SOUND OF THUNDER
2006-2007
What Other Woofers have nightmares about
56cm (22")
58,5cm (23")
T9922-44
T9922-22
56cm (22”) JackHammer SQL SuperWoofer, Dual 4Ω (6000 W RMS)
56cm (22”) JackHammer SPL SuperWoofer, Dual 2Ω (6000 W RMS)
JackHammer is the most enormous, mindblowing, beast-of-a-subwoofer ever created. You
will literally not believe it until you see it. Standing
in at 59cm (23”) tall, 145Kg (320 pounds), and with
12000 watt peak music power handling, you will be
hard-pressed to find something that will get in the
ring with this heavyweight.
• Carbon fiber & glass fiber dust cap with aluminum honeycomb center
• Expanded polypropylene cone with mica filler for
reduced mass and increased stiffness
• FEA designed progressive roll spider with 6mm2
(10 AWG) integrated tinsel leads woven in to allow
for 6,4cm (2.5”) of linear cone movement one way
• 25Kg (900 ounce) strontium ferrite magnet with
extended magnetic field gap technology and aluminum shorting ring
• 16,5cm (6.5”) voice coil with a flat wound, longexcursion design incorporating 6,4cm (2.5”) of
X-max and 1mm2 (17 AWG) high temperature
aluminum wire
• Aluminum heatsink to maintain the optimum
voice-coil temperature
• 6000 RMS, 12000 peak music power
The JackHammer SuperWoofer represents excess in every way and this enormous subwoofer lives for high SPL and window shattering bass. But,
the T9922 is designed for sonic quality, and high
SPL, what we call SQL. JackHammers are shipped
in either the SPL mode, with dual 2 Ω voice coils,
or as the SQL model with dual 4 Ω voice coils.
A replaceable cone assembly is also available, for
switching between “every day” listening (SQL),
and competition (SPL). Unlike traditional replacement assemblies, the MTX Audio Thunder9922
replacement assembly can be accomplished without removing the speaker from the enclosure.
Fast, quick, and easy.
145Kg
6000Wrms
12000Wmax
FEATURES
FEATURES
ALDS Technology
✔
SPV Technology
✔
CET Technology
✔
Butyl Suspension
✔
Polypro/Carbon cone
✔
Cone in 1 piece
✔
Sealed Compatible
✔
Vented Compatible
✔
Stitched Cone/suspension ✔
MTX basket
✔
Aluminium basket
✔
StreetWires connectors
✔
X-max (1 way)
26mm
Power handling
12/10
ALDS Technology
✔
SPV Technology
✔
CET Technology
✔
Butyl Suspension
✔
Polypro/Carbon cone
✔
Cone in 1 piece
✔
Sealed Compatible
✔
Vented Compatible
✔
Stitched Cone/suspension ✔
MTX basket
✔
Aluminium basket
✔
StreetWires connectors
✔
X-max (1 way)
22mm
Power handling
10/10
A fine line between genius and insanity!
After the JackHammer, the T9500 series is the most beautiful, the most powerful (2000W) and the heaviest (28Kg)
SuperWoofer at MTX.
The T9500 incorporates 30 years of know how in subwoofer manufacturing, design and all the experience of a
team of 32 engineers.
Available in 38cm, 30cm and 25cm models, all are capable of handling between 750W and 1000W. How you
might ask: an X-max that reaches 26mm one way which
is twice as much as on a standard sub, 3 gigantic, high
grade magnets and a 10cm black anodized aluminium
former with a voice coil made from 220oC aluminium flat
wound ribbon wire.. Seeing it is astonishing, hearing it is
terrifying!
The basket is based on the world renowned SPL world
record setting RFL152. The StreetWires patented connectors are even more impressive. You’re able to connect
Size
T9510-04
T9510-44
T9512-04
T9512-44
T9515-04
T9515-44
25 cm
25 cm
30 cm
30 cm
38 cm
38 cm
Impedance
4Ω
2x4Ω
4Ω
2x4Ω
4Ω
2x4Ω
MAX
Power
1500W
1500W
2000W
2000W
2000W
2000W
RMS
Power
750W
750W
1000W
1000W
1000W
1000W
Sensitivity
85,9dB
87,5dB
87,4dB
91,0dB
90,4dB
93,8dB
Xmax
Fs
Magnet
26mm
26mm
26mm
26mm
26mm
26mm
39,4Hz
41,1Hz
34,3Hz
36,4Hz
30,6Hz
31,9Hz
5550 gr
5550 gr
7400 gr
7400 gr
7400 gr
7400 gr
Cooling SuspenResponse
Cone
system
sion
SPV
CET
39-150Hz Polypro/Carbon
SPV
CET
41-150Hz Polypro/Carbon
SPV
CET
34-150Hz Polypro/Carbon
SPV
CET
36-150Hz Polypro/Carbon
SPV
CET
30-150Hz Polypro/Carbon
SPV
CET
31-150Hz Polypro/Carbon
Size
T8510-04
T8510-44
T8512-04
T8512-44
T8515-04
T8515-44
25 cm
25 cm
30 cm
30 cm
38 cm
38 cm
Impedance
4Ω
2x4Ω
4Ω
2x4Ω
4Ω
2x4Ω
MAX
Power
1000W
1000W
1000W
1000W
1200W
1200W
RMS
Power
500W
500W
500W
500W
600W
600W
Sensitivity
86,9dB
90,4dB
89,8dB
92,3dB
92,0dB
93,5dB
Xmax
Fs
Magnet
22mm
22mm
22mm
22mm
22mm
22mm
41,4Hz
44,8Hz
36,3Hz
38,8Hz
35,4Hz
32,0Hz
4080 gr
4080 gr
4540 gr
4540 gr
5000 gr
5000 gr
Cooling
sytem
SPV
SPV
SPV
SPV
SPV
SPV
Suspension
CET
CET
CET
CET
CET
CET
Response
Depth
Polypro-Carbon 41-150Hz
Polypro-Carbon 44-150Hz
Polypro-Carbon 36-150Hz
Polypro-Carbon 38-150Hz
Polypro-Carbon 35-150Hz
Polypro-Carbon 32-150 Hz
Cone
18,8cm
18,8cm
19,7cm
19,7cm
22,7cm
22,7cm
Depth
23,6cm
23,6cm
24,7cm
24,7cm
27,3cm
27,3cm
four 10mm2 wires to each terminal.
The SledgeHammer is the best possible enclosure available to take full advantage of these SuperWoofers. We
tested all the possible configurations and we found the
T9500s deserve a SledgeHammer. If you don’t want our
boxes, the SLH* dimensions are available.
The T9500 is the most excessive sub under production.
Best way to describe these: HOLY SHIT!
T9510A
T9510D
T9512A
T9512D
T9515A
T9515D
T9510x2D
T9512x2D
T9515x2D
ImpedSize
ance
25 cm
4Ω
25 cm
2Ω
30 cm
4Ω
30 cm
2Ω
38 cm
4Ω
38 cm
2Ω
2x25 cm
2Ω
2x30 cm
2Ω
2x38 cm
2Ω
MAX
Power
1500W
1500W
2000W
2000W
2000W
2000W
3000W
4000W
4000W
RMS
Power
750W
750W
1000W
1000W
1000W
1000W
1500W
2000W
2000W
Dimensions
36,8x51,1x46,8 cm
36,8x51,1x46,8 cm
40,6x58,8x46,8 cm
40,6x58,8x46,8 cm
44,8x63,8x50,5 cm
44,8x63,8x50,5 cm
36,8x83,8x50,5 cm
40,6x90,3x50,5 cm
44,8x103,5x54,3 cm
The limits of imagination! The 8500 series
has set new standards. When it comes to its
construction it doesn’t get beefier or more
intimidating. When it comes to performance,
it becomes fearless. The 8500s are a must
to experience if you want to understand the
volume level and the amount of energy this
speaker is able to reach. The 8500’s basket is
built like a tank making it impossible to buckle
under pain regardless how powerful the amp
it’s connected to. The magnet assembly is so
large that you have to wonder if its bigger than
the actual cone on the 10 inch. The Xmax here
reaches 22mm one- way (44mm total). Once
we figure out how to make something bullet
proof, there’s no going back. The Streetwires
molded connectors are very handy when it comes to series or parallel configurations thanks
to their 10mm2 speaker cable capacity using
BTR screws. The T8500 are a nightmare for our
competitors.
Wanna get hit? Pounded? Slammed? Check out
the 8500 SledgeHammer enclosures: the most
attractive of the entire MTX range thanks to
their piano lacquer finish. They are all available
in single (4 Ohm) and dual voice coil (2 Ohm)
and the enclosures come in single 25 and 30cm
and double 25 and 30cm. They may blow more
than your mind!
Size
SLH-T8510A
SLH-T8510D
SLH-T8512A
SLH-T8512D
SLH-T8515A
SLH-T8515D
SLH-T8510x2A
SLH-T8510x2D
SLH-T8512x2A
SLH-T8512x2D
25 cm
25 cm
30 cm
30 cm
38 cm
38 cm
2x25 cm
2x25 cm
2x30 cm
2x30 cm
Impedance
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
MAX
Power
1000W
1000W
1000W
1000W
1200W
1200W
2000W
2000W
2000W
2000W
RMS
Power
500W
500W
500W
500W
600W
600W
1000W
1000W
1000W
1000W
Dimensions
36,8x51,0x46,0 cm
36,8x51,0x46,0 cm
40,6x58,8x46,0 cm
40,6x58,8x46,0 cm
44,8x63,7x49,9 cm
44,8x63,7x49,9 cm
36,8x83,8x49,9 cm
36,8x83,8x49,9 cm
36,8x83,8x49,9 cm
36,8x83,8x49,9 cm
Size
T7510-04
T7510-44
T7512-04
T7512-44
T7515-04
T7515-04
25 cm
25 cm
30 cm
30 cm
38 cm
38 cm
Impedance
4Ω
2x4Ω
4Ω
2x4Ω
4Ω
2x4Ω
Max
Power
800W
800W
800W
800W
800W
800W
RMS
Power
400W
400W
400W
400W
400W
400W
Sensitivity
88,5dB
90,6dB
89,4dB
92,1dB
91,9dB
95,0dB
Xmax
Fs
Magnet
17mm
17mm
17mm
17mm
17mm
17mm
47,0Hz
46,5Hz
45,2Hz
40,3Hz
28,6Hz
31,3Hz
2650 gr
2650 gr
2650 gr
2650 gr
3690 gr
3690 gr
The really serious stuff starts...here! We’re not talking about subwoofers anymore, we
would rather call these speakers SuperWoofers. Once you take notice of the die-cast
aluminium basket you begin to realize you’re in for something pretty awesome. The cone
excursion is exceptional: 17mm linear one way making it mandatory for the tinsel leads to
be woven into the spider! This SuperWoofer can move a lot of air. All our best technologies
are thrown at the 7500’s : ALDS keeps the voice coil from coming out of the gap, SPV cools
the voice coil and CET ffor longer wear on the rubber surround and suspension. We’ve
promised the world no less than the best products around and we’re delivering on that
promise spec by spec.
The enclosures also over perform with their progressive “slot” ports. This unique port
technology delivers amazing depth to the bass. The 7500 series SledgeHammers available
in single (4 Ohm) and dual voice coil (2 Ohm) and the enclosures come in single 25 and
30cm, double 25 and 30cm and a triple 25cm. Now that’s a heck of a lot of enclosures to
choose from.
Cooling
system
SPV
SPV
SPV
SPV
SPV
SPV
Suspension
CET
CET
CET
CET
CET
CET
FEATURES
ALDS Technology
✔
SPV Technology
✔
CET Technology
Butyl Suspension
✔
Polypro/Carbon cone
✔
Cone in 1 piece
✔
Sealed Compatible
✔
Vented Compatible
✔
Stitched Cone/suspension ✔
MTX basket
✔
Aluminium basket
StreetWires connectors
X-max (1 way)
14mm
Power handling
8/10
Cone
Response
Depth
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
47-150Hz
46-150Hz
45-150Hz
40-150Hz
28-150Hz
31-150Hz
17,0cm
17,0cm
18,3cm
18,3cm
20,7cm
20,7cm
Size
SLH-T7510A
SLH-T7510D
SLH-T7512A
SLH-T7512D
SLH-T7510x2A
SLH-T7510x2D
SLH-T7512x2A
SLH-T7512x2D
SLH-T7510x3A
SLH-T7510x3D
FEATURES
ALDS Technology
✔
SPV Technology
✔
CET Technology
✔
Butyl Suspension
✔
Polypro/Carbon cone
✔
Cone in 1 piece
✔
Sealed Compatible
✔
Vented Compatible
✔
Stitched Cone/suspension ✔
MTX basket
✔
Aluminium basket
✔
StreetWires connectors
X-max (1 way)
17mm
Power handling
9/10
25 cm
25 cm
30 cm
30 cm
2x25cm
2x25cm
2x30 cm
2x30 cm
3x25cm
3x25cm
Impedance
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
Max
Power
800W
800W
800W
800W
1600W
1600W
1600W
1600W
2400W
2400W
RMS
Power
400W
400W
400W
400W
800W
800W
800W
800W
1200W
1200W
Size
T5508-04
T5508-44
T5510-04
T5510-44
T5512-04
T5512-44
T5515-04
T5515-44
Dimensions
35,6x49,0x40,6 cm
35,6x49,0x40,6 cm
36,2x56,5x43,2 cm
36,2x56,5x43,2 cm
35,6x76,8x47,0 cm
35,6x76,8x47,0 cm
36,2x87,0x45,7 cm
36,2x87,0x45,7 cm
38,7x89,5x43,2 cm
38,7x89,5x43,2 cm
20 cm
20 cm
25 cm
25 cm
30 cm
30 cm
38 cm
38 cm
Impe
dance
4Ω
2x4Ω
4Ω
2x4Ω
4Ω
2x4Ω
4Ω
2x4Ω
Max
Power
400W
400W
600W
600W
600W
600W
600W
600W
RMS
Power
200W
200W
300W
300W
300W
300W
300W
300W
Sensitivity
88,8dB
91,4dB
88,2dB
90,9dB
89,8dB
92,9dB
90,8dB
93,6dB
Xmax
Fs
14mm
14mm
14mm
14mm
14mm
14mm
14mm
14mm
41,1Hz
42,3Hz
35,3Hz
35,6Hz
29,2Hz
29,9Hz
21,3Hz
21,7Hz
The evolution of the 5500 is truly worth talking about. The magnetic assembly is twice as
big as the series it replaces and the finish is magnificent.The cone is made of carbon-reinforced polypropylene and covered with a layer of aluminium. It is a one-piece design, which
adds to the rigidity and takes care of any issues with the dust cap. The Xmax on this sub
has made a big leap forward: 14mm one-way ( the more air you move the more bass you’ll
get). The cooling system is literally oversized: technologies on board are the ALDS and the
SPV. To assure added reliability, the tinsel leads are wound into the spider thus allowing
for extreme excursions without risk of over stretching. Proof again the engineers weren’t
slacking off. Regarding the overall design, they have out done themselves. Simply put this
sub looks awesome.
All 5500 series SledgeHammer come in single (4 Ohm) and dual voice coil (2 Ohm) and the
enclosures are available as single 25 and 30cm, double 25 and 30cm and a triple 25cm (our
personal favorite). The front baffle on a Sledge is 40mm thick. A few years back, MTX’s
slogan was “Serious about Sound”. Now it could be “Serious about the Build”.
Magnet Cooling
structure system
1150 gr
SPV
1150 gr
SPV
1700 gr
SPV
1700 gr
SPV
1980 gr
SPV
1980 gr
SPV
2300 gr
SPV
2300 gr
SPV
Cone
Response
Depth
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
41-150Hz
42-150Hz
35-150Hz
35-150Hz
29-150Hz
29-150Hz
21-150Hz
21-150Hz
12,6cm
12,6cm
15,6cm
15,6cm
16,9cm
16,9cm
19,2cm
19,2cm
Impedance
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
Max
Power
600W
600W
600W
600W
1200W
1200W
1200W
1200W
1800W
1800W
Size
T5510A
T5510D
T5512A
T5512D
T5510x2A
T5510x2D
T5512x2A
T5512x2D
T5510x3A
T5510x3D
25 cm
25 cm
30 cm
30 cm
2x25 cm
2x25 cm
2x30 cm
2x30 cm
3x25 cm
3x25 cm
RMS
Power
300W
300W
300W
300W
600W
600W
600W
600W
900W
900W
Dimensions
35,6x49,0x40,6 cm
35,6x49,0x40,6 cm
36,2x56,5x43,2 cm
36,2x56,5x43,2 cm
35,6x76,8x47,0 cm
35,6x76,8x47,0 cm
36,2x87,0x45,7 cm
36,2x87,0x45,7 cm
36,2x87,0x45,7 cm
36,2x87,0x45,7 cm
Size
T4508-04
T4510-04
T4510-44
T4512-04
T4512-44
T4515-04
T4515-44
20 cm
25 cm
25 cm
30 cm
30 cm
38 cm
38 cm
Impedance
4Ω
4Ω
2x4Ω
4Ω
2x4Ω
4Ω
2x4Ω
Max
Power
200W
450W
450W
450W
450W
500W
500W
RMS
Power
100W
225W
225W
225W
225W
250W
250W
Sensitivity
85,6dB
87,6dB
90,4dB
89,8dB
92,1dB
89,3dB
91,4dB
The Thunder4500 subs provide you with bass that goes way beyond the
price you paid for it. Pair them up with one of our Thunder amplifiers
and these woofers pump out as much volume as you can handle.
T4500s come in 38cm, 30cm, 25cm and 20cm and feature Asymmetrical
Linear Drive System, Spider Plateau Venting technology, tinsel leads
woven into the spider and mated to heavy duty chrome push speaker
terminals. Plus we’ve added a 220oC copper voice coil wound on an
Apical voice coil former for extremely reliable, high power handling.
The strontium ferrite magnet yields a highly efficient speaker meaning
it makes better use of your amplifier power.
Look for T4500 High Performance subwoofers in our exsclusive and
definitely impressive SledgeHammer enclosures. Availalble in single,
dual or triple woofer configurations.
Xmax
Fs
5,4mm
9,4mm
9,4mm
9,4mm
9,4mm
9,4mm
9,4mm
39,8Hz
35,4Hz
39,1Hz
29,9Hz
29,2Hz
22,6Hz
24,5Hz
Magnet Cooling
Structure system
450gr
SPV
850gr
SPV
850gr
SPV
1000gr
SPV
1000gr
SPV
1417gr
SPV
1417gr
SPV
Woofer(s)
SLH-T4510A
SLH-T4512A
SLH-T4515A
SLH-T4510x2A
SLH-T4510x2D
SLH-T4512x2A
SLH-T4512x2D
SLH-T4510x3A
SLH-T4510x3D
SLH-T4510-200
SLH-T4512-200
SLH-T4510x2-200
SLH-T4512x2-200
SLH-T4510x3-200
25 cm
30 cm
38 cm
2x25 cm
2x25 cm
2x30 cm
2x30 cm
3x25 cm
3x25 cm
25 cm
30 cm
2x25 cm
2x30 cm
3x25 cm
FEATURES
FEATURES
ALDS Technology
✔
SPV Technology
✔
CET Technology
Butyl Suspension
Polypro/Carbon cone
✔
Cone in 1 piece
✔
Sealed Compatible
✔
Vented Compatible
✔
Stitched Cone/suspension ✔
MTX basket
✔
Aluminium basket
StreetWires connectors
X-max (1 way)
9,4mm
Power handling
7/10
ALDS Technology
✔
SPV Technology
✔
CET Technology
Butyl Suspension
✔
Rubber Gasket
✔
Polypro/Alu cone
✔
Magnet Cover
✔
Cone in 1 piece
✔
Sealed Compatible
✔
Vented Compatible
✔
Stitched Cone/suspension
MTX basket
✔
Aluminium basket
StreetWires connectors
X-max (1 way)
9,4mm
Power handling
7,5/10
Cone
Response
Depth
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
39-150Hz
35-150Hz
39-150Hz
29-150Hz
29-150Hz
22-150Hz
21-150Hz
9,1cm
12,2cm
12,2cm
13,5cm
13,5cm
16,8cm
16,8cm
Impedance
4Ω
4Ω
4Ω
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
Max
Power
450 W
450 W
450 W
900 W
900 W
900 W
900 W
1350 W
1350 W
RMS
Built in
EBC
Dimensions
Power ClassD amp Remote
225 W
35,6x49,0x38,7 cm
225 W
36,2x56,5x41,3 cm
225 W
42,5x59,1x47,6 cm
450 W
35,6x76,8x45,1 cm
450 W
35,6x76,8x45,1 cm
450 W
36,2x87,0x43,8 cm
450 W
36,2x87,0x43,8 cm
675 W
38,7x89,5x41,3 cm
675 W
38,7x89,5x41,3 cm
200W
Yes
35,6x49,0x38,7 cm
200W
Yes
36,2x56,5x41,3 cm
200W
Yes
35,6x76,8x45,1 cm
200W
Yes
36,2x87,0x43,8 cm
200W
Yes
38,7x89,5x41,3 cm
Size
XT10-04
XT12-04
XT12-44
25 cm
30 cm
30 cm
Impedance
4Ω
4Ω
4Ω+4Ω
Max
Power
750W
750W
750W
RMS
Power
250W
250W
250W
Sensitivity
89,7dB
91,4dB
92,8dB
Xmax
Fs
9,5mm
9,5mm
9,5mm
39,0Hz
33,0Hz
34,5Hz
Cooling
system
SPV
SPV
SPV
Cone
Response
Depth
Polypro-Alu
Polypro-Alu
Polypro-Alu
32-200Hz
33-200Hz
34-200Hz
12,4cm
13,9cm
13,9cm
XThunder subs, Bass
from a new level !
Xtreme powerhandling upto 750W Max.
Unbelievable Xcursion 9,4mm one way.
Xclusive technologies
like ALDS, SPV and
spider with interlaced
tinsel leads. Next to a
high temperature aluminium voice coil and
oversized motorstructure, original MTX designed steel basket,
expanded polypropylene cone with aluminium finnish, rubber surround, rubber
gasket and magnet
cover with embossed
MTX logo's. XThunder subwoofers
feature the ”X” from
Xtreme, Xcitement,
Xclusive, Xtraordanary... XThunder subs
set a new standard
for entry level subwoofers: Level X!
These subs can be
used with any type of
enclosure sealed or
ported. Ma”X” performance is garanteed when one of the
recommended Level
X enclosure designs
is used.
4 to 1 - 1st time in the world
They never stop. We’re talking about the engineers at MTX. For the first time, a 4-channel
amplifier can transform itself into a Mono Block. Yes, you read it correctly, a real Mono Block.
It can also first become a 3 and 2 channel amplifier. But a 4-channel amp that can convert
itself into a Mono Block has never been done before. Thank you, gentlemen in the R&D department. This marvellous ingenuity will allow the user to modify his system design as often as
he chooses, regardless how demanding the configuration. Simply amazing
New Connectors
They’re gorgeous. Introduce the bare wire
of the cable directly into the power or speaker connectors, turn the BTR screw and
you’re on. It’s clean, quick, simple and safe.
There’s even a small cover for the top of the
BTR screws once you’re finished tightening
them. All the connectors are on the same
side. It’s easier and more stealth looking.
The big amps even have an additional input
connection for the capacitor. Perfect score
on the new amp connectors.
Power specifications find
newly guaranteed norms
You’re finally going to be able
to make heads and tails out
of the often-exaggerated
specs from other brands in
the industry. MTX has been
at the forefront of leading the
industry towards an agreed
upon set of guidelines to
measure actual power outputs
of car hifi amplifiers. An independent laboratory selected by the
CEA (Consumer Electronics Association) will be responsible for
conducting the strict allocation of norms to those brands that
choose to have their amplifier specifications measured and
made public in this manner. All measuring will follow a rigorous
set of parameters agreed upon by the CEA board and this logo
will attest to this. We at MTX had been waiting along time for this
to happen. Who should we thank?
TA92001: 3000W CEA
3000W is the CEA approved output power
achievable by the most powerful ClassD Mono Block from the
new range of amplifiers at MTX. It’s actually the most powerful
amplifier MTX has ever designed in the company’s history. And
these are CEA measured Watts. To give you an idea of what
this represents: an amp like the TA1501D or theTA81000 put
out 1200W CEA. For us mere mortals, these amps were able to
reach between 1500 and 2000W RMS. Pretty tough standards
the CEA came up with... Two features allow you to optimise the
bridging of two TA92001: the fully adjustable phase from 0 to
180 and a bypass for all pre-amplifier functions. As we said,
those engineers never stop.
Are you ready for the future in car audio? After years
of continuous evolution, the MTX amplifier range
has been completely transformed. The amount and
level of new technologies, of ingenuity, of power and
design is lightyears ahead. Even the engineers from
NASA are speechless!
No other brand in the industry has the freedom to do
something as radical as this. The first eye grabber is
the new design of the amplifiers. A technical quest:
the amp is now wrapped in a heat sink made entirely
out of aluminium. All of the connections are newly
located on one side of the amp for wiring ease, while
all adjustments are made from the top of the amp,
making tweaking and tuning easier than before (especially considering the number of new features on
the amps). If you take a look at the chart you’ll notice
the impressive number of adjustments: 12-18-24dB/
oct. active crossovers, adjustable subsonic filter,
parametric or quasi-parametric equalizer, separate
AMPS
New Technology “Prizm EFX”
All the new MTX amps are equipped with it. With one turn of a
screw, this new technology allows the user
to adjust the colour illumination of the control panel on the amplifier. Virtually all colours are available thus allowing you to match
the rest of the colour schemes in the installation or the car. If you
have difficulty choosing one colour, position the Prizm EFX on
stroboscopic. All the colours in the rainbow are displayed to the
beat of the music. Too cool. If you still can’t decide then simply put
it on red: the colour of MTX.
TA92001
TA81001
TA7801
TA5601
TA4501
TA3401
TA2301
TA91002
TA8502
TA7402
TA5302
TA4252
TA3202
TA7804
TA3404
Channel
Class
1D
1D
1D
1D
1D
1D
1D
2 AB
2 AB
2 AB
2 AB
2 AB
2 AB
4 AB
4 AB
Power
1Ω CEA
1x3000W
1x1500W
1x1200W
2x750W
2x375W
2x300W
4x200W
4x100W
Power
2Ω CEA
1x2000W
1x1000W
1x800W
1x600W
1x500W
1x400W
1x300W
2x500W
2x250W
2x200W
2x150W
2x125W
2x100W
4x200W
4x100W
Power
4Ω CEA
1x1000W
1x500W
1x400W
1x300W
1x250W
1x200W
1x150W
2x250W
2x125W
2x100W
2x75W
2x63W
2x50W
4x100W
4x50W
Bridged
Power CEA
1x1500W
1x750W
1x600W
1x300W
1x250W
1x200W
2x400W
2x200W
Low-pass
x-over
24dB/oct
24dB/oct
24dB/oct
24dB/oct
24dB/oct
24dB/oct
24dB/oct
24dB/oct
24dB/oct
24dB/oct
24dB/oct
24dB/oct
24dB/oct
24dB/oct
24dB/oct
High-pass
x-over
24dB/oct
24dB/oct
12dB/oct
12dB/oct
12dB/oct
12dB/oct
12dB/oct
12dB/oct
Subsonic
filter
20 to 50Hz
20 to 50Hz
30Hz
30Hz
30Hz
30Hz
X-over
Frequency
40-200Hz
40-200Hz
40-200Hz
40-200Hz
40-200Hz
40-200Hz
80 or 120Hz
40-350Hz
40-350Hz
40-350Hz
40-350Hz
85Hz
85Hz
40-350Hz
40-350Hz
EBC
EQ
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Prizm High
EFX Level
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
gain adjustments, colour control...it’s a busy place. A
massive amount of new technology and innovation
has been incorporated into the new range. And everything is under control. The new ventilation system
is thermal regulated and allows for great installation
flexibility. No matter what position, the amp will
always be kept cool. EBC bass remote control now
comes stock. The evolution in the power-rating department will still all power hunger with the biggest
amp capable of delivering 3.000W “CEA” RMS... there are going to be some very hot voice coils around
this year. And for the artistically inclined, there is the
PRIZM EFX. The MTX engineers are helping us to
reach the rainbow at the touch of a button. The two
4 channel amps will offer a world premier, breaking
all the rules in amplifier functionality and use. On the
matter of sound quality, these are the best amps MTX
has ever come out with.
50% more MOS-FETs
for the same power
rating
The new MTX amps
offer 50% more MOSFETs at the power
supply and VFETs at the
output stage compared to the
previous line-up (though few
fans of MTX amps ever complained about this being an issue to
achieve huge power outputs).
Remote Subwoofer
control: EBC
It’s now included
with every amp
except the smallest
one, the TA3202.
The EBC allows you to adjust the sub level from the
driver’s seat. Very handy
as every music recording
seems to have a different
sub bass level.
Cooling System “XTC”
How long do you think it takes for the average car
hifi amp to warm up and reach its peak in musicality?
Some take up to 30 minutes and that’s too long. With
the new cooling system “XTC” from Xtant Technology Cooling the aluminium heat sink inside the new
MTX 2005 amplifiers is reduced in size to allow for a
quicker rise in temperature. Then, silent fans regulate
the temperature accordingly to within a couple of degrees. The air intake is located at the top of the amp.
Fresh air is then propelled through thin, sandwiched
layers of aluminium upon which all the MOS-FETS are
fastened thus optimizing the thermal effect. It is amazingly efficient
and easy to control. The transformers
as well as the class-D output filter are located at the other end of the sandwiched layers meaning they too are exposed to this air-cooling. The new
amps are designed both for cold climate areas where
you want the heat sink and the transistors to heat up
quickly and for warmer climates where keeping them
from overheating are the prime concern.
Like never before Retro is Cool!
Old Skool is Hot!
Back to the roots or should it be back
to the future, classic amps addapted to
meet new standards. TC originally stands
for Classic Thunder.
Classic Thunder amps improved and revamped for the New Skool market.
Improved using new Technologies as: Nchannel VFET output stages, Addaptive
Class D, Smart Engage etc. With CEA2006
TC8001
TC6001
TC4001
TC3001
TC4002
TC3002
TC2002
TC6004
TC4004
Nbr of
Channel
1
1
1
1
2
2
2
4
4
Power
2Ω CEA
1x800W
1x600W
1x400W
1x300W
2x200W
2x150W
2x100W
4x150W
4x100w
Power
4Ω CEA
1x400W
1x300W
1x200W
1x150W
2x100W
2x75W
2x50W
4x75W
4x50W
certification when it comes to garanteed
output power. The amps have a full alluminium design with Cool, Classic, Retro
look. A hidden single Hi intensity LED
gives a special red glow through the middle of the heatsink when switched on.
To meet the needs of the demanding
car audio enthousiasts of this millenium
the TC amps are loaded with: 12dB/oct
variable Hi pass and 24dB/oct variable
Low pass x-overs, Switchable Subsonic
Power
4Ω bridged
1x400W
1x300W
1x200W
2x300W
2x200W
Low-pass
X-over
24dB/oct
24dB/oct
24dB/oct
24dB/oct
12dB/oct
12dB/oct
12dB/oct
12dB/oct
12dB/oct
High-pass
X-over
Subsonic
Subsonic
Subsonic
Subsonic
12dB/oct
12dB/oct
12dB/oct
12dB/oct
12dB/oct
X-over
frequency
40 to 200Hz
40 to 200Hz
40 to 200Hz
40 to 200Hz
40 to 350Hz
40 to 350Hz
40 to 350Hz
40 to 350Hz
40 to 350Hz
EBC
remote
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Bass
Boost
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
High
Level
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
filter (on Class D amps), Thunder EQ and
each amp comes standard with an External
Bass Control (EBC). The power ratings on
these amps will literally blow you through
your roof and set you on a Car audio orbit
around the globe with ratings from 300W
to 2400W Total Output Power. MTX Thunder
TC, Thunder with a past.
The ”X” in Xthunder amplifiers
”X”clusive 100% full aluminium design with high quality BTR
connection terminals. ”X”traordinary cool chrome logo in the
middle of the amp with red indication LED. ”X”treme power
over 3500W for the X3000D CEA2006 certified from the fully
Mosfet designed power supply and finalstage using IRF highest quality Mosfets. ”X”cessive onboard X-over adjustable
from 40Hz to 8000Hz on the Class AB models and a variable
Subsonic filter on the Class D models. ”X”ternal Bass control
X3000D
X1000D
X500D
X702
X502
X704
X504
Nbr of
CEA Power @14,4 volts
channel
1Ω
2Ω
4Ω
Bridged 4Ω
1
1x3000W 1x2000W 1x1000W
1
1x1000W 1x600W
1
1x500W 1x350W
2
2x105W
2x70W
1x210W
2
2x90W
2x50W
1x180W
4
4x105W
4x70W
2x210W
4
4x80W
4x50W
2x160W
(EBC) is incorporated with each Class D amp. ”X”otic and
normal head units can all be connected to these amps either
via the RCA connec”X”ions with a sensitivity of 200mV to 5V
or via the High level inputs. ...But what about the sound? Well
lets just say it is... ”X”quisite!
With a XXXXXXX rating MTX XThunder amplifiers are not
suited for kids who need parental guidance. XThunder amplifiers stand for Xtreme Xcitement in Car Audio.
Low-pass
24dB/oct
24dB/oct
24dB/oct
24dB/oct
24dB/oct
24dB/oct
24dB/oct
X-over
High-pass
subsonic
subsonic
subsonic
12dB/oct
12dB/oct
12dB/oct
12dB/oct
Band-pass
Yes
Yes
Yes
Yes
X-over
frequency
40 to 200Hz
40 to 200Hz
40 to 200Hz
40 to 8000Hz
40 to 8000Hz
40 to 8000Hz
40 to 8000Hz
EBC
Remote
Yes
Yes
Yes
High
level
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Thunder Axe High End Component
systems have a larger X max than all
other competitors. Featuring glass fiber
woofer cones with aluminum deposition
and a 25mm Teteron® tweeter, Thunder
Axe High End Components were designed for superior imaging, detail, sound
quality, and dynamic range. The specifically designed crossover distributes
frequencies properly to maximize the
musical performance of each driver. Engineered with superior components, the
2-way, bi-ampable, 18dB/octave crossover network is designed for accurate
imaging and sound quality. They have
been optimized for off-axis or on-axis
listening and include a 5 level tunable
tweeter network for optimum imaging
regardless of tweeter placement or positioning. In addition, the woofer has a
0°, 30°, and 60° off-axis compensation.
Said Dan Roemer, VP of Acoustical Engineering, “These components are the
best speakers MTX has ever released.
These are speakers with the versatility, performance, and reliability that
separate the best speakers from those
that are just average. Any true audiophile will appreciate these products.”
With the addition of the Thunder Axe
High-End Component line, MTX offers
high performance, installation-friendly
solutions. Whether you are upgrading
from factory speakers or you are an
audiophile looking to build the ultimate
mobile sound stage, Thunder Axe HighEnd Components deliver the ultimate in
sound quality. Here are the specs :
• Glass Fiber Cone material with Aluminum Deposition provides unmatched
musical accuracy and extended low
frequency response
• 25mm Teteron Dome Tweeter provides
ultra-wide frequency response to blend
perfectly with the mid/woofer
• 2-way Separate Crossover 18dB/oct
that is engineered with superior components
• 5 Adjustable Tweeter Levels to provide
the best linear response regardless of
tweeter positioning and placement
• Large 1.5" voice coil
• Up to 4,8mm (!) Xmax
• 3 Position Woofer off-axis compensation (0°, 30°, 60°) provides exceptional
dynamics and detail while bringing
the music up front and center, as if
the listener is in the front row of a live
performance
• Bi-amp capability
• Add an additional 6-1/2” driver and
crossover
package (TXC6.0) to create a 3-way
solution,
creating improved detail, imaging and
sound dynamics
• Die-cast aluminum basket
• Shallow mount design
TXC6.1
TXC6.0
TXC5.1
TXC4.1
TXC.1
Size
Type
16,5 cm
16,5 cm
13 cm
10 cm
25 mm
Compo 2 way
Kick Woofer
Compo 2 way
Compo 2 way
Tweeter
Impedance
4Ω
4Ω
4Ω
4Ω
4Ω
Peak
Power
300W
300W
250W
200W
150W
RMS
Power
150W
150W
125W
100W
75W
Sensitivity
Response
2V 1m
91dB
43-25kHz
91dB
43-250Hz
90dB
45-25kHz
88dB
50-25kHz
91dB
3,5-25kHz
Cone
Grills
Fiberglass
Fiberglass
Fiberglass
Fiberglass
Tetron
Yes
Yes
Yes
Yes
Yes
YOU CANNOT HAVE THUNDER WITHOUT THE LIGHTNING!
The new standard for musical
pleasure towards a caraudio excellence.
Now has the lightning added with
a striking new look in the form of a
MTX designed new grille.
THS seperates and THX axials are
specificaly developed for the european market featuring:
- An original MTX designed strong
steel Euro DIN basket. Means it looks
great and fits all cars.
- A very strong motor structure to
have optimum control and to maximize the powerhandling, up to 320W
for the THX693, protected by a rubber magnet cover with embossed
MTX logo's.
- An injected polypropylene cone
with aluminium finnish mostly found
on speakers costing up to 3x more.
It sounds breath taking and looks
awesome.
- A rubber surround ensures a very
flexible yet UV resistant and durable
suspension.
- 2,5cm diameter High temperature
aluminium voice coil to maximize
powerhandling.
- THX axials have tweeters with MTX
original special designed face plates
to have the best sound dispersion
possible.
- THX502 tweeter can even be turned
360 degrees. On the THX603 and
THX653 an extra supertweeter is added to create a 3-way speaker.
- The THX693 has a special designed
mid adjacent to the tweeter to create
a crystal clear sounding 6”x9” 3-way
speaker.
- THS separates use a 19mm Silk
dome tweeter and High Quality xover with tweeter protection circuit.
- THS mids have a CNC machined
Solid aluminium phase plug to get
exactly the right shaped phase plug,
crucial for the overall sound of the
speaker.
So put some Thunder in these
speakers by teaming them up with
an MTX amplifier and you will be
Thunderstruck after an encounter
with the new THS separates or THX
axials from MTX!
THX693
THX653
THX502
THX402
THS652
THS502
THS19T
Size
Type
15x23cm
16,5cm
13cm
10cm
16,5cm
13cm
19mm
Coax 3 way
Coax 3 way
Coax 2 way
Coax 2 way
Compo 2 way
Compo 2 way
Tweeter
Impedance
4Ω
4Ω
4Ω
4Ω
4Ω
4Ω
4Ω
Peak
Power
320W
260W
220W
180W
260W
220W
260W
RMS
Power
80W
65W
55W
45W
65W
55W
65W
Sensitivity
2,83V 1m
93,0dB
92,0dB
91,5dB
90,5dB
92,0dB
91,5dB
92,0dB
Response
Cone
Grills
38-22000Hz
60-22000Hz
65-22000Hz
75-22000Hz
60-25000Hz
65-25000Hz
2,5-25kHz
Injec. Poly.
Injec. Poly.
Injec. Poly.
Injec. Poly.
Injec. Poly.
Injec. Poly.
Silk
Yes
Yes
Yes
Yes
Yes
Yes
Yes
RoadThunder loaded enclosures.
Enclosures designed and
build by MTX and loaded
with RoadThunder subwoofers. Not only do they
sound great, they also look
great and take up as less
trunkspace as possible.
Finished with very durable grey carpet that
compliments the great
looks of the subwoofers like: the red basket, the black mica
filled polypropylene
cone with the MTX
AUDIO logo in the
middle and the
double row of red
stitching. Designed
with a triangle shape these
enclosures will match perfectly
with the back of the backseat taking
up as less trunkspace as possible. Designed for the RoadThunder subwoofers ensures that these RoadThunder
loaded enclosures will deliver deep
and loud bass. RoadThunder loaded enclosures are availlable in single 25 and
30cm, dual 30cm and tripple 25cm.
THUNDER FROM A DIFFERENT LEVEL, RATED X!
XThunder axials are the new standard for musical pleasure from factory locations.
With special MTX designed speaker
grills and all mounting materials included, specificaly developed for the
european market featuring:
• An original MTX basket. A MTX designed strong steel Euro DIN basket.
Means it looks great and fits all cars.
• Oversized magnet. A very strong
motor structure to have optimum
control and to maximize the powerhandling, up to 320W for the XT693.
• Injected polypropylene cone with
rubber surround.
• The rubber surround ensures a very
flexible yet UV resistant and durable
suspension.
• An injected polypropylene cone is
mostly found on speakers costing up
to 3x more.
The sound is incredible coming from
this cone.
• High temperature aluminium voice
coil with kapton former.
• To maximize the powerhandling.
All XT models have tweeters with
MTX original special designed face
plates to have the best sound dispersion possible. The XT603, XT653 and
XT573 an extra supertweeter is added to create a 3-way speaker. The
XT693 and XT803 have a special designed midrange next to the tweeter
to form superb sounding 6”x9” and 8”
3-way speakers
XT803
XT693
XT573
XT653
XT502
XT402
Size
Type
20cm
15x23cm
13x18cm
16,5cm
13cm
10cm
Coax 3 way
Coax 3 way
Coax 3 way
Coax 3 way
Coax 2 way
Coax 2 way
Impedance
4Ω
4Ω
4Ω
4Ω
4Ω
4Ω
Peak
Power
320W
320W
260W
260W
220W
180W
RMS
Power
80W
80W
65W
65W
55W
45W
Sensitivity
2,83V 1m
93,5dB
93,0dB
92,5dB
92,0dB
91,5dB
90,5dB
Response
Cone
Grills
38-22000Hz
36-22000Hz
49-22000Hz
55-22000Hz
60-22000Hz
70-22000Hz
Injec. Poly.
Injec. Poly.
Injec. Poly.
Injec. Poly.
Injec. Poly.
Injec. Poly.
Yes
Yes
Yes
Yes
Yes
Yes
Woofer(s)
RT10
RT12
RT12x2
RT10x3
AMPLIFIED
Woofer(s)
RT10-200
RT12-200
RT10x2-200
RT12x2-200
25 cm
30 cm
2x25 cm
2x30 cm
RMS
Power
200 W
200 W
200 W
200 W
ClassD
Amp
yes
yes
yes
yes
EBC
remote
yes
yes
yes
yes
Dimensions
31x30x40cm
36x40x46cm
31x70x40cm
36x77x45cm
25 cm
30 cm
2 x 30 cm
3 x 25 cm
Max
Power
400 W
400 W
800 W
1200 W
RMS ImpedPower ance
200 W
4Ω
200 W
4Ω
400 W
4Ω
600 W
4Ω
Dimensions
31x30x40cm
36x40x46cm
36x77x45cm
34x89x37cm
Coustic engineers have created a revolutionary new
design that gives a whole new adrenaline rush to any
street enthusiast. It starts with the sleek, extruded
aluminum. The heat sinks are purposely oversized to
optimize heat dissipation and now come in anodized
light grey with the ends wrapped in carbon. Each amp
comes stock with a wire remote for optimal bass control. The speaker inputs are very easy to work with as
you now screw the cables straight into the connector:
more solid and better conductivity. All you need is a
BTR driver and you’re set. There are other developments that have taken place inside the amp. Intelli-
Sense allows for auto turn on for easy installation with
factory radios. The output stages of the new amps are
equipped with Vfets (a special type of Mosfet). They
are more dynamic and quicker in response. The four
new ClassD amplifiers are even more efficient: they’re
optimised to operate at 2 Ohm, that’s two 4 Ohm subs in
parallel. With over 85% efficiency with the ClassD you
have more power with less current demand.
The amp doesn’t even get hot, proof there’s no loss.
The 2005 Coustic amp range is made up of 10 models.
The specs can be found on the following chart.
AMPLIFIERS
C400
C100
C200
Nbr of
Channel
1
2
4
2Ω
1x400W
2x85W
4x75W
RMS CEA POWER
4Ω
Bridged
1x250W
2x50W
1x170W
4x50W
2x150W
Low-Pass
24dB/oct
24dB/oct
24dB/oct
X-Over
High-Pass
subsonic
12dB/oct
12dB/oct
Band-Pass
Yes
Yes
X-over
Frequency
40 to 200Hz
40 to 8000Hz
40 to 8000Hz
EBC
Remote
Yes
High
level
Yes
Yes
Yes
SPEAKERS
SUBWOOFERS
Size
CX10-04
CX12-04
25 cm
30 cm
Impedance
4Ω
4Ω
Max
Power
675W
675W
RMS
Power
225W
225W
Sensitivity
90,7dB
92,4dB
Cooling
Xmax
Fs
system
9,4mm 37,0Hz
SPV
9,4mm 33,1Hz
SPV
Cone
Response
Depth
Polypro
Polypro
30-200Hz
25-200Hz
12,5cm
14,0cm
CX803
CX693
CX573
CX653
CX502
CX402
CS652
CS502
Size
Type
20cm
15x23cm
13x18cm
16,5cm
13cm
10cm
16,5cm
13cm
Coax 3 way
Coax 3 way
Coax 3 way
Coax 3 way
Coax 2 way
Coax 2 way
Compo 2 way
Compo 2 way
Impedance
4Ω
4Ω
4Ω
4Ω
4Ω
4Ω
4Ω
4Ω
Peak
Power
300W
300W
260W
240W
200W
160W
240W
200W
RMS
Power
75W
75W
65W
60W
50W
40W
60W
50W
Sensitivity
2,83V 1m
93,5dB
93,0dB
92,5dB
92,0dB
91,5dB
90,5dB
92,5dB
92,0dB
Response
Cone
Grills
36-22000Hz
34-22000Hz
44-22000Hz
50-22000Hz
55-22000Hz
65-22000Hz
50-25000Hz
55-25000Hz
Polypro.
Polypro.
Polypro.
Polypro.
Polypro.
Polypro.
Polypro.
Polypro.
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
X amps
X subs
Pure power and presence – Redefined
Class, style, and performance are three words that have become synonymous with Xtant. The new X2 subwoofer is no exception. Capitalizing on proven
product components, X2 delivers unprecedented subwoofer accuracy and reliability. The exclusive cosmetic design adds style to any vehicle fortunate
enough to have them. Many of the same revolutionary features that Xtant woofers have been known for have been carefully carried through an evolution
to bring you X2. Increased power handling, increased motor size, strength and increased displacement collaborate to make the X2 subwoofer the best
in its class. The Hex-shaped cone with aluminum honeycomb dust cap provides approximately 10% more cone area than conventional round woofers.
This means you get first class engineering, exclusive style, and high performance SPL from Xtant’s hexagonal cone. The Hex-shape compression molded
gasket also allows multiple woofers to be mounted side-by-side creating a “honeycomb” effect for maximum bass performance. Other innovative features
of the X2 subwoofers from Xtant include:
• Spider Plateau Venting for extremely effective heat dissipation by providing cooling around the voice coil (where the most heat is generated).
• Dual 8 gauge, set screw terminals – Accepts up to 2 negative and 2 positive 8 AWG speaker cables for maximum signal transfer and ease of installation.
• Steel, chrome plated back plate
for increased thermal mass which greatly improves heat
dissipation while giving the
woofer the custom finish look.
• Black, custom tooled, die
cast aluminum basket transitions the basket to fit into a
standard round enclosure
cutout. • Die cast aluminum heat sink that encases the
motor and removes heat
directly from the voice coil gap for maximum power handling. X2 series subwoofers are sure to be a hit. Superior components, superior
design, superior engineering all set Xtant products and X2 subwoofers
apart from any other
brand in the industry.
The Modules
PQM: a true, fully adjustable, one band
parametric EQ—provides individual frequency,
Q/bandwidth, and boost or cut of up to 18dB gain adjustment control.
LFQ
: provides +4, +8, or +12dB of boost at a center freq. of 45Hz
RGM: adds remote gain control for either sub or stereo channels
RM12: activates the “passive speaker terminals» providing 12dB of attenuation for speakers connected to these terminals
RM8: activates the “passive speaker terminals» providing 8dB of attenuation for speakers connected
to these terminals
RM4: activates the “passive speaker terminals» providing 4dB of attenuation for speakers connected
to these terminals
X603E
Nbr of
Channel
3
X604E
4
X1001E
1
Power
@4Ω 12V
2x75+150W
Power
@2Ω 12V
2x150+300W
Bridged
Power @4Ω
2 x 300 W
Low-pass
X-over
12 or 24dB
High-pass
X-over
12 or 24dB
Band-pass
X-over
12 or 24dB
Xover
Frequency
20 to 20kHz
High
Level
Yes
Incorporated
Modules
PQM, LFQ, RGM, RM4, RM12
4 x 75 W
4 x 150 W
2 x 300 W
12 or 24dB
12 or 24dB
12 or 24dB
20 to 20kHz
Yes
PQM, RM4, RM12
1 x 500 W
1 x 1000 W
12 or 24dB
12 or 24dB
12 or 24dB
20 to 20kHz
Yes
PQM, RGM, LFQ
X2-1004
25cm
Impedance
4Ω
X2-1044
25cm
2x4Ω
X2-1204
30cm
X2-1244
30cm
Diameter
RMS
power
500W
X-max
Cone
Surround
Basket
ALDS
SPV
18mm
Polypropylene
Butil
Die cast
Yes
Yes
500W
18mm
Polypropylene
Butil
Die cast
Yes
Yes
4Ω
500W
18mm
Polypropylene
Butil
Die cast
Yes
Yes
2x4Ω
500W
18mm
Polypropylene
Butil
Die cast
Yes
Yes
XT1.i : THE BIGGEST LITTLE AMP IN CAR AUDIO HISTORY !
Xtant has shattered the myth that Class D is only for bass. With the Xtant1.1i, Xtant proves Class D can
deliver strikingly accurate sound across the entire musical spectrum.
The XT1.1i is a full-range amplifier which incorporates proprietary Class D technology developed over
a five-year period inside the walls of Xtant’s electronic design labs in Phoenix, Arizona.
Said Chairman and CEO Loyd Ivey, “We’re pushing beyond the limits of what everyone thought was
possible. For years, it’s been, ’You can’t use Class D for mid and high frequency applications.’ We
took that challenge and proved that with talent and ingenuity, you can do anything."
With its unique Class D technology, called Audiophile, Full-spectrum Class D, Xtant engineers
have given listeners all the efficiency of Class D. The result is less current draw for powerful
bass reproduction while delivering audiophile-level sound quality at higher frequencies.
At just over 5"w X 6"h, the xtant1.1i measures about the size of a CD jewel case from
corner to corner -taking up very little space on a display board. It’s perfect for stealth
installs or when space is at a premium in compact cars or family vehicles. Mount it
under seats, in the glove compartment, under the dashboard, or even in the center
console.
Beautifully aesthetic design, transparent and detailed sound reproduction, innovative technology... are the first three criteria by which all high end amplifiers
and speakers are judged. And Xtant does not fail to satisfy even the most demanding esoteric enthusiast. The heat sink is a polished stainless steel shield with
original designed hexagonal cut outs making the appearance of the amplifier
quite unique and definitely tasteful. XTC offers the most effective cooling system
known in the car audio environment. It allows for the outboard transistors to heat
up quickly which generates the warmth in the sound quality that every audiophile aficionado expects. XTC is even more effective when it comes to cooling down
those same transistors and the rest of the components in the amplifier. Using thin
sheets of sandwiched aluminium as a heat sink and medical grade ventilators for
reliability and noise, the amplifiers remain at a constant 60°c regardless of the
speaker load that it is connected to or the climate the vehicle is exposed to.
XT amps
A descriptive a product demands, to achieve
a long lasting image much like the most reputable classic sports cars have: Bugatti,
Ferrari Porsche, Maserati, Mercedes...Xtant
should be exactly what the car audiophile is
in quest of: tight deep bass, dynamic mids
and detailed highs.
The Xtant XT range suits every system configuration with an array of 5 models. For the
subs there are two Mono Blocks to choose
from: the 6.1 at 600W (CEA) and the 3.1
with 300W. Both incorporate features such
as balanced differential inputs, 24dB/Oct.
continuously variable low pass crossover,
24dB/Oct. subsonic filter between 20 and
80Hz, remote level control, N-channel MOSFet output section and a fully regulated,
transitional, ClassD power supply. The mid
and high range frequencies can be powered
either by the 4.1 - a 400W four channel amplifier - or the 2.1 offering 200W of stereo amplification. These amps offer balanced differential inputs allowing up to 17V, a 12dB/oct.
on the high pass and 24dB/oct. for the lows,
active resonance control to take away the
frequency bandwidth often affecting the mid
range frequencies due to car reverberation,
a continuously variable 0-12dB bass boost,
left right independent gains, full range RCA
outputs, N-channel, MOS-Fet output stage
and a fully regulated PWM power supply.
The 4.1 also bridges 2 rear channels easily
to configure a 3 channel system. For the ultimate in stereo separation and power supply
efficiency there’s the latest 1.1i (see above).
Once experienced the sound quality of an XT
amplifier will leave you addicted to a world of
beautiful music reproduction.
XT2.2
Nbr of
Channel
2
Power
2Ω 12V
2x100W
Power
4Ω 12V
2x50W
Bridged
Power
1x200W
Low-pass
Xover
24dB/oct
XT4.4
4
XT3.1
1
XT6.1
XT1.1i
High-pass
Xover
12dB/oct
Xover
Frequency
40 to 120Hz
4x100W
4x50W
2x200W
1x300W
1x150W
24dB/oct
12dB/oct
40 to 120Hz
24dB/oct
subsonic
40 to 120Hz
Yes
1
1x600W
1x300W
24dB/oct
subsonic
40 to 120Hz
Yes
1
1x100W
1x100W
EBC
Yes
Line
Out
Yes
High
Level
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
ARC
ZERO NOISE INTERCONNECTS
BEST
"Hear all the music as the artist ORIGINALLY intended"
StreetWires ZeroNoise® interconnects are the most sophisticated mobile audio cables in the world. With the «top of the
art» ZN6, StreetWires gives the best RCA cable of the car-audio
world. All ZN Interconnects feature -Twisted-pair construction
for all of the music with none of the noise. The connector size
and shape is designed for true functionality easy to grip, and
BETTER
GOOD
easy to install, patented ZeroNoise® Compact Sure Grip design
-The connectors are 24-karat Gold Plated for maximum signal
transfer and corrosion protection -Split-tip RCA center pins for
the most secure contact. These cables are the best you can
expect for your high-end system.
VIDEO
POWER STATION AMP KITS
ZN6
ZN3
ZN2
CONNECTOR
PIN : Split Pin Banana
CONNECTOR : Precision Machined
BODY : Sure Grip Machined
CABLE
DESIGN : Hyper Twist®
JACKET : Crystalflex®
WIRE : Silver Plated UltraGrain® OFC
INSULATION : Phase Flow® H.D. PE
CONNECTOR
PIN : Split Pin
CONNECTOR : Total Fit® Collar
BODY : Sure Grip Molded
CABLE
DESIGN : Twisted Pair
JACKET : Ultra Flex Dual
The better interconnect choice to enhance
clarity, dynamics, harmonic structure and
tonality from your mobile audio system!
The good interconnect choice to
enhance the clarity and dynamics from
your mobile audio system!
ZN6 Interconnects
ZN3 Interconnects
ZN2 Interconnects
ZN605
ZN610
ZN620
ZN635
ZN650
ZN660
ZN6FMM
ZN6MFF
ZN305
ZN310
ZN320
ZN335
ZN350
ZN360
ZN3204
ZN3354
ZN3504
ZN3604
ZN3FMM
ZN3MFF
ZN205
ZN210
ZN220
ZN235
ZN250
ZN260
ZN2204
ZN2354
ZN2504
ZN2604
ZN2FMM
ZN2MFF
CONNECTOR
PIN : Dual Split Pin Banana
CONNECTOR : Serpentine Cut® Machined
BODY : Sure Grip Machined
CABLE
DESIGN : Hyper Twist®
JACKET : Crystalflex®
WIRE : Silver Plated UltraGrain® OFC
INSULATION : Phase Perfect® Teflon Nylon
Braid
The best interconnect for clarity,
dynamics, harmonic structure and
tonality while maximizing sound stage, depth,
and imaging from your mobile audio system!
2-channel, .5 (1.6ft)
2-channel, 1m (3.3ft)
2-channel, 2m (6.5ft)
2-channel, 3.5m (11.5ft)
2-channel, 5m (16.4ft)
2-channel, 6m (19.7ft)
Y-connector, 1F/2M
Y-connector, 1M/2F
2-channel, .5m (1.6ft)
2-channel, 1m (3.3ft)
2-channel, 2m (6.5ft)
2-channel, 3.5m (11.5ft) 2-channel, 5m (16.4ft)
2-channel, 6m (19.7ft)
4-channel, 2m (6.5ft)
4-channel, 3.5m (11.5ft)
4-channel, 5m (16.4ft)
4-channel, 6m (19.7ft)
Y-connector, 1F/2M
Y-connector, 1M/2F
"Are you getting the best possible sound ?"
StreetWires cables and accessories, also known in the
car audio world as the #1 product to use in high end mobile
audio installations. Just check out the hottest show on MTV,
“Pimp My Ride” and you’ll see it’s all they use: StreetWires.
Whether it be high end interconnects with our unique Zero
Noise technology, power cables that have highest number
of copper strands per square centimeter, distribution blocks
available in all sizes and arrays.., we have it all in the highest
quality and design. That’s the reason why StreetWires won
a CEA Award in 2004 for innovation in design with the CBR44
which combines distribution and fuse block for both positive
and negative in one footprint : it’s a world first . How did we
think of this: because we design the product with the installer in mind. Our team of StreetWires engineers and designers have years of installation experience. And this can be
seen with each product.
Do you want to get the best possible picture from your new
DVD player? Do you want to hear all the music the way the
artist originally intended? Is maximizing the performance out
of your amplifier and subwoofer important to you? Of course
it is. That’s the philosophy behind StreetWires product design and quality.
WIRE : OFC (Oxygen Free Copper)
INSULATION : Phase Flow® H.D. PE
2-channel, .5m (1.6ft)
2-channel, 1m (3.3ft)
2-channel, 2m (6.5ft)
2-channel, 3.5m (11.5ft)
2-channel, 5m (16.4ft)
2-channel, 6m (19.7ft)
4-channel, 2m (6.5ft)
4-channel, 3.5m (11.5ft)
4-channel, 5m (16.4ft)
4-channel, 6m (19.7ft)
Y-connector, 1F/2M
Y-connector, 1M/2F
ZNV
PS00BX
CONNECTOR
PIN : Split Pin
CONNECTOR : Precision Machined
DIELECTRIC : L.D.P.E.
BODY : Sure Grip Machined
CABLE
DESIGN : True75™ Coaxial
JACKET : Ultra Flex
WIRE : OFC Braided Outer Conductor
INSULATION : Phase Flow® L.D. PE
The Best interconnect engineered for the automotive environment to maximize color, contrast,
brightness, sharper resolution, and enhanced
detail.
ZN Video Interconnects
• 75 ohm coaxial construction
• Braided clear coated jacket
ZNV10
Video, 1m (3.3ft)
ZNV35
Video, 3.5m (11.5ft)
ZNV50
Video, 5m (16.4ft)
ZNV60
Video, 6m (19.7ft)
ZNV Video Y-Cables
ZNV35Y
ZNV60Y
Video Y-Cable, 3.5m (11.5ft)
Video Y-Cable, 6m (19.7ft)
ZNV A/V Cables
ZNAV35
(11.5ft)
ZNAV60
Audio/Video Cable, 6m (19.7ft)
Audio/Video Cable, 3.5m
PS04B
with StreetWires ZNV Video Cable
with genericVideo Cable
PS10R
"Get all the Sound you paid for"
POWER AND SPEAKER CABLES
Super Cable "SC"
"Are you getting all the
power you paid for from
your amplifier ?"
“Not all power
cables are made
the same”
PS00BX
50mm2 power kit : 5,5m Blue + 1,5m Silver Cable, 4,8m remote cable, ANL inline fuse holder, 200A ANL Fuse, Battery
terminal, Ground terminal, Power ring terminal
PS04B
21mm2 multi amp power kit : 5,5m Blue 21mm2 + 3m Blue
10mm2 + 2,4m Silver 10mm2 Cable, 4,8m remote cable, AGU
inline fuse holder, 80A AGU Fuse, distribution block 21mm2
in 4x10mm2 out, Power ring terminals
PS04R
21mm2 multi amp power kit : 5,5m Red 21mm2 + 3m Red
10mm2 + 2,4m Silver 10mm2 Cable, 4,8m remote cable, AGU
inline fuse holder, 80A AGU Fuse, distribution block 21mm2
in 4x10mm2 out, Power ring terminal
PS04BS
21mm2 power kit : 5,5m Blue + 1,5m Silver Cable, 4,8m
remote cable, AGU inline fuse holder, 80A AGU Fuse
PS04RS
21mm2 power kit : 5,5m Red + 1,5m Silver Cable, 4,8m
remote cable, AGU inline fuse holder, 80A AGU Fuse
PS04BSI
21mm2 power kit : 5,5m Blue + 1,5m Silver Cable, AGU inline
fuse holder, 80A AGU Fuse, 5m ZN2 RCA with remote cable
PS04RSI
21mm2 power kit : 5,5m Red + 1,5m Silver Cable, AGU inline
fuse holder, 80A AGU Fuse, 5m ZN2 RCA with remote cable
PS08B
10mm2 power kit : 5,5m Blue + 1,5m Silver Cable,
4,8m remote cable, AGU inline fuse holder, 60A AGU Fuse
PS08R
10mm2 power kit : 5,5m Red + 1,5m Silver Cable, 4,8m
remote cable, AGU inline fuse holder, 60A AGU Fuse
PS04BSI
“Go to your
StreetWires
dealer for a
comparison test !”
POWER CAPACITORS
Power Station Capacitors
• The lowest E.S.R. and E.S.L. Ratings Achievable
• Digital Display models offer current sensing activation and shut down,
multiple display modes, audible warnings and machined terminal posts
PS08BI
10mm2 power kit : 5,5m Blue + 1,5m Silver Cable, AGU inline
fuse holder, 60A AGU Fuse, 5m ZN2 RCA with remote cable
PSC241D
Power Station Capacitor, 1 Farad, 20/24 V with Digital Display
PS08RI
10mm2 power kit : 5,5m Red + 1,5m Silver Cable, AGU inline
fuse holder, 60A AGU Fuse, 5m ZN2 RCA with remote cable
PSC201D
Power Station Capacitor, 1 Farad, 16/20 V with Digital Display
PS10B
6mm2 power kit : 5,5m Blue + 1,5m Silver Cable, 4,8m
remote cable, AGU inline fuse holder, 30A AGU Fuse
PS10R
6mm2 power kit : 5,5m Red + 1,5m Silver Cable, 4,8m remote
cable, AGU inline fuse holder, 30A AGU Fuse
PS10BI
6mm2 power kit : 5,5m Blue + 1,5m Silver Cable, AGU inline
fuse holder, 30A AGU Fuse, 5m ZN2 RCA with remote cable
PS08B
Ultra Cable®
• Fine-stranded high conductivity tinned copper windings
• Clear/Trans Blue Ultra-Flex jacketing
• Twisted construction
• Zero-grip insulation for smooth installations
UC12250 Ultra Cable, 3,3mm2 (12AWG), 76m (250’), Clear/trans blue
UC12500 Ultra Cable, 3,3mm2 (12AWG), 152m (500’), Clear/trans blue
UC14250 Ultra Cable, 2mm2 (14AWG), 76m (250’), Clear/trans blue
UC14500 Ultra Cable, 2mm2 (14AWG), 152m (500’), Clear/trans blue
Ultra Flow® Power Cable
• “The ultimate performance power cable”
• 105 °C temperature rating
• Available in clear and translucent red, blue or black jacketing with
silver-colored, tinned copper wire
• Poly FlexTM insulation resists battery acid, oil and gasoline
UF050R
50mm2 (1/0 AWG) Red, 4256 strands, 15,2m (50’) Reel
UF050BL 50mm2 (1/0 AWG) Blue, 4256 strands, 15,2m (50’) Reel
UF050S
50mm2 (1/0 AWG) Silver, 4256 strands, 15,2m (50’) Reel
UF050BK 50mm2 (1/0 AWG) Black, 4256 strands, 15,2m (50’) Reel
UF4100R 21mm2 (4 AWG) Red, 1672 strands, 30,5m (100’) Reel
UF4100BL 21mm2 (4 AWG) Blue, 1672 strands, 30,5m (100’) Reel
UF4100S 21mm2 (4 AWG) Silver, 1672 strands, 30,5m (100’) Reel
UF4100BK 21mm2 (4 AWG) Black, 1672 strands, 30,5m (100’) Reel
UF8250R 10mm2 (8 AWG) Red, 665 strands, 76,2m (250’) Reel
UF8250BL 10mm2 (8 AWG) Blue, 665 strands, 76,2m (250’) Reel
UF8250S 10mm2 (8 AWG) Silver, 665 strands, 76,2m (250’) Reel
UF8250BK 10mm2 (8 AWG) Black, 665 strands, 76,2m (250’) Reel
PS00R
50mm2 power kit : 5,5m Red + 1,5m Silver Cable, 4,8m remote cable, ANL inline fuse holder, 200A ANL Fuse, Ground
terminal, Power ring terminal
PS00R
Ultra Cable "UC"
Super Cable®
• Fine-stranded high conductivity copper windings
• Clear Ultra-Flex jacketing
• Low-profile parallel design for easy installations
• Zero-grip insulation for smooth installations
SC1450
Super Cable, 2mm2 (14AWG), 15,2m (50’), Clear
SC14500 Super Cable, 2mm2 (14AWG), 152m (500’), Clear
SC1650
Super Cable, 1,5mm2 (16 AWG), 15,2m (50’), Clear
SC16500 Super Cable, 1,5mm2 (16 AWG), 152m (500’), Clear
PSC201
Power Station Capacitor, 1 Farad, 16/20 V
FUSE HOLDERS AND FUSES
Waterproof In-Line Fuse Holders
• Hi-Amp fuse holders provide the ultimate protection
• Four-Stage Watertight System utilizes four O-rings for a
perfect waterproof seal
• Impact-resistant clear housing protects fuse while
allowing easy fuse inspection
• Diamond plate finish with gold detail
FH0ANL
ANL Fuse Holder, Diamond plate finish, 50mm2 (1/0 AWG)
FH4ANL
ANL Fuse Holder, Diamond plate finish, 21mm2 (4 AWG)
FH4AGUB
AGU Fuse holder, Diamond plate finish, 21mm2 (4 AWG)
FH8AGUB
AGU Fuse holder, Diamond plate finish, 10mm2 (8 AWG)
FH0ANL
FH4AFS
FH4AGUB
POWER DISTRIBUTION
Fuses
Maxi Fuses
• Color-coded for easy amperage identification
• See-through bodies for fuse inspection
MAX20 Yellow, 20 Amp, qty 2
MAX30 Green, 30 Amp, qty 2
MAX40 Orange, 40 Amp, qty 2
MAX50 Red, 50 Amp, qty 2
MAX60 Blue, 60 Amp, qty 2
MAX80 Clear, 80 Amp, qty 2
Combo Fuse Block
• Positive and negative power cables in one
footprint
• Power Ring® inputs accept any size input cable
• Four 21mm2 positive and negative outputs also
accept 10mm2 gauge
• Diamond plate finish with gold details
• Available in AGU, MAXI and AFS
CBR44A
AGU Combo Fuse block
CBR44M
MAXI Combo Fuse block
CBR44S
AFS Combo fuse bloc
CBR44S
ANL Fuses
• For the highest-power mobile audio systems
• Integrated viewing window for easy fuse inspection
• High-temperature, impact resistant polymer bodies
• Screen-printed StreetWires logos and amperage ratings
ANL60 Gold plated, 60 Amp, qty 1
ANL80 Gold plated, 80 Amp, qty 1
ANL100 Gold plated, 100 Amp, qty 1
ANL150 Gold plated, 150 Amp, qty 1
ANL200 Gold plated, 200 Amp, qty 1
ANL300 Gold plated, 300 Amp, qty 1
Maxi Fuses
FBR24M
CBR44M
ANL Fuses
AGU Fuses
AFS Fuses
AGU Fuses
• High-temperature, impact-resistant glass
• 24-karat Gold Plated
AGU10 Gold, 10 Amp, qty 4
AGU20 Gold, 20 Amp, qty 4
AGU30 Gold, 30 Amp, qty 4
AGU40 Gold, 40 Amp, qty 4
AGU50 Gold, 50 Amp, qty 4
AGU60 Gold, 60 Amp, qty 4
AGU70 Gold, 70 Amp, qty 4
AGU80 Gold, 80 Amp, qty 4
AFS Fuses
• Color-coded for easy amperage identification,
see-through bodies for fuse inspection
AFS40 40 Amp, qty 2
AFS60 60 Amp, qty 2
AFS80 80 Amp, qty 2
AFS100 100 Amp, qty 2
AFS125 125 Amp, qty 2
AFS150 150 Amp, qty 2
2 Position Fused Distribution Blocks
• Available in AGU, MAXI and AFS
• Exclusive ribbed base design ensures proper
fuse alignment
• Spring steel clips provide lifelong tight fuse
contact
• Power Ring® main input connection accepts any
gauge power cable
FBR24A
2 Position AGU Fuse Holder
FBR24M
2 Position MAXI Fuse Holder
FBR24S
2 Position AFS Fuse Holder
CBR44A
FBR24S
DBR30
Single Input Power Distribution Blocks
• Designed for systems with up to 4 amplifiers
DB048 Diamond Plate Finish, Input: 50mm2 (1),
Output: 10mm2 (4)
DB448 Diamond Plate Finish, Input: 21mm2 (1),
Output: 10mm2 (4)
DBR44 Diamond Plate Finish, Input: Ring (1),
Output: 21mm2 (4)
DBR30 Diamond Plate Finish, Input: Ring (1),
Output: 50mm2 (3)
DBR44
DB048
DB0240
Expandable Power Distribution Blocks
• Expandable design for unlimited adaptability
DB0240 Diamond Plate Finish, Input: 50mm2 (2),
Output: 21mm2 (2)
DB0480 Diamond Plate Finish, Input: 50mm2 (2),
Output: 10mm2 (4)
ACCESSORIES
BT2PF
ACCESSORIES
Inter-Lok® Power Rings®
• The industry standard. There is no more secure or higher-conductivity connection than the precision-machined, compression fit
Inter-Lok®
• Maintains gas-tight contact with every strand of wire
• Machined wrench flats allow easy tightening
• Machined external sculpting turns power delivery into a work of art
RTI0
Diamond Plate finish, 50mm2 (1/0 AWG), qty 2
RTI4
Diamond Plate finish, 21mm2 (4 AWG), qty 2
RTI0
RT8
RT4
RTC88
ST124
RTC05
RTC45
GT0
BT1P
Power Station Capacitors
• Brushed aluminium design
• BTR connectors
• Transparent holders included
CAP1 Power Capacitor, 1 Farad, 20 V
CAP1D Power Capacitor, 1 Farad, 20 V with Digital Display
Battery Posts
• All battery posts are machined from billet
brass and have polarity markings
BTGMT GM Truck Adaptor, qty 1
BTSML Side Mount Adaptor (long), qty 1
BTSMS Side Mount Adaptor (short), qty 1
BTSTC Side To Top Mount Converter, qty 1
CAP1D
Set Screw Power Rings®
• Precision-machined from billet high-conductivity brass
• Two step termination
• Heavy duty gold plated steel socket set screws
RTS0
Diamond Plate finish, 50mm2 (1/0 AWG), qty 2
RTS4
Diamond Plate finish, 21mm2 (4 AWG), qty 2
RTS8
Diamond Plate finish, 10mm2 (8 AWG), qty 2
Crimp Ring Terminals
• Pulse plated with pure 24-karat gold
• Includes red and black heat shrink
RTC08
Gold Plated, 8mm hole diam., 50mm2 (1/0 AWG), qty 2
RTC48
Gold Plated, 8mm hole diam., 21mm2 (4 AWG), qty 4
RTC88
Gold Plated, 8mm hole diam., 10mm2 (8 AWG), qty 4
RTC05
Gold Plated, 5mm hole diam., 50mm2 (1/0 AWG), qty 2
RTC45
Gold Plated, 5mm hole diam., 21mm2 (4 AWG), qty 4
RTC85
Gold Plated, 5mm hole diam., 10mm2 (8 AWG), qty 4
Spade Terminals
• Pulse-plated with pure 24-karat gold
• Includes protective PVC boots
• Available in peg packaging for slat wall display
• Available in bulk packaging for the installation bay
ST42
Spade Connector, 21mm2 (4AWG), qty 2
ST4100
Spade Connector, 21mm2 (4AWG), qty 100
ST84
Spade Connector, 10mm2 (8AWG), qty 4
ST8100
Spade Connector, 10mm2 (8AWG), qty 100
ST124
Spade Connector, 3,3mm2 (12AWG), qty 4
ST12100 Spade Connector, 3,3mm2 (12AWG), qty 100
ST164
Spade Connector, 1,5mm2 (16AWG), qty 4
ST16100 Spade Connector, 1,5mm2 (16AWG), qty 100
ST164
BT2P
Battery Clamps
• All battery clamps are machined from forged
brass and have polarity markings
• Advanced clamping technique assures connection
integrity
• Impact Resistant Cover Included
BT1N
Battery Terminal, Negative, 1 screw
BT2N
Battery Terminal, Negative, 2 screws
BT1P
Battery Terminal, Positive, 1 screw
BT2P
Battery Terminal, Positive, 2 screws
BT2PF
Battery Terminal, Positive, 1 screw
with Built-in AFS Fuse Holder
BTSTC
BTGMT
BTSMS
BTSML
Firewall Bushings
• Allows for a water-tight seal when power
wires pass through metal
• Locks securely as bushing is tightened
FWB0
Firewall Bushings, 50mm2 (1/0 AWG), qty 1
FWB4
Firewall Bushings, 21mm2 (4 AWG), qty 1
FWB8
Firewall Bushings, 10mm2 (8 AWG), qty 1
CAP1
Clip-Its
• High-quality cable tie-downs for a neat installation
CL0
Dual Clip-Its, 50mm2 (1/0 AWG), 2 Pair
CL4
Dual Clip-Its, 21mm2 (4 AWG), 2 Pair
CL8
Dual Clip-Its, 10mm2 (8 AWG), 2 Pair
FWB0
FWB4
Power Kits
AK4
21mm2 Power Kit, contains 5m (16') red power cable, 1m
(3') black ground cable, 5m (16') RCA cable, 5m (16') blue
remote cable, AGU fuse holder, AGU fuse, accessories.
AK8
10mm2 Power Kit, contains 5m (16') red power cable, 1m
(3') black ground cable, 5m (16') RCA cable, 5m (16') blue
remote cable, AGU fuse holder, AGU fuse, accessories.
CL0
CL4
GT4
Ground Terminals
• Precision-machined from Forged Brass
• Two-step Termination
• Ultra-secure, Low-resistance Grounding
GT0
Ground Terminal 50mm2 (1/0 Gauge)
GT4
Ground Terminal 21mm2 (4 Gauge)
AK8
AK4
AK4
www.mtxaudio.eu - www.coustic.eu - www.xtant.eu - www.streetwires.eu - www.mitekeurope.com