright fire engine red”.
All RoadThunder subwoofers use ALDS(1) to obtain High
output with Low distortion and SPV(2) to keep the
voice coil cool.
RoadThunder subwoofers play in different
types of enclosures. From very small sealed
enclosures for listening to music, to high
output vented enclosures when high
SPL is wanted. In the manual that is
incorporated with each subwoofer
there are 3 examples for sealed
enclosures and 6 examples for
vented enclosures.Just choose
your enclosure!
RoadThunder amps
MTX amplifiers have a huge reputation! They deliver clean high power,
high quality sound. They are very reliable and very flexible. RoadThunder
amps will meet and even exeed all
expectations.
The proof of this reputation?
For more than five years MTX amplifiers have been winning trophies
in caraudio competitions all around
the world!
Each amplifier has incorporated technologies that are 2 steps ahead of the
competition: Surface mount Technologie (SMT), cellular approach, pure
N-channel design, MOSFET power
supply, V-FET power stage, adaptive
class-D... to name just a few!
The new RoadThunder amplifiers are
no exeption, they are packed with
features as: high or low pass18dB/octave x-overs, thunder EQ, line output,
smart engage....
The RT251D is a class-D subwoofer
amplifier optimized for use with a 2
Ohm load. It will produce high power
output with low power consumption.
Use this amplifier with 2 RT12-04
subwoofers and be amazed!
(1) ALDS = Asymmetrical Linear
Drive System, a flat progressive
spider and an extended pole
piece inside the magnet, ensure
a very good control of the cone
motion during loud bass: High output with low distortion.
(2) SPV = Spider Plateau Venting,
forced air cooling of the voice coil
directly where the voice coil gets the
hottest: More power handling and
better bass.
Size
RT10-04
RT10-44
RT12-04
RT12-44
RT15-04
RT15-44
25 cm
25 cm
30 cm
30 cm
38 cm
38 cm
Impedance
4Ω
2x4Ω
4Ω
2x4Ω
4Ω
2x4Ω
Max
Power
400W
400W
400W
400W
450W
450W
RMS
Power
200W
200W
200W
200W
225W
225W
Voice Coil
Cooling System
SPV
SPV
SPV
SPV
SPV
SPV
Cone
Voice Coil
Sensitivity
Fs
X-max
Material
Diameter
Polypropylene
38 mm
87,9dB
34,7Hz 9,4mm
Polypropylene
38 mm
88,0dB
35,3Hz 9,4mm
Polypropylene
38 mm
90,4dB
31,3Hz 9,4mm
Polypropylene
38 mm
89,8dB
33,4Hz 9,4mm
Polypropylene
51 mm
91,2dB
25,5Hz 9,4mm
Polypropylene
51 mm
91,4dB
25,5Hz 9,4mm
Frequency
Response
34 - 150 Hz
35 - 150 Hz
31 - 150 Hz
33 - 150 Hz
25 - 150 Hz
25 - 150 Hz
���������
Woofer(s)
RT10-200
RT12-200
RT10x2-200
RT12x2-200
25 cm
30 cm
2x25 cm
2x30 cm
RMS
Power
200 W
200 W
200 W
200 W
ClassD
Amp
yes
yes
yes
yes
Optinal
EBC
yes
yes
yes
yes
RoadThunder loaded enclosures.
Enclosures designed and build by MTX and loaded with RoadThunder subwoofers. Not only do
they sound great, they also look great and take
up as less trunkspace as possible. Finished with
very durable grey carpet that compliments the great looks
of the subwoofers like: the red basket, the black mica filled polypropylene cone with the MTX AUDIO logo in the middle and the double row of red
stitching. Designed with a triangle shape these enclosures will match perfectly with the
back of the backseat taking up as less trunkspace as possible. Designed for the RoadThunder subwoofers ensures that these RoadThunder loaded enclosures will deliver deep and
loud bass. RoadThunder loaded enclosures are availlable in single 25 and 30cm, dual 30cm
and tripple 25cm.
RT251d
RT202
RT404
Power
2Ω
1x250W
2x100W
4x100W
Power
4Ω
1x125W
2x50W
4x50W
Bridged
Power
1x200W
2x200W
Low-pass
High-pass
X-over
X-over
X-over
Frequency
18dB/oct
85Hz
18dB/oct
18dB/oct
85Hz
18dB (rear) 18dB (front/rear)
85Hz
Bass
Boost
yes
RCA
Input
8volts
8volts
8volts
High level
Input
yes
yes
yes
Line
Out
yes
yes
yes
Woofer(s)
RT10
RT12
RT12x2
RT10x3
25 cm
30 cm
2 x 30 cm
3 x 25 cm
Max
Power
400 W
400 W
800 W
1200 W
RMS ImpedDimensions
Power ance
200 W
4Ω
30,7x30,2x40,3 cm
200 W
4Ω
36,5x39,7x45,7 cm
400 W
4Ω
36,1x76,8x45,0 cm
600 W
4Ω
33,7x89,5x36,8 cm
amplifiers
Coustic engineers have created a revolutionary new design that gives
a whole new adrenaline rush to any street enthusiast. It starts with the
sleek, extruded aluminum. The heat sinks are purposely oversized to
optimize heat dissipation and now come in anodized light grey with the
ends wrapped in carbon. Each amp comes stock with a wire remote
for optimal bass control. The speaker inputs are very easy to work with
as you now screw the cables straight into the connector: more solid
and better conductivity. All you need is a BTR driver and you’re set.
There are other developments that have taken place inside the amp.
Intelli-Sense allows for auto turn on for easy installation with factory
radios. The output stages of the new amps are equipped with Vfets
(a special type of Mosfet). They are more dynamic and quicker in response. The four new ClassD amplifiers are even more efficient: they’re
optimised to operate at 2 Ohm, that’s two 4 Ohm subs in parallel. With
over 85% efficiency with the ClassD you have more power with less
current demand.
The amp doesn’t even get hot, proof there’s no loss. The 2005 Coustic
amp range is made up of 10 models. The specs can be found on the
following chart.
1600DB
1 ClasseD
Power
CEA @2Ω
1x800W
1200DB
1 ClasseD
1x600W
1x300W
24dB/oct
subsonic
40 to 200Hz included 0 to +18dB @40Hz 0,2 to 5V
yes
yes
800DB
1 ClasseD
1x400W
1x200W
24dB/oct
subsonic
40 to 200Hz included 0 to +18dB @40Hz 0,2 to 5V
yes
yes
600DB
1 ClasseD
1x300W
1x150W
24dB/oct
subsonic
40 to 200Hz included 0 to +18dB @40Hz 0,2 to 5V
yes
yes
1200S
2
2x300W
2x150W
1x600W
12dB/oct
12dB/oct
40 to 350Hz included 0 to +18dB @40Hz 0,2 to 5V
yes
yes
800S
2
2x200W
2x100W
1x400W
12dB/oct
12dB/oct
40 to 350Hz included 0 to +18dB @40Hz 0,2 to 5V
yes
yes
600S
2
2x150W
2x75W
1x300W
12dB/oct
12dB/oct
40 to 350Hz included 0 to +18dB @40Hz 0,2 to 5V
yes
yes
400S
2
2x100W
2x50W
1x200W
12dB/oct
12dB/oct
40 to 350Hz included 0 to +18dB @40Hz 0,2 to 5V
yes
yes
1200Q
4
4x150W
4x75W
2x300W
12dB/oct
12dB/oct
40 to 350Hz included 0 to +18dB @40Hz 0,2 to 5V
yes
yes
800Q
4
4x100W
4x50W
2x200W
12dB/oct
12dB/oct
40 to 350Hz included 0 to +18dB @40Hz 0,2 to 5V
yes
yes
Channel
Power
CEA @4Ω
1X400W
Bridged
power 4Ω
Low-pass
x-over
24dB/oct
High-pass
X-over
RS
RCA High level IntelliBass boost
x-over
frequency remote
input
input
Sense
subsonic 40 to 200Hz included 0 to +18dB @40Hz 0,2 to 5V
yes
yes
enclosures
Car stereo tuning made easy, Coustic
loaded enclosures.
Small sealed boxes that fit in almost
every car. Triangular shaped to fit perfectly to the back of the rear seat taking
up as little trunkspace as possible.
Finished with black aviation grade carpeting. Designed to get the best from
the Coustic subs, high power handling
with fast and furious bass. The 2 ohm
“D” version boxes are created to get
maximum power out of the Coustic
ClassD amps. Do you want to win the
race for bass? Try the BP12x2D with the
800DB, be first and setup the photo finish for second and third.
subwoofers
The right rims under your tuned car are very important. For
Coustic this means having the right subs with your amps. Coustic subwoofers scream for attention, designed to be driven hard
and to put out tight accurate bass. Built using the strongest,
most durable parts and advanced technolgies. On the Bass
Pump (BP) woofer (Real ones!) you can find a black textured
polypropylene cone and dustcap, a double row yellow stiched
cone, a original yellow stamped steel basket and high end
spring terminals. BP subs have a black spider and use ALDS
(1*) and SPV (2*) to deliver Deep Loud Bass withut distortion
all day long. Now you know that these subs are designed by
BP104
ImpeDiameter dance
25cm
4Ω
the best engineers...
1* ALDS Asymmetrical Linear Drive System: extended pole
piece + flat progressive spider. The progressive spider gives
you all the detail at low level (listening to music) and full control
at high level (BOOM)
2* SPV Spider Plateau Venting: forced air cooling of the voice
coil. When the cone moves forward cold air is sucked into the
Airgap to directly cool the voice coil, when the cone moves
backward the warmed up air is pushed out making room for
new cold air.
Try to imagine that the Carbon Fiber (CF) woofers are even better!
These have a real carbon fiber cone. It is as hard as a rock yet
as light as a feather. That’s just what we need! The very flexible
and resistant rubber surround is stitched to the cone with yellow
strand. The strong injected aluminium basket is painted in yellow.
You’ll never see it vibrating! The power handling is very high, we
are talking about a serious woofer here. The magnet structure is
oversized, the back and front plates are chromed. Looks Great!
For sure, these subs are using the finest technologies. The ALDS
(1*) provides good sound qualit and very high power handling at
the same time. If you like your bass to be fast and furious, CF
subs are your choice, let ‘em hear you coming.
Max
power
400W
RMS
power
200W
Sensitivity
Fs
X-max
Cone
Surround
Basket
ALDS
SPV
88,7dB
34,3Hz
9,1mm
Polypropylene
Foam
Steel
Yes
Yes
Mounting
depth
11,1cm
BP10a
25 cm
Max
power
400 W
RMS
power
200 W
Diameter
Impe- Sensidance tivity
4Ω
88,7 dB
Dimensions
30,7x30,2x40,3 cm
BP1044
25cm
2x4Ω
400W
200W
88,2dB
36,5Hz
9,1mm
Polypropylene
Foam
Steel
Yes
Yes
11,1cm
BP12a
30 cm
400 W
200 W
4Ω
89,9 dB
36,5x39,7x45,7 cm
BP124
30cm
4Ω
400W
200W
89,9dB
31,4Hz
9,1mm
Polypropylene
Foam
Steel
Yes
Yes
13,0cm
BP10x2a
2x25 cm
800 W
400 W
4Ω
91,7 dB
31,1x61,5x40,6 cm
BP1244
30cm
2x4Ω
400W
200W
89,7dB
34,7Hz
9,1mm
Polypropylene
Foam
Steel
Yes
Yes
13,0cm
BP10x2d
2x25 cm
800 W
400 W
2Ω
91,5 dB
31,1x61,5x40,6 cm
CF104
25cm
4Ω
800W
400W
83,0dB
36,7Hz 11,4mm
Carbon
Rubber
Aluminium
13,0cm
BP12x2a
2x30 cm
800 W
400 W
4Ω
92,9 dB
36,1x76,8x45,0 cm
CF124
30cm
4Ω
800W
400W
86,6dB
33,3Hz 11,4mm
Carbon
Rubber
Aluminium
14,7cm
BP12x2d
2x30 cm
800 W
400 W
2Ω
92,7 dB
36,1x76,8x45,0 cm
X amps
X subs
Pure power and presence – Redefined
Class, style, and performance are three words that have become synonymous with Xtant. The new X2 subwoofer is no exception. Capitalizing on proven
product components, X2 delivers unprecedented subwoofer accuracy and reliability. The exclusive cosmetic design adds style to any vehicle fortunate
enough to have them. Many of the same revolutionary features that Xtant woofers have been known for have been carefully carried through an evolution
to bring you X2. Increased power handling, increased motor size, strength and increased displacement collaborate to make the X2 subwoofer the best
in its class. The Hex-shaped cone with aluminum honeycomb dust cap provides approximately 10% more cone area than conventional round woofers.
This means you get first class engineering, exclusive style, and high performance SPL from Xtant’s hexagonal cone. The Hex-shape compression molded
gasket also allows multiple woofers to be mounted side-by-side creating a “honeycomb” effect for maximum bass performance. Other innovative features
of the X2 subwoofers from Xtant include:
• Spider Plateau Venting for extremely effective heat dissipation by providing cooling around the voice coil (where the most heat is generated).
• Dual 8 gauge, set screw terminals – Accepts up to 2 negative and 2 positive 8 AWG speaker cables for maximum signal transfer and ease of installation.
• Steel, chrome plated back plate
for increased thermal mass which greatly improves heat
dissipation while giving the
woofer the custom finish look.
• Black, custom tooled, die
cast aluminum basket transitions the basket to fit into a
standard round enclosure
cutout. • Die cast aluminum heat sink that encases the
motor and removes heat
directly from the voice coil gap for maximum power handling. X2 series subwoofers are sure to be a hit. Superior components, superior
design, superior engineering all set Xtant products and X2 subwoofers
apart from any other
brand in the industry.
The Modules
PQM: a true, fully adjustable, one band
parametric EQ—provides individual frequency,
Q/bandwidth, and boost or cut of up to 18dB gain adjustment control.
LFQ
: provides +4, +8, or +12dB of boost at a center freq. of 45Hz
RGM: adds remote gain control for either sub or stereo channels
RM12: activates the “passive speaker terminals» providing 12dB of attenuation for speakers connected to these terminals
RM8: activates the “passive speaker terminals» providing 8dB of attenuation for speakers connected
to these terminals
RM4: activates the “passive speaker terminals» providing 4dB of attenuation for speakers connected
to these terminals
X603E
Nbr of
Channel
3
Power
@4Ω 12V
2x75+150W
Power
@2Ω 12V
2x150+300W
Bridged
Power @4Ω
2 x 300 W
Low-pass
X-over
12 or 24dB
High-pass
X-over
12 or 24dB
Band-pass
X-over
12 or 24dB
Xover
Frequency
20 to 20kHz
High
Level
Yes
Incorporated
Modules
PQM, LFQ, RGM, RM4, RM12
X604E
4
4 x 75 W
4 x 150 W
2 x 300 W
12 or 24dB
12 or 24dB
12 or 24dB
20 to 20kHz
Yes
PQM, RM4, RM12
X1001E
1
1 x 500 W
1 x 1000 W
12 or 24dB
12 or 24dB
12 or 24dB
20 to 20kHz
Yes
PQM, RGM, LFQ
X2-1004
25cm
Impedance
4Ω
RMS
power
500W
X2-1044
25cm
2x4Ω
X2-1204
30cm
X2-1244
30cm
Diameter
X-max
Cone
Surround
Basket
ALDS
SPV
18mm
Polypropylene
Butil
Die cast
Yes
Yes
500W
18mm
Polypropylene
Butil
Die cast
Yes
Yes
4Ω
500W
18mm
Polypropylene
Butil
Die cast
Yes
Yes
2x4Ω
500W
18mm
Polypropylene
Butil
Die cast
Yes
Yes
XT1.i : THE BIGGEST LITTLE AMP IN CAR AUDIO HISTORY !
Xtant has shattered the myth that Class D is only for bass. With the Xtant1.1i, Xtant proves Class D can
deliver strikingly accurate sound across the entire musical spectrum.
The XT1.1i is a full-range amplifier which incorporates proprietary Class D technology developed over
a five-year period inside the walls of Xtant’s electronic design labs in Phoenix, Arizona.
Said Chairman and CEO Loyd Ivey, “We’re pushing beyond the limits of what everyone thought was
possible. For years, it’s been, ’You can’t use Class D for mid and high frequency applications.’ We
took that challenge and proved that with talent and ingenuity, you can do anything."
With its unique Class D technology, called Audiophile, Full-spectrum Class D, Xtant engineers have given listeners all the efficiency of Class D. The result is less current draw
for powerful bass reproduction while delivering audiophile-level sound quality at higher
frequencies. At just over 5"w X 6"h, the xtant1.1i measures about the size of a CD jewel
case from corner to corner -taking up very little space on a display board. It’s perfect
for stealth installs or when space is at a premium in compact cars or family vehicles.
Mount it under seats, in the glove compartment, under the dashboard, or even in the
center console.
Beautifully aesthetic design, transparent and detailed sound reproduction, innovative technology... are the first three criteria by which all high end amplifiers
and speakers are judged. And Xtant does not fail to satisfy even the most demanding esoteric enthusiast. The heat sink is a polished stainless steel shield with
original designed hexagonal cut outs making the appearance of the amplifier
quite unique and definitely tasteful. XTC offers the most effective cooling system
known in the car audio environment. It allows for the outboard transistors to heat
up quickly which generates the warmth in the sound quality that every audiophile aficionado expects. XTC is even more effective when it comes to cooling down
those same transistors and the rest of the components in the amplifier. Using thin
sheets of sandwiched aluminium as a heat sink and medical grade ventilators for
reliability and noise, the amplifiers remain at a constant 60°c regardless of the
speaker load that it is connected to or the climate the vehicle is exposed to.
XT amps
A descriptive a product demands, to achieve
a long lasting image much like the most reputable classic sports cars have: Bugatti,
Ferrari Porsche, Maserati, Mercedes...Xtant
should be exactly what the car audiophile is
in quest of: tight deep bass, dynamic mids
and detailed highs.
The Xtant XT range suits every system configuration with an array of 5 models. For the
subs there are two Mono Blocks to choose
from: the 6.1 at 600W (CEA) and the 3.1
with 300W. Both incorporate features such
as balanced differential inputs, 24dB/Oct.
continuously variable low pass crossover,
24dB/Oct. subsonic filter between 20 and
80Hz, remote level control, N-channel MOSFet output section and a fully regulated,
transitional, ClassD power supply. The mid
and high range frequencies can be powered
either by the 4.1 - a 400W four channel amplifier - or the 2.1 offering 200W of stereo amplification. These amps offer balanced differential inputs allowing up to 17V, a 12dB/oct.
on the high pass and 24dB/oct. for the lows,
active resonance control to take away the
frequency bandwidth often affecting the mid
range frequencies due to car reverberation,
a continuously variable 0-12dB bass boost,
left right independent gains, full range RCA
outputs, N-channel, MOS-Fet output stage
and a fully regulated PWM power supply.
The 4.1 also bridges 2 rear channels easily
to configure a 3 channel system. For the ultimate in stereo separation and power supply
efficiency there’s the latest 1.1i (see above).
Once experienced the sound quality of an XT
amplifier will leave you addicted to a world of
beautiful music reproduction.
XT2.2
Nbr of
Channel
2
Power
2Ω 12V
2x100W
Power
4Ω 12V
2x50W
Bridged
Power
1x200W
Low-pass
Xover
24dB/oct
XT4.4
4
XT3.1
1
XT6.1
XT1.1i
High-pass
Xover
12dB/oct
Xover
Frequency
40 to 120Hz
4x100W
4x50W
2x200W
1x300W
1x150W
24dB/oct
12dB/oct
40 to 120Hz
24dB/oct
subsonic
40 to 120Hz
Yes
1
1x600W
1x300W
24dB/oct
subsonic
40 to 120Hz
Yes
1
1x100W
1x100W
EBC
Yes
Line
Out
Yes
High
Level
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
ARC
ZERO NOISE INTERCONNECTS
StreetWires ZeroNoise® interconnects are the most sophisticated mobile audio
cables in the world. With the «top of the art» ZN6, Street wires gives the best
RCA cable of the caraudio world. All ZN Interconnects feature -Ttwisted-pair
construction for all of the music with none of the noise -The connector size and
shape is designed for true functionality easy to grip, and easy to install, patented
ZN6 Interconnects
ZN605
2-Channel, 0,5m (1.6ft)
ZN610
2-Channel, 1m (3.3ft)
ZN620
2-Channel, 2m (6.5ft)
ZN635
2-Channel, 3,5m (11.5ft)
ZN650
2-Channel, 5m (16.4ft)
ZN660
2-Channel, 6m (19.7ft)
ZN6FMM Y-Connector, 1F/2M
ZN6MFF Y-Connector, 1M/2F
ZN3 INTERCONNECTS
ZN305
2-Channel, 0,5m (1.6ft)
ZN310
2-Channel, 1m (3.3ft)
ZN320
2-Channel, 2m (6.5ft)
ZN335
2-Channel, 3,5m (11.5ft)
ZN350
2-Channel, 5m (16.4ft)
ZN360
2-Channel, 6m (19.7ft)
ZN3204
4-Channel, 2m (6.5ft)
ZN3504
4-Channel, 5m (16.4ft)
ZN3604
4-Channel, 6m (19.7ft)
ZN3FMM Y-Connector, 1F/2M
ZN3MFF Y-Connector, 1M/2F
speaker cables
ZeroNoise® Compact Sure Grip design -The connectors are 24-karat Gold Plated
for maximum signal transfer and corrosion protection -Split-tip RCA center pins
for the most secure contact. These cables are the best you can expect for your
high-end system.
ZN2 INTERCONNECTS
ZN205
2-Channel, 0,5m (1.6ft)
ZN210
2-Channel, 1m (3.3ft)
ZN220
2-Channel, 2m (6.5ft)
ZN235
2-Channel, 3,5m (11.5ft)
ZN250
2-Channel, 5m (16.4ft)
ZN260
2-Channel, 6m (19.7ft)
ZN2204
4-Channel, 2m (6.5ft)
ZN2504
4-Channel, 5m (16.4ft)
ZN2604
4-Channel, 6m (19.7ft)
ZN2FMM Y-Connector, 1F/2M
ZN2MFF Y-Connector, 1M/2F
ZNV VIDEO INTERCONNECTS
ZNV10
Video, 1m (3.3ft)
ZNV35
Video, 3,5m (11.5ft)
ZNV50
Video, 5m (16.4ft)
ZNV60
Video, 6m (3.3ft)
ZNV35Y Video, Y-cable 3,5m (11.5ft)
ZNV60Y Video, Y-cable 6m (19.7ft)
ZNAV35 Audio/Video cable, 3,5m (11.5ft)
ZNAV60 Audio/Video cable, 6m (19.7ft)
Ultra Cable®
• Fine-stranded high conductivity tinned copper windings
• Clear/Trans Blue Ultra-Flex jacketing
• Twisted construction
• Zero-grip insulation for smooth installations
amps power kits
PS00BX
PS00R
PS04B
PS04R
PS04BS
PS04RS
PS04BSI
PS04RSI
PS08B
PS08R
PS08BI
PS08RI
PS10B
PS10R
PS10BI
50mm2 power kit : 5,5m Blue + 1,5m Silver Cable, 4,8m remote
cable, ANL inline fuse holder, 200A ANL Fuse, Battery terminal,
Ground terminal, Power ring terminal
50mm2 power kit : 5,5m Red + 1,5m Silver Cable, 4,8m remote
cable, ANL inline fuse holder, 200A ANL Fuse, Ground terminal,
Power ring terminal
21mm2 multi amp power kit : 5,5m Blue 21mm2 + 3m Blue 10mm2
+ 2,4m Silver 10mm2 Cable, 4,8m remote cable, AGU inline fuse
holder, 80A AGU Fuse, distribution block 21mm2 in 4x10mm2 out,
Power ring terminals
21mm2 multi amp power kit : 5,5m Red 21mm2 + 3m Red 10mm2
+ 2,4m Silver 10mm2 Cable, 4,8m remote cable, AGU inline fuse
holder, 80A AGU Fuse, distribution block 21mm2 in 4x10mm2 out,
Power ring terminal
21mm2 power kit : 5,5m Blue + 1,5m Silver Cable, 4,8m remote
cable, AGU inline fuse holder, 80A AGU Fuse
21mm2 power kit : 5,5m Red + 1,5m Silver Cable, 4,8m remote
cable, AGU inline fuse holder, 80A AGU Fuse
21mm2 power kit : 5,5m Blue + 1,5m Silver Cable, AGU inline fuse
holder, 80A AGU Fuse, 5m ZN2 RCA with remote cable
21mm2 power kit : 5,5m Red + 1,5m Silver Cable, AGU inline fuse
holder, 80A AGU Fuse, 5m ZN2 RCA with remote cable
10mm2 power kit : 5,5m Blue + 1,5m Silver Cable, 4,8m remote
cable, AGU inline fuse holder, 60A AGU Fuse
10mm2 power kit : 5,5m Red + 1,5m Silver Cable, 4,8m remote
cable, AGU inline fuse holder, 60A AGU Fuse
10mm2 power kit : 5,5m Blue + 1,5m Silver Cable, AGU inline fuse
holder, 60A AGU Fuse, 5m ZN2 RCA with remote cable
10mm2 power kit : 5,5m Red + 1,5m Silver Cable, AGU inline fuse
holder, 60A AGU Fuse, 5m ZN2 RCA with remote cable
6mm2 power kit : 5,5m Blue + 1,5m Silver Cable, 4,8m remote
cable, AGU inline fuse holder, 30A AGU Fuse
6mm2 power kit : 5,5m Red + 1,5m Silver Cable, 4,8m remote
cable, AGU inline fuse holder, 30A AGU Fuse
6mm2 power kit : 5,5m Blue + 1,5m Silver Cable, AGU inline fuse
holder, 30A AGU Fuse, 5m ZN2 RCA with remote cable
power
distribution
Super Cable®
• Fine-stranded high conductivity copper windings
• Clear Ultra-Flex jacketing
• Low-profile parallel design for easy installations
• Zero-grip insulation for smooth installations
SC1450 Super Cable, 2mm2 (14AWG), 15,2m (50’), Clear
SC14500 Super Cable, 2mm2 (14AWG), 152m (500’), Clear
SC1650 Super Cable, 1,5mm2 (16 AWG), 15,2m (50’), Clear
SC16500 Super Cable, 1,5mm2 (16 AWG), 152m (500’), Clear
UC12250
UC12500
UC14250
UC14500
Ultra Cable, 3,3mm2 (12AWG), 76m (250’), Clear/trans blue
Ultra Cable, 3,3mm2 (12AWG), 152m (500’), Clear/trans blue
Ultra Cable, 2mm2 (14AWG), 76m (250’), Clear/trans blue
Ultra Cable, 2mm2 (14AWG), 152m (500’), Clear/trans blue
power cables
Combo Fuse Block
• Positive and negative power cables in one
footprint
• Power Ring® inputs accept any size input cable
• Four 21mm2 positive and negative outputs also
accept 10mm2 gauge
• Diamond plate finish with gold details
• Available in AGU, MAXI and AFS
CBR44A AGU Combo Fuse block
CBR44M MAXI Combo Fuse block
CBR44S AFS Combo fuse bloc
2 Position Fused Distribution Blocks
• Available in AGU, MAXI and AFS
• Exclusive ribbed base design ensures proper
fuse alignment
• Spring steel clips provide lifelong tight fuse
contact
• Power Ring® main input connection accepts any
gauge power cable
FBR24A 2 Position AGU Fuse Holder
FBR24M 2 Position MAXI Fuse Holder
FBR24S 2 Position AFS Fuse Holder
Ultra Flow® Power Cable
• “The ultimate performance power cable”
• 105 °C temperature rating
• Available in clear and translucent red, blue or black jacketing
with silver-colored, tinned copper wire
• Poly FlexTM insulation resists battery acid, oil and gasoline
UF050R
UF050BL
UF050S
UF050BK
50mm2 (1/0 AWG) Red, 4256 strands, 15,2m (50’) Reel
50mm2 (1/0 AWG) Blue, 4256 strands, 15,2m (50’) Reel
50mm2 (1/0 AWG) Silver, 4256 strands, 15,2m (50’) Reel
50mm2 (1/0 AWG) Black, 4256 strands, 15,2m (50’) Reel
UF4100R
UF4100BL
UF4100S
UF4100BK
21mm2 (4 AWG) Red, 1672 strands, 30,5m (100’) Reel
21mm2 (4 AWG) Blue, 1672 strands, 30,5m (100’) Reel
21mm2 (4 AWG) Silver, 1672 strands, 30,5m (100’) Reel
21mm2 (4 AWG) Black, 1672 strands, 30,5m (100’) Reel
UF8250R
UF8250BL
UF8250S
UF8250BK
10mm2 (8 AWG) Red, 665 strands, 76,2m (250’) Reel
10mm2 (8 AWG) Blue, 665 strands, 76,2m (250’) Reel
10mm2 (8 AWG) Silver, 665 strands, 76,2m (250’) Reel
10mm2 (8 AWG) Black, 665 strands, 76,2m (250’) Reel
Expandable Power Distribution Blocks
• Expandable design for unlimited adaptability
DB0240
Diamond Plate Finish, Input: 50mm2 (2),
Output: 21mm2 (2)
DB0480
Diamond Plate Finish, Input: 50mm2 (2),
Output: 10mm2 (4)
Single Input Power Distribution Blocks
• Designed for systems with up to 4 amplifiers
DB048
Diamond Plate Finish, Input: 50mm2 (1),
Output: 10mm2 (4)
DB448
Diamond Plate Finish, Input: 21mm2 (1),
Output: 10mm2 (4)
DBR44
Diamond Plate Finish, Input: Ring (1),
Output: 21mm2 (4)
DBR30
Diamond Plate Finish, Input: Ring (1),
Output: 50mm2 (3)
accessories
Inter-Lok® Power Rings®
• The industry standard. There is no more secure or higher-conductivity connection than the precision-machined, compression fit
Inter-Lok®
• Maintains gas-tight contact with every strand of wire
• Machined wrench flats allow easy tightening
• Machined external sculpting turns power delivery into a work of art
RTI0
Diamond Plate finish, 50mm2 (1/0 AWG), qty 2
RTI4
Diamond Plate finish, 21mm2 (4 AWG), qty 2
StreetWires cables and accessories, also known
in the car audio
world as the #1
product to use in
high end mobile
audio installations.
Just check out the
hottest show on
MTV, “Pimp My
Ride” and you’ll
see it’s all they
use: StreetWires.
Whether it be high
end interconnects
with our unique
Zero Noise technology,
power
cables that have
highest number of
copper strands per
square centimeter,
distribution blocks
available in all
sizes and arrays..,
we have it all in
the highest quality
and design. That’s
the reason why
StreetWires won
a CEA Award in
2004 for innovation
in design with the
CBR44 which combines distribution
and fuse block for
both positive and
negative in one
footprint : it’s a
world first . How
did we think of
this: because we
design the product
with the installer
in mind. Our team
of
StreetWires
engineers and designers have years
of installation experience. And this
can be seen with
each product.
Do you want to get
the best possible
picture from your
new DVD player?
Do you want to
hear all the music
the way the artist
originally
intended? Is maximizing
the performance
out of your amplifier and subwoofer important to
you? Of course
it is. That’s the
philosophy behind
StreetWires product design and
quality.
fuse holder
Waterproof In-Line Fuse Holders
• Hi-Amp fuse holders provide the ultimate
protection
• Four-Stage Watertight System utilizes four
O-rings for a perfect waterproof seal
• Impact-resistant clear housing protects fuse
while allowing easy fuse inspection
• Diamond plate finish with gold detail
FH0ANL ANL Fuse Holder, Diamond plate
finish, 50mm2 (1/0 AWG)
FH4ANL ANL Fuse Holder, Diamond plate
finish, 21mm2 (4 AWG)
FH4AGUB AGU Fuse holder, Diamond plate
finish, 21mm2 (4 AWG)
FH8AGUB AGU Fuse holder, Diamond plate
finish, 10mm2 (8 AWG)
Fuses - Maxi Fuses
• Color-coded for easy amperage identification
• See-through bodies for fuse inspection
MAX20
Yellow, 20 Amp, qty 2
MAX30
Green, 30 Amp, qty 2
MAX40
Orange, 40 Amp, qty 2
MAX50
Red, 50 Amp, qty 2
MAX60
Blue, 60 Amp, qty 2
MAX80
Clear, 80 Amp, qty 2
ANL Fuses
• For the highest-power mobile audio systems
• Integrated viewing window for easy fuse
inspection
• High-temperature, impact resistant polymer
bodies
• Screen-printed StreetWires logos and
amperage ratings
ANL60
Gold plated, 60 Amp, qty 1
ANL80
Gold plated, 80 Amp, qty 1
ANL100 Gold plated, 100 Amp, qty 1
ANL150 Gold plated, 150 Amp, qty 1
ANL200 Gold plated, 200 Amp, qty 1
ANL300 Gold plated, 300 Amp, qty 1
AGU Fuses
• High-temperature, impactresistant glass
• 24-karat Gold Plated
AGU10
Gold, 10 Amp, qty 4
AGU20
Gold, 20 Amp, qty 4
AGU30
Gold, 30 Amp, qty 4
AGU40
Gold, 40 Amp, qty 4
AGU50
Gold, 50 Amp, qty 4
AGU60
Gold, 60 Amp, qty 4
AGU70
Gold, 70 Amp, qty 4
AGU80
Gold, 80 Amp, qty 4
AFS Fuses
• Color-coded for easy amperage identification
See-through bodies for fuse inspection
AFS40
40 Amp, qty 2
AFS60
60 Amp, qty 2
AFS80
80 Amp, qty 2
AFS100
100 Amp, qty 2
AFS125
125 Amp, qty 2
AFS150
150 Amp, qty 2
capacitors
Power Station Capacitors
• The lowest E.S.R. and E.S.L. Ratings Achievable
• Digital Display models offer current sensing activation
and shut down, multiple display modes, audible warnings
and machined terminal posts
PSC241D Power Station Capacitor, 1 Farad, 20/24 V
with Digital Display
PSC201D Power Station Capacitor, 1 Farad, 16/20 V
with Digital Display
PSC201
Power Station Capacitor, 1 Farad, 16/20 V
Set Screw Power Rings®
• Precision-machined from billet high-conductivity brass
• Two step termination
• Heavy duty gold plated steel socket set screws
RTS0
Diamond Plate finish, 50mm2 (1/0 AWG), qty 2
RTS4
Diamond Plate finish, 21mm2 (4 AWG), qty 2
RTS8
Diamond Plate finish, 10mm2 (8 AWG), qty 2
Crimp Ring Terminals
• Pulse plated with pure 24-karat gold
• Includes red and black heat shrink
RTC08
Gold Plated, 8mm hole diam., 50mm2 (1/0 AWG), qty 2
RTC48
Gold Plated, 8mm hole diam., 21mm2 (4 AWG), qty 4
RTC88
Gold Plated, 8mm hole diam., 10mm2 (8 AWG), qty 4
RTC05
Gold Plated, 5mm hole diam., 50mm2 (1/0 AWG), qty 2
RTC45
Gold Plated, 5mm hole diam., 21mm2 (4 AWG), qty 4
RTC85
Gold Plated, 5mm hole diam., 10mm2 (8 AWG), qty 4
Spade Terminals
• Pulse-plated with pure 24-karat gold
• Includes protective PVC boots
• Available in peg packaging for slat wall display
• Available in bulk packaging for the installation bay
ST42
Spade Connector, 21mm2 (4AWG), qty 2
ST4100
Spade Connector, 21mm2 (4AWG), qty 100
ST84
Spade Connector, 10mm2 (8AWG), qty 4
ST8100
Spade Connector, 10mm2 (8AWG), qty 100
ST124
Spade Connector, 3,3mm2 (12AWG), qty 4
ST12100 Spade Connector, 3,3mm2 (12AWG), qty 100
ST164
Spade Connector, 1,5mm2 (16AWG), qty 4
ST16100 Spade Connector, 1,5mm2 (16AWG), qty 100
Ground Terminals
• Precision-machined from Forged Brass
• Two-step Termination
• Ultra-secure, Low-resistance Grounding
GT0
Ground Terminal 50mm2 (1/0 Gauge)
GT4
Ground Terminal 21mm2 (4 Gauge)
Battery Clamps
• All battery clamps are machined from forged
brass and have polarity markings
• Advanced clamping technique assures connection
integrity
• Impact Resistant Cover Included
BT1N
Battery Terminal, Negative, 1 screw
BT2N
Battery Terminal, Negative, 2 screws
BT1P
Battery Terminal, Positive, 1 screw
BT2P
Battery Terminal, Positive, 2 screws
BT2PF
Battery Terminal, Positive, 1 screw
with Built-in AFS Fuse Holder
Battery Posts
• All battery posts are machined from billet
brass and have polarity markings
BTGMT GM Truck Adaptor, qty 1
BTSML
Side Mount Adaptor (long), qty 1
BTSMS Side Mount Adaptor (short), qty 1
BTSTC
Side To Top Mount Converter, qty 1
Firewall Bushings
• Allows for a water-tight seal when power
wires pass through metal
• Locks securely as bushing is tightened
FWB0
Firewall Bushings, 50mm2 (1/0 AWG), qty 1
FWB4
Firewall Bushings, 21mm2 (4 AWG), qty 1
FWB8
Firewall Bushings, 10mm2 (8 AWG), qty 1
Clip-Its
• High-quality cable tie-downs for a neat installation
CL0
Dual Clip-Its, 50mm2 (1/0 AWG), 2 Pair
CL4
Dual Clip-Its, 21mm2 (4 AWG), 2 Pair
CL8
Dual Clip-Its, 10mm2 (8 AWG), 2 Pair
capacitors
Power Station Capacitors
• Brushed aluminium design
• BTR connectors
• Transparent holders included
CAP1
Power Capacitor, 1 Farad, 20 V
CAP1D
Power Capacitor, 1 Farad, 20 V with Digital Display
power kits
AK4
21mm2 Power Kit, contains 5m (16') red power cable, 1m (3') black
ground cable, 5m (16') RCA cable, 5m (16') blue remote cable, AGU fuse holder,
AGU fuse, accessories.
AK8
10mm2 Power Kit, contains 5m (16') red power cable, 1m (3') black
ground cable, 5m (16') RCA cable, 5m (16') blue remote cable, AGU fuse holder,
AGU fuse, accessories.
www.mtx-eu.com - www.mitekeurope.com - www.mtx.com