Philips 32PFL6704D User's Manual

Register your product and get support at
www.philips.com/welcome
52PFL7704D
47PFL7704D
42PFL7704D
32PFL7704D
52PFL6704D
47PFL6704D
42PFL6704D
32PFL6704D
EN User manual
FR Manuel d’utilisation
ES Manual del usuario
EN: For further assistance, call the customer support service in your country.
• To obtain assistance in the U.S.A., Puerto Rico, or the U.S.Virgin Islands, contact Philips
Customer Care Center at 1-866-771-4018
• To obtain assistance in Canada, contact Philips Customer Care Center at:
• 1-800-661-6162 (French speaking)
• 1-866-771-4018 (English speaking)
• To obtain assistance in Mexico, contact Philips Customer Care Center at 01 800 504 6200
Enter below the model and serial numbers located on the back and right side of the TV cabinet.
FR: Pour obtenir de l’aide supplémentaire, communiquez avec le centre de service à la clientèle de
votre pays.
Pour obtenir de l’aide aux États-Unis, à Puerto Rico ou aux Îles Vierges américaines,
communiquez avec le centre de service à la clientèle Philips au : 1-866-771-4018
• Pour obtenir de l’aide au Canada, communiquez avec le centre de service à la clientèle Philips
au :
• 1-800-661-6162 (pour un service en français)
• 1-866-771 4018 (pour un service en anglais)
• Pour obtenir l’aide au Mexique, entrez en contact avec le centre de soin de client de Philips à
01 800 504 6200
Entrer ci dessous le modèle et le numéro de série situés dérrière à droite sur le dos du téléviseur.
•
ES: Para obtener más información, llame al servicio de soporte al cliente de su país.
Para obtener asistencia en los Estados Unidos, Puerto Rico o en las Islas Vírgenes de los
Estados Unidos, comuníquese con Centro de atención al cliente de Philips al 1-866-771-4018
• Para obtener asistencia en Canadá, comuníquese con Philips Customer Care Center al:
• 1-800-661-6162 (en francés)
• 1-866-771-4018 (en inglés)
• Solo para Mexico CENTRO DE ATENCIÓN A CLIENTES LADA. 01 800 504 6200 Solo
Para México.
Escriba a continuación el modelo y número de serie que estan localizados en lado derecho y parte
posterior de el gabinete de el televisor.
•
Model / Modèle / Modelo :
Serial / Série / Serie:
9 Connect devices
1 Notice
4
2 Important
5
5
5
5
Product information
Screen care
Environmental care
3 Your TV
Side controls and indicators
Remote control
4 Get started
Position the TV
Insert the remote control batteries
Connect the antenna or cable
Connect the power cord
Manage cables
Switch on and set up the TV
5 Use your TV
Switch your TV on/off or to standby
Switch channels
Adjust volume
Watch channels from a set-top box
Watch connected devices
Watch a DVD
6 Use more of your TV
Use the quick access menu
Change picture and sound settings
Use Auto Mode
Create and use lists of favorite channels
Set the clock
Use child control and rating locks
View closed captions (subtitles)
View photos, play music, and watch videos on a USB device
Watch videos on a USB device
Use your TV in HD mode
Use your TV as a PC monitor
Use Philips EasyLink
Use the demo mode
7 Install channels
Select your menu language
Set your location to home
Automatically install channels
Optimize the signal quality from your antenna
Uninstall and reinstall channels
Return your settings to default values
Show emergency alerts (EAS)
8 Update your TV software
Check your current software version
Prepare for the software upgrade
Upgrade software
6
6
6
8
8
8
8
9
9
12
28
28
29
29
30
Connection overview
Select your connection quality
Label your connections
Connect your devices
10 Troubleshooting
33
11 Notes for the use of USB devices
34
12 Product information
35
13 Warranty
36
14 Index
37
11
11
11
11
12
12
12
13
13
13
15
15
15
16
19
20
22
22
23
23
24
25
25
25
25
25
26
26
26
27
27
27
27
EN
1
English
Contents
Return your Product Registration Card or register online at
www.philips.com/welcome today to get the very most from your purchase.
Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out.
Complete and return your Product Registration Card at once, or register online at www.philips.com/welcome
to ensure:
*Proof of
Purchase
*Product Safety
Notification
*Additional Benefits
Returning the enclosed card guarantees
that your date of purchase will be on file,
so no additional paperwork will be
required from you to obtain warranty
service.
By registering your product, you'll receive
notification - directly from the manufacturer - in the rare case of a product
recall or safety defect.
Registering your product guarantees that
you'll receive all of the privileges to
which you're entitled, including special
money-saving offers.
Know these
safetysymbols
CAUTION
Congratulations on your purchase,
and welcome to the “family!”
Dear PHILIPS product owner:
Thank you for your confidence in PHILIPS.You’ve selected one of
the best-built, best-backed products available today.We’ll do everything in our power to keep you happy with your purchase for many
years to come.
As a member of the PHILIPS “family,” you’re entitled to protection
by one of the most comprehensive warranties and outstanding
service networks in the industry.What’s more, your purchase guarantees you’ll receive all the information and special offers for which
you qualify, plus easy access to accessories from our convenient
home shopping network.
Most importantly, you can count on our uncompromising commitment to your total satisfaction.
All of this is our way of saying welcome - and thanks for investing
in a PHILIPS product.
P.S. To get the most from your PHILIPS purchase, be
sure to complete and return your Product Registration
Card at once, or register online at:
www.philips.com/welcome
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This “bolt of lightning” indicates uninsulated material within your unit may
cause an electrical shock. For the safety of
everyone in your household, please do not
remove product covering.
The “exclamation point” calls attention to features for which you should
read the enclosed literature closely to prevent operating and maintenance problems.
WARNING: To reduce the risk of fire or
electric shock, this apparatus should not be
exposed to rain or moisture and objects
filled with liquids, such as vases, should not
be placed on this apparatus.
CAUTION: To prevent electric shock,
match wide blade of plug to wide slot, fully
insert.
ATTENTION: Pour éviter les choc électriques, introduire la lame la plus large de la
fiche dans la borne correspondante de la
prise et pousser jusqu’au fond.
For Customer Use
Enter below the model and serial numbers located
on the back and right side of the TV cabinet. Retain
this information for future reference.
Model No.__________________________
Serial No. ________________________
Visit our World Wide Web Site at http://www.philips.com/welcome
2
EN
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any of the ventilation openings. Install in accordance with
the manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and third grounding prong. The wide
blade or third prong are provided for your safety. When the provided
plug does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12.
Use only with a cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen
into apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
15. This product may contain lead or mercury. Disposal of these materials
may be regulated due to environmental considerations. For disposal or
recycling information, please contact your local authorities or the
Electronic Industries Alliance:www.eiae.org.
16. Damage Requiring Service - The appliance should be serviced by
qualified service personnel when:
A. The power supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance; or
English
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a
marked change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
17. Tilt/Stability - All televisions must comply with recommended
international global safety standards for tilt and stability properties of its
cabinets design.
• Do not compromise these design standards by applying excessive pull
force to the front, or top, of the cabinet which could ultimately
overturn the product.
• Also,do not endanger yourself, or children, by placing electronic
equipment/toys on the top of the cabinet. Such items could
unsuspectingly fall from the top of the set and cause product damage
and/or personal injury.
18. Wall or Ceiling Mounting - The appliance should be mounted to a
wall or ceiling only as recommended by the manufacturer.
19. Power Lines - An outdoor antenna should be located away from
power lines.
20. Outdoor Antenna Grounding - If an outside antenna is connected to
the receiver, be sure the antenna system is grounded so as to provide
some protection against voltage surges and built up static charges.
Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper grounding of the mats and
supporting structure grounding of the lead-in wire to an antennadischarge unit, size of grounding connectors, location of antennadischarge unit, connection to grounding electrodes and requirements for
the grounding electrode. See Figure below.
21. Objects and Liquid Entry - Care should be taken so that objects do
not fall and liquids are not spilled into the enclosure through openings.
a) Warning: To reduce the risk of fire or electric shock, this apparatus
should not be exposed to rain or moisture and objects filled with
liquids, such as vases should not be placed on this apparatus.
22. Battery Usage CAUTION - To prevent battery leakage that may
result in bodily injury, property damage, or damage to the unit:
• Install all batteries correctly, with + and - alignment as marked on the
unit.
• Do not mix batteries (old and new or carbon and alkaline, etc.)
• Remove batteries when the unit is not used for a long time.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE (NEC)
GROUND CLAMP
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
ELECTRIC SERVICE EQUIPMENT
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
Note to the CATV system installer: this reminder is provided to call the CATV system installer’s attention to Article 820-40 of
the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as practical.
EN
3
1 Notice
2009 © Koninklijke Philips Electronics N.V. All rights reserved.
Specifications are subject to change without notice. Trademarks are
the property of Koninklijke Philips Electronics N.V. or their respective
owners. Philips reserves the right to change products at any time
without being obliged to adjust earlier supplies accordingly.
The material in this manual is believed adequate for the intended use of
the system. If the product, or its individual modules or procedures, are
used for purposes other than those specified herein, confirmation of
their validity and suitability must be obtained. Philips warrants that the
material itself does not infringe any United States patents. No further
warranty is expressed or implied.
Philips cannot be held responsible neither for any errors in the content
of this document nor for any problems as a result of the content in this
document. Errors reported to Philips will be adapted and published on
the Philips support website as soon as possible.
Cables
Connections to this device must be made with shielded cables with
metallic RFI/EMI connector hoods to maintain compliance with FCC
Rules and Regulations.
Canadian notice
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Copyright
All other registered and unregistered trademarks are the property of
their respective owners.
Pixel characteristics
This LCD product has a high number of color pixels. Although it has
effective pixels of 99.999% or more, black dots or bright points of light
(red, green or blue) may appear constantly on the screen. This is a
structural property of the display (within common industry standards)
and is not a malfunction.
Warranty
No components are user serviceable. Do not open or remove covers
to the inside of the product. Repairs may only be done by Philips
Service Centers and official repair shops. Failure to do so shall void any
warranty, stated or implied.
Any operation expressly prohibited in this manual, any adjustments, or
assembly procedures not recommended or authorized in this manual
shall void the warranty.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio or television
technician for help.
Modifications
The FCC requires the user to be notified that any changes or
modifications made to this device that are not expressly approved by
Philips Consumer Electronics may void the user’s authority to operate
the equipment.
Declaration of Conformity
Trade Name:
PHILIPS
Responsible Party: P&F USA Inc.
Model:
52PFL7704D, 47PFL7704D, 42PFL7704D,
32PFL7704D, 52PFL6704D, 47PFL6704D
42PFL6704D, 32PFL6704D
Address:
PO Box 672768 Marietta, GA 30006 U.S.A.
Telephone Number: 866-771-4018
4
EN
Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories.
VESA, FDMI and the VESA Mounting Compliant logo are trademarks of
the Video Electronics Standards Association.
® Kensington and Micro Saver are registered US trademarks of ACCO
World corporation with issued registrations and pending applications in
other countries throughout the world.
DivX® is a registered trademark of DivX, Inc., and is used under license.
Portions of this software are copyright © The FreeType Project (www.
freetype.org).
Registering your model with Philips makes you eligible for all of the
valuable benefits listed below, so don’t miss out.
Complete and return your Product Registration Card at once, or
register online at www.philips.com/welcome to ensure:
• Proof of Purchase
Returning the enclosed card guarantees that your date of
purchase is on file, so no additional paperwork is required from
you to obtain warranty service.
• Product Safety Notification
By registering your product you receive notification - directly
from the manufacturer - in the rare case of a product recall or
safety defect.
• Additional Benefi ts of Product Ownership
Registering your product guarantees that you receive all of the privileges
to which you’re entitled, including special money-saving offers.
Environmental care
English
2 Important
The packaging of this product is intended to be recycled. Contact your
local authorities for information about how to recycle the packaging.
End of life directives
For further assistance
For further assistance, call the customer support service in your
country.
• To obtain assistance in the U.S.A., Puerto Rico, or the U.S. Virgin
Islands, contact Philips Customer Care Center at 1-866-7714018
• To obtain assistance in Canada, contact Philips Customer Care
Center at:
• 1-800-661-6162 (French speaking)
• 1-866-771-4018 (English speaking)
Product information
This TV consumes minimal energy in standby mode to minimize
environmental impact. The active power consumption is given on the
type plate at the back of the TV. The model and serial number of your
TV can be found on the back and right side of the TV as well as on the
packaging.
Like all LCD products, this set contains a lamp with mercury; please
dispose of according to all local, state and federal laws.
Philips pays a lot of attention to produce environment-friendly products
in green focal areas. Your new TV contains materials which can be
recycled and reused. At the end of its life, specialized companies can
dismantle the discarded TV to concentrate the reusable materials and to
minimize the amount of materials to be disposed of. Please ensure you
dispose of your old TV according to local regulations.
Disposal of used batteries
The batteries supplied do not contain the heavy metals mercury and
cadmium. Nevertheless, in many areas, batteries may not be disposed
of with your household waste. Please ensure you dispose of batteries
according to local regulations.
Screen care
•
•
•
•
•
Avoid stationary images as much as possible. Stationary images
are images that remain on-screen for extended periods of time.
Examples include: on-screen menus, black bars and time displays.
If you must use stationary images, reduce screen contrast and
brightness to avoid screen damage.
Unplug the TV before cleaning.
Clean the TV screen and frame with a soft, damp cloth. Never
use substances such as alcohol, chemicals or household cleaners
on the TV screen.
Risk of damage to the TV screen! Never touch, push, rub or
strike the screen with any object.
To avoid deformations and color fading, wipe off water drops as
soon as possible.
EN
5
3 Your TV
Remote control
Congratulations on your purchase, and welcome to Philips! To fully
benefit from the support that Philips offers, register your product at
www.philips.com/welcome.
{
z
Side controls and indicators
ACTIVE
SLEEP
CONTROL
FAV
TV
DEMO
y
VOLUME
5
e
SOURCE
AUTO
x
OPTIONS
f
MODE
4
MENU
CHANNEL
w
3
2
POWER
1
v
u
t
g
OK
BACK
INFO
EXIT
MENU
k
l
s
MUTE
r
VOL
CH
n
d MENU: Toggles the main menu on or off.
e VOLUME +/-: Increases or decreases volume.
q
a
1
2
3
4
5
6
7
8
9
PREV. CH
0
o
p
(Standby-On)
Switches the TV on or off. The TV is not powered off completely
unless it is physically unplugged.
b FAV
Displays a list of all channels marked as favorite.
EN
m
FORMAT
c CHANNEL +/ -: Switches to the next or previous channel.
6
h
i
j
a Standby indicator / remote control sensor (location may vary)
b POWER: Switches the TV on or off. The TV is not powered off
completely unless it is physically unplugged.
a
b
c
d
d Color buttons
Selects tasks or options.
{ ACTIVE CONTROL
The TV continuously measures and corrects incoming signals to
provide the best picture quality.
English
c TV
Switches back to the antenna source from EasyLink mode.
e SOURCE
Selects connected devices.
f OPTIONS
Activates the quick access menu (see ‘Use the quick access menu’
on page 13).
g OK
Activates a selection or accesses the menu.
h
(Navigation buttons)
Navigates through the menus.
i INFO
Displays information about the TV channel or accessory device.
The quality and accuracy of the information depends on the
broadcaster. You might see a difference in broadcast time if the
broadcast is from a different time zone.
j
(Fast Forward)
Searches forward on your EasyLink device.
k
(Record)
Starts or stops video recording on your EasyLink device.
l MUTE
Mutes or restores audio output.
m CH +/Switches to the next or previous channel.
n FORMAT
Selects a picture format .
o Number buttons
Select a channel, page or setting.
p . (Dot)
Press the dot (.) for digital channels.
q PREV CH
Returns to the previously viewed channel.
r VOL +/Increases or decreases volume.
s
Stops playback on your EasyLink device.
t
Searches backward on your EasyLink device.
u
Starts, pauses or resumes playback on your EasyLink device.
v MENU/EXIT
Turns the menu on or off.
w BACK
Returns to a previous screen.
x AUTO MODE
Cycles through the preset picture and sound settings (see ‘Use
Auto Mode’ on page 15).
y DEMO
Toggles the demo menu on or off.
z SLEEP
Sets a delay after which the TV switches to standby.
EN
7
4 Get started
Insert the remote control batteries
This section supplements information in the Quick Start. For
information about how to mount and install your TV, refer to the Quick
Start.
Position the TV
Warning
• Do not insert the power plug into the wall socket before all the connections are
made.
• Large screen TVs are heavy. Two people are required to carry and handle a large
screen TV.
• Before you move the TV, disconnect the cables to prevent breakage.
In addition to reading and understanding the safety instructions,
consider the following before positioning your TV:
• Ensure that you always have easy access to the power cord or
plug to disconnect the TV from the power.
• If the TV is mounted on a swivel base, ensure that no strain is
placed on the power cord when the TV is swiveled. Strain on the
power cord can loosen connections.
• The ideal viewing distance for watching TV is three times its
screen size.
• Position the TV where light does not fall on the screen.
• Connect your devices before you position the TV.
1
2
3
Slide the battery cover off the back of the remote control.
Insert the 2 supplied batteries (AAA). Be sure the + and - ends
of the batteries line up with the markings inside the case.
Slide the cover back into position.
Note
• Remove the batteries if not using the remote control for an extended period of
time.
Connect the antenna or cable
Use a Kensington lock
There is a Kensington security slot on the back of the TV. Prevent
theft by looping a Kensington lock between the slot and a permanent
object, such as a heavy table.
Cable
TV ANTENNA
Connect to an antenna
Any DTV programs that are broadcast in your area can be received for
free through an antenna connection.
Contact your local content provider or your local electronics retailer if
you are unsure about what HDTV programs are available in your area.
Broadcasters are transitioning from analog to digital TV. This means that
a given broadcaster can have channels available either in analog or in
digital, or both analog and digital at the same time.
The TV produces stereo sound only if a stereo signal is broadcast.
Connect to a cable
When your TV is connected to the cable socket, you might receive free
digital and high definition programs (depending on your cable provider).
The channel number for digital and high definition channels includes a
dot “.” For example, 11.1, 46.30, 108.201. Contact your cable provider
for more information.
Connect to a Direct Broadcast Satellite (DBS)
There are two main DBS systems: DirecTV and DishNetwork. These
systems require a separate, proprietary set-top box to decode signals
and send them to the TV. The set-top box contains a digital TV tuner for
receiving off-air digital broadcasts.
8
EN
3
Connect the power cord plug to the power outlet. Ensure that
the cord is tightly secured at both ends.
English
Contact your local DBS provider for more information about the
connections and the TV channels.
Connect to a set-top box
A cable box or satellite set-top box can be connected to the TV
through the following connections:
• ANT
• A/V (Composite Video and Audio)
• S-Video
• YPbPr (Component Video Input)
• HDMI
For information about how to connect a set-top box, see the Quick
Start provided.
Connect a set-top box through RF IN/OUT
If the TV is connected to a cable box or satellite set-top box via a
coaxial connection, set the TV to channel 3 or 4, or to the channel
specified by the service provider.
Disconnect the TV from the power
Caution
• Pull the power cord by the plug; do not pull on the power cord.
Cable
TV ANTENNA
R
R
R
R
L
L
L
L
L/R OUT
SERV. U
SPDIF
OUT
Pr
Pr
Pb
Pb
VIDEO
1
2
Unplug the power cord from the power outlet.
Unplug the power cord from the power connector at the back of
the TV.
L
S-VIDEO
Y
Y
AV 1
HDMI 1
HDMI 2
R
AV 2
AV 3
DVI AUDIO
IN
HDMI 3
Manage cables
Connect a set-top box through component video input or HDMI
R
L
L/R OUT
R
R
R
L
L
L
Pr
Pr
Pb
Pb
SERV. U
Note
• A cable holder is available in selected models only.
Route your power cord, antenna cable and all other cables through the
cable holder at the back of the TV. The holder helps keep your cables
tidy and easily manageable.
SPDIF
OUT
VIDEO
L
S-VIDEO
Y
Y
AV 1
HDMI 1
HDMI 2
R
AV 2
AV 3
DVI AUDIO
IN
HDMI 3
TV ANTENNA
R
L
L/R OUT
R
R
L
SERV.
VU
R
L
Pr
L
SPDIF
OUT
Pr
Pb
Pb
VIDEO
L
S-VIDEO
Y
Y
AV 1
HDMI 1
HDMI 2
R
AV 2
AV 3
DVI AUDIO
IN
HDMI 3
Connect the power cord
Warning
• Verify that your mains voltage corresponds with the voltage printed at the back of
the TV. Do not insert the power cord if the voltage is different.
1
2
Locate the power connector at the back of the TV.
The location of the power connector varies according to TV
model.
Insert the power cord fully into the TV power connector.
EN
9
Switch on and set up the TV
The TV turns on automatically after the power cord is inserted into the
power connector. The following screen appears:
Thank you for your purchase of this PHILIPS TV.
Please proceed with the following steps to set up your TV. For
the BESTpossible picture performance, contact your local
Cable / Satellite signal provider for High Definition signal
options available in your area.
Next
Press the GREEN button on your remote control to proceed.
Follow the on-screen instructions to select your language and complete
your TV setup. Installation takes approximately 10 minutes.
Note
• If you connect your TV to a cable box or satellite set-top box, you do not need to
install channels.
Finish the setup by selecting your location:
• If you choose [Retail store] your settings are erased each time
you turn off the TV. Use this mode for retail store displays only.
• If you choose [Home] you are guided through a choice of picture
display options. Press the left or right cursor buttons to select
your preferred screen.
10
EN
5 Use your TV
English
MUTE
CH
VOL
CH
FORMAT
This section helps you perform basic TV operations.
Switch your TV on/off or to standby
1
2
3
4
5
6
7
8
9
PREV. CH
0
POWER
•
•
•
•
1
2
3
4
5
6
7
8
9
PREV. CH
0
Press CHANNEL +/ - on the side of the TV.
For digital channels, press a number (1 to 999) followed by a dot
“.” and then the corresponding sub channel number (1 to 999).
Ex. 108.30.
Press CH +/- or enter a number on the remote control.
Press PREV CH to return to the previously viewed channel.
Adjust volume
To switch on
• Press POWER at the side of the TV.
• Press on the remote control.
To switch to standby
• Press on the remote control.
To switch off
• Press POWER at the side of the TV.
VOLUME
POWER
Switch channels
MUTE
VOL
CH
VOL
FORMAT
CHANNEL
POWER
To increase or decrease volume
• Press VOL +/- on the remote control or press VOLUME +/- on
the side of the TV.
To mute or unmute sound
• Press MUTE on the remote control to mute the sound.
• Press MUTE again to restore the sound.
To adjust headphone volume
• Press VOL +/- on the remote control or press VOLUME +/- on
the side of the TV. When headphones are plugged into the TV,
the loud speakers are automatically muted.
EN
11
Watch channels from a set-top box
To watch channels from a set-top box
1
Switch on the set-top box.
» The picture from your set-top box might appear automatically
on your screen.
2 Use the remote control of your set-top box to select channels.
If the picture does not appear
DEMO
SOURCE
SOURCE
AUTO
OPTIONS
MODE
1
2
Press SOURCE repeatedly to select the set-top box and wait a
few seconds for the picture to appear.
Use the remote control of your set-top box to select channels.
Watch connected devices
To watch connected devices
1
Switch on the connected device.
» The picture from your connected device might appear
automatically on the TV.
2 Use the remote control of the device to select channels.
If the picture does not appear
DEMO
SOURCE
SOURCE
AUTO
OPTIONS
MODE
1
2
Press SOURCE repeatedly to select the connected device and
wait a few seconds for the picture to appear.
Use the remote control of the device to select channels.
Watch a DVD
To watch a DVD
1
2
Insert a DVD disc into your player.
Press PLAY on the remote control of the DVD player.
» The DVD might automatically play on the TV.
If the picture does not appear
DEMO
SOURCE
SOURCE
AUTO
OPTIONS
MODE
1
2
12
Press SOURCE repeatedly to select the DVD player and wait a
few seconds for the picture to appear.
Use the remote control of the DVD player to play the disk.
EN
3
Press
to select the [Picture] menu.
and
English
6 Use more of your TV
TV menu
Use the quick access menu
The quick access menu gives direct access to some often-needed menu
items.
Note
TV Settings
Picture
Settings assistant
Contrast
Picture
Brightness
Sound
Color
Tint
• When digital channels are installed and broadcast, the relevant digital options are
Sharpness
displayed in the quick access menu.
1
Color temperature
Press OPTIONS on the remote control.
Dynamic contrast
Digital Natural Motion*
SOURCE
AUTO
OPTIONS
OPTIONS
*Available in selected models
4
MODE
5
2
Press or and then OK to access one of the following menus:
• Audio language, for digital channels only, where multiple
audio languages are broadcast.
• Closed captions (see ‘View closed captions (subtitles)’ on
page 19).
• Picture format (see ‘Summary of picture formats’ on page 14).
• Equalizer (see ‘Summary of sound settings’ on page 15).
• Clock (see ‘Set the clock’ on page 15).
6
Press or to select one of the picture settings, and press
enter the setting.
Press or to adjust the setting, and press
the change.
to
or OK to confirm
Press MENU/EXIT to exit.
Change picture settings by using the setting assistant
The settings wizard helps you to configure your picture settings.
1
Press MENU/EXIT on the remote control.
OK
EXIT
Change picture and sound settings
EXIT
MENU
INFO
MENU
Change picture and sound settings to suit your preferences. You can
apply pre-defined settings or change settings manually.
2
Change picture settings
1
Press MENU/EXIT on the remote control.
Press
to enter the [Settings assistant] menu.
TV menu Installation
OK
TV settings
Settings assistant
Settings assistant
EXIT
EXIT
MENU
2
INFO
Picture
Start now
MENU
Sound
Press
to enter the [TV settings] menu.
TV menu
TV settings
TV settings
Settings assistant
Features
Picture
Installation
Sound
3
4
Press to highlight [Start now], and press OK to start the
[Settings assistant].
» You are guided through a choice of picture display options.
Press the color buttons, , , and OK to make your selections
and store your setup.
EN
13
Summary of picture settings
Summary of picture formats
The following picture settings can be configured. Depending on the
format of the picture source, some picture settings are not available.
• [Contrast]: Adjusts the intensity of bright areas, keeping dark
areas unchanged.
• [Brightness]: Adjusts the intensity and details of dark areas.
• [Color]: Adjusts color saturation.
• [Tint]: Adjusts the color balance in an image.
• [Sharpness]: Adjusts the level of sharpness in image details.
• [Color temperature]: To set the color temperature to [Normal],
[Warm] or [Cool].
• [Dynamic contrast]: Automatically enhances contrast in an
image.
• [Digital Natural Motion]: In selected models only. Reduces field
and line flicker to display movement smoothly.
• [Noise Reduction]: Automatically filters out and reduces image
noise. Improves picture quality for weak video signals. You can
switch DNR on or off.
• [MPEG artifact reduction]: Smooths out transitions on digital
pictures. You can switch this feature on or off.
• [Color enhancement]: Makes colors more vivid and improves
the resolution of details in bright colors. You can switch this
feature on or off.
• [Active Control]: Corrects incoming signals for the best picture
possible, according to lighting conditions in the room. You can
switch [Active Control] to one of these settings: [Off], [On with
light sensor] or [On without light sensor].
The following picture formats can be selected.
Depending on the format of the picture source, some picture formats
are not available.
[Automatic]: (Not for PC mode.)
Enlarges the picture automatically to
best fi t the screen. The subtitles remain
visible.
[Super zoom]: (Not for HD and PC
mode.) Removes the black bars on the
side of 4:3 broadcasts. There is minimal
distortion.
[4:3]: Shows the classic 4:3 format.
[Movie expand 14:9]: (Not for HD and
PC mode.) Scales 4:3 format to 14:9.
[Movie expand 16:9]: (Not for HD and
PC mode.) Scales 4:3 format to 16:9.
Tip
• Save power with Eco TV. Switch [Active Control] to [On with light sensor]. The
TV will adjust the brightness according to the ambient room lighting, reducing
power consumption.
•
•
[Wide screen]: Stretches the classic 4:3
format to 16:9.
[Picture format]: Changes the picture format.
[Horizontal Shift]/[Vertical Shift]: Adjusts the horizontal and
vertical position of the picture. The availability of this settings
depends on certain signals or sources.
[Unscaled]: For HD and PC mode only,
and in selected models only. Allows
maximum sharpness. Some distortion
may be present due to the broadcaster’s
systems. Set your PC resolution to wide
screen mode for best results.
Change picture format
1
Press FORMAT on the remote control.
MUTE
CH
VOL
FORMAT
FORMAT
Change sound settings
2
Press or to select a picture format and press OK to confirm
your choice.
1
Press MENU/EXIT on the remote control and select [TV
settings] > [Sound].
TV menu
TV Settings
Sound
Settings assistant
Equalizer
Picture
Balance
Sound
Digital audio language
Alternate audio
Mono/Stereo
Incredible surround
AVL
TV Speakers
14
EN
3
4
Press or
the setting.
to highlight a sound setting and press
to select
Press or
change.
to adjust the setting, and press OK to confirm the
Press MENU/EXIT to exit.
Summary of sound settings
The following sound settings can be configured. Depending on the
sound source, some sound settings are not available.
• [Equalizer]: Adjusts individual sound frequencies.
• [Balance]: Adjusts the balance of the right and left speakers to
best suit your listening position.
• [Digital audio language]: Available for digital channels only, when
multiple languages are broadcast. Lists available audio languages.
• [Alternate audio]: Available for analog channels only, when a
main and second audio program (SAP) is broadcast. Select the
main or second audio program.
• [Mono]/[Stereo]: Selects between mono or stereo if stereo is
broadcast.
• [Incredible Surround]: Selects available modes for surround
sound.
• [AVL] ([Auto volume leveling]): Reduces sudden changes in
volume, for example, during commecials or when switching
channels. Set on or off.
• [TV Speakers]: Set on or off, or output sound to an EasyLinkcompliant device. [Master EasyLink] must be activated in the
[Preferences] menu to make the [TV Speakers] menu available.
When [Speakers EasyLink] is selected, the TV speakers
are disabled and TV sound outputs to the speakers of the
compatible EasyLink-compliant device. Adjust the volume using
the remote control of the EasyLink-compliant device.
• [Delta volume]: Levels out volume differences between channels
or connected devices. Switch to the connected device before
you change the delta volume.
Use Auto Mode
1
2
Press AUTO MODE to set your TV to a predefined picture and
sound setting.
Press or to select one of the following settings:
• [Personal]: The customized settings you defined by using
the [Picture] menu.
• [Sports]: Vivid picture settings and clear sound for high
action.
• [Standard]: For normal TV viewing.
• [Movie]: Brilliant picture settings for a cinematic experience.
• [Game]: Optimized for PCs, games consoles and
playstations.
• [Power Saver]: Eco TV settings for lower power
consumption.
Create and use lists of favorite channels
You can create lists of your preferred TV channels so that you can find
those channels easily.
Select a list of favorite channels
1
Press the FAV key on the remote control.
FAV
ACTIVE
SLEEP
CONTROL
FAV
TV
DEMO
» Your lists of favorite channels are displayed.
2
Press
or
to highlight a list, and press OK to select the list.
Create or edit a list of favorite channels
1
2
3
4
5
6
Press the FAV key on the remote control to display your lists of
favorite channels.
Press
or
to highlight a list, and press OK to select the list.
Press the green key to enter Edit mode.
» A list of channels is shown.
Press
or
to highlight a channel.
Press OK to select or deselect the highlighted channel.
» The channel is added to or removed from the list of favorite
channels.
Press the green button to exit.
Switch to one of the channels on a list
1
2
3
Press OK on the remote control to display the last list that you
selected.
Press
or
to highlight a channel.
Press OK to select the channel.
» The TV switches to that channel.
Tip
• Press CH+/- to select channels in a list or press the numeric keys to select channels
that are not in a list.
Set the clock
You can set the time on your TV and program your TV to switch off at
a specific time.
Set the time automatically
Some digital channels transmit the time. For these channels, you can
set the time automatically and choose which channel to read the time
from.
1
Press MENU/EXIT on the remote control and select
[Installation] > [Clock] > [Auto clock mode].
EN
15
English
2
2
Select [Automatic] and press
to confirm your choice.
TV menu I Installation
Clock
Auto clock mode
Auto clock mode
Manual
Auto clock channel
Automatic
Set the sleeptimer
Sleeptimer switches the TV to standby after a pre-defined period of time.
You can always switch off your TV earlier or reset the sleeptimer
during the countdown.
Press SLEEP repeatedly to select a value from 0 to 180 minutes. For
example, if you select 90, the TV switches to standby in 90 minutes.
Time zone
Tip
Daylight saving
• To turn the sleeptimer off, select 0 minutes.
3
4
5
6
Use child control and rating locks
(Optional) Select the channel from which the TV reads the time.
• Press and to enter the menu for [Auto clock channel].
• Press or to highlight a channel.
• Press to confirm your choice.
You can prevent your children from watching certain programs or
certain channels by locking the TV controls and by using ratings.
(Optional) Select the time zone.
• Press and to enter the menu for [Time zone].
• Press or to highlight the time zone.
• Press to confirm your choice.
1
(Optional) Set daylight saving.
• Press and to enter the menu for [Daylight saving].
• Press or to highlight [Automatic] or [Off].
• Press to confirm your choice.
Press MENU/EXIT to exit.
2
Press MENU/EXIT on the remote control and select
[Installation] > [Clock] > [Auto clock mode].
Select [Manual], and press
2
3
Set the time manually
1
Set or change your PIN
to confirm your choice.
TV menu I Installation
Clock
Auto clock mode
Auto clock mode
Manual
Time
Automatic
4
Press MENU/EXIT on the remote control and select [Features]
> [Change PIN].
Enter a 4-digit PIN on the number buttons of the remote
control.
• If you have a PIN, enter your current PIN.
• If you do not have a PIN or if you have forgotten your PIN,
enter 0711.
• You are asked to enter your new 4-digit PIN again.
Enter your PIN again to confirm.
» A message appears to confirm that your PIN has been
changed.
Press MENU/EXIT to exit.
Lock the TV
This section describes how to lock all channels on the TV. At the
specified time, screen is blanked out and the audio is muted.
1
2
Day
3
4
Ensure that the clock is set with the current time (see ‘Set the
clock’ on page 15).
Press MENU/EXIT on the remote control and select [Features]
> [Child lock] > [Lock after].
Enter your PIN .
Press
to select [Timer].
TV menu Features Child lock
3
4
5
6
7
8
Press to select [Time] and then press to set the time.
Use the format HH:MM. Select [AM]/[PM] for morning or
afternoon.
Timer
Timer
Off
Time
On
Press OK to confirm your choice.
Press
and
Press
or
to enter the menu for [Day].
to select the day.
Press OK to confirm your choice.
Press MENU/EXIT to exit.
5
16
Lock after
EN
Press to select [On] and activate the [Lock after] feature.
Select [Off] to deactivate the feature.
Press
•
to confirm your choice.
Press to select [Time] and press to set the time.
Use the format HH:MM, and select [AM]/[PM] for morning or
afternoon.
8 Press OK to confirm the time.
9 Press MENU/EXIT to exit.
10 Turn the TV off and on again.
A box with / indicates that some content ratings are
deselected. For example, for rating TV-14, you can deselect
one or more of the following content ratings: [(D) Dialog],
[(L) Language], [(S) Sex], or [(V) Violence].
TV menu Features Child Lock
TV ratings lock
TV-14
All
(D)Dialog
Lock a channel
None
(L)Language
This section describes how to lock specified channels. The channels
can be selected but the screen is blanked out and the audio is muted.
TV-Y
(S)Sex
TV-Y7
(V)Violence
1
2
3
Ensure that the clock is set with the current time (see ‘Set the
clock’ on page 15).
TV-G
TV-PG
Press MENU/EXIT on the remote control and select [Features]
> [Child lock] > [Channel lock].
TV14
TV-MA
Enter your PIN .
TV menu Features
4
5
6
Child Lock
Channel lock
Lock after
Channel 1
Sport
Channel lock
Channel 2
News
TV ratings lock
Channel 3
Movies
Movie ratings lock
Channel 4
Summary of TV ratings
Canada English ratings lock
Channel 5
Age rating
Content rating
All
None
TV-Y: Appropriate for children of all ages with
themes and elements suitable for children
aged 2-6.
TV-Y7: Programs designed for children age 7
and older.
TV-G: Programs suitable for all ages. These
programs contain little or no violence, no
strong language and little or no sexual dialog
or situations.
TV-PG: Programs contain elements that
some parents may find unsuitable for younger
children and which may need parental
guidance. The program may contain moderate
violence, sexual dialog and/or situations and
some strong language.
TV-14: Programs contain elements that may
not be suitable for children under 14 years
of age. These programs include one or more
of the following: intense violence, intense
sexual situations, suggestive dialog and strong
language.
TV-MA : Programs are designed to be viewed
by adults and may be unsuitable for children
under the age of 17. These programs may
contain graphical violence, explicit sexual
activity and/or crude or indecent language.
None
None
None
Canada French ratings lock
Channel 6
Region ratings lock
Channel 7
Press or and then press OK to lock one or more channels
or external sources.
Each channel has a box-graphic in front of it to indicate whether
it is locked:
• A box with X indicates that the channel is locked
• An empty box indicates that the channel is not locked
Press MENU/EXIT to exit.
Use the TV ratings lock
Your TV is equipped with a V-chip that allows you to control access
to individual programs based on their age rating and content rating.
The program content advisory data are sent by the broadcaster or by
the program provider.
If you receive channels through a set-top box or cable box connected
by HDMI, you cannot use the TV ratings lock. Your set-top box or
cable box must be connected through RF or AV connectors.
1
2
3
When you select [All], all items in the ratings list are locked.
When you select [None], programs with no rating and
programs with a rating of None are locked.
When you lock a rating, all ratings in the younger age
categories are automatically locked.
Press MENU/EXIT on the remote control and select [Features]
> [Child lock] > [TV ratings lock].
Enter your PIN .
Press or and then press OK to lock or unlock one or more
ratings.
Each rating has a box-graphic in front of it to indicate whether
programs carrying that rating are locked:
• A box with X indicates that all items in the content ratings
list are locked.
• An empty box indicates that no items in the content ratings
list are locked.
4
Press MENU/EXIT to exit.
[(FV) Fantasy
Violence]
None
[(D) Dialog]
[(L) Language]
[(S) Sex]
[(V) Violence]
[(D) Dialog]
[(L) Language]
[(S) Sex]
[(V) Violence]
[(L) Language]
[(S) Sex]
[(V) Violence]
EN
17
English
6
7
2
Use the movie ratings lock
You can control viewing of movies based on their Motion Picture
Association of America (MPAA) rating.
1
2
3
Press MENU/EXIT on the remote control and select [Features]
> [Child lock].
3
Press or to select [On], and press to confirm your choice.
If you select Off, you choose not to download the region rating
table and you cannot use the region rating lock.
Press to return to the TV menu and select [Features] > [Child
lock] > [Region ratings lock].
Select one of the menus for movie ratings lock.
• In the USA, select [Movie ratings lock].
• In Canada, select [Canada English ratings lock] or [Canada
French ratings lock].
TV menu Features
Region ratings lock
Child Lock
Lock after
Enter your PIN .
» The following screen shows the ratings in [Movie ratings lock].
Channel lock
Please enter your PIN
TV ratings lock
Movie ratings lock
TV menu Features
Child Lock
Movie ratings lock
Lock after
All
Channel lock
NR
TV ratings lock
G
Movie ratings lock
PG
Canada English ratings lock
PG-13
Canada French ratings lock
R
Region ratings lock
NC-17
Canada English ratings lock
Canada French ratings lock
Region ratings lock
4
5
X
4
5
Press or and then press OK to lock or unlock one or more
ratings.
Each rating has a box-graphic in front of it to indicate whether
programs carrying that rating are locked:
• A box with X indicates that all items in the rating are locked.
• An empty box indicates that no items in the rating are not
locked.
When you lock a movie rating, all items for ages below that
movie rating are automatically locked.
Press MENU/EXIT to exit.
6
Enter your PIN .
Press or and then press OK to lock or unlock one or more
ratings.
Each rating has a box-graphic in front of it to indicate whether it
is locked:
• A box with X indicates that the rating locked.
• An empty box indicates that the rating is not locked.
Press MENU/EXIT to exit.
Summary of US movie ratings
Rating
Description
All
NR
G
PG
All items in the ratings list are locked.
Not rated.
Movies with a mild content, suitable for all ages.
Movies for which parental guidance is
recommended. They may contain a few racy or
violent scenes or maybe some bad language.
Movies for which parental guidance may be
recommended if under age 13.
Restricted. The movies usually contain offensive
sex or bad language and may be unsuitable for
children under the age of 17. Parental guidance or
permission needed.
Even with parental permission, forbidden under
age 17. More offensive sex, violence or bad
language.
Movies which generally focus on sex, violence and/
or bad language. Also known as pornography.
Use the region ratings lock
PG -13
You can control access to digital programs based on downloaded
region ratings. Before you download a ratings table, ensure that
regional ratings are broadcast.
R
1
Press MENU/EXIT on the remote control and select
[Installation] > [Preferences] > [Downloaded rating table].
NC-17
TV menu Installation
Preferences
Downloaded rating table
Location
Off
Show emergency alerts
On
Downloaded rating table
18
EN
X
Closed captioning
Rating
Description
All
C
All items in the ratings list are locked.
Programming suitable for children under the age of
8 years. No profanity or sexual content of any level
allowed. Minimal comedic violence.
Suitable for children ages 8 and over. Low intensity
violence and fantasy horror allowed.
Movies with a mild content, suitable for all ages.
Movies for which parental guidance is
recommended. They may contain a few racy or
violent scenes or maybe some bad language.
Programming intended for children ages 14 and
over. May contain intense scenes of violence, strong
profanity, and depictions of sexual activity within
the context of a story.
Programming intended for viewers ages 18 and
over. May contain strong violence, language, and
sexual activity.
Closed captioning is an assistive technology that allows persons
with hearing disabilities to access television programming. Closed
captioning displays the audio portion of programming as text
superimposed over the video.
C8+
G
PG
14+
18+
Display captions
1
2
3
Description
All
G
All items in the ratings list are locked.
Appropriate for all ages with little or no violence
and little to no sexual content.
Appropriate for children 8 and up which may
contain little violence, some foul language and/or
little to no sexual content.
Appropriate for children 13 and up, with moderate
violence, language, and some sexual situations.
Persons under 13 should be accompanied by an
adult.
Appropriate for children 16 and up, with strong
violence, strong language, and strong sexual
content.
Only to be viewed by adults and contains extreme
violence and graphic sexual content/pornography.
8 ans+
13 ans+
16 ans+
18 ans+
View closed captions (subtitles)
The caption service displays transmitted CC-, T-, and CS- text. The
caption text can be displayed permanently or only when the TV is
muted.
Note
• This television provides a display of television closed captioning that conforms with
the EIA-608 standard and in accordance with Sections 15.119 of the FCCrules.
• If you connect your set-top box via HDMI or component video input, you cannot
•
•
select closed caption through the TV. You can select closed caption through the
set-top box only.
The captions do not always use correct spelling and grammar.
Not all TV programs and product commercials include closed caption information.
Refer to your area TV program listings for the TV channels and times of closed
caption shows. The captioned programs are usually noted in the TVlistings with
service marks such as ‘CC’.
Press MENU/EXIT on the remote control and select [Features]
> [Caption settings] > [Closed captions].
Press
press
or to select [On], [Off] or [On during mute], and
to confirm your choice.
Press MENU/EXIT to exit.
Select caption services
1
2
Summary of Canadian French movie ratings
Rating
English
Summary of Canadian movie ratings
Turn captions on.
Select a caption service for analog channels:
• Press MENU/EXIT on the remote control and select
[Features] > [Caption Settings] > [Caption service].
• Press .
• Press or to select one of the listed caption services, and
press to confirm your choice.
Note
• Not all caption services are used by a TV channel during the transmission of a
closed caption program.
3
4
Select a caption service for digital channels:
• Press and to enter the menu for [Digital caption
service].
• Press or to select one of the listed caption services, and
press to confirm your choice.
Press MENU/EXIT to exit.
Summary of caption services
Service
Description
CC-1, CC-2,
Dialog and descriptions for the action on the
CC-3, and CC-4 captioned TV program show on screen. Usually
CC1 is the most used. CC 2 can be used for
alternate languages if they are transmitted.
T-1, T-2, T-3 and Often used for channel guide, schedules, bulletin
T-4
board information for Closed Captions programs,
news, weather information, or stock market
reports.
CS-1, CS-2, CS- Service 1 is designated as the Primary Caption
3, CS-4, CS-5
Service. This service contains verbatim, or nearand CS-6
verbatim captions for the primary language being
spoken in the accompanying program audio.
Service 2 is designated as the Secondary Language
Service. This service contains captions in a
secondary language which are translations of the
captions in the Primary Caption Service. The other
service subchannels are not pre-assigned. It is up to
the discretion of the individual caption provider to
utilize the remaining service channels.
EN
19
Select how digital captions are displayed
Connect a USB storage device
You can choose the size, font, color, background and other
characteristics of the caption text.
1
2
1
2
3
4
Press MENU/EXIT on the remote control and select [Features]
> [Caption settings] > [Digital caption options].
Turn on the TV.
Connect the USB device to the USB port on the side of your TV.
» The main menu appears automatically.
Press or to highlight an option for digital captions, and press
to select the option.
Press or to highlight a setting for the option, and press
confirm your choice.
to
Press MENU/EXIT to exit.
Difficulties viewing closed captions on DTV programming
If you have difficulties viewing closed captions on DTV programming,
including HDTV, received from your subscription television provider,
you should:
• consult any consumer information and manuals/guides on closed
captions for DTV programming provided by your subscription
television provider;
• ensure that the captioning function on your set-top box, if
applicable, is turned on; and,
• ensure that the captioning function on your DTV is turned on.
If you are still unable to view closed captions on DTV programming,
you should contact your subscription television provider for
assistance.
TV menu
USB
TV settings
Picture
Features
Music
Installation
Video
USB
Disconnect a USB storage device
Caution
• To avoid damaging the USB device always exit the on-screen menu and wait five
seconds before you remove the USB device.
View photos, play music, and watch videos
on a USB device
1
2
Your TV is fitted with a USB port that enables you to view photos, listen
to music, and view videos stored on a USB device.
Further information is provided on USB devices (see ‘Notes for the use
of USB devices’ on page 34).
View your pictures on a USB device
Supported formats
JPEG
MP3
FAT/DOS-formatted memory
devices
Not-supported formats
Progressive JPEG files
File name exceeding 128 characters
File names containing a dot character
1
2
3
Wait five seconds then remove the USB device.
Connect your USB storage device to the TV.
Press
to enter the [USB] menu.
Press OK .
» [Picture] is highlighted.
USB
Picture
Supported video formats
Container
Audio codec
ASF (.wmv)
WMA
AVI
MP3
MP4
PS (.mpg)
Press MENU/EXIT to exit the on-screen menu.
Video codec
WMV
Mpeg4, DivX311,
DivX4, DivX5, Xvid
MPEG1 L3, HE-AAC H.264
MPEG1 L1/L2, AC3, MPEG1, MPEG2
LPCM
Picture
Image1.JPG
Music
Image2.JPG
Video
Folder 1
Folder 2
Note
• Philips cannot be held responsible if your USB device is not supported, nor will
•
•
•
20
Philips accept any liability for damage or loss of stored data.
The USB device is not supplied with the TV.
This DivX® Certified device must be registered in order to play DivX Video-onDemand (VOD) content. Generate the DivX VOD registration code for your
device and submit it during the registration process (see ‘Display the DivX®
registration code’ on page 22).
DivX VOD content is protected by a DivX DRM (Digital Rights Management)
system that restricts playback to registered DivX Certified devices. If you try to play
DivX VOD content not authorized for your device, the message “Authorization
Error” will be displayed and your content will not play.
EN
Thumbnails
4
5
Press
to enter the [Picture] folder.
Press
to select a picture.
» The pictures appear in a list or as thumbnails.
Press the green key to toggle between [List] and [Thumbnails].
Devicelabel1 Picture Folder 1
Folder 1
IMAGE1.JPG
IMAGE1.JPG
Listen to music on a USB device
1
2
3
4
Connect your USB storage device to the TV.
Press
English
6
to enter the [USB] menu.
Press OK .
Select [Music] and press .
IMAGE2.JPG
Devicelabel1 Music
IMAGE2.JPG
IMAGE1.JPG
640:480
Date Time
Music
Track1.MP3
Track1.MP3
Title:
Track2.MP3
Artist:
Track3.MP3
Album:
Track 1
Sentiment...
Duration: 00:02:53
Year:
Thumbnails
Devicelabel1 Picture Folder 1
Folder 1
IMAGE1.JPG
5
6
IMAGE1.JPG
Press
to select a song.
Press OK or
to play the selected song.
• Press the color buttons on the remote control to perform
the functions shown at the bottom of the screen.
• Press OK or
to pause, press OK or
again to resume.
• Press
to fast-forward search.
• Press
to fast-backward search.
• Press to stop playback.
Note
• If the function bar at the bottom of the TV screen disappers, press any color button
to make it reappear.
List
7
Press OK to view the picture or to start a slideshow of the
pictures.
• Press the color keys on the remote control to perform the
functions shown at the bottom of the screen.
Note
• If the function bar at the bottom of the TV screen disappears, press any color
button to make it reappear.
8
Press
7
Press
to select another song.
Accompany a slideshow with music
You can accompany a slideshow with background music. The audio
continues to be played even if the slideshow is stopped. The audio
stops when another song is played, or when the end of the music
album is reached.
1
2
Select a music album.
Start a slideshow.
and select another picture.
Configure how the slideshow is played
You can configure the following features of your slideshow.
Feature
Description
[Details]/[More details] Displays the picture name, date, size and
next picture in the slide show.
[Transitions]
Displays a list of available transition styles.
[Slide time]
Sets the amount of time that a picture is
shown.
[Rotate]
Rotates a picture.
[Zoom]
Displays a list of available magnifications.
Starts or stops a slide show.
[Start show]/[Stop
show]
EN
21
Use your TV in HD mode
Display the DivX® registration code
1
2
Press MENU/EXIT on the remote control.
Select [Installation] > [DivX® VOD].
» The DivX Video On Demand registration code is displayed.
TV menu
Installation
Not all models can be configured in high definition (HD) mode. For
information about your set, see the specification.
When you connect an HD device to your TV, configure the display
format of your TV. You might also have to configure the display format
of your HD device. For information about configuring your device, see
the documentation of the device.
DivX® VOD
Language
Supported video formats
Channels
The following video formats are supported in HD mode.
Preferences
Source labels
DivX® Video on Demand
Your registration code is: XXXXXXXX
Clock
Current software info
To learn more, visit www.divx.com/vod
DivX® VOD
Reset AV settings
Note
Resolution
Refresh rate
640 x 480p
720 (1440) x 480i
720 (1440) x 576i
720 x 480p
720 x 576p
1280 x 720p
1920 x 1080
1920 x 1080p
60Hz
60Hz
50Hz
60Hz
50Hz
50Hz, 60Hz
50Hz, 60Hz
24Hz, 25Hz, 30Hz, 50Hz, 60Hz
• Take note of your registration code. You will need this when you register your
Note
device before you buy or rent DivX movies.
• Your TV is HDMI compliant. If you do not get a good picture, change the video
format on your connected devices.
Watch videos on a USB device
1
2
3
4
Connect your USB storage device to the TV.
Press
to enter the [USB] menu.
Configure your TV in HD mode
1
2
Press OK .
Select [Video] and press .
Press MENU/EXIT on the remote control and select [Features]
> [Mode Selection].
TV menu
Devicelabel1 Video
5
6
Connect the HD device to your TV (see ‘Connect your devices’
on page 30).
Video
Video1.MPG
Features
Mode Selection
Video1.MPG
Title:
Mode Selection
PC
Video2.MPG
Director:
Caption settings
HDTV
Video3.MPG
Copyright:
Sleeptimer
Date:
Child Lock
Genre:
Change PIN
Duration:
Demo
Press
Video1.MPG
to select a video.
Press OK or
to play the selected video.
• Press the color buttons on the remote control to perform
the functions shown at the botton of the screen.
• Press OK or
to pause, press OK or
again to resume.
• Press
to fast-forward search.
• Press
to fast-backward search.
• Press to stop playback.
Note
• If the function bar at the bottom of the TV screen disappears, press any color
button to make it reappear.
7
Press
22
EN
to select another video.
3
4
5
Select [HDTV] and press
to confirm your choice.
If necessary, adjust the TV picture settings .
Press MENU/EXIT to exit.
Note
• [Mode Selection] appears for the following input signals:
• 1280x720p@60 Hz
• 1920x1080p@24/25/30/50/60 Hz
Use Philips EasyLink
Use an HDMI-DVI cable or an HDMI-DVI adaptor to connect a PC to
your TV. For sound, add an audio cable with a stereo mini jack.
Your TV supports Philips EasyLink, which uses the HDMI CEC
(Consumer Electronics Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors can be controlled by a
single remote control.
Caution
• Before you connect your PC, set the PC monitor refresh rate to 60Hz.
Note
• Philips does not guarantee 100% interoperability with all HDMI CEC devices.
Supported screen resolutions
The following screen resolutions are supported in PC mode:
Resolution
640 x 480
800 x 600
1024 x 768
1280 x 768
1280 x 1024
1360 x 768
1920 x 1080
Refresh rate
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
If necessary, adjust the picture position to the center of the screen
with the cursor buttons.
Configure your TV in PC mode
1
2
Connect the PC to your TV.
Press MENU/EXIT on the remote control and select [Features]
> [Mode Selection].
Note
•
•
•
•
[Mode Selection] appears for the following input signals only:
720x480p@60 Hz
1280x720p@60 Hz
1920x1080p@24/25/30/50/60 Hz
TV menu
Features
Mode Selection
Mode Selection
PC
Caption settings
HDTV
Note
• The EasyLink-compliant device must be switched on and selected as the source.
EasyLink features
One-touch play
When you connect your TV to devices that support one-touch play,
you can control your TV and the devices with one remote control.
For example, when you press Play on your DVD remote control, your
TV automatically switches to the correct channel to show the DVD
content.
One-touch standby
When you connect your TV to devices that support standby, you can
use your TV remote control to put your TV and all connected HDMI
devices in standby mode.
System audio control
When you connect your TV to HDMI CEC compliant devices, your
TV can switch automatically to play audio from the connected device.
To use one-touch audio, you must map the audio input from the
connected device to your TV.
You can use the remote control from the connected device to adjust
the volume.
Remote control (RC) key forwarding
RC key forwarding allows you to control EasyLink-compliant devices
using your TV remote control.
Sleeptimer
Child Lock
Change PIN
Demo
3
4
Select [PC] and press OK to confirm your choice.
If necessary, adjust the picture settings .
Note
• Set the picture format to [Unscaled] for wide-screen PC resolutions.
5
Press MENU/EXIT to exit.
EN
23
English
Use your TV as a PC monitor
EasyLink buttons
Set TV speakers to EasyLink mode
You can control EasyLink-compliant devices with the following
buttons on the remote control of your TV.
When enabled, this feature automatically turns off TV speakers when
content from an EasyLink-compliant home theater system is played.
Audio is played through the speakers of the home theater system.
Button
(Play/Pause)
(Stop)
(Record)
EasyLink function
Starts, pauses or resumes playback on your
EasyLink device.
Stops playback on your EasyLink device.
Starts or stops video recording on your EasyLink
device.
Searches backward.
(Fast
Backward)
(Fast Forward) Searches forward.
0-9 (Numeric
When EasyLink is enabled, selects a title,
buttons)
chapter or track.
Navigates through the menus of the EasyLinkcompliant device.
OK
Activates a selection or accesses the menu of
the EasyLink-compliant device.
OPTIONS
Displays the menus of the EasyLink-compliant
device. Note that when MENU/EXIT is pressed,
the TV menu is displayed.
(Standby-On)
When EasyLink is enabled, switches the TV and
all EasyLink devices to standby. Note that you
must press and hold (Standby-On) for at least
3 seconds for this to occur.
Note
• [Master EasyLink] must be activated in the [Preferences] menu to make the [TV
Speakers] menu available.
1
2
3
4
5
Press MENU/EXIT.
Press the Navigation buttons to select [TV settings] > [Sound].
» The [Sound] menu appears.
Select [TV Speakers].
» The [TV Speakers] menu appears.
Select [Speakers EasyLink].
» TV speakers are set to EasyLink mode.
Press MENU/EXIT to exit.
Use the demo mode
You can use demonstrations to better understand the features of your
TV. Some demos are not available on certain models. When a demo is
available, it is displayed in the menu list.
1
Tip
Press MENU on the remote control and select [Features] >
[Demo].
• Press the TV button to switch back to the antenna source from EasyLink mode.
TV menu
Enable or disable EasyLink
Note
• Do not enable EasyLink if you do not intend to use it.
1
2
3
Caption settings
Ambilight*
Sleeptimer
120Hz*
Child lock
Pixel Plus
Change PIN
HDNM*
Demo
Power Usage
Select [Installation] > [Preferences] > [Master EasyLink].
Press
or
to select [On] or [Off].
Press MENU/EXIT.
Select [Features] > [RC Key Forwarding].
Press OK .
Press
or
to highlight an HDMI connector.
Press OK to enable RC key forwarding for the selected HDMI
connector.
Note
• When RC key forwarding is enabled for an HDMI connector, the
icon appears
between the HDMI connector and the connection label when you press SOURCE .
24
Demo
Press MENU/EXIT on the remote control.
Enable or disable remote control key forwarding
1
2
3
4
5
Features
EN
2
3
4
*In selected models only
Press or
demo.
to highlight a demo, and press OK to start the
Follow the on-screen instructions to enjoy the demo.
Press MENU/EXIT to exit.
7 Install channels
Channels
The first time you setup your TV, you are prompted to select a menu
language and to install TV and digital radio channels (if available). This
chapter provides instructions on how to reinstall and fine tune channels.
English
TV menu Installation
Autoprogram
Autoprogram
Weak channel installation
Start Now
Installation mode
Uninstall channels
Select your menu language
1
Press MENU/EXIT on the remote control and select
[Installation] > [Language].
TV menu
Installation
Language
Language
English
Channels
Francais
Preferences
Espanol
2
3
Press OK to start the installation.
• If you run [Autoprogram] on locked channels, you must to
enter your PIN code.
• If you have forgotten your PIN, reset it .
Select [Cable] or [Antenna] and press OK .
Source labels
TV installation
Clock
Current software info
System searching. Please wait...
DivX® VOD
Reset AV settings
2
3
Select a language and press OK to confirm your choice.
Press
Analog channels found:
0
Digital channels found:
0
to return to the [Installation] menu.
Set your location to home
You can set the location of your TV to home or retail store. Choose
home so that you can change the predefined settings for picture and
sound.
1
2
3
Press MENU/EXIT on the remote control and select
[Installation] > [Preferences] > [Location].
•
Select [Home] and press OK to confirm your choice.
Press
•
to return to the [Installation] menu.
Automatically install channels
Before you install channels, ensure that you are registered with your
cable TV provider and that your equipment is correctly connected.
1
Press MENU/EXIT on the remote control and select
[Installation] > [Channels] > [Autoprogram] > [Start now].
•
4
When [Antenna] is selected, the TV detects antenna signals.
It searches for NTSC and ATSC channels available in your
area.
When [Cable] is selected, the TV detects signals supplied
by cable. It searches for NTSC, ATSC, and QAM modulated
channels available in your area.
When complete, this message appears [Channel search
completed.].
Follow the on-screen instructions to complete the installation.
Optimize the signal quality from your
antenna
You can optimize your signal quality by tuning in ATSC channels with
weak signals, and adjusting the antenna.
1
2
3
4
Press MENU/EXIT on the remote control and select
[Installation] > [Channels] > [Installation mode] mode .
Select [Antenna] and press
Press
and
to confirm your choice.
to enter [Weak channel installation].
Highlight a channel from the list of TV channels and press the
green color button on the remote control.
» The signal strength for the channel is displayed.
EN
25
5
6
Adjust your antenna to maximize the signal strength.
Press MENU/EXIT to exit.
Uninstall and reinstall channels
When you uninstall a channel, you remove it from the list of stored
channels. Uninstalled channels are not reinstalled during an installation
update.
1
Press MENU/EXIT on the remote control and select
[Installation] > [Channels] > [Uninstall channels].
TV menu Installation
Channels
Uninstall channels
Autoprogram
52
Weak channel installation
53
Installation mode
54
Uninstall channels
55
Show emergency alerts (EAS)
The SCTE18 standard defines an emergency alert signaling method for
use by cable TV systems. EAS can be broadcast to digital devices such as
digital set-top boxes, digital TVs, and digital VCRs.
The EAS scheme allows a cable operator to disseminate information
related to state and local emergencies and warnings.
EAS contain the following information:
• Emergency alert text
• Start time and date
• End time and date
• Priority
EAS with priority maximum or high are always displayed on your TV.
However, you can configure your TV not to show EAS messages with
medium or low priority.
EAS is not possible with a multimedia browser or with analog video
sources.
You can always remove the message from the screen. The message
display overlaps menus and other messages on the screen.
1
Press MENU/EXIT on the remote control and select
[Installation] > [Preferences] > [Show emergency alerts].
56
2
3
4
5
Press
57
TV menu Installation
58
Preferences
Show emergency alerts
59
Location
Always
Show emergency alerts
Skip low priority
Downloaded rating table
Skip medium/low priority
to enter the list of stored channels.
Press or to select the channel you want to uninstall, and
press the green key on the remote control.
The channel is removed from the channel list. Press the green
key again to reinstall the channel.
Press MENU/EXIT to exit.
Return your settings to default values
2
When you return picture and sound settings to their default values the
channel installation settings are not affected.
1
Press MENU/EXIT on the remote control and select
[Installation] > [Reset AV settings].
TV menu
Installation
Reset AV settings
Language
Channels
Start now
Preferences
Source labels
Clock
Current software info
Reset AV settings
2
3
26
Press to highlight [Start now], and press OK to reset the
picture and sound settings.
Press MENU/EXIT to exit.
EN
3
4
Highlight an option:
• [Always]: Displays all emergency alert messages
• [Skip low priority]: Shows all messages except low priority
messages
• [Skip medium/low priority]: Shows maximum and high
priority messages only
Press
to confirm your choice.
Press MENU/EXIT to exit.
Download the software
Philips continuously tries to improve its products and we strongly
recommend that you update the TV software when updates are
available.
New software can be obtained from your dealer or downloaded from
the www.philips.com/welcome website. Use the type number of your
TV (e.g. 42PFL5603D/27) to find information.
2
Check your current software version
Press MENU/EXIT on the remote control and select [Installation] >
[Current software info].
» The version and a description of the current software is
displayed.
TV menu
1
3
4
1
2
3
Channels
Release version:
xxxxx
Preferences
Source labels
Find information and software related to your TV and download
the latest software upgrade file to your PC.
Decompress the ZIP-file.
Copy the autorun.upg file to the root directory of the USB
device.
Upgrade software
Installation
Language
On your PC, open a web browser and go to www.philips.com/
welcome.
4
5
Prepare the software upgrade (see ‘Prepare for the software
upgrade’ on page 27 ).
Connect your USB device to the USB port on the side of your
TV.
» The TV scans the USB device for the updated software and
automatically enters upgrade mode.
Read the on-screen instructions and confirm that you want to
continue with the installation.
When the software upgrade is complete, remove the USB
device .
Turn the TV off and on again.
» The TV starts up with the new software.
Clock
Current software info
Reset AV settings
Prepare for the software upgrade
You require the following equipment:
• A PC with web browsing capability.
• An archive utility that supports the ZIP-format (e.g. WinZip for
Windows or StuffIt for Mac OS).
• A USB memory stick.
Note
• Only FAT/DOS-formatted portable memory is supported.
• New software can be obtained from your dealer or can be downloaded from the
www.philips.com/welcome website.
• Use only software upgrades that can be found on the Philips web site.
Warning
• Do not remove the USB device during the software upgrade.
• If there is a power drop during the upgrade, do not remove the USB device from
the TV. The TV continues the upgrade as soon as the power comes back.
• If you try to upgrade to a software version lower than the current version, a
•
confirmation message is displayed. Downgrade to older software only in case of real
necessity.
If an error occurs during the upgrade, retry the procedure or contact your dealer.
EN
27
English
8 Update your TV software
9 Connect devices
This section describes how to connect various devices with different
connectors and supplements examples provided in the Quick Start.
h AV3S-VIDEO (back): S-Video (back) input connector to be used
with Audio L/R connectors for camcorder, game console, etc.
When you use the S-Video (back) for video signals, do not use
Composite video (back) for video signals.
i HDMI 1/2/3: Digital audio and video input from high-definition
digital devices such as Blu-ray players.
Caution
Side connectors
• Disconnect the mains cord before connecting devices.
1
Note
• Different types of connectors may be used to connect a device to your TV,
depending on availability and your needs.
R
AUDIO
Connection overview
L
2
Back connectors
VIDEO
TV ANTENNA
1
3
2
4
R
R
R
R
L
L
L
L
L/R OUT
Pr
Pr
Pb
Pb
5
S-VIDEO
6
VIDEO
Y
AV 1
HDMI 1
L
AV 2
AV 3
HDMI 3
8
a AUDIO OUT L/R : Analog audio output to home theaters and
other audio systems.
b Signal input from an antenna, cable or satellite.
c AV1 and AV2: Video input from analog devices such as DVD,
receiver, game console, etc. This connector is used with audio
input.
d AV3 Composite video (back): Video input for analog devices
such as DVD, camcorder, game console, etc. To be used with
audio input.
e For use by service personnel only.
f Digital audio output to home theaters and other digital audio
systems. For connection to home theatre systems.
EN
USB
5
a Stereo audio output to headphones or earphones.
DVI AUDIO
IN
9
28
4
7
R
HDMI 2
g Audio input for HDMI3.
HDMI 4
SPDIF
OUT
S-VIDEO
Y
3
SERV. U
b Composite video: Video input for analog devices such as DVD,
camcorder, game console, etc. To be used with audio input.
c S-Video (side) to be used with Audio L/R connectors for
camcorder, game console, etc. When you use the S-Video (side)
for video signals, do not use the Composite video (side) input for
video signals.
d HDMI 4 (side): Digital audio and video input from high-definition
digital devices such as Blu-ray players.
e Data input from USB storage devices.
Composite - Basic quality
English
Select your connection quality
HDMI - Highest quality
Composite video/audio cable (yellow/red/white)
Supports high-definition signals and gives highest picture and sound
quality. Video and audio signals are combined in one cable. You must
use HDMI for full high-definition video and to enable Philips EasyLink .
For analog connections. Composite cables usually combine a yellow
video cable with a red/white audio L/R cable. Match the cable colors
when you connect to the TV.
Label your connections
Tip
• To connect to a PC without an HDMI connector, use a DVI-HDMI adaptor and a
separate audio cable.
When you connect devices, you can label the connections to help you
to identify where devices are connected.
1
Note
• Philips HDMI supports Highbandwidth Digital Contents Protection (HDCP). HDCP
Press MENU/EXIT on the remote control and select
[Installation] > [Source labels].
TV menu
is a form of Digital Rights Management that protects high definition content in DVD
or Blu-ray Discs.
Component (Y Pb Pr) - High quality
Installation
Source labels
Language
AV1
Channels
AV2
Preferences
AV3
Source labels
HDMI1
Clock
HDMI2
Reset AV settings
HDMI3
Software upgrade
Side HDMI
Side AV
Component video cable (red/green/blue) and audio L/R cable (red/white)
Supports high-definition signals but gives lower picture quality than
HDMI. Component cables combine a red/green/blue video cable
with a red/white audio L/R cable. Match the cable colors when you
connect to the TV.
2
3
4
5
6
Press
to enter the list of available connections.
Press
or
to highlight a connection in the list.
Press to enter the list of devices for the connection, and press
or to highlight a device.
Press
to confirm your choice.
Press MENU/EXIT to exit.
S-Video - Good quality
S-Video cable and audio L/R cable (red/white)
For analog connections. Use an S-Video cable together with an audio
L/R cable.
EN
29
Connect your devices
Connect a set-top box, DVD player/recorder and game
console via HDMI
This section describes how to connect a selection of devices with
different connectors. Different types of connectors can be used to
connect a device to your TV. The following sections describe examples
only, other configurations are possible.
When you connect composite or component cables, match the cable
colors to the connectors on the TV.
TV ANTENNA
Connect a DVD player/recorder via composite
connectors
R
R
R
R
L
L
L
L
Pr
Pr
Pb
Pb
Y
Y
L/R OUT
SERV. U
SPDIF
OUT
VIDEO
L
S-VIDEO
TV ANTENNA
AV 1
HDMI 1
R
AV 3
AV 2
HDMI 2
DVI AUDIO
IN
HDMI 3
Or/Ou/O RF OUT
R
R
R
R
L
L
L
L
Pr
Pr
Pb
Pb
Y
Y
SERV. U
L + R + VIDEO
SPDIF
OUT
L/R OUT
O UT
VIDEO
IN
L
S-VIDEO
AV 1
HDMI 1
R
AV 2
AV 3
HDMI 2
DVI AUDIO
IN
Connect a DVD player/recorder via HDMI-DVI and
DIGITAL AUDIO OUT connectors
RECO RDER
HDMI 3
O UT
TV ANTENNA
Set-top box
RF IN
Do not place your recorder too close to the screen because some
recorders can be susceptible to signals.
R
R
R
R
L
L
L
L
L/R OUT
Pr
Pr
Pb
Pb
Y
Y
Or/Ou/O RF OUT
SERV. U
SPDIF
OUT
VIDEO
AUDIO
IN
L
TV ANTENNA
L + R + VIDEO
R
R
R
R
L
L
L
L
S-VIDEO
SERV. U
R
AV 1
R
HDMI 1
AUDIO
AV 2
AV 3
HDMI 2
AUDIO
OUT
DVI AUDIO
IN
HDMI 3
L
L/R OUT
Pr
Pr
Pb
Pb
SPDIF
OUT
VIDEO
VIDEO
OUT
L
S-VIDEO
Y
Y
DVI
HDMI
S-VIDEO
RF IN
R
RECORDER
HDMI 4
AV 1
HDMI 1
HDMI 2
AV 2
AV 3
DVI AUDIO
IN
RF OUT
HDMI 3
USB
CABLE
OUT
RF IN
Connect a set-top box via a composite connector
L + R + VIDEO
TV ANTENNA
If your recorder has an S-VHS video jack: For improved picture
quality, connect an S-Video cable with the S-Video input. Connect
the audio cables to the audio L and R input jacks of AV3/side AV.
Or/Ou/O RF OUT
Note
R
R
R
R
L
L
L
L
Pr
Pr
Pb
Pb
Y
Y
L/R OUT
• When you use an S-Video connector, do not connect any device to the AV3/side
L + R + VIDEO
SPDIF
OUT
VIDEO
L
S-VIDEO
AV video jack.
AV 1
If you use mono equipment, the left loudspeaker reproduces sound
but the right speaker does not. Use a mono to stereo adapter (not
supplied) for sound reproduction via all internal loudspeakers.
SERV. U
HDMI 1
HDMI 2
R
AV 2
AV 3
CABLE
DVI AUDIO
IN
HDMI 3
OUT
RF IN
Set-top box
If your device has an S-VHS video jack, improve the picture quality as
follows:
• Connect an S-Video cable to the S-Video input of AV3/side AV
30
EN
Connect the audio cables to the audio L and R input jacks of
AV3/side AV.
When you use the S-Video connector, do not connect any device to
the video jack of AV3 or the side AV.
Only the left loudspeaker reproduces sound for mono equipment.
Use a mono to stereo adapter (not supplied) for sound reproduction
via all internal loudspeakers.
Connect a PC
Connect a PC with an S-Video connector at the back
TV ANTENNA
Connect a DVD player/recorder via component video
output connectors (YPbPr) and analog audio
Selected TV models can display 1080i, 1080p, 720p and 480p DTV
signals when connected to a DTV set-top box. Set the output of the
cable box to either 1080i, 1080p, 720p or 480p. A DTV signal must
be available in your area.
English
•
R
R
R
R
L
L
L
L
Pr
Pr
Pb
Pb
Y
Y
L/R OUT
SERV. U
SPDIF
OUT
VIDEO
L
AUDIO
OUT
S-VIDEO
AV 1
HDMI 1
R
AV 2
DVI AUDIO
IN
AV 3
HDMI 2
HDMI 3
S VIDEO
TV ANTENNA
R
R
L
L/R OUT
R
L
L
Pr
Pr
Pb
Pb
Y
Y
Connect a PC with an S-Video connector at the side
SERV. U
R
AV1 / AV2 :
AUDIO L + R
L
SPDIF
OUT
TV ANTENNA
VIDEO
L
S-VIDEO
R
R
R
R
R
L
L
L
SERV. U
R
AUDIO
AV 1
HDMI 1
AV2
AV 3
HDMI 2
DVI AUDIO
IN
AV1 / AV2 :
YPbPr
HDMI 3
DVD / Set top box
L
L
Pr
Pr
Pb
Pb
Y
Y
SPDIF
OUT
VIDEO
L/R OUT
VIDEO
L
AUDIO
OUT
S-VIDEO
S-VIDEO
R
HDMI 4
AV 1
HDMI 1
AV 2
DVI AUDIO
IN
AV 3
HDMI 2
HDMI 3
USB
S VIDEO
Connect a digital home theater amplifier
Connect a PC with a DVI connector
TV ANTENNA
TV ANTENNA
R
L
L/R OUT
R
R
R
L
L
L
Pr
Pr
Pb
Pb
SERV. U
SPDIF
OUT
VIDEO
DIGITAL
AUDIO
OUT
R
R
R
R
L
L
L
L
Pr
Pr
Pb
Pb
Y
Y
SERV. U
SPDIF
OUT
L
L/R OUT
AUDIO
IN
S-VIDEO
Y
Y
R
VIDEO
L
S-VIDEO
AV 1
HDMI 1
HDMI 2
AV 2
AV 3
DVI AUDIO
IN
HDMI 3
DIGITAL
AUDIO
IN
AV 1
HDMI 1
R
AV 2
AV 3
HDMI 2
AUDIO
OUT
DVI AUDIO
IN
HDMI 3
DVI
HDMI
For legal reasons, the digital audio signal can be muted for copyprotected PCM audio qualities on accessory devices connected
through HDMI.
EN
31
Connect a PC with an HDMI connector
TV ANTENNA
R
R
R
R
L
L
L
L
L/R OUT
Pr
Pr
Pb
Pb
SERV. U
SPDIF
OUT
VIDEO
L
S-VIDEO
Y
Y
AV 1
HDMI 1
HDMI 2
R
AV 2
AV 3
DVI AUDIO
IN
HDMI 3
HDMI
32
EN
Possible cause and solution
The TV is not connected to the power.
Press at the side of the TV or on the remote
control.
Ensure that the power cord is connected tightly to
the TV power connector and to the power socket
outlet.
Remove the power cord from the power socket
outlet, wait 60 seconds and reconnect the power
cord.
Connect the TV to a different power socket outlet.
Error message HDCP authentication fail.
Ensure that your HDMI cable is certified.
on the screen
Press SOURCE on the remote control to switch to
with HDMI
another source and then switch back to the HDMI
connection.
source.
Reset the accessory device and the TV.
Turn on the TV.
Select the HDMI channel.
Turn on the accessory device.
While the TV and the accessory device are
powered on, unplug either end of the HDMI cable
and then reinsert the cable.
No sound is
An incorrect HDMI port is connected or an audio
detected from cable is not connected.
the PC.
Connect a DVI-HDM cable to the HDMI 3 port
on the TV.
Connect an audio cable to the DVI AUDIO IN
port on the TV.
Press SOURCE on the remote control, and select
the HDMI 3 source.
TV does not
Batteries are installed incorrectly, or low battery
respond to the power.
remote control. Ensure the indicator light on the TV blinks when
you press the remote control buttons.
Ensure that you are using the TV remote control.
Ensure that the batteries are inserted correctly and
do not need to be replaced.
Remove the power cord from the power socket
outlet, wait 60 seconds and reconnect the power
cord.
Broadcast video format.
The picture
Press FORMAT on the remote control to select
is distorted,
stretched out, the best picture format.
For some accessory devices, the picture format
or has black
bars on the side must be set in the accessory device.
or top.
Insecure/incorrect connection.
The picture is
mostly red and Ensure all the connections are made according to
the color code.
green, or the
picture misses Push the component cables all the way into the
YPbPr sockets on the TV.
red when
connected to
an accessory
device via
component
cables.
No sound
on the TV
loudspeaker.
Problem
No power or
indicator light.
Bad picture
quality with
a coaxial
connection.
No picture or
sound.
Volume level is set to zero - increase the volume
Sound is muted - press MUTE on the remote control.
Headphones are connected - ensure that
headphones are not plugged into the TV.
Audio cable is not connected - for AV connection,
ensure that the Audio L/R cable is connected as
described in Connect your devices (see ‘Connect
your devices’ on page 30). If you use a component
cable, ensure that you have not crossed the red
audio cable with the red video cable.
Audio output setting for the accessory device is
incorrect. For HDMI connections, some accessory
devices have an HDMI audio output setting that
must be turned on for HDMI to HDMI connections.
Standard definition channels are not as clear as
high definition channels - connect the devices via
component or HDMI cables.
No picture or sound - ensure you have selected
the correct channel.
Incomplete channel installation
If the TV receives channels via an AV connection,
set the TV to the correct source input.
If the TV is connected directly to the wall via a coaxial
connection, perform the auto-installation again.
Cannot control Confirm that the connected devices are EasyLink
compliant and are connected to your TV via an
your TV and
HDMI cable. Not all brands of devices such as DVD
connected
devices with one players use the same system as Philips EasyLink.
remote control. Other brands might not work with Philips EasyLink.
Download an electronic copy
To obtain an electronic copy of this manual:
1
2
3
4
5
Point your browser to www.philips.com/support.
Choose your country of location.
Enter the model number or a keyword in the “Find your
product” field. Alternatively, you can browse the catalogue.
Click the description or model.
Under Product support, click User manuals.
Contact us
If you cannot resolve your problem, refer to the FAQ for this TV at
www.philips.com/support.
If the problem remains unresolved, contact the Customer Support
Center in your country.
Warning
• Do not attempt to repair the TV yourself. This may cause severe injury, irreparable
damage to your TV or void your warranty.
Note
• Please have available your TV model and serial number before contacting us. These
numbers are available on the back and side of your TV, as well as on the packaging.
EN
33
English
10 Troubleshooting
11 Notes for the use of USB
devices
Digital Content Issues
• Only FAT (DOS) formatted (initialized) portable memory is
supported. Errors in this formatting can result in unreadable
content. If such problems appear try to re-format the card. Be
aware that formatting the card will also delete all the content on
it (pictures, music, …).
• The following file types are supported: .jpg, .jpeg, .mp3, .alb, .m3u
and .pls.
• Only linear JPEG picture formats are supported. Progressive
JPEG and JPEG2000 encodings are not supported.
• The length of a filename or directory name is limited to the
length specified by the FAT16/32 file systems.
• Max. levels of nested directories is 19.
• Never use the supported file type extensions (.jpg, .jpeg,
.mp3, .alb, .m3u and .pls) as extensions for directories as these
directories will be treated as corrupted files.
• The MP3 decoder does not support MPEG1 Layer 1 or Layer 2
playback.
• MP3 Pro files can be played with normal MP3 quality.
• The access and response time of the content on a device can
differ depending on the type or brand of the device.
• The access and response time of the content on a device will
increase the more unsupported or corrupted files are on the
device.
Digital Camera Issues
• If a USB connection between your digital camera and the TV
isn’t working, you can try the solutions below to resolve your
problem.
• Make sure your digital camera is switched on and verify if the
configuration of your digital camera is correct (see the manual of
your digital camera for more information).
• Some digital cameras allow you to switch off the USB interface.
Make sure that the USB interface is switched on before
connecting to the TV.
• If you have a digital camera with only internal memory (no
removable memory) you can try to copy the content manually to
a USB memory device (e.g. Philips KEY product) using a personal
computer.
• Some digital cameras allow you to switch between PTP (Picture
Transfer Protocol) or “PC Link” and USB Mass Storage or “PC
Drive”. Make sure that you select USB Mass Storage or “PC
Drive” on your digital camera.
• If your camera supports different interface settings be sure to try
them one by one or contact the reseller of your camera to find
out the correct setting.
USB Memory Device Issues
• Devices connected to the USB port of your TV must be “Mass
Storage Class” compliant. If your device (digital camera. MP3
player, portable hard disk, …) is not “Mass Storage Class”
compliant it will not be detected by the content browser of the
TV.
• The following subsets of the Mass Storage Class specification are
supported:
• The implementation of the TV is based on the “Universal Serial
Bus Mass Storage Class Specification Overview” (v1.2, June 23,
2003) including all documents referenced by the document. The
document can be found on the USB standardization website
(www.usb.org).
34
EN
•
•
•
•
•
Full support of the USB Mass Storage Class Bulk-Only Transport
(bInterfaceProtocol = 50h).
Full support of SubClass Code = 05h; SFF-8070i spec.
Full support of SubClass Code = 06h; SCSI transparent
command set.
For large USB memory devices, when you are in the Content
Browser, it may take a long time before you can access your files.
When using a USB portable hard disk, and due to the high
power consumption of the hard disk, it is advised to use the
external power supply of the portable hard disk to guarantee
proper working under all conditions
English
12 Product information
Note
• Product information is subject to change without prior notice.
Picture enhancement
Type:
Brightness:
Aspect Ratio:
Viewing Angles:
Built-in digital tuner:
Dynamic Dimming BL:
Ambient Light Sensor:
1080p 120Hz
500 cd/m2
16:9
178 (V) by 178 (H)
ATSC/QAM
Yes
Yes
Sound enhancement
Mono/Stereo:
Mono, Stereo, Incredible surround
Power output (RMS Watts): 20 W
Equalizer:
5 band
Ease of use
Video modes:
PC input:
Photo Slideshow:
MP3 Playback:
Video Playback:
Automatic, 4:3, Movie Expand 14:9,
Movie Expand 16:9, Super Zoom, Wide
Screen, Unscaled
via HDMI
Yes (JPEG files only)
Yes (MP3 files only)
Yes (MPEG, WMV, AVI, MP4)
Connections
Component video input
with Audio L/R:
Composite video input with
audio L/R and S-Video:
HDMI:
Digital audio out:
Headphone:
USB:
2, supporting 480i/p, 576i/p, 720p,
1080i, 1080p @24Hz-60Hz
2
4
ver1.3a HDMI supporting video: 480i/
p, 576i/p, 720p, 1080i, 1080p @24Hz60Hz
PC-input: up to WUXGA
Yes, supporting AC-3 and PCM
1 (on the side of TV)
1 (on the side of TV)
Power
Auto multi-voltage:
110V-240V~/50-60 Hz
EN
35
13 Warranty
LIMITED WARRANTY
ONE (1) YEAR
WARRANTY COVERAGE:
This warranty obligation is limited to the terms as set forth
below.
WHO IS COVERED:
This product warranty is issued to the original purchaser or the
person receiving the product as a gift against defects in materials
and workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
WHAT IS COVERED:
This warranty covers new products if a defect in material or
workmanship occurs and a valid claim is received within the
Warranty Period. At its option, the company will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or serviceable used parts and is at least functionally equivalent or most
comparable to the original product in current inventory, or (3)
refund the original purchase price of the product.
Replacement products or parts provided under this warranty are
covered against defects in materials and workmanship from the
date of the replacement or repair for ninety (90) days or for the
remaining portion of the original product’s warranty, whichever
provides longer coverage for you. When a product or part is
exchanged, any replacement item becomes your property and the
replaced item becomes company property. When a refund is
given, your product becomes company property.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements
can result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS:
This Limited Warranty applies only to new company manufactured products that can be identified by the trademark, trade
name, or logo affixed to it. This Limited Warranty does not apply
to any hardware product or any software, even if packaged or
sold with the product, as manufacturers, suppliers, or publishers
may provide a separate warranty for their own products packaged with the bundled product.
The company is not liable for any damage to or loss of any programs, data, or other information stored on any media contained
within the product, or other additional product or part not covered by this warranty. Recovery or reinstallation of programs,
data or other information is not covered under this Limited
Warranty.
or a part that has been modified without written company permission, or (d) if any serial number has been removed or defaced,
or (e) product, accessories or consumables sold “AS IS” without
warranty of any kind by including refurbished product sold “AS
IS” by some retailers.
This Limited Warranty does not cover:
• Shipping charges to return defective product.
• Labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.
• Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
screen markings resulting from viewing fixed stationary content for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of the company.
• Damage or claims for products not being available for use, or
for lost data or lost software.
• Damage from mishandled shipments or transit accidents when
returning product.
• A product that requires modification or adaptation to enable
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
• Product lost in shipment and no signature verification receipt
can be provided.
• Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE…
Contact the Customer Care Center at:
1-866-771-4018
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON
THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
ON THIS PRODUCT IS LIMITED IN DURATION TO THE
DURATION OF THIS WARRANTY.
Some states do not allow the exclusions or limitation of incidental or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations or exclusions may
not apply to you.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-supplied product,
(b) to damage caused by service performed by anyone other than
company approved Authorized Service Location, (c) to a product
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
P&F USA, P.O. Box 672768, Marietta, GA 30006
0908
36
EN
14 Index
Active Control
Antenna
14
8
C
Cables
component
composite
HDMI
quality
S-Video
YPbPr
Channels
favorite list
Child lock
lock channels
PIN code
ratings lock
Clock
Closed captions
Component cable
Composite cable
Connections
antenna
quality
D
Demo
DivX
E
EasyLink
Eco TV
Environmental care
F
Favorite list
H
HDMI cable
Home mode
L
Location
R
29
29
29
29
29
29
15
17
16
17
15
19
29
29
8
29
24
20
23
14, 15
5
15
29
10, 25
N
Noise reduction
Ratings
Remote control
insert batteries
overview
Retail store mode
S
Settings assistant
Side controls
Sleep timer
Slideshow
Software
Sound settings
Standby
Subtitles
S-Video
16
23
14
14
9
17, 18
8
6
10
13
6
16
21
27
14, 15
6 , 11
19
29
T
Technical specifcations
Timer
Troubleshooting
TV
as PC monitor
connections
controls
in High Definition
menu
position
ratings
remote control
screen care
software
switch channels
switch on
troubleshooting
U
USB
35
15
33
23
8 , 28 , 31, 32
6
22
13
8
17
6, 8
5
27
11
10, 11
33
20, 34
10, 25
V
M
Menu
child lock
quick access menu
MPEG artifact reduction
Music
USB
with slideshow
Parental control
child lock
PC
Picture format
Picture settings
Power
16
13
14
21
21
Video
Volume
adjust
automatic leveling
delta
mute
22
11
15
15
11
Y
YPbPr
29
14
EN
37
English
A
P
38
EN