Philips 32PFL3509/F7 User's Manual

Register your product and get support at
www.philips.com/support
32PFL3509
EN User Manual
EN For further assistance, call the customer support service in your country.
To obtain assistance, contact Philips Customer Care Center;
•
In the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands 1 866 309 8147
México D.F. and Área Metropolitana; 58 87 97 36
Interior de la Republica; 01 800 839 19 89
ES Manual del Usuario
ES Para obtener más información, llame al servicio de soporte al cliente de su país.
•
Para obtener asistencia, comuníquese con Centro de atención al cliente de Philips;
FR Manuel d’Utilisation
En los Estados Unidos, en Canadá, Puerto Rico o en las Islas Vírgenes de los
Estados Unidos; 1 866 309 8147
México D.F. y Área Metropolitana; 58 87 97 36
Interior de la Republica; 01 800 839 19 89
FR Pour obtenir de l’aide supplémentaire, communiquez avec le centre de service
à la clientèle de votre pays.
•
Pour obtenir de l’aide, communiquez avec le centre de service à la clientèle Philips au;
Dans le États-Unis, au Canada, à Puerto Rico ou aux Îles Vierges américaines; 1 866 309 8147
México D.F. et Área Metropolitana; 58 87 97 36
Interior de la Republica; 01 800 839 19 89
2 .English
Contents
1 Notice ......................................................................................................................... 5
2 Important ................................................................................................................ 6
Positioning the TV
Regulatory Notices
Environmental Care
Preparing to Move/Ship the Unit
6
6
6
6
3 Getting Started ............................................................................................... 7
Features
Supplied Accessories
Symbols used in this User Manual
Attaching the Base
Installing the Remote Control Batteries
Remote Control
Control Panel
Terminals
Connecting Antenna or Cable / Satellite / IPTV Box
Plugging in the AC Power Cord
Selecting your Connection quality
HDMI - Highest quality
Component (Y Pb Pr) - High quality
Composite - Basic quality
Connecting your Devices
HDMI Digital Connection
HDMI-DVI Connection
Component Analog Video Connection
Composite Analog Video Connection
Digital Audio Output Connection
PC Connection
USB Memory Stick
Initial Setup
7
7
7
8
8
9
10
10
11
12
12
12
12
12
13
13
13
13
13
13
14
14
15
4 Use your TV .................................................................................................... 17
Switching on your TV and putting it in Standby mode
Adjusting Volume
Switching Channels
Watching Channels from an External Device
Sleep Timer
Switching Audio Mode
EasyLink options
Changing Picture Format
TV Screen information
17
17
17
18
18
18
19
19
20
5 Making more use with your TV ............................................ 21
Displaying the Main Menu
Picture
Sound
Setup
Autoprogram
Channel list
Add channels
Antenna Confirmation
Features
Caption settings
Child and Ratings Lock
PC settings
EasyLink
Setting your Location to Home
E-sticker
Language
USB
21
22
23
24
24
24
25
25
25
25
27
29
30
31
31
31
32
6 Upgrade your TV Software ......................................................... 33
Checking your Current Software version
Upgrading the Software
7 Useful tips ...........................................................................................................
FAQ
Troubleshooting
33
33
34
34
35
8 Information ........................................................................................................ 36
Glossary
Maintenance
36
36
9 Specifications ................................................................................................... 37
10 Warranty .............................................................................................................
38
3 .English
Register Online at www.productrecords.com/phl today
to get the very most from your purchase.
Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don't miss out.
Register Online at www.productrecords.com/phl to ensure:
*Product Safety Notification
*Additional Benefits
By Registering your Product, you'll receive notification directly from the manufacturer - in the rare case of a
Product Recall or Safety Defect.
Know these
safety symbols
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The caution marking is located on the rear or bottom of the cabinet.
Registering your Product guarantees that you'll receive
all of the Privileges to which you're Entitled, including
special money-saving offers.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the apparatus’s enclosure
that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the apparatus.
WARNING:
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall
not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the
apparatus.
CAUTION:
ATTENTION:
To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Pour éviter les choc électriques,introduire la lame la plus large de la fiche dans la borne correspondante de la
prise et pousser jusqu’au fond.
Visit our World Wide Web Site at www.philips.com/support
CHILD SAFETY:
PROPER TELEVISION PLACEMENT MATTERS
THE CONSUMER ELECTRONICS INDUSTRY
CARES
• Manufacturers, retailers and the rest of the consumer
electronics industry are committed to making home
entertainment safe and enjoyable.
• As you enjoy your television, please note that all
televisions – new and old- must be supported on proper
stands or installed according to the manufacturer’s
recommendations. Televisions that are inappropriately
situated on dressers, bookcases, shelves, desks, speakers,
chests, carts, etc., may fall over, resulting in injury.
TUNE IN TO SAFETY
• ALWAYS follow the manufacturer’s recommendations
for the safe installation of your television.
• ALWAYS read and follow all instructions for proper use
of your television.
• NEVER allow children to climb on or play on the
television or the furniture on which the television is
placed.
• NEVER place the television on furniture that can easily
be used as steps, such as a chest of drawers.
• ALWAYS install the television where it cannot be
pushed, pulled over or knocked down.
• ALWAYS route cords and cables connected to the
television so that they cannot be tripped over, pulled or
grabbed.
CE.org/safety
WALL OR CEILING MOUNT YOUR
TELEVISION
• ALWAYS contact your retailer about professional
installation if you have any doubts about your ability to
safely mount your television.
• ALWAYS use a mount that has been recommended by
the television manufacturer and has a safety certification
by an independent laboratory (such as UL, CSA, ETL).
• ALWAYS follow all instructions supplied by the
television and mount manufacturers.
• ALWAYS make sure that the wall or ceiling where you
are mounting the television is appropriate. Some mounts
are not designed to be mounted to walls and ceilings
with steel studs or cinder block construction. If you are
unsure, contact a professional installer.
• Televisions can be heavy. A minimum of two people is
required for a wall or ceiling mount installation.
MOVING AN OLDER TELEVISION TO A NEW
PLACE IN YOUR HOME
• Many new television buyers move their older CRT
televisions into a secondary room after the purchase of a
flat-panel television. Special care should be made in the
placement of older CRT televisions.
• ALWAYS place your older CRT television on furniture
that is sturdy and appropriate for its size and weight.
• NEVER place your older CRT television on a dresser
where children may be tempted to use the drawers to
climb.
• ALWAYS make sure your older CRT television does
not hang over the edge of your furniture.
Important Safety Instructions
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10.Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11.Only use attachments / accessories specified by the
manufacturer.
12.Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or
sold with the apparatus. When a cart
is used, use caution when moving the
cart / apparatus combination to avoid
injury from tip-over.
Wall Mount Bracket Kit
Brand
32PFL3509
•
•
•
•
SANUS
Model #
SAN18B
Screw dimension
M4 x 1.181” (30mm)
with spacer
The recommended Wall Mount Bracket Kit (sold
separately) allows the mounting of the TV on the wall.
For detailed information on installing the wall mount,
refer to the Wall Mount Instruction Book.
P&F USA is not responsible for any damage to the
product or injury to yourself or others if you elect to
install the TV Wall Mount Bracket or mount the TV onto
the Bracket on your own.
The Wall Mount Bracket must be installed by experts.
4 .English
13.Unplug this apparatus during lightning storms or when
unused for long periods of time.
14.Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
Note to the CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.
Example of Antenna Grounding as per NEC - National
Electric Code
GROUND CLAMP
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
ELECTRIC SERVICE EQUIPMENT
POWER SERVICE GROUNDING ELECTRODE
SYSTEM (NEC ART 250, PART H)
P&F USA is not liable for these types of accidents or injury
noted below.
• Install the Wall Mount Bracket on a sturdy vertical wall.
• If installed onto a ceiling or slanted wall, the TV and Wall
Mount Bracket may fall which could result in a severe injury.
• Do not use screws that are longer or shorter than their
specified length. If screws too long are used this may cause
mechanical or electrical damage inside the TV set. If screws
too short are used this may cause the TV set to fall.
• Do not fasten the screws by excessive force. This may
damage the product or cause the product to fall, leading to
an injury.
• For safety reasons use 2 people to mount the TV onto a
Wall Mounting Bracket.
• Do not mount the TV onto the Wall Mounting Bracket
while your TV is plugged in or Turned On. It may result in an
electrical shock injury.
When installing the unit on the wall, allow this much space.
Top:
11.8 inches (30cm)
Left and right side:
5.9 inches (15cm)
Bottom:
3.9 inches (10cm)
5 .English
1 Notice
Modifications
Trademarks are the property of Koninklijke Philips N.V. or their
respective owners.
P&F USA reserves the right to change products at any time without
being obliged to adjust earlier supplies accordingly.
The material in this manual is believed adequate for the intended use
of the system. If the product or its individual modules or procedures
are used for purposes other than those specified herein, confirmation
of their validity and suitability must be obtained. P&F USA warrants
that the material itself does not infringe any United States patents. No
further warranty is expressed or implied.
P&F USA cannot be held responsible neither for any errors in the
content of this document nor for any problems as a result of the
content in this document. Errors reported to P&F USA will be
adapted and published on the P&F USA support website as soon as
possible.
This apparatus may generate or use radio frequency energy. Changes or
modifications to this apparatus may cause harmful interference unless
the modifications are expressly approved in the User Manual.The user
could lose the authority to operate this apparatus if an unauthorized
change or modification is made.
Cables
Connections to this device must be made with shielded cables with
metallic RFI / EMI connector hoods to maintain compliance with FCC
Rules and Regulations.
Canadian notice
CAN ICES-3 (B)/NMB-3 (B)
Standard Television Receiving Apparatus, Canada BETS-7 / NTMR-7.
Copyright
All other registered and unregistered trademarks are the property of
their respective owners.
Pixel characteristics
The terms HDMI and HDMI
High-Definition Multimedia Interface,
and the HDMI Logo are trademarks
or registered trademarks of HDMI
Licensing LLC in the United States
and other countries.
This LCD product has a high number of color pixels. Although it has
effective pixels of 99.999% or more, black dots or bright points of light
(red, green or blue) may appear constantly on the screen. This is a
structural property of the display (within common industry standards)
and is not a malfunction.
Warranty
Manufactured under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks of
Dolby Laboratories.
No components are user serviceable. Do not open or remove covers
to the inside of the product. Repairs may only be done by Service
Centers and official repair shops. Failure to do so shall void any
warranty, stated or implied.
Any operation expressly prohibited in this manual, any adjustments or
assembly procedures not recommended or authorized in this manual
shall void the warranty.
For DTS patents, see
http://patents.dts.com.
Manufactured under license from DTS
Licensing Limited. DTS, the Symbol, &
DTS and the Symbol together are
registered trademarks, and DTS
TruSurround is a trademark of DTS,
Inc. © DTS, Inc. All Rights Reserved.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits
for a Class B Digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio or television
technician for help.
Declaration of Conformity
Trade Name
: PHILIPS
Responsible Party
: P&F USA, Inc.
Model
: 32PFL3509
Address
: PO Box 2248, Alpharetta, GA 30023-2248
U.S.A.
Telephone Number
: 1 866 309 8147
ENERGY STAR® is a joint program of
the U.S. Environmental Protection
Agency and the U.S. Department of
Energy helping us all save money and
protect the environment through
energy efficient products and practices.
Consumer Notice:
This TV has been set to maximize energy efficiency while delivering
the best possible picture using the factory installed home mode
settings.
Changing or enabling other features in this TV (e.g. brightened
backlighting) will possibly increase energy consumption beyond the
original ENERGY STAR® qualified limits.
LED backlighting technology uses less
energy when compared with a
standard CCFL backlighting LCD
television of the same screen size.
Actual energy savings will vary
depending on the screen size.
Portions of this software are copyright © The FreeType Project
(www.freetype.org).
The American Academy of Pediatrics discourages television viewing
for children younger than two years of age.
2 Important
6 .English
Environmental Care
Positioning the TV
•
•
•
•
•
•
•
•
•
•
•
•
Large screen TVs are heavy. 2 people are required to carry and
handle a large screen TV.
Make sure to hold the upper and bottom
frames of the Unit firmly as illustrated.
Install the Unit in a horizontal and stable
position.
Do not install the Unit in direct sunlight
or in a place subject to dust or strong
vibration.
Depending on the environment, the
temperature of this Unit may increase slightly. This is not a
malfunction.
Avoid a place with drastic temperature changes.
Do not place anything directly on top or bottom of the Unit.
Depending on your external devices, noise or disturbance of
the picture and / or sound may be generated if the Unit is
placed too close to them. In this case, please ensure enough
space between the external devices and the Unit.
Do not insert the AC power cord into the power socket outlet
before all the connections are made.
Ensure that you always have easy access to the AC power cord
or plug to disconnect the TV from the power.
Before you move the TV, disconnect attached cables to prevent
damage to connectors.
Be sure to unplug the AC power cord from the AC outlet
before moving or carrying the Unit.
Regulatory Notices
Do not place the Unit on the furniture that is capable of being tilted by
a child and an adult leaning, pulling, standing or climbing on it. A falling
Unit can cause serious injury or even death.
This apparatus should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided.
Make sure to leave a space of 4 inches (10cm) or more around this
apparatus.
Press to turn the Unit on and go into standby mode.
To completely turn off the Unit, you must unplug the AC power cord.
Disconnect the AC plug to shut the Unit off when trouble is found or
not in use. The AC plug shall remain readily available.
The packaging of this product is intended to be recycled.
Contact your local authorities for information about how to recycle
the packaging.
For product recycling information, please visit - www.recycle.philips.com
End of Life Directives
Philips pays a lot of attention to produce environmental-friendly
products in green focal areas. Your new TV contains materials which
can be recycled and reused. At the end of its life, specialized
companies can dismantle the discarded TV to concentrate the
reusable materials and to minimize the amount of materials to be
disposed of. Please ensure you dispose of your old TV according to
local regulations.
Disposal of Used Batteries
The Batteries supplied do not contain the heavy metals mercury
and cadmium. Nevertheless, in many areas Batteries may not be
disposed of with your household waste. Please ensure you dispose
of Batteries according to local Regulations.
Preparing to Move/Ship the Unit
Please pack the Unit properly by following the Diagram on the
Carton.
1
2
3
4
To avoid damage to the Screen, do not pack the stand on the
same side as the TV screen.
AC plug
Never use a gas duster on this TV.
The gas trapped inside of this Unit may cause ignition and explosion.
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
WARNING: Batteries (battery pack or battery installed) shall
not be exposed to excessive heat such as sunshine,
fire or the like.
WARNING: To prevent injury, this apparatus must be securely
attached to the furniture / wall in accordance with
the instructions. Tipping, shaking or rocking the
unit may cause injury / death.
3 Getting Started
7 .English
Supplied Accessories
Quick Start guide
User Manual
Features
●
DTV / Analog TV / CATV
You can use your Remote Control to select channels which are Broadcast in Digital format
and conventional Analog format. Also, Cable and Satellite subscribers can access their TV
channels.
●
Information display
Remote Control
and Batteries
(AAA, 1.5V x 2)
You can display the Title, contents (DTV only) and other information of the current program
on the TV screen.
●
Autoprogram
This Unit Automatically scans and memorizes channels available in your area, Eliminating
difficult Setup procedures.
●
Child lock
●
Closed Caption decoder
●
MTS / SAP tuner
●
Auto Standby
TV base and Screws
Screws packed with this Unit.
Model
32PFL3509
This feature allows you to Block children’s access to inappropriate programs.
Quantity
Size
M4 x 0.551”(14mm)
3
Built-in Closed Caption decoder displays text for Closed Caption supported programs.
If there is no Input Signal and no operation for 15 minutes, the Unit will go into Standby
mode Automatically.
●
Sleep Timer
●
Choices for On-screen language
Note(s)
You can set the Unit to go into Standby mode after a specific amount of time.
●
Stereo sound function
●
PLL frequency synthesized tuning
●
Provides free and easy channel selection and lets you tune directly to any channel using the
number and decimal point “•” keys on the Remote Control.
●
Various adjustments for Picture and Sound
Customizes image quality suitable for your room and sets your sound preference.
●
EasyLink via HDMI link
EasyLink allows your other HDMI link devices to be controlled by the HDMI cable connected
to your TV.
●
HDMI Input
●
HDMI-DVI Input
Component Video Input
●
PC Input
●
Make sure the component code on your Universal Remote Control is set to our brand.
Refer to the instruction book accompanying your Remote Control for more details.
●
We Do Not guarantee 100% interoperability with All Universal Remote Controls.
Symbols used in this User Manual
The following is the description for the symbols used in this User Manual.
Description refers to:
If your Video Device has a DVI Output jack, use an HDMI-DVI Conversion Cable to connect
the Unit.
●
If you lose the Screws, please purchase the above-mentioned Phillips head Screws at your
local store.
If you need to replace these accessories, please refer to the part name or No. with the
illustrations and call our toll free customer support line found on the cover of this User
Manual.
When using a Universal Remote Control to operate this Unit.
Select your On-screen language: English, Spanish or French.
●
AAA
AAA
Audio can be selected from the Remote Control.
Digital TV Operation
Cable / NTSC (Analog) TV Operation
Input from a Computer.
●
AV Input
Audio and Video Input from an External Device.
●
USB terminal
The Picture (JPEG) and Video (Motion JPEG) files stored on a USB Memory Stick can be
played back on this Unit.
●
Digital Audio Output
Digital Audio (Supporting Dolby Digital) sent to Home Theaters and other Digital Audio
systems.
●
Headphone Audio Output
Headphone 3.5mm Stereo jack for personal listening.
●
If neither symbol appears, the operation is applicable to both.
8 .English
Attaching the Base
You must attach the base to the Unit to have it as a table top Unit.
Be sure the front and rear of the base match the proper direction. For
large screen TVs, at least 2 people are required for these steps.
1
2
1
2
×3
Note(s)
●
●
●
●
●
Make sure to use a table which can support the weight of this Unit and is larger than this
Unit.
Make sure the table is in a stable location.
When attaching the base, ensure that “FRONT” with “arrow” written on the bottom of
the base is downward. If it’s not downward, the 2 hooks don’t fit into the base.
When attaching the base, ensure that All Screws are tightly fastened. If the base is not
properly attached, it could cause the Unit to fall, resulting in injuries as well as damage to
the Unit.
To remove the base from this Unit, unscrew the Phillips head screws in step 2. Be careful
not to drop the base when you remove it.
Installing the Remote Control Batteries
1
2
Slide the battery cover off the back of the Remote Control.
3
Slide the cover back into position.
Insert the 2 Supplied Batteries (AAA, 1.5V). Be sure the + and –
ends of the Batteries line up with the markings inside the case.
Note(s)
●
Remove the Batteries if not using the Remote Control for an extended period of time.
Continued on next page.
9 .English
a B (POWER)
Turns the TV On from Standby or Off to Standby.
b EasyLink (HDMI CEC) buttons
Remote Control
a
b
q
p
o
c
d
e
f
n
g
h
m
i
K
: Begins or Restarts the Disc Playback.
F
: Pauses the Disc Playback.
C
: Stops the Disc Playback.
E/D
: Searches Backward or Forward through the Disc.
Note(s)
●
You must set On in the Master EasyLink ( L p. 19) to operate the above functions.
c SAP
Selects Audio mode (MONO / STEREO / SAP) / Audio language.
d Q (MENU)
Displays the main menu.
e T INFO
Displays Information about the current program.
f H I J K (NAVIGATION keys) / OK
Moves the cursor, Selects the On-screen Menu items.
g U OPTIONS
Opens EasyLink options menu.
Note(s)
●
l
j
k
You must set On in the Master EasyLink ( L p. 19) to operate the above functions.
h S SOURCE
Selects Connected Devices.
i CH + / –
Selects a Channel in the Memorized Channel Ring
(Low to High or High to Low).
j COLOR keys
Use these Keys according to the directions On-screen.
k 0 - 9 (NUMBER keys)
Used to enter a Channel / Program number.
• (DOT)
: Use with 0-9 to select Digital channels. For example,
to enter 2.1, press
PREV.CH
: Returns to the previously viewed Channel.
l V (MUTE)
Turns the Sound On and Off.
m VOL + / –
Adjusts the Volume.
n BACK
Returns to the previous Menu operation.
o FORMAT
Adjusts the Picture size on the TV screen.
p SLEEP
Sets Sleep Timer.
q CC
Displays the audio portion of programming as text superimposed
over the video.
Continued on next page.
10 .English
Control Panel
g
a
b
f
c
d
e
a VOL J / K
Adjusts the Volume.
VOL J : Volume Down
VOL K : Volume Up
In the Menu screen, moves the Cursor Left ( J ) / Right ( K ).
b CH H / I
Selects a Channel in the Memorized Channel Ring (Low to High or
High to Low). In the Menu screen, moves the Cursor Up ( H ) /
Down ( I ).
c MENU
Opens the Main On-screen Menu.
d SOURCE
Selects Connected Devices.
e B (POWER)
Turns the TV On and Off (Standby mode).
f Remote Control Sensor
Receives IR Signal from Remote control.
g Power On / Standby Indicator
(On : lights in white, Standby : no light)
h USB Terminal
Data Input from USB Memory Stick only.
Do Not Connect any Device to this terminal such as; Digital Camera,
Keyboard, Mouse, etc.
i Analog Audio (L/R) Input jacks
Connect Analog Audio Signals from;
● HDMI-DVI / Analog Audio (L/R) jacks Signal
Terminals
l
h
m
i
j
k
●
Component Video / Analog Audio (L/R) jacks Signal
●
Composite Video / Analog Audio (L/R) jacks Signal
PC Connection / Analog Audio (L/R) jacks Signal with Stereo Mini
3.5mm Plug Audio Cable on PC
Digital Audio Output jack
Digital Audio (S/PDIF) Output to Home Theaters and other Digital
Audio systems.
HDMI Input jack(s)
Digital Audio and Video Input from High Definition Digital Devices
such as DVD / Blu-ray Disc players, Cable / Satellite Set-top Boxes
and PC’s.
75 ohm Cable / Antenna Connection
Signal Input from an Antenna or Cable / Satellite Set-top Boxes.
Headphone Audio Output jack
Headphone 3.5mm Stereo jack for personal listening.
Component (Y/Pb/Pr) / Composite Video (VIDEO) Input jacks for
VIDEO
Composite Video Input (VIDEO) jack is a shared jack with
Component Video Input (Y) jack.
PC Input jack
VGA cable Connection for PC.
●
j
n
k
o
l
m
n
o
Continued on next page.
11 .English
Connecting Antenna or Cable / Satellite /
IPTV Box
Be sure your Antenna or another Device is connected properly before
plugging in the AC Power Cord.
If connecting a Set-top Box through Component Video Input
If the TV is connected to a cable / satellite set-top box via Component
Video Input, make sure you select the correct Component Video Source
by using S SOURCE.
If connecting to an Antenna through an RF cable
Any DTV Programs that are Broadcast in your area can be received for
free through an Antenna Connection.
RF cable
OUT
Audio (L/R) cables
IN
Cable
antenna
IN
IN
IN
OUT
Component (Y/Pb/Pr)
OUT
OUT
video cables
Connecting a Cable / Satellite / IPTV Box, Blu-ray Disc /
DVD Recorder via Composite Connectors and Analog
Audio
RF cable
If you connect a Set-top Box through an RF cable
If the TV is connected to a Cable / Satellite Set-top Box via a Coaxial
Connection, set the TV to channel 3/4 or the channel specified by the
service provider.
Do Not place your Recorder too close to the Screen because some
Recorders can be susceptible to Signals from the TV.
OUT
RF cable
IN
IN
RF cable
RF cable
antenna
OUT
IN
OUT
RF cable
Set-top Box
If the TV is connected to a Cable / Satellite Set-top Box via an HDMI cable,
make sure you select the correct Source by using SOURCE key on TV or
S SOURCE key on Remote Control.
Audio (L/R) +
Video cables
●
●
OUT
IN
●
●
HDMI cable
Set-top Box
Cable
Set-top Box
Set-top Box
OUT
Audio (L/R) +
Video cables
IN
Blu-ray Disc/DVD Recorder
Note(s)
●
●
IN
OUT
IN
IN
If connecting Cable / Satellite / IPTV Box using an HDMI cable
RF cable
Set-top box
If you have any question about the DTV’s Antenna, visit www.antennaweb.org for further
information.
Depending on your Antenna system, you may need different types of combiners (mixers)
or separators (splitters) for HDTV Signal. The minimum RF bandpass on these Devices is
2,000MHz or 2GHz.
For your safety and to avoid damage to this Unit, please unplug the RF Coaxial Cable from
the Antenna Input jack before moving the Unit.
If you did use an Antenna to receive Analog TV, it should also work for DTV reception.
Outdoor or attic Antennas will be more effective than a Set-top Box or inside Antenna.
To Turn On your reception source easily between Antenna and Cable, Install an Antenna
selector.
If you are not receiving a Signal from your Cable service, contact the Cable provider.
12 .English
Plugging in the AC Power Cord
Make sure All the Necessary Connections are made before the AC Power
Cord is plugged into an AC outlet.
Caution
●
Do Not connect the AC Power Cord to an AC Power Supply outside the indicated voltage
of this Unit (120V AC).
●
Connecting the AC Power Cord to a Power Supply outside of this range may result in
Unit failure, degradation or electrical shock.
No supplied cables are used with these connections:
●
Please purchase the Necessary Cables at your local store.
Before you connect the AC Power Cord:
Be sure other Devices are connected properly before plugging in the AC
Power Cord.
Selecting your Connection quality
Note(s)
●
Each time you plug in the AC Power Cord, no operations will be performed for several
seconds. This is not a malfunction.
HDMI - Highest quality
Supports high-definition Digital signals and gives highest picture and sound
quality. Video and Audio signals are combined in one cable. You must use
HDMI for full high-definition Video and to enable EasyLink (HDMI CEC).
Note(s)
●
Philips HDMI supports HDCP (High-bandwidth Digital Contents Protection).
HDCP is a form of Digital Rights Management that protects high definition content in Bluray Discs or DVDs.
Component (Y Pb Pr) - High quality
Supports high-definition Analog signals but gives lower picture quality than
HDMI. Component (Y/Pb/Pr) Video cables combine red / green / blue
Video cables with red / white Audio (L/R) Cables. Match the cable colors
when you connect to the TV.
Composite - Basic quality
For Analog Connections. Composite Video / Audio Analog cable usually
combine a yellow Video Cable with red / white Audio (L/R) Cables. With
this Unit, yellow cable must be connected to Y (green) jack on the
Component Video Input jacks.
Continued on next page.
13 .English
Connecting your Devices
Component Analog Video Connection
Component Analog Video Connection offers Better Picture quality for
Video Devices connected to the Unit.
HDMI Digital Connection
HDMI Connection offers the Highest Picture quality.
HDMI (High-Definition Multimedia Interface) transports high definition
Digital Video and multi-channel Digital Audio through a single cable.
If you connect to the Unit’s Component Video (Y/Pb/Pr) Input jacks,
connect Analog Audio Cables to the Analog Audio (L/R) Input jacks.
OUT
OUT
Audio (L/R) cables
Set-top box
or
Set-top box
or
IN
IN
ININ
Blu-ray disc player
or
OUT
IN
Component (Y/Pb/Pr)
OUT
video cables
Blu-ray disc/DVD
recorder
Note(s)
●
HDMI cable
The Unit accepts 480i / 480p / 720p and 1080i of Video signals for this Connection.
HD game console
Composite Analog Video Connection
Composite Analog Video Connection offers standard Picture quality for
Video Devices connected to the Unit.
HDMI-DVI Connection
This Unit can be connected to your Device that has a DVI Terminal.
Use an HDMI-DVI Conversion Cable for this Connection and it requires
Audio Cable for Analog Audio signal as well.
IN
IN
IN
Audio (L/R) cables
If you connect to the Unit’s Component/Composite Video (Y/VIDEO)
Input jack (green), connect Audio Cables to the Audio (L/R) Input jacks.
When the Audio is monaural, then only connect to the Audio L Input
jack.
Cable Receiver or
Satellite Set-top Box
with the DVI Output jack
OUT
OUT
IN
IN
OUT
OUT
Audio (L/R) +
Video cables
DVD player
HDMI-DVI
OUT
conversion cable
Note(s)
Note(s)
Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI cable
is recommended for the Better compatibility.
For HDMI Connection
●
●
The Unit accepts 480i / 480p / 720p / 1080i, 1080p 24/30/60Hz of Video signals, 32kHz /
44.1kHz and 48kHz of Audio signals.
●
This Unit accepts 5.1 channel Audio signal (Dolby Digital) and 2 channel Audio signal
(LPCM).
This Unit accepts only signals in compliance with EIA861.
For HDMI-DVI Connection
●
●
The Unit accepts 480i, 480p, 720p, 1080i and 1080p Video signals.
●
HDMI-DVI Connection requires separate Audio Connections as well and the Audio signals
are Output as Analog (L/R) Audio.
●
DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.
●
With this Unit, yellow cable must be connected to Y (green) jack on the Component
Video Input jacks.
●
Whenever you connect to the Composite Video Input jack (Y/VIDEO), you must
disconnect the Component Video Input jacks (Pb and Pr). If you leave those jacks
connected, it may cause of an unstable picture.
Digital Audio Output Connection
If you connect this Unit to an External Digital Audio Device, you can enjoy
multi-channel Audio like 5.1ch Digital Broadcasting sound.
Use a Digital Audio Coaxial Cable to connect the Unit to External Digital
Audio Devices.
IN
OUT
Digital Audio coaxial cable
Digital home theater
amplifier
Continued on next page.
14 .English
PC Connection
Note(s)
HDMI Connection
This Unit can be connected to your PC that has an HDMI terminal.
Use an HDMI cable for this Digital Connection.
●
Please purchase the VGA cable or HDMI-DVI Conversion Cable that has a ferrite core.
●
The following operations may reduce noise.
●
OUT
IN
HDMI cable
PC
HDMI-DVI Connection
This Unit can be connected to your PC that has a DVI Terminal.
Use an HDMI-DVI Conversion Cable for this Video Digital Connection
and it requires Stereo mini 3.5mm Plug Audio Cable for Analog Audio
signal as well.
IN
IN
–
Attach a ferrite core to the AC Power Cord of your PC.
–
Unplug the AC Power Cord and use the built-in battery of your Portable / Laptop PC.
Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI cable
is recommended for the Better compatibility.
●
The Unit accepts 480i, 480p, 720p, 1080i and 1080p Video signals.
●
HDMI-DVI Connection requires separate Audio Connections as well and the Audio signals
are Output as Analog (L/R) Audio.
●
DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.
USB Memory Stick
This unit offers easy Playback of Picture (JPEG) and Video (Motion JPEG)
files.
Insert the USB Memory Stick into the USB terminal shown below.
USB L p. 32
Stereo mini 3.5 mm plug
OUT
Audio cable
HDMI-DVI
conversion cable
OUT
PC
Note(s)
●
The Unit recognizes only a USB Memory Stick.
VGA Connection
●
Do Not use a USB hub or an extension cable to connect an External hard disk drive to
the Unit. (Not Supported.)
This unit is equipped with a PC Input jack. If you connect this Unit to your
PC, you can use this Unit as a PC monitor.
Use a VGA cable for this Video Connection and it requires a Stereo mini
3.5mm Plug Audio Cable for Analog Audio signal as well.
●
A USB Memory Stick is always inserted to this Unit directly.
●
A USB Memory Stick is Not Supplied with this Unit.
Stereo mini 3.5 mm plug
IN
Audio cable
VGA cable
IN
OUT
OUT
●
We Do Not guarantee that All USB Memory Sticks can be supported by this Unit.
●
Be sure to keep a backup copy of the original files on your Device before you play them
back on this Unit. We have no responsibilities for damage or loss of your stored data.
●
To protect your USB Memory Stick files from being erased place the write protect sliding
tab in the protect position.
●
When you are ready to remove a USB Memory Stick, set the Unit to go into Standby
mode to avoid any damage to your data and the Unit.
●
A USB Memory Stick that requires its own driver or the Device with a special system such
as fingerprint recognition are Not Supported.
●
This unit is not allowed to use the USB Memory Stick which requires an External Power
Supply (500mA or more).
PC
The following Video signals can be displayed:
Format
Resolution
Refresh rate
VGA
SVGA
XGA
640 x 480
800 x 600
1,024 x 768
1,280 x 768
1,360 x 768
60Hz
WXGA
Other formats or non-standard signals will not be displayed correctly.
Continued on next page.
15 .English
These Operations are accessible by Remote Control.
Some may also be accessible by the Main Unit's Control Panel.
4
Initial Setup
Use H I to select the desired Location setting, then press OK.
Home is the ENERGY STARN qualified setting.
Initial setup
Retail
This section will guide you through the Unit’s Initial setting which includes
selecting a Language for your On-screen Menu and Autoprogram, which
Automatically scans and memorizes viewable channels.
Before you begin:
Location Home is recommended for normal home use
and is ENERGY STAR qualified.
In the Retail store mode, all settings are fixed.
Home
Make sure the Unit is connected to an Antenna or Cable.
1
After making All the Necessary Connections, press B to Turn On
the Unit.
●
It may take a few moments to Turn On the Unit for the first time.
Select
Initial setup menu appears Automatically after the Unit is Turned
On.
Use H I to select the On-screen language from the choices
(English / Español / Français) on the right side of the TV screen, then
press OK.
●
2
3
●
Use H I to select Antenna for TV channels or Cable for CATV
channels, then press OK.
Antenna
Cable
Antenna
Cable
Skip
5
Or
ANTENNA IN
Select Home, the Unit is set to maximize the energy efficiency for
home setting and it can be adjusted through a choice of Picture
and Sound quality according to your preference. Use this setting
to remove the E-sticker, if visible on the display. L p. 31
You must set Home in step 4. Otherwise, Picture and Sound
settings you adjusted will not be memorized after the Unit goes
into Standby mode.
● When the Initial setup is completed, the Lowest Memorized
Channel with the confirmation message of the Location setting will
be displayed on the TV screen.
● Select Retail, the Unit will be set up with predefined settings for
retail displays. In this setting, the Power Consumption may possibly
exceed the limited requirement limit of the ENERGY STARN
qualification.
When you select Home, press OK to begin Settings assistant.
●
Initial setup
Make sure the antenna is connected to "ANTENNA IN"
jack.
Select your signal source.
OK
Settings assistant
Select
OK
Back
Settings assistant helps you customize picture settings.
You will see a series of test pictures where the right side
and left side differ. Select the side that is most pleasing to
you with the Left/ Right keys.
The energy consumption in the “Standard” setting is Energy
Star qualified.
Skip
When Antenna is selected, the TV detects Antenna signals. It
searches for DTV and Analog TV channels available in your area.
– When Cable is selected, the TV detects signals supplied by
Cable. It searches for DTV, Analog TV and Cable channels
available in your area.
Autoprogram will begin.
–
●
Initial setup
Please wait while the system is scanning for channels.
Auto programming may take more than 20 minutes to
complete.
Next
6
Back
Exit
Press J or K 3 times to select the side of the pictures that is the
most pleasing to you, then press OK.
Right side
Left side
0%
Digital channels
0 ch
Analog channels
0 ch
Skip
1/3 Select the picture setting that you prefer.
Select
Next
Back
Exit
16 .English
7
Press OK to finish Settings assistant.
Settings assistant
You have set up your viewing preferences.
Store
●
●
Back
Exit
When the initial setup is completed, the lowest memorized
channel with the confirmation message of the location setting will
be displayed on the TV screen.
You must set Home in step 4. Otherwise, Picture and Sound
settings you adjusted will not be memorized after the unit goes
into Standby mode.
Note(s)
●
If you are not receiving a signal from your Cable service, contact the Cable provider.
●
If you press B or Q during Autoprogram, this Setup of TV channels will be Cancelled.
●
●
The Initial Autoprogram function can be executed for either Antenna or Cable only Once.
When you change the Connection (Antenna / Cable), select Autoprogram again.
L p. 24
If there is no signal Input from the Antenna terminal and no operation for several seconds
after you Turn On the Unit, Helpful hints appears. Follow the instructions listed on the
TV screen.
Initial setup
No channel is registered.
Try Autoprogram again?
Verify that you have a cable connected to the
ANTENNA IN jack on the back of the TV, the channel
installation process searches this connection.
If you are using a cable or satellite box, please confirm
the input which you have connected to the box and
press "SOURCE" key on the remote control to select
the appropriate source input.
Select
OK
Retry
Later
Skip
After an Initial Setup is completed...
●
●
●
●
●
If you want to scan the channels Automatically again.
Autoprogram L p. 24
You can add the desired Cable and Analog channels not memorized by
Autoprogram.
Add channels L p. 25
If you want to change to another Language.
Language L p. 31
If you want to change the Location setting.
Location L p. 31
If you want to restore the picture setting.
Settings assistant L p. 22
4 Use your TV
17 .English
Switching Channels
Switching on your TV and putting it in Standby
mode
TV
Remote Control
TV
Remote Control
To Turn the TV On from Standby or Off to Standby
Press B on the Side or Front panel or the Remote Control.
●
Note(s)
●
Energy Consumption contributes to air and water pollution. When the AC Power Cord
is plugged in, your TV consumes energy with a very low standby Power Consumption.
To select Channels by using CHI / H or CH + / –
Adjusting Volume
Press CH I (Down) / H (Up) on the Front panel or press CH + / –
on the Remote Control or the Side panel.
●
To select Channels by using the NUMBER keys
Digital TV Operation
TV
For Digital channels, press a number followed by a dot “•” and the
corresponding sub channel number.
●
–
Remote Control
When selecting Digital channel 11.1
Be sure to press • before entering the subchannel number.
Cable / NTSC (Analog) TV Operation
–
To decrease or increase Volume
●
Press VOL J / K on the Front panel or press VOL + / – on the Remote
Control or the Side panel.
VOL J(-) : Volume Down
VOL K(+) : Volume Up
Press PREV.CH to return to the previously viewed channel.
To mute or unmute sound
●
Press V on the Remote Control to mute the sound.
●
Press V again or VOL + / – to recover the original sound.
When selecting Cable or Analog channel 11
Note(s)
●
To select the non-memorized channels, use the NUMBER keys.
●
No signal will appear on the TV screen after the subchannel broadcast is over.
●
Audio only program message will appear on the TV screen, when you receive only a
sound signal.
18 .English
Watching Channels from an External Device
Switching Each Input Mode can easily switch with the Remote Control
between TV (DTV or Analog TV) and External Devices when they are
connected to the Unit.
1
Turn On a Set-top Box or the Connected Device.
The picture from the Set-top Box or the Connected Device might
appear Automatically on the TV screen.
If the picture does not appear
Sleep Timer
Sleep Timer can set the Unit to go into Standby mode after an incremental
period of time.
●
Press SLEEP Repeatedly to change the amount of time
(increases the time by 30 minutes up to 120 minutes).
Sleep timer 120 min.
Press SLEEP Once to call up the display for checking the remaining time.
To cancel Sleep Timer, press SLEEP Repeatedly until Off is displayed.
●
① Press S SOURCE Repeatedly to select the Set-top Box or the
Connected Device and wait a few seconds till the Picture appears.
●
Pressing H reverses the direction of the Input modes.
Switching Audio Mode
e.g.)
Digital TV Operation
11.1
Source
TV
HDMI1
HDMI2
Video
PC
HDMI1
HDMI2
DTV / Analog TV
channel
PC
1
2
Video
or
Component
② Use the Remote Control for the Set-top Box or the Connected
Device to select Channels to view.
Press SAP to display the currently selected Language
and the number of available Languages.
Press SAP Repeatedly to cycle through the available
Audio Languages.
11.1
English 1/3
Note(s)
●
●
Available Languages differ depending on the Broadcast.
Other is displayed when the Audio Language cannot be acquired or the acquired
Languages are other than English, French or Spanish.
Cable / NTSC (Analog) TV Operation
1
2
Press SAP to display the currently selected Audio mode.
While receiving an MTS broadcast, press SAP Repeatedly
to cycle through the available Audio Channels.
11
SAP / STEREO
e.g.) When All Audio Modes are available
SAP / STEREO
STEREO
SAP
MONO
SAP / MONO
SAP / STEREO
: Outputs Stereo Audio
: Outputs a Second Audio Program
: Outputs Mono Audio
Continued on next page.
19 .English
Normal
EasyLink options
4:3
If you have our brand products such as Blu-ray Disc player or DVD
recorder that are compatible with EasyLink functions, connect them to
this Unit via an HDMI cable so you can simply operate various items from
this Unit’s Remote Control.
Before you begin:
Movie expand
You must set On in Device control and EasyLink control. L p. 30
Otherwise, LINK does not work even if you connected our brand devices
to this unit.
Wide
1
Press U OPTIONS to display EasyLink options menu.
EasyLink options
Zoom
Original size.
Shortened horizontally.
Sidebars appear on both edges of the screen.
Vertically stretched to fill the screen.
This only crops out the top of the picture.
Maximum size without changing its horizontal and
vertical ratio.
Horizontally stretched picture.
This crops out the left and right sides of the picture.
For 4:3 Video signal
Device-menu
Device-contents
Device-favorite
Device-menu
Controls the menu of your connected EasyLink
device.
Device-contents
Controls the top menu of your DVD or Blu-ray
Discs.
Device-favorite
Controls the pop-up menu of your Blu-ray Discs.
2
Use H I or OK on this Unit’s Remote Control to operate the
desired functions for your devices.
Normal
Full
(HDMI Device only)
Normal
Note(s)
●
●
●
16:9
Some of EasyLink functions may not be available depending on your EasyLink devices or
Discs.
You must connect this Unit to our brand EasyLink devices and be sure its EasyLink setting
is also set to On.
We do Not guarantee 100% interoperability with other brands of HDMI link compliant
devices.
Movie expand
Zoom
Changing Picture Format
Wide
Display Modes can be Selected when your TV receives a 16:9 or 4:3 Video
Signal.
Three types of Display Modes can be Selected for a PC Input Signal.
Press FORMAT Repeatedly to Switch the TV Aspect Ratio.
●
●
Normal
4:3
Zoom
Wide
Original size.
Sidebars appear on both edges of the screen.
Stretched horizontally to fill the screen.
Stretched more vertically at the top of the screen.
This crops out the top of the picture.
Maximum size that is more vertically stretched to fill
the screen.
This crops out the top and bottom of the picture.
Original size and the edges stretched horizontally to
fill the screen.
Full
Unscaled
This Unit can also be connected to your PC that has a DVI Terminal.
Use an HDMI-DVI Conversion Cable for this Video Connection and it
requires a Stereo Mini 3.5mm Plug Audio Cable for Analog Audio signal
as well.
Refer to 16:9 Video Signal on this page if the PC has an HDMI Output.
Full
Unscaled
Normal
Movie expand
For PC Input signal
Normal
For 16:9 Video signal
16:9
Full can also be selected
after Wide if an HDMI
Device is selected. This
picture format similarly
displays like 16:9.
Proportionately stretched picture.
Sidebars appear on both edges of the screen.
Stretched out of proportion to fill the screen.
Original size.
Movie expand
Full can also be selected
after Wide if an HDMI
Device is selected. This
picture format similarly
displays like Normal.
Full
(HDMI Device only)
Wide
Zoom
Continued on next page.
20 .English
TV Screen information
You can display the currently selected channel or other information such
as the aspect ratio on the TV screen.
In the Digital mode, the detailed broadcasting information for the current
off the air channel, such as Program title, are displayed.
1
Press T INFO.
Digital TV Operation
a
b
A Day of Memories
Rating information:
US TV : TV-MA
US TV : TV-14
US TV : TV-PC
US TV : TV-G
c
KABC
US movie : X
US movie : NC-17
US movie : R
US movie : PG-13
11.1
English 1/2
1080i
HD
16:9
Rating
CC
d
e
f
g
a Program title
b Broadcast station
Cable / NTSC (Analog) TV Operation
c
11
SAP / STEREO
480i
SD
TV-PG DLSV
4:3
CC
d
e
f
g
c Channel Number
Switching channels L p. 17
d Audio Language (DTV) / Audio mode (Analog TV)
Switching Audio Mode L p. 18
e Program’s image Aspect Ratio
Changing Picture Format L p. 19
f CC (Not available if Closed Caption is set to Off)
Caption settings L p. 25
g Child Lock rating
Child and Ratings Lock L p. 27
2
Press T INFO to hide the information.
Note(s)
●
●
●
●
When the program guide consists of more than 4 lines, use H I to scroll to the next /
previous lines.
No description provided. is displayed when the program guide is not provided.
While the TV screen information is displayed, the Closed Caption function is interrupted.
In External Input mode, the following screen is displayed;
e.g.) When an External Device is connected to Video Input jack.
Video
480i
SD
TV-PG DLSV
●
The information display will Automatically disappear in 5 seconds.
4:3
CC
5 Making more use with your TV
21 .English
2
This section describes the overview of the Main Menu displayed when
you press Q.
The Main Menu consists of the function setting items below.
Use H I to select the desired Menu and an item, then press OK or
use H I J K to determine the setting.
Picture
L p. 22
Adjusting the Picture Mode or customize the Picture quality as
your preference.
Displaying the Main Menu
1 Press Q to display the Main Menu.
Sound
L p. 23
Adjusting the Sound Mode, Equalizer and some other Sound
functions.
Picture
Sound
Setup
Features
Language
USB
Settings assistant
Auto picture
Backlight
Contrast
Brightness
Color
Tint
Sharpness
Advanced settings
Setup
Personal
18
50
30
30
0
2
L p. 24
Scanning the Channels available in your area and see what the
Antenna Signal levels are.
Features
L p. 25
Adjusting the Closed Caption, Parental Guide and some other
useful functions.
Language
L p. 31
You can choose English, Spanish or French as your On-screen
Language.
USB
L p. 32
You can view Picture (JPEG) and Video (Motion JPEG) files
stored on a USB Memory Stick.
3
When the Setting is completed, press Q or BACK to Exit.
22 .English
Picture
●
Before you begin:
Picture
Sound
Setup
Features
Language
USB
You must set Home in Location. L p. 31
Otherwise, personalized Picture and Sound settings will not be
memorized after the Unit goes into Standby Mode.
1
Press Q and use H I to select Picture, then press OK.
Picture
Sound
Setup
Features
Language
USB
2
Settings assistant
Auto picture
Backlight
Contrast
Brightness
Color
Tint
Sharpness
Advanced settings
You can set a Particular Picture Quality using Advanced
settings.
Auto picture
18
50
30
30
0
2
Backlight
Contrast
Brightness
Color
Tint
Sharpness
Advanced settings
On
Gamma2
to set the picture color temperature to
Color
Personal (Cool, Normal or Warm)
temperature When you adjust the following
mode
settings, Personal picture will be set
Automatically.
J Cursor
to guide you through the best picture setting
to select the desired setting, then press OK.
(Personal, Standard, Vivid, Sports, Movie, Game
and Eco)
When you adjust the following settings, Personal
picture will be set Automatically.
J Cursor
Noise reduction
Black stretch
Dynamic contrast
Gamma
Normal
On
On
Personal
Use H I J K to select the item you want to adjust, then press
OK.
Settings assistant
Color alignment
Color
alignment
Cursor K
to Reduce Power
Consumption and
Reduce Backlight
Brightness
to Increase Power
Consumption and
Brightness
to Decrease Contrast
to Increase Contrast
to Decrease Brightness to Increase Brightness
to Decrease Color
Intensity
to Increase Color
Intensity
to Add Red
to Add Green
to Soften
to Sharpen
to Select the desired Setting, then press OK.
(Color alignment, Noise reduction, Black
stretch, Dynamic contrast and Gamma)
Noise
reduction
Black stretch
Dynamic
contrast
Red gain
to Decrease Red
Contrast
to Increase Red
Contrast
Green gain
to Decrease
Green Contrast
to Increase Green
Contrast
Blue gain
to Decrease Blue
Contrast
to Increase Blue
Contrast
Red offset
to Decrease Red
Brightness
to Increase Red
Brightness
Green
offset
to Decrease
Green Brightness
to Increase Green
Brightness
Blue offset
to Decrease Blue
Brightness
to Increase Blue
Brightness
Off
to Set Noise reduction to Off
On
to Reduce Noise in an Image
Off
to Set Black stretch to Off
On
to Enhance Black Color
Off
to Set Dynamic contrast to Off
On
to Enhance Contrast in an Image
Automatically
Gamma1
Gamma
Cursor K
Gamma2
Gamma3
to Change the Gamma setting
(changes the Brightness and Contrast
in the picture)
23 .English
You can select Audio Output through a Digital Audio Output connector.
Sound
Digital output
format
Before you begin:
You must set Home in Location. L p. 31
Otherwise, personalized Picture and Sound settings will not be
memorized after the Unit goes into Standby Mode.
1
Press Q and use H I to select Sound, then press OK.
Picture
Sound
Setup
Features
Language
USB
2
Auto sound
Equalizer
DTS TruSurround
Auto volume leveling
TV speakers
Digital output format
Audio setting
to select the desired setting, then press OK.
(Personal, Standard, Vivid, Sports, Movie, Music
and News)
When you adjust the following settings
(Equalizer, DTS TruSurround and Auto volume
leveling), Personal sound will be set
Automatically.
Adjust the tonal quality for each frequency.
Cursor I
Equalizer
Cursor H
to adjust each level of tonal quality.
Press BACK to go back to the previous menu.
This selects Sound Modes for more spatial or Surround Sound
reproduction.
DTS TruSurround
Off
to set DTS TruSurround™ to Off
On
to set DTS TruSurround™ to On
This function keeps a constant loudness level between the TV
commercials and the Programs.
Auto volume
leveling
Off
to Remove the Auto volume leveling
On
to Reduce Volume Differences
between the TV Commercials and the
Programs
You can select the Audio Output from the Unit’s speakers or not. If your
amplifier is HDMI link function compatible and connected by an HDMI
cable to this Unit, some sound operations such as volume up can be
changed by using this Unit’s Remote Control.
On
to Output Sound from the Unit’s
Speakers
Off
not to Output Sound from the
Unit’s Speakers
TV speakers
Speakers
EasyLink
to Control Audio Output from
your connected EasyLink
Compliant Devices with VOL + /
– by using this Unit's Remote
Control.
to Output Audio in its native
format as Bitstream to connected
Audio receiver.
to Output PCM format.
You can set the Output mode as a default for the Sound mode (Analog
TV only).
This setting is not interlocked when you change the Output mode by
pressing SAP. Refer to Switching Audio Mode. L p. 18
Audio setting
Use H I J K to select the item you want to adjust, then press
OK.
Auto sound
PCM
Standard
Off
Off
On
Bitstream
Stereo
Bitstream
Stereo
to Output Stereo Audio
Mono
to Output Mono Audio
SAP
to Output Second Audio Program
24 .English
Setup
Autoprogram
Before you begin:
Please wait while the system is scanning for
channels.
Auto programming may take more than 20 minutes
to complete.
75%
Make sure the Unit is connected to Antenna or Cable.
1
Press Q and use H I to select Setup, then press OK.
Picture
Sound
Setup
Features
Language
USB
Autoprogram
Channel list
Add channels
Antenna
Digital channels
10 ch
Analog channels
6 ch
Exit
When the Scanning and Memorizing of Available Channels is
Completed, the Lowest Memorized Channel will be Displayed.
●
Note(s)
2
Adjust the following items.
Autoprogram
Be sure the RF cable is correctly connected to this Unit and you are
registered with your Cable TV provider when you Install Cable channels.
1
Use H I to Select Autoprogram, then press OK.
2
If you run Autoprogram when you have Locked Channels, a
Message appears asking to enter your PIN. Enter your PIN in order
to Complete the Installation. You need to reset or set the Channel
Lock again after the Installation.
Use H I to Select an appropriate Option, then press OK.
●
–
–
When Antenna is selected, the TV Detects Any Off-the-Air
Antenna Signals. It searches for ATSC (Digital) and NTSC
(Analog) Channels available in your Area.
●
After setting Autoprogram, using CH + / – skips unavailable channels Automatically.
●
If you are not receiving a signal from your Cable service, contact the Cable provider.
●
If you press B or Q during Autoprogram, the Setup of TV channels will be Cancelled.
●
Even if Autoprogram is completed, the channel setting will be lost if the AC Power Cord
is unplugged before the Unit goes into Standby mode by pressing B.
●
The PIN Code will be required Once you set a PIN code in the Child and Ratings Lock.
L p. 27
●
If you want to change your PIN code, follow the instruction for Change PIN. L
p. 29
Channel list
The channels selected here can be skipped when selecting the channels
using CH + / –.
Those channels can still be selected with the NUMBER keys.
1
2
When Cable is selected, the TV detects signals supplied by
Cable. It searches for DTV, Analog TV and Cable channels
available in your area.
Picture
Sound
Setup
Features
Language
USB
Auto program will rescan all channels.
Auto programming may take more
than 20 minutes to complete.
Use H I to select Channel list, then press OK.
Use H I to select the channel you want to remove, then press
OK.
Picture
Sound
Setup
Features
Language
Back
Antenna
Cable
Highlight channels for Ch Up/Down
key selection.
DTV
DTV
DTV
11.1
11.2
11.3
USB
Select your signal source.
Antenna
Ch Select
Cable
Watch / Skip
Back
Or
ANTENNA IN
●
●
●
The channel display for the removed channel darkens. You will not
be able to select the channel again using CH + / –.
To reactivate a removed channel, use H I and press OK. The
registered channels are highlighted.
When you remove a main channel, its subchannels are removed
as well.
Note(s)
●
The channel with DTV indicated on the display is ATSC. Otherwise the channel is Analog
TV (NTSC).
Continued on next page.
25 .English
Add channels
Features
This function lets you add the off the air Analog TV or Analog Cable
channels that were not added by the Autoprogram due to reception
conditions during the Initial Setting.
1
1
2
Use H I to select Add channels, then press OK.
Picture
Sound
Setup
Features
Language
USB
Use the NUMBER keys to enter the number of the channel you
want to add, then press OK.
Picture
Sound
Setup
Features
Language
USB
Add channels
For analog channels, select a channel
to be added using number keys.
For digital channels, Autoprogram
function is required.
2
Back
Ch Change
Note(s)
●
If Setup completes successfully, Added to the channel list. is displayed.
●
If External Input is used, it is not possible to register the channel and Unavailable will be
displayed on the TV screen.
●
Some channels cannot be selected by CH + / –. Use the NUMBER keys to select the
non-memorized channels.
Display Setup using Home Menu and use H I to select Features,
then press OK.
Caption settings
Child lock
PC settings
EasyLink
Location
E-sticker
Software upgrade
Home
--
Adjust the following items.
Caption settings
Closed Captions displays the Audio portion of the Program as
Superimposed Text over the Video.
1
Use H I to Select Caption settings, then press OK.
Picture
Sound
Setup
Features
Language
Antenna Confirmation
Digital TV Operation
Closed captions
Caption service
Digital caption service
Caption style
Off
CC-1
CS-1
USB
This function lets you check the Digital signal strength of each channel.
1
2
Use H I to select Antenna, then press OK.
Use the NUMBER keys or CH + / – to select the channel for which
you want to check the Digital signal strength.
Picture
Sound
Setup
Features
Language
USB
Back
Current
2
Use H I J K to select the Feature you want to use, then press
OK.
You can choose the Closed Caption display.
Off
Closed Caption is not displayed.
Closed captions
Max
On
CC w/
mute
Closed Caption is always
displayed.
Closed Caption is displayed when
the Sound is Off.
Note(s)
Ch Change
●
You can cycle through the Closed Caption settings by pressing CC.
Digital TV Operation
Note(s)
●
If the channel is set to an Analog channel or External Input, you cannot confirm the Antenna
condition.
In addition to the basic Closed Caption, DTV has its own Closed Caption
called Digital caption service. Use this menu to change the settings for
Digital caption service.
Digital caption
service
CS-1 to
CS-6
Select one of these before
changing any other item in
Caption settings menu. Choose
CS-1 under normal conditions.
Continued on next page.
26 .English
Cable / NTSC (Analog) TV Operation
Caption service
CC-1 and
T-1
The primary Closed Captions and
Text Services. The Closed
Captions or Text is Displayed in
the same Language as the
Program’s Dialog (up to 4 lines of
script on the TV Screen).
CC-3 and
T-3
Serve as the preferred Data
Channels. The Closed Captions or
Text is often a Secondary
Language.
CC-2,
CC-4, T-2
and T-4
●
Rarely available and Broadcasters
use them only in Special
conditions, such as when CC-1
and CC-3 or T-1 and T-3 are Not
available.
There are 3 Display modes according to Programs:
Paint-on
Displays Characters on the TV screen
immediately.
Pop-on
Once Characters are Stored in Memory, they are
Displayed All at Once.
Displays the Characters Continuously by
Scrolling (max. 4 lines).
Roll-up
You can choose the Font (Size, Color, etc), Background and other
Characteristics of the Closed Captions Text.
Font style Closed Captioning
font style, size,
Font size
color and
Font
Font color
transparency
Font
(opacity) can be
opacity
changed.
Background Background color
color
Caption style
and transparency
Background
(opacity) of the
Background
displayed caption
opacity
can be switched.
Edge color Edge color and
type of the
Edge
Edge type displayed caption
can be switched.
Note(s)
●
Closed Caption will NOT be displayed when you are using an HDMI Connection.
●
Digital caption service that you can switch differs depending on the broadcast description.
●
Caption style will not have any effect if the User setting is set to Off.
●
The captions do not always use correct spelling and grammar.
●
Not all TV Programs and product commercials include Closed Caption information or All
types of the Closed Captioning. Refer to your area TV Program listings for the TV channels
and times of Closed Caption shows. The captioned programs are usually noted in the TV
listings with abbreviations such as CC.
●
To show the Closed Caption on your TV screen, Broadcast signal must contain the Closed
Caption data.
●
Captions and texts may not exactly match the TV voice.
●
Changing channels may delay the Closed Caption for a few seconds.
●
Adjusting or muting the volume may delay the Closed Caption for a few seconds.
●
Abbreviations, symbols and other grammatical shortcuts may be used in order to keep
pace with the on-screen action. This is not a malfunction.
●
The caption or text characters will not be displayed while the main menu or functions
display is shown.
●
If a black box appears on the TV screen, this means that the Closed Caption is set to the
text mode. To clear the box, select CC-1, CC-2, CC-3, or CC-4.
●
If the Unit receives poor quality television signals, the captions may contain Errors or there
might be no captions at all. Some possible causes of poor quality signals are:
–
Automobile ignition noise
–
Electric motor noise
–
Weak signal reception
–
Multiplex signal reception (ghosts or screen flutter)
–
Data dropout and Pixelation (for DTV only)
●
The Unit retains the Closed Caption setting if the Power fails.
●
When the Unit receives special effects Playback signal (e.g. Search, Slow and Still) from a
VCR’s Video Output channel (ch3 or ch4), the Unit may not display the correct caption
or text.
●
The EUT setting that satisfies § 79.102 (e) is as follows:
–
Font: Mono-font
–
Character Size: Large
Picture display
S o, yo u m u s t b e P
Ph
h il
i l i p. H i !
I ’m p l e a s e d to m e
ee
e t yo u.
Font
(Font style, Font size, Font color and Font opacity)
Edge
(Edge color and Edge type)
Background
(Background color and Background opacity)
●
Review your setting choice made above by looking in the upper right
corner of the displayed setting box (not All selections show the
differences selected).
Continued on next page.
27 .English
Channel lock
Child and Ratings Lock
You can prevent your children from watching certain Programs or certain
Channels by locking the TV Controls and by using Ratings.
1
Use H I to select Child lock, then press OK.
Picture
Sound
Setup
Features
Language
USB
2
Caption settings
Child lock
PC settings
EasyLink
Location
E-sticker
Software upgrade
Home
--
Particular Channels or External Input modes can be invisible in this
function.
3
4
Use H I to Select Channel lock, then press OK.
Use H I to Select the Particular Channels or External Input, then
press OK Repeatedly to Switch between View and Block.
●
G indicates that the Channel or Input Source is Locked.
●
E indicates that the Channel or Input Source is Not Locked.
Picture
Sound
Setup
Features
Language
USB
HDMI1
HDMI2
Video
PC
40.1
DTV
40.2
DTV
Use the NUMBER keys to enter the 4-digit numbers for your PIN
code.
●
When you have not set up your PIN code, enter 0, 0, 0, 0.
●
When the PIN code is correct, Child lock menu is displayed.
See the following description for setting each item.
Picture
Sound
Setup
Features
Language
USB
Channel lock
US movie ratings lock
US TV ratings lock
Canadian English rating
Canadian French rating
Region ratings lock
Change PIN
Note(s)
●
When you select a rating and set it to G or E, the higher ratings will be Blocked
Automatically. The lower ratings will be available for viewing.
●
When you set the highest rating to E, All ratings turn to E Automatically.
●
To Block any inappropriate programs, set your limits in US movie ratings lock, US TV
ratings lock and Region ratings lock.
●
The Child Lock setting will be retained after a Power failure or after the Power is removed
for longer than 10 seconds (except the PIN code reverts to 0000).
Child and Ratings Lock L p. 27
●
Region ratings lock will be available when the Unit receives a Digital broadcast using the
New rating system.
●
For the United States, the Unit may download the Region Ratings Lock Table, if required.
●
The Canadian rating systems on this Unit are based on CEA-766-A and CRTC policy.
Continued on next page.
28 .English
To set the Sub ratings
Setting US Movie and TV Ratings
US Movie Ratings Lock is the Rating System created by MPAA.
US TV Ratings Lock has Controlled Access to Individual Programs based
on their Age and Content rating.
3
Use H I to Select US movie ratings lock or US TV ratings lock,
then press OK.
4
Use H I to Select the Desired Rating, then press OK Repeatedly
to Switch between View and Block.
●
●
As for TV-Y7, TV-PG, TV-14 or TV-MA, you can further set the Sub
ratings to Block Specific Elements within programs. To set the Sub ratings,
follow the step below.
Use H I J K to select the desired rating, then press OK Repeatedly to
switch between G and E.
Picture
Sound
Setup
Features
Language
USB
For US TV Ratings, you can further set the Sub Ratings to Block
Specific Elements within Programs.
G indicates that the Rating is Locked.
●
F indicates that the Sub Rating is Locked.
●
E indicates that the Rating is Not Locked.
All
(FV)Fantasy Violence
None
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
US movie ratings lock
TV-MA
Picture
Sound
Setup
Features
Language
USB
All
NR
US TV ratings
TV-Y7
PG
(FV)Fantasy Violence
TV-PG
(D)Dialog
(L)Language
(S)Sex
(V)Violence
PG-13
TV-14
R
NC-17
X
TV-MA
US TV ratings lock
(L)Language
(S)Sex
(V)Violence
Note(s)
●
Picture
Sound
Setup
Features
Language
USB
Sub rating
G
Blocked Sub Rating will appear beside the Main Rating category in US TV ratings lock
Menu.
All
●
You cannot Block a Sub Rating if the Main Rating is set to E.
None
●
Changing the Category to G or E automatically changes All its Sub Ratings to the same
(G or E).
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
US Movie
ratings
US TV
ratings
All
NR
Description
All Ratings Locked including No Rating
None
No Rating
–
TV-Y
Appropriate for All Children
–
G
TV-Y7
Appropriate for All Children 7 and Older
TV-G
General Audience
PG
TV-PG
Parental Guidance Suggested
PG-13
–
TV-14
Unsuitable for children under 13
–
R
–
NC-17
–
TV-MA
X
Unsuitable for children under 14
Restricted under 17 Requires
Accompanying Parent or Adult Guardian
No One under 17 Admitted
Mature Audience Only
Continued on next page.
29 .English
Canadian English or Canadian French Ratings
You can select the Rating for Canadian English or Canadian French
broadcasting.
3
Use H I to Select Canadian English rating or Canadian French
rating, then press OK.
4
Use H I to Select the Desired Rating, then press OK Repeatedly
to Switch between View and Block.
●
PC settings
This function lets you adjust the PC screen position, clock and phase
during PC Input.
Use J K to adjust Clock setting to stabilize the PC screen and Phase
setting to improve the clarity of the PC screen.
1
Use H I to select PC settings, then press OK.
G indicates that the Rating is Locked.
E indicates that the Rating is Not Locked.
Canadian
Canadian
Description
English rating French rating
All
Locked All Ratings
E
Exempt Program
C
–
For All Children
C8+
–
For All Children 8 and Older
G
General Audience
8ans+
–
Unsuitable for Ages under 8
PG
–
Parental Guidance Suggested
13ans+
–
Unsuitable for Ages under 13
14+
–
Unsuitable for Ages under 14
16ans+
–
Unsuitable for Ages under 16
18+
18ans+
Adult Audience Only
Picture
Sound
Setup
Features
Language
USB
●
2
0
0
0
0
The horizontal/vertical position, clock and phase of the PC screen
are Automatically adjusted.
Auto adjustment Select if you want to adjust Automatically.
●
J Cursor
Horizontal
position
The V-Chip can Block Non Rated Programs as per “CEA-608-E sec. L.3”. If the Option to
Block NR, None or E Programs are used in US movie ratings lock, US TV ratings lock,
Canadian English rating or Canadian French rating accordingly “unusual results may occur
and the Unit may not Receive Emergency Bulletins or other Types of Programming”: /
Emergency Bulletins (Such as EAS messages, Weather Warnings and Others) / Locally
originated Programming / News / Political / Public Service Announcements / Religious /
Sports / Weather.
Change PIN
Cursor K
to move PC screen left
to move PC screen
right
Vertical position
to move PC screen
down
to move PC screen up
Clock
to decrease setting
value
to increase setting
value
Phase
Note(s)
Although the default PIN code (0000) is supplied with the Unit, you can
set your own PIN code.
3
4
Horizontal position
Vertical position
Clock
Phase
Use H I to select the item you want to adjust, then press OK.
Note(s)
●
Auto adjustment
Use H I to select Change PIN, then press OK.
●
You may not obtain an appropriate screen with Auto adjustment for some signals. In this
case, please adjust the settings manually.
●
Properly adjust the Clock setting and then adjust the Phase setting.
Press the NUMBER keys to enter the New 4-digit PIN code.
●
Enter PIN code again in Confirm PIN. entry field.
Picture
Sound
Setup
Features
Language
USB
Enter PIN.
Confirm PIN.
PIN Code
Back
Note(s)
●
Make sure to enter a PIN code and the confirm PIN code must be exactly the same.
If they are different, the space is cleared to reenter the New PIN code.
●
When a Power failure occurs the PIN code will be erased and Unit returns to the default
PIN code (0000).
●
If you forget the PIN code, unplug the AC Power Cord then wait for 10 seconds to plug
the AC Power Cord in again.
The Unit will restore the PIN code to 0000 (factory default). Then repeat the Change PIN
procedure to Setup a New PIN code.
Continued on next page.
30 .English
EasyLink
Device list
This function allows you to operate the linked functions between our
brand Devices with a EasyLink feature and this Unit connecting through
an HDMI cable. You must connect this Unit to our brand EasyLink devices
and be sure it's EasyLink setting is also set to On.
Use H I to select the desired EasyLink devices listed on the TV screen,
then press OK.
1
Use H I to select EasyLink, then press OK.
Picture
Sound
Setup
Features
Language
USB
Master EasyLink
Auto device off
Auto TV on
Device control
Device list
On
On
On
On
This function lets you see the product model number or name of
Connected Devices.
Your connected EasyLink device will be Turned On if the device is in
Standby mode.
Picture
Sound
Setup
Features
Language
USB
HDMI1
DVD recorder
HDMI2
Blu-ray disc player
Input Change
2
Use H I J K to select the item you want to adjust, then press
OK.
Set the Master EasyLink On or Off. The following additional settings will
be grayed out when you set them to Off.
Master EasyLink
Off
Disables All EasyLink.
On
Selects if you have connected an
External Device that is compatible
with the EasyLink function.
You can set your connected EasyLink device to Turn Off by interlocking
from this Unit’s Power.
Off
Your connected EasyLink device
stays On even if the Unit goes into
Standby mode.
On
Your connected EasyLink device
Turns Off Automatically when the
Unit goes into Standby mode.
Auto device off
This Unit will Turn On when the Power On Signal is sent from your
connected EasyLink device.
Off
This Unit stays in Standby mode
even if you Turn On your
connected EasyLink device.
On
This Unit Turns On Automatically
when you Turn On your
connected EasyLink device.
Auto TV on
You can operate some functions such as Disc Playback or call up the menu
of the connected devices, by using this Unit’s Remote Control.
Off
Disables the device control.
Device control
On
PLAY K / STOP C / FWD D /
REV E / SKIP G / SKIP H /
PAUSE F / LINK / HIJ K /
OK / BACK / the NUMBER
buttons / RED / GREEN / BLUE /
YELLOW can be used to control
your connected fun-Link devices
by this unit’s remote control.
Refresh
Back
31 .English
Setting your Location to Home
Language
You can set the Location of your TV to Home or Retail. Choosing Home
gives you full flexibility to change predefined settings for Picture and
Sound.
1
1
Picture
Use H I to Select Location, then press OK.
Picture
Sound
Setup
Features
Language
USB
Caption settings
Child lock
PC settings
EasyLink
Location
E-sticker
Software upgrade
Press Q and use H I to select Language, then press OK.
Sound
Setup
Features
Language
USB
Select your menu language.
English
Seleccione el idioma para el menú.
Español
Sélectionnez la langue du menu.
Français
Home
--
2
Use H I to select English, Español or Français, then press OK.
Note(s)
2
Use H I to select Home or Retail, then press OK.
Retail
The Unit will be set up with predefined settings
for retail displays. In this setting, the Power
Consumption may possibly exceed the limit
requirement of the ENERGY STARN
qualification.
Home
This setting is ENERGY STARN qualified.
The Unit is set to maximize the energy efficiency
for Home setting and it can be adjusted through
a choice of Picture and Sound quality selections
according to your preference.
Note(s)
●
You must set Home in the Menu. Otherwise, personalized Picture and Sound Settings will
Not Be Memorized after the Unit goes into Standby Mode.
E-sticker
When you set Location to Retail store, E-sticker (Electronic Sticker) is
displayed. E-sticker can be Turned Off using procedure below.
1
2
Use H I to select E-sticker, then press OK.
Use H I to select Off, then press OK.
Off
You can Turn Off E-sticker.
Top
E-sticker is displayed on top of the TV screen.
Bottom
E-sticker is displayed on bottom of the TV screen.
Note(s)
●
If you set Location to Home, E-sticker will not be displayed.
●
If you need the English menu instead of the Spanish or French menu’s, press Q.
Use H I to select Idioma or Langue, then press OK.
Use H I to select English then press OK.
Press Q to Exit the Main menu.
32 .English
USB
Picture (JPEG)
Your TV is fitted with a USB Connection that enables you to view JPEG
photos or watch Motion JPEG files stored on a USB Memory Stick.
1
2
1
Use H I to select the desired file, then press OK.
Picture
Connect the USB Memory Stick to the USB terminal on the side of
your TV.
Go to root folder
Image1.jpg
Image2.jpg
Press Q and use H I to select USB, then press OK.
●
The Highlighted Text will move to Start now, then press OK again.
Picture
Sound
Setup
Features
Language
USB
Image3.jpg
Image4.jpg
Image5.jpg
Start now
Image1.jpg
1024:768
2009/04/02 17:42:06
This menu allows you to enjoy your
pictures and videos via your USB
device.
1
●
●
●
3
Use H I to Select the Picture or Video, then press OK.
These Recorded Files must meet Specifications shown below:
Picture (JPEG) Upper limit 24M pixel
●
Video
(Motion JPEG)
Size
320 x 240 (QVGA)
Frame rate
30fps
Audio type
●
Up to 2GB (FAT16) or 8GB (FAT32) capacity can be supported.
●
Up to 10,000 files or 1,000 folders with 19 hierarchies can be recognized.
●
Up to 255 English characters can be recognized.
●
This unit does Not Support MTP (Media Transfer Protocol).
●
This unit supports FAT16 and FAT32 file systems.
●
If the file is Not Supported, an Error message appears.
●
When the USB Memory Stick is not recognized, try reconnecting it again.
●
We cannot be held responsible if your USB Memory Stick is Not Supported, nor will we
accept any liability for damage or loss of stored data.
●
To protect your USB Memory Stick files from being erased place the write protect sliding
tab in the protect position.
●
Be sure to keep a backup copy of the original files on your device before you play them
back on this Unit.
●
This unit does not recognize USB Memory Stick that requires a special driver.
●
This unit is not allowed to use the USB Memory Stick which requires an External Power
Supply (500mA or more).
●
A file name exceeding 128 characters or contains a dot character is Not Supported on
this TV.
●
Progressive JPEG files are Not Supported.
●
Only a Motion JPEG file with an “.avi” extension is supported. An extension “.mov” is Not
Supported.
●
During Motion JPEG Playback, “Pause”, “Forward” and “Reverse” Do Not Work on this
Unit.
2 Thumbnails 3
Press "OK" key to play/pause.
4
To toggle between List and Thumbnails press the NUMBER 2
key each time.
The unit goes to the Slide show Automatically.
To Pause / Play the Slide show, press OK.
Use the NUMBER keys (1 through 4) to see the file details ( 1 )
or change the following settings ( 2 ~ 4 ).
See the description in table below.
Item
Detail
Press 1 to display file details below.
Name, Album, Date, Size and Next.
Press 1 again to remove file details.
1
More Detail
4
Press 4 or OK to start the Slide show.
While the Slide show is on, the following 2 settings will be displayed.
Start show
2
Transitions
Sampling frequency
LPCM (32 kHz, 44.1 kHz or 48 kHz)
Quantization bit rate (16 bit)
Note(s)
Image1.jpg
Picture
3
Press 2, then use H I to select the transition mode choosing from;
None, Dissolve, Wipe right, Wipe left, Wipe up, Wipe down, Box
in and Box out.
Press 3, then use H I to change the display time choosing from; Short,
Medium and Long.
Slide time
4
Press 4 or OK to stop the Slide show.
While the Slide show is Off, the following 2 settings will be displayed.
Stop show
2
Every press on 2 will turn the picture clockwise by 90 degrees.
Rotate
3
Press 3, then use H I to select the zoom factor (1x, 2x or 4x). Press
OK to set the zoom factor.
Zoom
Video (Motion JPEG)
1
Use H I to select the desired file, then press OK.
Video
Video
MOVIE1.avi
Title:
Director:
Date:
Duration:
Go to root folder
MOVIE1.avi
MOVIE2.avi
MOVIE3.avi
MOVIE4.avi
MOVIE5.avi
1
2
MOVIE1.avi
2009/04/02
00:06:37
3
4
Supported format: motion jpeg, 320 x 240, 30FPS
●
●
To stop Playback and return to the file list, press BACK, OK or
CH +.
Press CH - to play back from the beginning.
Item
1
More Detail
Detail
Press 1 to display file details below.
Title:, Director:, Date: and Duration:.
Press 1 again to remove file details.
6 Upgrade your TV Software
33 .English
Downloading the Software
Find information and Software related to your TV and Download the
Latest Software Upgrade file to your PC.
Philips continuously tries to improve its products and we strongly
recommend that you Upgrade the TV Software when Upgrades are
available.
New Software can be Downloaded from our website at
www.philips.com/support
using the model number of your TV to find information.
Checking your Current Software version
1 Press Q and use H I to select Features, then press OK.
2 Use H I to select Software upgrade, then press OK.
1
2
3
4
On your PC, open a web browser and go to
www.philips.com/support
Enter the model number in the “Type the Model Number...” field.
Click the desired Software to be Downloaded.
Decompress the ZIP-file.
Copy the Upgrade file to the Empty root directory on the clean
formatted USB Memory Stick.
●
Starting the Software Upgrade
Warning
Picture
Sound
Setup
Features
Language
USB
3
Current software info
Upgrade
●
When the Software Upgrade is running, don’t press any keys.
●
Do Not remove the USB Memory Stick during the Software Upgrade.
●
If an Error occurs during the Upgrade, retry the procedure or for further assistance, please
contact the Call Center.
1
Connect your USB Memory Stick with the Upgrade file to the USB
Service Port on the side of your TV. Use only the Unit's Front Panel
Keys to enter the following Instruction Steps 2 to 6.
Use H I to select Current software info, then press OK.
●
The version and a description of the Current Software is displayed.
Picture
Sound
Setup
Features
Language
USB
Back
Release Version:
XXXXXXX_XX_XX_XXXX_XX
Upgrading the Software
You can Upgrade the Software by using a USB Memory Stick.
2
3
4
5
Press MENU and use H I to select Features, then press OK.
Use H I to select Software upgrade, then press OK.
Use H I to select Upgrade, then press OK.
Read the On-screen instructions and confirm that you want to
continue with the Installation.
Picture
Sound
Setup
Features
Language
USB
Start now
Would you like to upgrade the
software?
Preparing for the Software Upgrade
You require the following equipment :
A PC with web browsing capability.
●
An archive utility that supports the ZIP-format (e.g. WinZip for
Windows or Stuffit for Mac OS).
●
A Blank empty clean formatted USB Memory Stick.
●
Note(s)
●
Only FAT / DOS-formatted portable memory is supported.
●
Use only Software Upgrades that can be found on the Philips website.
6
When the Software Upgrade is completed, press B to set the Unit
into Standby mode, then remove the USB Memory Stick and then
press B again to Turn the Unit back On.
●
The TV starts up with the New Software.
For further assistance, please contact the Call Center.
34 .English
7 Useful tips
FAQ
Question
My Remote Control does
not work.
What should I do?
Answer
●
Check the Antenna or Cable Connection to the Main Unit.
●
Check the Batteries on the Remote Control.
●
Re-insert the Batteries with their Polarities (+/–) as indicated.
●
Check if there is an obstacle between the infrared sensor window and the Remote Control.
●
●
Aim the Remote Control directly at the infrared sensor window on the front of the Unit.
●
Reduce the distance to the Unit.
●
How come the Initial Setup
appears every time I Turn
On this Unit?
Connect the RF Coaxial Cable directly to this Unit and run the Initial Setup.
●
Make sure to complete the Initial Setup before the Unit goes into Standby mode.
Make sure Autoprogram has been completed. L p. 24
●
The selected channel may not be broadcasting.
●
●
●
When I enter a channel
number, why does it change
Automatically?
Why are captions not
displayed Entirely?
Or why are captions
delayed behind the dialog?
How can I set the clock?
My PIN code no longer
works, how can I change the
Child Lock setting?
Autoprogram must be completed when you Set Up the Unit for the First time or Move it to a location where previously
unavailable channels are broadcast.
●
●
How come there is no
image from the Connected
External Devices?
When there is an infrared-equipped device such as PC near this Unit, it may interrupt the Remote Control signal on this
Unit. Move the infrared-equipped device away from this Unit, change the angle of the Device's infrared sensor or Turn
Off the infrared communication function.
●
●
Why can I not watch some
RF signal TV Programs?
Test the IR Signal Output use IR Signal Check. L p. 36
If okay, then possible Infrared Sensor trouble.
●
●
●
●
●
●
When Autoprogram is interrupted and not completed, some channels will not be received. Make sure to complete the
Autoprogram. L p. 24
The selected channel cannot be viewed by the Child and Ratings Lock setting. L p. 27
The Unit requires some kind of Antenna Input. An indoor Antenna (Digital or VHF / UHF), an External Antenna (Digital
or VHF / UHF) or an RF Coaxial Cable from your wall Cable / Satellite Set-top Box needs to be plugged into the Unit.
Check if the correct Input mode is selected by pressing S SOURCE or using CH + / –. Refer to Watching Channels
from an External Device. L p. 18
Check the Antenna, Cable or other Input Connection to the Unit.
When using the Component Video Connection check that the Green (Y), Blue (Pb/Cb) and Red (Pr/Cr) connectors
are connected to their corresponding colored jacks on the Unit.
Many Digital channels have alternate channel numbers. The Unit changes the numbers Automatically to the ones signifying
the Broadcasting Station's channel number. These basic numbers used for the previous Analog Broadcasts. (e.g., Input
Digital ch# 30 Automatically changes to Digital ch# 8.1)
Closed Captions that are delayed a few seconds behind the actual dialog are common for Live broadcasts. Most captioning
production companies can display a dialog to maximum of 220 words per minute. If a dialog exceeds that rate, selective
editing is used to insure that the Closed Captions remain up-to date with the current TV screen dialog.
There is No clock function on this Unit.
If a Power failure occurs for longer than 10 seconds the child lock setting is retained, but the PIN code is reset to the
default code 0000. Refer to Child and Ratings Lock. L p. 27
Continued on next page.
35 .English
Troubleshooting
If the Unit does not perform properly when operated as instructed in this User Manual,
check the following Troubleshooting Tips and All Connections Once before calling for Service.
Power
No Power
● Make sure the AC Power Cord is plugged in.
● Make sure that the AC outlet supplies the proper voltage, plug another
electrical appliance into the AC outlet to ensure that the AC outlet operates
normally.
● If a Power Failure occurs, Unplug the AC Power Cord for 1 minute to allow
the Unit to Reset Itself.
Remote
Control keys do not work.
● Do NOT press more than one key at the same time.
● Ensure that no keys on the Remote Control are depressed and move freely.
Universal Remote Control does not work properly.
● Refer to the user manual of the universal remote control for the Philips code.
Picture
Power is On but No Screen Image.
● Check whether the Connection for the Antenna, Cable or Satellite Set-top
Box is Connected Correctly.
● Check whether All the Cables to the Unit are connected to the correct Output
Jack on your separate Device like Blu-ray Disc / DVD Recorder.
● Make sure that the selected Input mode is connected to the working Input
jack.
● Check if your computer is NOT in Sleep Mode when the Input Mode on this
Unit is in PC mode. Tap any Key on the Computer Keyboard to Wake it up.
No Color
● View other TV channels. The problem might be limited to the broadcasting
station.
●
Adjust Color in Picture settings. L p. 22
Picture Poor
●
Adjust Contrast and Brightness in Picture settings. L p. 22
● For the Best Picture Quality, watch “High Definition” wide screen Programs.
If the HD content is Not available, watch “Standard Definition” Programs
instead.
You see Pixelation on the Screen.
● When the capabilities of the Unit exceed the capabilities of the Digital
Broadcasting, the signal will be increased to match the capabilities of the
Display on the Unit. This may cause Pixelation, Noise or Trash.
Unusual picture appears and the TV does Not Operate.
● Press the Power key first. If it does not solve the problem, then press the keys
on the Remote Control in the order shown below to change the Unit to the
Live Mode.
SLEEP L FORMAT L K L H L I L B
Sound
No sound, distorted sound or incorrect Audio Sound is heard when using the
HDMI-DVI Connections.
● Make sure that the Analog Audio signals from the HDMI-DVI Device are
connected to the Analog Audio (L/R) Input jacks.
Refer to For PC Input signal L p. 19
● When using Component Analog Video, Composite Analog Video or PC VGA
Video make sure that the Analog Audio (L/R) connectors are mounted into
the Audio (L/R) Input jacks.
Sound Intermittent or No Sound.
● Check if the Audio Cable is connected into the Unit correctly.
You Switch to a Different Input and the Volume Changes.
● This Unit will Memorize the Volume Level from the last time you adjusted it.
● If the Volume of the Sound from another Device is Higher or Lower, then the
Loudness will Change.
●
Make sure Auto volume leveling is set to On. L p. 23
Picture & Sound
No Picture or Sound
● Check if the Power is On.
● Check whether All the cables to the Unit are connected to the correct Output
jack of your device like Blu-ray / DVD Recorder.
● View other TV channels. The problem might be limited to the Broadcasting
Station or Weak Signal Strength.
● Unplug the AC Power Cord and wait for about 1 minute, then Plug the AC
Power Cord and turn On the Unit again.
● Check whether the Connection of the Antenna or Cable / Satellite Set-top
Box is connected correctly.
● Make sure that the selected Input mode is connected to the working Input
jack.
● Check if your computer is NOT in sleep mode when the Input mode of this
Unit is in PC mode. Tap any key on the keyboard to wake up your computer.
●
Make sure that the sound is not muted. Press V so that the volume bar and
current volume level will appear on the TV screen.
●
Make sure that the volume is NOT set to 0 or C. If so, use VOL + / – to
adjust to the desired volume.
Adjusted Picture or Sound settings are not effective every time the Unit is
turned On.
●
You must set Home in Location. L p. 31 (Otherwise, the settings you
adjusted will not be memorized after the Unit goes into Standby Mode.)
You see a Distorted Picture or Hear an Unusual Sound. (Analog TV NTSC signal)
● You may be getting interference from electrical appliances, automobiles,
motorcycles or fluorescent lights.
● Try moving the Unit to another Location to see if this is the Cause of the
Problem.
Ghosts, lines or streaks in picture. (Analog TV- NTSC signal)
● Electrical interference from nearby appliances may affect picture quality.
● View other TV channels. The problem might be limited to the broadcasting
station or weak signal strength.
Picture Poor, Sound Intermittent or No Sound
● View other TV channels. The problem might be limited to the broadcasting
station or weak signal strength.
Screen
You Switch to a different Input and the Screen Size changes.
● This Unit will Memorize the Viewing Mode from the last time you used those
Particular Input Modes.
The Display image does not cover the Entire Screen.
● If you are using the Unit as a PC Monitor, make sure that Horizontal
position and Vertical position in PC settings are set correctly.
● If you are watching TV or using the Composite Video, Component Video or
HDMI with 480i Input, press FORMAT Repeatedly to Switch to various Screen
Modes.
Different color marks on the TV screen
● View other TV channels. The problem might be limited to the broadcasting
station, missing data or pixelation due to weak signal strength.
Closed Captions
Closed Captions are displayed as a white box. No Closed Captions are
displayed in the Closed Captions-Supported Program.
● Interference from buildings or weather conditions may cause captioning to be
incomplete if watching Analog TV signals.
● Broadcasting Station may shorten the program to insert advertisements.
● The Closed Captions Decoder cannot read the information of a shortened
program.
Black Box is displayed on the TV Screen.
● The Text mode is selected. For Closed Captions, select CC-1, CC-2, CC-3
or CC-4. L p. 25
Note(s)
●
●
The LCD screen is manufactured to provide many years of useful life.
Occasionally a few non active pixels may appear as a fixed point of blue, green
or red.
This is Not to be considered a Defect in the LCD screen.
Some Functions are not available in Specific Modes, but this is Not a
Malfunction. Read the Description in this Manual for more Details on Correct
Operations.
36 .English
8 Information
Glossary
Analog TV (NTSC)
Acronym that stands for National Television Systems Committee and the
name of Analog broadcasting standards.
Off the air Analog TV signals are no longer being sent by major
broadcasting stations in the USA.
Aspect ratio
The width of a TV screen relative to its height. Conventional TVs are 4:3
(in other words, the TV screen is almost square); widescreen models are
16:9 (the TV screen is almost twice as wide as its height).
CEC (Consumer Electronics Control)
This allows you to operate the linked functions between our brand
devices with CEC feature and this Unit. We Do Not guarantee 100%
interoperability with other brands of CEC compliant devices.
Component Video
This is a Video signal format that conveys each of 3 principal colors of light
(red, blue and green) through different signal lines. This allows the viewers
to experience picture colors as original as it is. There are several signal
formats, including Y / Pb / Pr and Y / Cb / Cr.
Dolby Digital
The system developed by Dolby Laboratories to compress Digital sound.
It offers Stereo Sound (2ch) or multi-channel Audio.
DTS TruSurround™
Enable DTS TruSurround™ to enhance your audio experience.
DTV (ATSC)
Abbreviation that stands for Advanced Television Systems Committee
and the name of the Digital broadcasting standards.
E-sticker
E-sticker is showing set features, technical information, etc on this TV set
that is displayed on the TV screen mainly used by TV retailers. Previously
the information was on a printed sticker that was put on the display.
HDMI (High-Definition Multimedia Interface)
Interface that supports All uncompressed, Digital Audio / Video formats
including Set-top Box, Blu-ray / DVD Recorder or Digital television, over
a single cable.
HDTV (High Definition TV)
Ultimate Digital format that produces high resolution and high picture
quality.
PIN code
A stored 4-digit number that allows access to Parental control features.
SAP (Secondary Audio Program)
Second-Audio channel delivered separately from the Main-Audio channel.
This Audio channel is used as an alternate in bilingual broadcasting.
SDTV (Standard Definition TV)
Standard Digital format that is similar to the Analog TV picture quality.
Maintenance
Cabinet Cleaning
●
●
Wipe the front panel and other exterior surfaces of the Unit with a soft
cloth.
Never use a solvent or alcohol. Do Not spray insecticide liquid near the
Unit. Such chemicals may cause damage and discoloration to the
exposed surfaces.
Panel Cleaning
Wipe the panel of the Unit with a soft cloth. Before cleaning the panel,
disconnect the AC Power Cord.
Servicing
Should your Unit become inoperative, Do Not try to correct the problem
yourself. There are no user serviceable parts inside. Call our toll free
customer support line found on the cover of this User Manual to locate
an Authorized Service Center.
IR Signal Check
If the Remote Control is not working properly, you can use a Digital or
Cell Phone Camera to see if it is sending out an infrared signal.
e.g.) With a Digital Camera:
Point the Digital Camera towards the
Remote Control infrared diode at the front
of the Remote Control. Press any key on the
Remote Control and look at the Camera
Display. If an infrared pulsating light appears
on the Display, the Remote Control is
sending out an IR signal.
Note: Some Cameras have an IR Filter and will not Display the IR signal.
37 .English
9 Specifications
Model #
32PFL3509
Picture
Type
Diagonal Screen Size / Aspect Ratio
Viewing Angles
Built-in Digital / Analog Tuner
Sound
WXGA (1366 x 768 pixels 60Hz)
31.5" / 16:9
178° (V) by 178° (H)
ATSC (Digital) / NTSC (Analog)
Mono / Stereo
Power Output (RMS watts)
Equalizer
Ease of Use
Mono, Stereo, DTS TruSurround™
8Wx2
5 Band
Picture Format
Photo Slide Show
Video Playback
Channel
SD (4:3 Source)
HD (16:9 Source)
HDMI AV (4:3 Source)
HDMI AV (16:9 Source)
PC Source
CATV (Analog NTSC)
Tuning System
Channel Access
Normal / 16:9 / Movie expand / Zoom / Wide
Normal / 4:3 / Movie expand / Zoom / Wide
Normal / 16:9 / Movie expand / Zoom / Wide / Full
Normal / 4:3 / Movie expand / Zoom / Wide / Full
Normal / Full / Unscaled
(Refer to HDMI AV (16:9 Source) above if PC has HDMI Output.)
JPEG files only
Only Motion JPEG 320 x 240, 30 fps with file extension "avi" will Playback.
Terrestrial DTV (ATSC)
Channel Coverage
:
:
:
:
:
Terrestrial Analog (NTSC)
: VHF: 2~13
UHF: 14~69 (Each Channel has e.g. 2.1~2.9, 3.1~3.9, etc)
: VHF: 2~13
UHF: 14~69
2~13, A~W
W+1~W+94 (Analog W+1~W+84), A-5~A-1, 5A
Channel Frequency Synthesized Tuning System
Direct Access Number Keyboard,
Programmable Scan, Channel +(up) / −(down) and PREV. CH (Previous Channel)
Connectivity
Component Video Input
1
(Y/Pb/Pr)
Supporting video signals : 480i/p, 720p, 1080i @60Hz
Composite Video Input
(Shared Y Green Terminal with Component 1
Video)
2
HDMI Input
Supporting video signals : 480i/p, 720p, 1080i @60Hz, 1080p @24/30/60Hz
PC-Input signal up to WXGA (1360 x 768)
Analog Audio L/R Input
1
PC Input
via VGA, HDMI and HDMI-DVI + Analog Audio L/R
USB
1
1
Digital Audio Output
Supporting Dolby Digital
1
Headphone Output
1/8 inch (3.5mm)
Power
●
Power Requirements
Temperature
120V~ +/− 10%, 60Hz +/− 0.5%
Operating Temperature
41 °F (5 °C) to 104 °F (40 °C)
Specifications are Subject to Change without Prior Notice.
38 .English
10 Warranty
PHILIPS LIMITED WARRANTY
ONE (1) YEAR
WARRANTY COVERAGE:
PHILIPS warranty obligation is limited to the terms set forth
below.
WHO IS COVERED:
Philips warrants the product to the original purchaser or the person receiving the product as a gift against defects in materials and
workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
WHAT IS COVERED:
The Philips warranty covers new products if a defect in material
or workmanship occurs and a valid claim is received by Philips
within the Warranty Period. At its option, Philips will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or serviceable used parts and is at least functionally equivalent or most
comparable to the original product in Philips current inventory,
or (3) refund the original purchase price of the product.
Philips warrants replacement products or parts provided under
this warranty against defects in materials and workmanship from
the date of the replacement or repair for ninety (90) days or for
the remaining portion of the original product’s warranty,
whichever provides longer coverage for you. When a product or
part is exchanged, any replacement item becomes your property
and the replaced item becomes Philips’ property. When a refund
is given, your product becomes Philips’ property.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements
can result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND
LIMITATIONS:
This Limited Warranty applies only to the new products manufactured by or for Philips that can be identified by the trademark,
trade name, or logo affixed to it. This Limited Warranty does not
apply to any non-Philips hardware product or any software, even
if packaged or sold with the product. Non-Philips manufacturers,
suppliers, or publishers may provide a separate warranty for their
own products packaged with the bundled product.
Philips is not liable for any damage to or loss of any programs,
data, or other information stored on any media contained within
the product, or any non-Philips product or part not covered by
this warranty. Recovery or reinstallation of programs, data or
other information is not covered under this Limited Warranty.
Philips, or (d) if any Philips serial number has been removed or
defaced, or (e) product, accessories or consumables sold “AS IS”
without warranty of any kind by including refurbished Philips
product sold “AS IS” by some retailers.
This Limited Warranty does not cover:
• Shipping charges to return defective product to Philips.
• Labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.
• Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
screen markings resulting from viewing fixed stationary content for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of Philips.
• Damage or claims for products not being available for use, or
for lost data or lost software.
• Damage from mishandled shipments or transit accidents when
returning product to Philips.
• A product that requires modification or adaptation to enable
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
• Product lost in shipment and no signature verification receipt
can be provided.
• Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE IN THE U.S.A., CANADA,
PUERTO RICO, OR U.S. VIRGIN ISLANDS…
Contact Philips Customer Care Center at:
1-866-309-8147
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT
IS LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY.
Some states do not allow the exclusions or limitation of incidental or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations or exclusions may
not apply to you.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-Philips product, (b)
to damage caused by service performed by anyone other than
Philips or Philips Authorized Service Location, (c) to a product or
a part that has been modified without the written permission of
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
P&F USA, Inc. PO Box 2248, Alpharetta, GA 30023-2248
P&F USA, Inc.
PO Box 2248, Alpharetta, GA 30023-2248 U.S.A.
P&F Mexicana, S.A. de C.V.
Av. La Palma No. 6, Col. San Fernando La Herradura.
Huixquilucan, Edo. de México.
C.P. 52787
A4AF2UT
★★★★★
Philips and Philips Shield are used under license of
Koninklijke Philips N.V.