TX-NR636
AV RECEIVER
Basic Manual
„ Advanced Manual found here
http://www.onkyo.com/manual/txnr636upg/adv/en.html
En
Before Start
Advanced Manual
Advanced Manual is always updated with the latest
information and its user friendly interface, which does not
matter whether you access from PC or Smartphone, helps
you to understand more deeply about the AV Receiver.
Advanced Manual is consisted of the following chapters.
AM/FM Radio Receiving Function
Playing Music Files on a USB Storage Device
Listening to Internet Radio
Playing Music with DLNA
Playing Music Files in a Shared Folder
Operating Music Files with the Remote Controller
Listening Mode
Advanced Settings
Operating Other Components with the Remote Controller
Advanced Speaker Connection
Connecting and Operating Onkyo RI Components
Firmware Update
Troubleshooting
Reference Information
Advanced Manual found here
http://www.onkyo.com/manual/txnr636upg/adv/en.html
2
Supplied Accessories
Indoor FM antenna --- (1)
AM loop antenna --- (1)
Color labels for speaker cable --- (1)
Speaker Cable
1
Equipped with 7 channel amplifier
Supports playback in Dolby Atmos format which provides
360-degree placement and movement of sounds
including overhead sound
Dolby Surround listening mode expands 2 ch, 5.1 ch or
7.1 ch source to available speaker configurations
Incorporates Qdeo™ technology for HDMI video
upscaling
Equipped with 4K/60 Hz Passthrough-compatible HDMI
IN/OUT jacks (IN1 to IN4 of HDMI IN jacks are 4K
compatible)
Supports the HDMI Through function which allows
transmission from playback devices to the TV in standby
state
Supports HDCP2.2, a strict copy-protection for providing
high quality content (HDMI IN3/HDMI OUT MAIN only)
Supports ARC (Audio Return Channel)
Supports USB storage playback
Supports variety of network functions such as Internet
Radio, DLNA, etc.
Supports Wi-Fi, Bluetooth and MHL-enabled mobile
device
Bi-Amping capability
A/V Sync Control Function to correct deviation of audio and
video
Multi-zone function which allows you to play a different
source in another room from the main room
32 bit DSP (Digital Signal Processor) with excellent
calculation performance
Music Optimizer™ for Compressed Digital Music files
Phase Matching Bass System
Automatic speaker setup available using supplied
calibrated microphone (AccuEQ Room Calibration)
Supports playback of MP3, WMA, WMA Lossless, FLAC,
WAV, Ogg Vorbis, Apple Lossless, DSD, Dolby TrueHD
via network and USB storage device (the supported
formats will differ depending on the use environment)
2
Features
The Basic Manual leads you through the fundamental steps
to enjoy the AV Receiver from connections to TV, speaker
system and playback components, to necessary functions
for playback. As well as that, Basic Manual informs you with
the instructions on frequently used functions. Besides, there
is another part of the manual called Advanced Manual to
inform you with more detailed information, which we have
decided to publish on the web from the ecological point of
view.
3
About the Basic Manual
Remote controller (RC-880M) --- (1)
Batteries (AA/R6) --- (2)
Power cord (Taiwanese models) --- (1)
Speaker setup microphone --- (1)
The number in parenthesis indicates the quantity. On packaging, the
¼
letter at the end of the product name indicates the color.
How to use the remote controller
Remote control sensor
AV Receiver
Batteries (AA/R6)
Approx.
16 ft. (5 m)
If you do not use the remote controller for a long time, remove the
¼
batteries to prevent leakage.
Note that keeping consumed batteries inside may cause corrosion
¼
resulting in damage of the remote controller.
Step 1: Connections
TV
Personal computer
HDMI
IN
HDMI
OUT
HDMI cable
To use the ARC function, connect to the ARC compatible HDMI
jack of the TV and make an appropriate setting on the unit. See the
section 2 "2nd Step : Source Connection" of "Step 2: Setting Up".
HDMI
OUT
HDMI
OUT
HDMI
OUT
Game console
1
Set-top box/Digital
video recorder, etc.
Connecting the TV and players
Important: The power cord must be connected only after all
other connections are completed.
HDMI cable connection
The unit has many HDMI jacks on its rear panel and each
of them corresponds to an input selector button of the
same name on the front panel. For example, a Blu-ray
Disc player will be connected to the HDMI IN1 jack and the
BD/DVD button on the front panel will be used to listen to
the playback sound (if the player is CEC compliant, input
will be switched automatically). If you add another Blu-ray
Disc player, you can use any other jack than HDMI IN1. It
HDMI
OUT
Blu-ray Disc/
DVD player
Satellite/Cable
set-top box, etc.
is possible to change assignment of the input jacks and
input selector buttons. For how to make settings, see the
Advanced Manual.
To connect the TV and the unit, connect the HDMI OUT
MAIN jack of the unit and the HDMI IN jack of the TV
using an HDMI cable. With this connection, it becomes
possible to display the setting screen of the unit on the
TV or transmit video/audio signals from the player to the
TV. If your TV supports ARC (Audio Return Channel), it
is possible to play the TV sound with the AV receiver's
speakers with this connection only. If your TV does not
support ARC, you need, in addition to the HDMI OUT MAIN
jack connection, a digital optical cable connection between
the digital audio out optical jack of the TV and the DIGITAL
IN OPTICAL jack of the unit or an analog audio cable
connection between the audio output jack of the TV and the
VIDEO/AUDIO IN TV/CD jack of the unit.
z
Audio connection with a TV not supporting ARC
¼
Select an appropriate
connection for your TV.
TV
DIGITAL
OPTICAL
OUT
AUDIO
OUT
The unit supports the HDMI Through function that allows
transmission from players to the TV even if the unit is in
standby. You have to modify the settings to enable the
input selection link with CEC compliant device, connection
with ARC compatible TV, and HDMI Through function. See
3
Step 1: Connections
the section 2 "2nd Step : Source Connection" of "Step 2:
Setting Up".
To enjoy HDCP2.2 protected video, connect the player to
the HDMI IN3 jack and the TV to the HDMI OUT MAIN jack
of the unit. Your player and TV need to support HDCP2.2.
To play 4K or 1080p video, use the high speed HDMI cable.
Another TV can be connected to the HDMI OUT SUB jack.
To use the function to display the unit's setting screen on
the TV, connect the TV to the HDMI OUT MAIN jack.
It is possible to send video and audio of an MHL-enabled
mobile device by connecting the MHL-enabled mobile device
to the AUX INPUT HDMI/MHL jacks on the front panel.
Connecting Components without HDMI
If your AV component does not have HDMI jack, use an
available jack of your component for cable connection with
this unit. Just as the HDMI jacks, other jacks on this unit
have a preassigned input selector button on the front panel.
See the name of the input selector button shown with the
jack when connecting the device.
1
4
5
„ Audio signal connection
1 Digital connection: Use a digital optical cable
(OPTICAL) or digital coaxial cable (COAXIAL) for
connection with a player.
Digital coaxial cable (COAXIAL)
2 Analog connection: Use an analog audio cable for
connection with a player.
To enjoy multi-zone playback of audio of a CD player or
such other player without HDMI output jack, you need
to use the RCA cable to connect the corresponding
jacks of the player and this unit. For details on the multizone function, see the section 6 "Using the multi-zone
function" of "Step 3: Playing Back”.
Video signals input to the composite video input
jack or the COMPONENT VIDEO IN jacks will be
upconverted to HDMI signals and then output from
the HDMI output jack.
Note that it is not possible to convert digital audio
input signals to analog or vice versa.
Analog audio (RCA) cable
3 Connection with turntable: If it uses an MM type
„ Video signal connection
The unit has a video upconversion function. For details, see
the next section.
4 Use a component video cable to connect a TV
with component video input jacks and a player with
component video output jacks.
Component video cable
Its transmitted video has higher quality than that
¼
of composite video cable.
4
Composite video cable
As the digital in optical jack of the unit has a
¼
cover, push in the cable against the cover as it is
turned inside.
¼
If it uses an MC type cartridge, install an audio equalizer compatible
with MC type cartridge between the unit and the turntable by
connecting it to the 2 TV/CD jack. For details, refer to the turntable's
instruction manual.
¼
If the turntable has a ground wire, connect it to the GND terminal of
this unit. If connecting the ground wire increases noise, disconnect it.
2
composite video input jack or a player with composite
video output jack.
Digital optical cable (OPTICAL)
cartridge and does not have a built-in audio equalizer,
connect it to the 3 PHONO jack. If the connected
turntable has a built-in audio equalizer, connect it to the
2 TV/CD jack.
3
5 Use a composite video cable to connect a TV with
AV Receiver
¼
When you upconvert video signals input to the
COMPONENT VIDEO IN jacks and output them from
the HDMI OUT jack, set the output resolution of the
player to 480i or 576i. If the input has 480p/576p or
higher resolution, a message prompting you to change
the resolution setting will appear. If your player does
not support 480i or 576i output, use the composite
video jack.
¼
If multiple video signal inputs are put into one input
system, the output will be made in the order of HDMI,
COMPONENT VIDEO, and composite video.
Step 1: Connections
2
8F
Connecting speakers
Surround back R/
Height R
#
Front R
Surround back L/
Height L
Front L
$
Speaker layout
If there is only one
surround back
speaker, connect
it to the BACK or
HEIGHT L terminal.
Center
F
9
'
79
"
#
"
&
$
%
8
7
To enjoy the Dolby Atmos listening mode, Height speakers
or Surround Back speakers need to be installed. The
example above uses front Height speakers. As other types
of Height speakers are also applicable, see the next page
for details.
" # Front speakers
Center speakers
$
% & Surround speakers
Subwoofer
'
7 8 Surround back speakers
9 F Height speakers
5.1 ch: " # $ % & '
7.1 ch: " # $ % & ' + 78 or
" # $ % & ' + 9F
78 and 9F share the same speaker
terminals. Select either of the groups.
To use the multi-zone function, see the section 6
"Using the multi-zone function" of "Step 3: Playing
Back".
'
Subwoofer with built-in
power amplifier
&
Surround R
%
Surround L
5
Step 1: Connections
Characteristics of speaker types
" # output front stereo sound. $ outputs center sounds
such as dialogs and vocals. % & create back sound field.
' reproduces bass sounds and creates rich sound field.
Connecting 78 speakers or 9F speakers enables
playback in 7.1 ch configuration. 78 (surround back)
speakers improve sense of envelopment created by back
sound field as well as seamlessness of back sounds,
providing more natural sound experiences in the sound
field. 9F (height) speakers produce surround effects
on a height plane. This unit performs optimal sound field
processing for the type of the installed height speakers
which is registered in initial settings (with setup wizard).
The speaker setting is 7.2 ch at the time of purchase. You
can change it manually or by using automatic speaker
setting.
9
;
<
#=$=
<
cable core to the rear panel of the unit may cause failure.
Also do not connect two or more cables to one speaker
terminal or one speaker to several terminals.
Using a speaker with less impedance than the setting
may result in failure.
Height speakers arrangements
Dolby Laboratories recommends to place the speakers as
described on “Installing speakers in ceiling” to obtain the
best Dolby Atmos effect.
Installing speakers in ceiling
c
d
a b
Instructions on how to connect speakers
Important
You have to change the setting if any of the speakers
up by viewing the guidance displayed on the TV screen.
Select the item with the cursor buttons of the remote
controller and press ENTER to confirm your selection. To
return to the previous screen, press RETURN. Press RCV
and then HOME on the remote controller. Select "Setup"
- "2. Speaker Setup" - "Speaker Settings" - "Speaker
Impedance" and change the default value from "6ohms"
(Default Value) to "4ohms".
1/2"-5/8"(12-15 mm)
Cut and remove the plastic coating from the end of the
speaker cable, twist the core and connect it to the terminal.
Make correct connection between the unit's jacks and
!#
#$
$%&*&
connection is wrong, a bass sound may become poor
due to reverse phase. Attaching the supplied colored
speaker cable labels to the + side on the both ends of each
channel's cable will help correct connection.
Up to two subwoofers with built-in power amplifier can
be connected to the subwoofer jacks. Set the cut-off
filter selection switch of the subwoofer to DIRECT. If the
subwoofer does not have a cut-off filter selection switch
but has a cut-off frequency adjusting dial, turn it to the
maximum frequency. If your subwoofer does not have
builtin power amplifier, you can connect a power amplifier
between the unit and the subwoofer.
6
When using commercially available banana plugs:
tighten the speaker terminals to the end and then insert
the banana plugs. Do not insert the core of speaker cable
directly into the hole for banana plug of speaker terminal.
(North American models)
a b Top Front
c d Top Middle
Ceiling speakers, etc. are used for maximizing effects in
Dolby Atmos or Dolby Surround listening mode. Install
Top Front speakers midway between the position just
above the listening position and the position just above the
front speakers. Install Top Middle speakers just above the
listening position. You can select ab or cd on the unit.
For connection with the unit, use the SPEAKERS BACK or
HEIGHT terminals.
Step 1: Connections
Using Dolby Enabled Speakers
3
Network connection
Other connections
AM/FM antenna connections
Connect the antennas to listen to AM/FM broadcast. When
listening to the broadcast for the first time, adjust the
antenna position and orientation to get the best reception.
You can enjoy Internet radio and DLNA by connecting the
unit to LAN. The unit can be connected to the router with an
Ethernet cable or to the wireless LAN router with Wi-Fi
connection. In case of wired connection, connect the
Ethernet cable to the Ethernet port. See the section 2 "4th
Step : Network Connection" of "Step 2: Setting Up".
Internet radio
AM loop antenna (supplied)
e f Dolby Enabled Speaker (Front)
g h Dolby Enabled Speaker (Surround)
Indoor FM antenna
(supplied)
A Dolby Enabled Speaker is specially designed to be used
as a Height speaker. There are two types of Dolby Enabled
Speakers, the one is to be placed on the top board of other
speakers such as front speakers and surround speakers,
and the other is integrated type with the normal speakers.
Dolby Enabled Speakers designed with their output facing
toward the ceiling to create an elevated audio effect in
the Dolby Atmos and Dolby Surround listening modes by
providing sounds echoing off the ceiling. You can select
ef or gh on the unit. For connection with the unit, use
the SPEAKERS BACK or HEIGHT terminals.
Router
PC
NAS
Fix with a tack on
the wall.
(North American and
Taiwanese models)
(European, Australian
and Asian models)
Assemble the AM loop antenna (supplied).
Headphones connection
<!>?
or ø 6.3 mm) to the PHONES jack on the front panel.
Sound from the speakers will be off while you are using the
headphones.
If you selected any other listening mode than Pure
Audio (European, Australian and Asian models), Stereo,
Mono and Direct, connecting headphones will switch the
listening mode to Stereo.
7
Step 2: Setting Up
Important: When the unit is turned on for the first time, the
setup wizard of the section 2 will automatically be launched.
If you use the setup wizard to make the initial setup,
connect a TV to the HDMI OUT MAIN jack of the unit via
HDMI connection.
1
Turning the power on
Connect the power cord to the outlet. Press zON/
STANDBY on the main unit or zRECEIVER on the remote
controller to turn the unit on or to standby mode.
2
Making the Initial Setup with the Setup
Wizard
Read before starting the procedure: Set up by
answering the guidance displayed on the TV screen.
Select the item with the cursor buttons of the remote
controller and press ENTER to confirm your selection.
To return to the previous screen, press RETURN.
If you terminate the procedure on the way or
change the setting made in the initial setup and
want to call up the setup wizard again, press RCV
and then HOME on the remote controller, select
"Setup" - "7. Hardware Setup" - "Initial Setup", and
press ENTER.
„ 1st Step : AccuEQ Room Calibration
The test tone coming from each speaker will be measured to
enable setting of the number of speakers, volume level, each
speaker's optimum crossover frequencies, and distance from
the primary listening position, and also enable correction of
distortion caused by the room acoustic environment.
Initial Setup
AccuEQ Room Calibration
This step you can automatically calibrate
your room to get correct surround sound.
Would you like to cailbrate your room now
or later?
Do it Now
Do it Later
HOME Exit
Initial Setup
Language Select
English
Select the language first. In the next screen, the summary
of the setup wizard as below will be displayed. Select "Yes"
in this screen and press ENTER on the remote controller.
Deutsch
Français
Español
Italiano
Nederlands
Svenska
HOME Exit
Initial Setup
1. Place the speaker setup microphone.
When the start screen above is displayed, before
starting the procedure, place the supplied speaker setup
microphone at the measurement position  by referring
to the figure below.
Welcome to initial setup. Have you connected all the speakers and devices?
Before starting, please connect speakers and sources.
Now, would you like to start initial setup?
1st Step : AccuEQ Room Calibration
2nd Step : Source Connection
TV
3rd Step : Remote Mode Setup
Taiwanese models include a removable power cord. Connect the power
¼
cord to AC INLET of the unit and then connect to the outlet. Always
disconnect the outlet side first when disconnecting the power cord. When
the unit is turned on, a large instantaneous current may flow affecting
functionality of the computer and other devices. It is recommended to
use a separate outlet from that for the computer or such other sensitive
devices.
Firmware update notification: If the unit is connected
via LAN and there is firmware update available, the
"Firmware Update Available" message will appear. To
execute updating, select "Update Now" with the cursor
buttons of the remote controller and press ENTER. When
"Completed!" appears, press zON/STANDBY on the main
unit to turn the unit into standby mode. Then updating will
be completed.
The unit automatically turns itself into standby mode
Z?
&
[
\[
]*
this case also, updating will be completed.
8
4th Step : Network Connection
Yes
No
HOME
Exit
The setup wizard proceeds in the four steps as below.
„ 1st Step : AccuEQ Room Calibration
„ 2nd Step : Source Connection
„ 3rd Step : Remote Mode Setup
„ 4th Step : Network Connection
:Listening area
:Measurement position
with microphone
Correct measurement will not be possible if the microphone is held by
¼
hand. Measurement is not possible if headphones are being used.
The subwoofer sound may not be detected since it is extremely low
¼
frequencies. Raise the subwoofer volume to around the half of its
maximum volume and make its frequency to the maximum level.
A loud test tone will be heard during measurement. Measurement may
¼
be interrupted if there is ambient noise or radio frequency interference.
Close the window and turn off the home appliance and fluorescent light.
Step 2: Setting Up
2. After placing the microphone at the measurement
position, select "Do it Now" with the cursors and
press ENTER.
3. When "Please plug microphone that came in a
box with AV receiver." is displayed, connect the
microphone to the SETUP MIC jack of the unit.
settings. Press ENTER with "Save" selected. In the next
screen showing that "AccuEQ Room Calibration" is
"On", press ENTER on the remote controller.
If there is an error message, follow the on-screen
instruction to remove the error cause.
7. When "Please unplug setup microphone." is
displayed, disconnect the microphone.
ARC compatible TV, and HDMI Through function. Select
"Yes" with the cursors to enable them or "No, Done
Checking" to skip, and press ENTER on the remote
controller.
6. Select "Yes" with the cursors and press ENTER to
enable the CEC link function or select "No" and
press ENTER to keep it disabled.
SETUP MIC jack
Source Connection
„ 2nd Step : Source Connection
The following CEC-compatible devices are found;
Speaker setup
microphone
You can check whether or not each input source is
connected correctly.
Do you wish to turn on the CEC link?
Integra DHS-8.8
1. When the Source Connection start screen is
displayed, select "Yes, Continue" with the cursors
and press ENTER.
Yes
No
HOME
4. Follow the guidance displayed on the TV screen.
Initial Setup
If you select "Yes", the connection with ARC compatible
TV and HDMI Through function will be set to "Auto" and
enabled.
Source Connection
AccuEQ Room Calibration
This step will start to check if the
Front Speakers Type
Normal
Height Speakers Type
Not Use
Powered Zone 2
No
Subwoofer
Yes
Exi t
connections were made correctly.
Would you like to continue?
„ 3rd Step : Remote Mode Setup
Yes. Continue
No. Skip
HOME
Exit
Set bi-amp only if you use 2 channel amp for each front speaker.
ENTER
2. Select the desired input to check the connection and
When the screen above is displayed, press ENTER
on the remote controller. Confirm the power supply of
subwoofer and press ENTER on the remote controller
inthe next screen. Confirm the position of speaker setup
microphone and press ENTER on the remote controller
in the next screen. Automatic speaker setting starts.
5. The test tones sound from the connected speakers
and automatic speaker setting starts.
Measurement will be made twice for each speaker. It
takes several minutes to be completed. Keep the room
as quiet as possible during measurement. If any of
the speakers do not produce the test tone, check for
disconnection.
During measurement, each speaker outputs the test
tones at a high volume. Be careful of sound leak
that may disturb your neighbors, or be careful not to
frighten young children.
6. When the measurement is completed, the
measurement result is displayed.
Press W/X on the remote controller to check the
Initial Setup
Remote Mode Setup
Next
press ENTER.
Start playback of the selected device. If connection is
correct, video/audio of the input source selected on the
unit will be played.
3. After checking the connection, select "Yes" with the
cursors and press ENTER.
If you select "No" and press ENTER, the error cause
will be displayed. Follow the guidance to remove the
error cause and check the connection again.
4. Select "Yes" with the cursors and press ENTER
on the remote controller to check the connection
of other inputs or select "No, Done Checking" and
press ENTER to skip.
If you select "Yes", you will return to the screen of step 2.
If you select "No, Done Checking", you will proceed to
step 5.
5. Enabling HDMI Linked Operation and Other
Functions
In the next screen, you can enable the HDMI linked
operation with CEC compliant device, connection with
Preprograming remote will give you control
of other devices from AV receiver remote
Would you like to setup your remote to
control your devices? This may take a while
depending on what and how many you have
connected. You can always come back to remote
setup from setup “8-2 Remote Mode Setup”.
Yes
No. Skip
HOME
Exit
In this step, you can enable operation of the other
components using the remote controller of the unit. When
the Remote Mode Setup start screen is displayed, select
"Yes" with the cursors and press ENTER on the remote
controller. Follow the guidance to select the desired
REMOTE MODE button and in the keyboard screen, enter
the first three characters of the brand name of the device
you are going to program (e.g., "ONK" for ONKYO) and
search for the remote control code. The guidance will also
explain how to set the remote controller.
9
Step 2: Setting Up
„ 4th Step : Network Connection
2. Select and set the authentication method.
The "Enter Password" screen, instead of the following
screen, may be displayed automatically if the wireless
LAN router does not have an automatic setting button.
Initial Setup
Network Connection
Do you want to connect network connection?
Wi-Fi Setup
It gives you network services that our AV
receiver support. If you wish to skip this step.
Select the authentication method.
select “No. Skip”.
3. Establish connection.
The connection process starts and the Wi-Fi indicator
on the left of the unit's display starts flashing. When
connection has been established, the Wi-Fi indicator
changes from flashing to staying lit. If the Wi-Fi indicator
does not stay lit, connection has not been established.
Make the setting again. If "Push Button" does not work,
try "Enter Password".
Yes
No. Skip
HOME
Exit
Enter Password
Push Button
You can check the network connection and make the Wi-Fi
setting. When the Network Connection start screen is
displayed, select "Yes" with the cursors and press ENTER
on the remote controller. If you select "Wired" in the next
screen, you can view the LAN cable connection status. To
make the Wi-Fi setting, select "Wireless", press ENTER on
the remote controller and follow the sections below.
Make the following preparations.
Wi-Fi connection requires an access point such as
wireless LAN router (¼). Write down the SSID and
password (key) of the access point if they are shown
in the label of the main body. If the access point has
an automatic setting button (may be called differently
according to the manufacturer), you can set up
without inputting the password. For how to use the
automatic setting button of the access point, refer to
its instruction manual.
The unit supports Wi-Fi connection with 2.4 GHz access
¼
point.
1. Select the SSID of the access point to be connected
with the cursor buttons and press ENTER.
When the SSID of the access point appears on the TV
screen, select the desired access point.
If you changed the initial setting of the access point to
skip password entry, Step 3 starts automatically.
If you changed the initial setting of the access point
to hide the SSID, see "When the access point is not
displayed".
10
PIN code
When the screen above is displayed, select and set one
of the three authentication methods: "Enter Password",
"Push Button" and "PIN code". See below for details of
and how to set each method.
Enter Password: Enter the password of the access point to
establish connection.
1 Select "Enter Password" with the cursor buttons and
press ENTER.
2 Enter the password (¼) on the keyboard screen, select
"OK" with the cursor buttons and press ENTER.
¼
Select "Shift" and press ENTER to toggle between upper and lower
case. Select "" or "" and press ENTER to move the cursor to the
selected direction. Select "Back Space" and press ENTER to delete
the character at the left of the cursor position. To select whether to
mask the password with "¼" or display it in plain text, press D on the
remote control. Press + 10 on the remote controller to enable the
"Shift" function and CLR to delete all the input characters.
3 If the security method of the access point to be
connected is WEP, select "Default Key ID", select "OK"
and press ENTER.
Push Button: Use the automatic setting button of the
access point to establish connection.
1 Select "Push Button" with the cursor buttons and press
ENTER.
2 Hold down the automatic setting button of the access
point for the necessary seconds, select "OK" with the
cursor buttons and press ENTER.
PIN code: Select this method when the automatic setting
button of the access point is beyond the reach. Select "PIN
code" with the cursor buttons and press ENTER to display
the 8-digit PIN code. Register the displayed PIN code to the
access point, select "OK" with the cursor buttons and press
ENTER. For how to register the PIN code to the access
point, refer to its instruction manual.
When the access point is not displayed
Select "Other..." with the c cursor on the remote
controller and press ENTER to display the keyboard
screen. Input the SSID and password. Make the
following settings according to the router setting.
„ WPA/WPA2 method
Select "WPA" or "WPA2" in "Security Method", select
"OK" and press ENTER.
„ WEP method
Select "WEP" in "Security Method" and select
"Default Key ID". Then select "OK" and press ENTER.
If encryption setting has not been made on the
wireless LAN router, select "None" in "Security
Method", select "OK" and press ENTER.
„ Exiting the setup wizard
After finishing the initial setup, keep "Finished" selected
and press ENTER on the remote controller. Connection and
setting of the unit is now completed. See Step 3 and enjoy
your home theater.
Step 3: Playing Back
1
Playing the player and TV
Remote controller parts name
1
1 zRECEIVER button: Turns the unit on or into standby
2
3
mode.
2 RCV button: Switches the remote controller to the
8
mode for operating this unit.
3 REMOTE MODE/INPUT SELECTOR button: Switches
the input to be played.
9
z To control the unit: The remote controller of this unit has
the remote mode function for controlling other devices. You
cannot control this unit when the remote controller is in the
remote mode other than RECEIVER mode (for controlling
this unit). Be sure to press 2 RCV to select the RECEIVER
mode before starting operation.
1. Turn the power on.
Press 1zRECEIVER on the remote controller to turn
the power on.
Switch the input on the TV to that assigned to the
unit. Use the TV's remote controller.
2. Select the input of the unit and start playback on the
player or TV.
Press 3INPUT SELECTOR to which the desired player
has been assigned. Press TV/CD to play the TV's sound.
You can also use the input selector buttons on the main
unit.
Input will automatically be selected if the TV or player
is CEC compliant and connected to the unit with
HDMI cable.
3. Select the desired listening mode.
Press 6 listening mode buttons to switch the mode so
that you can enjoy different listening modes. For details
about the listening modes, see "Listening modes" on the
next page.
4. Adjust the volume with F.
4 Cursor buttons and ENTER button: Moves the cursor
and confirms the selection.
5 Q SETUP button: Displays the Quick Setup menu that
F
6
7
8
4
5
G
H
9
F
G
H
6
I
allows you to set the frequently used functions including
input selection and volume adjustment.
Listening mode buttons: Allows you to select the
listening mode.
DIMMER button: Switches the brightness of the display.
ZONE2 button: For use when the unit is connected with
a pre-main amplifier in a separate room and sound is
played there.
MUTING button: Temporarily mutes audio.
VOLUME buttons: Allows you to adjust the volume. This
button also cancels the muting.
RETURN button: Returns the display to the previous
state.
HOME button: Displays the HOME menu that allows
you to make advanced settings and use Internet radio
and DLNA.
DISPLAY button: Switches the information on the
display.
The buttons other than those above are for operating
other devices.
7
I
11
Step 3: Playing Back
Listening modes
You can select a listening mode from various options such
as Dolby Atmos, Dolby Digital and DTS. Select the desired
mode by switching and listening actual sound in different
modes. The selectable listening modes depend on the
format of the input signals.
MOVIE/TV: You can select a listening mode suitable for
movies and TV programs.
MUSIC: You can select a listening mode suitable for music.
GAME: You can select a listening mode suitable for games.
STEREO: You can select a listening mode for stereo and all
channel stereo sources.
PURE AUDIO (main unit only) (European, Australian
and Asian models): The display and analog video circuits
are cut off to provide purer sound.
For details on the listening modes, see the Advanced
Manual.
"Direct" for playing the input signals as-is
Selecting this mode allows the input signals to be
played as they are. For example, 2 ch signals of music
CD will be played in stereo, 5.1 ch signals in 5.1 ch,
and Dolby Digital signals of blu-ray disc or DVD in the
Dolby Digital sound field according to the specified
number of channels.
Other useful functions
„ Playing Video and Audio from Different Sources: It
is possible to play audio and video from different sources.
For example, you can play audio from the CD player and
video from the BD/DVD player. In this case, press BD/DVD
and then TV/CD. Then start playback on the BD/DVD player
and CD player. This function is effective when an input with
audio only has been selected (TV/CD, TUNER or PHONO
in the initial setting).
„ Adjusting Sound Quality: It is possible to enhance
or moderate the low and high pitched ranges of front
speakers. Press TONE on the main unit several times to
select the desired setting from "Bass", "Treble" and "Phase
_
<`[{
#>$
It cannot be set if the listening mode is Pure Audio
(European, Australian and Asian models) or Direct.
12
"Bass": Allows you to enhance or moderate the low
pitched range.
"Treble": Allows you to enhance or moderate the high
pitched range.
"Phase Matching Bass": Allows you to keep the clear
midrange and effectively enhance the low pitched range.
„ Muting Temporarily: Press MUTING on the remote
controller. To cancel the muting, press MUTING again, or
press VOL j/l.
„ Changing the Display Brightness: Press DIMMER on
the remote controller. The display brightness changes each
time you press the button.
„ Checking the Input Format: Press DISPLAY on the
remote controller several times to switch the display of the
main unit in order of:
2
Listening to AM/FM Radio
The Basic Manual explains the method using automatic
tuning. For manual tuning, see the Advanced Manual.
1. Press TUNER on the main unit several times to
select either "AM" or "FM".
2. Press TUNING MODE on the unit, so that the "AUTO"
indicator on the display lights.
3. Press TUNING on the unit.
The automatic tuning to a radio station starts. Searching
stops when one is tuned. When tuned into a radio
station, the " TUNED " indicator on the display lights.
The "FM STEREO" indicator lights if the radio station is
an FM radio station.
TUNED
AUTO
Input source &
volume
FM STEREO
Listening mode
(Actual display varies depending on the country.)
Registering an AM/FM Radio Station: It allows you to
register up to 40 of your favorite AM/FM radio stations.
Signal format
Sampling
frequency
Input signal
resolution
Output resolution
If "Dolby D 5.1" is displayed in signal format, the
Dolby Digital 5.1 ch signals are being input. When
listening to AM/FM radio, the band, frequency and
preset number are displayed.
1. Tune into the AM/FM radio station you want to
register.
2. Press MEMORY on the unit.
The preset number on the display flashes.
3. Repeatedly press PRESET on the unit to select
a number between 1 and 40 while the preset number
is flashing (about 8 seconds).
4. Press MEMORY on the unit again.
When registered, the preset number stops flashing.
To select a preset radio station, press PRESET
}#>$
Step 3: Playing Back
3
Connecting and playing the Bluetoothenabled device
You can wirelessly enjoy music files stored in a smartphone
or other Bluetooth-enabled device. The coverage area is
~?&
!
%
It may take about a minute until connection is established
when the unit is on since the Bluetooth function takes
some time to start up.
If the volume setting on the Bluetooth-enabled device is
low, the sound will not be output from this unit.
Due to the characteristics of Bluetooth wireless
technology, the sound produced on this unit may slightly
be behind the sound played on the Bluetooth-enabled
device.
4
The Bluetooth-enabled device needs to support the
A2DP profile.
Note that connection is not always guaranteed with all
Bluetooth-enabled devices.
Pairing
Pairing is necessary when using the Bluetooth-enabled
device for the first time. Before starting the procedure, learn
how to enable the Bluetooth setting function and to connect
with other devices on the Bluetooth-enabled device.
1. Press BLUETOOTH on the remote controller.
The unit enters the pairing mode and the BLUETOOTH
indicator starts flashing.
2. While the BLUETOOTH indicator is flashing,
complete connection on the Bluetooth-enabled
device in the nearby area within about 2 minutes.
If the name of this unit is displayed on the Bluetoothenabled device's display, select this unit. Paring will end
after a short time.
If a password is requested, enter "0000".
When connecting the unit to any other Bluetoothenabled device, start pairing by pressing and holding
BLUETOOTH until the BLUETOOTH indicator starts
flashing. This unit can store the data of up to eight
paired devices.
Playing sound of the Bluetooth-enabled device
If the unit is on and the Bluetooth-enabled device is
connected, the input will be automatically switched to
BLUETOOTH. Play music in this state.
Using the HOME menu
In the HOME menu, you can make advanced settings and
use Internet radio and DLNA. For details on the operation,
see the Advanced Manual.
1. After pressing RCV, press HOME on the remote
controller.
The HOME menu is displayed on the TV screen. You can
also use the HOME button on the main unit.
1080p or higher resolution is not supported.
„ Setup: You can change the assignment of input terminals
and input selector buttons and also make various speaker
settings and other advanced settings.
„ Network Service: Select to use Internet radio services
and the DLNA function. When you connect the unit to the
network and press ENTER, the network service screen
will be displayed on the TV. On the TV screen, select the
desired service or music file with the cursors of the remote
controller and press ENTER to confirm and start playback.
Internet radio service: You can listen to TuneIn or such
other Internet radio stations registered in advance.
DLNA : You can play music files stored in the PC or
NAS device connected to the network. Select the server
with the cursors, select the desired music file and press
ENTER to start playback.
Home Media: You can play music files in a shared folder
on the PC or NAS device connected to the network.
Select the server with the cursors, select the desired
music file and press ENTER to start playback.
HOME
Setup
2. Select the item with the cursor buttons of the
remote controller and press ENTER to confirm your
selection.
To return to the previous screen, press RETURN. To
return to the HOME menu, press HOME.
„ Sleep Timer: Select to turn the unit into standby mode
automatically when the specified time elapses.
„ InstaPrevue: Select to preview videos input from the
HDMI input jacks collectively in a single screen. The screen
has a main window (current input video) and sub windows
(other input videos). To switch the current input, select the
desired sub window with the cursor buttons and press
ENTER.
A black sub window is shown for the input with no video
signals.
"InstaPrevue" cannot be selected if the video is being
input from HDMI IN 5 or 6 or there is no signal from the
input currently selected.
Depending on video signals, the picture may not be
properly rendered on the preview thumbnails.
"Network Service" becomes selectable after the network
starts up even if it cannot be selected first. It may take
about a minute to start up.
When "Network Service" is selected for the first time,
the "DISCLAIMER" screen will appear on the TV. Select
"Agree" if you agree the content. If you do not agree the
content, you cannot use the network service.
¼
You cannot use the Network Service function unless the TV is
connected via HDMI since selecting "Agree" in the "DISCLAIMER"
screen is not possible.
Layout of the icons in the "Network Service" top menu
can be changed. Press NET on the remote controller
and press D. Select the source icon with the cursors and
press ENTER, and then select the destination icon and
press ENTER. The positions of the icons are switched
each other.
„ USB: Select "USB" in the TV screen and connect a
USB storage device to the USB port on the front panel. On
the TV screen, select the desired folder or music file with
the cursors of the remote controller and press ENTER to
confirm and start playback.
"USB" becomes selectable after the USB function starts
up even if it cannot be selected first. It may take about a
minute to start up.
13
Step 3: Playing Back
5
Using Quick Setup menu
In the Quick Setup menu, you can set frequently used
functions including input selection and volume adjustment.
1. Press Q SETUP on the remote controller.
The Quick Setup menu is displayed on the connected
TV's screen.
CBL/SAT
Input
BD DVD
Audio
CBL/SAT
Video
STB DVR
Information
GAME
Listening Mode
PC
AUX
2. Select the item with the cursor buttons of the
remote controller and press ENTER to confirm your
selection.
To return to the previous screen, press RETURN.
„ Input: Select the input and check the assignment of input
selector buttons.
„ Audio : You can perform various audio settings including
audio quality and speaker level adjustment.
You cannot select this item when audio is output from the
TV's speakers.
A/V Sync: If the video is behind the audio, you can
delay the audio to offset the gap. Different settings can
be set for each input.
It cannot be set if the input is "NET", "USB" or
"BLUETOOTH".
It cannot be set if the listening mode is Pure Audio
(European, Australian and Asian models) or Direct.
Bass, Treble: Adjust volume of the front speaker.
It cannot be set if the listening mode is Pure Audio
(European, Australian and Asian models) or Direct.
Phase Matching Bass: Suppress phase shift in the
midrange to enhance bass sound. Thus smooth and
powerful bass sound can be obtained.
It cannot be set if the listening mode is Pure Audio
(European, Australian and Asian models) or Direct.
Subwoofer Level, Center Level: Adjust the speaker
level while listening to the sound. The adjustment you
made will be reset to the previous status when you turn
the unit to standby mode.
14
The speakers cannot be adjusted if they have been
set to "No" or "None" in "Setup" - "2. Speaker Setup" "Speaker Configuration".
AccuEQ Room Calibration: Disables the sound field
correction setting set in the automatic speaker setting.
The setting can be separately set to each input.
This setting cannot be selected if the automatic
speaker setting has not been performed.
It cannot be set if headphones are connected or the
listening mode is Pure Audio (European, Australian
and Asian models) or Direct.
Late Night: Make small sounds to be easily heard. It
is useful when you need to reduce the volume while
watching a movie late night. You can enjoy the effect
on Dolby Digital, Dolby Digital Plus and Dolby TrueHD
sources only.
Turning the unit to standby mode will set the setting
to "Off". In case of Dolby TrueHD, the setting will be
set to "Auto".
You cannot use the function during Dolby TrueHD
playback if "Setup" - "3. Audio Adjust" - "Dolby" "Loudness Management" is set to "Off".
Music Optimizer: Improve the quality of the
compressed audio. Playback sound of lossy
compressed files such as MP3 will be improved. The
setting can be separately set to each input.
The setting is effective in the signals of 48 kHz or
less. The setting is not effective in the bitstream
signals.
It cannot be set if the listening mode is Pure Audio
(European, Australian and Asian models) or Direct.
Cinema Filter: Adjust the soundtrack that was
processed to enhance its high pitch range, in order to
make it suitable for home theater.
This function can be used in the following listening
modes: Dolby Atmos, Dolby Digital, Dolby Digital
Plus, Dolby Surround, Dolby TrueHD, Multichannel,
DTS, DTS-ES, DTS Neo:6 Cinema, DTS 96/24, DTS
Neo:6, DTS-HD High Resolution Audio, DTS-HD
Master Audio and DTS Express.
„ Video:
Monitor Out: The video input signals input to the unit
will be converted by the unit when they are output from
the HDMI OUT jack to the TV so that their resolution can
match that of the TV used. Select the HDMI OUT jack to
be used for output.
Wide Mode: You can set the aspect ratio.
Picture Mode: You can adjust the image quality.
"Cinema" will automatically adjust the image to be
suitable to watch movie and "Game" suitable to play
game. In "Standard", the resolution will be changed but
the image quality will not be adjusted. In "Custom", you
can adjust the brightness, contrast, hue and saturation
as desired. If you do not adjust the resolution and image
quality, select "Bypass".
"Wide Mode" and "Picture Mode" can be set only on
the video output from the HDMI OUT MAIN jack.
"Video" cannot be selected if the input is "NET",
"USB" or "BLUETOOTH".
„ Information:
Audio: Displays the audio input source, format, number of
channels, sampling frequency, listening mode, number of
output channels, and other audio information.
Video: Displays the video input source, resolution, signal
format, color tone, 3D information, Aspect, Picture Mode,
output, and other Video information.
Tuner: Displays the band, frequency, preset number, and
other tuner (radio) information.
„ Listening Mode: Select the listening mode from the
categories of "MOVIE/TV", "MUSIC" and "GAME".
It cannot be set when audio is played from the TV's
speakers.
Step 3: Playing Back
6
Using the multi-zone function
Making multi-zone connection
„ Connecting an amplifier or receiver in another room
You can multi-zone connect the unit with an integrated
amplifier and speakers in a separate room and play sound
from an external device connected to the analog audio
input jacks of the unit, sound from the "NET", "USB" or
"BLUETOOTH" source, and the AM/FM broadcasting.
It is possible to perform playback in the main room and a
separate room at the same time, for example by playing
the Blu-ray Disc player in the main room where the unit is
placed while playing Internet radio in a separate room. It is
also possible to perform playback only in a separate room.
As for analog audio input, it is possible to play the
same source or different sources in the main room and
separate room.
As for the "NET", "USB" and "BLUETOOTH", you cannot
select different inputs for the main room and separate
room. For example, if "NET" has been selected in the
main room and then "USB" is selected as playback
source in the separate room, the input in the main room
will change to "USB" accordingly.
When listening to AM/FM broadcasting, you cannot select
different stations for the main room and separate room.
Therefore broadcasting of the same station will be heard
in the both rooms.
You can enjoy 2-channel stereo playback in the other room
during playing 7.2-channel in the main room.
Connect the LINE OUT ZONE2 jacks of the unit and the
line-in jacks of the pre-main amplifier in a separate room
with an analog audio (RCA) cable.
„ Connecting speakers in another room
It is possible to directly connect the speakers in another
room without an amplifier. Connect the speakers in another
room to the SPEAKERS ZONE2 terminals of the unit using
speaker cables. Note that 5.2 ch will be the maximum (¼)
in the main room during Zone 2 playback. Sound cannot
be output from the Surround Back speakers and Height
speakers.
In this case, the Dolby Atmos listening mode cannot be selected.
¼
Connecting with Player
To output audio of the Blu-ray Disc player or such other
player as the source of multi-zone playback, it is necessary
to connect the RCA audio output jacks of the player and the
analog audio input jacks of the unit using the analog audio
cable.
AUDIO
OUT
Zone 2
The volume should be adjusted with the pre-main
amplifier used in the separate room.
Zone 2
Change the setting: After connecting the speakers, press
RCV and then HOME on the remote controller, select
"Setup" - "2. Speaker Setup" - "Speaker Settings" and set
"Powered Zone2" to "Yes".
Adjust the volume on this unit. To adjust the volume,
press ZONE2 on the remote controller and adjust with
VOLS/T. To control on the main unit, press ZONE2 and
within 8 seconds, adjust with the MASTER VOLUME
control. You can mute the sound by pressing MUTING on
the remote controller.
Output to multi-zone is not possible if the connection is
only with HDMI cable or digital cable.
Analog audio output setting may be necessary on the player.
15
Step 3: Playing Back
Performing multi-zone playback
1. Press ZONE2 on the remote controller, point the
remote controller at the unit and press zRECEIVER.
"Z2" lights on the main unit display and the multi-zone
function is enabled. (Zone 2 is now on.)
2. Press ZONE2 on the remote controller again and
press INPUT SELECTOR of the input to be played in
a separate room.
If you turn the unit to standby during multi-zone
playback, the Z2 indicators are dimmed and the
playback mode is switched to playback in a separate
room only. Performing steps 1 and 2 while the unit
is in standby also switches the playback mode to
playback in a separate room only. To play the same
source in the main room and separate room, hold
down ZONE2 for approximately 3 seconds.
To control on the main unit: Press ZONE2 and within
~?{
=
&
=
played in a separate room. To play the same source in the
main room and separate room, press ZONE2 twice.
To turn off the multi-zone function: Press ZONE2 on the
remote controller and press zRECEIVER. Alternatively
press OFF on the main unit.
If Zone 2 is on, power consumption during standby
becomes larger than normal.
If Zone 2 is turned on when the listening mode of the
main room is Pure Audio, it will automatically switch to
Direct. (European, Australian and Asian models)
While Zone 2 is on, the RI linked system function
(interlink between Onkyo components) is disabled.
Pressing INPUT SELECTOR on the remote controller
while you are using the remote controller for Zone 2 will
switch the controlled target to the main room. To control
Zone 2 again, press ZONE2 to enter the Zone control
mode.
16
1
23
4
56
7
8
9
(European, Australian
and Asian models)
M
F
G
H
I
J
K
L
(European, Australian
and Asian models)
N
O
P
Q
R
S
T
Front Panel
1 zON/STANDBY button: Turns the unit on or into
2
3
4
5
6
7
8
9
standby mode.
BLUETOOTH indicator: Flashes while pairing with a
Bluetooth-enabled device is in progress and stays lit
when pairing is completed.
Wi-Fi indicator: Lights when the unit is connected to
the wireless LAN router.
ZONE 2 button: Controls the multi-zone function.
Remote control sensor: Receives signals from the
remote controller.
OFF button: Switches the multi-zone function to off.
Display
LISTENING MODE buttons: Allows you to select the
listening mode.
DIMMER button (North American and Taiwanese
models): Switches the brightness of the display.
RT/PTY/TP button (European, Australian and Asian
models): Can be used when receiving the station
transmitting text information.
F MEMORY button: Registers or deletes a station.
G TUNING MODE button: Switches the tuning mode.
H DISPLAY button: Switches the information on the
N PHONES jack: Stereo headphones with a standard plug
are connected.
O AUX INPUT HDMI/MHL jacks: An HD video camera or
display.
I HOME button: Displays the HOME menu.
J Cursor buttons, lTUNINGj button, dPRESETc
button and ENTER button: Moves the cursor and
confirms the selection. When listening to AM/FM
broadcasting, tune in to the station with lTUNINGj or
select the registered station with dPRESETc.
K RETURN button: Returns the display to the previous
state.
L MASTER VOLUME: Allows you to adjust the volume.
M MUSIC OPTIMIZER button and indicator (North
American and Taiwanese models): Turns on/off the
MUSIC OPTIMIZER function that improves the quality of
the compressed audio.
PURE AUDIO button and indicator (European,
Australian and Asian models): Switches to the Pure
Audio mode.
P
Q
R
S
T
MHL-enabled mobile device is connected. It is possible
to send video and audio of an MHL-enabled mobile
device.
TONE and Tone Level buttons: Adjusts the high tone
and low tone.
Input selector buttons: Switches the input to be
played.
USB port: A USB storage device is connected so that
music files stored in it can be played.
SETUP MIC jack: The supplied speaker setup
microphone is connected.
HYBRID STANDBY indicator: Lights if the unit enters
standby mode when the HDMI Through, network
standby or Wakeup from Bluetooth function is enabled.
17
1
2
3
4
6
5
7
1 23
4
5
9
6
7
8
Display
1 Lights in the following conditions. "Z2": ZONE 2 output is
(Taiwanese models)
8
9
F
G
H I
"USB" and "NET" will flash if the connection is not correct.
¼
2 Lights when headphones are connected.
3 Lights when NET or USB is controlled.
4 Lights according to the type of input digital signals and
Rear Panel
1 RI REMOTE CONTROL jack: An Onkyo product with RI
jack can be connected and synchronized with this unit.
2 : The supplied
3
4
5
6
7
8
9
antennas are connected.
COMPONENT VIDEO IN/OUT jacks: Component video
input/output jacks.
ETHERNET port: Used for LAN connection.
HDMI IN/OUT jacks: Digital video signals and audio
signals are transmitted between the unit and the
connected devices.
SPEAKERS terminals: Speakers are connected. To
use the multi-zone function, connect the speakers in the
separate room to the ZONE2 speaker terminals.
Power cord (North American, European, Australian
and Asian models)
AC INLET (Taiwanese models): The power cord is
connected.
DIGITAL IN COAXIAL/OPTICAL jacks: Digital audio
signals are input.
GND terminal: The ground wire of the turntable is
connected.
18
on. / "HDMI": HDMI signals are input and
HDMI input selector is selected. / "ARC": Audio signals
are input from ARC compatible TV and TV/CD input
selector is selected. / "3D": Input signals are 3D. /
"USB" (¼): "USB" input is selected and USB storage
device is connected. / "NET" (¼): "NET" input is
selected and the unit is connected to the network. /
"DIGITAL": Digital signals are input and the digital input
selector is selected. / Cursor indicators: NET or USB is
controlled.
F COMPOSITE VIDEO/AUDIO IN jacks: Analog video
signals and audio signals are input.
G MONITOR OUT V jack: Video signals are output to the
connected monitor or TV via a composite video cable.
H LINE OUT ZONE 2 jacks: Audio output jacks connected
to the integrated amplifier for multi-zone playback in a
separate room.
I PRE OUT SUBWOOFER jacks: A subwoofer with builtin amplifier is connected.
the listening mode.
5 Lights when Music Optimizer is enabled.
6 Lights in the following conditions. "AUTO": Tuning mode
is auto. / "fTUNEDe": Receiving AM/FM radio. fe
&
<
]&?>[_
STEREO": Receiving FM stereo. / "RDS" (European,
Australian and Asian models): Receiving RDS
broadcasting.
7 "MUTING": Flashes when muting is on.
8 Lights in the following conditions. "SLEEP": Sleep timer
has been set. / "ASb" (Auto Standby): Auto Standby
is on. / "ch": Channel is being set. / "Hz": Crossover
frequencies are being set. / "m/ft": Speaker distances
are being set. / "dB": Speaker volume is being set.
9 Displays various information of the input signals.
Pressing DISPLAY displays the type of input digital
signals and the listening mode.
Troubleshooting
Before starting the procedure
Problems may be solved by simply turning the power
on/off or disconnecting/connecting the power cord,
which is easier than working on the connection,
setting and operating procedure. Try the simple
measures on both the unit and the connected
device. If the problem is that the video or audio is not
output or the HDMI linked operation does not work,
disconnecting/connecting the HDMI cable may solve
it. When reconnecting, be careful not to wind the
HDMI cable since if wound the HDMI cable may not fit
well. After reconnecting, turn off and on the unit and
the connected device.
The AV receiver turns off unexpectedly.
The AV receiver will automatically enter standby mode
when Auto Standby is set and launched.
There’s no sound, or it’s very quiet.
A wrong input selector button has been selected. Select
a correct input for the player. Also check that muting is
not on.
Not all listening modes use all speakers.
There’s no picture.
A wrong input selector button has been selected.
Video is not displayed if the listening mode is Pure Audio.
(European, Australian and Asian models)
To display video from the connected player on the TV
screen while the unit is in standby, you need to enable
HDMI Through function.
When the TV image is blurry or unclear, power cord or
connection cables of the unit may have interfered. In
that case, keep distance between TV antenna cable and
cables of the unit.
If you connect a player supporting HDCP2.2, be sure to
connect it to the HDMI IN3 jack of the unit. At the time,
connect the TV to the HDMI OUT MAIN jack.
HDMI control does not function correctly.
Set the CEC link function of the unit to on. It is also
necessary to make the HDMI linked system setting on
the TV. See the TV's instruction manual for details.
The remote controller does not work.
Be sure to press RCV first before operating the unit with
the remote controller.
There is no sound for multi-zone function.
With multi-zone function, sound is output only when the
signal input source is an external component connected
to the analog audio input jacks of the unit, "NET", "USB",
"BLUETOOTH", "AM" or "FM". Multi-zone playback is
not possible if the player and the unit are connected via
HDMI cable or digital cable. Connect the RCA audio
output jacks of the player and the analog audio input
jacks of the unit with analog audio cable. Also analog
audio output setting may be necessary on the player.
Cannot access to network.
„ Resetting the unit
Resetting the unit to the status at the time of shipment may
solve the problem. If the measures above do not solve the
problem, reset the unit with the following procedure. If you
reset the unit status, your preferences will be reset to the
defaults. Note them down before starting reset.
z How to reset:
1. While holding down CBL/SAT on the main unit (note
that step 2 must be performed with this button
pressed down)
2. Press zON/STANDBY on the main unit ("Clear"
appears on the display and the unit returns to
standby)
Clear
2. Press
zON/
STANDBY.
holding
1. While
down CBL/SAT,
Try plugging/unplugging the unit or the wireless LAN
router or check their power-on status. This will work well
in many cases.
If the desired wireless LAN router is not in the access
point list, it may be set to hide SSID or the ANY
connection may be off. Change the setting and try again.
z How to reset the remote controller:
Cannot connect Bluetooth
2. Within 30 seconds, press RCV again
Try plugging/unplugging the unit and the Bluetoothenabled player. After that, check that the Bluetooth
function is enabled on the Bluetooth-enabled device and
the connection with the unit has been established.
1. While holding down RCV on the remote controller,
press HOME until the remote indicator lights (about
3 seconds)
RCV
Remote
indicator
HOME
19
Specifications
Amplifier Section
Network Section
Rated Output Power
All channels:
95 watts minimum continuous power per channel, 8 ohm loads,
2 channels driven from 20 Hz to 20 kHz, with a maximum total
harmonic distortion of 0.08% (FTC)
115 watts minimum continuous power per channel, 6 ohm loads,
!#$&'*++
distortion of 0.7% (FTC)
(North American)
7 ch × 160 W at 6 ohms, 1 kHz, 1 ch driven of 1% (IEC) (Others)
Maximum Effective Output Power
7 ch × 175 W at 6 ohms, 1 kHz, 1 ch driven (JEITA) (Asian)
Dynamic Power (¼)
¼IEC60268-Short-term maximum output power
ƒ„…!Z{
%
ƒ„…!{
%
ƒ„…!~{
%
THD+N (Total Harmonic Distortion+Noise)
0.08% (20 Hz - 20 kHz, half power)
Damping Factor
„!
{}†{~%
Input Sensitivity and Impedance (Unbalance)
ƒ„„‡>ˆ!‰*Š‹%
ƒ‡>ˆ!Œ}Š__%
Rated RCA Output Level and Impedance
ƒ„„‡>ƒƒ!‰*Š‹‘%
Maximum RCA Output Level and Impedance
ƒ‡>ƒƒ!‰*Š‹‘%
Phono Overload
70 mV (MM 1 kHz 0.5% Direct)
Frequency Response
5 Hz - 100 kHz/+1 dB, –3 dB (Direct mode)
Tone Control Characteristics
±10 dB, 20 Hz (BASS)
±10 dB, 20 kHz (TREBLE)
Signal to Noise Ratio
106 dB (LINE, IHF-A)
80 dB (PHONO MM, IHF-A)
Speaker Impedance
;!Š
”‘%
;!
%
Ethernet LAN
10BASE-T/100BASE-TX
Wireless LAN
IEEE 802.11 b/g/n standard
(Wi-Fi® standard)
2.4 GHz band:
1 - 11 ch (North American)
10 - 11 ch (Spain)
10 - 13 ch (France)
1 - 13 ch (Others)
(Wi-Fi® standard)
Video Section
Input Sensitivity/Output Level and Impedance
‡;>ˆ!
%
„ˆ‡;>ˆ!
ŒB/CB, PR/CR)
‡;>ˆ!
%
Component Video Frequency Response
5 Hz - 100 MHz/+0 dB, –3 dB
Tuner Section
FM Tuning Frequency Range
87.5 MHz - 107.9 MHz (North American and Taiwanese)
87.5 MHz - 108.0 MHz, RDS (Others)
AM Tuning Frequency Range
522/530 kHz - 1611/1710 kHz
Preset Channel
40
20
Bluetooth Section
Communication system
Bluetooth Specification version 2.1 +EDR (Enhanced Data Rate)
Maximum communication range
Line of sight approx. 15 m (¼)
Frequency band
2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible Bluetooth profiles
A2DP 1.2 (Advanced Audio Distribution Profile)
AVRCP 1.3 (Audio Video Remote Control Profile)
Supported Codecs
SBC
Transmission range (A2DP)
20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)
¼The actual range will vary depending on factors such as obstacles between
devices, magnetic fields around a microwave oven, static electricity,
cordless phone, reception sensitivity, antenna’s performance, operating
system, software application, etc.
General
Power Supply
AC 120 V, 60 Hz (North American and Taiwanese)
AC 220 - 240 V, 50/60 Hz (Others)
Power Consumption
6.3 A (North American and Taiwanese)
630 W (Others)
0.1 W (Stand-by, North American and Taiwanese)
0.2 W (Stand-by, Others)
80 W (No-sound)
Dimensions (W × H × D)
435 mm × 173.5 mm × 329 mm
17-1/8" × 6-13/16" × 12-15/16"
Weight
10.0 kg (22.0 lbs.) (North American and Taiwanese)
10.5 kg (23.1 lbs.) (Others)
z HDMI
Input
IN1 (BD/DVD, 4K), IN2 (CBL/SAT, 4K), IN3 (STB/DVR, 4K, HDCP2.2), IN4
(GAME, 4K), IN5 (PC), IN6, AUX INPUT (HDMI/MHL) (front)
Output
OUT MAIN (ARC, HDCP2.2), OUT SUB
Video Resolution
Pass through: 4K 60 Hz (YCbCr 4:2:0)
Upscaling: 4K 30 Hz
Audio Format
DTS-HD Master Audio, DTS-HD High Resolution Audio, Dolby Atmos,
Dolby TrueHD, Dolby Digital Plus, DSD, Multichannel PCM
Supported
3D, Audio Return Channel, DeepColor, x.v.Color, LipSync, CEC (RIHD),
4K (Upscaling and Passthrough)
z Video Inputs
Component
IN (CBL/SAT)
Composite
IN1 (CBL/SAT), IN2 (STB/DVR), IN3 (GAME)
z Video Outputs
Component
OUT
Composite
MONITOR OUT
z Audio Inputs
Digital
OPTICAL (TV/CD)
COAXIAL 1 (BD/DVD), 2 (CBL/SAT)
Analog
BD/DVD, CBL/SAT, STB/DVR, GAME, PC, TV/CD, PHONO
z Audio Outputs
Analog
ZONE2 LINE OUT
2 SUBWOOFER PRE OUT
Speaker Outputs
FRONT L/R, CENTER, SURROUND L/R, BACK or HEIGHT L/R, ZONE2
L/R
Phones
PHONES (Front, ø 6.3)
z Others
Setup Mic
RI
USB
Ethernet
1 (Front)
1
1 (Front)
1
Specifications and features are subject to change without notice.
Others
License and Trademark Information
DISCLAIMER
“MHL, the MHL Logo, and Mobile High-Definition Link are trademarks or
registered trademarks of MHL LLC in the United States and other counties.”
Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos,
Dolby Surround, Surround EX and the double-D symbol are trademarks of
Dolby Laboratories.
InstaPrevue and the InstaPrevue logo are trademarks or registered trademarks
of Silicon Image, Inc. in the United States and other countries.
Apple, iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and
other countries.
Apple TV is a trademark of Apple Inc., registered in the U.S. and other
countries.
For DTS patents, see http://patents.dts.com. Manufactured under license from
DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS-HD Master Audio is a trademark
of DTS, Inc. © DTS, Inc. All Rights Reserved.
SIRIUS, XM and all related marks and logos are trademarks of Sirius XM Radio
Inc. and its subsidiaries. All rights reserved.
DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks, service
marks, or certification marks of the Digital Living Network Alliance.
Qdeo and QuietVideo are trademarks of Marvell or its affiliates.
This product is protected by certain intellectual property rights of Microsoft. Use
or distribution of such technology outside of this product is prohibited without a
license from Microsoft.
Windows and the Windows logo are trademarks of the Microsoft group of
companies.
“CINEMA FILTER” and “CINEMA FILTER (logo)” are trademarks of Onkyo
Corporation.
AccuEQ, Music Optimizer, RIHD and WRAT are trademarks of Onkyo
Corporation.
“RIHD” and “RIHD (logo)” are trademarks of Onkyo Corporation.
®
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
QR Code is a registered trademark of DENSO WAVE INCORPORATED.
Safari is a trademark or registered trademark of Apple Computer, Inc. in the
United States and other countries.
“x.v.Color” is a trademark of Sony Corporation.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and
Thomson.
“All other trademarks are the property of their respective owners.”
Through this device you are able to link to other services or websites which
are not under the control of any company which has designed, manufactured
or distributed/have distributed this device, and its affiliates (collectively,
“Company”). We have no control over the nature, content and availability
of those services. The inclusion of any links does not necessarily imply a
recommendation or endorse the views expressed within them.
All information, content and services available through this device belong to
third parties and are protected by copyright, patent, trademark and/or other
intellectual property laws of applicable countries.
The information, content and services provided through this device are for your
personal, noncommercial use only. Any information, content or services may
not be used in any manner other than previously approved by the appropriate
content owner or service provider.
You may not modify, copy, republish, translate, exploit, create derivative works,
upload, post, transmit, sell or distribute in any manner any information, content
or services available through this device, unless expressly permitted by the
appropriate copyright, patent, trademark and/or other intellectual property
owner, including, without limitation, content owner or service provider.
THE CONTENT AND SERVICES AVAILABLE THROUGH THIS DEVICE ARE
PROVIDED “AS IS”.
COMPANY DOES NOT WARRANT INFORMATION, CONTENT OR
SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY
PURPOSE.
COMPANY EXPRESSLY DISCLAIMS ANY WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF
TITLE, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.
Company makes no representation or warranty of any kind, express or implied,
about the completeness, accuracy, validity, legality, reliability, suitability or
availability with respect to the information, content or services available through
this device. Company shall not be liable, whether in contract or tort, including
negligence and strict liability, for any direct, indirect, special, incidental or
consequential damages or any other damages arising out of, or in connection
with, any information contained in, or as a result of the use of any content or
service by you or any third party, even if Company has been advised of the
possibility of such damages, nor shall Company be liable for any third party
claims against users of this device or any third party.
In no event shall Company be responsible nor liable for, without limiting the
generality of the foregoing, any interruption or suspension of any information,
content or service available through this device. Company is neither responsible
nor liable for customer service related to the information, content and services
available through this device. Any question or request for service relating to
the information, content or services should be made directly to the appropriate
content owners and services providers.
The Wi-Fi CERTIFIED® Logo is a certification mark of the Wi-Fi Alliance.
Wi-Fi certified® logo shows international association certifying interoperability
“Wi-Fi alliance” ensures the product has passed the test for compatibility with
other Wi-Fi certified equipment.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Onkyo is under license.
Other trademarks and trade names are those of their respective owners.
Onkyo does not guarantee Bluetooth compatibility between the AV receiver and
all Bluetooth-enabled devices.
For compatibility between the AV receiver and another device with Bluetooth
technology, consult the device’s documentation and dealer. In some countries,
there may be restrictions on using Bluetooth devices. Check with your local
authorities.
21
Others
Precautions
–
–
For European Models
–
Declaration of Conformity
We declare, under our sole responsibility, that
this product complies with the standards:
– Safety
– Limits and methods of measurement of
radio disturbance characteristics
– Limits for harmonic current emissions
– Limitation of voltage changes, voltage
fluctuations and flicker
– RoHS Directive, 2011/65/EU
– Hereby, Onkyo Corporation, declares that this TX-NR636 is in compliance
with the essential requirements and other relevant provisions of Directive
1999/5/EC.
– µÑÄÕÖÒãÝÉÖÒ2QN\R&RUSRUDWLRQÈÉÎÏÄÔÌÔÄÛÉ7;15ÉÆ
ÕÞÒÖÆÉÖÕÖÆÌÉÕÞÕÕÞÝÉÕÖÆÉÑÌÖÉÌËÌÕÎÆÄÑÌãÌÈÔ×ÇÌÖÉÓÔÌÏÒÊÌÐÌ
ÔÄËÓÒÔÉÈÅÌÑĨÌÔÉÎÖÌÆÄ(&
– ]
–
—{˜‘™;ŠšZ›†œ–
˜]—–—œ
9žŸŸŸ>>‹9
– Undertegnede Onkyo Corporation erklærer herved, at følgende udstyr TXNR636 overholder de væsentlige krav og øvrige relevante krav i direktiv
1999/5/EF.
– Hiermit erklärt Onkyo Corporation, dass sich das Gerät TX-NR636 in
Übereinstimmung mit den grundlegenden Anforderungen und den übrigen
einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
– Käesolevaga kinnitab Onkyo Corporation seadme TX-NR636 vastavust
direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele
teistele asjakohastele sätetele.
– ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Ο ΚΑΤΑΣΚΕΥΑΣΤΗΣ Onkyo Corporation ΔΗΛΩΝΕΙ
ΟΤΙ TX-NR636 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ
ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ
– Por la presente, Onkyo Corporation, declara que este TX-NR636 cumple
con los requisitos esenciales y otras exigencias relevantes de la Directiva
1999/5/EC.
– Par la présente, Onkyo Corporation déclare que l’appareil TX-NR636 est
conforme aux exigences essentielles et aux autres dispositions pertinentes
de la directive 1999/5/CE.
– Con la presente Onkyo Corporation dichiara che questo TX-NR636 è
conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite
dalla direttiva 1999/5/CE.
– ”—]
{‘™;ŠšZ
=
¡
¢ŸŸŸ>>
‹£=¤
¥¢=¥
¢
– Šiuo Onkyo Corporation deklaruoja, kad šis TX-NR636 atitinka esminius
reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
– A Onkyo Corporation ezzennel kijelenti, hogy a TX-NR636 típusú beren†¨
–
†
ª«
¨]
¨œŸŸŸ>>‹£œ]=
<
Ϡ
†¬†¨
– Hierbij verklaart Onkyo Corporation dat het toestel l TX-NR636 in
overeenstemming is met de essentiële eisen en de andere relevante
bepalingen van richtlijn 1999/5/EG.
– Š†]]
­‘™;ŠšZ
†<]
†††]]<]¯°]
Dyrektywy 1999/5/EC.
– Eu, Onkyo Corporation, declaro que o TX-NR636 cumpre os requisitos
essenciais e outras provisões relevantes da Directiva 1999/5/EC.
РΠ
{]
{²²
‘™;ŠšZ
³&
´´µ
Directivei 1999/5/CE.
22
–
–
–
–
]
¶
]{˜‘™;ŠšZ·›†œ¨
˜]—
]–—¨
9ŸŸŸ>>‹9
Onkyo Corporation izjavlja, da je ta TX-NR636 v skladu z bistvenimi
†
<
¸
ŸŸŸ>>‹9
Onkyo Corporation vakuuttaa täten että TX-NR636 tyyppinen laite on
direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin
muiden ehtojen mukainen.
}¹&«]
‘™;ŠšZ&«
väsentliga kraven och andra relevanta stadgar i Direktiv 1999/5/EC.
Hér með lýsir Onkyo Corporation því yfir að varan TX-NR636 er í samræmi
º<«&<º«&<º–
ŸŸŸ>>‹
Onkyo Corporation erklærer herved at denne TX-NR636 er i
overensstemmelse med vesentlige krav og andre relevante bestemmelser i
direktiv 1999/5/EC.
]
{
»‘™;ŠšZ<
osnovnim zahtjevima i ostalim relevantnim odredbama Direktive 1999/5/EC.
(Mainland)
Europe
Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku,
OSAKA 541-0041, JAPAN
http://www.onkyo.com/
The Americas
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
For Dealer, Service, Order and all other Business Inquiries:
Tel: 201-785-2600 Fax: 201-785-2650
http://www.us.onkyo.com/
For Product Support Team Only:
1-800-229-1687
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
Tel: +49-8142-4401-0 Fax: +49-8142-4208-213
http://www.eu.onkyo.com/
1301, 555 Tower, No.555 West NanJing Road, Jing’an District,
Shanghai, China 200041,
Tel: 86-21-52131366 Fax: 86-21-52130396
http://www.cn.onkyo.com/
Meridien House, Ground floor, 69 - 71 Clarendon Road,
Watford, Hertfordshire, WD17 1DS, United Kingdom
Tel: +44 (0)8712-00-19-96 Fax: +44 (0)8712-00-19-95
Asia, Oceania, Middle East, Africa
Please contact an Onkyo distributor referring to Onkyo
SUPPORT site.
http://www.intl.onkyo.com/support/
China
(Hong Kong)
Unit 1033, 10/F, Star House, No 3, Salisbury Road,
Tsim Sha Tsui Kowloon, Hong Kong.
Tel: 852-2429-3118 Fax: 852-2428-9039
http://www.hk.onkyo.com/
The above-mentioned information is subject to change
without prior notice.
Visit the Onkyo web site for the latest update.
D1409-0
SN 29401922
(C) Copyright 2014 Onkyo Corporation Japan. All rights reserved.
* 2 9 4 0 1 9 2 2 *
TX-NR636
AV RECEIVER
Advanced Manual
CONTENTS
AM/FM Radio Receiving Function
Tuning into a Radio Station
Presetting an AM/FM Radio Station
Using RDS (European, Australian and Asian models)
Playing Content from a USB Storage Device
Listening to Internet Radio
About Internet Radio
TuneIn
Pandora®–Getting Started (U.S., Australia and
New Zealand only)
SiriusXM Internet Radio (North American only)
Slacker Personal Radio (North American only)
Registering Other Internet Radios
DLNA Music Streaming
About DLNA
Configuring the Windows Media® Player
DLNA Playback
Controlling Remote Playback from a PC
Music Streaming from a Shared Folder
About Shared Folder
Setting PC
Playing from a Shared Folder
2
2
2
3
4
5
5
5
6
7
8
9
11
11
11
11
12
13
13
13
13
Using Remote Controller for Playing Music Files
About the Remote Controller
Remote Controller Buttons
Icons Displayed during Playback
Using the Listening Modes
Selecting Listening Mode
Contents of Listening Modes
Checking the Input Format
Advanced Settings
How to Set
1.Input/Output Assign
2.Speaker Setup
3.Audio Adjust
4.Source Setup
5.Listening Mode Preset
6.Miscellaneous
7.Hardware Setup
8.Remote Controller Setup
9.Lock Setup
Operating Other Components Using Remote
Controller
Functions of REMOTE MODE Buttons
Programming Remote Control Codes
15
15
15
15
16
16
17
19
20
20
21
24
28
29
32
32
33
39
39
40
40
40
TV operation
Blu-ray Disc player/DVD player/DVD recorder
operation
VCR/PVR operation
Satellite receiver / Cable receiver operation
CD player operation
Cassette tape deck operation
To operate CEC-compatible components
Advanced Speaker Connection
Bi-Amping
Connecting and Operating Onkyo RI Components
About RI Function
RI Connection and Setting
iPod/iPhone Operation
Firmware Update
About Firmware Update
Updating the Firmware via Network
Updating the Firmware via USB
Troubleshooting
Reference Information
42
42
43
43
44
44
44
45
45
46
46
46
47
48
48
48
49
51
57
En
AM/FM Radio Receiving Function
„
Tuning into stations manually
AM/FM Radio Receiving Function
1. Press TUNER on the main unit several times to select
either "AM" or "FM".
Tuning into a Radio Station
2. Press TUNING MODE so that the "AUTO" indicator on
„
Tuning into stations automatically
2. Press D.TUN.
the display goes off.
1. Press TUNER on the main unit several times to select
either "AM" or "FM".
3. Using the number buttons, enter the frequency of the
radio station within 8 seconds.
r To enter 87.5 (FM), for example, press 8, 7, 5, or 8,
7, 5, 0. If you entered a wrong number, press D.TUN
and enter a correct one.
3. Press TUNING to select the desired radio station.
2. Press TUNING MODE so that the "AUTO" indicator on
the display lights.
r The frequency changes by 1 step each time
you press the button. The frequency changes
continuously if the button is held down and stops
when the button is released. Tune by looking at the
display.
Presetting an AM/FM Radio Station
3. Press TUNING to start Auto tuning.
r Searching automatically stops when a station
is found. When tuned into a radio station, the
" TUNED " indicator on the display lights. If FM
stereo broadcasting is tuned, the "FM STEREO"
indicator lights.
r No sound is output while the " TUNED " indicator
is off.
To return the display to "AUTO": Press TUNING MODE
again on the main unit. A station is automatically tuned.
Normally, leave the indicator in "AUTO".
„
Tuning into stations by frequency
It allows you to register up to 40 of your favorite AM/FM
radio stations. Registering radio stations in advance allows
you to tune into your radio station of choice directly.
„
Registering a Station
1. Tune into the AM/FM radio station you want to register.
2. Press MEMORY on the unit so that the preset number
on the display flashes.
It allows you to directly enter the frequency of the radio
station you want to listen to.
1. Press TUNER on the remote controller several times to
When the signal from an FM radio station is weak:
Radio wave may be weak depending on the building
structure and environmental conditions. In that case,
manually tune into the radio station of your choice by
referring to the next section.
2
select either "AM" or "FM".
3. Repeatedly press
PRESET to select a number
between 1 and 40 while the preset number is flashing
(about 8 seconds).
AM/FM Radio Receiving Function
4. Press MEMORY again to register the station.
r When registering, the preset number stops flashing.
r Repeat this procedure for all of your favorite AM/FM
radio stations.
„
Selecting a Preset Radio Station
1. Press CH +/- on the remote controller to select a preset
number.
r Alternatively you can press PRESET on the
main unit. You can also select by directly entering
the preset number with the number buttons on the
remote controller.
Using RDS (European, Australian and Asian
models)
RDS stands for Radio Data System and is a method of
transmitting data in FM radio signals.
r RDS works only in areas where RDS broadcasts are
available.
r In some cases, the text information appeared on the
display is not identical to the content transmitted by
the RDS station. Furthermore, unexpected characters
may be displayed when the unit receives unsupported
characters. However, this is not a malfunction.
r If the signal from an RDS station is weak, the RDS data
may be displayed continuously or not at all.
PS (Program Service): Tuning into a radio station
distributing Program Service information displays the
radio station name. Pressing DISPLAY displays the
frequency for 3 seconds.
„
Deleting a Preset Radio Station
1. Press CH +/- on the remote controller to select the
preset number to delete.
RT (Radio Text): Tuning into a radio station transmitting
Radio Text information displays text on the display of the
unit.
PTY (Program Type): Allows you to search for RDS
stations by program type.
TP (Traffic Program): Allows you to search for radio
stations transmitting traffic information.
„
Displaying Radio Text (RT)
2. Press and hold MEMORY on the main unit and press
TUNING MODE to delete the preset number.
r When deleting, the number on the display goes off.
1. Press RT/PTY/TP on the main unit once.
r The Radio Text (RT) is displayed scrolling across
the display. "No Text Data" is displayed when no text
information is available.
„
Searching by Type (PTY)
1. Press RT/PTY/TP on the main unit twice.
r The current program type appears on the display.
2. Press
PRESET
search for.
to select the type of program to
r The following RDS station types are displayed:
None
News (News reports)
Affairs (Current affairs)
Info (Information)
Sport
Educate (Education)
Drama
Culture
Science (Science and technology)
Varied
Pop M (Pop music)
Rock M (Rock music)
Easy M (Middle of the road music)
Light M (Light classics)
Classics (Serious classics)
Other M (Other music)
Weather
Finance
Children (Children’s programmes)
Social (Social affairs)
Religion
Phone In
Travel
Leisure
Jazz (Jazz music)
Country (Country music)
Nation M (National music)
Oldies (Oldies music)
3
AM/FM Radio Receiving Function / Playing Content from a USB Storage Device
Folk M (Folk music)
Document (Documentary)
3. Press ENTER to search the radio stations of the
selected type.
4. When the desired radio station is found, the station
name on the display flashes. Then, press ENTER again.
r If no stations are found, the message "Not Found" is
displayed.
Playing Content from a USB
Storage Device
z Operation: You can set up by viewing the guidance
displayed on the TV screen. To display the guidance, you
need to make HDMI connection between the unit and
TV. Select the item with the cursor buttons of the remote
controller and press ENTER to confirm your selection. To
return to the previous screen, press RETURN.
„
Listening to Traffic Information (TP)
1. Press RT/PTY/TP on the main unit thrice.
r When the traffic information is transmitted from the
radio station you selected, "[TP]" is displayed. "TP"
only is displayed if no traffic information is available.
2. Press ENTER to search a radio station distributing traffic
information.
3. When such a radio station is found, searching stops and
playing traffic information starts.
r "Not Found" is displayed if no radio station
distributing traffic information is found.
„
Playing Back
1. Press USB on the remote controller to select "USB".
2. Plug your USB storage device with the music files into
the USB port of the unit so that "USB" lights on the
display.
r If the "USB" indicator flashes, check whether the
USB storage device is plugged in properly.
4
r Do not unplug the USB storage device while
"Connecting..." is appeared on the display. This may
cause data corruption or malfunction.
3. Press ENTER.
r The list of folders and music files on the USB storage
device is displayed on the screen, select the folder
with the cursors and press ENTER to confirm your
selection.
4. With the cursors, select the music file to play, and then
press ENTER or to start playback.
Listening to Internet Radio
TuneIn
3. With the cursors, select a radio station or program and
press ENTER to start playing.
Listening to Internet Radio
About Internet Radio
Internet radio, also called net radio, web radio or streaming
radio, is an audio service accessible at the websites of
service providers who distribute music and audio programs
in digital format. There are numerous websites all over the
world, from terrestrial station, special station to personal
website that provide such a service.
The unit comes preset with Internet radio stations (¼)
such as TuneIn for you to enjoy these services, just by
connecting the unit to the Internet.
With more than 70,000 radio stations and 2 million ondemand programs registered, TuneIn is a service where
you can enjoy music, sports and news from all over the
world.
z Operation: You can set up by viewing the guidance
displayed on the TV screen. To display the guidance, you
need to make HDMI connection between the unit and
TV. Select the item with the cursor buttons of the remote
controller and press ENTER to confirm your selection. To
return to the previous screen, press RETURN.
„
Regarding the TuneIn Menu
To display the TuneIn menu, press MENU or ENTER while
playing a radio station. Selecting the corresponding menu
item with the cursors and pressing ENTER allows you to
perform the following operations:
Add to My Presets: Registers radio stations and
programs in your "My Presets" within TuneIn. This allows
you to play registered radio stations and programs with
a simple operation. ("My Presets" is not displayed if it is
empty.)
Remove from My Presets: Deletes a radio station or
program from your "My Presets" within TuneIn.
½ Network services or contents may become unavailable if the service
provider terminates its service.
Report a problem: Reports a problem or interactively
solves a problem related to TuneIn.
View Schedule: Displays the radio station or program
schedule.
Clear recents: Clears all radio stations and programs
from the "Recents" within TuneIn. (This menu is
displayed only when a radio station or program inside
the "Recents" is being played.)
„
Playing Back
1. Press NET on the remote controller to display NET TOP
Add to My Favorites: Registers radio stations and
programs in "My Favorites" of "Network Service".
This allows you to play registered radio stations and
programs with a simple operation.
screen.
r "NET" lights on the display.
r Alternatively you can press HOME and select
"Network Service" in the HOME menu.
2. With the cursors, select "TuneIn", and then press
ENTER to display TuneIn top screen.
5
Listening to Internet Radio
„
Regarding the TuneIn Account
„
Playing Back
„
Create a New Station
Creating an account on the TuneIn website (tunein.com)
and logging in it from the unit allows you to automatically
add radio stations and programs to your "My Presets" on
the unit as you save them on the website .
To display a radio station registered in "My Presets", you
must log into TuneIn from the unit. To log in, select "Login" "I have a TuneIn account" in the "TuneIn" top list on the unit,
and then enter your user name and password.
r If you associate the device on My Page within the TuneIn
website using the registration code obtained by selecting
"Login" - "Login with a registration code" on the unit, you
can log in without entering the user name and password.
1. Press NET on the remote controller to display NET TOP
Enter the name of a track, artist, or genre and Pandora will
create a unique radio station for you based on the musical
qualities of that track, artist, or genre.
screen.
r The "NET" indicator on the display stays lit. To
display the NET TOP screen, you can alternatively
press HOME, select "Network Service" on the
displayed HOME menu, and then press ENTER.
I don’t like this track: Give a track "thumbs-down" and
Pandora will ban that track from the current station.
Why is this track playing?: Discover some of the
musical attributes that Pandora uses to create your
personal radio stations.
2. With the cursors on the remote controller, select
Pandora®–Getting Started (U.S., Australia and
New Zealand only)
Pandora is a free, personalized Internet radio service that
plays the music you know and helps you discover music
you’ll love.
z Operation: You can set up by viewing the guidance
displayed on the TV screen. To display the guidance, you
need to make HDMI connection between the unit and
TV. Select the item with the cursor buttons of the remote
controller and press ENTER to confirm your selection. To
return to the previous screen, press RETURN.
I like this track: Give a track "thumbs-up" and Pandora
will play more music like it.
"Pandora", and then press ENTER.
3. Use / to select "I have a Pandora Account" or "I’m new
to Pandora" and then press ENTER.
If you are new to Pandora select "I’m new to Pandora".
You will see an activation code on your TV screen.
Please write down this code. Go to an Internet
connected computer and point your browser to www.
pandora.com/onkyo. Enter your activation code and then
follow the instructions to create your Pandora account
and your personalized Pandora stations. You can create
your stations by entering your favorite tracks and artists
when prompted. After you have created your account
and stations you can return to your Onkyo receiver and
press ENTER to begin listening to your personalized
Pandora.
If you have an existing Pandora account, you can
add your Pandora account to your Onkyo receiver by
selecting "I have a Pandora Account" and logging in with
your email and password.
r If you want to use multiple user accounts, see "Using
Multiple Accounts". Login can be made from the
"Users" screen.
4. To play a station, use / to select the station from your
station list, and then press ENTER. Playback starts and
the playback screen appears.
I’m tired of this track: If you are tired of a track, you
can put the track to sleep and Pandora will not play it for
one month.
Create station from this artist: Creates a radio station
from this artist.
Create station from this track: Creates a radio station
from this track.
Delete this station: This will permanently delete a
station from your Pandora account. All of your thumbs
feedback will be lost should you choose to re-create the
station with the same track or artist.
Rename this station: Lets you rename the current radio
station.
Bookmark this artist: Pandora will bookmark your
favorite artist for your profile on www.pandora.com.
Bookmark this track: Pandora will bookmark the
current track and allow you to buy them all from Amazon
or iTunes in one step!
Add to My Favorites: Adds a station to My Favorites
list.
PANDORA, the PANDORA logo, and the Pandora trade
dress are trademarks or registered trademarks of Pandora
Media, Inc. Used with permission.
6
Listening to Internet Radio
SiriusXM Internet Radio (North American only)
„
Playing Back
If you want to listen to the service, you must subscribe. To
subscribe go to www.siriusxm.com/internetradio with your
computer. When you subscribe, you will be provided with
a username and password which has to be entered into
the AV receiver. To use SiriusXM Internet Radio, you must
have your AV receiver connected to the Internet. Using the
remote control, follow these steps:
1. Press NET on the remote controller to display NET TOP
z Operation: You can set up by viewing the guidance
displayed on the TV screen. To display the guidance, you
need to make HDMI connection between the unit and
TV. Select the item with the cursor buttons of the remote
controller and press ENTER to confirm your selection. To
return to the previous screen, press RETURN.
screen.
r The "NET" indicator on the display stays lit. To
display the NET TOP screen, you can alternatively
press HOME, select "Network Service" on the
displayed HOME menu, and then press ENTER.
2. With the cursors on the remote controller, select
"SiriusXM Internet Radio", and then press ENTER.
3. Select "Sign In", and then press ENTER. If you have an
existing SIRIUS account, you can sign in by selecting
"Sign In". Enter your user name and password in the
next keyboard screen, or in Web Setup. If you don’t
know your username or password, call Sirius XM at
(888) 539-7474 for assistance.
r If you want to use multiple user accounts, see "Using
Multiple Accounts". Login can be made from the
"Users" screen.
Using the keyboard screen
1 Use / / / and ENTER to enter your user name
and password.
2 Select "OK".
3 Press ENTER. The "Confirm your entries" screen
appears.
4 Press ENTER. "Please wait..." appears and then
"SiriusXM Internet Radio" screen appears which
displays the category available for selection.
4. Use / to select the category and then press ENTER.
The channel list screen for the selected category
appears.
5. Use / to select the desired channel and then press
ENTER.
The playback screen for the selected channel appears
and you can listen to SiriusXM Internet Radio. You can
control the tracks with the buttons on the remote control.
Enabled buttons:
, ,
,
Add to My Favorites: Adds a channel to My Favorites
list.
Add to Presets: Adds the currently playing station to
presets list.
Delete from Presets: Deletes the currently playing
station from presets list.
SiriusXM Internet Radio subscriptions are sold separately
and are governed by the Sirius Terms and Conditions (see
www.sirius.com). Be sure to read this agreement before you
purchase your subscription.
Sirius, XM and all related marks and logos are trademarks
of Sirius XM Radio Inc. and its subsidiaries. All rights
reserved.
7
Listening to Internet Radio
Slacker Personal Radio (North American only)
z Operation: You can set up by viewing the guidance
displayed on the TV screen. To display the guidance, you
need to make HDMI connection between the unit and
TV. Select the item with the cursor buttons of the remote
controller and press ENTER to confirm your selection. To
return to the previous screen, press RETURN.
3. If you do not have an account, create one on the Slacker
4.
5.
6.
7.
8.
„
Playing Back
1. Press NET on the remote controller to display NET TOP
screen.
r The "NET" indicator on the display stays lit. To
display the NET TOP screen, you can alternatively
press HOME, select "Network Service" on the
displayed HOME menu, and then press ENTER.
website (www.slacker.com) with your computer. If you
already have a Slacker account, select "Sign in to your
account" and then press ENTER. The keyboard screen
appears. You can enter information from the remote
control or the keys on the main unit.
If there are no mistakes in the information you have
entered, use / / / to select "OK" then press ENTER.
An account information confirmation screen appears.
If you do not have an account, select "Access without
Sign In" and press ENTER to use a restricted version of
the service. Note that use will be restricted.
r If you want to use multiple user accounts, see "Using
Multiple Accounts". Login can be made from the
"Users" screen.
Use / to select a menu item and then press ENTER.
To sign out, use / to select "Sign out" from this screen
and then press ENTER.
Use / to select a station and then press ENTER or
to start playback from the station. The playback screen
appears.
You can control the tracks with the buttons on the
remote control.
Enabled buttons:
, , ,
Rate Song as Favorite: Stores information to server,
making it more likely that the song will be played again.
Ban Song: Stores information to server, making it less
likely that the song will be played again.
Ban Artist: Stores information to server, making it less
likely that the songs from this artist will be played again.
Mark Favorite: Adds the currently playing station to your
favorites.
Unmark Favorite: Deletes the currently playing station
from your favorites.
Add song to Library: Adds the currently playing track to
your library.
2. With the cursors on the remote controller, select
"Slacker Personal Radio", and then press ENTER.
Delete song from Library: Deletes the currently playing
track from your library.
Add to My Favorites: Adds a station or song to My
Favorites list.
8
Using Multiple Accounts: The AV receiver supports
multiple user accounts, which means you can freely switch
between several logins. After registering user accounts,
login is performed from the "Users" screen.
Press MENU while the Users screen is displayed. "Add
new user", "Remove this user" menu appear. You can either
store a new user account, or delete an existing one.
r Some of the services don’t allow the use of multiple user
accounts.
r You can store up to 10 user accounts.
r To switch between accounts you must first log out from
the current account, and log in again on the "Users"
screen.
Listening to Internet Radio
Registering Other Internet Radios
„
Registering a Station
„
Registering a Station with PC
To listen to other Internet radio program, register the
program in the "My Favorites" list on the NET TOP screen
as described below. The unit supports Internet radio stations
stored in the following formats: PLS (URL ending in .pls),
M3U (URL ending in .m3u) and RSS (URL ending in rss/rdf/
xml).
r You can register up to 40 Internet radio stations.
r Depending on the data type and file format for playback,
you may not be able to play an Internet radio station
even when its format is PLS, M3U or Podcast (RSS).
r Available services may vary depending on your area of
residence.
Before operation: The name and URL of the additional
radio station will be needed for this procedure. Check the
specifications before use.
Before operation: The name and URL of the additional
radio station will be needed for this procedure. Check the
specifications before use.
1. Press NET on the remote controller to display NET TOP
1. Press RCV on the remote controller.
z Operation: You can set up by viewing the guidance
displayed on the TV screen. To display the guidance, you
need to make HDMI connection between the unit and
TV. Select the item with the cursor buttons of the remote
controller and press ENTER to confirm your selection. To
return to the previous screen, press RETURN.
screen.
r "NET" lights on the display.
r Always press RCV first to change the remote
controller to RECEIVER mode (the mode to operate
this unit) since its mode may be changed to operate
another component.
2. With the cursors, select "My Favorites", and then press
ENTER to display the "My Favorites" list screen.
3. With the cursors, select a blank area of "My Favorites"
2. Press HOME to display the HOME menu.
and press MENU to display the menu screen.
4. With the cursors, select "Create new station", and then
press ENTER to display a keyboard screen.
5. Enter the name and URL of the radio station to add.
r Select "Shift" and press ENTER to toggle between
upper and lower case. Select " " or " " and press
ENTER to move the cursor to the selected direction.
Select "Back Space" and press ENTER to remove a
character on the left of the cursor.
3. With the cursors, select "Setup", and then press ENTER.
4. With the cursors, select "7.|Hardware Setup" - "Network"
- "IP Address" to display the IP address.
r Write down the IP address since you will need it later.
5. Open the Internet browser on your PC or smartphone
and enter the IP address of the unit in the URL field.
r If you are using Internet Explorer, you can also enter
the URL by selecting "Open..." on the "File" menu.
r Information of the unit is displayed on the browser.
("WEB Setup")
6. Click "My Favorites" tab, then enter the name and URL
of the Internet radio station.
7. Click "Save" to register the entered Internet radio station
in "My Favorites".
9
Listening to Internet Radio
To rename the registered radio station: When the radio
station is selected from the "My Favorites" list, press MENU
to display the menu screen. Select "Rename this station"
with the cursors and press ENTER to display the keyboard
screen. Rename the station as desired.
r Radio stations can be renamed also from "WEB Setup".
„
Deleting a Registered Radio Station
1. Press NET on the remote controller to display NET TOP
screen.
r "NET" lights on the display.
„
Playing a Registered Radio Station
1. Press NET on the remote controller to display NET TOP
screen.
r "NET" lights on the display.
2. With the cursors, select "My Favorites", and then press
ENTER to display the registered Internet radio stations.
3. With the cursors, select the radio station to delete and
press MENU to display the menu screen.
2. With the cursors, select "My Favorites", and then press
ENTER to display the registered Internet radio stations.
3. With the cursors, select the radio station to delete and
press MENU to display the menu screen.
4. With the cursors, select "Delete from My Favorites", and
then press ENTER. A confirmation screen will appear.
5. With the cursors, select "OK", and then press ENTER to
delete the radio station.
r Select "Back" if you return to the previous screen.
r Radio stations can be deleted also from "WEB
Setup".
10
DLNA Music Streaming
Configuring the Windows Media® Player
DLNA Music Streaming
„
Windows Media® Player 11
1. Turn on your PC and start Windows Media® Player 11.
2. In the "Library" menu, select "Media Sharing" to open a
dialog box.
3. Select the "Share my media" check box, and then click
About DLNA
"OK" to display a list of supported devices.
Digital Living Network Alliance (DLNA) can be referred
to as a technology standard or the industry group to
develop the technology standard to interconnect and use
AV components, computers and other devices in a home
network. This unit allows you to use DLNA to play music
files stored on a computer or a hard disk connected to your
home network (NAS device). Make sure this unit and a
computer or NAS device are connected to the same router.
Internet radio
Router
4. Select this unit, and then click "Allow".
r The corresponding icon is checked.
5. Click "OK" to close the dialog.
„
Windows Media® Player 12
1. Turn on your PC and start Windows Media® Player 12.
2. Click "Turn on media streaming" to display a list of
players in the network.
r If media streaming is already turned on, select "More
streaming options..." in the "Stream" menu to list
players in the network. Proceed to step 4.
3. Click "Turn on media streaming". A list of players in the
network is displayed.
4. Select this unit in "Media streaming options" and check
that it is set to "Allow".
5. Click "OK" to close the dialog.
DLNA Playback
PC
NAS
r To stream a music file, you need a NAS device with
DLNA server functions or a PC where a player (e.g.,
Windows Media® Player 11 or Windows Media® Player
12) with DLNA server functions is installed. To enable
streaming with Windows Media® Player 11 or Windows
Media® Player 12, you must first configure the settings.
„
Playing Back
1. Start the server (Windows Media® Player 11, Windows
Media® Player 12, or NAS device) storing the music files
to play.
2. Press NET on the remote controller to display NET TOP
screen.
r "NET" lights on the display. If the "NET" indicator
flashes, the unit is not properly connected to the
network. When using a wired LAN connection, check
the Ethernet cable connection, and when using a
wireless LAN connection, check whether the "Wi-Fi"
indicator on the left side of the unit stays lit.
z Operation: You can set up by viewing the guidance
displayed on the TV screen. To display the guidance, you
need to make HDMI connection between the unit and
TV. Select the item with the cursor buttons of the remote
controller and press ENTER to confirm your selection. To
return to the previous screen, press RETURN.
3. Select "DLNA" with the cursors and press ENTER.
4. With the cursors, select the target server, and then press
ENTER to display a list of items on the selected server.
r Searching does not work in servers that do not
support search functions.
r The unit cannot access pictures and videos stored
on servers.
r Contents stored on the server may not be displayed
depending on the server sharing settings.
11
DLNA Music Streaming
5. With the cursors, select the music file to play, and then
press ENTER or
to start playback.
r If "No Item" is displayed, check whether the network
is properly connected.
Controlling Remote Playback from a PC
You can use this unit to play music files stored on your PC
by operating the PC inside your home network. The unit
supports remote playback with Windows Media® Player 12.
To use the remote playback function with Windows Media®
Player 12, Windows Media® Player 12 must be configured
in advance.
r Using a DLNA-compatible controller (such as an
Android application), you can select a music file stored
on Windows Media® Player 12 and stream to this unit
by operating the controller. For information on how to
remotely play using the controller, refer to the controller's
instruction manual.
„
Setting PC
1. Turn on your PC and start Windows Media® Player 12.
2. In the "Stream" menu, select "Turn on media streaming"
3.
4.
5.
6.
to open a dialog box.
r If media streaming is already turned on, select "More
streaming options..." in the "Stream" menu to list
players in the network. Proceed to step 4.
Click "Turn on media streaming" to display a list of
players in the network.
Select this unit in "Media streaming options" and check
that it is set to "Allow".
Click "OK" to close the dialog box.
Open the "Stream" menu and check that "Allow remote
control of my Player..." is checked.
12
„
Remote playback
1. Turn on the power of the unit.
2. Turn on your PC and start Windows Media® Player 12.
3. Select the music file to play with Windows Media® Player
12 and right-click.
r To remotely play a music file on another server, open
the target server from "Other Libraries" and select
the music file to play.
4. Select this unit in "Play to" and open the "Play to"
window of Windows Media® Player 12 to start to
playback music file on the unit.
r Operations during remote playback are possible from
the "Play to" window on the PC. The playback screen
is displayed on the TV connected to the HDMI output
of the unit. If your PC is running on Windows® 8, click
"Play to", and then select this unit.
5. Adjust the volume using the volume bar on the "Play to"
window.
r Some times, the volume displayed on the remote
playback window may differ from that appeared on
the display of the unit.
r When the volume is adjusted from the unit, the value
is not reflected in the "Play to" window.
r This unit cannot play music files remotely in the
following conditions.
– It is using a network service.
– It is playing a music file on a USB storage device.
– "Agree" was not selected in the DISCLAIMER
screen that was displayed when the NET input
was selected on the unit for the first time.
Music Streaming from a Shared Folder
Music Streaming from a Shared
Folder
About Shared Folder
A shared folder is configured in a network device such as a
PC or NAS (hard disk connected to your home network) for
access from other users.
You can play music files in a shared folder on your PC or
NAS connected to the same home network as that of the
unit. To play music files in a shared folder, you must first
configure Windows® 8 or Windows® 7, Make sure the unit
and PC or NAS device are connected to the same router.
Setting PC
Playing from a Shared Folder
„
Configuring the Sharing Options
z Operation: You can set up by viewing the guidance
displayed on the TV screen. To display the guidance, you
need to make HDMI connection between the unit and
TV. Select the item with the cursor buttons of the remote
controller and press ENTER to confirm your selection. To
return to the previous screen, press RETURN.
1. Select "Choose Home group and Sharing Options" on
the "Control Panel".
r If the menu is not displayed, check whether "View
by" is set to "Category".
2. Select "Change advanced sharing settings".
3. Check whether the following radio buttons are selected
in "Home or Work":
"Enable network discovery"
"Turn on file and printer sharing"
"Turn on sharing so anyone with network access can
read and write files in the Public folders"
"Turn off password protected sharing"
4. Select "Save Changes" and click "OK" on the dialog box.
„
Creating a Shared Folder
Internet radio
Router
PC
NAS
r The sharing options must be configured and a shared
folder created on the PC in advance.
r For information on how to configure the NAS device
and create a shared folder, refer to the NAS device's
instruction manual.
1.
2.
3.
4.
5.
6.
Select the folder to share and right-click.
Select "Properties".
Select "Advanced Sharing" on the "Sharing" tab.
Select the "Share this folder" check box and click "OK".
Select "Share" for "Network File and Folder Sharing".
Select "Everyone" from the pull-down menu. Click "Add",
and then "Share".
r To set user name and password to a shared folder,
set "Permissions" in "Advanced Sharing" on the
"Sharing" tab.
r Check whether a workgroup is set.
„
Playing Back
1. Press NET on the remote controller to display NET TOP
screen.
r "NET" lights on the display. If the "NET" indicator
flashes, the unit is not properly connected to the
network. When using a wired LAN connection, check
the Ethernet cable connection, and when using a
wireless LAN connection, check whether the "Wi-Fi"
indicator on the left side of the unit is lit.
13
Music Streaming from a Shared Folder
2. With the cursors, select "Home Media", and then press
ENTER.
3. With the cursors, select the target server, and then press
ENTER.
r You can check the server name of your PC from the
PC properties.
4. With the cursors, select the target shared folder, and
then press ENTER.
5. If a username and password is required, enter the
necessary login information.
r The login information is the account information set
at the time of creating the shared folder.
r Once entered, the login information will be
remembered from the next time onward.
6. With the cursors, select the music file to play, and then
press ENTER or
to start playback.
14
Using Remote Controller for Playing Music Files
2. Operate the remote controller by referring to the name
Using Remote Controller for
Playing Music Files
and function of each of the buttons below.
5
1
2
About the Remote Controller
The remote controller of this unit allows you to play music
files stored on USB storage devices, Internet radio, PCs
and NAS devices on your home network, as well as on
Bluetooth-enabled devices. It also allows you to view
information of the music file being played and perform
various other operations.
r Available buttons may vary depending on the service
and device to play.
r Some buttons cannot be used with Bluetooth-enabled
devices. Furthermore, the Bluetooth-enabled devices
must support the AVRCP profile. Some devices may not
be operated, even when they support AVRCP profile.
Remote Controller Buttons
7
3
4
8
9
1 TOP MENU: This button displays the top menu for
each media or server.
2 / , ENTER: These buttons navigate through items
3
4
5
1. Press INPUT SELECTOR (PC, NET, USB or
BLUETOOTH) appropriate for the input source on the
remote controller.
6
6
7
8
9
and activate the selected item.
/ : These buttons cycle through pages.
: This button fast-reverses the current track. This
button is not operable from 10 seconds before the
playback ends.
: This button plays the current track from the
beginning. Pressing this button twice plays the
previous track.
+/-: Moves the cursor on the Internet radio stations
list in "My Favorites".
MENU: This button displays the menu of each
Internet radio service.
RETURN: This button returns to the previous screen.
: This button fast-forwards the current track. This
button is not operable from 10 seconds before the
playback ends.
: This button plays the next track.
F
G
H
I
J
K
H SEARCH: This button toggles between the playback
screen and list screen during playback.
I : This button stops the playback.
J RANDOM: This button performs random playback.
K REPEAT: This button replays the track(or tracks).
Pressing this button repeatedly cycles through the
repeat modes.
L DISPLAY: This button changes the displayed track
information during playback. Pressing this button
when the list screen is displayed toggles the screen
to playback.
r Bluetooth-enabled devices: Usable buttons are
,
,
, ,
,
, and .
Icons Displayed during Playback
Icons are displayed on the display during music file
playback. The meaning of each icon is as follows:
: Folder
: Track
: Play
: Pause
: Fast-forward
: Fast-reverse
: Artist
: Album
: Repeat One Track
: Repeat within a folder
: Repeat
: Shuffle
L
F
G
: This button starts the playback.
: This button pauses the playback.
15
Using the Listening Modes
„
MOVIE/TV button
Using the Listening Modes
Selecting Listening Mode
The listening modes allow you to select the best sound
effect for your input source.
1. Press RCV on the remote controller.
r Always press RCV first to change the remote
controller to RECEIVER mode (the mode to operate
this unit) since its mode may be changed to operate
another component.
2. Press one of the following buttons depending on your
choice from among the four listening modes.
r Pressing a button changes the listening mode to that
chosen. Set the listening mode of your choice by
listening to the actual sound.
For details on the types and difference of listening
modes, see "Contents of Listening Modes".
16
You can select a mode suitable for movies and TV
programs.
r Selectable listening modes:
All Ch Stereo
Direct
Dolby Atmos
Dolby D (Dolby Digital)
Dolby D+ (Dolby Digital Plus)
Dolby Surround
Dolby TrueHD
DSD
DTS
DTS 96/24
DTS Express
DTS-HD HR (DTS-HD High Resolution Audio)
DTS-HD MSTR (DTS-HD Master Audio)
ES Discrete (DTS-ES Discrete)
ES Matrix (DTS-ES Matrix)
Full Mono
Mono
Multichannel
Neo:6
Neo:6 Cinema
T-D (Theater-Dimensional)
TV Logic
„
MUSIC button
You can select a mode suitable for music.
r Selectable listening modes:
All Ch Stereo
Direct
Dolby Atmos
Dolby D (Dolby Digital)
Dolby D+ (Dolby Digital Plus)
Dolby Surround
Dolby TrueHD
DSD
DTS
DTS 96/24
DTS Express
DTS-HD HR (DTS-HD High Resolution Audio)
DTS-HD MSTR (DTS-HD Master Audio)
ES Discrete (DTS-ES Discrete)
ES Matrix (DTS-ES Matrix)
Full Mono
Multichannel
Neo:6
Neo:6 Music
Orchestra
Pure Audio
Stereo
Studio-Mix
Unplugged
„
GAME button
You can select a mode suitable for games.
r Selectable listening modes:
All Ch Stereo
Direct
Dolby Atmos
Dolby D (Dolby Digital)
Dolby D+ (Dolby Digital Plus)
Dolby Surround
Dolby TrueHD
DSD
DTS
DTS 96/24
DTS Express
DTS-HD HR (DTS-HD High Resolution Audio)
DTS-HD MSTR (DTS-HD Master Audio)
ES Discrete (DTS-ES Discrete)
ES Matrix (DTS-ES Matrix)
Full Mono
Neo:6
Game-Action
Game-Rock
Game-RPG
Game-Sports
Multichannel
T-D (Theater-Dimensional)
„
STEREO button
You can select a listening mode for stereo and all channel
stereo sources.
r Selectable listening modes:
All Ch Stereo
Stereo
Using the Listening Modes
„
PURE AUDIO button (on the main unit only)
(European, Australian and Asian models)
The display and analog video circuit is cut off to switch the
unit to Pure Audio mode (European, Australian and Asian
models) and provide purer sound. Selecting this mode
lights the PURE AUDIO indicator on the unit. Pressing the
button again reselects the previous listening mode.
Lists in alphabetic order (A-Z)
„
Dolby D+
„
All Ch Stereo
This mode is for use with Dolby Digital Plus sources.
The audio from the input source is output as-is, without
surround sound processing.
r Input source: 5.1 ch, 7.1 ch
r This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
r When playing back 3.1|ch or 5.1|ch sources from Blu-ray
Discs, Dolby Digital is automatically applied.
Ideal for background music, this mode fills the entire
listening area with stereo sound from the front, surround,
and surround back speakers.
r Input source: MONO, STEREO, 5.1 ch, 7.1 ch
„
Direct
In this mode, audio from the input source is output as-is.
For example, if a 2 ch source from a music CD is input, the
output will be stereo, or if Dolby Digital signal is input, the
sound field will be controlled in accordance with the number
of channels present.
r Input source: MONO, STEREO, 5.1 ch, 7.1 ch
„
Dolby Atmos
r Selecting Pure Audio for listening mode turns off the
display and analog video circuitry, but the video signals
input through HDMI input are output from HDMI output.
Contents of Listening Modes
Selectable listening modes will differ depending on the
number of input source channels and the actual speaker
configuration. Listening modes available when headphones
are connected are: Pure Audio (European, Australian and
Asian models), Mono, Direct, and Stereo.
Introduced first in the cinema, Dolby Atmos brings a
revolutionary sense of dimension and immersion to the
Home Theater experience. Dolby Atmos is an adaptable
and scalable object based format that reproduces
audio as independent sounds (or objects) that can be
accurately positioned and move dynamically throughout
the 3 dimensional listening space during playback. A key
ingredient of Dolby Atmos is the introduction of a height
plane of sound above the listener.
r Surround back speakers or height speakers need to be
installed.
r This listening mode can be selected only if the input
signal is Dolby Atmos.
„
Dolby D
This mode is for use with Dolby Digital sources. The audio
from the input source is output as-is, without surround
sound processing.
r Input source: 5.1 ch
r This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
„
Dolby Surround
Dolby surround is a next generation surround technology
that intelligently up mixes stereo; 5.1 and 7.1 content for
playback through your surround speaker system. Dolby
surround is compatible with traditional speaker layouts,
as well as Dolby Atmos enabled playback systems that
employ in-ceiling speakers or products with Dolby speaker
technology.
r Input source: STEREO, 5.1 ch, 7.1 ch
„
Dolby TrueHD
This mode is for use with Dolby TrueHD sources. The audio
from the input source is output as-is, without surround
sound processing.
r Input source: 7.1 ch
r This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
„
DSD
This mode is for use with DSD sources. The audio from
the input source is output as-is, without surround sound
processing.
r Input source: 5.1 ch
r This unit supports DSD signals input through HDMI IN.
However, depending on the connected player, better
sound is possible when output from the PCM output of
the player. In that case, configure the player for PCM
output.
r This listening mode can be selected only if your Blu-ray
Disc/DVD player's output setting is DSD.
17
Using the Listening Modes
„
DTS
This mode is for use with DTS sources. The audio from
the input source is output as-is, without surround sound
processing.
r Input source: 5.1 ch
r This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
„
DTS 96/24
This mode is for use with DTS 96/24 sources. The audio
from the input source is output as-is, without surround
sound processing. With 96 kHz sampling rate and 24-bit
resolution, it provides superior fidelity.
r Input source: 5.1 ch
r Depending on the settings, this listening mode becomes
DTS.
r This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
„
DTS Express
This mode is for use with DTS Express sources. The audio
from the input source is output as-is, without surround
sound processing.
r Input source: 5.1 ch
r This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
r Input source: 5.1 ch, 7.1 ch
r This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
„
DTS Neo:6
This mode expands any 2 ch source for 5.1 ch multichannel
surround playback. It offers full-bandwidth on all channels,
with great independence between the channels. There are
two variants for this mode: one ideal for movies and another
ideal for music.
– Neo:6 Cinema: Use this mode with any 2 ch movie.
r Input source: STEREO
– Neo:6 Music: Use this mode with any 2 ch music
source.
r Input source: STEREO
– Neo:6: Use this mode to expand any 5.1 ch music
source for 6.1 ch or 7.1 ch playback using Neo:6.
r Input source: 5.1 ch
r Surround back speakers need to be installed.
„
ES Discrete
This mode is for use with DTS-HD High Resolution Audio
sources. The audio from the input source is output as-is,
without surround sound processing.
r Input source: 5.1 ch, 7.1 ch
r This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
This mode is for use with DTS-ES Discrete sources and
enables 6.1 ch or 7.1 ch playback using surround back
channel. Completely discrete seven channels will improve
spatial imaging and enable 360-degree sound localization
producing a sound crossing between the surround
channels.
r Input source: 6.1 ch
r Surround back speakers need to be installed.
r This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
r Use on the DVD with DTS ES logo, particularly on the
software containing DTS-ES Matrix soundtrack.
r Playback becomes DTS if no surround back speaker is
connected.
„
DTS-HD MSTR
„
ES Matrix
This mode is for use with DTS-HD Master Audio sources.
The audio from the input source is output as-is, without
surround sound processing.
This mode is for use with DTS-ES Matrix soundtrack and
enables 6.1 ch or 7.1 ch playback using matrix-encoded
back channel.
„
DTS-HD HR
18
r Input source: 6.1 ch
r Surround back speakers need to be installed.
r This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
r Use on the CD, DVD or LD with DTS ES logo,
particularly on the software containing DTS-ES Matrix
soundtrack.
r Playback becomes DTS if no surround back speaker is
connected.
„
Full Mono
In this mode, all speakers output the same sound in mono,
so the sound you hear is the same regardless of where you
are within the listening room.
r Input source: MONO, STEREO, 5.1 ch, 7.1 ch
„
Game-Action
In this mode, sound localization is distinct with emphasis on
bass.
r Input source: MONO, STEREO, 5.1 ch, 7.1 ch
r Surround speakers need to be installed.
„
Game-Rock
In this mode, sound pressure is emphasized to heighten
live feel.
r Input source: MONO, STEREO, 5.1 ch, 7.1 ch
r Surround speakers need to be installed.
„
Game-RPG
In this mode, the sound has a dramatic feel with a similar
atmosphere to Orchestra mode.
r Input source: MONO, STEREO, 5.1 ch, 7.1 ch
r Surround speakers need to be installed.
„
Game-Sports
Suitable for audio source with much reverberation.
r Input source: MONO, STEREO, 5.1 ch, 7.1 ch
r Surround speakers need to be installed.
Using the Listening Modes
„
Mono
„
Studio-Mix
Checking the Input Format
Use this mode when watching an old movie with a mono
soundtrack, or use it to separately reproduce soundtracks
in two different languages recorded in the left and right
channels of some movies. It is also suitable for DVDs or
other sources containing multiplexed audio.
r Input source: MONO, STEREO, 5.1 ch, 7.1 ch
Suitable for rock or pop music, Listening to music in this
mode creates a lively sound field with a powerful acoustic
image, like being at a club or rock concert.
r Input source: MONO, STEREO, 5.1 ch, 7.1 ch
r Surround speakers need to be installed.
You can check the audio format of the input signals. While
audio from the player is being input, press DISPLAY on the
remote controller several times to switch the information
shown on the main unit display. If "Dolby D 5.1" is displayed
in Signal format, the Dolby Digital 5.1 ch signals are being
input.
r The number of channels is not displayed when the input
signal format is "Dolby Atmos".
„
Multichannel
This mode is for use with PCM multichannel sources.
The audio from the input source is output as-is, without
surround sound processing.
r Input source: 5.1 ch, 7.1 ch
„
Orchestra
Suitable for classical or operatic music, This mode
emphasizes the surround channels in order to widen the
stereo image, and simulates the natural reverberation of a
large hall.
r Input source: MONO, STEREO, 5.1 ch, 7.1 ch
r Surround speakers need to be installed.
„
Pure Audio (European, Australian and Asian
models)
This mode reproduces the original sound accurately. Since
the audio from the input source is output without surround
sound processing and the display and video circuitry are
turned off, possible noise sources are minimized for a
realistic audio reproduction.
r Input source: MONO, STEREO, 5.1 ch, 7.1 ch
r This mode cannot be selected when Zone 2 is
active. Activating Zone 2 when this mode is selected,
automatically switches the listening mode to Direct.
„
T-D
In this mode, you can enjoy a virtual playback of
multichannel surround sound even with only two or three
speakers. This works by controlling how sounds reach the
listener’s left and right ears.
r Input source: MONO, STEREO, 5.1 ch, 7.1 ch
r Good results may not be possible if there is too much
reverb, so we recommend that you use this mode in an
environment with little or no natural reverb.
„
TV Logic
Suitable for TV shows produced in a TV studio, This mode
enhances the surround effects to the entire sound to give
clarity to voices and create a realistic acoustic image.
r Input source: MONO, STEREO, 5.1 ch, 7.1 ch
r Surround speakers need to be installed.
„
Unplugged
Suitable for acoustic instruments, vocals and jazz, This
mode emphasizes the front stereo image, giving the
impression of being right in front of the stage.
r Input source: MONO, STEREO, 5.1 ch, 7.1 ch
r Surround speakers need to be installed.
„
Stereo
In this mode, sound is output from the front left and right
speakers and subwoofer.
r Input source: MONO, STEREO, 5.1 ch, 7.1 ch
19
Advanced Settings
„
Operation
Advanced Settings
4. Press / to select the desired menu, and then press
1. Press RCV on the remote controller.
r Always press RCV first to change the remote
controller to RECEIVER mode (the mode to operate
this unit) since its mode may be changed to operate
another component.
ENTER.
SETUP
1. Input/Output Assign
1. Monitor Out
2. HDMI Input
3. Component Video Input
How to Set
4. Composite Video Input
5. Digital Audio Input
The unit allows you to configure advanced settings, such as
to remap the input and input selector, or configure various
speaker settings in order to provide even better experience.
Make the settings in "Setup" of the HOME menu.
z Operation: You can set up by viewing the guidance
displayed on the TV screen. To display the guidance, you
need to make HDMI connection between the unit and
TV. Select the item with the cursor buttons of the remote
controller and press ENTER to confirm your selection. To
return to the previous screen, press RETURN. To return to
the HOME menu, press HOME.
2. Press HOME to display the HOME menu.
5. With the / / /
cursors, select the desired item to
configure the settings.
r When "ENTER" is displayed on the setting item,
press ENTER.
3. With the /
cursors, select "Setup", and then press
1-1. Monitor Out
ENTER.
Monitor Out
Resolution
HOME
MAIN
Through
Setup
Select which HDMI output you connected to TV. HDCP 2. 2 is available for MAIN output.
To save changes and finish the setting: Press HOME to
exit.
20
Advanced Settings
1.Input/Output Assign
Setting item
Resolution
Monitor Out
The video input signals input to the unit will be converted when they are output from the
HDMI OUT jack to the TV so that their resolution can match that of the TV used.
Setting item
Default Value
Setting Details
Monitor Out
MAIN
Select the HDMI jack to connect the TV.
"MAIN": When connecting the TV to the HDMI
OUT MAIN jack
"SUB": When connecting the TV to the HDMI
OUT SUB jack
r The resolution of the input signal does not
change when output through HDMI OUT
SUB jack.
"MAIN+SUB": When connecting to both the
MAIN and SUB jacks
r Video signals input to the composite video
input jack or the COMPONENT VIDEO input
jacks will be upconverted to HDMI signals
and then output from the HDMI output jack.
r If "MAIN+SUB" is selected
– Only "Through" or "Auto" can be selected
in "Resolution".
– The resolution of the input signal does not
change when output through HDMI OUT
SUB jack.
r The HDMI jack of this unit is compliant with
HDCP2.2 (HDMI OUT MAIN and HDMI IN3
jacks only).
Default Value
Setting Details
Through
Specify the output resolution of the HDMI OUT
jacks. The image resolution of the unit will be
converted so that it can match the resolution
supported by the TV used.
"Through": The output resolution will be the
same as that of the input signals.
"Auto": The resolution will automatically be
converted according to the resolution supported
by the TV.
"480p (480p/576p)", "720p", "1680×720p",
"1080i", "1080p", "2560×1080p": Select the
desired resolution.
"4K": About four times as high resolution
as 1080p (3840×2160 or 4096×2160 pixels
depending on the resolution supported by the
connected TV)
r If "1080p" is selected, 1080p/24 input signals
will be output with an unchanged resolution.
r If the selected resolution is not supported by
the monitor, the video is output in the same
resolution as the input signal.
r If "4K" is selected, video signals may not be
output to some types of TV. For details, see
"Supported Video Resolution of HDMI OUT
MAIN/SUB Jacks" in "Reference Information".
r If "Monitor Out" is set to "SUB", this setting
will be set to "Through".
r You can check the video on the TV while
making this setting. Select the value with the
cursors and press ENTER. Press RETURN
if no video is displayed. (except when "NET",
"USB" or "BLUETOOTH" is selected)
21
Advanced Settings
HDMI Input
Component Video Input
It is possible to change assignment of input selector buttons and the HDMI IN jacks.
CBL/SAT button is assigned to COMPONENT VIDEO IN jack as factory default setting. This
assignment can be changed if necessary. If you do not assign a jack, select "-----".
Setting item
Default Value
Setting Details
BD/DVD
HDMI 1
"HDMI 1" to "HDMI 6": Desired HDMI IN jack
can be assigned to BD/DVD button. If you do not
assign a jack, select "-----". To select an HDMI IN
jack already assigned to another input selector,
change its setting to "-----" first.
Setting item
Default Value
Setting Details
BD/DVD
-----
"COMPONENT": COMPONENT VIDEO IN jack
is assigned to BD/DVD button.
CBL/SAT
COMPONENT
"COMPONENT": COMPONENT VIDEO IN jack
is assigned to CBL/SAT button.
"HDMI 1" to "HDMI 6": Desired HDMI IN jack
can be assigned to CBL/SAT button. If you do
not assign a jack, select "-----". To select an
HDMI IN jack already assigned to another input
selector, change its setting to "-----" first.
STB/DVR
-----
"COMPONENT": COMPONENT VIDEO IN jack
is assigned to STB/DVR button.
GAME
-----
"COMPONENT": COMPONENT VIDEO IN jack
is assigned to GAME button.
"HDMI 1" to "HDMI 6": Desired HDMI IN jack
can be assigned to STB/DVR button. If you do
not assign a jack, select "-----". To select an
HDMI IN jack already assigned to another input
selector, change its setting to "-----" first.
PC
-----
"COMPONENT": COMPONENT VIDEO IN jack
is assigned to PC button.
AUX
-----
The setting cannot be changed.
TV/CD
-----
"COMPONENT": COMPONENT VIDEO IN jack
is assigned to TV/CD button.
PHONO
-----
"COMPONENT": COMPONENT VIDEO IN jack
is assigned to PHONO button.
CBL/SAT
STB/DVR
GAME
HDMI 2
HDMI 3
(HDCP 2.2)
HDMI 4
"HDMI 1" to "HDMI 6": Desired HDMI IN jack
can be assigned to GAME button. If you do not
assign a jack, select "-----". To select an HDMI IN
jack already assigned to another input selector,
change its setting to "-----" first.
PC
HDMI 5
"HDMI 1" to "HDMI 6": Desired HDMI IN jack
can be assigned to PC button. If you do not
assign a jack, select "-----". To select an HDMI IN
jack already assigned to another input selector,
change its setting to "-----" first.
AUX
Front/MHL
The setting cannot be changed.
TV/CD
-----
"HDMI 1" to "HDMI 6": Desired HDMI IN jack
can be assigned to TV/CD button. If you do not
assign a jack, select "-----". To select an HDMI IN
jack already assigned to another input selector,
change its setting to "-----" first.
PHONO
-----
"HDMI 1" to "HDMI 6": Desired HDMI IN jack
can be assigned to PHONO button. If you do not
assign a jack, select "-----". To select an HDMI IN
jack already assigned to another input selector,
change its setting to "-----" first.
22
r When you convert video signals input to the COMPONENT VIDEO IN jacks and output them from
the HDMI OUT jack, set the output resolution of the player to 480i. If the input has 480p or higher
resolution, an error message will appear.
r When "1. Input/Output Assign" - "Monitor Out" is set to "SUB", the 480i/576i component signals only
will be output with an unchanged resolution. Video will not be displayed if the TV does not support the
resolution.
r When "1. Input/Output Assign" - "Monitor Out" is set to "MAIN" or "MAIN+SUB" and "Resolution" is
set to "Through", the 480i/576i component signals will be output with their resolution unchanged. So,
TV sets not supporting these resolutions will not be able to display video.
Advanced Settings
Composite Video Input
Digital Audio Input
It is possible to change assignment of input selector buttons and the COMPOSITE VIDEO
IN V1 to 3 jacks.
It is possible to change assignment of input selector buttons and the DIGITAL IN COAXIAL
1 to 2/OPTICAL jacks.
Setting item
Default Value
Setting Details
Setting item
Default Value
Setting Details
BD/DVD
-----
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE
VIDEO IN V jack can be assigned to BD/DVD
button. If you do not assign a jack, select "-----".
BD/DVD
COAXIAL 1
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to BD/DVD
button. If you do not assign a jack, select "-----".
CBL/SAT
VIDEO 1
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE
VIDEO IN V jack can be assigned to CBL/SAT
button. If you do not assign a jack, select "-----".
CBL/SAT
COAXIAL 2
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to CBL/SAT
button. If you do not assign a jack, select "-----".
STB/DVR
VIDEO 2
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE
VIDEO IN V jack can be assigned to STB/DVR
button. If you do not assign a jack, select "-----".
STB/DVR
-----
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to STB/DVR
button. If you do not assign a jack, select "-----".
GAME
VIDEO 3
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE
VIDEO IN V jack can be assigned to GAME
button. If you do not assign a jack, select "-----".
GAME
-----
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to GAME button.
If you do not assign a jack, select "-----".
PC
-----
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE
VIDEO IN V jack can be assigned to PC button.
If you do not assign a jack, select "-----".
PC
-----
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to PC button. If
you do not assign a jack, select "-----".
AUX
-----
The setting cannot be changed.
AUX
-----
The setting cannot be changed.
TV/CD
-----
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE
VIDEO IN V jack can be assigned to TV/CD
button. If you do not assign a jack, select "-----".
TV/CD
OPTICAL
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to TV/CD button.
If you do not assign a jack, select "-----".
PHONO
-----
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE
VIDEO IN V jack can be assigned to PHONO
button. If you do not assign a jack, select "-----".
PHONO
-----
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to PHONO
button. If you do not assign a jack, select "-----".
r When "1. Input/Output Assign" - "Monitor Out" is set to "SUB", the 480i/576i composite signals only
will be output with an unchanged resolution. Video will not be displayed if the TV does not support the
resolution.
r When "1. Input/Output Assign" - "Monitor Out" is set to "MAIN" or "MAIN+SUB" and "Resolution" is
set to "Through", the 480i/576i composite signals will be output with their resolution unchanged. So,
TV sets not supporting these resolutions will not be able to display video.
r Supported sampling rates for PCM signals (stereo, mono) from a digital input are 32|kHz/44.1|kHz/
48|kHz/88.2|kHz/96|kHz/16|bit, 20|bit, 24|bit.
23
Advanced Settings
2.Speaker Setup
Setting item
Default Value
Setting Details
Allows you to change the speaker configuration such as existence of subwoofer, crossover
frequency, and so on. Settings are automatically configured if you use the Automatic
Speaker Setup.
Furthermore, you will not be able to select this setting if you have a pair of headphones
connected or you are listening through your TV speakers.
Powered Zone 2
No
Set presence of speaker terminal connection of
Zone 2
"Yes": When speakers are connected to ZONE2
speaker terminals
"No": When speakers are not connected to ZONE2
speaker terminals
r If "Front Speakers Type" is set to "Bi-Amp", this
setting will be set to "No".
Speaker Settings
Change the impedance of the connected speakers, the type of front speaker connection
and height speaker type.
r For impedance, check the indications on the back of the speakers or their instruction manual.
Setting item
Default Value
Setting Details
Speaker Configuration
Speaker
Impedance
(European,
Australian and
Asian models)
6ohms
Set the impedance of the connected speakers.
"4ohms": When any of the connected speakers
have 4|ŝ or more to less than 6|ŝ impedance
"6ohms": When the connected speakers all have
6|ŝ or more impedance
Allows you to change the speaker configuration such as presence or not of each speaker,
crossover frequency, and so on. Settings are automatically configured if you use the
Automatic Speaker Setup. Audio will not be output while you are making this setting.
Front Speakers
Type
Height Speakers
Type
24
Normal
Not Use
Select the type of front speaker connection.
"Normal": When front speakers are connected in a
normal manner
"Bi-Amp": When front speakers are bi-amp
connected
Set the speaker type if height speakers are
connected to the SPEAKERS BACK or HEIGHT
terminals. Select from the following options
according to the type and layout of the connected
speakers: "Not Use", "Front High", "Top Front",
"Top Middle", "Dolby Enabled Speaker (Front)", or
"Dolby Enabled Speaker (Surround)".
r If "Front Speakers Type" is set to "Bi-Amp", this
setting will be set to "Not Use".
r "Dolby Enabled Speaker (Surround)" cannot be
selected if "Speaker Configuration" - "Surround"
is set to "None".
Setting item
Default Value
Setting Details
Subwoofer
Yes
Set whether a subwoofer is connected or not.
"Yes": When subwoofer is connected
"No": When subwoofer is not connected
Front
100Hz
Select the frequency to start outputting
frequencies (crossover frequency) for each
channel from "40Hz" to "200Hz".
"Full Band": Full band will be output.
r "Front" will be fixed to "Full Band" if "Subwoofer"
is set to "No", and the bass frequencies of the
other channels will be output from the front
speakers. To make the settings, refer to the
instruction manual of the speakers used.
Center
100Hz
Select the frequency to start outputting
frequencies (crossover frequency) for each
channel from "40Hz" to "200Hz".
"Full Band": Full band will be output.
"None": When no compatible speaker is connected
r "Full Band" can only be set if "Front" is set to
"Full Band".
Advanced Settings
Setting item
Default Value
Setting Details
Setting item
Default Value
Setting Details
Surround
100Hz
Select the frequency to start outputting
frequencies (crossover frequency) for each
channel from "40Hz" to "200Hz".
"Full Band": Full band will be output.
"None": When no compatible speaker is connected
r "Full Band" can only be set if "Front" is set to
"Full Band".
Height
None
Back
100Hz
Select the frequency to start outputting
frequencies (crossover frequency) for each
channel from "40Hz" to "200Hz".
"Full Band": Full band will be output.
"None": When no compatible speaker is connected
r In any of the following cases, this setting will be
set to "None".
– "Surround" is set to "None".
– "Speaker Settings" - "Front Speakers Type"
is set to "Bi-Amp".
– "Speaker Settings" - "Height Speakers Type"
is set to other than "Not Use".
– "Speaker Settings" - "Powered Zone 2" is set
to "Yes" and also Zone2 is set to on.
r "Full Band" can only be set if "Surround" is set
to "Full Band".
Select the frequency to start outputting
frequencies (crossover frequency) for each
channel from "40Hz" to "200Hz".
"Full Band": Full band will be output.
r In any of the following cases, this setting will be
set to "None".
– "Speaker Settings" - "Height Speakers Type"
is set to "Not Use".
– "Speaker Settings" - "Front Speakers Type"
is set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 2" is set
to "Yes" and also Zone2 is set to on.
r If any type is selected in "Speaker Settings" "Height Speakers Type", this setting will be set
to "100Hz" as default value. In this case, this
setting cannot be set to "None".
r "Full Band" can only be set if "Front" is set to
"Full Band".
LPF of LFE
120Hz
Set the low-pass filter for LFE (low-frequency
effect) signals in order to pass lower frequency
signals than the set value and thus cancel
unwanted noises. The low-pass filter will be
effective only on sources with LFE channel.
Set a frequency from "80Hz" to "120Hz".
"Off": Do not use this function
Double Bass
-----
Boost bass output by feeding bass sounds from
the front left and right, and center speakers to the
subwoofer.
"On": Bass output will be boosted.
"Off": Bass output will not be boosted.
r The setting will not automatically be configured
even if you performed the automatic speaker
setup.
r If "Subwoofer" is set to "No" or if "Front" is set to
other than "Full Band", the setting will be fixed
to "-----".
Back ch
2ch
Select the number of channels of the connected
surround back speaker.
"1ch": When one speaker is connected (Connect to
the BACK or HEIGHT L terminal)
"2ch": When two speakers are connected
r The setting cannot be changed if "Back" is set
to "None".
25
Advanced Settings
Speaker Distance
Setting item
Default Value
Setting Details
Set the distance from each speaker to the listening position. Settings are automatically
configured if you use the automatic speaker setup.
Back
7.0ft/2.10m
Specify the distance between each speaker and
the listening position.
r The setting is displayed if "Speaker
Configuration" - "Back" is set to other than
"None" and also "Back ch" is set to "1ch".
r This setting cannot be changed when
"Speaker Settings" - "Powered Zone 2" is set
to "Yes" and Zone 2 is turned on.
Surround Left
7.0ft/2.10m
Specify the distance between each speaker and
the listening position.
Setting item
Default Value
Setting Details
Unit
feet/meters
Specify the unit of distance for configuring
settings.
"feet": When setting in feet (0.1ft to 30.0ft, in
increments of 0.1ft)
"meters": When setting in meters (0.03m to
9.00m, in increments of 0.03m)
Front Left
12.0ft/3.60m
Specify the distance between each speaker and
the listening position.
Subwoofer
12.0ft/3.60m
Specify the distance between each speaker and
the listening position.
Center
12.0ft/3.60m
Specify the distance between each speaker and
the listening position.
Height Left
9.0ft/2.70m
Front Right
12.0ft/3.60m
Specify the distance between each speaker and
the listening position.
Surround Right
7.0ft/2.10m
Specify the distance between each speaker and
the listening position.
Back Right
7.0ft/2.10m
Specify the distance between each speaker and
the listening position.
r The setting is not displayed if "Speaker
Configuration" - "Back" is set to other than
"None" and also "Back ch" is set to "1ch".
r This setting cannot be changed in any of the
following cases.
– "Speaker Settings" - "Front Speakers
Type" is set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 2" is
set to "Yes" and also Zone2 is set to on.
Specify the distance between each speaker and
the listening position.
r This setting cannot be changed in any of the
following cases.
– "Speaker Settings" - "Height Speakers
Type" is set to "Not Use".
– "Speaker Settings" - "Powered Zone 2" is
set to "Yes" and also Zone2 is set to on.
Height Right
9.0ft/2.70m
Specify the distance between each speaker and
the listening position.
r This setting cannot be changed in any of the
following cases.
– "Speaker Settings" - "Height Speakers
Type" is set to "Not Use".
– "Speaker Settings" - "Powered Zone 2" is
set to "Yes" and also Zone2 is set to on.
Back Left
26
7.0ft/2.10m
Specify the distance between each speaker and
the listening position.
r The setting is not displayed if "Speaker
Configuration" - "Back" is set to other than
"None" and also "Back ch" is set to "1ch".
r This setting cannot be changed in any of the
following cases.
– "Speaker Settings" - "Front Speakers
Type" is set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 2" is
set to "Yes" and also Zone2 is set to on.
r When the speaker is set to "No" or "None" in "Speaker Configuration", the settings for "Speaker
Distance" cannot be changed:
r Default values vary depending on the regions.
Advanced Settings
Level Calibration
Setting item
Default Value
Setting Details
Adjust the level of each speaker with the built-in test tone. Settings are automatically
configured if you use the Automatic Speaker Setup.
Back
0 dB
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
r The setting is displayed if "Speaker
Configuration" - "Back" is set to other than
"None" and also "Back ch" is set to "1ch".
r This setting cannot be changed when
"Speaker Settings" - "Powered Zone 2" is set
to "Yes" and Zone 2 is turned on.
Setting item
Default Value
Setting Details
Front Left
0 dB
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
Center
0 dB
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
Surround Left
0 dB
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
Subwoofer
0 dB
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
Select a value between "-15 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
Height Left
0 dB
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
r This setting cannot be changed in any of the
following cases.
– "Speaker Settings" - "Height Speakers
Type" is set to "Not Use".
– "Speaker Settings" - "Powered Zone 2" is
set to "Yes" and also Zone2 is set to on.
Height Right
0 dB
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
r This setting cannot be changed in any of the
following cases.
– "Speaker Settings" - "Height Speakers
Type" is set to "Not Use".
– "Speaker Settings" - "Powered Zone 2" is
set to "Yes" and also Zone2 is set to on.
Front Right
Surround Right
Back Right
Back Left
0 dB
0 dB
0 dB
0 dB
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
r The setting is not displayed if "Speaker
Configuration" - "Back" is set to other than
"None" and also "Back ch" is set to "1ch".
r This setting cannot be changed in any of the
following cases.
– "Speaker Settings" - "Front Speakers
Type" is set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 2" is
set to "Yes" and also Zone2 is set to on.
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
r The setting is not displayed if "Speaker
Configuration" - "Back" is set to other than
"None" and also "Back ch" is set to "1ch".
r This setting cannot be changed in any of the
following cases.
– "Speaker Settings" - "Front Speakers
Type" is set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 2" is
set to "Yes" and also Zone2 is set to on.
r In the following cases, the settings for "Level Calibration" cannot be changed:
– The speaker is set to "No" or "None" in "Speaker Configuration".
– Mute (MUTING) is set.
27
Advanced Settings
3.Audio Adjust
DTS
Configure various settings related to sound, such as settings for listening to multiplex audio
or multilingual TV broadcasts and sound field settings for listening modes.
Make the settings for DTS Neo:6 Music listening mode.
Multiplex/Mono
Setting item
Default Value
Setting Details
Multiplex
Input Channel
Main
Set the audio channel or language to be output
when playing multiplex audio or multilingual TV
broadcasts etc.
"Main": Main channel only
"Sub": Sub channel only
"Main/Sub": Main and sub channels will be
output at the same time.
r If multiplex audio is being played, "1+1" will
be displayed when DISPLAY is pressed.
Mono
Input Channel
Left+Right
Set the input channel to use for playing any 2
ch digital source such as Dolby Digital, or 2-ch
analog/PCM source in the Mono listening mode.
"Left": Left channel only
"Right": Right channel only
"Left+Right": Left and right channels
Default Value
Setting Details
Neo:6 Music
Center Image
2
Adjust the width of the sound field of the front
channel when playing in the DTS Neo:6 Music
listening mode.
"0" to "5": Selecting a smaller value brings the
sound field of the front channel to the center
while selecting a larger value spreads the sound
field of the front channel to left and right.
Theater-Dimensional
Make the settings for Theater-Dimensional mode.
Setting item
Default Value
Setting Details
Listening Angle
Wide
Set the angle of the front left and right speakers
relative to the listening position when playing in
the Theater-Dimensional listening mode.
"Narrow": Less than 30°
"Wide": Greater than 30°
r Values recommended for "Listening Angle" are: 20° when "Narrow" is selected and 40° when "Wide"
is selected.
Dolby
Make the settings for Dolby listening mode.
Setting item
Default Value
Setting Details
Loudness
Management
On
Enable the Late Night function that allows
you to enjoy surround sound of Dolby TrueHD
playback even in low volume.
"On": Use this function
"Off": Do not use this function
Center Spread
Off
Adjust the width of the front sound field created
during Dolby Surround listening mode playback.
"On": The sound field is spread to left and right.
"Off": The sound field is centralized.
r The setting will be fixed to "Off" if "Speaker
Configuration" - "Center" is set to "None".
28
Setting item
Advanced Settings
4.Source Setup
Name Edit
Adjust the volume level difference among the multiple devices connected to this unit,
rename an input selector, or adjust the image quality. The setting can be separately set to
each input selector button. When you select a desired input to check the video or audio,
start playback of the connected device.
Set an easy name to each input. The set name will be shown on the main unit display.
AccuEQ Room Calibration
Setting item
Default Value
Setting Details
AccuEQ Room
Calibration
Off
Enable/disable the sound field set in automatic
speaker setup
"On": Enable this function
"Off": Disable this function
r In the following cases, the setting cannot be
changed:
– Automatic speaker setup is not performed.
– Headphones are connected.
Setting item
Default Value
Setting Details
IntelliVolume
0 dB
Adjust the volume level difference between the
devices connected to the unit. Select a value
between "-12 dB" to "+12 dB". Set a negative
value if the volume of the target device is larger
than the others and a positive value if smaller.
r This function is not effective in Zone 2.
IntelliVolume
Setting item
Default Value
Setting Details
Name
Input name
1. Select a character or symbol with the
cursors and press ENTER.
Repeat it to input 10 or less characters.
"Shift": Switches between upper and
lower cases. (Pressing +10 on the remote
controller also toggles between upper and
lower cases.)
" " " ": Moves the cursor to the arrow
direction.
"Back Space": Removes a character on the
left of the cursor.
"Space": Puts a space.
r Pressing CLR on the remote controller
will remove all the input characters.
2. After inputting, select "OK" with the cursors
and press ENTER.
The input name will be saved.
r To name a preset radio station, press TUNER on the remote controller, select AM/FM and select the
preset number.
r It cannot be set if the input is "NET", "USB" or "BLUETOOTH".
29
Advanced Settings
Picture Adjust
Setting item
Default Value
Setting Details
Adjust the image quality. (Possible only when the video player is connected to the HDMI
OUT MAIN jack) If you adjust it by checking the video, press ENTER. Press RETURN to
return the screen to the previous status.
Picture Mode
Custom
An appropriate image quality setting for cinema
or game will be selected. You can also adjust
each item to obtain your favorite image quality.
"Custom": The items from "Game Mode" to
"Color Temperature" below can be adjusted as
desired.
"Cinema": When the video source is cinema
"Game": When the video source is game
"Standard": The resolution will be changed but
the image quality will not be adjusted.
"Bypass": Both the resolution and image quality
will not be adjusted.
r If you select "Bypass", the on-screen display
function will be disabled.
Game Mode
Off
Change to the setting suitable for game. Also
correct the delay of video signals of the game
console if any.
"On": Use this function
"Off": Do not use this function
r If you select "On", the delay will be corrected
but the image quality will be lower.
r The setting will be fixed to "Off" if "1.|Input/
Output Assign" - "Monitor Out" - " Resolution"
is set to "4K".
Film Mode
Auto
Change to the setting suitable for film.
"Auto": Image processing suitable for film will be
executed.
"Video": "Film Mode" will not be applied and the
input signals will be processed as video source.
Edge
Enhancement
Off
Adjust the sharpness of the outline of image.
Select from "Off", "Low", "Mid" (Middle), and
"High".
r The setting will be fixed to "Off" if "Game
Mode" is set to "On".
r When the horizontal resolution of the output
video is 2,000 TV lines or more, this setting is
set to "Off".
Noise Reduction
Off
Reduces the noise of the screen. Select from
"Off", "Low", "Mid" (Middle), and "High".
r The setting will be fixed to "Off" if "Game
Mode" is set to "On".
Setting item
Default Value
Setting Details
Wide Mode
Auto
Set the aspect ratio.
"Auto": The aspect ratio will automatically be set
according to the input signals and the monitor
output setting.
"4:3":
"Full":
"Zoom":
"Wide Zoom":
r When a 3D or 4K video source is input, this
setting is set to "Full". Furthermore, for some
resolutions, this setting may be disabled and
set to "Full".
30
Advanced Settings
Default Value
Setting Details
Audio Selector
Brightness
0
Adjust brightness of the screen. Select a value
between "-50" to "+50".
Make the audio input setting. The setting can be separately set to each input selector
button. Select the input selector to configure.
Contrast
0
Adjust contrast of the screen. Select a value
between "-50" to "+50".
Setting item
Hue
0
Correct hue of the screen. Select a value
between "-50" to "+50".
Saturation
0
Adjust saturation of the screen. Select a value
between "-50" to "+50".
Color
Temperature
Normal
Set color temperature of the screen. Select from
"Warm", "Normal" and "Cool".
Setting item
Default Value
Setting Details
Audio Selector
–
Allows you to select prior input source.
"ARC": When giving priority to input signal from
ARC compatible TV.
r The setting can be selected only when
"HDMI" - "Audio Return Channel" is set to
"Auto" and also the "TV/CD" input is selected.
"HDMI": When giving priority to input signal from
HDMI jacks
r The setting can be selected only when the
input is assigned to the HDMI IN jack in the
"HDMI Input" setting.
"COAXIAL" (Coaxial input): When giving priority
to input signal from DIGITAL IN COAXIAL jacks.
r The setting can be selected only when the
input is assigned to the COAXIAL jack in the
"Digital Audio Input" setting.
"OPTICAL" (Optical input): When giving priority
to input signal from DIGITAL IN OPTICAL jacks.
r The setting can be selected only when the
input is assigned to the OPTICAL jack in the
"Digital Audio Input" setting.
"Analog": To always output analog audio
independently of the input signal
Off
Specify an input signal when "HDMI", "COAXIAL
(Coaxial input)", or "OPTICAL (Optical input)"
is selected for "Audio Selector". Set this item if
noise is produced, or truncation occurs at the
beginning of a track that follows a gap when
playing PCM or DTS sources.
"Off": To play an analog signal when there is no
digital signal.
"PCM": To fix the input source to PCM (except
for Multichannel PCM).
"DTS": To fix the input source to DTS (except for
DTS-HD)
r Changing "Audio Selector" changes the
setting to "Off".
r In the following cases, the settings for "Picture Adjust" cannot be changed:
– "NET", "USB" or "BLUETOOTH" is selected.
– "1. Input/Output Assign" - "Monitor Out" is set to "SUB".
r Press CLR on the remote controller if you return all the settings from "Game Mode" through "Color
Temperature" to their default value.
Fixed Mode
r The setting cannot be changed when "PHONO", "TUNER", "NET", "USB" or "BLUETOOTH" is
selected.
31
Advanced Settings
5.Listening Mode Preset
6.Miscellaneous
You can preset your favorite listening mode to each input. (For example, you can always
apply straight decode to the Dolby TrueHD source of Blu-ray Disc to play it in unchanged
sound field.) Select the input, signal type and listening mode.
Although it is possible to select the listening mode during playback, the selected mode will
be reset when the unit enters standby mode.
Volume Setup
Setting item
Default Value
Setting Details
Analog/PCM
Last Valid
Set the listening mode for playing PCM signals
of CD and analog signals of record and cassette
tape.
Mono/Multiplex
Source
Last Valid
Set the listening mode for playing Dolby Digital
and other digital signals recorded in monaural or
multiplex audio.
2ch Source
Last Valid
Set the listening mode for playing Dolby Digital
and other digital signals recorded in 2 channels.
Dolby D/Dolby D
Plus/TrueHD
Last Valid
Set the listening mode for playing Dolby Digital,
Dolby Digital Plus and Dolby TrueHD signals.
DTS/DTS-ES/DTSHD
Last Valid
Set the listening mode for playing digital audio
signals in DTS and DTS-HD High Resolution
formats. Select the listening mode specified for
Blu-ray or such other DTS-HD Master Audio
source.
Other Multich Source Last Valid
r
r
r
r
r
Set the listening mode for playing DSD signals
of DVD-Audio and Super Audio CD that are
input from HDMI IN jack.
Make the detailed volume setting of the unit.
Setting item
Default Value
Setting Details
Maximum Volume
Off
Set the maximum value to avoid too high volume.
Select a value from "Off", "30" to "79".
Power On Volume
Last
Set the volume level of when the power is turned
on. Select a value from "Last" (Volume level
before entering standby mode), "Min", "1" to "79"
and "Max".
r You cannot set a higher value than that of
"Maximum Volume".
Headphone Level
0 dB
Adjust the volume level difference between
speakers and headphones. Select a value
between "-12 dB" to "+12 dB".
OSD Setup
Make the setting of on-screen display function that can display the setting menu screen,
volume operation screen and the like on the TV.
Setting item
Default Value
Setting Details
On Screen Display
On
Set whether or not to display the operation
screen on the TV.
"On": The operation screen will be displayed on
the TV.
"Off": The operation screen will not be displayed
on the TV.
r The operation screen may not be displayed
depending on the input signal even if "On"
is selected. If the operation screen is not
displayed, change the resolution of the
connected device.
Language
English
Select the on-screen display language.
Screen Saver
3min
Set the time to start the screen saver. Select a
value from "3min", "5min", "10min" and "Off".
Available listening modes vary depending on the input signal.
Setting "Last Valid" will always select the last selected mode.
Only "Analog" can be set to the "TUNER" input.
"Digital" and "TrueHD" can be set to the "NET" and "USB" inputs.
Only "Digital" can be set to the "BLUETOOTH" input.
32
Advanced Settings
7.Hardware Setup
HDMI
Tuner
Setting item
Default Value
Setting Details
AM/FM Frequency
Step (North
American and
Taiwanese models)
10kHz/200kHz
Select a frequency step depending on your
area of residence.
Select "10kHz/200kHz" or "9kHz/50kHz".
r When this setting is changed, all radio
presets are deleted.
r Default values vary depending on the
regions.
AM Frequency
Step (European,
Australian and Asian
models)
9kHz
Select a frequency step depending on your
area of residence.
Select "10kHz" or "9kHz".
r When this setting is changed, all radio
presets are deleted.
r Default values vary depending on the
regions.
Setting item
Default Value
Setting Details
HDMI CEC (RIHD)
Off
Setting to "On" enables the input selection link
and other link functions with HDMI connected
CEC compliant device.
"On": Use this function
"Off": Do not use this function
r Depending on the TV set, a link may need to
be configured on the TV.
r This function is effective only when the
device is connected to the HDMI OUT MAIN
terminal.
r Setting to "On" and closing the on-screen
menu displays the name of the CECcompatible components and "RIHD On" on
the display.
r Power consumption in standby mode may
increase if "On" is set. (Depending on the TV
status, the unit will enter the normal standby
mode.)
r If you operate the MASTER VOLUME control
of the unit when this setting is set to "On"
and you are listening to the audio through the
speakers of your TV, audio will be output also
from the speakers connected to the unit. If
you want to output from only either of them,
change the unit or TV settings, or reduce the
volume of the unit.
r If abnormal operation occurs when you set
the setting to "On", set it to "Off".
r When connecting a non-CEC compatible
component, or when you are not sure
whether it is compatible, set the setting to
"Off".
r When changing this setting, turn off and
then on again the power of all connected
components.
33
Advanced Settings
Setting item
Default Value
Setting Details
Setting item
HDMI Through
Off
You can display the video of an HDMI connected
player on the TV even if the unit is in standby
mode. This setting is effective only for an input
selector to which an HDMI jack is assigned in
"HDMI Input". It cannot be set to any other input
selector unless an HDMI jack is assigned to it.
"Off": The setting is disabled. Video of device
connected to any jack will not be displayed.
"BD/DVD", "CBL/SAT", "STB/DVR", "GAME",
"PC", "AUX", "TV/CD", "PHONO": Video of the
device connected to the HDMI IN jack assigned
to each input will be displayed on the TV.
"Last": Video of the device connected to the
HDMI IN jack assigned to the input selector that
was selected immediately before the unit enters
standby mode will be displayed on the TV.
"Auto": Video of all the devices connected to the
HDMI IN jacks will be output to the TV.
"Auto (Eco)": Video of all the devices connected
to the HDMI IN jacks will be output to the TV.
If you select this setting when using a CECcompatible TV, you can reduce the power
consumption in standby mode.
r When "HDMI Through" is enabled, the power
consumption increases even when the unit
is on standby. However, the increase in
power consumption is kept to a minimum
by automatically entering the HYBRID
STANDBY mode, where only the essential
circuit is operating.
r "Auto" and "Auto(Eco)" cannot be selected if
"HDMI CEC (RIHD)" is set to "Off".
r When changing the setting, turn off and
then on again the power of all connected
components.
Audio TV Out (MAIN) Off
34
Default Value
Setting Details
You can enjoy audio through the speakers of the
HDMI connected TV while this unit is on.
"On": Use this function
"Off": Do not use this function
r If you select "On", set "HDMI CEC (RIHD)" to
"Off."
r The setting is fixed to "Auto" if "HDMI CEC
(RIHD)" is set to "On".
r Listening mode cannot be changed if "Audio
TV Out (MAIN)" is set to "On" and audio is
being output through the speakers of the TV.
r Depending on your TV set or input signal of
the component, audio may not output through
the speakers of the TV even if this setting is
set to "On". In such case, audio is output from
the speakers of the unit.
r If you operate the MASTER VOLUME control
of the unit when "Audio TV Out (MAIN)"
or "HDMI CEC (RIHD)" is set to "On" and
you are listening to the audio through the
speakers of your TV, audio will be output from
the unit. If you do not want to output audio
from the unit, change the unit or TV settings,
or reduce the volume of the unit.
r The setting is fixed to "Off" if "1.|Input/Output
Assign" - "Monitor Out" is set to "SUB".
Advanced Settings
Setting item
Default Value
Setting Details
Setting item
Default Value
Setting Details
Audio TV Out (SUB)
Off
You can enjoy audio through the speakers of the
HDMI connected TV while this unit is on.
"On": Use this function
"Off": Do not use this function
r Listening mode cannot be changed while
"Audio TV Out (SUB)" is set to "On" and
audio is being output through the speakers of
the TV.
r Depending on your TV set or input signal of
the component, audio may not output through
the speakers of the TV even if this setting is
set to "On". In such case, audio is output from
the speakers of the unit.
r If you operate the MASTER VOLUME control
of the unit when "Audio TV Out (SUB)" or
"HDMI CEC (RIHD)" is set to "On" and
you are listening to the audio through the
speakers of your TV, audio will be output from
the unit.. If you do not want to output audio
from the unit, change the unit or TV settings,
or reduce the volume of the unit.
r The setting is fixed to "Off" if "1.|Input/Output
Assign" - "Monitor Out" is set to "MAIN".
InstaPrevue
Sub Window
Multi
Change the preview display of the video input
through HDMI, which will be displayed using
"InstaPrevue" in the HOME menu.
Set how to display preview thumbnails.
"Multi": Displays all the thumbnails of HDMI IN1,
2, 3, 4 and Front at once.
"Single": Displays each thumbnail individually.
r Depending on the video source, the preview
thumbnails configured in "InstaPrevue" may
not be displayed properly.
InstaPrevue
Position
Bottom/Lower
Right
Change the preview display of the video input
through HDMI, which will be displayed using
"InstaPrevue" in the HOME menu.
Set the position to display preview thumbnails.
When "Multi" is selected for "Sub Window":
Select from "Top", "Bottom", "Left" and "Right".
When "Single" is selected for "Sub Window":
Select from "Upper Left", "Upper Right", "Lower
Left" and "Lower Right".
r Depending on the video source, the preview
thumbnails configured in "InstaPrevue" may
not be displayed properly.
Audio Return
Channel
-
You can enjoy sound of the HDMI connected
ARC compatible TV through the speakers
connected to the unit. To use this function, set
"HDMI CEC (RIHD)" to "On" in advance.
"Auto": When enjoying the TV sound through the
speakers connected to the unit
"Off": When not using the ARC function
Lip Sync
On
This setting automatically corrects any
desynchronization between the video and audio
signals based on data from the HDMI LipSync
compatible TV.
"On": Automatic correction will be enabled.
"Off": Automatic correction will be disabled.
35
Advanced Settings
Auto Standby
Network
Setting item
Default Value
Setting Details
Auto Standby
On/Off
This setting places the unit on standby
automatically after 20 minutes of inactivity
without any video or audio input.
"On": The unit will automatically enter standby
mode ("ASb" will light).
"Off": The unit will not automatically enter
standby mode.
r "Auto Standby" is appeared on the display
and menu screen 30 seconds before the
Auto Standby comes on.
r "Auto Standby" does not work when Zone 2
is active.
r Default values vary depending on the
regions.
HDMI Through
Off
Enable or disable "Auto Standby" while "HDMI
Through" is on.
"On": The setting will be enabled.
"Off": The setting will be disabled.
r This setting cannot be set to "On" if "Auto
Standby" is set to "Off".
r When "HDMI Through" is used, the power consumption increases even when the unit is on standby.
However, the increase in power consumption is kept to a minimum by automatically entering the
HYBRID STANDBY mode, where only the essential circuit is operating.
36
Make the network setting.
r When LAN is configured with a DHCP, set "DHCP" to "Enable" to configure the
setting automatically. ("Enable" is set by default) To assign fixed IP addresses to each
components, you must set "DHCP" to "Disable" and assign an address to this unit in
"IP Address" as well as set information related to your LAN, such as Subnet Mask and
Gateway.
Setting item
Default Value
Setting Details
Network Standby
Off
You can turn on the power of the unit via
network using an application such as Onkyo
Remote.
"On": Use this function
"Off": Do not use this function
r When "Network Standby" is used, the power
consumption increases even when the unit
is on standby. However, the increase in
power consumption is kept to a minimum
by automatically entering the HYBRID
STANDBY mode, where only the essential
circuit is operating.
Wi-Fi
Off (Wired)
Connect the unit to network via wireless LAN
router.
"On": Wireless LAN connection
"Off (Wired)": Wired LAN connection
Wi-Fi Setup
–
You can configure wireless LAN settings by
pressing ENTER when "Start" is displayed.
Wi-Fi Status
–
The information of the connected access point
will be displayed.
"SSID": SSID of the connected access point.
"Security": Security method of the connected
access point.
"Signal": Signal strength of the connected
access point.
"Status": Status of the connected access point.
MAC Address
–
This is the MAC address of the AV receiver.
This value is specific to the component and
cannot be changed.
Advanced Settings
Setting item
Default Value
Setting Details
DHCP
Enable
"Enable": Auto configuration by DHCP
"Disable": Manual configuration without DHCP
r If selecting "Disable", you must set "IP
Address", "Subnet Mask", "Gateway", and
"DNS Server" manually.
IP Address
–
Displays/Sets the IP address.
Subnet Mask
–
Displays/Sets the subnet mask.
Gateway
–
Displays/Sets the gateway.
DNS Server
–
Displays/Sets the primary DNS server.
Proxy URL
–
Displays/Sets the proxy server URL.
Proxy Port
–
Displays/Sets the proxy server port number
when you enter "Proxy URL".
Network Check
–
You can check the network connection.
Press ENTER when "Start" is displayed.
Bluetooth
Setting item
Default Value
Setting Details
Bluetooth
On
Select whether or not to use the Bluetooth
function.
"On": Enables connection with a Bluetoothenabled device by using the Bluetooth function.
Select "On" also when making various Bluetooth
settings.
"Off": When not using the Bluetooth function
Direct Change
On
The input of the unit will automatically be
switched to "BLUETOOTH" when connection is
made from a Bluetooth-enabled device to the
unit.
"On": The input will automatically become
"BLUETOOTH" when a Bluetooth-enabled
device is connected.
"Off": The function is disabled.
r If the input is not switched automatically, set
to "Off" and change the input manually.
Auto Reconnect
On
This function automatically reconnects to the
Bluetooth-enabled device connected last when
you change the input selector to "BLUETOOTH".
"On": Use this function
"Off": Do not use this function
r This function may not work depending on
your Bluetooth-enabled device.
Wakeup via
Bluetooth
Off
This function wakes up the unit on standby by
connecting a Bluetooth-enabled device.
"On": Use this function
"Off": Do not use this function
r Setting to "On" increases the power
consumption even when the unit is on
standby. However, the increase in power
consumption is kept to a minimum by
automatically entering the HYBRID
STANDBY mode, where only the essential
circuit is operating.
r "Wakeup via Bluetooth" is fixed to "Off" if
"Direct Change" is set to "Off".
r Wait for a while if "Network" cannot be selected. It will appear when the network function is started up.
37
Advanced Settings
Setting item
Default Value
Setting Details
Pairing Information
–
When paring is performed, the information of
the previous pairing stored in this unit will be
initialized.
Pressing ENTER when "Clear" is displayed
initializes the pairing information stored in this
unit.
r This function does not initialize the pairing
information on the Bluetooth-enabled device.
When pairing the unit again with the device,
be sure to clear the pairing information on
the Bluetooth-enabled device in advance.
For information on how to clear the pairing
information, refer to the Bluetooth-enabled
device's instruction manual.
Device
–
Displays the name of the Bluetooth-enabled
device connected to the unit.
r The name is not displayed when "Status" is
"Ready" and "Now Pairing ...".
Status
–
Displays the status of the Bluetooth-enabled
device connected to the unit.
"Ready": Not paired
"Now Pairing ...": Paired
"Connected": Successfully connected
r Wait for a while if "Bluetooth" cannot be selected. It will appear when the network function is started
up.
38
Firmware Update
Setting item
Default Value
Setting Details
Update Notice
Enable
Availability of a firmware update will be notified
via network.
"Enable": Notify updates
"Disable": Do not notify updates
Version
–
The current firmware version will be displayed.
Update via NET
–
Press ENTER to select when you want to
update the firmware via network.
r You will not be able to select this setting if
you do not have Internet access or there is
nothing to update.
Update via USB
–
Press ENTER to select when you want to
update the firmware via USB.
r You will not be able to select this setting if
a USB storage device is not connected or
there is nothing to update in the USB storage
device.
r Wait for a while if "Firmware Update" cannot be selected. It will appear when the network function is
started up.
Initial Setup
You can make the initial setup from the setup menu.
r Setting is not possible if "1.|Input/Output Assign" - "Monitor Out" is set to "SUB".
r Wait for a while if "Initial Setup" cannot be selected. It will appear when the network
function is started up.
Advanced Settings
8.Remote Controller Setup
Setting item
Default Value
Setting Details
Remote ID
1
Select an ID for the unit's remote controller from
"1", "2", and "3" to prevent interference between
the unit and other Onkyo components that are
installed in the same room. After changing
the ID on the main unit, change the ID on the
remote controller accordingly with the following
procedure.
1. While holding down RCV, press Q SETUP
for about 3 seconds until the remote
indicator lights.
2. With the number buttons, press one of 1, 2,
and 3. The remote indicator flashes twice.
Remote Mode Setup
–
Input and register the remote controller code of
other devices.
r For registration of the remote control code,
refer to "Operating Other Components with
the Remote Controller".
Setting item
Default Value
Setting Details
Setup
Unlocked
The Setup menu will be locked to protect the
settings.
"Locked": The menu is locked.
"Unlocked": The menu is unlocked.
9.Lock Setup
39
Operating Other Components Using Remote Controller
1. Press RCV and then press HOME on the remote
Operating Other Components
Using Remote Controller
controller.
Functions of REMOTE MODE Buttons
You can control any other device than this unit by
programming a specified remote control code to a
REMOTE MODE button of the remote controller. Register
a remote control code to a desired REMOTE MODE button
and press it to enter the remote mode that allows you to
operate the corresponding device.
2. With the cursors, select "Setup", and then press ENTER.
3. With the cursors, select "8.|Remote Controller Setup" "Remote Mode Setup" and press ENTER.
4. With the cursors, select the remote mode for which
½ The RCV and ZONE2 buttons cannot be programmed.
Programming Remote Control Codes
For information on the configuration and operation of
Onkyo components with RI jack, refer to "Connecting
and Operating Onkyo RI Components". Furthermore, the
following REMOTE MODE buttons are preprogrammed with
remote control codes.
BD/DVD: Onkyo Blu-ray Disc/DVD player
TV/CD: Onkyo CD player
STB/DVR: Apple TV
„
Searching in the Setup Menu
You can search a remote control code and register it to a
desired REMOTE MODE button in the unit's Setup menu.
40
you want to register a remote control code and press
ENTER to display the sub-category selection screen.
5. With the cursors, select the target sub-category, and
then press ENTER to display the brand name input
screen.
6. Select a character with the cursors and press ENTER.
Repeat it to enter the first three characters of the brand
name.
7. With the cursors, select "Search", and then press
ENTER.
r After a search is done, the list of possible brand
names is displayed. If the brand name list is not
displayed, select "Not Listed" with the cursors and
press ENTER to return to the brand name input
screen in step 6.
8. With the cursors, select the target brand name, and then
press ENTER.
r Once you decided the corresponding brand name,
the remote control code of the brand and how to
register it will be displayed on the TV screen.
9. Follow the guidance displayed on the TV screen.
10. If the component can successfully be operated with its
registered remote control code, select "OK" with the
cursors and press ENTER.
r Only TV remote control codes can be entered for TV.
r Program a remote control code in accordance
with the input since each button also works as the
input selector. (For example, when the CD player is
connected to the TV/CD jack, program the remote
control code for the CD player to TV/CD)
r If the component cannot be operated, select "Try
Next Code" with the cursors and press ENTER to
display another code.
r It is possible to operate an MHL-enabled mobile
device with the unit's remote controller by registering
the code of the MHL-enabled mobile device below
to the unit's remote controller. Operation may be
unstable or incorrect depending on the mobile device
used.
33101 (North American and Taiwanese models)
32910 (European, Australian and Asian models)
„
Consulting the Remote Control Code List
Find the remote control code in the remote control code list.
1. Look up the Remote Control Code List for the
corresponding remote control code.
r The codes in the Remote Control Code List are
those known as of the date of publication and may
be changed.
r Only TV remote control codes can be entered for TV.
r Program a remote control code in accordance
with the input since each button also works as the
input selector. (For example, when the CD player is
connected to the TV/CD jack, program the remote
control code for the CD player to TV/CD)
2. Press DISPLAY for 3 or more seconds while holding
down the REMOTE MODE button to which you want to
register the remote control code.
r Once you entered the input mode, the remote
indicator will light.
Operating Other Components Using Remote Controller
3. With the number buttons, enter the 5-digit remote control
code within 30 seconds.
r The registration is complete when the remote
indicator flashes twice. The remote indicator flashes
once slowly when registering the remote control
code fails. Try the registration again.
„
Remapping the Colored Buttons
„
Resetting the REMOTE MODE Buttons
The colored button assignment on the AV receiver's remote
controller can be remapped to match that on the remote
controller of the component whose remote control code you
programmed to REMOTE MODE. However, you will not be
able to remap the colored buttons if Zone 2 is selected.
You can reset the remote control code registered in the
REMOTE MODE button to its default status. This operation
can be executed on a single REMOTE MODE button.
1. Hold down the REMOTE MODE button to map and A
1. Press HOME for 3 or more seconds while holding down
the REMOTE MODE button you want to reset.
r The remote indicator will light.
(Red) simultaneously until the remote indicator lights
(about 3 seconds).
r Remapping is possible only for codes included in the
categories of the Remote Control Code List such as
DVD player and TV.
2. Within 30 seconds, press the REMOTE MODE button
again.
r Reset is complete when the remote indicator flashes
twice.
2. Within 30 seconds, press the colored buttons from left to
right, in the order you want to remap.
r For example, if the colored buttons on the remote
controller of the other component are yellow, green,
blue, and red from left to right, press the buttons on
the AV receiver's remote controller in that order.
r Programming is complete when the remote indicator
flashes twice. The remote indicator flashes once
slowly when programming the remote control code
fails. Try the remapping again.
r Pressing any other button than a colored button
cancels the remap operation.
To reset all the remote controller settings, while holding
down RCV, press and hold down HOME until the remote
indicator lights (about 3 seconds). Press RCV again within
30 seconds. Reset is complete when the remote indicator
flashes twice.
41
Operating Other Components Using Remote Controller
TV operation
G
Press the REMOTE MODE button programmed with
the remote control code for the relevant AV component
to switch the remote controller mode to that for the AV
component. Then, operate by using the corresponding
buttons. Available buttons vary depending on the product
category of the component. Operation may be incorrect or
impossible depending on the product.
H
J
½ Not CEC-compatible.
4
1 REMOTE MODE
2 , INPUT, VOL /
3 MUTING
4 CH +/5
8
6
7
9
Blu-ray Disc player/DVD player/DVD recorder
operation
Press the REMOTE MODE button programmed with
the remote control code for the relevant AV component
to switch the remote controller mode to that for the AV
component. Then, operate by using the corresponding
buttons. Available buttons vary depending on the product
category of the component. Operation may be incorrect or
impossible depending on the product.
2
1
GUIDE
/ / / , ENTER
SETUP
PREV CH
RETURN
AUDIO (¼)
42
9
3
4
1 REMOTE MODE
2 SOURCE
3 MUTING
4 CH +/-, DISC +/-
5
6
7
8
9
F
TOP MENU
/ / / , ENTER
SETUP
MENU
RETURN
AUDIO (¼)
G
F
5
6
7
8
9
F
6
7
F
3
2
8
I
, , ,
,
,
,
(¼)
G
H A (Red) (¼), B (Green) (¼), C (Yellow) (¼), D (Blue) (¼)
I Number 1 to 9, 0, +10
J CLR, DISPLAY
1
5
H
I
J
, , ,
,
,
,
G
H A (Red) (¼), B (Green) (¼), C (Yellow) (¼), D (Blue) (¼)
I Number 1 to 9, 0, +10 (¼)
J CLR, DISPLAY
½ Not CEC-compatible. ("A (Red), B (Green), C (Yellow), D (Blue)" are
intended only for "DVD player/DVD recorder")
Operating Other Components Using Remote Controller
VCR/PVR operation
F
Press the REMOTE MODE button programmed with
the remote control code for the relevant AV component
to switch the remote controller mode to that for the AV
component. Then, operate by using the corresponding
buttons. Available buttons vary depending on the product
category of the component. Operation may be incorrect or
impossible depending on the product.
2
1
3
4
1 REMOTE MODE
2 SOURCE
3 MUTING
4 CH +/5
8
6
7
9
5
8
6
7
9
F
G
H
, , ,
,
,
F
G Number 1 to 9, 0, +10
H CLR, DISPLAY
,
5
6
7
8
9
F
GUIDE
/ / / , ENTER
SETUP
PREV CH
RETURN
AUDIO
Satellite receiver / Cable receiver operation
G
Press the REMOTE MODE button programmed with
the remote control code for the relevant AV component
to switch the remote controller mode to that for the AV
component. Then, operate by using the corresponding
buttons. Available buttons vary depending on the product
category of the component. Operation may be incorrect or
impossible depending on the product.
H
2
I
J
, , ,
,
,
,
G
H A (Red) B (Green), C (Yellow), D (Blue)
I Number 1 to 9, 0, +10
J CLR, DISPLAY
1
3
5 GUIDE
6 / / / , ENTER
7 SETUP
8 PREV CH
9 RETURN
4
1 REMOTE MODE
2 SOURCE
3 MUTING
4 CH +/-
43
Operating Other Components Using Remote Controller
CD player operation
To operate CEC-compatible components
7
Press the REMOTE MODE button programmed with
the remote control code for the relevant AV component
to switch the remote controller mode to that for the AV
component. Then, operate by using the corresponding
buttons. Available buttons vary depending on the product
category of the component. Operation may be incorrect or
impossible depending on the product.
2
1
3
4
1 REMOTE MODE
2 SOURCE
3 MUTING
4 DISC +/-
The TV and BD/DVD buttons on the remote controller
are preprogrammed with remote control codes for linked
operation of some CEC (Consumer Electronics Control)compatible TV sets and Blu-ray Disk players. By connecting
to the unit via HDMI, you may operate them using the AV
receiver's remote controller.
r If you cannot operate your CEC-compatible component,
program one of the following remote control codes to the
TV or BD/DVD button.
TV: 11807/13100/13500 (CEC-compatible TV)
BD/DVD: 32910/33101/33501/31612 (CEC-compatible
BD/DVD player)
8
9
F
, , ,
,
,
,
7
8 SEARCH, REPEAT, RANDOM, MODE
9 Number 1 to 9, 0, +10
F CLR, DISPLAY
Cassette tape deck operation
Press the REMOTE MODE button programmed with
the remote control code for the relevant AV component
to switch the remote controller mode to that for the AV
component. Then, operate by using the corresponding
buttons. Available buttons vary depending on the product
category of the component. Operation may be incorrect or
impossible depending on the product.
2
5
6
1
5 / / / , ENTER
6 SETUP
3
1 REMOTE MODE
2 SOURCE
3 MUTING
4
4
44
,
(Reverse Playback),
,
,
,
,
Advanced Speaker Connection
2 With the cursors, select "Setup", and then press
ENTER.
Advanced Speaker Connection
3 With the cursors, select the order of "2.|Speaker
Setup" – "Speaker Settings" – "Front Speakers Type".
4 Select "Bi-Amp" with the cursors and press ENTER.
Bi-Amping
It is possible to connect speakers supporting bi-amping to
improve quality of the low and high pitched ranges. Up to
5.2 ch will be played in bi-amping.
r Before bi-amping, be sure to remove the shortcircuit connector that connects the tweeter (high
pitched tone) terminal and the woofer (low pitched
tone) terminal.
r Use speakers supporting bi-amping only. For
details, refer to the speakers' instruction manual.
„
Connections
1. Connect as below using the FRONT terminals and
BACK or HEIGHT terminals.
Tweeter
(high pitched tone)
Woofer
(low pitched tone)
Front R
Front L
2. Turn the unit on and make the bi-amping setting.
1 After pressing RCV, press HOME on the remote
controller.
45
Connecting and Operating Onkyo RI Components
r The RCV, ZONE2, and TV buttons cannot be
programmed.
RI Connection and Setting
Connecting and Operating
Onkyo RI Components
About RI Function
L
Connecting an Onkyo component with RI jack such as the
separately sold RI Dock to the unit by using an RI cable
and an analog audio (RCA) cable enables the following RI
functions:
R
System On / Auto Power On: Starting playback on a
component connected via RI when the unit is on standby
mode, automatically turns on the unit to select the relevant
component as its input source.
Direct Change: When playback is started on a component
connected via RI, the unit selects that component as the
input source.
Remote Controller Operation: Allows you to operate RIcompatible Onkyo components using the AV receiver's
remote controller. Point the remote controller at remote
control sensor of the unit. This operation is possible only
when the RI remote control code is programmed.
r Some components may not support all RI functions.
r These functions do not work when Zone 2 is turned on.
r For information on the RI functions, also refer to each
component's instruction manual.
Connect an Onkyo component with RI jack to this unit using
an RI cable and an analog audio (RCA) cable. For details,
refer to the instruction manual of the component with RI
jack. The RI cable can be connected in any order. When
there are two RI jacks, both jacks work in the same way
and are interchangeable.
To connect the RI Dock or cassette tape deck via RI, you
must:
„
Rename the input selector
To make the RI functions work, you must rename the input
selectors on the unit. Press TV/CD or GAME to display
"TV/CD" or "GAME" on the main unit display. Then press
and hold TV/CD or GAME 3 seconds or more to switch the
display to "DOCK" or "TAPE".
„
Program the RI remote control code
Program the remote control code to any REMOTE MODE
button on the remote controller. This will allow you to
operate the component by pointing the remote controller at
the unit instead of the component.
1. Press DISPLAY for 3 or more seconds while holding
down the REMOTE MODE button to which you want to
program the remote control code.
r The remote indicator will light.
46
2. With the number buttons, enter the following 5-digit
remote control code within 30 seconds.
RI Dock: 81993
Cassette tape deck with RI jack: 42157
r Programming is complete when the remote indicator
flashes twice. The remote indicator flashes once
slowly when programming the remote control code
fails. Try again.
Change the input selector on the RI Dock to "DOCK"
or "TAPE". For details, refer to the RI Dock's instruction
manual.
To operate Onkyo components directly or Onkyo
components that are not connected via RI, use the
following remote control codes:
Onkyo DVD player: 30627
Onkyo CD player: 71817
RI Dock: 82990
r With some models, operation may be not possible in
part or not possible at all.
Connecting and Operating Onkyo RI Components
iPod/iPhone Operation
The RI Dock allows you to use the AV receiver's remote
controller to operate and play music on your iPod/iPhone.
Moreover, it also allows you to view videos on your iPod/
iPhone on the screen of your TV, as well as perform RI
operations if connected via RI. This operation is possible
only when the RI remote control code is programmed.
Before Operation: Before performing any operation on
your iPod/iPhone, make sure to have it updated to the
latest version via iTunes. Certain buttons may not work for
some iPod/iPhone models and generations, or RI Dock. For
details on the operation, refer to the RI Dock's instruction
manual.
Switch the remote controller mode by pressing the
REMOTE MODE button programmed with the remote
control code for the iPod/iPhone, and operate by using the
corresponding buttons. Point the remote controller at the
unit.
8
7
6 TOP MENU
7 / / / , ENTER, PLAYLIST /
8 MENU
9
G
F
H
2
, , ,
,
,
9
F REPEAT, RANDOM
G MODE
H DISPLAY
3
r Pressing DISPLAY turns on the backlight for a few
seconds.
r MODE allows you to use the Resume function to
resume playing from the song that was playing when
you removed your iPod/iPhone from the DS-A2 RI Dock.
1
4
5
1
2
3
4
5
6
,
REMOTE MODE
SOURCE
MUTING
VOL /
ALBUM +/-
47
Firmware Update
Firmware Update
About Firmware Update
There are two methods for updating the firmware: via
network and via USB.
Use the one that best suits your environment.
r For the latest information on updates, visit the Onkyo
website.
r Before updating, make sure that the speaker setup
microphone is not connected.
r During an update, do not
– Disconnect and reconnect any cable, USB storage
device, speaker setup microphone or headphones,
or perform any operation on the component such as
turn off its power
– Access to this unit from a PC or smartphone using
Android application
r The update may take about 20 minutes to complete for
either method: via network or via USB.
Furthermore, existing settings are guaranteed
regardless of the method used for update.
Disclaimer: The program and accompanying online
documentation are furnished to you for use at your own
risk.
Onkyo will not be liable and you will have no remedy for
damages for any claim of any kind whatsoever concerning
your use of the program or the accompanying online
documentation, regardless of legal theory, and whether
arising in tort or contract.
In no event will Onkyo be liable to you or any third party for
any special, indirect, incidental, or consequential damages
of any kind, including, but not limited to, compensation,
reimbursement or damages on account of the loss of
present or prospective profits, loss of data, or for any other
reason whatsoever.
48
Updating the Firmware via Network
2. With the cursors, select "Setup" - "7.|Hardware Setup" -
Before Start:
r Check that the unit is turned on, and the connection to
the Internet is secured.
r Turn off the controller component (PC etc.) connected to
the network.
r Stop any playing Internet radio, USB storage device, or
server content.
r If multi-zone function is active, press OFF on the unit to
turn it off.
r If "HDMI CEC (RIHD)" is set to "On", set it to "Off"
(default value).
– After pressing RCV, press HOME on the remote
controller. Select "Setup" with the cursors and press
ENTER. Then, after selecting "7.|Hardware Setup"
- "HDMI" and pressing ENTER, select "HDMI CEC
(RIHD)" to select "Off".
"Firmware Update" - "Update via NET", and then press
ENTER.
r If "Firmware Update" is grayed out and cannot be
selected, wait for a while until it starts up.
r You will not be able to select "Update via NET" if
there is nothing to update.
3. Press ENTER with "Update" selected to start update.
r During the update, the TV screen may go black
depending on the updated program. In that case,
check the progress on the display of the unit. The TV
screen will remain black until the update is complete
and the power is turned on again.
r "Completed!" is displayed when the update is
complete.
4. Press ON/STANDBY on the main unit to turn the
unit into standby mode. This is the end of the firmware
update and you have now the latest firmware installed.
r Do not use RECEIVER on the remote controller.
½ The description may differ from the on-screen display but that will not
change the way to operate or the function.
„
Update
1. After pressing RCV, press HOME on the remote
controller.
The HOME menu is displayed on the TV screen.
HOME
Setup
Firmware Update
„
If an Error Message is Displayed
Updating the Firmware via USB
„
Update
When an error occurs, "¼-¼¼ Error!" is appeared on
the display of the unit. ("¼" represents an alphanumeric
character.) Check the following:
Before Start:
r Prepare a 64 MB or larger USB storage device.
– Media inserted in a USB card reader may not be
used for this function.
– USB storage devices with security function are not
supported.
– USB hubs and USB devices with hub function are not
supported. Do not connect these devices to the unit.
r Delete any data stored on the USB storage device.
r Turn off the controller component (PC etc.) connected to
the network.
r Stop any playing Internet radio, USB storage device, or
server content.
r If multi-zone function is active, press OFF on the unit to
turn it off.
r If "HDMI CEC (RIHD)" is set to "On", set it to "Off"
(default value).
– After pressing RCV, press HOME on the remote
controller. Select "Setup" with the cursors and press
ENTER. Then, after selecting "7.|Hardware Setup"
- "HDMI" and pressing ENTER, select "HDMI CEC
(RIHD)" to select "Off".
1. Connect the USB storage device to your PC.
Error Code
r ¿-01, ¿-10:
Ethernet cable not found. Connect the Ethernet cable
properly.
r ¿-02, ¿-03, ¿-04, ¿-05, ¿-06, ¿-11, ¿-13, ¿-14,
¿-16, ¿-17, ¿-18, ¿-20, ¿-21:
Internet connection error. Check the following:
– Whether the router is turned on
– Whether this unit and router are connected to the
network
Try to disconnect and then connect again the power
to the unit and router. This may solve the problem. If
you are still unable to connect to the Internet, the DNS
server or proxy server may be temporarily down. Check
the service status with your ISP provider.
r Others:
Disconnect then reconnect the AC power cord, from the
beginning.
½
Some USB storage devices may take long to load, may not be loaded
correctly, or may not be correctly fed depending on the device or their
content.
½
Onkyo will not be liable whatsoever for any loss or damage of data, or
storage failure arising from the use of the USB storage device with this
AV receiver. Thank you for your understanding.
½ The description may differ from the on-screen display but that will not
change the way to operate or the function.
2. Download the firmware file from the Onkyo website to
your PC and unzip.
Firmware files are named in the following way:
ONKAVR¼¼¼¼_¼¼¼¼¼¼¼¼¼¼¼¼.zip
Unzip the file on your PC. The number of unzipped files
and folders varies depending on the model.
3. Copy all unzipped files and folders to the root folder of
the USB storage device.
r Make sure to copy the unzipped files.
4. Press USB on the remote controller to select "USB".
5. Connect the USB storage device to the USB port of the
unit.
r If you connect a USB hard disk drive to the USB
port of the unit, we recommend that you use its AC
adapter to power it.
r If the USB storage device has been partitioned, each
section will be treated as an independent device.
49
Firmware Update
6. After pressing RCV, press HOME on the remote
controller.
„
If an Error Message is Displayed
The HOME menu is displayed on the TV screen.
HOME
Setup
7. With the cursors, select "Setup" - "7.|Hardware Setup" "Firmware Update" - "Update via USB", and then press
ENTER.
r If "Firmware Update" is grayed out and cannot be
selected, wait for a while until it starts up.
r You will not be able to select "Update via USB" if
there is nothing to update.
8. Press ENTER with "Update" selected to start update.
r During the update, the TV screen may go black
depending on the updated program. In that case,
check the progress on the display of the unit. The TV
screen will remain black until the update is complete
and the power is turned on again.
r During the update, do not turn off, or disconnect then
reconnect the USB storage device.
r "Completed!" is displayed when the update is
complete.
9. Disconnect the USB storage device from the unit.
10. Press ON/STANDBY on the main unit to turn the
unit into standby mode. This is the end of the firmware
update and you have now the latest firmware installed.
r Do not use RECEIVER on the remote controller.
50
When an error occurs, "¼-¼¼ Error!" is appeared on
the display of the unit. ("¼" represents an alphanumeric
character.) Check the following:
Error Code
r ¿-01, ¿-10:
USB storage device not found. Check whether the USB
storage device or USB cable is correctly inserted to the
USB port of the unit.
Connect the USB storage device to an external power
source if it has its own power supply.
r ¿-05, ¿-13, ¿-20, ¿-21:
The firmware file is not present in the root folder of the
USB storage device, or the firmware file is for another
model. Retry from the download of the firmware file.
r Others:
Disconnect then reconnect the AC power cord, from the
beginning.
Troubleshooting
■ How to reset the remote controller
Troubleshooting
Before starting the procedure
Problems may be solved by simply turning the power on/off
or disconnecting/connecting the power cord, which is easier
than working on the connection, setting and operating
procedure. Try the simple measures on both the unit and
the connected device. If the problem is that the video or
audio is not output or the HDMI linked operation does not
work, disconnecting/connecting the HDMI cable may solve
it. When reconnecting, be careful not to wind the HDMI
cable since if wound the HDMI cable may not fit well. After
reconnecting, turn off and on the unit and the connected
device.
Resetting the unit
Resetting the unit to the status at the time of shipment may
solve the problem. If the measures above do not solve the
problem, reset the unit with the following procedure. If you
reset the unit status, your preferences will be reset to the
defaults. Note them down before starting reset.
■ How to reset
1. While holding down CBL/SAT on the main unit (note
that step 2 must be performed with this button pressed
down)
2. Press ON/STANDBY on the unit. "Clear" is appeared
on the display and the unit will enter standby mode.
Clear
2
1
1. While holding down 1RCV on the remote controller
(note that step 2 must be performed with this button
pressed down)
2. Press and hold down 2HOME until the 3 remote
indicator lights (about 3 seconds). Within 30 seconds,
press 1RCV again.
1
3
2
Power
■ Can not turn on the unit
r Make sure that the power cord is properly plugged into
the wall outlet.
r Unplug the power cord from the wall outlet, wait 5
seconds or more, then plug it in again.
■ The unit turns off unexpectedly
r The unit will automatically enter standby mode when
Auto Standby has been set and launches.
■ The unit turns off and after restoring the power, it
turns off again
r The protection circuit has been activated. Remove
the power cord from the wall outlet immediately. Make
sure that all speaker cables and input sources are
properly connected, and leave the unit with its power
cord disconnected for 1 hour. After that, reconnect the
power cord and turn the power on. If the unit turns off
again, avoid resetting it and unplug the power cord. Then
contact your Onkyo dealer.
Caution: If "CHECK SP WIRE" is appeared on the display,
the speaker cables may be shorting.
WARNING: If smoke, smell or abnormal noise is produced
by the unit, unplug the power cord from the wall outlet
immediately and contact the dealer or Onkyo Support.
Audio
■ There is no sound, or it is very quiet
r Make sure that the proper input source is selected.
r Make sure that connecting plugs are pushed in all the
way.
r Make sure that the inputs and outputs of all components
are connected properly.
r Make sure that the polarity of the speaker cables is
correct, and that no bare wires are in contact with the
metal part of speaker terminals.
r Make sure that the input source is properly selected.
r Make sure that the speaker cables are not shorting.
r Check the volume. The volume level is adjustable
between Min, 1 to 79, Max (80). It is normal that the unit
volume level is set up to 40 or around.
r If the MUTING indicator on the display flashes, press
MUTING on the remote controller to unmute the unit.
r While headphones are connected to the PHONES jack,
no sound is output from the speakers.
r If there is no sound from a BD/DVD player connected to
an HDMI IN, check the BD/DVD player’s output settings,
and be sure to select a supported audio format.
r Check the digital audio output setting on the connected
component. On some game consoles, such as those
that support DVD, the default setting is off.
r With some DVD-Video discs, you need to select an
audio output format from a menu.
r If your turntable uses an MC cartridge, you must
connect an MC head amp, or an MC transformer.
r Make sure that none of the connecting cables are bent,
twisted, or damaged.
r Not all listening modes use all speakers.
r Specify the speaker distances and adjust the individual
speaker levels.
r Make sure that the speaker setup microphone is not still
connected.
r Set to "Off" if "Audio Selector" - "Fixed Mode" is set to
"PCM" or "DTS".
■ Only the front speakers produce sound
r When the Stereo or Mono listening mode is selected,
only the front speakers and subwoofer produce sound.
r Make sure the speakers are configured correctly.
51
Troubleshooting
■ Only the center speaker produces sound
r If you use the Dolby Surround listening mode with a
mono source, such as an AM radio station or mono
TV program, the sound is concentrated in the center
speaker.
r Make sure the speakers are configured correctly.
■ The surround speakers produce no sound
r When the T-D (Theater-Dimensional), Stereo or Mono
listening mode is selected, the surround speakers
produce no sound.
r Depending on the source and current listening mode,
not much sound may be produced by the surround
speakers. Try selecting another listening mode.
r Make sure the speakers are configured correctly.
■ The center speaker produces no sound
r When the Stereo or Mono listening mode is selected,
the center speaker produces no sound.
r Make sure the speakers are configured correctly.
■ There is no sound from surround back speakers or
height speakers.
r Depending on the source or current listening mode, not
much sound may be output from speakers. Try selecting
another listening mode.
r Make sure the settings for the speakers are made
correctly.
■ The subwoofer produces no sound
r When you play source material that contains no
information in the LFE channel, the subwoofer produces
no sound.
r Make sure the speakers are configured correctly.
■ There is no sound with a certain signal format
r When listening to Dolby Digital and/or DTS sound,
digital connection is necessary.
r Check the digital input terminal setting. If the connection
is different from the default, re-setting is necessary.
r Check the digital audio output setting on the connected
component. On some game consoles, such as those
that support DVD, the default setting is off.
■ There is no sound with Dolby Atmos signal format
r Make sure the surround back speakers or the height
speakers are connected and configured as connected in
52
the "Speaker Configuration".
r Make sure the input signal is the Dolby Atmos format.
■ Can not select the Pure Audio listening mode
(European, Australian and Asian models)
r The Pure Audio listening mode can not be selected
while Zone 2 is on.
■ Can not select a desired listening mode
r Depending on the connecting status of the speaker,
some listening modes may not be selected. Check the
details in "Using the Listening Modes" section.
r With some CD and LD players, you will not be able
to playback DTS material properly even though your
player is connected to a digital input on the unit. This is
usually because the DTS bitstream has been processed
(e.g., output level, sampling rate, or frequency response
changed) and the unit does not recognize it as a
genuine DTS signal. In such cases, you may hear noise.
r Playing DTS program material, using the pause, fast
forward, or fast reverse function on your player may
produce a short audible noise. This is not a malfunction.
■ Can not play 5.2 ch
r Make sure the speakers are configured correctly.
r Not all listening modes use all speakers.
■ The beginning of audio received by an HDMI IN can
not be heard
r Since it takes longer to identify the format of an HDMI
signal than it does for other digital audio signals, audio
output may not start immediately.
■ Can not get 6.2 ch/7.2 ch playback
r 6.2 ch/7.2 ch playback is not possible if surround back
speakers and height speakers are not connected.
r Depending on the number of connected speakers, it is
not always possible to select all of the listening modes.
Video
■ The speaker volume cannot be set as required
r Check to see if a maximum volume has been set.
■ Noise can be heard
r Using cable ties to bundle analog audio (RCA) cables
with power cords, speaker cables, etc. may degrade the
audio performance, so refrain from doing it.
r An analog audio (RCA) cable may be picking up
interference. Try repositioning your cables.
■ The Late Night function does not work
r Make sure the source material is Dolby Digital, Dolby
Digital Plus, or Dolby TrueHD.
■ About DTS signals
r When DTS program material ends and the DTS
bitstream stops, the unit remains in DTS listening mode
and the dts indicator remains on. This is to prevent noise
when you use the pause, fast forward, or fast reverse
function on your player. If you switch your player from
DTS to PCM, you may not hear any sound because the
unit does not switch formats immediately. In such case,
you should stop your player for about 3 seconds and
then resume playback.
■ There is no picture
r Make sure that all video connecting plugs are pushed in
all the way.
r Make sure that each video component is properly
connected.
r If the TV is connected to the HDMI OUT jack of the unit,
set "Monitor Out" to "MAIN" or "SUB" according to the
output jack. If the playback source is connected to the
composite video jack or component video jacks and you
want to output the video to the TV via the HDMI OUT
jack, set "HDMI Input" to "-----".
r If the video source is connected to a component video
input, you must assign that input to an input selector,
and your TV must be connected to COMPONENT
VIDEO OUT terminal.
r If the video source is connected to a composite video
input, your TV must be connected to the MONITOR OUT
V terminal.
r If the video source is connected to an HDMI input, you
must assign that input to an input selector, and your TV
must be connected to the HDMI output(s).
r While the Pure Audio (European, Australian and Asian
models) listening mode is selected, the analog video
circuitry is turned off and only video signals input
through HDMI IN can be output.
Troubleshooting
r Make sure the switching of input screens is proper at the
monitor side such as a TV.
r When the image input from the composite video input
terminal does not get displayed, make sure that the
component video input terminal is not set to the selected
input. If selected, images input from the composite video
input terminal can not be output to this input switching. If
only composite video input terminal connection is used,
set the component video input terminal to "-----".
r Images of a component connected to the composite
video input terminal can not be output by converting on
the monitor of a TV or other components connected to
COMPONENT VIDEO OUT terminal.
r If the input selector to which the input from the TV
connected to the HDMI OUT SUB jack is connected
is changed on this unit when "Monitor Out" is set to
"MAIN+SUB", or "MAIN" and when outputting to Zone
2, the video from the TV connected to HDMI OUT MAIN
stops displaying.
r "Resolution" is effective only for the HDMI OUT MAIN
jack if "Monitor Out" is set to "MAIN+SUB".
■ There is no picture from a source connected to an
HDMI IN
r Reliable operation with an HDMI-to-DVI adapter is not
guaranteed. In addition, video signals from a PC are not
supported.
r Check if "Resolution Error" is displayed on the main
unit display when video input via HDMI IN jack is not
displayed. In this case, the TV does not support the
resolution of the video input from the player. Change the
setting on the player.
■ The on-screen menus do not appear
r On your TV, make sure that the video input to which this
unit is connected is selected.
r Set "On Screen Display" to "On" in "OSD Setup".
r When the unit is not connected to a TV via HDMI OUT
MAIN, on-screen menus are not displayed.
Tuner
■ Reception is noisy, FM stereo reception is noisy, or
the FM STEREO indicator does not light
r Re-check the antenna connection.
r Relocate your antenna.
r
r
r
r
r
Move the unit away from your TV or PC.
Passing cars and airplanes can cause interference.
Concrete walls weaken radio signals.
Listen to the station in mono.
When listening to an AM station, operating the remote
controller may cause noise.
r If nothing improves the reception, install an outdoor
antenna.
Remote Controller
■ The remote controller does not work
r Before operating this unit using remote controller, be
sure to press RCV.
r Make sure that the batteries are installed with the
correct polarity.
r Install new batteries. Do not mix different types of
batteries, or old and new batteries.
r Make sure that the remote controller is not too far away
from the unit, and that there is no obstruction between
the remote controller and the remote control sensor of
the unit.
r Make sure that the unit is not subjected to direct
sunshine or inverter-type fluorescent lights. Relocate if
necessary.
r If the unit is installed in a rack or cabinet with coloredglass doors or if the doors are closed, the remote
controller may not work reliably.
r Make sure you have selected the correct remote
controller mode.
r When using the remote controller to control other
manufacturers’ AV components, some buttons may not
work as expected.
r Make sure you have entered the correct remote control
code.
r Make sure to set the same ID on both the unit and
remote controller.
■ Operating other Onkyo component by using a RI
remote control code is not available
r Make sure that the Onkyo component is properly
connected with RI cable. When RI cable is used for
connection, make sure to connect analog audio (RCA)
cable as well. (Connecting only an RI cable will not be
enough.)
r Make sure you have selected the correct remote
controller mode.
r Make sure that the input display is correctly set.
r Input the RI remote control code again.
r When the RI remote control code is input, point the
remote controller at remote control sensor of the unit.
■ Can not operate Onkyo components (ones without
RI connection) and components of other makers
r Make sure that the connection with other components is
correct.
r Input a correct remote control code again. If there are
several codes, try each code.
r Make sure that the remote controller mode is correctly
selected.
r Operate the remote controller by setting toward the light
receiving section of each component.
r Some components may not start the operation.
RI Dock for iPod/iPhone
■ There is no sound
r Make sure your iPod/iPhone is actually playing.
r Make sure your iPod/iPhone is properly inserted in the
Dock.
r Make sure the unit is turned on, the correct input source
is selected, and the volume is turned up.
r Make sure the plugs are pushed in all the way.
r Try resetting your iPod/iPhone.
■ There is no video
r Make sure that your iPod/iPhone model’s TV OUT
setting is set to On.
r Make sure the correct input is selected on your TV or the
unit.
r Some versions of the iPod/iPhone do not output video.
■ The AV receiver’s remote controller does not control
my iPod/iPhone
r Make sure your iPod/iPhone is properly inserted in the
Dock. If your iPod/iPhone is in a case, it may not connect
properly to the Dock. Always remove your iPod/iPhone
from the case before inserting it into the Dock.
r The iPod/iPhone can not be operated while it is
displaying the Apple logo.
53
Troubleshooting
r Make sure you have selected the correct remote
controller mode.
r When you use the AV receiver’s remote controller, point
it toward this unit.
r Before operating with the remote controller, you may
need to play on your iPod/iPhone to make the input
selector be recognized.
r Try resetting your iPod/iPhone.
r Depending on your iPod/iPhone model and generation,
some buttons may not work as expected.
■ The unit unexpectedly selects my iPod/iPhone as the
input source
r Always pause iPod/iPhone playback before selecting
a different input source. If playback is not paused, the
Direct Change function may select your iPod/iPhone
as the input source by mistake during the transition
between tracks.
■ iPod/iPhone does not work properly
r Try reconnecting your iPod/iPhone.
Multi-zone Function
■ There is no sound
r With multi-zone function, sound is output only when the
signal input source is an external component connected
to the analog audio input jacks of the unit, "NET", "USB",
"BLUETOOTH", "AM" or "FM". Multi-zone playback is not
possible if the player and the unit are connected via HDMI
cable or digital cable. Connect the RCA audio output
jacks of the player and the analog audio input jacks of the
unit with analog audio (RCA) cable. Also analog audio
output setting may be necessary on the player.
Wi-Fi (Wireless LAN) Network
■ Cannot access to Wi-Fi (Wireless LAN) network or
sound playback is interrupted and communication
does not work
r Try plugging/unplugging the power supply of wireless
LAN router and the unit, check the wireless LAN router
power-on status, and try reboot of the wireless LAN
router.
54
r The setting of SSID and encryption (WEP, etc.) is not
correct. Make sure the network settings of the unit is
properly set.
r Connection to an SSID that includes multi-byte
characters is not supported. Name the SSID of the
wireless LAN router using single-byte alphanumeric
characters only and try again.
r Can not receive radio wave due to a bad connection.
Shorten the distance from wireless LAN access point
or remove obstacles for a good visibility, and try again.
Place the unit away from microwave ovens or other
access points. 2.4 GHz band for wireless LAN may not
be enough. Connect ETHERNET terminal of the unit
and the router via an Ethernet cable after selecting
"7.|Hardware Setup" - "Network" and changing "Wi-Fi" to
"Off (Wired)".
r Place the unit away from the components emitting
electromagnetic waves on the 2.4 GHz band (microwave
ovens, game consoles, etc.). If this does not solve the
problem, stop using other components which emit
electromagnetic waves.
r When other wireless LAN devices are used near the
unit, several issues such as interrupted playback and
communication may occur. You can avoid these issues
by changing the channel of your wireless LAN router. For
instructions on changing channels, see the instruction
manual provided with your wireless LAN router.
r If there is a metallic object near the unit, wireless LAN
connection may not be possible as the metal can effect
on the radio wave.
r If there is more than one access point in the network,
separate each access point.
r It is recommended to place the Wi-Fi router (access
point) and the unit in the same room.
■ The connection does not complete even when the
automatic setting button is pressed on the wireless
LAN router
r The wireless LAN router setting may be switched to
Manual. Return the setting to Auto.
r Try the manual set-up. The connection may succeed.
■ On the list of SSID on the TV menu screen, there is
no corresponding SSID
r When the wireless LAN router setting is at stealth mode
(mode to hide the SSID key) or when ANY connection is
off, the SSID is not displayed. Change the setting and try
again.
Bluetooth
■ Music playback is unavailable on the unit even after
successful Bluetooth connection
r Depending on the characteristics or specifications of
your Bluetooth-enabled device, playback on the unit is
not guaranteed.
r When the audio volume of your Bluetooth-enabled
device is set low, the playback of audio may be
unavailable. Volume up the Bluetooth-enabled device.
r Depending on the Bluetooth-enabled device, Send/
Receive selector switch may be provided. Select Send
mode.
r Even when a music file is playing on the Bluetoothenabled device, the sound can not be played if the
connection is not established with the unit. Make sure
that the unit is connected (this unit is selected as the
sound output destination).
■ Sound is interrupted
r Problem may be occurring at the Bluetooth-enabled
device. Check the information on a webpage.
■ The audio quality is poor after connection with a
Bluetooth-enabled device
r The Bluetooth reception is poor. Move the Bluetoothenabled device closer to the unit or remove any obstacle
between the Bluetooth-enabled device and this unit.
■ Can not connect with this unit
r Try plugging/unplugging the power of the unit and try
turning on/off the Bluetooth-enabled device. Re-startup
of the Bluetooth-enabled device may be effective.
r The Bluetooth-enabled device does not support the
profiles required for this unit.
r The Bluetooth function of the Bluetooth-enabled
device is not enabled. Refer to the user manual of the
Bluetooth-enabled device for how to enable the function.
r Near components such as microwave oven or cordless
phone, which use the radio wave in the 2.4 GHz range,
a radio wave interference may occur, which disables the
use of this unit.
Troubleshooting
■ Bluetooth connection can not be built
r When building a Bluetooth connection between this unit
and your Bluetooth-enabled device for the first time,
if the connection fails, select "7.|Hardware Setup" - "
Bluetooth", execute "Clear" in "Pairing Information", turn
off and then on again your Bluetooth-enabled device to
clear the device name, and build the connection again.
r If there is a metallic object near the unit, Bluetooth
connection may not be possible as the metal can effect
on the radio wave.
r If the wireless LAN and Bluetooth connections are
used at the same time, try to connect the ETHERNET
port and router with the Ethernet cable after selecting
"7.|Hardware Setup" - "Network" and changing "Wi-Fi" to
"Off (Wired)" for a better connection.
■ The Auto Reconnect function does not work
r This function may not work depending on your
Bluetooth-enabled device.
In this case, play on your Bluetooth-enabled device after
pairing with this unit.
NET/USB Function
■ Can not access the network server
r When NET is blinking, the AV receiver is not properly
connected to the home network.
r Make sure your network server has been started up.
r Make sure your network server is properly connected to
the home network.
r Make sure your network server is correctly set.
r Make sure that the router LAN side port is properly
connected to the AV receiver.
r Make sure that the correct IP address is allocated in
"7.|Hardware Setup" - "Network".
■ Playback stops while listening to music files on the
network server
r Make sure the network server is compatible with this
unit.
r When the PC is serving as the network server, try
quitting any application software other than the server
software (Windows Media® Player 12 etc.).
r If the PC is downloading or copying large files, the
playback may be interrupted.
■ Can not access the Internet radio
r Certain network service or contents available through
the unit may not be accessible in case the service
provider terminates its service.
r If a specific radio station is unavailable for listening,
make sure the registered URL is correct, or whether the
format distributed from the radio station is supported by
the AV receiver.
r When NET is blinking, the AV receiver is not properly
connected to the home network.
r Make sure that your modem and router are properly
connected, and make sure they are both turned on.
r Make sure that connecting to Internet from other
components is possible. If connecting is not possible,
turn off all components connected to the network, wait
for a while, and then turn on the components again.
r Make sure that the router LAN side port is properly
connected to the AV receiver.
r Make sure that the correct IP address is allocated in
"7.|Hardware Setup" - "Network".
r Depending on ISP, setting the proxy server is necessary.
r Make sure that the used router and/or modem is
supported by your ISP.
Others
■ Can not connect to the AV receiver from a Web
browser
r Make sure that the IP address of the AV receiver is
correctly input to the Internet browser.
r When DHCP is used for allocating the IP address, the IP
address of this AV receiver may have been changed.
r Make sure that both AV receiver and PC are properly
connected to the network.
■ The display does not work
r The display is turned off when the Pure Audio
(European, Australian and Asian models) listening mode
is selected.
■ USB storage device is not displayed
r Make sure that USB storage device and USB cable are
securely plugged to the USB port of this AV receiver.
r Remove the USB storage device from the AV receiver
once, and then try re-connecting.
r Performance of the hard disk that receives power from
the USB port of the unit is not guaranteed.
r Depending on the type of format, the playback may not
be performed normally. Check the type of the file formats
that is supported.
r USB storage device with security functions may not be
played.
■ Power consumption in standby mode
r In the following cases, the power consumption in
standby mode may reach up to a maximum of 5 W:
– When "Network Standby" in "7.|Hardware Setup" "Network" is set to "On".
– When "HDMI CEC (RIHD)" is set to "On". (Depending
on the TV status, the AV receiver will enter normal
standby mode.)
– The "HDMI Through" setting is set to other than "Off".
– When "Wakeup via Bluetooth" in "7.|Hardware Setup"
- "Bluetooth" is set to "On".
r The power consumption in standby mode may be larger
than the value above while the MHL (Mobile Highdefinition Link) enabled mobile device connected to the
AUX INPUT HDMI/MHL jack is being charged.
■ The sound changes when I connect my headphones
r When a listening mode other than Direct, Pure Audio
(European, Australian and Asian models), or Mono is
selected, connecting a headphone automatically selects
Stereo.
■ How do I change the language of a multiplex source
r Select "Main" or "Sub" for "Multiplex Input Channel" in
"3.|Audio Adjust" - "Multiplex/Mono".
■ The RI functions do not work
r To use RI, you must make an RI connection and an
analog audio (RCA) connection between the component
and AV receiver, even if they are connected digitally.
r While Zone 2 is selected, the RI functions do not work.
■ The functions System On/Auto Power On and Direct
Change do not work for components connected via RI
r These functions do not work when Zone 2 is turned on.
■ When performing Automatic Speaker Setup, the
measurement fails and the message "Ambient noise is
too high." is displayed.
r This can be caused by a malfunction in your speaker
unit. Check if the unit produces normal sounds.
55
Troubleshooting
■ The display is dark
r Make sure that Dimmer function is not working. Press
DIMMER button and change the brightness level of the
display.
■ The following settings can be made for the
composite video inputs
r While holding down the input selector button to
configure, press HOME once at a time until "Video ATT:
On" is appeared on the display. To resume the setup,
repeat the above described step until "Video ATT: Off" is
appeared on the display.
This setting is possible for input selectors assigned
with one of the video inputs "VIDEO 1" to "VIDEO 3" in
"1.|Input/Output Assign" - "Composite Video Input". If
you have a game console connected to the composite
video input, and the picture is not very clear, you can
attenuate the gain.
Video ATT|:|Off: (default).
Video ATT|:|On: (Gain is reduced by 2 dB.)
■ If the picture on your TV/monitor connected to the
HDMI output(s) is unstable
r Try turning the DeepColor function off.
To turn off the DeepColor function, press STB/DVR and
ON/STANDBY on the AV receiver simultaneously.
While holding down STB/DVR, press ON/STANDBY
repeatedly until "Deep Color: Off" is appeared on the
display. To reactivate the DeepColor function, repeat the
above described step until "Deep Color: On" is appeared
on the display.
The AV receiver contains a microPC for signal processing
and control functions. In very rare situations, severe
interference, noise from an external source, or static
electricity may cause it to lockup. In the unlikely event that
this happens, unplug the power cord from the wall outlet,
wait at least 5 seconds, and then plug it back in.
Onkyo is not responsible for damages (such as CD rental
fees) due to unsuccessful recordings caused by the unit’s
malfunction.
Before you record important data, make sure that the
material will be recorded correctly.
56
Before disconnecting the power cord from the wall outlet,
set the AV receiver to standby.
Reference Information
Reference Information
Linked Operation with CEC-compatible
Components
The AV receiver is compatible with the following
components (as of January 2014).
TV (Random order):
r Toshiba TV sets
r Sharp TV sets
Players/Recorders (Random order):
r Onkyo and Integra RIHD-compatible players
r Toshiba players and recorders
r Sharp players and recorders (only when used together
with Sharp TV sets)
Models other than those mentioned above may have some
interoperability if compatible with CEC, which is part of the
HDMI Standard, but operation can not be guaranteed.
Note: For RI functions to work properly, do not connect more RIHDcompatible components than the quantities specified below, to
the HDMI jack. RI functions are not guaranteed when more RIHDcompatible components than the below mentioned quantities are
connected. Furthermore, do not connect the AV receiver to another
AV receiver/AV amplifier via HDMI.
r Blu-ray Disc/DVD players: up to 3.
r Blu-ray Disc/DVD recorders: up to 3.
r Cable TV tuner, terrestrial digital tuner, and satellite broadcasting
tuner: up to 4 units.
Checking whether the HDMI Linked Operation
Settings Are Enabled
1. Turn on the power of all connected components.
2. Turn off the power of the TV, and confirm that the power
of the connected components is turned off automatically
with the link operation.
3. Turn on the power of the Blu-ray Disc/DVD player/
recorder.
4. Start playback on the Blu-ray Disc/DVD player/recorder,
and verify the following:
r The AV receiver automatically turns on, and selects the
input to which the Blu-ray Disc/DVD player/recorder is
connected.
r The TV automatically turns on, and selects the input
to which the AV receiver is connected.
5. Following the operating instructions of the TV, select
"Use the TV speakers" from the menu screen of the TV,
and confirm that the audio is output from the speakers of
the TV, and not from the speakers connected to the AV
receiver.
6. Select "Use the speakers connected from the AV
receiver" from the menu screen of the TV, and confirm
that the audio is output from the speakers connected to
the AV receiver, and not from the TV speakers.
Note:
r Even if you set to output audio on the TV speakers, audio will
be output from the speakers connected to the AV receiver when
you adjust the volume or switch the input on the AV receiver.
To output audio from the TV speakers, redo the corresponding
operations on the TV.
r In case of an RIHD connection with RI and RI audio control
compatible components, do not connect the RI cable at the
same time.
r On the TV, when you select anything other than the HDMI jack to
which the AV receiver is connected, the input on the AV receiver
will be switched to "TV/CD".
r The AV receiver will automatically power on in conjunction
when it determines it to be necessary. Even if the AV receiver
is connected to an RIHD compatible TV or player/recorder, it
will not power on if it is not necessary. It may not power on in
conjunction when the TV is set to output audio from the TV.
r Linked system functions with the AV receiver may not work
depending on the component model connected. In such cases,
operate the AV receiver directly.
r When the player/recorder cannot be operated with the remote
controller of the AV receiver, the corresponding component may
not be programmed to support the remote controller operation of
CEC. Program the remote control code of the component maker
to the remote controller for using.
About HDMI
HDMI (High Definition Multimedia Interface) is a digital
interface standard for connecting TVs, projectors, Bluray Disc/DVD players, set-top boxes, and other video
components. Until now, several separate video and audio
cables have been required to connect AV components. With
HDMI, a single cable can carry control signals, digital video,
and digital audio (2-channel PCM, multichannel digital
audio, and multichannel PCM).
The HDMI video stream (i.e., video signal) is compatible
with DVI (Digital Visual Interface) (¼1), so TVs and displays
with a DVI input can be connected by using an HDMI-toDVI adapter cable. (This may not work with some TVs and
displays, resulting in no picture.)
This unit supports HDCP (High-bandwidth Digital Content
Protection) (¼2), so it can display picture only on HDCPcompatible components.
The HDMI on this unit supports the following functions:
Audio Return Channel, 3D, x.v.Color, DeepColor, Lip Sync,
4K (Upscaling and Passthrough).
Supported Audio Formats of this Unit:
r 2-channel linear PCM (32 - 192 kHz, 16/20/24 bit)
r Multichannel linear PCM (up to 7.1 ch, 32 - 192 kHz,
16/20/24 bit)
r Bitstream (Dolby Atmos, Dolby Digital, Dolby Digital
Plus, Dolby TrueHD, DTS, DTS-HD High Resolution
Audio, DTS-HD Master Audio)
r DSD
Your Blu-ray Disc/DVD player must also support HDMI
output of the above audio formats.
57
Reference Information
About Copyright Protection:
The HDMI jack of this unit is compliant with Revisions 1.4
and 2.2 (HDMI OUT MAIN and HDMI IN3 jacks only) of
the HDCP (High-bandwidth Digital Content Protection)
specification (¼2), which is a copy-protection system for
digital video signals.
Other devices connected to this unit via HDMI must also be
compliant with HDCP.
¼1 DVI (Digital Visual Interface): The digital display interface standard set
by the DDWG (¼3) in 1999.
¼2 HDCP (High-bandwidth Digital Content Protection): The video
encryption technology developed by Intel for HDMI/DVI. It is designed
to protect video content and requires a HDCP-compatible HDMI/DVI
receiver to display the encrypted video.
¼3 DDWG (Digital Display Working Group): Lead by Intel, Compaq,
Fujitsu, Hewlett-Packard, IBM, NEC, and Silicon Image, this open
industry group’s objective is to address the industry’s requirements for
a digital connectivity specification for high-performance PC and digital
displays.
Note:
r Some contents are only available for devices compliant with
HDCP Rev. 2.2.
To view and listen to this kind of content, connect the TV or
player compliant with the HDCP Rev. 2.2 specification to the
HDMI OUT MAIN and HDMI IN3 jacks of this unit.
r The HDMI video stream (i.e., video signal) is compatible with
DVI (Digital Visual Interface), so TVs and displays with a DVI
input can be connected by using an HDMI-to-DVI adapter cable.
(Note that DVI connections only carry video, so you will need
to make a separate connection for audio.) However, reliable
operation with such an adapter is not guaranteed. In addition,
video signals from a PC are not supported.
r The HDMI audio signal (sampling rate, bit length, etc.) may be
restricted by the connected source component. If the picture
is poor or there is no sound from a component connected via
HDMI, check its setup. Refer to the connected component’s
instruction manual for details.
Supported Video Resolution of HDMI OUT MAIN/
SUB Jacks
See below the video signal types and resolutions that the
unit can output when it receives the input signals of the
following types and resolutions. The supported resolutions
are shown as "Input: Output".
(North American and Taiwanese models)
■ HDMI: HDMI
4K: 4K (¼1/¼2)
1080p/24: 4K, 1080p/24 (¼1), 2560 × 1080p
2560 × 1080p: 4K (¼3), 2560 × 1080p (¼1)
1680 × 720p: 4K (¼3), 1080p/24, 2560 × 1080p, 1680 ×
720p (¼1), 1080p
1080p: 4K (¼4), 2560 × 1080p, 1080p (¼1)
1080i: 4K (¼4), 2560 × 1080p, 1680 × 720p, 1080p,
1080i|(¼1), 720p
720p: 4K (¼4), 1080p/24, 2560 × 1080p, 1680 × 720p,
1080p, 1080i, 720p (¼1)
480p: 4K (¼4), 2560 × 1080p, 1680 × 720p,1080p, 1080i,
720p, 480p (¼1)
480i: 4K (¼4), 2560 × 1080p, 1680 × 720p, 1080p,1080i,
720p, 480p, 480i (¼1)
■ HDMI: Component
Can not be output.
■ HDMI: Composite
Can not be output.
■ Component: HDMI
480i: 4K (¼4), 2560 × 1080p, 1680 × 720p, 1080p,1080i,
720p, 480p, 480i (¼1)
■ Component: Component
1080i: 1080i
720p: 720p
480p: 480p
480i: 480i
■ Composite: HDMI
480i: 4K (¼4), 2560 × 1080p, 1680 × 720p, 1080p,1080i,
720p, 480p, 480i (¼1)
58
■ Composite: Composite
480i: 480i
¼1 Supported resolutions for HDMI OUT SUB.
¼2 Supported resolution: [3840 × 2160 24/30/60 Hz] [4096 × 2160
24/30/60 Hz]
¼3 Supported resolution: [3840 × 2160 24/30 Hz]
¼4 Supported resolution: [3840 × 2160 24/30 Hz] [4096 × 2160
24/30|Hz]
(European, Australian and Asian models)
■ HDMI: HDMI
4K: 4K (¼1/¼2)
1080p/24: 4K, 1080p/24 (¼1), 2560 × 1080p
2560 × 1080p: 4K (¼3), 2560 × 1080p (¼1)
1680 × 720p: 4K (¼3), 1080p/24, 2560 × 1080p, 1680 ×
720p (¼1), 1080p
1080p: 4K (¼4), 2560 × 1080p, 1080p (¼1)
1080i: 4K (¼4), 2560 × 1080p, 1680 × 720p, 1080p,
1080i|(¼1), 720p
720p: 4K (¼4), 1080p/24, 2560 × 1080p, 1680 ×720p,
1080p, 1080i, 720p (¼1)
480p/576p: 4K (¼4), 2560 × 1080p, 1680 × 720p,1080p,
1080i, 720p, 480p/576p (¼1)
480i/576i: 4K (¼4), 2560 × 1080p, 1680 × 720p,
1080p,1080i, 720p, 480p/576p, 480i/576i (¼1)
■ HDMI: Component
Can not be output.
■ HDMI: Composite
Can not be output.
■ Component: HDMI
480i/576i: 4K (¼4), 2560 × 1080p, 1680 × 720p,
1080p,1080i, 720p, 480p/576p, 480i/576i (¼1)
■ Component: Component
1080p: 1080p
1080i: 1080i
720p: 720p
480p/576p: 480p/576p
480i/576i: 480i/576i
■ Composite: HDMI
480i: 4K (¼4), 2560 × 1080p, 1680 × 720p, 1080p,1080i,
720p, 480p/576p, 480i/576i (¼1)
Reference Information
■ Composite: Composite
480i/576i: 480i/576i
¼1 Supported resolutions for HDMI OUT SUB.
¼2 Supported resolution: [3840 × 2160 24/25/30/50/60|Hz] [4096 × 2160
24/25/30/50/60|Hz]
¼3 Supported resolution: [3840 × 2160 24/25/30|Hz]
¼4 Supported resolution: [3840 × 2160 24/25/30|Hz] [4096 × 2160
24/25/30|Hz]
Home network (LAN)
The connection of several components via cables enabling
the mutual communication is called a network.
At households, many families create (generally, the term
"build" is used) a network to connect PC and gaming
machines to the Internet and to exchange data between
PC.
The network established in a relatively narrow area such as
one household is called a LAN (Local Area Network).
In this manual, a term "home network" (network for a
family) is used instead of "LAN," so this LAN becomes
more familiar.
By connecting this unit with the network server such as a
PC, playing music files in the network server (in the PC) is
possible. Moreover, by connecting to the Internet, listening
to the Internet radio is also possible.
This unit, PC, and Internet are not directly connected.
When connecting with a PC and/or Internet, several
components (network components) are necessary.
Components necessary for establishing a home
network (LAN):
Components necessary for the home network (LAN) for
using the NET function of this unit are as follows.
■ Router
A router is a device that controls information (data) flow
between the unit, PC, and the Internet.
As a network term, the flow of information (data) is called
"traffic". The router has a role to control the information flow
as the traffic control, between connected components.
r A router with a built-in 100Base-TX switch is
recommended.
In addition, if your router has the DHCP function,
facilitating the network setting becomes possible.
r Some routers have a built-in modem, and some Internet
Service Providers (ISP) require you to use specific
routers.
Please consult your ISP or PC dealer if you are unsure.
■ CAT5 Ethernet cable
The Ethernet cable is a cable that actually connects
components that comprise the network. There are straight
type and cross type Ethernet cables.
r Use a shielded CAT5 Ethernet cable (straight-type) to
connect the unit to your home network.
Consult your cable store for details of Ethernet cable.
■ Network server
(When PC etc./network server is used)
Component that stores music files and provides those files
at the time of playback.
r Requirements for use with this unit depend on the
component that is used as a network server.
r Conditions for pleasant playback of music files on
the unit depend on the using network server (PC
performance). See instruction manuals of using
components.
■ Modem (when Internet radio is used)
Device that connects home network (LAN) and Internet
There are many kinds of modems depending on the forms
of Internet connection.
In addition, when connecting to the Internet, it is required
to conclude an agreement with a company that provides
Internet connection service, called ISP (Internet Service
Provider).
Use a modem that is recommended by your ISP company
for the Internet connection.
There are some devices that have both router and modem
functions.
Within above network components, prepare a router,
Ethernet cable, and network server when the NET function
"network server" is used.
For enjoying the NET function "Internet radio," it is
necessary to use the router, Ethernet cable, and modem
(and agreement with ISP).
59
Reference Information
Server Requirements
USB Storage Device Requirements
Supported Audio Formats
■ Server playback
This unit can play digital music files stored on a PC or
media server and supports the following technologies:
r Windows Media® Player 11
r Windows Media® Player 12
r DLNA-certified media server
The network server must be connected to the same
network as this unit.
Up to 20,000 folders can be displayed, and folders may be
nested up to 16 levels deep.
r USB mass storage device class (but not always
guaranteed).
r FAT16 or FAT32 file system format.
r If the USB storage device has been partitioned, each
section will be treated as an independent device.
r Up to 20,000 folders can be displayed, and folders may
be nested up to 16 levels deep.
r USB hubs and USB storage devices with hub functions
are not supported. Do not connect these devices to the
unit.
Note: Depending on the media server, the unit may not recognize it,
or may not be able to play its music files.
Note:
r If the media you connect is not supported, the message "No
Storage" will be displayed.
r Sound files that are protected by copyright can not be played.
r When the USB audio player and this unit are connected, the
audio player screen and the screen of the unit may be different.
In addition, control functions of the audio player (classifying and
sorting music files and adding information, etc.) are not available
on this unit.
r Do not connect a PC to the USB port of the unit. Inputting sound
to the USB port of the unit from a PC is not possible.
r Media inserted to the USB card reader may not be available in
this function.
r Some USB storage devices and its contents may require some
time to be read.
r Depending on the USB storage device, proper reading of the
contents and proper supply of the power supply may not be
possible.
r Onkyo accepts no responsibility whatsoever for the loss or
damage to data stored on a USB storage device when that
device is used with this unit. We recommend that you back up
your important music files beforehand.
r Performance of the hard disk that receive power from the USB
port of the unit is not guaranteed.
r If you connect a USB hard disk drive to the USB port of the unit,
we recommend that you use its AC adapter to power it.
r When an audio player that are operated with batteries is used,
make sure that the batteries have enough remaining power.
r USB storage devices with security functions can not be played.
r For server playback and playback from a USB storage
device, this unit supports the following music file formats.
r Music files of the following formats that can be played
depend on the network server. For example, when using
Windows Media® Player 12, not all music files in the PC
can be played. The music files that can be played are the
ones registered to the Windows Media® Player 12 library.
r Variable bit-rate (VBR) files are supported. However,
playback times may not be displayed correctly.
r This unit supports the gapless playback of the USB
storage device in the following conditions.
When WAV, FLAC and Apple Lossless files are
continuously played back with the same format,
sampling frequency, channels and quantization bit rate.
r Remote playback does not support the gapless
playback.
r For playback via wireless LAN, the sampling rate of
88.2 kHz or higher, DSD and Dolby TrueHD are not
supported.
■ Remote playback
Remote playback is the function that enables this unit to
play music files saved in different components by operating
the DLNA-compliant controller component and PC in the
home network.
r Windows Media® Player 12
r DLNA-certified (within DLNA Interoperability Guidelines
version 1.5) media server or controller component.
½
The setting varies depending on the media server or controller
components. Refer to your components’ instruction manual for details.
If the operating system of your personal PC is Windows® 8/
Windows® 7, Windows Media® Player 12 is already
installed. For more information, see the Microsoft web site.
60
Note:
r With remote playback, this unit does not support the following
music file formats:
– FLAC, Ogg Vorbis, DSD and Dolby TrueHD.
■ MP3 (.mp3 or .MP3)
r Supported formats: MPEG-1/MPEG-2 Audio Layer 3
r Supported sampling rates: 8 kHz, 11.025 kHz, 12 kHz,
16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz
r Supported bitrates: Between 8 kbps and 320 kbps and
VBR. Incompatible files can not be played.
■ WMA (.wma or .WMA)
r WMA files must have the copyright option turned off.
r Supported sampling rates: 8 kHz, 11.025 kHz, 22.05
kHz, 32 kHz, 44.1 kHz, 48 kHz
r Supported bitrates: Between 5 kbps and 320 kbps and
VBR. Incompatible files can not be played.
r WMA Pro/Voice formats are not supported.
Reference Information
■ WMA Lossless (.wma or .WMA)
r Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,
96 kHz
r Quantization bit: 16 bit, 24 bit
■ WAV (.wav or .WAV)
WAV files contain uncompressed PCM digital audio.
r Supported sampling rates: 8 kHz, 11.025 kHz, 12 kHz,
16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz,
64 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz
r Quantization bit: 8 bit, 16 bit, 24 bit
½
For playback from a USB storage device, sampling rates of 176.4 kHz
and 192 kHz are not supported.
■ AAC (.aac/.m4a/.mp4/.3gp/.3g2/.AAC/.M4A/.MP4/.3GP
or .3G2)
r Supported formats: MPEG-2/MPEG-4 Audio
r Supported sampling rates: 8 kHz, 11.025 kHz, 12 kHz,
16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz,
64 kHz, 88.2 kHz, 96 kHz
r Supported bitrates: Between 8 kbps and 320 kbps.
Incompatible files can not be played.
■ FLAC (.flac or .FLAC)
FLAC is a file format for lossless audio data
compression.
r Supported sampling rates: 8 kHz, 11.025 kHz, 12 kHz,
16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz,
64 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz
r Quantization bit: 8 bit, 16 bit, 24 bit
½
For playback from a USB storage device, sampling rates of 176.4 kHz
and 192 kHz are not supported.
■ Ogg Vorbis (.ogg or .OGG)
r Supported sampling rates: 8 kHz, 11.025 kHz, 16 kHz,
22.05 kHz, 32 kHz, 44.1 kHz, 48 kHz
r Supported bitrates: Between 32 kbps and 500 kbps and
VBR.
r Incompatible files can not be played.
■ LPCM (Linear PCM)
r Supported sampling rates: 44.1 kHz, 48 kHz
r Quantization bit: 16 bit
½
Only for playback via DLNA.
■ Apple Lossless (.m4a/.mp4/.M4A/.MP4)
r Supported sampling rates: 8 kHz, 11.025 kHz, 12 kHz,
16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz,
64 kHz, 88.2 kHz, 96 kHz
r Quantization bit: 16 bit, 24 bit
■ DSD (.dsf or .DSF)
r Supported sampling rates: 2.8224 MHz, 5.6448 MHz
½
For playback from a USB storage device, sampling rates of 5.6448 MHz
is not supported.
■ Dolby TrueHD (.vr/.mlp/.VR/.MLP)
r Supported sampling rates: 48 kHz, 64 kHz, 88.2 kHz, 96
kHz, 176.4 kHz, 192 kHz
½
For playback from a USB storage device, only sampling rates of 48|kHz
is supported.
½ Playback via DLNA is not supported.
Radio Wave Caution
The AV receiver uses a 2.4 GHz radio wave
frequency, which is a band used by other wireless
systems as 1 and 2 described below.
1. Devices which use a 2.4 GHz radio wave frequency
r Cordless phones
r Cordless facsimiles
r Microwave ovens
r Wireless LAN devices (IEEE802.11b/g/n)
r Wireless AV equipment
r Wireless controllers for game systems
r Microwave oven-based health aids
r Video transmitter
r Specific type of external monitor and LCD display
2. Less common devices which use a 2.4 GHz radio wave
frequency
r Anti-theft systems
r Amateur radio stations (HAM)
r Warehouse logistic management systems
r Discrimination systems for train or emergency
vehicles
If these devices and the AV receiver are used at the same
time, the audio may be undesirably stopped or disturbed
due to a radio wave interference.
Suggestions for improvement
r Switch off the devices which emit the radio wave.
r Place the interfering devices away from the AV
receiver.
r The AV receiver uses radio wave, and a third person can
receive the wave on purpose or accidentally. Do not use
the communication for important or fatal matters.
r We assume no responsibility whatsoever for any error
or damage of network environment or access device
resulting from the use of this apparatus.
Confirm with the provider or access device maker for
more information.
Scope of Operation
Use of the AV receiver is limited to home use.
(Transmission distances may be reduced depending on
communication environment.)
In the following locations, poor condition or inability to
receive radio waves may cause the audio to be interrupted
or stopped:
r In reinforced concrete buildings or steel framed or iron
framed buildings.
r Near large metallic furniture.
r In a crowd of people or near a building or obstacle.
r In a location exposed to the magnetic field, static
electricity or radio wave interference from radio
communication equipment using the same frequency
band (2.4 GHz) as the AV receiver, such as a 2.4 GHz
wireless LAN device (IEEE802.11b/g/n) or microwave
oven.
r If you live in a heavily populated residential area
(apartment, townhouse, etc.) and if your neighbor’s
microwave oven is placed near your AV receiver, you
may experience radio wave interference. If this occurs,
move your AV receiver to a different place.
When the microwave oven is not in use, there will be no
radio wave interference.
Radio Wave Reflections
The radio waves received by the AV receiver include the
radio wave coming directly from the devices and waves
coming from various directions due to reflections by walls,
furniture and building (reflected waves). The reflected
waves (due to obstacles and reflecting objects) further
produce a variety of reflected waves as well as variation
in reception condition depending on locations. If the audio
cannot be received properly due to this phenomenon, try
moving the location of the wireless LAN device a little.
61
Reference Information
Also note that audio may be interrupted due to the reflected
waves when a person crosses or approaches the space
between the AV receiver and the wireless LAN device.
r We assume no responsibility whatsoever for any
damages resulting from the use of this apparatus except
in the cases deemed acceptable under the applicable
laws and regulations.
r Operation in all environment is not guaranteed for
wireless LAN. The communication may not be possible
or have desirable communication speed.
Precautions
r Do not use this apparatus near an electronic device
handling high-accuracy controls or weak signals. Doing
so may cause an accident due to a malfunction of the
device.
r Do not use this apparatus in use prohibited location
such as an aircraft equipment or a hospital. Doing so
may cause an accident due to a malfunction of an
electronic device or an electro-medical apparatus.
Follow the instructions of the medical facilities.
■ Electronic device which requires cautions
Hearing aid, pace maker, other medical electronic devices,
fire alarm, automatic door, and other automatic control
device.
When using a pace maker or other medical electronic
devices, confirm with the medical electronic device maker
or dealer for the effect of the radio wave.
62
Reference Information
Remote Control Code List
„
Television (A to E)
A.R. Systems
Accent
Acoustic Solutions
Action
Addison
AEG
Aiko
Aim
Akai
Akiba
Akito
Akura
Alba
Alien
Allstar
Amstrad
Anam
Andersson
Anitech
Ansonic
AOC
Apex Digital
Ardem
Arena
Ario
Aristona
ART
Art Mito
10037, 10556
10037
11667, 11585,
11037
10650
10653, 11150
11037
10037
10037
10037, 12676,
10208, 10714,
10556, 12414,
13183, 10178
10037
10037
10037, 10714,
11667, 11585,
10171, 11037
11037, 12676,
10037, 10714,
11585
11037
10037
10037, 10171,
11037
10037, 10650
11585, 12676
10037
10037
11365, 12769,
10178, 10625,
11150
12397
10714, 10037
10037
12397
10556, 10037
11037
11585
Asberg
Astra
ATD
Atlantic
Audiosonic
Audioworld
Autovox
Aventura
Axxon
Baird
Barco
Base
Basic Line
Baur
Beaumark
Beijing
Beko
Bell & Howell
Belson
Belstar
Beon
Berthen
Bestar
Bexa
BGH
Black Diamond
Blaupunkt
Blue Sky
BPL
Brandt
Brinkmann
Brionvega
Britania
Bush
10037
10037
10698
10037
10714, 10037
10698
12676
10171
10714
10208
10556
10698
10037, 11037,
10556
10037, 10195
10178
10208
10714, 10037
10017
10698
11037
10037
10556
10037
12493
12414
11037
10195
10714, 10037,
11037, 10556,
10625
10208, 10037
10625, 11585,
10714
10037
10037
12414
11037, 10037,
10714, 12676,
11667, 10208,
10556, 10698,
11585
Byd:sign
Camper
Carad
Carena
Carrefour
Cascade
Casio
Cathay
CCE
Celcus
Celebrity
Centrum
Centurion
Changhong
Chimei
Chun Yun
Chung Hsin
Clarivox
Clatronic
Clayton
Coby
Commercial Solutions
Condor
Conrowa
Contec
Cosmel
CPTEC
Crown
Crypton
Curtis
Cyberpix
D-Vision
Daewoo
Dansai
Dantax
Datsura
Dawa
12209
10037
11037
10037
10037
10037
10037
10037
13782, 10037
12676, 11585
10000
11037
10037
13434, 12769,
10508
12769
10000, 11150
11150
10037
10037, 10714
11037
13478
11447
10037
10698
10037
10037
10625
10037, 10714,
10208, 11037
11667
12397
11667
10037, 10556
10037, 10556,
10178, 11150
10037, 10208
11037, 10714,
12676
10208
10037
Daytron
De Graaf
Decca
Denver
Desmet
Diamant
Diamond
Digatron
Digihome
Digiline
Digisonic
Digitor
Dixi
Drean
DSE
Dual
Dumont
Durabrand
Dux
DX Antenna
Dynatron
Dynex
E.S.C.
ECE
Elbe
Electroband
Electrograph
Elektra
Elfunk
ELG
Elin
Elite
Emerson
Envision
Epson
Erres
10037
10208
10037
10037
10037
10037
10698
10037
11667, 12676
10037
11826
10698, 10037
10037
10037
10698
11667, 10037,
11037, 11585,
12676, 10714
10017
10171, 10178,
10714, 11037
10037
13817
10037
12049
10037
10037
10037, 10556
10000
11755
10017
11037
10037
10037
10037
11864, 10171,
11394, 10178,
10037, 10714
11365, 11506
11379
10037
63
Reference Information
ESA
Euroman
Europa
Europhon
Evesham Technology
Excello
Exquisit
10171
10037
10037
10037
11667
11037
10037
Genesis
Genexxa
GFM
Gibralter
Gibson
Gintai
Godrej
GoGen
GoldStar
12676
11585
10625, 11037,
10037, 10195,
11585, 12676
10037, 10171
10208
11667, 10714,
12676, 10037,
10556
10714, 10037,
11037, 10208,
10556
10208
10037
10037
10037
11636
10037
11826
10809
10809
13817, 10171,
11394, 11037,
10714
11037
10037
10037
11755
11447, 10178,
10625, 11454
10037
Goodmans
„
Television (F to J)
F&U
FairTec
Ferguson
Fidelity
Finlandia
Finlux
Firstline
Fisher
Flint
Formenti
Fraba
Freesat
Friac
Frigidaire
Fujitsu
Fujitsu Siemens
Funai
Gaba
Galaxi
Galaxis
Gateway
GE
GEC
64
Gorenje
Gradiente
Graetz
Granada
Grandin
Grundig
H-Buster
Haier
Hallmark
Hankook
Hannspree
Hanseatic
Hantarex
Hantor
Harwood
Hauppauge
HB
HCM
Heran
Herosonic
Highline
Hinari
HiPlus
10037
10037
10171, 11864
10017
11826
11150
11585
12676
10178, 10037,
10714, 11150
10037, 11037,
11667, 10714,
11585, 10556,
10625, 12676
11585, 12676
10037
10714
10208, 10037
10037, 10714,
11037, 10556
10195, 11223,
10556, 10037,
11667, 12676
13620
13620, 10698,
10037, 10508
10178
10178
11826
10037, 10714,
10625, 10556
10037
10037
10037
10037
10714
10037
11826
11826
10037
10037, 10208
11826
Hisawa
Hisense
Hitachi
Hitachi Fujian
Hitec
Hoher
Hornyphon
Hua Tun
Hypson
Hyundai
Iberia
ICE
iLo
Imperial
Indiana
Inno Hit
Innova
Insignia
Integra
Inteq
Interbuy
Interfunk
Internal
Intervision
Irradio
IRT
Isis
Isukai
ITS
ITT
ITT Nokia
ITV
10714
10556, 10508,
10208
11643, 12676,
11576, 11585,
11691, 11037,
11667, 10037,
10150, 10178,
10508, 11150,
12170
10150
10698
10714
10037
11150
10037, 10714,
10556, 11037
10698, 12676,
11037
10037
10037
11394
10037
10037
11037, 11585
10037
12049, 10171
11807, 13100,
13500
10017
10037
10037
10556
10037
10037
10698
12676
10037
10037
12676, 10208
10208
10037
JCB
Jinfeng
Jinxing
JMB
Jubilee
JVC
10000
10208
10037, 10556,
10698
12676, 10556
10556
11774, 10653,
11601, 12271,
11428, 10508,
10650, 12676
„
Television (K to N)
Kaisui
Karcher
Kathrein
Kendo
Kennex
Kioto
Kiton
KLL
Kneissel
Kolin
Kolster
Konka
Konnig
Korpel
Kosmos
Kunlun
Kupperbusch
L&S Electronic
Lavis
Lecson
Lenco
Leyco
10037
10714
10556
11037, 11585,
12676, 10037
11037
10556
10037
10037
10037, 10556
10150, 10037,
11150, 11755
10037
10037, 10714
10037
10037
10037
10208
12676
10714
11037
10037
10037, 11037
10037
Reference Information
LG
LiesenKotter
Lifetec
Linetech
Linsar
Local India Brand
Local Malaysia Brand
Lodos
Loewe
Logik
Luma
Lumatron
Lumenio
Lux May
Luxor
LXI
Madison
Magnavox
Magnum
Manesth
Manhattan
Marantz
Mark
Mastro
Masuda
Matsui
Matsushita
11840, 11860,
11423, 12731,
12182, 12358,
12362, 10178,
12424, 10037,
10714, 10017,
10556, 10698
10037
10037, 11037,
10714
12676
12676, 11667,
11585
10208
10698
11037
10633
11037, 10698,
11585
11037
10037
10037
10037
11037, 12676,
10208
10178
10037
12372, 11454,
11506, 10171,
11365, 11755,
11867
10714, 10037
10037
10037, 11037
10037, 10556
10037, 10714
10698
10037
10037, 10195,
10208, 11037,
10714, 10556,
11667, 12676
10650
Maxent
Maxess
Meck
Mediator
Medion
Megatron
MEI
Melectronic
Memorex
Mercury
Mermaid
Metronic
Metz
MGA
Micromaxx
Midland
Mikomi
Minato
Minerva
Ministry Of Sound
Minoka
Mitsubishi
Moree
Morgan's
Moserbaer
MTlogic
Mudan
Multitec
Multitech
Myryad
NAD
Naiko
11755
12493
10698
10037, 10556
10714, 10037,
11037, 12676,
11667, 10556,
10698, 11585
10178
11037
10037, 10195,
10714
10178, 10150,
11037
10037
10037
10625
11037, 10195
10150, 10178
10037, 10714,
11037
10017
11585, 11667
10037
10195
11667
10037
10150, 11250,
12313, 10178,
10037, 10556,
11150, 11037,
11171
10037
10037
11585
10714
10208
11037, 10037
10037
10556
10037, 10178
10037
Nakimura
National
NEC
Neckermann
NEI
Neoka
Netsat
NetTV
Neufunk
Nevir
New Sonic
New Tech
Newave
Nikkai
Nikkei
Nikko
Nokia
Norcent
Nordmende
Normerel
Novatronic
Novita
NPG
10037
10208, 10508
12461, 10178,
10508, 10653,
11150
10037, 10556
10037, 11037
11826
10037
11755
10556, 10714,
10037
12676
11826
10037, 10556
10178, 11150
10037
10714
10178
10208
11365
10195, 11585,
10037, 10714,
11667
10037
10037
11585
13434
„
Television (O to S)
Oceanic
OK Line
OK.
Okano
OKI
Omni
Onei
Onida
Onimax
Onix
10208
11037
13434, 12676
10037
11667, 12676,
13434, 11585
10698
11667
10653, 12414
10714
10698
Onkyo
Onn
Opera
Optimus
Orava
Orbit
Orion
Orline
Ormond
Osaki
Osio
Osume
Otto Versand
PaciƂc
Palladium
Palsonic
Panama
Panasonic
Panavideo
Panavision
Panda
Penney
Perdio
Perfekt
Philco
11807, 13100,
13500
11667
10037, 10714
10650
11037
10037
10037, 10556,
10714, 11037,
12676
10037
11037
10037, 10556
10037
10037
10037, 10556,
10195
10714, 11037,
10556
10037, 10714,
10556
12461, 10698,
10037
10037
11636, 11291,
11480, 11650,
10650, 13825,
12170, 10037,
10208, 10508
13825
10037
10208, 10508,
10698
10178
10037
10037
13426, 12414,
10037, 10178
65
Reference Information
Philips
Phocus
Phoenix
Phonola
Pioneer
PJ
Plantron
Playsonic
Polaroid
Powerpoint
Prima
Prinston
Pro Vision
ProƂtronic
Proline
Proscan
Prosonic
Protech
Proton
Pulsar
Pye
Qingdao
Quadro
Quasar
Quelle
R-Line
Radiola
Radiomarelli
66
10037, 12800,
10556, 11887,
11867, 11506,
12372, 12680,
11454, 10171,
11365, 10017,
10000, 10178,
11394
10714
10037
10037, 10556
11457, 10037,
10698, 11636,
12171
11506
10037
10714, 10037
12676, 11826
10037, 10698
12461
11037
10037, 10556,
10714
10037
10625, 10037,
11037, 12676
11447
10714, 12676,
10037, 11585,
11667
10037, 11037
10178
10017
10037, 10556
10208
11667
11291, 10650
10037, 11037,
10195
10037
10037, 10556
10037
RadioShack
Radiotone
RCA
Realistic
Recor
Rectiligne
Red Star
Reƃex
Relisys
Relon
Remotec
Reoc
Revox
RFT
Roadstar
Rowa
Runco
Saba
Sagem
Saivod
Salora
Sampo
Samsung
Sansui
Sanyo
SBR
10037, 10178
10037, 11037
11447, 12746,
10625, 12434,
12932, 12187,
10000, 10178,
10618, 11454,
13426
10178
10037
10037
10037
10037, 11037
11585
11826
10037, 10171
10714
10037
10037
11037, 10037,
10714
10698, 10037
10017
10625, 10714,
12676
10618
11037, 10037
10208
11755, 10171,
10178, 10650
12051, 11632,
10618, 10037,
10556, 10178,
10208, 11150
10037, 10714
10208, 11142,
11585, 12676,
12461, 11974,
12769, 10508,
11037, 11150,
11365, 11667
10037, 10556
Schaub Lorenz
Schneider
Schontech
Scotch
Scott
Sears
Seelver
SEG
SEI
Sei-Sinudyne
Semp Toshiba
Sencor
Senzu
Serie Dorada
Shanghai
Sharp
Sheng Chia
Shintoshi
Shivaki
Siam
Siemens
Siera
Silva
Silva Schneider
SilverCrest
Sinudyne
SKY
Skyworth
Solavox
Soniko
Soniq
Sonitron
Sonneclair
Sonoko
10714, 12676,
11667
10037, 10556,
10714, 11037,
11585, 12676
11037
10178
10178
10171, 10178
11037
11037, 10037,
13434
10037
10037
13793
10714
12493
10178
10208
11659, 12360,
10818, 11393,
12676, 10650,
11165, 11423
11150
10037
10178, 10037
10037
10195, 10037
10556, 10037
10037
10037
12676, 11037
10037
10037
12769, 10037,
10698
10037
10037
12493
10208
10037
10037
Sonolor
Sontec
Sony
Soundesign
Soundwave
Sowa
Soyea
Soyo
Squareview
SR Standard
Starlite
STI
Strato
Sunny
Sunstar
Sunstech
Sunwood
Supersonic
SuperTech
Supra
Supreme
Svasa
Sylvania
Symphonic
Synco
Sysline
10208
10037
12778, 11825,
10810, 10000,
11651, 11505,
11167
10178
10037, 11037
10178, 11150
10698
11826
10171
10037, 11037
10037
13793
10037
10037
10037
12676
10037
10208
10037, 10556
10178
10000
10208
10171, 11864,
11394
10171, 11394
11755, 10000,
10178, 11826
10037
Reference Information
„
Television (T to Z)
Tacico
Tai Yi
Talent
Tashiko
Tatung
TCL
TCM
Teac
Tec
Tech Line
Technica
Technics
Technika
TechniSat
Technisson
Techno
Technosonic
Techwood
Tecnimagen
Teco
Tedelex
Teknika
TELE System
Telecor
Telefunken
Telefusion
Telegazi
Telemeister
Telesonic
Telestar
Teletech
Teleview
10178, 11150
11150
10178
10650, 11150
10037, 11150
12434, 13183,
13426, 12414,
10698
10714
10037, 11037,
10698, 10714,
11755, 10171,
10178
10037
10037, 11585
11037
10556, 10650
11667, 12676
10556
10714
11585
10556, 10625
11667, 11037,
12676
10556
10178, 10653
10208
10150
11585
10037
10625, 12676,
12414, 10698,
11585, 10037,
10714, 11667
10037
10037
10037
10037
10037, 10556
10037, 11037
10037
Tennessee
Tensai
Terris
Tesla
Tevion
Thomson
Thorn
TMK
TNCi
Tokai
Tokaido
Topline
Toshiba
TRANS-continents
Transonic
Triad
Triumph
TVTEXT 95
Uher
Ultravox
Unic Line
Uniden
United
Universal
Universum
Univox
V7 Videoseven
Vestel
10037
10037, 11037
11667
11037, 10037,
10556, 10714
10714, 11037,
10037, 10556,
11585, 11667
10625, 11447,
10037
10037
10178
10017
10037, 11037
11037
11037
11508, 11524,
11656, 12676,
10508, 13570,
10650, 11037,
10195, 10618,
11150, 11169
10037, 10556,
11037
10037, 10698
10556
10037, 10556
10556
10037
10037
10037
12122, 12676,
11667
10714, 11037,
10037, 10556
10037, 10714
10037, 11037,
10195, 10618
10037
11755
11037, 10037,
11585, 11667
Vexa
Victor
Videocon
VideoSystem
Vidtech
Viewsonic
Vision
VIZIO
Vortec
Voxson
VU
Walker
Waltham
Wards
Watson
Wega
Welltech
Weltstar
Westinghouse
Westwood
Wharfedale
White Westinghouse
Wilson
Windsor
Windy Sam
Wintel
Wyse
Xiahua
Xiron
XLogic
Xoceco
Xrypton
Yamaha
10037
11428, 10650,
10653
10508, 10037
10037
10178
11755, 12049,
11365
11826, 10037
11758, 13758,
12209
10037
10037, 10178,
11667
11365
12676, 11667,
11585
10037, 11037
10017, 10000,
10178
11037, 10037,
10714
10037
10714
11037
11712, 11826,
11755, 12397
11585
11667, 10037,
10556
10037
10556
11037
10556
10714
11365
10698
11037
10698
10037, 12461
10037
11576, 10650
Yamishi
Yokan
Yoko
YU-MA-TU
Zenith
Zepto
Zonda
10037
10037
10037
10037
10017, 10178,
11423, 12731,
11365, 12358,
12362
11585
10698
„
TV DVD Combination
Akai
Alba
Black Diamond
Blue Sky
Bush
Centrum
Crown
Dual
Dynex
Elfunk
Emerson
Ferguson
Funai
Goodmans
Grandin
Grundig
Hitachi
Insignia
JVC
LG
Linsar
Logik
Luxor
Magnavox
12676, 32966
12676, 32966
11037, 30713
11037, 30713
12676, 10698,
11037, 30713,
32966
11037, 30713
11037, 30713
11037, 30713
12049
11037, 30713
11864, 11394,
30675
11037, 30713
11394, 30675
11037, 12676,
30713, 32966
30713
30539
12676, 11037,
30713, 32966
12049
12271, 11774
11423
12676, 32966
11037, 30713
11037, 30713
12372
67
Reference Information
Matsui
Medion
Mitsubishi
OK.
OKI
Orava
Panasonic
Philips
Polaroid
Powerpoint
Prosonic
RCA
Samsung
Sanyo
SEG
Sharp
Soniq
Sony
Sylvania
Teac
Technica
Telefunken
Teletech
Thomson
Toshiba
United
Universum
Vestel
Viewsonic
Weltstar
Westinghouse
Xiron
68
11037, 12676,
30713
12676, 32966
34004
13434
12676, 32966
11037, 30713
12170
10556, 11454,
11394, 12372,
30539
12676, 32966
10698
12676, 32966
12187, 12746,
12932, 11447
12051
12676
11037, 30713
10818, 12360,
12676, 32966
12493
12778
11864, 11394,
10171, 30675,
30630
10698
11037, 30713
10698
11037, 30713
10625, 30551
11524, 12676,
32966
11037, 30713
30713
11037
12049
11037, 30713
11712
11037, 30713
„
DVD
3D LAB
Accurian
Acoustic Solutions
AEG
Aiwa
Akai
Akura
Alba
Amitech
Amstrad
AMW
Ansonic
Aristona
ASDA
Audix
Autovox
Awa
Axion
Basic Line
Bel Canto Design
Belson
Best Buy
Black Diamond
Blu:sens
Blue Parade
Blue Sky
Brainwave
Brandt
Bush
Byd:sign
CCE
Celcus
Centrum
Changhong
Cinea
30539
30675
30730, 30713
30675, 30770,
31233
30533
32966, 31233,
30675, 30770
31233
32966, 30713,
30730, 30539
30770
30713, 30770,
32139
30872
30831
30539, 30646
32213
30713
30713
30730, 30872
30730
30713
31571
32139
32139
30713
31233
30571
30713
30770
30551, 30503
30713, 30730,
30831, 32966
30872
30730
32966
30713, 30675
30627
30831
Cineral
Cinetec
Classic
Clatronic
Clayton
Coby
Codex
Continental Edison
Craig
Crown
Cybercom
Daenyx
Daewoo
Dansai
Dantax
Datsun
Daytek
Dayton Audio
DCE
Decca
Denon
Dewo
Digihome
DigiLogic
DiK
Disney
DK Digital
Dragon
DSE
Dual
Durabrand
Dynex
E:max
ECC
Elfunk
Elin
30730
30713, 30872
30730
30675, 31233
30713
30730
31233
30831, 30872
30831
30713, 30770
30831
30872
30770, 30872
30770
30713, 30539,
32966
31233
30872
30872
30831
30770
31634, 32258,
32748, 30490,
33851
31634
30713, 32966
30713
30831
30675, 30831
30831
30831
30675
30831, 30713,
30730, 32966
30675, 30713,
30831
32596
30770, 31233
30730
30713
30770
Elite
Elta
Eltax
Emerson
EuroLine
Ferguson
Finlux
Firstline
Funai
G-Hanz
G-HanzS
GE
GFM
Go Video
GoldStar
Goodmans
GPX
Gran Prix
Grandin
Grundig
Grunkel
GVG
H&B
Hanseatic
Harman/Kardon
HE
Hello Kitty
Henss
Hitachi
Hoher
Home Electronics
Humax
HYD
Hyundai
Inno Hit
Insignia
32854
30770, 31233
31233
30675, 32213
30675, 31233
30713, 32966
32966, 30770,
30741
30713
30675
32213
32213
30522
30675
31044, 30741
30741
30713, 30730,
32966
30741
30831
30713, 31233
30539, 30551,
30713, 32966
30770, 30831
30770
30713, 31233
30741
30582
30730
30831
30713
32966, 30573,
30713, 31664
30713, 30831
30730, 30770
30646
31233
32966
30713
32596, 30675,
30741
Reference Information
Integra
Irradio
ITT
JDB
JMB
JVC
Kansas Technologies
Kendo
Kennex
Kenwood
Kiiro
Kupperbusch
Leiker
Lenco
Lexicon
LG
Lifetec
Linetech
Linsar
Lodos
Loewe
Logik
Lumatron
Lunatron
Luxman
Luxor
Magnavox
Manhattan
Marantz
Mark
Marquant
Matsui
Maxim
32147, 30627,
31769, 30503,
31612, 30571,
31634
31233, 30646
31233
30730
32966
30623, 31602,
30503, 30539,
32966
31233
30713, 30831
30713, 30770
30490
30770
32966
30872
30713, 30770
32545
30741, 31602,
31233
30831
32966
32966
30713
30741, 30539
30713
30713, 30741
30741
30573
30713, 32966
30675, 30503,
30646, 30539,
31354, 30713
30713
30539, 32414,
33444
30713
30770
30713, 32966
30713, 30872
MBO
MDS
Mecotek
Medion
Memorex
Metz
Micromedia
Micromega
Microsoft
Microstar
Minax
Minoka
Mitsubishi
Mizuda
Mustek
Mystral
NAD
Naiko
NEC
Nevir
Nisato
Noblex
Norcent
Nordmende
OK.
OKI
Onkyo
Oppo
Orava
Orbit
Orion
Ormond
PaciƂc
Packard Bell
Palladium
30730
30713
30770
30831, 32966,
30741, 30630
30831, 32213
30713, 30571
30503, 30539
30539
31708, 32083,
30522
30831
30713
30770
34004, 30713
30770
30730
30831
30741
30770
30741, 31602
30831, 30770
31233
31233
30872
30831
32966
32966
30627, 32147,
31612, 31769,
30503, 30571,
31634
32545, 30575
30713
30872
30713, 31233
30713
30831, 30713
30831
30713
Panasonic
Philco
Philips
Pioneer
Polaroid
Polk Audio
Portland
Powerpoint
Presidian
Prinz
Prism
Pro Vision
Proline
Proscan
Proson
Prosonic
Pye
Radionette
Radiotone
RCA
REC
Red
Red Star
Richmond
Roadstar
Ronin
Rotel
Rowa
Saba
Saivod
Salora
30490, 31579,
31641, 32710,
33641, 33862,
32523
30675
32056, 30539,
31354, 32789,
32434, 30646,
31340, 30503,
30675, 32084
31571, 30631,
30571, 32442,
32854, 30142
32966
30539
30770
30872
30675
30831
30831
30730
32966
30522
30713
32966
30539, 30646
30741
30713
30522, 32213,
30571, 31769
30490
32213
30770
31233
30713, 30730
30872
30623
30872
30551
30831
30741
Samsung
Sanyo
ScanMagic
Schaub Lorenz
Schneider
Schontech
Scott
SEG
Semp
Semp Toshiba
Sharp
Sherwood
Shinsonic
Sigmatek
Silva Schneider
Skantic
Skymaster
SM Electronic
Smart
Sonashi
Soniq
Sony
Sound Color
Soundwave
Spectra
SR Standard
Strong
Sunkai
Sunstech
30199, 30573,
33195, 31635,
32369, 32489,
32329, 30490,
31044
32966, 30713,
31233
30730
30770
30539, 30831,
30646, 30713
30713
31233
30713, 30872
30503
30503
30630, 32250,
30713, 32966,
30675
30741, 30770
30533
32139
30831, 30741
30713, 30539
30730
30730
30713
30831
30831
31633, 31516,
30533, 31033,
31070, 30864,
32861, 31536,
32180
31233
30713
30872
30831
30713
30770
30831, 32139,
32966
69
Reference Information
Supratech
Sylvania
Symphonic
Sytech
Tandberg
Targa
Tascam
Tatung
TBoston
Tchibo
TCM
Teac
Technica
Technics
Technika
Technosonic
Techwood
Telefunken
Teletech
Tensai
Theta Digital
Thomson
Tokai
Toshiba
TRANS-continents
Transonic
Trevi
TVE
United
Universum
Urban Concepts
Venturer
Vestel
VIZIO
70
32139
30675, 30630
30675
30831
30713
30741
31818
30770
32139
30741
30741
30571, 30675,
30741, 31818,
32139, 34004
30713
30490
30770, 30831
30730
30713, 32966
30551, 32966
30713
30770
30571
30551, 30522,
30831
31233
30503, 32705,
32277, 31769,
33157, 32966,
32551
30831, 30872,
31233
30730
30831
30713
30713, 30675,
30730, 31233
30713, 30741
30503
31769
30713
32563
Voxson
Waitec
Walker
Waltham
Welkin
Wellington
Weltstar
Wharfedale
Wilson
Windsor
Windy Sam
Woxter
X-View
Xbox
Xiron
XMS
Yamada
Yamaha
Yamakawa
Yukai
Zenith
30831, 30730
30730, 31233
32966
30713
30831
30713
30713
30713
31233, 30831
30713
30573
32139
31233
31708, 32083,
30522
30713
30770
30872, 32139
30539, 30817,
30490, 32298,
31354, 30646
30872
30730
30741, 30503
„
Blu-ray Disc
Denon
Elite
Funai
Insignia
Integra
Lexicon
LG
Magnavox
Marantz
Mitsubishi
32258, 32748,
33851
32854
30675
32596, 30675
32147, 32900,
32910, 33100,
33101, 33500,
33501
32545
31602, 30741
30675
32414, 33444
34004
Onkyo
Oppo
Panasonic
Philips
Pioneer
Samsung
Sharp
Sony
Sylvania
Tascam
Toshiba
VIZIO
Yamaha
32147, 32900,
33101, 33501,
32910, 33100,
33500
32545
31641, 33641,
33862, 32523,
32710
32789, 32434,
32084
32442, 32854,
30142
30199, 33195
32250
31516, 32180
30675
31818, 34004
32705, 33157,
32551
32563
32298
„
DVD-R
Accurian
Aristona
Denon
Emerson
Funai
Go Video
GPX
Hitachi
Humax
Irradio
LG
Loewe
Magnavox
Medion
Panasonic
Philips
Pioneer
30675
30646
30490
30675
30675
30741
30741
31664
30646
30646
30741
30741
30675, 30646
30741
30490, 31579,
32710, 32523
30646, 31340
30631
Pye
RCA
Samsung
Schneider
Sharp
Sony
Sylvania
Targa
Thomson
Toshiba
Yamaha
Zenith
30646
30522
31635, 30490,
32489
30646
30630, 30675
32861, 31070,
31516, 31033,
31536, 32180,
31633
30675
30741
30551
32277, 32551
30646
30741
„
VCR
DirecTV
Humax
Panasonic
Philips
RCN
ReplayTV
Sonic Blue
Sony
TiVo
20739
20739
20616
20739
20739
20616
20616
20636
20739, 20636
„
Cable Set Top Box (A to E)
3 Rivers Telephone
Cooperative
Accelplus
Access Cable
Television
Access
Communications
Ace Communications
ACTV Cablevision
Adams Cable TV
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877
02586
01376, 01877,
01982
01376
Reference Information
ADB
Advanced Broadband
Advanced Telemedia
Airwave Networks
Akado
Alabama Broadband
Alcom
Algona Municipal
Utilities
All West
Communications
Alleghany Cablevision
Allegiance
Communications
Alliance
Communications
Allied Telesis
Almega Cable
Alpine Cable
Alta Utilities
Alternative Cable
Altibox
Altitude
Communications
Americable
International
American Broadband
02586, 01920,
01481, 01998,
02437, 03028
01376, 01877,
01982
01376, 01877,
01982
01376, 01982
02043
01376
02437
01376, 01877,
01982
01376
01376, 01877,
01982
01376
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01877
01376, 01877,
01982
02437
01376
Amino
Anne Arundel
Broadband
Antietam Cable
Arc One
Arctic Cooperatives
Argent
Communications
Arialink Broadband
Arkwest
Arledge Electronics
Armstrong
Arris
Arvig Communication
Systems
Ashland Home Net
Askivision Systems
Astound Broadband
AT&T
ATC Communications
Atlantic Broadband
ATMC
Atwood Cable
01877
01376, 01877,
01982
American
01376, 01877,
Entertainment Network 01982
American Telecasting
01376, 01877,
01982
Amherst Telephone
01376, 01877,
01982
Aurora Cable TV
Ayrshire
Communications
B & C Cablevision
B & L Technologies
Bailey Cable TV
01615, 01481,
01898, 01998,
03028
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01481, 01998,
03028
01376
01376, 01877
02187
01376, 01982,
01998, 02345
01376, 01877,
01982
01376, 01877,
01982
01376, 01877
00858
01376
01877, 01376
01376, 01982,
01998, 03028
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
Baja Broadband
Baldwin County
Internet
Baldwin Telecom
Ballard Rural
Telephone Cooperative
Barbourville Utility
Commission
Bardstown Cable
Bascom
Communications
Base Cablevision
Bay Cablevision
Bay City Cablevision
Bay Country
Communications
Bay Creek
Communications
Bayland
Communications
Bayou Cable
Beamspeed
Beaver Creek
Telephone
Beaver Valley Cable
Beck's Cable Systems
Bee Line Cable
Beeline
BELD Broadband
Belgacom TV
Belhaven Cable TV
Bell
Bell Aliant
Bell Fibe TV
01376
01376, 01877,
01982
01877
02586
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
02586
01376, 01877,
01982
01376, 01877,
01982
01877, 01982
01376, 01877,
01982
01376, 01877,
01982
01376
03028
01376, 01877,
01982
02132
01376, 01877,
01982
01998
01998
01998
Bellaire Cable
Bellevue Cable
Bend Broadband
Bentleyville Cable
Benton Cooperative
Telephone
Beresford Cablevision
Berkshire Cable Corp
Beulah Cable TV
Bevcomm
Beyond
Communications
Big Sandy Broadband
Biltmore
Communications
Blakely Cable
Television
Bledsoe Telephone
Cooperative
Bloomingdale
Communications
Blue Mountain TV
Cable
Blue Ridge
Communications
Blue Sky Cable
Blue Valley
Telecommunications
Bobcaygeon Cable
01376, 01877,
01982
01376, 01877,
01982
01376, 02187
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01615, 01898
01376, 01877,
01982
01376, 01877,
01982
01877, 01982
01376, 01877,
01982
01481, 01998,
03028
01481, 01998,
03028
01376, 01877,
01982
01877
01376, 01877,
01982
01898
01376, 01877,
01982
Booher Brothers Cable 01376, 01877,
01982
Bouygues Telecom
03007
Bowen Cablevision
01376, 01877,
01982
Boycom Cablevision
01376
71
Reference Information
Branch Cable
Brandenburg Telecom
Brandywine
Cablevision
Bresnan
Briand et Moreau
Cable
Bright Green
Communications
Bright House
Bristol Tennessee
Essential Services
Bristol Virginia Utilities
01376, 01877,
01982
01481, 01998,
03028
01376, 01877,
01982
01376, 01877
01376, 01877,
01982
01376, 01877,
01982
01877, 01376
01877, 01998
01376, 01877,
01982
British American
01376, 01877,
01982
Broadstar
01376, 01877,
Communications
01982
Broadstripe
01376
Brockway Television
01376, 01877,
01982
Broken Bow Cable TV 01376, 01877,
01982
Brooks Bay Cable
01376, 01877,
01982
Brownwood TV Cable 01376, 01877,
Service
01982
Bryan Municipal
01376, 01877,
Utilities
01982
BT
02294
BTC Broadband
02586
Buckeye Cable System 01877, 01376,
02187
Bulldog Cable
01376, 01877,
01982
Bulloch Telephone
01376, 01877,
Cooperative
01982
Burlington Telecom
01481, 01615
Butler Bremer Mutual
01898
Telephone
Byron Cable TV
01376, 01877,
01982
72
C & W Cable
C.L. Davis Cable
Services
Cable &
Communications
Cable America
Cable Axion Digitel
Cable Communications
of Willsboro
Cable Cooperative
Cable Development
Corporation
Cable Management
Assocication
Cable Montana
Cable Nebraska
Cable Of The
Carolinas
Cable One
Cable Plus
Cable Suite
Cable Tech Cable TV
Cable TV of Camrose
Cable TV of East
Alabama
Cable TV of Slave
Lake
Cable TV of St. Paul
Cable Vision Services
Cablecom
Cablecom Mexico
Cablemas
Cablenet
CableSouth Media
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877
01376, 01877,
01982
01376
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01877
01582
01376
01376, 01877
01376, 01877,
01982
01376, 01877,
01982
Cableview
Communications
Cablevision
Cablevision du Nord
Cablevision of Marion
County
Cablevision T.R.P.
Cabovis
Caiway
CalNeva Broadband
CalTel Connections
Cameron
Communications
CAMS Cable
Canby Telcom
Cannon Valley
Cablevision
Caprock TV
Carnegie Cable
Carolina Mountain
Cable
Carr Communications
Carrell
Communications
CAS Cable
Cascade
Communications
Casey Cable
Caspian Community
TV
Cass Cable
Castle Cable Service
Catalina Cable
Catawba Services
01376, 01877,
01982
01877, 01376
01376
01376
01376, 01877,
01982
02436
02015, 0660
01376, 01877,
01982
02586
01376, 01877,
01982
01376, 01877,
01982
01481
01481, 01998,
03028
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
CBN
CBPU Cable
CCAP
CDE Lightband
Cedar Falls Utilities
Celect
Communications
Cencom
CentraCom Interactive
Central Texas
Communications
Central Valley Cable
Centre TV Cable
Centrovision
Century
Communications
Century Telephone
CenturyLink
CenturyTel TeleVideo
Chambers Cable
Champion Broadband
Chaparral Cablevision
Chariton Valley
Communications
Charter
Chatmoss Cablevision
01376, 01877,
01982
01376, 01877,
01982
01877
00858, 01615,
02586
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01998
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
02187
01376, 01877,
01982
01898, 01615
Chequamegon
Telephone Cooperative
Chesnee
01376, 01877,
Communications
01982
Reference Information
Chester Telephone
Chinook Progressive
Club TV
Chippewa Valley Cable
Choice Cable TV
Choice
Communications
Choice Television
ChoiceCable
Christy Cablevision
CimTel
Cincinnati Bell
Circle Bar Cable
Television
Cisco
Citizens Cable
Citizens Cable TV
Citizens Cablevision
Citizens Mutual
Telephone
Citizens Telecom
Citizens Telephone
City Cablevision
City of Barnesville
Cable
City of Baxter Springs
Cable
City of Hawarden
Cable
City of Norway Cable
City of Quitman Cable
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
01376
01877, 01376
01376, 01877,
01982
01877, 01982,
00858, 02589,
03028, 02132,
02345, 01582,
01883, 02378,
02401, 03265
01376
01376
01481
01376, 01877,
01982
01376, 01877,
01982
02586
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
City Of Salisaw
City of Sumas TV
Cable System
City West
Citycable
Clarence Telephone
Claro
Clear Creek
Communications
Clearview Cable
Clearview Partners
Clearview TV Cable
Clearvision Cable TV
Click Network
ClickOne
Clinton Cable
CLT Communications
ClubInternet
CMA Communications
CNS Television
Coast Cable
Communications
Coast Cablevision
01376
01376, 01877,
01982
01376
03477
01376, 01877,
01982
01376
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
02132
01376
01376, 01877,
01982
01376
01376, 01877,
01982
Coast Communications 01376
Coastal Link
01376
Coaxial Cable TV
01376, 01877,
01982
Cobridge
01376
Cobridge
01376
Communications
Cogeco
01376, 01877,
01982
Colane Cable TV
01376, 01877,
01982
Colfax Highline Cable
Collinsville Cable
Colonial Cablevision
ColtonTel
Columbia Power and
Water
Columbus Telephone
Com Hem
Com-Link
Comcast
Communication
Services
Communicomm
Community Antenna
Service
Community Antenna
System
Community Cable &
Broadband
Community Cable
Service
Community
Communications
Community Telecom
Community Television
Compas Cable
Complete
Communication
Services
Comserv Ltd
ComSouth
ComSpan
Communications
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
02378
01376, 01877
01376
00660, 02015
01376, 01877,
01982
01376, 01982,
01877, 02187
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01481, 01898
Comstar Cable TV
Consolidated Cable
Consolidated
Communications
Conuma Cable
Systems
Conway Corporation
Cable TV
Conxxus
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
Coon Creek Telephone 01376
Coon Rapids Municipal 01376, 01877,
Utilities
01982
Coop CSCF
01376
Cooperative Television 01376, 01877,
Godahl
01982
CoopTel
00858, 01615,
01898
Coosa Cable
01376
Copper Mountain
01376, 01877,
Metropolitan
01982
Country Cable
01376, 01877,
01982
Country Cable TV
01376, 01877,
01982
Country Cablevision
01376
Country Cablevision
01376
Ltd.
Cowley Telecable
01376, 01877,
01982
Cox
01877, 01376
Craig Cable TV
01376, 01877,
01982
Craw-Kan Telephone
02586
Cooperative
Crestview Cable
01376, 01877,
01982
Cross Country TV
01376, 01877,
01982
Crosslake
01376, 01877,
Communications
01982
73
Reference Information
Crow Cable TV
CRRS-TV
CRST Telephone
Authority
Crystal Cable TV
CSI Cable
CT & R Cable
CTC
Cunningham
Telephone & Cable
Curtis Cable TV
01376, 01877,
01982
01376
01481, 01998,
03028
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01376
01376, 01877,
01982
CUTV
01376, 01877,
01982
CWA Cable
01376, 01877,
01982
D & D Cable Systems 01376, 01877,
01982
D & P Communications 01376
Daeryung
01877
Dairyland Cable
01376, 01877,
Systems
01982
Dakota Central
02345
Telecommunications
Dalton Cable
01877, 01982
Television
Darty Box
02436
Davis Communications 01376, 01877,
01982
Dawson City Television 01376, 01877,
01982
DCA Cablevision
01376, 01877,
01982
DDD Cablevision
01376, 01877,
01982
Dean Hill Cable
01376, 01877,
01982
Dean's Cablevision
01376, 01877,
01982
74
Decca Cable
01376, 01877,
01982
Deffner Cable TV
01376, 01877,
01982
Delhi Telephone
01376, 01877,
01982
Delta
02015, 00660
Delta Cable
01376
Demopolis CATV
01376, 01877,
01982
Denali TV
01376, 01877,
01982
Dery Telecom
01376
Deutsche Telekom
02132
Dickey Rural Networks 01376, 01877,
01982
Digeo
02187
Diode Communications 01376, 01877,
01982
Diverse
01898, 01982
Communications
Dixie Cable TV
01376, 01877,
01982
Dixon Telephone
01376, 01877,
01982
DMS Cable
01376, 01877,
01982
Downsville Community 01376, 01877,
Antenna
01982
Doylestown Cable TV 01376, 01877,
01982
Drummond Cable TV
01376, 01877,
01982
DTC
01376, 01877,
01982
Du
02401
Dumont Telephone
01376, 01877,
01982
Duncan Cable TV
01376, 01877,
01982
Eagle Broadband
01481, 01998,
03028
Eagle Cablevision
01376, 01877,
01982
Eagle Communications 01376, 02187
Eagle Valley Telephone 01481, 01998,
03028
EagleVision Wireless
01376, 01877,
TV Services
01982
East Arkansas Video
01376
East Cleveland Cable 01376, 01877,
01982
East Texas Cable
01376, 01877,
01982
Eastern Cable
01376, 01877,
01982
EastLink
01376
Easton Cable
01877
EasyTEL
01481, 01998,
03028
Eatel
01877
Echostar
03452
Electron Enterprises
01376, 01877,
01982
Elk River Cable TV
01376, 01877,
01982
Elkhart TV Cable
01376, 01877,
01982
Emery Telcom Video
01376, 01877,
01982
Emily Coop Telephone 01481, 01615
Enhanced
01376
Telecommunications
EnTouch
01376
EPB of Chattanooga
00858
Escape Broadband
01376, 01877,
01982
Eston CATV
01376, 01877,
Cooperative
01982
ETAN Industries
01376, 01877,
01982
Etex
02586
Execulink
01376
Eyecom
01376, 01877,
01982
„
Cable Set Top Box (F to J)
F & B Telephone
FairPoint
Communications
Falls Earth Station
02586
01376, 01877,
01982
01376, 01877,
01982
FamilyView
01376, 01877,
Cablevision
01982
Fannettsburg Cable TV 01376, 01877,
01982
Farmer & Merchant
01376, 01877,
Mutual
01982
Farmer's Telephone
01998, 03028
Cooperative
Farmers Independent 01376, 01877,
Telephone
01982
Farmers Mutual
01376, 01877,
Telephone
01982
Fayetteville Electric
01877
System
Federated Telephone
01376
Fenton Cablevision
01376, 01877,
01982
FiberCast Cable
01376, 01877,
Communications
01982
FiberNet Monticello
01376, 01877,
01982
Fibrant
01376, 01877,
01982
Fidelity
01376
Communications
First Cable Of Missouri 01376, 01877,
01982
FirstMile
01376, 01877,
01982
Flint Cable TV
01376, 01877,
01982
Florida Cable
01376
Foothills Rural
01877
Telephone Cooperative
Forsyth CableNet
01376, 01877,
01982
Reference Information
Fort Jennings
Communications
Fort Towson Cable
Foster
Communications
Frank Howard TV
Cable
Frankfort Plant Board
Cable
Freebox
FTC
Full Channel TV
Full Choice
Communications
Fusion Broadband
Futuristic Cablevision
Galaxy American
Communication
Galaxy Cable
02586
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01976
01877, 01982,
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01998
Gardonville
Cooperative Telephone
Gatehouse Networks
01376, 01877,
01982
Gauthier Cablevision & 01376, 01877,
Electric
01982
GCI
01877
General
01376
Communications
Genext
01376, 01877,
01982
Geraldine Cable TV
01376, 01877,
01982
Get Real Cable
01376, 01877,
01982
GEUS
01376, 01877,
01982
Giant Communications 01376, 01877,
01982
Giles-Craig
Communications
Gilmer Cable
Television
Glasgow Electric Plant
Board
Glass Antenna
Systems
Glenwood
Telecommunications
Glide Cablevision
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
Globalcom
01376, 01877,
01982
Golden Belt Telephone 02586
Golden
01376, 01877,
Communications
01982
Golden Rain
01376, 01877,
Foundation
01982
Golden Valley Cable
01376, 01877,
01982
Golden West
01376, 01877,
Telecommunications
01982
GoldƂeld
01376, 01877,
Communications
01982
Gorham
01481
Communications
Gowrie Cablevision
01376, 01877,
01982
Grafton Cable
01376, 01877,
Communications
01982
Grand River Cable
01376, 01877,
01982
Grande
01877, 01376
Communications
Great Plains
01376
Communications
Green Hills
01376, 01877,
Communications
01982
Greene County Cable 01376, 01877,
TV
01982
Greenlight Community 01376, 01877,
Broadband
01982
Gridley Cable
01376, 01877,
01982
Griswold Cooperative 01481, 01998,
Telephone
03028
Grove Cable
01376, 01877,
01982
Grundy Center Utilities 01376, 01877
GTI
01481, 01998,
03028
Guadalupe Valley
01877
Haefele TV
01376, 01877,
01982
Haines Cable TV
01376, 01877,
01982
Hall Beach
01376, 01877,
Cooperative
01982
Hamilton County Cable 01877, 01982,
TV
01376
Hancel
01376, 01877,
01982
Hargray
01376, 01877,
01982
Harlan Community TV 01376
Harlan Municipal
01376
Utilities
Harmony Cable TV
01376, 01877,
01982
Harris Broadband
01376
Harrisonville
02586
Telephone
Harron Metrocast
01376, 01877
Hart Cable
01376, 01877,
01982
Hart Electric
01376, 01877,
01982
Hartelco
01376, 01877,
01982
Hastings Cable Vision 01376, 01877,
01982
Hathw@y
02043
Hawaiian Telcom
03028
HBC
01376, 01877,
01982
HBL Communications
HCS
Healthcare Cable
Systems
Heart of Iowa
Communications
Heartland Cable
Heartland Wireless
Communications
Heck's TV & Cable
Henderson Telephone
Hermosa Cablevision
Herr Cable
HFU Television
Hiawatha Broadband
HickoryTech
High Plains
Cablevision
Highland
Hill Top
Communications
Hinton CATV
HLM Cable Corp
HomeTel
Hometown Cable
Hometown Utilicom
Hood Canal
Cablevision
Hoonah Community
Television
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01898
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
75
Reference Information
Hooper Telephone
01376, 01877,
01982
Horizon Cable TV
01376, 02586
Horizon Telecom
02586
Horry Telephone
01376, 01877,
Cooperative
01982
Hospers Telephone
01376, 01877,
01982
Hotwire
02586
Houston Cable
01376, 01877,
01982
Hrvatski Telekom
02132
HTC Communications 01481, 01998,
03028
HTC Services
01376, 01877,
01982
Humax
00660, 02620,
02043, 02165
HunTel Systems
01376
Huxley
01376, 01877,
Communications
01982
Hydaburg Cable TV
01376, 01877,
01982
HYDE County
01376, 01877,
Cablevision
01982
i-CAN
02437
I-Speed
01376, 01877,
01982
ICE Cable Holdings
01376
ICS Communications
01376, 01877,
01982
Illini Cablevision Of
01376, 01877,
Illinois
01982
ImOn Communications 01877
Indco Cable TV
01376, 01877,
01982
Independence Telecom 01376, 01982
Utility
Independent Cable
01376, 01877,
Systems of Idaho
01982
Indevideo
01376, 01877,
01982
Index Cable TV
01376, 01877,
01982
76
Innovative Cable TV
Innovative Systems
Inotel
Inside Connect Cable
Insight
Integra Telecom
Inter Mountain Cable
Inter-County Cable
01376
01898
02437
01376
01376, 01877
02345
01877
01376, 01877,
01982
Interstate Cablevision 01481, 01998,
03028
Intertech Private Cable 01376, 01877,
01982
InviTV
02437
Iron River Cooperative 01376, 01877,
TV
01982
Irvine Community TV
01376, 01877,
01982
ITV-3
01376, 01877,
01982, 03028
J & L Cable
01376, 01877,
01982
J & N Cable
01376, 01877,
01982
Jack McClanahan
01376, 01877,
Cable TV
01982
Jackson Energy
01376, 01877,
Authority
01982
Jaguar
01376, 01877,
Communications
01982
James Cable Partners 01376, 01877,
01982
James Valley
02586
Cooperative Telephone
Jayroc Cablevision
01376, 01877,
01982
Jefferson County
01376, 01877,
Cable
01982
Jefferson Telecom
01376, 01877,
01982
Jeffersonville Cable TV 01376, 01877,
01982
Jet Broadband
01376
Johnston County
Cable
Journeyvision Cable
JP PTT
01376, 01877,
01982
01376, 01877,
01982
01615
„
Cable Set Top Box (K to N)
K-Communications
Kabel Deutschland
Kalida Telephone
Kalona Cooperative
Telephone
Kaplan Telephone
Karban TV Systems
KAS Cable TV
Kaslo Cable
KBS Cable TV
Keene Valley Video
Kelley
Communications
Kennebec Telephone
Kennedy Cablevision
Kentucky
Ridge Country
Communications
Keta Cable
KFW Communications
Kincardine Cable TV
Kings Bay
Communications
Kiss
KLiP
01376, 01877,
01982
02165
01376, 01877,
01982
02586
02586
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
02132
01376, 01877,
01982
KM Telecom
Knology
KoolConnect
Koomiut Cooperative
01481
01877, 01376
01481
01376, 01877,
01982
KPN
02952, 02437
Kraus Electronic
01376, 01877,
Systems
01982
Kudzu Cable TV
01376, 01877,
01982
Kugluktuk Cooperative 01376, 01877,
01982
Kuhn Communications 01376, 01877
L & J Cable
01376, 01877,
01982
La Harpe
01376, 01877,
Communications
01982
La Harpe Video and
01376, 01877
Data Services
Lafayette Utilities
01376
System
Laguna Serrano Cable 01376, 01877,
01982
Lake Cable
01376, 01877,
01982
Lakeland Cablevision
01376, 01481,
01877, 01982,
01998
Lakeland Telecom
01481, 01998,
03028
Lakeview Cable
01376, 01877,
01982
Lamont Digital
01376, 01877,
Systems
01982
Lang
01376, 01877,
01982
Laurel Highland
01376, 01877,
01982, 02187
LB Cable
01376, 01877,
01982
Lehigh Valley
01376, 01877,
Cooperative Telephone 01982
Lemonweir Valley
01481, 01998,
Telephone
03028
Reference Information
Lexcom Cable
Services
Liberty Cablevision
Liberty
Communications
Limestone Cablevision
Lincoln Cable
Television
Lincolnville
Lindsey
Communications
LISCO
Litestream Holdings
LNE Telco
Localtel
Lockesburg
Cablevision
Lodgenet
Entertainment
Lone Pine Cable TV
Longview
Communications
Lonsdale Video
Ventures
Loretel Cablevision
Loretel Systems
Lost Island Cable TV
Lumos Networks
Lycom
Communications
M-Tek Systems
M.T.C. Cable
Maddock Cable TV
01376, 01877,
01982
01376
01481, 02586
01376, 01877,
01982
01376
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01481, 01998,
03028
01376, 01877,
01982
01376
01376, 01877,
01982
01998, 03028
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
Madison
01376, 01982
Communications
Madison County Cable 01376, 01877,
01982
Magio Sat
02132
Magnet
01615
Mahaska
01376, 01877,
Communications
01982
Mainstreet
01376, 01877,
Communications
01982
Maitland Cable TV
01376, 01877,
01982
Mallard Cable
01376, 01877,
01982
Manawa Telecom
02586
Manning Municipal
01376, 01877,
Utilities
01982
Manti Telecom
01481, 01998,
03028
Marco Island Cable
01376, 01877,
01982
Markdale Cable TV
01376
Marne & Elk Horn
01376, 01877,
Telephone
01982
Marquette-Adams
01376, 01877,
Telephone
01982
Martelle
01376, 01877,
Communications
01982
Cooperative
Mascon Cable
01376
Masset-Haida TV
01376, 01877,
Society
01982
Massillon Cable
01376
Matanuska Telephone 01481, 02586
Association
Matrix Cablevision
01376, 01877,
01982
Mattawamkeag
01376, 01877,
Cablevision
01982
McDonough Telephone 01376, 01877,
Cooperative
01982
McKee TV Enterprises 01376, 01877,
01982
McNabb Cable
MCV Broadband
Media One
Mediacom
01376, 01877,
01982
01877
01376, 01877,
01982
01376, 01877,
01982
01376, 01982
01376
01376
02401
01376, 01877,
01982
01376, 01877
Mediapolis Telephone
Mediastream
Megacable
Meo
Merrimac
Communications
Metlakatla Indian
Community TV
MetroCast Cablevision 01376, 01982,
01877
MetroNet
01877, 0858
Metropolitan Cable
01376, 01877,
01982
MGS Cablevision
01376, 01877,
01982
MHTC
01481, 01998,
03028
Mi-Connection
01877
Microwave Satellite
01481, 01998,
Technologies
03028
Mid Century Telecom
01481, 01615
Mid Missouri
01376, 01877,
Broadband & Cable
01982
Mid Missouri
01376, 01877,
Telephone
01982
Mid-Coast Cablevision 01376, 01877,
01982
Mid-Hudson Cable
01376
Mid-Rivers
01376
Communications
Mid-South Cablevision 01376, 01877,
01982
Midamerican Cable
01376, 01877,
Systems
01982
Midcontinent
01376, 01877,
Communications
01982
Midstate
Communications
Midtel Cable TV
Milcom Cable
Milford Cable TV
Milk River Cable Club
Millennium Telecom
Millheim TV
Transmission
Millington CATV
Minburn
Communications
Minerva Valley Cable
MINET
MLGC Cable TV
MM&G Enterprises
MMDS Wireless East
Mobius
Communications
Monroe Cablevision
Monroe Utilities
Montana Opticom
Moosehead
Enterprises
Morris Broadband
Morristown Utility
Systems
Mosaic Telecom
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01481, 01998,
03028
01376, 01877,
01982
01376, 01877,
01982
01481, 01998,
03028
01376, 01877,
01982
01877
01376, 01877,
01982
01481, 01998,
03028
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01877
01376, 02586
77
Reference Information
Motorola
01376, 02437,
02378, 01998,
00858, 02952,
01562, 01982,
02401
Moultrie
01376, 01877,
Telecommunications
01982
Mountain Shadows
01376, 01877,
Cable TV
01982
Mountain
01376, 01877,
Telecommunications
01982
Mountain Zone TV
01376, 01877,
01982
Movistar
03288
Moxi
02187
Mt. Baker Cable
01376, 01877,
01982
MTC
01376, 01877,
01982
MTC Technologies
01376, 01982
MTS
01998
Multiband Cable
01376, 01877,
01982
Municipality Cable
01376, 01877,
Operator
01982
Murphy Cable
01376, 01877
Murray Electric System 01376, 01877,
01982
Muscatine Power &
01376
Water
N.W. Communications 01376, 01877,
01982
National Cable
01376, 01877,
01982
Naujat Cooperative
01376, 01877,
01982
NDTC
01481, 01998,
03028
Nebraska Central
01376, 01877,
Telecom
01982
NEIT
01376, 01877,
01982
Nelson County
01376, 01877,
Cablevision
01982
78
Nelsonville TV Cable
Nemont
Communications
NET
New Century
Communication
New Day Broadband
01376, 01877,
01982
01376, 01877
01883
01376, 01877,
01982
01376, 01877,
01982
New England Cable
01376, 01877,
01982
New Jersey
01376, 01877,
Broadband
01982
New Knoxville Cable
01376, 01877,
Systems
01982
New North Networks
01376, 01877,
01982
New Paris Quality
01376, 01877,
Cablevision
01982
New Visions
01376, 01877,
Communications
01982
New Windsor Cable TV 01376, 01877,
01982
Newcastle Cablevision 01376, 01877,
01982
Newpath
01877, 01982
Communications
NewWave
01376, 02187
Communications
NexHorizon
01376, 01877,
Communications
01982
Nexicom
01376, 01877,
Communications
01982
Nextgen
01376, 01877
Communications
Niagara Community
01376, 01877,
TV Cooperative
01982
Nimpkish Valley
01376, 01877,
Communcations
01982
Nittany Media
01376
Nor-Cal Cable
01376, 01877,
Systems
01982
Nortex
01376, 01877,
Communications
01982
North American
Communications
North Central
Telephone
North Crossroads
Communications
North Dakota
Telephone
North Star Cablevision
North State
Communications
North Texas
Broadband
North Yellowstone
Cable TV
Northern Cable
Holdings
Northern Lakes Cable
TV
Northland
Communications
Northside TV
Northstar Broadband
Northwest
Communications
Northwest Community
Northwest Iowa
Telephone
Northwest Telephone
Cooperative
NorthwesTel
Norvado
Norwood Light
Broadband
Nova Cable
Management
Nova Cablevision
Novus
NPG Cable
Nsight
01376, 01877,
01982
02345
01376, 01877,
01982
02586
01376, 01877,
01982
00858
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01982
01376, 01877,
01982
01877
01877
01376, 01877,
01982
01376
02586
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877
01376
02345, 02586
NTC Cable Services
01376, 01877,
01982
nTelos
01998
NTL
01060
NTS Communications 01376, 01877,
01982
NU Telecom
01998, 03028
NuLink
01877, 01376,
01982
Numericable
02436
Nushagak Cooperative 01376, 01877,
01982
„
Cable Set Top Box (O to S)
Oak Cable Systems
Of Iowa
Oak Hill Cablevision
01376, 01877,
01982
01376, 01877,
01982
Oasis Communications 01376, 01877,
01982
Oi TV
03452, 03454
Omni III Cable TV
01376, 01877,
01982
Oneida Cablevision
01376, 01877,
01982
OneLink
01376, 01877,
01982
OneSource
01376
Communications
Ono
01562
Open IPTV
01615
Opp Cablevision
01376, 01877,
01982
Optimum
01877
Optimus Clix
02437
Optus
01060
Orange
02407
Orbitel
01376
Communications
Oregon Cable Group
01376, 01877,
01982
Orion Cablesystems
01376, 01877,
01982
Reference Information
OTEC
Communications
Our Cable
02586
01376, 01877,
01982
Overton County Cable 01376, 01877,
01982
Oxford Networks
01376, 01877,
01982
Pace
01877, 01060,
02620, 01982,
01582, 01376,
01883, 02401,
03454
Packerland Broadband 01376
Paleajook Cooperative 01376, 01877,
01982
Palmer Mutual
01376, 01877,
Telephone
01982
Palmetto Rural
00858
Telephone Cooperative
Panasonic
01982
Pangnirtung
01376, 01877,
Cooperative
01982
Panhandle Telephone 01376
Panora
01481
Telecommunications
Paragould Light &
01376, 01877,
Water
01982
Parish
01376, 01877,
Communications
01982
Park Region Mutual
01481, 01998,
Telephone
02345, 03028
Park TV & Electronics 01376, 01877,
01982
Partner
01376, 01877,
Communications
01982
Pathway Com-Tel
01376, 01877,
01982
Patterson Cable TV
01376, 01877,
01982
Paul Bunyan
02586
Communications
PBT Cable Services
01376, 01877,
01982
PC One Cable
01376, 01877,
01982
PDQ Cable TV
01376, 01877,
01982
PEC Cablevision
01376, 01877,
01982
Pegasus
01376, 01877,
Communications
01982
Peoples CATV
01376, 01877,
01982
Persona
01376, 01877,
Communications
01982
Philippi
01376, 01877,
Communications
01982
Philips
01582, 02294
Phoenix
01376
Phoenix Cable
01376, 01877,
01982
Phonoscope
01376, 01877,
Communications
01982
Pickwick Cablevision
01376, 01877,
01982
Piedmont Cable
01376, 01877,
Services
01982
Pine Bluff Cable
01376
Pine Island Telephone 01481, 01998,
03028
Pine River Cable
01376, 01877,
01982
Pine Tree Cablevision 01376, 01877,
01982
Pineland Telephone
01481, 01615,
Cooperative
01898, 02586
Pinpoint
01376, 01877,
Communications
01982
Pioneer
01877
Pioneer Cable
01376, 01877,
01982
Pioneer
01376, 01877,
Communications
01982
Pioneer Long Distance 01898, 01615
Pitcairn Community
01376, 01877,
Cable TV
01982
Plantation Cable
System
Pleasant Vision
01376, 01877,
01982
01376, 01877,
01982
Polar Communications 02586
Polaris Cable
01376, 01877,
01982
Ponderosa Cablevision 01376, 01877,
01982
Poplar Bluff Municipal 01481, 01998,
Utilities
03028
Portal Cablevision
01376, 01877,
01982
Portugal Telecom
02401
Post Cablevision
01376, 01877,
01982
Premier
01376
Communications
Premiere
02620
Price County
01481, 01998,
Telephone
03028
Prime Cable
01376, 01877,
Corporation
01982
Prime Time Cable
01376, 01877,
01982
Princetown Cable
01376, 01877,
01982
Private Cable Systems 01376, 01877,
01982
Private Network Cable 01376, 01877,
Systems
01982
Project Mutual
01481, 01998,
Telephone
03028
Project Services
01376, 01877,
01982
PSC
01481, 01998,
03028
PTCI
01376
PVT Networks
01376, 01877,
01982
Quality Cable TV
01376, 01877,
01982
Quality One
01481, 01998,
Technologies
03028
Quinter Cable
Qwerty.TV
R & R Cable
Raftview
Communications
Rainbow Cable
Rainbow
Communications
Rainbow Lake Cable
TV
Rainier Connect
Ramapo Cable
01376, 01877,
01982
01898
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
Rancho Murieta
Association
Randolph Telephone
02586
Rapid Communications 01376, 01877,
01982
RC Communications
01376, 01877,
01982
RCN
01376
Reach Broadband
01376, 01877,
01982
Readlyn Telephone
02586
Rebeltec
01376, 01877,
Communications
01982
Red River Cable
01376, 01877,
01982
Reds Cable TV
01376, 01877,
01982
Regional Cable TV
01376, 01877,
01982
Reinbeck
01376, 01877,
Telecommunications
01982
Reservation Telephone 01376, 01998,
02345
Reserve Long
01376, 01877,
Distance
01982
Resnet
01376, 01877,
Communications
01982
Resort Cable
01376
79
Reference Information
Reveille Broadband
01376, 01877,
01982
Reynolds Cable
01376, 01877,
01982
RGA Cablle
01376, 01877,
01982
Ridgewood
01376, 01877,
Cablevision
01982
Ringgold Telephone
01376, 01877,
01982
Rio Virgin Telephone
01376, 01877,
01982
Riondel Community
01376, 01877,
Cable Society
01982
Ripley Video Cable
01376, 01877,
01982
Ritter Cable
01376, 01877,
01982
River Road Cable
01376, 01877,
01982
River Valley Cable TV 01376, 01877,
01982
River Valley
01481, 01998,
Telecommunications
03028
Riverside Cablevision 01376, 01877,
01982
Riviera Cable TV
01376, 01877,
01982
Robins Cable TV
01376, 01877,
01982
Rock Port Cablevision 01376, 01877,
01982
Rocky Mountain Cable 01376, 01877,
Systems
01982
Rogers
01877, 01376
Roome
01376, 01877,
Telecommunications
01982
Royal Telephone
01376, 01877,
01982
RTC
01376, 01877,
01982
RTEC
01376, 01877,
Communications
01982
80
Runestone Telcom
Rural Route Video
Rural Telephone
Company
RuralWest
Russellville Electric
Plant Board
S & K TV Systems
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
02586
01376, 01877,
01982
S & T Communications 01376, 01877,
01982
S-GO Video
01877, 01982
S.Bryer Cable TV
01376, 01877,
01982
Sagem
02407, 02436,
03288
Sagemcom
02407, 02436,
03007
Sallisaw Municipal
01376, 01877,
Authority
01982
Samsung
02407, 02015,
01877, 03477,
01060, 01987,
02589, 03265
San Bruno Municipal
01376, 01877,
Cable TV
01982
San Carlos
01376, 01877,
Cablevision
01982
San Juan Cable
01376, 01877,
01982
San Simeon
01376, 01877,
Community Cable
01982
Santel Comm
01376, 01877,
Cooperative
01982
Sasktel
01998
Satellite Cable
01376, 01877,
Services
01982
Satview Broadband
01376, 01877,
01982
Saugeen Telecable
01376, 01877,
01982
Savage
Communications
Sayward Valley
Communications
Schindler Cable TV
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
SCI Cable
01376, 01877,
01982
ScientiƂc Atlanta
01877, 01982,
00858, 01987,
02401, 02436,
02345, 03028
Scio Cablevision
01376, 01877,
01982
Scott Telecom And
01376, 01877,
Electronics
01982
Scottsboro Cable TV
01376, 01877,
01982
Sea Island
01877
Seaside Cable TV
01376, 01877,
01982
Seaview
01376, 01877,
Communications
01982
SecureVision
01376, 01877,
01982
Semo Communications 01376, 01877,
01982
Senior TV
01376, 01877,
01982
Service Electric
01376, 01877,
01982
Service One Cable
01376, 01877,
01982
Shannon Vision
01376, 01877,
01982
Shaw
01376, 01877,
02187
Shawano Municipal
01376, 01877,
Utilities
01982
Shellsburg Cablevision 01376, 01877,
01982
Shen-Heights TV
01376, 01877,
01982
Shenandoah Cable
Shenandoah
Telecommunications
Shentel
Sherburne Cable
Sherman Cablevision
Shrewsbury Electric &
Cable
Silver Star
Communications
Simpson Country
Cable TV
SingTel
Siskiyou Cablevision
Sister Lakes Cable
Sjoberg's Cable TV
Skisat
SKT
SKY
Sky Angel
Sky Cablevision
SKY Deutschland
Skyline Cable
SkyPix
Sleepy Eye Telephone
Small Town Cable
Smile Content
Smithville
Sogetel
SomerƂeld Cable TV
Source Cable
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877
01481, 01998,
03028
01376, 01877,
01982
01998
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01877,
01982
02620
01376, 01877,
01982
01376, 01877,
01982
02620
02586
01481, 01998,
03028
02345
01376, 01877,
01982
02437
02586
01998
01376, 01877,
01982
01376
Reference Information
South Benton
Cablevision
South Central
Communications
South Holt Cablevision
South Slope
Communications
Southeast Cable TV
Southern Cayuga
County Cable
Southern Coastal
Cable
Southern Kansas
Telephone
Southern Plains Cable
Southern Vermont
Cable
Southey Cable
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01982
01376, 01877,
01982
Southside TV
01376, 01877,
01982
Southwest MN
01376, 01877,
Broadband
01982
Southwestern Bell
01376, 01877,
Video Services
01982
Spanish Fork
01376, 01877,
01982
Spencer Municipal
01376, 01877,
Utilities
01982
Spillway Cablevision
01376, 01877,
01982
Spirit Broadband
01376, 01877,
01982
Spring Creek Cable
01376, 01877,
01982
Springcom
01376, 01877,
01982
SpringƂeld Cablevision 01376, 01877,
01982
Springville Cable
01376, 01877,
01982
St. George Island
Cable
St. John Cable
01376, 01877,
01982
01376, 01877,
01982
Stanley Cablevision
01376, 01877,
01982
Stanton Telecom
01376, 01877,
01982
Star Cablevision
01376, 01877,
01982
Starkville Cablevision
01376, 01877,
01982
Starlight
01376, 01877,
Communications
01982
Starview Cable of
01376, 01877,
Delaware
01982
Starvision
01376, 01877,
01982
Starwest
01376, 01877,
01982
Stellar
01376, 01877,
Communications
01982
Stellar Private Cable
01376, 01877,
Systems
01982
Stofa
02015
Stowe Cablevision
01376, 01877,
01982
Strategic Technologies 01376, 01877,
01982
Stubbs
01376, 01877,
Communications
01982
Suddenlink
01877, 01376
Summit Broadband
01376, 01877,
01982
Summit
01376, 01877,
Communications
01982
Sumner Cable TV
01376, 01877,
01982
Sun Country Cable
01376
Sunrise
01376, 01877,
Communications
01982
Supercanal
01376
Superior Cable & Data 01376, 01877,
01982
Supervision Cable TV
SureWest
Surry Telephone
SWAT Cooperative
Sweetwater Cable TV
Swisher Telephone
01376, 01877,
01982
01481, 01998,
02586
02586
01481, 01998,
03028
01376, 01877,
01982
02345
„
Cable Set Top Box (T to Z)
T-Home
TA Communications
Taloga Cable
TAT Cablevision
Tbaytel
TCSI Huntsville
TCT
TDS
TDS Telecom
Technicolor
Tekstar Cablevision
Tel-Star Cablevision
Tele-Media
Tele-Services
Tele2
Telecentro
Telecom Cable
Teledistribution Amos
Telefonica
Telenet
02132
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
03028
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
03028
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
00660
01376
01376, 01877,
01982
01376
03288, 03028
01920, 03477
Telepak Networks
TelePartners
Telerent Leasing
Corporation
Telestar Systems
Telewest
Telmex
Telsat Systems
Telus
Templeton Telephone
TeNeT
Tesco Cable TV
Texas Mid-Gulf
Cablevision
Thames Valley
Communications
The Community
Agency
The Town of Mountain
Village Cable
Thomson
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01987
01376
01376, 01877,
01982
03028
01376, 01877,
01982
01898
01376, 01877,
01982
01376
01376, 01877,
01982
01376
01376, 01877,
01982
01582, 01982,
03007, 02407
Three River Digital
01376, 01877,
Cable
01982
Throckmorton
01376, 01877,
Cablevision
01982
TiftNet
01376, 01877,
01982
Time Warner
01877, 01376,
02187
Tip-Top
01376, 01877,
Communications
01982
TiVo
03265
Tobacco Valley
01376, 01877,
Communications
01982
Tongue River Cable TV 01376, 01877,
01982
Total Cable Service
01376
81
Reference Information
Touchet Valley
Television
TP
Trans-Video
Trappers Loop
Communications
Trenton Cable
Tri-County Cable TV
TrioTel
Communications
Troy Cablevision
Trust Cable TV
TruVista
Tudjaat Cooperative
Tulalip Broadband
Tullahoma Utilities
Tulugak Cooperative
Turquoise Turtle TV
TV Cable
TV Cable Company of
Andalusia
TV Cable of Winamac
TV Northeast
TV Service
TVB
TVC
TVision
TVMAX
TVS Cable
82
01376, 01877,
01982
02407
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
02586
01376, 01877,
01982
01376, 01877,
01982
01376
01376
01376, 01877,
01982
01481, 01998,
03028
01376, 01877,
01982
01615
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
Twin Valley
Communications
Two Creeks Cable
Ucluelet Video
Uintah Basin
Electronic Telecom
UMBC
Union Telephone
02586
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376
Unitah-Strata
Networks
United
01376
Communications
Association
United States Gypsum 01376, 01877,
01982
United Telephone
01376, 02586
Unitymedia
03477
Universal Cablevision 01376, 01877,
01982
Universal Satellite
01376, 01877,
Cable
01982
UPC
01582, 03477,
00660, 01060
UPC Cablecom
01582, 03477
Upper Peninsula
01376, 01877,
Communications
01982
US Online
01376, 01877,
01982
US Sonet
01376, 01877,
01982
USA Cablesystems
01376, 01877,
01982
USA Companies
01376, 01877,
01982
Utica Cablevision
01376, 01877,
01982
Utilities Board City of
01376
Foley
Utility Systems
01376, 01877,
Development
01982
Uwharrie
Communications
Valley Cable & Satellite
Communications
Valley Cable TV
Valparaiso
Communications
Venture
Communications
Cooperative
Venus Telephone
Cooperative
Veracity
Communications
Verizon
Vernon Telephone
Cooperative
Vicksburg Video
Videotron
Vidia Communications
Vidion Cable
Viken Fibernett
Viola Communications
Virgin Media
Vision
Communications
VisionComm
02586
01376, 01877,
01982
01376, 01877,
01982
01376
01481, 01998,
03028
01376, 01898
01376, 01877,
01982
02378
02586
Wadsworth Cable TV
WaitsƂeld Cable
Walnut
Communications
Walnut Grove Cable
TV
Ward Communications
Warwick Valley
Telephone
Washington County
Rural Telephone
Cooperative
Watch TV
Waterville Cable TV
Watson Cable
01376
01877
01376, 01877,
01982
01376, 01877,
01982
02437
01376, 01877,
01982
01987, 01060,
03265
01376
01376, 01877,
01982
Vital Communications 01376, 01877,
01982
Vivo
03288
Vodafone
02401
Vogtmann Engineering 01376, 01877,
01982
Volcano Vision
01376
W.D.B.
01376, 01877,
Communications
01982
Wabash Independent
01376, 01877,
Networks
01982
Wave Broadband
Wavevision
WCTA
01376
01376
01376, 01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01481, 01998,
03028
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877
01376, 01877,
01982
03028
WEHCO Video
Weiss Lake Cable
West Alabama TV
Cable
West Carolina
Telephone
West Central
01376, 01877,
Telephone
01982
West Lake Cablevision 01376, 01877,
01982
West River Cable
01376, 01877,
Television
01982
WesTel Systems
01376, 01877,
01982
Western Broadband
01376, 01877,
01982
Western Cable Service 01376, 01877,
01982
Western Iowa
01877
Telephone
Reference Information
Western Telephone
Company
Western Wisconsin
Communications
Westman
Communications
Westphalia Broadband
Wetherell Satellite
Cable TV
WFL Cable Television
White County Video
WideOpenWest
Wikstrom Systems
Wilco Electronic
Systems
Wilkes
Telecommunications
Willamette Broadband
Windbreak Cable TV
Windjammer Cable
Windom
Communications
Windstream
Winslow
Communications
Wire Tele-View
Wireless One
Wittenberg Telephone
Wood County
Telephone
WoodsƂeld Municipal
Cable
Worth Cable TV
WT Services
01376, 01877,
01982
01376, 02586
01376, 02187
02586
01376, 01877,
01982
01376, 01877,
01982
01376
01376, 01877,
02187
01376, 01877,
01982
01376, 01877,
01982
01481, 01998,
03028
01376
01376, 01877,
01982
01376, 01877
01877
01376, 01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
01376, 01877,
01982
WTC Communications 01376, 01877,
01982
WTCI Cable
01376, 01877,
01982
Wyandotte Municipal
01376, 01982
Yadkin Valley Telecom 02345
Ycom Networks
01376, 01877,
01982
Yelcot Video Group
01376, 01877,
01982
Yelo
01376
Ygnition
01376, 01877,
01982
Zampelli Electronics
01376, 01877,
01982
Ziggo
02589, 02015,
00660, 02401
Zito Media
01376, 01982
Zoom Media
01376, 01877,
01982
„
Satellite Set top Box
@sat
Acoustic Solutions
ADB
AEG
Agora
Airis
Airtel
Akira
Alba
Altech UEC
Amstrad
AMTC
Arledge Electronics
Arnion
ASDA
AssCom
Astro
Aurora
01300
01284
00887
02738, 02813
01284
02813
02248
02738
01284, 02034
02059
00847, 01662,
01175, 01693,
02467
02738, 02813
00775
01300
01284
00853
01100, 02026
00879
Austar
Auvisio
Avanit
Axil
Ballard Rural
Telephone Cooperative
Bell
Bell Satellite TV
Biostek
Black Diamond
Boca
Boshmann
Boxer
BskyB
Bulltech
Bush
Cablecom
Caiway
Canal Digitaal
Canal Digital
Canal+
CanalSat
Century
CGV
Chess
Cignal
City of Cawker City
Cable
CityCom
Claro
Clatronic
Com Hem
Comag
Coship
Country Vision Cable
Croner
Crown
Cyfra+
00879
02738, 02813
01631
02738
00775
00775
00775
02738
01284
02026, 02813
01631
02443, 01692
01175, 00847,
01662
02738
02376, 01284,
02034, 02813
01195, 01197
02443, 00253
00853, 02957
00853
00853, 02657,
01195, 01197
00853, 02657
00856
02034
02026
02835
00775
01176
03787, 03790
02738
01176, 01915
02026, 02813
03787, 03790
00775, 00869
02813
01284
00853, 01409
Cyfrowy Polsat
D-box
DASAN
Delta
Denver
Deutsche Telekabel
Dgtec
Dicra
Digi
Digiality
Digihome
DigiLogic
DigiQuest
DigitAlb
DigitalBox
Digiwave
DirecTV
Dish Network
Dishpro
DishTV
DMT
DMTech
DRE
Dream Multimedia
DSE
DSTV
DTK Deutsche
Telekabel
Dual
Durabrand
Dyon
Echostar
Edision
Elta
Energy Sistem
Etisalat
Evesham Technology
00253, 0853,
01409
01114
03321
02443
02738
01195, 01197
01631
02738
02026
02813
01284, 02034
01284, 02034
01300, 02738,
01631
01195, 01197
01631, 01100
01631
01377, 00099
00775
00775
01300
03321
02738
01176
01237, 01652,
01923
02813
00879
01195, 01197
02034
01284, 02034
02738, 02813
00775, 00853,
01409
01631
02738
01631, 02813
02443
02034
83
Reference Information
Finlux
FinnSat
Fortec Star
Foxtel
Freesat
Freesat+
Frontier
Communications
Fuji Onkyo
Galaxis
General Instrument
General Satellite
Globo
GoGen
GOI
Gold Box
Gold Vision
Goodmans
Gradiente
Grocos
Grundig
Hanseatic
HD+
HDT
Hirschmann
Hitachi
Hornet
HTS
Huawei
Hughes Network
Systems
Humax
ibox
84
02034
01195, 01197
01631
01356, 00879,
01176
01692, 02376
02443
00775
01631
00853, 00879
00869
01176
02026, 02957
02738
00775
00853
01631
01284, 02376,
02034
00887, 00856,
00099
01409
00847, 02376,
02034, 01284,
00853, 00879
01100
02443
03321
02026
02034, 01284
01300
00775
03787
01377
01176, 02443,
01808, 01915,
02408, 01377,
03321, 01989,
02616
01652
ID Digital
Illusion
Imagin
Imperial
Indovision
iNETBOX
Innova
IQ
ISkyB
JVC
Kabel Deutschland
KabelBW
KabelNoord
Kaon
Kenwood
Koenig
KT
Lava
LG
Linsar
Lodos
Logik
LogiSat
Luxor
Macab
Majestic
Manhattan
Maplin
Marusys
Mascom
Matsui
Maximum
Mediabox
MediaSat
Mediascape
Medion
Mega TV
MegaSat
01176
01631
01195, 01197
01195, 01197
01989, 00856,
00887
01652, 01237
00099
02813
00887
00775, 01284
01195, 01197
01195, 01197,
01915
00253, 02443
01300
00853
01631
03321
01631
03321
01284
01284
01284, 02034
02026, 02813
02034
00853
02738
01300
02034
03543
02738
01284
02813
00853
00853
02835
02026
03321
02034, 02813,
01631, 02738
Metronic
Micro
Micro electronic
Milestone
Communications
Mitsai
Morgan's
Motorola
Movistar
Multichoice
Murphy
Mysat
NET
Netsat
Next Level
Nokia
NPG
NTV Plus
Olleh TV
Olleh-Skylife
Onn
Opticum
Optus
Orbitech
Orton
Pace
PaciƂc
Palcom
Palsonic
Panasat
Panasonic
02738, 01631
02813
02813
00775
02738
02026
00869, 00856,
03469
01409
00879, 02059,
02060
02034
02738
01409
00099, 00887
00869
00853
01631
01692, 02443
03321
03321
02034, 01284
02957
00879, 01356
01100, 01195,
01197
02957
00847, 01356,
00887, 01175,
01693, 00853,
01662, 02467,
02657, 03469,
01377, 02059,
02060, 02211,
03787, 03790,
02620
01284
01409
02813
00879
00847
Philips
Pioneer
PLDT
Premiere
Primacom
Pro Basic
Proline
Qook TV
Qook-SkyLife
Qwest
RadioShack
Raduga TV
RiksTV
Roadstar
SAB
Sagem
Sagemcom
Samsung
Sat Control
SAT+
Satellite Operations
Satplus
SatyCon
Schaub Lorenz
Schwaiger
Schwaiger CS
Scott
SEG
Shark
Sharp
Shaw Direct
Sherwood
00099, 00853,
01114, 02619,
00856, 00887,
02211, 03469
00853
02835
01114, 01195,
01197
01176, 01195,
01197
00853
01284
03321
03321
01377
00869
02957
01692
00853
01300, 01631
01692, 01114
01692
03063, 00253,
01377, 01989,
02467, 00853,
03321, 01662,
01693, 03834
01300
01409
00775
01100
01631
02034
01631, 02813,
02957
01631
02738
01284, 02034
01631
02034
00869
01409
Reference Information
Shinelco
Sigmatek
SilverCrest
SKY
Sky Brasil
SKY Deutschland
SKY Italia
SKY Mexico
SKY New Zealand
SKY PerfecTV!
SkyCable
SkyLife
Skylink
Skymaster
Skyplus
SkySat
Skyworth
SL
SM Electronic
Smart
Sony
Star
Star Choice
Stream System
Strong
Sunny
Sunstech
Supernova
T-Mobile
02738
02738, 02813
02026
00856, 00847,
01662, 00887,
01175, 02619,
01693, 00099,
01114, 01377,
01915, 02467,
03469
00856, 00887,
01377, 02619
02443, 01114,
01915, 02620
01693, 02467,
00853, 01356
00856, 02619,
00887, 01377,
03469
02211
02616
01631
03321
02443, 02957
01409
02026, 01175
01100
01631, 02835
02026
01409
01631
00847, 00853
00887
00869
01300
01409, 00879,
02813, 01300,
00853, 01284
01300
02738
00887
02443
TATA Sky
TDS Telecom
Teac
Technicolor
Technika
TechniSat
Techwood
tekComm
TELE System
Tele2
Telefonica
Telestar
Televes
Teleview
Communications
Televisa
Telsey
Telstra
Telus
Tevion
Thomson
TNT SAT
Toshiba
TrekStor
Triangle
Communication
System
Triax
Tricolor TV
True Visions
TV Vlaanderen
TVA Digital
TVB
UEC
03575
00775
02813
03469
01284, 02034
01195, 01197,
01100, 02813
01284, 02034
02738
01409, 02738,
02813
01195, 01197
01692, 01409
01100, 01197,
01195
01300
00775
00887
02738
01356
00775
01409, 02026,
02813
00847, 01175,
00853, 01662,
02619, 03469
01692, 01195,
01197
01284
02738
00775
00853, 01631
01176
02408
00853
01692, 01409
01989
00879, 01356
United Satellite
America
United States Wireless
Unitymedia
Unixbox
USA Wireless Satellite
TV
Vectra
Vestel
Via Embratel
Viasat
VisionNet
Viva
Vivo
Voom
VTC
Vu+
Walker
Wharfedale
Windstream
Wisi
World Satellite Cable
Systems
Woxter
Xoro
Xtreme
Yes
Zehnder
Zenith
Ziggo
Zircon
00775
00775
01915
01652
00775
01195, 01197
01284, 02034
03787
01197, 0253,
01195
01631
00856
01409
00869
03834
03543
02034, 01284
02034
00775
02957
00775
02813, 02738
02813
01300
00887, 01631
02034, 03469
00856, 00253
02443
02957
„
Video - Accessory
A.C.Ryan
ABS
Acer
Alienware
Apple
Boxee
Claritas
02709, 03350
01272
01272
01272
02615
03693
01272
CyberPower
D-Link
Daily Media
Dell
Digitech
Elonex
Eminent
Emtec
Fantec
Fujitsu Siemens
Gateway
Hewlett Packard
hFX
Howard Computers
Hush
iBUYPOWER
iconBIT
ISTAR
Linksys
Mede8er
Media Center PC
Microsoft
Mind
NiveusMedia
Northgate
Packard Bell
Philips
PopBox
Popcorn Hour
Ricavision
Roku
Sony
Stack 9
Systemax
Tagar Systems
Toshiba
Touch
Trust
VIA Technologies
Viewsonic
Voodoo
01272
03693
01272
01272
02260
01272
02260
02709
02709
01272
01272
01272
01272
01272
01272
01272
02709, 03350
02260
01272
02709
01272
01272, 01805
01272
01272
01272
01272
01272
02260
02260
01272
03061
02713, 01272
01272
01272
01272
01272
01272
01272
01272
01272
01272
85
Reference Information
Western Digital
Woxter
Xbox
ZT Group
02558
02709
01805, 01272
01272
„
CD
Advantage
AH!
Aiwa
Arcam
Atoll Electronique
Audio Research
Audiolab
Audiomeca
Audioton
AVI
Balanced Audio
Technology
Cairn
California Audio Labs
Cambridge
Cambridge Audio
Carver
CCE
Cyrus
Denon
DKK
DMX Electronics
Dynaco
Genexxa
Goldmund
Grundig
Harman/Kardon
Hitachi
Integra
JVC
Kenwood
Krell
Linn
Loewe
86
70032
70157
70157
70157
70157
70157
70157
70157
70157
70157
70157
70157
70029, 70303
70157
70157
70157
70157
70157
70766
70000
70157
70157
70032, 70000
70157
70157
70157
70032
71817
70072
70157, 70036
70157
70157
70157
Magnavox
Marantz
Matsui
MCS
Memorex
Meridian
Micromega
Miro
Mission
Myryad
NAD
Naim
NSM
Onkyo
Optimus
Panasonic
Philips
Pioneer
Polk Audio
Primare
Proton
QED
Quad
Quasar
Radiola
RCA
Restek
Revox
Rotel
SAE
Sansui
SAST
Siemens
Silsonic
Simaudio
Sonic Frontiers
Sony
Sylvania
TAG McLaren
Tandy
70157
70157, 70029
70157
70029
70032
70157
70157
70000
70157
70157
70721, 70000
70157
70157
71817
70032, 70000
70303, 70029
70157
70032
70157
70157
70157
70157
70157
70029
70157
70032
70157
70157
70157
70157
70157
70157
70157
70036
70157
70157
70000, 70490
70157
70157
70032
Tascam
Teac
Technics
Thorens
Thule Audio
Universum
Victor
Wards
Yamaha
Zonda
73095, 73511,
73533
73531, 73532,
73551
70303, 70029
70157
70157
70157
70072
70032, 70000,
70157
70036, 70032,
70490
70157
Technics
Thorens
Victor
Wards
Yamaha
40229
40029
40244
40027, 40029
40097
„
Audio - Accessory
Apple
Jamo
Onkyo
Polk Audio
81115
82228
81993, 82351,
82990
82228
„
Receiver
„
Cassette Deck
Aiwa
Arcam
Audiolab
Carver
Denon
Grundig
Harman/Kardon
Inkel
JVC
Kenwood
Magnavox
Marantz
Myryad
Onkyo
Optimus
Panasonic
Philips
Pioneer
Polk Audio
Radiola
RCA
Revox
Sansui
Sony
Tascam
40029
40076
40029, 40229
40029
40076
40029
40029
40070
40244
40070
40029
40029
40029
42157
40027
40229
40029, 40229
40027
40029
40029
40027
40029
40029
40243, 40170
73095
Integra
Onkyo
52503
52503
„
Cable PVR Combination
Access
Communications
Adams Cable TV
ADB
Armstrong
Arris
Atlantic Broadband
ATMC
Bend Broadband
Blue Ridge
Communications
Bright House
Buckeye Cable System
Cable Axion Digitel
Cable One
Cablecom
Cablevision
Cablevision du Nord
CCAP
Charter
01376, 01877
01376
01920
01376, 01877
02187
01877
01376
02187
01877
01877, 01376
01376, 01877,
02187
01376
01376, 01877
01582
01877, 01376
01376
01877
01376, 01877,
02187
Reference Information
Cincinnati Bell
Cisco
Citycable
Cogeco
Comcast
Cox
Darty Box
Digeo
Freebox
Grande
Communications
Humax
ImOn Communications
Insight
Inter Mountain Cable
Kabel Deutschland
Knology
Mediacom
MetroCast Cablevision
Midcontinent
Communications
Motorola
Moxi
NET
NorthwesTel
Novus
Numericable
Pace
Panasonic
Philips
Pioneer
RCN
Rogers
Sagem
01877, 01376
01877, 02589,
01982, 01582,
01883, 02401,
03265
03477
01376, 01877,
01982
01376, 01877,
01982, 02187
01877, 01376
02436
02187
01976
01877, 01376
02620, 02165
01877
01376, 01877
01877
02165
01877
01376, 01877
01877
01376, 01877
01376
02187
01883
01376
01376, 01877
02436
01877, 02620,
01582, 01883
01982
01582
01877
01376
01877, 01376
02436
Samsung
ScientiƂc Atlanta
Service Electric
Shaw
SKY
SKY Deutschland
Source Cable
Suddenlink
Telenet
Telewest
Thomson
Time Warner
TiVo
Unitymedia
UPC
UPC Cablecom
Videotron
Virgin Media
Wave Broadband
Western Iowa
Telephone
Westman
Communications
WideOpenWest
Ziggo
03477, 01877,
01987, 02589,
03265
01877, 01982,
01987, 02436,
02401
01376, 01877
01376, 01877,
02187
02620
02620
01376
01877, 01376
01920, 03477
01987
01582
01877, 01376,
02187
03265
03477
01582, 03477
01582, 03477
01877
01987, 03265
01376
01877
01376, 02187
01877, 01376,
02187
02589
„
IPTV
ADB
Alcom
Altibox
Amino
02586, 01481,
01998, 03028
02437
02437
01615, 01481,
01898, 01998,
03028
Arkwest
Arvig Communication
Systems
AT&T
ATMC
Ballard Rural
Telephone Cooperative
Bayland
Communications
Bell
Bell Aliant
Bell Fibe TV
Bledsoe Telephone
Cooperative
Bloomingdale
Communications
Blue Valley
Telecommunications
Bouygues Telecom
Brandenburg Telecom
BT
BTC Broadband
Burlington Telecom
Cabovis
CalTel Connections
Canby Telcom
Cannon Valley
Cablevision
CenturyLink
Cisco
ClubInternet
CoopTel
CRST Telephone
Authority
Dakota Central
Telecommunications
Dalton Cable
Television
Delta Cable
01481, 01998
01998, 02345
00858
01998, 03028
02586
02586
01998
01998
01998
01481, 01998
01481, 01998,
03028
01898
03007
01481, 01998
02294
02586
01481, 01615
02436
02586
01481
01481, 01998
01998
00858, 03028,
02345, 02378
02132
00858, 01615,
01898
01481, 01998
02345
01877, 01982
01376
Diverse
Communications
Du
Eagle Broadband
Eagle Valley Telephone
EasyTEL
Echostar
Etex
Farmer's Telephone
Cooperative
Golden Belt Telephone
Gorham
Communications
Griswold Cooperative
Telephone
GTI
Harrisonville
Telephone
Hathw@y
Horizon Cable TV
Hotwire
HTC Communications
Innovative Systems
Inotel
Integra Telecom
Interstate Cablevision
JP PTT
Kiss
KM Telecom
KoolConnect
KPN
Lakeland Cablevision
Lemonweir Valley
Telephone
Liberty
Communications
Lonsdale Video
Ventures
Lumos Networks
Manawa Telecom
01898
02401
01481, 01998
01481, 01998
01481, 01998,
03028
03452
02586
01998, 03028
02586
01481
01481, 01998
01481, 01998,
03028
02586
02043
02586
02586
01481, 01998
01898
02437
02345
01481, 01998
01615
02132
01481
01481
02952, 02437
01481, 01998
01481, 01998
02586
01481, 01998
01998, 03028
02586
87
Reference Information
Manti Telecom
Matanuska Telephone
Association
Meo
MHTC
Microwave Satellite
Technologies
Millennium Telecom
Minburn
Communications
MM&G Enterprises
Motorola
Movistar
MTS
NDTC
North Central
Telephone
North Dakota
Telephone
North State
Communications
Norvado
Nsight
NU Telecom
Oi TV
Open IPTV
Optimus Clix
Orange
OTEC
Communications
Pace
Panora
Telecommunications
Paul Bunyan
Communications
Pine Island Telephone
Polar Communications
Poplar Bluff Municipal
Utilities
88
01481, 01998
01481, 02586
02401
01481, 01998
01481, 01998
01481, 01998
01481, 01998,
03028
01481, 01998
02378, 01998,
02437, 0858,
02952, 01376
03288
01998
01481, 01998,
03028
02345
Portugal Telecom
Price County
Telephone
Project Mutual
Telephone
PSC
Quality One
Technologies
Qwerty.TV
Randolph Telephone
Readlyn Telephone
Reservation Telephone
River Valley
Telecommunications
S-GO Video
Sagem
Sagemcom
Samsung
Sasktel
ScientiƂc Atlanta
02586
00858
02586
02345, 02586
01998, 03028
03452, 03454
01615
02437
02407
02586
02401, 03454
01481
02586
01481, 01998
02586
01481, 01998
Silver Star
Communications
SingTel
SKY Deutschland
Skyline Cable
SkyPix
Smile Content
Smithville
Sogetel
SureWest
Surry Telephone
SWAT Cooperative
T-Home
Telefonica
Telus
TeNeT
Thomson
TV Northeast
TVB
02401
01481, 01998
01481, 01998
01998
01481, 01998
01898
02586
02586
01998, 02345
01481, 01998
01877
02407, 03288
02407
02407
01998
00858, 02345,
03028
01481, 01998,
03028
01998
02620
02586
01481, 01998
02437
02586
01998
01481, 01998,
02586
02586
01481, 01998,
03028
02132
03288, 03028
03028
01898
03007, 02407
01481, 01998
01615
Twin Valley
Communications
United Telephone
Venture
Communications
Cooperative
Verizon
Viken Fibernett
Vivo
Watch TV
West Carolina
Telephone
Western Wisconsin
Communications
Westphalia Broadband
Wilkes
Telecommunications
Yadkin Valley Telecom
02586
02586
01998
02378
02437
03288
01481, 01998
03028
02586
02586
01481, 01998
02345
„
IPTV PVR Combination
ADB
Altibox
Amino
AT&T
ATMC
Beeline
Belgacom TV
Bell
Bell Aliant
Bell Fibe TV
Bouygues Telecom
BT
Cabovis
CenturyLink
Cisco
ClubInternet
Deutsche Telekom
Du
Echostar
Freebox
i-CAN
Innovative Systems
InviTV
Kiss
KPN
Lumos Networks
Magio Sat
Magnet
Meo
Motorola
02437
02437
01615, 01898
00858
03028
03028
02132
01998
01998
01998
03007
02294
02436
01998
00858, 03028,
02132, 02345,
02378
02132
02132
02401
03452
MTS
Numericable
Oi TV
Orange
Pace
Philips
Portugal Telecom
Sagem
Sagemcom
Samsung
Sasktel
ScientiƂc Atlanta
SKY Deutschland
SureWest
T-Home
Telefonica
Telus
Thomson
Verizon
Vodafone
01976
02437
01898
02437
02132
02952, 02437
01998
02132
01615
02401
02437, 02378,
00858, 01998,
02952, 02401
01998
02436
03452, 03454
02407
02401, 03454
02294
02401
02407, 03288
02436, 02407,
03007
02407
01998
00858, 02345,
02401, 03028
02620
01998
02132
03028, 03288
03028
03007
02378
02401
„
PVR
DirecTV
Humax
Panasonic
Philips
20739
20739
20616
20739
Reference Information
RCN
ReplayTV
Sonic Blue
Sony
TiVo
20739
20616
20616
20636
20739, 20636
89
Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku, OSAKA 541-0041, JAPAN
http://www.onkyo.com/
The Americas
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
For Dealer, Service, Order and all other Business Inquiries:
Tel: 201-785-2600 Fax: 201-785-2650
http://www.us.onkyo.com/
For Product Support Team Only:
1-800-229-1687
Europe
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
Tel: +49-8142-4401-0 Fax: +49-8142-4208-213
http://www.eu.onkyo.com/
Meridien House, Ground floor, 69 - 71 Clarendon Road, Watford, Hertfordshire, WD17 1DS, United Kingdom
Tel: +44 (0)8712-00-19-96 Fax: +44 (0)8712-00-19-95
China
(Hong Kong)
Unit 1033, 10/F, Star House, No 3, Salisbury Road, Tsim Sha Tsui Kowloon, Hong Kong.
Tel: 852-2429-3118 Fax: 852-2428-9039
http://www.hk.onkyo.com/
(Mainland)
1301, 555 Tower, No.555 West NanJing Road, Jing’an District, Shanghai, China 200041,
Tel: 86-21-52131366 Fax: 86-21-52130396
http://www.cn.onkyo.com/
Asia, Oceania, Middle East, Africa
Please contact an Onkyo distributor referring to Onkyo SUPPORT site.
http://www.intl.onkyo.com/support/
The above-mentioned information is subject to change without prior notice.
Visit the Onkyo web site for the latest update.
D1408-0
SN 29401949PDF_EN
(C) Copyright 2014 Onkyo Corporation Japan. All rights reserved.
* 2 9 4 0 1 9 4 9 *
ONKYO~
All the quality of Hi-Fi Component audio ... on the go!
ES-HF300
ES-FC300
On·Eor Headphones
On·Eor Headphones
The audiophile's passton IS
deftned 1n these classiC
closed-back headphones. w1th
40 mm (1•/ .·) t1tamum dnvers
tuned for super-clear treble
and deep. sohd bass.
W1th flat non-tangle elastomer
cable and fofdtng earcups.
portability meets
component-quahty sound 1n a
classy. understated destgn.
••o
~
MD
SII.V£•
'IIOL£T
w.t:~ll
Wide-Range
Titanium
Drivers
Bass-Enhancing
Dual Chambers
Solid
Aluminum
Construction
Detachable
Tangle-Free
Cable
(ES·FC300)
~)
GclcH'Ir;teci
Ccnnecrons
IE-HF300
IE-FC300
In-Ear Headphones
In-Ear Headphones
L1ke you. we're senous about
sound. Get the most from
your mus1c With 14.3 mm
( 9f,n drivers and an
aud1oph1le·grade cable for
super· clear sound.
Balanc•ng deep bass w1th a
clean, deta•led mid-range. these
alum•num earphones come w1th
a bnlham non-tangle cable
des1gned for the da1ly commute.
Gold-Plated
Connections
··~
•
IE-FC300
High Purity 6N Oxygen-Free
Copper Cable
I
=~
-
(ES-HF300)
....
High-Performance
14.3mm (9fl6')
Dynamic
~~~
Drivers
High Purity 6N
Oxygen-Free
Copper
Cable ~..
(IE·HF300)
Rugged
Aluminum
Construction
Coble
Options
r:,.
I
I
Our headphone range is designed to partner Onkyo component systems and any portable media player, so you can cont•nue the Ht·Fi experience when you're on the move Learn more at
Detachable
Tangle-Free
Cable
(IE·FC300)
I
= ~
I
www.us.onkyo.com
Easy Access to
Customer Care
Share your impressions, get product support,
and keep up to date with the latest Onkyo
developments via our social network serv1ces.
11
You(g
Product Registration:
Support Forum:
Twitter:
Facebook:
YouTube:
http://www.us.onkyo.com/portfolio_choose.cfm
http.//for·ums.onkyousa.com/
@Onkyo_USA
Onkyo USA
OnkyoUS
onkyo
lllnl n1Ul ~~~ II~ Ill~ IIIII~~ I ~ II~
Z9lt016Z
usA website: http://www.us.onkyo.com
SN29380162
FRONT
FRONT
FRONT
FRONT
LEFT
FRONT
-----FRONT
RIGHT
LEFT
LEFT
LEFT
1
RIGHT
-..
- FRONT
--
RIGHT
2
FRONT
RIGHT
SURROUND
SURROUND
SURROUND
SURROUND
SURROUND
SURROUND
LEFT
LEFT
RIGHT
LEFT
LEFT
RIGHT
3
FRONT HIGH ; ;
LEFT
··
.....................
FRONT HIGH ::
LEFT
::
.....................
; FRONT HIGH ;
..· ...................
............LEFT:
.........
: FRONT HIGH :
:....................
LEFT .:
SURROUND BACK
RIGHT
SURROUND BACK
RIGHT
SURROUND BACK
RIGHT
SURROUND BACK
RIGHT
SP-8/ZONE 2
SP-8/ ZONE 2
SP-8 / ZONE 2
SP-8/ ZONE 2
SP-8/ZONE 2
RIGHT
SP-8/ZONE 2
RIGHT
SP-8/ZONE 2
RIGHT
SP-8/.ZONE 2
RIGHT
LEFT
LEFT
LEFT
LEFT
SN 29390881
For Customers Using an RIHD-compatible TV, Player, or Recorder
This unit allows interoperability of the CEC (Consumer Electronics Control) specified in the HDMI standard, which is known
as RIHD. Various linked operations can be performed by connecting this unit to an RIHD-compatible TV, player, or recorder.
Initial setting is set to off, so it is required to change the setting to on.
For the details of connection, function and operation, refer to "Using an RIHD-compatible TV, Player, or Recorder" in the
operating instructions, and perform the settings accordingly.
Pour les utilisateurs d'un televiseur, d'un lecteur ou d'un enregistreur compatible
RIHD
Cet appareil autorise l'interoperabilite du CEC (Consumer Electronics Control) specifie par Ia norme HDMI, connue sous le
nom RIHD. De nombreuses operations liees peuvent etre realisees en raccordant cet appareil a un televiseur, un lecteur ou un
enregistreur compatible RIHD.
Comme le reglage initial est desactive, vous devez l'activer.
Pour Ia connexion, le fonctionnement et !'utilisation detailles, consultez «Utilisation d'un televiseur, d'un lecteur ou d'un
enregistreur compatible RIHD >>dans le mode d'emploi et procedez aux reglages appropries.
Para clientes que utilizan un televisor, reproductor o grabador compatible con RIHD
Esta unidad permite Ia interoperabilidad del CEC (Consumer Electronics Control, control de equipo electr6nico) especificado
en el estandar HDMI, conocido como RIHD. Es posible realizar varias operaciones combinadas conectando esta unidad a un
televisor, reproductor o grabador compatible con RIHD.
El ajuste inicial esta establecido en Off (apagado), de manera que es necesario cambiar el ajuste a On (encendido).
Consulte los detalles de conexi6n, funci6n y operaci6n, en "Uso de un televisor, reproductor o grabador compatible con
RIHD" en las instruciones de operaci6n, y realice los ajustes como corresponda.
Peri clienti che utilizzano una TV, un lettore o un registratore compatibili con RIHD
Questa unita consente l'interoperabilita del CEC (Controllo Elettronica Consumatore) specificato nello standard HDMI, noto
come RIHD. Collegando questa unita a una TV, lettore o registratore compatibili con RIHD, e possibile effettuare varie
operazioni collegate.
L'impostazione iniziale e su off, ed e necessario metterla su on.
Per informazioni sui collegamento, funzionamento e utilizzo, far riferimento a "Uso di una TV, lettore o registratore
compatibili con RIHD" nelle istruzioni d'uso, ed eseguire le impostazioni seguendo le istruzioni.
Verwendung eines RIHD-kompatiblen Fernsehers, Players oder Recorders
Dieses Gerat ermoglicht eine lnteroperabilitat der CEC (Consumer Electronics Controi/Steuerung Unterhaltungselektronik),
die im HDMI -Standard spezifiziert wird, der als RIHD bekannt ist. Es konnen verschiedene verkniipfte Operation en ausgefiihrt
werden, indem dieses Gerat an einen RIHD-kompatiblen Femseher, Player oder Recorder angeschlossen wird.
Die urspriingliche Einstellung steht auf ,aus". Man muss also die Einstellungen auf ,ein" stellen.
Einzelheiten zum Anschluss, Funktion und Betrieb finden Sie auf ,Verwendung eines RIHD-kompatiblen Fernsehers,
Players oder Recorders" in der Betriebsanleitung. Fiihren Sie die Einstellungen entsprechend aus.
Voor klanten die een RIHD-compatibele TV, speler of recorder gebruiken
Deze unit laat interactiviteit toe van de CEC (Consumer Electronics Control) gespecificeerd in de HDMI-norm, die bekend
staat als RIHD. Verschillende gekoppelde bedieningen kunnen worden uitgevoerd door deze unit aan te sluiten op een RIHDcompatibele TV, speler of recorder.
De oorspronkelijke configuratie staat op Af, zodat ze moet worden gewijzigd naar Aan.
Voor details over de aansluiting, functie en bediening, raadpleeg de "Een RIHD-compatibele TV, speler of recorder
gebruiken" in de bedieningshandleiding, en voer de instellingen overeenkomstig uit.
Galler kunder rned en en RIHD-kornpatibel TV, spelare eller brannare
Denna enhet tillater interoperabilitet med CEC (Consumer Electronics Control) som ar specificerad i HDMI-standarden, som
kallas RlHD. Olika lankade manovrar kan utfOras genom att ansluta denna enhet till en RIHD-kompatibel TV, spelare eller
briinnare.
Initial installning ar av sa den maste andras till pa.
For detaljerad information om anslutning, funktion och handhavande, se "Att anviinda en RIND-kompatibel TV, spelare
eller briinnare" i bruksanvisningarna och utfOr instiillningarna darefter.
HHfllopMaQHH ;:J;JIH noJib30BaTeJieii, ucnoJib3YJOI.U,HX TeJieBH30pbi, nJieepbi u
JanuchiBaJOI.U,He ycTpoiicTBa c noJUJ:ep~Koii RIHD
,[(aHHOe yCTpoikTBO no,~:~,~:~epiKHBaeT CEC (npOTOKOJI ,L\HCTaHUHOHHOro ynpasneHHll), yKa3aHHhlH B cTaH,L\apTe HDMI,
H3BeCTHhiH non Ha3samreM RIHD. flp11 rro,~:~KJHO'leHHH naHHOro ycTpoficTsa K TeneBH3opy, nneepy HnH JanHCbiBaiOIUeMy
yCTpOHCTBY c rroMepiKKOH RIHD cTaHOBllTCll nocTynHbJ pa3nH'lHbJe onepaum1.
IIepBOHa'laJibHO ,t~aHHall tPYHKUHll OTKJliO'leHa, U03TOMY ee He06XO,lllfMO 6y,t~eT BKJllO'llfTb.
ilO.Ilp06Hhie CBe,t~eHHll 0 UO,liKJIIO'leHHH, tPYHKUHJlX H pa6oTe CM. B pa3,t~ene "lfcnO,'Jb30B8HHe TeJJeBH30pa, UJJeepa HJJH
JanHCbiBaiOmero yCTpoifCTBa c noMepJKKoif RIHD" HHCTPYKUHH rro 3KCrrJiyaTaUHH, r,~:~e TaK)f(e orr11caHa rrpoue,~:~ypa
HaCTpOHK\1.
Para Clientes que Utilizern urn Televisor, urn Leitor ou urn Gravador Cornpativel
cornRIHD
Esta unidade permite a interoperabilidade do CEC (Consumer Electronics Control - Controlo de Equipamentos de Eletr6nica
de Consumo) especificado na norma HDMI, e que e conhecida como RIHD. E possfvel efetuar varias opera~oes combinadas
ligando esta unidade a urn televisor, leitor ou gravador compativel com RIHD.
A defini~ao inicial esta configurada como desativada, pelo que e necessaria ativar a defini ~ao.
Para obter mais informa~oes sobre a liga~ao, fun~oes e funcionamento, consulte "Utilizar urn Televisor, urn Leitor ou urn
Gravador Compativel com RIHD" nas instru~oes de funcionamento e efetue as definir,:oes de modo adequado.
'
~Jf.Lfj~·-fieffl RIHD *~~~~~ ~~-~~~~-lr-J:j:p
Jlt~'i~UJi!f:!tW HDMI ~$ ( ep RIHD) tfJt~JE CEC ( il'f'lff!t=ft@i!iU~'ii) 8"71lJ3\H'Ftt
m~~ffiJl
, tlti~~g~G~~~ · epijg~fi?bJJi:il~~f'F
o
~~Jl:t~'ii:ii~!U RII-ID
0
)Jj(~~~'ii~~M · I?SIJ1t£,~JilmJl:t~'iiJ!c~~~m~
tlD$~~' J}Jijg:f[)~f'FB"J~f:*'IO{g,~, • ~fi~!m~f'Ft~~tpB"J r ~Jfl RIHD *13~~~' :JI~ti§Xi~~f~J
0
~J:ttp~H}'J~f'J~i[
mfflr1fffl RIHD
• ~f&
o
~1£~f~, tlinl:~§XW:i!iiJ~B~~p
ll:t~J! 3cJ~ :(£ HDMI
t;FficpHi'J:EEr-:1 CEC O~~tt~-=f~jfjti) ~1* 1ttt. f~~ RIHD . PJJ.mjj:Ji~rl:t~'i!f.iiJ RIHD
•w~~.mau~~~-*~tr~#~~-~0
w~~~~ * ~· ~~g~~~~~~*@ ·
Ji~.~OO®m<~Er-JW~mB. ~~~-~mmcrEr-J"~ fflRI~R3~~,M~H~~~H" *~AAm ~~
it~Ji .
RIHD
c:§J~'Ii 0) ® :Q 7
1..11::::·-r-> :1 l.l- "\7- I l.l ::J - $7'- ~ t:::ifm li: 1d: :Q JJ"
HOM I xJHac:l:E:Iib S:tl C:l 1.@ CEC (Consumer Electronics Control) ~ffffl G/.::JjiJ.JiJJ1'F~11'5 L. C:_b' c
RIHD C:._il'ffvcl 1a;:g- a :$:~~ RIHD C:._§::Wi•l1:0)i!B.@ 7' IA::::'t>-::/'LJ--\7-, L;::::J-::9·-I ~ .I~Hm GC:<l:)f.lel 11 ~1d:.@C:._,
:$:~/ct.
~,
~.., 101.., 10tJ:IJ Y71*1'Fb'c~a;:g- o
:'fJJJ'iJl~9::l:E:Id:::t71 ~ tcr ::J C:<l:) 0 a;:g-O)c, ::tY I ~~9::l:E:~~~90tf:\~b'® IJ a;:g-o
~tmt>iJ.JfF, i*fF7J5~ ( ~:J l., I C:O) ~**illld:. IlS(j:.&~BJ3ei I RIHD C:_ §:}~'l'iO)CiB.@:T
ffl l ~ tcr.@ l ~ l d: J ~L:'J[ I ~ tcro, ~:l:E:~ L C: <ic cllo
u t:::'t> -::J u -
"\7- I
LJ ::::J -5·-~ cf.le
Y1307-4
SN 29355782C
1111111111111111111111111111111111111111111111111111111
* 2 9 3 5 5 7 8 2 c *
ONKYO
Y1401-1
11111111111111111111111111111111111111111111111111
.29401783.
Precautions
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECfRIC SHOCK.
DO Nar EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE.
I,
2.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERV ICEABLE
PARTS INSIDE. REFER SERV ICING TO QUALIFIED
3,
SERV IC E PERSONN EL
/A ~ARNT~~~~~ AVIS. " "
~ 'Mil AM1! · ~
Lt.
The lightning n ash with arrowhead symbol. within an
cq ui i:-Hcral tria~glc. is in tended to alcn.the use.· r 10 the
4.
presence of umnsul ated "dangerous voltage" withi11
the product'senclosurethatmaybcofsutliciCnl
magnitude to constitute a risk of c leetne shock to
pe rsons
Lh
•
The ex.clamation point w.ithin an.'q. uilat. era! triang le is
mtended 10 alert the user to the presence of important
and maintenance (servtcmg) mstructions in
the literature aceompanymg the appliance.
oper.~ung
Important Safety Instructions
2.
3.
4.
tnpod bracket, or table
specified by the manufacturer,
or sold wnh the apparatus
13.
14.
15.
16.
17.
IS.
For models with {POWER] button, or with both
!POWER[ and !ON/STANDBY] buttons:
Pressing the {POWER] buuon to select OFF mode
does not fu lly disconnect from the mains. If you do not
intend to use the unit for an extended period, remove
the power cord from the AC outlet.
5.
6.
7.
~
When a cart 1s used use
cdutJon when movmg the cart/
53 1 2 ~.._
apparatus combination to
avoid injury from tip-over.
Unplug this apparatus during lightning stornts or when
unused for long periods of time.
Refer all servicing to qualified service personne l.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been
exposed to rain or moisture. docs not operate normall y,
or has been dropped.
Damage Requiring Service
Unplug the apparatus from the wall outlet and refer
serv icing to qualified service personnel under the
following condition~:
A. When the power-supply cord or plug is damaged,
8. If liquid has been spilled. or objects have fa llen
into the appamtus.
C. If the apparatus has been exposed to rain or water.
D. If the apparatus does not operate normally by
followin g the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
control s may result in damage and will o ft en
requ ire extensive work by a qualil1ed technician to
restore the apparatus to its nonnal operation.
E. If the apparatus has been dropped or damaged in
any way. and
F. When the apparatus exhibits a dis tinct change in
performance th is indicates a need for service .
Object and Liquid Entry
Never push objects of any kind into the apparatus
through openings as they may touch dangerous voltage
points or short-out pans that could result in a fire or
electric shock.
The appanttus shall not be exposed to dripping or
splashi ng and no objects filled with liquids. such as
vases shall be placed on the apparatus.
Don't put candles or other burning objects on top of this
unit.
Batteries
Always consider the environmental issues and follow
local regulations when disposing of batteries.
If yo u install the apparatus in a built-in installation,
such as a bookcase or rack, ensure that there is adequate
ventilati on.
Leave 20 em (8") of free space at the top and sides and
10 em ( 4 ") at the rear. The rear edge of the shelf or
board above the apparatus shall be set 10 e m (4") away
fro m the rear panel or wall, creating a flue-like gap for
wam1 air to escape.
8.
For models with ION/STANDBY[ button only:
Pressing the {ON/STANDBY] buuon to select Standby
mode does not full y disconnect from the mains. If you
do not intend to use the unit for an extended period,
remove the power cord from the AC outlet.
Preventing Hearing Loss
Caution
Excessive sound pressure from earphones and
headpho nes can cause hearing loss.
Batteries and Heal Exposure
Warning
Baueries (bauery pack or baucries installed) shall not
be exposed to excessive heat as sunshine, fire or the
like.
Never Touch this Unit with Wet Hands-Never
handle this unit or its power cord while your hands arc
wet or damp. If water or any other liquid gets inside this
unit. have it checked by your Onkyo dealer.
Handling Noles
If you need to tmnsport this unit, use the original
packaging to pack it how it was when you originally
bought it.
Do not leave rubber or plastic items on thi s unit for a
long time, because they may leave marks on the case.
Thi s unit's top and rear panels may get warm a fter
prolonged use. This is nonnal.
If you do not use this unit for a long time, it may not
work properl y the next time you turn it on, so be sure
to use it occasionally.
NOTE:
CAN ICES-3 B/NMB-3 B
For models having a power cord with a polarized plug:
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WTDE SLOT. FULLY
INSERT.
NOTE'
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates. uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions. may cau ~e hannful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause hannful
interference to radio or televi sion reception, which can be
determined by turning the equipme nt off and on. the user is
encouraged to try to correct the interference by one or more
of the followin g measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radioffV technician
for help.
This device complies with Indu stry Canada lice nce-exempt
RSS standard(s). Operation is subject to the fOllowing two
conditions: ( I) this device may not cause interference. and
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
ATTENTION:
Precautions
1.
2.
3.
AFIN D'EVITER TOUT DANGER DE DECHARGE
ELECTRIQUE. NE PAS OUVRIR LE BOITIER (OU
L' ARRIERE) DEL' APPAREIL CONFIER TOUT
TRAVAIL D"ENTRETIEN OU DE REPARATION A UN
TECHNICIEN QUALIFIE.
4.
Lh
Lh
Enregistrement et droiiS d'auleur-Outre pour
]'utilisation privCc, tout enregistrement d'reu vres
protegees par des droits d'auteur est interdit sans
I' accord prCala ble du dCtenteur de ces droits.
Fusible-Le fusible l'intCrieur du appareil ne peut
pas Ctre remplace par rutilisateur. Si vous n'arrivez pas
mellre l'apparcil sous tension, adrcssez-vous votre
revendeur Onkyo.
Entretien-Essuyez n!gulierement le boltier de
l'appareil avec un chiffon doux et sec. Vous pouvez
Climiner les taches rebelles avec un chiffon ICgerement
imbibe d'eau ct de dCtcrgent doux . Essuycz ensuite
l'appareil avec un chiffon propre et sec. N' utilisez
jamais de chiffons rCchcs, de dissol vant. d'alcool ou
d ' autres solvants chimiques car ceux-ci pourraient
endommager Ia finition ou faire disparaitre Ia
sCrig raphie du boltier.
Alimentation
a
a
DANGER:
a
AVERTISSEMENT
Unsymboled' CclairflCchCdansunlriangletquilato!ral
estdcslinClialtirerl'allentiunde l'milisaleursur lefait
quecertainsorganesintemesnon-isolesdc l"appareil
sontlntversCs paruncourant o!lectriqueassez
dangereux pourconstituerun resqued 'ilectrocution
LISEZ LES CONS IGNES SUIV ANTES AVANT DE
BRANCHER L ' APPAREIL AU SECTEUR POUR LA
PREMIERE FOIS.
La tension du sect cur change selon le pays. Verifiez que
Ia tension du secteur dans votre rCg ion correspond aux
caractCristiques Clectriqucs figurant en face arrierc de
l'appareil (CA 230 V. 50 Hz ou CA 120 V, 60Hz, par
exemple).
U" .poin.t d' exclamalion dans un triangle CquilalCral
estdestinCilauircrl'auenliondel'utihsateursurdes
instructlons importantes relativesil l'entretieneta
l'utilisationduproduit
Remarques importantes pour
votre securite
Pour dCbrancher !' unite du secteur, veuillez
dCconnecter le cordon d ' alimentation. Songez faire le
nCcessaire pour que Ia fiche du cordon soit accessible a
a
1.
Veuillez lire ces instructions.
Vcuillcz conserver ces instructions.
3. Respectez tousles avertissements.
4. Suivez toutes les instructions.
5. Ne vous servez pas de cct appareil proximitC d'eau .
6. Essuyez le boitier avec un chiffon sec uniquemem.
7. Ne bloqucz pas les orifices d'aCration. lnstallez cet
appareil e n suivant les instructions du fabricant .
8. Ne le placcz pas proximitC de sources de chaleur telles
que radiateurs, chauffage, poeles ou autre dispositif (y
compris les amplificatcurs) gCnCrateur de chaleur.
9. N'essayez pas de circonven ir le dispositif de securitC
que reprCsente une fiche polarisCe ou une fiche avec
mise a Ia terre. Une fiche polaris& dispose de deux
lames dont l'une est plus large que I' autre. Une fiche
avec terre est munie de deux lames ainsi que d'unc
broche de mise i'l Ia terre. La lame Ia plus large ou Ia
broche assurent votre sCcuritC. Si Ia fiche foumie ne
peut Ctre insCrCe dans Ia prise murale, dcmandez un
Clectriden de remplacer Ia prise.
10. ProtCgcz lc cordon d'alimentation e n Cvitant qu'on ne
2.
Pour les modelcs dotCs du bouton I POWER[, ou dotes
a Ia foi s du bouton {POWER] et du bouton ION/
a
STANDBY] ,
Presser le bouton {POWER] pour sClectionner le mode
OFF ne permet de se dCconnecter du secte ur. Si vo us
n'avcz pas !'intention d'utiliser l'apparcil pendant unc
periode prolongee. dCbranchez le cordon d' alimentation
de laprisemuralc.
a
a
11,
12.
13.
14.
marche pas dessus et qu'il ne soit pliC (notammem au
ni veau des fiches, des cache-diblcs et de Ia sortie de
J'appareil).
Servcz-vous exclusivement des fixation s/accessoires
prCconises par lc fabricant.
Utilisez exclusivcment le
AVEATISSEMENTPOUR
SUPPOFITS A ROULETTES
chariot. le suppon,le trCpied,
Ia fixation ou Ia table
sp&:ifiC(e) par le fab ricant ou
vcndu(c) avec l'apparcil. Un
chariot con tenant l'appareil
doit toujours Ctre dCplace
avec precaution pour evitcr
qu'il nc sc renvcrsc et blcsse
quelqu'un.
DCbranchez l'appareil durant un orage ou lorsqu'il reste
inutilisC longtemps.
Veuillcz faire appcl un technicien qualifiC pour
l'entretien. Un entretien est indispensable si l'appareil a
Cte endommagC d ' une fw;:on ou d'une autre: cordon
d'alimentation ou fiche cndommagee, Jiquide rcnvcrse
ou chute de petits objets dans I' appareil. exposition Ia
pluie ou une humiditC excessive, fonctionnement
anormal ou chute de l'appareil.
Dommages nCcessitant reparation
DCbranchez I' appareil du secteur et confi ez-le un
techniden qualifiC lorsque:
A. Le cordon d'alimentation ou sa fiche sont
cndommagCs.
B. Des objets sont tombCs dans l'appareil ou d u
liquide a CtC renversC eta penCtrC ce demier.
C. L'appareil a ere expose Ia pluie.
D. L' appareil ne semble pas fonctionner normale mem
lorsquc vous J'utiliscz en respcctant les
instructions donnees. N'effectuez que les rCglages
pr€conises dans le manuel car un mauvais r€glage
d' autres commandcs risque d 'cndommager
l'appareil et nCcessitera un long travail de remise
en Ctat par un technicien qualifie.
E. L'appareil est tom be ou son boitierest
endommagC.
F. Ses perfonnances scmblent affectCes.
Penetration de corps Ctrangers et de liquide
Veillez ne pas inserer d'objets \'intCrieur de
l'appareil car ils pourraicnt toucher des points de
tension dangereux ou provoquer des court-circuits : il y
a risque d'incendie ou d'Cicctrocution.
Veillez ne j amais exposer l' appareil des gouttes ou
des jets d'eau. Ne dCposez aucun objet contenant un
liquide (un vase, par exe mple) sur J'a pparcil.
Ne dCposez pas de bougies ou d'autres objets bn11ants
sur cette appareil.
Piles
Songez l'environncmcnt et veille:r. des lors respecter
lcs consignes officicllcs pour Ia liquidation de piles
CpuisCcs.
Vcillez n'installer cet appareil que dans un rack ou un
meuble qui n'entmve p:1s Ia ventilation.
-
a
a
a
15.
a
a
16.
a
a
This tmnsmiuer must not be co-located or operated in
conjunction with any other antenna or transmitter.
RF Exposure Compliance
Thi s e<]Uipment complies with FCC/IC radiation exposure
limits set forth for an uncontrolled environment and meets
the FCC radio frequency (RF) Exposure Guidelines in
Supplement C to OET65 and RSS- 102 of the IC radio
frequency (RF) Exposure rules. This equipment has very
low levels of RF energy that it deemed to comply without
maximum permissive exposure eval uation (MPE).
a
AFIN DE REDUIRE LES RISQUES D'INCENDIE ET DE
DECHARGE ELECTRIQUE. NE PAS EXPOSER CET
APPAREIL A LA PLUIE OU A L' HUM IDITE
For U.S. models
FCC Information for User
CAUTION,
The user changes or modifications not expressly approved
by the party responsible for compliance could void the
user's authority to operate the equipment.
Laissez un espace libre de 20 em au-dcssus et cOtC de
l' apparcil ainsi que 10 e m e n face arriere. La face
arrieredu rack ou du meuble doit se trouver IOcm ou
plus du mur pour assurer une aeration adequate en vue
de dissiper Ia chaleur.
For Canadian Models
The power cord plug is used to disconnect this unit
from the AC power source. Make sure that the plug is
readily operable (easi ly accessible) at all times.
1.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
5. Do not use thi s apparatus near water.
6. Clean only with dry cloth.
7. Do not block any vemilation openings. Install in
accordance with the manufacturer's instructions.
8. Do not install near any heal sources such as radiators,
heat registers, stoves, or other ap paratus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
groundi ng-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety . If
the provided plug does not fit imo your oUilet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs. convenience receptacles.
and the point where they exit from the apparatus.
II. Only use attachments/accessories specified by the
manufacturer.
12. U!<.e only With the Cart, Stand,
PORTABLE CAATWAilN ING
Recording Copyright-Unless it's for personal use
only, recording copyrighted material is illegal without
the permission of the copyright holder.
AC Fuse--The AC fuse inside the unit is not userserviceable. If you cannot turn on the unit. contact your
Onkyo dealer.
Care-Occasionally you should dust the unit all over
with a soft cloth. For stubborn stains, use a soft cloth
dampened with a weak solution of mild detergent and
water. Dry the unit immediatel y afteiWards with a clean
cloth. Don't use abrasive cloths. thinners. alcohol. or
other chemical solvents, because they may damage the
finish or remove the panel lettering.
Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE
FIRST TIME, READ THE FOLLOWING SECfiON
CAREFULLY.
AC outlet voltages va ry from country to country. Make
sure that the voltage in your area meets the voltage
requirements printed on the unit's rear panel (e.g., AC
230 V, 50 Hz or AC 120 V, 60Hz).
a
But it is desirable that it should be installed and operated
keeping the radiator at least 20 em or more away from
person' s body (excluding extrem ities: hands, wrists, feet and
ankles).
17.
a
18.
a
a
a
a
Pour les modeles dotes uniquement du bouton l ON/
STANDBY]'
5.
6.
7.
Presser le bouton ION/STANDBY] pour selectionner
le mode vcillc ne pcnnet de sc d&onncctcr du sccteur.
Si vous n'avez pas !'intention d'utiliser l'appareil
pendant une pCriode prolongee, dCbranchez le cordon
d'alimentation de Ia prise muralc.
Prevention de Ia perte d'acuitC auditive
Prudence
Une pression sonore excessive provenant d'oreillettes
ou d ' un casque peut entrainer une perte d'acuite
auditive.
Piles el exposition 8 Ia chaleur
Avertisscmcnl
Evitcz d'exposcr lcs piles (dans leur cmballage ou
instal ICes dans un appareil) a une chaleur excessive (en
plcin solei I, pres d ' un feu etc.).
Ne touchcz jamais cet appareil avec des mains
mouillCes-Nc manipulezjamais cct apparcil ou son
cordon d'alimentation avec des mains mouiiiCes ou
humides . Side l'eau ou tout autre liquide penetre
l'intCrieur de l'appareil, faites-le vCrificr par votre
rcvendcur On kyo.
Remarques concernant Ia manipulation
Si vous de vez transporler cet appareil. servez-vous
de l'emballage d'origine pour l'emballer comme il
I'Ctait lors de son acquisition.
Ne poscz pas d'objets en caoutchouc ou en plastique
demeure sur cct apparcil car ils risquent de Jaisser
des marques sur le boitier.
Les panneaux superieur et latCraux de l'appareil
peuvcnt devenir chauds aprCs un usage prolongC.
C'est parfaitement normal .
Si vous n"utilisez pas l'apparei l durant une pCriode
asscz longue. il risque de ne pas fonctionner
convenablemcnt Ia prochainc mise sous tension;
veillez done l'utili ser de temps en te mps.
a
8.
a
a
a
Pour les modeles des Etats-Unis
lnrormalion FCC pour I'Utilisateur
PRUDENCE'
Les changements ou les modifications de l' utilisateur qui ne
sont pas cxplicitement approuvCs par Ia partie responsable
de Ia conformite aux normes pourraient mellre fin au droit
de l'utilisateur d'utiliser le materiel.
REMARQUE'
Cct appareil a CtC teste ct s'cst averc contOnne aux limites
pour les appareils numCriques de catCgorie B, en vertu des
tegles de Ia Partie 15 de Ia FCC Ces limites sont con!Yues
pour fournir une protection raisonnable contre le brouillage
prCjudiciable d ' une installation residenticlle.
Cet appareil produit, utilise et peut rayo nncr de I' Cnergie de
frCquence radio ct, s'il n'cst pas instaliC ni utilise
conformCment aux instructions, peut causer du brouillage
prejudiciable aux communications radios. Toutefois, il n 'est
pas garanti qu'aucun brouillagc prCjudiciable puisse se
produire dans une situation paniculiere. Si l'appareil produit
du brouillage plijudiciable Ia reception radio ou
teiCvisuelle. ce qui peut etre determine en mettant l'appareil
sous tension ct hors tension, l'utilisatcur devrait essayer
d'Climiner le brouillagc en prenant l'unc ou plusicurs des
mesures sui vantes :
• Reorienter ou dCplacer l'antcnne de reception.
• Augmcnter l'espace entre l'appareil etle rCcepteur.
• Brancher l'apparei l dans Ia prise d'un circuit different de
celui du rtcepteur.
• Consulter le distributcur ou un technicien d 'experience en
radio et tCICvision pour obtenir de I' aide.
a
Le present appareil est confonne aux CNR d'lndumic
Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisee aux deux conditions suivantes:
(I) l'apparcil ne doit pas produire de brouillage, et (2)
l' utilisateur de l' appareil doit accepter tout brouillage
radioClcctrique subi, meme si le brouillage est susceptible
d'en compromettre le fonctionnement.
Cet emetteur ne doit pas Ctre place a de ou utilise
conjointement avec une autre amen ne ou un autre emeueur.
Conformite a I' exposition aux RF
Cet equipcment est conforme aux limites d'exposition aux
rayonnements CnoncCes pour un environnement non
contr61e et respecte les rCgles les radioClectriques (RF) de Ia
FCC Jignes directrices d'cxposition dans Je Supplement C a
OET65 et d 'exposition aux frCquences radioClcctriques (Rfl
CNR- 102 de I' IC. Cet Cquipcment emet une Cnergie RFtres
faible qui est considCrCe conforme sans evaluation de
!' exposition maxi male autorisCe.
Cependant, CCI Cquipcment doit etre install€ et utilisC en
gardant une distance de 20 em ou plus entre le dispositif
rayonnant etle corps (il !'exception des extrCmitCs: mains,
poignets, pieds et chevilles).
Modele pour les Canadien
REMARQUE'
CAN ICES-3 BINMB-3 B
Sur les modCles dom Ia fiche est polarisee :
cualificado para devol ver el aparato a su
funcionamiento normal.
El aparato haya cafdo o haya sufrido otros daiios,
y.
F. El aparato parezca no funcionar normal mente,
indicando que necesita reparaci6n.
16. lntroducci6n de objetos s61idos y lfquidos
No introduzca nunca ninglin objeto a travCs de las
abenu ras del aparato, ya que podrfan tocar puntos de
tensi6n pcligrosa o cortocircuitar panes, Jo que
resultarfa en un incendio o descargas e lCctricas.
El equipo no se deberia exponer a gotas ni a
salpicaduras y nunca deberfa colocar objetos que
contengan lfquidos, como los tlorcros, encima de Cste.
No coloque velas ni otros objetos incandescentes
encima de Ia unidad.
17. Baterfas
Tenga en cuenta los aspectos ambientales y siga las
regulaciones locales a Ia hora de desechar las baterfas.
18. Si instal a el aparato en una instalaci6n empotrada,
como en una estantcrfa o en una librerfa, aseglirese de
que estC bien ventilado.
Deje 20 em de espacio libre por encima y por los !ados
y lOcm en Ia parte posterior. El borde posterior del
estante o e ltablero de encima del aparato deberfa estar a
unos 10 em del panel posterior ode Ia pared, de fonna
que deje un espacio libre para que el aire caliente pucda
circular.
E.
Precauciones
LARGE DE LA FICHE DANS LA BORNE
CORRESPOND ANTE DE LA PRISE ET POUSSER
1.
JUSQU' AU FOND.
PARA REDUCJR EL RIESGO DE JNCEND JOS 0 DE
DESCARGAS ELEcTRJCAS, NO EXPONGA ESTE
APARATOA LA LLUVJA Nl A LA HUMEDAD.
PRECAUCION:
2.
3.
PARA REDUCIR EL RIESGO DE DESCARGAS
ELECTRICAS, NO QUITE LA CUBIERTA (0 PANEL
POSTERIOR). EN SU INTERIOR NO EXISTE N INGUNA
PIEZA QUE PUEDA REPARAR EL USUARIO. EN CASO
DE AVERlA, SOLICITE LOS SERYICIOS DE PERSONAL
DE REPARACI6N CUALIFICADO.
4.
Ji\
~
Lh
I.
2.
El simbolo de rayo eon eabeza de lleeha, inscrito en
untrillilguloequihitero,tieoela finalidaddeavisaral
usuario Ia presencia de "'tensiones peligrosas" no
aisladasdcntro de la caja del producto que son de
magnitud suficiente como para eonstituir un riesgo de
de.~argasel~etricasa personas
El signo de exclamaci6n, inscrito en un trid ngulo
equihite._ro, ti~ne Ia finalidad de av.isar al usuario Ia
presenCia de mstrucciones imponamcs de operatiOn y
mamemmicnto(rcparaci6n)enla htcraturaque
acompaiiaaesteproducto
8.
9.
10.
11.
12.
13.
14.
15.
Lea estas instrucciones.
Guarde estas instrucciones.
Tenga en cuenta todas las advertencias.
Siga todas las instrucciones.
No use este apa rato cerca del agua.
Umpielo Unicamente con un paf\o seco.
No bloquce los orificios de vcntilaci6n. lnst<ile lo
siguiendo las instrucciones del fabricame.
No lo instale cerca de radiadores, aparatos de
calefacci6n, estufas ni ning(in tipo de aparatos
(incluyendo amplificadorcs) que generen calor.
Tenga en cuenta los fines de seguridad de los
conectores con derivaci6n amasa y I o polarizados. Los
conectores polarizados tienen dos contactos, uno de
mayor tamai'io que el otro. Un coneclOr con derivaci6n
a rnasa tiene dos contactos con un tercero para derivar a
masa. El contac to ancho o e l tercer contacto se instalan
con fines de seguridad. Si cl conector del equipo no
e ncaja en Ia torna de corriente disponible, acuda a un
tCcnico clcctricista cualificado para que le substituya Ia
toma obsoleta.
Evite que e l cable de alimentaci6n pueda ser pisado o
atrapado, en especial en los conectores, y en los puntas
en que sale delaparato.
Use s61o los accesorios I conex iones especificados por
e l fabrieante.
Use s61o el sopone, trfpode.
AOYERTENCIAPIIo RACARRITOS
abrazadera o mesa indicados
por el fabricante, o vendidos
junto con eJ aparato. Si utiliza
una mesilla con ruedas, tenga
cuidado, a! desplazar el
conjunto de mesilla I aparato,
ya que si se vuelca podria
recibirlesioncs.
Desconecte cste apamto si hay tonnenta o cuando no
vaya a ser utilizado por largos perfodos de tiempo.
Deje que el mantenimiento lo lleve a cabo personal
cualificado. Es necesario reparar el apantto cuando ha
recibido algtln tipo de dai'io, como por ejemplo si el
cable de alimentaci6n ha sufrido daiios, si se ha
derramado alglin lfquido en el interior del aparato o si
Cste ha {juedado expuesto a Ia lluvia o humedad y no
funciona normalmente o si ha cafdo al suelo.
Daiios que requieren reparaci6n
Desenchufe el aparato y solicite los servicios de
personal cualilicado cuando:
A. El cable de alimentaci6n o e l enchufe est~ dai'iado.
B. En e l interior del aparato hayan entrada objetos
s6lidos. o lfquidos.
C. El aparato haya estado ex pues.w a Ia lluvia o al
agua.
0. El aparato parczca no fu ncionar adecuadamente
aunque se sigan las instrucciones de operaci6n.
Ajuste solamente los controles indicados e n e l
manual de instrucciones, ya que un ajuste
inadecuado podrfa resuhar en daiios, y podrfa
requerir cl trabajo laborioso de un tCcnico
•
Copyright de las grabaciones-A menos que sc
uti lice de forma exclusivamente personal, Ia grabaci6n
de material sujeto a copyright es ilegal si n cl permiso
del propietario del copyright.
Fusible de CA-E! fusible de CAse encuentra en el
interior de Ia unidad y noes un elememo accesible a!
usuario. Si todavfa no puede activar Ia unidad, p6ngase
en contacto con su distribuidor Onkyo.
Mantenimiento-De vez en cuando limpie esta unidad
con un paiio suave. Para Ia suciedad m:is diffcil de
eliminar, use un paiio suave ligeramente humedecido
con una soluci6n de agua y detergeme suave. A
continuaci6n, scque Ia unidad inmediatamente con un
paiio limpio. No use paiios abrasivos, alcohol, ni
disolvemes qufmicos de ningtln tipo ya que con ellos
podrfa daiiar el acabado de Ia unidad e incluso borrar Ia
scrigraffa del panel.
Alimentaci6n
ATENCION
ANTES DECONECTAR LA UNIDAD POR
PRIMERA VEZ, LEA CON ATENCJ6N LA
SECCI6N SIGUIENTE.
Los voltajes de las lomas de CA varian para cada pais.
Compruebe que el voltaje de su zona cumpla con los
requisitos de vohaje indicados en Ia etiqueta de
caracterfsticas que se encuentra en el panel posterior de
esta unidad (porejemplo, AC 230 V, 50 Hzo AC
120 V, 60Hz).
lnstrucciones de seguridad
importantes
3.
4.
5.
6.
7.
.,
,....,_,.
El cable de alimentaci6n sc utiliza para desconectar esta
un idad de Ia fueme de alimentaci6n de CA. AsegUrese
de que el conector este siempre operativo (f<icilmente
accesible).
Para modelos con el bot6n [POWER I o con los botones
[POWER! y [ON/STANDBYio
AI pulsar e l bot6n [POWER] para sek>ccionar e l modo
OFF nose desconecta totalmente de Ia red elCctrica. Si
nova a utilizar Ia unidad durante un perfodo de tiempo
prolongado, extraiga el cable de alimentaci6n de Ia
lorna de red de CA.
5.
6.
7.
8.
Para modelos solo con el bot6n [ON/STANDBY]:
AI pulsarel bot6n (ON/STANDBY] paraseleccionarel
modo Standby nose desconecta totalmente de Ia red
el&trica. Si nova a utilizar Ia unidad durante un
perfodo de tiempo prolongado, extraiga el cable de
alimentaci6n de Ia toma de red de CA.
Evitar pCrdidas auditivas
Precauci6n
Una presi6n de sonido excesiva de los auriculares de
bot6n y de los auriculares de cabeza puede causar
pCrdidas auditivas.
Baterias y exposiciOn al calor
Aviso
Las batcrias (paqucte de baterfas o baterfas instaladas)
no deben cxponerse a un calor excesivo como los rayos
del sol, fuego o similar.
Nunca toqueesta unidad con las manos hUmedasNunca utilice esta unidad ni su cable de alimentaci6n si
tiene las manos hlimedas o mojada'>. Si penetra agua o
alglln otro lfquido en el interior de csta unidad, h<igalo
revisar por su distribuidor On kyo.
Notas acerca del manejo de Ia unidad
Si tiene que transportar esta unidad. use el embalajc
original para cmpaquetarlo de Ia misma forma en que
estaba empaquetado originalmente a! adquirirlo.
No deje por mucho ticmpo objetos de pl<1stico o
goma sobre esta unidad ya que, con e l tiempo,
podrfan dejar marcas en Ia superficie.
Despues de un uso prolongado, es posible que los
paneles superior y posterior de esta unidad se
calienten. Esto es normal.
Si nova a usar esta unidad por un largo perfodo de
tiempo, es posible que al activarla de nuevo no
funcione correctamente, por lo que es aconsejable
que Ia utilice de vez en cuando.
Para modelos EE.UU,
lc>i>cP\Itl'!fl'JJil:~ • 'f'l\!IIICflltfl.lfl'J~filil U~llt\!0) • !'<
illl5!Nil!J5"JRlii'Jilll'f • -~~·~~lliil'll!illi~~!l!AililliO>l ·
Los cambios o modificaciones realizados por e l usuario que
no hayan sido expresamenle aprobados por Ia pane
responsable de Ia confonnidad podrfan anular Ia autoridad
del usuario para operar el equipo.
NOTA'
Este equipo ha sido probado y ha demostrado que c umple
con los Ifmites establecidos para dispositivos digitales de
·~
I'IM'rl!llzl',31::ifoi'ig8'Jl!ll!!l'I<J • iillfii!Zf.T:Pfrl'EJI!!
( il"l!m '
I&A'J!llii!Wil'io~,IJiiiiif!iJ:t'l!fiJlB'Jl!!31<illff
AC230V • 50Hz •
£
Wii::O)'I]ff>l"'~iWliliil'JrJJllillliF!i:lilil
Zr&mJ\!tfJrt~
, lllW!Il'i
' !iJtt
·
Wi!:::O IIJff;l~m\IUX~«Jillii'~i/1!
· ll!IWI'Ii51ll
Ji\ P!HE~liilllllilf!l#lil'Jill'l!!a<Jili!l~~llltlll l N~!l! )
~ ffijf-(Ef.@, •
!I! ~99 ll15~iU!t hi§
1.
ll!lililllV!Jl·
2.
i'MHI:lll:l!lli'l·
3.
4.
l1""'ffrf'1Wi'ftil,Cl, •
5.
6.
1.
8.
9,
10.
1 1.
12.
13,
jJiJ!ijiD!fiJliffilj£1\it •
l''ll!i'E$'ilili*A'IJI!!nf!l!llli>iillllli •
Rfltl!l')Z1tiii'J~ ·
l''ll!JfJttillii>\D , ml!l!ll'i*B'Jillii'ID!IIIlillifr'«'!!< ,
· lal11!11!!1!t , 11!1ii!!Jt •
11!-1", l!li:ltfl!!ili\~ii!!UtB'Jilltillli •
l''ll!~~iillllli'li'!mttil!!ii!Ulflili
"f'll':W~fll'l!litt!FoiFA'ililli!li!Ji!lltJI!!filji!fiA'J'li'~fiHllt
itlll , fll'llittlfoii'A'Jfilji!lif'ii'Wil!lfilji!liJt , t1'1'- il!l
tt!i>-il!l:ll: , ll:'JI!!filjuJif'ill'iffillfiljiiJlJt • ffHilllli'JI!!
A'JfiljJili • nfiljDJiltW!l:'JI!!tiiDJ11i11Ji!'& 7f.T:A'J'li''i':iill
•tB'J • !m!l!!llli'ltJtiJ\A'J!illiiJil!llitliiJ..!ilii'IOf'J · ~~ *
WJm111Ill!MI&Uollffi •
[lljJl:i*II:'/Uill\1\!, 'll<t'i~'IJI!J!EfiljliJ'i · 1JlHillDJil!liiit
iillillillfiflA'Ji!llll:'l\1·
Ri!l;lll!lliillllllJE:B'J'fli'l'llJG'$14' •
Ri!l;/ll!i'iillllllJE:B'JlliGWiil!fi,l
- lll:flj!;A'Jff£11! ' '4'!1' • :=:
~t.\1! , "#! , ll!G~'f , ITE!fl
l11$R!', '~ 'J"L•J:l,!iliJ!llif'iiil!
llliB'Jl11ll!·'!iJI:iitli!J:i'H
:'!I:!H ·
[J:J\t!jjlGJl<llfrJ!l'i!l!lllll;f , '~
iittillffiJ:jj(J'l!ll!il,'iA'Jfilji!fi.
14. ;~IOJil'l§B'JlXIfiff~<llA.,'ll':li!J-liJWt~A'1MiR , ill!
IIU:'!I:lflll;f'll'*~~~~~<ll·!m111i!l-l\!ll1Gfiljiililfl
1!ll • &ilt!J:illil!! • f'll'MMl1m¥UlllilliJ: · iillll1i*i1l
lliG:'!I:~·I!llitttni ~·lliGiil!llii~m·
15, lll'll'~~t~n~mA'ilfli!ll
l'HCFA'J!Iiili: , !i'i!Jti>i<llii!:\ · El!il'n!A'i!imn~<llA
ii<illifrWt~ '
A nti!M*I\lliGfiljlil!Elllill•
•
illtlliJIJlii#Wi •
D. !l!il!ill'il'iiOO!lDTilliFH.tt'll';l!l!lt · RfltW~ll!
illt:lll:llll<P§Ii5B'1tlili~'!JIIt · llSlli>!lDJI!~I!l'
litnJflt>JJ!&iil!iiiitll!f! , l'.tm'l:!Wt~~nEt'i*
oa!A'Jiitll;fiUHIIfillttilii!Jl(iJ1¥1JKnA'JJII(!il\ •
E, illtll1i~IJlii'!<~jjlGJ<o~ fll!lEIJlilll!lil •
F. illtlliiit\'l'l'tim'ii\'J\1\It , ll!Gi'HlliiFtfltt1'tll<J:
l'IJI!lE~!illilliGilliii!!EIJlifinl!J},.illi:H~
B.
C,
f'i ll/l!!liii'J&~ .
16. llii!I!HJ\!llli!r.lilli.Aii'l~~
~a;,J,,L,l''ll'Olll'!Jill!!l!Glllllli!r.lli1il!lilllil'll'Lfini%!A9f
~·llSI~OJfltffi~~m~!l!Gfll'm~~·~!&x~lliG
111¥ ·
17,
18,
M>l!lllil'lltl11mRl$'ll<*iliiZ!ll · l!ll'IUfi!M:&"
i1.l , ttl1Il7Eifli'lf%!m:ltJ: •
ll!il!!
i±kli\'li* , l''ll!liflkl'lHillllil!lB'J~!!il!!il!! •
l1Illl!iillillil!H''ll1t'i't'li'~, !llll'lllilliGt.\1!1' J: • fu,f!J:i*
f'iJEliiA'Jillilll ' illtilliffi<l!'fUWift!li*!li 20om B'Jiflj
l.l{ • lJ!iliii?tf*t# I Oom A'Jr.£1.l{ • iillflli"#!!l!GJ:Mll
f!iii'JiJii§lf<!l'i!illiliJiiliif!illiG111~ I Oom ' 1¥/tllillil>\
W!~A'i"l:rJI·
liit!&lii-R:itiini.Aiil!lll, f,lf'il,liil:!i!!IPfrf'iAii'f
DJA'itEfiillii~i!JJiioA'JI\im'I!JilillltU>Ml!ililr.li •
2.
l<i1otllliilla&*-'li'llli1fi>I\II¥Jillii'~<Pn<J31::im.il!l*
~<*JEHtfflll!SIIIl'ifl9,
~
3,
'
tlllll!)l])S!!\\itlil!!iliJI!l
~ti'W Onkyo ~~~Ujifti~;fi:
o
ii'R -i>li'I¥JilJ~~f'illlilili'll'lll~1tilllM~IIli, l1Il
ii!ll'Uillllilll'ii'>ili • nJ/ll~lllil;l&"'Wii'I~~JA'J il>llli
lllM • ii!lis:iJ! :li~J/ll')Zi'llA'Jttilllli\')Zfll • '~Wiil!lll
t'itt1ti • mmru · ii'llll!l!GJ:til!!1t">!i11J'I'!J>:Jf>'.ID\!1Jrl
ffiilllliGilliiiiGiliif!i"i'!ll!lllim·
*
ACI20V • 60Hz )
!ttill\l\!lilllill'I'B¥JllNI!!lti'J31::iilt?ttill!J:B'J , iii'illii!Z
lllvlifiljifJ'ilifl'iMJII;fDJ>:JITEI!l <m:!Jill!ll!!filjJ:) •
jfff):>'fj' (POWER]J'iiil!, jjlG[<iJB!ff!fj' (POWER]
'f{J (ONISTANDBYll'iiil!A',I\tll'!'
!liT ( POWER ]!Jiffiili~ OFF j<,!;J:ll;f , l'l'l''ie~liJ
nrrmvd- • ~omftr.l!iot&ll;fltHl'e/ITEI!li>:~i;l · onJI!f
!llill*lli:E31::im'ili!iliJii;!JiT·
6.
rltliiiill,fi (ONISTANDBY]J'iiil!B'Jiitll'! '
J'iiT (ON/STANDBY] tiiil!il!lt<ll\l'i!lfll'il:Bl'' l'*
7'C"'1;1Jtf'iliill\ • lalmf~:l!i~t«Bl'r.lll'Eiilt!llli>!lli
'i'i • •~:11flltii?.IJili:ExmtlltfiljJ!!;UtT •
Jli[J!jljl[.!J<JI
13oH
*l'lifl!lWlllif.QA'Jil!l~~ll!l"'ill!&~HI9<l'r •
~>l!!!i!ft!li!!\
·~
Itt~ (l!l~~~!l!G!ttil!!'li'~)l'l!!~~ft~~~
•ll.
7,
8.
~ RJ~{£~8:Jr"Ji"lJH:f~P.~*i:Ff.Jfii~_@'Jtl/Mff.1±
illiliii
m-*lli~~W.ZM·~ff~OOm~T~Hil·
;±.:
Inrormaci6n para el usuarlo sobre FCC
PRECAUCION'
4,
5.
lo)i>Oh'<'JiiJ<'I!l!l!fi'JJil:l'a , 'f'll!:llfill!filiil<llHHil•f•!lii!i!ill
fi'Jiillft.P ·
M1~31<~!11J •
ATTENTION ' POUR EV ITER LES CHOCS
ELECTRIQUES, INTRODUIRE LA LAME LA PLUS
ADVERTENCIA:
Clase B, de acuerdo con Ia Pane 15 de las Nonnas FCC.
Estos Ifmites estan establecidos para proporcionar una
protecci6n razonable frente a las interfere ncias perjudiciales
en una instalaci6n domestica.
Este equipo genera, utiliza y puede irradiar encrgfa de
radiofrecuencia y si nose instala y utiliza de acuerdo con las
instrucciones puede causar interferencias pcrjudiciales a las
comunicaciones por radio. Sin embargo, noes posiblc
garantizar que las imerferencias no ocurran en una
instalaci6n concreta. Si este equipo causa interferencias
perjudiciales a Ia recepci6n de radio o televisi6n, lo que
puede detenninarse apagando y encendiendo el equipo. se
aconscja a! usuario que intente corrcgir Ia interfercncia
uti li zando alguna de las siguientes medidas:
• Reoriemar o recolocar Ia antena receptora.
• lncrementar Ia distancia entre el cquipo y el receptor.
• Conectar el equipo a una toma domestica de un circuito
distinto al del que cl receptor esta conectado
• Consulte con el distribuidor o con un tCcnico de radion-V para
solicitarasiste.ncia.
xvriW~ii!!A'iil!!n •
l!t~~;II'!'Mill!l!IH-i!i'fJII(fiH, !lll'Mltl!llli'lll*ll!G
l!lli*A'ifllillH!Illli'llil • !lllf'l*ll!Gltfl!!n~!l!lilliJ..Ii'liill ,
if~!!! Ookyo A'il,liilllilli~l'liffifrtil~ •
llli113oX!IUii
lillrl.l'll'i!l!O>illtllii, ofrlil!l!lmr~~ftn , J'ii!\ijll1/i'l
ll;fA'Ji;!~&nrtill:fri;!~·
l''ll':l1fjji!WrJ<)!!~W~,Itlll'i!l.ttiil!lil1iJ:ll;fflll~"- ,
fiSI~DJ~f/1filllii1WH1Ull'ITfPB~ •
Mlf'iff,¥rJJf!l!lllllli , mliiliB'1TiHlllW1Ji:ll1oof!il"r~
:111 , llllmtt'i;>;!iliili: •
lalli!&WftHll'lii!Jll>l!fl,l , l'l:;Xtml!lBJ'DJflt®Iit
l'tt'ii\' , ::lii!i\iil!JE:J!IIil(;RJ •
a)
b)
1111111111111111111111111111111111111111111111111111111
*29401470A *
Important Notice Regarding Software
The software package installed in this product includes software licensed to
Onkyo Corporati on (here inafler, called "Onkyo'') direcrly or indirectly by third
pany developers. Please be sure to read this nmice regarding such software.
Othel"'o\·isc: , iftheworkisaderi\-ati•·eoftheLibrary.youmaydistributetheobjectcodefortheworkun<.lerthe
termsofSection6.AnyexecutablcscontainingthatworkalsofallunderScction6,whelherornottheyarelinked
directlywith!heLibraryit:>elf
6.
Notice Regarding GNU GPL/LGPL·applicable
Software
This product includes the following software that is covered by GNU General
Public License (hcrcinaflcr, called "GPL") or by GNU Lesser General Public
License (hereinaft er, called "LGPL").
Onkyo notifies you that, according to the au ached GPLILGPL, you have right to
obtain, modify, and red istri bute software source code for the listed soft ware.
As an exception to !he Sections above, you may also combine or link a "'work that uses the Library'" with the
Librarytoprodoccaworkcon tainingponionsof!heLibrnry.anddistributethat""orkundtr!ennsof)·our
choice.provided thatthetermspermitmodificationofthe..-ortforthecustomer"sownuseandte,·erse
cngineeringfordebuggingsuc h modilications
You must give prominent noli« with each copy of the wcnk that the Library is u>ed in it and that the Library aod
itsusearecoveredbythis License. Yoomustsupplyacopyofthls license . lftheworkduringuecutiondisplays
copyright notices, yoo mmt include the copyright notice for the Library among them. as well as a rderence
directingtheu..,rto!Mcopyofthi,License.Also.youmustdooneoftheselhings:
a)
h)
'.171-o;):z::rto::IIIIT-t~al!t.us•stt
:$:i!l/iiliCI~il!,:tl0Y7 ~? I:PIC I<i:, :t/'\'3-l*it~l± (~JT
fl!i<l±J C:
t_,;l']rJ IJ1!1l:'O%'d:'Jil!!llil<JICJI_I<i:llli!lla<JICi<;!!lO)ifill1!\'tl:t/cY7 ~?I?
IJ'23'nc::so;n-. <::tl50)Y7 ~?I rlcl!llo<>2t:smstt1!£\9'<::-W'i
<rc,:L13'9 J:5i!OimL1EJlG35113'9.
~)
Accompany !he work with~ complo::te corresponJing machine-readable source code for the Library
includingwhateverchangcs,.·ereusedinthework(whichmuslbedistributedunderSections I and2
above); and, if th~ work is an executable linked wi th the Library. with the complete machine-readable
"wort!hatuseslheLibrnry"".asobjectcodeandlorsourcecode ,so thattheusercanmodifytheLibrary
Bndthenrelinkroproduceamodifiedexecutablccontaining!hemodifieJLibrary.(l!isunderstOOtlthat
theuserwhodungestllecontentsofdefmitionsfilesin tlleLibr...-ywillnotnece"""rilyheableto
reco mpiletheapplicationto usethemodifieddefinitions.)
U>e a suitable shared library mechanism for linking with the Library. A snitable mechani<m is one that
(l)u!ifiatrun timeacopyofthelibraryalreadypresentontheuser"scomputersystcm,ratherthan
copyinglibraryfuncrionsintothee:\Ccutable,alld{2)willoperateproperlywitllamodifiedversionof
the library, iftheuserinstallsone.aslongasthemo<.lifiedversionisintc rface-compatiblewiththe
vcrsiontha!theworkwa-;madcv.ith
A<·company the work with a written offer. valiJ for a! least three years. to gi,·e Ihe same u"'r the
materi als~pedftcdinSubsection6a.above.forachargenomorethan theeostofperformingthis
Jistribution
d)
c)
GNU GPL/LGPL iRI!l:J? I-? I71<:1!119:Qi!S9i!J5tt
:$0~ /iiliCI<I: .
lfdiwibulionoflheworkismadcbyofferingaccesstocopyfromadesignatedplace.offerequivalent
accesstocopytheabovespe.;:ifiedmaterialsfromthesameplace.
Verify!hat the userhasalready rece ivedacopy ofthe>ematerialsorthatyouhavealreadysent!hisuser
CJ"fO) GNU General Public License (tJT fGPLJ C: G3'9)
3'/cl<l: GNU Lesser General Public License (~)T rLGPLJ 1: G3'9) 0)
i!l!!l1!\'tl:t0Y7 ~?I71J 1 23'flC::S'J3'9.
i!Oil<!111d::l:\f:t0) GPL!LGPL 1Ci11'L1C::tl50)Y7 ~? I7Y-A::J- t'O)A
'f, i&lL flli2100)111'11JIJ135'l>L:C:1!SmSttL1/cG3'9.
Foran exe.:utable, tberequiredformofthe"workthatuses !hcLibrary""mustindudeanydataandu!ility
programsneededforreproducingtheuecutablefromit.However.asaspe.;:ialexception.thematerials!obe
distributed need not include anything that is normally distributed (in either source or binary form) with the major
components(compilc-r,kernel . andsoon)oftheopera!ingsystemonwhich theexecutableruns.unle"that
componentits.elfiiCCompanies!llcexecutable
lt mayhapp<"nthatthisrequirementcon tradicts!helicense restrictionsofotherproprietarylibrarie sthatdonot
normally accompany the operating system. Such a contradiction means you cannot use bo!h them and the Library
togetherinanexecutahle!hatyoudistrihute
Package List
lb'T-:JO)A 1-
7.
You may place library facililies that are a work ba<ro on 1M Library ~ide-by - side in a single library together
withotherlibnry faci!ities notco>"=dhythisli cense.anddistributesuchacombir.edlibrary.provldedthat
theseparatediwibutionof!heworkbascdonrheLibraryandoftheotherlibraryfucil itiesis otherwise
permiued.andprovidedthatyouJothesetwothings
a)
linu x
uCiibc
libgcc
libstdc++
libmms
compat-wireless
wpa_supplicant
mdns-repeater
li biconv
bluez
dbus
c)
If such an object file uses only numerical parameters. data structure layo~ts anJ ac~ssors. anJ small m""ros and
small inlinefuo.;:tions(ten lines or Iessin l~nglh).!hcntheus.eofthcobject file isunrestricted.regardlessof
"-"he! her it ;, legally a derivati,·e wor~. (E~ecutahks containing this object code plus ponions of the Library will
stillfall under!kction6.)
busy box
Accompany !he combined library wi th a copy of the same work ba<ro on the Library. uncombined with
anyothcrlibraryfacilities . This mustbedistributedunJerthetermsoftheSectionsabove
Give p10minen1 notice with the combined library of the fa.ct rha! part of it is a work based on the Library.
and explaining 10.-here to find the accompanying uncombined fonn of the same: work
You may one copy, modify. sublicense. link with. or distribute !he Library except as expressly pro>ided under
this License. Any auempt otherwise to copy, modify. sublicense , link with, or distribute the Library is void,
and will aulomatically terminate your rights under this License. However. panics who have received copies.
T hese requirements apply to the modified wort as a u.·hole. ff idenlifiablc: secl ions of that wort are 1101 derived
fromlhcProgram.andcJnbcreasonablyconside rediiKiependcntandseparateworksinlhcmselves,lhen!his
Li cense. and its terms. do no! apply to tho>e section~ when you distribute them as separate work s. But when you
Jistribute the same sections as pan of a wllole which is a \1iOtk based on the Program. the distribution of the whole
must be on the terms ofthis Licen>e. wllose permissions for other licensees e~tend to the entire whole, and thus tO
~achanJeverypar!regardlessofwhowroteit.
Thus, it is not the intent of this section to claim rights or contest your rights to work wrinen entirely by you; ra1her,
thei ntentis!oeurcisctherighttocontrol theJistrihutionof<.lerivati\·cor collecti'·cworksbasedonlheProgram.
In addition, mere aggregation of another work not based on the Program witlllhe Progrnm (or with a work based
on !he Program) on a ,·olume of a >torage or distribution medium does not bring tbe other work under tile scope of
thisLicen>e
3.
Accompany it with the complete corresponding machine-readable source code. which must be
distributed under the tcrms of Sections 1 and 2 abov~ on a med ium customarily used for software
interchange;or,
b) Accompan)"itwithawrittenoffer.validforarleast!hreeyears.togiveany!h irdparty. forachargeno
morethanyourcostofphy&icallyperformingsoun:edistrihution.acompletemachine -read.ablecopyof
the ~orresponJing source code. to be Jistributed under tile terms of Sections l and 2 above on a medium
customarilyusedfor softwarcintcrchange:or.
c)
Aceompany it wilh the information you recei>·~d as to the off~ r to distribute correspooding sour~ cod<:
(Thisahemativeisallowedonlyfornoncommercialdi!!ributionandonlyifyoureceived!heprograrnin
object code or eucutabk form with tuch an offer. in accord with Su~tion b above.)
The source code for a work means Ihe preferred form of !he work for making modifications to it For an
executable work. complete soun:e code means all the source code for all modules it contains. plus an)· astociated
ioterfaceJefinitionliles.plu~thescriptsusedtocontrolcompilatiooanJinstallationof theexecutable. Howe>-er.
asa<peciale~ccption.tltesou rcecododi.o;~ributcdnc:edno!inc ludeanythingthat i snormallydistributed(incirru:.r
source or binary form) with the majorcomponcn!S (com piler. kernel, aod so on) of the operating system on which
the executableruns.unlessthatcomponent itselfaocompaniestheextcutabte
lfdi~trihution ofexe<.:utableorobjectcode is made by offering access to cop~ from a designated place, then
offeringcquivalemaccesstocopythesour.:ecodefrom!hesameptacecouo!Sasdittributionofthe sout<'ecode.
eventhoughthirdpaniesarenotrompelledtocopythcsoun·ealong withtheobjectcode
4.
5.
6.
7.
orrights,fromyouunderthisLi~nsewi Unotha,· ethe irlic enscsterminatedsolongassuchpanie sremaini n
9.
C::t\50)CJ-A::J- t'O)clli!l!\l~ll!IG3' GC::l<l:, ::J-Jvto/5'- ICi!OrcjL\tl;b
tt<r.:,:L,.
t.>S. C! - A::J- t'O)<f'Jl!IC:::>L\CO)i!OrclL\tl;btti<I:C:)g!t*<lc,:L\,
GNU LESSER GENERAL PUBLIC
LICENSE
patentlicen.•e"-"Ou ld not pc:rmit fOyalty-freeredistributionof!heProgrambyall l h~whorecei,~ copies
directlyorindirecdythroughyou.lhen theon lywayyoucouiJsatisfybothitandlhisLicense""·ou ldbeto
refrainentirelyfromdistributionof!heProgram
lfanyportionofthissectionishelJ invalidotunenforceableunJeranypaniculatdrcumstance.theba lanceofthe
sectionisintcndedtnapplyandthesectionasawholc isinlendedtoapplyinothercircumstance>
1 0 . Each time you red istribute the Li brary (or any work based on the Library), the recipien t automatically
recei,·esalicrnsefromtheoriginallieensortoeopy.distribute,linkwi!hormodifylhe librarysubject!O
lhese terms aod condi tions. You may not impose any funhcr restriel ions on 1M recipients" exercise of 1he
rightsgrantedhcrein . Youarenotrespons ibleforcnforcingcomplianccbythirdpanies wilhth isLkensc:
ltisnotthepurpo>eofthisscctiontoinduceyoutoinfringeanypatentsorot herpropenyrightclaimsor tocontest
\llllidityofanysuch daims;thissectionhas lhesolepurpo>eof prorectingtheinle grityofthefreesoftware
dimibution system, which is implemented by public license practices. Many people ha~e made generous
contributionstorhewidt: rangeofsoftwa redistrihutedth roughthat systeminrelianceon consistentapplicationof
that system ; it isuptotheauthorldo!)OI"todecideifheorsheiswillingtodistnbutesof!warethroughanyother
11. lf.asaconscqucnceof acounjudgmentorallegarionofpatentinfringementorforanymherreason(no!
limited topatemissues),condi tionsareimposedonyou(whetherbycounott1er.sgreerttentorotherwise)
that contradict the conditions of !h is License. the~ do note~cuseyou from theconJitionsofthis License.lf
youcan no!distributesoastosatisfysimultaneousl)·yourobligationsu nde r this Licenseandanyorher
This>ectionisinteoded !omake!horoughlydearwhatisbel ievedlobeacooS<."quenceoftherestofthisLicen>e.
systemanda licen~oeecaonotimposethat~ hoicc.
a.
pc:rtinentobligations. thenasaconsequen~eyoumay notdi"tributetheLihraryatJII.Foreumple.ifapa!en !
licensewouldnotpermitrO)Iahy-frecredistributionoftbeLibrarybyalllhose whorecrivecopiesdirectlyor
entirely fromdistributionofthe li brary.
5~ Temple
Place. Suite330. BooLOn. MA 02111-1307
USA Everyone is permined to copy and distribute ve!batim copies of this license document, but changing it is not
allowed.
IThis is the first released version Q(d!e Lesser GPL. It also counts liS !he successor of the GNU Ubrary Public
Liccnse,version2.hence theversionnumber2.L]
Preamble
The licenses for !lXISt sof!woue a~ designed to take awa}· your freedom to share and change it. By contrast. the
GN U Ckneral Public Licenses are intended !o guarantee your freedom to share and change free sof!.,..are--!0 make
sure!hesof!wareisfree forallit~users
This license. !he Lesser Genera l Public License, applies to some sped ally desigruned software package~ ­
typicallyl ibrarics--of!heFreeSoftwareFoonda!ionandotherauthorswhodccide!ouseit. Youcanuse ittoo,but
wesuggestyoufirst!hinkcarefullyaboutwhetherthisl i censenr theordinary~nerall'ublicLicenseis !hebeller
Sttategy touseinanypanicu larcasc. basedonthee:~planation s below
When we speak of free software, we are referring to fre«<om of use, not p<ice. Our G<:neral Public Lke11ses are
designedtomale•urelhatyouhavethefreedomtodistributecopiesoffreesoftware(andch.argefor!hisservice
ifyouwish);thatyoureceivcsourceeodeorcangetitifyouw antit;thatyoucanchangcthesoftware anduse
piecesofitinnewfreeprograms:andthatyouare infonned thatyoucandothesethiugs
To protect your rights. 10.·e need to male restrictions !h~l forbid distributors to deny you these rig hiS or to ask you
tosurrenderthe>erights. Theserestrict ionstransla!etocenainresponsibili !ies foryouifyoudiwibutecopiesof
thelibraryorifyoumodifyir
For e~ample. if you Jislribute copies of the libnuy. whether gratis or for a fee, you must give !he recipien!S all the
right>thatwcgaveyou. Youmustmakesure th atl hey. too.receiveorcan)l.c t theoourcecode. tfyouliokother
code with the library. you must provide ~omplete object files to rru:. recipients. so !llat they can relink them with
the library after making changes to the library and recompiling il. And you mu~t show them the$e terms so they
know the ir right>-.
We protect your rights with a two-Mep method: (1) we copyright the library, and (2) we offer you !his lken>e .
which gives you legal permi ssion to copy.distribul~ and/or modif)· the library. To protect each distributor, we want
to make it very clear that there is no "'"llmlll ty for the free library. Also. if the library is modifieJ by someone else
andpa<<roon.therecipienlsshouiJknowthatwhattheyhaveis no!the originalversion . ~othattheoriginal
author"sreputationwillnotbeaffec "'dbyprobltms!hatmigh!beintroducedbyothers.
Finally. software patents pose a constant threat tO lhe existence of any free program. We wi•h to make sure that a
companycannoteffe<:tiv.:lyre$1ricttheu>ersofafn:eprugrarnbyobtainingare:;trictivelicensefromapatent
holder. Therefore. we insi~t that any patent license obtained for a •·ersion of the libmry must be con~i<tent with the
fullfreedomofuse:;pedfiedinthislken~oe.
Most GNU •oflware, including some libraries. is covered by the ordinary GNU General Puhlic Licen>e. Th is
lken>e, the GNU LesserGenernl Public Licrn>e. applie> to ~enain designated libraries. and is quite diffcrem from
!heordinary·GeneraiPuhlicLicensc. Weu>-elhisl iccnseforcenainlibmrie s inordertopermitlinkingthose
lihrillies intonon -frecprograms.
WhcnapfOgram is linkedwitha library ...·hetherstaticallyorusinga sharedlibr.lry.rhccombinationofthetwois
l~gally speakingacombinedworl-;.aderivath·eoftheoriginallibrary. Theordinary Genc:ral PublicLicen.'e
therefore permil< such linking only if the entire combination fits its criteria of freedom. The Le''':rGencral Public
LicensepermiB more lncriteriaforhnkingothercodewiththelibrary.
We ~I! this license !he ""Lesser"" Genernl Public Ucen~e hecausc it dn<:s Less to protect the user's freeJom !han
the ordinary General Publk License. It also provide~ other free software developers Less of ~n ath"antagc o,·er
co:pc:~~g ~:n ·fr;;:.~sr~msi The:et~sadva~r;:e: are,.,the reawn we use the ordi~~:;r~;n~~l Public Liccno:e for
you do not a.ccept this License. Therefore . by modifying or distributing the Program (or any work baseJ on
theProgrnm).youindicate)·ourac«ptanceofthisLicensetodoso.andalli!s!ermsandconditionsfor
copying.distributingormodifyinglheProgrumorworksbasedon it
Each time you redistribute the Program (or any work based on Ihe Progrnm). !he recipient automatically
receives a license from the original licensor to copy. Jistribute or modify the Program subject to these terms
and conditions. Youmaynotimposeanyfunherrestri<"lionsonlherec ipients"exerc iseoftherigh!Sgranted
herein. You are not responsible for enforcing compliance b~ third parties to this Licen~e
IF.asaconsequeneeofacounjudgmentorallegationofpateminfringementorforanyolherre.ason(not
limited to patent issues). conditions are imposed on you (whether by coun order, agreement or otherwise)
that contradicttheconditionsofthisLicense.r he)"donotucuseyoufromtheconditionsofthislicense.lf
you cannotdistributesoas tosatisfysimultaroeouslyyourohligationsunder thisLicensea!ldanyother
penin~m obl i gations. thenasacon.o;equenceyoumaynntdistributethe Programat aii.For example.ifa
i ndirectlythmugh you.thentheonl~way)·oucou(JsatisfyhothitandthisLkensewouldbetorefrai n
Version 2, 1, February 1999
Copyright(C) 1991. 1999 Free Software Foundation , 1~.
You are not required to accept this License. sin~c you have not signed it. However, notlting else gran IS you
permissiontomodifyordistributethe Libraryoritsderivativeworks. Thes.e actionsarcprohibitedbylawif
youdonotaccept thisLicense.lllcrefore, bymodifyingordistrihuting!he L.ibrary(oranyworkbaseJon the
Library).youindkateyourae<:eptaoceofthisLiceru;ctodoso.andallitstcrmsandconditionsforcopying ,
distributiogormodif)·ingthe ljbt"aryorworksbasedonit.
You may not copy. mod ify, sublicense. or distribute 1M Program eJtcep! as expressly provided under this
Liunse . Any attempt otherwise to ropy. modify. sublicense or distribute the Program is void . and will
automaticallyterminateyourrights undcrthisLicensc.Ho"-"ever.parties whohavereceivedcopie!;.orrighiS.
from you under this License will not have their licenses terminated w long a~ ~uch parties remain in full
compliance.
Youarenotrequiredtoacceptlhislicense.sinceyouhavenotsignedit. l-lowever.nothingelsegrantsyou
permissiontomodifyordistrih~te!he Programoritsderivative worh.Theseactionsarcprohibitedbylawif
full compliance
iperf
You may copy and distribute rru:. Program {or a wort based on it . under Scetion 2) in object code or
executableformunderthetermsofSeclions 1 and2aboveprovidedthatyoualsodooneofthefollowing
a)
b)
8.
You mull cause tt>e modified files to cmy prominent notices stat in~ that you cha:tged the files and the
date ofanychange.
You must cause any worl-; !hat you diwibute or publish. that in whole or in pan contains or i• <.lerived
from 11te Progr~m or any p;;n thereof. to be lkenseJ as a whole at no charge to all third panies under !httermsofthisLicense .
If the modifted program normally readl. commanJs inter.-.1ively when run, you must cause it. when
suu-tedrunningforsuch interactiveuse inthemmt ordinaryway. toprimordisplayananoouncement
includinganappropriatecopyright notice and anoticethatthere is no warrnnty (orcl~e, sayiug that you
provideawarranty)andthatusersrnayredi stributetheprogramunJertheseconJitions.and telling!he
user how to view a copy of this Licen>e. (Exception: if the Program itselfi• interactive but dn<:• not
normall)"p<intsochanannounccment,yourworkbasedontheProgramisnotrequiredtoprintan
announcement.)
lfanypon ionof!hissection isheldinvalidoruncnforceablcu nderanypanku larcircumsumce.thebalanceofthc
sec!ionisintendedtoapply,andthescctionasawholeisintendcdtoapplyinnlhercircumstances
ltisno!thepurposeofthissectionto induceyoutoinfringea:typa!entsoro!herpropertyrightclaimsor tocomes!
validityofany suchclaims; thissectionhas!he solcpurposeofprOiectingthcintegrityofthe free~oftware
Jistribution sy>tem which is implcm<:nted by public licen>e practices. Many people have maJe generous
contributionsto!hewidernngeofsof!ware distribute<lthroughthatsystcminrelianceonconsistcnt applicationof
that ~y~tem: it is up to the author/donor to decide if he or she i~ willing to distribute software through any other
systemandalkensee cannotimpo>e!llatchoice
ThissectionisintenJedtomake thoroughlyclearwhati.<belic:vcdtobeaconse<;jucnceoftherestof thisLicense
12.lf thedistributionandloruseof!he Libmryisrestrictedincenaincountrieseitherbyparen!sorby
copyrightedinterf•ce<.theoriginalcopyrightholderwhoplacestheLibraryuoderlhislicensemayaddan
explicitgcographicaldistributionlimitalione:~cludingthosecountrics.sothatdis!ribu!ionisperminedonly
in or among countries not thus c ~duded . ln such case. !his Li«nse incorporates the limitation as if wrinen in
thebodyof thisLicense.
13. The Free Software Fouodation may publish revised and/or new >"CIT>ions of!M Le<...er General Pub li~ Licen>e
from time to time. Such n.:w versions will be sim ilar in spirit !0 the pre scm version, but may differ in detail 10
addressnewproblemsorconcerns
Eachversionisgi•·enadi<tinguishingvcrsionnumber.lfthe Libmry spe.;:ifies aver sionnumbcr ofthitLicen:;c
whichapplicstoitand'"anylatervcrsion"".youhavetheoptionoffollowingthetermsandconditionseitheroftha!
v.:rsiooorofanylaterversionpublishedhythe FrecSoftwareFouodation.lftheLibrary doesnotspecify l licens.e
versionnumber.youonaychoo>eanyversiooeverpublishedbythe FreeSoftwaref-ounJation
14 .1fyou u.·ish toincorpora!epartsofthc Libraryintootherfreeprogramswhnsedistributionconditionsare
incompatiblewith!hesc ,write!otheauthortoaskforperm i ssion.Forsoftwarewhi ch is~opyrightedbythe
Free Software Foundation. wri te to the Ft<'c Software Foundation: "-"e sometimes make exception~ for this.
Our decision will he guided by the two goals of p~servi ng 1M free statw; of all derivatives of our free
soh 10.-are andofpromotingthesharing~odreuseofsoftwaregencrally.
NO WARRANTY
15. BECAUSE Ti lE LI BRARY IS LICENSED FREE OF CHARGE. THERE IS NO WARRANTY FOR Til E
LIBRARY. 10 T HE EXTENT PE R MillED BY APPLICAB LE LAW. EXCEI''T WHEN OTHERWISE
STATED IN W R ITIN G THE COPYRIG IIT HOLDERS AND/OR OTHER PARTIES PROVIDE TilE
LIBRARY ""AS IS"' WITHOUT WARRANTY OF ANY KIND. EITHER EXPRESSED OR IMPLIED.
INC L UDtNG. BUT NOT LIM ITED TO. TilE IMPLIED WARRANTIES O F MERCIIANTAB ILITY AND
FITNESS FOR A PART ICULAR PURPOSE. THF. ENTIRE RISK AS TO T HE QUALITY AND
P ERFO RMANCE OF THE LIBRA RY IS WITH YOU. SHOULD Tl-1£ LIBR ARY PROVE DEFECTIVE.
YOU ASSUME THE COST OF ALL N ECESSARY SERV ICING. REPA IR O R CORRECT ION
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WR JTJNG WILL
ANY COPYRIGHT HOLDER. OR ANY OTHER PARTY WHO MAY MODIFY AN DtOR
REDISTR IBUTE THE LIBRA RY AS PERMITTED ABOVE. BE LIABLE TO YOU FOR DA MAGES.
INCLUDING ANY GENERAL. SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT O F THE USE O R INABI LITY TO USE THE LlBRt\RY (INCLUDING BUT NOT LIMITED TO
LOSS OF DATA OR DATA BEJNG RENDERED INACCU RATE O R LOSSES SUSTAINED BY YOU OR
HIIRD PARTIES OR A FA ILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE).
EVEN IF S UC H HOLDER OR OTHER PARTY liAS BEEN ADV ISED OF THE POSSIBILITY OF SUCH
DAM AGES
lfthcdistributionandlorll•eoftheProgramisrestrictedincertaincountrieseitherbypatentsorhy
copyrightedinterfaces.theoriginalcopyrightholderwhopla""sthe Prog1"3.munderthislice nse mayaddan
explici t geogrnphicaldistribution limitationexcludingtho:secountries,oothatdistrihlllionispermittedonly
inoramongcountriesno!!hus exduJed. lnsuchcase.thisLiccn"'incorporatesthc lirnitation asifwrittenin
thebodyofthis Li~nse
9.
The Free Software Foundation may publish revised and/or new versions of the General Public License from
time totimc.Suchnewvcrsions ..,·illbesimllarinspiritto!heprest:n!ven;ion.butmJydifferindetailto
addressnewproblemsorconcems
Each version i' gi•·en adistingui:;hi~g ,·ersion number. If the Program specific& a version number of thi s Licen>e
which applies toi l and ··any lateTversion"",you have the optionoffnll""'·ing!heterm.~andconditionseitherofthat
vcrsionorofanylater versionpublishedbytheFro:e.SC.ftwarcFoundation. l flhe Programdoes notspecifya
'"Crsionnumberofthislicense.you maychooseanyvcrsioneverpublished bythefreeSof!wareFounda!ion.
10. If you wish to incorporate pans of the P10gram into other free programs whose distribution conditions are
diffcren!,writerotheauthortoaskforpermission.Forsof!ware"-·hichi s copyrightedbytheFree Software
Foundation,.,.·rite totheFrccSoftwareFoundation;wesorttetimesmakc exceptionsforthis.Ool r decision
willbeguidedbythei"-'Ogoaltofpre>er.· ingthefrcestatusofaHderivBti•·etofourfreesoftwareaodof
promotingthesharingandreuseofsofr.waregenerally.
NO WARRANTY
1 1. BECAUSE TilE PROGRAM IS LICENSED FREE OF 0 -IARGE. Til ERE IS NO WARRANTY FOR THE
PROGRAM, TO T HE EXTENT PERMTTfED BY APPLICABLE LAW. EXCEPT W HEN OTHERWISE
STATED IN WR ITING T HE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE Til E
PROGRAM "'AS IS" WI T HOUT WA RRANTY OF ANY KI ND. EITHER EX PRESSED OR IM PLIED.
INCL UDING, BUT NOT LIMITED TO, THE IMPLIED WARR ANTI ES OF ME RC HANTAB ILITY AND
RTNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RIS K AS TO T H E QUALITY AND
PERFORM ANCE OF TI-l E PROGRAM IS WIHT YOU. SHOULD THE PROGRAM PROVE
DEFECTIVE. YOU ASSUME THE COST OF ALL NECESSARY SERV ICI NG , REPAIR OR
CORRECTION
12. TN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL
ANY COPY RIGHT HOLDER. OR ANY OTHER PA RTY WHO MAY MODIFY AND/OR
RE DIST RIBUTE TilE PROGRAM AS PERMITTED ABOVE. BE LIABLE TO YOU FOR DAM AGES.
INCLUD ING ANY GEN ERA L. SPECIAL INC IDEJ'I,'TAL OR CONSEQUENTIA L DAMAGES ARIS ING
OUT O F THE USE OR INAB ILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIM ITED TO
LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR l.OSSE.S SUSTAI NED BY YOU OR
TH IRD PARTf ES O R A FA ILURE OF T HE PROGRAM TO OPERATE W ITH ANY OTHER
PROGRAMS). EVEN IF SUCH HOLDER OR OTII ER PARTY HAS BEEN ADV ISED OF Til E
POSSIBILITY OF SUCH DAM AGES.
20.Tremor
2 1. Mersenne Twister
22.cURL
23.c-ares
~~:'I7
f---'7 I70)~ 1'F3'ft0)~*1;:~-='i!.
ntt l6~..rFO)P''HiH:<~:r!;a l <=i~HlJt..1T;;;.U~~.
(1)bfsh-sk
Copyright (c) 2007 Samuel KABAK
Permissionisherebygrnnted.freeofcharge.toanypertonobtainingacopyofthissoftwareandassocialed
documentation files (the "Software"). to deal in !he Software without restriction , including without limitation the
rights to use. copy. modify. merge. publish. distribute. sublicense. and/or 5ell copies of 1M Software. and to permit
persons1owltom theSofl,.·areisfumishedtodoso.subjecttothefollo"-·ingconditions:
The abowcopyrightno!iceaodthispermis<ionnoticeshallheincluded inallcopiesorsubstanlialponionsofthe
Software
THE SOFTWARE IS PROV IDED '"AS IS"". Wn"HOUT WARRANTY OF AN Y KIND, EXPRESS OR
IMPLJED. INO..UDING RUT NOT LIM ITED TO T HE WARR ANTIES O F MERCH AI\'TABILITY. FITNESS
FOR A PARTICUL AR PURPOSE AND N"ONINFRINGEMENT. IN NO EVENT SHALL THE AUTliORS OR
COPYR IGHT HOLDE RS BE LI AB LE FOR ANY C L AfM . DAMAGES OR OTHER LlABIL n"Y, WHETHER
IN AN ACTION OF CO NTRACT. TORT OR OTHERWISE. ARISING FRO M. OUT OFOR tN CONNECTION
WITH TilE SOFTWARE OR THE USE OR OTIIER DEALI NGS IN THE SOFTWARE
(2)1xml
Copyright(c)2lXXI-2003 1nte1Corporation Allrightsre>erved
Redi stribution and use in source and binary fOfllls, with or without modification, are permitted proviJed that the
following conditions arc met
• Redistributionsofsoun:e code mustretaiotheabo,·eropyrightnotice,!hi slistofconditionsaod the
following disclaimer.
• R«<istributionsinbinaryformmust reprodocetheabove copyrightnotice . thitlistofcooJ itionsandthe
followingdisclllimerinthedocumen!alionandlorother ma"'rial:; providedwitb!hedistribution
• Neither name of Inte l Corpor<~tioo nor the narn~ of its contributors may be used to endorse or promote
prOOucrsdcrivedfromthissoftwarc"·ithoutspe.;:ificpriorwriltenpermission
TH IS SOFTWAR E IS PROVIDED BY THE COPYR IGHT HOLDERS AND CONTRIBUTORS "'AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTtES. INCLUDING, BUT NOT LIM ITED TO. Til E IMPLI ED
WARRANTIES OF MERCHANTAB ILITY AND FlTNESS FOR A PARTICULAR PURPOSE ARE
DISCLA IMED. IN NO EVEJ'I,'T SHALL INTEL O R COI\"TR.IBUTORS BE LIAB LE FO R ANY DIR ECT.
IN DI RECT. INC IDENTAL. SPECIAL . EXEMPLARY, O R CONSEQUENTIAL DAM AGES (INCLUDING.
BUT NOT LIMITED TO. PROCUREMENT OF SUBSTITUTE GOODS OR SERV ICES; LOSS OF USE.
DATA. O R PROFITS; OR BUS INESS INTERRUPTION) HOWEVER CAUSED AND ON AN Y THEORY OF
LIABILITY. WHETHER IN COt\'TRACT. ST RICT LIAB ILIT Y, O R TORT (INCLUDING NEGLIGENCE OR
OT HERW ISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADV ISED O F
THE POSSIBILITY OFSUCI I DAMAGE
(3) 1ibcut1
COPYRIGHT AND PERMISS ION NOTICE
Copyrlght(c) 1996-2007,Danie1Stenberg. <dlnicl@haxx.se:>.
All rights reserved
Permissiontouse. copy,modi(y.anddistributethissoftu·areforanyporposewitllorwi thoutfeeisherebygrnn!ed.
P'"'·idedthattheabovecopyrightnoticeanJthispermissioonotkeappearinallcopie1
Ti lE SOFTWARE IS PROVIDED "AS IS"", WITHOUT WA RRANTY OF ANY K.IND. EXPRESS OR
IM PLIED. INCLUDING BUT NOT LIMITED TO THE WARRANTI ES OF MERCH ANTABILITY. FlTNESS
FOR A PARTICULA R PURPOSE AN D NON INFRINGEMENT OF THIR D PART Y R IGHTS. IN NO EVENT
SHALL THE AUTIIORS OR COPYRIG HT HOLDERS BE LIAB I..E FOR ANY CLA IM. DAM AGES OR
OTHER LI AB ILITY. WHETHER IN AN ACTION O F CONTRACT, TORT OR OTHERWIS E. ARISING
FROM. OUT OF O R IN CONNECT ION WITH THE SOFTWARE OR THE USE O R OT HER DEALINGS IN
T HE SOFIWARE.
bcep! as contained in this uotice. the name of a copyright holder sh~ll not he used in adYcnising or otherwise to
promotethesale.useorotherdealings inthi sSoftwarewilhoutprior wriUenauthorizationofthccopyrightholder.
(4) libFLAC
Copyright (C) 2lXXI,2001.2002,2003.2004 ,2005 .2006.2007
Jo~h
Coalson
ReJistributionanduseinsoun:clll!dbinaryfonns."-"ithorwi!houtmodifi~tion,areperm inedprO\'ided!hatthe
followingconditionsaremet
- Redi~tributionsofsource code mu~tretain the above copyright notice. this list of conditions and !he
foiiO\Io·ingdisclaimer.
Redistributions i nbinaryformmustreproduce!h~abuvecopyrightnotice.thislistofcond it ioos and!hc
following dhdai mer in !he documentation and/or other materia ls pTO\'ided wi lh the distribution
Neither the name of the Xiph .org FounJation nor the names of itsy be us contributors may be used to
endorse or promote products <krivcd from this !IOf!ware without specific prior wri tte n permission
nus SOFlWARE IS PROVIDED BY TilE COPYRIGHT HOLDERS AN D COI'ITR iliUTORS
""AS IS'" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING. BllT NOT LIMITED TO. T HE IMPLIED
WARRANTIES OF MERCHANTABfLITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCL AIMED . tN NO EVENT SHALL TH E FOUNDATION OR CONTRIB UTORS BE LI ABLE FOR ANY
DI RECT. lNDIRECf.INCIDENTAL. SPECIAL. E XEMPLA RY, OR CONSEQUEN TIA L DAM AGES
(INCLU DING. BUT NOT LIMITED TO. I'ROC\JREMENT OF SUBSTITUTE GOODS OR SERV ICES: LOSS
OF USE. DATA. OR PROFITS: OR BUSINESS INTERRUPT ION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILIT Y. WHET HER IN CONTRACT. STRICT LI AB ILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF TilE USE O F THIS SOFTWARE. EVEN
IF ADVISED OF THE POSS IBILITY OF SUCII DAMAGE
(5) llbjpeg
T he authors make NO WARRANTY or representation, either express or implied. with respect to this software. its
quality.accuracy.merchantability,orfltnessforapanicu larpurpost:. Thissoftwareis provided'"ASIS", and
youJts uoer. assume the entireri~kas!o it~ quality and accuracy.
This soflw~~rc is copyright (C) 1991-1998, Thoma> G . Lane
AIIRightsReservedexceptasspccifiedbelow.
Permissionisherebygnmtedtouse.oopy.modify. anddislributethissof!ware(orponions!hereof)forany
purpo5e.withoutfee. s ubjectto!Mseconditions ·
(1) If any pan of the source code for !his software is dis11ibuted, then this README fi le must be included, with
thiscopyright andno-warranrynoticeunaltered;andanyaddilioos,dcletions.orcb.aogestotheoriginalliles
mustbeclearlyindicatedinaceompan)"ingdocumeotation
(2) lf on I)" executable code is distributed. then the ac~-ompanying docurttentation must state !hal ""this software i~
baso:dinpanontheworkofthclndepcndcntJPEGGroup""
(3 ) Permissionforus.eofthissofr.wareisgrantedonlyiftheuseracceptsfullresponsibilityforanyun<.lesirable
consequences; the authors accept NO LIABI LITY for damages of any kind.
These conditions apply to any software derived from or based on the UG code, not just to the unmodified li l>rary.
lfyouuseourwork,yououghttoacknowledgeus
Permission i> NOT granted for the use of any lJG author"s name: or company name in ad,-,nis ing ot pub licity
relating to this software or products derived frorn it This software may be referred to only as ""!he Independent
JPEGGroup"ssoftware "".
We specificaH~ permit and encourage the use of this software as the basis of commercial products. provided that
allwarramyorliabilityclairnsareassumedbythe productvendor.
ansi2knr.cisinc l ndedinthi sdistributionbypermissionofL.PeterDcut~h.wleproprietorofi!Scopyright
holder. Aladdin Enterpri'ICS of Menlo Part.. CA. ansi2knr.c is 1'\0T C<»"ered by !he abO\'ecopyrigh l and conditions,
butinsteadl>ytheusualdistribuliontennsoftheFreeSoftware Foundation:principally.thatyoumustinclude
sourcecodcifyouredistribute it. (See~filearu.i2knr.c forfulldetails.)Howeve r,since& nsl2knr.cis norneeded
as part of any program generated from the UG code, this does no! limit you more than Ihe foregoing paragraphs
do
The Unix configuration script ··configure"" was produced with GNU Autoconf. It is copyright by the Free Software
Found~tion but is freely J iwibutablc. The same holds for its supponing scripts (config .guess, cooflg.sub, ltconflg.
ltmain.•h). Another >Upport Kript, install-sh. is copyright by M.l.T. bu!
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
lf youdevelopanewprosram.andyouwanti! tobeoflhegreateslpossibl e uselo thepublic.thebestway!o
achieve this is to make it free software which e~eryone can redistrihtrte and c•hange under !Mse term.•
Todoso, attach the following notices to the program . lt is sa fes! to attach them tothestanofeach source file to
mosteffectivelyconvey!heexclusiooofwarranty:andeachlileshouldha,·eat l ~astth e "'copyright""lineanda
pointeriO"-"hcrethefullnoticeisfound
<onelinetogivctheprogram"s nameandan idea ofwhatitdoes.>
Copyright(Cj<year:> <name of author>
Th is_program is free ~f~ware: ~:~ ~': redis:ribute it"a~~dl~r modify it under ~e ;emt~ ~~the G~~~-~~-~~" 1
i~
also freely distribulllhle
It appears that the arithmetic coding option of !he J PEG tpec is co,·ered by patents owned by IBM . AT&T, and
Mitsubishi. Hence arithmetic cOOing cannot legally be used without obtaining one or more licenses. For !his
reason. suppon for arithmetic ~oding has bee n removeJ from the free JPEG oof!ware
(Since arithmetic coding provides only a marg inal gain over the nnpatented Huffman mode. il is unlikely that very
many implementations will suppon it) So far as we arc a"·are. there are no patent restrictions on the remai ni ng
"'"'
The UG distribution formerly included code to read and write GIFfiles. To avoid entanglemem with !he Unisys
LZW patent. GIF reaJing suppon has been removed altogether. and the G IF wriler has been simplified to produce
"u ncompresscd G IFs"". This technique does no! use the LZW algorithm: !he resulting GIF files are larger than
usual.bu!tu"Cfcadablcbyall!taodardGTFdecodcrs
Wearerequiredtostaterhat
'"The Graphics Interchange Fomtat(c) is the Copyright propeny of ompuScrve Incorporated. GIF(sm) h a
Servi ce Ma rkpropertyofCompuServelncorpornted ""
• • " ' " w~ •..-. ~~ vo ., ....,. """ ~ "''' w ~ a •• "''""'6 w "'~u'" uo u~, oM f"'' ' ' ~w ~ ' """' • u"'" ~,. , ., ., ,, ""
designed tomake<~~reth.alyou havethoe freedom todiS!ributecopiesoffreewftware(andchllf!leforthi'sc rvice
if yoo wish ); that you receive ""urce code or can get it if you wam it; that yOOJ c~n change the software and use
pieces of it inoewfl<'eprograms ; andthatyouareinformedthatyoucandothese things
Toprolectyourrig:hts,weneedto make•estri<:tinn<thatfnrbiddistributnrstodenyynuthc>e rightsorto askyou
to s urrenderthe se rights. These resuictions translatetoccnainl<'sponsibi liries for you ifyoudistributecopiesof
thelibraryorifyoumodifyit
For cumpl e,ifynudi stributecopiesof thelibrary. " ·herhcrgrati>orfor afee.youmustgivetherecipient>allt he
righls thatwe ga>C )'OU. Youmustma kcsurcthruthey,too,rece ive orcanget the sourcecode. lfyuulinkuther
code with the library, you must pro,·i~ complete object fi les to the rec ipien'" · so that they can re link them with
the library after making changes to th~ library and recompiling it. And you must s how them rhe!<t terms w they
kn<>"'thc ir rights.
We protec t your righn with a tw<>-step method: (I ) we cop)'righ! the library, and ( 21 we offer you thi s license,
wh ich gives you legal pcrmissioo to copy, disuibute and/or modify the library. To prote<:t each distributor, we want
In make it •·cry clear that there is nn warranty for the free library. Also, if 1~ library is modified by so meone else
andpassedon, therecipicntsshouldknowthat"'·hattheyha•·e is nottheoriginal,·ersion , so thattheoriginal
author' s repul.lltion willnotbeaffectedbyproble ms thatmightbeintroduced b)' Others
Finally, software patents pose a constant th reat to the exislene<" of any fr~ program. We wi$h to make sure that a
company ca n ~ot effectively resukt the users of a free program by obtaini ng a restrkti ,·e lice nse fJOm a patent
holder. Therefore , we insist that any pmcm lice n~ obtained for a ven;ion of the library mo ot be con ..i sle~! with the
fullfreedomofusespc:cifiedinthis license
Most GN U ~ft"'3re, including some libraries. is covered by the ordinary G NU General Public Li<·en"'. Th is
licen...,, the GNU Les.>er General Public Lice m e, applies to certai n designated libraries, and is quite different from
theordinaryGeneraiPublic License. Weusethis licen>e forcertainlibraries inordertopcrmitlinki ngtho~
librariesintonon-fre..programs
When a program is linked with a library, whether statically or using a shit l<'d library, the combination of the two is
legallyspeakingacombinedwo.t.adcrivati veofth<:originallibrary. T heordi naryG<:oeral PoblicLicense
thereforepermitssuchlinking Miy ifthe e ntirecombinationfits its crite riaoffreedom . TheLesse r GeneraiPublic
Liccnse pcrmi!l;more laxcriteriaforlin kingothercode withthelibrary
Each vctllion is gi~en a distinguishing •·ersion number. If the Library specific~ a ~etllion number of thi< Lieen.e
whic happliestoitand"any la!er•·ersion·•.youhave theoptionoffollnw ingthe termsandcond itionseitheroftha!
versionorofan y lacerversionpublishedbythe Free Soft "·are Foundation. l f t he Li brarydoesnots~ify a l iccnse
~ersionnumbcr, you maychooseanyversioneverpubl ishedbythe FreeSoftware foundation
14. 1fyoo"·ishtoi ncorporatepamoftheLibraryintootherfreeprograms"·hosed istributioncondilionsure
incompatible wi th these, write to the author to ask for permission. For software which is ~opyrighted by the
Free Software Foundation , write to the Free Soflwa re Foundation: we sometimes make exceptions for this
Ourdccisioowillbeguidedby thetwogoalsofpmerviugthefl<'cst31usof allderivat ive sofourfree
12.
softwareandofpromoti ng the sharingandreuseofsnftw~ l<'8enerally
NO WARRANTY
1 5 . BECAUSE T HE LIBR ARY IS LICENSED FREE O F CHARG E. TIIERE IS NO WA RRA NTY FOR T HE
LI BRARY, TO T HE EXTENT PERM ITTED BY APPLICABLE LAW. EXCEPT WHEN OTIIERW ISE
STATED II\' W RITING T HE COP YRIG HT HOLDERS AND/OR OTHER PARTIES PROVIDE T HE
LIBRA RY "AS IS" W IT HO UT WAR RA NT Y OF ,\NY KIND, EITHER EXPRESS ED O R IMPLI ED,
INCLUD ING, B UT NOT LIMITED TO , TH E IMPLIED WARRA NTIES OF MERCH ANTA BILITY AND
FITN ESS FO R A PART IC ULA R PURPOSE. THE E NTIRE RIS K AS TO TilE QUA LIIT AND
PERFO RMANCE OF THE LI BRA RY IS W in! YOU. SHOULD TH E LIBRA RY PROVE DEFECTIVE,
YOU ASSUME TilE COST OF ALL NECESSA RY SERVICING , REPAIR O R CO RR ECTION
1 6. IN NO EV ENT UNLESS REQU IR ED BY APPUCABLE LAW OR AGREED TO IN W RITING WI LL
AN Y COPYR IG HT HOLDFlR. O R ANY OTI IER PARTY W HO MAY MO I)]fY AND/OR
RE DI STR IBUTE THE LI BRARY AS PERM llTED ABOVE, BE LI ABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL. SPECIAL. INCI DENTAL OR CONSEQUENTIAL DAM AG ES ARI SING
OUT OF THE USE OR INA B ILIT Y TO USE T HE LIB RARY (INCLU DING BUT NOT LIMITED TO
LOSS O F DATA O R DATA BEING RENDER ED INACCU RATE OR LOSSES SUSTA INED BY YO U OR
THIRD PART IES OR A FAIL URE OF T HE LI B RA RY TO OPERATE W IT H AN Y OTHER SOFTWARE),
EVEN IF SUCH HOL DER OR OTH ER PARTY HAS BEEN ADVIS ED OF T HE POSS IB ILIT Y OF SUCH
For e\ l tnple, on rare occasioni, there rna~ be aspet:ial need to encourage the widest possible use of~ cenain
library, so that it becomes a de -facto stanllard. To achieve 1his, non·free programs must be al lowed to use the
library. A more frequent case is that ~ free library does the same job as widely used non-free Ubraries. ln this case.
there is linl e to gain by limiting the f= library tO free $Oft ware only, so we use the LesserGe!'«'ral Public Lkense
lnothercases.permissionrouse apanicu l~~rlibrary in non-free programs c nablesa grcaternumhernfpcoplew
use a large body of free software. For eumple. permiss ion to use the GN U C Library in non·fl<'e programs
enables many more people to usc the whole GNU opernting system, as well a~ its variant, the GNU!Linux
opcraungsystem
Although the LesserGeneraiPublicUcen"CisLessprotectivc o f theusetll ' freedom,i t does ensurethattheuserof
a program that is linked with the Library has the freedom and !hoe wherewithal to run that program using a
modified~etllionofthe Library.
How to Apply These Terms to Your New Programs
lfyo~developa,.......· program. and you want ittobeofthegrcatestpossi b le usetothepublic, thebestwayto
achievet bisistomakeitfreesoftwarcwhiche•·eryonecanredisuibuteandchangt:undertheseterms
Todoso . auach t hc followingnntices totheprogr-.un. !ti s safesttoattochthemtothe stMofeach~ourcefi leto
mosteffectivelycon•·eythe u clusion ofwarranty:and eachflleshouldhaveatleastthe "copyright"li ne anda
poi nte r to"·hcrcthe fullnoticeisfound
This program is fr«' softwaw; you can redistribu te it and/or modify it under the terms of the GNU General
PublkLicenseas publishedbythe Free Soft wareFoundation;eithervetllion2oftheLieensc,or(at your
op!ion)any laterver.;ion
How to Apply These Terms to Your New Libraries
This program is distriOOted in the hope that it will be useful, but WIT HOUT ANY WAR RANTY; wi thout
even the impliC<J warranty of MERC HANTAB ILITY or ffi NESS FO R A PART ICULA R PURPOSE. See
the GN U Gene ral Public License for more details
Jfyoode•·e lop a newlihrary. andyouwam it lobeof thegreatestpos&ibleusetothepubli<:,werecommend
making it free soflwa"' that e,·eryone can redisuibute and chitnge. You can do so by perm ini ng JC(iistribution
underthese terms(or. alternatively.underthetermso fthennl inar)· General l'ublicLicensc)
You should ha,·e r~eived a copy of the GNU General Public License along with this program; if no\ , write to
the Free Software Foundation. Joe ., 59 Temple Piau -Suite 330. Boston , MA 0211 1-1307, USA
Alsoaddinformatinn onhowtocontactyouby e lectronic andpapermail
To a pplytheseterms,auachthcfollowingnnliceito thel ibrary. hi s safesttoattachthemtothe stanofcach
If the p10gram is interactive, make it output a shon notice like th i ~ when it stans in an interactive mode:
source fole tomost effectivelyconve)·thee~clusionofwarranty ; andeochfileshou ld haveat l eastthe "copyright"
Thepreciseterms andconditioosf~:>rcopying,dislri botionandmodificruioofollow. Paycloseattentiontothe
differcnce~wecna""'orkbasedonthe library"llllda '"'""kthat usesthe library".Theformercontainscode
deri ~ed
from the library, whereas the latter must be combined with the library in order to run .
T his lihrary is disnibuted in the hope that it will be u~ful , but WITIIO UT ANY WAR RANTY: without e>-en
the implied warranty of MERCH ANTABILIIT or FITNESS FOR A PARTICULA R PURPOSE. See the
GNU Les~rGeneral Public License for more details.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION
AND MODIFICATION
This License Agreement applies to any software library or other program which contain s ~ notice placed by
the copyright holde• orotherauthorizedpanysaying itmay be distributC<Jundertheremrs ofthis Lesscr
GeneraiPublic Liceose (alw called''this License").EilChlicen...,eis addressedas"you"
A •• l ihrary~ means a col!ectioo of software functioos and/or data prepared so as to be con•·e niemly linked with
applic31ionprograms (whichuscsomeof thosefunctioosand data)toformexecutables
You >bould ha•·e received a copy of the G J'I:U Lesser G<'fl~ra l Public License along with this library; if not.
write to the Free Softwa re r'Oundation, lnc .• ~9 Temple Place , Suite 330. Boston, MA 02111-1307 USA
0.
T he "Library", be low, refetll to any such software library or work which has been distributed under these terms. A
"workbasedonthcLibrary~ mean s eitherthelibraryoranyderivative workundercopyrightlaw: that istosa;·. a
workcontainingtheLibraryoraponionofit, either •·erbatimorwithmodificationsandlortran slated
straig:htfurwardlyintoan()(hcrlanguage. ( Herei nafter,translationisincluded"'ithoutli mitationinthet~rm
" mod i fication~.)
Also add information on how to contact you by electron ic and paper mail
You should aloogetyouremployer(if youworkasaprogrammer)oryoursehool.if a ny.tosigna"copyright
disc laimer" for the library, if necess.ary. He re is a s~m ple: alter the names
signatul<'of TyCoon. l Aprill990
T'yCoon .PresideotofVice
That's allttu.reisto it!
Version 2, June 1991
1.
Copyright (C) 1989, 1991 Free Software
USA
ooticeaodd i~l aimerofwarranty;keep i nta~1alltho noticesthatrefer to tbisLicen>eandtotheabse oceof
anywarranty ; anddistribute awpyofthis U cense along withtheL ibrmy
You may charge a fee for the physical act of transferring a copy, and yoo may at your option offer warrant y
prolection ine~change for a fee
2. You may modify yo ur copy or copin of the Library or any ponion of it. thus forming a work based on the
Library.andcopyanddisuibutesuchmodifications or work uadcrthe termsofSection I above , provided
that youalsomeetallof thesecondition.:
T hemodi fied wo rk musritse lfbeasoftware library
Youmustcausethcfilesmodifiedtocarryprominentnoticesstatingthatyoucha ngcd thelilcsandthc
dateofanychange
panie~
c)
You must cause the whole of the work to be licensed at no charge to all third
this License
d)
Ifa facilityinlhemodified LibraryreferstoafunClionoratableofdatatobesuppliedbyanapplication
progr-dmthruuses the facili ty,otherthanasanargumentpasi>edwhen tbefacility is invoked,thenyou
mw;tmakeagoodfaithdfontoensurethat.inth<:eventanapplicationdoesnot supplysuchfunctionor
tabl e,thefac ilitystilloperates, andperforms whateo:erparrol'itspurposcremainsrn..aningful.
under the terms of
(ForeAample,afunctiOJninalibrarytocompute sq uareroots hasapurposethat isentirelywe ll ·defined
indcpendemofthcapplication. T herefore, Sul:>section2drequ iresthat anyapplication· suppliedfonctiooor
tableusedbythisfuncciunmustbeoptional:ifthe application doesnotsupplyit, thcsquarerootfunclion
muststill compute squareroots_)
lltese requirementsapplyto themodifiedworkasawhole.lfide ntifiab lc seClion s ofthat work arenot
de rived from the Library,andcanbereasonablyconsideredind<'P"ndentaodseparateworksinthemselve~.
then thi,License.andit< te rrns,dnnnt apply tothosesectionswhe n youd istrihutelhemasseparateworks
But when you distribute the same sections as pan of a whole "·hich is a work based on the Libo.11y. the
distribution of the whole must be on the terms of this License, whose pern1issions for oth~r licensees extend
tothe entire wh nle,andthus toeachande>·erypart regardlessofwhowrote it
Thus, it is not the intent of this section to claim rights orcomest your rights to work writlen entil<'ly by you : rather,
!heinttntistoexercisetherighttocontrolthe distributiono(deri•·ruive orcollecti\'eworks ba>edonthe Library.
In addition, mere aggregation of another work not based on the Library with the Library (or wilh a worl< based on
!heLibrary) ona volume ofastorageordislribulionme<liumdoesnotbringthcother work onderthe seopeof this
Lic.., nse
3.
You may opt to apply the terms of the ordinary GNU General Publ ic License instead of this License
to
a
evenbe mouse-cl i cksor menuitems-- whate•·ersuitsyourpro~ram
You should also get }'<)Ur employer (if you work as a programmer) or your school, if any, 10 sign a ··copyright
di,;d a imer" for the program, if necessary. Here is a sample; alter the names·
Yoyodyoc, Inc., he~<'by di~oelaims all copyright intel<'st in the program 'Gnomovision · (which maks passes
at compiletll)wriuenby James Hacker
Gig natureofTyCoon>. I Aprill989
l)'Coon. PresidcntofVice
ThisGeneralPublicLicenscdoes notpcrmitincorporntingyoorprogramintoproprietaryprogra ms. lfyour
programis a subroutine library, youmay consideritmOieusefultope rrnhlin kingproprictary a pplicationswith
the li brary. If this i• what yoo want tn do, use the G NU Library General Pub Uc Lice nse instead of this License
One<" this change is rna~ in a given copy, il is irre•·etll ible for that copy, •o the ordinary GNU
Lice nseappl iestoallsubseqoentcopiesandderivative worhmade fromthat copy
Gener-~1
Public
executable form under the tcnns of Sections I and 2 above prn•·ided that you ae<:ompany it with th<: comple te
wrrespondi ngmachine -readablc soorcecode, whichmustbedistributedunderthetermsofSections la nd2
above on a rMdiu m customarily used for software intercbange
lfdistri bu t ionofobject codei s madebyoffering accesstocopyfroma~signatedplace,thenoffering
cquivalentac.:ess tocopy thesourcecode fromthe samepl,...sati sfies then:<[uiTememtodi stributethc
sourcecOOe,eve nthoughthirdpartiesarenotcompclledto copythesourcealongwiththe objectcode.
5. A program thai coma ins no derivative of any ponion nfthe Li brary. but is designed to work with the library
by being compiled or linked with it, is ca lled a "work that uses the Libral)'". Suc h~ work. in isolation, is not
a de rivative ...·orkof theLibrary,andtherdorefallsoutsidethe>eope ofthi s License.
Ho"·ever,linkinga""·ork thatusestheLibrary'· withtheLihmrycrl'atesanexecutablcthat isaderi•·ati.-eofthc
Li brary (becauseitcontain~ponlons oftheLibrary),ratherthana"workthatusesthelibrary".The ex~utahlels
therdore co •·ercdby thi > License. Scction 6 stales terms for di stribution nfsuch e •ecuta~les
When a "work that u.es the Library" u>es mate rial from a header file !hat is pan of the Library, the object code for
the work rna)· be a deri\lllti>-e work of the Library even though the source code is not . Wh~ther this is true is
especially s igni ficamifthe"'"rkcanbelinkedwirhouttheLibodf)', ori f thework is itse lfalihrary. T he threshold
forthistobetrue isnnlpreciselydefinedbylaw.
Redistril:uti onsinbinaryformmustreprod!JC(:theabovecopyrightnnt ice, thislistofconditionsandthe
followingdi>claimer in the docume ntationandlor otherrnatcrial&providedwilhthedisuibution
Ne ithcrthename oft beXiphmg FOIIndationnnrthenamesofitsconuibutotllmaybeusedtoendotseor
promotcproductsderived fromthissoftwarewithoutspecificpriurwriuenpermission
TillS SOFTWA RE IS PROVIDED B Y 11-IE COPYR IGHT HOL DERS AND CONT RIBUTORS ~AS Js·• AN D
ANY EXPRESS OR IMI'LJED WARRAN TIES, INCL UDING . B UT NOT LIMITED TO. THE IMPLIED
WARRANTIES O F MERCHANTABILITY AND A TN ESS FOR A PA RTICULAR PU RPOSE AR E
DISCLA IMED. IN NO EVENT SHALL TilE FOUN DATIO N OR CONTRIBUTORS B E LIA BLE FOR ANY
DIRECT, INDI RECT, INCIDENTAL, SPECI AL, EXE,'1.1PLARY, O R CONSEQUENTI AL DAMAGES
{INCLU DING, BUT NOT LIM ITED TO, PROCUREMENT O F SUBSTITUTE GOODS OR SERVICES; LOSS
OF USE, DATA, O R PRO ATS: O R BU SINESS 11\'ll:RRUPT ION ) HOWEVE R CA USED AND O N A NY
T HEORY OF LIA BILIT Y, WHETH ER IN CONTRACT. STRICT LI ABILITY, OR TO RT (INCLU DING
NEGLIGENCE OR OTHERWISE) ARIS ING I N AN Y WAY OUT O F THE USE OF TI-llS SOFTWARE. EVEN
IF ADVI SED OF THE POSS IB ILITY O F SUC H DAMAG E.
(7) 11bpng
COPYR IG HT NOTICE, D ISCLA IMER, and LICEN SE
If you mod ify libpng you may insen additional n()(ices immediately following this sentence
libpngve1Sionsl.0.7, July 1.2000, through 1.2.~ - O.:toher 3, 2002,areCopyrigbt(c)2000-2002Glenn RandersPehrson, and are distri buted accordi ng to the same disclaimer and license as lihpng-1.0.6 with the following
Place - Suite 330, Bostoo, MA 0211 J- 1307,
3
indiv idualsaddedtothelistofContri tutingA u tho~
Simon- Pierre Cadieu x
libcurl
11\ere is 110 "'arranty against interference wi th your enjo}ment of \he library or against infringement. There is 110
"'3rrantythatour effortsorthclibrarywi ll fullillanyofyourpanicularpurposesornceds.lltislibraryi s
providedwith al l fauhs,aodthe entire risk ofsatisfactoryquality,performance, accuracy,andeffoniswith tbe
libjpeg
6.
libogg
7.
libpng
=
libpngveN>ions0.97, January 1998,through 1.0.6, March 20,2000,areCopyright (c) 1998, J999 GlennRandersPehrson.andaredistributedaccordingtothesamedisclaimer andlicenseas libpng-0.% , with thefollowing
Preamble
The licenses for most software are de..igned to take away your freedom to 'lhare and change it. By contrast. the
GN U General Public License is intended to guarantee your freedom to share and change free soft"·are-- to make
wrethc soft"•are is free forallitsuser.;. This GeneraJ Public Li<Xnseappliestomost ofthe FreeSoftware
Fou ndation 's software and to a ny other program whose author,; co mmit to using it. (Some other Free Software
Foundation soft" are is co ..e red b)· the GNU Library General Public License instead.) You CllJI apply it to your
programs, too
When we &peak of free software, we are referring to fru.:lom . not pri"". Our Ge neral Public Licenses are designed
!Omake sul<'thatyouhavethe freW<.>mtodistributecopies o ffreesoftwal<' (andcharge forthisserviceifyou
wis h), thatyourecei>·e sourcecodcorcangetit ifyou"'3ntit,thatyoucanchange thesoftwareorusepieces ofit
inncw freeprograms; andthatyou knowyoucandothesethings
To prntectyourright•, we ncedtoma~e ~<'stri<:tionsthatforbidanyonetndeny youthe&erigh!sortoaskyouto
surrendertherights . Theserl'strictions trnnsla tetocertainresponsibil itiesfor yooifyoudistributecopiesoftbe
software,orifyoumodi fyi t
Fore~amplc, if youdistributecopiesof suc haprogram."·hc ther gratisorforafee,you mustgi,·ethel<'cipie nrs
all the rights thitt you have. You must make ~ure that they. too, receive or can gel the sou reo= code. And you must
showthemthese terms sotheyknowtheirrights
We prutectyour righ'"withtwosteps: ( llcopyrightthesoftware,and(2) offeryouthi s licensewhichgives you
legalpermi ssionlocopy, di stribute andJormodify thesoftwal<'
Also.foreachauthor 's protectionwtd ouN>."'e wa nttomake cenai n thatcveryoncunderstands thatthereisno
warranty for this free software. If the w ftware is modifiC<J by wmeone else and passed on. we wam it~ recipients
to know that whattheyha•·eisnol lheoriginal,sothal anyproblemsi ntrodUl·edbyothers witlnotn:nectonthe
ori ginal authors' reputations.
individualsaddedtothelistofConuibu tingAutho~ ·
"''
10. OpenSSL
II
popt
12
RSA Data Security, Inc. MD5 Message-Digest Algorithm
13
thUpd2.25b
"
I~
libpng ver.;ions0.89 , June 19%, through 0.96, May 1997, are Copyright (c ) 1996, 1997 Andreas Di lger
Dist ributed ae<:ording to the same disclaimer and licen se aslibpng-0.88 . with the following individuals adokd to
the listofContributingAuthors
Appk Lossless
Kevin Bracey
16. Boost
Sam Bushell
17
Expat
18
FastDelegate
Magnus Holmgren
G J<'g Rnelofs
libpngversionsO..'\, May 1995, throPgh0.88,January 1996.areCopyright (c ) 1 995.J996GuyEricSch~lnat.
Group42 ,l nc
For the purprn;es of this copyright and license, "Contributing Authors~ is ~fined as the following se t of
indi,·iduals
20 . Tre mor
"22
Theprecise tcrms andconditionsfor oopying,distribut ionandmodificati ~:>nfollow
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION
AND MODIFICATION
GuyEricSchalnat
Paul Schmidt
SIJ J:"f.
Ti m Wesner
The PNG Reference Library is supplied "AS I S~- The Conlributing Aut hotll and Group 42. Inc. disclaim all
warranties. expressed or implied. including. without lim itation, the warranties of men:hantability and of filness for
any purpose . The Contributing Authors and Group 42, Inc. as'ume no liability for direct. indirect, incidental ,
special. e~emplary, orcoosequ ential damages, whic h may result from the use of the PN G Reference Library. even if
advisedofthepossibilityofsuchdarnaboe.
1
Pe rm iS<ioo isherebygrantedtouse, copy,modi fy,anddistributethissourc~cod~.or portionshereo f.forany
purpose.withoutfee. subjecttothefollowing re.suictions;
*t:! llii i<: IJ-~ttmf'; .:::: ~&:: o illlilr:II <: Xrcutll*e':ll<=lfm O) If'ii'l'~ r1 t::. T ~ './7
b fs h -sk
ixm l
libc u rl
0. This License appl ies to any program or ot her work which conlains a notice placed by the copyright holder
sa}ing it ma y be distributed under the terms of this Ge neral Publ i<· License . The "Program~ . below, refers to
any su<· h program or worl< . and a "work ba.•ed on the Program" means either the Program or any derivati•·e
workundercopyright law:thati s to say,a••r<lrk c otttainingtheProgramor aponion ofit, e ithcrverhittimor
with modifications and/or translated into anoth~r language. (Herei nafter, tran~lat ion is included withoLII
limitationinthetcnn"modification".)Eachlicenseeisaddres.edas"you"
Andreas Di lger
Dave Martindale
In response to requests from the copyright owners of eoch piece of software, Onkyn notifies you of the following·
Finally,anyfreeprogram islhreatcnedcon standyby snftwarepatents. Wew ishtoavoidthedangerthat
redislributors of a free program will individually obtain pa~nt licenses, in effect making the program proprietary
~~~prevent this, ..,.e have made it clear that any patent must be licensed for everyone's free use or not licensed at
libF LAC
libioes:
6
7
8
libp n g
Ad ivities other than copyi ng, d i>uibutinn and modification arc not cove red h)' !h is License; they are outside its
scope.TheactofrunningtheProgramis notl<'strictcd, and!heoutplJ(frorn theProgrami s coveredon lyifits
contcms constitute a wOJk based on the Program (independent of having been mude by running the Progr-Jm )
WhttherthmistroedependsonwhatlheProgramdoes
9
n tp
Yo u may copy and distribute ~erbatim copie' of the Program's wurcc code as you recei•·e it, in any mediu m.
pro~ided that you conspicuously •nd appropriately publ ish on each copy an appropriate copyright nntict and
disdai merofwarranty;keepintoctall !he notkesthatrefertothisLicenseandto theabsence ofany
warranty;andgivcanyotherrecipicnts ofthcf'rogramacopyof this LicensealongwiththeProgram
You may chitrge a fee for the physical act of transferring a ~-opy, and you m•y at your option offer warrJnty
protectionineAchangefor afee.
2. You may modify your copy or copies of the Program or an)' ponion of it , thus forming a work ~ on the
Program. and copy and di slribute such modifications or work under the terms of Section I abo•·e, provided
thatyooalsom.,..t a llofthesewndi tinos
12. RSA Data S e cu rit y . In c . M05 Mess a e:e-O ig est Al g or ithm
13. thttD d 2 .25b
1.
Copyrig:ht(c)2002,Xiph.org!Vundation
Redisuibutioo and use in source and binary forms, with or withoot modification.~ permitted provided that the
foll<>"ingconditionsaremet:
- Redistributionsof sourcecodemustretain theabo•·ccopyrightnot ice . th is li st ofconditions andthe
fo ll.,....ing disclaimer.
andwiththe followingadditionsto thedisclaimer·
Foundation . l nc.~9 Temple
Everyone ispcrmiuedtocopy anddi~uibute verbruimcopiesofthislicensed«.· ument.but changingiti s not
4 . Youmaycopyanddi>tribute!heLibrary(oraportionorderivativeofit. underSection2)inobjectcodeor
"The Graphics Interc hange Format(c) is the Copyri ght propeny of ompuServe Incorporated. GIF(sm) is a
Scrvice Marltpropen yofCompuServe lncorporated"
(6) libogg
ErieS. Raymond
Gilles Vollam
allowed
Thi•optionis usefulwhenyouwishtocopyparrofthecodeofthe Libraryinto~programthatis 110t alibrary.
The UG dilotribu tion formerly included code to read and write GIF files. To avoid entangltment " 'ith the Unisys
LZW patent, G IF read ing suppon h~ been removed altoge ther, and the GIF writer has been s implified to produce
"uncompl<'ssed G IFs". This technique does nnl use the LZW ~lgorithm: the re~;ulting GI F fi les are larger than
usual . but are readable by a ll ~tandardGIFdecoders.
We arerequired tostatethat
libpngvetllions 1.2.6,August15,2004,through l .4.0, Janoary3,20 JO,are C opyright(cl 2004 , 2006-2007Glenn
Randen-Pehrson, and are distribu ted according to the ~arne disclaime r and license as libpng-1 . 2 .~ with the
following individualaddedtothelistofContributingAuthors:
Thisproductincludesthefollowingroft ware thatisdirectlyorindirecdylicensedto Onkyobythird- pany
developers
gi•·encopyoftheLibrary.Todoth i s, youmustalteralltheno~ces thatrefertothis License, wthat they refer
to the ordinary GNU Ge neral Public Licen se. \'Cr.;ion 2 . instead oftOJ this License. (If a n~wer •·crsion than
vcrsion2oftheordinaryGNUGenera1 PublicLicensehasappcared, thenyoucanspecifythatversion
insteadif)'Ou wi sh.)Du notmakeanyother chitnge inthese nntices
It appears that the arithmetic coding optio n of the JPEG spec is covered by pate nts ""' ned by IBM . AT&T, and
Mi'"ubishi. Hen"' arithmetic coding cannot legally be u~d without obtaining one or more licenses. For this
reasoo,supponforarithmcticcod iog hasbeen removedfromthefmJPEGsoftwtlre.
(Since a rith metic coding provides only a marginal gain over the unpatented Huffman mode, it i~ unlikel y that very
=implementations will s uppon it. ) So far as we are a ware, there are nn p~tent resnictions on the remaining
T hisoode is releasedunder thelibpoglicensc.
Notice Regarding Third-party
Software
GNU GENERAL PUBLIC LICENSE
;.:;ng
Youmaycopy anddistributevcrbatimcopies ofthcLibrary'scomplctcsourcecodeasyoureceiveit,in any
medium . pro,·idcdthatyouCOnipK:uouslyaodappropriatelypub lishooe:Kh copyanappropriate cnpyright
The hypothetical 'om ma nds 'show w' and 'show c ' should show lhe appropriate parts of1he Gen.ral Public
Licen.e . Of course, the commands you u~ may be called romething ()(her !hart ' show w' and ·s how c' ; they could
Yoyndyne, lnc.,herebydisclaimsallcopyrightinterestinthelibral)' 'Frob'(alibral)'fortweakingknnbs)
writtenbyJamesRandomllacker.
"Sou.u code" for a work means the preferred form of the work for making modifications to it. For a librn!)·.
complete source code means a ll thesoorcecodeforall module5itcontains,plusanyassociated interface
definition files. plus the scri pt~ used tocO!ltrol compilation and installation of the library.
Activiti('!; othe r than copy ing. dh.uibution and modification are not covered by thi ~ Licen~e; they are o~tside its
scope . The act of running a program using the Library i ~ n~ restricted, and output from such a program is covered
onlyi f itscomentsconstituteaworkbasedontbeLibrary(indepcndentof theuseof theLibraryinatoolfor
it). Whe ther that is \I\fe depends on what the Li brary~ and what the program that u se~ th~ Library
Gnomovision version 69, Copyright (C) year name of author G nomo•·ision comes wilh ABSOLUTELY NO
WA RRANT Y; for de tails type 'show w' . This is fre.. software, and you are we lcome to redi stribute it W>dcr
cenai n <'Unditions;type ' show c'fordetails
is found
<one li ne to givt the libra ry·~ name and an idea of what it doc~.>
Copyright(Cl<year:><nameof author>
T his library is fr"" software : you can redistribute it and/or modify it unde r the terms of the G NU Lesser
Generai Public Licenscas publishedbythe FreeSoflwarer'Oundali~:>n;eitherversi on 2. 1 of the License , or
(atyou r option)anylater vetllion
ansi2knr.cisi ncludedint his disuibutionbypenniss ionofL. PeterDeutscb, .oleproprietor ofitscopyright
holder, Aladdi n E nterprises of Menlo Park, CA. ansi2 knr.c is NOT cnvel<'d by the abo•·e copyright and conditions,
buti nsteadbytheusualdistri butiontermsoft he FreeSoftware Foondation;pri ncipaU y. that you mustinclude
sourcecode ifyouredisuibuteit (Seethefilcansi2knr.cfor fulldetails.) Howe,·er, si ncearu;i2knr.cisnotneeded
as pan of any program genera1e d from the JJG code. this does not limit you more than the foregoing paragraphs
do.
ltmain.sh). Anolhersupponscript.install-sh , iscopyrightby M.J.T. but isalsofreelydistri butable .
END OF TERMS AND CONDITIONS
END OF TERMS AND CONDITIONS
noti~e
We specifically permit and encoorage tbe use of this wftware as the bas is of commercial product!; , prm·ided that
all warranty or liabi lity claims are assumed by the product vendor.
Foundati oobutisfrcclydistributable. Thesameholdsforitssupponin gscripts(config.g~~.coofis.sub, l tconfig,
<o l'le linetogi•-e the program's na me and anideaof whatitdoes.>
Copyright(C )<year> <n ame of author>
line and a pointer to where the full
con;.equcnccs;meaut nor•acceprr.vuADII.Ji l torua ma gcso t any ~<. onu .
These condit ions apply to any ""ftware derived from or based on the UG rode, not just to the unmodi fied libn1ry.
lfy()o useour work. youought toacknowledge us
Perm issiott is NOT gran ted for the u~oe of any IJG author's name or company tllf.me in adven i,ing or puhlidty
relating to th is software or produc ts derived from it. This software may be referred to only as ''the Independe nt
JPEGGroup'ssoftware"
The Unix configon1tion scripl"configure" was produced w ith GNU Autoconf. It is copyright by the Free Software
Wecallthis licen!oethe"Lesser"GeneraiPubhc Licensebecauseitdoes Lcsstoprotectthe uscr's fr~dom than
theordinaryGeneraiPublic License.ltalsoprovidesot herfreesoftware de~eiOpcrllLess ofanadvantage over
competing non-fre.. programs. These di sath •antages •re the rea son we use the ordinary General Public License for
many libraries. However, tlte Le~ser license provide~ ado·antages in certain special circumstances
INCLUD ING, BUT NOT LI MITED TO, THE L\lPLI ED WARRANTIES OF MERCH At.' TARIUT Y AND
FITN ESS FOR A PA RTICULA R PURPOSE . T HE ENTIRE RIS K AS TO T HE QUA LITY AND
PERFO RM ANCE OF TilE PROGRAM IS W ITH YOU. SHO ULD T HE PROGR AM PROVE
DEFECTIV E, YO U ASSU ME TilE COST O F ALL NECESSARY SERVICI NG. REPA IR O R
C ORR ECTION .
IN NO EV E NT UN LESS REQ UI RED BY APPLIC ABLE LAW OR AGREED TO IN W RITING W ILL
AN Y CO PYRIG HT HOL DER . O R ANY OTII ER PARTY WH O M AY MODIFY AND/OR
RED ISTRJR UTE THE PROGRAM AS PER.'-lilTED ABOVE, BE LIABLE TO YO U FOR DA MAGES,
INCLUDI NG ANY GENERAL, SPECIAL, INC IDENTAL O R CONSEQUENTIAL DA MAGES ARI SING
OUT OF Til E USE O R INA BILI T Y TO liSE T HE PROGR AM (INCLUDI NG BUT NOT LIM ITED TO
LOSS O F DATA O R DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU O R
T HIRD PARTI ES O R A FAIL URE OF T HE PROG R AM TO OPERATE WITH ANY OTHER
PROGRAMS), E VEN JF SUCH HOLDER O R OT HER PARTY HAS BEEN ADV ISE D OF TilE
POSS ll:l lLITY O F SUC H DAMAGES
ribo s s:
libvorb is
1Q_ Ooe nSS L
1 1.DOPt
l 4 _z lib
15 .Aoole Lossless
l S.Boost
1 7 .Exoa t
l S. FastDelegat e
1 9. T re m o lo
t- ?
I r tr~i1n-r
1.
2.
3.
Theoriginofthissnurcecodemust~otbemisrcprcsentcd
Altered versioos must he plainly marked as such and must not be misrepresented a~; being the original soul\.'e
Thi s Copyright notice may not be removed or altered from any source or altered ~ource distribution.
The Contributin g Authori and Group42,1nc. specifically permit, without fee. and encoorage the use of this ~ource
code.- as a compon~ nt to suppon ing the PNG fik format in commercial product~. If you use this source code in a
product,acknowledgmenti.<n()(requiredbutwouldbeappreciatcd
(8) libvorbis
Copyright (c l2002-2004X iph .org Foundation
Redistribu tion and use insourceandbinaryforms, wi1hor without
followi ng conditions are met
modifi~ation ,arepcrmittedprovidedtha t t h e
- Rcdistributionsofsourcecodemustretaintheabo•ecopyright notice, thi s list ofcondition s andthe
followi ngd i>elaimc1.
-
Redistributions in binary formmustreproducetheabove copy rightnntice ,thi~ list ofcondition s
following d isclaimer in the documentation and/or other material • prm·ided with the d isui hution
andthe
- Neither the name of the Xiph.org Foundation nor the names of its cuntributol'i may be used to endor,;e or
promote products derivC<J from this so ftwal<' without spc:cific prior "·ritten permi~sion
T HI S SOFTWA RE IS PROVID ED BY T HE COPYR IG~IT HOLDERS AND CONTR IBUTORS "AS IS" AND
AN Y EXPRESS O R IMPLI ED WARRA NTIES, INCL UDING, BUT NOT LIMITED TO. T HE IMPLIED
WA RR ANTI ES OF MERC IIA NTAB IUT Y AND FITNESS FOR A PARTICULA R PU R POSE AR E
DI SCLA1).1 ED. IN NO EVENT SHALL TilE FOU N DATION OR CONTR IBUTORS BE LI ABLE FOR AN Y
DIRECf, INDIRECT,INCIDEN'fAL, SPEC IAL, EXEMPLARY. OR CO:-ISEQUENTIA L DAMAGI!S
{I NCLt:DING, Bl~T ~OT l.IMITED 10. PROCUREMENT OF SUBSTITUT E GOODS OR. SERVICE.->
' ; LOSS
O F USE. DATA, O R PROFITS; OR BCSINESS INTERRUPTION) HOWEVER C AUSED AND 0 1\ AN Y
THEORY OF LIARIU TY, WHF.THER IN COI\TR ACT. STRICT liABILITY, O R TORT (INC UiDIJ\"G
NEGUGENC E O R OTHERWISE) ARISING IN ANY WAY OUT OF T HE USE OF THIS SOnWAJU:. E VE N
IF ADVISF.D O F THE POSSIBILITY O F SUCH DA MAGE
(9)ntp
Thi~
file i~ l ummatic ally generate(! fmm htmllcopyright.hu n l
Copyright~oticc
jpg "Oone me," says Dolly sheepishly
Last upd~te: 20:31 UTC Smord~y. January 06, 2007
1lle followinjl copyright notice ~pplies to all files collectivel~·
Di•tribution.
c&l1ed ~ Network Tome Pro tocol Vonioo 4
was
Unl~'" 'P"cificallydl:clan:d <Mhcrwi.e inKnindividual fil e, thi~ mlliccapplies as if thete.oot
e.~<plicitly inclllded inlhelile.
Copyright (c) lla~idLMills l 992-2007
Permission to use, ropy. modify, and distribute this .oft ware antl its documenunion for any pt.u pt"" with or
witl>nutfee isberebygnmted,providedthlltthe abol.·ecopyrighl noticeapP"atS in all ropiesand th&l both the
copyrightnnti<:<:: andthispcrmission noticcappcar in s upporting documcntation. a nd that the name
Urliversity of D.!la,....re not he u1ed in advmising ~ publicity pmaining to distriOution ...rthe roftwarc:
w ithout Sp«'ifk, wrinen pri~ permission. The Uni~ersity o f Do:lawan makes no rtpresentation5 about the
suitability this SQftware for any purpose. It is provided ''a$ i$'' without exprh~ or implied wam111y
1loe following ind i•·idu.als contributed in part 10 the
~etwork
Time
Proto~ol Di~tribution
Version 4 and are
actnow!ed~d uauthor.l ofthis work.
1
[!]Mark Andrews <mark_~ndr~ws(iisc.oqp Leiu:h atomic clock controller
2.
3.
[2]B emd Altmeier <Wtmeierlii'~tlsofi.dc> bopr £ kktrunik serial line and PCI· bu§ device•
[3]Viraj Bllis <>h<lis@lmlilfllllnl .intcl_c ,.,>lll1d [4]Ciayton Kirkwood
<kirkw<>Od@.niderfm.inll:Lcom> pon to WindC>W<NT 3.5
4.
[5]Michael Barone <michael,barone~Jmco.com> CPSVME fixes
5.
/6]Jean-Fraucois Boud~aul! <lean-Francois.Boutlreauh@viagcnie .qc:.c a>IP'·6 s upport
6.
7.
!7]Karl Berry <karl@owi.HQ.ilu f.com> syslog 10 file option
[8]Gt'eg Brae~ley <grcg.brackley~higfoot.com> Major n:work of WINN T port. Clean up ruv buf and
itKignal codeiniO separatemodules.
8.
[9 ]Marc Brett o:Marc.BreU@westgeo.com> Magnavox GPS d ()Ck driver
[I O]Piete Brooks <Piete.Brooks@cl.cam.ac.ub MSF clock driver, Trimble PARSE ~uppu<t
10. [ll]R~g Clemen> <n:g@dwf.com> Oncore driv~r (Current mai~tainer)
11. [1 2JSte~e Clift <clift@ml.tiiro.au> O MEGA cl()Ck driver
9.
12. [ J3]Casey Crellin <' asey@-cSo::.oo.za.> HWod~ (Tornado) port u d help w ith target oonfigur.u ion
1 3 . [ l4]Svcn Dietrich <!ven_diell'kh~hrimble:.com> PaliiMle n:fereoce clock dri,·er, NT adj . ruid ..als.
imegrat«!Gteg'sWinnt port.
14. [ l .'i]John A. Dund.os Ill <dundas@salt.j pl.nasa.g<>v> Apple AIUX pori
15. 116)Thr.;ten Duwe <duwe@immd4.informalik.uni~rlangen.de> Linu~ port
1 6 . [ 17]Denni< Ferguson <dennil @mrbill.canct.ca> fou ndation code for NTP Ver;ion 2 ~ specifoed in
RFC -111 9
17. [ 18]John Hay <jhay@>comtek.Clir.co.za> IP\·6 s upport and testing
18 . [ !9]Gl~nn Hollinger <glenn@bcrald.usask.ca> GOES d ock dri,-cr
19. 120[Mike Jgle.ias <ig le•ias@ud .edu> DIOC Alpha port
20. [2l]Jim Jagielski <jim@jagubox .gsfc.na~a.go-.·> A/UX port
21 . ]22]Jeff Johnson <jbj@chatharn.usdel.ign .com> m~ive protOiypin~ o~erllaul
22. 123]Hans LAmbcrmont <Hnm.Lambermont@nl.origin-it.~um> or [24)<H.Lambcnn01ll@cbcllo .nb
nlp$wtep
23. [25]Poul-He-nning k amp <p hk @Free BSD.ORG> Oncore driver (Originlll lll!hOf)
2 4 . [26)Frank Kafdel [27)<kardel {at) ntp {dOI)org> PARSE <GENERIC> driver (> 14 reference c loch),
SfREAMS modules for PARS F., support s.;:ripu. syslog c leanup, d ynamic intcrfiCe hlndling
2 5 . [28]Wi11iam 1.. Jo~s <jones @h~hpc.ull:XAS.edu> RSf6000 AIX modifications. HPU X
modifications
26. [29]Davc KatL<dkatl @cisco.com> RS/6000 AIX port
27. [30]Craijl Leres <leres@ee.lbl.gov:> 4.4BSD ji<Jit. ppsclock. MagnavoxGP S d ock driver
28. [J I]Geo~e Lindholm <lindholmltucs.ubc.ca> SunOS 5.1 pori
29. [~2]Luui< A. Mamakos <1ouie@n.i.umd.cdu> MD5-ba-;ed authentication
30. LB ]Lars H. M•thiescn <thc rinn@d itu.dk> adaptation of fouodatkln code for Version 3 BS specified in
RFC- 1305
31 . f341Danny Mayer <mayer@ntp.org>Nctwork 110, W indow $ Port, Code Maintena~~tt
3 2 . {35]David L. Mill• <mi lls@udel.cdb> Vcn ion 4 foundation: clock discipliM, authmtic.>tiun, prrci~ion
kernel; clock drivers: Spcctracom, Austroo, Arbiter, Heath, ATOM, ACfS. KSI/Odetiu; audio clod.
driver~: C H U, WWVfH, IRIG
3 3 . [36]Wolfg•ng Mocller<moc:llcr @gwdg v l .dnet .gwdg.de> VMS port
34. [37]Jd frey Mogul <mog~~l@pa.d«'.oom> ntptrace utility
3 5 . [38 ]Tom Moon: <tmoore@flcvel.daytonoh.ncr.com> i386 svr4 port
36. [ 39]Kamal A Mustafa d.amal~whenee.com> SCO OpcnServcr port
3 7 . 140]Den:k Mulcahy <den:k@toybo~.dcmon.co.uk.> and [4 1]0Mmon Hart-Davis <d@hd.org;> ARCRON
3.
All ad¥cn is ing Allllerial~ mentioning features or u"' of Ibis soft,.·arc mu ll di~play the following
acknnwl<:dge""'m: "Eric Young (e~ytih'ryplwft.com)M
OJ
any atid "II lllher c ommerci;aJ Ibm ages or Jos<.es), c,·en if such Contrihutor has been a<h ·ised o ft he
NEGLIGENCEOR OlliERWISEl ARISIC'<G IN A NY WAY OliT O F T HE USE OF THIS SOFT\\'ARE. EVEN
IF AP VJSEO Of TI-lE POSSJBJLJTY OF SUCH DAMAGE.
pos>ibilityof ~uch tlamagn.
Th~word ·cryplogJaphic' ean bek-flout iftherwine, frum thelibrary being used iUCnt>tcr)·ptogr•phie relaled
:-).
If you include ao~· W indows spe.::ilic code (or a deri\'ati\'e thereof) fmm rho: apps directory (applicatiou wde)
you m~t ind lllk ~n ocknowledge ment: "This prudu't includes software wrin~n by Ttm Hud~nn
( tjh @cryJ)ISQft.com)"
TillS SOFTWARE IS PROVIDED BY ER IC YOUNU "AS IS" AND ANY EX PRESS O R IMPLIED
WARRANTIES, I NCLU D1.'4G, BUT NO!' LIMJTEO TO, 'rttli IMI'liED WA RRANTIES OF
MF.RCHANTA RJUTY ANO fiTNESS FOR A PARTICUL AR PUR POSE. ARE DJSC LA IMF.O . IN :-10
EVENT SHALL THE AUTUOR OR CO NT RIBUTORS BE LIA BLE FOR A!\Y DIREC T, INDIRECT,
INCIDENTAl ~ SPECIA L EXEMPLARY, OR CONSEQUE NTIA L DAMAGE.' i {INCLUDING, Rl!T NOT
LIMITED TO, PROCUREMENT OF SUBS1Tl'UTE G{X)[)S O R SERVICF-'i; LO SS OF USE, DATA. O R
PROFITS; OR Bl:SII\ESS lNTERRU?TIO ~) HOW EVER CADSED A ND O N ANY T HEORY OF U A BILITY,
WIIETJIER IN CO:'>'TR,\CT, STRICT LIABTLITY, OR TORT {INCLU DING NEGLIGF )';CF. O R
OTHERW ISE) ARISING IN ANY WAY OUT O F TI-lE USE O F Til lS SOFTWARE, E VE:>.' lF ADVISED O F
THE POSSffiiLITY O F S CCH DAMAG E
9.
(20) Tremor
Ac(e pting Warmnty or Additional Liability
hnp:/lwiki.~iph.orgfindu.php!Tremor
4.
While red imihming the Work or Dcrivati~e Works the reof, You
l.icen<.e. Howe ver, io a<:(cpting soch obli£ations. You .nay a~t unly un Your own behalf a ntlun Y<>w sole
re~pon~ihi! ity, 00{ nn llehalf of an)· Olh~ Coo u ihutnr, anrl only if You agree to indemn ify, defend. and hold
each C onrributor hann less for a ny liabilit)' incun ed by, IH daims "'"'rted ag;.inst, sut:h Contributor by reason
nf )·nuracccpting anysu.:h wiiiTantym additional li ahility
lb apply the Apache License to your worlc, atmeh the following boilerplate nolke , with 1M lit Ids enclosed
h)' brackcH "II" rc pii!Ced " ·ith your own identifying information . (Don' t include the br.ocket§!) The te u
should OC c ndoscd in the appropriate comment ~~ntilx for the file fonnat. We a ls-o recommend that a file or
(11) popt
c1a.<s name anddescriptionofpurposebeincludedon the .<ame~primed>'I'Se"as the topyright0Jl(ieefor
Permi$~ionis hercbygrantcd, free of clla.rge, to any po:ts.on l.lbtaining a ropy of thiss.oflwm an<J a• ...xi~tcd
documentation file$ (the ..Softw:ore"), 10 deal in the Sofrware "''ithout ~triction, includina without limitation the
right~ to u.e, copy, modi!)-·. merge , publish. distribute, sublicen\e, a nd/or sell copies o f tho Software. und tn permit
persons rowhornthc:Software is furnishcd todo !o, subjo.'Ct to tllt lo llowingconditioos:
The a hove copyri~ht n011<:e and this permission notice $hall tJ.c, included in all copies or ~uh~tantial porti<>M of the
Software.
T HE SOFTWARE IS PROV IDED "AS IS", WITHO UT WARRANTY OF AN Y Kl!\'0 , F.XPRESS OR
IMPLIED. INC LUDING BUT :"OT LIMITED TO TilE WARRANTIES OF MERC HANTABILITY. FITNF-<iS
FOR A PARTICULAR PURPOSE AND NON!Nt'RING EMENT. lC\' NO E VE NT SHALL THE X
CONSORTIUM BE LIABLE FOR ANY CLAIM, 0AMAGE5 OR UlliER LIAB ILITY, W HETHER IN AN
ACTION OF CONTRAC T. TORT OR OTHERWISE, ARISING FROM, OUT O!'OR IN CONNECTION W IT H
THE SOPTWARF. OR TilE U SE O R OTHER DEALINGS IN TifE SOFTWARE.
beep! a~ contained in this notice. thc name oft he X Consortium !.ball not be used in adveni~i ng or Olherwise to
promot~ the ..,1J,.,, ...., or urher dealing• in thi• Software w ithout prior wriltefl authorization from lhe X
Consortium
ASA Data Security, Inc. MDS Message--Digest Algorithm
CopyriGht (C) 1991·2, RSA
O~ta Security.
These n111i~"" mu't be tnained in any copie~ of any pari of Ibis documentation andfor wftware.
(13) thttpd 2.25b
Copyright ~ 2000 by- Je f Poskanzer <jef@m~il.a•·me.~"m>_ A ll ri~ts te <rerved
Redistribution and usc in ~ooocc and binary forms, with or wilbout modification, arc pcrmi~ed provided
th~t tht'
followi n~: condilioos are mcl:
Redistribl1liOfiS Of $0orce codemusr retain the abo•-ecopyri£ht n04ice, this li$tofconditions and ~le
following diM:Iainler.
2. RediMrlhurions in binary form must reproduce the above copyright n01ice, this list of co nditiom and the
following di~laimer in the documentation andlor nther matenaL' pro~ided w ith th~ distriburion
THIS SOFTWARE IS PROV IDED BY 11-IR AUTHO R AND CONTRIBUTORS "AS IS" A NO ANY EXPRESS
O R IMPll!ill WA RRANTIES;, INC LUDING, BUT N( Yf LIMITED TO . T!lE IMPLIED WARRANT IES OF
MERCHANTABILIT Y ANI.l FJT:-IESS FOR A PARTICULAR PURPOSE ARE DISCL AIMED. IN NO
E VENT SIIALL TilE AUTHOR OR CONTR!RIIffiRS BF. LIABLF. FO R ANY DIRECT, INDIRECT,
INCIDE:-.'TA L. SPECIAL, E XEMPLARY, OR CONSEQLENTIAL DAM AG ES (I....CLUDING , BUT ~OT
LIMITED TO, PROCUREMENT O F SUBSTinJTE GOODS OR SERVICES; LOSS OF t:SE, DATA, OR
PRO PITS; OR RUSINIISS INTERRUPTION) HOWF.VF.R CAUSED A.'\40 O N ANY TIIEORY 01' LIABILITY,
'WHETHER IN OONT R ACT, STRICT LI ABILITY. OR TORT (INC LUDING NEGLIGENCE OR
OTHERWISE) A RISI...,G II\ .-\NY WAY OUT OF THE USE OI' TIUS SOFJWARE, E VEN If AD\-l SEO OF
T HE POSSIBILIT Y OF SUCH DAMAGE.
Li~-cmcd undathe Ap~cheLi(ense,
Vefl'ion 2 .0fthe "Licen:;e");
hrtp:l/www.apach~.orgllicensc JILlCENSE-2.0
3.
Boost
Boo§t Soflwure License
V~rsion
1.0 - Augustl7th, 2U03
Permi"ion is hereby gnmed , free of c harge . 10 I n)' penon or Qfganiuu ion obtaining a cop)' or the .<Oftwarc and
this licen~ (lhe ·•s ol'lwaro") 10 u'IC, reproduce, disploy, d iSlrlho.!le,
uoc~tr, ond tmn>mit the Suft" ·are, and to prepare deri•·•tive ,.·urks of the Software, ~nd to p::rmil third-parties to
'"homiheSoftwan: isfumishetl lOdo so. alliubject to thefollowing·
H te copyright nolic~~ in tho:: Software a nd this e ntire ,;t:atement. includins the ahoYe lkense grant, this n:striction
ami the following d i,;cluimcr. must be: inclutkd in all cupic> o f the Software, in whole or in pan, and all dcri•ati,·~
'"-orl.s of the Soft war.:, unless such copi~ or dcrh'Btive worirs arc solely in the form of machinc-e><ccutilblc object
code geoeratedhy a <nurce languageprocessor_
TI-lE SOFTWARE IS PROVIDF.D "AS IS~, W ITHO UT WARRA/\T Y OF ANY KlNU. I;:X PRESS O R
JMPU EU. INC LUDING BL'T NOT LIM IT F.DTO llH\WARRANTIES OF MERCH ANTABILITY. FITNESS
FOR A PARTICUL AR P URPOSF" TITI.E AKD 1\0N-IN FRINGF.MF.NT. IN NO E VE:'>I S IIALL T HE
OOP YR IGHT HOLDERS OR A NYO NE DISTRIBUTING THE SOFTWARE BE L IABLE FOR AN Y
OAMAGt:S O R OTHER U A!! IU TY, WHETHER IN CONT RACT. TORT OR OTI IERW JSI!. ARISING
FROM, OUT OF O R IN CONt\ECTI0:-.1 W ITH TilE SOFTWARI', O R THE USE OR OTiiER DilALINCS IN
11-lE SOPTWARE
aecompanyin~ document~tion ,o,·c rcd by
(17)
Expat
hup:ffw"·w.j:l~rk.conVxmllcxpat.html
E.. pal Liceru;e. Copyri~ht (c) 1998. 1999, 2000 Thai Open Source Software Center Ltd
Permis>ionis h<:rcbygranted, frce ofcharge, toanyperson obtaininga •opyofthis soft" ·areanda"'iOCiated
documentation Illes (the " Software"), ro dcal in the Soft"ar~ without n:>triction, includill); without limitation the
right> to use. cor~·. mrxlit)·. merge. pllblillh. d illtribute , sub lic..nse, amVor ..,]] wpies uf lhe Softw~. and 10 permit
pcn;um to whum lhe Software is fum ished to dow. >ubject to the following condition~
Thc aOOvccop)Tight noticeand thisperm i:l.!.ion ootice shallbc: includcd in all copies o r substantial portiom of the
Suftware
hnp:llwww.codepm;ect.com/l(BicppiFast!Xlcgatc.a§pA
2.
A ltered wurce ~u&ion; mu~ be plain!}· marked a' " ""h. and must nnt be mi11'Cpre..,nle<l us being the nrisinal
3.
Thi~ notke may not [,., remcwed or lllt~red from any source di<llihution
~oft""""
41, {45]Nici: Sayer <mrapple@qu.ock.kfu.wm> SunOS streams modules
BY E XERCISING A -,;Y R IG HTS TOU IE WO R K PROVIDED HER EIN. YOt: ACCFPT AN[} AGREE TO BE
SOUND B Y THE TERMS OF T HIS LIC ENSE. THE AUTHOR G RANTS YO U THE R IG HTS C:ONTAINf.f)
HEREIN IN CONSIDERATIO!\ OF YO UR ACCEPTANCE OF SUCH TERMS AI'<'D CONDITIONS . IF YOU
00 NOT AGR£E TO AC CE?T AND BE BOL:f\'D B Y THE TERMS OF THIS LICENSE. YO U CANN OT
M AKF. ANY U SE OF T HE WORK.
J ean-loupGailly
45. [49]Jcff Steinman <jss®pcbbles.jpl.nasa.go~> Datum P'TS clock driver
ftp:ffds.internic.netlrfdrfc 1 9SO.txt (7.1ibformat), rl'c i9S I .m(dc0atc format)and rfc l 952.t~t (gtipformal)
b.
(15) Apple Lossle$S
··Author" means the indi.,.idual or e ntity that offe~ the Wurk under the teTTTI:I o f this Llte~se.
" Derivative Work" n'>eallll ~ work lxlitd upon th<" Work or upon the Wort. ~nd other pre<xiMing
d.
"E\ f)CUtahle l'ile s" refe r 10 the c~ecutablcs. hin :IJ)' fi!es,conflguration and nny requ ired dil4a files
iocludedin the Work
"Puhl i!h~r"m~:\n> the prtm dct o f the wdl..itc, mo.gazin~. CD-ROM, D\'D or urher medium from or by
whichlheWork is obu incU by Yo u
g.
"Standard Version" refcn to s uch a Worl< if it hHs nlll been moditi~d. or has been mndilie d in
h
"WorkMrefers to the ~'OIIection of lib Ui,tribut~d by Ihe l'u.blisht r. including the Source Code,
l:'.xerutahle Filcs, b inarie s,d:lta liles, docum<'!ntation, ,.hilepapen. andthe Articles.
46. [50]HarJa n Stenn <hatlan@pfcuom> GNU IUtomal<elautnconligure mal«'o vcr, various ocher bits (~e
theChangeLog)
4 7 . (51]Kcnneth Stone <ken @l<ld.hp.c<>m> HP· LIX port
48. [32]Ajil Thyagar~jan o jit@ee.udcl.edu>IP multicut/anycast support
49. [D ]ThmOllki TSURUOKA <1$uruola fi!lnc.fukuoka·u.oc.jp>'ffiAK clock dri\-cr
50. [54]Pau1 A Vlxic <viJ<ie@vi~.com> T rue Tome G PS dri~er, generic TrueTime d ock driver
5 1, [55]Ulrich Wind! <Uirich.W indl@rtwni-n:gensburg.de> corrected and validated liTML document.•
according to the UTML DTD
m• ilto :mark_andre.,.s@isc.org
mailtn: ~ltmeier@atlsoft.de
3.
mailtu : vhai•@ mailm1111l .intel.co
4.
5.
maillo: lcirkwood (ihtriderfm.intel.rom
mailtn: michael.barone@lmco.com
6.
7.
mailto: J e.an-Francois.Boudreaull!ihiage nie .l}l: .ca
mailto: karl @lowl.HQ .ilear.com
mai iTO: gn:g.bra..:ldey @bigfoot.com
"Artid~•" m~nn<.
hnp:l/www.~pachc.org/lken$e$/
accordancewlth thc consc:nt oftheAuthor. suo.:hconscnl bein~; intho::full discn:tion ofthcA uthor.
Dcfinitiom.
••Lic..n.e" shall meanthetermsand conditill!ls forll<e, reproduction, • nddistrihutiona<defincdhy Scction'
I through 9ol thisdot:umenl.
~all mea n
the copyright own~r or entity authori(ed by the cOpyrighl owner tha t is granlint: the
1 1 . mailto: re&@dwf.c om
12. mailto: clift@ml.csiro.au
13. mailto: cascy@cS<.:.cu .za
"You-(or " Yoor" ) shall mean an individual or lcgal E ntityexercisingperrnissionsgranted by thi• Licen"'.
mailto: Man:.Bren@westgeo .rom
10. mailto: Piell:.Brooks@cl.c am_ac_uk
··You" i~ you, an individual or entity wi.tling to use the Work and CJterci ~ yoor right.• un<W thi;
U ccnsc
2.
Fair UseJFair Ui><' Right~. Nurhiug in tlri~ l.iccn~ is intended to reduce, limit, Of re~tri't any rights ari•ing
fromfairuse, fairdealing, lirstsale or odlerllmirationsonlho: nclusi"eriahts of tlle copyri~:htow""' un(!er
oop)·right law or other
"Legal Etttily" sh~ll mean Ihe union of t he t>Cting emity and 1111 mhercnlitiu thatcootrol. are coouolled ~·. or
arc u(l.(ler COIIIniOil control with tha t emit}. For the Pli'l"-'••:" of t hi' definitioo. "control" mean> ti) lite power.
d irrct or indirect, to cause tht diroction or manag~mcnt nf such e ntity, wh~!her hy contract o r OthcrWiiC, or
(ii) owncnhip of lifty ~r~-cnt (50%) or more of the oot>.tanding sha res, or (iii) henelicial owne rship of su' h
e ntity.
8.
9.
3.
e~ercisc th~rightsin the WOfk a•stated be!ow
h.
14. mailto : Sven_Dietrich @trimble.COM
17. mailto: denni~@mrbill.canet.ca
18. mailto:jhay @iconltek.csir.co.~a
1 9. maiho : slenn@herald.u~ask.ca
20 . mailto: igl~•i;u;@uci.edu
l'krivativc Work . providf d that Yo u in>('n a prom inent nmicc in each changed file stating how, when and
whereYo u ch•nged thatf1lc
d
"Object" f0rtt1 ~all mean ~ny form res.ulti~g from mechMiu.l trand orm:.tion llf tn\llslation of a Source
form. includtng but not limited to compiled ohject corte . gener:ncd documentation. and corwersion~ to other
TheArtideodir.cussinGthc Work puhlished inanyfnrmhythcauthor m.:ly not bedi5trihutcdor
rCP\Iblish~'([ wilhtlut the Author's <vn.o;cont. l'he author retain~ cnp)·right to any s uch Article~. You 111ay
use the Executable Files •llli Soul'(t Code punuanlto th 1~ License but you may oot rcpo>l or republi ~h
orothcN'i"'distrihute ormn~o: availahlethe Anicles,withnutthc prior " ·rinen coo!.tnt of the Author
Any subroutine$ or modulll$ s upphcd by Yu u and Jinhd into lhe Source Code !If E~e<·utable Fiks this Work
medi~lt~"-
"Work"
•h~ll
mean the work of authorship, whether in Source or
Object form. malk: a>ailable
und~r the
23. mailto: Han~.Lamhermont@nl.origin-it.com
Lictnse. as indi•att:dby acopyrightnoticethati~ includcd in nr attachc:diOthew<'>fk(an C\ampleis pr"'·idtd
2 4. mailto: H.Lambermoot~chello.nl
in
25. mailto: phk@Freo:BSD.ORG
26. hl!JI:Ifwww4 .informatik.uni-erlangen.del'it7d<ank1
27. mailto: kardel(at)ntp(dot}org
You ma)' usc the stand:lrd vers1001 of the Soon'~ C~ or £ J<e.:utuble Files in Yuur u wn applicatio ns
You ma)· a pply bug li~cs, ponabihty li>.e> and othc:r motlilications obtained from the Puhlic Domain nr
from the Author. A Work modiflt<l in such a way s hall still be: con~idered th~ ot•ndard wrsio n and will
bc: subj ccttClthisLiceose
You may o thc,....ise modify Your copy u fthis Wurk (eAcluding the Atticles) in any way to create a
"Soorce" fnn n •hall mean the preferred form for making mudifl<'ations , includin~ htlt IX){ limil~d 10 soft wan:
~ource tode,documentatiOII ""'.-.::e. and configuratil.lll file•
2 1 . m:Uito: jagubt.>x.gsknnsa .gov
22. mailto: jhj@cha tham.usdesign.com
~pplic~hlc 1~"''$
License Gr~t. Subjo:~llo the tcnn< a nd C'Oftditions of this License, the A ut hot' hereby gr.1m~ You a
"·orldwide, ruyalty·t're~. non-eJclusi~e. rerpetuAI !for Ill<.: dt1ration o f 1hc applic~ble ropyri~ht) lio,;,:n"' to
15.mailto:dundas@salt.jpl.nasa.gov
1 6 . m.tilto: duwe@'immd4.informatik.uni-crlangen.M
work~.
"Source Ctide" re fe .:. to the culle~'lion nfM>Urcc code and conftguration f1les u!.Cd to c reate the
E \ ecutable Fil~s.
TERMS AND CONDITJONS FOR USE. REPRO DUCTION, i\ ND DISTRIBUTION
" Licensor"
License.
collr:cti\-cly, a ll ankle< wriru:n hy Author which describes how the Source Code and
E~ecutable Filesfor theWorir maybc uscd h)· a user.
Arachel.iceniC
Yersion 2.0, January2004
1.
1.
2.
1. Dcfinitions.
The data fo rmat us.:<! by the .Vib library i~ described by RFCs (Rtquest for Comm~nt1) 1950 1<1 1952 in the !lies
th~ Appetidi~
helow)
"O.,ri~"tivc Works" s hall mean • ny work. whether in Sourc e"' O bjoct form. Ihal i• based on lo.- dcri,·ed
from) tm Work and for "'·hich the editorial re,·ision! . anllOilltions,elab<:lrationo. or other mO<Iir~emions
You may distribute the standard version uf the becutohle Files and Snurce Cndl: ru l)eri~ali<·c Work in
ll!\llregRtc with o tlwr (possibly commcrcil l) prosr~ms as part ol a larger (poss ihlywm mcrc ial) •oftware
distrihuti" n
'hall not ~ con1ideredpanof thu Wur1< and "·ill nrK heli.ubjccttothe tcrms ofthisLiccnsc
4.
5.
with or without modification. are pcnnittcd pro,·Kicd thai the
The names of i1~ cOOO'ibutors may not be used to entlo.-..,ur promote product! derived from tbi$
<nllwJli'C "'' id:10ut specific prior written ~rmission.
THIS SOFTWARE IS PROVIDED BY T HI\ COPYR IGHT HOI.DF.RS A J\"DCO:-ri'RIBUTORS "AS IS" ANU
ANY EXPRESS 0)( JMPLlED WA RRANTIES, l NC l UDlt\0 . BUT NOT LIMITED TO, THE IMPLIED
WARRA,'filE.'iOI' ~ERCHA:>OTABILITY A ND I'IT.-..:ESS f-OR A !'A RTIC UL A R PURPOSE ARE
DISCLAIMED. IN NO EVE~ SIIALL THE COPYRIGHT OWt\ER OR co-,;TRIBUTORS B E LIABLE I'OR
ANY DIRECf. ISDIRECI. INC IDENTAL. SPECIAL, !!XEM J>t..ARY. O R CONSEQUE NTIAL DAMAGES
(INCl.UO!NO. BUT NOT LIMITED TO, PR0CUR£MEJ\' T OF SUBSTITUTE GOODS OR SERVICES: LOSS
OF USE, DATA . O R PRO A TS; OR BUSINESS 11\'TF.RRUPTION) HOWEVER C AUSED AND ON ANY
T HEORY OF LIA BILITY, W HETHER IN CONTRACT, STR ICT LIA Bll.ln'. O R TORT (INCLUD ING
NEGLIGF.NCF. O R OTI1ERWISE) ARISING IN ANY WAY OUT OF T HE USE OF TillS SOFfWARE, EVE:'~!
IF A DVISE.DOF lliE POSSIBILIT Y Of SL'CH DAM AG E.
(22) cURL
http:/kurl.h1lJix.sc
COPYRIGHT
.~NIJ
I'EKMJSSJON NOTICE
Copyri)lht (c) 1996 · 2011. Danie l Stenberg. <danicl@hau.~>l'ermi<.~ion tn u!<e. copy, modify, and di~tribute this ooftware fOf any purpose with or '"ithout feci~ hcrct>y granled.
provided that the a hove copyright MQ1ice and this pcrmi>~ion notiul ~ppeu in all ~'t.lpic~
T HE SOf-TWARE IS PROVIDF.D "AS IS", WITHOUT WARRA:il'Y OF ANY KIND, EXPRESS O R
IMPUEO. INCLUDING B UT NOT LIMITED TO THE WARRANTIES Df MERCHAN'IJ>.HJLIT Y, FITN ESS
FOR A PARnClii..AR PURPOSE AND N0 t>.1NAUI's' GEMENTOFTHJRD PARTY RIGH TS. IN NOEVE:\T
SHALL T HF. A\Jll !O RS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, OAM AGF.S OR
OTHER LIABILITY, W HETHER IN AN ACTION O F CONT RACT. TORT 0)( OTHERWISE, A RISING
FROM, OUT O F O R IN CONNECTION W!TII T HE SOf<,WARE O R lll E USE OR OTHER DEALINGS IN
Eu ep! as contained in this notice, the name of a co pyright hnllkr shall not be used in ad~ertisins or ot~t'l'wi~-e 11:1
promOie th~ r.alc. us.: or other dealings in this Software w ithool prior "·ritten authorization of the copyrit!ht bokkr.
(23) c -are s
hnp://c-~ru.lut.u.IIC
Copyright 1998 hy TheMa~sachur.em lmtilute ofTechnology.
Permi.<.•ioo tn u<e, copy, modify, and distribute this software and its documentation for any puri)O(<e and withnot
fee is hereby gran1ed. provided thai the above copyright notice appear in all copie£ and th~t buth that copyrighl
notice a nd This permiss ion nQtice appear in supponin~ docuntCllt~tiun. 11nd th• llhc name of M.I .T. nnt be used in
ad,·erti~ing or ruhlicity ren aining tudistribuTion of the softwm without specific. written prior ~rmi,~ion. M.l.T.
makcsno representations aboutthesuitabi~tyof thi>wflware ruran)'purp<ne. ltis pro>itlcd "as is" withoot
4 2 . [46l-Jack Sa.portas <jack@inoo~ativeinterul.com> Saved a Lot of s.,acr on the ~ruff in the htmVpic/
subdirectory
43. [47]Ray Schnittler<schnitz@unipress.com> Uni.lware l pon
44. [48]Miclw:l Shieldll <Mields @tcmbcl.org> USNO c lock driver
jloup@gzip.org
fom1~.
Redimihminns ofoourcecodemust ret!inthe aOOve c opyright»>Oice,this listof condilion•and thc
following d isclaimer.
Redi~tributions in binary form must reproduce the abo•-c copyright nurice, this li~t Dfc ooditioo• aod the
followingdisclaimerinthedocumentationandfor01hernonteriali; pro"ided witl1t~c distribu1ion.
the L.i~'Cnsc
n-IE WO RK (AS l.lEFINED RF:J.O W) IS PROVlDF.O UNDER TilE TERMS O J' TH IS OOOF. PROJ F.CT
O PEN LIC ENSE ("LJCJ::NSE"). T HE WOR K IS PROTECTED BY COPYR!OH'I AND/O R 0 11-lER
APPU C.ol,llLF: LA\\'. ANY US F. OF THE WO RK OTHER T HAN A S AUTHORIZE(} UNUER T H IS LIC ENSE
O R COI"YRIGHT LAW IS PROHIR ITfD
40. {44]Wilfredo Sanchez <w~anehez@applc.com> added support for Netlnfo
1.
2.
See the Licen.<e forth~ ~pccific language gnve10ing pcrmi.-inn< and limitalions under
(18) FastOelegate
38. {42]Rainer Pruy <Rainer.Pruy @informatik.uni--erlangen.de> monit()ringltrap scripts, statistics file
handling
39. {4J ]Oirce Richards <diRe@zkJ.dec.t:OOL> Digital UNIX V4 .0 port
Twister
Rcdiseribution and use in liOUT\:e and binary
followingcunditiu flliaremet
Unlcssrequi"-'<ib)'applicabletaw or&greed toinwriting , roftware di•tributedunderthe l.icrnscisdistributed on
an "AS IS" BASIS, WITHOUT WARR ANTJE<; O R CO NDITIONS O F ANY Kl~D. either e<press or implied.
alter it and redillri~e itfreely, subjoct to thcfollowing i'Cstrictiom·
MSFclockdri~er
uf co!ldlliuM and the
TillS SOVIWARE IS PRO VIDED 8 Y THF. COPYRJG l iT IIO LDERS AND COI\-'TRLBUTORS "AS IS" ANU
ANY EXPRESS O R IMPU ED WARRA NTIES , IJ\CL UDJNG . BUT Nm LIMITED 10 , T HE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FO R A PARTICULAR PURPOSE AR E
OISCL Al\lEO. IN NO EVENT SHALL THE FOUNDAT IO N OR CONTRIBUTORS RF. LIA BLE FOR ANY
D!RELI, IND IRECT. INC IDENTAL, SPEC IAL, F.XE.\iPLARY. O R CO NSF.QUENTIAL !)AM AGES
(!NCLl!DlNG. IWT NOT LI MITED TO , PROCUREMENT OF SUBSTITUTB GOODS OR SERV ICES; l OSS
OF USE, DATA . OR PRO FITS: OR BUSINF.SS INTERRUI'TIO~) HOWE VER CAl: SED AC'<D ON ANY
T HEORY Of LI ABil .ITY, WHETHER IN CONTRACT, 5TRIC J'LIAB ILin', OR TORT (INCL UDI:'-/G
NEGLIGENCIO OR OTHERWlSE) ARISING 1:-1 A~Y WAYOUTOFTHE C SF. OF 'll-OS SO FI"WARE, E VEN
If ADVISED Of 'JliE POSSIBILITY Of SUC H DAM AGl.
~ttp://www.mtuh.sc:i.hiro1hima-u.ac.jpl-m-mat/MTfMTW02/CODES!mt1 '1937"'.c
Permission is gr(l(lted tu ~nyooe co u1e thi1 software for any pur~. including commercial applic ations. arK! to
The origin of this software must not be mi;repre,.,nt~d; you must not claim thlli. you wrote the original
•oftw.ue_ lr you w.c lhis w ftwarc in a pre>ducr, ~n ackno wledgment in the prod oct d()Cumcntation would he
appr~ciatcd but is not required.
li~t
Rcdistribulio nsin bill(lf)' formmu>l reprtidoce theabo.w e cop)'rightnotice, thi.llist of conditionsaodthe
rollowing d isclaimer in the documentation and/or other materials provided w ith lhc distribution
(2 1 ) Mersenne
This software is provided 'as-is ' , without any eJ<pn:S~ or implied w!lfrant)'. In no even\ will the author5 be held
li8ble for any danlllae s arising from the u~;eof thi~ ~ol'tware
1.
RWi•llibutionsof source code must retain Ihe ft00>c cup}Tightnuricr, Ihis
fnllowingdiscla imcr.
Copyright (C) 1'197 • 2002, Makoto Matsumo\0 and Ta kuji N isltimurl,
All rightsTCKn-cd
Cop)'Tight (C ) 1995-2002 Jean-loup G~illy and Mark Adler
zlib.h -- lnt~:rfacenf lhe 'ilih'generalpurposecompres•ionlibrary'-crsion l .l .4, Marchllth, 2W2
·
y<J<~m•ynntuse this tilcexcept incomplian..
-.: with thc Lic.:n!le
T HE SOFTWAR E IS l'RO Vm ED "AS IS.., W ITHOL T WARR ANTY OF ANY KINO, EXPRF'!SS OR
IM PLIED, INCLL' DING BUT NOT LIM1TF.D TO TilE WARRANTIES OF MERCH At>.'TABIU TY, H T NESS
FOR A PARTICULA R PURPOSE A ND NONINFRINGEMENT. IN NO E VENT SHALL THE AUTHORS OR
COP YRIGHT HOWERS BE U ABL" I'O R ANY CLAIM, DAMAG['S OROTilER LIA BILITI', WHETHER
IN AN ACTION OF CONTRACT. TORT OR OTHERWISE, ARISING FROM, OUT OF O R IN CONNtC fJON
WITI-l TilE SOfTWARE OR THE USE O R OT HF.R DEALINGS IN TIIESOI'TWA RE.
(14)zllb
R~di>tribution ond use in w...rcc and biM ry furms, wn~ Of w ithout ntodificalion, an: ~nnit~d provided that the
follow inaconditions are met :
Y<J1l mayobt•in acnp~· ofthc l.i.ccnse at
hnp'i/www.hoo~t.nrgl
l.icen~e to copy a nrl usc thi~ software is I! ranted rrovided that11 i~ ulcnlilied a > the " RSA Data Securit)'· Isle. MD5
Mer.!! age-Dig= Algorithm~ in all matt:ria l mentioning or referenc1ng thi.~ software or lhis fun~tion.
License is auo granted tO ma~e a nd usc deriv~tivc w~k> provided th~t such wO<J:s are identified as "lk:n ved from
the RSA DBta !keurily, Inc . MOS Me~~as~·Dige~t Algorithm'' in aU material m<'!ntioning ~ refe re111.:ing th~
derived wo rk.
RSA Data S..curily, Inc. make$ no rcpresentatiuns con""ming ~ither the mert:h~ntabilit y o f !hi> •oft wa re or the
suitabiUty ofthi~ s.oftw;on: for any particular purpose. II is pru>idctl "~ sis~ without express or implied w arranty of
any kind
1.
casicr idcnlification withinthird·panyan:hive9.
Coj)yright C 20Jl Applelllc. AII rightsn:~oerwd.
(16)
Inc:. C:reitcd 1991. All righlf re!<er~ed
Cupyright (c) 20U2,Xiph.orgFoundatioo
Ne ither the name of the X iph.org Foundation nllf the names of illi cuntrib!ltoh may be used to endorse: ur
promote products deri~ed from this ~flware without ~ilic prior wlin en permi"ion.
APPENDIX: ! low to appl) the Apache Lk eno;e tn your work
C opyria ht (c) J99g RtdHa1 Sufiware
(12)
"'"Ychoo:;e to ()ITe r. aod cllarge a fee fllf.
a<.-ccptance nt' ~uppnrl, "''manty, indemnity, or urhcr liahility obligations andiDf rights consi" emwith this
Patell! l .icc nsc. Subjcct tu the !erms and conditions o f thi' l.iccmc. each Author her~by grams to You a
pc~petual, worldl'•irk.ti On·e~closi~e. nO<hargc,royalt;··frtt, irre• ncahle(e>ccptas •tatcd inthis >ectiun)
pa~ntl iccn sc to make , h:we made. u..,, import. 1111d othe rwise tran<fcr the Work
Rcstri~1ions. The lice rlse gran led in Section 3 atxwe is expre«ly mi!de suhjt.,ttu and limited hy dl~ following
nprcssor in~plied warranty
1.
1.
3.
4.
5.
6.
7.
8.
l}dinition<.
h
maillo:mark_andrew•@isc.orr
"l.iccnse"shallmeanthetenns and condilion~ forvst:, reproduction, anddi stributiun asddi...,dby
2. mailto: altmeier@~d..,fl.de
Section<
"Licen<Or~ ~hall
mean the CQpyri; ht o"ner or entity auti>Qri7.ed by d~ CQP)'ri ~ht owner that i> 1:1anting the
Lkcn<e
Fw Llsell'air
2.
"Lt:gaiE.ntity"sha11 mnn t he uniun o!'theactingemityandall<>ther enti1ie~ t h.r controJ. ar~control ledby, Of
mailro: sreg.brockley@bigfout.rom
mailto : Man:.Brcn @westgeo.com
10. mailt<l: Piete.Broob@ cl.c~m.ac.uk
11. mailtu: reg@Jwf.com
12.mailtc:dift@ml.csiro.au
13. mailto:casey@csc.co.za
'You" (or ~Ywr") shall mean an iodi•·idual or Lcgall::rllity tAen.·i•ing perrni» iorui granted by this Licen.._.
Li~e11se Gr~n1. Sub.J<:cl to the tenns and rond oi!Ons of this Li<.-en~e. 1he Aurhnr hereby &runts You ~
3.
worklwi~. myalty-free, nnn-nclusive, perpetu~l (for tho:: duration u( the applicable ropyrighti lice nse tO
as ~Uled below·
•~creisc the rig ht' in the Work
b.
14. mailto: Sven_Dietrich ®trimblr:.COM
15. mailto: dundas@so.Jt.jpl.n3$a.goY
1 8. mailto:jhay@icomtek.~ir.ro.za
m~ilm:jbj @ chatham.usdesign.rnm
" Work" shall mean the ,.-ork of n lhorship. whether in Source or
Object form. made a,·.,ilable under tloe
UcenS<', as indicatnl hy a copyright nOtice that i~ in.;;ludtd in or attached to the work (a n example i~ P""'idcd
intheAppendix bclow).
23. maiho: Hans.Lambcrmont@lll.origin-it.rom
24. mailto: H.tambermont@cbcllo.nl
25. mailto: phk@FruBSD.ORG
"O.:rivmi"" Work.•"' •hall me~n any work. whether in Source or Ollject furm, that i' ba'ed on (or derived
from) tl>cWotkandfnr whic h the cditurial revisions. annotatioos, elaboratio ns. <>r<>lller mndi fications
n:pn:scm. u a v.llole. an original work of authorship. For the puqmsc~ ofthis License, ~i,·ati•e Wrnh
shall n.ot ind ude wlllhlllat n:main separable frum, ormrrely link (01 hind b y name) tu lhe i nterbc~< of, the
Work aOO Du!Yativ~ Worh thereof.
26. http://www4.informatik.uni-erlangcn.de/'.L7ekard<:l
27. mailto:lardd(at)nlp(dol)org
28. mailto: jones@herme•.chpc.uteu s .edu
29. mail!o: dkatz@ci<eo.com
30. moilto:lereseiec.lbl.gov
mailto: thtlrinn@diku.dk
mailtu: mill•@udel~du
36. mai!to: moeller@gwdgv l .dm:t.&'"'dS.dc
37. mailto: mogul@pa.dec.c()ITI
38. mai!to: tmoore@fi~~el.daytuooh.ncr.rom
39. mailto: hmal@whence.com
40. mailto: clerek@toybo~.demon.co.uk
2.
3.
mailto : vi~ie @,·i~.com
LICENSE ISSUES
Workshall tcnninatc asofthc datesuchlitigationi~filed
4.
Copyright (c)l998-2007 Th<:~nSSL Projecl. All tigbt~rcscrvcd.
R<Xlistributioo and use in source ~nd binuy forms. witb or without mudif~~:ation. arc pmnilled pr(noiJoed th~t the
following oondilions=met
1. Redistributions of source code mustrclain thcalxwc copyright notic~. thislist ofcooditions andthe
folluwingdi~oelaimer.
3.
All ad•ertiMn~ material> mentioning features or use of this "'ftwat'<' must display the fullowiOJ!
adnow!Mgment·
' 'This prodoctincludcssnftwaredeveloped by thc Opc.nSSLPrujectforuscintbcOpenSSL Toolkit.(http :/1
WWW.O('IICI1SSJ.org/)"
4.
The name~ ''Opc:nSSL Twlkit" and '"OpenSSl. Proje~-t"' mu« not be us.:d to e nd<>r'IC or prOffi(l(e pn:>ducts
derived frllft'l this software without p<iot written pc<mi~!-ion. For written permission. please coma<:1 open;,j.
cor= " open:;sl.org.
Products derived from thi~ software may 001 be called "OpenSSL" nor may '"OpenSSL" appear in their
5.
1.
You m~ gi,·e a ny Other recipient~ nf the Wnrk Of Derivati' '<' Wort.$ B copy of thi~ License: and
2.
Yoo most caosc any modified file~ 1ocarry prominent nQtict$ ~tating that You changed the file s: and
3.
You mu~ relain. in tho< Source fonn of any Derj,.·ali~e Woti<s that You di•trihute, all copyright, palenl,
trademark, lnd aurihution notices from the Source form ufthe Wort., excluding thnsc nolk~ that do not
perutin to anypartofthe DerivativeWorks;and
If the Work include\ a '"NOTICE"tc~t file a~ part of it~ di'-lrihulion. then a ny Derivativ~ Works that You
di,trihut~ must include a readable copy of the allribution JKJiico:ocontained within such NOTICE file.
u d uding those notices that do not perutin tn any part of the Derivati,·e Work>, in at leas t one of the
following place~: within ~ NOn cE text file distributed u part of the Deri~ati•·e Wnrh ; "'it~ in the
4.
Source fonn or dncumentalinn,if providedalonswithlheDr:ri~ati,., Wu•k-:ur. within a display
~eneraled
by the l)eri,.,_!ivc Work!. if and "'here>er such third· pao1 Y nntie<:$ normally appear. The
content$ of the NOTICE file are for infurm~tional purposes only and do not modify the License. Yo u
may add Your own aaribution notict-s within Ocriv&tivc Works that You IIi>tribute, alo ngside or as an
ao:ldendum to die NOTICE text from 1he Work. provided that such :Midi1ional attribution notices can nul
be~'Oflstrued R$ modifying thcl.i,-ensc
r~~mes witho~tprior written permissioo of theOpcnSSL Project
Redim ibutioos of any fonn whatsoe1-er mu$t n:l.tin the following ackoowledgment
1'hi! prod~~Ct inc ludes !lOft ware developed by the OpenSSL Project fur usc in the OpenSSL Toolkit
(http://wwW.o:>JKnSS].orgf)"
TI-llS SOFJWARE IS PROVIDED BY THE ~nSSL PROJECT "AS IS" AND ANY EXPRI'..SSED OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TD. THE IMPLIED WARR ..o\NTIES O F
MERCHANTABILITY AND FITNESS FOK A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL TiiE OpenSSL PROJECTOR ITS OONTRIBl.!TORS HE LIABLE FOR AN Y DIRECT.
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAG"-S (INO.UDING ,
BUT NOT l-IMITED ro. PROCUREMENT OF SUBSTIT UTE GOODS OR SERVICES: I.OSS OF USE.
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAL'S Ell AND ON ANY Tl!EORY OF
LIA BILIIT. WHETI-IER IN CONTII:ACT. Slli:ICT U ABIT.JTY, OR TORT (INCLUDING NF.GLJGE:-.'C F. O R
OTHERWISE) ARISING IN ANY WAY OUT OF TilE USE OF THIS SOFTWARE. E VEN IF ADVISED O F
m E POSSIBII.TTY OF SUCI! DAMAGE.
You may aokl Your own copyri~ht ~ta1emcn1 to Your modi fiCation~ and may pro,·ide ~dditional nr diffct'<'nt liccn•e
term~ and conditions fnr use. reproduc tion. or distribution of Your modifiCa tions. or for an)· such Deri~ati,·c
Wotb as a " -hole, provided Your u>e. reproduction. ~n d distribution ur the Work «herwi>e comp lic~ with the
conditions Mate.d in this License
5.
Thiti product includes cryptographic ~oflwlln: written by Eric Youns. (ea~ @cryptsnft.com). Tltis Pfoduct incl~lk>
~oftware written by lim Hudson ( tjh @crypl'snft.com).
Copyright (C)
Notv.·ithstanding lhe abv-.-e, nQthing hereinshall su~r>tdeor mudifythetetmsuf any >eparJtc licen>e
6.
7
Redi..mbution$ in binaryfonn mustreprod11CCthe <lbove oopyrigltt notice, lhi• li~of coJ>ditionsa~~dthe
follow in&; disdairmr in the d..-.;urnenuuioo and/or other rrnumal~ pro-.·idcd with the di>tributiUfl.
tu use the tr;,lle n1me..<, lf'J dem:trks . .,~ ,;~e marks. ~r product Mom!
Disclaimerof Warramy
Unless required by • wlk able law or agreed to in writing. Lk cn<Or provi!k<; the Work (a old each Cootrihutnr
provide< it• Contrihutions) nn an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND. c itherupress or implied. including, without limitation, any wtwrantie < nr condi(inn< of TITI. E,
NON-INFRINGE~CNT, MERC HANTAIIILITY, or FITNESS 1'01-t A I'AK'llCULAR PURPOSE. You a•~
w lelyrcspoosiblefnrdctcrmining rhc apprupriateness ofusing or tedi<trihuting the Workand aS!iumc:any
risk~ U !<ociMCd with Yoorue"ise of permi>Sions under thi' Lken$C.
lf thilpackag•i•uscdinaproduct,EricYoong shnu!dbcgioenattriOOtion•s the <W.llh.or ofthepart.<of ~ lihmry
Redistributir•ns o f•ource coer must rc~:~in the cop) right noti~e. thi~ list o f cooditiOA!i and the following
disclaimer
usc of th~ Work in a m~•mct incnnsir.tem wilh the temt> o f thi' License
You agree not to use the Work for illegal. immoml or improper P"fJl'O""' , Ot on pllges cnnt.aining illega l,
immorul or imprupe r material. The Work is >ubject to npplicable expon law~- You agree m comply with
all ouch l~ws and regulations 1hat may a pply to the Work after Your rec..ip1 of t he WQI'\:.
Rcptcsemation<, Wammtie~ a nd Di.<chimer T HIS WO RK IS PROVIDED "'AS 1$". "WHERI! IS" AN D "AS
AVAILABLE". W IT HOUT ANY F.XPRESS OR IM PU IOI) WARRA." TIES OR CONDITIONS OR
GUAiotANTI!I!S. YOU, THF. USF..R. ASSUM£ A LL RlS K 1:-.' ITS USE. INCLUDING COPYRIGHT
JNFRI NGJ::Mt:NT, PATE:-I JNFRINGt:.M ENT, SUITAB ILITY, ETC. AUT HO R 6XPRESSLY
DI SCLAIMS ALL EXPRESS, IMPUF.n O R STATl.."TORY WARRANTIES OR C O!\OITJO:-.'S.
INCl.UOlr-:G WlTI-IOUT LIMITATION. WARRANTIES OR CO NDlTIONS O F MIORC HANTA BII .ITY,
~1ERCI IANTABL£ Ql!AI,ITY OR FITNESS FOR A PARTICULAR PURPOSE. OR ANY WARRANIT
O F Tln..E OR NON-I~'PIU.'<GEMENT. O R m AT THE WORK (OR ANY POKf iO:-.' THEREOF) IS
CORRECT. USEFLL. IJIJO-I'REEOR FREE OF Y IRUSCS. YOIJ MUST PASS TillS DISC LAIMER ON
WHENEVER YOU lllSTRlBUTETHE WORK 0 1-t DERIVATIVE WORKS
Inde mnity. You agree to defend. indemnify and hold lutrmlesr. thc Author and th~ Publisho.>r from a nd against
any claim•, mils, I<Y<se~, damages. liabili\ie$, COSIS, ande xpen&es (inclu di ng rem;onabk legal orattorneyr.·
8.
6.
7.
fee~) resulting from or rclating to any uscof theWork by You
8.
9.
Limitation on Liability. EXC EPT TO THE EXTENT REQUIIHm B Y APPU CAIILE l AW. IN NO EVENT
Wll.L THF. AUTHO R OR THE PUBLISHER llE I.IARLE TO YOU O N ANY LEGAL rnFORY FOR
A;.;-Y SPECIAL, INC IDENTAL. C ONSH J UENTIA L, PVNITJVb OR EXEMPLARY O,'I.MAG ES
ARISING OUT O f' THIS l.tCENS F. OR TI-fE l:SE OF T HE WOR K O R OTHERW ISE. EVE:-.' IF THE
AUTHOR 01-t T HJ:: PURUSI-IER HAS BEEN ADVISED OF T HE POSSIB ILITY O F SUC H DAMAG ES.
Tmn ination.
Thi• l .icc~se and rhc righ~ vanted hereunder will terminate automatically upon a ny breach h~ You of
any term of this Li<'•nse. Individuals t>r tntitil'! whc haY~ reuei•ed Derivativ.: Work$ from You under
tlti• Lic~!liC, howe""'· will not ~ the or license~ t.rminooted pro~ided such ondividll31~ Ot ~ntitie1
re main in full complia11ce willl thme licenses. Section~ L 2. 6, 7. 8. 9. lO and I I will survive a ny
t~rmination ofthi> Lkcnsc.
b
If You bring a c.1 pyrigh1. trademark . patent or afl)' olhcr infringeme nt claim against anycontribntor o~er
You daim u e made hy the Wu.-k. ) ' O(I( Licen>tl from such contributor to tl-. Work ends
infrin~en~nts
autoow i~aUy.
Suhject tn the abO\·e t~nns and w nditions, this License i~ perpd ual {for the duration of the applicable
CCJtlyril:hl in the Wu.-k). Notwith'il.l.nding the ab<we, the Author re,;erve~ the rig hi to release the Wcwk
umler differcnt liccnse !erms o rtu 'llnpdi&tributing trn, Work at any rimc; prOliidedhowe\-.:r thalany
such electron will no1 :ICf''e to " 'ithdn w thi;; Liccno;.e (or any other li~ense that ha.s becn,m i~ required to
t>c, ~nted un<kr thetennsufthis Licensc), andthis Lice""" wil l cnntinue in full forcc and effect unlc»
lc rminated ~~stated diO\'C.
10.
Puhli<her. The parties hereby confim >tl'ull the Pu~lishcr >hall nO(. under ~ny cir~:umstanccs, he re~pom;ible
for and ~hall not have itll)' liahility in respcet of1h« >U~j~t matter of this l,iccnse. The Publi:.l~~:r mak~• no
warr~n1y whutooeve r in conn.cctio n w ith the Work and sha ll not be liable to You or any pany o n any legal
1heory fc,- ~nyW.magcs "ha'soever. inc·Juding without limitatiun uny s eroeral,>pecial. in(idCntal or
cnnseque~ti a! dllmages arisong inconnection to thi< liccnse. ThePuhli,her reotcrves therigbt iO CCase m.lkinB
the Work avai l~ble to You ~~ ~ny time without nouc.,, ,
1 1 . Mi!ICCllaneou'
This Licenseshall he j,'O>'erned hy tllclaws nfthc locationof thehead ollice of theAuthor urif the
Authur is anindividual, thc laws nflocatioo of the principal ploceofr.sidence oft~Authnr.
b
d.
If ~ny provisiun of this Licmsc i> in•·a lid nr uncn!'orce~ble und•r applicable law. it shall not aff~ct the
validity or enforceability of th~ n:main<.kr of 11>e term~ of th is l.iccn.-.:. and without further action by the
parties to this Licen~e. such provhion ~hall he refnrmed to the minimum u tml necessary Itomake c,uch
prnvisio n ,·alid andenforceab]o,
No 1crm or pruois.ion of this Uccnse >ha!J he deem•d waived and oo br~ach consented to unless :;;uch
waiv~r orconscnt <hallhe in writingand.-;ignedhy thcpan y tol>l' ch:trged withs...:h waiverur coo>ent
This Liccnse co nstitutes the cntireag reenlcnt boft wun the p arlio with!C'!pcct to thc Woti<licenioed
herein. T here arenn under<randings, agrcement•urn:prescntationswith rcspec-tto theWoti<n.ot
>J)<'Cificd herein . TM Author r.hall not be bound by a ny additional provi!.ions that may 3ppca< in any
t:ommunication from You. This License m l )' not he modified " 'ithout the mutual written 3groemtnt of
the Autl\or and Yo u
(19)Tremolo
~rm issiun
reproducing tbe contenl o f the NO I'L<.:E ti lc
Thiscanbc intheformofatutualme~:<age at programstartupor indocumenlation (online orte•tual) pro•ided
withtbepack•gc.
Redistribution and U$C in !-(ll.ltce and binary fllfllls, with ur withO\It modific:.tion, are permitted provided that the
following cOI'Iditions arcmet
Lkense docs nO! @_rant
of the Liccnsor, except asre4uiredfor !l'asonahl~an-d customary usein<.k!ICfihingthe origin ufthe Wnrkand
""'
2.
TT~d<:marb.
Thi ~
Eric Young (eay!Jcrypu o ft.com) All rights reserved
Tlli~ package is an SSL impl~mentation written by Eric Young (eay@c-ryptsoft.com)
llle implemematiun was wriu m so as to conform with Netscapes SSL
This library is free for cnmme"ial and tlOI"KOmmercial u.•e a. 1()118 a; the following umditions are llho:ar<Xl to.
The follov.·ing conditions apply to a ll code found in this distribution, he it the RC4, RSA, lhash, DES, etc.. code :
ootjusttheSSLcode. The SSLdO<;umentatinn includedwilhthis distributionisco•·eredby lhc same oopyright
terms u cept that the hold~r is Tim HIKison (tjh@crypt>;uft.~om)
Copyright remain~ Eric Young's. and a< ~uch any C opyright notices in the code arc not to bl' remm"Cti
1.
res~rding ~och Cootributio n1
l...icen~e
J 99S-1 99~
Code. You may otot offer or impo$C any term> on the Work !hal alter nr restrict the ~nns of this License
or the red pi em.- exer"is~ of th~ •igbll; grante<l her.un<kr. Ynu mil)' not 'ut>licr:n;;e the Work _You mu •t
kc:cp intact a ll noli~"' that rder to thi~ Liccno;c ~nd to the disd l!imer of v•..-r.mtie~. You otta)' not
Submission of Contrihutinn<
Unle"" You ~Aplicitl)• state otherwir.e, nny Contribution i~t<:ntion~ll~ suhmiued for i nclu~ion in the Work hy
You to th~ Uc~n~r shoJI be under the terms and conditions oftl>i~ Liu n >e, without any additionalterrm. or
conditions.
agreement you may ha~e e •ectued with Licensor
Original SSLeay
You 0\~)· distribute \he E.~ecut&blc ~11cs ar>d Source Cod• only under the temtsofth is Licen:<;e. a nd You
mu\t incluc:k a cc:>py of, rn- the IJmfnrm Resuu!'('e Identifier for, thi~ Lice n>e with eve'}' \XIp)' of the
Excrutablc Piles nr Source Code You distribute m d cMurc that ~nyon~ rn:ri,·ing such E.~ecutable Files
and Sourcc Code agrtes tha.tthe tennsof thi• Licenseapply to sucii iO~ecutabl e Fila and/(>I' Source
RediSI.ribc>tion
Yo u may reproduce and distrib~t~ ~-...pi(> nf 1~e Work or Oeri•"'i"e Wort.s th~reof in any medium. with or
without modification<, and in Source(>I'Objectforon. pruvided!hat Ynumectthc following con~itions:
()penSSLLicense
Redistributions inhinaryfonnmuotreproduce the U.Ove copy rigbt nnlicc,thi!.Listof condition• and the
following disclaimer in the documentation andfur other materials pro~ided with tM disuihulinn
th<:-priorwrin~n con..:nt of lhc Autllor.
You ~gree not to ,;ell. lease. or rent ~ny p lt1 of t!t~ W"'~- Thi~ docs n()[ rescrk t you from including the
Work or any pan u f thl: Work inside! a lllfler software dimibutoQfl th:ot it<elf Is being ~I d. The Work by
it.elf, thuugh. canoot hesold, le.a~ orrt:med
G rnnt of P:ltent Licen se.
Subj ect to thc tcnns a nd conditiom n f tllis Li« n>e. c ach Cuntrihutor l>cretry grants to You a perpctual,
worklwkle. non-exclusive.oo -chargc, roy~lty· free . irrevncabl.: (u cept as •tate<l in thi> s.ectiun)patentlicens.e
to mske , have m~. u&e:, u!Ter to ..,n, o;cll. impnrt, aold otherwise tr.u1sfer the Work, v.·hcre 1uch lico:nse
applicsonlytOthO'>C'JI'I!Cn!claims hccn!lhle bysuch Contributur that arenece..arilyinfrin)!l'dby lheir
Conuibution(s) alone or by c ombination of the ir C<J ntrii:Uion(~) ,.·ith the Wor\., 10 which •uch
Contrihutim (s) was sobmitted . If You in<titutc patent litigation against any entity (including a cr(}<Ss-d aim"'
CQ\Inle" laim in a la wlillit) alleging that the U.'ork or a Cuntribution inc"'l"'r~ted within th~ \Vnrk constitute<
direct or n mtributory patent infringement. then any p,atem liccftsa; granted to You under this Lo~~n~e fOf that
(10) OpenSSL
2.
The name of the Autllor may not be ~ed tn cndon.e or prum01e product• derived from the Wor~ without
ContribuiO< hereby grant> to You a perpetual.
wurldwide,non-exclusi•·e, IIQ·Churgc. royalty·frcc.irrem('lbkcopyright licen..: to reprud~ce, prcpare
53. mailto: uuruoU@nc.fukuoka-u.ac.jp
6.
Licet•~~. e~ch
lkri•·ati,-e Works of. publidy d isplay. rublicly pcrfonn. subliceosc.Knd di<trihutc the Work a nd •uch
D eri•·ati,·e Worh in Soutee or O bj ect form
55. maillo: Ulrich.Windl @rz.uni-r~ensburg.de
lbe OpenSSL toolkit stays under a duallicen!lf', i.e. OOth the condition• of !hi: OpenSSL Licen,;c and the original
SSLe.ay licen<;e appl)· to the toolkit. See below for the w uallicen$C 1C~II. Actually both licenses 11rc S SD-5tylc
Open Sou"e licen'ICJ. In case of My Ji~-ense is.wcs related to OpenSSL please cuncact opcnssl-core@openliSI.crg
You agree not. to rcmu~e any nfthe o rigina-l copyright, patent, trademarl<. and awihutko<t notice-s llltd
lS!;OCialed disclaimers that rn.oy appear in the Soun:e Code or e_,.,cut~blc File"You agree nn1 tn adw rtiscnr in any way imply that this Work is a p<odoct of Your own
f.
51. mailto : ken@sdd.hp.com
52. mailtn: • j it@..:.udcl.edu
54.
Restrictions_ The license ~ntcdin Section 3 abm·e i~ npressly millie subject ~• lind limilal by the following
restrictions:
d
Grnnt uf Copyright Licet~sc
Subj ect to lhe tcnn• and conditions of this
4 7. mail!o:schnitzlif unipn:ss.oom
50. mlilto: harlan@ pfc~.com
pa~ent lic ense to make. ha,·e made. use. impon,and othcrwise tran>ferthcY.."ork.
5.
di<tril>ute the ExecutableFi lcs or SourceCnde wit h a ny t~chnnlogicalme::o""n:s that oontrol ac.:essnr
48. mailto: sllields®tembe!.ocg
mail!o: pebble~.jrl.na.~a.gov
An)· subroutine• or mu<lole~ supplied b)' You and linked into the Source Code 0<' E~ecut.olllc File$ this Wurk
ihall nnt be co n>idcrcd part of this Work art<l will not be subject ~o the term• uf this Lice nw:
Patent License. Subject tn the t~rm!! and conditions of this Lic~me. each Auth-or t-..rd:T~ grants to You a
pe rpetual. worldwide. non-uc losi~e. no-charge. f<l)•alty-free. irre~ocable (excepr u ~Uite<:l in thib !'I:Ction)
4.
"Contributor" shall mean Licensor and any indi>·idual o r l,.sal Entity o n b-ehalf ol' whom a Contribution ha.
becn rec.:i• edbyLicenw r •ndsuhsequcntlyinoorporat•d withinthc Worl<
41. maiho:d@bd.org
42. maillo: Rainer.Pruy@inronnatik.uni~rlangen.de
43. mailto: dirce@l.k3.dec.com
44. mailto: w~anchel@apple.ccm
45. mailtu: Ttlrllpple0qmoc k.kfu.com
46. mailto: jack @inno•ative imemet.oom
notic• in each c hanged file uating llow, when and
The An ides dis.:u~in~: the Wo rk published in any form by the author may nQt be di~tributed or
republi~hed without the Auth01 '.~ consc111. Tile author rct:1in~ rop~right to uny M~Ch Anicles. You may
use the E~ecutnblc ~-iks and Source-C ode purs~tlllt to 1his License but you may not rqll)st o r repub lish
or otherwis-e d iwihute or ma~e n~ailllhle the Article; , withOu1\he priO< wr~ten coos.:nl of t he Author.
"Contrihutinn" shall mea n any ,.w k nf authorship, including the origina l vcr~inn oftl>e Wllrk a old any
modificatiQfl~ or addition~ to that Work or lk'riv111i~e Worb tho.:rwf, 1hat i> intc ntiol\lllly submitted to
l.icenwr (or inclu~inn in the W01k by thecup~rightn"·neror b)-• an indi,·idua! 01 Legal l.!nti!~ authori1.ed to
submit <m behalf of t he oop~right owner. For the po,or~s of this 1kfinitiun. ·oubmin cd" means any rorm of
electronic. ve rbal , or ,.·rine n communication sent tn the Licensor or iu represemati,·es. inclllding but not
limited to oommunk•tion un electronic mailing !iSb. w un:c cOO.: wntrot s~stcm~, and issue !!".!eking
system~ thai are managed by, or on behalf of. the Liccn<,Qr for the purpose of dilc~ssing and improving the
Work. bul u cluditij!.COmmunk ation that is con>pictr-ously trnlfkcd Or QiheN isc designated in writing by tho<
cupyright OY<·ncr as " Not aCuntrihuti<'>n "
mail10: mayer@mp.org
promin~n(
You may distribute the standard ··~rsion of the E\eCUtable File' and Source Code or Derivati•-c Work in
aggregate w i1h other (possibly rommer(ial) pro1,7ams ~s part of ~ l~rgcr (pG'>.<ih ly oormnen:ial) software
disO'ibutiun
b.
mailto:lindhnlm@ue:..utx.o.:a
32. mailto:louie (illni.umd.edu
49.
d
medial~~
2 1. mailto:j~subo~.s-~fc.nas.a.gov
33.
34.
35.
W~ftware
·'Obje.;t'" form ~hall mean any fon n resulting (rout met:hanic• t transl'o rmation or tr~nolatiun of u Source
fonn. inc:loding hut nO! limited to compiled object code, geoen.~d documematlnn. and con,-ersio!ls to n1hor
19. mailto:glenn @helllld.usask.ca
20. mailto: igluias~ ~i.edu
31 .
Yo u may use the. st.anW.rd version nf 1he Snt>rce Code nr E~o:utahle Files in Your ov.n application<
You may appl~ hug li~es. ponabolity fixe.~ a nd Other toodific~tions obta in• d from the Public Do main or
frCMn the Autho•. A WOtk modillcd m such a way >hall 'till OC con>idered the slandard ~e.-.ion and will
bo•ubject tnthis Lkense
You may nt~erwise modify Your ~opy of thi' Work (exclud in~ the Artic le ~) in lillY "-ay to create a
Dcriomivc Wotk, provid~d that You insen a
where You ~hangedthatfole.
"Soun:e" form shall mean th~ prcfel'ftd form fot" makins modification•, including but not limit~d to
wurce ~ode. documentatio n source. and confi~uration file~.
16. mailto: duwe(limmd4.infoiTTIIItik.uni-e rtanJ en.de
17. mailto: denni~ti mrhiiJ.canct.ca
22.
l'•• Rights. ,'\'nthing in thi.• l.icen se is intended tn re~ucc, limil, or n:~oict any right> ari>in@_
from fair'u>e. fKirduling. firSisak' urothcr limit•tionson thecxclusivc rightoor the ~'<lp)'rigbt owoer under
~oprright law or other l pplicable la" ·s.
Liee nsc.
mai lto: Jeao-Francoi~.Bwdruult@viatenie.qc.~a
mailto : brl@owi.HQ.ilc:af.~otn
$re undcr rom1non rontN! with that e-ntity. For the purpQS<'S ofthi' definition. "COnltol" mc~ns (i) the power.
direct or indirect, to ~au,;e the d irection or manag~mem of such entity, whethor by contract or ntllcrw iS<', or
(ii) ownership o r fifty percent ( SO%) or more of the outstanding sllares. or (iii) bcrn:lkial nwncrmip of ~v.h
e ntity.
9.
"You'" i~ you,anind i\· idual memny wish ing to u.<e the Work andcxercis.eyourrights Uflllcrthis
llhrou~9ofthisdocument
mailto:vbaist4'mnilmanl.intcl.co
mllilto: kirkwoodQh tridcrfm.iotc l.rom
mllilto: micllael.barooe@lrTIOO.rom
accordance with th~ con"" Ill o f the Author. ' ""h consent boing in the full discretion uf the Author.
' Wnrk" rd'e n<tothe coll«tionof tiles d istribute<l by thc:Pubhshe•. including the Sou«'<'Cude,
Executahle Files. binaries , data tiles , docume ntation. whitepupe~ and tl>c Anicles
Limitmiun ofLiabilit~.
lnno eventand under no legal theOr)·.wt-..ther intun (ind uJ ing neglige ncc).contn ct, urutherwi!'l:, unk:ss
required b~ applicahle law (such u ddiber,lle and gros~ly negligent acts) or agr.:ed tU in writing , <hJll any
Contributor he liable tu You for damage~. incl~dinl! any d irect, i"'lirc<.1 , spe<:i&l, in~idental, or con sc:q....,ntial
damages of an~ chllract~ :trising a' a n:., ult of thi' License or out o f the use or inability w u!'e the Wurk
(iocluding hut not limit<:<! to damages fur loss of goodwill, v.-ork stoppage. computer failure or malfunction ,
http:I/W<I.CO.U~/pinknoi>e/tremQ]O
Co pyright (C) 2(Xl2-2ll0':1 Xiph.ors FounJ~tiun Cbanse~ C opyright (C ) 2009-2010 Rohon Wan~ for Pinknoise
Production~ Ltd
Redistribution and w;e in <OU<ce and binary forms, ,.-ith ur ,.·ithout modification. arc permitted prm·ided that the
following conditions a rc met
R•disrrih;Jtion~ of <!Jure~ ccxk mu'-1 retain the abm·e copyright notice. thi• list of condition• and th~
follow ingdio;claimer
Redi st ributionsinhinaryf(>l'm mu~lreprodoce theabo•· e copyrightnot(ce, th is listofconditioosand t he
following disclaimu in the docume11tatio n andlnr otl>cr materials pro•ided with the distrihutinn
· Neither the name of the Xiph.01g Foundati0<1 nor th~ names of it> contributors may be u..,.) lu endor!.L\ or
promutc product<dcriv~d from this software without ~pecific priOt written pennis_, ion.
T HIS SOFT\\'ARE fS PROVIDED BY T H F. COPYRIGHT HO LDERS AND COt\' TRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WAR RANT IES, 11\CL UOING . BUT NOT LIMITED TO. TliE IMPLIED
WARRA NTIES OF MERC:H ANTA BIUTY 1\:-.'D l'lT:-.'F.SS I"'R A PARTICl.iL AR PUiotPOSF.AR E
U!SClAIMED. IN NO EVENT SIIALLTHIO FOUNDATION OR CONT R!Bl:TOiotS BE LIABLE FOR ANY
DtRF:Cf. 11\' 0IRF.CT, IKC IDENTAL, SPF.CIAl., F.XF.~1PI.ARY, OR CONSEQUEKTIAL DAM AGES
(INCL UDING. II liT NOT liM ITEll TO. I'ROCUREMENT O l' SUHSTIT UTE GOODS O R SERVIC ES; LOSS
O F lJSE, DATA, O R PROFITS; O R BUSINESS INTERRUPTIOX) HOW F.V.,;R CALIS EO AND ON ANY
T HP..O RY OF LIAH ILIT Y. W HETHER IN 00:\'TRACf, STR!CT 1.1.·\ BIL!T Y. OR TORT(!NO .UOING
SN 29401 470A
Y131 1-2
On kyo USA Corporation Limited Consumer Warranty (USA)
On kyo USA Corporation Consumer Warranty (Canada)
PLEASE RETAIN YOUR ORIGINAL BILL OF SALE AS YOU WILL NEED TO PRESENT IT SHOULD YOU REQUIRE SERVICE UNDER THIS WARRANTY.
PLEASE RETAIN YOUR ORIGINAL BILL OF SALE AS YOU WILL NEED TO PRESENT IT SHOULD YOU REQUIRE SERVICE UNDER THIS WARRANTY.
Onkyo USA Corporation (hereinafter referred to as On kyo) hereby warrants all On kyo brand products PURCHASED DIRECTLY FROM
On kyo OR FROM AN INDEPENDENT On kyo AUTHORIZED DEALER in the UNITED STATES,
On kyo USA Corporation (hereinafter referred to as Onkyo) hereby warrants all Onkyo brand products PURCHASED DIRECTLY FROM
On kyo OR FROM AN INDEPENDENT On kyo AUTHORIZED DEALER IN CANADA,
in accordance with the following terms and conditions:
in accordance with the following terms and conditions:
''N;Iqjl;mnagqr•l•J (from date of purchase):
aWr.ljliW!Qf3JirtltJ (from date of purchase):
New Products:
New Products:
Refurbished Products:
Refurbished Products:
Receivers, Amplifiers, Tuners, Processors, CD,
DVD Players, Speaker Systems, Mini Systems
Receivers, Amplifiers, Tuners, Processors, CD,
DVD Players, Speaker Systems, Mini Systems
1 year Parts & Labor
SCOPE OF WARRANTY
1 year Parts & Labor
f1<•W•1JYftlQil;lb" ,.,
From the date of original consumer purchase and for the respective periods specified above, On kyo agrees to repair, at its sole expense, all On kyo brand
products purchased directly from On kyo or from an Independent On kyo Authorized Dealer, which are defective in material and/or workmanship during
ordinary consumer use. Repairs may be completed using new or refurbished parts that meet or exceed On kyo specifications for new parts. On kyo, at its sole
discretion, may replace a product, with a refurbished or reconditioned unit having comparable features and a limited consumer warranty.
From the date of original consumer purchase and for the respective periods specified above, On kyo agrees to repa ir, at its sole expense, all On kyo brand
products purchased directly from On kyo or from an Independent Onkyo Authorized Dealer in Canada, which are defective in material and/or workmanship
during ordinary consumer use. Repairs may be completed using new or refurbished parts that meet or exceed On kyo specifications for new parts. On kyo, at
its sole discretion, may replace a product, with a refurbished or reconditioned unit having comparable features.
EXCLUSIONS:
IF YOU PURCHASE AN Onkyo BRAND PRODUCT FROM AN UNAUTHORIZED DEALER, YOUR Onkyo WARRANTY MAY NOT BE VALID,
EXCLUSIONS:
IF YOU PURCHASE AN Onkyo BRAND PRODUCT FROM AN UNAUTHORIZED DEALER, YOUR Onkyo WARRANTY MAY NOT BE VALID,
please use our authorized dealer locator.
This Warranty does not apply with respect to or cover the following:
1. Defects or damage caused by accident, fire/smoke, flood/ water damage, power surge (or related electrical abnormalities), lightning or other acts of nature.
2. Defects or damage caused by abuse, misuse, negligence, accident, unauthorized product modification or service, or failure to observe the instructions
contained in the manual furnished at the time of orig inal purchase.
3. Deterioration/failure due to corrosive atmosphere, including but not limited to; smoke, high humidity or extreme temperature.
4. Damage caused during shipment or handling.
5. Products purchased from anyone other than On kyo or an Independent On kyo Authorized Dealer. If you are uncertain as to whether a dealer is authorized,
please contact On kyo's Customer Relations Department or check the Dealer and Service Locator.
6. Products that have had their serial numbers altered or removed.
7. Products purchased in "AS IS" condition or noted as "DEMO~ "DISPLAY~ "OPEN BOX~ or"CLEARANCE~
8. Products that have been altered or repaired by anyone other than Onkyo or an On kyo authorized independent service station in a manner that has
affected the ir performance, stability or reliability.
9. Accessories attached to or to be used with On kyo products, such as antennas, batteries, cables, etc.
10. Any product attached to or used with the On kyo Product.
11. Packing materials and cosmetic items.
12. Parts which have prescribed useful lives dependent upon the degree of their use, such as styli, cassette heads, idler wheels, batteries, etc.
13. Installation and removal of On kyo products, setup, adjustments or signal reception issues.
14. Maintenance, cleaning or periodic check-ups.
15. Adjustments or alterations required for compatibility with conditions pertaining to foreign countries.
please use our authorized dealer locator.
This Warranty does not apply with respect to or cover the following:
1. Defects or damage caused.by accident, fire/smoke, flood/water damage, power surge (or related electrical abnormalities), lightning or other acts of nature.
2. Defects or damage caused by abuse, misuse, negligence, accident, unauthorized product modification or service, or failure to observe the instructions
contained in the manual furnished at the time of original purchase.
3. Deterioration/failure due to corrosive atmosphere, including but not limited to; smoke, high humidity or extreme temperature.
4. Damage caused during shipment or handling.
5. Products purchased from anyone other than On kyo or an Independent On kyo Authorized Dealer. If you are uncertain as to whether a dealer is authorized,
please contact On kyo's Customer Relations Department or check the Dealer and Service Locator.
6. Products that have had their serial numbers altered or removed .
7. Products purchased in "AS IS" condition or noted as "DEMO~ "DISPLAY';"OPEN BOX'; or"CLEARANCE':
8. Products that have been altered or repaired by anyone other than On kyo or an On kyo authorized independent service station in a manner that has affected
their performance, stability or reliability.
9. Accessories attached to or to be used with On kyo brand products, such as antennas, batteries, cables, etc.
10. Any product attached to or used with the On kyo brand product.
11. Packing materials and cosmetic items.
12. Parts which have prescribed useful lives dependent upon the degree of their use, such as styli, cassette heads, idler wheels, batteries, etc.
13. Installation and removal of On kyo brand products, setup, adjustments or signal reception issues.
14. Maintenance, cleaning or periodic check-ups.
15. Adjustments or alterations required for compatibility with conditions pertaining to foreign countries.
16. Loss of, damage to or corruption of stored program or data.
OBTAINING WARRANTY SERVICE:
OBTAINING WARRANTY SERVICE:
To obtain warranty service, take or ship your On kyo product to an On kyo Authorized Independent Service Center. together with a note describing your
complaint and your copy of the dated purchase receipt. Repairs are not performed at our headquarters; all repairs must be performed by our On kyo
Authorized Independent Service Centers. For a list of Onkyo Authorized Independent Service Centers please go to; www.onkyousa .com, under, Support.
Please also include in any mailing; a contact name, address and email address or telephone number. If you choose to ship your On kyo product to an On kyo
Authorized Independent Service Center. all shipping arrangements must be made by you and all shipping charges and insurance must be fully prepaid. Any
On kyo product shipped in its entirety must be properly packaged to avoid shipping damage. Any shipping damage incurred as a result of improper or
insufficient packaging will be the responsibility of the shipper. On kyo will pay all return shipping charges for On kyo products that have been serviced under
this warranty. Any service or repair for items not covered by this limited warranty shall be at the Authorized Independent Service Center's rates and terms then
in effect. Contact an On kyo Authorized Independent Service Center for details.
To obtain warranty service, take or ship your On kyo brand product to an On kyo Authorized Independent Service Center, together with a note describing your
complaint and your original dated purchase receipt. Repairs are not performed at our headquarters; all repairs must be performed by our On kyo Authorized
Independent Service Centers. For a list of On kyo Authorized Independent Service Centers please go to; www.onkyo.ca, under, Support. Please also include in
any mailing ; a contact name, address and email address or telephone number. If you choose to ship your On kyo brand product to an On kyo Authorized
Independent Service Center, all shipping arrangements must be made by you and all shipping charges and insurance must be fully prepaid. Any On kyo brand
product shipped must be properly packaged to avoid shipping damage. Any damage incurred as a result of improper or insufficient packaging will be the
responsibility of the customer or the shipper. On kyo will pay all return shipping charges for Onkyo brand products that have been serviced under this warranty.
Any service or repair for items not covered by this limited warranty shall be at the Authorized Independent Service Center's rates and terms then in effect.
Contact an On kyo Authorized Independent Service Center for details.
LIMITATIONS:
On kyo makes this warranty subject to the following limitations:
1. This limited Warranty is valid only within the continental United States of America, Hawaii and Alaska. To be covered by this warranty the On kyo product
concerned must have been purchased directly from Onkyo or an Independent Onkyo Authorized Dealer and the person seeking warranty service must
reside in one of the states of the United States of America or in the District of Columbia. This warranty extends only to the original retail purchaser and
cannot be transferred to anyone.
2. On kyo SHALL HAVE NO LIABILITY WHATSOEVER FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. THE RESPONSIBILITY OF Onkyo UNDER THIS
WARRANTY SHALL BE LIMITED TO THE REPAIR OR REPLACEMENT OF DEFECTIVE On kyo PRODUCTS BY On kyo OR ITS AUTHORIZED INDEPENDENT SERVICE
CENTERS.
3. This warranty is valid only with respect to repairs affected by Onkyo or an On kyo authorized independent service center.
4. ALL WARRANTIES OTHER THAN THE EXPRESS WARRANTY HEREIN CONTAINED INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANT
ABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow limitations on how long an implied warranty lasts and some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other
rights that vary from state to state.
LIMITATIONS:
On kyo makes this warranty subject to the following limitations:
1. This limited Warranty is valid only within Canada. To be covered by this warranty the On kyo brand product concerned must have been purchased directly
from On kyo or an Independent On kyo Authorized Dealer in Canada and the person seeking warranty service must reside in Canada. This warranty extends
only to the original retail purchaser meeting the above requirements and cannot be transferred to anyone.
2. On kyo SHALL HAVE NO LIABILITY WHATSOEVER FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS, DEEMED OR
IMPLIED WARRANTY OR CONDITION, OR FOR LOSS OF, DAMAGE TO OR CORRUPTION OF ANY PROGRAM OR DATA STORED IN OR USED WITH THE PRODUCT.
THE RESPONSIBILITY OF Onkyo UNDER THIS WARRANTY IS AND SHALL BE LIMITED TO THE REPAIR OR REPLACEMENT OF DEFECTIVE On kyo PRODUCTS BY
On kyo OR ITS AUTHORIZED INDEPENDENT SERVICE CENTERS.
3. This warranty is valid only with respect to repairs made by Onkyo or an On kyo authorized independent service center.
4. EXCEPTTO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED CONDITION OR WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, OR DEEMED CONDITION OR WARRANTY UNDER APPLICABLE CONSUMER LAW, IS LIMITED IN DURATION TO THE APPLICABLE WARRANTY PERIOD
SET FORTH ABOVE.
Some jurisdictions do not allow limitations on how long an implied warranty lasts and some jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other
rights that vary from jurisdiction to jurisdiction.
Garantie d'Onkyo USA Corporation (Canada)
ONKYO
VEUILLEZ CONSERVERVOTRE FACTURE ORIGINALE PUISQUE VOUS DEVREZ LA PRESENTER POUR VOUS PREVALOIR DU SERVICE AUX
TERMES DE LA PRESENTE GARANTIE. On kyo USA Corporation (ci-apres appelee On kyo) garantit taus les produits de marque Onkyo
ACHETES DIRECTEMENT AU PRES D'ELLE OU D'UN MARCHAND INDEPENDANT AUTORISE AU CANADA,
conform€ment aux modalites et conditions suivantes:
Product Registration (USA and Canada)
i@T![!f!!i;ffMbM!!.!.
. .-------···-·-·-·- -------------------------------
•aa;rr•Iil)•J;JcfjljljUU'J (a compter de Ia date d'ac hat):
Nouveaux produits:
www.onkyousa.com can assist you anytime with Frequently Asked Questions, Hookup Diagrams, and Service Information.
www.onkyo.ca is available for Canadian customer
Produits rem is a neuf :
We offer Product Support 7 days per week
Recepteurs, amplificateurs, syntoniseurs, processeurs, lecteurs CD,
lecteurs DVD, systemes de haut-parleurs, minichaines
On kyo has extended its product support hours to a seven-day schedule. For questions, assistance, or comments,
please call us or visit on our website at:
PORTEE DE LA GARANTIE
a
A compter de Ia date de l'achat initial et durant les p€riodes pr€cis€es ci-dessus, On kyo accepte de reparer, ses frais, tousles produits de marque On kyo
achetes directement au pres d'elle ou d'un marchand ind€pendant auto rise On kyo au Canada qui pr€sentent des vices de materiaux et/ou de fabrication au
cours de !'utilisation normale.les reparations peuvent etre effectuees au moyen de pieces neuves ou remises neuf qui respectent ou d€passent les
specifications etablies par On kyo pour les pieces neuves. Onkyo, son entiere discretion, peut remplacer un produit par une unite remise neuf ou remise en
etat ayant des caracteristiques com parables.
a
a
a
EXCLUSIONS:
0.1-800-229-1687
~ www.onkyousa.com/support (For USA customers)
www.onkyo.ca/support (For Canadian customers)
S/ VOUSACHETEZ UN PRODUIT DE MARQUE Onkyo AUPRES D'UN MARCHAND NON AUTOR/St, VOTRE GARANTIE D'Onkyo POURRAIT NE PAS £TRE VAL/DE;
veuillez utiliser notre Joca/isateur de marchand autorise.
La presente garantie ne s'applique pas
al'egard des elements suivants:
1. Les dE!fectuosites ou les dommages causes par un accident, un incendie ou de Ia fumee, une inondation ou de !'infiltration d'eau, une saute de puissance
(ou des anomalies electriques connexes), Ia foudre ou d'a utres calamites naturelles.
2. Les detectuosit€s ou les dommages causes par un usage abusif, une mauvaise utilisation, un accident, une mod ification ou un entretien non autoris€ du
produit ou le d€faut de suivre les instructions du manuel fourni au moment de l'achat initial.
3. Une deterioration/ defaillance en raison d'une atmosphere corrosive, notamment de Ia fumee, un taux €Ieve d'humidite ou une temperature extreme.
4. Les dommages causes au cours de Ia livraison ou Ia manutention.
S. Les produits achetes aupr€s d'une personne autre que On kyo ou qu'un marchand independant autorise On kyo. Si vous ignorez si un marchand est
autorise, veuillez commun iquer avec le service a Ia clientele d'Onkyo ou consulter le localisateur de marchand et de centre de service.
6. Les produits dent le numero de serie a ete modifie ou efface.
7. Les produits achetes « TEL QUEL » ou identifies com me « Dt.MONSTRATEUR '', « MODt.LE DU PRESENTOIR », ((BOlTE OUVERTE » ou « LIQUIDATION ».
8. Les produits qui ont ete modifies ou repa res par une personne autre que On kyo ou qu'un centre de service independant auto rise On kyo de fa<;on a
affecter leur rendement, leur durabilite ou leur fiabilite.
9. Les accessoi res attaches aux produits de ma rque On kyo ou devant €tre utilises avec ceux-ci, com me les antennes, les piles, les cables, etc.
10. Tout produit attache au produit de marque On kyo ou devant etre utilise avec celui-ci.
1 1. Les materiaux d'emballage et les elements de presentation.
12. Les piE-ces qui ont une duree de vie utile prescrite en fonction de leur utilisation, com me les stylets, les tetes de lecture, les engrenages, les piles, etc.
13. l'installation et le demontage des produits de marque On kyo, Ia configuration , les ajustements ou les probl€mes de reception du signal.
14. L'entretien, le nettoyage ou les mises au point periodiques.
1S. Les ajustements ou les modifications necessaires pour assurer Ia conformite aux normes de pays etrangers.
16. La perte ou Ia corruption de donnees ou de programmes stockes ou les dommages ceux-ci.
On kyo USA Corporation
18 Park Way, Upper Saddle River, NJ 07458
Phone: 201-785-2600 Fax: 201 -934-7823
Nous vous remere ions d'avoir achete ce produit On kyo. Pour proteger votre investissement et pour recevoir de
!'information sur nos nouveaux produits ainsi que des mises a jour, veuillez enregistrer votre produit. Pour ce fa ire,
consultez notre site Web aux adresses suivantes:
www.us.onkyo.com/prodreg_form.cfm (pour les clients des Etats Unis)
www.onkyo.ca/prodreg_form.cfm (pour les clients du Canada)
a
EXECUTION DE LA GARANTIE:
a
Pour fa ire executer Ia garantie, veuillez remettre ou expedier votre produit de marque On kyo un centre de service ind€-pendant autorise On kyo, avec une
note d€crivant le probleme et votre re~u d'achat original date.Les reparations ne sent pas effectu€-es notre siege social; toutes les reparations doivent etre
effectuees par nos centres de service independants autorises On kyo. Pour consulter une liste des centres de service independants autorises On kyo, veui llez
aller au www.onkyo.ca, sous l'onglet Support. Veui llez egalement inclure dans tout envoi postalle nom de Ia personne joindre, son adresse et son courriel
ou son numero de telephone. Si vous choisissez d'expedier votre produit de marque On kyo un centre de service independant autorise Onkyo, vous devez
prendre les dispositio ns necessaires pour assurer Ia livraison et regler d'avance !'ensemble des frais et des assurances lies Ia livraison. Tout produit de marque
On kyo expedie do it etre emba lle de fa~on appropri€e pour eviter les dommages causes en cours d'expedition.Le consommateur ou l'exp€-diteur sera
responsable l'egard de to us dommages sub is en raison d'un emballage inapproprie ou insuffisant. On kyo paiera Ia totalite des frais d'expedition de retour
pour les produits de marque On kyo dent Ia garantie a ete executee.Les services fournis ou les reparations effectuees a l'egard d'elements qui ne sont pas
couverts par Ia presente garantie limitee seront effectues selon les tarifs et les modalites en vigueur du centre de service ind€-pendant autorise. Pour obtenir
plus de details, communiquez avec un centre de service autorise On kyo.
a
a
a
a
a
Vous pouvez obtenir de l'a ide en tout temps sur le site www.onkyousa.com en consultant les sections
Frequently Asked Questions. Hookup Diagrams et Service Information. Les clients canadiens peuvent quanta eux
consulter le site www.onkyo.ca .
Nous offrons un soutien technique 7 jours sur 7
On kyo offre maintenant un soutien technique 7 jours sur 7. Pour obtenir de l'aide, des reponses aVOS questions,
ou pour soumettre vos commentaires, veuillez communiquer avec nous par telephone ou consulter notre site Web:
LIMITATIONS:
On kyo donne Ia presente garantie sous reserve des limitation s su ivantes:
1. La presente garantie limitee n'est valide qu'au Canada. Pour etre couvert par Ia pr€-sente garantie, le produit de marque Onkyo en cause doit etre achet€directement aupres d'Onkyo ou d'un marchand independant autoris€ Onkyo au Canada et Ia personne qui desire se prevaloir de Ia garantie doit etre un resident
du Canada.La pr€sente garantie ne vise que l'acheteur d'origine respectant les exigences susmentionnees et elle ne peut etre cedee a une autre personne.
2. On kyo N'ASSUME AUCUNE RESPONSABILITE DE QUELQUE NATURE QUE CE SOIT EN CAS DE DOMMAGES SPtoAUX, CONSECUTIFS OU INDIRECTS EN RAISON DE
LA VIOLATION D'UNE GARANTIE OU CONDITION EXPLICITE, RtPUTtE OU IMPLICITE, OU DE LA PERTE, DE L:ENDOMMAGEMENT OU DE LA CORRUPTION DE TOUTE
DONNEE OU TOUT PROGRAMME STOCKE DANS LE PRODUIT OU UTI LISt AVEC CELUI-CI. LA RESPONSABILITE D'Onkyo AUX TERMES DE LA PRESENTE GARANTIE SE
LIMITE A LA REPARATION DES PRODUITS On kyo DEFECTUEUX PAR Onkyo OU PARSES CENTRES DE SERVICE INDEPENDANTS AUTORIStS.
3. La presente garantie n'est valide qu'a l'€gard des reparations effectuees par Onkyo ou par un centre de service independant autorise On kyo.
4. SAUF DANS LA MESURE INTERDITE PAR LES LOIS APPLICABLES, TOUTES LES CONDITIONS OU GARANTIES IMPLICITES DE QUALITE MARC HAN DE OU DE
CONVENANCE A UNE FIN PARTICULitRE OU TOUTES LES CONDITIONS OU GARANTIES RtPUTtES EN VERTU DES LOIS APPLICABLES SUR LA PROTECTION DES
CONSOMMATEURS SONT D'UNE DUREE LIMITEE CONFORMEMENT A LA DUREE DE LA GARANTIE APPLICABLE SUSMENTIONNEE.
Certains territoires n'autorisent aucune restriction sur les garanties implicites ni !'exclusion ou Ia limitation des dommages consecutifs ou indirects de sorte que les
limitations ou les exclusions susmentionnees pourraient ne pas s'appliquer dans votre cas. La presente garantie vous confere des droits precis et vos droits pourraient
varier selon les territoires.
tiill¥hll1llitJ 1-800-229-1687
.1fmW11iW www.onkyousa.com/support (pour les clients des Etats Unis)
www.onkyo.ca/support (pour les clients du Canada)
Onkyo USA Corporation
18 Park Way, Upper Saddle River, NJ 07458
Telephone: 201-785-2600 Telecopieur: 201-934-7823
SN:29365156