Installing and Getting Started for the ScanMaker® 4700

Installing and
Getting Started
for the ScanMaker® 4700
Version
Version
for PC (Windows 98 / 2000 / 2000 PRO)
and Mac (Apple iMac / G3 / G4 with
built-in USB ports)
This document provides information on how to install your Microtek scanner on a PC or Mac using the scanner's USB
interface and describes the features of the five scanner buttons on the front panel of the scanner.
Installation for PC and Macintosh
1. Unpack scanner
2. Unlock the carriage
Open your scanner package and check the components as
stated in your packing list. Before proceeding any further,
check that you have the items listed on the packing list. If
any item is missing, contact Microtek Customer Service.
1.
2. Pull the lever towards you slightly until you hear a
“click” which indicates that the scanner carriage has
been unlocked.
Your Microtek ScanMaker scanner comes with a USB
built-in interface. For installation, use the scanner’s USB
port. See the graphic below to locate the different ports on
the back of the scanner, including the scanner accessory
port.
Accessory Port
USB Port
3. Install software
Power Adapter
Power Switch
Energy Star Notice
As an ENERGY STAR Partner,
Microtek International, Inc. has
determined that this scanner
meets the ENERGY STAR
guidelines for energy efficiency.
For PC Users
Trademarks
Microtek®, ScanMaker®, and ScanWizard® are
registered trademarks of Microtek International Inc.
Adobe®, Acrobat®, and PhotoDeluxeTM are
trademarks or registered trademarks of Adobe
Systems Incorporated. Caere®, OmniPage®, and
PageKeeper® are registered trademarks of Caere
Corporation. TrellixTM and Trellix WebTM are
trademarks of Trellix Corporation. Ulead® and
PhotoImpact® are registered trademarks of Ulead
Systems, Inc. Macintosh® and Apple® are registered
trademarks of Apple Computer, Inc. Windows® is a
registered trademark of Microsoft Corporation. All
other products or name brands are trademarks of
their respective holders.
Copyright © 2000 Microtek International Inc.
With the scanner turned off, tilt the scanner on its side
to locate the carriage lever (located at the bottom left
side).
1.
Turn on your computer.
2.
Insert the Microtek CD-ROM into your CD-ROM
drive. The Microtek Software Installer screen should
automatically come up.
Note: If the Microtek Software Installer screen does not
come up automatically, double-click the following in
succession: “My Computer” on your Windows desktop;
the CD-ROM icon; and cdsetup.exe to start the installer
program.
http://www.microtek.com
I49-002796B, March 2000
English
Installation for PC and Macintosh
Deutsch
eb Micr
otek Edition
e) Tr ellix W
Web
Microtek
Edition. This is your software
to publish and update web sites.
Español
Nederlands
Italiano
Français
Click the
“Install”
button for
each
software
on the list
to install.
3.
When the Microtek Software Installer screen appears,
click the “Install” button for each software program in
the order that it appears on the screen to install all
software components.
f)
Adobe Acr
obat Reader
Acrobat
Reader. This is your documentation
reader for reading and printing the manuals on the
CD-ROM.
4.
After all the software has been installed, click EXIT
located at the bottom right of the Microtek Software
Installer screen.
5.
Install any other image-editing software included with
your scanner package.
6. Restart your computer.
For Macintosh Users
For each software, follow the on-screen instructions
during installation. Default values are specified at every
point during installation; simply accept these values to
continue installation until you finish.
1.
Turn on your computer.
2. Install the image-editing software that came with your
scanner package.
In some applications, auxiliary information (such as
the Readme file) may be displayed after that particular
program finishes installing. Simply click the “X” close
box at the upper right corner of the displayed window
to return to the Microtek Software Installer. Do not
restart your computer until all the software has
been installed
installed.
3.
Insert the Microtek CD-ROM into your CD-ROM
drive, and double-click the CD-ROM when it appears
on your Macintosh desktop to open it.
4. Next, install the software on your Microtek CD-ROM,
including the following:
• Caere OmniPage
OmniPage. This is your OCR text-scanning
software.
a) Microtek ScanWizard 5
5. This is your scanner
controller program for capturing images from your
scanner. Follow the on-screen instructions during
installation. After ScanWizard 5 finishes installing, you
will be prompted to restart your computer. Select No
to continue installing the rest of the software.
• Microtek ScanWizard 5
5. This is your scanner
controller program for capturing images from your
scanner and delivering it to your image-editing
application. ScanWizard 5 requires System 8.6 or
later.
b) Ulead PhotoImpact. This is your image-editing
application that gives you advanced performance for
adding/designing special effects through the use of
powerful tools.
Note: For iMac users, please visit Apple’s web site at
http://www.apple.com for any iMac updates you
may need.
c) Caere OmniPage
OmniPage. This is your OCR text-scanning
software. During installation of Caere OmniPage, you
will be asked to select your “Source”. Make sure
Microtek ScanWizard 5 is selected. When you have
finished installing Caere OmniPage, restart your
computer later.
obat Reader
• Adobe Acr
Acrobat
Reader. This is your
documentation reader for reading and printing the
manuals on the CD-ROM.
To install each application, open the software
program's folder, and then click the “Installer” icon.
Follow the screen instructions until installation is
completed.
d) Caere PageKeeper Standard
Standard. This is your document
management program.
5.
2
Restart your Macintosh.
English
Installation for PC and Macintosh
1. Plug the power adapter into the back of the scanner,
and plug the other end into a wall outlet or power
source. Make sure no other cable is connected to the
scanner except the power adapter at this point
point.
Français
2.
3. Connect one end of the USB cable to your computer,
and connect the other end of the cable to the scanner’s
USB port.
Deutsch
4. Connect scanner
Press the scanner’s power switch at the back of the
scanner.
For Macintosh users
Español
For PC users
Nederlands
Italiano
The green light on the front of the scanner will blink
for a few seconds and then stay on solid.
❶
❸
On
❷
Off
❸
❶
On
Off
❷
❶
On
❷
3
Off
❸
English
Deutsch
5. Reading the
documentation
6. Troubleshooting
If you encounter installation problems, see the
troubleshooting file in the Techinfo folder on your
Microtek CD-ROM.
For PC users
1.
Insert the Microtek CD-ROM into your CD-ROM
drive.
2.
When the Microtek Software Installer comes up on
your screen, click the View Manual button that
corresponds to the manual you wish to read. This will
launch Adobe Acrobat Reader, and you can then read
or print the manual.
Nederlands
Italiano
Français
Installation for PC and Macintosh
Español
Click the
“View
Manual”
button to
see the
manuals
For Macintosh users
1.
Insert the Microtek CD-ROM into your CD-ROM
drive.
2.
Launch the Adobe Acrobat Reader program. From the
File menu, choose the Open command, and open the
file for the manual that you wish to view; manuals
have a .pdf extension to their file name. The manual is
then ready to be viewed or printed.
4
English
There are three different ways to scan: A. Using the scanner buttons B. Launching ScanWizard 5 as a stand-alone
ogram C. Scanning fr
om an image-editing application
program
from
application. Each method is described below.
pr
E-mail
Cancel
Setup
Scans the image and sends it to your
printer, transforming your scanner
and printer into a convenient copy
station. Simply specify the number of
copies you want.
Scans the image and delivers it
directly to your e-mail editor.
Quickly stops and abandons any
scan job in progress. Just hit this
button and execute the next
command.
Activates the Microtek Scanner
Configuration control panel for
customizing your buttons and
setting your preferences.
A. Using the scanner buttons
One way to scan is to use the five buttons on the front
panel of your ScanMaker 4700. These buttons are Scan,
Copy, E-mail, Cancel, and Setup. Before doing your first
scanner operation, it is suggested that you perform the
appropriate setup procedures first.
1.
2.
Take note of the following
following:
Launch the Microtek Scanner Configuration Utility
(MSC). You can do this by: a) Pressing the Setup
button on the scanner’s front panel; b) Double-clicking
the MSC icon from the desktop; or c) For Windows
only: From Windows, go through the Windows menu
-- click Start, Programs, ScanWizard 5, Microtek
Scanner Configuration.
•
In the “Send to Application field”, make sure you select
Adobe PhotoDeluxe or the image-editing application
of your choice. This makes sure that after you finish a
scan, PhotoDeluxe is launched and the scanned image
is displayed. If you choose “None”, the image will be
scanned and saved to the Destination location, but will
not display automatically.
•
Check the Destination field to see where the image is
saved after scanning. The image can then be opened
from this location in the future.
3. Next, click the Copy tab, then specify the Copy
settings accordingly.
When the MSC panel appears, click the Scan tab, then
specify the Scan settings accordingly.
4.
Click the E-mail tab, then specify the E-mail settings
accordingly.
5. Now that you have completed the Setup procedure,
you can click the Scan, Copy, or E-mail buttons on the
scanner’s front panel to carry out the corresponding
action, based on the settings you have specified for
that action. See the graphic at the top of the page for
details on what each scanner button can do.
5
Nederlands
Copy
Captures high resolution images
with outstanding quality that can
automatically be saved as files or
sent to another application for
further processing.
Español
Scan
Italiano
Français
The ScanMaker 4700 is equipped with five scanner buttons on the front panel that give you quick access to the most
frequently used functions. These buttons are Scan, Copy, E-mail, Cancel and Setup. The parameters for each button can be
set through the Microtek Scanner Configuration (MSC) utility.
Deutsch
How to Scan
English
Deutsch
Français
Italiano
Nederlands
Español
B. Launch ScanWizard 5 as a
stand-alone program
Note: Make sure you close the MSC utility before launching
ScanWizard 5. Do not run ScanWizard 5 and MSC at the
same time.
Take note of the following
following:
• When ScanWizard 5 is launched, pressing either the
Scan, Copy or E-mail button from the scanner’s front
panel will automatically perform a “fast preview” of the
Scan to
material. The “Scan
to” button from the ScanWizard 5
control panel will stay or be transformed into Copy or
E-mail according to the function selected on the front
panel button.
• The Setup button control can only be used for the
MSC utility. It is disabled or not functional when using
ScanWizard 5
5.
A second way to scan is to launch ScanWizard 5 as a
stand-alone program. a) For PCs: Go through the Windows
menu -- click Start, Programs, ScanWizard 5, ScanWizard
5; or b) For PCs or Macs: Double-click the ScanWizard 5
icon on your desktop.
1. When ScanWizard 5 launches, it automatically
performs a fast preview of the material and displays it
in the preview area.
2. In the preview window, you can re-size the floating
dotted line around the image by dragging on the edge
or corner of the scan frame to determine the final size
of the actual scan.
3. To make adjustments to the image, use the tool
Scan to
buttons. To scan the image, click the “Scan
to” button.
The image is then scanned and saved to a file. Aside
from saving, you may also deliver the scanned image
to an image-editing software, an e-mail editor, or a
web browser.
Save the scanned image to a file,
or deliver it to an image-editing
program, an e-mail editor, or a web
browser.
ScanWizard 5
for
Windows
Click on this button to switch to the
Advanced Control Panel window
Click here to
exit
ScanWizard 5
Tool
buttons
for
image
settings
Tool
buttons
for
image
settings
Re-size dotted line for size of the actual scan
6
ScanWizard 5
for
Macintosh
2.
Federal Communications Commission Interference Statement
Federal Communications Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
•
This equipment (Model: MRS-2400G12U) has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
•
•
•
•
FCC Caution: To assure continued compliance, (example - use only shielded interface cables
when connecting to computer or peripheral devices). Any changes or modifications not
expressly approved by the party responsible for compliance could void the user’s authority
to operate this equipment.
Telephone No:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Note: 1) A shielded of USB interface cable with ferrite core installed on the scanner connector
end must be used with this equipment. 2) AC adapter with ferrite core installed on the
scanner connector end must be used with this equipment.
CAUTION
Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Responsible Party:
Click Scan
Scan, and the image will be scanned and
delivered to PhotoDeluxe. For more details on
PhotoDeluxe, consult the PhotoDeluxe on-line help.
Take note :
If ScanWizard 5 is launched from any image-editing
application (such as PhotoDeluxe), the Copy and
E-mail on the ScanWizard 5-Standard Control Panel
interface will be deactivated. However, using the Copy or
E-mail buttons from the scanner’s front panel will cause the
scanner to perform a fast preview.
3. Do either of the following: a) For PCs: Select Microtek
ScanWizard 5 as your “Source”, and click OK. b) For
izar
d5T
wain as your “Source”,
Macs: Select ScanW
ScanWizar
izard
Twain
and click OK.
•
•
•
6.
Loi Han
3715 Doolittle Drive
Redondo Beach, CA 90278-1226
U.S.A.
1-310-297-5000
Trade Name
Model Number
ScanMaker 4700 MRS-2400G12U
Tested to Comply
With FCC Standards
FOR HOME OR OFFICE USE
7
Deutsch
English
When PhotoDeluxe launches, click the following in
succession: the Get Photo button, the Get Photo tab,
and the Scanners button.
The ScanWizard 5-Standard Control Panel appears.
See the procedures described in the previous section,
“Launching ScanWizard 5 as a stand-alone program”
on page 6 (#1 to #3) for more information.
Français
1. Launch Adobe PhotoDeluxe. a) For PCs: Go through
the Windows menu -- click Start, Programs, Adobe,
PhotoDeluxe, Adobe PhotoDeluxe. b) For Macs:
Launch PhotoDeluxe from its folder.
5.
Italiano
4. Click the Scanner icon from the PhotoDeluxe Panel to
launch ScanWizard 5.
Nederlands
In the example below, we use Adobe PhotoDeluxe 2.0, an
image-editing application that is included in a separate CD
in your scanner package. Refer to page 2 for software
installation details.
Español
C. Scanning from an image-editing
application