Omron Healthcare HEM-711AC User's Manual

280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 1
INSTRUCTION MANUAL
ENGLISH
ESPAÑOL
Automatic Blood Pressure Monitor
with Arm Cuff
Model HEM-711AC
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 2
TABLE OF CONTENTS
Before Using the Monitor
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Operating the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Risk of Electrical Shock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Before Taking a Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Operating Instructions
Know Your Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Unit Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Display Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Irregular Heartbeat Symbol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Movement Error Symbol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Average Value Symbol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Heartbeat Symbol/Hypertension Indicator . . . . . . . . . . . . . . . . . . . .12
Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Using the AC Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Setting the Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Applying the Arm Cuff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Taking a Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Special Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Using the Memory Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Averaging Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
To Display the Measurement Values . . . . . . . . . . . . . . . . . . . . . . . .28
To Delete All Values Stored in the Memory . . . . . . . . . . . . . . . . . .30
Care and Maintenance
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Error Indicators and Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . .33
FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
2
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 3
Before Using the Monitor
INTRODUCTION
Thank you for purchasing the Omron® HEM-711AC IntelliSense®
Automatic Blood Pressure Monitor with Arm Cuff.
Fill in for future reference.
DATE PURCHASED: __________________
SERIAL NUMBER: ____________________
Staple your purchase receipt here
Your new digital blood pressure monitor uses the oscillometric method
of blood pressure measurement. This means the monitor detects your
blood’s movement through your brachial artery and converts the
movements into a digital reading. The monitor stores measurement
results.
The HEM-711AC comes with the following components:
• Monitor
• AC Adapter
• Warranty Card
• Standard Adult Arm Cuff
• Storage Case
• Instruction Manual printed in English and Spanish
The HEM-711AC IntelliSense® Automatic Blood Pressure Monitor is
intended for home use.
SAVE THESE INSTRUCTIONS
3
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 4
SAFETY INFORMATION
To assure the correct use of the product basic safety measures should
always be followed including the warnings and cautions listed in this
instruction manual.
SAFETY SYMBOLS USED IN THIS INSTRUCTION MANUAL
WARNING
Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION
Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury to the user or patient or
damage to the equipment or other property.
OPERATING THE DEVICE
Contact your physician for specific information about your blood
pressure. Self-diagnosis and treatment using measured results may be
dangerous. Follow the instructions of your physician or licensed
healthcare provider.
If battery fluid gets in your eyes, immediately rinse with plenty of
clean water. Contact a physician immediately.
Read all of the information in the instruction manual and any other
literature in the box before operating the unit.
This device is intended for use in measuring blood pressure and
pulse rate in the adult population. Do not use this device on infants
or persons who cannot express their intentions.
4
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 5
SAFETY INFORMATION
OPERATING THE DEVICE (continued)
Read the Special Conditions section (page 27) of the instruction
manual if your systolic pressure is known to be more than 220
mmHg. Inflating to a higher pressure than necessary may result in
bruising where the cuff is applied.
Operate the device only as intended. Do not use the device for any
other purpose.
Dispose of the device, components and optional accessories according to applicable local regulations. Unlawful disposal may cause
environmental pollution.
Do not use a cellular phone near the device. It may result in an
operational failure.
Use only Omron authorized parts and accessories. Parts and
accessories not approved for use with the device may damage the
unit.
Use only 1.5V manganese or alkaline batteries with this device. Do
not use other types of batteries. This may damage the unit.
RISK OF ELECTRICAL SHOCK
Do not plug or unplug the power cord into the electrical outlet with
wet hands.
Do not overload power outlets. Plug the device into the appropriate
voltage outlet.
5
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 6
SAFETY INFORMATION
CARE AND MAINTENANCE
Do not subject the monitor to strong shocks such as dropping the
unit on the floor.
Do not submerge the device or any of the components in water.
Store the device and the components in a clean, safe location.
Changes or modification not approved by Omron Healthcare will
void the user warranty. Do not disassemble or attempt to repair the
unit or components.
6
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 7
BEFORE TAKING A MEASUREMENT
To ensure a reliable reading follow these recommendations:
1. Avoid eating, drinking alcohol, smoking, exercising, and bathing for
30 minutes before taking a measurement. Rest for at least 15 minutes
before taking the measurement.
2. Stress raises blood pressure. Avoid taking measurements during
stressful times.
3. Measurements should be taken in a quiet place.
4. Remove tight-fitting clothing from your arm.
5. Sit on a chair with your feet flat on the floor. Rest your arm on
a table so that the cuff is at the same level as your heart.
6. Remain still and do not talk during the measurement.
7. Keep a record of your blood pressure and pulse readings for your
physician. A single measurement does not provide an accurate
indication of your true blood pressure. You need to take and record
several readings over a period of time. Try to measure your blood
pressure at about the same time each day for consistency.
8. Wait 2-3 minutes between measurements. The wait time allows the
arteries to return to the condition prior to taking the blood pressure
measurement. You may need to increase the wait time depending on
your individual physiological characteristics.
7
Operating Instructions
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 8
KNOW YOUR UNIT
Main Unit:
Display
Battery Compartment
START/STOP Button
MEMORY Button
Air Jack
Date/Time Setting Button
Components:
AC Adapter Jack
Air Tube
Storage Case
Air Plug (Connects to Air Jack)
Arm Cuff
INSTRUCTION MANUAL
ENGLISH
ESP
ESPAÑOL
Automatic Blood Pressure Monitor
with Arm Cuff
Model HEM-711AC
Instruction Manual
AC Adapter
8
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 9
UNIT DISPLAY
Systolic Blood Pressure
Diastolic Blood Pressure
Memory Symbol
Average Value Symbol
Heartbeat Symbol/
Hypertension Indicator
Pulse Display
Deflation Symbol
Movement Error Symbol
Date/Time Display
Irregular Heartbeat Symbol
Low Battery Indicator
9
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 10
DISPLAY SYMBOLS
IRREGULAR HEARTBEAT SYMBOL (
)
When the monitor detects an irregular rhythm two or more times during
the measurement, the Irregular Heartbeat Symbol ( ) will appear on
the display with the measurement values.
Normal Heartbeat
An irregular heartbeat rhythm is defined
as a rhythm that is more than 25% slower
or 25% faster than the average rhythm
detected while the monitor is measuring
the systolic blood pressure and the
diastolic blood pressure.
Pulse
Blood
pressure
Irregular Heartbeat
Short Long
Pulse
If the irregular heartbeat symbol ( )
displays with your measurement results,
we recommend you consult your
physician. Follow the directions of your
doctor.
Blood
pressure
MOVEMENT ERROR SYMBOL (
)
The Movement Error Symbol (
) is displayed if you move your body
during the measurement. Please remove the arm cuff, wait 2-3 minutes,
reapply the arm cuff, then take another measurement.
AVERAGE VALUE SYMBOL (
)
The Average Value Symbol (
) is displayed when you press the
MEMORY button. The most recent average reading appears on the
display screen.
10
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 11
DISPLAY SYMBOLS
The American Heart Association recommends the following guideline
for upper limit of normal for home blood pressure readings:
AHA Home Guideline for Upper Limit of Normal BP
Systolic Blood Pressure
135 mmHg
Diastolic Blood Pressure
85 mmHg
This is a general guideline because blood pressure depends on age
and morbidity. The AHA recommends a lower home blood pressure
goal for certain patients, including diabetic patients, pregnant women,
and patients with renal failure1.
The monitor is not intended to be a diagnostic device.
WARNING
Contact your physician for specific information about your blood
pressure. Self-diagnosis and treatment using measured results may
be dangerous. Follow the instructions of your physician or licensed
healthcare provider.
American Heart Association Scientific Statement 2004
1
11
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 12
DISPLAY SYMBOLS
HEARTBEAT SYMBOL/HYPERTENSION INDICATOR (
)
TAKING A MEASUREMENT
The Heartbeat Symbol flashes on the display during
the measurement.
The Heartbeat Symbol flashes at every heartbeat.
When the measurement is complete, the Heartbeat Symbol
flashes on the display with your blood pressure and pulse rate if
the reading is above 135 for the Systolic Blood Pressure value
and/or 85 for the Diastolic Blood Pressure value.
USING THE MEMORY FUNCTION
The Heartbeat Symbol flashes when the blood pressure reading
stored in the memory is above 135 for the Systolic Blood
Pressure value and/or 85 for the Diastolic Blood Pressure value.
Omron Healthcare recommends you contact your physician if the
HEARTBEAT SYMBOL appears on the display with your measurement
values.
12
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 13
BATTERY INSTALLATION
1. Press the ▼ indicator on the battery cover
and slide the cover off in the direction of
the arrow.
2. Install 4 “AA” size batteries so the +
(positive) and - (negative) polarities match
the polarities of the battery compartment
as indicated.
3. Replace the battery cover.
13
Battery Cover
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 14
BATTERY INSTALLATION
BATTERY REPLACEMENT
Low Battery Indicator
When the Low Battery Indicator appears on the display screen turn the
monitor off and remove all the batteries. Replace with four new batteries
at the same time. Longlife alkaline batteries are recommended.
CAUTION
If battery fluid should get in your eyes, immediately rinse with
plenty of clean water. Contact a physician immediately.
NOTES: • Turn the unit off before replacing the batteries. If the
batteries are removed while the unit is still on, the date and
time will be reset to that of the previous use. However, the
measurement results are not deleted.
• When the batteries are replaced, you may need to reset the
date and time. If the year is flashing on the display screen,
refer to “Resetting the Date and Time” on page 20.
CAUTION
Dispose of the device, components and optional accessories
according to applicable local regulations. Unlawful disposal may
cause environmental pollution.
14
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 15
USING THE AC ADAPTER
NOTES: • Use only the authorized Omron AC Adapter that came with
this monitor.
• We recommend you install the batteries even if the AC
Adapter is used. If no batteries are installed, you may need
to reset the date and time if the AC Adapter is disconnected.
The measurement results will not be deleted.
CAUTION
Use only Omron authorized parts and accessories. Parts and
accessories not approved for use with the device may damage the
unit.
15
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 16
USING THE AC ADAPTER
TO CONNECT THE AC ADAPTER
Insert the AC Adapter Plug
into the AC Adapter Jack on
the back side of the monitor
as illustrated.
Plug the AC Adapter into a
120V AC outlet (60 cycles).
Housing
2
1
Cord
TO DISCONNECT THE AC ADAPTER
Hold and pull the Housing to remove the AC Adapter from the
electrical outlet. Do not remove by pulling on the cord.
Remove the AC Adapter plug from the monitor.
WARNING
Do not plug or unplug the power cord into the electrical outlet with
wet hands.
CAUTION
Do not overload power outlets. Plug the device into the appropriate
voltage outlet.
16
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 17
SETTING THE DATE AND TIME
Set the monitor to the current date and time before taking a
measurement for the first time. If the date and time are not set correctly,
the measurement values stored in the memory and the average values
may not be correct.
The Blood Pressure Monitor automatically stores up to 60 individual
measurement values with the dates and times.
The monitor can also calculate an average reading based on the three
most recent measurements taken within 10 minutes of the last reading.
NOTES: • If only two readings are stored in the memory for the 10minute period, the average is based on the two readings.
• If one reading is stored in the memory for the 10-minute
period, this reading is displayed as the average.
1. TO START THE SETTING
Press and hold the Date/Time
Setting button to adjust the date
and time.
STOP
The year flashes on the display.
17
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 18
SETTING THE DATE AND TIME
2. SETTING THE YEAR
The year can be set between 2006 and
2030. When the display reaches 2030, it
will return to 2006.
STOP
Press the MEMORY button to advance by
increments of one year.
Press the Date/Time Setting button to set
the current year.
STOP
The month flashes on the display.
NOTE: Press and hold the MEMORY
button to advance the date and time
values faster.
3. SETTING THE MONTH
Press the MEMORY button to advance by increments of one month.
Press the Date/Time Setting button to set the current month.
STOP
The day flashes on the display.
18
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 19
SETTING THE DATE AND TIME
4. SETTING THE DAY
Press the MEMORY button to advance by increments of one day.
Press the Date/Time Setting button to set the current day.
STOP
The hour flashes on the display.
5. SETTING THE HOUR
The time is set using AM or PM.
Press the MEMORY button to advance by increments of one hour.
Press the Date/Time Setting button to set
the current hour.
STOP
The minute flashes on the display.
6. SETTING THE MINUTE
Press the MEMORY button to advance by increments of one minute.
Press the Date/Time Setting button to set the minute setting.
7. TO TURN THE MONITOR OFF
Press the START/STOP button.
NOTE: The monitor will automatically turn off after the minute has
been set after battery replacement.
19
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 20
SETTING THE DATE AND TIME
RESETTING THE DATE AND TIME
To adjust the date or time after it has been setup when you first use the
unit:
Start with the monitor in the off position.
1. Press and hold the Date/Time
Setting button.
STOP
The year flashes on the display.
2. Follow the instruction from step 2 on page 18.
NOTE: If you need to change the Date and Time,
always adjust the Date and Time setting before taking
the next measurement.
20
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 21
APPLYING THE ARM CUFF
CAUTION
Read all of the information in the instruction manual and any other
literature in the box before operating the unit.
CAUTION
This device is intended for use in measuring blood pressure and
pulse rate in the adult population. Do not use this device on infants
or persons who cannot express their intentions.
APPLYING THE CUFF ON THE LEFT ARM
1. Make sure the air plug is securely inserted in the main unit.
2. Remove tight-fitting clothing from your upper left arm.
21
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 22
APPLYING THE ARM CUFF
3. Apply the cuff to your left upper arm so the blue arrow is centered on
the inside of your arm and aligned with your middle finger. The air
tube runs down the inside of your arm. The bottom of the cuff should
be approximately 1/2" above your elbow.
1/2 inch (1 - 2 cm)
Blue Arrow
Air Tube
4. Wrap the cuff firmly in place around your arm using the closure strip.
22
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 23
APPLYING THE ARM CUFF
APPLYING THE CUFF ON THE RIGHT ARM
When taking a measurement using the right arm use this instruction
for Step 4 on page 22.
Apply the cuff to your right upper arm so the blue arrow and the air tube
runs along the inside of your elbow. The bottom of the cuff should be
approximately 1/2'' above your elbow.
NOTE: Be careful not to rest your arm on the air tube. This will restrict
the flow of air to the cuff.
23
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 24
TAKING A MEASUREMENT
The monitor automatically determines your ideal inflation level. In rare
circumstances when a higher inflation may be necessary, the monitor
automatically re-inflates the cuff up to 30 mmHg higher than the initial
inflation and restarts the measurement.
CAUTION
Operate the device only as intended. Do not use the device for any
other purpose.
1. Sit on a chair with your feet flat on the floor. Place your left arm on a
table so the cuff is level with your heart.
24
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 25
TAKING A MEASUREMENT
2. Press the START/STOP button.
All symbols appear on the display.
The cuff starts to inflate automatically. As the cuff inflates, the
monitor automatically determines your ideal inflation level. This
monitor detects the pulse during inflation. Do not move your arm and
remain still until the entire measurement process is completed.
START
STOP
NOTE: To stop the inflation or measurement, press the START/STOP
button. The monitor will stop inflating, start deflating and turn
off.
3. Inflation stops automatically and the measurement is started.
As the cuff deflates, decreasing numbers appear on the display. The
Heartbeat Symbol ( ) flashes at every heartbeat.
25
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 26
TAKING A MEASUREMENT
4. When the measurement is complete, the arm cuff
completely deflates. Your blood pressure and pulse
rate are displayed.
5. Press the START/STOP button to turn
the monitor off.
START
STOP
NOTE: The monitor will automatically
turn off after five minutes.
When the measurement is complete, the Heartbeat Symbol flashes on
the display with your blood pressure and pulse rate if the reading is
above 135 for the Systolic Blood Pressure value and/or 85 for the
Diastolic Blood Pressure value.
26
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 27
TAKING A MEASUREMENT
SPECIAL CONDITIONS
CAUTION
Inflating to a higher pressure than necessary may result in bruising
where the cuff is applied.
If your systolic pressure is known to be more than 220 mmHg, press
and hold the START/STOP button until the monitor inflates 30 to 40
mmHg higher than your expected systolic pressure.
START
STOP
NOTES: • Do not apply more pressure than necessary.
• The monitor will not inflate above 299 mmHg.
When the measurement is complete, the arm cuff completely deflates.
Your blood pressure and pulse rate are displayed.
27
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 28
USING THE MEMORY FUNCTION
The monitor is designed to store the blood pressure and the pulse rate in
the memory every time a measurement is completed.
The monitor automatically stores up to 60 sets of measurement values
(blood pressure and pulse rate). When 60 sets of measurement values are
stored, the oldest record is deleted to save the most recent values.
AVERAGING FUNCTION
The monitor calculates the average reading based on the three most
recent sets of measurement values taken within 10 minutes of the most
recent reading.
NOTE: If two sets of measurement values are stored in the memory for
the 10 minutes period, the average is based on the two sets of
measurement value. If one set of measurement values is stored,
this is displayed as the average.
TO DISPLAY THE MEASUREMENT VALUES
1. Press the MEMORY button.
The Average Symbol (
reading is shown.
) appears on the display when the average
STOP
28
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 29
USING THE MEMORY FUNCTION
2. Press the MEMORY button to display the most recent set of
measurement values on the screen. The values are displayed from the
most recent to the oldest.
Alternating display
NOTES: • The date and time are alternately displayed with the
measurement values.
• Press the MEMORY button to display the next set of values.
• Press and hold the MEMORY button to display the values
faster.
3. Press the START/STOP button to turn the power off.
29
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 30
USING THE MEMORY FUNCTION
TO DELETE ALL VALUES STORED IN THE MEMORY
You cannot partially delete values stored in the memory. All values will
be deleted.
1. First press the MEMORY button. While holding it down, press the
START/STOP button together for more than 2 seconds. All values
will be deleted.
2. Press the START/STOP button to turn the monitor off.
NOTE: The monitor will automatically turn off after 5 minutes.
START
STOP
30
Care and Maintenance
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 31
CARE AND MAINTENANCE
To keep your digital blood pressure monitor in the best condition and
protect the unit from damage, follow the directions listed below:
Keep the monitor in the storage case when not
in use. Make sure the AC Adapter is placed
under the main unit so that is does not
damage the display. Avoid kinking or sharply
bending the AC Adapter cord.
Do not forcefully bend the arm cuff or air tube. Do not fold tightly.
Clean the monitor with a soft dry cloth. Do not use any abrasive or
volatile cleaners. Do not attempt to clean the cuff.
CAUTION
Do not submerge the device or any of the components in water. Do
not subject the monitor to extreme hot or cold temperatures,
humidity or direct sunlight.
CAUTION
Store the device and the components in a clean, safe location.
CAUTION
Do not subject the monitor to strong shocks, such as dropping the
unit on the floor.
31
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 32
CARE AND MAINTENANCE
Remove the batteries if the unit will not be used for three months or
longer. Always replace all the batteries with new ones at the same time.
Use the unit consistent with the instruction provided in this manual.
CAUTION
Changes or modification not approved by Omron Healthcare will
void the user warranty. Do not disassemble or attempt to repair the
unit or components.
CAUTION
Use only Omron authorized parts and accessories. Parts and
accessories not approved for use with the device may damage the
unit.
32
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 33
ERROR INDICATORS AND TROUBLESHOOTING TIPS
ERROR INDICATORS
SYMBOL
CAUSE
CORRECTION
Cuff under-inflated.
Cuff not applied
correctly.
Remove the arm cuff. Read,
“Taking a Measurement”.
Reapply the arm cuff and take
another measurement.
Cuff over-inflated
Monitor could not
detect pulse wave.
Take another measurement and
remain still until the
measurement is complete.
Air plug is not
connected.
Replace the four batteries. Refer
to “Battery Installation.”
Batteries are worn
33
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 34
ERROR INDICATORS AND TROUBLESHOOTING TIPS
TROUBLESHOOTING TIPS
PROBLEM
CAUSES AND SOLUTIONS
No power.
Replace all four batteries with new
ones.
No display appears on the unit. Check the battery installation
for proper placement of the
battery polarities.
Measurement values appear
too high or too low.
Blood pressure varies constantly.
Many factors including stress, time
of day, and how you wrap the cuff,
may affect your blood pressure.
Review the sections “Before Taking
a Measurement” and “Taking a
Measurement.”
34
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 35
FCC STATEMENT
Note:
POTENTIAL FOR RADIO/TELEVISION INTERFERENCE (for U.S.A. only)
This product has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. The product generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If the product does cause harmful interference to radio or television
reception, which can be determined by turning the product on and off, the
user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the product and the receiver.
• Connect the product into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
POTENTIAL FOR RADIO/TELEVISION INTERFERENCE (for Canada only)
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the interference-causing equipment
standard entitled “Digital Apparatus”, ICES-003 of the Canadian Department of
Communications.
Cet appareil numérique respecte les limites de bruits radioeléctriques
applicables aux appareils numériques de Clase B prescrites dans la norme sur le
materiel brouilleur: “Appareils Numériques”, ICES-003 édictée par le minister
des communications.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
35
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 36
WARRANTY
Your HEM-711AC IntelliSense® Automatic Blood Pressure Monitor, excluding
the arm cuff, is warranted to be free from defects in materials and workmanship
appearing within 5 years from the date of purchase, when used in accordance
with the instructions provided with the monitor. The arm cuff is warranted to be
free from defects in materials and workmanship appearing within one year from
the date of purchase when the monitor is used in accordance with the instructions
provided with the monitor. The above warranties extend only to the
original retail purchaser.
We will, at our option, repair or replace without charge any monitor or arm cuff
covered by the above warranties. Repair or replacement is our only
responsibility and your only remedy under the above warranties.
To obtain warranty service contact Omron Healthcare for the address
of the repair location. Shipping instructions and repair information is available by
calling 1-800-634-4350 or visit our website at www.omronhealthcare.com.
Enclose the Proof of Purchase. Include $5.00 for the return shipping and handling.
Include a letter, with your name, address, phone number, and description of the
specific problem. Pack the product carefully to prevent damage in transit.
Because of possible loss in transit, we recommend insuring the product with
return receipt requested.
ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF
THE APPLICABLE WRITTEN WARRANTY ABOVE. Some states do not
allow limitations on how long an implied warranty lasts, so the above limitation
may not apply to you.
OMRON SHALL NOT BE LIABLE FOR LOSS OF USE OR ANY OTHER
INCIDENTAL, CONSEQUENTIAL OR INDIRECT COSTS, EXPENSES
OR DAMAGES. Some states do not allow the exclusion or limitation of incidental
or consequential damages, so the above exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights
which may vary from state to state.
FOR CUSTOMER SERVICE
Visit our web site at:
www.omronhealthcare.com
Call toll free:
1-800-634-4350
36
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Page 37
SPECIFICATIONS
Model:
Display:
Measurement Range:
Accuracy/Calibration:
HEM-711AC
LCD Digital Display
Pressure: 0 to 299 mmHg, Pulse: 40 to 180/min.
Pressure: ±3mmHg or 2% of reading
Pulse: ±5% of reading
Inflation:
Automatic by electric pump
Deflation:
Automatic pressure release valve
Rapid Air Release:
Automatic exhaust valve
Pressure Detection:
Capacitive pressure sensor
Measurement Method: Oscillometric method
Pulse Wave Detection: Capacitance type pressure sensor
Power Source:
120V 60Hz AC adapter or 4 “AA” batteries
Battery Life:
Approx. 1500 uses when used 2 times a day
with 4 new alkaline batteries
Operating Temperature 50ºF to 104ºF (10ºC to 40ºC) /30 to 85% RH
/Humidity:
Storage Temperature
-4ºF to 140ºF (-20ºC to 60ºC) /10 to 95% RH
/Humidity/Air Pressure: /700 - 1060 hPa
Main Unit Weight:
Approximately 12 1/2 oz. (355 g)
not including batteries
Main Unit Dimensions: Approx. 6 3/32" (l) × 5 5/32" (w) × 3 5/16" (h)
(155 mm × 131 mm × 84 mm)
Cuff Size:
Approx. 5 3/4" (w) × 17 1/2" (l) (146 mm × 446 mm)
Cuff tube 23 5/8" (l) (600 mm)
Cuff Circumference:
Fits arm circumferences 9" to 13" (220 mm to 320 mm)
Memory:
Up to 60 readings
Contents:
Main Unit, Arm Cuff, AC Adapter, Instruction Manual,
Storage Case and Warranty Card
UPC Code:
0 73796 07115 8
NOTE: These specifications are subject to change without notice.
37
280239_HEM-7011-E_S.qxd
2/19/08
3:00 PM
Manufactured by OMRON HEALTHCARE
Made in China
Distributed by:
OMRON HEALTHCARE, INC.
1200 Lakeside Drive
Bannockburn, Illinois 60015
www.omronhealthcare.com
Copyright © 2008 Omron Healthcare, Inc.
Page 38