Innovations
2013|2014
A new dimension of welding
/// Perfection is the Principle
Blue Evolution®
3
Years
5
Years
transformer
and rectifier
ewm-warranty
24 hours | 7 days
BlueEvolution® – the major sustainability initiative from ewm.
Saves money, secures jobs and protects the environment.
/// simply more
For sustainable conduct
and economic success: BlueEvolution® –
now new with MULTIMATRIX
With the BlueEvolution® sustainability campaign in combination with MULTIMATRIX,
we support you in unifying sustainable conduct and business success. Because
MULTIMATRIX stands for our promise to perfect the welding system with technological innovations and optimisations:
You can work more quickly, economically and resource-conserving – while maintaining
top quality. The procurement costs are amortised within the shortest possible time,
hence you are able to extend your competitive edge!
What BlueEvolution® means for you:
Saving money
Secure jobs...
Protecting the environment...
...because your material, energy and
labour costs are reduced: Thanks to
innovative welding processes, you require fewer passes and therefore less
shielding gas and welding consumables, whilst cutting your welding times
as well. You will consume less energy
due to the high efficiency of the ewm
welding machines. And, the durable
ewm welding torches deliver convincing performance with an extremely
long service life.
...because you benefit from clear competitive advantages: through quicker,
more secure and cost-effective work
processes, with less preparatory and
finishing work. Thus, with the ewm system you can substantially increase your
productivity and adhere to customer
delivery deadlines – while providing top
quality.
...because you work in a resourceconserving manner at all levels: by
using innovative welding processes
requiring fewer passes, and requiring
less welding consumables and gas.
This way you not only save time – you
also increase the energy efficiency and
lower emissions. The reduced consumption of materials by the compact
ewm inverter welding machines is
good for the environment.
Trade fair innovation 2013
An investment in the future
MULTIMATRIX is the devised solution for all your
welding tasks – today and tomorrow.
Welding processes, material characteristics, networking and individual operation are being continuously
further developed by ewm.
The MULTIMATRIX technology makes it possible to
quickly adapt to these new
developments or welding tasks by way of data
exchange via USB memory
stick or LAN/WLAN networks.
Contents
Page
MULTIMATRIX
The new dimension in welding
The Welding Code.
At ewm, the “welding code” means an in-depth understanding of what constitutes a perfect weld seam
in the context of your specific welding task. With this
knowledge, combined with decades of experience, it is
possible to make sustainable improvements to your
complete welding process.
New products
Overview
Control Expert 2.0
Wire feeder drive 4X
Network software ewm Xnet 1.0
Pico 350 cel puls
4
6
8
22
30
ewm forceArc / forceArc puls
10
ewm coldArc / coldArc puls
12
ewm rootArc / rootArc puls
14
Standard / pulsed arc
16
ewm pipeSolution / superPuls
18
Technical Data
24
/// Perfection is the principle
The new dimension in welding
Simply more cost savings: through MULTIMATRIX technology!
The complete system from a single source – from the welding machine to the welding torch to
process-optimised welding consumables.

Simply better welding: due to clearly improved welding characteristics in all MIG/MAG processes, thanks to innovative
MULTIMATRIX technology

Simply more cost controlling: through the network administration software ewm Xnet 1.0, with corresponding LAN and
WLAN interfaces

Simply more safety: through certified welding processes in accordance with EN 1090

Simply a better overview: convenient and intuitive operation
through the control unit Expert 2.0, with a large LCD display
Highly dynamic
forceArc® power module
High-performance inverter
80 V output voltage
coldArc® power module for
heat-reduced welding
alpha Q puls
MIG/MAG
forceArc/forceArc puls
coldArc/coldArc puls
rootArc/rootArc puls
Pulsed arc
Standard arc
pipeSolution
superPuls
MMA
TIG (lift arc)
Gouging
4
EWM AG /// www.ewm-group.com



/ 
/ 
/ 







MULTIMATRIX
Perfection is the principle
Advantages of the MULTIMATRIX technology
3
Years
5
Years
transformer
and rectifier
ewm-warranty
24 hours | 7 days
 Certified in accordance with EN 1090


Simply more sustainability: less power
consumption due to highly-efficient
welding processes, high degree of effectiveness and standby function

Simply more convenience: easier
handling of the function torch with
X technology – without an additional
control cable

Simply more guarantee:
3 years / 5 years
Simply more quality: through
precise and rugged wire feeding
provided by the wire feeder drive 4X
 Highly dynamic, rugged inverter
technology
 Electricity savings through efficient welding processes, high degree of effectiveness and automatic standby mode
 High open circuit voltage for excellent ignition
characteristics
 High voltage reserves for long hose packages up
to 70 m!
Highly dynamic
forceArc® power module
Highly dynamic
forceArc® power module
High-performance inverter
80 V output voltage
High-performance inverter
80 V output voltage
 High duty cycle
 Broad mains voltage tolerance
(-25% to +20%)
 For all climatic zones, from the desert to Antarctica
 Rugged, dust-protected electronics
 High-performance cooling unit with centrifugal
pump
 Large cooling water tank
Phoenix puls
Taurus Synergic S
 3-year guarantee, also for 3-shift, 24-hour/7-day
operations
 5-year guarantee for transformer and rectifier
 / 
- /  / 






Still have questions?
/
 /






-
/// Perfection is the principle
We would be pleased to personally assist you
at tel.: +49 2680 181-0
EWM AG /// www.ewm-group.com
5
MULTIMATRIX
Perfection is the principle
Everything at a glance, with quick access
Expert 2.0 – Easy and intuitive
Expert knowledge – directly accessible. Numerous welding tasks can now be more easily set up and
read out. This means that all information displays can be individually adapted to the requirements
of the user; operating errors are thus drastically reduced. Thanks to the new full-text menu, you also
have the entire welding process and all important parameter available at a glance.
Arc performance
/
Display of the effective arc length
for a simple calculation of energy
per unit length
Clearly arranged LCD screen
Self-explanatory symbols
i-Button
/
/
Scaled access authorisation
Individual menu adaptation
Click wheel
USB port
/
Easy and intuitive to operate
Plain text operation at a glance:
/
6
For the welding supervisor: All information at a
glance
EWM AG /// www.ewm-group.com
/
Job selection: Material, gas and wire by means of click
wheel operation
MULTIMATRIX
Intuitive operation
Advantages of the MULTIMATRIX technology
Practise-based control
Easy data exchange by means of USB memory stick
 Clearly arranged, self-explanatory key buttons and
LCD screen.
Invest in the future!
/
Welding processes, material characteristics,
networking and individual operation are being
continuously further developed by ewm.
/
The MULTIMATRIX technology makes it possible
to quickly adapt to these new developments or
welding tasks by way of data exchange via USB
memory stick or LAN/WLAN network.
 Plain text display for welding parameters and
functions
 Job selection: Material, gas and wire by means of
click wheel
 Display of the effective arc performance for simple
energy per unit length calculation
 Networking of any number of different power
sources via LAN/WLAN by means of ewm Xnet 1.0
administrator software.
Access authorisation by means of i-Button
 Simple data exchange via USB memory stick or
LAN/WLAN network.
/
Administration of access rights for different control operating levels
/
Identification of the welder
 You have a perfect overview of everything, even
when looking through a welding helmet
/
Provision of individual welding parameters for the
respective welders
 Anti-glare surface, easily readable even with
reflected light
/
The administrator software ewm Xnet 1.0 shows
which welder has used a particular welding machine and for how long.
 Membrane keyboard is resistant against dust, dirt
and moisture
 "Matrix operation" – quicker changing between the
levels
LAN/WLAN networking of power sources
1
LAN/WLAN networking via integrated control Expert 2.0
2
Networking via a factory-installed LAN/WLAN gateway
3
Networking via an external LAN/WLAN gateway
1
2
 Administration of access rights for different control operating levels
3
/// Perfection is the principle
For information on the topic of networking ewm welding machines, please consult
the brochure "Administrator Software ewm Xnet 1.0".
EWM AG /// www.ewm-group.com
7
MULTIMATRIX
Wire feeder drive 4X
Precise and rugged wire feeding
Wire feeder drive 4X
drive 4x – The small, rugged one
For universal usage
Quickly configured
/
Dust-proof wire spool cap
/
/
/
/
/
Wire inspection window for checking the wire
stock level
Simple and convenient spool change
Suitable for 200 mm and 300 mm wire spools
Tool-free changing of intermediate hose
packages
Strain-relieved hose package
Shock-protected hose package connections
Arc performance
/
Precise 4-roll feed
/
/
/
/
Display of the effective arc length
for a simple calculation of energy
per unit length
Automatic wire inching
Easy, tool-free roller change
Permanently secure roll fastener
Completely insulated interior
Standby mode
/
Save electricity through automatic standby function
Wire roll safeguarding
/
Safe locking system,
wire rolls won't fall out
/
/
/
Usable for:
alpha Q puls
decompactable, mobile
8
Protected connections
Rugged structure
EWM AG /// www.ewm-group.com
Solidly-designed base of aluminium continuous casting
Mounting possibilities for sliding rails, rubber feet or wheel kit
Optional preparation for crane device
Phoenix puls/Taurus
decompact, modular
/
/
/
Recessed Euro torch connector and
water connections
Plastic impact protection
Optional connection to the arc
gouging
Phoenix puls/Taurus
decompact, modular
MULTIMATRIX
Perfection is the principle
Advantages of the MULTIMATRIX technology
Easy to transport – ideal for cramped
workplaces and hard to reach locations
 Low weight 13 kg
 Compact design, will pass through manholes
LxWxH in mm: 660x280x390
 It is particularly advantageous at constructions sites,
when frequent reconfiguration is necessary or when
transporting the equipment; has a central handle
 Has a wheel set, crane device, rubber feet and sliding
rails
Easy service and maintenance
 Change of hose packages and wire rolls can be done
without tools
 Production-standard strain relief
 Rugged electronics in a dust-free enclosure
Safe wire feeding from spools and drums
 Fully-automatic wire inching of the wire on the
workpiece
 Optional wire feeding from a drum
 Suitable for 200 mm or 300 mm wire spools
 Adjustable spool mandrel brake for steady unwind-
Innovative wire feeder
/
/
/
/
/
4-roll drive (4x toothed)
Tool-free roller change
Rolls marked in colour
Large roller diameter (37 mm) for
optimum transfer of force
Permanently secure roll fastener
/
/
/
/
/
Less abrasion because of less play in the rollers (2x ball bearings per axle)
Adjustment aid for contact pressure
Covered gearing – no danger of injury
Aluminium pressure cast housing
Rugged and low-maintenance
ing of the wire and interference-free feeding
Safe wire feeding – including over greater
distances – and welding, even at hard to
access areas
 Production-standard preparation for miniDrive and
push/pull operation
MT welding torch with X technology
Plug and weld – tool-free roller change
Function torch without separate control cable
 Less weight, improved
1
2
Easy and quick roller change – without tools
1. Start position
3
handling and greater freedom of movement
 Safe and rugged; without
control cable and additional connector plug
 Simplified service
2. Extend permanently secure roller fastener
3. Changing a roller
EWM AG /// www.ewm-group.com
9
MULTIMATRIX
Perfection is the principle
forceArc
forceArc puls
Taurus
Synergic S
Efficient and cost-effective welding
Phoenix puls
alpha Q puls
Heat-reduced, directionally stable and powerful arc with deep penetration for the upper
power range.
Non-alloyed, low-alloy and high-alloy steels and high-tensile fine-grained steels
 Smaller included angle due to deep penetration and directionally stable arc





Fewer passes
Less distortion thanks to heat-reduced, concentrated arc
Excellent root and sidewall fusion
 Virtually spatter-free
 Particularly beneficial for fillet welds, dynamically loaded
components such as load-bearing parts for bridges, wagon
and steel construction and other applications
 Non-alloyed, low-alloy and high-alloy steels, as well as
high-tensile fine-grained steels
Perfect welding, even with very long stick-outs
 Manual and automated
Reduced undercuts
applications
Process comparison of forceArc®/standard spray arc through TWI
 Butt welds which are welded with the forceArc® process and have tight opening angles of 30 ° and 40 ° comply with the
requirements of EN ISO 15614-1:2004
 Due to the lower weld volume, the welding times are reduced compared to the standard spray arc process with an opening
angle of 60° by up to 50%
 Fillet welds created with forceArc® provide a mitred profile without undercut which also satisfies the requirements of EN ISO
15614-1:2004
 Fillet welds created with forceArc® have a greater penetration depth
standard spray arc
60°
forceArc
30°
11 passes
5 passes
50% shorter welding time
Unchanged mechanical/technological properties!
 Deeper penetration and therefore possible
reduction of the effective throat thickness or
seam cross-section
 Changes to stick-out lengths are
rapidly stabilised
 Particularly advantageous for very
narrow joints and fillet welds, for example
10
EWM AG /// www.ewm-group.com
MULTIMATRIX
Perfection is the principle
The ewm EN 1090 WPQR Package saves time and money
// forceArc // forceArc puls
 Combination of forceArc puls, forceArc and coldArc
 Root pass with coldArc, intermediate passes with forceArc and final pass with
forceArc puls






Saves a welding pass with a smaller included angle
Perfect ignition and crater fill time with forceArc puls, welding with forceArc
Less material distortion due to reduced heat input
Lower intermediate pass temperature and minimised joint modification
Particularly advantageous when, for example, welding fine-grained steels
Angular shrinkage reduced in fillet welds
Sheet metal: S 235; 20 mm
Gas:
M21-ArC-18
Wire:
1.2 mm G4Si1
Passes: 4
Position: PC
Included angle: 10°
Welded on one side, without weld pool backing
forceArc
coldArc
Combination of coldArc,
forceArc puls
forceArc and forceArc puls
Advantages of the MULTIMATRIX technology
forceArc
forceArc puls
 Up to 60% overall cost savings
when comparing forceArc® vs. standard spray
arc welding.
 Up to 35% electricity cost savings with the same
deposition rate when compared to conventional
spray arc welding
 Up to 50% less harmful emissions through reduced welding fumes
 Cost savings thanks to fewer passes
 Less spatter means less finishing work
 Less distortion thanks to heat-reduced,
concentrated arc
 Highly dynamic current control produces a directionally stable arc with great force and great
penetration depth with fewer undercuts
Efficient and cost-effective welding




Overall cost savings of up to 60%
Minimal seam preparation
Fewer passes
Less welding consumables and shielding gas consumption
 Faster welding time
 Particularly advantageous with dynamically loaded components
Sheet metal: S 355; 30 mm
Gas:
M21-ArC-18
Wire:
1.2 mm G4Si1
Passes: 11
Position: PB/PA
Included angle: 25°
Welded on one side, without weld pool backing with
forceArc
/// Perfection is the principle
EWM AG /// www.ewm-group.com
11
MULTIMATRIX
Perfection is the principle
coldArc
coldArc puls
Perfect welding and brazing
alpha Q puls
coldArc: Heat-reduced, low-spatter short arc for high dimensional stability welding and
brazing, plus root welding with excellent gap bridging capabilities.
coldArc puls: The optimum enhancement for the higher performance range, with focused
heat input – there where the heat is required.
 Less distortion and reduced discolouration thanks
to minimised heat input
 Excellent wetting of surfaces when
brazing thin metal sheets
 Considerably reduced spatter thanks to
virtually power-free material transfer
 Minimal finishing work, also optimum for visible
seams
thanks to low-spatter process
 Impressive process stability even with long hose
packages without additional sensor leads
 Commercial torch systems, as the material is
transferred without drive in the torch,
causing no wear and tear
 Easy welding of the root passes in all
sheet thicknesses and in all positions
 Perfect gap bridging even with
inconsistent gap widths
Minimised heat input
 Unalloyed, low-alloy and high-alloy steels and also
dissimilar joints of even the thinnest metal sheets
 Brazing of CrNi sheets with CuAl8/AlBz8
 Brazing and welding of coated metal sheets,
e.g. with CuSi, AlSi and Zn
 Root welding of non-alloyed and low-alloy steels
and high-tensile fine-grained steels
 Visible CrNi seams within the thin metal sheet
range
-99% less spatter
 Outstanding for butt welds, lap welds and edge
welds
 Perfect for visible seams – no post weld work
necessary
 Ideally suited for high-alloy steels and coated
metal sheets
 Less discolouration and scaling
 Reduced heat-affected zone
 Excellent control for positional welding
CrNi edge weld of 1 mm sheet metal, with coldArc
12
EWM AG /// www.ewm-group.com
MULTIMATRIX
Perfection is the principle
The ewm EN 1090 WPQR Package saves time and money
// coldArc
// coldArc puls
 Heat, where it is required with coldArc puls
 Root welding with coldArc: full control of the globular transfer, minimised risk of bonding faults
 Pass build-up and final passes with coldArc puls
 Performance enhancement for thicker metal sheets
with coldArc puls
 Perfect welding in transitional areas with coldArc
puls
 Switching between coldArc and coldArc puls by
pressing the torch trigger for secure overlaying of
tack points.
 Simple modelling of the molten metal through automatic changing between coldArc and coldArc puls
by switching on superPuls.
 Excellent and easy welding from a standing position through changing between coldArc and coldArc
puls by switching on superPuls, without using the
"Christmas tree technique".
Unique gap bridging for root passes
Advantages of the MULTIMATRIX technology
coldArc
coldArc puls
 Root welding with TIG quality and MAG speed
– up to 400% quicker than manual TIG and
MMA welding.
 Thin metal welding of plain steel and stainless steel, with much less distortion.
 Reduced-energy short arc with unique gap
bridging.
 Digitally controlled, nearly power-free material transfer.
 Perfect for sheet metal from 0.5 mm onward.
 -99% less spatter
 Outstanding for butt welds, lap welds and
edge welds.
 Ideal for CO2 and mixed gas.
 Heat-reduced brazing with innovative, zincbased solders with low melting point.
 Up to 75% less welding fume
emissions when compared with coldArc/coldArc puls vs. standard short arc
 Perfect gap bridging, even with alternating gap
widths, thanks to coldArc
 No sagging of the molten metal
 Secure sidewall fusion, even with misaligned edges
 Complete elimination of "wire stab"
 Root passes for all panel thicknesses in all positions
 Pass build-up and final passes with coldArc puls
/// Perfection is the principle
EWM AG /// www.ewm-group.com
13
MULTIMATRIX
Perfection is the principle
root Arc
root Arc puls
Taurus
Synergic S
The arc with optimum control of the
weld pool
Phoenix puls
alpha Q puls
rootArc: Short arc with perfect weld modelling capabilities for effortless gap
bridging and positional welding
rootArc puls: The perfect enhancement for focused heat input for the higher performance range
 Optimum reduction of spatter compared to standard short arc
 Excellent, heat-reduced welding in vertical-up
positions (PF) through rootArc superPuls
 Perfect for sheet metal from 1 mm onward
 Optimal for positional and overhead welding
 Superb root formation and secure
sidewall fusion
 Reduced-energy short arc
 Vertical-up welds without weaving
 rootArc puls for welding in transitional areas and
for initial and final passes
 Un-alloyed and low-alloy steels
 Manual and automated applications
Effortless gap bridging in the vertical-down weld
 Stable, firm vertical-down weld
 Very good gap bridging
 Heat-reduced, low-spatter arc
 Superb root formation and secure sidewall
fusion
3 mm
4 mm
Sheet metal:
Gap:
Gas:
Wire:
14
3 mm
4 mm
M21-ArC-18
1.0 mm SG3
EWM AG /// www.ewm-group.com
Front
Back
MULTIMATRIX
Perfection is the principle
The ewm EN 1090 WPQR Package saves time and money
//rootArc
Advantages of the MULTIMATRIX technology
root Arc
root Arc puls
// rootArc puls
 Reliable short arc welding in all positions
 Heat input, if necessary, with rootArc puls
 Root welding with rootArc: Effortless controlling of the weld pool
 Pass build-up and final passes with rootArc puls
 Performance enhancement for thick metal sheets with rootArc puls
 Switching between rootArc and rootArc puls by pressing the torch trigger for
secure overlaying of tack points
 Effortless mastery of the weld pool by changing between rootArc and
rootArc puls through switching on superPuls
 Quick and easy welding of vertical-up welds by changing between rootArc
and rootArc puls through switching on superPuls
 Ideally suited for vertical-up welds (PF)
without using the laborious "Christmas tree
technique"
 Quick and reliable root welding in TIG quality
 Effortless welding of vertical-up/down welds
and overhead welds
 Ideal for CO2 and mixed gas
 Reduced-energy short arc for effortless mastery of gaps
 Low-spatter, digitally-controlled material
transfer
 Perfect for sheet metal from 1 mm onward
 Excellent for butt welds and lap welds
Vertical-up welds in the PF position
 Excellent welding in vertical-up
weld positions (PF) with rootArcsuperPuls
 Secure formation of the root base
 No more weaving required
 Smooth "herring bone" effect results
in aesthetically pleasing weld seams
The "Christmas tree technique", normally reserved for true experts, can be
avoided, which is advantageous for less
experienced staff.
PF
/// Perfection is the principle
EWM AG /// www.ewm-group.com
15
MULTIMATRIX
Perfection is the principle
Pulsed arc
Standard arc
The arc with optimum control of the
weld pool
Taurus
Synergic S
Phoenix puls
alpha Q puls
Pulsed arc: Controlled, short circuit-proof pulsed arc for all positions
Standard arc: Controlled short arc far into the transitional area
 Welding of aluminium and aluminium alloys
 Welding of high-alloy steels and Ni alloys
 Even globular transfer also for materials with high Ni content
 Stable arc in the wide transitional area between short and spray arc
 Copper welding
 Positional welding
 Controlled heat input via 1-globular-per-pulse-transfer
Aluminium welding with pulsed arc
 Perfect pulse welding of aluminium and aluminium alloys, for sheet metal thicknesses from 1 mm onward
 Stable arc in all positions, even when welding the thinnest aluminium sheets
 Almost spatter-free welding
 Spatter-free ignition by reversing the wire feeding
 Simple modelling of the molten metal through superPuls
Fillet weld, 1 mm sheet metal, AlMg, argon
1.2 mm wire electrode
16
EWM AG /// www.ewm-group.com
Fillet weld, 8 mm sheet metal, AlMg, argon
1.2 mm wire electrode
Perfect ripples, thanks to superPuls
MULTIMATRIX
Perfection is the principle
The ewm EN 1090 WPQR Package saves time and money
// Pulsed arc
// Standard arc
 Extended standard short arc range of up to 11 m/min wire, with 1 mm wire
diameter G4Si1 under mixed gas
 Less spatter and better arc stability through controlled short arc – to far
beyond the transitional area
 High short-circuit frequency, steady weld pool, fine-globularlet material
transfer
 Higher welding speeds
Advantages of the MULTIMATRIX technology
Pulsed arc
Standard arc
 Perfect welding of aluminium and aluminium
alloys, high-alloy steels and Ni alloys, from 1 mm
metal sheet thickness onward
 Even globular transfer also for materials with
high Ni content
 Copper welding
 Simple modelling of the molten metal through automatic changing between
pulse and standard arc by switching on superPuls
 Extreme low-spatter pulsed arc, also in positional welding
 Excellent welding in the vertical up position through automatic changing
between pulse and standard arc by switching on superPuls
 Quick and reliable changes to stick-out lengths
 Spatter-free ignition through reversible wire
feeding
 Extended standard short arc range, to far into
the transitional area
 Fine globular material transfer in the extended
short arc range when welding low-alloy steels
CrNi welding with pulsed arc
 Perfect pulse welding of high-alloy steels and Ni alloys, also for thin sheet
metal from 1 mm onward
 Reliable arc welding in all positions
 Very low-spatter process (fewer corrosion attack points)
 Reduced pore susceptibility
 Flat, smooth and notch-free weld seams
Sheet metal:
Materials:
Gas:
Wire:
Position:
3 mm
CrNi 1.4301
97.5% Ar/2.5% CO2
1.2 mm 1.4316
PB
/// Perfection is the principle
EWM AG /// www.ewm-group.com
17
MULTIMATRIX
Perfection is the principle
Advantages of the MULTIMATRIX technology
pipeSolution
pipeTruck – MAG orbital system
 pipeSolution/pipeTruck – up to 400% quicker
than manual TIG and MMA welding
 Low and high-alloy solid wires (e.g. for the
parent metal alloy 625)
 Rutile and basic flux-cored wires (e.g. for the
parent metal high heat-resistant steel P91)
 Performance is significantly enhanced for
root welding: Automated pipeSolution®
achieves 150 to 500 mm per minute
pipeSolution
pipeTruck – MAG orbital system
Welding at MAG speed with TIG reliability.
Powerful short arc for rapid, safe welding,
with and without gaps, in all positions.
 Root welding for metal sheets and pipes in all positions
 Hot pass/intermediate pass with pulsed arc
 Intermediate/final pass with flux cored wire
 Safe overhead welding thanks to optimum viscosity of the weld pool
 Reduction or elimination of preparation work, e.g. weld pool backing
 root welding in one operation without backing
run
 Virtually power-free material transfer
 MAG welding with pipeSolution® process on
pipes with 3,400 mm diameter – wall thicknesses up to 30 mm
 Unalloyed, low-alloy and high-alloy steels and high-tensile fine-grained steels
 Impressive process stability, even with long hose packages without additional
sensor leads
 Flawless welding result – high quality: certified by TÜV Hesse in welding procedure test
according to AD 2000 regulations
 Root welding in one operation: Especially
efficient, without a backing run, without weld
pool backing
 Considerable reduction in set-up time –
the 19-kg tractor is placed effortlessly on
the track system and can be clamped in
quickly
 The entire pipeTruck MAG orbital system from
a single source:
Welding tractor with control unit
alpha Q power source
Welding consumables
Welding torch
Wear parts
Welding accessories
Training and consultancy
 High precision of the orbiting speed,
linear pendular motion with adjustable
frequency and holding times
 Seam can be accessed at any time thanks
to the arrangement of the welding system on the tractor side
 Pipe welding in any position
 Pipe diameters of DN300 and up
pipeTruck MAG orbital system
18
18
EWM AG /// www.ewm-group.com
 Pipes can be welded automatically and in
high quality in all wall thicknesses
MULTIMATRIX
Perfection is the principle
The ewm EN 1090 WPQR Package saves time and money
Advantages of the MULTIMATRIX technology
superPuls
superPuls
 Quick and easy welding of vertical-up welds
without using the "Christmas tree technique"
The superPuls combination of ewm welding processes
offers a multitude of possibilities.
 Effortless mastery of the weld pool
 Performance increase by pressing on the torch
trigger for secure overlaying of tack points
 Extreme low-spatter pulsed arc, also in positional welding
 Reliable fusion of the root base
 Effective filling with pulse
 No more weaving required
 Smooth bead ripples result in aesthetically
pleasing weld seams
 Controlled reduced heat input
 Reduced spatter formation
 Easy modelling of the molten metal
 Quick and reliable welding of vertical-up welds
without using the "Christmas tree technique"
Aluminium superPuls
PF position
The "Christmas tree technique", an application normally reserved for true experts, can
be avoided, which is advantageous for less
experienced staff.
CrNi superPuls
PF position
/// Perfection is the principle
Steel superPuls
PF position
EWM AG /// www.ewm-group.com
19
MULTIMATRIX
Perfection is the principle
forceArc
forceArc puls
Pulsed arc
Standard arc
Pulsed arc: Controlled, short circuit-proof pulsed arc
for all positions
Heat-reduced, directionally stable and powerful arc with
deep penetration for the upper power range.
Standard arc: Controlled short arc far into the
transitional area
Non-alloyed, low-alloy and high-alloy steels and high-tensile
fine-grained steels
forceArc
forceArc puls
Standard arc
Pulsed arc
Cost savings thanks to
reduced weld volume




Reduced energy costs




Penetration depth




Reduced heat input




Arc force




Directionally stable arc




Minimised spatter formation




Reduced undercuts




Highly dynamic current control




Reduced emissions/
less welding fumes




Unalloyed and low-alloy steels
Yes
Yes
Yes
Yes
High-alloy steels
Yes
Yes
No
Yes
High-tensile fine-grained steels
Yes
Yes
No
Yes
Aluminium
Yes
Yes
No
Yes
Copper
No
Yes
No
Yes
Applications

Good
20
EWM AG /// www.ewm-group.com


Excellent
MULTIMATRIX
Perfection is the principle
coldArc
coldArc puls
rootArc
rootArc puls
coldArc: Heat-reduced, low-spatter short arc for
high dimensional stability welding and brazing,
plus root welding with excellent gap bridging
capabilities.
rootArc: Short arc with perfect weld modelling capabilities for effortless gap bridging and positional
welding
coldArc puls: The optimum enhancement for the
higher performance range, with focused heat
input – there where the heat is required.
rootArc puls: The perfect enhancement for
focused heat input for the higher performance
range
pipeSolution
Powerful arc for rapid, secure welding
with and without gap in all positions.
coldArc
coldArc puls
rootArc
rootArc puls
pipeSolution
Reduced heat input/
less distortion





Reduced energy costs





Minimised spatter formation/
less finishing work





Gap bridging





Reduced harmful emissions/
less welding fumes










Good root formation





Root welding in any position





Thin panel welding





Unalloyed and low-alloy steels
Yes
Yes
Yes
Yes
Yes
High-alloy steels
Yes
Yes
Yes
Yes
Yes
High-tensile fine-grained steels
Yes
Yes
Yes
Yes
Yes
Brazing (CuSi, CuAl)
Yes
Yes
No
Yes
No
Brazing (zinc wire ZnAl)
Yes
No
No
No
No
Dissimilar joint, aluminium with
galvanised steel panel (braze welding)
Yes
Yes
No
Yes
No
Arc force
Applications

Good


Excellent
EWM AG /// www.ewm-group.com
21
MULTIMATRIX
Network software ewm Xnet 1.0
MULTIMATRIX – ewm Xnet 1.0 network software
Recording, analysing – optimising, profiting
Take advantage of the full potential of the innovative ewm welding processes. With the ewm Xnet 1.0 network software you
can analyse all welding data in real-time – from welding voltage to the gas consumption. This way you immediately detect
disruptive factors, such as false parameters, thus preventing
production downtime and increasing economic efficiency and
your production volumes in the process chain.
Usable for:
alpha Q puls
Phoenix puls
Taurus Synergic S
Tetrix
Functions/options
⁄
Recording of welding data
⁄
Centrally save, view and analyse
⁄
Online monitoring – control and monitor the welding
process of any number of machines from any number of
PC workstations
⁄
Job (welding task) management – creation, administration
and archiving of welding jobs, both online and offline
⁄
Access to all systems and functionalities ewm Xnet 1.0,
PC 300, Q-DOC, Config
⁄
Option of transferring to all welding machines in the
network
⁄
Online analysis, evaluation, reporting and documentation of recorded welding parameters for each networked
welding machine, by means of various documentation and
analysis tools
⁄
Convenient and easy to create graphic arrangement of the
welding machines of network participants, based on work
facility diagrams; can be enlarged by zooming, navigation
window and much more
For information on the topic of networking ewm welding machines, please
consult the brochure „Administrator Software ewm Xnet 1.0“.
22
EWM AG /// www.ewm-group.com
MULTIMATRIX
Perfection is the principle
Advantages of the MULTIMATRIX technology
The compact solution
PC
 Client
 Server
 Log server
The standard solution
PC
PC
PC
 Client
Server PC
 Client
PC
 Log
server
 Client
 Client

Ideal for single-shift production environments and
companies with up to about 15 machines.

Service personnel, welding supervisor

Occasional recording, reviewing and analysing of welding
data, as well as monitoring of the networked equipment.

The computer being used for this should be permanently
switched on to reduce network loads.

The standard solution for companies with up to approx.
60 machines.

Welding supervisors, welding engineers, production
management

Continuous recording, reviewing and analysing of welding data of a large number of machines (TBD),
as well as monitoring of the networked machines.

The server PCs must be permanently switched on.

A high-performance solution for companies with more
than 60 machines.

Welding supervisors, welding engineers, production
management
Server PC
 Server
 Client
PC
The computer used for this does not need to be permanently switched on.
 Client
Server PC
PC

 Log server
The high-performance solution
PC
Occasional recording, reviewing and analysing of welding
data, as well as monitoring of the networked equipment.
 Server
 Client
PC

/// Perfection is the principle
 Client
Server PC
 Log
server
 = Software
EWM AG /// www.ewm-group.com
23
MULTIMATRIX
Perfection is the principle
alpha Q 330 puls TKM
Welding processes
MIG/MAG
MIG/MAG pulse
TIG
MMA
coldArc / coldArc puls
forceArc / forceArc puls
rootArc / rootArc puls
pipeSolution
superPuls
Controls /
Network
Expert 2.0
Expert 2.0 LAN/WLAN
Progress
LAN/WLAN Retrofitting ex works
LAN/WLAN Remote control
Technical data
Welding range
•
•
•
•
•/•
•/•
•/•
•
•
–
–
•
–
•
alpha Q 330 puls
5 A – 330 A
Duty cycle
Current at 100 %
Current at 60 %
Duty cycle at max current
Mains voltage (tolerances)
50 Hz/60 Hz
Mains fuses (slow-blow)
Dimensions machine LxWxH [mm]
Weight machine
Dimensions wire feeder LxWxH [mm]
Weight wire feeder
Dimensions cooling unit LxWxH [mm]
Weight cooling unit
24
EWM AG /// www.ewm-group.com
210 A
270 A
40 % / 330 A
3 x 400 V
(-25 % - +20 %)
3 x 16 A
685 x 335 x 750
64 kg
–
–
685 x 335 x 255
34 kg
MULTIMATRIX
Perfection is the principle
alpha Q 351/551 puls FDW
•
•
•
•
•/•
•/•
•/•
•
•
•
•
•
•
•
alpha Q 351 puls
alpha Q 551 puls
5 A – 350 A
5 A – 550 A
350 A
100 %
420 A
550 A
60 %
3 x 400 V
(-25 % - +20 %)
3 x 25 A
1100 x 455 x 1000
135 kg
660 x 280 x 390
13 kg
–
–
3 x 400 V
(-25 % - +20 %)
3 x 35 A
1100 x 455 x 1000
138.5 kg
660 x 280 x 390
13 kg
–
–
EWM AG /// www.ewm-group.com
25
MULTIMATRIX
Perfection is the principle
Welding processes
MIG/MAG
MIG/MAG pulse
TIG
MMA
coldArc / coldArc puls
forceArc / forceArc puls
rootArc / rootArc puls
pipeSolution
superPuls
Controls /
Network
Expert 2.0
Expert 2.0 LAN/WLAN
Progress
LAN/WLAN Retrofitting ex works
LAN/WLAN Remote control
Technical data
Welding range
Phoenix 355 puls TKM
Phoenix 355/405/505 puls TDM
•
•
•
•
•
•
•
•
–/–
•/•
•/•
–
•
–/–
•/•
•/•
–
•
–
–
•
–
•
•
•
•
•
•
Phoenix 355 puls
Phoenix 355 puls
Phoenix 405 puls
Phoenix 355 puls
5 A – 350 A
5 A – 350 A
5 A – 400 A
5 A – 500 A
270 A
300 A
40 % / 350 A
300 A
350 A
60 %
400 A
100 %
430 A
500 A
60 %
3 x 400 V
(-25 % - +20 %)
3 x 16 A
625 x 300 x 480
33 kg
–
–
610 x 300 x 330
16.5 kg
3 x 400 V
(-25 % - +20 %)
3 x 16 A
624 x 300 x 535
41 kg
660 x 280 x 390
13 kg
610 x 300 x 330
16.5 kg
3 x 400 V
(-25 % - +20 %)
3 x 35 A
624 x 300 x 535
41 kg
660 x 280 x 390
13 kg
610 x 300 x 330
16.5 kg
3 x 400 V
(-25 % - +20 %)
3 x 35 A
624 x 300 x 535
45 kg
660 x 280 x 390
13 kg
610 x 300 x 330
16.5 kg
Duty cycle
Current at 100 %
Current at 60 %
Duty cycle at max current
Mains voltage (tolerances)
50 Hz/60 Hz
Mains fuses (slow-blow)
Dimensions machine LxWxH [mm]
Weight machine
Dimensions wire feeder LxWxH [mm]
Weight wire feeder
Dimensions cooling unit LxWxH [mm]
Weight cooling unit
26
EWM AG /// www.ewm-group.com
MULTIMATRIX
Perfection is the principle
Phoenix 401/501 puls FKW
Phoenix 351/401/451/551 puls FDW
•
•
•
•
•
•
•
•
–/–
•/•
•/•
–
•
–/–
•/•
•/•
–
•
–
–
•
–
•
•
•
•
•
•
Phoenix 401 puls
Phoenix 501puls
Phoenix 351 puls
Phoenix 401 puls
Phoenix 451 puls
Phoenix 551puls
5 A – 400 A
5 A – 500 A
5 A – 350 A
5 A – 400 A
5 A – 450 A
5 A – 550 A
400 A
100 %
430 A
500 A
60 %
350 A
100 %
400 A
100 %
420 A
80 % / 450 A
420 A
550 A
60 %
3 x 400 V
(-25 % - +20 %)
3 x 35 A
1100 x 455 x 1000
119.5 kg
–
–
–
–
3 x 400 V
(-25 % - +20 %)
3 x 35 A
1100 x 455 x 1000
119.5 kg
–
–
–
–
3 x 400 V
(-25 % - +20 %)
3 x 25 A
1100 x 455 x 1000
129 kg
660 x 280 x 390
13 kg
–
–
3 x 400 V
(-25 % - +20 %)
3 x 35 A
1100 x 455 x 1000
118 kg
660 x 280 x 390
13 kg
–
–
3 x 400 V
(-25 % - +20 %)
3 x 35 A
1100 x 455 x 1000
129 kg
660 x 280 x 390
13 kg
–
–
3 x 400 V
(-25 % - +20 %)
3 x 35 A
1100 x 455 x 1000
129 kg
660 x 280 x 390
13 kg
–
–
EWM AG /// www.ewm-group.com
27
MULTIMATRIX
Perfection is the principle
Taurus 355 Synergic S TKM
Welding processes
MIG/MAG
MIG/MAG pulse
TIG
MMA
coldArc / coldArc puls
forceArc / forceArc puls
rootArc / rootArc puls
pipeSolution
superPuls
Controls /
Network
Synergic S
LAN/WLAN Retrofitting ex works*
LAN/WLAN Remote control*
Taurus 355/405/505 Synergic S TDM
•
–
•
•
•
–
•
•
–/–
•/–
•/–
–
•
–/–
•/–
•/–
–
•
•
–
•
•
•
•
* Synergic S only
Technical data
Taurus 355
Taurus 355
Taurus 405
Taurus 355
Welding range
5 A – 350 A
5 A – 350 A
5 A – 400 A
5 A – 500 A
270 A
300 A
40 % / 350 A
300 A
350 A
60 %
400 A
100 %
430 A
500 A
60 %
3 x 400 V
(-25 % - +20 %)
3 x 16 A
625 x 300 x 480
33 kg
–
–
610 x 300 x 330
16.5 kg
3 x 400 V
(-25 % - +20 %)
3 x 16 A
624 x 300 x 535
41 kg
660 x 280 x 390
13 kg
610 x 300 x 330
16.5 kg
3 x 400 V
(-25 % - +20 %)
3 x 35 A
624 x 300 x 535
41 kg
660 x 280 x 390
13 kg
610 x 300 x 330
16.5 kg
3 x 400 V
(-25 % - +20 %)
3 x 35 A
624 x 300 x 535
45 kg
660 x 280 x 390
13 kg
610 x 300 x 330
16.5 kg
Duty cycle
Current at 100 %
Current at 60 %
Duty cycle at max current
Mains voltage (tolerances)
50 Hz/60 Hz
Mains fuses (slow-blow)
Dimensions machine LxWxH [mm]
Weight machine
Dimensions wire feeder LxWxH [mm]
Weight wire feeder
Dimensions cooling unit LxWxH [mm]
Weight cooling unit
28
EWM AG /// www.ewm-group.com
MULTIMATRIX
Perfection is the principle
Taurus 401/501 Synergic S FKW
Taurus 351/401/451/551 Synergic S FDW
•
–
•
•
•
–
•
•
–/–
•/–
•/–
–
•
–/–
•/–
•/–
–
•
•
–
•
•
•
•
Taurus 401
Taurus 501
Taurus 351
Taurus 401
Taurus 451
Taurus 551
5 A – 400 A
5 A – 500 A
5 A – 350 A
5 A – 400 A
5 A – 450 A
5 A – 550 A
400 A
100 %
430 A
500 A
60 %
350 A
100 %
400 A
100 %
420 A
80 % / 450 A
420 A
550 A
60 %
3 x 400 V
(-25 % - +20 %)
3 x 35 A
1100 x 455 x 1000
119.5 kg
–
–
–
–
3 x 400 V
(-25 % - +20 %)
3 x 35 A
1100 x 455 x 1000
119.5 kg
–
–
–
–
3 x 400 V
(-25 % - +20 %)
3 x 25 A
1100 x 455 x 1000
129 kg
660 x 280 x 390
13 kg
–
–
3 x 400 V
(-25 % - +20 %)
3 x 35 A
1100 x 455 x 1000
118 kg
660 x 280 x 390
13 kg
–
–
3 x 400 V
(-25 % - +20 %)
3 x 35 A
1100 x 455 x 1000
129 kg
660 x 280 x 390
13 kg
–
–
3 x 400 V
(-25 % - +20 %)
3 x 35 A
1100 x 455 x 1000
129 kg
660 x 280 x 390
13 kg
–
–
EWM AG /// www.ewm-group.com
29
Welding machines
MMA DC welding processes
Extremely resilient
For all climatic zones, from the desert to Antarctica
Pico 350 cel puls / Pico 350 cel puls PWS
MMA
Resistant against cold, heat, rain or dirt, enormously rugged for the toughest
usage and, thanks to low weight, ideal for changing deployment locations!
MAG CC CV
TIG (lift arc)
100% safe for vertical-down welding of CEL electrodes
MAG welding with Pico drive 4L wire feed unit
Especially durable
/
Highly practical
Production-standard control
panel protective cover
/
/
Polarity-reversing device
/
IP 34s protection
Integrated as standard equipment
(PWS version)
/
Best protection
/
/
Rugged carrying handle with
shoulder strap
Production-standard mains
cable bracket
All-round protection
against splash water
For tough jobs
Protection against the ingress
of foreign objects
Insertable protective dust filter
(optional)
/
/
Secure penetration depth when
placed in accumulated water
Especially solidly-designed base
+
Pico 350 cel puls
with E 1.01 control unit
(MMA Pro)
30
EWM AG /// www.ewm-group.com
Pico 350 cel puls PWS
with E 1.00 control unit
(MMA Pro PWS)
Selectable polarity
Pico drive 4L
Versatile usage thanks to MAG CC-CV for
MAG welding and self-shielding for flux
cored wire
Welding machines
MMA DC welding processes
Advantages of the Pico 350 cel puls /PWS
Built for the most extreme demands
 Inspected protection against splash water (IP 34s)
 Ruggedly-designed base enables placement in dirty and
wet environments
 No ingress of accumulated water
 Durability because of replaceable filters
 3-year guarantee, without any performance restrictions,
also for 3-shift, 24-hour/7-day operations
 5-year guarantee for transformer and rectifier
Maximum functionality – easiest operation
 Polarity can be reversed by pressing a button (PRS)
 Energy efficient due to standby mode
 Easiest operation, also for novices, thanks to self-explanatory, clearly-arranged user interface
Extra strong for large electrodes
 For electrodes up to 8 mm
 Ideally suited for CEL electrodes up to 6 mm
 Ideal for vertical-up welds and pipe welding
Vertical-down weld PG
Very easy vertical-up and vertical-down welds
 100% reliable vertical down welding
 Perfect electrode vertical-up welding
through PF pulse function
 Pulsing (MMA pulsing)
 Automated pulsing
For all climatic zones
 Temperature range of operating machines:
-25 °C to +40 °C
 Temperature range for transport and storage:
-30 °C to +70 °C
 Thanks to 100% generator compatibility
 High mains voltage tolerances (-25% to +20%)
 Standard-series VRD
ax
.
20
0
m
Can be deployed around the world
m
Vertical-up weld PF
EWM AG /// www.ewm-group.com
31
MMA
Technical data
Pico 350 cel puls
Welding processes
MMA
MIG/MAG (CC/CV)
TIG
Controls /
Functions
•
•
•
MMA pro
MMA pro PWS
•
–
cel
puls
pws (integrated Polarity-reversing device)
•
•
–
Technical data
Welding range
Pico 350 cel puls
10 A – 350 A
Duty cycle
Current at 100 %
Current at 60 %
Duty cycle at max current
Mains voltage (tolerances)
50 Hz/60 Hz
Mains fuses (slow-blow)
Dimensions machine LxWxH [mm]
Weight machine
Dimensions wire feeder LxWxH [mm]
Weight wire feeder
32
EWM AG /// www.ewm-group.com
230 A
280 A
35 % / 350 A
3 x 400 V
(-25 % - +20 %)
3 x 25 A
600 x 205 x 415
21 kg
–
–
MMA
Technical data
Pico 350 cel puls PWS
•
•
•
•
•
•
•
•
Pico 350 cel puls pws
10 A – 350 A
230 A
280 A
35 % / 350 A
3 x 400 V
(-25 % - +20 %)
3 x 25 A
600 x 205 x 415
23.5 kg
–
–
EWM AG /// www.ewm-group.com
33
A new dimension of welding
/// Perfection is the principle
Everything from a single source...
... the whole world of welding in digital form!
If your CD-ROM is missing please let us know.
You can order the CD-ROM quoting item number
WM.0868.00
All information can also be found on the internet at
www.ewm-group.com
The CD-ROM contains information on:
⁄⁄
ewm products
⁄⁄
Welding dictionary
⁄⁄
BlueEvolution
⁄⁄
Arc films
⁄⁄
MULTIMATRIX
⁄⁄
And much more
⁄⁄
Innovative welding processes
All information can also be found on the internet at www.ewm-group.com
Headquarters
Technology centre
EWM AG
Dr. Günter-Henle-Straße 8
56271 Mündersbach · Germany
Tel: +49 2680 181-0 · Fax: -244
www.ewm-group.com · info@ewm-group.com
EWM AG
Forststraße 7-13
56271 Mündersbach · Germany
Tel: +49 2680 181-0 · Fax: -144
www.ewm-group.com · info@ewm-group.com
Production, Sales and Service
EWM HIGHTEC WELDING AUTOMATION GmbH
Boxbachweg 4
08606 Oelsnitz/V. · Germany
Tel: +49 37421 20-300 · Fax: -318
www.ewm-automation.de · info@ewm-automation.de
EWM AG
Dr. Günter-Henle-Straße 8
56271 Mündersbach · Germany
Tel: +49 2680 181-0 · Fax: -244
www.ewm-group.com · info@ewm-group.com
EWM HIGHTEC WELDING (Kunshan) Ltd.
10 Yuanshan Road, Kunshan · New & High-tech Industry Development Zone
Kunshan · Jiangsu · 215300 · People´s Republic of China
Tel: +86 512 57867-188 · Fax: -182
www.ewm-kunshan.cn · info@ewm-kunshan.cn
Sales and Service Germany
EWM AG
Vertriebs- und Technologiezentrum
Grünauer Fenn 4
14712 Rathenow · Tel: +49 3385 49402-0 · Fax: -20
www.ewm-rathenow.de · info@ewm-rathenow.de
EWM HIGHTEC WELDING GmbH
Vertriebs- und Technologiezentrum
Draisstraße 2a
69469 Weinheim · Tel: +49 6201 84557-0 · Fax: -20
www.ewm-weinheim.de · info@ewm-weinheim.de
EWM HIGHTEC WELDING GmbH
Lindenstraße 1a
38723 Seesen-Rhüden · Tel: +49 5384 90798-0 · Fax: -20
www.ewm-seesen.de · info@ewm-seesen.de
EWM Schweißtechnik Handels GmbH
Bildstock 9/3-4
88085 Langenargen · Tel: +49 7543 9344-30 · Fax: -50
www.ewm-langenargen.de · info@ewm-langenargen.de
EWM HIGHTEC WELDING GmbH
Sachsstraße 28
50259 Pulheim · Tel: +49 2234 697-047 · Fax: -048
www.ewm-pulheim.de · info@ewm-pulheim.de
EWM Schweißtechnik Handels GmbH
Rittergasse 1
89143 Blaubeuren · Tel: +49 7344 9191-75 · Fax: -77
www.ewm-blaubeuren.de · info@ewm-blaubeuren.de
EWM HIGHTEC WELDING GmbH
Vertriebs- und Logistikzentrum
Sälzerstraße 20a
56235 Ransbach-Baumbach · Tel: +49 2623 9276-0 · Fax: -244
www.ewm-ransbach-baumbach.de · info@ewm-ransbach-baumbach.de
EWM Schweißtechnik Handels GmbH
Heinkelstraße 8
89231 Neu-Ulm · Tel: +49 731 7047939-0 · Fax: -15
www.ewm-neu-ulm.de · info@ewm-neu-ulm.de
EWM HIGHTEC WELDING GmbH
Eiserfelder Straße 300
57080 Siegen · Tel: +49 271 3878103-0 · Fax: -9
www.ewm-siegen.de · info@ewm-siegen.de
EWM HIGHTEC WELDING AUTOMATION GmbH
Steinfeldstraße 15
90425 Nürnberg · Tel: +49 911 3841-727 · Fax: -728
www.ewm-automation.de · info@ewm-automation.de
Sales and Service International
EWM HIGHTEC WELDING GmbH
Fichtenweg 1
4810 Gmunden · Austria · Tel: +43 7612 778 02-0 · Fax: -20
www.ewm-gmunden.at · info@ewm-gmunden.at
EWM HIGHTEC WELDING (Kunshan) Ltd.
10 Yuanshan Road, Kunshan · New & High-tech Industry Development Zone
Kunshan · Jiangsu · 215300 · People´s Republic of China
Tel: +86 512 57867-188 · Fax: -182
www.ewm-kunshan.cn · info@ewm-kunshan.cn
Plants
Branches
EWM HIGHTEC WELDING UK Ltd.
Unit 2B Coopies Way · Coopies Lane Industrial Estate
Morpeth · Northumberland · NE61 6JN · Great Britain
Tel: +44 1670 505875 · Fax: -514305
www.ewm-morpeth.co.uk · info@ewm-morpeth.co.uk
EWM HIGHTEC WELDING Sales s.r.o. / Prodejní a poradenské centrum
Tyršova 2106
256 01 Benešov u Prahy · Czech Republic
Tel: +420 317 729-517 · Fax: -712
www.ewm-benesov.cz · info@ewm-benesov.cz
More than 300 ewm sales partners worldwide
/// www.ewm-group.com
Rathenow
ewm worldwide
Seesen
Czech Republic
Benešov u Prahy
Pulheim
People‘s Republic of China
Kunshan
Siegen
Mündersbach
Austria
Gmunden
Oelsnitz
Ransbach-Baumbach
Weinheim
Blaubeuren
Great Britain
Morpeth
Nürnberg
Neu-Ulm
Langenargen
Plants
Branches
Sales partners
Headquarters
Technology centre
Sales and Logistics Centre
EWM AG
Dr. Günter-Henle-Straße 8
D–56271 Mündersbach
Tel: +49 2680 181-0 · Fax: -244
www.ewm-group.com
info@ewm-group.com
EWM AG
Forststr. 7-13
D–56271 Mündersbach
Tel: +49 2680 181-0 · Fax: -244
www.ewm-group.com
info@ewm-group.com
EWM HIGHTEC WELDING GmbH
Sälzerstr. 20a
56235 Ransbach-Baumbach
Tel: +49 2623 9276-0 · Fax: -244
www.ewm-sales.com
info@ewm-sales.com
Visit us!
Sales / Consultancy / Service
© EWM AG / WM.857.01 / 09.2013 / Subject to change without notice.
More than 300 ewm sales partners worldwide – we are always close to you.
36