Philips DVP 3026K User's Manual

Quick Start Guide
DVP 3026K
DVD Video Player
What’s in the box?
DVD Video Player
DVP3026K
DVP3026K
Video cable
(yellow plug)
Quick Start Guide
Connect
1
Audio cables
(red & white plugs)
Remote Control
and 2 AAA batteries
User Manual
Basic Connection
A Audio/Video connection to TV
A Use the supplied composite video cable (yellow plug)
To Video In
socket on the TV
To Audio In
socket on the TV
VIDEO OUT
(CVBS)
VIDEO IN
(CVBS)
to connect the DVD player’s Video Out (CVBS)
socket to the Video In socket (or labeled as A/V In,
Video In, Composite or Baseband) on the TV.
B To hear the sound of this DVD player from the TV,
use the supplied audio cables (red and white plugs)
to connect {FRONT L/R} sockets of the DVD player
to the corresponding Audio In sockets on the TV.
C Plug in the power cable from the DVD player to an
AC power outlet.
Note See the accompanying user manual for other
possible connections (e.g. Component Video).
VIDEO IN
(CVBS)
From Video Out
socket on the
DVD Player
1_dvd3026K_qsg_93_eng1.indd 1
From Front Out
sockets on the
DVD player
2005-12-01 3:05:14 PM
2
A
Set up
Finding the viewing channel
A Press 2 on the DVD player’s remote control.
B Switch on the TV.
C Press SETUP on the DVD player’s remote control.
3
A
Enjoy
Start playback
A Playback may start automatically when a disc has
been loaded in the disc tray.
Note If a disc menu appears on the TV:
1)
Press S T W X to scroll through the options
available in the DVD menu.
2)
Press PLAY/PAUSE XÅ on the option you
want to start playback
- - General Setup Page - Disc Lock
Display Dim
Program
OSD Language
Sleep
B Press PLAY/PAUSE XÅ to
start playback.
Go to General Setup Page
C To stop playback, press
D Press ‘0’ on the TV’s remote control, then repeatedly
press the Channel Down button until you see the
DVD background screen. This is the correct viewing
channel for the DVD player.
Note For some TVs, to find the correct viewing
channel, you can keep pressing the AV or SELECT
buttons, If still unable to find the correct viewing
channel, check the connections again or check your
TV’s user manual.
B
Language preference setup
Use the DVD player’s remote control to select the
desired On-screen language, Audio language, Subtitle
language and Menu language you preferred.
Selecting On-screen language
A Press X to select {General Setup Page}.
B Press S T to highlight {OSD Language}, then press X.
- - General Setup Page - Disc Lock
Display Dim
Program
OSD Language
Sleep
ENGLISH
FRANÇAIS
DEUTSCH
NEDERLANDS
STOP Ç.
D Press DISC MENU to go
back to the disc menu
anytime.
Troubleshooting
For more troubleshooting tips, see the user
manual.
No power
• Check if the AC power cord is properly connected.
• Press the STANDBY-ON on the front of the DVD
player to turn on the power.
No picture
• Check connection to TV and ensure the plugs are
firmly in place.
No sound or distorted sound
• Adjust the volume
• Check audio connections are in the correct input
source.
Set OSD Language English
C Press S T to select a language and press OK.
Note The On-screen language for the setup menu will
remain once you set it, regardless of various disc
languages.
Remote control does not work
• Check the batteries are loaded correctly or replace the
batteries with new ones.
• Reduce the distance between the remote control and
the DVD player.
• Point the remote control directly toward the IR
sensor.
Need help?
User Manual
For more product information refer to the user manual of the DVD player
Online
Go to www.philips.com/support
2005 C Koninklijke Philips N.V.
All rights reserved.
www.philips.com
SL/0548/93_02
1_dvd3026K_qsg_93_eng1.indd 2
2005-12-01 3:05:26 PM