Philips Magnavox 46MF440B/F7 User's Manual

Owner’s manual
Manuel du propriétaire
Manual del propietario
46MF460B
46MF440B
LCD TV
English
Français
1-866-341-3738
1-866-341-3738
Español
1-866-341-3738
Guía d Us
Uso
so R
Rááp
MODEL NUMBER
A01QBUF_46MF460BF7_EN_v1.indd 1
SERIAL NUMBER
2010/04/30 15:04:21
Return your Product Registration Card or register online at
www.magnavox.com/support today to get the very most from your purchase.
Registering your model with MAGNAVOX makes you eligible
g for all of the valuable benefits listed below, so don’t miss out.
Complete and return your Product Registration Card at once, or register online at www.magnavox.com/supportt to ensure:
*Proof of Purchase
*Product Safety
Notification
*Additional Benefits
Returning the enclosed card
guarantees that your date of purchase
will be on file, so no additional
paperwork will be required from you
to obtain warranty service.
By registering your product, you’ll
receive notification directly from
the manufacturer - in the rare
case of a product recall or safety
defect.
Registering your product
guarantees that you’ll receive all
of the privileges to which you’re
entitled, including special
money-saving offers.
Know these safety symbols
Congratulations on your purchase,
and welcome to the “family!”
Dear MAGNAVOX product owner:
Thank you for your confidence in
MAGNAVOX. You’ve selected one of the
best-built, best-backed products available today.
We’ll do everything in our power to keep you happy
with your purchase for many years to come.
As a member of the MAGNAVOX “family,” you’re
entitled to protection by one of the most
comprehensive warranties and outstanding service
networks in the industry. What’s more, your
purchase guarantees you’ll receive all the
information and special offers for which you qualify,
plus easy access to accessories from our convenient
home shopping network.
Most importantly, you can count on our
uncompromising commitment to your total
satisfaction.
All of this is our way of saying welcome - and
thanks for investing in a MAGNAVOX product.
P.S.To get the most from your MAGNAVOX
purchase, be sure to complete and return your
Product Registration Card at once or register
online at:
www.magnavox.com/support
This “bolt of lightning” indicates
uninsulated material within your unit
may cause an electrical shock. For the safety
of everyone in your household, please do not
remove product covering.
The “exclamation point” calls attention to
features for which you should read the
enclosed literature closely to prevent operating
and maintenance problems.
WARNING : To reduce the risk of fire or
electric shock, this apparatus should not be
exposed to rain or moisture and objects filled
with liquids, such as vases, should not be
placed on this apparatus.
CAUTION : To prevent electric shock, match
wide blade of plug to wide slot, fully insert.
ATTENTION : Pour éviter les choc électriques,
introduire la lame la plus large de la fiche dans
la borne correspondante de la prise et pousser
jusqu’au fond.
For Customer Use
Enter below the Serial No. which is located
on the rear of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
Visit our World Wide Web Site at www.magnavox.com/support
2
EN
LC8(LCD)_master draft_EN_v1.indd 2
2010/02/09 21:15:53
English
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any of the ventilation openings.
Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and third grounding prong. The wide blade or third
prong are provided for your safety. When the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Damage Requiring Service - The appliance should be
serviced by qualified service personnel when:
A. The power supply cord or the plug has been damaged;
B. Objects have fallen, or liquid has been spilled into the
appliance;
C. The appliance has been exposed to rain
D. The appliance does not appear to operate normally or
exhibits a marked change in performance;
E. The appliance has been dropped, or the enclosure damaged.
16. Tilt/Stability - All televisions must comply with recommended
international global safety standards for tilt
and stability properties of its cabinet design.
• Do not compromise these design standards by applying
excessive pull force to the front, or top, of the cabinet
which could ultimately overturn the product.
• Also, do not endanger yourself, or children, by placing
electronic equipment/toys on the top of the cabinet. Such
items could unsuspectingly fall from the top of the set and
cause product damage and/or personal injury.
17. Wall or Ceiling Mounting - The appliance should be
mounted to a wall or ceiling only as recommended by the
manufacturer.
18. Power Lines - An outdoor antenna should be located
away from power lines.
19. Outdoor Antenna Grounding - If an outside antenna
is connected to the receiver, be sure the antenna system is
grounded so as to provide some protection against voltage
surges and built up static charges.
Section 810 of the National Electric Code, ANSI/NFPA
No. 70-1984, provides information with respect to proper
grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of
grounding connectors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for
the grounding electrode. See Figure below.
20. Object and Liquid Entry - Care should be taken so
that objects do not fall and liquids are not spilled into the
enclosure through openings.
21. Battery Usage CAUTION - To prevent battery
leakage that may result in bodily injury, property damage,
or damage to the unit:
• Install all batteries correctly, with + and - aligned as
marked on the unit.
• Do not mix batteries (old and new or carbon and
alkaline, etc.).
• Remove batteries when the unit is not used for a long
time.
Note to the CATV system installer : This reminder is provided to call the CATV system installer’s attention to Article
820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall
be connected to the grounding system of the building, as close to the point of cable entry as practical.
Example of Antenna Grounding as
per NEC - National Electric Code
GROUND CLAMP
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
GROUNDING CONDUCTORS (NEC SECTION 810-21)
GROUND CLAMPS
ELECTRIC SERVICE EQUIPMENT
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
3
EN
LC8(LCD)_master draft_EN_v1.indd 3
2010/02/09 21:15:55
FCC WARNING
This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference
unless the modifications are expressly approved in the manual. The user could lose the authority to operate this apparatus if an
unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This apparatus
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this apparatus does cause harmful interference to radio or television reception, which can be determined by turning the apparatus off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the apparatus and receiver.
3) Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
DECLARATION OF CONFORMITY
Trade Name: MAGNAVOX
Model: 46MF460B / 46MF440B
Responsible Party: FUNAI CORPORATION, Inc.
Address: 19900 Van Ness Avenue, Torrance, CA 90501 U.S.A.
Telephone Number: 1-866-341-3738
This Class B digital apparatus complies with Canadian ICES-003. Standard Television Receiving Apparatus, Canada BETS-7 / NTMR-7
CAUTION : Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING : Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.
This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided.
Make sure to leave a space of 4 inches (10cm) or more around this apparatus.
WARNING: To prevent injury, this apparatus must be securely attached to the wall in accordance with the instructions.
Like all LCD products, this set contains a lamp with Mercury, please dispose of according to all Local, State and
Federal laws. For the disposal or recycling information, contact:
www.mygreenelectronics.com or www.eiae.org
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or
climbing on it. A falling unit can cause serious injury or even death.
NOTE ABOUT RECYCLING
• This unit’s packaging materials are recyclable and
•
can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
Batteries should never be thrown away or
incinerated but disposed of in accordance with your
local regulations concerning chemical wastes.
Trademark Information
•
HDMI, the HDMI Logo, and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
•
Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
•
The American Academy of Pediatrics discourages television
viewing for children younger than two years of age.
WHEN CARRYING THIS UNIT
• At least 2 people are required when
•
carrying this unit.
Make sure to hold the upper and bottom
frames of the unit firmly as illustrated.
TO AVOID THE HAZARDS OF
ELECTRICAL SHOCK AND FIRE
• Do not handle the AC power cord with wet hands.
• Do not pull on the AC power cord when disconnecting it from an
•
AC outlet. Grasp it by the plug.
Do not put your fingers or objects into the unit.
LOCATION AND HANDLING
• Do not install the unit in direct sunlight or in a place subject to
•
•
•
•
4
dust or strong vibration.
Avoid a place with drastic temperature changes.
Install the unit in a horizontal and stable position. Do not place
anything directly on top or bottom of the unit. Depending on
your external devices, noise or disturbance of the picture and / or
sound may be generated if the unit is placed too close to them.
In this case, please ensure enough space between the external
devices and the unit.
Depending on the environment, the temperature of this unit may
increase slightly. This is not a malfunction.
Be sure to unplug the AC power cord from the AC outlet before
carrying the unit.
EN
A01QBUF_46MF460BF7_EN_v1.indd 4
2010/05/07 15:42:55
English
Features
Contents
3
4
INTRODUCTION
5
6
6
6
6
7
7
8
8
PREPARATION
9
9
10
14
14
15
WATCHING TV
16
16
16
16
17
17
18
18
18
Main Menu
Autoprogram
Channel List
Add Channels
Antenna Confirmation
Language Selection
Picture Adjustment
Sound Adjustment
Closed Caption
Child Lock
Fun-Link
Energy Saving Mode
Location
120Hz Clear Pix Engine Demonstration Mode
Current Software Info
MP3 / JPEG Playback
19
19
20
20
21
21
22
22
24
27
29
30
30
30
30
31
TROUBLESHOOTING
Troubleshooting Guide
FAQ
32
34
INFORMATION
Glossary
Maintenance
General Specifications
Electrical Specification
Other Specifications
Limited Warranty
35
35
36
36
36
37
INFORMATION
OPTIONAL SETTING
TROUBLESHOOTING
Sleep Timer
Switching Each Input Mode
Freeze Mode
Channel Selection
TV Screen Display Mode
Sound Functions
TV Screen Information
Reducing the Brightness
Fun-Link Options
OPTIONAL SETTING
Antenna Connection
Connection to Cable Receiver or Satellite Box
External Device Connection
Cable Management
Plug In the AC Power Cord
Initial Setup
WATCHING TV
Features
Supplied Accessories
Symbols Used in this Manual
Attaching the Base
Fixing the Unit on Your Furniture
Control Panel
Terminals
Remote Control Function
Installing the Batteries
PREPARATION
Important Safety Instructions
Trademark Information
• DTV /TV / CATV
You can use your remote control to select channels which
are broadcast in digital format and conventional analog
format. Also, cable subscribers can access their cable TV
channels.
• Information Display (ATSC only)
You can display the title, contents and other information of
the current DTV program on the TV screen.
• Autoprogram
This unit automatically scans and memorizes channels
available in your area, eliminating difficult setup procedures.
• Child Lock
This feature allows you to block children’s access to
inappropriate programs.
• Closed Caption Decoder
Built-in closed caption decoder displays text for closed
caption supported programs.
• MTS / SAP Tuner
Audio can be selected from the remote control.
• Auto Shut Off Function
If there is no input signal and no operation for 15 minutes,
the unit will turn off automatically.
• Sleep Timer
This feature will automatically turn off the power of the unit at
a specific time.
• Choices for On-screen Language
Select your on-screen language:
English, Spanish or French.
• Stereo Sound Function
• PLL Frequency Synthesized Tuning
Provides free and easy channel selection and lets you tune
directly to any channel using the number and decimal point
"•" buttons on the remote control.
• Various Adjustment for Picture and Sound
Customizes image quality suitable for your room and sets
your sound preference.
• Fun-Link via HDMI Link
(HDMI Cable not Included)
Fun-Link allows your other HDMI link devices (such as
Magnavox DVD) to be controlled by the HDMI cable
connected to your TV.
• 120Hz Clear Pix Engine
This feature activates a 120Hz Clear Pix Engine drive
using 120 frames per second resolution to enhance the
smoothness of fast moving pictures and reduce blur in the
picture.
• HDMI Input
When using HDMI1 Input, you can enjoy this unit as a PC
monitor if your PC has a DVI output terminal.
• Component Video Input
• S-Video Input
• AV Input
• USB Terminal
The MP3 music and the JPEG picture files stored on a USB
flash memory device can be played back on this unit.
• Digital Audio Output
• Analog Audio Output
INTRODUCTION
INTRODUCTION
© 2010 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied,
transmitted, disseminated, transcribed, downloaded or stored in any storage
medium, in any form or for any purpose without the express prior written
consent of Funai. Furthermore, any unauthorized commercial distribution of this
manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Funai
reserves the right to change the content herein without the obligation to
notify any person or organization of such changes.
with the
design is a registered trademark of Funai Electric Co.,
Ltd. and may not be used in any way without the express written consent
of Funai. All other trademarks used herein remain the exclusive property
of their respective owners. Nothing contained in this manual should be
construed as granting, by implication or otherwise, any license or right to
use any of the trademarks displayed herein. Misuse of any trademarks or
any other content in this manual is strictly prohibited. Funai shall aggressively
enforce its intellectual property rights to the fullest extent of the law.
5
EN
LC8(LCD)_master draft_EN_v1.indd 5
2010/02/09 21:15:57
Supplied Accessories
Owner’s manual
(1EMN26819)
Quick Start
(1EMN25860)
Attaching the Base
You must attach the base to the unit to have it as a table top
unit. Be sure the front and rear of the base match the proper
direction.
1
Remote control
(NF804UD)
Registration card
(1EMN25026 )
AC power cord
(WAV0162LW001) or
(WAV0162LTE03) or
(WAV152ZHN001)
Batteries
(AAA, 1.5V x 2)
AAA
Screw kit
for attaching the base
(1ESA24365)
A
AA
2
3
Spread a thick and soft
cloth over a table as
shown.
Place the main unit face
up onto it. Make sure not
to damage the screen. At
least 2 people are required
for this step.
Insert 2 hooks under the
bottom of the main unit
into base holes. (shown by
arrow ➀), then move the
base in the direction as
shown by arrow ➁ until it
stops and the 6 mounting
holes are aligned.
Drive Phillips head screws
into the 6 threaded holes
at the bottom of the base
until they are tight.
To remove the base from this unit
• Unscrew the Phillips head screws on step 3.
After the screws are removed, move the base in the opposite direction as
shown by arrow ➁ on step 2, then pull the base up toward the front of the
unit. Be careful not to drop the base when you remove it.
Note
•
If you need to replace these accessories, please refer
to the part No. with the illustrations and call our toll
free customer support line found on the cover of this
manual.
Note
• If you lose the screws, please purchase M5×12 Phillips head screws at your
• When attaching the base, ensure that all screws are tightly fastened. If the
•
•
•
base is not properly attached, it could cause the unit to fall, resulting in
injuries as well as damage to the unit.
Make sure to use a table which can support the weight of this unit and is
larger than this unit.
Make sure the table is in a stable location.
When attaching the base, ensure that FRONT ↑ written on the base is
upward. If it's not upward, the 2 hooks don't fit in the base.
local store.
Fixing the Unit on Your Furniture
Symbols Used in this Manual
Screw this unit on your furniture tightly using wood screws
(not supplied) in the 2 holes at the back of the base as shown.
• Recommended screw dimension : 5.1 x 20 mm
The following is the description for the symbols used in
this manual. Description refers to:
•
ATSC
: Digital TV operation
NTSC
: Analog / Cable TV operation
rear of this unit
If neither symbol appears, the operation is applicable to
both.
Note
• When you remove this unit make sure to unscrew the wood screws from
your Wood Stand, Furniture and other wood item.
6
EN
A01QBUF_46MF460BF7_EN_v1.indd 6
2010/05/07 15:57:45
English
1 VOLUME + / -
1
3
➠
➠
p.19
p.16
➠
p.15
Press to adjust the volume or
move right (+) / left (–) through the main menu items.
2 MENU
3 CHANNEL + / -
Press to select channels or
move up (+) / down (–) through the main menu items.
4 POWER
5 Infrared sensor window
Receives infrared rays transmitted from the remote
control.
6 POWER indicator
WATCHING TV
4
5
6
7
p.17
PREPARATION
2
➠
INTRODUCTION
Control Panel
Lights up green when power is on.
7 STAND BY indicator
Lights up red when power is off.
8
9
Side Panel
8 HDMI 3 Input jack
9 USB terminal
➠
➠
OPTIONAL SETTING
Terminals
p.9, 10
p.14
Use this terminal only to play back the MP3 music and
the JPEG picture files stored on a USB flash memory
device, or when software update is needed.
TROUBLESHOOTING
10 S-Video / Composite Video /Audio (L/R)
Input jacks for VIDEO2
➠ p.11, 12
10
13
14
15
16
17
18
19
20
Note for USB terminal
• User should not connect any devices to the USB terminal such as digital
camera, keyboard, mouse, etc. (because these will not work).
• The software update is, in most cases, handled by an authorized service
person or in some circumstances the user may be asked to do the software
update themselves.
➠
➠
➠
➠
p.14
p.14
p.9, 10
p.9, 10, 13
INFORMATION
11
12
Rear Panel
11 Cable management
12 AC powerr Inlet
13 HDMI 2 Input jack
14 HDMI 1 Input jack
HDMI connection for HDMI or DVI device.
When you connect your PC that has a DVI terminal,
you can enjoy this unit as a PC monitor.
15 Antenna Input jack
➠ p. 9
16 S-Video / Composite Video /Audio (L/R)
Input jacks for VIDEO1
➠ p.11, 12
17 Component Video and Audio (L/R) Input jacks
➠ p. 9, 11
18 Digital Audio Output jack
➠ p.12
19 Audio (L/R) Output jacks
➠ p.12
20 Audio (L/R) Input jacks for HDMI 1
➠ p.10, 13
Audio cable connection from a DVI device.
When you connect your PC that has a DVI terminal,
use a stereo mini plug conversion cable as well.
(For HDMI 1 Input jack only)
7
EN
A01QBUF_46MF460BF7_EN_v1.indd 7
2010/05/06 13:39:09
Remote Control Function
1
(power)
2 SAP
3 SOURCE
1
2
3
10
11
12
4
5
13
6 ▲/▼/◄/►(cursor)
7 BACK
Press to return to the previous menu operation.
➠ p.17
9 PREV CH
➠ p.16
Press to return to previously viewed channel.
➠ p.16
➠ p.17
10 SLEEP
14
15
16
8
➠ p.15
➠ p.15
➠ p.18
5 OK
8 VOL + / −
6
7
4 FREEZE
Press to freeze screen image.
➠ p.15
➠ p.17
➠ p.16
➠ p.16
17
18
19
9
20
11 FORMAT
Press to select aspect
p
ratio available for the TV screen.
12 RED / GREEN / BLUE / YELLOW
➠ p.29
Functionallyy useful for Fun-Link.
13 MENU
➠ p.19
14 INFO
➠ pp.18
15 REV E / FWD D
➠ p.29
Press to search backward or forward through the disc.
PLAY B
➠ p.29
Press to begin the disc playback.
SKIP H / SKIP G
➠ p.29
Press to skip backward or forward chapters, titles or
tracks of the disc.
PAUSE F
➠ p.29
Press to pause the disc playback.
STOP C
➠ p.29
Press to stop
p the disc playback.
p y
16 MUTE
➠ p.17
17 CH + / −
18 ECO
Press to reduce the brightness.
➠ p.16
➠ p.18
19 Number buttons
➠ p.16
(dot)
•
Press to shift the subchannel from the main channel.
When using a universal remote control to operate this unit.
• Make sure the component code on your universal remote control is set
•
to our brand. Refer to the manual accompanying your remote control for
more details.
We do not guarantee 100% interoperability with all universal remote
controls.
Note
• Buttons in gray background (
•
) are not available unless you are
connected to devices that are compatible with Fun-Link function.
We do not guarantee 100% interoperability with other brands of HDMI link
compliant devices.
20 FUN-LINK OPTIONS
➠ p.18, 29
Press to call up various menu from your Fun-link device
connected through an HDMI cable.
Installing the Batteries
Install the batteries (AAA, 1.5V x 2) matching the polarity
indicated inside battery compartment of the remote control.
Battery Precautions:
• Be sure to follow the correct polarity as indicated in the battery
•
•
•
A
AA AAA
compartment. Reversed batteries may cause damage to the device.
Do not mix different types of batteries together (e.g. Alkaline and
Carbon-Zinc, or rechargeable batteries like ni-cad, ni-mh, etc) or old
batteries with fresh ones.
If the device is not to be used for a long period of time, remove the
batteries to prevent damage or injury from possible battery leakage.
Do not try to recharge batteries; they can overheat and rupture.
8
EN
LC8(LCD)_master draft_EN_v1.indd 8
2010/02/09 21:16:09
English
No supplied cables are used with these connections:
Before you connect:
Use an HDMI or component video cables to connect the
HDMI or the Component Video Input jacks of the unit to
the HDMI or the component video output jacks of the cable
receiver / satellite box.
If you connect to the unit’s Component Video Input jacks,
connect audio cables to the Audio L/R Input jacks right beside
the Component Video connector.
PREPARATION
Please purchase the necessary cables at your local store.
Use an HDMI cable with the HDMI logo (a certified HDMI cable).
High Speed HDMI cable (also known as HDMI category 2
cable) is recommended for the better compatibility.
Connection to Cable Receiver or
Satellite Box
INTRODUCTION
PREPARATION
e.g.)
Be sure your antenna or other device is connected properly
before plugging in the AC power cord.
satellite dish
or
RF coaxial cable
WATCHING TV
Antenna Connection
ANT IN
Connect the RF coaxial cable on your home outlet to the
antenna input jack of this unit.
e.g.)
HDMI OUT
cable receiver /
satellite box
STEREO
PCM
AUDIO OUT
L
R
or
RF coaxial cable
COMPONENT VIDEO OUT
Y
Pb/Cb
Pr/Cr
(green)
or
OPTIONAL SETTING
cable TV signal
including PPV
VHF / UHF
analog
or
DTV antenna
(blue)
b
(red)
d
HDMI cable
TROUBLESHOOTING
cable TV signal
or
component video cables
((red
d / bl
blue / green)) and audio
cables
or
INFORMATION
rear of this unit
side or rear of
this unit
Once connections are completed, turn on the unit and begin initial
setup. Channel scanning is necessary for the unit to memorize all
available channels in your area. [Initial Setup] ➠ p.15
Note
• If you have any question about the DTV’s antenna, visit www.antennaweb.
org for further information.
• Depending on your antenna system, you may need different types of
•
•
•
•
combiners (mixers) or separators (splitters). Contact your local electronics
store for these items.
For your safety and to avoid damage to this unit, please unplug the RF
coaxial cable from the antenna input jack before moving the unit.
If you did use an antenna to receive analog TV, it should also work for DTV
reception. Outdoor or attic antennas will be more effective than a set top
or inside antenna.
To switch your reception source easily between antenna and cable, install an
antenna selector.
If you are not receiving a signal from your cable service, contact the Cable
provider.
You can also connect this unit to the cable receiver or satellite box
other than the HDMI or the component video output jacks because
they might have different output jacks.
Required cables and connecting methods of the cable receiver /
satellite box, or the availability channel for the clear QAM may differ
depending on the cable / satellite provider. For more information,
please contact your cable / satellite provider.
9
EN
A01QBUF_46MF460BF7_EN_v1.indd 9
2010/05/07 15:43:01
External Device Connection
HDMI-DVI Connection
Use an HDMI-DVI conversion cable to connect the unit to
external video devices equipped with DVI output jack.
HDMI Connection
HDMI connection offers the highest picture quality.
HDMI (High-Definition Multimedia Interface) transports high definition
video and multi-channel digital audio through a single cable.
e.g.)
cable receiver or satellite box
with the DVI output jack
e.g.)
BD/DVD recorder
with the HDMI output jack
AUDIO OUT
L
R
STEREO
PCM
HDMI OUT
TITLE
5
CHAPTER 15
REPEAT A-B
DVI OUT
HDMI cable
HDMI-DV
HDMI-DVI
conversion cable
or
To HDMI1
Input jack only
or
rear of this unit
side or rear of this unit
audio cables
Note
For HDMI connection
• The unit accepts 480i, 480p, 720p,, 1080i and 1080p 24/30/60Hz of video
signals, and 32kHz, 44.1kHz and 48kHz of audio signals.
• This unit accepts only 2 channel audio signal (LPCM).
• You need to select "PCM" for the digital audio of the device you connected
or check the HDMI audio setting. There may be no audio output if you
select "Bitstream", etc.
This unit accepts only signals in compliance with EIA861.
•
For HDMI-DVI connection
• The unit accepts 480i, 480p, 720p,, 1080i and 1080p video signals.
• HDMI-DVI connection requires separate audio connections as well and the
audio signals are converted from digital to analog.
• DVI does not display 480i image which is not in compliance with EIA/
CEA-861/861B.
10
EN
A01QBUF_46MF460BF7_EN_v1.indd 10
2010/05/07 15:43:03
English
S-Video Connection
Component Video connection offers better picture quality for
video devices connected to the unit.
If you connect to the unit’s Component Video Input jacks,
connect audio cables to the Audio L/R Input jacks right beside
the Component Video connector.
S-Video connection offers good picture quality for video
devices connected to the unit. If you connect to the unit’s
S-Video Input jack, connect audio cables to the Audio L/R
Input jacks right beside the Composite Video connector.
e.g.)
PREPARATION
BD/DVD recorder, camcorder and
VCR with the S-Video output jack
e.g.)
BD/DVD recorder with
the component video output jack
TITLE
5
CHAPTER 15
REPEAT A-B
COMPONENT VIDEO OUT
Y
Pb/Cb
Pr/Cr
TITLE
5
CHAPTER 15
REPEAT A-B
(green)
ree
(blue)
b
INTRODUCTION
Component Video Connection
VIDEO2
S-VIDEO
OUT
(red)
red
d
AUDIO OUT
L
R
or
AUDIO OUT
L
R
WATCHING TV
AUDIO OUT
L
R
S-VIDEO
OUT
component
ne video cables
(red
(red
d / bl
blue / green)
g
)
S-Video
cable
audio cables
rear of this unit
• The unit accepts 480i / 480p / 720p and 1080i of video signals for this
audio cables
VIDEO1
connection.
INFORMATION
rear of this unit
S-Video cable
TROUBLESHOOTING
Note
side of this unit
OPTIONAL SETTING
audio cables
11
EN
LC8(LCD)_master draft_EN_v1.indd 11
2010/02/09 21:16:16
Composite Video Connection
Audio Output Connection
Composite Video connection offers standard picture quality
for video devices connected to the unit. If you connect to
the unit’s Composite Video Input jack, connect audio cables
to the Audio L/R Input jacks right beside the Composite
Video connector. When the audio jack of the video device is
monaural, connect an audio cable to the Audio L Input jack.
 Digital (for digital broadcasting only)
If you connect this unit to an external digital audio device,
you can enjoy multi-channel audio like 5.1ch digital
broadcasting sound.
Use a digital audio coaxial cable to connect the unit to
external digital audio devices.
e.g.)
camcorder
 Analog (for both analog and digital broadcasting)
If you connect this unit to an external analog audio device,
you can enjoy stereo (2-channel) audio.
Use audio cables to connect the unit to external analog
audio devices.
video game
e.g.)
STAND-BY
STEREO
VCR
VIDEO2
VIDEO
OUT
AUDIO OUT
L
R
or
AUDIO OUT
L
R
VIDEO
OUT
Dolby Digital
decoder
stereo system
L
DIGITAL AUDIO
COAXIAL IN
AUDIO IN
R
co
composite
omposite
o
vvideo
ideo
o ccable
cab
rear of this unit
audio cables
side of this unit
audio cables
VIDEO1
composite video cable
audio cables
digital audio coaxial cable
rear of this unit
Note
• If you connect to the S-Video Input jack and the Composite Video Input
jack at the same time, the S-Video connection will have priority.
12
EN
A01QBUF_46MF460BF7_EN_v1.indd 12
2010/05/07 15:43:05
English
This unit can be connected to your PC that has a DVI terminal.
Use an HDMI-DVI conversion cable for this connection and it
requires stereo mini plug conversion cables as well.
If you connect this unit to your PC, you can use this unit as a
PC monitor.
PREPARATION
e.g.)
INTRODUCTION
PC Connection
OPTIONAL SETTING
stereo mini plug
conversion cables
DVI OUT
personal computer
HDMI-DVI conversion cable
should be with ferrite core.
WXGA
FHD
Resolution
640 x 480
800 x 600
1,024 x 768
1,280 x 768
1,360 x 768
1,920 x 1,080
Refresh rate
INFORMATION
The following video signals can be displayed:
TROUBLESHOOTING
HDMI-DVI
conversion cable
Format
VGA
SVGA
XGA
WATCHING TV
To HDMI1
Input jack only
o
rear of this unit
60Hz
Other formats or non-standard signals will not be displayed
correctly.
Note
• Please purchase the HDMI-DVI conversion cable that has a ferrite core.
• The following operations may reduce noise.
- Attach a ferrite core to the AC power cord of your PC.
- Unplug the AC power cord and use the built-in battery of your PC.
13
EN
A01Q0_QAUF_EN_v1.indd 13
2010/02/10 16:10:42
USB Flash Memory
Cable Management
This unit offers easy playback MP3 music and JPEG picture files.
Insert the USB flash memory into the USB terminal shown
below. [MP3/JPEG Playback] ➠ p.31
Keep the cables through this holder to avoid tangling them.
side of this unit
rear of this unit
Use the following accessary with this connection:
• AC power cord x 1
Plug In the AC Power Cord
Note
• The USB flash memory is not supplied with this unit.
• Do not use an extension cord between the USB flash memory and the unit.
•
•
•
•
Always insert the USB flash memory to this unit directly.
We do not guarantee the all USB flash memory can be supported on this
unit.
Be sure to keep a backup copy of the original files on your device before
you play them back on this unit. We have no responsibilities for damage or
loss of your stored data.
When you ready to remove a USB flash memory, at first turn off the unit to
avoid any damage for your data and the unit.
If the USB flash memory left behind in the USB terminal and you turn off
the unit, the “USB”(main menu) will appear automatically when you turn on
the unit again.
Make sure that the AC power cord must be plugged to an AC
outlet after all the necessary connections are completed.
rear of this unit
AC power cord
AC outlet
Caution:
• Do not connect the AC power cord to a power supply outside the
indicated voltage of this unit (AC 120V).
Connecting the AC power cord to a power supply outside of this range may
result in fire or electrical shocks.
Note
• Each time you plug in the AC power cord, no operations will be performed
for a few seconds. This is not a malfunction.
14
EN
LC8(LCD)_master draft_EN_v1.indd 14
2010/02/09 21:16:21
English
4
Use ◄/► to select the desired location setting, then
press OK.
Initial Setup
Select “Retail” or “Home” for your location.
Initial Setup
Select
Make sure the unit is connected to antenna or cable.
After making all the necessary connections,
press to turn on the unit.
Use ▲/▼ to select [Antenna] for TV channels or [Cable]
for CATV channels, then press OK.
Note
• If you are not receiving a signal from your cable service, contact the Cable
provider.
• If you press or MENU during autoprogram, this setting will be canceled.
• The initial autoprogram function can be executed for either [Antenna] or
Make sure the antenna is connected to ''ANT. IN'' jack.
Select your signal source.
Antenna
Cable
Initial Setup
Skip
Retry
Antenna
Cable
ANT.IN
OK
OK
BACK
MENU
Back
Skip
[Autoprogram] will begin.
No channel is registered.
Try Autoprogram again?
Verify that you have a cable connected to the "ANT. IN" jack on the back
of the TV, the channel installation process searches this connection. If
you are using a cable or satellite box, please confirm the input which
you have connected the box and press "SOURCE" key on the remote
control to select the appropriate source input.
Select
Initial Setup
OK
OK
MENU
Later
INFORMATION
Select
Or
TROUBLESHOOTING
•
Initial Setup
[Cable] only once. When you change the connection (Antenna / Cable),
set [Autoprogram] again. ➠ p.19
If there is no signal input from the antenna terminal and no operation for
several seconds after you turn on the unit, [Helpful Hints] appears. Follow
the instructions listed on the TV screen.
OPTIONAL SETTING
3
Use ▲/▼ to select the on-screen language from the
choices (English / Español / Français) on the right side of the
TV screen.
OK
Select [Retail] store, the unit will be set up with
predefined setting for retail displays.
• Select [Home], the unit is set to maximize the energy
efficiency for home setting and it can be adjusted
through a choice of picture and sound quality according
to your preference.
• When the initial setup is completed, the lowest
memorized channel with the confirmation message of
the location setting will be displayed on the TV screen.
• It may take a few moments to turn on the unit for the
first time.
• [Initial Setup] menu appears automatically after the
unit is turned on.
2
OK
WATCHING TV
1
Home
Retail
Before you begin:
PREPARATION
This section will guide you through the unit’s initial setting
which includes selecting a language for your on-screen menu
and autoprogram, which automatically scans and memorizes
viewable channels.
INTRODUCTION
These operations are accessible by remote control.
Some may also be accessible by controls on the main unit.
Skip
• You must set [Home] in step 4. Otherwise, the settings of picture and
Please wait while the system is scanning for channels. Auto programming
may take more than 20 minutes to complete.
sound quality you adjusted will not be memorized after you turn off the
unit.
After an initial setup is completed...
0%
Digital channels
0 ch
Analog channels
0 ch
MENU
Skip
• If you want to scan the channels automatically again.
[Autoprogram]
➠ p.19
• You can add the desired cable and analog channels
unmemorized by autoprogram.
[Add Channels]
➠ p.20
• If you want to change to another language.
[Language Selection] ➠ p.21
• If you want to change the location setting.
[Location]
➠ p.30
15
EN
A01QBUF_46MF460BF7_EN_v1.indd 15
2010/04/30 14:36:59
WATCHING TV
Sleepp Timer can be set to automatically turn off the unit after an incremental
period of time.
Press SLEEP repeatedly to change the amount of time (increases
the time by 30 minutes up to 120 minutes) until shut off.
Sleep
120min.
Press SLEEP
P once to call up the display for checking the remaining time.
• To cancel sleep timer, press SLEEP repeatedly until
[Sleep Off] is displayed.
Switching Each Input Mode can easily switch with the remote control
between TV (ATSC or NTSC) and external devices when they are connected to the unit.
Press SOURCE or CH + repeatedly to cycle through the input modes.
Source
e.g.)
TV
11.1
Video1
Video2
Video1
Video2
Component
DTV/TV channel
Component
HDMI1
HDMI2
HDMI3
HDMI3
HDMI2
HDMI1
(or PC input)
• Pressing CH − reverses the direction of the input modes.
Freeze Mode can freeze the image shown on the TV screen for 5 minutes.
Press FREEZE to freeze the image.
Freeze
• The sound output will not be paused.
• To cancel freeze mode, press any buttons except .
Channel Selection
Select channels by using CH + / − or the Number buttons.
• To select the memorized channels,
use CH + / − or the Number buttons.
• To select the non-memorized channels,
use the Number buttons.
11.1
To use the Number buttons
ATSC
.
- When selecting digital channel 11.1
Be sure to press
before entering the subchannel number.
NTSC
- When selecting cable or analog channel 11
Press PREV CH to return to the previously viewed channel.
Note
• [No Signal] will appear on the TV screen after the subchannel broadcast is over.
• [Audio only program] message will appear on the TV screen, when you receive
only sound signal.
16
EN
LC8(LCD)_master draft_EN_v1.indd 16
2010/02/09 21:16:45
English
INTRODUCTION
TV Screen Display
p y Mode
5 types of display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal. And 3 types of display
modes can be selected for PC input signal.
Press FORMAT repeatedly to switch the TV aspect ratio.
For 16:9 video signal
Normal displays a 16:9 picture at its original size.
4:3 displays a 16:9 picture at a 4:3 size; the picture
Normal
4:3
Movie Expand
Movie Expand displays a 16:9 picture that is
vertically stretched to fill the screen. This only crops
out the top of the picture.
Zoom displays a 16:9 picture at its maximum size
PREPARATION
is shortened horizontally. Sidebars appear on both
edges of the screen.
without changing its horizontal and vertical ratio.
Wide displays a horizontally stretched picture. This
crops out the left and right sides of the picture.
Zoom
Normal displays a 4:3 picture at its original size.
For 4:3 video signal
Sidebars appear on both edges of the screen.
16:9 displays a 4:3 picture at a 16:9 size; the picture is
stretched horizontally to fill the screen.
Movie Expand displays a 4:3 picture at a 16:9 size;
16:9
Movie Expand
the picture is stretched more vertically at the top of
the screen. This crops out the top of the picture.
Zoom displays a 4:3 picture at a 16:9 size; at its
maximum size that is more vertically stretched to fill
the screen. This crops out the top and bottom of the
picture.
Wide
HDMI1
Wide displays the picture with its center at the
original size and the edges stretched horizontally to
fill the screen.
Normal displays a proportionately stretched picture.
Sidebars appear on both edges of the screen.
Input mode
Full displays a picture that is stretched out of
proportion horizontally to fill the screen.
Dot By Dot displays a picture in its original size.
Normal
Full
Dot By Dot
TROUBLESHOOTING
For PC input signal through
Zoom
OPTIONAL SETTING
Normal
WATCHING TV
Wide
INFORMATION
Sound Functions
describe how to change the audio or the audio language as well as the volume.
Volume Adjustment
Use VOL + / − to adjust the volume.
Silence Mode
Volume
30
seconds when adjusting the volume.
will be displayed for a few
Press MUTE to turn off the sound temporarily.
hi!
will be displayed for a few seconds.
• Press MUTE again or VOL + / − to recover the
original volume.
Mute
salut!
hola
!
Switching Audio Mode
ATSC
NTSC
Press SAP
P repeatedly to cycle through the available
audio languages.
• Available languages differ depending on the
broadcast.
• [Other] is displayed when the audio language
cannot be acquired, or the acquired languages are
other than English, Spanish or French.
11.1
English 1/3
Press SAP
P to display the currently selected audio mode.
While receiving an MTS broadcast, press repeatedly to cycle through the
available audio channel.
11
SAP / STEREO
e.g.) When all audio are available
SAP / STEREO
SAP / MONO
SAP / STEREO
STEREO : Outputs stereo-audio
SAP
: Outputs second audio program
MONO : Outputs mono-audio
17
EN
LC8(LCD)_master draft_EN_v1.indd 17
2010/02/09 21:16:48
TV Screen Information
Reducing the Brightness
You can display the currently selected channel or other
information such as the audio mode on the TV screen.
In the digital mode, the detailed broadcasting information for
the current channel such as program title, program guides are
displayed.
Backlight brightness can be reduced which may save on power
consumption more than you just set [On] in [Energy Saving
Mode]. ➠ p.30
Press INFO.
Press ECO once to reduce the brightness.
Press ECO again to increase the brightness.
Note
• Even if this function is in effect, the brightness will be increased when you
ATSC
1
2
3
4
KABC
A Day of Memories
A quarter-century ago,which may now qualify as the
good old days of newspapering,run-of-paper sales
accounted for 80 percent of the industry's advertising
revenues.Department stores and supermarket were
11.1
English 1/2
1080i
1080i
HD
HD
Rating
16:9
16:9
CC
CC
TV: TV-14
•
5
6, 7, 8
9
10
NTSC
4
11
SAP / STEREO
480i
480i
SD
SD
4:3
4:3
TV-PG DLSV CC
CC
5
6, 7, 8
9
10
1 program title
2 program guide
(The program guide added to broadcasting
information is displayed to a maximum of 4 lines.)
3 broadcast station
4 channel number
5 audio language (ATSC) / audio mode (NTSC)
[Switching Audio Mode] ➠ p.17
6 effective scanning lines and scan mode
7 TV format
8 program aspect ratio
9 CC (not available if closed caption is set to [Off])
10 child lock rating
change [Energy Saving Mode] on or off due to the energy saving mode has
priority.
You must set [Home] in [Location]. ➠ p.30
Otherwise, the settings you adjusted will not be memorized after you turn
off the unit.
Fun-Link Options
If you have our brand products such as BD player or DVD
recorder that are compatible with Fun-Link functions, connect
them to this unit via an HDMI cable so you can simply operate
various items from this unit's remote control.
Before you begin:
You must set [On] in [Device Control] and
[Fun-Link Control]. ➠ p.29
Otherwise, FUN-LINK OPTIONS
does not work even if
you connected our brand devices to this unit.
To enjoy Fun-Link, verified and recommended devices
are as follows;
MAGNAVOX
SYLVANIA
NB530MGX
NB530SLX
NB500MG1F
NB500SL1
MBP1100 / F7
1
Press FUN-LINK OPTIONS
[Fun-Link Options] menu.
Fun-Link Options
Device-menu
Device-contents
• To clear the display, press INFO again.
You can also press BACK .
Device-favorite
Note
• When the program guide consists of more than 4 lines, use ▲/▼ to scroll.
• [No description provided.] is displayed when the program guide is not
Device-menu
• While the program guide is displayed, the closed caption function is
Device-contents
•
Device-favorite
provided.
interrupted.
In external input mode, the following screen is displayed;
e.g.) When an external device is connected to Video1 Input jack.
Video1
480i
480i
SD
SD
CC
TV-PG DLSV CC
• The information display will automatically disappear in 1 minute.
to display
2
This function allows you to control
the menu of your connected Fun-Link
device.
This function allows you to control the
top menu of your DVD or Blu-ray discs.
This function allows you to control the
pop-up menu of your Blu-ray discs.
Use ▲/▼/◄/► / OK on this unit's remote control to
operate the desired functions for your devices.
Note
• Some of Fun-Link functions may not be available depending on your
Fun-Link devices or discs.
• We do not guarantee 100% interoperability with other brands of HDMI link
compliant devices.
18
EN
LC8(LCD)_master draft_EN_v1.indd 18
2010/02/09 21:16:52
English
Main Menu
Picture
Press MENU.
Sound
Setup
Language
*
USB
Before you begin:
Make sure the unit is connected to antenna or cable.
1
2
3
4
Press MENU to display the main menu.
Use ▲/▼ to select [Setup], then press OK.
Use ▲/▼ to select [Autoprogram], then press OK.
Use ▲/▼ to select an appropriate option, then press OK.
Picture
Picture
Sound
Setup
Features
Select your signal source.
Language
Antenna
Cable
USB
Or
Cable
ANT.IN
• When connected to VHF / UHF antenna,
select [Antenna].
• When connected to CATV, select [Cable].
• [Autoprogram] will begin.
Please wait while the system is scanning for channels. Auto programming
may take more than 20 minutes to complete.
75%
Digital channels
10 ch
Analog channels
6 ch
MENU
INFORMATION
• You can set viewing limitations.
[Fun-Link]
➠ p.29
• You can set Fun-Link options.
[Energy Saving Mode]
➠ p.30
[Location]
➠ p.30
• Switch setting from [Retail] to [Home] to allow the
desired [Picture] and [Sound] mode to be kept in
memory.
[120Hz Clear Pix Engine Demonstration Mode]
➠ p.30
• On Screen Demo will show 120Hz effect.
[Current Software Info]
➠ p.30
Language [Language Selection]
➠ p.21
• Change the Main Menu language.
USB
[MP3 / JPEG Playback]
➠ p.31
• You can listen to MP3 music and view JPEG picture
files stored on a USB flash memory device.
Setup
Back
Antenna
OPTIONAL SETTING TROUBLESHOOTING
[Picture Adjustment]
➠ p.22
[Sound Adjustment]
➠ p.22
[Autoprogram]
➠ p.19
• You can automatically scan the viewable channels.
[Channel List]
➠ p.20
• The Channels that were autoprogrammed are in
this Channel list, use CH + / − to access them.
[Add Channels]
➠ p.20
• You can add TV channels that were not found by
the autoprogram scan.
Features [Closed Caption]
➠ p.24
• You can change the display closed caption format
which displays the dialogue of a TV program or
other text information across the TV screen.
[Child Lock]
➠ p.27
Autoprogram will rescan all channels.
Auto programming may take more than 20
minutes to complete.
Sound
WATCHING TV
Features
If you switch wires (e.g. between antenna and CATV) or if you
move the unit to a different area after the initial setting, or if
you restore the DTV channels you deleted, it is recommended
to use Autoprogram to perform a new channel search.
PREPARATION
This section describes the overview of the main menu
displayed when you press MENU. The main menu consists of
the function setting items below.
Autoprogram
INTRODUCTION
OPTIONAL SETTING
Exit
• When the scanning and memorizing are completed, the
lowest memorized channel will be displayed.
Note
• After setting [Autoprogram], using CH + / − on the remote control skips
unavailable programs automatically.
• If you are not receiving a signal from your cable service, contact the Cable
provider.
• If you press or MENU during autoprogram, the setting will be canceled.
• Even if [Autoprogram] is completed, the channel setting will be lost if the
AC power cord is unplugged before turning off the unit by pressing
.
• The PIN code will be required once you set a PIN code in the [Child Lock].
➠ p.27
• If you want to change your PIN code, follow the instruction of
[Change PIN]. ➠ p. 28
Note
* [USB] will appear only when a USB flash memory device is inserted into
this unit.
19
EN
LC8(LCD)_master draft_EN_v1.indd 19
2010/02/09 21:16:55
Channel List
Add Channels
The channels selected here can be skipped when selecting the
channels using CH + / – .
Those channels can still be selected with the Number buttons.
This function lets you add the channels that were not added
by the autoprogram due to reception conditions at the initial
setting.
1
2
3
4
1
2
3
4
Press MENU to display the main menu.
Use ▲/▼ to select [Setup], then press OK.
Use ▲/▼ to select [Channel List], then press OK.
Use ▲/▼ to select the channel you want to remove, then
press OK.
Press MENU to display the main menu.
Use ▲/▼ to select [Setup], then press OK.
Use ▲/▼ to select [Add Channels], then press OK.
Use the Number buttons to enter the number of the
channel you want to add, then press OK.
11
Picture
DTV
Sound
DTV
11.2
Setup
DTV
11.3
Features
11.1
Highlight channels for Ch Up / Down key selection.
Sound
USB
Setup
Features
Ch Select
OK
Watch/Skip
BACK
Language
Back
• The channel display for the removed channel darkens.
You will not be able to select the channel again using
CH + / – .
• To reactivate a removed channel, use ▲/▼ and press
OK. The registered channels are highlighted.
• When you remove a main channel, its subchannels are
removed as well.
5
Add channels
Picture
Language
Press MENU to exit.
Note
For analog channels, select a channel to be
added using number keys.
For digital channels, you must perform
Autoprogram function.
USB
Ch Change
5
BACK
Back
Press MENU to exit.
Note
• If setup completes successfully, [Added to the channel list] is displayed.
• If external input is used, it is not possible to register the channel and
[Unavailable] will be displayed on the TV screen.
• By using CH + / – , you can select the memorized channels only.
• The channel with the [DTV] indicated on the display is ATSC.
Otherwise the channel is NTSC.
20
EN
LC8(LCD)_master draft_EN_v1.indd 20
2010/02/09 21:17:00
English
Language Selection
ATSC
This function lets you check the digital signal strength of each
channel.
1
2
3
Press MENU to display the main menu.
Use ▲/▼ to select [Setup], then press OK.
Use ▲/▼ to select [Antenna], then press OK.
Press MENU to display the main menu.
Use ▲/▼ to select [Language], then press OK.
Use ▲/▼ to select [English], [Español] or [Français], then
press OK.
Use the Number buttons or CH + / – to select the
channel for which you want to check the digital signal
strength.
Picture
Setup
Features
Language
USB
Select your menu language.
Seleccione el idioma para el menú.
Sélectionnez la langue du menu.
WATCHING TV
Sound
11.1
English
Español
Français
Back
Picture
Setup
Language
Current
50 Max
4
50
USB
Note
CH
• If you need the English menus instead of the Spanish or French menus, press
Ch Change
• If the channel is set to analog (cable) channel or
external input, you cannot confirm the antenna
condition.
Video1
Sound
Setup
Features
Language
Indicator is available for digital
broadcasting only.
USB
CH
MENU. Use ▲/▼ to select [Idioma] or [Langue], then press OK.
Use ▲/▼ to select [English], then press OK.
Press MENU to exit the main menu.
INFORMATION
Back
Picture
5
Press MENU to exit.
OPTIONAL SETTING TROUBLESHOOTING
Sound
Features
PREPARATION
1
2
3
4
You can choose English, Spanish, or French as your on-screen
language.
INTRODUCTION
Antenna Confirmation
Ch Change
MENU to exit.
21
EN
LC8(LCD)_master draft_EN_v1.indd 21
2010/02/09 21:17:10
Picture Adjustment
Sharpness
You can adjust picture mode, or customize the picture quality
as your preference.
Before you begin:
Sharpness
Adjust
4
Move
OK
OK
Color Temperature
Color Temp. Normal
You must set [Home] in [Location]. ➠ p.30
Otherwise, the settings you adjusted will not be memorized
after you turn off the unit.
1
2
3
0
Adjust
Use ▲/▼ to select the item you want to adjust, then press
OK.
Sound
Brightness
30
Setup
Contrast
60
Features
Color
36
Language
Tint
0
USB
Sharpness
0
Normal
120Hz
120Hz
Picture
120Hz
Sound
60Hz
Setup
Features
120Hz technology provides a smoother and
sharper picture in fast-motion scenes.
Language
USB
Adjust the following items.
120Hz
Smart Picture
60Hz
Use ▲/▼ to select the desired setting, then press OK.
([Personal], [Standard], [Sports], [Movie], and [Game])
Press ►
to add cool
colors
Use ▲/▼ to select the desired option, then press OK.
Personal
Color Temperature
OK
◄
to add warm
colors
When the picture is blurred while viewing fast moving
scenes may be corrected using the 120Hz (120 frames
per second) resolution feature.
[120Hz Clear Pix Engine Demonstration Mode] ➠ p.30
Use ▲/▼ to select [Picture], then press OK.
Smart Picture
OK
Press ►
to sharpen
120Hz Clear Pix Engine
Press MENU to display the main menu.
Picture
Move
Press ◄
to soften
Display changes from 60Hz to 120Hz
(120 frames /sec.) for fast moving pictures.
Disables the 120Hz.
Note
• Even if you set to [120Hz], a picture may slow down while viewing fast moving
scenes when you play video games. In this case, set [Smart Picture] to [Game].
Picture
Smart Picture
Personal
Sound
Brightness
Standard
Setup
Contrast
Sports
Features
Color
Movie
Language
Tint
Game
USB
Sharpness
Color Temperature
120Hz
120Hz
Brightness, Contrast, Color, Tint,
Sharpness, Color Temperature
You can only adjust the following options when you set
to [Personal] in [Smart Picture]. Use ▲/▼ to select the
desired setting, then use ◄/► to adjust.
Brightness
Brightness
OK
◄
to decrease
brightness
Press ►
to increase
brightness
OK
Press ◄
to decrease
contrast
Press ►
to increase
contrast
OK
Press ◄
to decrease
color intensity
Press ►
to increase
color intensity
30
Adjust
Move
OK
Contrast
Contrast
60
Adjust
Move
OK
Color
Color
36
Adjust
Move
OK
Tint
Tint
0
Adjust
Move
OK
OK
◄
to add red
Press ►
to add green
5
Press MENU to exit.
Sound Adjustment
You can adjust the sound mode, equalizer and some other
sound functions.
Before you begin:
You must set [Home] in [Location]. ➠ p.30
Otherwise, the settings you adjusted will not be memorized
after you turn off the unit.
1
2
3
Press MENU to display the main menu.
Use ▲/▼ to select [Sound], then press OK.
Use ▲/▼ to select the item you want to adjust, then press
OK.
Picture
Smart Sound
Sound
Equalizer
Setup
Virtual Surround Sound
On
Features
Auto Volume Leveling
Off
Language
TV Speakers
Ext. Amp
USB
Primary MTS
Stereo
Standard
22
EN
LC8(LCD)_master draft_EN_v1.indd 22
2010/02/09 21:17:18
English
Adjust the following items.
Smart Sound
Use ▲/▼ to select the desired setting, then press OK.
([Personal], [Standard], [Movie], [Music], and [News])
Smart Sound
Sound
Equalizer
Standard
Setup
Virtual Surround Sound
Movie
Features
Auto Volume Leveling
Music
Language
TV Speakers
News
USB
Primary MTS
Reduces volume differences between the
TV commercials and the programs.
Off
Removes the auto volume leveling.
TV Speakers
Select the audio output from the unit’s speakers, or not.
If your amplifier is HDMI link function compatible and
connected by an HDMI cable to this unit, some sound
operations such as volume up can be changed by using
this unit’s remote control. Make sure [Fun-Link Control]
is set to [On]. ➠ p.29
Personal
Use ▲/▼ to select the desired option, then press OK.
Sound
Adjust tonal quality for each frequencies. Use ◄/► to
select the specific frequency and use ▲/▼ to adjust the
level, then press OK.
Setup
Features
Language
USB
0
Sound
0
0
0
Ext. Amp
The sound will be output from the unit’s
speakers.
The sound will not be output from the
unit’s speakers.
You can control audio output from your
connected HDMI link devices by using this
unit's remote control.
On
Features
Language
Off
USB
5kHz
Off
0
Setup
120Hz 500Hz 1.5kHz
On
10kHz
Virtual Surround Sound
Virtual surround sound gives you the stereo phonic virtual
space through your existing 2-channel stereo system. Use
▲/▼ to select the desired option, then press OK.
Ext. Amp
Note
• We do not guarantee 100% interoperability with other brands of HDMI
link compliant devices.
OPTIONAL SETTING TROUBLESHOOTING
Picture
"On":
Sound will be output from the TV
speakers.
"Off":
Sound will not be output from the TV
speakers.
"Ext. Amp":
"Operation is possible by connecting to the
HDMI-CEC compatible amp with a HDMI
cable.
For details look in the user manual."
WATCHING TV
Picture
Equalizer
PREPARATION
Picture
On
INTRODUCTION
4
Primary MTS
On
Sound
Off
Setup
Features
You can set the output mode as a default for the sound
mode (NTSC only).
This setting is not interlocked when you change the
output mode by pressing SAP. [Sound Functions] ➠ p.17
This selects the modes for more spatial or
surround sound reproduction.
Language
Use ▲/▼ to select the desired option, then press OK.
USB
On
Emphasized effect.
Off
Natural effect.
Auto Volume Leveling
On
Sound
Off
Setup
Features
Language
Auto Volume Leveling reduces volume
differences between channels and
programs, providing a consistent audio
level.
Smart Sound
Sound
Equalizer
Setup
Virtual Surround Sound
Features
Auto Volume Leveling
Language
TV Speakers
USB
Primary MTS
Stereo
Mono
This function keeps a constant loudness differential
between the TV commercials and the programs.
Use ▲/▼ to select the desired option, then press OK.
Picture
Picture
INFORMATION
Picture
SAP
5
Stereo
Outputs stereo-audio.
Mono
Outputs mono-audio.
SAP
Outputs second audio program.
Press MENU to exit.
USB
23
EN
LC8(LCD)_master draft_EN_v1.indd 23
2010/02/09 21:17:24
Closed Caption
A. Caption Service
You can view closed captioning (CC) for TV programs,
movies and news. Closed caption refers to text of dialogue or
descriptions displayed on-screen.
1
2
3
4
5
Use ▲/▼ to select [Caption Service], then press OK.
Use ▲/▼ to select the desired closed caption, then press
OK.
Press MENU to display the main menu.
Use ▲/▼ to select [Features], then press OK.
Use ▲/▼ to select [Closed Caption], then press OK.
Caption Service
Off
Sound
Digital Caption Service
Off
Setup
Caption Style
Caption Service
Off
Sound
Digital Caption Service
CC-1
Setup
Caption Style
CC-2
CC-3
Features
See the following description for setting each item.
Picture
Picture
Language
CC-4
USB
T-1
T-2
A
B
C
T-3
T-4
Features
Language
USB
CC-1 and T-1
CC-3 and T-3
CC-2, CC-4,
T-2 and T-4
The primary caption and text services. The
captioning or text is displayed in the same
language as the program’s dialogue (up to
4 lines of script on the TV screen, where
it does not obstruct relevant parts of the
picture).
Serve as the preferred data channels.
The captioning or text is often a secondary
language.
Rarely available and broadcasters use them
only in special conditions, such as when
[CC-1] and [CC-3] or [T-1] and [T-3] are
not available.
• There are 3 display modes according to programs:
Paint-on mode
Pop-on mode
Roll-up mode
6
Displays input characters on the TV screen
immediately.
Once characters are stored in memory,
they are displayed all at once.
Displays the characters continuously by
scrolling (max. 4 lines).
Press MENU to exit.
24
EN
LC8(LCD)_master draft_EN_v1.indd 24
2010/02/09 21:17:31
English
C. Caption Style
ATSC
ATSC
You can change the caption style such as font, color or size,
etc.
4
4
Use ▲/▼ to select [Caption Style], then press OK.
5
Use ▲/▼ to select [User Setting], then press OK.
5
Use ▲/▼ to select the desired digital caption service, then
press OK.
Picture
User Setting
Off
Sound
Font Style
Font0
Caption Service
Off
Setup
Font Size
Middle
Sound
Digital Caption Service
CS-1
Features
Font Color
White
Setup
Caption Style
CS-2
Language
Font Opacity
Solid
Features
CS-3
USB
Background Color
Black
Language
CS-4
Background Opacity
Solid
USB
CS-5
Edge Color
Black
CS-6
Edge Type
None
Off
Select if you do not want digital caption
service.
CS-1 to CS-6
Select one of these before changing
any other item in [Closed Caption]
menu. Choose [CS-1] under normal
circumstances.
Press MENU to exit.
Note
• [Digital Caption Service] that you can switch differs depending on the
broadcast description.
6
7
Use ▲/▼ to select [On], then press OK.
Use ▲/▼ to select an item, then press OK. Then use
▲/▼ to select the desired setting and press OK.
Picture display
S o, yo u must
m u s t b e Ph
P h ilip.
i l i p. H ii!!
I’m pleased
ple ased to meet
me et yo u.
Edge
(Edge Color and Edge Type)
• The setting description for each item is shown on the
next page.
• Review your setting choice made on the next page
by looking in the upper right corner of the displayed
setting box (not all selections show the differences
selected).
INFORMATION
Font
(Font Style, Font Size, Font Color and Font Opacity
or Transparency)
Background
(Background Color and Background Opacity or
Transparency)
OPTIONAL SETTING TROUBLESHOOTING
Picture
WATCHING TV
6
Use ▲/▼ to select [Digital Caption Service], then press
OK.
PREPARATION
In addition to the basic closed caption, DTV has its own closed
caption called digital caption service. Use this menu to change
the settings for digital caption service.
INTRODUCTION
B. Digital Caption Service
25
EN
LC8(LCD)_master draft_EN_v1.indd 25
2010/02/09 21:17:34
Font Style
Background Opacity
Closed Caption
Closed Captioning font style
can be changed as illustrated.
Closed Caption
Background opacity of the
displayed caption can be
switched as illustrated.
Solid
Flash
Translucent
Transparent
Font Size
Font size of the displayed
caption can be switched as
illustrated.
Edge Color
Closed Caption
Edge color of the displayed
caption can be switched as
illustrated.
Large
Closed Caption
White
Black
Middle
Red
Small
Green
Blue
Yellow
Magenta
Cyan
Font Color
Font color of the displayed
caption can be switched as
illustrated.
Font Opacity
Black
Red
None
Green
Raised
Blue
Depressed
Yellow
Uniform
Magenta
L. Shadow
Cyan
R.Shadow
Closed Caption
8
Press MENU to exit.
Note
• Closed caption will not be displayed when you are using an HDMI
Solid
Flash
Translucent
Transparent
Background color of the
displayed caption can be
switched as illustrated.
Closed Caption
Edge type of the displayed
caption can be switched as
illustrated.
White
Font opacity of the displayed
caption can be switched as
illustrated.
Background Color
Edge Type
Closed Caption
Closed Caption
connection.
• To show the closed caption on your TV screen, broadcast signal must
contain the closed caption data.
• Not all TV programs and commercials have the closed caption or all types
of the closed caption.
• Captions and texts may not exactly match the TV voice.
• Changing channels may delay the closed caption for a few seconds.
• Adjusting or muting the volume may delay the closed caption for a few
seconds.
• Abbreviations, symbols and other grammatical shortcuts may be used in
White
Black
Red
order to keep pace with the on-screen action. This is not a malfunction.
• The caption or text characters will not be displayed while the main menu
or functions display is shown.
• If a black box appears on the TV screen, this means that the closed caption
Green
Blue
Yellow
•
Magenta
Cyan
•
•
is set to the text mode. To clear the box, select [CC-1], [CC-2], [CC-3],
[CC-4] or [Off].
If the unit receives poor quality television signals, the captions may contain
errors, or there might be no captions at all. Some possible causes of poor
quality signals are:
- Automobile ignition noise
- Electric motor noise
- Weak signal reception
- Multiplex signal reception (ghosts or screen flutter)
- Data dropout and Pixelation (for DTV only)
The unit retains the closed caption setting if the power fails.
When the unit receives special effects playback signal (e.g. Search, Slow
and Still) from a VCR’s video output channel (ch3 or ch4), the unit may not
display the correct caption or text.
26
EN
LC8(LCD)_master draft_EN_v1.indd 26
2010/02/09 21:17:37
English
A. Channel Lock
Child lock reads the ratings for programs, then denies access
to the programs which exceed the rating level you set. With
this function, you can block certain programs inappropriate
for children and any channels or external input modes can be
invisible.
Press MENU to display the main menu.
5
6
Use ▲/▼ to select [Features], then press OK.
Use ▲/▼ to select [Channel Lock]
k , then press OK.
Use ▲/▼ to select the desired rating, then press OK
repeatedly to switch between [View] and [Block]
k.
Use ▲/▼ to select [Child Lock]
k , then press OK.
Picture
Video1
Sound
Closed Caption
Features
Sound
Child Lock
Language
Setup
Fun-Link
USB
Features
Energy Saving Mode
Language
120Hz demo
USB
Location
HDMI 1
HDMI 2
HDMI 3
Select
Enter PIN.
Language
Press MENU to exit.
Channel Lock
Sound
US Movie Ratings Lock
Setup
US TV Ratings Lock
Features
Canadian English Rating
Language
Canadian French Rating
USB
Region Ratings Lock
US Movie ratings lock is the rating system created by MPAA.
5
A
B
C
6
Use ▲/▼ to select [US Movie Ratings Lock], then press
OK.
Use ▲/▼ to select the desired rating, then press OK
repeatedly to switch between [View] and [Block]
k.
D
Note
Picture
X
Sound
NC-17
Setup
R
Features
PG-13
Language
PG
USB
G
NR
• When you select a rating and set it to [Block], the higher ratings will be
•
•
•
•
Back
INFORMATION
Picture
Change PIN
•
BACK
B. Setting US Movie ratings
_
• When you have not set up your PIN code,
enter 0, 0, 0, 0.
• When the PIN code is correct, [Child Lock] menu is
displayed.
See the following description for setting each item.
•
View / Block
Use the Number buttons to enter the 4-digit numbers for
your PIN code.
Features
•
OK
OPTIONAL SETTING TROUBLESHOOTING
7
Current Software Info
4
Component
On
Home
WATCHING TV
Video2
Setup
Picture
PREPARATION
1
2
3
Particular channels or external input modes can be invisible in
this function.
INTRODUCTION
Child Lock
Select
blocked automatically. The lower ratings will be available for viewing.
When you set the highest rating to [View], all ratings turn to [View]
automatically.
To block any inappropriate programs, set your limits in [US Movie Ratings
Lock], [US TV Ratings Lock] and [Region Ratings Lock].
The child lock setting will be retained after a power failure (except the PIN
code reverts to 0000).
If the rating is blocked, will appear.
[Region Ratings Lock] will be available when the unit receives a digital
broadcast using the new rating system.
For the United States, the unit may download the Region Ratings Lock Table,
if required.
The Canadian rating systems on this unit are based on CEA-766-A and
CRTC policy.
Rating
7
OK
View / Block
BACK
Back
Category
X
Mature audience only
NC-17
No one under 17 admitted
R
Restricted; under 17 requires accompanying
parent or adult guardian
PG-13
Unsuitable for children under 13
PG
Parental guidance suggested
G
General audience
NR
No rating
Press MENU to exit.
27
EN
LC8(LCD)_master draft_EN_v1.indd 27
2010/02/09 21:17:45
C. Setting TV ratings
5
6
D. Change PIN
Use ▲/▼ to select [US TV Ratings Lock]
k , then press OK.
Use ▲/▼ / ◄/► to select the desired rating, then press
OK
K repeatedly to switch between [View] and [Block]
k.
Picture
FV
Sound
TV-MA
Setup
TV-14
Features
TV-PG
Language
TV-G
USB
TV-Y7
V
S
L
Although the default PIN code (0000) is supplied with the unit,
you can set your own PIN code.
5
6
D
Use ▲/▼ to select [Change PIN], then press OK.
Press the Number buttons to enter the new 4-digit PIN
code.
• Enter PIN code again in [Confirm PIN.] entry field.
Picture
Sound
TV-Y
Select
Rating
7
OK
BACK
View / Block
Setup
Back
Features
Language
Category
Enter PIN.
_
Confirm PIN.
USB
TV-MA
Mature audience only
TV-14
Unsuitable for children under 14
higher
TV-PG
Parental guidance suggested
TV-G
General audience
7
TV-Y7
Appropriate for all children 7 and
older
Note
TV-Y
Appropriate for all children
PIN Code
lower
BACK
Back
Press MENU to exit.
• Make sure new PIN code and confirm PIN code must be exactly the same.
If they are different, the space is cleared for reentering.
• Your PIN code will be erased and return to the default (0000) when a
Press MENU to exit.
To set the sub ratings
As for TV-MA, TV-14, TV-PG, or TV-Y7, you can further set
the sub ratings to block specific elements of programming.
To set the sub ratings, follow the step below.
power failure occurs.
If you forget the PIN code, unplug the AC power cord while turning the unit
on, wait for 10 seconds to plug the AC power cord again.
The unit will restore the PIN code to 0000 as the factory default.
Use ▲/▼ / ◄/► to select the desired rating, then press
OK repeatedly to switch between [View] and [Block].
Picture
FV
Sound
TV-MA
Setup
TV-14
Features
TV-PG
Language
TV-G
USB
TV-Y7
V
S
L
D
TV-Y
Select
Sub Rating
OK
Category
View / Block
BACK
Back
Rating
FV
Fantasy Violence
TV-Y7
V
Violence
S
Sexual Situation
L
Coarse Language
TV-MA
TV-14
TV-PG
D
Suggestive Dialogue
TV-14, TV-PG
Note
• Blocked sub rating will appear beside the main rating category in
[US TV Ratings Lock] menu.
• You cannot block a sub rating (D, L, S or V) if the main rating is set to
[View].
• Changing the category to [Block] or [View] automatically changes all its sub
ratings to the same ([Block] or [View]).
28
EN
A01QBUF_46MF460BF7_EN_v1.indd 28
2010/05/07 15:43:07
English
Auto TV On
This unit will turn on detected when the power on signal
is sent from your connected Fun-Link device.
Use ▲/▼ to select the desired setting, then press OK.
This function allows you to operate the linked functions
between our brand devices with a Fun-Link feature and this
unit connecting through an HDMI cable.
Press MENU to display the main menu.
Picture
On
Use ▲/▼ to select [Features], then press OK.
Sound
Off
Use ▲/▼ to select [Fun-Link], then press OK.
Features
Setup
PREPARATION
1
2
3
When set to "On", TV and connected device
are turned on automatically.
Language
USB
Fun-Link Control
On
Sound
Auto Device Off
On
Setup
Auto TV On
On
Features
Device Control
On
Language
Device List
On
USB
Off
This unit turns on automatically when you turn on
your connected Fun-Link device.
This unit stays off even if you turn on your
connected Fun-Link device.
Device Control
You can operate some functions such as disc playback or
call up the menu of the connected devices, by using this
unit’s remote control.
Use ▲/▼ to select the desired setting, then press OK.
▲/▼ to select the desired setting, then press OK.
Adjust the following items.
Fun-Link Control
Set the Fun-Link [On] or [Off].
The following additional settings will be grayed out when
you set to [Off].
Use ▲/▼ to select the desired setting, then press OK.
Picture
On
Sound
Off
Setup
When set to "On", the connected device is
controlled using the remote control.
Features
Language
USB
On
Picture
Off
Sound
Setup
Features
When set to "On", Fun-Link functions are
enabled.
USB
On
Off
On
Off
Selects if you have connected an external device
that is compatible with the Fun-Link function.
Disables all Fun-Link.
Device List
Auto Device Off
This function lets you see the product model number or
name of connected devices.
You can set your device to turn off by interlocking from
this unit’s power.
Use ▲/▼ to select the desired setting, then press OK.
Picture
On
Sound
Off
Setup
Features
When set to "On" and TV is turned off,
connected devices are turned off
automatically.
PLAY B / STOP C/ FWD D / REV E / SKIP G /
SKIP H/ PAUSE F/ FUN-LINK OPTIONS
/
▲/▼/◄/► / OK / BACK /
the Number buttons / RED/ GREEN/ BLUE/
YELLOW can be used to control your connected
Fun-Link devices by this unit's remote control.
Disables the device control.
Use ▲/▼ to select the desired HDMI device listed on
the TV screen, then press OK.
Picture
Sound
Setup
HDMI1
NB530MGX
HDMI2
MBP1100 / F7
Features
Language
Language
USB
USB
Select
On
Off
INFORMATION
Language
OPTIONAL SETTING TROUBLESHOOTING
4
5
WATCHING TV
Picture
INTRODUCTION
Fun-Link
Your connected Fun-Link device turns off
automatically when you turn off the unit.
Your connected Fun-Link device stays on even if
you turn off the unit.
6
OK
Input Change
BACK
Back
Press MENU to exit.
29
EN
A01QBUF_46MF460BF7_EN_v1.indd 29
2010/05/07 15:43:18
Energy Saving Mode
You can set whether the power consumption is saved or not.
1
2
3
4
You can check differences of between 60Hz and 120Hz
Refresh Rate with this demonstration mode.
Press MENU to display the main menu.
Use ▲/▼ to select [Features], then press OK.
Use ▲/▼ to select [Energy Saving Mode], then press OK.
Use ▲/▼ to select the desired mode, then press OK.
Picture
On
Sound
Off
Setup
Features
120Hz Clear Pix Engine
Demonstration Mode
1
2
3
4
Press MENU to display the main menu.
Use ▲/▼ to select [Features], then press OK.
Use ▲/▼ to select [120Hz demo], then press OK.
Use ▲/▼ to select [Start now], then press OK.
120Hz
60Hz
When set to “On”, power consumption is reduced
by decreasing backlight brightness.
Language
USB
5
On
Reduces the power consumption.
Off
Set the backlight brighter.
Press MENU to exit.
120Hz technology provides a smoother and sharper picture in fast-motion scenes.
120Hz
Displays 120Hz picture.
60Hz
Displays normal 60Hz picture.
5
Press MENU to exit.
Location
You must set [Home] in this setting. Otherwise, [Picture] and
[Sound] settings you adjusted will not be memorized after you
turn off the unit. Refer to page 22-23.
1
2
3
4
Press MENU to display the main menu.
Use ▲/▼ to select [Features], then press OK.
Use ▲/▼ to select [Location], then press OK.
Use ▲/▼ to select the desired location, then press OK.
Current Software Info
This function shows what version of the software currently
used.
1
2
3
4
Press MENU to display the main menu.
Use ▲/▼ to select [Features], then press OK.
Use ▲/▼ to select [Current Software Info], then press
OK.
Confirm the version of the software currently used.
Retail
Home
Sound
Setup
Features
Language
Back
Location Home is recommended for
normal home use.
In the Retail Store mode, all settings are
fixed.
Sound
Setup
Features
USB
Release Version:
XXXXXXX_XXX_X_XXXX
Language
USB
5
Press MENU to exit.
5
Press MENU to exit.
30
EN
A01QBUF_46MF460BF7_EN_v1.indd 30
2010/05/07 15:43:25
English
Picture
Use ▲/▼ to select the desired file, and then press OK
K or
►(cursor).
This unit can play MP3 music and JPEG picture files.
Use the USB flash memory device contains those files.
USB
1
Insert the USB flash memory device to the USB terminal
of this unit.
Image1.jpg
Image 1.jpg
Image 2.jpg
PREPARATION
Image 3.jpg
• The main menu appears automatically.
2
Picture
Picture
INTRODUCTION
MP3 / JPEG Playback
Image 4.jpg
Use ▲/▼ to select [USB] and press OK.
The highlight will move to the name of your USB flash
memory device, then press OK
K again.
Image 5.jpg
Image 1.jpg
1200:900
2009:04:02 17:42:06
1
2 Thumbnails
3
4
Press “OK” key to play/pause.
• To toggle between [List] and [Thumbnails],
press the Number 2 button.
• The unit goes to the slide show automatically.
To pause / begin the slide show, press OK.
• You can use the Number buttons (between 1 and 4) to
see the file detail (➀) or change the following settings
(➁~➃).
Your USB
Sound
This menu allows you to enjoy your photos and
music via your USB device.
Setup
Features
Language
USB
3
Use ▲/▼ to select [Picture] or [Music], and then press
OK
K or ►(cursor).
Music
Music1.mp3
Title:
Music2.mp3
Artist:
None
Album:
Easy Symphony
Duration:
00:04:28
Year:
2007
➃
Press 4 or OK to start the slide show.
While the slide show is on, the following 2 settings
will be displayed.
Press 2, then use ▲/▼ to select the way of the
transition mode choosing from;
➁
Transitions [None], [Dissolve], [Wipe right], [Wipe left],
[Wipe up], [Wipe down], [Box in] and [Box out].
Music
Music1.mp3
Press 1 to display file details below.
[Name], [Album], [Date], [Size] and [Next].
Press 1 again to remove file details.
Start show
Use ▲/▼ to select the desired file, and then press OK
or ►(cursor).
USB
➀
More detail
Music
Music1
Press 3, then use ▲/▼ to change the display time
choosing from; [Short], [Medium] and [Long].
➃
Press 4 or OK to stop the slide show.
While the slide show is off, the following 2 settings
will be displayed.
2
3
➁
Every press on 2 will turn the picture clockwise by
90 degrees.
➂
Press 3, then use ▲/▼ to select the zoom factor
(1x, 2x or 4x). Press OK to set the zoom factor.
4
Rotate
• Playback will begin from the file you choose.
To pause / begin the playback, press OK.
• You can use the Number buttons (between 1 and 3) to
see the file detail (➀) or change the following settings (➁
or ➂).
Item
Zoom
4
Press MENU to exit.
Detail
➀
Press 1 to display file details below.
[Title], [Artist], [Album], [Duration] and [Year].
Press 1 again to remove file details.
➁
Press 2 to play back the desired file repeatedly.
Press 2 to play back the all files in the folder
repeatedly.
To cancel the repeat playback, press 2 until [ ] or
[ ] disappears.
• The USB flash memory device is not supplied with this unit.
• We do not guarantee all USB flash memory devices can be supported by
Press 3 to play back the music randomly.
To return to the normal playback, press 3 again.
•
More detail
Repeat
➂
Shuffle
INFORMATION
➂
Slide time
Stop show
1
Detail
OPTIONAL SETTING TROUBLESHOOTING
Item
WATCHING TV
Picture
Note
• To go back to the previous screen (except when the [List] is displayed),
press ◄.
this unit.
• Be sure to keep a backup copy of the original files on your device before
you play them back on this unit. We have no responsibilities for damage or
loss of your stored data.
When you are ready to remove a USB flash memory device, at first turn off
the unit to avoid any damage for your data and the unit.
It is recommended that files to be played back in this unit are recorded
under the following specifications:
<MP3>
• Sampling frequency : 32 kHz or 44.1 kHz or 48 kHz
32 kbps - 320 kbps
• Constant bit rate :
<JPEG>
24 Mpixel
• Upper limit :
31
EN
LC8(LCD)_master draft_EN_v1.indd 31
2010/02/09 21:18:44
TROUBLESHOOTING
Troubleshooting Guide
If the unit does not perform properly when operated as instructed in this manual,
check the followingg chart and all connections once before callingg for service.
Symptom
No power
Control button does not work.
Power is ON but no screen
image.
Remedy
•
•
•
•
•
•
•
•
•
•
•
•
•
No picture or sound
•
•
•
•
•
•
Make sure the AC power cord is plugged in.
Make sure that the AC outlet supplies the proper voltage, plug another electrical
appliance into the AC outlet to ensure that AC outlet operates normally.
If a power failure occurs, unplug the AC power cord for 1 minute to allow the unit to
reset itself.
Press only one button at a time. Do NOT press more than one button at the same time.
Ensure that no buttons on the remote are depressed and move freely.
Check whether the connection of the antenna, cable receiver or satellite box is
connected correctly.
Check whether all the cables to the unit are connected to the correct output jack of
your device like BD / DVD recorder.
Make sure that the selected input mode is connected to the working input jack.
Check if your computer is NOT in sleep mode when the input mode of this unit is in PC
mode. Tap any key on the keyboard to wake up your computer.
Check if the power is on.
Check if the right input mode is selected.
Check whether all the cables to the unit are connected to the correct output jack of
your device like BD / DVD recorder.
View other TV channels. The problem might be limited to the broadcasting station or
weak signal strength.
Turn off the unit and wait for about 1 minute, then turn on the unit again.
Check whether the connection of the antenna, cable receiver or satellite box is
connected correctly.
Make sure that the selected input mode is connected to the working input jack.
Check if your computer is NOT in sleep mode when the input mode of this unit is in PC
mode. Tap any key on the keyboard to wake up your computer.
Make sure that the sound is not muted. Press MUTE so that the volume bar and current
volume level will appear on the TV screen.
Make sure that the volume is NOT set to [0] or [Mute]. If so, use VOL +/–– to adjust the
desired volume.
View other TV channels. The problem might be limited to the broadcasting station.
Adjust [Color] in the main menu.
No color
•
•
Adjusted [Picture] or [Sound]
settings are not effective every
time the unit is turned on.
•
You must set [Home] in [Location]. ➠ p.30
Otherwise, the settings you adjusted will not be memorized after you turn the unit off.
•
•
•
•
Electrical interference from nearby appliances may affect picture quality.
Adjust [Contrast] and [Brightness] in the main menu.
View other TV channels. The problem might be limited to the broadcasting station or
weak signal strength.
For the best picture quality, watch "High Definition" wide screen programs.
If the HD content is not available, watch "Standard Definition" programs instead.
View other TV channels. The problem might be limited to the broadcasting station or
weak signal strength.
Check if the audio cable is connected in correctly.
You may be getting interference from electrical appliances, automobiles, motorcycles or
fluorescent lights.
Try moving the unit to another location to see if this is the cause of the problem.
•
•
Electrical interference from nearby appliances may affect picture quality.
View other TV channels. The problem might be limited to the broadcasting station.
Sound OK, picture poor
•
Picture OK, sound poor
You see a distorted picture or
hear an unusual sound.
Ghosts, lines or streaks in picture
•
•
•
32
EN
A01QBUF_46MF460BF7_EN_v1.indd 32
2010/05/07 15:43:31
English
INTRODUCTION
Remedy
View other TV channels. The problem might be limited to the broadcasting station,
missing data or pixelation.
•
•
This unit will memorize the volume level from the last time you adjusted it.
If the volume of the sound from another device is higher or lower, then the loudness will
change.
•
This unit will memorize the viewing mode from the last time you used the particular
input modes.
The display image does not cover •
the entire screen.
If you are watching TV or using the Composite Video, S-Video, Component Video or
HDMI with 480i Input, press FORMAT
T repeatedly to switch various screen modes.
Captions are displayed as a white
box.
•
No caption is displayed in the
•
Closed Caption-supported
program.
Interference from buildings or weather conditions may cause captioning to be incomplete.
Broadcasting station may shorten the program to insert advertisement.
The closed caption decoder cannot read the information of the shortened program.
Black box is displayed on the TV
screen.
The text mode is selected for caption. Select [CC-1], [CC-2], [CC-3], [CC-4] or [Off].
You switch to a different input
and the volume changes.
You switch to a different input
and the screen size changes.
•
Note
This is not to be considered a defect in the LCD screen.
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual for more details on correct operations.
INFORMATION
• The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a fixed point of blue, green or red.
TROUBLESHOOTING
•
Different color marks on the TV
screen
OPTIONAL SETTING
When the capabilities of the unit exceed the capabilities of the digital broadcasting, the
signal will be increased to match the capabilities of the display of the unit. This may cause
noise or trash.
You see "noise" or "trash" on the
screen.
WATCHING TV
•
PREPARATION
Symptom
33
EN
LC8(LCD)_master draft_EN_v1.indd 33
2010/02/09 21:18:50
FAQ
Question
Answer
•
•
•
•
My remote control does not
work.
What should I do?
•
•
•
•
•
How come the Initial setup
appears every time I turn on
this unit?
Why I cannot watch some RF
signal TV programs.
•
•
Connect the RF coaxial cable to the unit directly and run the initial setup.
Make sure to complete the channel scan before turning off the unit.
•
•
Make sure [Autoprogram] has been completed. ➠ p.19
Autoprogram must be completed when you set up the unit for the first time or move it
to a location where previously unavailable channels are broadcast.
The selected channel may not be broadcasting.
When [Autoprogram] is interrupted and not completed, some channels will not be
received. Make sure to complete. ➠ p.19
The selected channel cannot be viewed by the [Child Lock] setting. ➠ p.27
The unit requires some kind of antenna input. An indoor antenna
(VHF /UHF), an external antenna (VHF /UHF) or an RF coaxial cable from your wall
cable/satellite box needs to be plugged into the unit.
•
•
•
•
•
How come there is no image
from the connected external
devices?
Check the antenna or cable connection to the main unit.
Check the batteries of the remote control.
Check if there is an obstacle between the infrared sensor window and the remote
control.
Test the signal output. If OK, then possible infrared sensor trouble.
[IR Signal Check] ➠ p.35
Aim the remote control directly at the infrared sensor window on the front of the unit.
Reduce the distance to the unit.
Re-insert the batteries with their polarities (+/– signs) as indicated.
When there is an infrared-equipped device such as PC near this unit, it may interrupt
the remote control signal of this unit.
Move the infrared-equipped device away from this unit, change the angle of the infrared
sensor or turn off the infrared communication function.
•
•
Check if the right input mode is selected by pressing SOURCE or using CH + / −.
[Switching Each Input Mode] ➠ p.16
Check the antenna or cable connection to the unit.
When using the Component Video Connection check that the Green (Y), Blue (Pb/Cb)
and Red (Pr/Cr) connectors are connected to their corresponding colored jacks on the
unit.
•
Many digital channels have alternate channel numbers.
The unit changes the numbers automatically to the ones signifying the broadcasting
station channel number.
These basic numbers used for previous analog broadcasts.
(e.g., input ch#30 auto change to ch#6.1)
Why are captions not displayed
entirely?
Or, captions are delayed behind
the dialogue.
•
Captions that are delayed a few seconds behind the actual dialogue are common for live
broadcasts. Most captioning production companies can display a dialogue to maximum
of 220 words per minute. If a dialogue exceeds that rate, selective editing is used to
insure that the captions remain up-to date with the current TV screen dialogue.
How can I set the clock ?
•
There is no clock function on this unit.
Whenever I entered channel
number,
it changes automatically.
34
EN
LC8(LCD)_master draft_EN_v1.indd 34
2010/02/09 21:18:51
English
INTRODUCTION
INFORMATION
Glossary
Maintenance
ATSC
Aspect Ratio
The width of a TV screen relative to its height. Conventional TVs
are 4:3 (in other words, the TV screen is almost square); widescreen
models are 16:9 (the TV screen is almost twice as wide as its height).
This is a video signal format that conveys each of 3 principal colors
of light (red, blue and green) through different signal lines. This allows
the viewers to experience picture colors as original as it is. There are
several signal formats, including Y / Pb / Pr and Y / Cb / Cr.
Dolby Digital
HDMI (High-Definition Multimedia Interface)
Interface that supports all uncompressed, digital audio / video formats
including set-top box, BD / DVD recorder or digital television, over a
single cable.
HDTV (High Definition TV)
NTSC
Acronym that stands for National Television Systems Committee and
the name of analog broadcasting standards.
Off the air NTSC signals are no longer being sent by major
broadcasting stations in the USA.
PIN code
SAP (Secondary Audio Program)
Second-audio channel delivered separately from main-audio channel.
This audio channel is used as an alternate in bilingual broadcasting.
SDTV (Standard Definition TV)
Standard digital format that is similar to the NTSC picture quality.
S-Video
Offers higher quality images by delivering each signal, color (c) and
luminance (y) independently of each other through a single cable.
Servicing
Should your unit become inoperative, do not try to correct
the problem yourself. There are no user serviceable parts
inside. Turn off the unit, unplug the AC power cord and call
our toll free customer support line found on the cover of this
manual to locate an authorized service center.
IR Signal Check
If the remote control is not working properly, you can use a
digital camera (including a cellular phone with built-in camera)
to see if it is sending out an infrared signal.
With a digital camera
(including built-in cell phone cameras):
Point the Digital Camera towards the remote
control infrared diode at the front of the
remote control. Press any button on the
remote control and look through the camera
display. If the infrared pulsating light appears
through the camera, the remote control is
sending out an IR signal.
INFORMATION
A stored 4-digit number that allows access to parental control features.
Panel Cleaning
Wipe the panel of the unit with a soft cloth. Before cleaning
the panel, disconnect the AC power cord.
TROUBLESHOOTING
Ultimate digital format that produces high resolution and high picture
quality.
•
Wipe the front panel and other exterior surfaces of the
unit with a soft cloth immersed in lukewarm water and
wrung dry.
Never use a solvent or alcohol. Do not spray insecticide
liquid near the unit. Such chemicals may cause damage and
discoloration to the exposed surfaces.
OPTIONAL SETTING
The system developed by Dolby Laboratories to compress digital
sound. It offers stereo sound (2ch) or multi-channel audio.
•
WATCHING TV
Component Video
Cabinet Cleaning
PREPARATION
Acronym that stands for Advanced Television Systems Committee and
the name of the digital broadcasting standards.
35
EN
LC8(LCD)_master draft_EN_v1.indd 35
2010/02/09 21:18:51
General Specifications
TV format
ATSC / NTSC-M TV standard
Closed caption system
§15.122 / FCC (digital CC)
§15.119 / FCC (analog CC)
Channel coverage (ATSC / NTSC)
Terrestrial DTV (ATSC)
VHF 2~13
UHF 14~51 each channel has e.g.)
2.1~2.9, 3.1~3.9, etc.
Terrestrial Analog (NTSC)
VHF 2~13
UHF 14~69
CATV
2~13, A~W,
W+1~W+94 (analog W+1~W+84),
A-5~A-1, 5A
Tuning system
Channel frequency synthesized tuning
system
Channel access
Direct access keyboard,
Programmable scan, and up / down
Other Specifications
Terminals
Antenna Input VHF / UHF / CATV
Audio Input
RCA jack (L/R)
R x8
Composite Video Input
RCA jack x 2
S-Video Input Mini DIN 4pin jack x 2
Component Video Input
RCA jack x 3
HDMI Input
HDMI 19 pin x 3
USB Input
USB x 1
Coaxial Digital Audio Output
RCA jack x 1
Audio Output RCA jack (L/R)
R x2
75 Ω unbalanced (F-type)
500mV rms
1V p-p (75 Ω)
Y
1V p-p (75 Ω)
C
286 mV p-p (75 Ω)
Y
1V p-p (75 Ω)
Pb/Cb 700 mV p-p (75Ω)
Pr/Crr 700 mV p-p (75Ω)
500 mV p-p (75 Ω)
500 mV rms
Remote control
Digital encoded infrared light system
Operating temperature
Electrical Specification
Audio Output
10W, 8 Ω x 2
41 °F (5 °C) to 104 °F (40 °C)
Power requirements
120V~ AC +/–– 10 %, 60 Hz +/–– 0.5 %
Power consumption (maximum)
228 W
46 inches full HD panel
<without base>
Width 44.3 inches(1125.0 mm)
Height 28.4 inches(719.0 mm)
Depth 4.4 inches(109.5 mm)
48.15 lbs. (21.84 kg)
Weight
LCD
Dimensions
•
•
<with base>
44.3 inches(1125.0 mm)
30.4 inches(770.5 mm)
11.7 inches(295.0 mm)
53.58 lbs. (24.30 kg)
Designs and specifications are subject to change without
notice and without our legal obligation.
If there is a discrepancy between languages, the default
language will be English.
36
EN
LC8(LCD)_master draft_EN_v1.indd 36
2010/02/09 21:18:52
English
INTRODUCTION
LIMITED WARRANTY
NINETY (90) DAY LABOR / ONE (1) YEAR PARTS
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements
can result in delay.
to any hardware product or any software, even if packaged or
sold with the product, as manufacturers, suppliers, or publishers
may provide a separate warranty for their own products packaged with the bundled product.
The company is not liable for any damage to or loss of any programs, data, or other information stored on any media contained
within the product, or other additional product or part not covered by this warranty. Recovery or reinstallation of programs,
data or other information is not covered under this Limited
Warranty.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
can be provided.
• Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE…
Contact the Customer Care Center at:
1-866-341-3738
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON
THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
ON THIS PRODUCT IS LIMITED IN DURATION TO THE
DURATION OF THIS WARRANTY.
INFORMATION
WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS:
This Limited Warranty applies only to new company manufac-
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or
TROUBLESHOOTING
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
tent for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of the company.
• Damage or claims for products not being available for use, or
for lost data or lost software.
• Damage from mishandled shipments or transit accidents when
returning product.
OPTIONAL SETTING
WHAT IS COVERED:
This warranty covers new products if a defect in material or
workmanship occurs and a valid claim is received within the
Warranty Period. At its option, the company will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or serviceable used parts and is at least functionally equivalent or most
comparable to the original product in current inventory, or (3)
refund the original purchase price of the product.
Replacement products or parts provided under this warranty are
covered against defects in materials and workmanship from the
date of the replacement or repair for ninety (90) days or for the
remaining portion of the original product’s warranty, whichever
provides longer coverage for you. When a product or part is
exchanged, any replacement item becomes your property and the
replaced item becomes company property. When a refund is
given, your product becomes company property.
This Limited Warranty does not cover:
• Shipping charges to return defective product.
• Labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.
• Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
WATCHING TV
WHO IS COVERED:
This product warranty is issued to the original purchaser or the
person receiving the product as a gift against defects in materials
and workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
mission, or (d) if any serial number has been removed or defaced,
or (e) product, accessories or consumables sold “AS IS” without
warranty of any kind by including refurbished product sold “AS
IS” by some retailers.
PREPARATION
WARRANTY COVERAGE:
This warranty obligation is limited to the terms as set forth
below.
Some states do not allow the exclusions or limitation of incidental or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations or exclusions may
not apply to you.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-supplied product,
(b) to damage caused by service performed by anyone other than
company approved Authorized Service Location, (c) to a product
FUNAI CORPORATION, Inc. 19900 Van Ness Avenue, Torrance, CA 90501
Printed in USA
37
EN
LC8(LCD)_master draft_EN_v1.indd 37
2010/02/09 21:18:54