Philips Cineos 55PL9774 User's Manual

™
HDTV Monitor
with Pixel Plus™™
55PL9774
62PL9774
Highlights
• Liquid-crystal-on-silicon (LCOS) High-definition
Imaging
• High-resolution Display—1280 x 720 pixels
• Pixel Plus™
Features
• Digital Natural Motion™
• Active Control™—analyzes and adjusts incoming signal
• Two-tuner, Double-window PIP (Picture-in-Picture)
•
•
•
•
•
Dolby® Virtual Surround, 40-watt RMS
3D Y/C Comb Filter
HD Component and DVI Input
Side AV Convenience Jacks
Matching stand and swivel available
8/5/04
Refer to the Quick Use and Setup Guide (supplied with your TV)
for information on basic connections, remote control button
descriptions, on-screen menu language, and Autoprogram.
3135 035 22883
Return your Product Registration Card today
to get the very most from your purchase.
Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out.
Complete and return your Product Registration Card at once to ensure:
*Proof of
Purchase
*Product Safety
Notification
*Additional Benefits
of Product Ownership
Returning the enclosed card guarantees
that your date of purchase will be on file,
so no additional paperwork will be required
from you to obtain warranty service.
By registering your product, you'll receive
notification - directly from the manufacturer - in the rare case of a product
recall or safety defect.
Registering your product guarantees that
you'll receive all of the privileges to
which you're entitled, including special
money-saving offers.
Know these
safetysymbols
Congratulations on your purchase,
and welcome to the “family!”
Dear PHILIPS product owner:
Thank you for your confidence in PHILIPS.You’ve selected one of the
best-built, best-backed products available today.We’ll do everything in
our power to keep you happy with your purchase for many years to
come.
As a member of the PHILIPS “family,” you’re entitled to protection by
one of the most comprehensive warranties and outstanding service
networks in the industry.What’s more, your purchase guarantees
you’ll receive all the information and special offers for which you
qualify, plus easy access to accessories from our convenient home
shopping network.
Most importantly, you can count on our uncompromising commitment to your total satisfaction.
All of this is our way of saying welcome - and thanks for investing in
a PHILIPS product.
“bolt of lightning” indicates
t This
uninsulated material within your unit
may cause an electrical shock. For the safety of everyone in your household, please
do not remove product covering.
The “exclamation point” calls attention to features for which you
should read the enclosed literature closely
to prevent operating and maintenance
problems.
CAUTION: To prevent electric shock,
match wide blade of plug to wide slot, fully
insert.
ATTENTION: Pour éviter les choc électriques, introduire la lame la plus large de
la fiche dans la borne correspondante de la
prise et pousser jusqu’au fond.
s
For Customer Use
P.S. To get the most from your PHILIPS purchase, be
sure to complete and return your Product Registration
Card at once.
Enter below the Serial No. which is
located on the rear of the cabinet. Retain
this information for future reference.
Model No. ________________________
Serial No. ________________________
Visit our World Wide Web Site at http://www.philips.com
2
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any of the ventilation openings. Install in accordance
with the manufacturers instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce
heat.
Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and third grounding prong. The wide blade or third prong are provided for your
safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they
exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving
the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for
long periods of time.
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
This product may contain lead and mercury. Disposal of these
materials may be regulated due to environmental considerations.
For disposal or recycling information, please contact your local
authorities or the Electronic Industries Alliance: www.eiae.org
Damage Requiring Service - The appliance should be serviced
by qualified service personnel when:
A. The power supply cord or the plug has been damaged; or
B.
17.
18.
19.
20.
21.
22.
Objects have fallen, or liquid has been spilled into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or
exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
Tilt/Stability - All televisions must comply with recommended
international global safety standards for tilt and stability properties
of its cabinet design.
• Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet which could ultimately overturn the product.
• Also, do not endanger yourself, or children, by placing electronic equipment/toys on the top of the cabinet. Such items could
unsuspectingly fall from the top of the set and cause product damage and/or personal injury.
Wall or Ceiling Mounting - The appliance should be mounted to
a wall or ceiling only as recommended by the manufacturer.
Power Lines - An outdoor antenna should be located away from
power lines.
Outdoor Antenna Grounding - If an outside antenna is connected to
the receiver, be sure the antenna system is grounded so as to provide
some protection against voltage surges and built up static charges.
Section 810 of the National Electric Code, ANSI/NFPA No. 701984, provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding connectors, location
of antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode. See Figure below.
Object and Liquid Entry - Care should be taken so that objects
do not fall and liquids are not spilled into the enclosure through
openings.
a) Warning: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled
with liquids, such as vases, should not be placed on this apparatus.
Battery Usage CAUTION - To prevent battery leakage that may
result in bodily injury, property damage, or damage to the unit:
• Install all batteries correctly, with + and - aligned as marked on
the unit.
• Do not mix batteries (old and new or carbon and alkaline, etc.).
• Remove batteries when the unit is not used for a long time.
Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC
that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
Example of Antenna Grounding
as per NEC - National Electric Code
GROUND CLAMP
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
GROUNDING CONDUCTORS (NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
ELECTRIC SERVICE EQUIPMENT
3
Contents
Setting the TV for Stereo Programming . . . . . . . . . . . . . . .43
INTRODUCTION
. . . . . . . . . . . . . . . . .2
Turning the AVL (Audio Volume Leveler) on or off . . . . . .44
Safety/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Adjusting the Delta Volume . . . . . . . . . . . . . . . . . . . . . . . .45
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Selecting an AutoSound™ Option . . . . . . . . . . . . . . . . . . .46
Welcome/Registration of Your TV
FEATURES
CONNECTING ACCESSORY DEVICES
TO YOUR TV
Using Closed Captioning . . . . . . . . . . . . . . . . . . . . . . . . . .47
Information about TV Signals . . . . . . . . . . . . . . . . . . . . . . . .6
Setting the Sleeptimer . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Descriptions of Jacks, Cables, and Connectors . . . . . . . . . . .7
Setting the On Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Panel Jack Compatibility Information . . . . . . . . . . . . . . . . . .8
CH
Pre-connection Recommendations . . . . . . . . . . . . . . . . . . .9
CHANNELS
Using the Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Connecting a VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Removing Channels from the Channel List . . . . . . . . . . . .51
Connecting a VCR and Cable Box . . . . . . . . . . . . . . . . . . .11
Using Lock Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Connecting an S-Video Device . . . . . . . . . . . . . . . . . . . . .12
Using Lock After . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Connecting a Standard DVD Player . . . . . . . . . . . . . . . . . .13
Blocking Programming Based on TV Ratings . . . . . . . . . . .54
Connecting a Progressive-scan DVD Player . . . . . . . . . . . .14
Blocking Programming Based on Movie Ratings . . . . . . . . .55
Connecting an HD Satellite Receiver to YPbPr . . . . . . . . .15
Turning the Antenna Attenuator on or off . . . . . . . . . . . . .56
Connecting an HD Satellite Receiver to DVI . . . . . . . . . . .16
G
Connecting Surround Sound Equipment . . . . . . . . . . . . . .17
GENERAL
Connecting to the Side Inputs: Video Game System . . . . .18
Using Surf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Labeling the Audio/Video Input Sources . . . . . . . . . . . . . . .19
Using Dual Screen and PIP . . . . . . . . . . . . . . . . . . . . . . . . .58
Changing Channels or Input Sources in Dual Screen/PIP . .59
USING THE REMOTE CONTROL
Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . .20-21
Resetting the Audio/Video Settings to Factory
Default Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Programming the Remote Control . . . . . . . . . . . . . . . .22-23
Selecting an On-screen Display Option . . . . . . . . . . . . . . .61
Programming the Remote Control: Set-up Codes . . . . .24-25
Operating Accessory Devices with the TV Remote . . .26–27
Setting up or Changing a PIN (Personal
Identification Number) . . . . . . . . . . . . . . . . . . . . . . . . . .62
Using Active Control™ Plus . . . . . . . . . . . . . . . . . . . . . . .28
Setting the Subwoofer Control . . . . . . . . . . . . . . . . . . . . .63
Setting the Clock—Auto Clock Mode . . . . . . . . . . . . . . . .64
USING THE ON-SCREEN MENUS
Setting the Clock Manually . . . . . . . . . . . . . . . . . . . . . . . .65
PICTURE
Adjusting/Setting the Picture Controls . . . . . . . . . . . . . . . .29
Selecting a Time Zone and Setting the Daylight
Savings Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Selecting a Digital Processing Option . . . . . . . . . . . . . . . . .30
Using Installation Features: Language and Autoprogram . . .67
Selecting a Dynamic Contrast Option . . . . . . . . . . . . . . . .31
ADDITIONAL INFORMATION
Selecting a DNR (Dynamic Noise Reduction) Option . . . .32
Cleaning the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Turning on Color Enhancement . . . . . . . . . . . . . . . . . . . . .33
Cleaning or Replacing the Filters . . . . . . . . . . . . . . . . . . . .69
Selecting an AutoPicture™ Option . . . . . . . . . . . . . . . . . .34
Replacing the Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . .70–71
Selecting a Picture Format Option . . . . . . . . . . . . . . . .35–36
Resetting the Lamp’s Lifetime Counter . . . . . . . . . . . . . . .72
SOUND
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73-74
Adjusting the TV and Headphone Volume . . . . . . . . . . . . .37
Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Selecting a TV Equalizer Option . . . . . . . . . . . . . . . . . . . . .38
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
Adjusting TV Speaker Balance . . . . . . . . . . . . . . . . . . . . . .39
Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77-79
Turning Loudness on or off . . . . . . . . . . . . . . . . . . . . . . . .40
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Selecting a Sound Mode Option . . . . . . . . . . . . . . . . . . . .41
Using Alternate Audio (SAP) . . . . . . . . . . . . . . . . . . . . . . .42
4
Features
Autoprogramming
The TV’s Autoprogram feature searches (when activated) for all
available channels from regular antenna or cable signals and
stores active broadcast stations in the TV’s memory.
Compact design with low weight
The unique Philips single-panel liquid-crystal-on-silicon (LCOS)
technology allows for a large screen TV with a very low depth
and low weight. This TV will find a place in any living room
without occupying a large area, and it can be easily handled by
two persons.
Surf Button
Philips Auto Surf™ allows you to easily switch between only the
channels that are of interest to you. Surf allows two-channel
surfing or nine-channel surfing.
Philips Single-panel LCOS Imaging System
The Philips single-panel LCOS technology produces unmatched
high-resolution and flicker-free video with superb brightness.
This technology enables a large-screen-size TV with low weight
and shallow depth without any concerns for convergence or
image retention.
PixelPlus™
PixelPlus™ creates near high-definition (HD) performance
inside the TV on the basis of a regular input signal. By doubling
the number of lines and the number of pixels per line,
PixelPlus™ enhances both regular broadcasts and DVD input for
unparalleled sharpness and depth.
Items Included with This TV
As you unpack your TV, please note the included items:
• Quick Use and Setup Guide to help you set up your new TV.
• Directions for Use manual—contains information on safety,
set maintenance, Factory Service Center locations, and product warranty
• Warranty Registration Card
• Remote Control (with supplied batteries).
Please take a few minutes to complete your registration card.
The serial number for the TV is on the rear of the set. For
your future reference, please write down the serial and
model number of this television in the space provided on the
warranty page at the back of this manual. (In the unlikely
event you should need to place a service call, these numbers
will be needed.)
Digital Natural Motion™
Digital Natural Motion™ offers razor-sharp reproduction of
movement and motion. Its unique and highly advanced processing calculates motion trajectories of moving picture elements. It
corrects jerky movement from both studio programs or movie
material.
ActiveControl™ Plus
Active Control™ Plus automatically analyzes the incoming signals from the Tuner, AV1, AV2, and Side video inputs 50 times
per second and adjusts key picture settings. In addition to measuring picture noise, this feature uses an ambient light sensor to
adjust the picture settings according to viewing conditions in the
room.
End-of-Life Disposal
Dolby* Virtual Surround
Dolby processing circuitry provides an enhanced cinema surround sound effect without the need for rear speakers.
Your new television and its packing contain materials that can
be recycled and reused. Specialized companies can recycle
your product to increase the amount of reusable materials and
minimize the amounts that need to be properly disposed of.
Your product also uses batteries that should not be thrown
away when depleted, but should be handed in and disposed of
as small chemical waste.
When you replace your existing equipment, please find out
about the local regulations regarding disposal of your old television, batteries, and packing materials.
Double-window,Two-Tuner PIP
Your TV features double-window, two-tuner PIP with second
tuner double window. The TV also has single PIP (free positioning), as well as threefold and sixfold side PIPs. In addition, you
get photo finish, freeze Main, and freeze PIP. Replay lets you
play back the previous few seconds in a PIP screen—if you
missed the action, replay it as much as you want.
Audio/Video (A/V) Jack Panel
The A/V jack panel allows direct connections with VCRs,
DVDs, high-definition receivers, or other devices, providing
quality TV picture and sound playback.
As an Energy Star® Partner, Philips Consumer
Electronics has determined this product meets the
Energy Star® guidelines for energy efficiency.
Energy Star® is a U.S. registered mark. Using products with the
Energy Star® label can save energy. Saving energy reduces air pollution and lowers utility bills.
Audio Volume Leveler (AVL) Control
AVL keeps the TV sound at an even level. Peaks and valleys that
occur at commercial breaks or during program changes are
reduced, providing a more consistent, comfortable sound.
*Manufactured under license from Dolby Laboratories. “Dolby” and
the double-D symbol are trademarks of Dolby Laboratories.
V-Chip (with Channel Lock)
The V-Chip feature (with Channel Lock) will allow you to block
the viewing of channels or programs with certain ratings, and thus
prevent your children from watching inappropriate materials.
Active Control, AutoPicture, AutoSound, AutoSurf, Cineos, Digital
Crystal Clear, Digital Natural Motion, and Pixel Plus are trademarks
of Philips Consumer Electronics. Copyright 2004 Philips Consumer
Electronics. All rights reserved.
5
Ways TV Signals Can Come to Your Home
Over the Air
TV
Antenna
at Your
Home
Analog Digital
Signal Signal
Satellites
Satellite TV
Company
Satellite
Home Satellite Dish
Satellite
Receiver
at Your
Home
Telephone Line
For Direct Connection
to Your TV or to a
Cable Box,VCR, or
Satellite Receiver
Cable TV
Company
Cable
Cable TV Signal (Analog)
Your High-definition-ready Set
DVD619
DVD/CD PLAYER
OPEN/CLOSE
STOP
PLAY
PAUSE
STANDBY-ON
GUIDE
POWER
PREV
NEXT
POWER
SELECT
INFO
HIGH DEFINITION
High-definition television offers a picture with unprecedented crispness and clarity. The TV broadcast industry is moving toward high definition as
the signal standard. Currently, the number of programs being broadcast in high definition is limited, but this is changing. To view high-definition programs on
your TV, you will need to connect a satellite receiver, cable box, or set-top box that can decode HD signals.
Resolution information
Image resolutions are commonly referred to by a number followed by a letter: 480i, 480p, 720p and 1080i.
The number in each format refers to the number of lines
of resolution, so for example both 480i and 480p offer
480 lines of resolution. The "i" or "p" refers to whether
the signal is displayed using respectively interlaced or
progressive scan. Interlaced scan breaks each frame of
video into 2 fields, one made up of even lines and one
made up of odd lines. The image is reproduced by drawing all odd lines first (1,3,5,…479) than all the even
ones (2,4,6,….,480). Progressive scan, on the other hand
reproduces an image by drawing all lines in succession
1,2,3,4,….480).
Interlaced Scan
Odd lines
6
Progressive Scan
Even Lines
Lines in succession
Descriptions of Jacks, Cables, and Connectors
Tuner (RF) Input Jack
Cables used: RF coaxial cable (75Ω)
This page contains descriptions and illustrations of jacks, cables,
and connectors you might use in making connections. The cables
and connectors are not supplied with your TV, but you can purchase at your electronics dealer. Or you can order them by calling
our Customer Care Center at 1-800-531-0039.
Antenna RF Jack
Cable Used: RF
Coaxial (75Ω)
Allows you to connect an antenna, cable TV,
or components having RF outputs to the
antenna input on the TV. RF coaxial cables
are available in push-on or screw-on type.
TUNER
Push-on
Or Screw-on
Type Cable
Type Cable
DVI-D Input Jack
Cable used: DVI-D
DVI-D Jack
Cables Used: DVI-D
This jack works only with DVI TMDS
(Transition Minimized Differential Signaling)
digital video. Allows encrypted transmissions
of uncompressed digital content. The DVI-D
jack used in this product is not for computer
connections.
Component Video Input Jacks
Cables used: component video with
RCA-type phono plugs
Allow you to connect accessory devices such
as DVD players. Separating the video into
three signals, these inputs provide excellent
quality. Be sure to connect the left and right
audio cables, because the Y, Pb, Pr jacks
receive only the picture signal.
NOTE: See the “Helpful Hint” on page 13
for more information.
Signal Splitter
DVI
Component Video Jacks
Cables Used: Component
Video with RCA-type
Phono Plugs
S-Video Input Jacks
Cable used: S-Video
Pr
Allows you to connect equipment with RGB
or VGA output.
Video (called “CVBS” or “composite”)
Input Jacks
Cable used:Video with RCA-type
phono plugs
Provide better picture performance than the
antenna RF input. Be sure to connect the audio
cables, because the video jacks receive only the
picture signal.
Pb
300- to 75-ohm Twin-lead Adapter
Accepts twin-lead wires from an antenna and
allows connection to the antenna input on the
TV. If your antenna is already equipped with
an RF coaxial cable you will not need this
adapter.
Y
300- to 75-ohm
Twin-lead Adapter
TUNER
Audio Input Jacks
Cables used:Audio with RCA-type phono
plugs
S-VIDEO Jack
Cable Used: S-Video
Provide a higher quality picture than the
Video (composite) jacks because the color
part of the picture is separated from the black
and white portion. Be sure to connect the left
and right audio cables, because the S-Video
jacks receive only the picture signal.
RGB+HV Input Jack
Cable used: HD DB15
Signal Splitter
Cables Used: RF
Coaxial (75Ω)
Allows you to route an antenna or cable TV
signal to two inputs.
Provide sound for the video inputs. If your accessory device has only one output for audio, connect
it to the left (color coded white) audio jack on the
TV.
G S-VIDEO
Audio Jacks
Cables Used:
Audio with RCAtype Phono Plugs
R
L
Your TV also has monitor output (“MON OUT”)
audio (“L” and “R”) jacks and a subwoofer output
(“SUB OUT”) jack. Use an audio cable with RCAtype phone plugs to make connections.
VGA/HD15 Jack
Cable Used: HD DB15
3.5mm Stereo Mini Phone
Plug to RCA Jack Adapter
Allows a connection between the
3.5mm stereo audio out jack on a computer and the left and right audio inputs
on the television. Connect A/V cables
with RCA-type phono plugs to the
adapter, then to the TV.
RGB+HV
Video (Composite) Jack
Cable Used:Video with
RCA-type Phono Plugs
V
Your TV also has a monitor output (“MON
OUT”) video (“V”) jack. Use a video cable with
RCA-type phone plugs to make connections.
7
3.5mm Stereo Mini Phone Plug
to RCA Jack Adapter
4
5
6
7
8
9
R
L
Pr
Pb
Y
R
L
V
L
AV5 Input Connectors
Signals accepted: NTSC (480i), 480p, 720p, 1080i,
and VGA plus audio left and right.
Inputs available: RGB+HV. For sound, connections must be made to the AV5 audio inputs.
AV6 Input Connectors
Signals accepted: Digital only (TMDS [Transition
Minimized Differential Signaling] encoded, uncompressed); DVI 480i, 480p, 720p, and 1080i, plus
audio left and right.
Inputs available: DVI TMDS, plus audio. For
sound, connections must be made to the AV6 audio
inputs.
Intended use of the input: digital set-top boxes and
inputs from other digital video devices.
NOTE: This DVI jack is not for computer connections. VGA cannot be connected.
R
L
8
S-VIDEO
AV5
G
RGB+HV
R
L
Pr
Pb
Y
Pr
Pb
Y
STANDARD/
HD INPUTS
TUNER
R
L
STANDARD/
HD INPUTS
7
10
Jack Panel Located
on the Left Side of
the TV
AV3 Input Jacks
Signals accepted: NTSC (480i), 480p, 720p, and
1080i, plus audio left and right.
Inputs available: YPbPr, plus audio. For sound,
connections must be made to the AV3 audio inputs.
TUNER Input Jack
Signals accepted: RF modulated NTSC.
Inputs available: 75Ω RF coaxial.
L
V
SUB OUT Output Jack
Provides a signal to an external powered subwoofer.
AV4 Input Jacks
Signals accepted: NTSC (480i), 480p, 720p, and
1080i, plus audio left and right.
Inputs available: YPbPr, plus audio. For sound,
connections must be made to the AV4 audio inputs.
R
AV2
R
V
AV6
AV1
MON
OUT
S-VIDEO
SUB OUT
3
AV 2 Input Jacks
Signals accepted: NTSC (480i).
Inputs available: S-Video (Y/C) and CVBS, plus
audio left and right.
Use only one of the video signal inputs at a time.
If you should forget and have both types of signal
connected, the set will automatically show the
S-Video, since it is of better quality than CVBS. For
sound, connections must be made to the AV2 audio
inputs.
9
DVI
G
AV3
2
MON OUT Output Jacks
Provide video and audio output signals from all TV
when those sources are being viewed on the main
screen. Output from the audio L/R jacks is at a fixed
volume level; changing the TV volume does not
affect them. Adjust the volume at your external
home cinema system.
1
2
3
4
5
6
AV4
1
AV 1 Input Jacks
Signals accepted: NTSC (480i).
Inputs available: YPbPr, S-Video (Y/C), and
CVBS, plus audio left and right.
Use only one of the video signal inputs at a time.
If you should forget and have more than one type of
signal connected, the set will automatically show the
one of better quality: CVBS—good, S-Video—better, and YPbPr—best. For sound, connections must
be made to the AV1 audio inputs.
SERVICE 12C
Panel Jack Compatibility Information
Definitions:
NTSC—National Television System Committee.
CVBS—labeled “V,” provides a small step up in quality from the Tuner (RF) input. Called
Composite Video.
S-Video (Y/C)—provides better picture quality than CVBS. Separates the signal into color and
brightness.
YPbPr—provides the best quality video signal. Called Component Video Input, the signal is
split into three parts, two color and one brightness.
10
SIDE JACK PANEL
Signals accepted: NTSC (480i).
Inputs available: S-Video (Y/C)
and CVBS, plus audio left and
right.
Output available: Headphone.
Only one of the inputs can be used
at a time. Select the Side source,
and the TV detects the input to
which you have connected.
Connections must be made to the
audio inputs for sound.
8
Pre-connection Recommendations
Positioning the TV
Before connecting accessory devices—VCR,
DVD player, or HD satellite receiver, for example—please keep the following in mind:
• Place the TV on a flat surface. An unlevel surface may adversely affect picture performance.
• Do not place the TV on shag carpet or any
surface that will block the ventilation openings at the bottom of the set. Blockage will
cause the TV to overheat and shut down.
• Allow 4 to 6 inches of space behind the TV
for ventilation.
• An optional swivel and an optional stand are
available for use with your TV. See your electronics dealer.
• Test various locations in the room to find the
optimal spot to locate the set for best viewing.
• Do not place the TV in direct sunlight or near
a heating appliance.
• Do not expose the TV to rain or moisture.
• To prevent any unsafe situations, do not place
objects on top of the TV.
Providing Protection Against Power
Surges
• Connect all accessory devices before you
plug any of their power cords into the wall
outlet or power strip. NEVER plug your TV
into an outlet that is controlled by a wall
switch.
• Turn off the TV and/or accessory devices
before you connect or disconnect any cables.
• Ensure that all antennas and cables are properly grounded. See page 3, “Important Safety
Instructions.”
Situate the TV where
it will not be exposed
to heat or moisture.
For safety, do not
set objects on top
of the TV.
Allow 4 to 6 inches behind the TV
for ventilation.
Place the TV on
a flat surface.
Do not place the TV on a surface that will block
the air filters located underneath the set.
Protecting Accessory Devices from
Overheating
• Arrange accessory devices so that air can circulate freely around them.
• Don’t stack the accessory devices. Arrange
them to allow for good ventilation. The
optional Philips stand provides enough room
for two accessory devices, side by side.
• If you connect an audio receiver or amplifier,
place it on the top shelf so the heated air from
it will not flow around other components.
Connecting Cables
Optional Swivel
Optional Stand
DVD619
DVD/CD PLAYER
OPEN/CLOSE
STOP
PLAY
PAUSE
STANDBY-ON
Be sure to insert each cable firmly into the correct jack.
GUIDE
POWER
PREV
POWER
SELECT
INFO
HIGH DEFINITION
Using the Connection Examples in
This Manual
The accessory device jack panels shown are for
example purpose only. The jack panels on your
accessory devices may look different. Also, note
that connections can be made in various ways.
The examples are presented only as guides.
9
NEXT
Connecting a VCR
SERVICE 12C
Back of TV
DVI
Using a coaxial cable, connect to the
OUT jack on the back of the VCR and
to the TUNER jack on the back of the
TV.
S-VIDEO
R
L
V
Pr
Pb
Y
R
L
V
L
3
R
L
R
L
Incoming Cable TV
or Antenna Signal
V
AV2
R
AV6
AV1
G
MON
OUT
1
2
Connect the incoming antenna or cable
TV signal to the ANT IN jack on the
back of the VCR.
4
5
6
AV5
S-VIDEO
AV3
SUB OUT
RGB+HV
R
L
R
L
Pr
Pb
Y
Pr
Pb
Y
Press the Source (AV+) button on the
remote control to access the Source
list.
STANDARD/
HD INPUTS
AUDIO
L
ANT
OUT
IN
OUT
R
VIDEO
IN
OUT
Press the Cursor Up or Down button to
select the AV2 input source.
Source
TV
AV1:Other
AV2:Other
AV3:Other
AV4:Other
AV5:Other
AV6:Other
SIDE:Other
OK
Press the OK button to confirm your
choice. The set is now switched to the
AV2 input source for the viewing of programs from the VCR.
NOTE: Since you’ve connected the
cable TV signal directly to the TV’s
tuner (step 2 above), you can watch the
unscrambled programs by simply tuning to the desired channel. To store
channels in the TV’s memory, you
must use Autoprogram, which you can
access through “Install” in the TV’s
on-screen menu. See the Autoprogram
section in the Quick Use and Setup
Guide that came with the TV. If you
use Autoprogram, you can select channels by pressing the CH + or – buttons
on the TV remote control (in TV
mode). Otherwise, you must press the
digit (number) buttons to tune directly
to the channel you desire.
2
STANDARD/
HD INPUTS
TUNER
AV4
3
G
Using A/V cables, connect from the
AUDIO and VIDEO OUT jacks on the
back of the VCR to the corresponding
AV2 audio (L and R) and video (V)
jacks on the back of the TV.
INFO
6
SELECT
PIXEL PLUS
SURR
CC
TV
HD
SCREEN
FORMAT
SURF
®
®
®
®
PIP
5
MUTE
4
AV+
ACTIVE
SAP
HELPFUL HINT
Color Coding Used on Jacks and Plugs to
simplify connections:
Yellow: Video (Composite Video)
Red: Right Audio
White: Left Audio.
10
CONTROL
CLOCK
5
IN CH3 CH4
Back of VCR
(example only)
1
Connecting a VCR and Cable Box
2
SERVICE 12C
Incoming
Cable TV
Signal
1
DVI
MON
OUT
Connect the incoming cable TV signal
to a two-way signal splitter. The signal
splitter enables you to route the cable
signal to the TV without using the
OUT TO TV jack on the cable box,
which will not pass stereo sound to the
TV.
S-VIDEO
R
L
V
Pr
Pb
Y
R
L
V
L
Signal
Splitter
5
R
L
R
L
V
AV2
R
AV6
G
S-VIDEO
AV5
G
AV3
SUB OUT
RGB+HV
R
L
R
L
AV4
1
Back of TV
AV1
NOTE: A cable box with AUDIO OUT jacks
such as the one used in the example on this
page might pass stereo sound to the TV. Check
with your cable TV company. The RF jack output jack on a cable box (commonly labeled
“OUT TO TV,” “OUTPUT,” or “OUT”) will
not pass stereo sound to your TV.
Using a coaxial cable, connect to one
of the connectors on the signal splitter
and to the TUNER jack on the back of
the TV.
2
Pr
Pb
Y
Pr
Pb
Y
STANDARD/
HD INPUTS
STANDARD/
HD INPUTS
4
TUNER
AUDIO
L
ANT
OUT
IN
OUT
R
VIDEO
IN
3
4
Using a coaxial cable, connect to the
other connector on the signal splitter
and to the CABLE IN jack on the back
of the cable box.
OUT
Back of VCR
(example only)
Source
TV
AV1:Other
AV2:Other
AV3:Other
AV4:Other
AV5:Other
AV6:Other
SIDE:Other
OK
Using Audio/Video cables, connect to
the AUDIO and VIDEO OUT jacks on
the back of the cable box and to the
corresponding AUDIO and VIDEO IN
jacks on the back of the VCR.
OUTPUT
CH
3
CABLE
IN
5
3
Using Audio/Video cables, connect to
the AUDIO and VIDEO OUT jacks on
the back of the VCR and to the corresponding AV2 audio (L and R) and
video (V) input jacks on the back of
the TV.
INFO
8
SELECT
Press the Source (AV+) button on the
remote control to access the Source
list.
Press the Cursor Up or Down button to
select the AV2 input source.
Press the OK button to confirm your
choice. The set is now switched to the
AV2 input source for the viewing of programs from the cable box or the VCR.
PIXEL PLUS
SURR
CC
TV
HD
SCREEN
FORMAT
SURF
TO
TV
4
VIDEO
OUT
R
AUDIO
OUT
L
Back of Cable Box (example only)
7
®
®
®
6
7
8
IN CH3 CH4
®
PIP
7
MUTE
6
AV+
ACTIVE
SAP
HELPFUL HINT
Color Coding Used on Jacks and Plugs to
simplify connections:
Yellow: Video (Composite Video)
Red: Right Audio
White: Left Audio.
11
CONTROL
CLOCK
NOTE: Since you’ve connected the
cable TV signal directly to the TV’s
tuner (step 2 above), you can watch
the unscrambled programs by simply tuning to the desired channel. To
store channels in the TV’s memory,
you must use Autoprogram, which
you can access through “Install” in
the TV’s on-screen menu. See the
Autoprogram section in the Quick
Use and Setup Guide that came with
the TV. If you use Autoprogram,
you can select channels by pressing
the CH + or – buttons on the TV
remote control (in TV mode).
Otherwise, you must press the digit
(number) buttons to tune directly to
the channel you desire.
Connecting an S-Video Device
SERVICE 12C
DVI
Using Stereo Audio cables, connect to
the AUDIO OUT jacks on the back of
the
S-Video device and to the corresponding AV2 audio inputs (L and R).
2
R
L
V
Pr
Pb
Y
R
L
V
R
L
R
L
R
L
V
S-VIDEO
AV5
G
RGB+HV
SUB OUT
Press the Source (AV+) button on the
remote control to access the Source
list.
AV3
1
R
L
R
L
Pr
Pb
Y
Pr
Pb
Y
STANDARD/
HD INPUTS
TUNER
AV4
3
4
5
S-VIDEO
AV6
AV1
G
MON
OUT
2
Back of TV
AV2
1
Using an S-Video cable, connect to the
S-Video output on the back of the
S-Video device and to the AV2 SVIDEO input.
Press the Cursor Up or Down button to
select the AV2 input source.
Press the OK button to confirm your
choice. The set is now switched to the
AV2 input source for the viewing of
programs from the S-Video device.
Source
TV
AV1:Other
AV2:Other
AV3:Other
AV4:Other
AV5:Other
AV6:Other
SIDE:Other
OK
HELPFUL HINT
To simplify making connections, the connectors on audio and video cables are often color
coded to match the colors on TV jacks, red for
right, and white for left.
INFO
5
SELECT
PIXEL PLUS
SURR
CC
TV
HD
SCREEN
FORMAT
SURF
®
®
®
®
PIP
4
MUTE
3
AV+
ACTIVE
SAP
12
CONTROL
CLOCK
4
STANDARD/
HD INPUTS
S-VIDEO
OUT
L
R
AUDIO OUT
VIDEO
OUT
ANT/CABLE
IN
Back of Standard S-Video Device
(example only)
Connecting a Standard DVD Player
SERVICE 12C
2
DVI
Using Stereo Audio cables, connect to
the AUDIO OUT jacks on the back of
the DVD player and to the corresponding AV1 audio (L and R) jacks on the
back of the TV.
R
L
Pr
Pb
Y
R
L
V
R
L
V
1
R
L
R
L
V
S-VIDEO
AV5
G
RGB+HV
AV3
SUB OUT
Press the Source (AV+) button on the
remote control to access the Source
list.
R
L
R
L
Pr
Pb
Y
Pr
Pb
Y
STANDARD/
HD INPUTS
TUNER
AV4
3
4
5
S-VIDEO
AV6
AV1
G
MON
OUT
2
Back of TV
AV2
1
Using Audio/Video cables, connect to
the YPbPr jacks on the back of the
standard DVD player and to the AV1
YPbPr jacks on the back of the TV.
Press the Cursor Up or Down button to
select the AV1 input source.
Press the OK button to confirm your
choice. The set is now switched to the
AV1 input source for the viewing of programs from the DVD player.
DIGITAL AUDIO OUT
1
PCM-MPEG2-Dolby Digital-DTS
1
2
2
L
R
COAXIAL
Source
HELPFUL HINTS
• If you do not know whether your DVD
player is standard or progressive scan, you
can connect it to either AV3 or AV4, and the
TV will automatically determine the type of
output.
• To simplify making connections, the connectors on audio and video cables are often
color coded to match the colors on TV
jacks: green for Y, blue for Pb, and red for
Pr; also red for right audio, and white for
left audio.
• The names for the component video jacks
may differ depending on the DVD player or
accessory digital source equipment used.
For example, besides YPbPr, you may see
R-Y/B-Y/Y; or CrCbY. Although abbreviations and terms may vary, the letters B and
R stand for the blue and red color component signal connectors, respectively, and Y
indicates the luminance signal. If necessary,
refer to the user manual for your DVD or
digital accessory for more information.
• If you experience difficulties receiving
sound with a DVD disc, check the sound
settings through the DVD disc’s menu.
STANDARD/
HD INPUTS
OK
INFO
SELECT
PIXEL PLUS
SURR
CC
TV
5
TV
AV1:Other
AV2:Other
AV3:Other
AV4:Other
AV5:Other
AV6:Other
SIDE:Other
HD
SCREEN
FORMAT
SURF
®
®
®
®
PIP
4
MUTE
3
AV+
ACTIVE
SAP
13
CONTROL
CLOCK
4
OPT OUT
SUB WF OUT
AUDIO OUT
(CVBS)
VIDEO OUT
PR/CR
PB/CB
VIDEO OUT
Y
(Y/C)
S-VIDEO OUT
Back of Standard DVD Player
(example only)
DVD619
DVD/CD PLAYER
OPEN/CLOSE
STOP
PLAY
PAUSE
STANDBY-ON
PREV
NEXT
Connecting a Progressive-scan DVD Player
4
5
6
If your DVD player has an I/P switch
on the back, be sure it is set to the “P”
position for progressive-scan mode.
NOTE: Some DVD players have an
I/P switch on the back, while others
may allow the user to change the mode
by pressing a button on the DVD player’s remote control or by using the
DVD player’s on-screen menu. Also,
some DVD players have dedicated progressive-scan output jacks that are
labeled as such and require no switching by the user. See the user manual for
your DVD player for more information
on placing the player in progressivescan mode.
SERVICE 12C
R
L
V
Pr
Pb
Y
R
L
V
L
R
L
R
L
V
AV2
R
AV6
AV1
MON
OUT
Using Stereo Audio cables, connect to
the AUDIO OUT jacks on the back of
the DVD player and to the corresponding AV3 or AV4 audio (L and R) jacks
on the back of the TV.
S-VIDEO
G
1
AV5
2
S-VIDEO
RGB+HV
SUB OUT
3
DVI
G
AV3
2
Back of TV
R
L
R
L
Pr
Pb
Y
Pr
Pb
Y
STANDARD/
HD INPUTS
TUNER
AV4
1
Using Audio/Video cables, connect to
the YPbPr jacks on the back of the progressive-scan DVD player and to the
AV3 or AV4 YPbPr jacks on the back of
the TV.
STANDARD/
HD INPUTS
VIDEO OUT
AUDIO OUT
2CH
BITSTREAM
/PCM
Y
AC IN ~
VIDEO
L
PB
R
PR
SELECT
S
OPTICAL
COAXIAL
DIGITAL
P
I
3
Back of Progressivescan DVD Player
(example only)
DVD619
DVD/CD PLAYER
OPEN/CLOSE
STOP
PLAY
PAUSE
STANDBY-ON
PREV
Source
OK
Press the Source (AV+) button on the
remote control to access the Source
list.
NEXT
--AV2:Other
AV3:Other
AV4:Other
AV5:Other
AV6:Other
SIDE:Other
Press the Cursor Up or Down button to
select the AV3 input source.
Press the OK button to confirm your
choice. The set is now switched to the
AV3 input source for the viewing of programs from the DVD player.
INFO
6
SELECT
PIXEL PLUS
SURR
CC
TV
HD
SCREEN
FORMAT
SURF
®
®
®
®
PIP
5
HELPFUL HINT
Inputs AV3–AV6 allow horizontal and vertical
picture panning using the Cursor Left, Right,
Up, and Down buttons. The Side input allows
vertical picture panning; left and right panning
with the Side input is possible when the input
has been labeled “Game.” See pages 18 and 19
for details on side panel connections and
source labeling.
MUTE
4
AV+
ACTIVE
SAP
14
CONTROL
CLOCK
5
HELPFUL HINTS
• To simplify making connections, the connectors on audio and video cables are often
color coded to match the colors on TV
jacks: green for Y, blue for Pb, and red for
Pr; also red for right audio, and white for
left audio.
• The names for the component video jacks
may differ depending on the DVD player or
accessory digital source equipment used.
For example, besides YPbPr, you may see
R-Y/B-Y/Y; or CrCbY. Although abbreviations and terms may vary, the letters B and
R stand for the blue and red color component signal connectors, respectively, and Y
indicates the luminance signal. If necessary,
refer to the user manual for your DVD or
digital accessory for more information.
• If you experience difficulties receiving
sound with a DVD disc, check the sound
settings through the DVD disc’s menu.
Connecting an HD Satellite Receiver to YPbPr
4
5
6
SERVICE 12C
L
V
Pr
Pb
Y
R
L
V
R
L
R
L
V
L
AV2
R
AV6
AV1
R
MON
OUT
Using Stereo Audio cables, connect to
the AUDIO OUT jacks on the back of
the HD satellite receiver and to the corresponding AV3 or AV4 audio (L and
R) jacks on the back of the TV.
S-VIDEO
S-VIDEO
AV5
G
2
Refer to the user manual for the HD
satellite receiver to complete the connections to the HD satellite receiver
and to use the HD satellite receiver’s
on-screen setup menus.
RGB+HV
SUB OUT
3
DVI
G
R
AV3
2
Back of TV
L
Pr
Pb
Y
Pr
Pb
Y
STANDARD/
HD INPUTS
1
TUNER
AV4
1
Using Component Video cables, connect to the YPbPr jacks on the back of
the HD satellite receiver and to the corresponding AV3 or AV4 YPbPr jacks
on the back of the TV.
After completing HD satellite receiver
connections and setup through the onscreen setup menus, press the Source
(AV+) button on the TV remote to
access the Source list.
R
L
AUDIO
AUDIO
STANDARD/
HD INPUTS
Y
L
L
PB
R
R
OUT TO TV
VCR
CONTROL
CH 3
CH 4
DIGITAL
AUDIO OUT
RF
PR
PHONE JACK
REMOTE
VIDEO
VIDEO
IN FROM ANT
S-VIDEO
Press the Cursor Up or Down button to
select the AV4 input source.
Press the OK button to confirm your
choice. The set is now switched to the
AV4 input source for the viewing of programs from the HD satellite receiver.
Source
OK
SATELLITE IN
Back of HD
Satellite Receiver
(example only)
___
AV3:Other
AV4:Other
AV5:Other
AV6:Other
SIDE:Other
GUIDE
POWER
POWER
SELECT
INFO
HIGH DEFINITION
HELPFUL HINTS
• To simplify making connections, the connectors on audio and video cables are often
color coded to match the colors on TV
jacks: green for Y, blue for Pb, and red for
Pr; also red for right audio, and white for
left audio.
• The names for the component video jacks
may differ depending on the DVD player or
accessory digital source equipment used.
For example, besides YPbPr, you may see
R-Y/B-Y/Y; or CrCbY. Although abbreviations and terms may vary, the letters B and
R stand for the blue and red color component signal connectors, respectively, and Y
indicates the luminance signal. If necessary,
refer to the user manual for your DVD or
digital accessory for more information.
• Inputs AV3–AV6 allow horizontal and vertical picture panning using the Cursor Left,
Right, Up, and Down buttons. The Side
input allows vertical picture panning; left
and right panning with the Side input is possible when the input has been labeled
“Game.” See pages 18 and 19 for details on
side panel connections and source labeling.
3
al
Manu
for
e
it
ll
te
a
HD S iver
Rece
User
INFO
PIXEL PLUS
SURR
CC
TV
6
SELECT
HD
FORMAT
®
®
®
®
PIP
5
MUTE
4
AV+
ACTIVE
SAP
15
5
SCREEN
SURF
CONTROL
CLOCK
Connecting an HD Satellite Receiver to DVI
SERVICE 12C
1
DVI
Using Stereo Audio cables, connect to
the AUDIO OUT jacks on the back of
the HD satellite receiver and to the
corresponding AV6 audio (L and R)
jacks on the back of the TV.
R
L
V
Pr
Pb
Y
R
L
V
R
L
L
R
L
V
S-VIDEO
RGB+HV
AV3
SUB OUT
Refer to the user manual for the HD
satellite receiver to complete the connections to the HD satellite receiver
and to use the HD satellite receiver’s
on-screen setup menus.
R
L
R
L
Pr
Pb
Y
Pr
Pb
Y
STANDARD/
HD INPUTS
AV4
TUNER
After completing HD satellite receiver
connections and setup through the onscreen setup menus, press the Source
(AV+) button on the TV remote to
access the Source list.
STANDARD/
HD INPUTS
DOLBY
COMPONENT DIGITAL
OUT
(COAXIAL)
VIDEO OUT
1
AIR IN
2
®
ACCESS CARD
RESOLUTION SELECT
1080i
720p 480p/i
DVI/HDCP OUT
RGB OUT
DTV OUTPUT SELECT
DVI RGB/Y PB PR
CH
3
4
L1
L2
PB
R1
R2
PR
VCR
CONTROL
DOLBY
DIGITAL OUT
(OPTICAL)
Source
S-VIDEO
--AV5:Other
AV6:Other
SIDE:Other
OK
HELPFUL HINTS
3
al
Manu
for
ite
ll
te
a
HD S iver
Rece
User
INFO
6
SELECT
PIXEL PLUS
SURR
CC
TV
HD
5
SCREEN
FORMAT
SURF
®
®
®
®
PIP
5
MUTE
4
AV+
ACTIVE
SAP
16
CONTROL
CLOCK
7H74
AUDIO/VIDEO PRODUCT
TEL LINE
Rt
Back of HD Satellite Receiver
(example only)
Press the OK button to confirm your
choice. The set is now switched to the
AV6 input source for the viewing of
programs from the HD satellite receiver.
LISTED
E207602
Lt
AUDIO
TV OUT
Press the Cursor Up or Down button to
select the AV6 input source.
• To simplify making connections, the connectors on audio cables are often color
coded to match the colors on TV jacks: red
for right audio, and white for left audio.
• Because DVI is such new technology, the
electronics industry is still working
toward a decision on one standard.
Philips testing has determined that compatibility issues exist with respect to a
limited number of high-definition
receivers when they are connected to the
DVI input on this television. If you
should experience difficulties, please
contact our Customer Care Center at 1800-531-0039.
• Inputs AV3–AV6 allow horizontal and vertical picture panning using the Cursor Left,
Right, Up, and Down buttons. The Side
input allows vertical picture panning; left
and right panning with the Side input is
possible when the input has been labeled
“Game.” See pages 18 and 19 for details on
side panel connections and source labeling.
UL
Y
SATELLITE IN
CABLE IN
5
6
R
AUDIO OUT
4
2
AV5
G
3
S-VIDEO
AV6
AV1
G
MON
OUT
2
Back of TV
AV2
1
Using a DVI cable, connect to the DVI
jack on the back of the HD satellite
receiver and to the corresponding AV6
DVI jack on the back of the TV.
Connecting Surround Sound Equipment
SERVICE 12C
DVI
S-VIDEO
R
L
V
Pr
Pb
Y
R
L
V
AV6
G
AV1
2
Using an Audio cable, connect to the
SUB OUT jack on the back of the TV
and to the Audio Input jack on the
back of a powered subwoofer.
Back of TV
MON
OUT
1
Using Stereo Audio cables, connect to
the MON OUT L and R jacks on the
back of the TV and to the corresponding TV IN jacks on the back of the
receiver.
R
L
R
L
L
V
AV2
R
S-VIDEO
AV5
G
AV3
SUB OUT
RGB+HV
3
Using speaker wires, connect to the R
and L Front Speakers terminals and to
the corresponding terminals on the
backs of the front speakers.
4
Using speaker wires, connect to the
Surround Speakers terminals (+, –) on
the back of the receiver and to the corresponding terminals (+, –) on the back
of the surround speakers.
R
L
R
L
Pr
Pb
Y
Pr
Pb
Y
STANDARD/
HD INPUTS
TUNER
SERVICE 12C
AV4
STANDARD/
HD INPUTS
DVI
MON
OUT
Pb
Y
R
L
V
AV6
L
R
L
V
AV2
L
R
AV5
G S-VIDEO
RGB+HV
SUB OUT
Powered
Subwoofer
AV3
Audio
Input
180
R
L
Pr
Pb
Y
Pr
Pb
Y
STANDARD/
HD INPUTS
TUNER
Phase
0
4
Press the Cursor Down button to select
“Settings.”
Press the Cursor Down button repeatedly until “Subwoofer” is selected.
V
Pr
R
Press the Menu button on the remote
control to display the on-screen menu.
Press the Cursor Right button to select
“General.”
L
AV4
5
6
7
8
9
AV1
G S-VIDEO
R
R
L
STANDARD/
HD INPUTS
Surround (Back)
Speakers
Front
Speakers
+
-
+
4
-
3
Press the Cursor Right or Left button
to select “Yes.”
NOTE: “Yes” must be activated for the
Subwoofer menu selection before the
SUB OUT jack will supply output. This
is because the subwoofer’s low frequencies are redirected to the main TV
speakers when “No” is selected.
1
Back of Receiver
(example only)
General
Settings
General
Daylight saving
Settings
Change PIN
Daylight saving
No • Yes
Subwoofer
Change PIN
Lamp rating
Subwoofer
Lamp replaced
Yes • No
Lamp rating
Lamp replaced
INFO
69
8
SELECT
HD
SCREEN
FORMAT
SURF
7
9
HELPFUL HINT
®
®
®
®
PIP
MUTE
17
PIXEL PLUS
SURR
CC
TV
5
To simplify making connections,
the connectors on audio cables are
often color coded to match the colors on TV jacks: red for right audio,
and white for left audio.
Connecting to the Side Inputs:Video Game System
1
Using the Audio/Video cable supplied
with your video game system, connect
to the back of the game system and to
the corresponding S-VIDEO and
AUDIO (L and R) jacks in the Side
panel of the TV.
Panel on
Side of
TV
NOTE: If your game system cable
does not have an S-Video plug, you
can instead make a regular Video
connection.
2
3
4
1
Press the Source (AV+) button on the
TV remote control to access the Source
list.
Press the Cursor Up or Down button to
select the Side input source.
Press the OK button to confirm your
choice. The set is now switched to the
Side input source for the viewing of
your video game system.
You can label the Side Audio/Video
input source “Game” if you would like.
See page 19 for details on labeling.
HELPFUL HINTS
Source
• To simplify making connections, the connectors on audio and video cables are
often color coded to match the colors on
TV jacks: yellow for video (composite),
red for right audio, and white for left
audio.
• Inputs AV3–AV6 allow horizontal and vertical picture panning using the Cursor Left,
Right, Up, and Down buttons. The Side
input allows vertical picture panning; left
and right panning with the Side input is
possible when the input has been labeled
“Game.” See page 19 for details on source
labeling.
--AV6:Other
SIDE:Other
OK
Back of Game System
(example only)
INFO
4
SELECT
PIXEL PLUS
SURR
CC
TV
HD
SCREEN
FORMAT
SURF
3
®
®
®
®
PIP
3
MUTE
2
AV+
ACTIVE
SAP
CONTROL
18
CLOCK
The side panel is also
convenient for connecting equipment
such as camcorders or
cameras. If the equipment has an S-Video
output jack, it is the
Camcorder
suggested one to use
for your connection to receive the best picture. Otherwise, you can make a regular
Video connection. You must also make an
audio connection (L and R for stereo or L for
mono) to receive sound. Neither an S-Video
or Video cable carries a sound signal.
Labeling the Audio/Video Input Sources
You can label all the external Audio/Video
input sources—AV1, AV2, AV3, AV4, AV5,
AV6, and Side—according to the type of
accessory device you have connected to each
input.
Picture Sound Features Channels
TV
Settings
Demo
TV
Install
Settings
After labeling, you can use the Source button
to cycle through and select your desired
source. The labels will appear alongside the
channel indicator when you select the AV
input sources.
General
Clock
Demo
Install
Source
1
2
3
4
5
6
7
8
Settings
Press the Menu button on the remote
control to display the on-screen menu.
AV1
AV2
AV3
Press the Cursor Down button to select
“Settings.”
AV4
INFO
6
Press the Cursor Right button repeatedly to select the “Source” menu.
SELECT
SURR
CC
TV
PIXEL PLUS
HD
SCREEN
FORMAT
SURF
®
Press the Cursor Down button repeatedly to select any of the AV Inputs—
AV1, AV2, AV3, AV4, AV5, AV6, or
Side. A list of labels will appear next to
the selected AV input.
3
5
Source
Settings
AV1
AV2
AV3
AV4
®
®
®
PIP
2
4
6
Press the Cursor Right button to enter
the list.
Press the Cursor Up or Down button to
scroll and select one of the labels in the
list.
1
7
MUTE
--Other
Source
Settings
AV1
--Other
AV+
Press the Menu button on the remote
control to remove the on-screen menu
from the TV screen.
ACTIVE
SAP
CONTROL
CLOCK
8
Press the Source (AV+) button on the
remote control to display the list of AV
inputs and their labels.
Source
Settings
AV1
8
This is just a sample of what the
labeling might look like. Your
Source Labels will depend on the
options you choose to label the
AV inputs.
Source
19
OK
TV
AV1:DVD
AV2:Recorder
AV3:SAT
AV4:HD
AV5:Other
AV6:HD
SIDE:Camera
--Cable
DVD
SAT
Recorder
---
Source
Remote Control Buttons
Select (CBL VCR DVD SAT AMP) and Backlight
Press this button to cycle across the accessory mode dial. Stop pressing
when the mode you desire is lighted. The light will stay on for 2 seconds
and then begin blinking to indicate the remote is in your desired mode.
As long as the button blinks, the remote is in the accessory mode. (See
pages 22–25 for programming the remote) Pressing and holding the
Select button for 2 seconds backlights the remote control buttons. The
buttons remain lighted for 5 seconds after you press Select.
Information Plus
Press to show information (when available) about the current channel,
program, source, number or name, local time, CC availability, SAP availability, program ratings, display format, sound mode, and remaining
length of a Sleeptimer setting.
INFO
SELECT
SURR
CC
TV
PIXEL PLUS
HD
SCREEN
TV
Press to directly set the TV into the TV mode of operation.
FORMAT
SURF
®
CC (Closed Captioning)
Press to turn Closed Captioning off, on, or on during mute. (See page 47
in the Directions for Use manual.)
®
®
®
Surf
If you set the Surf control in the TV’s on-screen menu to two channels,
this button will allow you to toggle between the current channel and the
last viewed channel. If you choose the nine-channel Surf, pressing this button allows you to add and scroll up to nine of your favorite channels. See
page 57 in the Directions for Use manual.
PIP
MUTE
OK
Press to activate or confirm menu choices.
Dual Screen/PIP (Picture-in-Picture)
Press to turn the PIP dual screen on or off. Continuing to hold the Dual
Screen/PIP button down will cycle through the Dual Screen/PIP options.
(See page 58 in the Directions for Use manual.)
AV+
VOL (Volume)
Press + or – to adjust the volume.
ACTIVE
SAP
Mute
Press to interrupt or restore sound.
CONTROL
CLOCK
Source (AV+)
Press to display a list of source options—TV, AV1, AV2, AV3, AV4, AV5,
AV6, or Side. Use the Cursor Up/Down buttons to select the next item,
then press the OK button to confirm or press the Source (AV+) Select
button to select the next item in the list.
Alternate Audio (SAP)
When you tune to a channel where SAP (Second Audio Program) is
available, you can toggle between Main and SAP. If SAP is not available,
only Main can be selected. (See page 42 in the Directions for Use manual.)
Active Control™ Plus
NOTE: Active Control™ Plus is not available for use with the AV3,
AV4, AV5, and AV6 input sources.
Press to toggle the options Off, Minimum, Medium, and Maximum.
Maximum is the recommended option. See page 28 in the Directions for
Use manual.
Active Control, AutoSurf, Incredible Surround, and Pixel Plus are trademarks of Philips Consumer Electronics. Copyright 2004 Philips Consumer Electronics. All
rights reserved.
*Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
20
Remote Control Buttons
Standby–On
Press to turn the TV on or off.
NOTE: The TV is never powered off completely unless it is physically
unplugged from the power source.
INFO
SELECT
SURR
CC
TV
PIXEL PLUS
HD
SCREEN
FORMAT
SURF
®
®
®
®
HD
Press to activate the AV6 (High Definition) jacks and place the TV in the
High Definition Mode of operation.
Screen Format
Press to display a list of available picture formats for showing video
images in the traditional 4:3 proportions. Press this button repeatedly to
select a picture format. Choose from Automatic, Super zoom, Panoramic,
4:3, Movie expand 14:9, Movie expand 16:9, 16:9 subtitle, and Wide
screen. See pages 35–36 in the Directions for Use manual.
NOTES:
• With AV3–AV6 connections, the Automatic picture
format option is not available.
• In Dual Screen mode, press the Screen Format button to switch
between a full or 4:3 letterbox picture format.
MUTE
AV+
ACTIVE
CONTROL
VCR/DVD Functions
When the remote is in the VCR mode, these buttons will allow you start
a recording (●), rewind a tape (), stop the playback of a tape (■),
play a videotape (), or fast-forward a videotape ().
Surround Sound
Press to display a list of available sound modes. Choose from Incredible
Surround™ and Dolby* Virtual settings. (See page 41)
PIP
SAP
Pixel Plus™ Demo
Press to activate the demo, which illustrates the benefits of Pixel Plus™.
Press again to turn the demo off. Press and the TV screen will be divided
in half displaying the Pixel Plus™ Demo. The left side will show the picture with Pixel Plus™ switched off. The right side of the screen will
show the picture with Pixel Plus™ switched on. (See page 30 in the
Directions for Use manual.)
CLOCK
Cursor Up, Down, Right, Left
Use to navigate the on-screen menu and make control adjustments or settings.
Additionally, use these buttons to pan the screen up or down to show any
excluded parts of the picture.
Menu On/Off
Press to display the TV’s on-screen menu or to turn it off.
CH (Channel Selection)
Press to browse through the TV channels.
Digit (Number Buttons)
Press to directly access a specific TV channel. For a two- or three-digit
channel, enter all numbers. Press a single- digit button and hold a bit
longer to directly access a single-digit channel. These buttons can also be
used to enter values in certain on-screen menu controls.
Time Display (Clock)
Press to display the current time on the TV screen. (See page 64 in the
Directions for Use manual to set the clock)
21
Programming the Remote Control
Your TV remote control can operate accessory devices such as cable boxes, VCRs, DVD
players, satellite receivers, and amplifiers.
Normally, the remote is in TV mode. You
must press the Select button to switch the
remote to one of the accessory modes—CBL,
VCR, DVD, SAT, or AMP.
AMP
It is likely you will need to program you
remote, but, before you do, try this test:
GUIDE
POWER
POWER
SELECT
INFO
HIGH DEFINITION
• Press the Select button repeatedly until the
mode you desire lights up. When the light
begins blinking, point the remote toward
the accessory device, then press the
Standby–On button. If the device responds
you do not need to program the remote. If
not, follow the steps below to program the
remote.
1
2
3
SAT
DVD619
DVD/CD PLAYER
OPEN/CLOSE
STOP
PLAY
PAUSE
STANDBY-ON
PREV
DVD
Look up the number for the device on
the list below:
1 Cable (CBL)
2 VCR
3 DVD
4 Satellite (SAT)
5 Amplifier (AMP).
Look up the number for the manufacturer on pages 24–25.
VCR
CBL
Press the Select and Standby–On buttons at the same time, then release.
2
Press the number for the device followed by the manufacturers code. The
green Standby-On light will blink,
indicating the code is valid. If the light
does not blink, start again at step 1
using another code (if available).
INFO
2
SELECT
PIXEL PLUS
SURR
CC
TV
HD
SCREEN
FORMAT
SURF
®
®
®
®
PIP
MUTE
3
AV+
ACTIVE
SAP
22
CONTROL
CLOCK
NEXT
Programming the Remote Control
Now try to use the remote control with the
accessory device to see if it is correctly programmed.
4
Press the Select button on the remote
to select the type of device. When the
mode you desire lights up, stop pressing the button. When the light begins
blinking the remote is ready for use
with the device.
5
Press the Standby–On button. As long
as the light keeps blinking, you can use
the remote with the selected device.
Once the light disappears, the remote
is back in TV mode.
DVD619
DVD/CD PLAYER
OPEN/CLOSE
STOP
PLAY
PAUSE
STANDBY-ON
PREV
NEXT
5
INFO
SELECT
4
HD
SCREEN
FORMAT
SURF
®
®
®
If the device does not respond to the
Standby–On command, repeat steps 16 using a different code. If there are no
other for the type and brand of accessory device, the remote likely will not
operate your particular model of accessory device.
PIXEL PLUS
SURR
CC
TV
®
PIP
MUTE
AV+
NOTE: Your TV remote is not necessarily
capable of operating all models of the brands
of accessory devices listed on pages 24–25.
You may want to try the programming
process again. Try using the number(s) that
are listed for your type and brand of device to
be sure you did not make a mistake in
inputting the digits during your first attempt
at programming.
ACTIVE
SAP
CONTROL
CLOCK
c CHECK IT OUT
You can change the duration of the time-out
mode by simultaneously pressing the Select
button and a digit button, 1–4. Using digit 1
will set the time-out to 15 seconds; digit 2, 30
seconds; digit 3, 60 seconds; and digit 4, 120
seconds. The default time-out setting after
you replace the batteries in the remote is 60
seconds. All modes will have the same timeout setting.
HELPFUL HINT
If the remote control is in one of the accessory modes (a mode light is flashing)—
CBL, VCR, DVD, SAT, AMP—and you
don’t press any of the remote buttons for
sixty seconds, a “time-out” occurs, returning
the remote to TV mode.
23
Programming the Remote Control: Setup Codes
Amplifier
Carver . . . . . . . . . . . . . . . . . . . . . . . . . . .0296
Curtis Mathes . . . . . . . . . . . . . . . . . . . . .0327
GE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0105
JVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0358
Linn . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0296
Magnavox . . . . . . . . . . . . . . . . . . . . . . . .0296
Marantz . . . . . . . . . . . . . . . . . . . . . . . . . .0296
Optimus . . . . . . . . . . . . . . . . . . . . .0422, 0327
Philips . . . . . . . . . . . . . . . . . . . . . . . . . . .0296
Pioneer . . . . . . . . . . . . . . . . . . . . . . . . . .0327
Polk Audio . . . . . . . . . . . . . . . . . . . . . . . .0296
RCA . . . . . . . . . . . . . . . . . . . . . . . . . . . .0327
Realistic . . . . . . . . . . . . . . . . . . . . . . . . .0422
Sony . . . . . . . . . . . . . . . . . . . . . . .0716, 0247
Soundesign . . . . . . . . . . . . . . . . . . . . . . .0105
Victor . . . . . . . . . . . . . . . . . . . . . . . . . . . .0358
Wards . . . . . . . . . . . . . . . . . . . . . . . . . . .0105
Yamaha . . . . . . . . . . . . . . . . . . . . . . . . . .0381
Cable Box
ABC . . . . . . . . . . . . . . . . . . .0030, 0034, 0035
Allegro . . . . . . . . . . . . . . . . . . . . . .0180, 0342
Americast . . . . . . . . . . . . . . . . . . . . . . . .0926
Archer . . . . . . . . . . . . . . . . . . . . . .0180, 0824
BellSouth . . . . . . . . . . . . . . . . . . . . . . . . .0926
Century . . . . . . . . . . . . . . . . . . . . . . . . . .0180
Citizen . . . . . . . . . . . . . . . . . . . . . .0180, 0342
Comtronics . . . . . . . . . . . . . . . . . . . . . . .0067
Contec . . . . . . . . . . . . . . . . . . . . . . . . . .0046
Emerson . . . . . . . . . . . . . . . . . . . . . . . . .0824
Everquest . . . . . . . . . . . . . . . . . . .0042, 0067
Focus . . . . . . . . . . . . . . . . . . . . . . . . . . .0427
Garrard . . . . . . . . . . . . . . . . . . . . . . . . . .0180
Gemini . . . . . . . . . . . . . . . . . . . . . . . . . .0042
General Instrument . . . . . . . . . . . .0503, 0837
GoldStar . . . . . . . . . . . . . . . . . . . .0067, 0171
Goodmind . . . . . . . . . . . . . . . . . . . . . . . .0824
Hamlin . . . . . . . . . . . .0047, 0036, 0286, 0061
Hytex . . . . . . . . . . . . . . . . . . . . . . . . . . . .0034
Jasco . . . . . . . . . . . . . . . . . .0042, 0180, 0342
Jerrold . . . . . . . . . . . .0030, 0039, 0503, 0042,
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0837
Memorex . . . . . . . . . . . . . . . . . . . . . . . . .0027
Motorola . . . . . . . . . . . . . . . . . . . . . . . . .1133
Movie Time . . . . . . . . . . . . . . . . . . . . . . .0090
NSC . . . . . . . . . . . . . . . . . . . . . . . . . . . .0090
Oak . . . . . . . . . . . . . . . . . . . . . . . .0046, 0034
Optimus . . . . . . . . . . . . . . . . . . . . . . . . . .0048
Panasonic . . . . . . . . . . . . . .0048, 0134, 0027
Paragon . . . . . . . . . . . . . . . . . . . . . . . . .0027
Philips . . . . . . . . . . . . . . . . .0180, 0332, 0344
Pioneer . . . . . . . . . . . . . . . .0171, 0560, 0904
Popular Mechanics . . . . . . . . . . . . . . . . .0427
Pulsar . . . . . . . . . . . . . . . . . . . . . . . . . . .0027
Quasar . . . . . . . . . . . . . . . . . . . . . . . . . .0027
RCA . . . . . . . . . . . . . . . . . . . . . . . . . . . .0048
Radio Shack . . . . . . . .0042, 0910, 0342, 0824
Recoton . . . . . . . . . . . . . . . . . . . . . . . . . .0427
Regal . . . . . . . . . . . . . . . . . . . . . . .0047, 0286
Runco . . . . . . . . . . . . . . . . . . . . . . . . . . .0027
SL Marx . . . . . . . . . . . . . . . . . . . . . . . . . .0067
Samsung . . . . . . . . . . . . . . . . . . . .0067, 0171
Scientific Atlanta . . . . . . . . . .0035, 0504, 0904
Signal . . . . . . . . . . . . . . . . . . . . . .0042, 0067
Sprucer . . . . . . . . . . . . . . . . . . . . . . . . . .0048
Starcom . . . . . . . . . . . . . . . . . . . . .0030, 0042
Stargate . . . . . . . . . . . . . . . .0067, 0042, 0824
Starquest . . . . . . . . . . . . . . . . . . . . . . . . .0042
TV86 . . . . . . . . . . . . . . . . . . . . . . . . . . . .0090
Teleview . . . . . . . . . . . . . . . . . . . . . . . . .0067
Tocom . . . . . . . . . . . . . . . . . . . . . . . . . . .0039
Toshiba . . . . . . . . . . . . . . . . . . . . . . . . . .0027
Tusa . . . . . . . . . . . . . . . . . . . . . . . . . . . .0042
Unika . . . . . . . . . . . . . . . . . . . . . . . . . . . .0180
United Artists . . . . . . . . . . . . . . . . . . . . . .0034
Universal . . . . . . . . . . . . . . . . . . . .0180, 0218
Viewstar . . . . . . . . . . . . . . . . . . . . . . . . .0090
Zenith . . . . . . . . . . . . . . . . . .0027, 0552, 0926
Zentek . . . . . . . . . . . . . . . . . . . . . . . . . . .0427
Surround Sound Receiver
ADC . . . . . . . . . . . . . . . . . . . . . . . . . . . .0558
Aiwa . . . . . . . . . . . . . . . . . . . . . . . . . . . .0148
Capetronic . . . . . . . . . . . . . . . . . . . . . . . .0558
Carver . . . . . . . . . . . . . . . . .0069, 1116, 1216
Casio . . . . . . . . . . . . . . . . . . . . . . . . . . . .0222
Clarinette . . . . . . . . . . . . . . . . . . . . . . . . .0222
Denon . . . . . . . . . . . . . . . . . . . . . .1187, 1131
Fisher . . . . . . . . . . . . . . . . . . . . . . . . . . .0069
Garrard . . . . . . . . . . . . . . . . . . . . . . . . . .0490
Harman/Kardon . . . . . . . . . . . . . . . . . . . .0137
JVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0101
Kenwood . . . . . . . . . .1054, 0069, 0213, 1340
. . . . . . . . . . . . . . . . . . . . . . . . . . .1596, 1597
Lloyd's . . . . . . . . . . . . . . . . . . . . . . . . . . .0222
MCS . . . . . . . . . . . . . . . . . . . . . . . . . . . .0066
Magnavox . . . . . . . . . .0418, 1116, 0558, 1216
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0222
Marantz . . . . . . . . . . . . . . . .1116, 1216, 0066
Modulaire . . . . . . . . . . . . . . . . . . . . . . . .0222
Nakamichi . . . . . . . . . . . . . . . . . . . . . . . .0124
Onkyo . . . . . . . . . . . . . . . . . . . . . . . . . . .0162
Optimus . . . . . . . . . . .1050, 0213, 0558, 0069
Panasonic . . . . . . . . . . . . . . . . . . .0066, 1545
Penney . . . . . . . . . . . . . . . . . . . . . . . . . .0222
Philips . . . . . . . . . . . . .1116, 1216, 1296, 0418
Pioneer . . . . . . . . . . . . . . . .0177, 0558, 1050
Proscan . . . . . . . . . . . . . . . . . . . . . . . . . .1281
Quasar . . . . . . . . . . . . . . . . . . . . . . . . . .0066
RCA . . . . . . . . . . . . . . . . . . .1281, 0558, 1050
Realistic . . . . . . . . . . . . . . . . . . . . . . . . .0222
Sansui . . . . . . . . . . . . . . . . . . . . . . . . . . .1116
Sharp . . . . . . . . . . . . . . . . . . . . . . . . . . .0213
Sherwood . . . . . . . . . . . . . . . . . . . . . . . .0529
Sony . . . . . . . . . . . . . . . . . .1185, 1085, 1285
Sunfire . . . . . . . . . . . . . . . . . . . . . . . . . .1340
Teac . . . . . . . . . . . . . . . . . . . . . . . . . . . .0490
Technics . . . . . . . . . . .0066, 1335, 1545, 1336
Thorens . . . . . . . . . . . . . . . . . . . . . . . . . .1216
Victor . . . . . . . . . . . . . . . . . . . . . . . . . . . .0101
Yamaha . . . . . . . . . . . . . . . .0203, 0213, 1203
Yorx . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0222
Satellite Receiver
AlphaStar . . . . . . . . . . . . . . . . . . . . . . . .0799
Echostar . . . . . . . . . . . . . . . . . . . .1032, 0802
Expressvu . . . . . . . . . . . . . . . . . . . . . . . .0802
GE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0593
General Instrument . . . . . . . .0388, 0896, 0654
HTS . . . . . . . . . . . . . . . . . . . . . . . . . . . .0802
Hitachi . . . . . . . . . . . . . . . . . . . . . . . . . . .0846
Hughes Network Systems . . . . . . . . . . . .0776
JVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0802
Jerrold . . . . . . . . . . . . . . . . . . . . . .0388, 0654
Magnavox . . . . . . . . . . . . . . . . . . .0749, 0751
Memorex . . . . . . . . . . . . . . . . . . . . . . . . .0751
Next Level . . . . . . . . . . . . . . . . . . . . . . . .0896
Panasonic . . . . . . . . . . . . . . . . . . . . . . . .0728
Philips . . . . . . . . . . . . . . . . .1103, 0749, 0751
Primestar . . . . . . . . . . . . . . . . . . . .0654, 0388
24
RCA . . . . . . . . . . . . .0593, 0170, 0419, 0882
Radio Shack . . . . . . . . . . . . . . . . . . . . . .0896
Samsung . . . . . . . . . . . . . . . . . . . . . . . . .1136
Sony . . . . . . . . . . . . . . . . . . . . . . . . . . . .0666
Star Choice . . . . . . . . . . . . . . . . . . . . . . .0896
Toshiba . . . . . . . . . . . . . . . . . . . . .0776, 0817
Uniden . . . . . . . . . . . . . . . . . . . . . .0751, 0749
Zenith . . . . . . . . . . . . . . . . . . . . . . . . . . .0883
VCR
Admiral . . . . . . . . . . . . . . . . . . . . .0075, 0236
Adventura . . . . . . . . . . . . . . . . . . . . . . . .0027
Aiko . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0305
Aiwa . . . . . . . . . . . . . . . . . . . . . . .0027, 0064
Akai . . . . . . . . . . . . . . . . . . . . . . . . . . . .0068
America Action . . . . . . . . . . . . . . . . . . . .0305
American High . . . . . . . . . . . . . . . . . . . .0062
Asha . . . . . . . . . . . . . . . . . . . . . . . . . . . .0267
Audiovox . . . . . . . . . . . . . . . . . . . . . . . . .0064
Beaumark . . . . . . . . . . . . . . . . . . . . . . . .0267
Bell & Howell . . . . . . . . . . . . . . . . . . . . . .0131
Broksonic . . . . .0148, 0211, 0029, 0236, 0506
CCE . . . . . . . . . . . . . . . . . . . . . . .0099, 0305
Calix . . . . . . . . . . . . . . . . . . . . . . . . . . . .0064
Canon . . . . . . . . . . . . . . . . . . . . . . . . . . .0062
Carver . . . . . . . . . . . . . . . . . . . . . . . . . .0108
Cineral . . . . . . . . . . . . . . . . . . . . . . . . . .0305
Citizen . . . . . . . . . . . . . . . . . . . . . .0305, 0064
Colt . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0099
Craig . . . . . . . . .0064, 0099, 0074, 0267, 0298
Curtis Mathes . . . . . . .0062, 0068, 0087, 0189
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0787
Cybernex . . . . . . . . . . . . . . . . . . . . . . . . .0267
Daewoo . . . . . . . . . . . . . . . . . . . . .0305, 0072
Denon . . . . . . . . . . . . . . . . . . . . . . . . . . .0069
Dynatech . . . . . . . . . . . . . . . . . . . . . . . . .0027
Electrohome . . . . . . . . . . . . . . . . . . . . . .0064
Electrophonic . . . . . . . . . . . . . . . . . . . . . .0064
Emerex . . . . . . . . . . . . . . . . . . . . . . . . . .0059
Emerson . . . . . . . . . .0211, 0029, 0236, 0305,
. . . . . . . . . . . . . . . . .0148, 0506, 0027, 0064,
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0070
Fisher . . . . . . . . . . . . . . . . . . . . . .0074, 0131
Fuji . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0062
Funai . . . . . . . . . . . . . . . . . . . . . . . . . . . .0027
GE . . . . . . . . . . . . . . .0062, 0087, 0075, 0267,
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0787
Garrard . . . . . . . . . . . . . . . . . . . . . . . . . .0027
Go Video . . . . . . . . . . . . . . . . . . . .0459, 0553
GoldStar . . . . . . . . . . . . . . . . . . . .0064, 0065
Gradiente . . . . . . . . . . . . . . . . . . . . . . . .0027
HI-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . .0074
Harley Davidson . . . . . . . . . . . . . . . . . . .0027
Harman/Kardon . . . . . . . . . . . . . . .0065, 0108
Harwood . . . . . . . . . . . . . . . . . . . . . . . . .0099
Hitachi . . . . . . . . . . . . . . . . .0069, 0027, 0068
Hughes Network Systems . . . . . . . . . . . .0069
JVC . . . . . . . . . . . . . . . . . . . . . . . .0094, 0068
Jensen . . . . . . . . . . . . . . . . . . . . . . . . . .0068
KEC . . . . . . . . . . . . . . . . . . . . . . . .0064, 0305
KLH . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0099
Kenwood . . . . . . . . . . . . . . .0068, 0094, 0065
Kodak . . . . . . . . . . . . . . . . . . . . . .0062, 0064
LXI . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0064
Lloyd's . . . . . . . . . . . . . . . . . . . . . . . . . . .0027
Logik . . . . . . . . . . . . . . . . . . . . . . . . . . . .0099
MEI . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0062
MGA . . . . . . . . . . . . . . . . . . . . . . .0070, 0267
MGN Technology . . . . . . . . . . . . . . . . . . .0267
MTC . . . . . . . . . . . . . . . . . . . . . . .0027, 0267
Magnasonic . . . . . . . . . . . . . . . . . . . . . . .0305
Magnavox . . . . .0062, 0108, 0027, 0066, 0176
Programming the Remote Control: Setup Codes
VCR (continued)
Magnin . . . . . . . . . . . . . . . . . . . . . . . . . .0267
Marantz . . . . . . . . . . . . . . . . . . . . .0108, 0062
Marta . . . . . . . . . . . . . . . . . . . . . . . . . . . .0064
Matsushita . . . . . . . . . . . . . . . . . . .0062, 0189
Memorex . . . . . . . . . .0131, 0074, 0506, 0027
. . . . . . . . . . . . . . . . . .0064,0075, 0062, 0267
. . . . . . . . . . . . . . . . . .0066, 0189, 0236, 1189
Minolta . . . . . . . . . . . . . . . . . . . . . . . . . .0069
Mitsubishi . . . . . . . . . . . . . . .0070, 0075, 0094
Motorola . . . . . . . . . . . . . . . . . . . .0062, 0075
Multitech . . . . . . . . . . . . . . . . . . . .0027, 0099
NEC . . . . . . . . . . . . . .0065, 0068, 0094, 0131
Nikko . . . . . . . . . . . . . . . . . . . . . . . . . . . .0064
Noblex . . . . . . . . . . . . . . . . . . . . . . . . . . .0267
Olympus . . . . . . . . . . . . . . . . . . . . . . . . .0062
Optimus . . . . . . . . . . .0189, 1189, 0075, 0064,
. . . . . . . . . . . . . . . . . . . . . . . . . . .0131, 0459
Orion . . . . . . . . . . . . .0506, 0029, 0211, 0236
Panasonic . . . . . . . . . .0062, 0189, 1189, 0643
Penney . . . . . . .0062, 0267, 0064, 0069, 0065
Pentax . . . . . . . . . . . . . . . . . . . . . . . . . . .0069
Philco . . . . . . . . . . . . . . . . . .0062, 0236, 0506
Philips . . . . . . . . . . . . . . . . .0108, 0062, 0645
Pilot . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0064
Pioneer . . . . . . . . . . . . . . . . . . . . . . . . . .0094
Polk Audio . . . . . . . . . . . . . . . . . . . . . . . .0108
Profitronic . . . . . . . . . . . . . . . . . . . . . . . .0267
Proscan . . . . . . . . . . . . . . . . . . . . .0087, 0787
Protec . . . . . . . . . . . . . . . . . . . . . . . . . . .0099
Pulsar . . . . . . . . . . . . . . . . . . . . . . . . . . .0066
Quasar . . . . . . . . . . . . . . . . .0062, 0189, 1189
RCA . . . . . . . . . . . . .0087, 0176, 0069, 0062,
. . . . . . . . . . . . . . . . . . . . . .0075, 0267, 0787
Radio Shack . . . . . . . . . . . . . . . . . . . . . .0027
Radix . . . . . . . . . . . . . . . . . . . . . . . . . . . .0064
Randex . . . . . . . . . . . . . . . . . . . . . . . . . .0064
Realistic . . . . . . . . . . .0027, 0131, 0074, 0075,
. . . . . . . . . . . . . . . . . . . . . . . . . . .0064, 0062
ReplayTV . . . . . . . . . . . . . . . . . . . .0641, 0643
Runco . . . . . . . . . . . . . . . . . . . . . . . . . . .0066
STS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0069
Samsung . . . . . . . . . . . . . . . . . . . .0072, 0267
Sanky . . . . . . . . . . . . . . . . . . . . . .0066, 0075
Sansui . . .0068, 0506, 0027, 0094, 0236, 0298
Sanyo . . . . . . . . . . . . . . . . .0074, 0131, 0267
Scott . . . . . . . . . . . . . .0211, 0148, 0070, 0072
Sears . . . . . . . . . . . . .0064, 0069, 0027, 0062,
. . . . . . . . . . . . . . . . . . . . . . . . . . .0074, 0131
Semp . . . . . . . . . . . . . . . . . . . . . . . . . . .0072
Sharp . . . . . . . . . . . . . . . . . . . . . . . . . . .0075
Shintom . . . . . . . . . . . . . . . . . . . . . . . . . .0099
Shogun . . . . . . . . . . . . . . . . . . . . . . . . . .0267
Singer . . . . . . . . . . . . . . . . . . . . . . . . . . .0099
Sony . . . . . . . . . . . . . .0059, 0027, 0062, 0063
Sylvania . . . . . . . . . . .0062, 0108, 0027, 0070
Symphonic . . . . . . . . . . . . . . . . . . . . . . .0027
TMK . . . . . . . . . . . . . . . . . . . . . . . . . . . .0267
Tatung . . . . . . . . . . . . . . . . . . . . . . . . . . .0068
Teac . . . . . . . . . . . . . . . . . . . . . . .0027, 0068
Technics . . . . . . . . . . . . . . . . . . . .0062, 0189
Teknika . . . . . . . . . . . . . . . .0027, 0062, 0064
Thomas . . . . . . . . . . . . . . . . . . . . . . . . . .0027
Tivo . . . . . . . . . . . . . . . . . . . . . . . .0645, 0663
Toshiba . . . . . . . . . . . . . . . . . . . . .0072, 0070
Totevision . . . . . . . . . . . . . . . . . . .0064, 0267
Unitech . . . . . . . . . . . . . . . . . . . . . . . . . .0267
Vector . . . . . . . . . . . . . . . . . . . . . . . . . . .0072
Vector Research . . . . . . . . . . . . . . . . . . .0065
Video Concepts . . . . . . . . . . . . . . . . . . . .0072
Videosonic . . . . . . . . . . . . . . . . . . . . . . . .0267
Wards . . . . . . . . . . . .0062, 0087, 0027, 0074,
. . . . . . . . . . . . . . . . .0267, 0069, 0075, 0099
. . . . . . . . . . . . . . . . . . . . . .0108, 0176, 0787
White Westinghouse . . . . . . .0099, 0305, 0236
25
XR-1000 . . . . . . . . . . . . . . . .0099, 0027, 0062
Yamaha . . . . . . . . . . . . . . . . . . . . . . . . . .0065
Zenith . . . . . . . . . . . . .0066, 0027, 0236, 0506
Digital Video Disc (DVD)
Apex . . . . . . . . . . . . . . . . . . . . . . . . . . . .0699
Denon . . . . . . . . . . . . . . . . . . . . . . . . . . .0517
Fisher . . . . . . . . . . . . . . . . . . . . . . . . . . .0697
GE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0549
Hitachi . . . . . . . . . . . . . . . . . . . . . . . . . . .0691
Hiteker . . . . . . . . . . . . . . . . . . . . . . . . . .0699
JVC . . . . . . . . . . . . . . . . . . . . . . . .0650, 0585
Kenwood . . . . . . . . . . . . . . . . . . . .0709, 0561
Konka . . . . . . . . . . . . .0746, 0738, 0747, 0748
Magnavox . . . . . . . . . . . . . . . . . . .0530, 0702
Marantz . . . . . . . . . . . . . . . . . . . . . . . . . .0566
Mitsubishi . . . . . . . . . . . . . . . . . . . . . . . .0548
Onkyo . . . . . . . . . . . . . . . . . . . . . . . . . . .0530
Optimus . . . . . . . . . . . . . . . . . . . . . . . . . .0598
Oritron . . . . . . . . . . . . . . . . . . . . . . . . . . .0678
Panasonic . . . . . . . . . . . . . . . . . . .0517, 0659
Philips . . . . . . . . . . . . . . . . . . . . . .0566, 0530
Pioneer . . . . . . . . . . . . . . . .0598, 0552, 0659
Proscan . . . . . . . . . . . . . . . . . . . . . . . . . .0549
RCA . . . . . . . . . . . . . . . . . . . . . . .0549, 0598
Samsung . . . . . . . . . . . . . . . . . . . . . . . . .0600
Sharp . . . . . . . . . . . . . . . . . . . . . . . . . . .0657
Sony . . . . . . . . . . . . . . . . . . . . . . . . . . . .0560
Technics . . . . . . . . . . . . . . . . . . . . . . . . .0517
Theta Digita . . . . . . . . . . . . . . . . . . . . . . .0598
Toshiba . . . . . . . . . . . . . . . . . . . . . . . . . .0530
Yamaha . . . . . . . . . . . . . . . . . . . . .0517, 0572
Zenith . . . . . . . . . . . . . . . . . . . . . .0618, 0530
Operating Accessory Devices with the TV Remote
Once you have programmed your TV remote,
refer to page 27 to see how the remote functions with accessory devices.
GUIDE
POWER
POWER
SELECT
INFO
HIGH DEFINITION
Before the remote will operate an accessory
device, you must select the correct mode:
CBL (cable box), VCR, DVD, SAT (satellite),
or AMP (amplifier).
1
Press the Select button to cycle through
the accessory modes. When the mode
you want lights up, stop pressing the
button. After a few seconds, the light
will begin blinking. The blinking
means that the remote is in the accessory mode you have selected.
2
INFO
NOTE: The remote is in accessory
mode as long as the light keeps blinking. If you do not use the remote for
60 seconds the light will switch off,
and the TV will go back to TV mode.
The 60-second timer restarts each time
you use the remote in an accessory
mode.
2
PIXEL PLUS
SURR
CC
TV
1
SELECT
HD
SCREEN
FORMAT
SURF
Point the front of the remote
toward the front of the
accessory device, then press
the necessary buttons to perform the functions you
desire. Refer to pages 27 to
see the functions of the buttons in the respective accessory modes.
®
®
®
®
PIP
MUTE
Point the front of the remote toward
the front of the accessory device, then
press the button to perform the desired
function.
AV+
ACTIVE
SAP
HELPFUL HINT
● Press
the Select button once to return the
remote to the TV mode.
● Press the Select Button twice to select
another device by cycling through the
accessory mode choices.
c CHECK IT OUT
You can change the duration of the time-out
mode by simultaneously pressing the Select
button and a digit button, 1–4. Using digit 1
will set the time-out to 15 seconds; digit 2, 30
seconds; digit 3, 60 seconds; and digit 4, 120
seconds. The default time-out setting after
you replace the batteries in the remote is 60
seconds. All modes will have the same timeout setting.
26
CONTROL
CLOCK
To backlight the
remote control buttons, press and hold
the Select button for
two seconds. If you do not press
any remote buttons for five seconds, the backlight switches off.
Each time you press a remote button while the backlight is on, the
five-second time-out function is
reset. After the backlight switches
off, you must press and hold the
Select button for two seconds to
turn it back on.
Operating Accessory Devices with the TV Remote
VCR Mode
CBL (Cable) & SAT Mode
Power/Standby
Mode Select
Display
Mode Select
Display
INFO
SELECT
Stop
PIXEL PLUS
SURR
CC
TV
HD
SCREEN
FORMAT
SURF
®
Cursor Up,
Down, Right,
Left
Menu
®
PIP
Mute
Previous Track
Nect Track
Digits
MUTE
Rewind
TV
Record
SURF
SELECT
PIXEL PLUS
SURR
CC
HD
SCREEN
Play
Fast Forward
FORMAT
®
OK
®
®
®
PIP
Mute
Menu
Channel Down
MUTE
Volume +, –
Channel Up
Digits
AV+
AV+
Surround
ACTIVE
CLOCK
CONTROL
SAP
DVD Mode
INFO
SELECT
PIXEL PLUS
SURR
CC
TV
HD
SCREEN
FORMAT
SURF
Power/Standby
Pause
Play
Fast Forward
Subtitles
Power/Standby
Mode Select
INFO
Search Down
News
Cursor Up,
Down, Right,
Left
Menu
Volume +, –
®
OK
®
PIP
Mute
Previous Track
Next Track
Digits
MUTE
CLOCK
AMP Mode
®
®
ACTIVE
CONTROL
SAP
*Point remote at TV when using this button.
*Point remote at TV when using this button.
Cursor Up,
Down, Right,
Left
Menu
Volume +, –
Pause
INFO
Cursor Up,
Down, Right,
Left
®
®
Volume +, –
Mode Select
Display
Stop
Rewind
Power/Standby
SELECT
PIXEL PLUS
SURR
CC
TV
HD
SCREEN
FORMAT
SURF
®
®
®
OK
®
PIP
Mute
Channel Down
Channel Up
Digits
MUTE
AV+
Freq. Direct
AV+
ACTIVE
SAP
CONTROL
Search Up
RSD Toggle
ACTIVE
CLOCK
SAP
CONTROL
CLOCK
Surround
*Point remote at TV when using this button.
*Point remote at TV when using this button.
27
Using Active Control™ Plus
Active Control™ Plus monitors incoming
video signals from the Tuner, AV1, AV2, and
Side inputs and adjusts key picture settings
for best picture quality. In addition to measuring picture noise, this feature uses an ambient
light sensor (located on the front of the TV)
to adjust the picture settings according to
viewing conditions in the room. When you
choose to turn Active Control™ Plus on, you
have the options Minimum, Medium, or
Maximum. Maximum is the recommended
option.
Active Control
Off
Minimum
Medium
Maximum
Active Control
NOTE: Active Control™ Plus is disabled
with the AV3–AV6 input sources.
1
2
3
Press the Active Control™ button on
the remote control to display the
“Active Control” menu.
Press the Cursor Up or Down button to
select one of the options: “Minimum,”
“Medium,” “Maximum,” or “Off.”
Auto Picture Personal
Dynamic Contrast
Sharpness
DNR
2
4
INFO
SELECT
PIXEL PLUS
SURR
CC
TV
HD
SCREEN
FORMAT
SURF
®
4
2
NOTE: The Active Control™ values
shown in the information window will
based on the current AutoPicture™ setting: Personal, Rich, Natural, Soft,
Multimedia, or Eco.
Press the OK button to return to the
Active Control Menu or the Menu button to remove the on-screen menu from
the TV screen.
INFO+
Active Control : Minimum
3
®
®
Press the Cursor Right button to display the Active Control™ information
window. You will notice how the values constantly change while Active
Control™ is working.
Off
Minimum
Medium
Maximum
®
PIP
4
MUTE
AV+
ACTIVE
SAP
1
HELPFUL HINTS
Active Control™ Plus Settings
Minimum—Sharpness, Dynamic Contrast,
and Noise Reduction are controlled automatically.
Medium—Sharpness, Color, Dynamic
Contrast, and Noise Reduction are controlled automatically.
Maximum—Sharpness, Color, Dynamic
Contrast, Noise Reduction, and Contrast are
controlled automatically.
28
CONTROL
CLOCK
i
10
51
4
Selecting an AutoPicture™ Option
Whether you’re watching a movie or playing
a video game, your TV has automatic video
control settings to match your current program source or content. AutoPicture™ quickly resets your TV’s video controls for a number of different types of programs and viewing conditions that you may have in your
home. The Personal AutoPicture™ settings
are the same as the Picture control adjustments made within the on-screen menu.
1
2
3
4
5
Press the Menu button on the remote to
display the on-screen menu.
6
Press the Menu button to remove the
on-screen menu from the TV screen.
Picture Sound Features Channels
TV
Settings
Picture Sound Features Channels
TV
Demo
Auto Picture
Install
Contrast
Brightness
Color
Picture
TV
Personal
Auto Picture
Rich
Contrast
Natural
Brightness
Soft
--Color
Press the Cursor Right button to select
“Picture.”
Press the Cursor Down button repeatedly until the “Auto picture” control is
selected.
5
INFO
SELECT
SURR
CC
TV
PIXEL PLUS
HD
SCREEN
FORMAT
SURF
®
Press the Cursor Right button to enter
the AutoPicture™ submenu.
2
4
®
®
®
Press the Cursor Down or Up button to
select one of the AutoPicture™
options: “Personal,” “Rich,” “Natural,”
“Soft,” “Multimedia,” or “Eco.”
HELPFUL HINTS
AutoPicture™ Options
Personal settings are based on your personal
choice or viewer control preferences.
Rich emphasizes very vibrant colors. (This is
a good choice when AV mode is used in a
brightly lighted room.)
Natural sets picture controls at mid-level settings for consistent viewing conditions.
Soft emphasizes warm colors. (This is a good
choice for dimly lighted room. It gives a cinema-like effect when the light is switched off.)
NOTE: This option can also be used with the
PixelPlus™ control to soften the appearance
of harsh screen elements that can show with
certain types of DVD playback conditions.
See page 30 for information about
PixelPlus™.
Multimedia emphasizes soft colors. (This is
a good choice for playing computer games,
for example.)
B&W optimizes brightness and contrast settings for viewing black and white programs.
PIP
3
5
1
6
MUTE
Picture
TV
Auto picture
Personal
Rich
Natural
Soft
---
Picture
TV
Personal
Rich
Auto picture
Natural
Soft
Multimedia
Eco
AV+
ACTIVE
SAP
CONTROL
CLOCK
NOTE: The Personal option shows the personal settings made in the
Picture submenu. When you select one of the preset AutoPicture™
options, those settings become the Personal settings.
29
Adjusting/Setting the Picture Controls
To adjust your TV picture controls, select a channel and follow these steps.
Picture Sound Features Channels
TV
1
2
3
Press the Menu button on the remote control to show the on-screen menu.
Settings
5
Contrast
Install
Brightness
Press the Cursor Right button to select
“Picture.”
Color
Sharpness
Press the Cursor Down button to select
one of the picture adjustments: “Contrast,”
“Brightness,” “Color,” “Sharpness,”
“Color temperature,” or “Tint.”
NOTE: The menu will show only four items at a
time, so you will need to continue scrolling with
the Cursor Down button to adjust the color temperature and tint.
4
Picture Sound Features Channels
TV
Demo
Picture
TV
Color
INFO
SELECT
PIXEL PLUS
SURR
CC
TV
Press the Cursor Left or Cursor Right button to adjust the selected control. Or, if
color temperature is chosen, press the
Cursor Right button to choose from the
options “Normal,” “Warm,” or “Cool.”
Press the Menu button to remove the onscreen menu from the TV screen.
HD
SCREEN
FORMAT
SURF
®
2
4
Sharpness
Picture
TV
®
®
4
Normal
Warm
Cool
Color Temperature
®
Digital processing
PIP
Dynamic contrast
3
1
5
MUTE
HELPFUL HINTS
• The tint control is not available with the
AV3 - AV6 input sources.
Picture Control Settings
• Brightness adds or subtracts light from the
darkest part of the picture.
• Color adds or eliminates color.
• Sharpness improves the detail in the picture.
• Tint adjusts the picture to obtain natural
skin tones.
• Color temperature offers “Normal,”
“Cool,” or “Warm” picture preferences.
• Normal keeps whites, white.
• Cool makes whites, bluish.
• Warm makes whites, reddish.
40
Contrast
Brightness
DNR
Picture
TV
Color enhancement
Tint
AV+
Auto picture
ACTIVE
SAP
30
CONTROL
CLOCK
Picture format
40
Selecting a Digital Processing Option
The Digital Processing control gives you a
choice of different picture scanning modes.
Progressive Scan doubles the number of picture lines, eliminating line flicker and providing a jitter-free picture.
Movie Plus provides motion compensation to
increase clarity around moving images in the
picture.
PixelPlus improves the picture quality and
appearance of on-screen images. The number
of picture lines is increased along with the
number of pixels per line, giving normal
broadcast signals, DVD reproduction or
Digital TV signals, unparalleled sharpness
and depth. This gives the viewer near highdefinition and natural-looking detail without
the high-definition signal.
1
2
3
4
5
6
Press the Menu button on the remote to
display the on-screen menu.
Picture Sound Features Channels
TV
Settings
Picture Sound Features Channels
TV
Demo
Contrast
Install
Brightness
Color
Sharpness
Picture
TV
40
Contrast
Brightness
Color
Sharpness
INFO
5
SELECT
SURR
CC
TV
PIXEL PLUS
HD
SCREEN
FORMAT
SURF
®
Press the Cursor Right button to select
“Picture.”
2
4
Picture
TV
®
®
Color Temperature
®
Press the Cursor Down button repeatedly until the “Digital processing” control is selected.
Press the Cursor Right button to enter
the digital processing submenu.
Press the Cursor Up or Down button to
select Progressive Scan, Movie Plus, or
PixelPlus.
Digital processing
PIP
Dynamic contrast
3
5
1
6
MUTE
Progressive Scan
Movie Plus
Pixel Plus
DNR
Picture
TV
Digital processing
Progressive Scan
Movie Plus
Pixel Plus
AV+
ACTIVE
Press the Menu button to remove the onscreen menu from the TV screen.
SAP
CLOCK
CONTROL
OR
Picture
TV
HELPFUL HINT
Digital processing
The Digital Processing control is not available for use with the AV3, AV4, AV5, or
AV6 input sources.
Progressive Scan
Movie Plus
Pixel Plus
OR
When PixelPlus is on, the image is
flicker free and sharper. Motion
appears more natural.
PixelPlus
Demo
Picture
TV
Digital processing
INFO
SELECT
SURR
CC
TV
PIXEL PLUS
Pixel Plus Demo
PIXEL PLUS
HD
SCREEN
Pixel Plus Off
Pixel Plus On
FORMAT
SURF
®
®
®
®
PIP
31
Progressive Scan
Movie Plus
Pixel Plus
Selecting a Dynamic Contrast Option
The Dynamic Contrast control allows you to
sharpen the picture quality by making dark
portions of the picture darker and light portions of the picture more noticeable.
Normally, you will probably want to select
Medium. In certain circumstances, however,
you may prefer Minimum or Maximum.
Picture Sound Features Channels
TV
Settings
Picture Sound Features Channels
TV
Demo
Contrast
Install
Brightness
Color
Sharpness
1
2
3
4
5
6
Press the Menu button on the remote to
display the on-screen menu.
Press the Cursor Right button to select
Picture.
Picture
TV
40
Contrast
Press the Cursor Down button repeatedly until the “Dynamic contrast” control is selected.
Press the Cursor Right button to enter
the Dynamic Contrast submenu.
Brightness
Color
Sharpness
5
INFO
SELECT
SURR
CC
TV
PIXEL PLUS
HD
SCREEN
FORMAT
SURF
®
Press the Cursor Up or Down button to
select one of the Dynamic Contrast
options: “Off,” “Minimum,”
“Medium,” or “Maximum.”
Press the Menu button to remove the
on-screen menu from the TV screen.
Picture
TV
®
®
Color Temperature
Digital processing
®
PIP
Dynamic contrast
3
5
DNR
1
6
MUTE
HELPFUL HINT
The Dynamic Contrast control is not available for use with input sources AV3–AV6.
2
4
Picture
TV
Dynamic contrast
AV+
ACTIVE
SAP
32
CONTROL
CLOCK
Off
Minimum
Medium
Maximum
Off
Minimum
Medium
Maximum
Selecting a DNR (Dynamic Noise Reduction) Option
For many reasons, one of which is poor cable
reception, the picture can sometimes appear
slightly “speckled” (an indication of signal
noise in the picture). The DNR (Dynamic
Noise Reduction) control can help eliminate
this type of interference and improve the
quality of the picture.
Picture Sound Features Channels
TV
Settings
Picture Sound Features Channels
TV
Demo
Contrast
Install
Brightness
Color
Sharpness
1
2
3
4
5
6
Press the Menu button on the remote to
display the on-screen menu.
Press the Cursor Right button to select
“Picture.”
Picture
TV
40
Contrast
Brightness
Press the Cursor Down button repeatedly until the DNR control is selected.
Color
Sharpness
Press the Cursor Right button to enter
the DNR submenu.
5
INFO
SELECT
SURR
CC
TV
PIXEL PLUS
HD
SCREEN
FORMAT
SURF
Press the Cursor Up or Down button to
select one of the DNR options: Off,
Minimum, Medium, or Maximum.
®
2
4
Color temperature
®
®
Digital processing
Dynamic contrast
®
Press the Menu button to remove the
on-screen menu from the TV screen.
HELPFUL HINT
Picture
TV
DNR
PIP
3
5
1
6
MUTE
DNR is not available for use with input
sources AV3–AV6.
Picture
TV
DNR
AV+
ACTIVE
SAP
CONTROL
Off
Minimum
Medium
Maximum
CLOCK
Off
Minimum
Medium
Maximum
Picture
TV
DNR
33
Off
Minimum
Medium
Maximum
Turning on Color Enhancement
The Color Enhancement control can improve
the picture quality of pictures with a high saturation of color. This control works in four
ways:
Dynamic Blue Stretch corrects the white colors toward a more bluish-colored white without changing the other colors. Improves the
sharpness of the picture.
Green Enhancement offers a more saturated
green color in case of low green broadcasts,
giving landscapes a fresher and brighter look.
Color-dependent Sharpness improves the
sharpness of the picture through the color
information. Gives the picture more details,
especially in red colors.
Skin-tone Correction adjusts for over saturation of red that often appears in skin tones.
1
2
3
4
5
Picture Sound Features Channels
TV
Settings
Picture Sound Features Channels
TV
Demo
Contrast
Install
Brightness
Color
Sharpness
Picture
TV
Color
Sharpness
INFO
SELECT
PIXEL PLUS
SURR
CC
TV
Press the Menu button on the remote to
display the on-screen menu.
HD
SCREEN
FORMAT
SURF
®
Press the Cursor Right button to select
“Picture.”
2
4
Picture
TV
®
®
Color enhancement
Auto picture
PIP
Picture format
3
1
5
MUTE
Press the Cursor Right button to turn
the color enhancement control on or
off.
Press the Menu button to remove the
on-screen menu from the TV screen.
On • Off
Tint
®
Press the Cursor Down button repeatedly until the “Color enhancement”
control is selected.
40
Contrast
Brightness
OR
Picture
TV
Color enhancement
Tint
Auto picture
AV+
Picture format
ACTIVE
CONTROL
SAP
HELPFUL HINT
The color enhancement control is not available for use with inputs AV3–AV6.
34
CLOCK
Off • On
Selecting a Picture Format Option
Your TV’s wide screen (16:9 aspect ratio)
delivers a home-cinema experience that isn’t
possible with a conventional (4:3 aspect ratio)
set. The 16:9 format of high-definition (HD)
programs and other widescreen-format video
sources appear more lifelike, dramatic, and
theatrical. Black or gray bars are diminished
or eliminated. As the television industry
moves toward the high-definition format standard and more HD broadcasts become available, you will be able to see the broadcasts as
they were intended—in 16:9 format.
For flexibility in viewing conventional 4:3format video sources on your TV’s wide
screen, you have the options Automatic,”
“Super zoom,” “Panoramic,” “4:3,” “Movie
expand 14:9,” “Movie expand 16:9,” “16:9
subtitle,” or “Wide screen.”
Conventional 4:3 Screen Size
Your TV’s 16:9 Screen Size
Your TV’s Picture Format Options
Automatic (not depicted)
Makes the picture fill the screen
as much as possible when the
presence of black or gray bars is
detected.
NOTE: The Automatic picture format is
disabled for AV3–AV6.
Panoramic
Evenly stretches the edges of the
picture to fill the TV’s wide
screen.
Page 36 explains how to select a picture
format option.
c CHECK IT OUT
Inputs AV3–AV4 allow horizontal and vertical
picture panning using the Cursor Left, Right,
Up, and Down buttons. The Side input allows
vertical picture panning; left and right panning
with the Side input is possible when the input
has been labeled “Game.” See pages 18 and 19
for details on side panel connections and
source labeling.
Super zoom
Removes the black or gray bars
on the sides of a 4:3-format picture with minimal distortion. Part
of the top and bottom portions of
the picture are excluded from the
screen.
Movie expand 14:9
Expands the picture to 14:9 movie
aspect ratio. Part of the top and bottom portions of the picture are
excluded from the screen. Black or
gray bars are shown at the left and
right sides.
HELPFUL HINT
The term aspect ratio refers to the relationship between the width and height of a TV
screen. Historically, TV screen width has
been 33 percent greater than its height,
amounting to a 4:3 aspect ratio. The width
of your widescreen TV, however, is nearly
80 percent greater than its height, which
means its aspect ratio is 16:9. This screen
corresponds well with the tendency of the
eyes to feel more comfortable with fields of
view and action planes that are horizontally
oriented. The wide screen is also proportionally truer to the formats in which
movies are filmed and presented in theaters.
However, many widescreen DVDs will still
display black bars to preserve the true theatrical format.
4:3
Displays a conventional 4:3 picture without change. Black or
gray bars will show at the left and
right sides.
Movie expand 16:9
Alters the image both horizontally (stretched) and vertically
(cropped) to fill the TV’s wide
screen. Part of the top and bottom
portions of the picture will be
excluded from the screen.
35
16:9 subtitle
Zooms the picture for a full view
of subtitles or other information
displayed at the bottom of the
picture. Part of the top portion of
the picture is excluded from the
screen.
Wide screen
Evenly stretches the width of the
picture to fill the screen.
Selecting a Picture Format Option
Choose a picture format size to match the
type of program you’re watching. Select the
normal 4:3 aspect ratio or a variety of
widescreen formats.
1
2
3
4
5
Press the Menu button on the remote to
display the on-screen menu.
Settings
Picture Sound Features Channels
TV
Demo
Contrast
Install
Brightness
Color
Sharpness
Press the Cursor Right button to select
“Picture.”
Press the Cursor Down button repeatedly until the “Picture format” control
is selected.
Picture
TV
40
Contrast
Brightness
Press the Cursor Right button to enter
the picture-format submenu.
Press the Cursor Down button to select
one of the seven screen formats:
“Automatic,” “Super zoom,”
“Panoramic,” “4:3,” “Movie expand
14:9,” “Movie expand 16:9,” “16:9
subtitle,” or “Wide screen.”
The Automatic option senses the presence of black or gray bars around the
picture and zooms the picture to reduce
or eliminate the bars.
NOTE: The Automatic picture format
option is not available with AV5 (computer) connections.
6
7
Picture Sound Features Channels
TV
Press the Menu button to remove the
on-screen menu from the TV screen.
Color
7
INFO
TV
SELECT
PIXEL PLUS
SURR
CC
HD
SCREEN
FORMAT
SURF
®
Sharpness
2
4
Color enhancement
®
®
Picture
TV
Tint
Auto picture
®
PIP
Picture format
3
5
1
6
MUTE
Picture
TV
Picture format
AV+
ACTIVE
CONTROL
SAP
You can also select a screen format
simply by pressing the Screen Format
button on the remote control.
Automatic
Super zoom
Panoramic
---
CLOCK
Automatic
Super zoom
Panoramic
---
Picture
TV
Picture format
36
Automatic
Super zoom
Panoramic
4:3
---
Adjusting the TV and Headphone Volume
Besides the normal volume level control, your
TV also has a headphone volume control.
This control can be adjusted when using
headphones without having to adjust the main
volume control for the TV cabinet speakers.
Television Volume
Headphone Volume
Picture Sound Features Channels
TV
Settings
To control the television volume:
1
2
Demo
Install
40
Press the Volume + button on the
remote control to increase the television volume level.
Press the Volume – button on the
remote control to decrease the television volume level.
Sound Features Channels
TV
Volume
Equalizer
Balance
Loudness
Headphone volume
NOTES:
• The Volume scroll will not appear on
screen if the on-screen display is set to
“Minimum.” See page 62 for details.
• The Volume level can also be adjusted
within the on-screen menu. Select the
Sound menu and cursor down to the
Volume control. Use the Cursor Left and
Right buttons to adjust.
INFO
SELECT
SURR
CC
TV
7
FORMAT
SURF
®
Press the Cursor Right button to select
“Sound.”
Press the Cursor Down button repeatedly until the “Headphone volume”
control is selected.
4
6
®
®
®
PIP
MUTE
3
4
5
6
7
8
HD
SCREEN
To control the Headphone volume:
Press the Menu button on the remote
control to display the on-screen menu.
PIXEL PLUS
1
2
Press the Cursor Right button to
increase the headphone volume level.
Press the Cursor Left button to
decrease the headphone volume level.
Press the Menu button on the remote
control to remove the on-screen menu
from the TV screen.
37
40
Plug your headphones into the headphone 3.5mm mini-jack in the TV’s Side
panel.
ACTIVE
CONTROL
Volume
Equalizer
Balance
Loudness
Headphone volume
5 3
8
AV+
SAP
Sound
TV
CLOCK
Selecting an AutoSound™ Option
AutoSound™ allows you to select from four
factory-set controls and a personal control.
The personal control consists of settings you
adjust through the on-screen Sound menu.
The four factory-set controls—Speech,
Music, Movie, or Multimedia—enable you to
tailor the TV sound to enhance the particular
program you are watching. Follow these steps
to select any of the options.
1
2
3
4
5
6
Picture Sound Features Channels
TV
Settings
Sound Features Channels
TV
Demo
Volume
Equalizer
Balance
Loudness
Headphone volume
Install
Press the Menu button on the remote
to display the on-screen menu.
Picture
TV
AVL
Press the Cursor Right button repeatedly to select “Sound.”
Press the Cursor Down button repeatedly until the “Auto sound” control is
selected.
Delta volume
Auto sound
INFO
5
TV
SELECT
SURR
CC
Press the Cursor Up or Down button to
select an option: “Speech,” “Music,”
“Movies,” “Multimedia,” or
“Personal.”
Press the Menu button to remove the
on-screen menu from the TV screen.
HELPFUL HINTS
AutoSound™ Options
Speech brings voices to the forefront and
emphasizes them. Moves music to the background.
HD
SCREEN
FORMAT
SURF
Press the Cursor Right button to enter
the AutoSound™ submenu.
PIXEL PLUS
®
2
4
Personal
Speech
Music
Movies
Multimedia
Picture
TV
®
®
®
Auto sound
PIP
3
5
1
6
MUTE
Personal
Speech
Music
Movies
Multimedia
AV+
ACTIVE
CONTROL
SAP
CLOCK
Music emphasizes music over voices.
Movies provides a balance between voices
and music.
Multimedia provides sound balance best
suited for gaming consoles or interactive
media.
Personal presents the TV’s sound according
to the settings you make within the sound
menu.
NOTE: The Personal option shows the personal settings made in the
Sound submenu. When you select one of the preset AutoSound™ options,
those settings become the Personal settings.
38
Selecting a TV Equalizer Option
The Equalizer control will change the dynamics of the sound being heard through the TV.
You can adjust the settings for the Personal
Equalizer option. The other options have been
preset at the factory and cannot be changed.
1
2
3
4
5
Picture Sound Features Channels
TV
Settings
Sound Features Channels
TV
Demo
Volume
Equalizer
Balance
Loudness
Headphone volume
Install
Press the Menu button on the remote to
display the on-screen menu.
Press the Cursor Right button repeatedly to select “Sound.”
Sound
Press the Cursor Down button repeatedly until the “Equalizer” control is
selected.
Press the Cursor Right button to enter
the equalizer submenu. Continue to
press the Cursor Right button to select
one of the options: “Speech,” “Music,”
“Movie,” “Multimedia,” or “Personal.”
TV
Equalizer
INFO
SELECT
SURR
CC
TV
HD
SCREEN
5
FORMAT
SURF
®
2
4
5
Sound
TV
®
®
If you select the Personal option and
want to make adjustments, press the
Cursor Down button to select an
adjustment, then press the Cursor Left
or Right button to adjust the slider control to the desired position.
PIXEL PLUS
Equalizer
®
PIP
3
5
1
6
MUTE
NOTE: If you attempt to change the settings
for the factory preset options Speech, Music,
Movie, or Multimedia, the Equalizer control
will default to the Personal option.
Sound
Equalizer
6
ACTIVE
SAP
CONTROL
Auto Sound: Music
120 Hz
500 Hz
1.5 kHz
5 kHz
10 kHz
TV
AV+
Press the Menu button to remove the
on-screen menu from the TV screen.
Auto Sound: Speech
120 Hz
500 Hz
1.5 kHz
5 kHz
10 kHz
CLOCK
Auto Sound: Movie
120 Hz
500 Hz
1.5 kHz
5 kHz
10 kHz
Sound
TV
Equalizer
Auto Sound: Multimedia
120 Hz
500 Hz
1.5 kHz
5 kHz
10 kHz
Sound
TV
Equalizer
39
Auto Sound: Personal
120 Hz
500 Hz
1.5 kHz
5 kHz
10 kHz
Adjusting TV Speaker Balance
You can adjust the balance of the TV speaker
sound.
1
2
3
4
5
Press the Menu button on the remote to
display the on-screen menu.
Picture Sound Features Channels
TV
Settings
Sound Features Channels
TV
Demo
Volume
Equalizer
Balance
Loudness
Headphone volume
Install
Press the Cursor Right button repeatedly to select “Sound.”
Press the Cursor Down button repeatedly until the “Balance” control is
selected.
AV1
Sound
TV
Press the Cursor Right or Left button
to adjust speaker balance.
Volume
Equalizer
Balance
Loudness
Headphone volume
Press the Menu button to remove the
on-screen menu from the TV screen.
INFO
PIXEL PLUS
SURR
CC
TV
4
SELECT
HD
SCREEN
FORMAT
SURF
®
2
4
®
PIP
3
1
5
MUTE
AV+
ACTIVE
SAP
40
CONTROL
CLOCK
Sound
TV
Volume
Equalizer
Balance
Loudness
Headphone volume
®
®
AV1
2
0
Turning Loudness on or off
Turning the Loudness control on provides a
volume-dependent bass-boost effect to the
speakers. Follow the steps here to turn the
Loudness control on.
Picture Sound Features Channels
TV
Settings
Sound Features Channels
Demo
1
2
3
4
5
Press the Menu button on the remote to
display the on-screen menu.
TV
Install
Auto sound
Equalizer
Volume
Balance
Loudness
Headphone volume
Press the Cursor Right button repeatedly to select “Sound.”
Press the Cursor Down button repeatedly until the “Loudness” control is
selected.
Sound
TV
Press the Cursor Right to toggle loudness on or off.
INFO
Press the Menu button to remove the
on-screen menu from the TV screen.
SELECT
SURR
CC
TV
PIXEL PLUS
HD
SCREEN
FORMAT
SURF
®
2
4
®
PIP
3
1
5
MUTE
AV+
ACTIVE
CONTROL
SAP
41
CLOCK
TV
Off • On
Sound
Auto sound
Equalizer
Volume
Balance
Loudness
Headphone volume
®
®
Auto sound
Equalizer
Volume
Balance
Loudness
Headphone volume
On • Off
Selecting a Sound Mode Option
The Sound Mode control allows you to place
the TV sound into either Incredible
Surround™ or Dolby* Virtual mode. The
steps below explain how to select one of
those options.
1
2
3
4
5
Picture Sound Features Channels
TV
Settings
Sound Features Channels
TV
Demo
Volume
Equalizer
Balance
Loudness
Headphone volume
Install
Press the Menu button on the remote to
display the on-screen menu.
Press the Cursor Right button repeatedly to select “Sound.”
Sound
Press the Cursor Down button repeatedly until the “Sound mode” control is
selected.
Press the Cursor Right button to enter
the sound mode submenu.
TV
INFO
5
Dolby Virtual creates a virtualized
surround-sound experience from two
speakers. Dolby Virtual retains all the
original multichannel audio information and provides the listener with the
sensation of being surrounded by additional speakers.
HD
SCREEN
FORMAT
SURF
®
2
4
Off
Incr. Surround
Dolby Virtual
Sound
TV
®
®
Incr. Surround enhances stereo programs by making the sound broader
and fuller.
7
PIXEL PLUS
SURR
CC
TV
Press the Cursor Up or Down button to
select one of modes, either “Incr.
Surround” or “Dolby Virtual.”
SELECT
Sound mode
Alt Audio
Mono/Stereo
Sound mode
®
PIP
3
5
1
6
MUTE
Off
Incr. Surround
Dolby Virtual
Sound
TV
Sound mode
Off
Incr. Surround
Dolby Virtual
AV+
6
7
When finished, press the Menu button
to remove the on-screen menu from the
TV screen.
ACTIVE
CONTROL
SAP
CLOCK
Sound
You can also select a sound mode
option simply by pressing the
Surround Sound button on the remote
control.
TV
Sound mode
*Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
Incredible Surround is a trademark of Philips
Consumer Electronics. Copyright 2004 Philips
Consumer Electronics. All rights reserved.
42
Off
Incr. Surround
Dolby Virtual
Using Alternate Audio (SAP)
For broadcasts that contain SAP (Secondary
Audio Program) information, the Alt Audio
Control can be set to SAP. Sent as a third
audio channel, SAP is an additional part of the
stereo broadcast system that can be heard apart
from the current TV program sound. TV stations are free to use SAP for any number of
purposes.
Picture Sound Features Channels
TV
Settings
Sound Features Channels
TV
Demo
Volume
Equalizer
Balance
Loudness
Headphone volume
Install
If an SAP signal is not present with a selected
program, the “Alt Audio” option in the TV’s
on-screen menu cannot be selected and will
appear grayed out.
Sound
TV
Sound mode
Alt audio
Mono/Stereo
If SAP is available on the tuned channel:
1
2
3
4
5
6
Press the Menu button on the remote to
display the on-screen menu.
INFO
SELECT
SURR
CC
TV
PIXEL PLUS
HD
SCREEN
Press the Cursor Right button repeatedly to select “Sound.”
FORMAT
SURF
®
PIP
3
1
5
MUTE
Press the Menu button to remove the
on-screen menu from the TV screen.
You can also select SAP by simply
pressing the Alternate Audio button on
the remote control.
6
Sound
TV
Sound mode
Alt audio
Mono/Stereo
®
Press the Cursor Right button to toggle
and select either “Main” or “SAP.”
OR
®
®
Press the Cursor Down button repeatedly until the Alt Audio control is
selected.
2
4
Main • SAP
AV+
ACTIVE
CONTROL
SAP
43
CLOCK
SAP • Main
Setting the TV for Stereo Programming
Your TV can output stereo sound. It has both
an amplifier and twin speakers through which
the stereo sound can be heard.
1
2
3
4
Press the Menu button on the remote
to display the on-screen menu.
Picture Sound Features Channels
TV
Settings
Sound Features Channels
TV
Demo
Volume
Equalizer
Balance
Loudness
Headphone volume
Install
Press the Cursor Right button repeatedly to select “Sound.”
Press the Cursor Down button repeatedly until the “Mono/Stereo” control is
selected.
Sound
TV
Press the Cursor Right button to toggle
and select either Mono or Stereo.
Sound mode
Alt audio
Mono/Stereo
INFO
NOTE: If the signal being received is in
mono, it cannot be set to Stereo. If the signal
is being received in Stereo, the TV can be
placed in the Mono mode. (If you select the
Mono option, remember to return the
Mono/Stereo control back to Stereo when
using the TV with stereo programming.)
SELECT
SURR
CC
TV
PIXEL PLUS
HD
SCREEN
FORMAT
SURF
®
2
4
5
OR
Sound
TV
®
®
Sound mode
Alt audio
Mono/Stereo
®
PIP
Press the Menu button to remove the
on-screen menu from the TV screen.
Mono • Stereo
3
1
5
MUTE
AV+
ACTIVE
CONTROL
SAP
44
CLOCK
Stereo • Mono
Turning the AVL (Audio Volume Leveler) on or off
You may have noticed the peaks and valleys
of sound that occur between program changes
or at commercial breaks. The volume levels
often vary considerably. By turning on the
AVL (Audio Volume Leveler) control, you
can make your TV produce a more consistent
volume level. Follow the steps below to turn
AVL on.
1
2
3
4
5
Picture Sound Features Channels
TV
Settings
Sound Features Channels
TV
Demo
Volume
Equalizer
Balance
Loudness
Headphone volume
Install
Press the Menu button on the remote
control to display the on-screen menu.
Sound
Press the Cursor Right button repeatedly to select “Sound.”
TV
Off • On
AVL
Delta volume
Auto sound
Press the Cursor Down button repeatedly until AVL is highlighted.
INFO
Press the Cursor Right button to toggle
the control on or off.
SELECT
PIXEL PLUS
SURR
CC
TV
HD
SCREEN
FORMAT
SURF
®
Press the Menu button to remove the
menu from the TV screen.
2
4
OR
Sound
TV
®
®
AVL
Delta volume
Auto sound
®
PIP
3
1
5
MUTE
AV+
ACTIVE
CONTROL
SAP
45
CLOCK
On • Off
Adjusting the Delta Volume
The volume level coming from channel to
channel and broadcast to broadcast can vary
widely. The Delta Volume control will allow
the volume to be increased for channels with
weaker audio signals while allowing other
channels with stronger signals to be reduced.
When the Delta Volume control is adjusted or
changed, it will affect only the currently
tuned channel. The TV will store the setting
for that channel in its memory and remember
it when the channel is tuned again.
Picture Sound Features Channels
TV
Settings
Sound Features Channels
TV
Demo
Volume
Equalizer
Balance
Loudness
Headphone volume
Install
Sound
NOTE: The Delta Volume control does not
work with the headphones.
1
2
3
4
5
TV
AVL
Delta volume
Auto sound
Press the CH + or – button on the
remote control to tune to a specific
channel.
INFO
SELECT
SURR
CC
TV
Press the Menu button on the remote
control to show the on-screen menu.
PIXEL PLUS
HD
SCREEN
5
FORMAT
SURF
®
Press the Cursor Right button repeatedly to select “Sound.”
®
®
®
Press the Cursor Down button
repeatedly until “Delta volume” is
highlighted.
PIP
4
2
6
MUTE
Press the Cursor Left button to
decrease the overall volume, or press
the Cursor Right button to increase the
overall volume for the tuned channel.
Repeat the steps above to adjust the delta volume for additional channels.
1
AV+
ACTIVE
6
3
5
Press the Menu button to remove the
on-screen menu from the TV screen.
SAP
46
CONTROL
CLOCK
0
Using Closed Captioning
Closed Captioning (CC) allows you to read the voice
content of television programs on the TV screen.
Designed to help the hearing impaired, this feature uses
on-screen text boxes to show dialogue and conversations while the TV program is in progress. Captions
will appear on screen during captioned broadcasts.
Picture Sound Features Channels
TV
Settings
Demo
TV
Install
Settings
7
8
9
Source
Demo
Press the Menu button on the remote
control to display the on-screen menu.
Press the Cursor Down button repeatedly
to select “Settings.”
Settings
Press the Cursor Right button to select
“General.”
Press the Cursor Down button repeatedly
to select “Caption service.”
Press the Cursor Right button to enter the
caption service submenu.
Press the Cursor Up or Down button to
select one of the caption modes:
CC-1, CC-2, CC-3, or CC-4—Dialogue
(and descriptions) for the action on the
captioned TV program shows on screen.
CC-1 is used most frequently. CC-2 may
be used for alternate languages if they
are being transmitted.
T-1, T-2, T-3, or T-4—Often used for a
channel guide, schedules, bulletin board
information for captioned programs, news,
weather information, or stock market
reports.
NOTES
• Text Modes (T-1 through T-4) appear
on screen as boxes and
may block portions of the TV screen.
• Not all caption services are necessarily
being used by a TV channel during the
transmission of a captioned program.
Press the Menu button to remove the onscreen menu from the TV screen.
6
9
INFO
SELECT
PIXEL PLUS
SURR
CC
TV
8
HD
SCREEN
FORMAT
SURF
®
General
Clock
Source
Menu background
Surf
Dual screen format
3
5
Freeze format
General
Settings
®
®
®
PIP
2
4
6
9
1
7
10
MUTE
AV+
Reset AV Settings
Caption service
OSD
Change PIN
Subwoofer
Lamp Rating
Lamp Replacement
CC-1
CC-2
CC-3
CC-4
---
General
Settings
Caption service
ACTIVE
CONTROL
SAP
CLOCK
Access the CC “Off/On/On during
mute control,” using the CC button
on the remote control or the
“Features” on-screen menu.
Closed captions
CC-1
CC-2
CC-3
CC-4
---
Off
On
To turn Closed Captioning on or off:
10
Clock
Install
Follow steps 1 through 7 to select a Closed
Captioning option:
1
2
3
4
5
6
General
On during mute
Press the CC button on the remote
control.
Press the Cursor Up or Down button
repeatedly to select “Off,” “On,” or “On
during mute.”
Off—Closed captioning service will not
be displayed on the TV screen.
On—Closed captioning information (if
available) will display on the TV screen.
On during mute—Closed Captioning
information will turn on only when the
Mute button is pressed. Turns the Closed
Captioning information off when the TV
volume is restored.
Press the Menu button on the remote to
remove the on-screen display
from the TV screen.
Off
Off
Closed captions
On
On
Closed captions
On during mute
On during mute
NOTES: • The captions do not always use correct spelling and grammar. • Not all TV programs
and product commercials made for broadcast include Closed Captioning information. Refer to
your area’s TV program listings for the TV channels and times of shows with Closed Captioning.
The captioned programs are usually noted in the TV listings with service marks such as “CC.”
47
Setting the Sleeptimer
NOTE: If you have not selected your time
zone and set the Daylight Savings control, do
so before making a Sleeptimer setting. Details
are on page 65.
If you have ever fallen asleep while watching
TV, you may have wished you could have
programmed your TV to turn off automatically. The Sleeptimer feature allows you to set
your TV to do that. With the Sleeptimer control, you can set a timer to automatically
switch the TV off after a period of time you
choose—5 minutes up to 180 minutes in
5-minute increments.
1
2
3
4
5
Picture Sound Features Channels
TV
Settings
Features Channels
Demo
TV
Install
Closed captions
Sleeptimer
On timer
Features
TV
Closed captions
Press the Menu button on the remote
control to display the on-screen menu.
Sleeptimer
Press the Cursor Right button repeatedly until “Features” is selected.
INFO
SELECT
SURR
CC
TV
PIXEL PLUS
HD
SCREEN
Press the Cursor Down button repeatedly to select “Sleeptimer.”
FORMAT
SURF
®
Up To
Features
TV
Closed captions
Sleeptimer
180 min.
®
On timer
PIP
3
1
5
MUTE
HELPFUL HINTS
• To see how many minutes remain before
the TV shuts itself off, press the
Information Plus m button.
• An on-screen countdown will appear during the last minute before the TV shuts
itself off. At this time, you may cancel
the Sleeptimer setting by pressing the OK
button on the remote control.
2
4
®
®
Press the Cursor Right button to set the
sleeptimer in 5-minute increments,
from 5 minutes to 180 minutes.
Press the Menu button to remove the
on-screen menu from the TV screen.
5 min.
On timer
During the last minute of a sleeptimer setting, the TV will display a countdown screen
that will allow you to cancel the setting.
AV+
ACTIVE
CONTROL
SAP
CLOCK
The sleeptimer will switch off the TV in 45
seconds.
Cancel
48
OK
Setting the On Timer
NOTE: Before you set the On Timer, you
must set the clock. See page 65.
Picture Sound Features Channels
TV
The On Timer control allows you to set a time
for the TV to come on automatically at a certain time of day. The on timer can be set to
work once or daily at a time you specify.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Settings
Features Channels
Demo
TV
Install
Closed captions
Sleeptimer
On timer
Press the Menu button on the remote
control to display the on-screen
menu.
Press the Cursor Right button repeatedly to select “Features.”
Press the Cursor Down button repeatedly to select the “On timer” control.
Press the Cursor Right button to enter
the On Timer submenu.
Press the Cursor Up or Down button to
select “On.”
Press the Cursor Right button to shift
the menu to the start-channel submenu.
Press the Cursor Up or Cursor Down
button to select the channel you would
like the TV to tune to when it turns on.
Press the Cursor Right button to shift
the menu to the day/daily submenu.
Press the Cursor Up or Down button
to select the day to turn on or select
“Daily.”
Press the Cursor Right button to
enter the AM/PM submenu.
5
7
9
11
14
INFO
SELECT
SURR
CC
TV
PIXEL PLUS
HD
SCREEN
FORMAT
SURF
®
2
4
6
8
10
12
Features
TV
Closed captions
Sleeptimer
On timer
Features
TV
®
®
®
On timer
On
PIP
3
5
7
9
11
1
15
MUTE
ACTIVE
SAP
Press the Cursor Up or Down button
to select “AM” or “PM.”
CONTROL
CLOCK
--2
3
4
5
6
---
Features
TV
On timer
AV+
Off
On
13
--Thursday
Friday
Saturday
Daily
On
4
Features
Press the Cursor Right button to
enter the start time.
TV
Press the Number buttons to enter
the time. Use “0” first if entering a
single digit (for example, input “0, 1,
3, 0” for 1:30).
On timer
On
4
Daily
AM
FM
Daily
AM
FM
Press the OK button to confirm.
Features
TV
Press the Menu button to remove the
on-screen menu from the TV screen.
On timer
49
On
4
06:35
Using the Channel List
CH
The Channel List control shows all the available channels that Auto Programming placed
in the TV memory. The channels can be
selected from this list.
1
2
3
4
5
6
7
Press the Menu button on the remote
control to display the on-screen menu.
Picture Sound Features Channels
TV
Settings
Channels
TV
Demo
Channel list
Install
Channel lock
Lock after
TV ratings lock
Press the Cursor Right button repeatedly to select “Channels.”
Press the Cursor Down button to select
the “Channel list” control.
Channels
TV
Channel list
Press the Cursor Right button to enter
the Channel List submenu.
Channel lock
Lock after
TV ratings lock
INFO
Press the Cursor Up or Down button to
select a specific channel from the list.
5
TV
SELECT
SURR
CC
Press the Menu button to remove the
on-screen menu from the TV screen.
HD
SCREEN
FORMAT
SURF
Press the OK button. The television
will tune to the selected channel.
PIXEL PLUS
®
6
2
4
®
PIP
3
5
1
7
MUTE
AV+
ACTIVE
SAP
50
CONTROL
CLOCK
Channels
TV
Channel list
®
®
--12
13
14
15
19
---
--12
13
14
15
19
---
Removing Channels from the Channel List
You can remove specific channels from the
television’s memory by using the Channel
Remove control.
1
2
3
4
5
6
7
CH
Picture Sound Features Channels
TV
Settings
Channels
TV
Demo
Press the Menu button on the remote
control to display the on-screen menu.
Channel list
Install
Channel lock
Lock after
Press the Cursor Right button repeatedly to select “Channels.”
TV ratings lock
Press the Cursor Down button repeatedly to select the “Channel remove”
control.
Channels
TV
Movie ratings lock
Press the Cursor Right button to enter
the list of channels in the television’s
memory.
Channel remove
Antenna attenuator
5
INFO
Press the Cursor Up or Down button to
select a channel you want to remove.
TV
SELECT
SURR
CC
HD
SCREEN
FORMAT
SURF
®
6
Press the OK button to activate your
choice. After you activate the Channel
Remove control, the channel(s) highlighted will no longer be tuned when
you press the CH(annel) + or – buttons.
PIXEL PLUS
2
4
Channels
TV
®
®
Channel remove
®
PIP
3
5
Press the Menu button to remove the
on-screen menu from the TV screen.
1
7
MUTE
Channels
AV+
ACTIVE
CONTROL
CLOCK
HELPFUL HINT
Once you have removed a channel from the
Channel List, you must run the autoprogram
to restore the channel. See the Quick Use
and Setup Guide, page 8 for instructions.
11
12
13
14
15
When you use the CH(annel) + or – buttons to
scroll the available channels, channels that
have been removed using the channel remove
control will not appear.
51
--12
13
14
15
19
---
TV
Channel remove
SAP
--12
13
14
15
19
---
--12
13
14
15
19
---
Using Lock Channel
CH
For various reasons, you may want to block
the viewing of materials on a specific channel
or channels or through the audio/video (AV)
inputs. Lock Channel provides this capability.
Before using the Lock Channel feature for the
first time, you will be asked to enter the PIN
number. Use the digit buttons on the remote
control to enter the PIN you choose. All number combinations from 0000 to 9999 are
valid. After you enter the number once, you
will be asked to confirm the number, and then
the number is stored.
Picture Sound Features Channels
TV
Settings
Channels
TV
Demo
Channel list
Install
Channel lock
Lock after
TV ratings lock
Channels
TV
To set or change your PIN number, see page
62.
Channel list
Channel lock
Lock after
1
2
3
4
5
6
Press the Menu button on the remote
control to display the on-screen menu.
TV ratings lock
5
INFO
TV
Press the Cursor Right button repeatedly to select “Channels.”
Press the Cursor Down button repeatedly to highlight the “Channel lock”
control.
Press the Cursor Right button to enter
the channel lock submenu.
Press the Cursor Up or Down button to
select a specific channel from the list.
PIXEL PLUS
SURR
HD
SCREEN
FORMAT
SURF
®
6
2
4
Channels
TV
®
®
Channel lock
®
PIP
3
5
1
7
MUTE
AV+
ACTIVE
SAP
CONTROL
--12
13
14
15
19
---
Channels
TV
Channel lock
Press the OK button. The oval in front
of the channel number will change to
yellow to show that the channel is
locked.
Repeat steps 5 and 6 for other channels you
want to lock.
7
SELECT
CC
--12
13
14
15
19
---
--12
13
14
15
19
---
CLOCK
This channel is locked.
To unlock the channel,
please enter your PIN.
Press the MENU button to remove the
on-screen menu from the TV screen.
PIN
Cancel
NOTE: To unlock a locked channel, enter
your personal PIN number.
----
This screen will appear when tuned to a
locked channel. To view the channel, enter
your PIN.
HELPFUL HINT
If you tune to a channel or input source that
is locked and you enter your PIN, all locked
channels or input sources will be unlocked
until the television is shut off. When the television is turned back on again, previously
locked channels or input sources will be
locked again.
52
Using Lock After
You may want to block programming after a
certain time of day. This feature is excellent for
limiting the amount of time your children watch
TV or for preventing them watching unsuitable
programs that are often shown at night.
CH
Picture Sound Features Channels
TV
Settings
Channels
TV
Demo
Channel list
Install
NOTE: The set automatically unlocks after
3 a.m.
Channel lock
Lock after
TV ratings lock
1
2
3
4
5
6
7
8
9
10
Press the Menu button on the remote
control to display the on-screen
menu.
Channels
Press the Cursor Right button repeatedly to select “Channels.”
Press the Cursor Down button
repeatedly to select the “Lock after”
control.
Press the Cursor Right button to
enter the Lock After submenu (with
the options “Off” or “On”).
Press the Cursor Up or Down button
to select “On” from the submenu. A
submenu with the options of “AM”
or “PM” will appear.
Press the Cursor Right button to
enter the AM/PM submenu. A box
with the time (or area where the time
can be entered) will appear.
Press the Cursor Up or Down button
to select AM or PM.
5
7
INFO
SELECT
SURR
CC
TV
PIXEL PLUS
HD
SCREEN
FORMAT
SURF
®
2
4
6
8
Off
On
Lock after
TV ratings lock
Channels
TV
Off
On
AM
PM
Off
On
AM
PM
Lock after
®
PIP
3
5
7
1
10
MUTE
Channels
TV
Lock after
AV+
ACTIVE
SAP
CLOCK
CONTROL
11:30
9
Channels
TV
This channel is locked.
To unlock the channel,
please enter your PIN.
Lock after
PIN
Cancel
Press the Menu button to remove the
on-screen menu from the TV screen.
HELPFUL HINT
Channel list
Channel lock
®
®
Press the Cursor Right button to
enter the Lock After time.
Press the Number buttons to enter
the time you want the television to
lock all channels.
TV
----
Once the time has expired, all channels will
display this screen. To view the channels,
enter your PIN.
If you tune to a channel or input source that
is locked and you enter your PIN, all locked
channels or input sources will be unlocked
until the television is shut off. When the television is turned back on again, previously
locked channels or input sources will be
locked again.
53
Off
On
AM
PM
11:30
Blocking Programming Based on TV Ratings
CH
You can select specific TV Ratings to block
broadcast signals that have unsuitable content.
Picture Sound Features Channels
TV
1
2
3
4
5
6
Press the Menu button on the remote
control to display the on-screen menu.
Channels
TV
Demo
Channel list
Install
Channel lock
Press the Cursor Right button repeatedly to select “Channels.”
Lock after
TV ratings lock
Press the Cursor Down button repeatedly to select the “TV ratings lock”
control.
Channels
TV
Press the Cursor Right button to enter
the TV Ratings Lock list of options.
Channel list
Channel lock
Lock after
Press the Cursor Up or Down button to
select one of the ratings.
Press the OK button to activate your
choice.
TV ratings lock
INFO
5
TV
SELECT
PIXEL PLUS
SURR
CC
HD
SCREEN
FORMAT
SURF
®
NOTE: Some of the TV Rating options contain specific subratings. “TV-Y7” contains the
“(FV) Fantasy Violence” subrating; “TV-PG”
and “TV-14” contain “(D) Dialogue,” “(L)
Language,” “(S) Sex,” and “(V) Violence”
subratings; “TV-MA” contains “(L)
Language,” “(S) Sex,” and “(V) Violence”
subratings.
7
8
Settings
6
2
4
Channels
TV
®
®
®
TV ratings lock
PIP
3
5
1
7
MUTE
All
None
TV-Y
TV-Y7
---
Channels
TV
If the PIN message is displayed, enter
your PIN.
TV ratings lock
Press the Menu button to remove the
on-screen menu from the TV screen.
All
None
TV-Y
TV-Y7
---
AV+
All
None
TV-Y
TV-Y7
TV-G
---
(FV) Fantasy
Violence
ACTIVE
SAP
CONTROL
CLOCK
Some TV Ratings have subrating options.
TV Ratings
(from TV Broadcasters)
None—programs that are either rated “None” or have no content advisory. Selecting this option will block all such programs.
TV TV-Y (All Children)—programs designed to be appropriate for all children, especially ones ages 2–6. These programs are not expected to frighten
Y younger children.
TV TV-Y7 (Directed to Older Children)—programs designed for children ages 7 and older. These programs may be more appropriate for children who
acquired the development skills needed to distinguish between make-believe and reality. Such programs may include mild fantasy and comic vioY7 have
lence (FV).
TV TV-G (General Audience)—most parents will consider programs that are rated TV-G to be suitable for children of all ages. Such programs have little
G or no violence, no strong language, and little or no sexual dialogue or sexual situations.
TV TV-PG (Parental Guidance Suggested)—programs contain material that parents may find unsuitable for younger children. This type of programming
PG has one or more of the following: moderate violence (V), some sexual situations (S), infrequent coarse language (L), or some suggestive dialogue (D).
TV TV-14 (Parents Strongly Cautioned)—programs contain material that many parents will find unsuitable for children under 14 years of age. These
programs have one or more of the following: intense violence (V); intense sexual situations (S); strong, coarse language (L); or intensely suggestive
14 dialogue
(D).
TV TV-MA (Mature Audience Only)—specifically designed to be viewed by adults and therefore may be unsuitable for children under 17. Such programs have
MA one or more of the following: graphic violence (V); explicit sexual situations (S); or crude, indecent language (L).
54
Blocking Programming Based on Movie Ratings
You can prevent the viewing of unsuitable
programming based on movie ratings.
CH
Picture Sound Features Channels
TV
1
2
3
4
5
6
7
Press the Menu button on the remote
control to display the on-screen menu.
Settings
Channels
TV
Demo
Channel list
Install
Channel lock
Press the Cursor Right button repeatedly to select “Channels.”
Lock after
TV ratings lock
Press the Cursor Down button repeatedly to select the “Movie ratings lock”
control.
Channels
TV
Press the Cursor Right button to enter
the Movie Ratings Lock list of options.
Press the Cursor Up or Down button to
select the rating you want to lock.
Movie ratings lock
Channel remove
Antenna attenuator
INFO
5
TV
Press the OK button to activate your
choice.
NOTE: When a rating is turned on, all
higher ratings (and subratings) will be
turned on. (for example, if “R” is
selected, “NC-17” and “X” will automatically turn on also.)
Press the MENU button to remove the
on-screen menu from the TV screen.
SELECT
PIXEL PLUS
SURR
CC
HD
SCREEN
FORMAT
SURF
®
6
2
4
Channels
TV
®
®
Movie ratings lock
®
PIP
3
5
1
7
MUTE
AV+
ACTIVE
CONTROL
CLOCK
All
NR
G
PG
PG-13
---
Channels
TV
Movie ratings lock
SAP
All
NR
G
PG
PG-13
---
All
NR
G
PG
PG-13
---
Movie Ratings
(from the Motion Picture Association of America)
NR (Not Rated)—programs that the Motion Picture Association of America has chosen not to rate.
G (General Audience)—all ages admitted. Most parents will find programs that are rated G to be suitable for children of all ages. Such programs
have little or no violence, no strong language, and little or no sexual dialogue or sexual situations.
PG (Parental Guidance Suggested)—contain material that parents may find unsuitable for younger children. These programs have one or more of the
following: moderate violence, some sexual situations, infrequent coarse language, or some suggestive dialogue.
PG-13 (Parents Strongly Cautioned)—contain material that parents may find unsuitable for children under the age of 13. Programs that are rated PG13 have one or more of the following: violence, sexual situations, coarse language, or suggestive dialogue.
R (Restricted)—specifically designed for adults. Anyone under the age of 17 should view programs that are rated R only with an accompanying parent
or adult guardian. Such programs have one or more of the following: intense violence; intense sexual situations; strong, coarse language; or intensely
suggestive dialogue.
NC-17 (No one under the age of 17 will be admitted)—should be viewed by adults only. These programs have graphic violence; explicit sex; or crude,
indecent language.
X (Adults Only)—contain one or more of the following: very graphic violence, very graphic and explicit or indecent sexual acts, or very
coarse and intensely suggestive language.
55
CH
Turning the Antenna Attenuator on or off
If you live near a television station’s transmitter tower, you may receive an interfering signal from the station while watching other TV
channels. Your television’s Antenna
Attenuator control is designed to reduce the
strength of such a signal in the presence of a
strong main signal. The default setting for the
Antenna Attenuator is “Off.” If you need to
use the feature, simply toggle it “On” in the
on-screen menu. The setting you make
applies to the channel you are currently
watching and will remain in place until you
change the setting.
Picture Sound Features Channels
TV
Settings
Channels
TV
Demo
Channel list
Install
Channel lock
Lock after
TV ratings lock
Channels
TV
Movie ratings lock
1
2
3
4
5
Press the Menu button on the remote
control to display the on-screen menu.
Channel remove
Antenna attenuator
INFO
Press the Cursor Right button repeatedly to select “Channels.”
SELECT
SURR
CC
TV
PIXEL PLUS
HD
SCREEN
FORMAT
SURF
®
Press the Cursor Down button repeatedly to select the “Antenna attenuator”
control.
2
4
Press the Menu button to remove the
on-screen menu from the TV screen.
OR
Channels
TV
®
®
Movie ratings lock
Channel remove
®
Press the Cursor Right button to toggle
the control “On” or “Off.”
Off • On
Antenna attenuator
PIP
3
1
5
MUTE
AV+
ACTIVE
SAP
56
CONTROL
CLOCK
On • Off
Using Surf
You can access a list of previously viewed
channels with the Surf button on the remote
control. With Surf you can easily switch
between different TV channels that currently
interest you. Surf allows you to set up the television to cycle through two or nine channels
by pressing the Surf button on the remote
control.
1
2
3
4
5
6
7
G
Picture Sound Features Channels
TV
Settings
Demo
TV
Install
Settings
General
Clock
Source
Demo
Install
Press the Menu button on the remote
control to display the on-screen menu.
Press the Cursor Down button to select
“Settings.”
Settings
General
Clock
Source
Menu background
Surf
Dual screen format
Press the Cursor Right button to select
the “General” menu.
INFO
Press the Cursor Down button repeatedly to select the “Surf” control.
SELECT
SURR
CC
TV
PIXEL PLUS
HD
SCREEN
FORMAT
SURF
Press the Cursor Right button to toggle
the Surf control to “2 channels” or “9
channels.”
®
7
2
4
Press the Menu button to remove the
on-screen menu from the TV screen.
If you selected the “2 channels” Surf
option, pressing the Surf button allows
you to alternate between the currently
viewed channel and the previously
viewed channel.
3
5
General
Settings
Menu background
®
®
Freeze format
Surf
2 channels • 9 channels
®
Dual screen format
PIP
Freeze format
1
6
MUTE
OR
General
Settings
Menu background
If you selected the “9 channels” Surf
option, pressing the Surf button displays a Surf list in which you can
place up to 9 favorite channels. A/V
sources also can be included in the list.
To add a channel to the list, tune to the
channel, press the Surf button, then
press the Cursor Right button.
Surf
AV+
Freeze format
ACTIVE
CLOCK
CONTROL
SAP
Using 9 Channels Surf, place up to 9 favorite
channels in the Surf list.
If you attempt to add more than 9
channels to the list, the channel on the
bottom of the list will be automatically
removed to make room for the newly
added channel.
10
Surf
2 Channels Surf
After you have placed your favorite
channels in the list, press the Surf button as many times as necessary to tune
to the desired favorite channel. Or,
with the Surf list displayed, press the
Cursor Down or Up buttons to tune to
the desired channel.
To remove a channel from the list,
press the Surf button to display the list,
press the Cursor Down or Up buttons
until you select the channel you want
to remove, then press the Cursor Right
button.
9 channels • 2 channels
Dual screen format
8
22
Press to add
If you decide you don’t want a channel in the
list, you can remove it.
9 Channels Surf
3
6
8
12
18
24
33
56
68
Press to remove
57
Surf
46
28
15
22
12
17
AV1
25
13
10
Using Dual Screen and PIP
G
The Dual Screen feature, also referred to as
Picture In Picture (PIP), will allow you to
choose the size of the dual screen window to
be displayed when the Dual Screen/PIP button is pressed on the remote control. The window can be set to Dual Screen, Large PIP, or
Small.
Press the Menu button on the remote
control to display the on-screen menu.
Press the Cursor Down button to select
“Settings.”
Press the Cursor Right button to select
the “General” menu.
Press the Cursor Down button repeatedly to select the “Dual screen format”
control. A submenu or list of options
will appear.
Press the Cursor Right button to enter
the list of options.
Press the Cursor Up or Down button to
select the desire dual screen format.
Choose from “Dual screen,” “Large
PIP,” or “Small PIP.”
Press the Menu button to remove the
on-screen menu from the TV screen.
Press the Dual Screen/PIP button on
the remote control to display the second video window in the format you
have chosen.
Continuing to hold the Dual
Screen/PIP button will cycle through
the Dual Screen/PIP options.
Press the Dual Screen button again to
return the television to the main video
screen.
1
2
3
4
5
6
7
8
Picture Sound Features Channels
TV
Settings
Demo
TV
Install
Settings
General
Clock
Source
Demo
Install
General
Settings
Clock
Menu background
Surf
Dual screen format
6
INFO
SELECT
SURR
CC
TV
PIXEL PLUS
HD
SCREEN
FORMAT
SURF
®
3
5
General
Settings
Menu background
®
®
Freeze format
Surf
®
Dual screen format
8
Dual screen
Large PIP
Small PIP
PIP
Freeze format
2
4
6
1
7
MUTE
General
Settings
Dual screen format
AV+
Dual screen
Large PIP
Small PIP
ACTIVE
SAP
CONTROL
CLOCK
Dual Screen
See the next page for information on changing channels or input sources in Dual
Screen/PIP mode, and for re-positioning the
Large or Small PIP screens.
HELPFUL HINT
Large PIP
Your Cineos TV has a Double Window (DW) and a Picture-in-Picture
(PIP) mode in which it is possible to see a signal from another source without interrupting the program/video that you are looking at.
When switching on DW or PIP mode we want you to be aware that the
color and picture settings of the left window (for DW) respectively of the
main screen (for PIP) are applicable to the full screen. This may result in
the fact that colors on the right window (for DW) or the small window (for
PIP) look different than when that signal is displayed on the main screen.
So for instance if a disc from a DVD player is playing in the right window
while you watch TV in the left window it may be that the colors of the
DVD player look different from when the DVD is playing full screen.
58
Small PIP
Source
Changing Channels/Input Sources and Repositioning Dual Screen/PIP
When using Dual Screen:
1
2
3
A light-colored border indicates the selected
screen. If the screen whose channel or input
source you want to change is not selected,
press the Cursor Right or Left button to select
the desired screen.
To change channels in the selected screen, press
the CH (Channel Selection) + or – buttons.
Or:
To change the input source, first press the
Source (AV+) button. Then, within 6 seconds,
press the Cursor Up or Down until your
desired input source is highlighted. Press the
OK button to confirm. The desired input
source appears in the selected screen.
NOTE: If the list of input sources “times out”
(leaves the screen) before you can make your
selection, press the Source (AV+) button again
to display the list again.
INFO
SELECT
SURR
CC
TV
PIXEL PLUS
3
HD
SCREEN
1
1
FORMAT
SURF
®
®
®
32
®
PIP
3
Source
OK
Source
OK
MUTE
When using Large or Small PIP:
1
2
3
When the PIP window is on screen, press the
Cursor Up or Down button to select either the
main or PIP screen. A light-colored border surrounds the PIP screen when it is selected. The
PIP screen must be selected before its channel
or input source can be changed.
To change channels in the PIP screen, press
the CH (Channel Selection) + or – buttons.
Or:
To select a different input source, first press
the Source (AV+) button. Then, within 6 seconds, press the Cursor Up or Down until your
desired input source is highlighted. Press the
OK button to confirm. The desired input
source appears in the PIP screen.
NOTE: If the list of input sources “times out”
(leaves the screen) before you can make your
selection, press the Source (AV+) button again
to display the list again.
3
AV+
ACTIVE
CONTROL
SAP
CLOCK
1
3
4
5
To reposition the PIP screen:
4
5
6
TV
AV1:DVD
AV2:Recorder
AV3:SAT
AV4:HD
AV5:Other
AV6:HD
SIDE:Camera
Press the Cursor Up or Down button. The ball
and direction indicator appear on screen.
Within 6 seconds, press the OK button. A multidirectional symbol appears on screen.
NOTE: If the ball and direction indicator
“time out” (leave the screen) before you press
the OK button, simply press the Cursor Up or
Down button again.
Press the Cursor Up, Down, Left, or Right buttons to move the PIP window to the desired
location.
Press the OK button. The ball and direction
indicator reappear and “time out” (leave the
screen) in about 6 seconds.
INFO
SELECT
PIXEL PLUS
SURR
CC
TV
HD
SCREEN
5
FORMAT
SURF
®
®
®
®
PIP
1
3 2
4
5
MUTE
AV+
ACTIVE
3
59
SAP
CONTROL
CLOCK
5
3
4
6
TV
AV1:DVD
AV2:Recorder
AV3:SAT
AV4:HD
AV5:Other
AV6:HD
SIDE:Camera
G
G
Resetting the Audio/Video Settings to Factory Default Values
You can reset the TV’s Sound and Picture settings to the factory default values.
1
2
3
4
5
6
Press the Menu button on the remote
control to display the on-screen menu.
Picture Sound Features Channels
TV
Settings
Demo
TV
Install
Settings
General
Clock
Source
Demo
Press the Cursor Down button to select
“Settings.”
Install
Press the Cursor Right button to select
the “General” menu.
Press the Cursor Down button repeatedly to select the “Reset AV settings”
control.
Settings
Clock
Source
Menu background
Surf
Dual screen format
Press the OK button to reset the AV
settings to factory values.
Press the Menu button to remove the
on-screen menu from the TV screen.
General
INFO
5
SELECT
SURR
CC
TV
HD
SCREEN
FORMAT
SURF
Freeze format
PIXEL PLUS
®
3
General
Settings
®
®
®
PIP
2
4
1
6
MUTE
AV+
ACTIVE
SAP
60
CONTROL
CLOCK
Reset AV Settings
Caption service
OSD
Change PIN
Subwoofer
Lamp Rating
Lamp Replacement
OK
To erase settings and
reset them to their
defualt values,
please press OK.
Selecting an On-screen Display Option
The television’s on-screen display (OSD) can
be set to show only the current channel number or the channel number with additional TV
operating modes and status-screen information.
1
2
3
4
5
Picture Sound Features Channels
TV
Settings
Demo
TV
Install
Settings
General
Clock
Source
Demo
Press the Menu button on the remote
control to display the on-screen menu.
Install
Press the Cursor Down button to select
“Settings.”
Press the Cursor Right button to select
the “General” menu.
INFO
Press the Cursor Right button to toggle
between “Minimum” and “Normal.”
SELECT
PIXEL PLUS
SURR
CC
TV
HD
SCREEN
FORMAT
SURF
Normal mode—the on-screen display
stays on screen. Channel/Input source,
call letters and program name (if provided by the signal source), picture format, and sound mode are shown.
®
10 WABC
10 WABC
Minimum
Mode
Automatic
Mono selected
3
5
Clock
Source
Freeze format
General
Settings
Reset AV settings
®
®
Caption service
®
OSD
Minimum • Normal
PIP
Time zone
2
4
1
6
MUTE
AV+
Press the Menu button to remove the
on-screen menu from the TV screen.
General
Settings
Menu background
Surf
Dual screen format
Press the Cursor Down button repeatedly to select the “OSD” control.
Minimum mode (default mode)—
channel/Input source, call letters, and
program name (if provided by the signal source) are shown. The on-screen
display disappears after a few seconds.
In Minimum mode, the volume scroll
bar will not be displayed when you
press the volume control.
6
G
ACTIVE
SAP
Normal
Mode
61
CONTROL
CLOCK
Daylight saving
General
Settings
Reset AV Settings
Caption service
OSD
Change PIN
Subwoofer
Lamp Rating
Lamp Replacement
Normal • Minimum
G
Setting up or Changing a PIN (Personal Identification Number)
In the General menu, you can set up a new
PIN number or change an existing one for the
Lock Channel feature.
Picture Sound Features Channels
TV
Settings
1
2
3
4
Press the Menu button on the remote
control to display the on-screen menu.
Demo
TV
Install
Settings
Source
Demo
Press the Cursor Down button to select
“Settings.”
Press the Cursor Right button to select
the “General” menu.
Press the Cursor Down button repeatedly to select either “Set PIN” or
“Change PIN.”
• If no PIN exists yet, the menu will
show “Set PIN.” Simply follow the
on-screen instructions to set your
PIN.
Settings
• All number combinations from 0000
to 9999 are valid numbers.
Press the OK or Cursor Right button to
begin the process.
INFO
PIXEL PLUS
SURR
CC
TV
5
SELECT
HD
SCREEN
FORMAT
SURF
®
Source
Freeze format
3
5
®
PIP
2
4
1
9
MUTE
AV+
ACTIVE
SAP
CONTROL
CLOCK
Enter a new four-digit PIN.
General
Settings
6
7
8
Reset AV Settings
Caption service
OSD
Change PIN
Subwoofer
Lamp Rating
Lamp Replacement
To change your PIN,
please press OK.
Please enter your
current PIN.
PIN
Cancel
----
Please enter your new PIN.
Re-enter your new PIN using the Digit
buttons to confirm the code. Your PIN
is now changed.
Press the Menu button on the remote
control to remove the on-screen menu
from the TV screen.
Clock
®
®
Enter your current PIN using the Digit
buttons on the remote control.
If you have forgotten your PIN, you
can enter the overriding/default PIN
0-7-1-1.
General
Menu background
Surf
Dual screen format
• If a PIN has previously been entered,
the menu will show “Change PIN.”
7
8
9
Clock
Install
NOTES:
5
6
General
PIN
Cancel
----
General
Settings
To confirm your new PIN,
please enter it again.
Change PIN
Subwoofer
Lamp rating
PIN
Cancel
62
----
Lamp replaced
OK
Your PIN has been changed.
Setting the Subwoofer Control
If you connect a home-cinema surroundsound system with subwoofer to your TV (see
page 15), you will need to select the
Subwoofer “Yes” option in the TV’s onscreen menu. These steps explain how.
1
2
3
4
5
Picture Sound Features Channels
TV
Settings
Demo
TV
Install
Settings
General
Clock
Source
Demo
Press the Menu button on the remote
control to display the on-screen menu.
Install
Press the Cursor Down button to select
“Settings.”
Press the Cursor Right button to select
the “General” menu.
Settings
INFO
Press the Cursor Right button to toggle
the Subwoofer control to “Yes” or
“No.” Select Yes if you have connected
an external subwoofer to the SUB
OUT jack on the back of the TV.
Press the Menu button on the remote
control to remove the on-screen menu
from the TV screen.
HELPFUL HINT
“Yes” must be activated for the Subwoofer
menu selection before the SUB OUT jack
will supply output. This is because the subwoofer’s low frequencies are redirected to the
main TV speakers when “No” is selected.
General
Clock
Menu background
Surf
Dual screen format
Press the Cursor Down button repeatedly to select the “Subwoofer” control.
SELECT
SURR
CC
TV
PIXEL PLUS
HD
SCREEN
FORMAT
SURF
®
3
5
PIP
2
4
1
6
MUTE
Freeze format
General
Settings
®
®
®
6
G
Reset AV Settings
Caption service
OSD
Change PIN
Subwoofer
Lamp Rating
Lamp Replacement
No • Yes
General
Settings
AV+
ACTIVE
SAP
63
CONTROL
CLOCK
Reset AV Settings
Caption service
OSD
Change PIN
Subwoofer
Lamp Rating
Lamp Replacement
Yes • No
Source
Setting the Clock—Auto Clock Mode
G
There are several features which require the
TV clock to be set. You can either set the
clock manually or have the TV acquire the
time from the appropriate TV channel.
1
2
3
4
Press the Menu button on the remote
control to display the on-screen menu.
Picture
Sound Features Channels
TV
Settings
Demo
TV
Install
Settings
General
Clock
Source
Demo
Install
Press the Cursor Down button to highlight “Settings.”
Press the Cursor Right button repeatedly to select the “Clock” menu.
Press the Cursor Down button to select
Auto Clock Mode. Then Press Cursor
Right Button to Select “Automatic” or
“Manual.” Select Automatic to have
the TV acquire the time from a the TV
signal. Choose “Manual” to set the
time yourself.
Clock
Settings
6
INFO
SELECT
SURR
CC
TV
PIXEL PLUS
HD
SCREEN
FORMAT
SURF
®
If you choose to set the time Automatically
you will need to set the “AutoClock Channel”
by continuing with steps 5-8 below. If you
select manual you will need to make the correct settings by continuing on page 67.
Auto Clock Channel
5
6
After following steps 1-4 above, press
the Cursor Down button to select Auto
Clock Channel.
7
8
Press the Menu button on the remote
control to remove the on-screen menu
from the TV screen.
Press the Cursor Right button to enter
the channel list. Select your local PBS
channel by using the Cursor Up or
Down buttons to scroll through the
channel list or inputing the the channel
using the number buttons.
3
4
6
®
®
®
PIP
2
4
5
6
1
7
6
MUTE
AV+
ACTIVE
CONTROL
SAP
Next Set the Time Zone and Daylight
Savings Time. See page 68 for instructions.
HELPFUL HINT
When the clock is set to “automatic” there
will be a several second delay when the TV
is turned on and off. During this delay the
blue LED will blink. This is normal.
64
CLOCK
Auto clock mode
Auto clock channel
Time
Day
Time zone
Daylight saving
Clock
Settings
Automatic
Auto clock mode
Auto clock channel
Time
Day
Time zone
Daylight saving
Clock
Settings
Auto clock mode
Auto clock channel
Time
Day
Time zone
Daylight saving
--34
35
36
37
38
---
Manual
Setting the Clock Manually
If you select Manual in the Auto Clock Mode,
you need to set the time manually.
1
2
3
4
5
6
7
8
9
10
11
Press the Menu button on the remote
control to display the on-screen
menu.
Picture
Sound Features Channels
G
TV
TV
Settings
Settings
Demo
Demo
Install
Install
General
Clock
Clock
Source
Source
Press the Cursor Down button to
highlight “Settings.”
Press the Cursor Right button repeatedly to select the “Clock” menu.
Settings
5
6
9
Press the Cursor Down button to
select Time.
Press the Cursor Right and Up or
Down buttons to select AM or PM.
Press the Cursor Right button and
use the number buttons to enter the
current time. (For example, enter 0,
8, 3, and 0 if the time is 8:30 or 1, 2,
4, and 5 if the time is 12:45.) You
can also use the Cursor buttons (Up,
Down, Right, Left) and scroll
through each number. Press Cursor
Right to move to the next place.
Next press the Cursor Left button
repeatedly to back out to the Clock
Menu.
Press Cursor Down to select “Day”.
Then press Cursor Right to enter the
list of days.
Press the Cursor Up or Down buttons to select the current day.
INFO
SELECT
TV
PIXEL PLUS
SURR
CC
HD
SCREEN
FORMAT
SURF
7
®
3
5
6
8
®
®
®
Auto clock mode
Auto clock channel
Time
Day
Time zone
Daylight saving
Clock
Settings
Auto clock mode
Auto clock channel
Time
Day
Time zone
Daylight saving
AM
PM
-- --
AM
PM
8:28
PIP
2
4
5
6
8
9
1
10
MUTE
Clock
Settings
Auto clock mode
Auto clock channel
Time
Day
Time zone
Daylight saving
AV+
ACTIVE
SAP
CONTROL
CLOCK
Clock
Settings
Auto clock mode
Auto clock channel
Time
Day
Time zone
Daylight saving
Press the Menu button on the remote
control to remove the on-screen
menu from the TV screen.
Next Set the Time Zone and
Daylight Savings Time. See page 68
for instructions.
65
Sunday
Monday
Tuesday
Wednesday
---
G
Selecting a Time Zone and Setting the Daylight Savings Control
Your television can acquire the current time
from the signal being received. It needs to
know your Time Zone, however, and whether
or not you use Daylight Savings.
1
2
3
4
5
6
7
8
9
Press the Menu button on the remote
control to display the on-screen menu.
Picture Sound Features Channels
TV
Settings
Demo
TV
Install
Settings
General
Source
Demo
Install
Press the Cursor Down button to highlight “Settings.”
Press the Cursor Right button repeatedly to select the “Clock” menu.
General Source
Menu background
Press the Cursor Down button repeatedly to select the “Time Zone” control.
Surf
Press the Cursor Right button to enter
the list of available time zones.
Press the Cursor Up or Down button to
select your time zone.
Press the Cursor Left button, then press
the Cursor Down button to select the
“Daylight Savings” control.
Press the Cursor Right button to toggle
“Daylight Savings” to “Automatic” for
the TV to change to Daylight Savings
Time automatically. Or select “Off.”
Press the Menu button to remove the
on-screen menu from the TV screen.
6
INFO
SELECT
SURR
CC
TV
PIXEL PLUS
HD
SCREEN
FORMAT
SURF
7
®
3
5
8
Dual screen format
Freeze format
General
Settings
Reset AV settings
®
®
Caption service
OSD
®
Time zone
PIP
2
4
6
7
Daylight saving
1
9
MUTE
General
Settings
Time zone
AV+
ACTIVE
SAP
CONTROL
Atlantic
Eastern
___
Atlantic
Eastern
Central
---
CLOCK
General
Settings
Reset AV settings
Caption service
OSD
Time zone
Daylight saving
Off • Automatic
General
Settings
Reset AV settings
Caption service
OSD
Time zone
Daylight saving
66
Auomatic • Off
Using Installation Features: Language and Autoprogram
For Spanish- and French-speaking TV owners, an on-screen Language option is present.
The Language control enables you to set the
TV’s on-screen menu to be shown in either
English, Spanish, or French.
1
2
3
TV
Settings
Settings
Press the MENU button on the remote
control to show the on-screen menu.
Demo
Demo
Install
Install
Press the Cursor Down button repeatedly until “Install”
is selected.
3
38
5 812
SELECT
SELECT
PIXEL PLUS
After you have made your language
selection, press the OK button to confirm your selection.
SURR
CC
For AutoProgram:
Press the Cursor Down button to select
“Install” mode control.
Press the Cursor Right button to display
a list of Install mode options:
“Antenna,” “Automatic,” “Cable.”
Press the Cursor Up or Down button to
select one of the options. Select
“Antenna” for normal outside- or insidetype antenna. Select “Cable” for a cable
company supplied signal. When
“Automatic” is selected, the TV will
automatically set the mode based on the
type of signal it detects coming into the
TV. The programming process may be
faster if you choose the specific type of
connection you have made, either
Antenna or Cable.
10
11
12
13
Press the Cursor Left button after
making your “Install” mode selection.
PIP
2
4
7
9
11
12
English
Autoprogram
Select your menu language with
the cursor up/down.
Press the OK key on the remote
control to confirm.
OK
®
®
FORMAT
®
®
Français
Español
PIP
2
4
7
9
11
®
MUTE
®
Press the MENU button to remove the
on-screen menu from the TV screen.
Language
®
SURF
®
HD
SCREEN
HD
SCREEN
5
Español
FORMAT
SURF
TV
Français
PIXEL PLUS
SURR
CC
TV
INFO
Autoprogram
Press the cursor down to select
your menu language
English
INFO
Press the Cursor Down button to select
English, Español (Spanish), or Francais
(French).
Language
Language
Press the Cursor Right button to shift
the menu to the left and select
“Language” or “Autoprogram.”
For Language:
4
5
6
7
8
9
Picture Sound Features Channels
TV
MUTE
AV+
ACTIVE
1
6
13
1
6
13
Language
Autoprogram
The language you have chosen is
English
English
Français
Español
Autoprogram
The TV will search for, find and store
all the available channels.
Press the cursor down to proceed.
Install mode
Install
AV+
SAP
ACTIVE
Autoprogram
CLOCK
CONTROL
Automatic
Install mode
Install
Keep the predefined automatic
detection of
cable or anntenna
or make your own
selection.
Autoprogram
Install mode
Install
Antenna
Automatic
Cable
Autoprogram
Install mode
Install
Press the Cursor Down button to
select “Install.”
Searching
Autoprogram
Install mode
Automatic
Install
24 analog channels found
Press the Cursor Right button to start
the programming process.
Press the Menu button to remove the
on-screen menu from the TV screen
when the Autoprogramming process
has finished.
Autoprogram
Install mode
Install
Start
Autoprogram
Install mode
60 analog channels found
Autoprogramming is complete
Install
Start
To Autoprogram Analog channels, press the right arrow.
67
G
CLEANING THE TV
WARNING
Be sure the TV is
unplugged before
cleaning it.
To avoid possible shock hazard, be sure the
TV is unplugged from the electrical outlet
before cleaning.
Cleaning the Cabinet
• Regularly dust the TV cabinet with a dry,
nonscratching duster.
• Gently wipe the cabinet surfaces with a
soft, clean cloth.
• Occasionally vacuum the ventilation slots
on the back cover of the set. See the next
section on “Cleaning or Replacing the
Filters.”
• Never use thinners, insecticide sprays, or
other chemicals on or near the cabinet, as
they might cause permanent marring of the
cabinet finish.
• The television contains plastic parts. DO
NOT use benzine, thinners, or other chemicals to clean. DO NOT use insecticide or
other volatile substances nearby. DO NOT
allow the TV to come into contact for
extended periods of time with rubber or
vinyl products.
Use a nonscratching duster.
Don’t use chemicals on or
near the TV.
Cleaning the Screen
• Use a soft dry cloth to wipe the screen. Use
even, easy, vertical strokes. Take care not
to scratch or damage the screen surface.
Avoid wearing jewelry or using anything
abrasive.
Avoid wearing jewelry
that may scratch the TV.
Wipe with even, easy, vertical strokes.
68
Cleaning or Replacing the Filters
The Cineos TV has two filters that cover air
inlets on the bottom of the set. Maintaining a
free flow of air through the inlets is very important. If the air filters become dirty, clogged, or
blocked, the temperature in the set will rise.
SERVICE 12C
Should the heat level become too high due to
blockage, a sensor detects this, and a warning
message appears on screen alerting you to
check the air inlets for blockage. The message
will be displayed for 6 seconds. It reappears
every 15 minutes as long as the temperature
remains too high.
DVI
AV6
AV1
L
L
AV2
V
AV5
ER
NT
CE
ER
TER
3
4
ER
NT
CE
4
CE
NT
ER
Turn the filter so that the arrow is
pointing toward the center of the TV.
Align the edges of the filter with the
slot track, then gently slide it all the
way back into the slot. A click sound
can be heard as the filter reaches the
correct position.
2
TER
WARNING:
DO NOT operate the TV without filters. This will cause serious damage to
the TV.
R
L
S-VIDEO
RGB+HV
SUB OUT
AV3
1
CEN
To order replacement filters, call the
Philips Customer Care Center at
1-800-531-0039. The part number for
the Philips TV inlet filter assembly is
3135 037 51810.
V
R
L
R
L
Pr
Pb
Y
Pr
Pb
Y
STANDARD/
HD INPUTS
STANDARD/
HD INPUTS
AV4
Locations of Air Filters
NT
Examine the filter for dust or other
contamination. If it is dirty, clean it
with a vacuum cleaner. DO NOT
WASH it. Replace the filter if vacuuming does not sufficiently clean it.
V
TUNER
CEN
Grasp the filter and gently pull it
straight out.
Y
L
R
CE
1
2
3
L
G
WARNING: Do not tip the TV when removing or installing the filters. This may result in
instability of the TV.
Place your fingers under one of the filter slots located at either bottom left or
right in back of the TV cabinet.
Pb
R
R
If the internal temperature of the TV rises to
high, a warning message alerts you that the TV
is shutting down. If the temperature remains at
this high level for 1 minute, the TV will enter
Standby mode. In Standby mode, the TV is off.
Be sure the TV is not placed on a surface (such
as a shag carpet) that will prevent the free flow
of air through the inlets, and periodically clean
or replace the filters as detailed in the following
instructions.
S-VIDEO
Pr
MON
OUT
G
R
69
Replacing the Lamp
The Cineos TV uses a lamp with a limited
lifetime to illuminate the picture. A Lifetime
counter in the TV records the operating time
of the lamp. One hundred hours before the
lamp reaches the end of its life, a warning
message will appear on screen. This will
allow you to prepare to replace the lamp or
take action right away. The message will disappear within 6 seconds. It will reappear each
time the TV is turned on until the lamp is
replaced.
A blinking orange light
in the Active Standby
Window means that the
lamp needs to be
replaced.
To order a replacement lamp, call the
Philips Customer Care Center at
1-800-531-0039. A Philips associate will
be happy to assist you. The part number
for the Philips TV replacement lamp is
3122 438 71310.
1
Here are the steps for replacing the lamp:
2
1
2
Power off the TV. Unplug the TV.
The lamp door is located on the back
of the TV next to the power cord.
Gently slide the door completely to the
right to open.
CAUTION: The lamp gets extremely
hot. Allow a cool-down time before
removing the lamp.
3
4
Unscrew the thumb screws until they
are dangling.
3
Lift the handle out.
Continued on page 71.
4
70
Replacing the Lamp
Continued from page 70.
5
CAUTION: When removing the lamp,
do not touch the glass envelope. It may
still be hot.
5
Grasp the handle, then pull out and
slightly down to remove.
WARNING: The lamp contains mercury. Dispose of the lamp in accordance with local, state, and federal
regulations.
6
CAUTION: When installing the new
lamp, do not touch the glass envelope.
Oil from skin can reduce lamp life.
Align the groove on top of the new
lamp’s housing with the corresponding
groove pocket inside the TV, then slide
the new lamp into place.
7
8
Tighten the thumb screws clockwise
until finger tight only. Do not overtighten.
9
Go to page 68 for instructions for setting the Lamp Rating and resetting the
Lamp Lifetime Counter.
6
Groove
Slide the lamp door closed.
IMPORTANT: The door must be
closed completely to the left.
Otherwise, the TV will not operate.
7
8
9
71
Go to page 69 for instructions for resetting the
Lamp Lifetime counter through the TV’s onscreen menu.
Resetting the Lamp’s Lifetime Counter
After installing a new lamp in the TV, you
need to enter the “Lamp rating” list in the onscreen menu and select the alphabetical code
that is provided with the lamp. The recommended Philips replacement Lamp is rated
for 6000 hours, an F rating
Picture Sound Features Channels
TV
Settings
TV
Demo
Install
Press the Cursor Right button to select
the “General” menu.
Press the Cursor Down button repeatedly until “Lamp rating” is selected.
Press the Cursor Right button to enter
the rating list.
If necessary, press the Cursor Down
button as many times as necessary to
select the letter for your replacement
lamp.
Settings
9
7
INFO
SELECT
PIXEL PLUS
SURR
CC
TV
HD
SCREEN
FORMAT
SURF
®
®
®
®
PIP
2
4
6
8
3
5
8
9
1
10
MUTE
General
Clock
Source
Menu background
Surf
Dual screen format
Freeze format
General
Settings
Reset AV Settings
Caption service
OSD
Change PIN
Subwoofer
Lamp Rating
Lamp Replacement
A
B
C
---
General
AV+
Settings
ACTIVE
SAP
7
8
9
10
Source
Demo
Press the Menu button on the remote
control to display the on-screen menu.
Press the Cursor Down button to select
“Settings.”
Clock
Install
The next step is to use the “Lamp replaced
control” to tell the TV that you have installed
a new lamp. This control resets the Lifetime
Counter to 0 for the new lamp and begins
keeping track of the lifetime of the new lamp.
1
2
3
4
5
6
General
Settings
CONTROL
CLOCK
Press the Cursor Left button to return
to the “General” menu.
A
B
C
---
Press the Cursor Down button to select
“Lamp replaced.”
Press the OK button to confirm that
you have changed the lamp.
General
Settings
Reset AV Settings
Caption service
OSD
Change PIN
Subwoofer
Lamp Rating
Lamp Replacement
Press the Menu button to remove the
on-screen menu from the TV screen.
HELPFUL HINTS
• One hundred hours before the lamp
reaches the end of its life, a warning
message will appear on screen to alert
you. Changing the lamp at this point is
recommended for optimal performance.
• A blinking orange light on the front of
the set means that the lamp is not working anymore and needs to be replaced.
72
Press OK after you replaced
the light bulb.
OK
Troubleshooting
Review This List of Symptoms and Checks Before Requesting Service
You may be able to solve the problem yourself. Charges for TV installation and adjustment of customer controls are not covered under your warranty.
If you need to call a customer service representative, please know the model number and serial number of your product before you
call. This information is displayed on the back of the product. Also, please take a moment to identify the problem you are having,
and be prepared to explain this to the representative. If you believe the representative will need to help you with operations, please
stay near the product. Our representative will be happy to assist you. To reach our Customer Care Center, call 1-800-531-0039.
Reset your Cineos TV
• Modern TVs are complicated systems which consist of multiple hardware and software subsystems which operate in conjunction
with each other. One consequence of the increasing complexity of televisions is that they often require some additional time to
fully power on or off as all of the subsystems must power up or down as well. Occasionally one of these subsystems may not
fully engage or disengage before an additional function is begun- for example pressing numerous buttons on the remote before the
set is fully powered up. In such cases, the set may appear to be frozen or non-responsive.
If you are experiencing unexpected behavior from your Cineos TV the first possible fix is to unplug the set from the outlet for a
minute or so. This will ensure that all subsystems are fully powered down. Then plug it back in after which the Cineos will restart
and perform internal diagnostics which should result in normal operation.
TV-related Checks
The TV won’t switch on.
•
•
•
•
•
•
Make sure the power plug is plugged in.
If you’re using the TV remote control to turn the TV on, be sure the remote is in TV mode. (pages *Q6, 24.)
Plug something else in to be sure the wall outlet (or extension cord) is receiving power.
The remote control could have a problem. See the troubleshooting section “Remote-related Checks” on page 70.
Make sure the lamp door is not ajar. The TV is designed not to operate with the lamp door open. (pages *Q1, 68-69)
If a red light is blinking on the front of the TV, the set has entered protection mode. If this happens it usually means you simply
need to reset the TV. Unplug the TV for 60 seconds. Then plug the TV in and try to switch it on. If the light is still blinking red,
call the Customer Care Center at 1-800-531-0039.
The TV switches off unexpectedly.
• If the lamp door is opened, the TV will shut down. The TV is designed not to operate when the lamp door is ajar.
• If a red light is blinking on the front of the TV, the set has entered protection mode. Unplug and plug the set back in a couple of
times and try to switch it on. If the problem persists, contact the Customer Care Center at 1-800-531-0039.
• The Sleeptimer may have been set to turn the TV off. Turn the TV back on if desired. (page 45)
The TV switches on unexpectedly.
• The On Timer may have been set. (page 46)
An on-screen message tells you that it is time to replace the lamp.
• The message appears on screen when the lamp has 100 hours of life left, and will reappear each time the TV is turned on until the
lamp is replaced. Prepare to replace the lamp or take action right away. (pages 70-72)
An on-screen message instructs you to check the air inlets for blockage.
• Check the air inlets and filters for blockage and clean or replace the air filters as necessary. (pages 68-69).
You have a picture but no sound.
• Make sure Mute is not on. (page *Q6)
• The TV speakers may be turned off. Make sure the Center Channel Amp Switch on the back of the TV is in the INT position.
(page 7)
*Q refers to the Quick Use and Setup Guide that came with your TV.
73
Troubleshooting
TV-related Checks (continued)
You have no picture.
• If you have made a connection to the TV’s Tuner jack be sure to use Autoprogram. (page *Q8).
• If you want to view materials from an accessory device (DVD player, VCR, or satellite receiver, for example) be sure you have
selected the input source to which you have connected the device—AV1, AV2, AV3, AV4, AV5, AV6, or Side. (pages *Q4, *Q6,
10–16, 18, 20)
• Make sure you have made connections correctly. (pages *Q3–5, 10–16, 18, 20)
You have no picture and no sound.
• If you see a blinking orange light on the front of the set, this means that the lamp needs to be replaced. (pages 70–72)
You see scrolling images.
• Make sure you have made connections correctly. (pages *Q3–5, 10–16, 18, 20)
The picture appears doubled or tripled.
• If you are using an antenna, be sure it is facing in the correct direction. Also, check to see if it may be receiving signals that are
being reflected off of mountains or buildings.
The picture shakes or is not clear.
• If you are using an antenna, make sure it is not broken or shorted, and make sure the antenna cable is connected properly and
securely.
• If you are using a VCR and selecting channels on the TV, make sure the TV/VCR mode on the VCR is set to TV.
The picture has no colors or colors are not correct.
• Make sure you have made connections correctly. (pages *Q3–5, 10–14, 16, 18)
• If you have connected accessory equipment, such as an HD satellite receiver, make sure the color setting on the accessory equipment is correct. See the user manual for the HD satellite receiver.
The TV sound has an unusual quality.
• Check the TV’s Equalizer control to be sure it is set to the option you want. (page 33)
Remote-related Checks
The remote control does not work.
• Make sure nothing is blocking the path between the remote control and the TV or accessory device you want to operate.
• Make sure you point the remote directly at the TV or accessory device you want to operate.
• If you want to operate the TV, make sure the remote is in TV mode. If a green light is flashing the remote is in an accessory
mode, press the Select button once. If you want to operate an accessory device, program the remote to operate the device if necessary and make sure the remote is in the appropriate mode for the device. (pages *Q6, 22–28)
• Make sure you have installed the batteries correctly. (page *Q6)
• The batteries could be dead. When the batteries in the remote run low, the remote will send a “Battery Low” command to the TV.
The TV will then display a message on the screen reminding you to replace the batteries as soon as possible.
• You may want to try taking the remote batteries out and then putting them back in. NOTE: After taking the batteries out, you
may need to reprogram the remote for use with accessory devices.
*Q refers to the Quick Use and Setup Guide that came with your TV.
74
Product Specifications
Picture
• Subtitle and heading shift (scroll the screen with the cursor buttons)
• Auto Format/Auto Screen Fit
• Smart Clock
• Screen Size
62PL9774: 62” measured diagonally
55PL9774: 55” measured diagonally
• Aspect ratio: 16:9
• Display technology: Philips single-panel LCOS (Liquid Crystal on
Silicon)
• Flicker free; perfect convergence
• Resolution: 1280 x 720
• 1080i HD performance and line doubling
• Contrast ratio: 400:1
• PixelPlus™
• Digital Natural Motion™
• Active Control™
• Widescreen Plus
• Picture Freeze
Miscellaneous
• Mains: AC 110V ± 10%
• Power consumption: Normal operation: 233W
Standby: <1W
• Input and output jacks (see page 7)
• Product dimensions (d x w x h)
62PL9774: 18.2” x 67.3” x 43.3”
55PL9774: 17.4” x 56.6” x 38.1”
• Product weight (excluding packaging)
62PL9774: 125 lbs
55PL9774: 95.5 lbs
• Universal remote control: RC4305, universal RC managing TV and
accessory devices
Sound
Supporting Features
•
•
•
•
•
•
Sound system: Hi-fi Stereo
Virtual Dolby* Surround processing
Output: 2 x 20W RMS at 2% distortion
Frequency response: 20Hz–15kHz, +1/-3dB (ampl.)
Loudspeaker configuration: two 2”/two 5”
Control:Volume, 5-band Audio Equalizer Controls (with adjustments
at 120Hz, 500Hz, 1.5KHz, 5KHz, and 10KHz), Balance, AVL (on/off),
and Headphone (volume, balance)
• Subwoofer out
•
•
•
•
•
•
•
•
•
•
Operation
• Easy, menu-driven installation and operation; direct-access menus
and cursor control
• Selection of three menu languages: English, French, and Spanish
• On-screen status display on programs and functions (on screen
display)
• Sleeptimer
• Favorite channel listing
• AutoLock™ to protect children from objectionable programming
with V-chip technology
• Closed Captioning
• AutoPicture™ control: Soft, Natural, Rich, Multimedia, Personal
• AutoSound™ control: Movie, Speech, Music, Personal
• Eight widescreen modes: Automatic, Super Zoom, Panoramic, 4:3,
Movie Expand 14:9, Movie Expand 16:9, 16:9 Subtitle, and Wide
Screen
Digital Color Transient Improvement (CTI)
Picture Freeze
Auto Aspect Ratio Adaptation
Incredible Surround™
Automatic Volume Leveler (AVL)
Independent headphone volume control
Easy Tune™ (auto search, auto tune, auto install)
Alternate channel
AutoSurf™
Low-power standby (<1W)
Supplied Accessories
• Remote control with two “AA” size batteries
Design and specifications are subject to change without notice.
Parts that will need to be replaced at some point during the life of the product:
• Philips TV inlet filter assembly: part number 3135 037 51810
• Philips TV lamp: part number 3122 438 71310.
To order the parts, contact the Philips Customer Care Center at 1-800-531-0039.
*Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
AutoLock and Easy Tune are trademarks of Philips Consumer Electronics. Copyright 2004 Philips Consumer Electronics. All rights reserved.
75
Index
A
F
S
Active Control™ Plus, 28
Active Control™ Plus Window, *Q5
Active Standby Window, *Q5
Alternate Audio (SAP) Control, 42
Antenna Attenuator, 56
Audio/Video Input Sources, Labeling, 19
AutoPicture™ Options, 34
AutoSound™ Options, 46
AVL (Auto Volume Leveler), 44
AV5 Clock Frequency and Phase, Adjusting, 15
Factory Default Setting, 60
Safety Information/Instructions, *Q1,*Q2, 2,
3, 9
SAP (See Alternate Audio [SAP] Control)
Service (See Factory Service Locations)
Signal Splitter, *Q4, 8, 11
Sleeptimer, 48
Sound Mode Options, 41
Specifications, Product, 75
Stand (Optional), Mounting, *Q3
Stereo, Selecting, 43
Subwoofer
Output Jack, 7–8, 17
Control (in on-screen menu), 17
Surf Options, 54
Surround Sound (See Connections and Sound
Mode Options)
S-Video Input Jacks, 7–8, 12
Swivel (Optional), Mounting, *Q2
B
Blocking Programs
Based on TV Ratings, 54
Based on Movie Ratings, 55
C
Cabinet
Buttons, *Q5
Windows, *Q5
Channel List, 50
Channels, Programming into the TV’s
Memory, *Q8
Cleaning the TV, 68
Closed Captioning, 47
Color Enhancement, 33
Connections
Camcorder, 16
Computer, 14
HD Satellite Receiver to DVI, 16
HD Satellite Receiver to YPbPr, 15
Progressive-scan DVD Player, 14
Standard DVD Player, 13
Surround Sound, 17
S-Video, 12
VCR, 10
VCR and Cable Box, 11
Video Game System, 18
D
Daylight Savings, Setting, 66
Delta Volume, 45
Digital Processing Options, 30
Dolby** Virtual (See Sound Mode Options)
Dual Screen Format
Changing Channels or Input Sources, 59
Selecting, 58
DVI Input Jack, 7–8, 14
Dynamic Contrast Options, 31
Dynamic Noise Reduction Options, 32
Factory Service Locations, 77–78
Features, List of, 5
Filters, Cleaning or Replacing, 69
H
Headphone Volume, Adjusting, 37
I
Incredible Surround™ (See Sound Mode
Options)
J
Jacks/Cables/Connectors, Descriptions, 7
L
Lamp
Replacing, 70-71
Resetting the Lifetime Counter, 72
Lamp Lifetime Counter, 72
Lamp Rating Control, 72
Language, Setting for the On-screen
Menu, *Q8
Lock After, 53
Lock Channel, 52
Loudness Control, 40
O
On-screen Displays Options, 61
On Timer, 49
Overheating, Preventing, *Q1-2, 9, 69
T
Time Zone, Selecting, 66
Troubleshooting, 73–74
Tuner (RF) Input Jack, *Q3–5, 7–8
TV Equalizer Options, 38
TV Signals
Information on, 6
Ways of Receiving, 6
TV Speaker Balance, 39
Twin-lead Adapter, 8
V
Video Game System (See Connections)
P
Panel Jacks, Compatibility Information, 7–8
Panning the Screen (with Cursor Buttons),
*Q6, 16, 35
Picture Controls, 29
Picture Format Options, 35–36
PIN, Setting up or Changing, 62
PIP, 58
Power Surges, Protecting Against, 9
Pre-connection Recommendations, 9
Product End of Life Disposal, 5
Volume, Adjusting
Headphone, 37
TV, 35
W
Warranty, 80
Welcome, 2
Y
YPbPr Input Input Jacks, 7–8, 13–15
R
Remote Control
Programming, 20–22
Using with the TV, *Q6
Using with Accessory Devices, 22–27
Remote Sensor Window, *Q5
RGB+HV Input Jack, 7–8, 14
*Q refers to the Quick Use and Setup Guide that came with your TV.
**Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
76
Notes
77
Notes
78
Notes
79
Limited Warranty
PHILIPS TELEVISION
One Year Free Labor
One Year Free Service on Parts
30 days Free Service on Television Screen
This product can be repaired in-home.
WHO IS COVERED?
MAKE SURE YOU KEEP...
You must have proof of purchase to receive warranty service. A sales
receipt or other document showing that you purchased the product is
considered proof of purchase.
Please keep your sales receipt or other document showing proof of
purchase. Attach it to this owner’s manual and keep both nearby.
Also keep the original box and packing material in case you need to
return your product.
WHAT IS COVERED?
BEFORE REQUESTING SERVICE...
Warranty coverage begins the day you buy your product. For one year
thereafter (30 days for the TV screen), all parts will be repaired or
replaced, and labor and transportation are free. After one year from the
day of purchase, you pay for the replacement or repair of all parts and
for all labor and transportation charges.
All parts, including repaired and replaced parts, are covered only for
the original warranty period. When the warranty on the product
expires, the warranty on all replaced and repaired parts also expires.
Please check your owner’s manual before requesting service.
Adjustments of the controls discussed there may save you a service call.
TO GET WARRANTY SERVICE...
Repair must be performed by an authorized service center or a factory
service center. If you do not live near a factory service center, contact
your dealer. If your dealer is an authorized service center, he will
arrange repair. If your dealer is not an authorized service center, he
will direct you to the authorized service center engaged by him to
service the products he sells.
WHAT IS EXCLUDED?
Your warranty does not cover:
• labor charges for installation or setup of the product, adjustment of
customer controls on the product, and installation or repair of
antenna systems outside of the product.
• product repair and/or part replacement because of misuse, accident, unauthorized repair or other cause not within the control of
Philips Consumer Electronics Company.
• reception problems caused by signal conditions or cable or antenna
systems outside the unit.
• a product that requires modification or adaptation to enable it to
operate in any country other than the country for which it was
designed, manufactured, approved and/or authorized, or repair of
products damaged by these modifications.
• incidental or consequential damages resulting from the product.
(Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. This
includes, but is not limited to, prerecorded material, whether copyrighted or not copyrighted.)
• a product used for commercial or institutional purposes.
(In U.S.A., Puerto Rico and U.S. Virgin Islands, all implied warranties,
including implied warranties of merchantability and fitness for a particular
purpose, are limited in duration to the duration of this express warranty.
But, because some states do not allow limitations on how long an implied
warranty may last, this limitation may not apply to you.)
(In Canada, this warranty is given in lieu of all other warranties. No
other warranties are expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose. Philips is
not liable under any circumstances for any direct, indirect, special, incidental or consequential damages, howsoever incurred, even if notified
of the possibility of such damages.)
IF YOU HAVE QUESTIONS...
Please contact Philips at:
1-888-PHILIPS, if calling from the USA (English or Spanish Speaking)
1-800-661-6162, if calling from Canada (French Speaking)
1-888-PHILIPS, if calling from Canada (English or Spanish Speaking).
WHERE IS SERVICE AVAILABLE?
REMEMBER...
Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics Company. In countries where Philips Consumer Electronics Company does not distribute
the product, the local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare
parts and technical manual(s) are not readily available).
Please record below the model and serial numbers found on the product. Also, please fill out and mail your warranty registration card
promptly. It will be easier for us to notify you if necessary.
MODEL # ________________________________________________
SERIAL #
________________________________________________
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Philips Consumer Electronics, P.O. Box 520890, Miami, FL 33152
80