S-4000S-4000 S-4000S-0040 Port 1: Port

40 INUTS
S-4000S-4000
Port 1: Port-based
VLAN = 101
Port 1: Port-based
VLAN = 101
S-4000S-0040
40 OUTPUTS
Port 2: Port-based
VLAN = 102
S-4000S-4000
40 OUTPUT
S-4000S-0040
Port 2: Port-based
VLAN = 102
Port 8: Tagged
VLAN = 101 & 102
Smart Switch B
40 INPUTS
Port 1 and 2 dedicated to separate REAC networks (VLANs 101 and 102)
with port 3 (VLAN 103) being a combination of both VLANs tagged.
Set up 3 VLANs: One for each REAC network and one to group the two.
Two separate REAC networks are running but the smart switches have the ability to amalgamate multiple REAC networks
down one physical CAT6 cable and separate out again at the other end. Setting up additional ports on the switch as
“seeing” a specific VLAN allows normal splits to occur.
1. Using a gigabit smart switch, create a VLAN for each REAC network/path.
2. Create an additional VLAN assigned to a specific port that consists of tagged VLANs defined in step 1.
3. Setup the second smart switch with the same configuration.
Using VLAN technology, a single Cat6 cable can be used to transfer 40 inputs and 40 outputs between two points using
Roland Digital Snakes.
Port 8: Tagged
VLAN = 101 & 102
Smart Switch A
Create a 40x40 Digital Snake using VLAN