Welcome
Quick start guide
1
2
3
Connect
Install
Enjoy
philips
What’s in the box
CD640 Base station
OR
CD640/CD645 Handset
CD645 Base Station
+ -
Power supply unit for
base station
Welcome
Quick start guide
1
2
3
Connect
Install
Enjoy
- +
Line cord
CD640 or CD645
User manual
2 x AAA Rechargeable
batteries
Quick start guide
Guarantee
The line adaptor may not be attached to the line cord.You may find the line
adaptor in the box. In this case, you have to connect the line adaptor to the line
cord first before plugging the line cord to the line socket.
In multi-handset packs, you will find one or more additional handsets, chargers
with power supply units and additional rechargeable batteries.
WARNING Always use the cables and batteries that are supplied with your
phone.
1
Connect
Connect the base station
1. Insert the plug of the power cord into the
socket under the base station.
2. Insert the plug of the line cord into the
socket under the base station.
3. Connect the other end of the line cord
together with the line adaptor if
necessary, to the telephone line socket
and the other end of the power cable
to the electricity socket.
2
2
1
3
Install
Insert rechargeable batteries and charge
Insert batteries
Charge handset for 24 hours
Set the time
1.
2.
3.
4.
5.
Press
to access the main menu
/
to select Clock & Alarm
Press
Press
to select Set Date/Time
Press
Enter the current time (HH:MM) in 12-hour format and the current date
(MM/DD/YY)
6. Press
to save the settings
3
Enjoy
Make a call
Press
and dial the number
OR
Dial the number and press
or
Answer a call
When the phone rings, press
or
.
End a call
Press
Set the alarm
1.
2.
3.
4.
5.
Press
Press
Press
Press
Press
/
to access the main menu
to select Clock & Alarm
/
to select Alarm
and
/
to select Off, On Once, or On Daily
and
to save the settings
Press
Press
Press
Press
Press
/
to access the main menu
to select Personal Set
/
to select Handset Name
and
to enter the handset name
to save the settings
3111 285 34641
Rename your handset
1.
2.
3.
4.
5.
Set the earpiece volume
During a call:
/
to select the earpiece volume from level one to level five
Press
Set a wallpaper to be displayed in standby mode
1.
2.
3.
4.
5.
Press
Press
Press
Press
Press
/
to access the main menu
to select Personal Set
and
/
to select Wallpaper
and
/
to scroll to your desired wallpaper
to save the settings
Set the ring melody
1.
2.
3.
4.
5.
6.
Press
Press
Press
Press
Press
Press
/
to access the main menu
to select Personal Set
to select Handset Tones
and
/
to select Ring Melody
and
/
to scroll to your desired ring melody
to save the settings
Store a number in the phonebook
1.
2.
3.
4.
5.
6.
Press
to access the main menu
Press
/
and
to select Phonebook
Press
to select New Entry
Enter the name (maximum 12 characters)
Press
to enter the number (maximum 24 digits)
Press
to choose a group (<No Group>, <Group A>, <Group B>,
<Group C>)
7. Press
to save the entry
Access the phonebook
1. Press
2. Press
3. Press
to access the phonebook
/
to select your desired phonebook entry
to view the details of your selected phonebook entry
Listen to new messages recorded on answering machine (applicable to
CD645 only)
1.
2.
3.
4.
Press
on the base station to turn on the answering machine
Press
on the base station, playback of the oldest new message will begin.
Press
to skip the current message and play the next message
Press
to go back to previous message if it is pressed within one second of
current message playback
5. Press
to replay current message if it is pressed after one second of current
message playback
6. Press
to increase or
to decrease speaker volume during message playback
7. Press
to delete the current message
See CD645 user manual for details about the answering machine function.
Troubleshooting
For more information, see the user manual that came with your CD640 or
CD645.
Solution
Problem
● Charge the batteries for at least 24 hours
No dialing tone
● Move closer to the base station
● Use the line cable provided in the box
● Move closer to the base station
Poor audio quality
● Move the base station at least one metre away
from any electrical appliances
● Register the handset to the base station
The
is blinking
● Move closer to the base station
● Try again by disconnecting and connecting the
The handset LCD
displays nothing
base station power supply and follow the
procedure to register a handset
● Make sure the two supplied rechargeable batteries
have been inserted into the battery compartment
● Make sure the supplied batteries are
charged up
● Check your subscription with your
Caller Line Identification
network operator
(CLI) service does not
work
Need help?
User Manual
See the User Manual that came with your CD640 or CD645.
Online help
www.philips.com/support