Olympus C-370 Quick Start Guide

Add to my manuals
2 Pages

advertisement

Olympus C-370 Quick Start Guide | Manualzz
d4205_qsg_e_6.fm
1 ページ
2004年8月2日 月曜日 午後11時58分
VT905001
QuickStart Guide
Two Corporate Center Drive, PO Box 9058, Melville,
NY 11747-9058, U.S.A.
http://www.olympusamerica.com/support
D-535 ZOOM / C-370 ZOOM / X-450
Thank you for purchacing an Olympus digital camera.
Wendenstrasse 14-18,
20097 Hamburg, Germany
http://www.olympus-europa.com
http://www.olympus.com/
UNPACKING THE BOX CONTENTS
Gather your digital camera and the parts as shown in the illustration. If any accompanying item is missing or damaged, contact
the store where you purchased the camera.
START HERE
DIGITAL CAMERA
APPAREIL PHOTO NUMÉRIQUE
DIGITALKAMERA
CÁMARA DIGITAL
D-535 ZOOM
C-370 ZOOM
X-450
ENGLISH ..........2
BASIC MANUAL
MANUEL DE BASE
EINFACHE ANLEITUNG
MANUAL BÁSICO
It is strongly recommended that you follow these step-by-step
numbered instructions to set up and quickly begin using your
new Digital camera.
FRANÇAIS .....40
DEUTSCH ......78
ESPAÑOL ....116
Digital camera
Strap
AA (R6) alkaline
batteries (2)
USB cable
Basic manual
Reference Manual OLYMPUS Master CD-ROM/
Installation guide
CD-ROM
The following items are also included in the Digital camera package: video cable, warranty card, registration card (not provided in
some areas), and safety precautions booklet.
PREPARING THE
CAMERA FOR USE
2
Before you begin using your Olympus Digital camera…
Holding the lock button, slide the
battery compartment/card cover in
the direction of
, and then lift it in
the direction of
.
4
Lock button
Holding the batteries down with the
battery compartment/card cover,
close the cover in the direction of
and slide it in the direction of
.
a. Loading the batteries
1
Make sure the camera is turned off.
• The monitor is off.
• The green lamp and the orange lamp
on the camera are off.
• The lens is not extended.
Orange lamp
3
Insert the batteries, making sure that
they are correctly oriented as shown
in the illustration.
Green lamp
Monitor
TURNING ON THE CAMERA
c. Camera Diagram and Controls
Turn the camera on and check the monitor indications.
a. Turning the Camera On
Set the mode dial to
switch.
Now take a moment to familiarize yourself with the key areas of camera controls by reviewing the
illustrations.
Shutter button
Strap eyelet
Flash
Self-timer lamp
(Shooting mode)
Power switch
and press the power
• The camera turns on in the shooting mode.
• The lens extends and the monitor turns on.
TIPS
b. Attaching the strap
Battery compartment/card cover
Mode dial
VIDEO OUT jack
To maximize battery life, the monitor turns off and the
camera enters sleep mode after approximately 30
seconds of non-use.To reactivate the camera, press
the shutter button or
.
USB connector
DC-IN jack
• To turn the camera off, press the power switch.
Shooting button (
)
b. Setting the Date and Time
Monitor
Shooting button (
Set the date and time before using the camera for
the first time.
The information will be recorded with each picture.
Orange lamp
Green lamp
Menu button (
Playback button (
)
OK button (
5
Move to the year field.
2
Select
6
Set the year.
Power switch
)
PUSH
Display the menu.
Zoom button
Mode dial
OK button (
Card slot
)
Arrow pad (
Erase button (
Menu button (
)
)
)
Macro mode button (
Display the
screen.
7
Self-timer button (
Reset button (
)
)
Repeat Steps 5 and 6 until all date/time fields
have been set.
• Time is entered using the 24-hour format.
Flash standby
AF target mark
Monitor Indications in Playback Mode
Print reservation,
Number of prints
Green lamp
Current memory
Battery check
Select the date format.
• The following steps show the procedure
used when Y-M-D is selected.
)
)
Monitor Indications in Shooting Mode
4
Battery compartment
Exposure compensation
button (
)
Flash mode button (
3
Battery compartment/
card cover
Tripod socket
)
OPEN
1
Lock button
)
Arrow pad (
.
)
Protect
Battery check
8
File number
Shooting mode
Press
to set the date and time.
Record mode
Resolution
Macro mode
Exposure
compensation
Flash mode
Self-timer
Exposure compensation
9
Press
to exit the menu.
Record mode
Current memory
Date and time
Number of storable
still pictures
Number of frames
Resolution
TIPS
Depending on the camera settings, not all indicators will be displayed.
Printed in China
d4205_qsg_e_6.fm
2 ページ
2004年8月2日 月曜日 午後11時58分
TAKING PICTURES
Let’s press the shutter button and take a picture – it’s easy.
b. Zooming
Press toward W to zoom
out and get everything
into the picture.
Press toward T to choose
telephoto shooting and
make the subject bigger.
Position the AF target mark on the subject while looking at the
monitor and decide on composition.
Flash standby
(Lights when taking pictures
with flash)
Press
to select the flash
mode, and press
.
Use the zoom button to zoom in closer to the subject or zoom
out for a wide-angle shot.
a. Taking a Picture
1
2
Icon
Flash Mode
No
indication
Auto flash
Fill-in Flash
Green lamp
(Lights when the subject is in
focus)
This digital camera features multiple flash modes. Choose
the mode best suited to the shooting conditions and the kind
of picture you want.
Zoom button
TIPS
Icons representing camera settings appear on the monitor, telling
you important information such as the flash and record modes,
battery life and the number of frames remaining.
2
Press the shutter button gently (halfway) to adjust the focus.
• The focus is properly set when the green lamp lights.
• The # indicator lights steadily when the flash is ready to fire.
3
Press the shutter button completely to take the picture.
1
Press
2
Playback button (
)
Arrow pad
(
Not all flash modes are available depending on the shooting mode
selected. Refer to the Reference Manual for more information.
b. Erasing Pictures
Note
Displays the next
picture.
Jumps to the picture 10 frames ahead.
• To return to the shooting mode,
press
.
mark lights or
lights: The flash is ready to fire when the shutter button is fully
depressed.
blinks: The flash is charging. Wait until the mark changes from
brinking status to steady.
Jumps to the picture 10 frames back.
a. Viewing Pictures
The flash does not fire regardless of the light
conditions.
)
Use the arrow pad to playback other pictures.
Displays the previous
picture.
The flash always fires with every picture.
When the shutter button is pressed halfway, the
blinks.
TIPS
With a digital camera, you can easily view the photos you
want - and delete the ones you don’t.
With the camera in the shooting
mode, press
.
• Playback mode is set.
• The last picture taken appears in
the monitor.
3
.
Flash mode button (
VIEWING AND ERASING
PICTURES
1
Flash Off
c. Flash Modes
AF target mark
(Indicates the area on which
the camera is focused)
The camera automatically decides if the flash is
needed.
Red-eye Reduction Reduces incidence of red eyes by emitting preflashes.
Flash
Press
Shutter button
Description
Shooting button (
)
Erase button (
)
Deletes only the picture currently
displayed in the monitor.
Once erased, pictures cannot
be restored. Check each
picture before erasing to avoid
accidentally erasing pictures
you want to keep.
1
Display the picture you want to
erase.
2
3
Press
OK button (
Arrow pad
(
)
)
.
Select [YES], and press
.
• The picture will be erased.
)
TIPS
The “all-frame erase” function erases all frames stored in the camera. Refer
to the Reference Manual for more information.
CONNECTING THE CAMERA TO A COMPUTER
Olympus makes it simple to connect your camera to a
computer and download pictures.
TIPS
Olympus recommends using the optional AC adapter to ensure a
consistent power supply when downloading images.
a. Installing OLYMPUS Master
1
2
b. Connecting to a computer
Insert the CD-ROM into the CDROM drive.
• The OLYMPUS Master installation
screen is displayed.
Plug the other end of the USB cable into the USB connector on
your camera.
• The camera starts communicating with the PC and the selection
screen for the USB connector is displayed on the camera’s monitor.
4
Select [PC], and press
.
• When the camera is recognized
by the PC, a new icon appears
on the desktop.
Make sure that the camera is turned off before
connecting it to your computer.
Note
1
Make sure the camera is turned off.
• The monitor is off.
• The green lamp and the orange lamp on the camera are off.
• The lens is not extended.
2
Plug the USB cable provided with the camera into the USB port
on your computer.
Connector cover
Click the [OLYMPUS Master] button.
• Installation starts.
• Follow the on-screen instructions
to complete the installation.
TIPS
3
Look for this mark.
For more information on operating environment and installation
procedure of OLYMPUS Master, refer to the Reference Manual.
USB port
USB cable
USB connector
For advanced users
About the functions and
detailed instructions on
how to use them...
To enjoy the images
on your PC...
DIGITAL CAMERA
APPAREIL PHOTO NUMÉRIQUE
DIGITALKAMERA
CÁMARA DIGITAL
D-535 ZOOM
C-370 ZOOM
X-450
BASIC MANUAL
MANUEL DE BASE
EINFACHE ANLEITUNG
MANUAL BÁSICO
ENGLISH ..........2
FRANÇAIS .....40
DEUTSCH ......78
ESPAÑOL ....116
See “BASIC MANUAL” to find out the capabilities of
your camera.
Insert the CD-ROM provided with the camera to your PC,
and refer to “REFERENCE MANUAL” on the CD-ROM for
more information.
Insert the Olympus Master CD-ROM
provided with the camera to your PC, and
enjoy pictures with the OLYMPUS Master
software.
• Play back still pictures and movies.
• Perform the editing such as rotating and trimming of images.
Technical Support (USA)
• Take pictures using the optimal settings according to the
shooting conditions.
• Manage images using the calendar function.
• Record movies.
• Make online user registration of camera (confirm that your PC is
connected to Internet beforehand).
1-888-553-4448 (Toll-free)
8:00 AM - 10:00 PM ET
Monday - Friday
• Increase the maximum number of pictures to take with an
optional xD-Picture Card inserted.
• Play back pictures on your TV using the video cable provided with the camera.
• Use the direct print function, connecting the camera and PictBridge-compatible
printer with the USB cable provided with the camera.
• Print images easily.
European Technical Customer
Support
00800 - 67 10 83 00 (Toll-free)
+49 180 5 - 67 10 83 or
+49 40 - 237 73 899 (Charged)
9:00 AM - 6:00 PM MET
Monday - Friday
© 2004

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement